OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Merge commit 'pm-fixes-for-3.3-rc3' into pm-qos 

New material in the pm-qos branch depends on recent power management
fixes.
This commit is contained in:
Rafael J. Wysocki 2012-02-13 16:20:07 +01:00
parent d031e1de2c d020283dc6
commit 654b0c9627
127 changed files with 952 additions and 3696 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
Documentation/pinctrl.txt
View File

@ -857,42 +857,41 @@ case), we define a mapping like this:
...
{
.name "2bit"
.name = "2bit"
.ctrl_dev_name = "pinctrl-foo",
.function = "mmc0",
.group = "mmc0_1_grp",
.dev_name = "foo-mmc.0",
},
{
.name "4bit"
.name = "4bit"
.ctrl_dev_name = "pinctrl-foo",
.function = "mmc0",
.group = "mmc0_1_grp",
.dev_name = "foo-mmc.0",
},
{
.name "4bit"
.name = "4bit"
.ctrl_dev_name = "pinctrl-foo",
.function = "mmc0",
.group = "mmc0_2_grp",
.dev_name = "foo-mmc.0",
},
{
.name "8bit"
.name = "8bit"
.ctrl_dev_name = "pinctrl-foo",
.function = "mmc0",
.group = "mmc0_1_grp",
.dev_name = "foo-mmc.0",
},
{
.name "8bit"
.name = "8bit"
.ctrl_dev_name = "pinctrl-foo",
.function = "mmc0",
.group = "mmc0_2_grp",
.dev_name = "foo-mmc.0",
},
{
.name "8bit"
.name = "8bit"
.ctrl_dev_name = "pinctrl-foo",
.function = "mmc0",
.group = "mmc0_3_grp",
@ -995,7 +994,7 @@ This is enabled by simply setting the .hog_on_boot field in the map to true,
like this:
{
.name "POWERMAP"
.name = "POWERMAP"
.ctrl_dev_name = "pinctrl-foo",
.function = "power_func",
.hog_on_boot = true,
@ -1025,7 +1024,7 @@ it, disables and releases it, and muxes it in on the pins defined by group B:
foo_switch()
{
struct pinmux pmx;
struct pinmux *pmx;
/* Enable on position A */
pmx = pinmux_get(&device, "spi0-pos-A");

11
MAINTAINERS
View File

@ -4140,6 +4140,7 @@ F: fs/partitions/ldm.*
LogFS
M: Joern Engel <joern@logfs.org>
M: Prasad Joshi <prasadjoshi.linux@gmail.com>
L: logfs@logfs.org
W: logfs.org
S: Maintained
@ -4281,13 +4282,6 @@ S: Orphan
F: drivers/video/matrox/matroxfb_*
F: include/linux/matroxfb.h
MAX1668 TEMPERATURE SENSOR DRIVER
M: "David George" <david.george@ska.ac.za>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/max1668
F: drivers/hwmon/max1668.c
MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER
M: "Hans J. Koch" <hjk@hansjkoch.de>
L: lm-sensors@lm-sensors.org
@ -6678,7 +6672,7 @@ TTY LAYER
M: Greg Kroah-Hartman <gregkh@suse.de>
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git
F: drivers/tty/*
F: drivers/tty/
F: drivers/tty/serial/serial_core.c
F: include/linux/serial_core.h
F: include/linux/serial.h
@ -7371,6 +7365,7 @@ S: Supported
F: Documentation/hwmon/wm83??
F: arch/arm/mach-s3c64xx/mach-crag6410*
F: drivers/leds/leds-wm83*.c
F: drivers/hwmon/wm83??-hwmon.c
F: drivers/input/misc/wm831x-on.c
F: drivers/input/touchscreen/wm831x-ts.c
F: drivers/input/touchscreen/wm97*.c

2
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 3
SUBLEVEL = 0
EXTRAVERSION = -rc1
EXTRAVERSION = -rc2
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*

1
arch/microblaze/Kconfig
View File

@ -19,6 +19,7 @@ config MICROBLAZE
select GENERIC_IRQ_SHOW
select GENERIC_PCI_IOMAP
select GENERIC_CPU_DEVICES
select GENERIC_ATOMIC64
config SWAP
def_bool n

1
arch/microblaze/include/asm/atomic.h
View File

@ -2,6 +2,7 @@
#define _ASM_MICROBLAZE_ATOMIC_H
#include <asm-generic/atomic.h>
#include <asm-generic/atomic64.h>
/*
* Atomically test *v and decrement if it is greater than 0.

1
arch/s390/Makefile
View File

@ -88,7 +88,6 @@ KBUILD_CFLAGS += -pipe -fno-strength-reduce -Wno-sign-compare
KBUILD_AFLAGS += $(aflags-y)
OBJCOPYFLAGS := -O binary
LDFLAGS_vmlinux := -e start
head-y := arch/s390/kernel/head.o
head-y += arch/s390/kernel/$(if $(CONFIG_64BIT),head64.o,head31.o)

4
arch/s390/kernel/vmlinux.lds.S
View File

@ -9,12 +9,12 @@
#ifndef CONFIG_64BIT
OUTPUT_FORMAT("elf32-s390", "elf32-s390", "elf32-s390")
OUTPUT_ARCH(s390)
ENTRY(_start)
ENTRY(startup)
jiffies = jiffies_64 + 4;
#else
OUTPUT_FORMAT("elf64-s390", "elf64-s390", "elf64-s390")
OUTPUT_ARCH(s390:64-bit)
ENTRY(_start)
ENTRY(startup)
jiffies = jiffies_64;
#endif

2
drivers/gpu/drm/drm_gem.c
View File

@ -140,7 +140,7 @@ int drm_gem_object_init(struct drm_device *dev,
obj->dev = dev;
obj->filp = shmem_file_setup("drm mm object", size, VM_NORESERVE);
if (IS_ERR(obj->filp))
return -ENOMEM;
return PTR_ERR(obj->filp);
kref_init(&obj->refcount);
atomic_set(&obj->handle_count, 0);

17
drivers/gpu/drm/i810/i810_dma.c
View File

@ -886,7 +886,7 @@ static int i810_flush_queue(struct drm_device *dev)
}
/* Must be called with the lock held */
void i810_driver_reclaim_buffers(struct drm_device *dev,
static void i810_reclaim_buffers(struct drm_device *dev,
struct drm_file *file_priv)
{
struct drm_device_dma *dma = dev->dma;
@ -1223,17 +1223,12 @@ void i810_driver_preclose(struct drm_device *dev, struct drm_file *file_priv)
if (dev_priv->page_flipping)
i810_do_cleanup_pageflip(dev);
}
}
if (file_priv->master && file_priv->master->lock.hw_lock) {
drm_idlelock_take(&file_priv->master->lock);
i810_driver_reclaim_buffers(dev, file_priv);
drm_idlelock_release(&file_priv->master->lock);
} else {
/* master disappeared, clean up stuff anyway and hope nothing
* goes wrong */
i810_driver_reclaim_buffers(dev, file_priv);
}
void i810_driver_reclaim_buffers_locked(struct drm_device *dev,
struct drm_file *file_priv)
{
i810_reclaim_buffers(dev, file_priv);
}
int i810_driver_dma_quiescent(struct drm_device *dev)

1
drivers/gpu/drm/i810/i810_drv.c
View File

@ -63,6 +63,7 @@ static struct drm_driver driver = {
.lastclose = i810_driver_lastclose,
.preclose = i810_driver_preclose,
.device_is_agp = i810_driver_device_is_agp,
.reclaim_buffers_locked = i810_driver_reclaim_buffers_locked,
.dma_quiescent = i810_driver_dma_quiescent,
.ioctls = i810_ioctls,
.fops = &i810_driver_fops,

6
drivers/gpu/drm/i810/i810_drv.h
View File

@ -116,12 +116,14 @@ typedef struct drm_i810_private {
/* i810_dma.c */
extern int i810_driver_dma_quiescent(struct drm_device *dev);
void i810_driver_reclaim_buffers(struct drm_device *dev,
struct drm_file *file_priv);
extern void i810_driver_reclaim_buffers_locked(struct drm_device *dev,
struct drm_file *file_priv);
extern int i810_driver_load(struct drm_device *, unsigned long flags);
extern void i810_driver_lastclose(struct drm_device *dev);
extern void i810_driver_preclose(struct drm_device *dev,
struct drm_file *file_priv);
extern void i810_driver_reclaim_buffers_locked(struct drm_device *dev,
struct drm_file *file_priv);
extern int i810_driver_device_is_agp(struct drm_device *dev);
extern long i810_ioctl(struct file *file, unsigned int cmd, unsigned long arg);

1
drivers/gpu/drm/radeon/radeon_i2c.c
View File

@ -897,6 +897,7 @@ struct radeon_i2c_chan *radeon_i2c_create(struct drm_device *dev,
i2c->rec = *rec;
i2c->adapter.owner = THIS_MODULE;
i2c->adapter.class = I2C_CLASS_DDC;
i2c->adapter.dev.parent = &dev->pdev->dev;
i2c->dev = dev;
i2c_set_adapdata(&i2c->adapter, i2c);
if (rec->mm_i2c ||

2
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
View File

@ -378,7 +378,7 @@ int vmw_framebuffer_create_handle(struct drm_framebuffer *fb,
unsigned int *handle)
{
if (handle)
handle = 0;
*handle = 0;
return 0;
}

10
drivers/hwmon/f71805f.c
View File

@ -283,11 +283,11 @@ static inline long temp_from_reg(u8 reg)
static inline u8 temp_to_reg(long val)
{
if (val < 0)
val = 0;
else if (val > 1000 * 0xff)
val = 0xff;
return ((val + 500) / 1000);
if (val <= 0)
return 0;
if (val >= 1000 * 0xff)
return 0xff;
return (val + 500) / 1000;
}
/*

3
drivers/hwmon/sht15.c
View File

@ -883,7 +883,7 @@ static int sht15_invalidate_voltage(struct notifier_block *nb,
static int __devinit sht15_probe(struct platform_device *pdev)
{
int ret = 0;
int ret;
struct sht15_data *data = kzalloc(sizeof(*data), GFP_KERNEL);
u8 status = 0;
@ -901,6 +901,7 @@ static int __devinit sht15_probe(struct platform_device *pdev)
init_waitqueue_head(&data->wait_queue);
if (pdev->dev.platform_data == NULL) {
ret = -EINVAL;
dev_err(&pdev->dev, "no platform data supplied\n");
goto err_free_data;
}

6
drivers/hwmon/w83627ehf.c
View File

@ -1319,6 +1319,7 @@ store_pwm_mode(struct device *dev, struct device_attribute *attr,
{
struct w83627ehf_data *data = dev_get_drvdata(dev);
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
struct w83627ehf_sio_data *sio_data = dev->platform_data;
int nr = sensor_attr->index;
unsigned long val;
int err;
@ -1330,6 +1331,11 @@ store_pwm_mode(struct device *dev, struct device_attribute *attr,
if (val > 1)
return -EINVAL;
/* On NCT67766F, DC mode is only supported for pwm1 */
if (sio_data->kind == nct6776 && nr && val != 1)
return -EINVAL;
mutex_lock(&data->update_lock);
reg = w83627ehf_read_value(data, W83627EHF_REG_PWM_ENABLE[nr]);
data->pwm_mode[nr] = val;

4
drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c
View File

@ -972,11 +972,11 @@ void iwl_irq_tasklet(struct iwl_trans *trans)
}
#endif
spin_unlock_irqrestore(&trans->shrd->lock, flags);
/* saved interrupt in inta variable now we can reset trans_pcie->inta */
trans_pcie->inta = 0;
spin_unlock_irqrestore(&trans->shrd->lock, flags);
/* Now service all interrupt bits discovered above. */
if (inta & CSR_INT_BIT_HW_ERR) {
IWL_ERR(trans, "Hardware error detected. Restarting.\n");

2
drivers/net/xen-netfront.c
View File

@ -68,7 +68,7 @@ struct netfront_cb {
#define NET_TX_RING_SIZE __CONST_RING_SIZE(xen_netif_tx, PAGE_SIZE)
#define NET_RX_RING_SIZE __CONST_RING_SIZE(xen_netif_rx, PAGE_SIZE)
#define TX_MAX_TARGET min_t(int, NET_RX_RING_SIZE, 256)
#define TX_MAX_TARGET min_t(int, NET_TX_RING_SIZE, 256)
struct netfront_stats {
u64 rx_packets;

54
drivers/pinctrl/core.c
View File

@ -510,10 +510,12 @@ static struct dentry *debugfs_root;
static void pinctrl_init_device_debugfs(struct pinctrl_dev *pctldev)
{
static struct dentry *device_root;
struct dentry *device_root;
device_root = debugfs_create_dir(dev_name(pctldev->dev),
debugfs_root);
pctldev->device_root = device_root;
if (IS_ERR(device_root) || !device_root) {
pr_warn("failed to create debugfs directory for %s\n",
dev_name(pctldev->dev));
@ -529,6 +531,11 @@ static void pinctrl_init_device_debugfs(struct pinctrl_dev *pctldev)
pinconf_init_device_debugfs(device_root, pctldev);
}
static void pinctrl_remove_device_debugfs(struct pinctrl_dev *pctldev)
{
debugfs_remove_recursive(pctldev->device_root);
}
static void pinctrl_init_debugfs(void)
{
debugfs_root = debugfs_create_dir("pinctrl", NULL);
@ -553,6 +560,10 @@ static void pinctrl_init_debugfs(void)
{
}
static void pinctrl_remove_device_debugfs(struct pinctrl_dev *pctldev)
{
}
#endif
/**
@ -572,26 +583,6 @@ struct pinctrl_dev *pinctrl_register(struct pinctrl_desc *pctldesc,
if (pctldesc->name == NULL)
return NULL;
/* If we're implementing pinmuxing, check the ops for sanity */
if (pctldesc->pmxops) {
ret = pinmux_check_ops(pctldesc->pmxops);
if (ret) {
pr_err("%s pinmux ops lacks necessary functions\n",
pctldesc->name);
return NULL;
}
}
/* If we're implementing pinconfig, check the ops for sanity */
if (pctldesc->confops) {
ret = pinconf_check_ops(pctldesc->confops);
if (ret) {
pr_err("%s pin config ops lacks necessary functions\n",
pctldesc->name);
return NULL;
}
}
pctldev = kzalloc(sizeof(struct pinctrl_dev), GFP_KERNEL);
if (pctldev == NULL)
return NULL;
@ -606,6 +597,26 @@ struct pinctrl_dev *pinctrl_register(struct pinctrl_desc *pctldesc,
mutex_init(&pctldev->gpio_ranges_lock);
pctldev->dev = dev;
/* If we're implementing pinmuxing, check the ops for sanity */
if (pctldesc->pmxops) {
ret = pinmux_check_ops(pctldev);
if (ret) {
pr_err("%s pinmux ops lacks necessary functions\n",
pctldesc->name);
goto out_err;
}
}
/* If we're implementing pinconfig, check the ops for sanity */
if (pctldesc->confops) {
ret = pinconf_check_ops(pctldev);
if (ret) {
pr_err("%s pin config ops lacks necessary functions\n",
pctldesc->name);
goto out_err;
}
}
/* Register all the pins */
pr_debug("try to register %d pins on %s...\n",
pctldesc->npins, pctldesc->name);
@ -641,6 +652,7 @@ void pinctrl_unregister(struct pinctrl_dev *pctldev)
if (pctldev == NULL)
return;
pinctrl_remove_device_debugfs(pctldev);
pinmux_unhog_maps(pctldev);
/* TODO: check that no pinmuxes are still active? */
mutex_lock(&pinctrldev_list_mutex);

3
drivers/pinctrl/core.h
View File

@ -41,6 +41,9 @@ struct pinctrl_dev {
struct device *dev;
struct module *owner;
void *driver_data;
#ifdef CONFIG_DEBUG_FS
struct dentry *device_root;
#endif
#ifdef CONFIG_PINMUX
struct mutex pinmux_hogs_lock;
struct list_head pinmux_hogs;

6
drivers/pinctrl/pinconf.c
View File

@ -205,8 +205,10 @@ int pin_config_group_set(const char *dev_name, const char *pin_group,
}
EXPORT_SYMBOL(pin_config_group_set);
int pinconf_check_ops(const struct pinconf_ops *ops)
int pinconf_check_ops(struct pinctrl_dev *pctldev)
{
const struct pinconf_ops *ops = pctldev->desc->confops;
/* We must be able to read out pin status */
if (!ops->pin_config_get && !ops->pin_config_group_get)
return -EINVAL;
@ -236,7 +238,7 @@ static int pinconf_pins_show(struct seq_file *s, void *what)
seq_puts(s, "Format: pin (name): pinmux setting array\n");
/* The pin number can be retrived from the pin controller descriptor */
for (i = 0; pin < pctldev->desc->npins; i++) {
for (i = 0; i < pctldev->desc->npins; i++) {
struct pin_desc *desc;
pin = pctldev->desc->pins[i].number;

4
drivers/pinctrl/pinconf.h
View File

@ -13,7 +13,7 @@
#ifdef CONFIG_PINCONF
int pinconf_check_ops(const struct pinconf_ops *ops);
int pinconf_check_ops(struct pinctrl_dev *pctldev);
void pinconf_init_device_debugfs(struct dentry *devroot,
struct pinctrl_dev *pctldev);
int pin_config_get_for_pin(struct pinctrl_dev *pctldev, unsigned pin,
@ -23,7 +23,7 @@ int pin_config_set_for_pin(struct pinctrl_dev *pctldev, unsigned pin,
#else
static inline int pinconf_check_ops(const struct pinconf_ops *ops)
static inline int pinconf_check_ops(struct pinctrl_dev *pctldev)
{
return 0;
}

81
drivers/pinctrl/pinmux.c
View File

@ -53,11 +53,6 @@ struct pinmux_group {
* @dev: the device using this pinmux
* @usecount: the number of active users of this mux setting, used to keep
* track of nested use cases
* @pins: an array of discrete physical pins used in this mapping, taken
* from the global pin enumeration space (copied from pinmux map)
* @num_pins: the number of pins in this mapping array, i.e. the number of
* elements in .pins so we can iterate over that array (copied from
* pinmux map)
* @pctldev: pin control device handling this pinmux
* @func_selector: the function selector for the pinmux device handling
* this pinmux
@ -152,8 +147,7 @@ static int pin_request(struct pinctrl_dev *pctldev,
status = 0;
if (status)
dev_err(pctldev->dev, "->request on device %s failed "
"for pin %d\n",
dev_err(pctldev->dev, "->request on device %s failed for pin %d\n",
pctldev->desc->name, pin);
out_free_pin:
if (status) {
@ -355,21 +349,20 @@ int __init pinmux_register_mappings(struct pinmux_map const *maps,
/* First sanity check the new mapping */
for (i = 0; i < num_maps; i++) {
if (!maps[i].name) {
pr_err("failed to register map %d: "
"no map name given\n", i);
pr_err("failed to register map %d: no map name given\n",
i);
return -EINVAL;
}
if (!maps[i].ctrl_dev && !maps[i].ctrl_dev_name) {
pr_err("failed to register map %s (%d): "
"no pin control device given\n",
pr_err("failed to register map %s (%d): no pin control device given\n",
maps[i].name, i);
return -EINVAL;
}
if (!maps[i].function) {
pr_err("failed to register map %s (%d): "
"no function ID given\n", maps[i].name, i);
pr_err("failed to register map %s (%d): no function ID given\n",
maps[i].name, i);
return -EINVAL;
}
@ -411,7 +404,7 @@ int __init pinmux_register_mappings(struct pinmux_map const *maps,
}
/**
* acquire_pins() - acquire all the pins for a certain funcion on a pinmux
* acquire_pins() - acquire all the pins for a certain function on a pinmux
* @pctldev: the device to take the pins on
* @func_selector: the function selector to acquire the pins for
* @group_selector: the group selector containing the pins to acquire
@ -442,8 +435,7 @@ static int acquire_pins(struct pinctrl_dev *pctldev,
ret = pin_request(pctldev, pins[i], func, NULL);
if (ret) {
dev_err(pctldev->dev,
"could not get pin %d for function %s "
"on device %s - conflicting mux mappings?\n",
"could not get pin %d for function %s on device %s - conflicting mux mappings?\n",
pins[i], func ? : "(undefined)",
pinctrl_dev_get_name(pctldev));
/* On error release all taken pins */
@ -458,7 +450,7 @@ static int acquire_pins(struct pinctrl_dev *pctldev,
/**
* release_pins() - release pins taken by earlier acquirement
* @pctldev: the device to free the pinx on
* @pctldev: the device to free the pins on
* @group_selector: the group selector containing the pins to free
*/
static void release_pins(struct pinctrl_dev *pctldev,
@ -473,8 +465,7 @@ static void release_pins(struct pinctrl_dev *pctldev,
ret = pctlops->get_group_pins(pctldev, group_selector,
&pins, &num_pins);
if (ret) {
dev_err(pctldev->dev, "could not get pins to release for "
"group selector %d\n",
dev_err(pctldev->dev, "could not get pins to release for group selector %d\n",
group_selector);
return;
}
@ -526,8 +517,7 @@ static int pinmux_check_pin_group(struct pinctrl_dev *pctldev,
ret = pinctrl_get_group_selector(pctldev, groups[0]);
if (ret < 0) {
dev_err(pctldev->dev,
"function %s wants group %s but the pin "
"controller does not seem to have that group\n",
"function %s wants group %s but the pin controller does not seem to have that group\n",
pmxops->get_function_name(pctldev, func_selector),
groups[0]);
return ret;
@ -535,8 +525,7 @@ static int pinmux_check_pin_group(struct pinctrl_dev *pctldev,
if (num_groups > 1)
dev_dbg(pctldev->dev,
"function %s support more than one group, "
"default-selecting first group %s (%d)\n",
"function %s support more than one group, default-selecting first group %s (%d)\n",
pmxops->get_function_name(pctldev, func_selector),
groups[0],
ret);
@ -628,10 +617,8 @@ static int pinmux_enable_muxmap(struct pinctrl_dev *pctldev,
if (pmx->pctldev && pmx->pctldev != pctldev) {
dev_err(pctldev->dev,
"different pin control devices given for device %s, "
"function %s\n",
devname,
map->function);
"different pin control devices given for device %s, function %s\n",
devname, map->function);
return -EINVAL;
}
pmx->dev = dev;
@ -695,7 +682,6 @@ static void pinmux_free_groups(struct pinmux *pmx)
*/
struct pinmux *pinmux_get(struct device *dev, const char *name)
{
struct pinmux_map const *map = NULL;
struct pinctrl_dev *pctldev = NULL;
const char *devname = NULL;
@ -745,8 +731,7 @@ struct pinmux *pinmux_get(struct device *dev, const char *name)
else if (map->ctrl_dev_name)
devname = map->ctrl_dev_name;
pr_warning("could not find a pinctrl device for pinmux "
"function %s, fishy, they shall all have one\n",
pr_warning("could not find a pinctrl device for pinmux function %s, fishy, they shall all have one\n",
map->function);
pr_warning("given pinctrl device name: %s",
devname ? devname : "UNDEFINED");
@ -904,8 +889,11 @@ void pinmux_disable(struct pinmux *pmx)
}
EXPORT_SYMBOL_GPL(pinmux_disable);
int pinmux_check_ops(const struct pinmux_ops *ops)
int pinmux_check_ops(struct pinctrl_dev *pctldev)
{
const struct pinmux_ops *ops = pctldev->desc->pmxops;
unsigned selector = 0;
/* Check that we implement required operations */
if (!ops->list_functions ||
!ops->get_function_name ||
@ -914,6 +902,18 @@ int pinmux_check_ops(const struct pinmux_ops *ops)
!ops->disable)
return -EINVAL;
/* Check that all functions registered have names */
while (ops->list_functions(pctldev, selector) >= 0) {
const char *fname = ops->get_function_name(pctldev,
selector);
if (!fname) {
pr_err("pinmux ops has no name for function%u\n",
selector);
return -EINVAL;
}
selector++;
}
return 0;
}
@ -932,8 +932,8 @@ static int pinmux_hog_map(struct pinctrl_dev *pctldev,
* without any problems, so then we can hog pinmuxes for
* all devices that just want a static pin mux at this point.
*/
dev_err(pctldev->dev, "map %s wants to hog a non-system "
"pinmux, this is not going to work\n", map->name);
dev_err(pctldev->dev, "map %s wants to hog a non-system pinmux, this is not going to work\n",
map->name);
return -EINVAL;
}
@ -993,9 +993,12 @@ int pinmux_hog_maps(struct pinctrl_dev *pctldev)
for (i = 0; i < pinmux_maps_num; i++) {
struct pinmux_map const *map = &pinmux_maps[i];
if (((map->ctrl_dev == dev) ||
!strcmp(map->ctrl_dev_name, devname)) &&
map->hog_on_boot) {
if (!map->hog_on_boot)
continue;
if ((map->ctrl_dev == dev) ||
(map->ctrl_dev_name &&
!strcmp(map->ctrl_dev_name, devname))) {
/* OK time to hog! */
ret = pinmux_hog_map(pctldev, map);
if (ret)
@ -1122,13 +1125,15 @@ static int pinmux_show(struct seq_file *s, void *what)
seq_printf(s, "device: %s function: %s (%u),",
pinctrl_dev_get_name(pmx->pctldev),
pmxops->get_function_name(pctldev, pmx->func_selector),
pmxops->get_function_name(pctldev,
pmx->func_selector),
pmx->func_selector);
seq_printf(s, " groups: [");
list_for_each_entry(grp, &pmx->groups, node) {
seq_printf(s, " %s (%u)",
pctlops->get_group_name(pctldev, grp->group_selector),
pctlops->get_group_name(pctldev,
grp->group_selector),
grp->group_selector);
}
seq_printf(s, " ]");

4
drivers/pinctrl/pinmux.h
View File

@ -12,7 +12,7 @@
*/
#ifdef CONFIG_PINMUX
int pinmux_check_ops(const struct pinmux_ops *ops);
int pinmux_check_ops(struct pinctrl_dev *pctldev);
void pinmux_init_device_debugfs(struct dentry *devroot,
struct pinctrl_dev *pctldev);
void pinmux_init_debugfs(struct dentry *subsys_root);
@ -21,7 +21,7 @@ void pinmux_unhog_maps(struct pinctrl_dev *pctldev);
#else
static inline int pinmux_check_ops(const struct pinmux_ops *ops)
static inline int pinmux_check_ops(struct pinctrl_dev *pctldev)
{
return 0;
}

2
drivers/regulator/of_regulator.c
View File

@ -35,7 +35,7 @@ static void of_get_regulation_constraints(struct device_node *np,
if (constraints->min_uV != constraints->max_uV)
constraints->valid_ops_mask |= REGULATOR_CHANGE_VOLTAGE;
/* Only one voltage? Then make sure it's set. */
if (constraints->min_uV == constraints->max_uV)
if (min_uV && max_uV && constraints->min_uV == constraints->max_uV)
constraints->apply_uV = true;
uV_offset = of_get_property(np, "regulator-microvolt-offset", NULL);

6
drivers/s390/block/dasd.c
View File

@ -3261,6 +3261,12 @@ void dasd_generic_path_event(struct ccw_device *cdev, int *path_event)
device->path_data.tbvpm |= eventlpm;
dasd_schedule_device_bh(device);
}
if (path_event[chp] & PE_PATHGROUP_ESTABLISHED) {
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"Pathgroup re-established\n");
if (device->discipline->kick_validate)
device->discipline->kick_validate(device);
}
}
dasd_put_device(device);
}

64
drivers/s390/block/dasd_alias.c
View File

@ -189,14 +189,12 @@ int dasd_alias_make_device_known_to_lcu(struct dasd_device *device)
unsigned long flags;
struct alias_server *server, *newserver;
struct alias_lcu *lcu, *newlcu;
int is_lcu_known;
struct dasd_uid uid;
private = (struct dasd_eckd_private *) device->private;
device->discipline->get_uid(device, &uid);
spin_lock_irqsave(&aliastree.lock, flags);
is_lcu_known = 1;
server = _find_server(&uid);
if (!server) {
spin_unlock_irqrestore(&aliastree.lock, flags);
@ -208,7 +206,6 @@ int dasd_alias_make_device_known_to_lcu(struct dasd_device *device)
if (!server) {
list_add(&newserver->server, &aliastree.serverlist);
server = newserver;
is_lcu_known = 0;
} else {
/* someone was faster */
_free_server(newserver);
@ -226,12 +223,10 @@ int dasd_alias_make_device_known_to_lcu(struct dasd_device *device)
if (!lcu) {
list_add(&newlcu->lcu, &server->lculist);
lcu = newlcu;
is_lcu_known = 0;
} else {
/* someone was faster */
_free_lcu(newlcu);
}
is_lcu_known = 0;
}
spin_lock(&lcu->lock);
list_add(&device->alias_list, &lcu->inactive_devices);
@ -239,64 +234,7 @@ int dasd_alias_make_device_known_to_lcu(struct dasd_device *device)
spin_unlock(&lcu->lock);
spin_unlock_irqrestore(&aliastree.lock, flags);
return is_lcu_known;
}
/*
* The first device to be registered on an LCU will have to do
* some additional setup steps to configure that LCU on the
* storage server. All further devices should wait with their
* initialization until the first device is done.
* To synchronize this work, the first device will call
* dasd_alias_lcu_setup_complete when it is done, and all
* other devices will wait for it with dasd_alias_wait_for_lcu_setup.
*/
void dasd_alias_lcu_setup_complete(struct dasd_device *device)
{
unsigned long flags;
struct alias_server *server;
struct alias_lcu *lcu;
struct dasd_uid uid;
device->discipline->get_uid(device, &uid);
lcu = NULL;
spin_lock_irqsave(&aliastree.lock, flags);
server = _find_server(&uid);
if (server)
lcu = _find_lcu(server, &uid);
spin_unlock_irqrestore(&aliastree.lock, flags);
if (!lcu) {
DBF_EVENT_DEVID(DBF_ERR, device->cdev,
"could not find lcu for %04x %02x",
uid.ssid, uid.real_unit_addr);
WARN_ON(1);
return;
}
complete_all(&lcu->lcu_setup);
}
void dasd_alias_wait_for_lcu_setup(struct dasd_device *device)
{
unsigned long flags;
struct alias_server *server;
struct alias_lcu *lcu;
struct dasd_uid uid;
device->discipline->get_uid(device, &uid);
lcu = NULL;
spin_lock_irqsave(&aliastree.lock, flags);
server = _find_server(&uid);
if (server)
lcu = _find_lcu(server, &uid);
spin_unlock_irqrestore(&aliastree.lock, flags);
if (!lcu) {
DBF_EVENT_DEVID(DBF_ERR, device->cdev,
"could not find lcu for %04x %02x",
uid.ssid, uid.real_unit_addr);
WARN_ON(1);
return;
}
wait_for_completion(&lcu->lcu_setup);
return 0;
}
/*

63
drivers/s390/block/dasd_eckd.c
View File

@ -1534,6 +1534,10 @@ static void dasd_eckd_validate_server(struct dasd_device *device)
struct dasd_eckd_private *private;
int enable_pav;
private = (struct dasd_eckd_private *) device->private;
if (private->uid.type == UA_BASE_PAV_ALIAS ||
private->uid.type == UA_HYPER_PAV_ALIAS)
return;
if (dasd_nopav || MACHINE_IS_VM)
enable_pav = 0;
else
@ -1542,11 +1546,28 @@ static void dasd_eckd_validate_server(struct dasd_device *device)
/* may be requested feature is not available on server,
* therefore just report error and go ahead */
private = (struct dasd_eckd_private *) device->private;
DBF_EVENT_DEVID(DBF_WARNING, device->cdev, "PSF-SSC for SSID %04x "
"returned rc=%d", private->uid.ssid, rc);
}
/*
* worker to do a validate server in case of a lost pathgroup
*/
static void dasd_eckd_do_validate_server(struct work_struct *work)
{
struct dasd_device *device = container_of(work, struct dasd_device,
kick_validate);
dasd_eckd_validate_server(device);
dasd_put_device(device);
}
static void dasd_eckd_kick_validate_server(struct dasd_device *device)
{
dasd_get_device(device);
/* queue call to do_validate_server to the kernel event daemon. */
schedule_work(&device->kick_validate);
}
static u32 get_fcx_max_data(struct dasd_device *device)
{
#if defined(CONFIG_64BIT)
@ -1588,10 +1609,13 @@ dasd_eckd_check_characteristics(struct dasd_device *device)
struct dasd_eckd_private *private;
struct dasd_block *block;
struct dasd_uid temp_uid;
int is_known, rc, i;
int rc, i;
int readonly;
unsigned long value;
/* setup work queue for validate server*/
INIT_WORK(&device->kick_validate, dasd_eckd_do_validate_server);
if (!ccw_device_is_pathgroup(device->cdev)) {
dev_warn(&device->cdev->dev,
"A channel path group could not be established\n");
@ -1651,22 +1675,12 @@ dasd_eckd_check_characteristics(struct dasd_device *device)
block->base = device;
}
/* register lcu with alias handling, enable PAV if this is a new lcu */
is_known = dasd_alias_make_device_known_to_lcu(device);
if (is_known < 0) {
rc = is_known;
/* register lcu with alias handling, enable PAV */
rc = dasd_alias_make_device_known_to_lcu(device);
if (rc)
goto out_err2;
}
/*
* dasd_eckd_validate_server is done on the first device that
* is found for an LCU. All later other devices have to wait
* for it, so they will read the correct feature codes.
*/
if (!is_known) {
dasd_eckd_validate_server(device);
dasd_alias_lcu_setup_complete(device);
} else
dasd_alias_wait_for_lcu_setup(device);
dasd_eckd_validate_server(device);
/* device may report different configuration data after LCU setup */
rc = dasd_eckd_read_conf(device);
@ -4098,7 +4112,7 @@ static int dasd_eckd_restore_device(struct dasd_device *device)
{
struct dasd_eckd_private *private;
struct dasd_eckd_characteristics temp_rdc_data;
int is_known, rc;
int rc;
struct dasd_uid temp_uid;
unsigned long flags;
@ -4121,14 +4135,10 @@ static int dasd_eckd_restore_device(struct dasd_device *device)
goto out_err;
/* register lcu with alias handling, enable PAV if this is a new lcu */
is_known = dasd_alias_make_device_known_to_lcu(device);
if (is_known < 0)
return is_known;
if (!is_known) {
dasd_eckd_validate_server(device);
dasd_alias_lcu_setup_complete(device);
} else
dasd_alias_wait_for_lcu_setup(device);
rc = dasd_alias_make_device_known_to_lcu(device);
if (rc)
return rc;
dasd_eckd_validate_server(device);
/* RE-Read Configuration Data */
rc = dasd_eckd_read_conf(device);
@ -4270,6 +4280,7 @@ static struct dasd_discipline dasd_eckd_discipline = {
.restore = dasd_eckd_restore_device,
.reload = dasd_eckd_reload_device,
.get_uid = dasd_eckd_get_uid,
.kick_validate = dasd_eckd_kick_validate_server,
};
static int __init

2
drivers/s390/block/dasd_int.h
View File

@ -355,6 +355,7 @@ struct dasd_discipline {
int (*reload) (struct dasd_device *);
int (*get_uid) (struct dasd_device *, struct dasd_uid *);
void (*kick_validate) (struct dasd_device *);
};
extern struct dasd_discipline *dasd_diag_discipline_pointer;
@ -455,6 +456,7 @@ struct dasd_device {
struct work_struct kick_work;
struct work_struct restore_device;
struct work_struct reload_device;
struct work_struct kick_validate;
struct timer_list timer;
debug_info_t *debug_area;

0
drivers/tty/serial/8250.c → drivers/tty/serial/8250/8250.c
View File

0
drivers/tty/serial/8250.h → drivers/tty/serial/8250/8250.h
View File

0
drivers/tty/serial/8250_accent.c → drivers/tty/serial/8250/8250_accent.c
View File

0
drivers/tty/serial/8250_acorn.c → drivers/tty/serial/8250/8250_acorn.c
View File

0
drivers/tty/serial/8250_boca.c → drivers/tty/serial/8250/8250_boca.c
View File

0
drivers/tty/serial/8250_dw.c → drivers/tty/serial/8250/8250_dw.c
View File

0
drivers/tty/serial/8250_early.c → drivers/tty/serial/8250/8250_early.c
View File

0
drivers/tty/serial/8250_exar_st16c554.c → drivers/tty/serial/8250/8250_exar_st16c554.c
View File

0
drivers/tty/serial/8250_fourport.c → drivers/tty/serial/8250/8250_fourport.c
View File

0
drivers/tty/serial/8250_fsl.c → drivers/tty/serial/8250/8250_fsl.c
View File

0
drivers/tty/serial/8250_gsc.c → drivers/tty/serial/8250/8250_gsc.c
View File

0
drivers/tty/serial/8250_hp300.c → drivers/tty/serial/8250/8250_hp300.c
View File

0
drivers/tty/serial/8250_hub6.c → drivers/tty/serial/8250/8250_hub6.c
View File

0
drivers/tty/serial/8250_mca.c → drivers/tty/serial/8250/8250_mca.c
View File

0
drivers/tty/serial/8250_pci.c → drivers/tty/serial/8250/8250_pci.c
View File

0
drivers/tty/serial/8250_pnp.c → drivers/tty/serial/8250/8250_pnp.c
View File

280
drivers/tty/serial/8250/Kconfig Normal file
View File

@ -0,0 +1,280 @@
#
# The 8250/16550 serial drivers. You shouldn't be in this list unless
# you somehow have an implicit or explicit dependency on SERIAL_8250.
#
config SERIAL_8250
tristate "8250/16550 and compatible serial support"
select SERIAL_CORE
---help---
This selects whether you want to include the driver for the standard
serial ports. The standard answer is Y. People who might say N
here are those that are setting up dedicated Ethernet WWW/FTP
servers, or users that have one of the various bus mice instead of a
serial mouse and don't intend to use their machine's standard serial
port for anything. (Note that the Cyclades and Stallion multi
serial port drivers do not need this driver built in for them to
work.)
To compile this driver as a module, choose M here: the
module will be called 8250.
[WARNING: Do not compile this driver as a module if you are using
non-standard serial ports, since the configuration information will
be lost when the driver is unloaded. This limitation may be lifted
in the future.]
BTW1: If you have a mouseman serial mouse which is not recognized by
the X window system, try running gpm first.
BTW2: If you intend to use a software modem (also called Winmodem)
under Linux, forget it. These modems are crippled and require
proprietary drivers which are only available under Windows.
Most people will say Y or M here, so that they can use serial mice,
modems and similar devices connecting to the standard serial ports.
config SERIAL_8250_CONSOLE
bool "Console on 8250/16550 and compatible serial port"
depends on SERIAL_8250=y
select SERIAL_CORE_CONSOLE
---help---
If you say Y here, it will be possible to use a serial port as the
system console (the system console is the device which receives all
kernel messages and warnings and which allows logins in single user
mode). This could be useful if some terminal or printer is connected
to that serial port.
Even if you say Y here, the currently visible virtual console
(/dev/tty0) will still be used as the system console by default, but
you can alter that using a kernel command line option such as
"console=ttyS1". (Try "man bootparam" or see the documentation of
your boot loader (grub or lilo or loadlin) about how to pass options
to the kernel at boot time.)
If you don't have a VGA card installed and you say Y here, the
kernel will automatically use the first serial line, /dev/ttyS0, as
system console.
You can set that using a kernel command line option such as
"console=uart8250,io,0x3f8,9600n8"
"console=uart8250,mmio,0xff5e0000,115200n8".
and it will switch to normal serial console when the corresponding
port is ready.
"earlycon=uart8250,io,0x3f8,9600n8"
"earlycon=uart8250,mmio,0xff5e0000,115200n8".
it will not only setup early console.
If unsure, say N.
config FIX_EARLYCON_MEM
bool
depends on X86
default y
config SERIAL_8250_GSC
tristate
depends on SERIAL_8250 && GSC
default SERIAL_8250
config SERIAL_8250_PCI
tristate "8250/16550 PCI device support" if EXPERT
depends on SERIAL_8250 && PCI
default SERIAL_8250
help
This builds standard PCI serial support. You may be able to
disable this feature if you only need legacy serial support.
Saves about 9K.
config SERIAL_8250_PNP
tristate "8250/16550 PNP device support" if EXPERT
depends on SERIAL_8250 && PNP
default SERIAL_8250
help
This builds standard PNP serial support. You may be able to
disable this feature if you only need legacy serial support.
config SERIAL_8250_HP300
tristate
depends on SERIAL_8250 && HP300
default SERIAL_8250
config SERIAL_8250_CS
tristate "8250/16550 PCMCIA device support"
depends on PCMCIA && SERIAL_8250
---help---
Say Y here to enable support for 16-bit PCMCIA serial devices,
including serial port cards, modems, and the modem functions of
multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are
credit-card size devices often used with laptops.)
To compile this driver as a module, choose M here: the
module will be called serial_cs.
If unsure, say N.
config SERIAL_8250_NR_UARTS
int "Maximum number of 8250/16550 serial ports"
depends on SERIAL_8250
default "4"
help
Set this to the number of serial ports you want the driver
to support. This includes any ports discovered via ACPI or
PCI enumeration and any ports that may be added at run-time
via hot-plug, or any ISA multi-port serial cards.
config SERIAL_8250_RUNTIME_UARTS
int "Number of 8250/16550 serial ports to register at runtime"
depends on SERIAL_8250
range 0 SERIAL_8250_NR_UARTS
default "4"
help
Set this to the maximum number of serial ports you want
the kernel to register at boot time. This can be overridden
with the module parameter "nr_uarts", or boot-time parameter
8250.nr_uarts
config SERIAL_8250_EXTENDED
bool "Extended 8250/16550 serial driver options"
depends on SERIAL_8250
help
If you wish to use any non-standard features of the standard "dumb"
driver, say Y here. This includes HUB6 support, shared serial
interrupts, special multiport support, support for more than the
four COM 1/2/3/4 boards, etc.
Note that the answer to this question won't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about serial driver options. If unsure, say N.
config SERIAL_8250_MANY_PORTS
bool "Support more than 4 legacy serial ports"
depends on SERIAL_8250_EXTENDED && !IA64
help
Say Y here if you have dumb serial boards other than the four
standard COM 1/2/3/4 ports. This may happen if you have an AST
FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available
from <http://www.tldp.org/docs.html#howto>), or other custom
serial port hardware which acts similar to standard serial port
hardware. If you only use the standard COM 1/2/3/4 ports, you can
say N here to save some memory. You can also say Y if you have an
"intelligent" multiport card such as Cyclades, Digiboards, etc.
#
# Multi-port serial cards
#
config SERIAL_8250_FOURPORT
tristate "Support Fourport cards"
depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
help
Say Y here if you have an AST FourPort serial board.
To compile this driver as a module, choose M here: the module
will be called 8250_fourport.
config SERIAL_8250_ACCENT
tristate "Support Accent cards"
depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
help
Say Y here if you have an Accent Async serial board.
To compile this driver as a module, choose M here: the module
will be called 8250_accent.
config SERIAL_8250_BOCA
tristate "Support Boca cards"
depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
help
Say Y here if you have a Boca serial board. Please read the Boca
mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>
To compile this driver as a module, choose M here: the module
will be called 8250_boca.
config SERIAL_8250_EXAR_ST16C554
tristate "Support Exar ST16C554/554D Quad UART"
depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
help
The Uplogix Envoy TU301 uses this Exar Quad UART. If you are
tinkering with your Envoy TU301, or have a machine with this UART,
say Y here.
To compile this driver as a module, choose M here: the module
will be called 8250_exar_st16c554.
config SERIAL_8250_HUB6
tristate "Support Hub6 cards"
depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
help
Say Y here if you have a HUB6 serial board.
To compile this driver as a module, choose M here: the module
will be called 8250_hub6.
#
# Misc. options/drivers.
#
config SERIAL_8250_SHARE_IRQ
bool "Support for sharing serial interrupts"
depends on SERIAL_8250_EXTENDED
help
Some serial boards have hardware support which allows multiple dumb
serial ports on the same board to share a single IRQ. To enable
support for this in the serial driver, say Y here.
config SERIAL_8250_DETECT_IRQ
bool "Autodetect IRQ on standard ports (unsafe)"
depends on SERIAL_8250_EXTENDED
help
Say Y here if you want the kernel to try to guess which IRQ
to use for your serial port.
This is considered unsafe; it is far better to configure the IRQ in
a boot script using the setserial command.
If unsure, say N.
config SERIAL_8250_RSA
bool "Support RSA serial ports"
depends on SERIAL_8250_EXTENDED
help
::: To be written :::
config SERIAL_8250_MCA
tristate "Support 8250-type ports on MCA buses"
depends on SERIAL_8250 != n && MCA
help
Say Y here if you have a MCA serial ports.
To compile this driver as a module, choose M here: the module
will be called 8250_mca.
config SERIAL_8250_ACORN
tristate "Acorn expansion card serial port support"
depends on ARCH_ACORN && SERIAL_8250
help
If you have an Atomwide Serial card or Serial Port card for an Acorn
system, say Y to this option. The driver can handle 1, 2, or 3 port
cards. If unsure, say N.
config SERIAL_8250_RM9K
bool "Support for MIPS RM9xxx integrated serial port"
depends on SERIAL_8250 != n && SERIAL_RM9000
select SERIAL_8250_SHARE_IRQ
help
Selecting this option will add support for the integrated serial
port hardware found on MIPS RM9122 and similar processors.
If unsure, say N.
config SERIAL_8250_FSL
bool
depends on SERIAL_8250_CONSOLE && PPC_UDBG_16550
default PPC
config SERIAL_8250_DW
tristate "Support for Synopsys DesignWare 8250 quirks"
depends on SERIAL_8250 && OF
help
Selecting this option will enable handling of the extra features
present in the Synopsys DesignWare APB UART.

20
drivers/tty/serial/8250/Makefile Normal file
View File

@ -0,0 +1,20 @@
#
# Makefile for the 8250 serial device drivers.
#
obj-$(CONFIG_SERIAL_8250) += 8250.o
obj-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o
obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o
obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o
obj-$(CONFIG_SERIAL_8250_HP300) += 8250_hp300.o
obj-$(CONFIG_SERIAL_8250_CS) += serial_cs.o
obj-$(CONFIG_SERIAL_8250_ACORN) += 8250_acorn.o
obj-$(CONFIG_SERIAL_8250_CONSOLE) += 8250_early.o
obj-$(CONFIG_SERIAL_8250_FOURPORT) += 8250_fourport.o
obj-$(CONFIG_SERIAL_8250_ACCENT) += 8250_accent.o
obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o
obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o
obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o
obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o

0
drivers/tty/serial/m32r_sio.c → drivers/tty/serial/8250/m32r_sio.c
View File

0
drivers/tty/serial/m32r_sio.h → drivers/tty/serial/8250/m32r_sio.h
View File

0
drivers/tty/serial/m32r_sio_reg.h → drivers/tty/serial/8250/m32r_sio_reg.h
View File

0
drivers/tty/serial/serial_cs.c → drivers/tty/serial/8250/serial_cs.c
View File

283
drivers/tty/serial/Kconfig
View File

@ -5,279 +5,7 @@
menu "Serial drivers"
depends on HAS_IOMEM
#
# The new 8250/16550 serial drivers
config SERIAL_8250
tristate "8250/16550 and compatible serial support"
select SERIAL_CORE
---help---
This selects whether you want to include the driver for the standard
serial ports. The standard answer is Y. People who might say N
here are those that are setting up dedicated Ethernet WWW/FTP
servers, or users that have one of the various bus mice instead of a
serial mouse and don't intend to use their machine's standard serial
port for anything. (Note that the Cyclades and Stallion multi
serial port drivers do not need this driver built in for them to
work.)
To compile this driver as a module, choose M here: the
module will be called 8250.
[WARNING: Do not compile this driver as a module if you are using
non-standard serial ports, since the configuration information will
be lost when the driver is unloaded. This limitation may be lifted
in the future.]
BTW1: If you have a mouseman serial mouse which is not recognized by
the X window system, try running gpm first.
BTW2: If you intend to use a software modem (also called Winmodem)
under Linux, forget it. These modems are crippled and require
proprietary drivers which are only available under Windows.
Most people will say Y or M here, so that they can use serial mice,
modems and similar devices connecting to the standard serial ports.
config SERIAL_8250_CONSOLE
bool "Console on 8250/16550 and compatible serial port"
depends on SERIAL_8250=y
select SERIAL_CORE_CONSOLE
---help---
If you say Y here, it will be possible to use a serial port as the
system console (the system console is the device which receives all
kernel messages and warnings and which allows logins in single user
mode). This could be useful if some terminal or printer is connected
to that serial port.
Even if you say Y here, the currently visible virtual console
(/dev/tty0) will still be used as the system console by default, but
you can alter that using a kernel command line option such as
"console=ttyS1". (Try "man bootparam" or see the documentation of
your boot loader (grub or lilo or loadlin) about how to pass options
to the kernel at boot time.)
If you don't have a VGA card installed and you say Y here, the
kernel will automatically use the first serial line, /dev/ttyS0, as
system console.
You can set that using a kernel command line option such as
"console=uart8250,io,0x3f8,9600n8"
"console=uart8250,mmio,0xff5e0000,115200n8".
and it will switch to normal serial console when the corresponding
port is ready.
"earlycon=uart8250,io,0x3f8,9600n8"
"earlycon=uart8250,mmio,0xff5e0000,115200n8".
it will not only setup early console.
If unsure, say N.
config FIX_EARLYCON_MEM
bool
depends on X86
default y
config SERIAL_8250_GSC
tristate
depends on SERIAL_8250 && GSC
default SERIAL_8250
config SERIAL_8250_PCI
tristate "8250/16550 PCI device support" if EXPERT
depends on SERIAL_8250 && PCI
default SERIAL_8250
help
This builds standard PCI serial support. You may be able to
disable this feature if you only need legacy serial support.
Saves about 9K.
config SERIAL_8250_PNP
tristate "8250/16550 PNP device support" if EXPERT
depends on SERIAL_8250 && PNP
default SERIAL_8250
help
This builds standard PNP serial support. You may be able to
disable this feature if you only need legacy serial support.
config SERIAL_8250_FSL
bool
depends on SERIAL_8250_CONSOLE && PPC_UDBG_16550
default PPC
config SERIAL_8250_HP300
tristate
depends on SERIAL_8250 && HP300
default SERIAL_8250
config SERIAL_8250_CS
tristate "8250/16550 PCMCIA device support"
depends on PCMCIA && SERIAL_8250
---help---
Say Y here to enable support for 16-bit PCMCIA serial devices,
including serial port cards, modems, and the modem functions of
multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are
credit-card size devices often used with laptops.)
To compile this driver as a module, choose M here: the
module will be called serial_cs.
If unsure, say N.
config SERIAL_8250_NR_UARTS
int "Maximum number of 8250/16550 serial ports"
depends on SERIAL_8250
default "4"
help
Set this to the number of serial ports you want the driver
to support. This includes any ports discovered via ACPI or
PCI enumeration and any ports that may be added at run-time
via hot-plug, or any ISA multi-port serial cards.
config SERIAL_8250_RUNTIME_UARTS
int "Number of 8250/16550 serial ports to register at runtime"
depends on SERIAL_8250
range 0 SERIAL_8250_NR_UARTS
default "4"
help
Set this to the maximum number of serial ports you want
the kernel to register at boot time. This can be overridden
with the module parameter "nr_uarts", or boot-time parameter
8250.nr_uarts
config SERIAL_8250_EXTENDED
bool "Extended 8250/16550 serial driver options"
depends on SERIAL_8250
help
If you wish to use any non-standard features of the standard "dumb"
driver, say Y here. This includes HUB6 support, shared serial
interrupts, special multiport support, support for more than the
four COM 1/2/3/4 boards, etc.
Note that the answer to this question won't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about serial driver options. If unsure, say N.
config SERIAL_8250_MANY_PORTS
bool "Support more than 4 legacy serial ports"
depends on SERIAL_8250_EXTENDED && !IA64
help
Say Y here if you have dumb serial boards other than the four
standard COM 1/2/3/4 ports. This may happen if you have an AST
FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available
from <http://www.tldp.org/docs.html#howto>), or other custom
serial port hardware which acts similar to standard serial port
hardware. If you only use the standard COM 1/2/3/4 ports, you can
say N here to save some memory. You can also say Y if you have an
"intelligent" multiport card such as Cyclades, Digiboards, etc.
#
# Multi-port serial cards
#
config SERIAL_8250_FOURPORT
tristate "Support Fourport cards"
depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
help
Say Y here if you have an AST FourPort serial board.
To compile this driver as a module, choose M here: the module
will be called 8250_fourport.
config SERIAL_8250_ACCENT
tristate "Support Accent cards"
depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
help
Say Y here if you have an Accent Async serial board.
To compile this driver as a module, choose M here: the module
will be called 8250_accent.
config SERIAL_8250_BOCA
tristate "Support Boca cards"
depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
help
Say Y here if you have a Boca serial board. Please read the Boca
mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>
To compile this driver as a module, choose M here: the module
will be called 8250_boca.
config SERIAL_8250_EXAR_ST16C554
tristate "Support Exar ST16C554/554D Quad UART"
depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
help
The Uplogix Envoy TU301 uses this Exar Quad UART. If you are
tinkering with your Envoy TU301, or have a machine with this UART,
say Y here.
To compile this driver as a module, choose M here: the module
will be called 8250_exar_st16c554.
config SERIAL_8250_HUB6
tristate "Support Hub6 cards"
depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
help
Say Y here if you have a HUB6 serial board.
To compile this driver as a module, choose M here: the module
will be called 8250_hub6.
config SERIAL_8250_SHARE_IRQ
bool "Support for sharing serial interrupts"
depends on SERIAL_8250_EXTENDED
help
Some serial boards have hardware support which allows multiple dumb
serial ports on the same board to share a single IRQ. To enable
support for this in the serial driver, say Y here.
config SERIAL_8250_DETECT_IRQ
bool "Autodetect IRQ on standard ports (unsafe)"
depends on SERIAL_8250_EXTENDED
help
Say Y here if you want the kernel to try to guess which IRQ
to use for your serial port.
This is considered unsafe; it is far better to configure the IRQ in
a boot script using the setserial command.
If unsure, say N.
config SERIAL_8250_RSA
bool "Support RSA serial ports"
depends on SERIAL_8250_EXTENDED
help
::: To be written :::
config SERIAL_8250_MCA
tristate "Support 8250-type ports on MCA buses"
depends on SERIAL_8250 != n && MCA
help
Say Y here if you have a MCA serial ports.
To compile this driver as a module, choose M here: the module
will be called 8250_mca.
config SERIAL_8250_ACORN
tristate "Acorn expansion card serial port support"
depends on ARCH_ACORN && SERIAL_8250
help
If you have an Atomwide Serial card or Serial Port card for an Acorn
system, say Y to this option. The driver can handle 1, 2, or 3 port
cards. If unsure, say N.
config SERIAL_8250_RM9K
bool "Support for MIPS RM9xxx integrated serial port"
depends on SERIAL_8250 != n && SERIAL_RM9000
select SERIAL_8250_SHARE_IRQ
help
Selecting this option will add support for the integrated serial
port hardware found on MIPS RM9122 and similar processors.
If unsure, say N.
config SERIAL_8250_DW
tristate "Support for Synopsys DesignWare 8250 quirks"
depends on SERIAL_8250 && OF
help
Selecting this option will enable handling of the extra features
present in the Synopsys DesignWare APB UART.
source "drivers/tty/serial/8250/Kconfig"
comment "Non-8250 serial port support"
@ -536,15 +264,6 @@ config SERIAL_MAX3107
help
MAX3107 chip support
config SERIAL_MAX3107_AAVA
tristate "MAX3107 AAVA platform support"
depends on X86_MRST && SERIAL_MAX3107 && GPIOLIB
select SERIAL_CORE
help
Support for the MAX3107 chip configuration found on the AAVA
platform. Includes the extra initialisation and GPIO support
neded for this device.
config SERIAL_DZ
bool "DECstation DZ serial driver"
depends on MACH_DECSTATION && 32BIT

20
drivers/tty/serial/Makefile
View File

@ -14,22 +14,9 @@ obj-$(CONFIG_SERIAL_SUNZILOG) += sunzilog.o
obj-$(CONFIG_SERIAL_SUNSU) += sunsu.o
obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o
obj-$(CONFIG_SERIAL_8250) += 8250.o
obj-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o
obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o
obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o
obj-$(CONFIG_SERIAL_8250_HP300) += 8250_hp300.o
obj-$(CONFIG_SERIAL_8250_CS) += serial_cs.o
obj-$(CONFIG_SERIAL_8250_ACORN) += 8250_acorn.o
obj-$(CONFIG_SERIAL_8250_CONSOLE) += 8250_early.o
obj-$(CONFIG_SERIAL_8250_FOURPORT) += 8250_fourport.o
obj-$(CONFIG_SERIAL_8250_ACCENT) += 8250_accent.o
obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o
obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o
obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o
obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o
# Now bring in any enabled 8250/16450/16550 type drivers.
obj-$(CONFIG_SERIAL_8250) += 8250/
obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
@ -42,7 +29,6 @@ obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o
obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o
obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
obj-$(CONFIG_SERIAL_MAX3107) += max3107.o
obj-$(CONFIG_SERIAL_MAX3107_AAVA) += max3107-aava.o
obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
obj-$(CONFIG_SERIAL_MUX) += mux.o
obj-$(CONFIG_SERIAL_68328) += 68328serial.o

30
drivers/tty/serial/amba-pl011.c
View File

@ -159,6 +159,7 @@ struct uart_amba_port {
unsigned int fifosize; /* vendor-specific */
unsigned int lcrh_tx; /* vendor-specific */
unsigned int lcrh_rx; /* vendor-specific */
unsigned int old_cr; /* state during shutdown */
bool autorts;
char type[12];
bool interrupt_may_hang; /* vendor-specific */
@ -1411,7 +1412,9 @@ static int pl011_startup(struct uart_port *port)
while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY)
barrier();
cr = UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE;
/* restore RTS and DTR */
cr = uap->old_cr & (UART011_CR_RTS | UART011_CR_DTR);
cr |= UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE;
writew(cr, uap->port.membase + UART011_CR);
/* Clear pending error interrupts */
@ -1469,6 +1472,7 @@ static void pl011_shutdown_channel(struct uart_amba_port *uap,
static void pl011_shutdown(struct uart_port *port)
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
/*
* disable all interrupts
@ -1488,9 +1492,16 @@ static void pl011_shutdown(struct uart_port *port)
/*
* disable the port
* disable the port. It should not disable RTS and DTR.
* Also RTS and DTR state should be preserved to restore
* it during startup().
*/
uap->autorts = false;
writew(UART01x_CR_UARTEN | UART011_CR_TXE, uap->port.membase + UART011_CR);
cr = readw(uap->port.membase + UART011_CR);
uap->old_cr = cr;
cr &= UART011_CR_RTS | UART011_CR_DTR;
cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
writew(cr, uap->port.membase + UART011_CR);
/*
* disable break condition and fifos
@ -1740,9 +1751,19 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
{
struct uart_amba_port *uap = amba_ports[co->index];
unsigned int status, old_cr, new_cr;
unsigned long flags;
int locked = 1;
clk_enable(uap->clk);
local_irq_save(flags);
if (uap->port.sysrq)
locked = 0;
else if (oops_in_progress)
locked = spin_trylock(&uap->port.lock);
else
spin_lock(&uap->port.lock);
/*
* First save the CR then disable the interrupts
*/
@ -1762,6 +1783,10 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
} while (status & UART01x_FR_BUSY);
writew(old_cr, uap->port.membase + UART011_CR);
if (locked)
spin_unlock(&uap->port.lock);
local_irq_restore(flags);
clk_disable(uap->clk);
}
@ -1905,6 +1930,7 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
uap->vendor = vendor;
uap->lcrh_rx = vendor->lcrh_rx;
uap->lcrh_tx = vendor->lcrh_tx;
uap->old_cr = 0;
uap->fifosize = vendor->fifosize;
uap->interrupt_may_hang = vendor->interrupt_may_hang;
uap->port.dev = &dev->dev;

1
drivers/tty/serial/jsm/jsm_driver.c
View File

@ -251,6 +251,7 @@ static void jsm_io_resume(struct pci_dev *pdev)
struct jsm_board *brd = pci_get_drvdata(pdev);
pci_restore_state(pdev);
pci_save_state(pdev);
jsm_uart_port_init(brd);
}

344
drivers/tty/serial/max3107-aava.c
View File

@ -1,344 +0,0 @@
/*
* max3107.c - spi uart protocol driver for Maxim 3107
* Based on max3100.c
* by Christian Pellegrin <chripell@evolware.org>
* and max3110.c
* by Feng Tang <feng.tang@intel.com>
*
* Copyright (C) Aavamobile 2009
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
*/
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
#include <linux/spi/spi.h>
#include <linux/freezer.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/sfi.h>
#include <linux/module.h>
#include <asm/mrst.h>
#include "max3107.h"
/* GPIO direction to input function */
static int max3107_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
{
struct max3107_port *s = container_of(chip, struct max3107_port, chip);
u16 buf[1]; /* Buffer for SPI transfer */
if (offset >= MAX3107_GPIO_COUNT) {
dev_err(&s->spi->dev, "Invalid GPIO\n");
return -EINVAL;
}
/* Read current GPIO configuration register */
buf[0] = MAX3107_GPIOCFG_REG;
/* Perform SPI transfer */
if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) {
dev_err(&s->spi->dev, "SPI transfer GPIO read failed\n");
return -EIO;
}
buf[0] &= MAX3107_SPI_RX_DATA_MASK;
/* Set GPIO to input */
buf[0] &= ~(0x0001 << offset);
/* Write new GPIO configuration register value */
buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG);
/* Perform SPI transfer */
if (max3107_rw(s, (u8 *)buf, NULL, 2)) {
dev_err(&s->spi->dev, "SPI transfer GPIO write failed\n");
return -EIO;
}
return 0;
}
/* GPIO direction to output function */
static int max3107_gpio_direction_out(struct gpio_chip *chip, unsigned offset,
int value)
{
struct max3107_port *s = container_of(chip, struct max3107_port, chip);
u16 buf[2]; /* Buffer for SPI transfers */
if (offset >= MAX3107_GPIO_COUNT) {
dev_err(&s->spi->dev, "Invalid GPIO\n");
return -EINVAL;
}
/* Read current GPIO configuration and data registers */
buf[0] = MAX3107_GPIOCFG_REG;
buf[1] = MAX3107_GPIODATA_REG;
/* Perform SPI transfer */
if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) {
dev_err(&s->spi->dev, "SPI transfer gpio failed\n");
return -EIO;
}
buf[0] &= MAX3107_SPI_RX_DATA_MASK;
buf[1] &= MAX3107_SPI_RX_DATA_MASK;
/* Set GPIO to output */
buf[0] |= (0x0001 << offset);
/* Set value */
if (value)
buf[1] |= (0x0001 << offset);
else
buf[1] &= ~(0x0001 << offset);
/* Write new GPIO configuration and data register values */
buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG);
buf[1] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG);
/* Perform SPI transfer */
if (max3107_rw(s, (u8 *)buf, NULL, 4)) {
dev_err(&s->spi->dev,
"SPI transfer for GPIO conf data w failed\n");
return -EIO;
}
return 0;
}
/* GPIO value query function */
static int max3107_gpio_get(struct gpio_chip *chip, unsigned offset)
{
struct max3107_port *s = container_of(chip, struct max3107_port, chip);
u16 buf[1]; /* Buffer for SPI transfer */
if (offset >= MAX3107_GPIO_COUNT) {
dev_err(&s->spi->dev, "Invalid GPIO\n");
return -EINVAL;
}
/* Read current GPIO data register */
buf[0] = MAX3107_GPIODATA_REG;
/* Perform SPI transfer */
if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) {
dev_err(&s->spi->dev, "SPI transfer GPIO data r failed\n");
return -EIO;
}
buf[0] &= MAX3107_SPI_RX_DATA_MASK;
/* Return value */
return buf[0] & (0x0001 << offset);
}
/* GPIO value set function */
static void max3107_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
struct max3107_port *s = container_of(chip, struct max3107_port, chip);
u16 buf[2]; /* Buffer for SPI transfers */
if (offset >= MAX3107_GPIO_COUNT) {
dev_err(&s->spi->dev, "Invalid GPIO\n");
return;
}
/* Read current GPIO configuration registers*/
buf[0] = MAX3107_GPIODATA_REG;
buf[1] = MAX3107_GPIOCFG_REG;
/* Perform SPI transfer */
if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) {
dev_err(&s->spi->dev,
"SPI transfer for GPIO data and config read failed\n");
return;
}
buf[0] &= MAX3107_SPI_RX_DATA_MASK;
buf[1] &= MAX3107_SPI_RX_DATA_MASK;
if (!(buf[1] & (0x0001 << offset))) {
/* Configured as input, can't set value */
dev_warn(&s->spi->dev,
"Trying to set value for input GPIO\n");
return;
}
/* Set value */
if (value)
buf[0] |= (0x0001 << offset);
else
buf[0] &= ~(0x0001 << offset);
/* Write new GPIO data register value */
buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG);
/* Perform SPI transfer */
if (max3107_rw(s, (u8 *)buf, NULL, 2))
dev_err(&s->spi->dev, "SPI transfer GPIO data w failed\n");
}
/* GPIO chip data */
static struct gpio_chip max3107_gpio_chip = {
.owner = THIS_MODULE,
.direction_input = max3107_gpio_direction_in,
.direction_output = max3107_gpio_direction_out,
.get = max3107_gpio_get,
.set = max3107_gpio_set,
.can_sleep = 1,
.base = MAX3107_GPIO_BASE,
.ngpio = MAX3107_GPIO_COUNT,
};
/**
* max3107_aava_reset - reset on AAVA systems
* @spi: The SPI device we are probing
*
* Reset the device ready for probing.
*/
static int max3107_aava_reset(struct spi_device *spi)
{
/* Reset the chip */
if (gpio_request(MAX3107_RESET_GPIO, "max3107")) {
pr_err("Requesting RESET GPIO failed\n");
return -EIO;
}
if (gpio_direction_output(MAX3107_RESET_GPIO, 0)) {
pr_err("Setting RESET GPIO to 0 failed\n");
gpio_free(MAX3107_RESET_GPIO);
return -EIO;
}
msleep(MAX3107_RESET_DELAY);
if (gpio_direction_output(MAX3107_RESET_GPIO, 1)) {
pr_err("Setting RESET GPIO to 1 failed\n");
gpio_free(MAX3107_RESET_GPIO);
return -EIO;
}
gpio_free(MAX3107_RESET_GPIO);
msleep(MAX3107_WAKEUP_DELAY);
return 0;
}
static int max3107_aava_configure(struct max3107_port *s)
{
int retval;
/* Initialize GPIO chip data */
s->chip = max3107_gpio_chip;
s->chip.label = s->spi->modalias;
s->chip.dev = &s->spi->dev;
/* Add GPIO chip */
retval = gpiochip_add(&s->chip);
if (retval) {
dev_err(&s->spi->dev, "Adding GPIO chip failed\n");
return retval;
}
/* Temporary fix for EV2 boot problems, set modem reset to 0 */
max3107_gpio_direction_out(&s->chip, 3, 0);
return 0;
}
#if 0
/* This will get enabled once we have the board stuff merged for this
specific case */
static const struct baud_table brg13_ext[] = {
{ 300, MAX3107_BRG13_B300 },
{ 600, MAX3107_BRG13_B600 },
{ 1200, MAX3107_BRG13_B1200 },
{ 2400, MAX3107_BRG13_B2400 },
{ 4800, MAX3107_BRG13_B4800 },
{ 9600, MAX3107_BRG13_B9600 },
{ 19200, MAX3107_BRG13_B19200 },
{ 57600, MAX3107_BRG13_B57600 },
{ 115200, MAX3107_BRG13_B115200 },
{ 230400, MAX3107_BRG13_B230400 },
{ 460800, MAX3107_BRG13_B460800 },
{ 921600, MAX3107_BRG13_B921600 },
{ 0, 0 }
};
static void max3107_aava_init(struct max3107_port *s)
{
/*override for AAVA SC specific*/
if (mrst_platform_id() == MRST_PLATFORM_AAVA_SC) {
if (get_koski_build_id() <= KOSKI_EV2)
if (s->ext_clk) {
s->brg_cfg = MAX3107_BRG13_B9600;
s->baud_tbl = (struct baud_table *)brg13_ext;
}
}
}
#endif
static int __devexit max3107_aava_remove(struct spi_device *spi)
{
struct max3107_port *s = dev_get_drvdata(&spi->dev);
/* Remove GPIO chip */
if (gpiochip_remove(&s->chip))
dev_warn(&spi->dev, "Removing GPIO chip failed\n");
/* Then do the default remove */
return max3107_remove(spi);
}
/* Platform data */
static struct max3107_plat aava_plat_data = {
.loopback = 0,
.ext_clk = 1,
/* .init = max3107_aava_init, */
.configure = max3107_aava_configure,
.hw_suspend = max3107_hw_susp,
.polled_mode = 0,
.poll_time = 0,
};
static int __devinit max3107_probe_aava(struct spi_device *spi)
{
int err = max3107_aava_reset(spi);
if (err < 0)
return err;
return max3107_probe(spi, &aava_plat_data);
}
/* Spi driver data */
static struct spi_driver max3107_driver = {
.driver = {
.name = "aava-max3107",
.owner = THIS_MODULE,
},
.probe = max3107_probe_aava,
.remove = __devexit_p(max3107_aava_remove),
.suspend = max3107_suspend,
.resume = max3107_resume,
};
/* Driver init function */
static int __init max3107_init(void)
{
return spi_register_driver(&max3107_driver);
}
/* Driver exit function */
static void __exit max3107_exit(void)
{
spi_unregister_driver(&max3107_driver);
}
module_init(max3107_init);
module_exit(max3107_exit);
MODULE_DESCRIPTION("MAX3107 driver");
MODULE_AUTHOR("Aavamobile");
MODULE_ALIAS("spi:aava-max3107");
MODULE_LICENSE("GPL v2");

4
drivers/tty/serial/omap-serial.c
View File

@ -1160,7 +1160,7 @@ static struct uart_driver serial_omap_reg = {
.cons = OMAP_CONSOLE,
};
#ifdef CONFIG_SUSPEND
#ifdef CONFIG_PM_SLEEP
static int serial_omap_suspend(struct device *dev)
{
struct uart_omap_port *up = dev_get_drvdata(dev);
@ -1521,6 +1521,7 @@ static void serial_omap_mdr1_errataset(struct uart_omap_port *up, u8 mdr1)
}
}
#ifdef CONFIG_PM_RUNTIME
static void serial_omap_restore_context(struct uart_omap_port *up)
{
if (up->errata & UART_ERRATA_i202_MDR1_ACCESS)
@ -1550,7 +1551,6 @@ static void serial_omap_restore_context(struct uart_omap_port *up)
serial_out(up, UART_OMAP_MDR1, up->mdr1);
}
#ifdef CONFIG_PM_RUNTIME
static int serial_omap_runtime_suspend(struct device *dev)
{
struct uart_omap_port *up = dev_get_drvdata(dev);

6
drivers/tty/serial/serial_core.c
View File

@ -2348,11 +2348,11 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport)
*/
tty_dev = tty_register_device(drv->tty_driver, uport->line, uport->dev);
if (likely(!IS_ERR(tty_dev))) {
device_init_wakeup(tty_dev, 1);
device_set_wakeup_enable(tty_dev, 0);
} else
device_set_wakeup_capable(tty_dev, 1);
} else {
printk(KERN_ERR "Cannot register tty device on line %d\n",
uport->line);
}
/*
* Ensure UPF_DEAD is not set.

12
drivers/tty/tty_port.c
View File

@ -227,7 +227,6 @@ int tty_port_block_til_ready(struct tty_port *port,
int do_clocal = 0, retval;
unsigned long flags;
DEFINE_WAIT(wait);
int cd;
/* block if port is in the process of being closed */
if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
@ -284,11 +283,14 @@ int tty_port_block_til_ready(struct tty_port *port,
retval = -ERESTARTSYS;
break;
}
/* Probe the carrier. For devices with no carrier detect this
will always return true */
cd = tty_port_carrier_raised(port);
/*
* Probe the carrier. For devices with no carrier detect
* tty_port_carrier_raised will always return true.
* Never ask drivers if CLOCAL is set, this causes troubles
* on some hardware.
*/
if (!(port->flags & ASYNC_CLOSING) &&
(do_clocal || cd))
(do_clocal || tty_port_carrier_raised(port)))
break;
if (signal_pending(current)) {
retval = -ERESTARTSYS;

59
drivers/usb/class/cdc-wdm.c
View File

@ -57,6 +57,8 @@ MODULE_DEVICE_TABLE (usb, wdm_ids);
#define WDM_MAX 16
/* CDC-WMC r1.1 requires wMaxCommand to be "at least 256 decimal (0x100)" */
#define WDM_DEFAULT_BUFSIZE 256
static DEFINE_MUTEX(wdm_mutex);
@ -88,7 +90,8 @@ struct wdm_device {
int count;
dma_addr_t shandle;
dma_addr_t ihandle;
struct mutex lock;
struct mutex wlock;
struct mutex rlock;
wait_queue_head_t wait;
struct work_struct rxwork;
int werr;
@ -323,7 +326,7 @@ static ssize_t wdm_write
}
/* concurrent writes and disconnect */
r = mutex_lock_interruptible(&desc->lock);
r = mutex_lock_interruptible(&desc->wlock);
rv = -ERESTARTSYS;
if (r) {
kfree(buf);
@ -386,7 +389,7 @@ static ssize_t wdm_write
out:
usb_autopm_put_interface(desc->intf);
outnp:
mutex_unlock(&desc->lock);
mutex_unlock(&desc->wlock);
outnl:
return rv < 0 ? rv : count;
}
@ -399,7 +402,7 @@ static ssize_t wdm_read
struct wdm_device *desc = file->private_data;
rv = mutex_lock_interruptible(&desc->lock); /*concurrent reads */
rv = mutex_lock_interruptible(&desc->rlock); /*concurrent reads */
if (rv < 0)
return -ERESTARTSYS;
@ -467,14 +470,16 @@ retry:
for (i = 0; i < desc->length - cntr; i++)
desc->ubuf[i] = desc->ubuf[i + cntr];
spin_lock_irq(&desc->iuspin);
desc->length -= cntr;
spin_unlock_irq(&desc->iuspin);
/* in case we had outstanding data */
if (!desc->length)
clear_bit(WDM_READ, &desc->flags);
rv = cntr;
err:
mutex_unlock(&desc->lock);
mutex_unlock(&desc->rlock);
return rv;
}
@ -540,7 +545,8 @@ static int wdm_open(struct inode *inode, struct file *file)
}
intf->needs_remote_wakeup = 1;
mutex_lock(&desc->lock);
/* using write lock to protect desc->count */
mutex_lock(&desc->wlock);
if (!desc->count++) {
desc->werr = 0;
desc->rerr = 0;
@ -553,7 +559,7 @@ static int wdm_open(struct inode *inode, struct file *file)
} else {
rv = 0;
}
mutex_unlock(&desc->lock);
mutex_unlock(&desc->wlock);
usb_autopm_put_interface(desc->intf);
out:
mutex_unlock(&wdm_mutex);
@ -565,9 +571,11 @@ static int wdm_release(struct inode *inode, struct file *file)
struct wdm_device *desc = file->private_data;
mutex_lock(&wdm_mutex);
mutex_lock(&desc->lock);
/* using write lock to protect desc->count */
mutex_lock(&desc->wlock);
desc->count--;
mutex_unlock(&desc->lock);
mutex_unlock(&desc->wlock);
if (!desc->count) {
dev_dbg(&desc->intf->dev, "wdm_release: cleanup");
@ -630,7 +638,7 @@ static int wdm_probe(struct usb_interface *intf, const struct usb_device_id *id)
struct usb_cdc_dmm_desc *dmhd;
u8 *buffer = intf->altsetting->extra;
int buflen = intf->altsetting->extralen;
u16 maxcom = 0;
u16 maxcom = WDM_DEFAULT_BUFSIZE;
if (!buffer)
goto out;
@ -665,7 +673,8 @@ next_desc:
desc = kzalloc(sizeof(struct wdm_device), GFP_KERNEL);
if (!desc)
goto out;
mutex_init(&desc->lock);
mutex_init(&desc->rlock);
mutex_init(&desc->wlock);
spin_lock_init(&desc->iuspin);
init_waitqueue_head(&desc->wait);
desc->wMaxCommand = maxcom;
@ -716,7 +725,7 @@ next_desc:
goto err;
desc->inbuf = usb_alloc_coherent(interface_to_usbdev(intf),
desc->bMaxPacketSize0,
desc->wMaxCommand,
GFP_KERNEL,
&desc->response->transfer_dma);
if (!desc->inbuf)
@ -779,11 +788,13 @@ static void wdm_disconnect(struct usb_interface *intf)
/* to terminate pending flushes */
clear_bit(WDM_IN_USE, &desc->flags);
spin_unlock_irqrestore(&desc->iuspin, flags);
mutex_lock(&desc->lock);
wake_up_all(&desc->wait);
mutex_lock(&desc->rlock);
mutex_lock(&desc->wlock);
kill_urbs(desc);
cancel_work_sync(&desc->rxwork);
mutex_unlock(&desc->lock);
wake_up_all(&desc->wait);
mutex_unlock(&desc->wlock);
mutex_unlock(&desc->rlock);
if (!desc->count)
cleanup(desc);
mutex_unlock(&wdm_mutex);
@ -798,8 +809,10 @@ static int wdm_suspend(struct usb_interface *intf, pm_message_t message)
dev_dbg(&desc->intf->dev, "wdm%d_suspend\n", intf->minor);
/* if this is an autosuspend the caller does the locking */
if (!PMSG_IS_AUTO(message))
mutex_lock(&desc->lock);
if (!PMSG_IS_AUTO(message)) {
mutex_lock(&desc->rlock);
mutex_lock(&desc->wlock);
}
spin_lock_irq(&desc->iuspin);
if (PMSG_IS_AUTO(message) &&
@ -815,8 +828,10 @@ static int wdm_suspend(struct usb_interface *intf, pm_message_t message)
kill_urbs(desc);
cancel_work_sync(&desc->rxwork);
}
if (!PMSG_IS_AUTO(message))
mutex_unlock(&desc->lock);
if (!PMSG_IS_AUTO(message)) {
mutex_unlock(&desc->wlock);
mutex_unlock(&desc->rlock);
}
return rv;
}
@ -854,7 +869,8 @@ static int wdm_pre_reset(struct usb_interface *intf)
{
struct wdm_device *desc = usb_get_intfdata(intf);
mutex_lock(&desc->lock);
mutex_lock(&desc->rlock);
mutex_lock(&desc->wlock);
kill_urbs(desc);
/*
@ -876,7 +892,8 @@ static int wdm_post_reset(struct usb_interface *intf)
int rv;
rv = recover_from_urb_loss(desc);
mutex_unlock(&desc->lock);
mutex_unlock(&desc->wlock);
mutex_unlock(&desc->rlock);
return 0;
}

15
drivers/usb/dwc3/ep0.c
View File

@ -126,7 +126,6 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
struct dwc3_request *req)
{
struct dwc3 *dwc = dep->dwc;
u32 type;
int ret = 0;
req->request.actual = 0;
@ -149,20 +148,14 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
direction = !!(dep->flags & DWC3_EP0_DIR_IN);
if (dwc->ep0state == EP0_STATUS_PHASE) {
type = dwc->three_stage_setup
? DWC3_TRBCTL_CONTROL_STATUS3
: DWC3_TRBCTL_CONTROL_STATUS2;
} else if (dwc->ep0state == EP0_DATA_PHASE) {
type = DWC3_TRBCTL_CONTROL_DATA;
} else {
/* should never happen */
WARN_ON(1);
if (dwc->ep0state != EP0_DATA_PHASE) {
dev_WARN(dwc->dev, "Unexpected pending request\n");
return 0;
}
ret = dwc3_ep0_start_trans(dwc, direction,
req->request.dma, req->request.length, type);
req->request.dma, req->request.length,
DWC3_TRBCTL_CONTROL_DATA);
dep->flags &= ~(DWC3_EP_PENDING_REQUEST |
DWC3_EP0_DIR_IN);
} else if (dwc->delayed_status) {

2
drivers/usb/dwc3/gadget.c
View File

@ -101,7 +101,7 @@ void dwc3_unmap_buffer_from_dma(struct dwc3_request *req)
if (req->request.num_mapped_sgs) {
req->request.dma = DMA_ADDR_INVALID;
dma_unmap_sg(dwc->dev, req->request.sg,
req->request.num_sgs,
req->request.num_mapped_sgs,
req->direction ? DMA_TO_DEVICE
: DMA_FROM_DEVICE);

7
drivers/usb/gadget/composite.c
View File

@ -175,13 +175,12 @@ ep_found:
_ep->comp_desc = comp_desc;
if (g->speed == USB_SPEED_SUPER) {
switch (usb_endpoint_type(_ep->desc)) {
case USB_ENDPOINT_XFER_BULK:
case USB_ENDPOINT_XFER_INT:
_ep->maxburst = comp_desc->bMaxBurst;
break;
case USB_ENDPOINT_XFER_ISOC:
/* mult: bits 1:0 of bmAttributes */
_ep->mult = comp_desc->bmAttributes & 0x3;
case USB_ENDPOINT_XFER_BULK:
case USB_ENDPOINT_XFER_INT:
_ep->maxburst = comp_desc->bMaxBurst;
break;
default:
/* Do nothing for control endpoints */

2
drivers/usb/gadget/epautoconf.c
View File

@ -126,7 +126,7 @@ ep_matches (
* descriptor and see if the EP matches it
*/
if (usb_endpoint_xfer_bulk(desc)) {
if (ep_comp) {
if (ep_comp && gadget->max_speed >= USB_SPEED_SUPER) {
num_req_streams = ep_comp->bmAttributes & 0x1f;
if (num_req_streams > ep->max_streams)
return 0;

10
drivers/usb/gadget/f_mass_storage.c
View File

@ -3123,15 +3123,15 @@ fsg_add(struct usb_composite_dev *cdev, struct usb_configuration *c,
struct fsg_module_parameters {
char *file[FSG_MAX_LUNS];
int ro[FSG_MAX_LUNS];
int removable[FSG_MAX_LUNS];
int cdrom[FSG_MAX_LUNS];
int nofua[FSG_MAX_LUNS];
bool ro[FSG_MAX_LUNS];
bool removable[FSG_MAX_LUNS];
bool cdrom[FSG_MAX_LUNS];
bool nofua[FSG_MAX_LUNS];
unsigned int file_count, ro_count, removable_count, cdrom_count;
unsigned int nofua_count;
unsigned int luns; /* nluns */
int stall; /* can_stall */
bool stall; /* can_stall */
};
#define _FSG_MODULE_PARAM_ARRAY(prefix, params, name, type, desc) \

4
drivers/usb/gadget/fsl_udc_core.c
View File

@ -1430,7 +1430,7 @@ static void setup_received_irq(struct fsl_udc *udc,
int pipe = get_pipe_by_windex(wIndex);
struct fsl_ep *ep;
if (wValue != 0 || wLength != 0 || pipe > udc->max_ep)
if (wValue != 0 || wLength != 0 || pipe >= udc->max_ep)
break;
ep = get_ep_by_pipe(udc, pipe);
@ -1673,7 +1673,7 @@ static void dtd_complete_irq(struct fsl_udc *udc)
if (!bit_pos)
return;
for (i = 0; i < udc->max_ep * 2; i++) {
for (i = 0; i < udc->max_ep; i++) {
ep_num = i >> 1;
direction = i % 2;

107
drivers/usb/gadget/langwell_udc.c
View File

@ -11,11 +11,6 @@
/* #undef DEBUG */
/* #undef VERBOSE_DEBUG */
#if defined(CONFIG_USB_LANGWELL_OTG)
#define OTG_TRANSCEIVER
#endif
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
@ -1522,8 +1517,7 @@ static void langwell_udc_stop(struct langwell_udc *dev)
/* stop all USB activities */
static void stop_activity(struct langwell_udc *dev,
struct usb_gadget_driver *driver)
static void stop_activity(struct langwell_udc *dev)
{
struct langwell_ep *ep;
dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
@ -1535,9 +1529,9 @@ static void stop_activity(struct langwell_udc *dev,
}
/* report disconnect; the driver is already quiesced */
if (driver) {
if (dev->driver) {
spin_unlock(&dev->lock);
driver->disconnect(&dev->gadget);
dev->driver->disconnect(&dev->gadget);
spin_lock(&dev->lock);
}
@ -1925,11 +1919,10 @@ static int langwell_stop(struct usb_gadget *g,
/* stop all usb activities */
dev->gadget.speed = USB_SPEED_UNKNOWN;
stop_activity(dev, driver);
spin_unlock_irqrestore(&dev->lock, flags);
dev->gadget.dev.driver = NULL;
dev->driver = NULL;
stop_activity(dev);
spin_unlock_irqrestore(&dev->lock, flags);
device_remove_file(&dev->pdev->dev, &dev_attr_function);
@ -2315,13 +2308,9 @@ static void handle_setup_packet(struct langwell_udc *dev,
if (!gadget_is_otg(&dev->gadget))
break;
else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE) {
else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE)
dev->gadget.b_hnp_enable = 1;
#ifdef OTG_TRANSCEIVER
if (!dev->lotg->otg.default_a)
dev->lotg->hsm.b_hnp_enable = 1;
#endif
} else if (setup->bRequest == USB_DEVICE_A_HNP_SUPPORT)
else if (setup->bRequest == USB_DEVICE_A_HNP_SUPPORT)
dev->gadget.a_hnp_support = 1;
else if (setup->bRequest ==
USB_DEVICE_A_ALT_HNP_SUPPORT)
@ -2733,7 +2722,7 @@ static void handle_usb_reset(struct langwell_udc *dev)
dev->bus_reset = 1;
/* reset all the queues, stop all USB activities */
stop_activity(dev, dev->driver);
stop_activity(dev);
dev->usb_state = USB_STATE_DEFAULT;
} else {
dev_vdbg(&dev->pdev->dev, "device controller reset\n");
@ -2741,7 +2730,7 @@ static void handle_usb_reset(struct langwell_udc *dev)
langwell_udc_reset(dev);
/* reset all the queues, stop all USB activities */
stop_activity(dev, dev->driver);
stop_activity(dev);
/* reset ep0 dQH and endptctrl */
ep0_reset(dev);
@ -2752,12 +2741,6 @@ static void handle_usb_reset(struct langwell_udc *dev)
dev->usb_state = USB_STATE_ATTACHED;
}
#ifdef OTG_TRANSCEIVER
/* refer to USB OTG 6.6.2.3 b_hnp_en is cleared */
if (!dev->lotg->otg.default_a)
dev->lotg->hsm.b_hnp_enable = 0;
#endif
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
}
@ -2770,29 +2753,6 @@ static void handle_bus_suspend(struct langwell_udc *dev)
dev->resume_state = dev->usb_state;
dev->usb_state = USB_STATE_SUSPENDED;
#ifdef OTG_TRANSCEIVER
if (dev->lotg->otg.default_a) {
if (dev->lotg->hsm.b_bus_suspend_vld == 1) {
dev->lotg->hsm.b_bus_suspend = 1;
/* notify transceiver the state changes */
if (spin_trylock(&dev->lotg->wq_lock)) {
langwell_update_transceiver();
spin_unlock(&dev->lotg->wq_lock);
}
}
dev->lotg->hsm.b_bus_suspend_vld++;
} else {
if (!dev->lotg->hsm.a_bus_suspend) {
dev->lotg->hsm.a_bus_suspend = 1;
/* notify transceiver the state changes */
if (spin_trylock(&dev->lotg->wq_lock)) {
langwell_update_transceiver();
spin_unlock(&dev->lotg->wq_lock);
}
}
}
#endif
/* report suspend to the driver */
if (dev->driver) {
if (dev->driver->suspend) {
@ -2823,11 +2783,6 @@ static void handle_bus_resume(struct langwell_udc *dev)
if (dev->pdev->device != 0x0829)
langwell_phy_low_power(dev, 0);
#ifdef OTG_TRANSCEIVER
if (dev->lotg->otg.default_a == 0)
dev->lotg->hsm.a_bus_suspend = 0;
#endif
/* report resume to the driver */
if (dev->driver) {
if (dev->driver->resume) {
@ -3020,7 +2975,6 @@ static void langwell_udc_remove(struct pci_dev *pdev)
dev->done = &done;
#ifndef OTG_TRANSCEIVER
/* free dTD dma_pool and dQH */
if (dev->dtd_pool)
dma_pool_destroy(dev->dtd_pool);
@ -3032,7 +2986,6 @@ static void langwell_udc_remove(struct pci_dev *pdev)
/* release SRAM caching */
if (dev->has_sram && dev->got_sram)
sram_deinit(dev);
#endif
if (dev->status_req) {
kfree(dev->status_req->req.buf);
@ -3045,7 +2998,6 @@ static void langwell_udc_remove(struct pci_dev *pdev)
if (dev->got_irq)
free_irq(pdev->irq, dev);
#ifndef OTG_TRANSCEIVER
if (dev->cap_regs)
iounmap(dev->cap_regs);
@ -3055,13 +3007,6 @@ static void langwell_udc_remove(struct pci_dev *pdev)
if (dev->enabled)
pci_disable_device(pdev);
#else
if (dev->transceiver) {
otg_put_transceiver(dev->transceiver);
dev->transceiver = NULL;
dev->lotg = NULL;
}
#endif
dev->cap_regs = NULL;
@ -3072,9 +3017,7 @@ static void langwell_udc_remove(struct pci_dev *pdev)
device_remove_file(&pdev->dev, &dev_attr_langwell_udc);
device_remove_file(&pdev->dev, &dev_attr_remote_wakeup);
#ifndef OTG_TRANSCEIVER
pci_set_drvdata(pdev, NULL);
#endif
/* free dev, wait for the release() finished */
wait_for_completion(&done);
@ -3089,9 +3032,7 @@ static int langwell_udc_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct langwell_udc *dev;
#ifndef OTG_TRANSCEIVER
unsigned long resource, len;
#endif
void __iomem *base = NULL;
size_t size;
int retval;
@ -3109,16 +3050,6 @@ static int langwell_udc_probe(struct pci_dev *pdev,
dev->pdev = pdev;
dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
#ifdef OTG_TRANSCEIVER
/* PCI device is already enabled by otg_transceiver driver */
dev->enabled = 1;
/* mem region and register base */
dev->region = 1;
dev->transceiver = otg_get_transceiver();
dev->lotg = otg_to_langwell(dev->transceiver);
base = dev->lotg->regs;
#else
pci_set_drvdata(pdev, dev);
/* now all the pci goodies ... */
@ -3139,7 +3070,6 @@ static int langwell_udc_probe(struct pci_dev *pdev,
dev->region = 1;
base = ioremap_nocache(resource, len);
#endif
if (base == NULL) {
dev_err(&dev->pdev->dev, "can't map memory\n");
retval = -EFAULT;
@ -3163,7 +3093,6 @@ static int langwell_udc_probe(struct pci_dev *pdev,
dev->got_sram = 0;
dev_vdbg(&dev->pdev->dev, "dev->has_sram: %d\n", dev->has_sram);
#ifndef OTG_TRANSCEIVER
/* enable SRAM caching if detected */
if (dev->has_sram && !dev->got_sram)
sram_init(dev);
@ -3182,7 +3111,6 @@ static int langwell_udc_probe(struct pci_dev *pdev,
goto error;
}
dev->got_irq = 1;
#endif
/* set stopped bit */
dev->stopped = 1;
@ -3257,10 +3185,8 @@ static int langwell_udc_probe(struct pci_dev *pdev,
dev->remote_wakeup = 0;
dev->dev_status = 1 << USB_DEVICE_SELF_POWERED;
#ifndef OTG_TRANSCEIVER
/* reset device controller */
langwell_udc_reset(dev);
#endif
/* initialize gadget structure */
dev->gadget.ops = &langwell_ops; /* usb_gadget_ops */
@ -3268,9 +3194,6 @@ static int langwell_udc_probe(struct pci_dev *pdev,
INIT_LIST_HEAD(&dev->gadget.ep_list); /* ep_list */
dev->gadget.speed = USB_SPEED_UNKNOWN; /* speed */
dev->gadget.max_speed = USB_SPEED_HIGH; /* support dual speed */
#ifdef OTG_TRANSCEIVER
dev->gadget.is_otg = 1; /* support otg mode */
#endif
/* the "gadget" abstracts/virtualizes the controller */
dev_set_name(&dev->gadget.dev, "gadget");
@ -3282,10 +3205,8 @@ static int langwell_udc_probe(struct pci_dev *pdev,
/* controller endpoints reinit */
eps_reinit(dev);
#ifndef OTG_TRANSCEIVER
/* reset ep0 dQH and endptctrl */
ep0_reset(dev);
#endif
/* create dTD dma_pool resource */
dev->dtd_pool = dma_pool_create("langwell_dtd",
@ -3367,7 +3288,7 @@ static int langwell_udc_suspend(struct pci_dev *pdev, pm_message_t state)
spin_lock_irq(&dev->lock);
/* stop all usb activities */
stop_activity(dev, dev->driver);
stop_activity(dev);
spin_unlock_irq(&dev->lock);
/* free dTD dma_pool and dQH */
@ -3525,22 +3446,14 @@ static struct pci_driver langwell_pci_driver = {
static int __init init(void)
{
#ifdef OTG_TRANSCEIVER
return langwell_register_peripheral(&langwell_pci_driver);
#else
return pci_register_driver(&langwell_pci_driver);
#endif
}
module_init(init);
static void __exit cleanup(void)
{
#ifdef OTG_TRANSCEIVER
return langwell_unregister_peripheral(&langwell_pci_driver);
#else
pci_unregister_driver(&langwell_pci_driver);
#endif
}
module_exit(cleanup);

1
drivers/usb/gadget/langwell_udc.h
View File

@ -8,7 +8,6 @@
*/
#include <linux/usb/langwell_udc.h>
#include <linux/usb/langwell_otg.h>
/*-------------------------------------------------------------------------*/

6
drivers/usb/gadget/storage_common.c
View File

@ -598,16 +598,16 @@ static __maybe_unused struct usb_ss_cap_descriptor fsg_ss_cap_desc = {
| USB_5GBPS_OPERATION),
.bFunctionalitySupport = USB_LOW_SPEED_OPERATION,
.bU1devExitLat = USB_DEFAULT_U1_DEV_EXIT_LAT,
.bU2DevExitLat = USB_DEFAULT_U2_DEV_EXIT_LAT,
.bU2DevExitLat = cpu_to_le16(USB_DEFAULT_U2_DEV_EXIT_LAT),
};
static __maybe_unused struct usb_bos_descriptor fsg_bos_desc = {
.bLength = USB_DT_BOS_SIZE,
.bDescriptorType = USB_DT_BOS,
.wTotalLength = USB_DT_BOS_SIZE
.wTotalLength = cpu_to_le16(USB_DT_BOS_SIZE
+ USB_DT_USB_EXT_CAP_SIZE
+ USB_DT_USB_SS_CAP_SIZE,
+ USB_DT_USB_SS_CAP_SIZE),
.bNumDeviceCaps = 2,
};

2
drivers/usb/host/ehci-fsl.c
View File

@ -125,7 +125,7 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver,
*/
if (pdata->init && pdata->init(pdev)) {
retval = -ENODEV;
goto err3;
goto err4;
}
/* Enable USB controller, 83xx or 8536 */

6
drivers/usb/host/ehci-pci.c
View File

@ -276,6 +276,9 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
/* Serial Bus Release Number is at PCI 0x60 offset */
pci_read_config_byte(pdev, 0x60, &ehci->sbrn);
if (pdev->vendor == PCI_VENDOR_ID_STMICRO
&& pdev->device == PCI_DEVICE_ID_STMICRO_USB_HOST)
ehci->sbrn = 0x20; /* ConneXT has no sbrn register */
/* Keep this around for a while just in case some EHCI
* implementation uses legacy PCI PM support. This test
@ -526,6 +529,9 @@ static const struct pci_device_id pci_ids [] = { {
/* handle any USB 2.0 EHCI controller */
PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_EHCI, ~0),
.driver_data = (unsigned long) &ehci_pci_hc_driver,
}, {
PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_USB_HOST),
.driver_data = (unsigned long) &ehci_pci_hc_driver,
},
{ /* end: all zeroes */ }
};

12
drivers/usb/host/ohci-dbg.c
View File

@ -82,6 +82,14 @@ urb_print(struct urb * urb, char * str, int small, int status)
ohci_dbg(ohci,format, ## arg ); \
} while (0);
/* Version for use where "next" is the address of a local variable */
#define ohci_dbg_nosw(ohci, next, size, format, arg...) \
do { \
unsigned s_len; \
s_len = scnprintf(*next, *size, format, ## arg); \
*size -= s_len; *next += s_len; \
} while (0);
static void ohci_dump_intr_mask (
struct ohci_hcd *ohci,
@ -653,7 +661,7 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf)
/* dump driver info, then registers in spec order */
ohci_dbg_sw (ohci, &next, &size,
ohci_dbg_nosw(ohci, &next, &size,
"bus %s, device %s\n"
"%s\n"
"%s\n",
@ -672,7 +680,7 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf)
/* hcca */
if (ohci->hcca)
ohci_dbg_sw (ohci, &next, &size,
ohci_dbg_nosw(ohci, &next, &size,
"hcca frame 0x%04x\n", ohci_frame_no(ohci));
/* other registers mostly affect frame timings */

4
drivers/usb/host/ohci-pci.c
View File

@ -397,6 +397,10 @@ static const struct pci_device_id pci_ids [] = { {
/* handle any USB OHCI controller */
PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_OHCI, ~0),
.driver_data = (unsigned long) &ohci_pci_hc_driver,
}, {
/* The device in the ConneXT I/O hub has no class reg */
PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_USB_OHCI),
.driver_data = (unsigned long) &ohci_pci_hc_driver,
}, { /* end: all zeroes */ }
};
MODULE_DEVICE_TABLE (pci, pci_ids);

6
drivers/usb/host/xhci-ring.c
View File

@ -1204,6 +1204,7 @@ static void handle_vendor_event(struct xhci_hcd *xhci,
*
* Returns a zero-based port number, which is suitable for indexing into each of
* the split roothubs' port arrays and bus state arrays.
* Add one to it in order to call xhci_find_slot_id_by_port.
*/
static unsigned int find_faked_portnum_from_hw_portnum(struct usb_hcd *hcd,
struct xhci_hcd *xhci, u32 port_id)
@ -1324,7 +1325,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
xhci_set_link_state(xhci, port_array, faked_port_index,
XDEV_U0);
slot_id = xhci_find_slot_id_by_port(hcd, xhci,
faked_port_index);
faked_port_index + 1);
if (!slot_id) {
xhci_dbg(xhci, "slot_id is zero\n");
goto cleanup;
@ -3323,7 +3324,8 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
/* Check TD length */
if (running_total != td_len) {
xhci_err(xhci, "ISOC TD length unmatch\n");
return -EINVAL;
ret = -EINVAL;
goto cleanup;
}
}

3
drivers/usb/misc/emi26.c
View File

@ -37,9 +37,6 @@ static int emi26_set_reset(struct usb_device *dev, unsigned char reset_bit);
static int emi26_load_firmware (struct usb_device *dev);
static int emi26_probe(struct usb_interface *intf, const struct usb_device_id *id);
static void emi26_disconnect(struct usb_interface *intf);
static int __init emi26_init (void);
static void __exit emi26_exit (void);
/* thanks to drivers/usb/serial/keyspan_pda.c code */
static int emi26_writememory (struct usb_device *dev, int address,

3
drivers/usb/misc/emi62.c
View File

@ -46,9 +46,6 @@ static int emi62_set_reset(struct usb_device *dev, unsigned char reset_bit);
static int emi62_load_firmware (struct usb_device *dev);
static int emi62_probe(struct usb_interface *intf, const struct usb_device_id *id);
static void emi62_disconnect(struct usb_interface *intf);
static int __init emi62_init (void);
static void __exit emi62_exit (void);
/* thanks to drivers/usb/serial/keyspan_pda.c code */
static int emi62_writememory(struct usb_device *dev, int address,

2
drivers/usb/misc/usbsevseg.c
View File

@ -24,7 +24,7 @@
#define VENDOR_ID 0x0fc5
#define PRODUCT_ID 0x1227
#define MAXLEN 6
#define MAXLEN 8
/* table of devices that work with this driver */
static const struct usb_device_id id_table[] = {

3
drivers/usb/musb/davinci.c
View File

@ -33,9 +33,6 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <mach/hardware.h>
#include <mach/memory.h>
#include <asm/gpio.h>
#include <mach/cputype.h>
#include <asm/mach-types.h>

5
drivers/usb/musb/musb_core.c
View File

@ -981,6 +981,9 @@ static void musb_shutdown(struct platform_device *pdev)
unsigned long flags;
pm_runtime_get_sync(musb->controller);
musb_gadget_cleanup(musb);
spin_lock_irqsave(&musb->lock, flags);
musb_platform_disable(musb);
musb_generic_disable(musb);
@ -1827,8 +1830,6 @@ static void musb_free(struct musb *musb)
sysfs_remove_group(&musb->controller->kobj, &musb_attr_group);
#endif
musb_gadget_cleanup(musb);
if (musb->nIrq >= 0) {
if (musb->irq_wake)
disable_irq_wake(musb->nIrq);

4
drivers/usb/musb/omap2430.c
View File

@ -222,7 +222,6 @@ static inline void omap2430_low_level_init(struct musb *musb)
musb_writel(musb->mregs, OTG_FORCESTDBY, l);
}
/* blocking notifier support */
static int musb_otg_notifications(struct notifier_block *nb,
unsigned long event, void *unused)
{
@ -231,7 +230,7 @@ static int musb_otg_notifications(struct notifier_block *nb,
musb->xceiv_event = event;
schedule_work(&musb->otg_notifier_work);
return 0;
return NOTIFY_OK;
}
static void musb_otg_notifier_work(struct work_struct *data_notifier_work)
@ -386,6 +385,7 @@ static void omap2430_musb_disable(struct musb *musb)
static int omap2430_musb_exit(struct musb *musb)
{
del_timer_sync(&musb_idle_timer);
cancel_work_sync(&musb->otg_notifier_work);
omap2430_low_level_exit(musb);
otg_put_transceiver(musb->xceiv);

18
drivers/usb/otg/Kconfig
View File

@ -86,20 +86,6 @@ config NOP_USB_XCEIV
built-in with usb ip or which are autonomous and doesn't require any
phy programming such as ISP1x04 etc.
config USB_LANGWELL_OTG
tristate "Intel Langwell USB OTG dual-role support"
depends on USB && PCI && INTEL_SCU_IPC
select USB_OTG
select USB_OTG_UTILS
help
Say Y here if you want to build Intel Langwell USB OTG
transciever driver in kernel. This driver implements role
switch between EHCI host driver and Langwell USB OTG
client driver.
To compile this driver as a module, choose M here: the
module will be called langwell_otg.
config USB_MSM_OTG
tristate "OTG support for Qualcomm on-chip USB controller"
depends on (USB || USB_GADGET) && ARCH_MSM
@ -124,7 +110,7 @@ config AB8500_USB
config FSL_USB2_OTG
bool "Freescale USB OTG Transceiver Driver"
depends on USB_EHCI_FSL && USB_GADGET_FSL_USB2
depends on USB_EHCI_FSL && USB_GADGET_FSL_USB2 && USB_SUSPEND
select USB_OTG
select USB_OTG_UTILS
help
@ -132,7 +118,7 @@ config FSL_USB2_OTG
config USB_MV_OTG
tristate "Marvell USB OTG support"
depends on USB_MV_UDC
depends on USB_MV_UDC && USB_SUSPEND
select USB_OTG
select USB_OTG_UTILS
help

1
drivers/usb/otg/Makefile
View File

@ -13,7 +13,6 @@ obj-$(CONFIG_USB_GPIO_VBUS) += gpio_vbus.o
obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
obj-$(CONFIG_TWL4030_USB) += twl4030-usb.o
obj-$(CONFIG_TWL6030_USB) += twl6030-usb.o
obj-$(CONFIG_USB_LANGWELL_OTG) += langwell_otg.o
obj-$(CONFIG_NOP_USB_XCEIV) += nop-usb-xceiv.o
obj-$(CONFIG_USB_ULPI) += ulpi.o
obj-$(CONFIG_USB_ULPI_VIEWPORT) += ulpi_viewport.o

2347
drivers/usb/otg/langwell_otg.c
View File

File diff suppressed because it is too large Load Diff

2
drivers/usb/otg/mv_otg.c
View File

@ -202,6 +202,7 @@ static void mv_otg_init_irq(struct mv_otg *mvotg)
static void mv_otg_start_host(struct mv_otg *mvotg, int on)
{
#ifdef CONFIG_USB
struct otg_transceiver *otg = &mvotg->otg;
struct usb_hcd *hcd;
@ -216,6 +217,7 @@ static void mv_otg_start_host(struct mv_otg *mvotg, int on)
usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
else
usb_remove_hcd(hcd);
#endif /* CONFIG_USB */
}
static void mv_otg_start_periphrals(struct mv_otg *mvotg, int on)

2
drivers/usb/renesas_usbhs/mod_gadget.c
View File

@ -425,7 +425,7 @@ static int usbhsg_recip_run_handle(struct usbhs_priv *priv,
struct usbhs_pipe *pipe;
int recip = ctrl->bRequestType & USB_RECIP_MASK;
int nth = le16_to_cpu(ctrl->wIndex) & USB_ENDPOINT_NUMBER_MASK;
int ret;
int ret = 0;
int (*func)(struct usbhs_priv *priv, struct usbhsg_uep *uep,
struct usb_ctrlrequest *ctrl);
char *msg;

103
drivers/usb/serial/cp210x.c
View File

@ -39,6 +39,8 @@ static void cp210x_get_termios(struct tty_struct *,
struct usb_serial_port *port);
static void cp210x_get_termios_port(struct usb_serial_port *port,
unsigned int *cflagp, unsigned int *baudp);
static void cp210x_change_speed(struct tty_struct *, struct usb_serial_port *,
struct ktermios *);
static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *,
struct ktermios*);
static int cp210x_tiocmget(struct tty_struct *);
@ -138,6 +140,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
{ USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
{ USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
{ } /* Terminating Entry */
};
@ -201,6 +204,8 @@ static struct usb_serial_driver cp210x_device = {
#define CP210X_EMBED_EVENTS 0x15
#define CP210X_GET_EVENTSTATE 0x16
#define CP210X_SET_CHARS 0x19
#define CP210X_GET_BAUDRATE 0x1D
#define CP210X_SET_BAUDRATE 0x1E
/* CP210X_IFC_ENABLE */
#define UART_ENABLE 0x0001
@ -360,8 +365,8 @@ static inline int cp210x_set_config_single(struct usb_serial_port *port,
* Quantises the baud rate as per AN205 Table 1
*/
static unsigned int cp210x_quantise_baudrate(unsigned int baud) {
if (baud <= 56) baud = 0;
else if (baud <= 300) baud = 300;
if (baud <= 300)
baud = 300;
else if (baud <= 600) baud = 600;
else if (baud <= 1200) baud = 1200;
else if (baud <= 1800) baud = 1800;
@ -389,10 +394,10 @@ static unsigned int cp210x_quantise_baudrate(unsigned int baud) {
else if (baud <= 491520) baud = 460800;
else if (baud <= 567138) baud = 500000;
else if (baud <= 670254) baud = 576000;
else if (baud <= 1053257) baud = 921600;
else if (baud <= 1474560) baud = 1228800;
else if (baud <= 2457600) baud = 1843200;
else baud = 3686400;
else if (baud < 1000000)
baud = 921600;
else if (baud > 2000000)
baud = 2000000;
return baud;
}
@ -409,13 +414,14 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
return result;
}
result = usb_serial_generic_open(tty, port);
if (result)
return result;
/* Configure the termios structure */
cp210x_get_termios(tty, port);
return 0;
/* The baud rate must be initialised on cp2104 */
if (tty)
cp210x_change_speed(tty, port, NULL);
return usb_serial_generic_open(tty, port);
}
static void cp210x_close(struct usb_serial_port *port)
@ -467,10 +473,7 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
dbg("%s - port %d", __func__, port->number);
cp210x_get_config(port, CP210X_GET_BAUDDIV, &baud, 2);
/* Convert to baudrate */
if (baud)
baud = cp210x_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud);
cp210x_get_config(port, CP210X_GET_BAUDRATE, &baud, 4);
dbg("%s - baud rate = %d", __func__, baud);
*baudp = baud;
@ -579,11 +582,64 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
*cflagp = cflag;
}
/*
* CP2101 supports the following baud rates:
*
* 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 14400, 19200, 28800,
* 38400, 56000, 57600, 115200, 128000, 230400, 460800, 921600
*
* CP2102 and CP2103 support the following additional rates:
*
* 4000, 16000, 51200, 64000, 76800, 153600, 250000, 256000, 500000,
* 576000
*
* The device will map a requested rate to a supported one, but the result
* of requests for rates greater than 1053257 is undefined (see AN205).
*
* CP2104, CP2105 and CP2110 support most rates up to 2M, 921k and 1M baud,
* respectively, with an error less than 1%. The actual rates are determined
* by
*
* div = round(freq / (2 x prescale x request))
* actual = freq / (2 x prescale x div)
*
* For CP2104 and CP2105 freq is 48Mhz and prescale is 4 for request <= 365bps
* or 1 otherwise.
* For CP2110 freq is 24Mhz and prescale is 4 for request <= 300bps or 1
* otherwise.
*/
static void cp210x_change_speed(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
u32 baud;
baud = tty->termios->c_ospeed;
/* This maps the requested rate to a rate valid on cp2102 or cp2103,
* or to an arbitrary rate in [1M,2M].
*
* NOTE: B0 is not implemented.
*/
baud = cp210x_quantise_baudrate(baud);
dbg("%s - setting baud rate to %u", __func__, baud);
if (cp210x_set_config(port, CP210X_SET_BAUDRATE, &baud,
sizeof(baud))) {
dev_warn(&port->dev, "failed to set baud rate to %u\n", baud);
if (old_termios)
baud = old_termios->c_ospeed;
else
baud = 9600;
}
tty_encode_baud_rate(tty, baud, baud);
}
static void cp210x_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
unsigned int cflag, old_cflag;
unsigned int baud = 0, bits;
unsigned int bits;
unsigned int modem_ctl[4];
dbg("%s - port %d", __func__, port->number);
@ -593,20 +649,9 @@ static void cp210x_set_termios(struct tty_struct *tty,
cflag = tty->termios->c_cflag;
old_cflag = old_termios->c_cflag;
baud = cp210x_quantise_baudrate(tty_get_baud_rate(tty));
/* If the baud rate is to be updated*/
if (baud != tty_termios_baud_rate(old_termios) && baud != 0) {
dbg("%s - Setting baud rate to %d baud", __func__,
baud);
if (cp210x_set_config_single(port, CP210X_SET_BAUDDIV,
((BAUD_RATE_GEN_FREQ + baud/2) / baud))) {
dbg("Baud rate requested not supported by device");
baud = tty_termios_baud_rate(old_termios);
}
}
/* Report back the resulting baud rate */
tty_encode_baud_rate(tty, baud, baud);
if (tty->termios->c_ospeed != old_termios->c_ospeed)
cp210x_change_speed(tty, port, old_termios);
/* If the number of data bits is to be updated */
if ((cflag & CSIZE) != (old_cflag & CSIZE)) {

14
drivers/usb/serial/ftdi_sio.c
View File

@ -797,6 +797,7 @@ static struct usb_device_id id_table_combined [] = {
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(HORNBY_VID, HORNBY_ELITE_PID) },
{ USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
{ USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
@ -805,6 +806,8 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
{ USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, TI_XDS100V2_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) },
{ USB_DEVICE(FTDI_VID, HAMEG_HO720_PID) },
{ USB_DEVICE(FTDI_VID, HAMEG_HO730_PID) },
@ -841,6 +844,7 @@ static struct usb_device_id id_table_combined [] = {
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(ST_VID, ST_STMCLT1030_PID),
.driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_RF_R106) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
@ -1333,8 +1337,7 @@ static int set_serial_info(struct tty_struct *tty,
goto check_and_exit;
}
if ((new_serial.baud_base != priv->baud_base) &&
(new_serial.baud_base < 9600)) {
if (new_serial.baud_base != priv->baud_base) {
mutex_unlock(&priv->cfg_lock);
return -EINVAL;
}
@ -1824,6 +1827,7 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port)
static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct ktermios dummy;
struct usb_device *dev = port->serial->dev;
struct ftdi_private *priv = usb_get_serial_port_data(port);
int result;
@ -1842,8 +1846,10 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
This is same behaviour as serial.c/rs_open() - Kuba */
/* ftdi_set_termios will send usb control messages */
if (tty)
ftdi_set_termios(tty, port, tty->termios);
if (tty) {
memset(&dummy, 0, sizeof(dummy));
ftdi_set_termios(tty, port, &dummy);
}
/* Start reading from the device */
result = usb_serial_generic_open(tty, port);

19
drivers/usb/serial/ftdi_sio_ids.h
View File

@ -39,6 +39,13 @@
/* www.candapter.com Ewert Energy Systems CANdapter device */
#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
/*
* Texas Instruments XDS100v2 JTAG / BeagleBone A3
* http://processors.wiki.ti.com/index.php/XDS100
* http://beagleboard.org/bone
*/
#define TI_XDS100V2_PID 0xa6d0
#define FTDI_NXTCAM_PID 0xABB8 /* NXTCam for Mindstorms NXT */
/* US Interface Navigator (http://www.usinterface.com/) */
@ -524,6 +531,12 @@
#define ADI_GNICE_PID 0xF000
#define ADI_GNICEPLUS_PID 0xF001
/*
* Hornby Elite
*/
#define HORNBY_VID 0x04D8
#define HORNBY_ELITE_PID 0x000A
/*
* RATOC REX-USB60F
*/
@ -1168,3 +1181,9 @@
*/
/* TagTracer MIFARE*/
#define FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID 0xF7C0
/*
* Rainforest Automation
*/
/* ZigBee controller */
#define FTDI_RF_R106 0x8A28

10
drivers/usb/serial/io_ti.c
View File

@ -2657,15 +2657,7 @@ cleanup:
static void edge_disconnect(struct usb_serial *serial)
{
int i;
struct edgeport_port *edge_port;
dbg("%s", __func__);
for (i = 0; i < serial->num_ports; ++i) {
edge_port = usb_get_serial_port_data(serial->port[i]);
edge_remove_sysfs_attrs(edge_port->port);
}
}
static void edge_release(struct usb_serial *serial)
@ -2744,6 +2736,7 @@ static struct usb_serial_driver edgeport_1port_device = {
.disconnect = edge_disconnect,
.release = edge_release,
.port_probe = edge_create_sysfs_attrs,
.port_remove = edge_remove_sysfs_attrs,
.ioctl = edge_ioctl,
.set_termios = edge_set_termios,
.tiocmget = edge_tiocmget,
@ -2775,6 +2768,7 @@ static struct usb_serial_driver edgeport_2port_device = {
.disconnect = edge_disconnect,
.release = edge_release,
.port_probe = edge_create_sysfs_attrs,
.port_remove = edge_remove_sysfs_attrs,
.ioctl = edge_ioctl,
.set_termios = edge_set_termios,
.tiocmget = edge_tiocmget,

2
drivers/usb/serial/kobil_sct.c
View File

@ -38,7 +38,7 @@
#include <linux/ioctl.h>
#include "kobil_sct.h"
static int debug;
static bool debug;
/* Version Information */
#define DRIVER_VERSION "21/05/2004"

5
drivers/usb/serial/option.c
View File

@ -480,6 +480,10 @@ static void option_instat_callback(struct urb *urb);
#define ZD_VENDOR_ID 0x0685
#define ZD_PRODUCT_7000 0x7000
/* LG products */
#define LG_VENDOR_ID 0x1004
#define LG_PRODUCT_L02C 0x618f
/* some devices interfaces need special handling due to a number of reasons */
enum option_blacklist_reason {
OPTION_BLACKLIST_NONE = 0,
@ -1183,6 +1187,7 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU526) },
{ USB_DEVICE_AND_INTERFACE_INFO(VIETTEL_VENDOR_ID, VIETTEL_PRODUCT_VT1000, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZD_VENDOR_ID, ZD_PRODUCT_7000, 0xff, 0xff, 0xff) },
{ USB_DEVICE(LG_VENDOR_ID, LG_PRODUCT_L02C) }, /* docomo L-02C modem */
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);

7
drivers/usb/serial/qcaux.c
View File

@ -36,6 +36,7 @@
#define UTSTARCOM_PRODUCT_UM175_V1 0x3712
#define UTSTARCOM_PRODUCT_UM175_V2 0x3714
#define UTSTARCOM_PRODUCT_UM175_ALLTEL 0x3715
#define PANTECH_PRODUCT_UML190_VZW 0x3716
#define PANTECH_PRODUCT_UML290_VZW 0x3718
/* CMOTECH devices */
@ -67,7 +68,11 @@ static struct usb_device_id id_table[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(LG_VENDOR_ID, LG_PRODUCT_VX4400_6000, 0xff, 0xff, 0x00) },
{ USB_DEVICE_AND_INTERFACE_INFO(SANYO_VENDOR_ID, SANYO_PRODUCT_KATANA_LX, 0xff, 0xff, 0x00) },
{ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_U520, 0xff, 0x00, 0x00) },
{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML190_VZW, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML190_VZW, 0xff, 0xfe, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xfd, 0xff) }, /* NMEA */
{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xfe, 0xff) }, /* WMC */
{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xff, 0xff) }, /* DIAG */
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);

2
drivers/usb/storage/realtek_cr.c
View File

@ -789,7 +789,7 @@ static void rts51x_suspend_timer_fn(unsigned long data)
rts51x_set_stat(chip, RTS51X_STAT_SS);
/* ignore mass storage interface's children */
pm_suspend_ignore_children(&us->pusb_intf->dev, true);
usb_autopm_put_interface(us->pusb_intf);
usb_autopm_put_interface_async(us->pusb_intf);
US_DEBUGP("%s: RTS51X_STAT_SS 01,"
"intf->pm_usage_cnt:%d, power.usage:%d\n",
__func__,

18
drivers/usb/usb-skeleton.c
View File

@ -27,8 +27,6 @@
#define USB_SKEL_VENDOR_ID 0xfff0
#define USB_SKEL_PRODUCT_ID 0xfff0
static DEFINE_MUTEX(skel_mutex);
/* table of devices that work with this driver */
static const struct usb_device_id skel_table[] = {
{ USB_DEVICE(USB_SKEL_VENDOR_ID, USB_SKEL_PRODUCT_ID) },
@ -101,25 +99,18 @@ static int skel_open(struct inode *inode, struct file *file)
goto exit;
}
mutex_lock(&skel_mutex);
dev = usb_get_intfdata(interface);
if (!dev) {
mutex_unlock(&skel_mutex);
retval = -ENODEV;
goto exit;
}
/* increment our usage count for the device */
kref_get(&dev->kref);
mutex_unlock(&skel_mutex);
/* lock the device to allow correctly handling errors
* in resumption */
mutex_lock(&dev->io_mutex);
if (!dev->interface) {
retval = -ENODEV;
goto out_err;
}
retval = usb_autopm_get_interface(interface);
if (retval)
@ -127,11 +118,7 @@ static int skel_open(struct inode *inode, struct file *file)
/* save our object in the file's private structure */
file->private_data = dev;
out_err:
mutex_unlock(&dev->io_mutex);
if (retval)
kref_put(&dev->kref, skel_delete);
exit:
return retval;
@ -611,6 +598,7 @@ static void skel_disconnect(struct usb_interface *interface)
int minor = interface->minor;
dev = usb_get_intfdata(interface);
usb_set_intfdata(interface, NULL);
/* give back our minor */
usb_deregister_dev(interface, &skel_class);
@ -622,12 +610,8 @@ static void skel_disconnect(struct usb_interface *interface)
usb_kill_anchored_urbs(&dev->submitted);
mutex_lock(&skel_mutex);
usb_set_intfdata(interface, NULL);
/* decrement our usage count */
kref_put(&dev->kref, skel_delete);
mutex_unlock(&skel_mutex);
dev_info(&interface->dev, "USB Skeleton #%d now disconnected", minor);
}

2
drivers/usb/wusbcore/Kconfig
View File

@ -6,7 +6,7 @@ config USB_WUSB
depends on EXPERIMENTAL
depends on USB
depends on PCI
select UWB
depends on UWB
select CRYPTO
select CRYPTO_BLKCIPHER
select CRYPTO_CBC

2
fs/logfs/dir.c
View File

@ -71,7 +71,7 @@ static int write_dir(struct inode *dir, struct logfs_disk_dentry *dd,
static int write_inode(struct inode *inode)
{
return __logfs_write_inode(inode, WF_LOCK);
return __logfs_write_inode(inode, NULL, WF_LOCK);
}
static s64 dir_seek_data(struct inode *inode, s64 pos)

2
fs/logfs/file.c
View File

@ -230,7 +230,9 @@ int logfs_fsync(struct file *file, loff_t start, loff_t end, int datasync)
return ret;
mutex_lock(&inode->i_mutex);
logfs_get_wblocks(sb, NULL, WF_LOCK);
logfs_write_anchor(sb);
logfs_put_wblocks(sb, NULL, WF_LOCK);
mutex_unlock(&inode->i_mutex);
return 0;

2
fs/logfs/gc.c
View File

@ -367,7 +367,7 @@ static struct gc_candidate *get_candidate(struct super_block *sb)
int i, max_dist;
struct gc_candidate *cand = NULL, *this;
max_dist = min(no_free_segments(sb), LOGFS_NO_AREAS);
max_dist = min(no_free_segments(sb), LOGFS_NO_AREAS - 1);
for (i = max_dist; i >= 0; i--) {
this = first_in_list(&super->s_low_list[i]);

4
fs/logfs/inode.c
View File

@ -286,7 +286,7 @@ static int logfs_write_inode(struct inode *inode, struct writeback_control *wbc)
if (logfs_inode(inode)->li_flags & LOGFS_IF_STILLBORN)
return 0;
ret = __logfs_write_inode(inode, flags);
ret = __logfs_write_inode(inode, NULL, flags);
LOGFS_BUG_ON(ret, inode->i_sb);
return ret;
}
@ -363,7 +363,9 @@ static void logfs_init_once(void *_li)
static int logfs_sync_fs(struct super_block *sb, int wait)
{
logfs_get_wblocks(sb, NULL, WF_LOCK);
logfs_write_anchor(sb);
logfs_put_wblocks(sb, NULL, WF_LOCK);
return 0;
}

1
fs/logfs/journal.c
View File

@ -612,7 +612,6 @@ static size_t __logfs_write_je(struct super_block *sb, void *buf, u16 type,
if (len == 0)
return logfs_write_header(super, header, 0, type);
BUG_ON(len > sb->s_blocksize);
compr_len = logfs_compress(buf, data, len, sb->s_blocksize);
if (compr_len < 0 || type == JE_ANCHOR) {
memcpy(data, buf, len);

Some files were not shown because too many files have changed in this diff Show More