ASoC: Ux500: Move MSP pinctrl setup into the MSP driver

In the initial submission of the MSP driver msp1 and msp3's associated
pinctrl mechanism was passed back to platform code using a plat_init()
call-back routine, but it has no place in platform code. The MSP driver
should set this up for the appropriate ports. Instead we use a use_pinctrl
identifier which is passed from platform_data/Device Tree which indicates
which ports should use pinctrl.

Acked-by: Ola Lilja <ola.o.lilja@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This commit is contained in:
Lee Jones 2012-09-14 16:16:08 +01:00
parent 5698bd757d
commit 5ca032ee21
4 changed files with 58 additions and 98 deletions

View File

@ -7,7 +7,6 @@
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/pinctrl/consumer.h>
#include <plat/gpio-nomadik.h>
#include <plat/pincfg.h>
@ -23,53 +22,6 @@
#include "devices-db8500.h"
#include "pins-db8500.h"
/* MSP1/3 Tx/Rx usage protection */
static DEFINE_SPINLOCK(msp_rxtx_lock);
/* Reference Count */
static int msp_rxtx_ref;
/* Pin modes */
struct pinctrl *msp1_p;
struct pinctrl_state *msp1_def;
struct pinctrl_state *msp1_sleep;
int msp13_i2s_init(void)
{
int retval = 0;
unsigned long flags;
spin_lock_irqsave(&msp_rxtx_lock, flags);
if (msp_rxtx_ref == 0 && !(IS_ERR(msp1_p) || IS_ERR(msp1_def))) {
retval = pinctrl_select_state(msp1_p, msp1_def);
if (retval)
pr_err("could not set MSP1 defstate\n");
}
if (!retval)
msp_rxtx_ref++;
spin_unlock_irqrestore(&msp_rxtx_lock, flags);
return retval;
}
int msp13_i2s_exit(void)
{
int retval = 0;
unsigned long flags;
spin_lock_irqsave(&msp_rxtx_lock, flags);
WARN_ON(!msp_rxtx_ref);
msp_rxtx_ref--;
if (msp_rxtx_ref == 0 && !(IS_ERR(msp1_p) || IS_ERR(msp1_sleep))) {
retval = pinctrl_select_state(msp1_p, msp1_sleep);
if (retval)
pr_err("could not set MSP1 sleepstate\n");
}
spin_unlock_irqrestore(&msp_rxtx_lock, flags);
return retval;
}
static struct stedma40_chan_cfg msp0_dma_rx = {
.high_priority = true,
.dir = STEDMA40_PERIPH_TO_MEM,
@ -132,8 +84,6 @@ static struct msp_i2s_platform_data msp1_platform_data = {
.id = MSP_I2S_1,
.msp_i2s_dma_rx = NULL,
.msp_i2s_dma_tx = &msp1_dma_tx,
.msp_i2s_init = msp13_i2s_init,
.msp_i2s_exit = msp13_i2s_exit,
};
static struct stedma40_chan_cfg msp2_dma_rx = {
@ -219,49 +169,22 @@ static struct msp_i2s_platform_data msp3_platform_data = {
.id = MSP_I2S_3,
.msp_i2s_dma_rx = &msp1_dma_rx,
.msp_i2s_dma_tx = NULL,
.msp_i2s_init = msp13_i2s_init,
.msp_i2s_exit = msp13_i2s_exit,
};
int mop500_msp_init(struct device *parent)
{
struct platform_device *msp1;
pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__);
platform_device_register(&snd_soc_mop500);
pr_info("Initialize MSP I2S-devices.\n");
db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0,
&msp0_platform_data);
msp1 = db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1,
db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1,
&msp1_platform_data);
db8500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2,
&msp2_platform_data);
db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1,
&msp3_platform_data);
/* Get the pinctrl handle for MSP1 */
if (msp1) {
msp1_p = pinctrl_get(&msp1->dev);
if (IS_ERR(msp1_p))
dev_err(&msp1->dev, "could not get MSP1 pinctrl\n");
else {
msp1_def = pinctrl_lookup_state(msp1_p,
PINCTRL_STATE_DEFAULT);
if (IS_ERR(msp1_def)) {
dev_err(&msp1->dev,
"could not get MSP1 defstate\n");
}
msp1_sleep = pinctrl_lookup_state(msp1_p,
PINCTRL_STATE_SLEEP);
if (IS_ERR(msp1_sleep))
dev_err(&msp1->dev,
"could not get MSP1 idlestate\n");
}
}
pr_info("%s: Register platform-device 'ux500-pcm'\n", __func__);
platform_device_register(&ux500_pcm);
return 0;
}

View File

@ -22,8 +22,6 @@ struct msp_i2s_platform_data {
enum msp_i2s_id id;
struct stedma40_chan_cfg *msp_i2s_dma_rx;
struct stedma40_chan_cfg *msp_i2s_dma_tx;
int (*msp_i2s_init) (void);
int (*msp_i2s_exit) (void);
};
#endif

View File

@ -15,6 +15,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pinctrl/consumer.h>
#include <linux/delay.h>
#include <linux/slab.h>
@ -25,6 +26,9 @@
#include "ux500_msp_i2s.h"
/* MSP1/3 Tx/Rx usage protection */
static DEFINE_SPINLOCK(msp_rxtx_lock);
/* Protocol desciptors */
static const struct msp_protdesc prot_descs[] = {
{ /* I2S */
@ -352,17 +356,23 @@ static int configure_multichannel(struct ux500_msp *msp,
static int enable_msp(struct ux500_msp *msp, struct ux500_msp_config *config)
{
int status = 0;
int status = 0, retval = 0;
u32 reg_val_DMACR, reg_val_GCR;
unsigned long flags;
/* Check msp state whether in RUN or CONFIGURED Mode */
if ((msp->msp_state == MSP_STATE_IDLE) && (msp->plat_init)) {
status = msp->plat_init();
if (status) {
dev_err(msp->dev, "%s: ERROR: Failed to init MSP (%d)!\n",
__func__, status);
return status;
if (msp->msp_state == MSP_STATE_IDLE) {
spin_lock_irqsave(&msp_rxtx_lock, flags);
if (msp->pinctrl_rxtx_ref == 0 &&
!(IS_ERR(msp->pinctrl_p) || IS_ERR(msp->pinctrl_def))) {
retval = pinctrl_select_state(msp->pinctrl_p,
msp->pinctrl_def);
if (retval)
pr_err("could not set MSP defstate\n");
}
if (!retval)
msp->pinctrl_rxtx_ref++;
spin_unlock_irqrestore(&msp_rxtx_lock, flags);
}
/* Configure msp with protocol dependent settings */
@ -620,7 +630,8 @@ int ux500_msp_i2s_trigger(struct ux500_msp *msp, int cmd, int direction)
int ux500_msp_i2s_close(struct ux500_msp *msp, unsigned int dir)
{
int status = 0;
int status = 0, retval = 0;
unsigned long flags;
dev_dbg(msp->dev, "%s: Enter (dir = 0x%01x).\n", __func__, dir);
@ -631,12 +642,19 @@ int ux500_msp_i2s_close(struct ux500_msp *msp, unsigned int dir)
writel((readl(msp->registers + MSP_GCR) &
(~(FRAME_GEN_ENABLE | SRG_ENABLE))),
msp->registers + MSP_GCR);
if (msp->plat_exit)
status = msp->plat_exit();
if (status)
dev_warn(msp->dev,
"%s: WARN: ux500_msp_i2s_exit failed (%d)!\n",
__func__, status);
spin_lock_irqsave(&msp_rxtx_lock, flags);
WARN_ON(!msp->pinctrl_rxtx_ref);
msp->pinctrl_rxtx_ref--;
if (msp->pinctrl_rxtx_ref == 0 &&
!(IS_ERR(msp->pinctrl_p) || IS_ERR(msp->pinctrl_sleep))) {
retval = pinctrl_select_state(msp->pinctrl_p,
msp->pinctrl_sleep);
if (retval)
pr_err("could not set MSP sleepstate\n");
}
spin_unlock_irqrestore(&msp_rxtx_lock, flags);
writel(0, msp->registers + MSP_GCR);
writel(0, msp->registers + MSP_TCF);
writel(0, msp->registers + MSP_RCF);
@ -675,8 +693,6 @@ int ux500_msp_i2s_init_msp(struct platform_device *pdev,
msp->id = platform_data->id;
msp->dev = &pdev->dev;
msp->plat_init = platform_data->msp_i2s_init;
msp->plat_exit = platform_data->msp_i2s_exit;
msp->dma_cfg_rx = platform_data->msp_i2s_dma_rx;
msp->dma_cfg_tx = platform_data->msp_i2s_dma_tx;
@ -713,6 +729,25 @@ int ux500_msp_i2s_init_msp(struct platform_device *pdev,
dev_dbg(&pdev->dev, "I2S device-name: '%s'\n", i2s_cont->name);
msp->i2s_cont = i2s_cont;
msp->pinctrl_p = pinctrl_get(msp->dev);
if (IS_ERR(msp->pinctrl_p))
dev_err(&pdev->dev, "could not get MSP pinctrl\n");
else {
msp->pinctrl_def = pinctrl_lookup_state(msp->pinctrl_p,
PINCTRL_STATE_DEFAULT);
if (IS_ERR(msp->pinctrl_def)) {
dev_err(&pdev->dev,
"could not get MSP defstate (%li)\n",
PTR_ERR(msp->pinctrl_def));
}
msp->pinctrl_sleep = pinctrl_lookup_state(msp->pinctrl_p,
PINCTRL_STATE_SLEEP);
if (IS_ERR(msp->pinctrl_sleep))
dev_err(&pdev->dev,
"could not get MSP idlestate (%li)\n",
PTR_ERR(msp->pinctrl_def));
}
return 0;
}

View File

@ -524,14 +524,18 @@ struct ux500_msp {
struct dma_chan *rx_pipeid;
enum msp_state msp_state;
int (*transfer) (struct ux500_msp *msp, struct i2s_message *message);
int (*plat_init) (void);
int (*plat_exit) (void);
struct timer_list notify_timer;
int def_elem_len;
unsigned int dir_busy;
int loopback_enable;
u32 backup_regs[MAX_MSP_BACKUP_REGS];
unsigned int f_bitclk;
/* Pin modes */
struct pinctrl *pinctrl_p;
struct pinctrl_state *pinctrl_def;
struct pinctrl_state *pinctrl_sleep;
/* Reference Count */
int pinctrl_rxtx_ref;
};
struct ux500_msp_dma_params {