[PATCH] skge: led toggle cleanup

Cleanup code that is used to toggle LED's. Since we
get called from ethtool, can use that thread rather than
setting up a timer.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
This commit is contained in:
Stephen Hemminger 2005-07-22 16:26:10 -07:00 committed by Jeff Garzik
parent 4cde06ed0f
commit 6abebb538d
2 changed files with 79 additions and 103 deletions

View File

@ -55,7 +55,7 @@
#define ETH_JUMBO_MTU 9000
#define TX_WATCHDOG (5 * HZ)
#define NAPI_WEIGHT 64
#define BLINK_HZ (HZ/4)
#define BLINK_MS 250
MODULE_DESCRIPTION("SysKonnect Gigabit Ethernet driver");
MODULE_AUTHOR("Stephen Hemminger <shemminger@osdl.org>");
@ -619,19 +619,63 @@ static int skge_set_coalesce(struct net_device *dev,
return 0;
}
static void skge_led_on(struct skge_hw *hw, int port)
enum led_mode { LED_MODE_OFF, LED_MODE_ON, LED_MODE_TST };
static void skge_led(struct skge_port *skge, enum led_mode mode)
{
if (hw->chip_id == CHIP_ID_GENESIS) {
skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_ON);
skge_write8(hw, B0_LED, LED_STAT_ON);
struct skge_hw *hw = skge->hw;
int port = skge->port;
spin_lock_bh(&hw->phy_lock);
if (hw->chip_id == CHIP_ID_GENESIS) {
switch (mode) {
case LED_MODE_OFF:
xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_OFF);
skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF);
skge_write32(hw, SK_REG(port, RX_LED_VAL), 0);
skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_T_OFF);
break;
case LED_MODE_ON:
skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_ON);
skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_LINKSYNC_ON);
skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_START);
skge_write8(hw, SK_REG(port, TX_LED_CTRL), LED_START);
break;
case LED_MODE_TST:
skge_write8(hw, SK_REG(port, RX_LED_TST), LED_T_ON);
skge_write32(hw, SK_REG(port, RX_LED_VAL), 100);
skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_START);
/* For Broadcom Phy only */
xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_ON);
break;
}
} else {
switch (mode) {
case LED_MODE_OFF:
gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
gm_phy_write(hw, port, PHY_MARV_LED_OVER,
PHY_M_LED_MO_DUP(MO_LED_OFF) |
PHY_M_LED_MO_10(MO_LED_OFF) |
PHY_M_LED_MO_100(MO_LED_OFF) |
PHY_M_LED_MO_1000(MO_LED_OFF) |
PHY_M_LED_MO_RX(MO_LED_OFF));
break;
case LED_MODE_ON:
gm_phy_write(hw, port, PHY_MARV_LED_CTRL,
PHY_M_LED_PULS_DUR(PULS_170MS) |
PHY_M_LED_BLINK_RT(BLINK_84MS) |
PHY_M_LEDC_TX_CTRL |
PHY_M_LEDC_DP_CTRL);
gm_phy_write(hw, port, PHY_MARV_LED_OVER,
PHY_M_LED_MO_RX(MO_LED_OFF) |
(skge->speed == SPEED_100 ?
PHY_M_LED_MO_100(MO_LED_ON) : 0));
break;
case LED_MODE_TST:
gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
gm_phy_write(hw, port, PHY_MARV_LED_OVER,
PHY_M_LED_MO_DUP(MO_LED_ON) |
@ -641,61 +685,32 @@ static void skge_led_on(struct skge_hw *hw, int port)
PHY_M_LED_MO_RX(MO_LED_ON));
}
}
static void skge_led_off(struct skge_hw *hw, int port)
{
if (hw->chip_id == CHIP_ID_GENESIS) {
skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF);
skge_write8(hw, B0_LED, LED_STAT_OFF);
skge_write32(hw, SK_REG(port, RX_LED_VAL), 0);
skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_T_OFF);
/* Broadcom only */
xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_OFF);
} else {
gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
gm_phy_write(hw, port, PHY_MARV_LED_OVER,
PHY_M_LED_MO_DUP(MO_LED_OFF) |
PHY_M_LED_MO_10(MO_LED_OFF) |
PHY_M_LED_MO_100(MO_LED_OFF) |
PHY_M_LED_MO_1000(MO_LED_OFF) |
PHY_M_LED_MO_RX(MO_LED_OFF));
}
}
static void skge_blink_timer(unsigned long data)
{
struct skge_port *skge = (struct skge_port *) data;
struct skge_hw *hw = skge->hw;
spin_lock_bh(&hw->phy_lock);
if (skge->blink_on)
skge_led_on(hw, skge->port);
else
skge_led_off(hw, skge->port);
spin_unlock_bh(&hw->phy_lock);
skge->blink_on = !skge->blink_on;
mod_timer(&skge->led_blink, jiffies + BLINK_HZ);
}
/* blink LED's for finding board */
static int skge_phys_id(struct net_device *dev, u32 data)
{
struct skge_port *skge = netdev_priv(dev);
unsigned long ms;
enum led_mode mode = LED_MODE_TST;
if (!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ))
data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ);
ms = jiffies_to_msecs(MAX_SCHEDULE_TIMEOUT / HZ) * 1000;
else
ms = data * 1000;
/* start blinking */
skge->blink_on = 1;
mod_timer(&skge->led_blink, jiffies+1);
while (ms > 0) {
skge_led(skge, mode);
mode ^= LED_MODE_TST;
msleep_interruptible(data * 1000);
del_timer_sync(&skge->led_blink);
if (msleep_interruptible(BLINK_MS))
break;
ms -= BLINK_MS;
}
skge_led_off(skge->hw, skge->port);
/* back to regular LED state */
skge_led(skge, netif_running(dev) ? LED_MODE_ON : LED_MODE_OFF);
return 0;
}
@ -1192,13 +1207,6 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
xm_write16(hw, port, XM_STAT_CMD,
XM_SC_CLR_RXC | XM_SC_CLR_TXC);
/* initialize Rx, Tx and Link LED */
skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_ON);
skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_LINKSYNC_ON);
skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_START);
skge_write8(hw, SK_REG(port, TX_LED_CTRL), LED_START);
/* Unreset the XMAC. */
skge_write16(hw, SK_REG(port, TX_MFF_CTRL1), MFF_CLR_MAC_RST);
@ -1565,7 +1573,6 @@ static void yukon_init(struct skge_hw *hw, int port)
{
struct skge_port *skge = netdev_priv(hw->dev[port]);
u16 ctrl, ct1000, adv;
u16 ledctrl, ledover;
pr_debug("yukon_init\n");
if (skge->autoneg == AUTONEG_ENABLE) {
@ -1637,27 +1644,6 @@ static void yukon_init(struct skge_hw *hw, int port)
gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, adv);
gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl);
/* Setup Phy LED's */
ledctrl = PHY_M_LED_PULS_DUR(PULS_170MS);
ledover = 0;
ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL;
/* turn off the Rx LED (LED_RX) */
ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
/* disable blink mode (LED_DUPLEX) on collisions */
ctrl |= PHY_M_LEDC_DP_CTRL;
gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
if (skge->autoneg == AUTONEG_DISABLE || skge->speed == SPEED_100) {
/* turn on 100 Mbps LED (LED_LINK100) */
ledover |= PHY_M_LED_MO_100(MO_LED_ON);
}
if (ledover)
gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
/* Enable phy interrupt on autonegotiation complete (or link up) */
if (skge->autoneg == AUTONEG_ENABLE)
gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_MSK);
@ -2115,6 +2101,7 @@ static int skge_up(struct net_device *dev)
/* Start receiver BMU */
wmb();
skge_write8(hw, Q_ADDR(rxqaddr[port], Q_CSR), CSR_START | CSR_IRQ_CL_F);
skge_led(skge, LED_MODE_ON);
pr_debug("skge_up completed\n");
return 0;
@ -2139,8 +2126,6 @@ static int skge_down(struct net_device *dev)
netif_stop_queue(dev);
del_timer_sync(&skge->led_blink);
/* Stop transmitter */
skge_write8(hw, Q_ADDR(txqaddr[port], Q_CSR), CSR_STOP);
skge_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL),
@ -2174,15 +2159,12 @@ static int skge_down(struct net_device *dev)
if (hw->chip_id == CHIP_ID_GENESIS) {
skge_write8(hw, SK_REG(port, TX_MFF_CTRL2), MFF_RST_SET);
skge_write8(hw, SK_REG(port, RX_MFF_CTRL2), MFF_RST_SET);
skge_write8(hw, SK_REG(port, TX_LED_CTRL), LED_STOP);
skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_STOP);
} else {
skge_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
skge_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
}
/* turn off led's */
skge_write16(hw, B0_LED, LED_STAT_OFF);
skge_led(skge, LED_MODE_OFF);
skge_tx_clean(skge);
skge_rx_clean(skge);
@ -3088,10 +3070,6 @@ static struct net_device *skge_devinit(struct skge_hw *hw, int port,
spin_lock_init(&skge->tx_lock);
init_timer(&skge->led_blink);
skge->led_blink.function = skge_blink_timer;
skge->led_blink.data = (unsigned long) skge;
if (hw->chip_id != CHIP_ID_GENESIS) {
dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
skge->rx_csum = 1;

View File

@ -2507,8 +2507,6 @@ struct skge_port {
dma_addr_t dma;
unsigned long mem_size;
unsigned int rx_buf_size;
struct timer_list led_blink;
};