gpio: mcp23s08: move to pinctrl

This moves the mcp23s08 driver from gpio to pinctrl. Actual
pinctrl support for configuration of the pull-up resistors
follows in its own patch.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

arch/arm/configs/lpc32xx_defconfig

@@ -112,7 +112,7 @@ CONFIG_GPIO_SX150X=y
 CONFIG_GPIO_74X164=y
 CONFIG_GPIO_MAX7301=y
 CONFIG_GPIO_MC33880=y
-CONFIG_GPIO_MCP23S08=y
+CONFIG_PINCTRL_MCP23S08=y
 CONFIG_SENSORS_DS620=y
 CONFIG_SENSORS_MAX6639=y
 CONFIG_WATCHDOG=y

arch/blackfin/configs/BF609-EZKIT_defconfig

@@ -105,7 +105,7 @@ CONFIG_SPI=y
 CONFIG_SPI_ADI_V3=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_MCP23S08=y
+CONFIG_PINCTRL_MCP23S08=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_BFIN_WDT=y

arch/blackfin/mach-bf527/boards/tll6527m.c

@@ -348,7 +348,7 @@ static struct platform_device bfin_i2s = {
 };
 #endif
 
-#if IS_ENABLED(CONFIG_GPIO_MCP23S08)
+#if IS_ENABLED(CONFIG_PINCTRL_MCP23S08)
 #include <linux/spi/mcp23s08.h>
 static const struct mcp23s08_platform_data bfin_mcp23s08_sys_gpio_info = {
 	.chip[0].is_present = true,
@@ -423,7 +423,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_CPHA | SPI_CPOL,
 	},
 #endif
-#if IS_ENABLED(CONFIG_GPIO_MCP23S08)
+#if IS_ENABLED(CONFIG_PINCTRL_MCP23S08)
 	{
 		.modalias = "mcp23s08",
 		.platform_data = &bfin_mcp23s08_sys_gpio_info,

arch/blackfin/mach-bf609/boards/ezkit.c

@@ -1887,7 +1887,7 @@ static struct platform_device i2c_bfin_twi1_device = {
 };
 #endif
 
-#if IS_ENABLED(CONFIG_GPIO_MCP23S08)
+#if IS_ENABLED(CONFIG_PINCTRL_MCP23S08)
 #include <linux/spi/mcp23s08.h>
 static const struct mcp23s08_platform_data bfin_mcp23s08_soft_switch0 = {
 	.base = 120,
@@ -1929,7 +1929,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
 		I2C_BOARD_INFO("ssm2602", 0x1b),
 	},
 #endif
-#if IS_ENABLED(CONFIG_GPIO_MCP23S08)
+#if IS_ENABLED(CONFIG_PINCTRL_MCP23S08)
 	{
 		I2C_BOARD_INFO("mcp23017", 0x21),
 		.platform_data = (void *)&bfin_mcp23s08_soft_switch0

drivers/gpio/Kconfig

@@ -1227,23 +1227,6 @@ config GPIO_PISOSR
 
 endmenu
 
-menu "SPI or I2C GPIO expanders"
-	depends on (SPI_MASTER && !I2C) || I2C
-
-config GPIO_MCP23S08
-	tristate "Microchip MCP23xxx I/O expander"
-	depends on OF_GPIO
-	select GPIOLIB_IRQCHIP
-	select REGMAP_I2C if I2C
-	select REGMAP if SPI_MASTER
-	help
-	  SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017
-	  I/O expanders.
-	  This provides a GPIO interface supporting inputs and outputs.
-	  The I2C versions of the chips can be used as interrupt-controller.
-
-endmenu
-
 menu "USB GPIO expanders"
 	depends on USB
 

drivers/gpio/Makefile

@@ -77,7 +77,6 @@ obj-$(CONFIG_GPIO_MENZ127)	+= gpio-menz127.o
 obj-$(CONFIG_GPIO_MERRIFIELD)	+= gpio-merrifield.o
 obj-$(CONFIG_GPIO_MC33880)	+= gpio-mc33880.o
 obj-$(CONFIG_GPIO_MC9S08DZ60)	+= gpio-mc9s08dz60.o
-obj-$(CONFIG_GPIO_MCP23S08)	+= gpio-mcp23s08.o
 obj-$(CONFIG_GPIO_ML_IOH)	+= gpio-ml-ioh.o
 obj-$(CONFIG_GPIO_MM_LANTIQ)	+= gpio-mm-lantiq.o
 obj-$(CONFIG_GPIO_MOCKUP)      += gpio-mockup.o

drivers/pinctrl/Kconfig

@@ -146,6 +146,19 @@ config PINCTRL_FALCON
 	depends on SOC_FALCON
 	depends on PINCTRL_LANTIQ
 
+config PINCTRL_MCP23S08
+	tristate "Microchip MCP23xxx I/O expander"
+	depends on OF_GPIO
+	depends on SPI_MASTER || I2C
+	select GPIOLIB_IRQCHIP
+	select REGMAP_I2C if I2C
+	select REGMAP_SPI if SPI_MASTER
+	help
+	  SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017
+	  I/O expanders.
+	  This provides a GPIO interface supporting inputs and outputs.
+	  The I2C versions of the chips can be used as interrupt-controller.
+
 config PINCTRL_MESON
 	bool
 	depends on OF

drivers/pinctrl/Makefile

@@ -19,6 +19,7 @@ obj-$(CONFIG_PINCTRL_DA850_PUPD) += pinctrl-da850-pupd.o
 obj-$(CONFIG_PINCTRL_DIGICOLOR)	+= pinctrl-digicolor.o
 obj-$(CONFIG_PINCTRL_FALCON)	+= pinctrl-falcon.o
 obj-$(CONFIG_PINCTRL_MAX77620)	+= pinctrl-max77620.o
+obj-$(CONFIG_PINCTRL_MCP23S08)	+= pinctrl-mcp23s08.o
 obj-$(CONFIG_PINCTRL_MESON)	+= meson/
 obj-$(CONFIG_PINCTRL_OXNAS)	+= pinctrl-oxnas.o
 obj-$(CONFIG_PINCTRL_PALMAS)	+= pinctrl-palmas.o