ASoC: sgtl5000: Allow SCLK pad drive strength to be changed

This patch introduces "sclk-strength" property to allow SCLK pad drive
strength to be changed via device tree.

When running playback test on LS1028ARDB, Tx Frame sync error interrupt
will occur sometimes. Some noises also exist. After changing SCLK pad
drive strength to the maximum value, the issues are gone.

Signed-off-by: Alison Wang <alison.wang@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Alison Wang 2018-12-26 08:59:53 +08:00 committed by Mark Brown
parent 47caf048a0
commit 5dc4ca2996
No known key found for this signature in database
GPG Key ID: 24D68B725D5487D0
2 changed files with 27 additions and 1 deletions

View File

@ -37,6 +37,15 @@ VDDIO 1.8V 2.5V 3.3V
2 = 3.33 mA 5.74 mA 8.03 mA
3 = 4.99 mA 8.61 mA 12.05 mA
- sclk-strength: the SCLK pad strength. Possible values are:
0, 1, 2 and 3 as per the table below:
VDDIO 1.8V 2.5V 3.3V
0 = Disable
1 = 1.66 mA 2.87 mA 4.02 mA
2 = 3.33 mA 5.74 mA 8.03 mA
3 = 4.99 mA 8.61 mA 12.05 mA
Example:
sgtl5000: codec@a {

View File

@ -116,6 +116,13 @@ enum {
I2S_LRCLK_STRENGTH_HIGH,
};
enum {
I2S_SCLK_STRENGTH_DISABLE,
I2S_SCLK_STRENGTH_LOW,
I2S_SCLK_STRENGTH_MEDIUM,
I2S_SCLK_STRENGTH_HIGH,
};
/* sgtl5000 private structure in codec */
struct sgtl5000_priv {
int sysclk; /* sysclk rate */
@ -129,6 +136,7 @@ struct sgtl5000_priv {
u8 micbias_resistor;
u8 micbias_voltage;
u8 lrclk_strength;
u8 sclk_strength;
};
/*
@ -1302,7 +1310,9 @@ static int sgtl5000_probe(struct snd_soc_component *component)
SGTL5000_DAC_MUTE_RIGHT |
SGTL5000_DAC_MUTE_LEFT);
reg = ((sgtl5000->lrclk_strength) << SGTL5000_PAD_I2S_LRCLK_SHIFT | 0x5f);
reg = ((sgtl5000->lrclk_strength) << SGTL5000_PAD_I2S_LRCLK_SHIFT |
(sgtl5000->sclk_strength) << SGTL5000_PAD_I2S_SCLK_SHIFT |
0x1f);
snd_soc_component_write(component, SGTL5000_CHIP_PAD_STRENGTH, reg);
snd_soc_component_write(component, SGTL5000_CHIP_ANA_CTRL,
@ -1542,6 +1552,13 @@ static int sgtl5000_i2c_probe(struct i2c_client *client,
sgtl5000->lrclk_strength = value;
}
sgtl5000->sclk_strength = I2S_SCLK_STRENGTH_LOW;
if (!of_property_read_u32(np, "sclk-strength", &value)) {
if (value > I2S_SCLK_STRENGTH_HIGH)
value = I2S_SCLK_STRENGTH_LOW;
sgtl5000->sclk_strength = value;
}
/* Ensure sgtl5000 will start with sane register values */
sgtl5000_fill_defaults(client);