ARM: dts: imx23-olinuxino: Fix IOMUX settings

On the imx23-olinuxino board GPIO2_1 is connected to the LED and GPIO0_17
is the USB PHY reset.

So make the IOMUX assignment properly.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
This commit is contained in:
Fabio Estevam 2012-12-24 16:01:39 -02:00 committed by Shawn Guo
parent a49f0d1ea3
commit 664e9e495a
1 changed files with 4 additions and 4 deletions

View File

@ -39,17 +39,17 @@
hog_pins_a: hog@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
led_pin_gpio0_17: led_gpio0_17@0 {
led_pin_gpio2_1: led_gpio2_1@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
@ -110,7 +110,7 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pin_gpio0_17>;
pinctrl-0 = <&led_pin_gpio2_1>;
user {
label = "green";