diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index bea6793a7ede..9f09f45835f8 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1249,12 +1249,10 @@ static struct vpif_capture_config da850_vpif_capture_config = {
 
 static struct adv7343_platform_data adv7343_pdata = {
 	.mode_config = {
-		.dac_3 = 1,
-		.dac_2 = 1,
-		.dac_1 = 1,
+		.dac = { 1, 1, 1 },
 	},
 	.sd_config = {
-		.sd_dac_out1 = 1,
+		.sd_dac_out = { 1 },
 	},
 };
 
diff --git a/drivers/media/i2c/adv7343.c b/drivers/media/i2c/adv7343.c
index 8080c2cf1029..f0238fb3e3e2 100644
--- a/drivers/media/i2c/adv7343.c
+++ b/drivers/media/i2c/adv7343.c
@@ -227,12 +227,12 @@ static int adv7343_setoutput(struct v4l2_subdev *sd, u32 output_type)
 	else
 		val = state->pdata->mode_config.sleep_mode << 0 |
 		      state->pdata->mode_config.pll_control << 1 |
-		      state->pdata->mode_config.dac_3 << 2 |
-		      state->pdata->mode_config.dac_2 << 3 |
-		      state->pdata->mode_config.dac_1 << 4 |
-		      state->pdata->mode_config.dac_6 << 5 |
-		      state->pdata->mode_config.dac_5 << 6 |
-		      state->pdata->mode_config.dac_4 << 7;
+		      state->pdata->mode_config.dac[2] << 2 |
+		      state->pdata->mode_config.dac[1] << 3 |
+		      state->pdata->mode_config.dac[0] << 4 |
+		      state->pdata->mode_config.dac[5] << 5 |
+		      state->pdata->mode_config.dac[4] << 6 |
+		      state->pdata->mode_config.dac[3] << 7;
 
 	err = adv7343_write(sd, ADV7343_POWER_MODE_REG, val);
 	if (err < 0)
@@ -251,15 +251,15 @@ static int adv7343_setoutput(struct v4l2_subdev *sd, u32 output_type)
 	/* configure SD DAC Output 2 and SD DAC Output 1 bit to zero */
 	val = state->reg82 & (SD_DAC_1_DI & SD_DAC_2_DI);
 
-	if (state->pdata && state->pdata->sd_config.sd_dac_out1)
-		val = val | (state->pdata->sd_config.sd_dac_out1 << 1);
-	else if (state->pdata && !state->pdata->sd_config.sd_dac_out1)
-		val = val & ~(state->pdata->sd_config.sd_dac_out1 << 1);
+	if (state->pdata && state->pdata->sd_config.sd_dac_out[0])
+		val = val | (state->pdata->sd_config.sd_dac_out[0] << 1);
+	else if (state->pdata && !state->pdata->sd_config.sd_dac_out[0])
+		val = val & ~(state->pdata->sd_config.sd_dac_out[0] << 1);
 
-	if (state->pdata && state->pdata->sd_config.sd_dac_out2)
-		val = val | (state->pdata->sd_config.sd_dac_out2 << 2);
-	else if (state->pdata && !state->pdata->sd_config.sd_dac_out2)
-		val = val & ~(state->pdata->sd_config.sd_dac_out2 << 2);
+	if (state->pdata && state->pdata->sd_config.sd_dac_out[1])
+		val = val | (state->pdata->sd_config.sd_dac_out[1] << 2);
+	else if (state->pdata && !state->pdata->sd_config.sd_dac_out[1])
+		val = val & ~(state->pdata->sd_config.sd_dac_out[1] << 2);
 
 	err = adv7343_write(sd, ADV7343_SD_MODE_REG2, val);
 	if (err < 0)
diff --git a/include/media/adv7343.h b/include/media/adv7343.h
index 944757be49bb..e4142b1ef8cd 100644
--- a/include/media/adv7343.h
+++ b/include/media/adv7343.h
@@ -28,12 +28,7 @@
  * @pll_control: PLL and oversampling control. This control allows internal
  *		 PLL 1 circuit to be powered down and the oversampling to be
  *		 switched off.
- * @dac_1: power on/off DAC 1.
- * @dac_2: power on/off DAC 2.
- * @dac_3: power on/off DAC 3.
- * @dac_4: power on/off DAC 4.
- * @dac_5: power on/off DAC 5.
- * @dac_6: power on/off DAC 6.
+ * @dac: array to configure power on/off DAC's 1..6
  *
  * Power mode register (Register 0x0), for more info refer REGISTER MAP ACCESS
  * section of datasheet[1], table 17 page no 30.
@@ -43,23 +38,16 @@
 struct adv7343_power_mode {
 	bool sleep_mode;
 	bool pll_control;
-	bool dac_1;
-	bool dac_2;
-	bool dac_3;
-	bool dac_4;
-	bool dac_5;
-	bool dac_6;
+	u32 dac[6];
 };
 
 /**
  * struct adv7343_sd_config - SD Only Output Configuration.
- * @sd_dac_out1: Configure SD DAC Output 1.
- * @sd_dac_out2: Configure SD DAC Output 2.
+ * @sd_dac_out: array configuring SD DAC Outputs 1 and 2
  */
 struct adv7343_sd_config {
 	/* SD only Output Configuration */
-	bool sd_dac_out1;
-	bool sd_dac_out2;
+	u32 sd_dac_out[2];
 };
 
 /**