[media] af9035: Add support for IT930x USB bridge
Add support for IT930x USB bridge and IT9303 reference design. It is a DVB-T/T2/C tuner with the following components: - IT9303 USB bridge - Si2168-B40 demodulator - Si2147-A30 tuner The IT9303 requires firmware that can be downloaded here: http://trsqr.net/olli/linux/firmwares/it930x/ The Si2168-B40 requires firmware, but the one that is used by PCTV 292e can be used. http://palosaari.fi/linux/v4l-dvb/firmware/Si2168/Si2168-B40/ The Si2147-A30 tuner does not require firmware loading. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This commit is contained in:
parent
5dcf5bf6d9
commit
5b5560842a
|
@ -144,6 +144,7 @@
|
|||
#define USB_PID_ITETECH_IT9135 0x9135
|
||||
#define USB_PID_ITETECH_IT9135_9005 0x9005
|
||||
#define USB_PID_ITETECH_IT9135_9006 0x9006
|
||||
#define USB_PID_ITETECH_IT9303 0x9306
|
||||
#define USB_PID_KWORLD_399U 0xe399
|
||||
#define USB_PID_KWORLD_399U_2 0xe400
|
||||
#define USB_PID_KWORLD_395U 0xe396
|
||||
|
|
|
@ -290,7 +290,7 @@ static int af9035_i2c_master_xfer(struct i2c_adapter *adap,
|
|||
return -EAGAIN;
|
||||
|
||||
/*
|
||||
* I2C sub header is 5 bytes long. Meaning of those bytes are:
|
||||
* AF9035 I2C sub header is 5 bytes long. Meaning of those bytes are:
|
||||
* 0: data len
|
||||
* 1: I2C addr << 1
|
||||
* 2: reg addr len
|
||||
|
@ -317,6 +317,12 @@ static int af9035_i2c_master_xfer(struct i2c_adapter *adap,
|
|||
* bus. I2C subsystem does not allow register multiple devices to same
|
||||
* bus, having same slave address. Due to that we reuse demod address,
|
||||
* shifted by one bit, on that case.
|
||||
*
|
||||
* For IT930x we use a different command and the sub header is
|
||||
* different as well:
|
||||
* 0: data len
|
||||
* 1: I2C bus (0x03 seems to be only value used)
|
||||
* 2: I2C addr << 1
|
||||
*/
|
||||
#define AF9035_IS_I2C_XFER_WRITE_READ(_msg, _num) \
|
||||
(_num == 2 && !(_msg[0].flags & I2C_M_RD) && (_msg[1].flags & I2C_M_RD))
|
||||
|
@ -348,13 +354,24 @@ static int af9035_i2c_master_xfer(struct i2c_adapter *adap,
|
|||
struct usb_req req = { CMD_I2C_RD, 0, 5 + msg[0].len,
|
||||
buf, msg[1].len, msg[1].buf };
|
||||
|
||||
if (state->chip_type == 0x9306) {
|
||||
req.cmd = CMD_GENERIC_I2C_RD;
|
||||
req.wlen = 3 + msg[0].len;
|
||||
}
|
||||
req.mbox |= ((msg[0].addr & 0x80) >> 3);
|
||||
|
||||
buf[0] = msg[1].len;
|
||||
if (state->chip_type == 0x9306) {
|
||||
buf[1] = 0x03; /* I2C bus */
|
||||
buf[2] = msg[0].addr << 1;
|
||||
memcpy(&buf[3], msg[0].buf, msg[0].len);
|
||||
} else {
|
||||
buf[1] = msg[0].addr << 1;
|
||||
buf[2] = 0x00; /* reg addr len */
|
||||
buf[3] = 0x00; /* reg addr MSB */
|
||||
buf[4] = 0x00; /* reg addr LSB */
|
||||
memcpy(&buf[5], msg[0].buf, msg[0].len);
|
||||
}
|
||||
ret = af9035_ctrl_msg(d, &req);
|
||||
}
|
||||
} else if (AF9035_IS_I2C_XFER_WRITE(msg, num)) {
|
||||
|
@ -380,13 +397,24 @@ static int af9035_i2c_master_xfer(struct i2c_adapter *adap,
|
|||
struct usb_req req = { CMD_I2C_WR, 0, 5 + msg[0].len,
|
||||
buf, 0, NULL };
|
||||
|
||||
if (state->chip_type == 0x9306) {
|
||||
req.cmd = CMD_GENERIC_I2C_WR;
|
||||
req.wlen = 3 + msg[0].len;
|
||||
}
|
||||
|
||||
req.mbox |= ((msg[0].addr & 0x80) >> 3);
|
||||
buf[0] = msg[0].len;
|
||||
if (state->chip_type == 0x9306) {
|
||||
buf[1] = 0x03; /* I2C bus */
|
||||
buf[2] = msg[0].addr << 1;
|
||||
memcpy(&buf[3], msg[0].buf, msg[0].len);
|
||||
} else {
|
||||
buf[1] = msg[0].addr << 1;
|
||||
buf[2] = 0x00; /* reg addr len */
|
||||
buf[3] = 0x00; /* reg addr MSB */
|
||||
buf[4] = 0x00; /* reg addr LSB */
|
||||
memcpy(&buf[5], msg[0].buf, msg[0].len);
|
||||
}
|
||||
ret = af9035_ctrl_msg(d, &req);
|
||||
}
|
||||
} else if (AF9035_IS_I2C_XFER_READ(msg, num)) {
|
||||
|
@ -398,12 +426,22 @@ static int af9035_i2c_master_xfer(struct i2c_adapter *adap,
|
|||
u8 buf[5];
|
||||
struct usb_req req = { CMD_I2C_RD, 0, sizeof(buf),
|
||||
buf, msg[0].len, msg[0].buf };
|
||||
|
||||
if (state->chip_type == 0x9306) {
|
||||
req.cmd = CMD_GENERIC_I2C_RD;
|
||||
req.wlen = 3;
|
||||
}
|
||||
req.mbox |= ((msg[0].addr & 0x80) >> 3);
|
||||
buf[0] = msg[0].len;
|
||||
if (state->chip_type == 0x9306) {
|
||||
buf[1] = 0x03; /* I2C bus */
|
||||
buf[2] = msg[0].addr << 1;
|
||||
} else {
|
||||
buf[1] = msg[0].addr << 1;
|
||||
buf[2] = 0x00; /* reg addr len */
|
||||
buf[3] = 0x00; /* reg addr MSB */
|
||||
buf[4] = 0x00; /* reg addr LSB */
|
||||
}
|
||||
ret = af9035_ctrl_msg(d, &req);
|
||||
}
|
||||
} else {
|
||||
|
@ -465,6 +503,9 @@ static int af9035_identify_state(struct dvb_usb_device *d, const char **name)
|
|||
else
|
||||
*name = AF9035_FIRMWARE_IT9135_V1;
|
||||
state->eeprom_addr = EEPROM_BASE_IT9135;
|
||||
} else if (state->chip_type == 0x9306) {
|
||||
*name = AF9035_FIRMWARE_IT9303;
|
||||
state->eeprom_addr = EEPROM_BASE_IT9135;
|
||||
} else {
|
||||
*name = AF9035_FIRMWARE_AF9035;
|
||||
state->eeprom_addr = EEPROM_BASE_AF9035;
|
||||
|
@ -674,7 +715,8 @@ static int af9035_download_firmware(struct dvb_usb_device *d,
|
|||
if (!tmp)
|
||||
tmp = 0x3a;
|
||||
|
||||
if (state->chip_type == 0x9135) {
|
||||
if ((state->chip_type == 0x9135) ||
|
||||
(state->chip_type == 0x9306)) {
|
||||
ret = af9035_wr_reg(d, 0x004bfb, tmp);
|
||||
if (ret < 0)
|
||||
goto err;
|
||||
|
@ -766,8 +808,16 @@ static int af9035_read_config(struct dvb_usb_device *d)
|
|||
dev_dbg(&d->udev->dev, "%s: no eeprom\n", __func__);
|
||||
goto skip_eeprom;
|
||||
}
|
||||
} else if (state->chip_type == 0x9306) {
|
||||
/*
|
||||
* IT930x is an USB bridge, only single demod-single tuner
|
||||
* configurations seen so far.
|
||||
*/
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
|
||||
/* check if there is dual tuners */
|
||||
ret = af9035_rd_reg(d, state->eeprom_addr + EEPROM_TS_MODE, &tmp);
|
||||
if (ret < 0)
|
||||
|
@ -1111,6 +1161,41 @@ err:
|
|||
return ret;
|
||||
}
|
||||
|
||||
static int it930x_frontend_attach(struct dvb_usb_adapter *adap)
|
||||
{
|
||||
struct state *state = adap_to_priv(adap);
|
||||
struct dvb_usb_device *d = adap_to_d(adap);
|
||||
int ret;
|
||||
struct si2168_config si2168_config;
|
||||
struct i2c_adapter *adapter;
|
||||
|
||||
dev_dbg(&d->udev->dev, "adap->id=%d\n", adap->id);
|
||||
|
||||
si2168_config.i2c_adapter = &adapter;
|
||||
si2168_config.fe = &adap->fe[0];
|
||||
si2168_config.ts_mode = SI2168_TS_SERIAL;
|
||||
|
||||
state->af9033_config[adap->id].fe = &adap->fe[0];
|
||||
state->af9033_config[adap->id].ops = &state->ops;
|
||||
ret = af9035_add_i2c_dev(d, "si2168", 0x67, &si2168_config,
|
||||
&d->i2c_adap);
|
||||
if (ret)
|
||||
goto err;
|
||||
|
||||
if (adap->fe[0] == NULL) {
|
||||
ret = -ENODEV;
|
||||
goto err;
|
||||
}
|
||||
state->i2c_adapter_demod = adapter;
|
||||
|
||||
return 0;
|
||||
|
||||
err:
|
||||
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int af9035_frontend_detach(struct dvb_usb_adapter *adap)
|
||||
{
|
||||
struct state *state = adap_to_priv(adap);
|
||||
|
@ -1430,6 +1515,93 @@ err:
|
|||
return ret;
|
||||
}
|
||||
|
||||
static int it930x_tuner_attach(struct dvb_usb_adapter *adap)
|
||||
{
|
||||
struct state *state = adap_to_priv(adap);
|
||||
struct dvb_usb_device *d = adap_to_d(adap);
|
||||
int ret;
|
||||
struct si2157_config si2157_config;
|
||||
|
||||
dev_dbg(&d->udev->dev, "%s: adap->id=%d\n", __func__, adap->id);
|
||||
|
||||
/* I2C master bus 2 clock speed 300k */
|
||||
ret = af9035_wr_reg(d, 0x00f6a7, 0x07);
|
||||
if (ret < 0)
|
||||
goto err;
|
||||
|
||||
/* I2C master bus 1,3 clock speed 300k */
|
||||
ret = af9035_wr_reg(d, 0x00f103, 0x07);
|
||||
if (ret < 0)
|
||||
goto err;
|
||||
|
||||
/* set gpio11 low */
|
||||
ret = af9035_wr_reg_mask(d, 0xd8d4, 0x01, 0x01);
|
||||
if (ret < 0)
|
||||
goto err;
|
||||
|
||||
ret = af9035_wr_reg_mask(d, 0xd8d5, 0x01, 0x01);
|
||||
if (ret < 0)
|
||||
goto err;
|
||||
|
||||
ret = af9035_wr_reg_mask(d, 0xd8d3, 0x01, 0x01);
|
||||
if (ret < 0)
|
||||
goto err;
|
||||
|
||||
/* Tuner enable using gpiot2_en, gpiot2_on and gpiot2_o (reset) */
|
||||
ret = af9035_wr_reg_mask(d, 0xd8b8, 0x01, 0x01);
|
||||
if (ret < 0)
|
||||
goto err;
|
||||
|
||||
ret = af9035_wr_reg_mask(d, 0xd8b9, 0x01, 0x01);
|
||||
if (ret < 0)
|
||||
goto err;
|
||||
|
||||
ret = af9035_wr_reg_mask(d, 0xd8b7, 0x00, 0x01);
|
||||
if (ret < 0)
|
||||
goto err;
|
||||
|
||||
msleep(200);
|
||||
|
||||
ret = af9035_wr_reg_mask(d, 0xd8b7, 0x01, 0x01);
|
||||
if (ret < 0)
|
||||
goto err;
|
||||
|
||||
memset(&si2157_config, 0, sizeof(si2157_config));
|
||||
si2157_config.fe = adap->fe[0];
|
||||
ret = af9035_add_i2c_dev(d, "si2157", 0x63,
|
||||
&si2157_config, state->i2c_adapter_demod);
|
||||
|
||||
if (ret)
|
||||
goto err;
|
||||
|
||||
return 0;
|
||||
|
||||
err:
|
||||
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
|
||||
static int it930x_tuner_detach(struct dvb_usb_adapter *adap)
|
||||
{
|
||||
struct state *state = adap_to_priv(adap);
|
||||
struct dvb_usb_device *d = adap_to_d(adap);
|
||||
|
||||
dev_dbg(&d->udev->dev, "adap->id=%d\n", adap->id);
|
||||
|
||||
if (adap->id == 1) {
|
||||
if (state->i2c_client[3])
|
||||
af9035_del_i2c_dev(d);
|
||||
} else if (adap->id == 0) {
|
||||
if (state->i2c_client[1])
|
||||
af9035_del_i2c_dev(d);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
static int af9035_tuner_detach(struct dvb_usb_adapter *adap)
|
||||
{
|
||||
struct state *state = adap_to_priv(adap);
|
||||
|
@ -1503,6 +1675,89 @@ err:
|
|||
return ret;
|
||||
}
|
||||
|
||||
static int it930x_init(struct dvb_usb_device *d)
|
||||
{
|
||||
struct state *state = d_to_priv(d);
|
||||
int ret, i;
|
||||
u16 frame_size = (d->udev->speed == USB_SPEED_FULL ? 5 : 816) * 188 / 4;
|
||||
u8 packet_size = (d->udev->speed == USB_SPEED_FULL ? 64 : 512) / 4;
|
||||
struct reg_val_mask tab[] = {
|
||||
{ 0x00da1a, 0x00, 0x01 }, /* ignore_sync_byte */
|
||||
{ 0x00f41f, 0x04, 0x04 }, /* dvbt_inten */
|
||||
{ 0x00da10, 0x00, 0x01 }, /* mpeg_full_speed */
|
||||
{ 0x00f41a, 0x01, 0x01 }, /* dvbt_en */
|
||||
{ 0x00da1d, 0x01, 0x01 }, /* mp2_sw_rst, reset EP4 */
|
||||
{ 0x00dd11, 0x00, 0x20 }, /* ep4_tx_en, disable EP4 */
|
||||
{ 0x00dd13, 0x00, 0x20 }, /* ep4_tx_nak, disable EP4 NAK */
|
||||
{ 0x00dd11, 0x20, 0x20 }, /* ep4_tx_en, enable EP4 */
|
||||
{ 0x00dd11, 0x00, 0x40 }, /* ep5_tx_en, disable EP5 */
|
||||
{ 0x00dd13, 0x00, 0x40 }, /* ep5_tx_nak, disable EP5 NAK */
|
||||
{ 0x00dd11, state->dual_mode << 6, 0x40 }, /* enable EP5 */
|
||||
{ 0x00dd88, (frame_size >> 0) & 0xff, 0xff},
|
||||
{ 0x00dd89, (frame_size >> 8) & 0xff, 0xff},
|
||||
{ 0x00dd0c, packet_size, 0xff},
|
||||
{ 0x00dd8a, (frame_size >> 0) & 0xff, 0xff},
|
||||
{ 0x00dd8b, (frame_size >> 8) & 0xff, 0xff},
|
||||
{ 0x00dd0d, packet_size, 0xff },
|
||||
{ 0x00da1d, 0x00, 0x01 }, /* mp2_sw_rst, disable */
|
||||
{ 0x00d833, 0x01, 0xff }, /* slew rate ctrl: slew rate boosts */
|
||||
{ 0x00d830, 0x00, 0xff }, /* Bit 0 of output driving control */
|
||||
{ 0x00d831, 0x01, 0xff }, /* Bit 1 of output driving control */
|
||||
{ 0x00d832, 0x00, 0xff }, /* Bit 2 of output driving control */
|
||||
|
||||
/* suspend gpio1 for TS-C */
|
||||
{ 0x00d8b0, 0x01, 0xff }, /* gpio1 */
|
||||
{ 0x00d8b1, 0x01, 0xff }, /* gpio1 */
|
||||
{ 0x00d8af, 0x00, 0xff }, /* gpio1 */
|
||||
|
||||
/* suspend gpio7 for TS-D */
|
||||
{ 0x00d8c4, 0x01, 0xff }, /* gpio7 */
|
||||
{ 0x00d8c5, 0x01, 0xff }, /* gpio7 */
|
||||
{ 0x00d8c3, 0x00, 0xff }, /* gpio7 */
|
||||
|
||||
/* suspend gpio13 for TS-B */
|
||||
{ 0x00d8dc, 0x01, 0xff }, /* gpio13 */
|
||||
{ 0x00d8dd, 0x01, 0xff }, /* gpio13 */
|
||||
{ 0x00d8db, 0x00, 0xff }, /* gpio13 */
|
||||
|
||||
/* suspend gpio14 for TS-E */
|
||||
{ 0x00d8e4, 0x01, 0xff }, /* gpio14 */
|
||||
{ 0x00d8e5, 0x01, 0xff }, /* gpio14 */
|
||||
{ 0x00d8e3, 0x00, 0xff }, /* gpio14 */
|
||||
|
||||
/* suspend gpio15 for TS-A */
|
||||
{ 0x00d8e8, 0x01, 0xff }, /* gpio15 */
|
||||
{ 0x00d8e9, 0x01, 0xff }, /* gpio15 */
|
||||
{ 0x00d8e7, 0x00, 0xff }, /* gpio15 */
|
||||
|
||||
{ 0x00da58, 0x00, 0x01 }, /* ts_in_src, serial */
|
||||
{ 0x00da73, 0x01, 0xff }, /* ts0_aggre_mode */
|
||||
{ 0x00da78, 0x47, 0xff }, /* ts0_sync_byte */
|
||||
{ 0x00da4c, 0x01, 0xff }, /* ts0_en */
|
||||
{ 0x00da5a, 0x1f, 0xff }, /* ts_fail_ignore */
|
||||
};
|
||||
|
||||
dev_dbg(&d->udev->dev,
|
||||
"%s: USB speed=%d frame_size=%04x packet_size=%02x\n",
|
||||
__func__, d->udev->speed, frame_size, packet_size);
|
||||
|
||||
/* init endpoints */
|
||||
for (i = 0; i < ARRAY_SIZE(tab); i++) {
|
||||
ret = af9035_wr_reg_mask(d, tab[i].reg,
|
||||
tab[i].val, tab[i].mask);
|
||||
|
||||
if (ret < 0)
|
||||
goto err;
|
||||
}
|
||||
|
||||
return 0;
|
||||
err:
|
||||
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
|
||||
#if IS_ENABLED(CONFIG_RC_CORE)
|
||||
static int af9035_rc_query(struct dvb_usb_device *d)
|
||||
{
|
||||
|
@ -1706,6 +1961,37 @@ static const struct dvb_usb_device_properties af9035_props = {
|
|||
},
|
||||
};
|
||||
|
||||
static const struct dvb_usb_device_properties it930x_props = {
|
||||
.driver_name = KBUILD_MODNAME,
|
||||
.owner = THIS_MODULE,
|
||||
.adapter_nr = adapter_nr,
|
||||
.size_of_priv = sizeof(struct state),
|
||||
|
||||
.generic_bulk_ctrl_endpoint = 0x02,
|
||||
.generic_bulk_ctrl_endpoint_response = 0x81,
|
||||
|
||||
.identify_state = af9035_identify_state,
|
||||
.download_firmware = af9035_download_firmware,
|
||||
|
||||
.i2c_algo = &af9035_i2c_algo,
|
||||
.read_config = af9035_read_config,
|
||||
.frontend_attach = it930x_frontend_attach,
|
||||
.frontend_detach = af9035_frontend_detach,
|
||||
.tuner_attach = it930x_tuner_attach,
|
||||
.tuner_detach = it930x_tuner_detach,
|
||||
.init = it930x_init,
|
||||
.get_stream_config = af9035_get_stream_config,
|
||||
|
||||
.get_adapter_count = af9035_get_adapter_count,
|
||||
.adapter = {
|
||||
{
|
||||
.stream = DVB_USB_STREAM_BULK(0x84, 4, 816 * 188),
|
||||
}, {
|
||||
.stream = DVB_USB_STREAM_BULK(0x85, 4, 816 * 188),
|
||||
},
|
||||
},
|
||||
};
|
||||
|
||||
static const struct usb_device_id af9035_id_table[] = {
|
||||
/* AF9035 devices */
|
||||
{ DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_9035,
|
||||
|
@ -1759,6 +2045,9 @@ static const struct usb_device_id af9035_id_table[] = {
|
|||
{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_CTVDIGDUAL_V2,
|
||||
&af9035_props, "Digital Dual TV Receiver CTVDIGDUAL_V2",
|
||||
RC_MAP_IT913X_V1) },
|
||||
/* IT930x devices */
|
||||
{ DVB_USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9303,
|
||||
&it930x_props, "ITE 9303 Generic", NULL) },
|
||||
/* XXX: that same ID [0ccd:0099] is used by af9015 driver too */
|
||||
{ DVB_USB_DEVICE(USB_VID_TERRATEC, 0x0099,
|
||||
&af9035_props, "TerraTec Cinergy T Stick Dual RC (rev. 2)",
|
||||
|
@ -1795,3 +2084,4 @@ MODULE_LICENSE("GPL");
|
|||
MODULE_FIRMWARE(AF9035_FIRMWARE_AF9035);
|
||||
MODULE_FIRMWARE(AF9035_FIRMWARE_IT9135_V1);
|
||||
MODULE_FIRMWARE(AF9035_FIRMWARE_IT9135_V2);
|
||||
MODULE_FIRMWARE(AF9035_FIRMWARE_IT9303);
|
||||
|
|
|
@ -31,6 +31,8 @@
|
|||
#include "tda18218.h"
|
||||
#include "fc2580.h"
|
||||
#include "it913x.h"
|
||||
#include "si2168.h"
|
||||
#include "si2157.h"
|
||||
|
||||
struct reg_val {
|
||||
u32 reg;
|
||||
|
@ -66,6 +68,7 @@ struct state {
|
|||
struct af9033_ops ops;
|
||||
#define AF9035_I2C_CLIENT_MAX 4
|
||||
struct i2c_client *i2c_client[AF9035_I2C_CLIENT_MAX];
|
||||
struct i2c_adapter *i2c_adapter_demod;
|
||||
};
|
||||
|
||||
static const u32 clock_lut_af9035[] = {
|
||||
|
@ -99,6 +102,7 @@ static const u32 clock_lut_it9135[] = {
|
|||
#define AF9035_FIRMWARE_AF9035 "dvb-usb-af9035-02.fw"
|
||||
#define AF9035_FIRMWARE_IT9135_V1 "dvb-usb-it9135-01.fw"
|
||||
#define AF9035_FIRMWARE_IT9135_V2 "dvb-usb-it9135-02.fw"
|
||||
#define AF9035_FIRMWARE_IT9303 "dvb-usb-it9303-01.fw"
|
||||
|
||||
/*
|
||||
* eeprom is memory mapped as read only. Writing that memory mapped address
|
||||
|
@ -140,5 +144,7 @@ static const u32 clock_lut_it9135[] = {
|
|||
#define CMD_FW_DL_BEGIN 0x24
|
||||
#define CMD_FW_DL_END 0x25
|
||||
#define CMD_FW_SCATTER_WR 0x29
|
||||
#define CMD_GENERIC_I2C_RD 0x2a
|
||||
#define CMD_GENERIC_I2C_WR 0x2b
|
||||
|
||||
#endif
|
||||
|
|
Loading…
Reference in New Issue