net: bcmgenet: improve bcmgenet_mii_setup()

bcmgenet_mii_setup() is called from the PHY state machine every 1-2 seconds
when the PHYs are in PHY_POLL mode.

Improve bcmgenet_mii_setup() so that it touches the MAC registers only when
the link is up and there was a change to link, speed, duplex, or pause status.

Signed-off-by: Petri Gynther <pgynther@google.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Petri Gynther 2014-10-03 12:25:01 -07:00 committed by David S. Miller
parent f13909cdab
commit 5ad6e6c508
3 changed files with 48 additions and 31 deletions

View File

@ -2162,9 +2162,10 @@ static void bcmgenet_netif_stop(struct net_device *dev)
*/
cancel_work_sync(&priv->bcmgenet_irq_work);
priv->old_pause = -1;
priv->old_link = -1;
priv->old_speed = -1;
priv->old_duplex = -1;
priv->old_pause = -1;
}
static int bcmgenet_close(struct net_device *dev)

View File

@ -548,8 +548,9 @@ struct bcmgenet_priv {
u16 gphy_rev;
/* PHY device variables */
int old_duplex;
int old_link;
int old_speed;
int old_duplex;
int old_pause;
phy_interface_t phy_interface;
int phy_addr;

View File

@ -82,24 +82,33 @@ static void bcmgenet_mii_setup(struct net_device *dev)
struct bcmgenet_priv *priv = netdev_priv(dev);
struct phy_device *phydev = priv->phydev;
u32 reg, cmd_bits = 0;
unsigned int status_changed = 0;
bool status_changed = false;
if (priv->old_link != phydev->link) {
status_changed = 1;
status_changed = true;
priv->old_link = phydev->link;
}
if (phydev->link) {
/* program UMAC and RGMII block based on established link
* speed, pause, and duplex.
* the speed set in umac->cmd tell RGMII block which clock
* 25MHz(100Mbps)/125MHz(1Gbps) to use for transmit.
* receive clock is provided by PHY.
*/
reg = bcmgenet_ext_readl(priv, EXT_RGMII_OOB_CTRL);
reg &= ~OOB_DISABLE;
reg |= RGMII_LINK;
bcmgenet_ext_writel(priv, reg, EXT_RGMII_OOB_CTRL);
/* check speed/duplex/pause changes */
if (priv->old_speed != phydev->speed) {
status_changed = true;
priv->old_speed = phydev->speed;
}
if (priv->old_duplex != phydev->duplex) {
status_changed = true;
priv->old_duplex = phydev->duplex;
}
if (priv->old_pause != phydev->pause) {
status_changed = true;
priv->old_pause = phydev->pause;
}
/* done if nothing has changed */
if (!status_changed)
return;
/* speed */
if (phydev->speed == SPEED_1000)
@ -110,36 +119,39 @@ static void bcmgenet_mii_setup(struct net_device *dev)
cmd_bits = UMAC_SPEED_10;
cmd_bits <<= CMD_SPEED_SHIFT;
if (priv->old_duplex != phydev->duplex) {
status_changed = 1;
priv->old_duplex = phydev->duplex;
}
/* duplex */
if (phydev->duplex != DUPLEX_FULL)
cmd_bits |= CMD_HD_EN;
if (priv->old_pause != phydev->pause) {
status_changed = 1;
priv->old_pause = phydev->pause;
}
/* pause capability */
if (!phydev->pause)
cmd_bits |= CMD_RX_PAUSE_IGNORE | CMD_TX_PAUSE_IGNORE;
}
if (!status_changed)
return;
/*
* Program UMAC and RGMII block based on established
* link speed, duplex, and pause. The speed set in
* umac->cmd tell RGMII block which clock to use for
* transmit -- 25MHz(100Mbps) or 125MHz(1Gbps).
* Receive clock is provided by the PHY.
*/
reg = bcmgenet_ext_readl(priv, EXT_RGMII_OOB_CTRL);
reg &= ~OOB_DISABLE;
reg |= RGMII_LINK;
bcmgenet_ext_writel(priv, reg, EXT_RGMII_OOB_CTRL);
if (phydev->link) {
reg = bcmgenet_umac_readl(priv, UMAC_CMD);
reg &= ~((CMD_SPEED_MASK << CMD_SPEED_SHIFT) |
CMD_HD_EN |
CMD_RX_PAUSE_IGNORE | CMD_TX_PAUSE_IGNORE);
reg |= cmd_bits;
bcmgenet_umac_writel(priv, reg, UMAC_CMD);
} else {
/* done if nothing has changed */
if (!status_changed)
return;
/* needed for MoCA fixed PHY to reflect correct link status */
netif_carrier_off(dev);
}
phy_print_status(phydev);
@ -318,6 +330,12 @@ static int bcmgenet_mii_probe(struct net_device *dev)
/* Communicate the integrated PHY revision */
phy_flags = priv->gphy_rev;
/* Initialize link state variables that bcmgenet_mii_setup() uses */
priv->old_link = -1;
priv->old_speed = -1;
priv->old_duplex = -1;
priv->old_pause = -1;
phydev = of_phy_connect(dev, priv->phy_dn, bcmgenet_mii_setup,
phy_flags, priv->phy_interface);
if (!phydev) {
@ -325,9 +343,6 @@ static int bcmgenet_mii_probe(struct net_device *dev)
return -ENODEV;
}
priv->old_link = -1;
priv->old_duplex = -1;
priv->old_pause = -1;
priv->phydev = phydev;
/* Configure port multiplexer based on what the probed PHY device since