cs5530/sc1200: add ->udma_filter methods

CS5530/SC1200 specifies that two drives on the same cable cannot mix
UDMA/MDMA.  Add {cs5530,sc1200}_udma_filter() to handle this.  This also
makes it possible to remove open-coded best DMA mode selection and use
standard ide_use_dma()/ide_max_dma_mode() helpers.  While at it bump
version numbers.

There should be no functionality changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
This commit is contained in:
Bartlomiej Zolnierkiewicz 2007-05-16 00:51:43 +02:00
parent 793a97228d
commit 5fd216bbb2
2 changed files with 88 additions and 116 deletions

View File

@ -1,10 +1,10 @@
/*
* linux/drivers/ide/pci/cs5530.c Version 0.7 Sept 10, 2002
* linux/drivers/ide/pci/cs5530.c Version 0.71 Mar 10 2007
*
* Copyright (C) 2000 Andre Hedrick <andre@linux-ide.org>
* Ditto of GNU General Public License.
*
* Copyright (C) 2000 Mark Lord <mlord@pobox.com>
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz
*
* May be copied or modified under the terms of the GNU General Public License
*
* Development of this chipset driver was funded
@ -88,79 +88,66 @@ static void cs5530_tuneproc (ide_drive_t *drive, u8 pio) /* pio=255 means "autot
}
/**
* cs5530_config_dma - select/set DMA and UDMA modes
* cs5530_udma_filter - UDMA filter
* @drive: drive
*
* cs5530_udma_filter() does UDMA mask filtering for the given drive
* taking into the consideration capabilities of the mate device.
*
* The CS5530 specifies that two drives sharing a cable cannot mix
* UDMA/MDMA. It has to be one or the other, for the pair, though
* different timings can still be chosen for each drive. We could
* set the appropriate timing bits on the fly, but that might be
* a bit confusing. So, for now we statically handle this requirement
* by looking at our mate drive to see what it is capable of, before
* choosing a mode for our own drive.
*
* Note: This relies on the fact we never fail from UDMA to MWDMA2
* but instead drop to PIO.
*/
static u8 cs5530_udma_filter(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
ide_drive_t *mate = &hwif->drives[(drive->dn & 1) ^ 1];
struct hd_driveid *mateid = mate->id;
u8 mask = hwif->ultra_mask;
if (mate->present == 0)
goto out;
if ((mateid->capability & 1) && __ide_dma_bad_drive(mate) == 0) {
if ((mateid->field_valid & 4) && (mateid->dma_ultra & 7))
goto out;
if ((mateid->field_valid & 2) && (mateid->dma_mword & 7))
mask = 0;
}
out:
return mask;
}
/**
* cs5530_config_dma - set DMA/UDMA mode
* @drive: drive to tune
*
* cs5530_config_dma() handles selection/setting of DMA/UDMA modes
* for both the chipset and drive. The CS5530 has limitations about
* mixing DMA/UDMA on the same cable.
* cs5530_config_dma() handles setting of DMA/UDMA mode
* for both the chipset and drive.
*/
static int cs5530_config_dma (ide_drive_t *drive)
static int cs5530_config_dma(ide_drive_t *drive)
{
int udma_ok = 1, mode = 0;
ide_hwif_t *hwif = HWIF(drive);
int unit = drive->select.b.unit;
ide_drive_t *mate = &hwif->drives[unit^1];
struct hd_driveid *id = drive->id;
unsigned int reg, timings = 0;
unsigned long basereg;
ide_hwif_t *hwif = drive->hwif;
unsigned int reg, timings = 0;
unsigned long basereg;
u8 unit = drive->dn & 1, mode = 0;
/*
* Default to DMA-off in case we run into trouble here.
*/
hwif->dma_off_quietly(drive);
/*
* The CS5530 specifies that two drives sharing a cable cannot
* mix UDMA/MDMA. It has to be one or the other, for the pair,
* though different timings can still be chosen for each drive.
* We could set the appropriate timing bits on the fly,
* but that might be a bit confusing. So, for now we statically
* handle this requirement by looking at our mate drive to see
* what it is capable of, before choosing a mode for our own drive.
*
* Note: This relies on the fact we never fail from UDMA to MWDMA_2
* but instead drop to PIO
*/
if (mate->present) {
struct hd_driveid *mateid = mate->id;
if (mateid && (mateid->capability & 1) &&
!__ide_dma_bad_drive(mate)) {
if ((mateid->field_valid & 4) &&
(mateid->dma_ultra & 7))
udma_ok = 1;
else if ((mateid->field_valid & 2) &&
(mateid->dma_mword & 7))
udma_ok = 0;
else
udma_ok = 1;
}
}
/*
* Now see what the current drive is capable of,
* selecting UDMA only if the mate said it was ok.
*/
if (id && (id->capability & 1) && drive->autodma &&
!__ide_dma_bad_drive(drive)) {
if (udma_ok && (id->field_valid & 4) && (id->dma_ultra & 7)) {
if (id->dma_ultra & 4)
mode = XFER_UDMA_2;
else if (id->dma_ultra & 2)
mode = XFER_UDMA_1;
else if (id->dma_ultra & 1)
mode = XFER_UDMA_0;
}
if (!mode && (id->field_valid & 2) && (id->dma_mword & 7)) {
if (id->dma_mword & 4)
mode = XFER_MW_DMA_2;
else if (id->dma_mword & 2)
mode = XFER_MW_DMA_1;
else if (id->dma_mword & 1)
mode = XFER_MW_DMA_0;
}
}
if (ide_use_dma(drive))
mode = ide_max_dma_mode(drive);
/*
* Tell the drive to switch to the new mode; abort on failure.
@ -332,6 +319,7 @@ static void __devinit init_hwif_cs5530 (ide_hwif_t *hwif)
hwif->ultra_mask = 0x07;
hwif->mwdma_mask = 0x07;
hwif->udma_filter = cs5530_udma_filter;
hwif->ide_dma_check = &cs5530_config_dma;
if (!noautodma)
hwif->autodma = 1;

View File

@ -1,7 +1,9 @@
/*
* linux/drivers/ide/pci/sc1200.c Version 0.91 28-Jan-2003
* linux/drivers/ide/pci/sc1200.c Version 0.92 Mar 10 2007
*
* Copyright (C) 2000-2002 Mark Lord <mlord@pobox.com>
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz
*
* May be copied or modified under the terms of the GNU General Public License
*
* Development of this chipset driver was funded
@ -93,57 +95,33 @@ static const unsigned int sc1200_pio_timings[4][5] =
*/
//#define SC1200_BAD_PIO(timings) (((timings)&~0x80000000)==0x00009172)
static int sc1200_autoselect_dma_mode (ide_drive_t *drive)
/*
* The SC1200 specifies that two drives sharing a cable cannot mix
* UDMA/MDMA. It has to be one or the other, for the pair, though
* different timings can still be chosen for each drive. We could
* set the appropriate timing bits on the fly, but that might be
* a bit confusing. So, for now we statically handle this requirement
* by looking at our mate drive to see what it is capable of, before
* choosing a mode for our own drive.
*/
static u8 sc1200_udma_filter(ide_drive_t *drive)
{
int udma_ok = 1, mode = 0;
ide_hwif_t *hwif = HWIF(drive);
int unit = drive->select.b.unit;
ide_drive_t *mate = &hwif->drives[unit^1];
struct hd_driveid *id = drive->id;
ide_hwif_t *hwif = drive->hwif;
ide_drive_t *mate = &hwif->drives[(drive->dn & 1) ^ 1];
struct hd_driveid *mateid = mate->id;
u8 mask = hwif->ultra_mask;
/*
* The SC1200 specifies that two drives sharing a cable cannot
* mix UDMA/MDMA. It has to be one or the other, for the pair,
* though different timings can still be chosen for each drive.
* We could set the appropriate timing bits on the fly,
* but that might be a bit confusing. So, for now we statically
* handle this requirement by looking at our mate drive to see
* what it is capable of, before choosing a mode for our own drive.
*/
if (mate->present) {
struct hd_driveid *mateid = mate->id;
if (mateid && (mateid->capability & 1) && !__ide_dma_bad_drive(mate)) {
if ((mateid->field_valid & 4) && (mateid->dma_ultra & 7))
udma_ok = 1;
else if ((mateid->field_valid & 2) && (mateid->dma_mword & 7))
udma_ok = 0;
else
udma_ok = 1;
}
if (mate->present == 0)
goto out;
if ((mateid->capability & 1) && __ide_dma_bad_drive(mate) == 0) {
if ((mateid->field_valid & 4) && (mateid->dma_ultra & 7))
goto out;
if ((mateid->field_valid & 2) && (mateid->dma_mword & 7))
mask = 0;
}
/*
* Now see what the current drive is capable of,
* selecting UDMA only if the mate said it was ok.
*/
if (id && (id->capability & 1) && hwif->autodma && !__ide_dma_bad_drive(drive)) {
if (udma_ok && (id->field_valid & 4) && (id->dma_ultra & 7)) {
if (id->dma_ultra & 4)
mode = XFER_UDMA_2;
else if (id->dma_ultra & 2)
mode = XFER_UDMA_1;
else if (id->dma_ultra & 1)
mode = XFER_UDMA_0;
}
if (!mode && (id->field_valid & 2) && (id->dma_mword & 7)) {
if (id->dma_mword & 4)
mode = XFER_MW_DMA_2;
else if (id->dma_mword & 2)
mode = XFER_MW_DMA_1;
else if (id->dma_mword & 1)
mode = XFER_MW_DMA_0;
}
}
return mode;
out:
return mask;
}
/*
@ -250,7 +228,12 @@ static int sc1200_config_dma2 (ide_drive_t *drive, int mode)
*/
static int sc1200_config_dma (ide_drive_t *drive)
{
return sc1200_config_dma2(drive, sc1200_autoselect_dma_mode(drive));
u8 mode = 0;
if (ide_use_dma(drive))
mode = ide_max_dma_mode(drive);
return sc1200_config_dma2(drive, mode);
}
@ -461,6 +444,7 @@ static void __devinit init_hwif_sc1200 (ide_hwif_t *hwif)
hwif->serialized = hwif->mate->serialized = 1;
hwif->autodma = 0;
if (hwif->dma_base) {
hwif->udma_filter = sc1200_udma_filter;
hwif->ide_dma_check = &sc1200_config_dma;
hwif->ide_dma_end = &sc1200_ide_dma_end;
if (!noautodma)