ARM: 6129/1: Gemini: add support for Wiliboard WBD-222

Depends on patch # 6128

Add support for Wiliboard WBD-222.
supported devices on SoC
- GPIO with led und keys
- UART
- PFLASH, set fixed partition table

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Hans Ulli Kroll 2010-05-13 06:34:29 +01:00 committed by Russell King
parent bd0f9a3ff4
commit 6a5f0d3a78
3 changed files with 151 additions and 0 deletions

View File

@ -16,6 +16,13 @@ config MACH_WBD111
Say Y here if you intend to run this kernel on a
Wiliboard WBD-111.
config MACH_WBD222
bool "Wiliboard WBD-222"
select GEMINI_MEM_SWAP
help
Say Y here if you intend to run this kernel on a
Wiliboard WBD-222.
endmenu
config GEMINI_MEM_SWAP

View File

@ -9,3 +9,4 @@ obj-y := irq.o mm.o time.o devices.o gpio.o
# Board-specific support
obj-$(CONFIG_MACH_RUT100) += board-rut1xx.o
obj-$(CONFIG_MACH_WBD111) += board-wbd111.o
obj-$(CONFIG_MACH_WBD222) += board-wbd222.o

View File

@ -0,0 +1,143 @@
/*
* Support for Wiliboard WBD-222
*
* Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/input.h>
#include <linux/skbuff.h>
#include <linux/gpio_keys.h>
#include <linux/mdio-gpio.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include "common.h"
static struct gpio_keys_button wbd222_keys[] = {
{
.code = KEY_SETUP,
.gpio = 5,
.active_low = 1,
.desc = "reset",
.type = EV_KEY,
},
};
static struct gpio_keys_platform_data wbd222_keys_data = {
.buttons = wbd222_keys,
.nbuttons = ARRAY_SIZE(wbd222_keys),
};
static struct platform_device wbd222_keys_device = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &wbd222_keys_data,
},
};
static struct gpio_led wbd222_leds[] = {
{
.name = "L3red",
.gpio = 1,
},
{
.name = "L4green",
.gpio = 2,
},
{
.name = "L4red",
.gpio = 3,
},
{
.name = "L3green",
.gpio = 5,
},
};
static struct gpio_led_platform_data wbd222_leds_data = {
.num_leds = ARRAY_SIZE(wbd222_leds),
.leds = wbd222_leds,
};
static struct platform_device wbd222_leds_device = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &wbd222_leds_data,
},
};
static struct sys_timer wbd222_timer = {
.init = gemini_timer_init,
};
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition wbd222_partitions[] = {
{
.name = "RedBoot",
.offset = 0,
.size = 0x020000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "kernel",
.offset = 0x020000,
.size = 0x100000,
} , {
.name = "rootfs",
.offset = 0x120000,
.size = 0x6a0000,
} , {
.name = "VCTL",
.offset = 0x7c0000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "cfg",
.offset = 0x7d0000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "FIS",
.offset = 0x7e0000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
}
};
#define wbd222_num_partitions ARRAY_SIZE(wbd222_partitions)
#else
#define wbd222_partitions NULL
#define wbd222_num_partitions 0
#endif /* CONFIG_MTD_PARTITIONS */
static void __init wbd222_init(void)
{
gemini_gpio_init();
platform_register_uart();
platform_register_pflash(SZ_8M, wbd222_partitions,
wbd222_num_partitions);
platform_device_register(&wbd222_leds_device);
platform_device_register(&wbd222_keys_device);
}
MACHINE_START(WBD222, "Wiliboard WBD-222")
.phys_io = 0x7fffc000,
.io_pg_offst = ((0xffffc000) >> 18) & 0xfffc,
.boot_params = 0x100,
.map_io = gemini_map_io,
.init_irq = gemini_init_irq,
.timer = &wbd222_timer,
.init_machine = wbd222_init,
MACHINE_END