V4L/DVB (4648): Hauppauge Nova-T 500 support added
This changeset finalizes the support of the Hauppauge Nova-T 500 (Dual DVB-T). It adds correct AGC setting for the 3000P, correct firmware download state detection. Additionally it fixes the mt2060-driver to be able to be used with dvb_attach. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
This commit is contained in:
parent
b7f54910ce
commit
6958effedb
|
@ -32,13 +32,15 @@ extern int dvb_usb_dib0700_debug;
|
||||||
|
|
||||||
struct dib0700_state {
|
struct dib0700_state {
|
||||||
u8 channel_state;
|
u8 channel_state;
|
||||||
u8 mt2060_if1[2];
|
u16 mt2060_if1[2];
|
||||||
};
|
};
|
||||||
|
|
||||||
extern int dib0700_set_gpio(struct dvb_usb_device *, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val);
|
extern int dib0700_set_gpio(struct dvb_usb_device *, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val);
|
||||||
extern int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw);
|
extern int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw);
|
||||||
extern int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff);
|
extern int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff);
|
||||||
extern struct i2c_algorithm dib0700_i2c_algo;
|
extern struct i2c_algorithm dib0700_i2c_algo;
|
||||||
|
extern int dib0700_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props,
|
||||||
|
struct dvb_usb_device_description **desc, int *cold);
|
||||||
|
|
||||||
extern int dib0700_device_count;
|
extern int dib0700_device_count;
|
||||||
extern struct dvb_usb_device_properties dib0700_devices[];
|
extern struct dvb_usb_device_properties dib0700_devices[];
|
||||||
|
|
|
@ -26,7 +26,7 @@ static int dib0700_ctrl_wr(struct dvb_usb_device *d, u8 *tx, u8 txlen)
|
||||||
USB_CTRL_GET_TIMEOUT);
|
USB_CTRL_GET_TIMEOUT);
|
||||||
|
|
||||||
if (status != txlen)
|
if (status != txlen)
|
||||||
err("ep 0 write error (status = %d, len: %d)",status,txlen);
|
deb_data("ep 0 write error (status = %d, len: %d)\n",status,txlen);
|
||||||
|
|
||||||
return status < 0 ? status : 0;
|
return status < 0 ? status : 0;
|
||||||
}
|
}
|
||||||
|
@ -65,7 +65,7 @@ static int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u
|
||||||
USB_CTRL_GET_TIMEOUT);
|
USB_CTRL_GET_TIMEOUT);
|
||||||
|
|
||||||
if (status < 0)
|
if (status < 0)
|
||||||
err("ep 0 read error (status = %d)",status);
|
deb_info("ep 0 read error (status = %d)\n",status);
|
||||||
|
|
||||||
deb_data("<<< ");
|
deb_data("<<< ");
|
||||||
debug_dump(rx,rxlen,deb_data);
|
debug_dump(rx,rxlen,deb_data);
|
||||||
|
@ -130,6 +130,19 @@ struct i2c_algorithm dib0700_i2c_algo = {
|
||||||
.functionality = dib0700_i2c_func,
|
.functionality = dib0700_i2c_func,
|
||||||
};
|
};
|
||||||
|
|
||||||
|
int dib0700_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props,
|
||||||
|
struct dvb_usb_device_description **desc, int *cold)
|
||||||
|
{
|
||||||
|
u8 buf[3] = { REQUEST_SET_GPIO, 4, (GPIO_IN << 7) | (0 << 6) }; // GPIO4 is save - used for I2C
|
||||||
|
*cold = usb_control_msg(udev, usb_sndctrlpipe(udev,0),
|
||||||
|
buf[0], USB_TYPE_VENDOR | USB_DIR_OUT, 0, 0, buf, 3, USB_CTRL_GET_TIMEOUT) != 3;
|
||||||
|
|
||||||
|
deb_info("cold: %d\n", *cold);
|
||||||
|
|
||||||
|
*cold = 0;
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
static int dib0700_jumpram(struct usb_device *udev, u32 address)
|
static int dib0700_jumpram(struct usb_device *udev, u32 address)
|
||||||
{
|
{
|
||||||
int ret, actlen;
|
int ret, actlen;
|
||||||
|
@ -182,8 +195,10 @@ int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw
|
||||||
|
|
||||||
if (ret == 0) {
|
if (ret == 0) {
|
||||||
/* start the firmware */
|
/* start the firmware */
|
||||||
if ((ret = dib0700_jumpram(udev,0x70000000)) == 0)
|
if ((ret = dib0700_jumpram(udev, 0x70000000)) == 0) {
|
||||||
info("firmware started successfully.");
|
info("firmware started successfully.");
|
||||||
|
msleep(100);
|
||||||
|
}
|
||||||
} else
|
} else
|
||||||
ret = -EIO;
|
ret = -EIO;
|
||||||
|
|
||||||
|
|
|
@ -25,24 +25,24 @@ static struct mt2060_config bristol_mt2060_config[2] = {
|
||||||
|
|
||||||
static struct dibx000_agc_config bristol_dib3000p_mt2060_agc_config = {
|
static struct dibx000_agc_config bristol_dib3000p_mt2060_agc_config = {
|
||||||
.band_caps = BAND_VHF | BAND_UHF,
|
.band_caps = BAND_VHF | BAND_UHF,
|
||||||
.setup = (0 << 15) | (0 << 14) | (1 << 13) | (1 << 12) | (29 << 0),
|
.setup = (0 << 15) | (0 << 14) | (0 << 13) | (0 << 12) | (29 << 0),
|
||||||
|
|
||||||
.agc1_max = 48497,
|
.agc1_max = 42598,
|
||||||
.agc1_min = 23593,
|
.agc1_min = 17694,
|
||||||
.agc2_max = 46531,
|
.agc2_max = 45875,
|
||||||
.agc2_min = 24904,
|
.agc2_min = 0,
|
||||||
|
|
||||||
.agc1_pt1 = 0x65,
|
.agc1_pt1 = 0,
|
||||||
.agc1_pt2 = 0x69,
|
.agc1_pt2 = 59,
|
||||||
|
|
||||||
.agc1_slope1 = 0x51,
|
.agc1_slope1 = 0,
|
||||||
.agc1_slope2 = 0x27,
|
.agc1_slope2 = 69,
|
||||||
|
|
||||||
.agc2_pt1 = 0,
|
.agc2_pt1 = 0,
|
||||||
.agc2_pt2 = 0x33,
|
.agc2_pt2 = 59,
|
||||||
|
|
||||||
.agc2_slope1 = 0x35,
|
.agc2_slope1 = 111,
|
||||||
.agc2_slope2 = 0x37,
|
.agc2_slope2 = 28,
|
||||||
};
|
};
|
||||||
|
|
||||||
static struct dib3000mc_config bristol_dib3000mc_config[2] = {
|
static struct dib3000mc_config bristol_dib3000mc_config[2] = {
|
||||||
|
@ -60,25 +60,31 @@ static struct dib3000mc_config bristol_dib3000mc_config[2] = {
|
||||||
|
|
||||||
static int bristol_frontend_attach(struct dvb_usb_adapter *adap)
|
static int bristol_frontend_attach(struct dvb_usb_adapter *adap)
|
||||||
{
|
{
|
||||||
|
struct dib0700_state *st = adap->dev->priv;
|
||||||
if (adap->id == 0) {
|
if (adap->id == 0) {
|
||||||
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10);
|
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10);
|
||||||
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10);
|
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10);
|
||||||
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10);
|
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10);
|
||||||
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(10);
|
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(10);
|
||||||
|
|
||||||
|
dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); msleep(10); // LNA
|
||||||
|
|
||||||
if (dib3000mc_i2c_enumeration(&adap->dev->i2c_adap, 2, DEFAULT_DIB3000P_I2C_ADDRESS, bristol_dib3000mc_config) != 0) {
|
if (dib3000mc_i2c_enumeration(&adap->dev->i2c_adap, 2, DEFAULT_DIB3000P_I2C_ADDRESS, bristol_dib3000mc_config) != 0) {
|
||||||
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10);
|
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10);
|
||||||
return -ENODEV;
|
return -ENODEV;
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
return (adap->fe = dvb_attach(dib3000mc_attach, &adap->dev->i2c_adap, 10 + adap->id, &bristol_dib3000mc_config[adap->id])) == NULL ? -ENODEV : 0;
|
st->mt2060_if1[adap->id] = 1220;
|
||||||
|
return (adap->fe = dvb_attach(dib3000mc_attach, &adap->dev->i2c_adap,
|
||||||
|
(10 + adap->id) << 1, &bristol_dib3000mc_config[adap->id])) == NULL ? -ENODEV : 0;
|
||||||
}
|
}
|
||||||
|
|
||||||
static int bristol_tuner_attach(struct dvb_usb_adapter *adap)
|
static int bristol_tuner_attach(struct dvb_usb_adapter *adap)
|
||||||
{
|
{
|
||||||
struct dib0700_state *st = adap->dev->priv;
|
struct dib0700_state *st = adap->dev->priv;
|
||||||
struct i2c_adapter *tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe, 1);
|
struct i2c_adapter *tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe, 1);
|
||||||
return mt2060_attach(adap->fe, tun_i2c, &bristol_mt2060_config[adap->id], st->mt2060_if1[adap->id]);
|
return dvb_attach(mt2060_attach,adap->fe, tun_i2c, &bristol_mt2060_config[adap->id],
|
||||||
|
st->mt2060_if1[adap->id]) == NULL ? -ENODEV : 0;
|
||||||
}
|
}
|
||||||
|
|
||||||
/* STK7700P: Hauppauge Nova-T Stick, AVerMedia Volar */
|
/* STK7700P: Hauppauge Nova-T Stick, AVerMedia Volar */
|
||||||
|
@ -119,8 +125,10 @@ MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
|
||||||
.usb_ctrl = DEVICE_SPECIFIC, \
|
.usb_ctrl = DEVICE_SPECIFIC, \
|
||||||
.firmware = "dvb-usb-dib0700-01.fw", \
|
.firmware = "dvb-usb-dib0700-01.fw", \
|
||||||
.download_firmware = dib0700_download_firmware, \
|
.download_firmware = dib0700_download_firmware, \
|
||||||
|
.no_reconnect = 1, \
|
||||||
.size_of_priv = sizeof(struct dib0700_state), \
|
.size_of_priv = sizeof(struct dib0700_state), \
|
||||||
.i2c_algo = &dib0700_i2c_algo
|
.i2c_algo = &dib0700_i2c_algo, \
|
||||||
|
.identify_state = dib0700_identify_state
|
||||||
|
|
||||||
#define DIB0700_DEFAULT_STREAMING_CONFIG(ep) \
|
#define DIB0700_DEFAULT_STREAMING_CONFIG(ep) \
|
||||||
.streaming_ctrl = dib0700_streaming_ctrl, \
|
.streaming_ctrl = dib0700_streaming_ctrl, \
|
||||||
|
|
|
@ -80,6 +80,7 @@ int dvb_usb_download_firmware(struct usb_device *udev, struct dvb_usb_device_pro
|
||||||
int ret;
|
int ret;
|
||||||
const struct firmware *fw = NULL;
|
const struct firmware *fw = NULL;
|
||||||
|
|
||||||
|
|
||||||
if ((ret = request_firmware(&fw, props->firmware, &udev->dev)) != 0) {
|
if ((ret = request_firmware(&fw, props->firmware, &udev->dev)) != 0) {
|
||||||
err("did not find the firmware file. (%s) "
|
err("did not find the firmware file. (%s) "
|
||||||
"Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)",
|
"Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)",
|
||||||
|
|
|
@ -94,8 +94,8 @@
|
||||||
#define USB_PID_WT220U_ZL0353_WARM 0x022b
|
#define USB_PID_WT220U_ZL0353_WARM 0x022b
|
||||||
#define USB_PID_WINTV_NOVA_T_USB2_COLD 0x9300
|
#define USB_PID_WINTV_NOVA_T_USB2_COLD 0x9300
|
||||||
#define USB_PID_WINTV_NOVA_T_USB2_WARM 0x9301
|
#define USB_PID_WINTV_NOVA_T_USB2_WARM 0x9301
|
||||||
#define USB_PID_HAUPPAUGE_NOVA_T_500 0x1234
|
#define USB_PID_HAUPPAUGE_NOVA_T_500 0x9941
|
||||||
#define USB_PID_HAUPPAUGE_NOVA_T_STICK 0x1234
|
#define USB_PID_HAUPPAUGE_NOVA_T_STICK 0x7050
|
||||||
#define USB_PID_AVERMEDIA_VOLAR 0x1234
|
#define USB_PID_AVERMEDIA_VOLAR 0x1234
|
||||||
#define USB_PID_NEBULA_DIGITV 0x0201
|
#define USB_PID_NEBULA_DIGITV 0x0201
|
||||||
#define USB_PID_DVICO_BLUEBIRD_LGDT 0xd820
|
#define USB_PID_DVICO_BLUEBIRD_LGDT 0xd820
|
||||||
|
|
|
@ -830,6 +830,7 @@ struct dvb_frontend * dib3000mc_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr
|
||||||
|
|
||||||
st->cfg = cfg;
|
st->cfg = cfg;
|
||||||
st->i2c_adap = i2c_adap;
|
st->i2c_adap = i2c_adap;
|
||||||
|
st->i2c_addr = i2c_addr;
|
||||||
|
|
||||||
demod = &st->demod;
|
demod = &st->demod;
|
||||||
demod->demodulator_priv = st;
|
demod->demodulator_priv = st;
|
||||||
|
|
|
@ -332,14 +332,14 @@ static const struct dvb_tuner_ops mt2060_tuner_ops = {
|
||||||
};
|
};
|
||||||
|
|
||||||
/* This functions tries to identify a MT2060 tuner by reading the PART/REV register. This is hasty. */
|
/* This functions tries to identify a MT2060 tuner by reading the PART/REV register. This is hasty. */
|
||||||
int mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2060_config *cfg, u16 if1)
|
struct dvb_frontend * mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2060_config *cfg, u16 if1)
|
||||||
{
|
{
|
||||||
struct mt2060_priv *priv = NULL;
|
struct mt2060_priv *priv = NULL;
|
||||||
u8 id = 0;
|
u8 id = 0;
|
||||||
|
|
||||||
priv = kzalloc(sizeof(struct mt2060_priv), GFP_KERNEL);
|
priv = kzalloc(sizeof(struct mt2060_priv), GFP_KERNEL);
|
||||||
if (priv == NULL)
|
if (priv == NULL)
|
||||||
return -ENOMEM;
|
return NULL;
|
||||||
|
|
||||||
priv->cfg = cfg;
|
priv->cfg = cfg;
|
||||||
priv->i2c = i2c;
|
priv->i2c = i2c;
|
||||||
|
@ -347,12 +347,12 @@ int mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt206
|
||||||
|
|
||||||
if (mt2060_readreg(priv,REG_PART_REV,&id) != 0) {
|
if (mt2060_readreg(priv,REG_PART_REV,&id) != 0) {
|
||||||
kfree(priv);
|
kfree(priv);
|
||||||
return -ENODEV;
|
return NULL;
|
||||||
}
|
}
|
||||||
|
|
||||||
if (id != PART_REV) {
|
if (id != PART_REV) {
|
||||||
kfree(priv);
|
kfree(priv);
|
||||||
return -ENODEV;
|
return NULL;
|
||||||
}
|
}
|
||||||
printk(KERN_INFO "MT2060: successfully identified (IF1 = %d)\n", if1);
|
printk(KERN_INFO "MT2060: successfully identified (IF1 = %d)\n", if1);
|
||||||
memcpy(&fe->ops.tuner_ops, &mt2060_tuner_ops, sizeof(struct dvb_tuner_ops));
|
memcpy(&fe->ops.tuner_ops, &mt2060_tuner_ops, sizeof(struct dvb_tuner_ops));
|
||||||
|
@ -361,7 +361,7 @@ int mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt206
|
||||||
|
|
||||||
mt2060_calibrate(priv);
|
mt2060_calibrate(priv);
|
||||||
|
|
||||||
return 0;
|
return fe;
|
||||||
}
|
}
|
||||||
EXPORT_SYMBOL(mt2060_attach);
|
EXPORT_SYMBOL(mt2060_attach);
|
||||||
|
|
||||||
|
|
|
@ -30,6 +30,6 @@ struct mt2060_config {
|
||||||
u8 clock_out; /* 0 = off, 1 = CLK/1, 2 = CLK/2, 3 = CLK/4 */
|
u8 clock_out; /* 0 = off, 1 = CLK/1, 2 = CLK/2, 3 = CLK/4 */
|
||||||
};
|
};
|
||||||
|
|
||||||
extern int mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2060_config *cfg, u16 if1);
|
extern struct dvb_frontend * mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2060_config *cfg, u16 if1);
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
|
|
Loading…
Reference in New Issue