diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e246e8d372a9..0c2e1dd9adf3 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -926,6 +926,7 @@ config ARCH_U300 select COMMON_CLK select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB + select SPARSE_IRQ help Support for ST-Ericsson U300 series mobile platforms. diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig index 54d8f34fdee5..f7e12ede008c 100644 --- a/arch/arm/mach-u300/Kconfig +++ b/arch/arm/mach-u300/Kconfig @@ -1,6 +1,6 @@ if ARCH_U300 -menu "ST-Ericsson AB U300/U330/U335/U365 Platform" +menu "ST-Ericsson AB U300/U335 Platform" comment "ST-Ericsson Mobile Platform Products" @@ -10,46 +10,7 @@ config MACH_U300 select PINCTRL_U300 select PINCTRL_COH901 -comment "ST-Ericsson U300/U330/U335/U365 Feature Selections" - -choice - prompt "U300/U330/U335/U365 system type" - default MACH_U300_BS2X - ---help--- - You need to select the target system, i.e. the - U300/U330/U335/U365 board that you want to compile your kernel - for. - -config MACH_U300_BS2X - bool "S26/S26/B25/B26 Test Products" - depends on MACH_U300 - help - Select this if you're developing on the - S26/S25 test products. (Also works on - B26/B25 big boards.) - -config MACH_U300_BS330 - bool "S330/B330 Test Products" - depends on MACH_U300 - help - Select this if you're developing on the - S330/B330 test products. - -config MACH_U300_BS335 - bool "S335/B335 Test Products" - depends on MACH_U300 - help - Select this if you're developing on the - S335/B335 test products. - -config MACH_U300_BS365 - bool "S365/B365 Test Products" - depends on MACH_U300 - help - Select this if you're developing on the - S365/B365 test products. - -endchoice +comment "ST-Ericsson U300/U335 Feature Selections" config U300_DEBUG bool "Debug support for U300" diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile index 7e47d37aeb0e..5a86c58da396 100644 --- a/arch/arm/mach-u300/Makefile +++ b/arch/arm/mach-u300/Makefile @@ -7,7 +7,6 @@ obj-m := obj-n := obj- := -obj-$(CONFIG_ARCH_U300) += u300.o obj-$(CONFIG_SPI_PL022) += spi.o obj-$(CONFIG_MACH_U300_SPIDUMMY) += dummyspichip.o obj-$(CONFIG_I2C_STU300) += i2c.o diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index 03acf1883ec7..ef6f602b7e48 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -3,7 +3,7 @@ * arch/arm/mach-u300/core.c * * - * Copyright (C) 2007-2010 ST-Ericsson SA + * Copyright (C) 2007-2012 ST-Ericsson SA * License terms: GNU General Public License (GPL) version 2 * Core platform support, IRQ handling and device definitions. * Author: Linus Walleij @@ -31,23 +31,26 @@ #include #include #include +#include #include #include #include #include #include -#include +#include +#include #include #include #include -#include -#include +#include +#include "timer.h" #include "spi.h" #include "i2c.h" #include "u300-gpio.h" +#include "dma_channels.h" /* * Static I/O mappings that are needed for booting the U300 platforms. The @@ -76,7 +79,7 @@ static struct map_desc u300_io_desc[] __initdata = { }, }; -void __init u300_map_io(void) +static void __init u300_map_io(void) { iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc)); /* We enable a real big DMA buffer if need be. */ @@ -101,7 +104,6 @@ static AMBA_APB_DEVICE(uart0, "uart0", 0, U300_UART0_BASE, { IRQ_U300_UART0 }, &uart0_plat_data); /* The U335 have an additional UART1 on the APP CPU */ -#ifdef CONFIG_MACH_U300_BS335 static struct amba_pl011_data uart1_plat_data = { #ifdef CONFIG_COH901318 .dma_filter = coh901318_filter_id, @@ -113,7 +115,6 @@ static struct amba_pl011_data uart1_plat_data = { /* Fast device at 0x7000 offset */ static AMBA_APB_DEVICE(uart1, "uart1", 0, U300_UART1_BASE, { IRQ_U300_UART1 }, &uart1_plat_data); -#endif /* AHB device at 0x4000 offset */ static AMBA_APB_DEVICE(pl172, "pl172", 0, U300_EMIF_CFG_BASE, { }, NULL); @@ -152,9 +153,7 @@ static AMBA_APB_DEVICE(mmcsd, "mmci", 0, U300_MMCSD_BASE, */ static struct amba_device *amba_devs[] __initdata = { &uart0_device, -#ifdef CONFIG_MACH_U300_BS335 &uart1_device, -#endif &pl022_device, &pl172_device, &mmcsd_device, @@ -188,7 +187,6 @@ static struct resource gpio_resources[] = { .end = IRQ_U300_GPIO_PORT2, .flags = IORESOURCE_IRQ, }, -#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335) { .name = "gpio3", .start = IRQ_U300_GPIO_PORT3, @@ -201,8 +199,6 @@ static struct resource gpio_resources[] = { .end = IRQ_U300_GPIO_PORT4, .flags = IORESOURCE_IRQ, }, -#endif -#ifdef CONFIG_MACH_U300_BS335 { .name = "gpio5", .start = IRQ_U300_GPIO_PORT5, @@ -215,7 +211,6 @@ static struct resource gpio_resources[] = { .end = IRQ_U300_GPIO_PORT6, .flags = IORESOURCE_IRQ, }, -#endif /* CONFIG_MACH_U300_BS335 */ }; static struct resource keypad_resources[] = { @@ -323,7 +318,6 @@ static struct resource dma_resource[] = { } }; -#ifdef CONFIG_MACH_U300_BS335 /* points out all dma slave channels. * Syntax is [A1, B1, A2, B2, .... ,-1,-1] * Select all channels from A to B, end of list is marked with -1,-1 @@ -336,14 +330,6 @@ static int dma_slave_channels[] = { static int dma_memcpy_channels[] = { U300_DMA_GENERAL_PURPOSE_0, U300_DMA_GENERAL_PURPOSE_8, -1, -1}; -#else /* CONFIG_MACH_U300_BS335 */ - -static int dma_slave_channels[] = {U300_DMA_MSL_TX_0, U300_DMA_SPI_RX, -1, -1}; -static int dma_memcpy_channels[] = { - U300_DMA_GENERAL_PURPOSE_0, U300_DMA_GENERAL_PURPOSE_10, -1, -1}; - -#endif - /** register dma for memory access * * active 1 means dma intends to access memory @@ -1395,7 +1381,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = { .param.ctrl_lli = flags_memcpy_lli, .param.ctrl_lli_last = flags_memcpy_lli_last, }, -#ifdef CONFIG_MACH_U300_BS335 { .number = U300_DMA_UART1_TX, .name = "UART1 TX", @@ -1406,28 +1391,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = { .name = "UART1 RX", .priority_high = 0, } -#else - { - .number = U300_DMA_GENERAL_PURPOSE_9, - .name = "GENERAL 09", - .priority_high = 0, - - .param.config = flags_memcpy_config, - .param.ctrl_lli_chained = flags_memcpy_lli_chained, - .param.ctrl_lli = flags_memcpy_lli, - .param.ctrl_lli_last = flags_memcpy_lli_last, - }, - { - .number = U300_DMA_GENERAL_PURPOSE_10, - .name = "GENERAL 10", - .priority_high = 0, - - .param.config = flags_memcpy_config, - .param.ctrl_lli_chained = flags_memcpy_lli_chained, - .param.ctrl_lli = flags_memcpy_lli, - .param.ctrl_lli_last = flags_memcpy_lli_last, - } -#endif }; @@ -1480,18 +1443,7 @@ static struct platform_device pinctrl_device = { * GPIO block, with different number of ports. */ static struct u300_gpio_platform u300_gpio_plat = { -#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) - .variant = U300_GPIO_COH901335, - .ports = 3, -#endif -#ifdef CONFIG_MACH_U300_BS335 - .variant = U300_GPIO_COH901571_3_BS335, .ports = 7, -#endif -#ifdef CONFIG_MACH_U300_BS365 - .variant = U300_GPIO_COH901571_3_BS365, - .ports = 5, -#endif .gpio_base = 0, .gpio_irq_base = IRQ_U300_GPIO_BASE, .pinctrl_device = &pinctrl_device, @@ -1651,7 +1603,7 @@ static struct platform_device *platform_devs[] __initdata = { * together so some interrupts are connected to the first one and some * to the second one. */ -void __init u300_init_irq(void) +static void __init u300_init_irq(void) { u32 mask[2] = {0, 0}; struct clk *clk; @@ -1756,29 +1708,11 @@ static void __init u300_init_check_chip(void) printk(KERN_INFO "Initializing U300 system on %s baseband chip " \ "(chip ID 0x%04x)\n", chipname, val); -#ifdef CONFIG_MACH_U300_BS330 - if ((val & 0xFF00U) != 0xd800) { - printk(KERN_ERR "Platform configured for BS330 " \ - "with DB3200 but %s detected, expect problems!", - chipname); - } -#endif -#ifdef CONFIG_MACH_U300_BS335 if ((val & 0xFF00U) != 0xf000 && (val & 0xFF00U) != 0xf100) { printk(KERN_ERR "Platform configured for BS335 " \ " with DB3350 but %s detected, expect problems!", chipname); } -#endif -#ifdef CONFIG_MACH_U300_BS365 - if ((val & 0xFF00U) != 0xe800) { - printk(KERN_ERR "Platform configured for BS365 " \ - "with DB3210 but %s detected, expect problems!", - chipname); - } -#endif - - } /* @@ -1811,7 +1745,7 @@ static void __init u300_assign_physmem(void) } } -void __init u300_init_devices(void) +static void __init u300_init_machine(void) { int i; u16 val; @@ -1852,7 +1786,7 @@ void __init u300_init_devices(void) /* Forward declare this function from the watchdog */ void coh901327_watchdog_reset(void); -void u300_restart(char mode, const char *cmd) +static void u300_restart(char mode, const char *cmd) { switch (mode) { case 's': @@ -1868,3 +1802,15 @@ void u300_restart(char mode, const char *cmd) /* Wait for system do die/reset. */ while (1); } + +MACHINE_START(U300, "Ericsson AB U335 S335/B335 Prototype Board") + /* Maintainer: Linus Walleij */ + .atag_offset = 0x100, + .map_io = u300_map_io, + .nr_irqs = NR_IRQS_U300, + .init_irq = u300_init_irq, + .handle_irq = vic_handle_irq, + .timer = &u300_timer, + .init_machine = u300_init_machine, + .restart = u300_restart, +MACHINE_END diff --git a/arch/arm/mach-u300/include/mach/dma_channels.h b/arch/arm/mach-u300/dma_channels.h similarity index 88% rename from arch/arm/mach-u300/include/mach/dma_channels.h rename to arch/arm/mach-u300/dma_channels.h index b239149ba0d0..4e8a88fbca49 100644 --- a/arch/arm/mach-u300/include/mach/dma_channels.h +++ b/arch/arm/mach-u300/dma_channels.h @@ -3,7 +3,7 @@ * arch/arm/mach-u300/include/mach/dma_channels.h * * - * Copyright (C) 2007-2009 ST-Ericsson + * Copyright (C) 2007-2012 ST-Ericsson * License terms: GNU General Public License (GPL) version 2 * Map file for the U300 dma driver. * Author: Per Friden @@ -50,19 +50,10 @@ #define U300_DMA_GENERAL_PURPOSE_6 35 #define U300_DMA_GENERAL_PURPOSE_7 36 #define U300_DMA_GENERAL_PURPOSE_8 37 -#ifdef CONFIG_MACH_U300_BS335 #define U300_DMA_UART1_TX 38 #define U300_DMA_UART1_RX 39 -#else -#define U300_DMA_GENERAL_PURPOSE_9 38 -#define U300_DMA_GENERAL_PURPOSE_10 39 -#endif -#ifdef CONFIG_MACH_U300_BS335 #define U300_DMA_DEVICE_CHANNELS 32 -#else -#define U300_DMA_DEVICE_CHANNELS 30 -#endif #define U300_DMA_CHANNELS 40 diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c index cb04bd6ab3e7..0d4620ed853c 100644 --- a/arch/arm/mach-u300/i2c.c +++ b/arch/arm/mach-u300/i2c.c @@ -1,7 +1,7 @@ /* * arch/arm/mach-u300/i2c.c * - * Copyright (C) 2009 ST-Ericsson AB + * Copyright (C) 2009-2012 ST-Ericsson AB * License terms: GNU General Public License (GPL) version 2 * * Register board i2c devices @@ -261,7 +261,6 @@ static struct i2c_board_info __initdata bus0_i2c_board_info[] = { }; static struct i2c_board_info __initdata bus1_i2c_board_info[] = { -#ifdef CONFIG_MACH_U300_BS335 { .type = "fwcam", .addr = 0x10, @@ -270,9 +269,6 @@ static struct i2c_board_info __initdata bus1_i2c_board_info[] = { .type = "fwcam", .addr = 0x5d, }, -#else - { }, -#endif }; void __init u300_i2c_register_board_devices(void) diff --git a/arch/arm/mach-u300/include/mach/clkdev.h b/arch/arm/mach-u300/include/mach/clkdev.h deleted file mode 100644 index 92e3cc872c66..000000000000 --- a/arch/arm/mach-u300/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __MACH_CLKDEV_H -#define __MACH_CLKDEV_H - -int __clk_get(struct clk *clk); -void __clk_put(struct clk *clk); - -#endif diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h index ec09c1e07b1a..e27425a63fa1 100644 --- a/arch/arm/mach-u300/include/mach/irqs.h +++ b/arch/arm/mach-u300/include/mach/irqs.h @@ -3,7 +3,7 @@ * arch/arm/mach-u300/include/mach/irqs.h * * - * Copyright (C) 2006-2009 ST-Ericsson AB + * Copyright (C) 2006-2012 ST-Ericsson AB * License terms: GNU General Public License (GPL) version 2 * IRQ channel definitions for the U300 platforms. * Author: Linus Walleij @@ -31,10 +31,6 @@ #define IRQ_U300_XGAM_GAMCON 14 #define IRQ_U300_XGAM_CDI 15 #define IRQ_U300_XGAM_CDICON 16 -#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) -/* MMIACC not used on the DB3210 or DB3350 chips */ -#define IRQ_U300_XGAM_MMIACC 17 -#endif #define IRQ_U300_XGAM_PDI 18 #define IRQ_U300_XGAM_PDICON 19 #define IRQ_U300_XGAM_GAMEACC 20 @@ -55,8 +51,6 @@ #define IRQ_U300_GPIO_PORT1 34 #define IRQ_U300_GPIO_PORT2 35 -#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) || \ - defined(CONFIG_MACH_U300_BS335) /* These are for DB3150, DB3200 and DB3350 */ #define IRQ_U300_WDOG 36 #define IRQ_U300_EVHIST 37 @@ -68,15 +62,8 @@ #define IRQ_U300_RTC 43 #define IRQ_U300_NFIF 44 #define IRQ_U300_NFIF2 45 -#endif - -/* DB3150 and DB3200 have only 45 IRQs */ -#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) -#define U300_VIC_IRQS_END 46 -#endif /* The DB3350-specific interrupt lines */ -#ifdef CONFIG_MACH_U300_BS335 #define IRQ_U300_ISP_F0 46 #define IRQ_U300_ISP_F1 47 #define IRQ_U300_ISP_F2 48 @@ -89,25 +76,6 @@ #define IRQ_U300_GPIO_PORT5 55 #define IRQ_U300_GPIO_PORT6 56 #define U300_VIC_IRQS_END 57 -#endif - -/* The DB3210-specific interrupt lines */ -#ifdef CONFIG_MACH_U300_BS365 -#define IRQ_U300_GPIO_PORT3 36 -#define IRQ_U300_GPIO_PORT4 37 -#define IRQ_U300_WDOG 38 -#define IRQ_U300_EVHIST 39 -#define IRQ_U300_MSPRO 40 -#define IRQ_U300_MMCSD_MCIINTR0 41 -#define IRQ_U300_MMCSD_MCIINTR1 42 -#define IRQ_U300_I2C0 43 -#define IRQ_U300_I2C1 44 -#define IRQ_U300_RTC 45 -#define IRQ_U300_NFIF 46 -#define IRQ_U300_NFIF2 47 -#define IRQ_U300_SYSCON_PLL_LOCK 48 -#define U300_VIC_IRQS_END 49 -#endif /* Maximum 8*7 GPIO lines */ #ifdef CONFIG_PINCTRL_COH901 @@ -117,6 +85,6 @@ #define IRQ_U300_GPIO_END (U300_VIC_IRQS_END) #endif -#define NR_IRQS (IRQ_U300_GPIO_END - IRQ_U300_INTCON0_START) +#define NR_IRQS_U300 (IRQ_U300_GPIO_END - IRQ_U300_INTCON0_START) #endif diff --git a/arch/arm/mach-u300/include/mach/platform.h b/arch/arm/mach-u300/include/mach/platform.h deleted file mode 100644 index 096333f32fc3..000000000000 --- a/arch/arm/mach-u300/include/mach/platform.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * - * arch/arm/mach-u300/include/mach/platform.h - * - * - * Copyright (C) 2006-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * Basic platform init and mapping functions. - * Author: Linus Walleij - */ - -#ifndef __ASSEMBLY__ - -void u300_map_io(void); -void u300_init_irq(void); -void u300_init_devices(void); -void u300_restart(char, const char *); -extern struct sys_timer u300_timer; - -#endif diff --git a/arch/arm/mach-u300/include/mach/syscon.h b/arch/arm/mach-u300/include/mach/syscon.h index 6e84f07a7c6f..10bdd0be9774 100644 --- a/arch/arm/mach-u300/include/mach/syscon.h +++ b/arch/arm/mach-u300/include/mach/syscon.h @@ -3,7 +3,7 @@ * arch/arm/mach-u300/include/mach/syscon.h * * - * Copyright (C) 2008 ST-Ericsson AB + * Copyright (C) 2008-2012 ST-Ericsson AB * * Author: Rickard Andersson */ @@ -36,9 +36,7 @@ #define U300_SYSCON_CSR_PLL13_LOCK_IND (0x0001) /* Reset lines for SLOW devices 16bit (R/W) */ #define U300_SYSCON_RSR (0x0014) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_RSR_PPM_RESET_EN (0x0200) -#endif #define U300_SYSCON_RSR_ACC_TMR_RESET_EN (0x0100) #define U300_SYSCON_RSR_APP_TMR_RESET_EN (0x0080) #define U300_SYSCON_RSR_RTC_RESET_EN (0x0040) @@ -50,9 +48,7 @@ #define U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN (0x0001) /* Reset lines for FAST devices 16bit (R/W) */ #define U300_SYSCON_RFR (0x0018) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_RFR_UART1_RESET_ENABLE (0x0080) -#endif #define U300_SYSCON_RFR_SPI_RESET_ENABLE (0x0040) #define U300_SYSCON_RFR_MMC_RESET_ENABLE (0x0020) #define U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE (0x0010) @@ -62,10 +58,8 @@ #define U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE (0x0001) /* Reset lines for the rest of the peripherals 16bit (R/W) */ #define U300_SYSCON_RRR (0x001c) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_RRR_CDS_RESET_EN (0x4000) #define U300_SYSCON_RRR_ISP_RESET_EN (0x2000) -#endif #define U300_SYSCON_RRR_INTCON_RESET_EN (0x1000) #define U300_SYSCON_RRR_MSPRO_RESET_EN (0x0800) #define U300_SYSCON_RRR_XGAM_RESET_EN (0x0100) @@ -79,9 +73,7 @@ #define U300_SYSCON_RRR_AAIF_RESET_EN (0x0001) /* Clock enable for SLOW peripherals 16bit (R/W) */ #define U300_SYSCON_CESR (0x0020) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_CESR_PPM_CLK_EN (0x0200) -#endif #define U300_SYSCON_CESR_ACC_TMR_CLK_EN (0x0100) #define U300_SYSCON_CESR_APP_TMR_CLK_EN (0x0080) #define U300_SYSCON_CESR_KEYPAD_CLK_EN (0x0040) @@ -92,24 +84,20 @@ #define U300_SYSCON_CESR_SLOW_BRIDGE_CLK_EN (0x0001) /* Clock enable for FAST peripherals 16bit (R/W) */ #define U300_SYSCON_CEFR (0x0024) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_CEFR_UART1_CLK_EN (0x0200) -#endif #define U300_SYSCON_CEFR_I2S1_CORE_CLK_EN (0x0100) #define U300_SYSCON_CEFR_I2S0_CORE_CLK_EN (0x0080) #define U300_SYSCON_CEFR_SPI_CLK_EN (0x0040) #define U300_SYSCON_CEFR_MMC_CLK_EN (0x0020) -#define U300_SYSCON_CEFR_I2S1_CLK_EN (0x0010) -#define U300_SYSCON_CEFR_I2S0_CLK_EN (0x0008) -#define U300_SYSCON_CEFR_I2C1_CLK_EN (0x0004) -#define U300_SYSCON_CEFR_I2C0_CLK_EN (0x0002) +#define U300_SYSCON_CEFR_I2S1_CLK_EN (0x0010) +#define U300_SYSCON_CEFR_I2S0_CLK_EN (0x0008) +#define U300_SYSCON_CEFR_I2C1_CLK_EN (0x0004) +#define U300_SYSCON_CEFR_I2C0_CLK_EN (0x0002) #define U300_SYSCON_CEFR_FAST_BRIDGE_CLK_EN (0x0001) /* Clock enable for the rest of the peripherals 16bit (R/W) */ #define U300_SYSCON_CERR (0x0028) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_CERR_CDS_CLK_EN (0x2000) #define U300_SYSCON_CERR_ISP_CLK_EN (0x1000) -#endif #define U300_SYSCON_CERR_MSPRO_CLK_EN (0x0800) #define U300_SYSCON_CERR_AHB_SUBSYS_BRIDGE_CLK_EN (0x0400) #define U300_SYSCON_CERR_SEMI_CLK_EN (0x0200) @@ -124,9 +112,7 @@ #define U300_SYSCON_CERR_AAIF_CLK_EN (0x0001) /* Single block clock enable 16bit (-/W) */ #define U300_SYSCON_SBCER (0x002c) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_SBCER_PPM_CLK_EN (0x0009) -#endif #define U300_SYSCON_SBCER_ACC_TMR_CLK_EN (0x0008) #define U300_SYSCON_SBCER_APP_TMR_CLK_EN (0x0007) #define U300_SYSCON_SBCER_KEYPAD_CLK_EN (0x0006) @@ -135,9 +121,7 @@ #define U300_SYSCON_SBCER_BTR_CLK_EN (0x0002) #define U300_SYSCON_SBCER_UART_CLK_EN (0x0001) #define U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN (0x0000) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_SBCER_UART1_CLK_EN (0x0019) -#endif #define U300_SYSCON_SBCER_I2S1_CORE_CLK_EN (0x0018) #define U300_SYSCON_SBCER_I2S0_CORE_CLK_EN (0x0017) #define U300_SYSCON_SBCER_SPI_CLK_EN (0x0016) @@ -147,10 +131,8 @@ #define U300_SYSCON_SBCER_I2C1_CLK_EN (0x0012) #define U300_SYSCON_SBCER_I2C0_CLK_EN (0x0011) #define U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN (0x0010) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_SBCER_CDS_CLK_EN (0x002D) #define U300_SYSCON_SBCER_ISP_CLK_EN (0x002C) -#endif #define U300_SYSCON_SBCER_MSPRO_CLK_EN (0x002B) #define U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN (0x002A) #define U300_SYSCON_SBCER_SEMI_CLK_EN (0x0029) @@ -168,9 +150,7 @@ /* Same values as above for SBCER */ /* Clock force SLOW peripherals 16bit (R/W) */ #define U300_SYSCON_CFSR (0x003c) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_CFSR_PPM_CLK_FORCE_EN (0x0200) -#endif #define U300_SYSCON_CFSR_ACC_TMR_CLK_FORCE_EN (0x0100) #define U300_SYSCON_CFSR_APP_TMR_CLK_FORCE_EN (0x0080) #define U300_SYSCON_CFSR_KEYPAD_CLK_FORCE_EN (0x0020) @@ -184,10 +164,8 @@ /* Values not defined. Define if you want to use them. */ /* Clock force the rest of the peripherals 16bit (R/W) */ #define U300_SYSCON_CFRR (0x44) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_CFRR_CDS_CLK_FORCE_EN (0x2000) #define U300_SYSCON_CFRR_ISP_CLK_FORCE_EN (0x1000) -#endif #define U300_SYSCON_CFRR_MSPRO_CLK_FORCE_EN (0x0800) #define U300_SYSCON_CFRR_AHB_SUBSYS_BRIDGE_CLK_FORCE_EN (0x0400) #define U300_SYSCON_CFRR_SEMI_CLK_FORCE_EN (0x0200) diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h index 65f87c523892..1e49d901f2c9 100644 --- a/arch/arm/mach-u300/include/mach/u300-regs.h +++ b/arch/arm/mach-u300/include/mach/u300-regs.h @@ -28,7 +28,6 @@ #define PLAT_NAND_CLE (1 << 16) #define PLAT_NAND_ALE (1 << 17) - /* AHB Peripherals */ #define U300_AHB_PER_PHYS_BASE 0xa0000000 #define U300_AHB_PER_VIRT_BASE 0xff010000 @@ -46,11 +45,7 @@ #define U300_BOOTROM_VIRT_BASE 0xffff0000 /* SEMI config base */ -#ifdef CONFIG_MACH_U300_BS335 #define U300_SEMI_CONFIG_BASE 0x2FFE0000 -#else -#define U300_SEMI_CONFIG_BASE 0x30000000 -#endif /* * AHB peripherals @@ -99,10 +94,8 @@ /* SPI controller */ #define U300_SPI_BASE (U300_FAST_PER_PHYS_BASE+0x6000) -#ifdef CONFIG_MACH_U300_BS335 /* Fast UART1 on U335 only */ #define U300_UART1_BASE (U300_SLOW_PER_PHYS_BASE+0x7000) -#endif /* * SLOW peripherals @@ -151,10 +144,8 @@ * REST peripherals */ -/* ISP (image signal processor) is only available in U335 */ -#ifdef CONFIG_MACH_U300_BS335 +/* ISP (image signal processor) */ #define U300_ISP_BASE (0xA0008000) -#endif /* DMA Controller base */ #define U300_DMAC_BASE (0xC0020000) @@ -166,17 +157,9 @@ #define U300_APEX_BASE (0xc0030000) /* Video Encoder Base */ -#ifdef CONFIG_MACH_U300_BS335 #define U300_VIDEOENC_BASE (0xc0080000) -#else -#define U300_VIDEOENC_BASE (0xc0040000) -#endif /* XGAM Base */ #define U300_XGAM_BASE (0xd0000000) -/* - * Virtual accessor macros for static devices - */ - #endif diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c index a1affacfa59c..02e6659286d5 100644 --- a/arch/arm/mach-u300/spi.c +++ b/arch/arm/mach-u300/spi.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include "dma_channels.h" /* * The following is for the actual devices on the SSP/SPI bus diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c index 56ac06d38ec1..1da10e20e996 100644 --- a/arch/arm/mach-u300/timer.c +++ b/arch/arm/mach-u300/timer.c @@ -17,14 +17,17 @@ #include #include #include +#include #include +#include /* Generic stuff */ #include #include #include -#include + +#include "timer.h" /* * APP side special timer registers diff --git a/arch/arm/mach-u300/timer.h b/arch/arm/mach-u300/timer.h new file mode 100644 index 000000000000..b5e9791762e0 --- /dev/null +++ b/arch/arm/mach-u300/timer.h @@ -0,0 +1 @@ +extern struct sys_timer u300_timer; diff --git a/arch/arm/mach-u300/u300-gpio.h b/arch/arm/mach-u300/u300-gpio.h index 847dc25300c6..83f50772e169 100644 --- a/arch/arm/mach-u300/u300-gpio.h +++ b/arch/arm/mach-u300/u300-gpio.h @@ -1,50 +1,11 @@ /* - * Individual pin assignments for the B26/S26. Notice that the - * actual usage of these pins depends on the PAD MUX settings, that - * is why the same number can potentially appear several times. - * In the reference design each pin is only used for one purpose. - * These were determined by inspecting the B26/S26 schematic: - * 2/1911-ROA 128 1603 - */ -#ifdef CONFIG_MACH_U300_BS2X -#define U300_GPIO_PIN_UART_RX 0 -#define U300_GPIO_PIN_UART_TX 1 -#define U300_GPIO_PIN_GPIO02 2 /* Unrouted */ -#define U300_GPIO_PIN_GPIO03 3 /* Unrouted */ -#define U300_GPIO_PIN_CAM_SLEEP 4 -#define U300_GPIO_PIN_CAM_REG_EN 5 -#define U300_GPIO_PIN_GPIO06 6 /* Unrouted */ -#define U300_GPIO_PIN_GPIO07 7 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO08 8 /* Service point SP2321 */ -#define U300_GPIO_PIN_GPIO09 9 /* Service point SP2322 */ -#define U300_GPIO_PIN_PHFSENSE 10 /* Headphone jack sensing */ -#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */ -#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */ -#define U300_GPIO_PIN_FLIPSENSE 13 /* Mechanical flip sensing */ -#define U300_GPIO_PIN_GPIO14 14 /* DSP JTAG Port RTCK */ -#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO16 16 /* Unrouted */ -#define U300_GPIO_PIN_GPIO17 17 /* Unrouted */ -#define U300_GPIO_PIN_GPIO18 18 /* Unrouted */ -#define U300_GPIO_PIN_GPIO19 19 /* Unrouted */ -#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */ -#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */ -#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */ -#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */ -#endif - -/* - * Individual pin assignments for the B330/S330 and B365/S365. + * Individual pin assignments for the B335/S335. * Notice that the actual usage of these pins depends on the * PAD MUX settings, that is why the same number can potentially * appear several times. In the reference design each pin is only * used for one purpose. These were determined by inspecting the * S365 schematic. */ -#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \ - defined(CONFIG_MACH_U300_BS335) #define U300_GPIO_PIN_UART_RX 0 #define U300_GPIO_PIN_UART_TX 1 #define U300_GPIO_PIN_UART_CTS 2 @@ -90,8 +51,6 @@ #define U300_GPIO_PIN_GPIO38 38 /* Unrouted */ #define U300_GPIO_PIN_GPIO39 39 /* Unrouted */ -#ifdef CONFIG_MACH_U300_BS335 - #define U300_GPIO_PIN_GPIO40 40 /* Unrouted */ #define U300_GPIO_PIN_GPIO41 41 /* Unrouted */ #define U300_GPIO_PIN_GPIO42 42 /* Unrouted */ @@ -109,6 +68,3 @@ #define U300_GPIO_PIN_GPIO53 53 /* Unrouted */ #define U300_GPIO_PIN_GPIO54 54 /* Unrouted */ #define U300_GPIO_PIN_GPIO55 55 /* Unrouted */ -#endif - -#endif diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c deleted file mode 100644 index f30c69d91d99..000000000000 --- a/arch/arm/mach-u300/u300.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * - * arch/arm/mach-u300/u300.c - * - * - * Copyright (C) 2006-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * Platform machine definition. - * Author: Linus Walleij - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static void __init u300_init_machine(void) -{ - u300_init_devices(); -} - -#ifdef CONFIG_MACH_U300_BS2X -#define MACH_U300_STRING "Ericsson AB U300 S25/S26/B25/B26 Prototype Board" -#endif - -#ifdef CONFIG_MACH_U300_BS330 -#define MACH_U300_STRING "Ericsson AB U330 S330/B330 Prototype Board" -#endif - -#ifdef CONFIG_MACH_U300_BS335 -#define MACH_U300_STRING "Ericsson AB U335 S335/B335 Prototype Board" -#endif - -#ifdef CONFIG_MACH_U300_BS365 -#define MACH_U300_STRING "Ericsson AB U365 S365/B365 Prototype Board" -#endif - -MACHINE_START(U300, MACH_U300_STRING) - /* Maintainer: Linus Walleij */ - .atag_offset = 0x100, - .map_io = u300_map_io, - .init_irq = u300_init_irq, - .handle_irq = vic_handle_irq, - .timer = &u300_timer, - .init_machine = u300_init_machine, - .restart = u300_restart, -MACHINE_END diff --git a/drivers/pinctrl/pinctrl-coh901.c b/drivers/pinctrl/pinctrl-coh901.c index cc0f00d73d15..b446c9641212 100644 --- a/drivers/pinctrl/pinctrl-coh901.c +++ b/drivers/pinctrl/pinctrl-coh901.c @@ -1,11 +1,8 @@ /* * U300 GPIO module. * - * Copyright (C) 2007-2011 ST-Ericsson AB + * Copyright (C) 2007-2012 ST-Ericsson AB * License terms: GNU General Public License (GPL) version 2 - * This can driver either of the two basic GPIO cores - * available in the U300 platforms: - * COH 901 335 - Used in DB3150 (U300 1.0) and DB3200 (U330 1.0) * COH 901 571/3 - Used in DB3210 (U365 2.0) and DB3350 (U335 1.0) * Author: Linus Walleij * Author: Jonas Aaberg @@ -24,19 +21,22 @@ #include #include #include -#include +#include #include "pinctrl-coh901.h" +#define U300_GPIO_PORT_STRIDE (0x30) /* - * Register definitions for COH 901 335 variant + * Control Register 32bit (R/W) + * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores + * gives the number of GPIO pins. + * bit 8-2 (mask 0x000001FC) contains the core version ID. */ -#define U300_335_PORT_STRIDE (0x1C) -/* Port X Pin Data Register 32bit, this is both input and output (R/W) */ -#define U300_335_PXPDIR (0x00) -#define U300_335_PXPDOR (0x00) -/* Port X Pin Config Register 32bit (R/W) */ -#define U300_335_PXPCR (0x04) -/* This register layout is the same in both blocks */ +#define U300_GPIO_CR (0x00) +#define U300_GPIO_CR_SYNC_SEL_ENABLE (0x00000002UL) +#define U300_GPIO_CR_BLOCK_CLKRQ_ENABLE (0x00000001UL) +#define U300_GPIO_PXPDIR (0x04) +#define U300_GPIO_PXPDOR (0x08) +#define U300_GPIO_PXPCR (0x0C) #define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL) #define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL) #define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL) @@ -44,53 +44,17 @@ #define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL) #define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL) #define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL) -/* Port X Interrupt Event Register 32bit (R/W) */ -#define U300_335_PXIEV (0x08) -/* Port X Interrupt Enable Register 32bit (R/W) */ -#define U300_335_PXIEN (0x0C) -/* Port X Interrupt Force Register 32bit (R/W) */ -#define U300_335_PXIFR (0x10) -/* Port X Interrupt Config Register 32bit (R/W) */ -#define U300_335_PXICR (0x14) -/* This register layout is the same in both blocks */ +#define U300_GPIO_PXPER (0x10) +#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL) +#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL) +#define U300_GPIO_PXIEV (0x14) +#define U300_GPIO_PXIEN (0x18) +#define U300_GPIO_PXIFR (0x1C) +#define U300_GPIO_PXICR (0x20) #define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL) #define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL) #define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL) #define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL) -/* Port X Pull-up Enable Register 32bit (R/W) */ -#define U300_335_PXPER (0x18) -/* This register layout is the same in both blocks */ -#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL) -#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL) -/* Control Register 32bit (R/W) */ -#define U300_335_CR (0x54) -#define U300_335_CR_BLOCK_CLOCK_ENABLE (0x00000001UL) - -/* - * Register definitions for COH 901 571 / 3 variant - */ -#define U300_571_PORT_STRIDE (0x30) -/* - * Control Register 32bit (R/W) - * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores - * gives the number of GPIO pins. - * bit 8-2 (mask 0x000001FC) contains the core version ID. - */ -#define U300_571_CR (0x00) -#define U300_571_CR_SYNC_SEL_ENABLE (0x00000002UL) -#define U300_571_CR_BLOCK_CLKRQ_ENABLE (0x00000001UL) -/* - * These registers have the same layout and function as the corresponding - * COH 901 335 registers, just at different offset. - */ -#define U300_571_PXPDIR (0x04) -#define U300_571_PXPDOR (0x08) -#define U300_571_PXPCR (0x0C) -#define U300_571_PXPER (0x10) -#define U300_571_PXIEV (0x14) -#define U300_571_PXIEN (0x18) -#define U300_571_PXIFR (0x1C) -#define U300_571_PXICR (0x20) /* 8 bits per port, no version has more than 7 ports */ #define U300_GPIO_PINS_PER_PORT 8 @@ -149,8 +113,6 @@ struct u300_gpio_confdata { /* BS335 has seven ports of 8 bits each = GPIO pins 0..55 */ #define BS335_GPIO_NUM_PORTS 7 -/* BS365 has five ports of 8 bits each = GPIO pins 0..39 */ -#define BS365_GPIO_NUM_PORTS 5 #define U300_FLOATING_INPUT { \ .bias_mode = PIN_CONFIG_BIAS_HIGH_IMPEDANCE, \ @@ -172,7 +134,6 @@ struct u300_gpio_confdata { .outval = 1, \ } - /* Initial configuration */ static const struct __initconst u300_gpio_confdata bs335_gpio_config[BS335_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = { @@ -255,66 +216,6 @@ bs335_gpio_config[BS335_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = { } }; -static const struct __initconst u300_gpio_confdata -bs365_gpio_config[BS365_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = { - /* Port 0, pins 0-7 */ - { - U300_FLOATING_INPUT, - U300_OUTPUT_LOW, - U300_FLOATING_INPUT, - U300_OUTPUT_LOW, - U300_OUTPUT_LOW, - U300_OUTPUT_LOW, - U300_PULL_UP_INPUT, - U300_FLOATING_INPUT, - }, - /* Port 1, pins 0-7 */ - { - U300_OUTPUT_LOW, - U300_FLOATING_INPUT, - U300_OUTPUT_LOW, - U300_FLOATING_INPUT, - U300_FLOATING_INPUT, - U300_OUTPUT_HIGH, - U300_OUTPUT_LOW, - U300_OUTPUT_LOW, - }, - /* Port 2, pins 0-7 */ - { - U300_FLOATING_INPUT, - U300_PULL_UP_INPUT, - U300_OUTPUT_LOW, - U300_OUTPUT_LOW, - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - }, - /* Port 3, pins 0-7 */ - { - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - }, - /* Port 4, pins 0-7 */ - { - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - /* These 4 pins doesn't exist on DB3210 */ - U300_OUTPUT_LOW, - U300_OUTPUT_LOW, - U300_OUTPUT_LOW, - U300_OUTPUT_LOW, - } -}; - /** * to_u300_gpio() - get the pointer to u300_gpio * @chip: the gpio chip member of the structure u300_gpio @@ -716,13 +617,7 @@ static void __init u300_gpio_init_coh901571(struct u300_gpio *gpio, const struct u300_gpio_confdata *conf; int offset = (i*8) + j; - if (plat->variant == U300_GPIO_COH901571_3_BS335) - conf = &bs335_gpio_config[i][j]; - else if (plat->variant == U300_GPIO_COH901571_3_BS365) - conf = &bs365_gpio_config[i][j]; - else - break; - + conf = &bs335_gpio_config[i][j]; u300_gpio_init_pin(gpio, offset, conf); } } @@ -796,50 +691,27 @@ static int __init u300_gpio_probe(struct platform_device *pdev) goto err_no_ioremap; } - if (plat->variant == U300_GPIO_COH901335) { - dev_info(gpio->dev, - "initializing GPIO Controller COH 901 335\n"); - gpio->stride = U300_335_PORT_STRIDE; - gpio->pcr = U300_335_PXPCR; - gpio->dor = U300_335_PXPDOR; - gpio->dir = U300_335_PXPDIR; - gpio->per = U300_335_PXPER; - gpio->icr = U300_335_PXICR; - gpio->ien = U300_335_PXIEN; - gpio->iev = U300_335_PXIEV; - ifr = U300_335_PXIFR; + dev_info(gpio->dev, + "initializing GPIO Controller COH 901 571/3\n"); + gpio->stride = U300_GPIO_PORT_STRIDE; + gpio->pcr = U300_GPIO_PXPCR; + gpio->dor = U300_GPIO_PXPDOR; + gpio->dir = U300_GPIO_PXPDIR; + gpio->per = U300_GPIO_PXPER; + gpio->icr = U300_GPIO_PXICR; + gpio->ien = U300_GPIO_PXIEN; + gpio->iev = U300_GPIO_PXIEV; + ifr = U300_GPIO_PXIFR; - /* Turn on the GPIO block */ - writel(U300_335_CR_BLOCK_CLOCK_ENABLE, - gpio->base + U300_335_CR); - } else if (plat->variant == U300_GPIO_COH901571_3_BS335 || - plat->variant == U300_GPIO_COH901571_3_BS365) { - dev_info(gpio->dev, - "initializing GPIO Controller COH 901 571/3\n"); - gpio->stride = U300_571_PORT_STRIDE; - gpio->pcr = U300_571_PXPCR; - gpio->dor = U300_571_PXPDOR; - gpio->dir = U300_571_PXPDIR; - gpio->per = U300_571_PXPER; - gpio->icr = U300_571_PXICR; - gpio->ien = U300_571_PXIEN; - gpio->iev = U300_571_PXIEV; - ifr = U300_571_PXIFR; - - val = readl(gpio->base + U300_571_CR); - dev_info(gpio->dev, "COH901571/3 block version: %d, " \ - "number of cores: %d totalling %d pins\n", - ((val & 0x000001FC) >> 2), - ((val & 0x0000FE00) >> 9), - ((val & 0x0000FE00) >> 9) * 8); - writel(U300_571_CR_BLOCK_CLKRQ_ENABLE, - gpio->base + U300_571_CR); - u300_gpio_init_coh901571(gpio, plat); - } else { - dev_err(gpio->dev, "unknown block variant\n"); - err = -ENODEV; - goto err_unknown_variant; - } + val = readl(gpio->base + U300_GPIO_CR); + dev_info(gpio->dev, "COH901571/3 block version: %d, " \ + "number of cores: %d totalling %d pins\n", + ((val & 0x000001FC) >> 2), + ((val & 0x0000FE00) >> 9), + ((val & 0x0000FE00) >> 9) * 8); + writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, + gpio->base + U300_GPIO_CR); + u300_gpio_init_coh901571(gpio, plat); /* Add each port with its IRQ separately */ INIT_LIST_HEAD(&gpio->port_list); @@ -906,7 +778,6 @@ err_no_pinctrl: err_no_chip: err_no_port: u300_gpio_free_ports(gpio); -err_unknown_variant: iounmap(gpio->base); err_no_ioremap: release_mem_region(gpio->memres->start, resource_size(gpio->memres)); @@ -923,16 +794,11 @@ err_no_clk: static int __exit u300_gpio_remove(struct platform_device *pdev) { - struct u300_gpio_platform *plat = dev_get_platdata(&pdev->dev); struct u300_gpio *gpio = platform_get_drvdata(pdev); int err; /* Turn off the GPIO block */ - if (plat->variant == U300_GPIO_COH901335) - writel(0x00000000U, gpio->base + U300_335_CR); - if (plat->variant == U300_GPIO_COH901571_3_BS335 || - plat->variant == U300_GPIO_COH901571_3_BS365) - writel(0x00000000U, gpio->base + U300_571_CR); + writel(0x00000000U, gpio->base + U300_GPIO_CR); err = gpiochip_remove(&gpio->chip); if (err < 0) { diff --git a/arch/arm/mach-u300/include/mach/gpio-u300.h b/include/linux/platform_data/pinctrl-coh901.h similarity index 72% rename from arch/arm/mach-u300/include/mach/gpio-u300.h rename to include/linux/platform_data/pinctrl-coh901.h index e81400c1753a..30dea251b835 100644 --- a/arch/arm/mach-u300/include/mach/gpio-u300.h +++ b/include/linux/platform_data/pinctrl-coh901.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2007-2011 ST-Ericsson AB + * Copyright (C) 2007-2012 ST-Ericsson AB * License terms: GNU General Public License (GPL) version 2 * GPIO block resgister definitions and inline macros for * U300 GPIO COH 901 335 or COH 901 571/3 @@ -9,25 +9,14 @@ #ifndef __MACH_U300_GPIO_U300_H #define __MACH_U300_GPIO_U300_H -/** - * enum u300_gpio_variant - the type of U300 GPIO employed - */ -enum u300_gpio_variant { - U300_GPIO_COH901335, - U300_GPIO_COH901571_3_BS335, - U300_GPIO_COH901571_3_BS365, -}; - /** * struct u300_gpio_platform - U300 GPIO platform data - * @variant: IP block variant * @ports: number of GPIO block ports * @gpio_base: first GPIO number for this block (use a free range) * @gpio_irq_base: first GPIO IRQ number for this block (use a free range) * @pinctrl_device: pin control device to spawn as child */ struct u300_gpio_platform { - enum u300_gpio_variant variant; u8 ports; int gpio_base; int gpio_irq_base;