From 647ad49ca672b80a3fbf8396bd453ef68ba4916c Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Mon, 22 Oct 2018 22:10:59 +0200 Subject: [PATCH] staging: Remove the mt29f_spinand driver A new SPI NAND subsystem has been added in drivers/mtd/nand/spi/ and Micron's MT29F devices are now supported in drivers/mtd/nand/spi/micron.c. Remove the old driver. Signed-off-by: Boris Brezillon Acked-by: Greg Kroah-Hartman Signed-off-by: Miquel Raynal --- drivers/staging/Kconfig | 2 - drivers/staging/Makefile | 1 - drivers/staging/mt29f_spinand/Kconfig | 16 - drivers/staging/mt29f_spinand/Makefile | 1 - drivers/staging/mt29f_spinand/TODO | 13 - drivers/staging/mt29f_spinand/mt29f_spinand.c | 980 ------------------ drivers/staging/mt29f_spinand/mt29f_spinand.h | 106 -- 7 files changed, 1119 deletions(-) delete mode 100644 drivers/staging/mt29f_spinand/Kconfig delete mode 100644 drivers/staging/mt29f_spinand/Makefile delete mode 100644 drivers/staging/mt29f_spinand/TODO delete mode 100644 drivers/staging/mt29f_spinand/mt29f_spinand.c delete mode 100644 drivers/staging/mt29f_spinand/mt29f_spinand.h diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 7c015536360d..e4f608815c05 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -78,8 +78,6 @@ source "drivers/staging/goldfish/Kconfig" source "drivers/staging/netlogic/Kconfig" -source "drivers/staging/mt29f_spinand/Kconfig" - source "drivers/staging/gs_fpgaboot/Kconfig" source "drivers/staging/unisys/Kconfig" diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index a79b3fe20cf0..5868631e8f1b 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -29,7 +29,6 @@ obj-$(CONFIG_STAGING_BOARD) += board/ obj-$(CONFIG_LTE_GDM724X) += gdm724x/ obj-$(CONFIG_FIREWIRE_SERIAL) += fwserial/ obj-$(CONFIG_GOLDFISH) += goldfish/ -obj-$(CONFIG_MTD_SPINAND_MT29F) += mt29f_spinand/ obj-$(CONFIG_GS_FPGABOOT) += gs_fpgaboot/ obj-$(CONFIG_UNISYSSPAR) += unisys/ obj-$(CONFIG_COMMON_CLK_XLNX_CLKWZRD) += clocking-wizard/ diff --git a/drivers/staging/mt29f_spinand/Kconfig b/drivers/staging/mt29f_spinand/Kconfig deleted file mode 100644 index f3f9cb3b5c35..000000000000 --- a/drivers/staging/mt29f_spinand/Kconfig +++ /dev/null @@ -1,16 +0,0 @@ -config MTD_SPINAND_MT29F - tristate "SPINAND Device Support for Micron" - depends on MTD_NAND && SPI - help - This enables support for accessing Micron SPI NAND flash - devices. - If you have Micron SPI NAND chip say yes. - - If unsure, say no here. - -config MTD_SPINAND_ONDIEECC - bool "Use SPINAND internal ECC" - depends on MTD_SPINAND_MT29F - help - Internal ECC. - Enables Hardware ECC support for Micron SPI NAND. diff --git a/drivers/staging/mt29f_spinand/Makefile b/drivers/staging/mt29f_spinand/Makefile deleted file mode 100644 index e47af0f7fda9..000000000000 --- a/drivers/staging/mt29f_spinand/Makefile +++ /dev/null @@ -1 +0,0 @@ -obj-$(CONFIG_MTD_SPINAND_MT29F) += mt29f_spinand.o diff --git a/drivers/staging/mt29f_spinand/TODO b/drivers/staging/mt29f_spinand/TODO deleted file mode 100644 index a2209b72d371..000000000000 --- a/drivers/staging/mt29f_spinand/TODO +++ /dev/null @@ -1,13 +0,0 @@ -TODO: - - Tested on XLP platform, needs to be tested on other platforms. - - Checkpatch.pl cleanups - - Sparce fixes. - - Clean up coding style to meet kernel standard. - -Please send patches -To: -Kamlakant Patel -Cc: -Greg Kroah-Hartman -Mona Anonuevo -linux-mtd@lists.infradead.org diff --git a/drivers/staging/mt29f_spinand/mt29f_spinand.c b/drivers/staging/mt29f_spinand/mt29f_spinand.c deleted file mode 100644 index def8a1f57d1c..000000000000 --- a/drivers/staging/mt29f_spinand/mt29f_spinand.c +++ /dev/null @@ -1,980 +0,0 @@ -/* - * Copyright (c) 2003-2013 Broadcom Corporation - * - * Copyright (c) 2009-2010 Micron Technology, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include - -#include "mt29f_spinand.h" - -#define BUFSIZE (10 * 64 * 2048) -#define CACHE_BUF 2112 -/* - * OOB area specification layout: Total 32 available free bytes. - */ - -static inline struct spinand_state *mtd_to_state(struct mtd_info *mtd) -{ - struct nand_chip *chip = mtd_to_nand(mtd); - struct spinand_info *info = nand_get_controller_data(chip); - struct spinand_state *state = info->priv; - - return state; -} - -#ifdef CONFIG_MTD_SPINAND_ONDIEECC -static int enable_hw_ecc; -static int enable_read_hw_ecc; - -static int spinand_ooblayout_64_ecc(struct mtd_info *mtd, int section, - struct mtd_oob_region *oobregion) -{ - if (section > 3) - return -ERANGE; - - oobregion->offset = (section * 16) + 1; - oobregion->length = 6; - - return 0; -} - -static int spinand_ooblayout_64_free(struct mtd_info *mtd, int section, - struct mtd_oob_region *oobregion) -{ - if (section > 3) - return -ERANGE; - - oobregion->offset = (section * 16) + 8; - oobregion->length = 8; - - return 0; -} - -static const struct mtd_ooblayout_ops spinand_oob_64_ops = { - .ecc = spinand_ooblayout_64_ecc, - .free = spinand_ooblayout_64_free, -}; -#endif - -/** - * spinand_cmd - process a command to send to the SPI Nand - * Description: - * Set up the command buffer to send to the SPI controller. - * The command buffer has to initialized to 0. - */ - -static int spinand_cmd(struct spi_device *spi, struct spinand_cmd *cmd) -{ - struct spi_message message; - struct spi_transfer x[4]; - u8 dummy = 0xff; - - spi_message_init(&message); - memset(x, 0, sizeof(x)); - - x[0].len = 1; - x[0].tx_buf = &cmd->cmd; - spi_message_add_tail(&x[0], &message); - - if (cmd->n_addr) { - x[1].len = cmd->n_addr; - x[1].tx_buf = cmd->addr; - spi_message_add_tail(&x[1], &message); - } - - if (cmd->n_dummy) { - x[2].len = cmd->n_dummy; - x[2].tx_buf = &dummy; - spi_message_add_tail(&x[2], &message); - } - - if (cmd->n_tx) { - x[3].len = cmd->n_tx; - x[3].tx_buf = cmd->tx_buf; - spi_message_add_tail(&x[3], &message); - } - - if (cmd->n_rx) { - x[3].len = cmd->n_rx; - x[3].rx_buf = cmd->rx_buf; - spi_message_add_tail(&x[3], &message); - } - - return spi_sync(spi, &message); -} - -/** - * spinand_read_id - Read SPI Nand ID - * Description: - * read two ID bytes from the SPI Nand device - */ -static int spinand_read_id(struct spi_device *spi_nand, u8 *id) -{ - int retval; - u8 nand_id[3]; - struct spinand_cmd cmd = {0}; - - cmd.cmd = CMD_READ_ID; - cmd.n_rx = 3; - cmd.rx_buf = &nand_id[0]; - - retval = spinand_cmd(spi_nand, &cmd); - if (retval < 0) { - dev_err(&spi_nand->dev, "error %d reading id\n", retval); - return retval; - } - id[0] = nand_id[1]; - id[1] = nand_id[2]; - return retval; -} - -/** - * spinand_read_status - send command 0xf to the SPI Nand status register - * Description: - * After read, write, or erase, the Nand device is expected to set the - * busy status. - * This function is to allow reading the status of the command: read, - * write, and erase. - * Once the status turns to be ready, the other status bits also are - * valid status bits. - */ -static int spinand_read_status(struct spi_device *spi_nand, u8 *status) -{ - struct spinand_cmd cmd = {0}; - int ret; - - cmd.cmd = CMD_READ_REG; - cmd.n_addr = 1; - cmd.addr[0] = REG_STATUS; - cmd.n_rx = 1; - cmd.rx_buf = status; - - ret = spinand_cmd(spi_nand, &cmd); - if (ret < 0) - dev_err(&spi_nand->dev, "err: %d read status register\n", ret); - - return ret; -} - -#define MAX_WAIT_JIFFIES (40 * HZ) -static int wait_till_ready(struct spi_device *spi_nand) -{ - unsigned long deadline; - int retval; - u8 stat = 0; - - deadline = jiffies + MAX_WAIT_JIFFIES; - do { - retval = spinand_read_status(spi_nand, &stat); - if (retval < 0) - return -1; - if (!(stat & 0x1)) - break; - - cond_resched(); - } while (!time_after_eq(jiffies, deadline)); - - if ((stat & 0x1) == 0) - return 0; - - return -1; -} - -/** - * spinand_get_otp - send command 0xf to read the SPI Nand OTP register - * Description: - * There is one bit( bit 0x10 ) to set or to clear the internal ECC. - * Enable chip internal ECC, set the bit to 1 - * Disable chip internal ECC, clear the bit to 0 - */ -static int spinand_get_otp(struct spi_device *spi_nand, u8 *otp) -{ - struct spinand_cmd cmd = {0}; - int retval; - - cmd.cmd = CMD_READ_REG; - cmd.n_addr = 1; - cmd.addr[0] = REG_OTP; - cmd.n_rx = 1; - cmd.rx_buf = otp; - - retval = spinand_cmd(spi_nand, &cmd); - if (retval < 0) - dev_err(&spi_nand->dev, "error %d get otp\n", retval); - return retval; -} - -/** - * spinand_set_otp - send command 0x1f to write the SPI Nand OTP register - * Description: - * There is one bit( bit 0x10 ) to set or to clear the internal ECC. - * Enable chip internal ECC, set the bit to 1 - * Disable chip internal ECC, clear the bit to 0 - */ -static int spinand_set_otp(struct spi_device *spi_nand, u8 *otp) -{ - int retval; - struct spinand_cmd cmd = {0}; - - cmd.cmd = CMD_WRITE_REG; - cmd.n_addr = 1; - cmd.addr[0] = REG_OTP; - cmd.n_tx = 1; - cmd.tx_buf = otp; - - retval = spinand_cmd(spi_nand, &cmd); - if (retval < 0) - dev_err(&spi_nand->dev, "error %d set otp\n", retval); - - return retval; -} - -#ifdef CONFIG_MTD_SPINAND_ONDIEECC -/** - * spinand_enable_ecc - send command 0x1f to write the SPI Nand OTP register - * Description: - * There is one bit( bit 0x10 ) to set or to clear the internal ECC. - * Enable chip internal ECC, set the bit to 1 - * Disable chip internal ECC, clear the bit to 0 - */ -static int spinand_enable_ecc(struct spi_device *spi_nand) -{ - int retval; - u8 otp = 0; - - retval = spinand_get_otp(spi_nand, &otp); - if (retval < 0) - return retval; - - if ((otp & OTP_ECC_MASK) == OTP_ECC_MASK) - return 0; - otp |= OTP_ECC_MASK; - retval = spinand_set_otp(spi_nand, &otp); - if (retval < 0) - return retval; - return spinand_get_otp(spi_nand, &otp); -} -#endif - -static int spinand_disable_ecc(struct spi_device *spi_nand) -{ - int retval; - u8 otp = 0; - - retval = spinand_get_otp(spi_nand, &otp); - if (retval < 0) - return retval; - - if ((otp & OTP_ECC_MASK) == OTP_ECC_MASK) { - otp &= ~OTP_ECC_MASK; - retval = spinand_set_otp(spi_nand, &otp); - if (retval < 0) - return retval; - return spinand_get_otp(spi_nand, &otp); - } - return 0; -} - -/** - * spinand_write_enable - send command 0x06 to enable write or erase the - * Nand cells - * Description: - * Before write and erase the Nand cells, the write enable has to be set. - * After the write or erase, the write enable bit is automatically - * cleared (status register bit 2) - * Set the bit 2 of the status register has the same effect - */ -static int spinand_write_enable(struct spi_device *spi_nand) -{ - struct spinand_cmd cmd = {0}; - - cmd.cmd = CMD_WR_ENABLE; - return spinand_cmd(spi_nand, &cmd); -} - -static int spinand_read_page_to_cache(struct spi_device *spi_nand, u16 page_id) -{ - struct spinand_cmd cmd = {0}; - u16 row; - - row = page_id; - cmd.cmd = CMD_READ; - cmd.n_addr = 3; - cmd.addr[0] = (u8)((row & 0xff0000) >> 16); - cmd.addr[1] = (u8)((row & 0xff00) >> 8); - cmd.addr[2] = (u8)(row & 0x00ff); - - return spinand_cmd(spi_nand, &cmd); -} - -/** - * spinand_read_from_cache - send command 0x03 to read out the data from the - * cache register (2112 bytes max) - * Description: - * The read can specify 1 to 2112 bytes of data read at the corresponding - * locations. - * No tRd delay. - */ -static int spinand_read_from_cache(struct spi_device *spi_nand, u16 page_id, - u16 byte_id, u16 len, u8 *rbuf) -{ - struct spinand_cmd cmd = {0}; - u16 column; - - column = byte_id; - cmd.cmd = CMD_READ_RDM; - cmd.n_addr = 3; - cmd.addr[0] = (u8)((column & 0xff00) >> 8); - cmd.addr[0] |= (u8)(((page_id >> 6) & 0x1) << 4); - cmd.addr[1] = (u8)(column & 0x00ff); - cmd.addr[2] = (u8)(0xff); - cmd.n_dummy = 0; - cmd.n_rx = len; - cmd.rx_buf = rbuf; - - return spinand_cmd(spi_nand, &cmd); -} - -/** - * spinand_read_page - read a page - * @page_id: the physical page number - * @offset: the location from 0 to 2111 - * @len: number of bytes to read - * @rbuf: read buffer to hold @len bytes - * - * Description: - * The read includes two commands to the Nand - 0x13 and 0x03 commands - * Poll to read status to wait for tRD time. - */ -static int spinand_read_page(struct spi_device *spi_nand, u16 page_id, - u16 offset, u16 len, u8 *rbuf) -{ - int ret; - u8 status = 0; - -#ifdef CONFIG_MTD_SPINAND_ONDIEECC - if (enable_read_hw_ecc) { - if (spinand_enable_ecc(spi_nand) < 0) - dev_err(&spi_nand->dev, "enable HW ECC failed!"); - } -#endif - ret = spinand_read_page_to_cache(spi_nand, page_id); - if (ret < 0) - return ret; - - if (wait_till_ready(spi_nand)) - dev_err(&spi_nand->dev, "WAIT timedout!!!\n"); - - while (1) { - ret = spinand_read_status(spi_nand, &status); - if (ret < 0) { - dev_err(&spi_nand->dev, - "err %d read status register\n", ret); - return ret; - } - - if ((status & STATUS_OIP_MASK) == STATUS_READY) { - if ((status & STATUS_ECC_MASK) == STATUS_ECC_ERROR) { - dev_err(&spi_nand->dev, "ecc error, page=%d\n", - page_id); - return 0; - } - break; - } - } - - ret = spinand_read_from_cache(spi_nand, page_id, offset, len, rbuf); - if (ret < 0) { - dev_err(&spi_nand->dev, "read from cache failed!!\n"); - return ret; - } - -#ifdef CONFIG_MTD_SPINAND_ONDIEECC - if (enable_read_hw_ecc) { - ret = spinand_disable_ecc(spi_nand); - if (ret < 0) { - dev_err(&spi_nand->dev, "disable ecc failed!!\n"); - return ret; - } - enable_read_hw_ecc = 0; - } -#endif - return ret; -} - -/** - * spinand_program_data_to_cache - write a page to cache - * @byte_id: the location to write to the cache - * @len: number of bytes to write - * @wbuf: write buffer holding @len bytes - * - * Description: - * The write command used here is 0x84--indicating that the cache is - * not cleared first. - * Since it is writing the data to cache, there is no tPROG time. - */ -static int spinand_program_data_to_cache(struct spi_device *spi_nand, - u16 page_id, u16 byte_id, - u16 len, u8 *wbuf) -{ - struct spinand_cmd cmd = {0}; - u16 column; - - column = byte_id; - cmd.cmd = CMD_PROG_PAGE_CLRCACHE; - cmd.n_addr = 2; - cmd.addr[0] = (u8)((column & 0xff00) >> 8); - cmd.addr[0] |= (u8)(((page_id >> 6) & 0x1) << 4); - cmd.addr[1] = (u8)(column & 0x00ff); - cmd.n_tx = len; - cmd.tx_buf = wbuf; - - return spinand_cmd(spi_nand, &cmd); -} - -/** - * spinand_program_execute - write a page from cache to the Nand array - * @page_id: the physical page location to write the page. - * - * Description: - * The write command used here is 0x10--indicating the cache is writing to - * the Nand array. - * Need to wait for tPROG time to finish the transaction. - */ -static int spinand_program_execute(struct spi_device *spi_nand, u16 page_id) -{ - struct spinand_cmd cmd = {0}; - u16 row; - - row = page_id; - cmd.cmd = CMD_PROG_PAGE_EXC; - cmd.n_addr = 3; - cmd.addr[0] = (u8)((row & 0xff0000) >> 16); - cmd.addr[1] = (u8)((row & 0xff00) >> 8); - cmd.addr[2] = (u8)(row & 0x00ff); - - return spinand_cmd(spi_nand, &cmd); -} - -/** - * spinand_program_page - write a page - * @page_id: the physical page location to write the page. - * @offset: the location from the cache starting from 0 to 2111 - * @len: the number of bytes to write - * @buf: the buffer holding @len bytes - * - * Description: - * The commands used here are 0x06, 0x84, and 0x10--indicating that - * the write enable is first sent, the write cache command, and the - * write execute command. - * Poll to wait for the tPROG time to finish the transaction. - */ -static int spinand_program_page(struct spi_device *spi_nand, - u16 page_id, u16 offset, u16 len, u8 *buf) -{ - int retval; - u8 status = 0; - u8 *wbuf; -#ifdef CONFIG_MTD_SPINAND_ONDIEECC - unsigned int i, j; - - wbuf = devm_kzalloc(&spi_nand->dev, CACHE_BUF, GFP_KERNEL); - if (!wbuf) - return -ENOMEM; - - enable_read_hw_ecc = 1; - retval = spinand_read_page(spi_nand, page_id, 0, CACHE_BUF, wbuf); - if (retval < 0) { - dev_err(&spi_nand->dev, "ecc error on read page!!!\n"); - return retval; - } - - for (i = offset, j = 0; i < len; i++, j++) - wbuf[i] &= buf[j]; - - if (enable_hw_ecc) { - retval = spinand_enable_ecc(spi_nand); - if (retval < 0) { - dev_err(&spi_nand->dev, "enable ecc failed!!\n"); - return retval; - } - } -#else - wbuf = buf; -#endif - retval = spinand_write_enable(spi_nand); - if (retval < 0) { - dev_err(&spi_nand->dev, "write enable failed!!\n"); - return retval; - } - if (wait_till_ready(spi_nand)) - dev_err(&spi_nand->dev, "wait timedout!!!\n"); - - retval = spinand_program_data_to_cache(spi_nand, page_id, - offset, len, wbuf); - if (retval < 0) - return retval; - retval = spinand_program_execute(spi_nand, page_id); - if (retval < 0) - return retval; - while (1) { - retval = spinand_read_status(spi_nand, &status); - if (retval < 0) { - dev_err(&spi_nand->dev, - "error %d reading status register\n", retval); - return retval; - } - - if ((status & STATUS_OIP_MASK) == STATUS_READY) { - if ((status & STATUS_P_FAIL_MASK) == STATUS_P_FAIL) { - dev_err(&spi_nand->dev, - "program error, page %d\n", page_id); - return -1; - } - break; - } - } -#ifdef CONFIG_MTD_SPINAND_ONDIEECC - if (enable_hw_ecc) { - retval = spinand_disable_ecc(spi_nand); - if (retval < 0) { - dev_err(&spi_nand->dev, "disable ecc failed!!\n"); - return retval; - } - enable_hw_ecc = 0; - } -#endif - - return 0; -} - -/** - * spinand_erase_block_erase - erase a page - * @block_id: the physical block location to erase. - * - * Description: - * The command used here is 0xd8--indicating an erase command to erase - * one block--64 pages - * Need to wait for tERS. - */ -static int spinand_erase_block_erase(struct spi_device *spi_nand, u16 block_id) -{ - struct spinand_cmd cmd = {0}; - u16 row; - - row = block_id; - cmd.cmd = CMD_ERASE_BLK; - cmd.n_addr = 3; - cmd.addr[0] = (u8)((row & 0xff0000) >> 16); - cmd.addr[1] = (u8)((row & 0xff00) >> 8); - cmd.addr[2] = (u8)(row & 0x00ff); - - return spinand_cmd(spi_nand, &cmd); -} - -/** - * spinand_erase_block - erase a page - * @block_id: the physical block location to erase. - * - * Description: - * The commands used here are 0x06 and 0xd8--indicating an erase - * command to erase one block--64 pages - * It will first to enable the write enable bit (0x06 command), - * and then send the 0xd8 erase command - * Poll to wait for the tERS time to complete the tranaction. - */ -static int spinand_erase_block(struct spi_device *spi_nand, u16 block_id) -{ - int retval; - u8 status = 0; - - retval = spinand_write_enable(spi_nand); - if (wait_till_ready(spi_nand)) - dev_err(&spi_nand->dev, "wait timedout!!!\n"); - - retval = spinand_erase_block_erase(spi_nand, block_id); - while (1) { - retval = spinand_read_status(spi_nand, &status); - if (retval < 0) { - dev_err(&spi_nand->dev, - "error %d reading status register\n", retval); - return retval; - } - - if ((status & STATUS_OIP_MASK) == STATUS_READY) { - if ((status & STATUS_E_FAIL_MASK) == STATUS_E_FAIL) { - dev_err(&spi_nand->dev, - "erase error, block %d\n", block_id); - return -1; - } - break; - } - } - return 0; -} - -#ifdef CONFIG_MTD_SPINAND_ONDIEECC -static int spinand_write_page_hwecc(struct nand_chip *chip, - const u8 *buf, int oob_required, - int page) -{ - const u8 *p = buf; - int eccsize = chip->ecc.size; - int eccsteps = chip->ecc.steps; - - enable_hw_ecc = 1; - return nand_prog_page_op(chip, page, 0, p, eccsize * eccsteps); -} - -static int spinand_read_page_hwecc(struct nand_chip *chip, u8 *buf, - int oob_required, int page) -{ - int retval; - u8 status; - u8 *p = buf; - int eccsize = chip->ecc.size; - int eccsteps = chip->ecc.steps; - struct mtd_info *mtd = nand_to_mtd(chip); - struct spinand_info *info = nand_get_controller_data(chip); - - enable_read_hw_ecc = 1; - - nand_read_page_op(chip, page, 0, p, eccsize * eccsteps); - if (oob_required) - chip->legacy.read_buf(chip, chip->oob_poi, mtd->oobsize); - - while (1) { - retval = spinand_read_status(info->spi, &status); - if (retval < 0) { - dev_err(&mtd->dev, - "error %d reading status register\n", retval); - return retval; - } - - if ((status & STATUS_OIP_MASK) == STATUS_READY) { - if ((status & STATUS_ECC_MASK) == STATUS_ECC_ERROR) { - pr_info("spinand: ECC error\n"); - mtd->ecc_stats.failed++; - } else if ((status & STATUS_ECC_MASK) == - STATUS_ECC_1BIT_CORRECTED) - mtd->ecc_stats.corrected++; - break; - } - } - return 0; -} -#endif - -static void spinand_select_chip(struct nand_chip *chip, int dev) -{ -} - -static u8 spinand_read_byte(struct nand_chip *chip) -{ - struct spinand_state *state = mtd_to_state(nand_to_mtd(chip)); - u8 data; - - data = state->buf[state->buf_ptr]; - state->buf_ptr++; - return data; -} - -static int spinand_wait(struct nand_chip *chip) -{ - struct mtd_info *mtd = nand_to_mtd(chip); - struct spinand_info *info = nand_get_controller_data(chip); - - unsigned long timeo = jiffies; - int retval, state = chip->state; - u8 status; - - if (state == FL_ERASING) - timeo += (HZ * 400) / 1000; - else - timeo += (HZ * 20) / 1000; - - while (time_before(jiffies, timeo)) { - retval = spinand_read_status(info->spi, &status); - if (retval < 0) { - dev_err(&mtd->dev, - "error %d reading status register\n", retval); - return retval; - } - - if ((status & STATUS_OIP_MASK) == STATUS_READY) - return 0; - - cond_resched(); - } - return 0; -} - -static void spinand_write_buf(struct nand_chip *chip, const u8 *buf, int len) -{ - struct spinand_state *state = mtd_to_state(nand_to_mtd(chip)); - - memcpy(state->buf + state->buf_ptr, buf, len); - state->buf_ptr += len; -} - -static void spinand_read_buf(struct nand_chip *chip, u8 *buf, int len) -{ - struct spinand_state *state = mtd_to_state(nand_to_mtd(chip)); - - memcpy(buf, state->buf + state->buf_ptr, len); - state->buf_ptr += len; -} - -/* - * spinand_reset- send RESET command "0xff" to the Nand device. - */ -static void spinand_reset(struct spi_device *spi_nand) -{ - struct spinand_cmd cmd = {0}; - - cmd.cmd = CMD_RESET; - - if (spinand_cmd(spi_nand, &cmd) < 0) - pr_info("spinand reset failed!\n"); - - /* elapse 1ms before issuing any other command */ - usleep_range(1000, 2000); - - if (wait_till_ready(spi_nand)) - dev_err(&spi_nand->dev, "wait timedout!\n"); -} - -static void spinand_cmdfunc(struct nand_chip *chip, unsigned int command, - int column, int page) -{ - struct mtd_info *mtd = nand_to_mtd(chip); - struct spinand_info *info = nand_get_controller_data(chip); - struct spinand_state *state = info->priv; - - switch (command) { - /* - * READ0 - read in first 0x800 bytes - */ - case NAND_CMD_READ1: - case NAND_CMD_READ0: - state->buf_ptr = 0; - spinand_read_page(info->spi, page, 0x0, 0x840, state->buf); - break; - /* READOOB reads only the OOB because no ECC is performed. */ - case NAND_CMD_READOOB: - state->buf_ptr = 0; - spinand_read_page(info->spi, page, 0x800, 0x40, state->buf); - break; - case NAND_CMD_RNDOUT: - state->buf_ptr = column; - break; - case NAND_CMD_READID: - state->buf_ptr = 0; - spinand_read_id(info->spi, state->buf); - break; - case NAND_CMD_PARAM: - state->buf_ptr = 0; - break; - /* ERASE1 stores the block and page address */ - case NAND_CMD_ERASE1: - spinand_erase_block(info->spi, page); - break; - /* ERASE2 uses the block and page address from ERASE1 */ - case NAND_CMD_ERASE2: - break; - /* SEQIN sets up the addr buffer and all registers except the length */ - case NAND_CMD_SEQIN: - state->col = column; - state->row = page; - state->buf_ptr = 0; - break; - /* PAGEPROG reuses all of the setup from SEQIN and adds the length */ - case NAND_CMD_PAGEPROG: - spinand_program_page(info->spi, state->row, state->col, - state->buf_ptr, state->buf); - break; - case NAND_CMD_STATUS: - spinand_get_otp(info->spi, state->buf); - if (!(state->buf[0] & 0x80)) - state->buf[0] = 0x80; - state->buf_ptr = 0; - break; - /* RESET command */ - case NAND_CMD_RESET: - if (wait_till_ready(info->spi)) - dev_err(&info->spi->dev, "WAIT timedout!!!\n"); - /* a minimum of 250us must elapse before issuing RESET cmd*/ - usleep_range(250, 1000); - spinand_reset(info->spi); - break; - default: - dev_err(&mtd->dev, "Unknown CMD: 0x%x\n", command); - } -} - -/** - * spinand_lock_block - send write register 0x1f command to the Nand device - * - * Description: - * After power up, all the Nand blocks are locked. This function allows - * one to unlock the blocks, and so it can be written or erased. - */ -static int spinand_lock_block(struct spi_device *spi_nand, u8 lock) -{ - struct spinand_cmd cmd = {0}; - int ret; - u8 otp = 0; - - ret = spinand_get_otp(spi_nand, &otp); - - cmd.cmd = CMD_WRITE_REG; - cmd.n_addr = 1; - cmd.addr[0] = REG_BLOCK_LOCK; - cmd.n_tx = 1; - cmd.tx_buf = &lock; - - ret = spinand_cmd(spi_nand, &cmd); - if (ret < 0) - dev_err(&spi_nand->dev, "error %d lock block\n", ret); - - return ret; -} - -/** - * spinand_probe - [spinand Interface] - * @spi_nand: registered device driver. - * - * Description: - * Set up the device driver parameters to make the device available. - */ -static int spinand_probe(struct spi_device *spi_nand) -{ - struct mtd_info *mtd; - struct nand_chip *chip; - struct spinand_info *info; - struct spinand_state *state; - - info = devm_kzalloc(&spi_nand->dev, sizeof(struct spinand_info), - GFP_KERNEL); - if (!info) - return -ENOMEM; - - info->spi = spi_nand; - - spinand_lock_block(spi_nand, BL_ALL_UNLOCKED); - - state = devm_kzalloc(&spi_nand->dev, sizeof(struct spinand_state), - GFP_KERNEL); - if (!state) - return -ENOMEM; - - info->priv = state; - state->buf_ptr = 0; - state->buf = devm_kzalloc(&spi_nand->dev, BUFSIZE, GFP_KERNEL); - if (!state->buf) - return -ENOMEM; - - chip = devm_kzalloc(&spi_nand->dev, sizeof(struct nand_chip), - GFP_KERNEL); - if (!chip) - return -ENOMEM; - -#ifdef CONFIG_MTD_SPINAND_ONDIEECC - chip->ecc.mode = NAND_ECC_HW; - chip->ecc.size = 0x200; - chip->ecc.bytes = 0x6; - chip->ecc.steps = 0x4; - - chip->ecc.strength = 1; - chip->ecc.total = chip->ecc.steps * chip->ecc.bytes; - chip->ecc.read_page = spinand_read_page_hwecc; - chip->ecc.write_page = spinand_write_page_hwecc; -#else - chip->ecc.mode = NAND_ECC_SOFT; - chip->ecc.algo = NAND_ECC_HAMMING; - if (spinand_disable_ecc(spi_nand) < 0) - dev_info(&spi_nand->dev, "%s: disable ecc failed!\n", - __func__); -#endif - - nand_set_flash_node(chip, spi_nand->dev.of_node); - nand_set_controller_data(chip, info); - chip->legacy.read_buf = spinand_read_buf; - chip->legacy.write_buf = spinand_write_buf; - chip->legacy.read_byte = spinand_read_byte; - chip->legacy.cmdfunc = spinand_cmdfunc; - chip->legacy.waitfunc = spinand_wait; - chip->options |= NAND_CACHEPRG; - chip->select_chip = spinand_select_chip; - chip->legacy.set_features = nand_get_set_features_notsupp; - chip->legacy.get_features = nand_get_set_features_notsupp; - - mtd = nand_to_mtd(chip); - - dev_set_drvdata(&spi_nand->dev, mtd); - - mtd->dev.parent = &spi_nand->dev; - mtd->oobsize = 64; -#ifdef CONFIG_MTD_SPINAND_ONDIEECC - mtd_set_ooblayout(mtd, &spinand_oob_64_ops); -#endif - - if (nand_scan(chip, 1)) - return -ENXIO; - - return mtd_device_register(mtd, NULL, 0); -} - -/** - * spinand_remove - remove the device driver - * @spi: the spi device. - * - * Description: - * Remove the device driver parameters and free up allocated memories. - */ -static int spinand_remove(struct spi_device *spi) -{ - mtd_device_unregister(dev_get_drvdata(&spi->dev)); - - return 0; -} - -static const struct of_device_id spinand_dt[] = { - { .compatible = "spinand,mt29f", }, - {} -}; -MODULE_DEVICE_TABLE(of, spinand_dt); - -/* - * Device name structure description - */ -static struct spi_driver spinand_driver = { - .driver = { - .name = "mt29f", - .of_match_table = spinand_dt, - }, - .probe = spinand_probe, - .remove = spinand_remove, -}; - -module_spi_driver(spinand_driver); - -MODULE_DESCRIPTION("SPI NAND driver for Micron"); -MODULE_AUTHOR("Henry Pan , Kamlakant Patel "); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/staging/mt29f_spinand/mt29f_spinand.h b/drivers/staging/mt29f_spinand/mt29f_spinand.h deleted file mode 100644 index 457dc7ffdaf1..000000000000 --- a/drivers/staging/mt29f_spinand/mt29f_spinand.h +++ /dev/null @@ -1,106 +0,0 @@ -/*- - * Copyright 2013 Broadcom Corporation - * - * Copyright (c) 2009-2010 Micron Technology, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Henry Pan - * - * based on nand.h - */ -#ifndef __LINUX_MTD_SPI_NAND_H -#define __LINUX_MTD_SPI_NAND_H - -#include -#include -#include - -/* cmd */ -#define CMD_READ 0x13 -#define CMD_READ_RDM 0x03 -#define CMD_PROG_PAGE_CLRCACHE 0x02 -#define CMD_PROG_PAGE 0x84 -#define CMD_PROG_PAGE_EXC 0x10 -#define CMD_ERASE_BLK 0xd8 -#define CMD_WR_ENABLE 0x06 -#define CMD_WR_DISABLE 0x04 -#define CMD_READ_ID 0x9f -#define CMD_RESET 0xff -#define CMD_READ_REG 0x0f -#define CMD_WRITE_REG 0x1f - -/* feature/ status reg */ -#define REG_BLOCK_LOCK 0xa0 -#define REG_OTP 0xb0 -#define REG_STATUS 0xc0/* timing */ - -/* status */ -#define STATUS_OIP_MASK 0x01 -#define STATUS_READY 0 -#define STATUS_BUSY BIT(0) - -#define STATUS_E_FAIL_MASK 0x04 -#define STATUS_E_FAIL BIT(2) - -#define STATUS_P_FAIL_MASK 0x08 -#define STATUS_P_FAIL BIT(3) - -#define STATUS_ECC_MASK 0x30 -#define STATUS_ECC_1BIT_CORRECTED BIT(4) -#define STATUS_ECC_ERROR BIT(5) -#define STATUS_ECC_RESERVED (BIT(5) | BIT(4)) - -/*ECC enable defines*/ -#define OTP_ECC_MASK 0x10 -#define OTP_ECC_OFF 0 -#define OTP_ECC_ON 1 - -#define ECC_DISABLED -#define ECC_IN_NAND -#define ECC_SOFT - -/* block lock */ -#define BL_ALL_LOCKED 0x38 -#define BL_1_2_LOCKED 0x30 -#define BL_1_4_LOCKED 0x28 -#define BL_1_8_LOCKED 0x20 -#define BL_1_16_LOCKED 0x18 -#define BL_1_32_LOCKED 0x10 -#define BL_1_64_LOCKED 0x08 -#define BL_ALL_UNLOCKED 0 - -struct spinand_info { - struct spi_device *spi; - void *priv; -}; - -struct spinand_state { - u32 col; - u32 row; - int buf_ptr; - u8 *buf; -}; - -struct spinand_cmd { - u8 cmd; - u32 n_addr; /* Number of address */ - u8 addr[3]; /* Reg Offset */ - u32 n_dummy; /* Dummy use */ - u32 n_tx; /* Number of tx bytes */ - u8 *tx_buf; /* Tx buf */ - u32 n_rx; /* Number of rx bytes */ - u8 *rx_buf; /* Rx buf */ -}; - -int spinand_mtd(struct mtd_info *mtd); -void spinand_mtd_release(struct mtd_info *mtd); - -#endif /* __LINUX_MTD_SPI_NAND_H */