diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi index 799ad1889b51..773ef484037a 100644 --- a/arch/arm/boot/dts/at91sam9g20.dtsi +++ b/arch/arm/boot/dts/at91sam9g20.dtsi @@ -55,7 +55,6 @@ #interrupt-cells = <2>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; - interrupt-parent; reg = <0xfffff000 0x200>; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 9e6eb6ecea0e..c8042147eaa2 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -56,7 +56,6 @@ #interrupt-cells = <2>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; - interrupt-parent; reg = <0xfffff000 0x200>; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 70ab3a4e026f..dd4ed748469a 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -54,7 +54,6 @@ #interrupt-cells = <2>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; - interrupt-parent; reg = <0xfffff000 0x200>; }; diff --git a/arch/arm/boot/dts/db8500.dtsi b/arch/arm/boot/dts/db8500.dtsi index d73dce645667..14bc30705099 100644 --- a/arch/arm/boot/dts/db8500.dtsi +++ b/arch/arm/boot/dts/db8500.dtsi @@ -24,7 +24,6 @@ #interrupt-cells = <3>; #address-cells = <1>; interrupt-controller; - interrupt-parent; reg = <0xa0411000 0x1000>, <0xa0410100 0x100>; }; diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts index 37c0ff9c8b90..83e72294aefb 100644 --- a/arch/arm/boot/dts/highbank.dts +++ b/arch/arm/boot/dts/highbank.dts @@ -89,7 +89,6 @@ #size-cells = <0>; #address-cells = <1>; interrupt-controller; - interrupt-parent; reg = <0xfff11000 0x1000>, <0xfff10100 0x100>; }; diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 0491ceef1cda..e81c35f936b5 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -368,6 +368,7 @@ comment "Flattened Device Tree based board for EXYNOS SoCs" config MACH_EXYNOS4_DT bool "Samsung Exynos4 Machine using device tree" + depends on ARCH_EXYNOS4 select CPU_EXYNOS4210 select USE_OF select ARM_AMBA @@ -380,6 +381,7 @@ config MACH_EXYNOS4_DT config MACH_EXYNOS5_DT bool "SAMSUNG EXYNOS5 Machine using device tree" + depends on ARCH_EXYNOS5 select SOC_EXYNOS5250 select USE_OF select ARM_AMBA diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h index 9bee8535d9e0..591e78521a9f 100644 --- a/arch/arm/mach-exynos/include/mach/irqs.h +++ b/arch/arm/mach-exynos/include/mach/irqs.h @@ -212,6 +212,8 @@ #define IRQ_MFC EXYNOS4_IRQ_MFC #define IRQ_SDO EXYNOS4_IRQ_SDO +#define IRQ_I2S0 EXYNOS4_IRQ_I2S0 + #define IRQ_ADC EXYNOS4_IRQ_ADC0 #define IRQ_TC EXYNOS4_IRQ_PEN0 diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index 024d38ff1718..6e6d11ff352a 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -89,6 +89,10 @@ #define EXYNOS4_PA_MDMA1 0x12840000 #define EXYNOS4_PA_PDMA0 0x12680000 #define EXYNOS4_PA_PDMA1 0x12690000 +#define EXYNOS5_PA_MDMA0 0x10800000 +#define EXYNOS5_PA_MDMA1 0x11C10000 +#define EXYNOS5_PA_PDMA0 0x121A0000 +#define EXYNOS5_PA_PDMA1 0x121B0000 #define EXYNOS4_PA_SYSMMU_MDMA 0x10A40000 #define EXYNOS4_PA_SYSMMU_SSS 0x10A50000 diff --git a/arch/arm/mach-exynos/include/mach/regs-clock.h b/arch/arm/mach-exynos/include/mach/regs-clock.h index e141c1fd68d8..d9578a58ae7f 100644 --- a/arch/arm/mach-exynos/include/mach/regs-clock.h +++ b/arch/arm/mach-exynos/include/mach/regs-clock.h @@ -255,9 +255,15 @@ /* For EXYNOS5250 */ +#define EXYNOS5_APLL_LOCK EXYNOS_CLKREG(0x00000) #define EXYNOS5_APLL_CON0 EXYNOS_CLKREG(0x00100) #define EXYNOS5_CLKSRC_CPU EXYNOS_CLKREG(0x00200) +#define EXYNOS5_CLKMUX_STATCPU EXYNOS_CLKREG(0x00400) #define EXYNOS5_CLKDIV_CPU0 EXYNOS_CLKREG(0x00500) +#define EXYNOS5_CLKDIV_CPU1 EXYNOS_CLKREG(0x00504) +#define EXYNOS5_CLKDIV_STATCPU0 EXYNOS_CLKREG(0x00600) +#define EXYNOS5_CLKDIV_STATCPU1 EXYNOS_CLKREG(0x00604) + #define EXYNOS5_MPLL_CON0 EXYNOS_CLKREG(0x04100) #define EXYNOS5_CLKSRC_CORE1 EXYNOS_CLKREG(0x04204) diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c index 0d26f50081ad..4711c8920e37 100644 --- a/arch/arm/mach-exynos/mach-exynos5-dt.c +++ b/arch/arm/mach-exynos/mach-exynos5-dt.c @@ -45,7 +45,7 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = { "exynos4210-uart.3", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL), - OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.2", NULL), + OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL), {}, }; diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index b3982c867c9c..b4f1f902ce6d 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -307,49 +307,7 @@ static struct i2c_board_info i2c1_devs[] __initdata = { }; /* TSP */ -static u8 mxt_init_vals[] = { - /* MXT_GEN_COMMAND(6) */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - /* MXT_GEN_POWER(7) */ - 0x20, 0xff, 0x32, - /* MXT_GEN_ACQUIRE(8) */ - 0x0a, 0x00, 0x05, 0x00, 0x00, 0x00, 0x09, 0x23, - /* MXT_TOUCH_MULTI(9) */ - 0x00, 0x00, 0x00, 0x13, 0x0b, 0x00, 0x00, 0x00, 0x02, 0x00, - 0x00, 0x01, 0x01, 0x0e, 0x0a, 0x0a, 0x0a, 0x0a, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, - /* MXT_TOUCH_KEYARRAY(15) */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, - 0x00, - /* MXT_SPT_GPIOPWM(19) */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - /* MXT_PROCI_GRIPFACE(20) */ - 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x28, 0x04, - 0x0f, 0x0a, - /* MXT_PROCG_NOISE(22) */ - 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x23, 0x00, - 0x00, 0x05, 0x0f, 0x19, 0x23, 0x2d, 0x03, - /* MXT_TOUCH_PROXIMITY(23) */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, - /* MXT_PROCI_ONETOUCH(24) */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - /* MXT_SPT_SELFTEST(25) */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, - /* MXT_PROCI_TWOTOUCH(27) */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - /* MXT_SPT_CTECONFIG(28) */ - 0x00, 0x00, 0x02, 0x08, 0x10, 0x00, -}; - static struct mxt_platform_data mxt_platform_data = { - .config = mxt_init_vals, - .config_length = ARRAY_SIZE(mxt_init_vals), - .x_line = 18, .y_line = 11, .x_size = 1024, @@ -571,7 +529,7 @@ static struct regulator_init_data __initdata max8997_ldo7_data = { static struct regulator_init_data __initdata max8997_ldo8_data = { .constraints = { - .name = "VUSB/VDAC_3.3V_C210", + .name = "VUSB+VDAC_3.3V_C210", .min_uV = 3300000, .max_uV = 3300000, .valid_ops_mask = REGULATOR_CHANGE_STATUS, @@ -1347,6 +1305,7 @@ static struct platform_device *nuri_devices[] __initdata = { static void __init nuri_map_io(void) { + clk_xusbxti.rate = 24000000; exynos_init_io(NULL, 0); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs)); @@ -1379,7 +1338,6 @@ static void __init nuri_machine_init(void) nuri_camera_init(); nuri_ehci_init(); - clk_xusbxti.rate = 24000000; /* Last */ platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices)); diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 6bb9dbdd73fd..7ebf79c2ab34 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -29,6 +29,7 @@ #include #include +#include #include #include #include @@ -1057,6 +1058,7 @@ static struct platform_device *universal_devices[] __initdata = { static void __init universal_map_io(void) { + clk_xusbxti.rate = 24000000; exynos_init_io(NULL, 0); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs)); diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c index 3698a370d636..26aac363a064 100644 --- a/arch/arm/mach-msm/board-halibut.c +++ b/arch/arm/mach-msm/board-halibut.c @@ -86,9 +86,6 @@ static void __init halibut_init(void) static void __init halibut_fixup(struct tag *tags, char **cmdline, struct meminfo *mi) { - mi->nr_banks=1; - mi->bank[0].start = PHYS_OFFSET; - mi->bank[0].size = (101*1024*1024); } static void __init halibut_map_io(void) diff --git a/arch/arm/mach-msm/board-trout-panel.c b/arch/arm/mach-msm/board-trout-panel.c index 25105c1027fe..89bf6b426699 100644 --- a/arch/arm/mach-msm/board-trout-panel.c +++ b/arch/arm/mach-msm/board-trout-panel.c @@ -12,6 +12,7 @@ #include #include +#include #include #include diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c index 5414f76ec0a9..d4060a37e23d 100644 --- a/arch/arm/mach-msm/board-trout.c +++ b/arch/arm/mach-msm/board-trout.c @@ -19,6 +19,7 @@ #include #include +#include #include #include #include diff --git a/arch/arm/mach-msm/proc_comm.c b/arch/arm/mach-msm/proc_comm.c index 67e701c7f183..9980dc736e7b 100644 --- a/arch/arm/mach-msm/proc_comm.c +++ b/arch/arm/mach-msm/proc_comm.c @@ -121,7 +121,7 @@ int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2) * and unknown state. This function should be called early to * wait on the ARM9. */ -void __init proc_comm_boot_wait(void) +void __devinit proc_comm_boot_wait(void) { void __iomem *base = MSM_SHARED_RAM_BASE; diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c index 7072e0d651b1..3d9d746b221a 100644 --- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c +++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c @@ -165,83 +165,3 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate) return 0; } - -#ifdef CONFIG_CPU_FREQ -/* - * Walk PRCM rate table and fillout cpufreq freq_table - * XXX This should be replaced by an OPP layer in the near future - */ -static struct cpufreq_frequency_table *freq_table; - -void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table) -{ - const struct prcm_config *prcm; - int i = 0; - int tbl_sz = 0; - - if (!cpu_is_omap24xx()) - return; - - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - if (prcm->xtal_speed != sclk->rate) - continue; - - /* don't put bypass rates in table */ - if (prcm->dpll_speed == prcm->xtal_speed) - continue; - - tbl_sz++; - } - - /* - * XXX Ensure that we're doing what CPUFreq expects for this error - * case and the following one - */ - if (tbl_sz == 0) { - pr_warning("%s: no matching entries in rate_table\n", - __func__); - return; - } - - /* Include the CPUFREQ_TABLE_END terminator entry */ - tbl_sz++; - - freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * tbl_sz, - GFP_ATOMIC); - if (!freq_table) { - pr_err("%s: could not kzalloc frequency table\n", __func__); - return; - } - - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - if (prcm->xtal_speed != sclk->rate) - continue; - - /* don't put bypass rates in table */ - if (prcm->dpll_speed == prcm->xtal_speed) - continue; - - freq_table[i].index = i; - freq_table[i].frequency = prcm->mpu_speed / 1000; - i++; - } - - freq_table[i].index = i; - freq_table[i].frequency = CPUFREQ_TABLE_END; - - *table = &freq_table[0]; -} - -void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table) -{ - if (!cpu_is_omap24xx()) - return; - - kfree(freq_table); -} - -#endif diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index f57ed5baeccf..d9f4931513f9 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -536,10 +536,5 @@ struct clk_functions omap2_clk_functions = { .clk_set_rate = omap2_clk_set_rate, .clk_set_parent = omap2_clk_set_parent, .clk_disable_unused = omap2_clk_disable_unused, -#ifdef CONFIG_CPU_FREQ - /* These will be removed when the OPP code is integrated */ - .clk_init_cpufreq_table = omap2_clk_init_cpufreq_table, - .clk_exit_cpufreq_table = omap2_clk_exit_cpufreq_table, -#endif }; diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index b8c2a686481c..a1bb23a23351 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -146,14 +146,6 @@ extern const struct clksel_rate gpt_sys_rates[]; extern const struct clksel_rate gfx_l3_rates[]; extern const struct clksel_rate dsp_ick_rates[]; -#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_CPU_FREQ) -extern void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table); -extern void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table); -#else -#define omap2_clk_init_cpufreq_table 0 -#define omap2_clk_exit_cpufreq_table 0 -#endif - extern const struct clkops clkops_omap2_iclk_dflt_wait; extern const struct clkops clkops_omap2_iclk_dflt; extern const struct clkops clkops_omap2_iclk_idle_only; diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c index 86ce62f66190..b8337e248b09 100644 --- a/arch/arm/mach-s5pv210/dma.c +++ b/arch/arm/mach-s5pv210/dma.c @@ -33,8 +33,6 @@ #include #include -static u64 dma_dmamask = DMA_BIT_MASK(32); - static u8 pdma0_peri[] = { DMACH_UART0_RX, DMACH_UART0_TX, diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index a9ea64e0da0d..48d018f2332b 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -484,8 +484,8 @@ static struct wm8994_pdata wm8994_platform_data = { .gpio_defaults[8] = 0x0100, .gpio_defaults[9] = 0x0100, .gpio_defaults[10] = 0x0100, - .ldo[0] = { S5PV210_MP03(6), NULL, &wm8994_ldo1_data }, /* XM0FRNB_2 */ - .ldo[1] = { 0, NULL, &wm8994_ldo2_data }, + .ldo[0] = { S5PV210_MP03(6), &wm8994_ldo1_data }, /* XM0FRNB_2 */ + .ldo[1] = { 0, &wm8994_ldo2_data }, }; /* GPIO I2C PMIC */ diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index 2cf5ed75f390..a8933de3d627 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -674,8 +674,8 @@ static struct wm8994_pdata wm8994_platform_data = { .gpio_defaults[8] = 0x0100, .gpio_defaults[9] = 0x0100, .gpio_defaults[10] = 0x0100, - .ldo[0] = { S5PV210_MP03(6), NULL, &wm8994_ldo1_data }, /* XM0FRNB_2 */ - .ldo[1] = { 0, NULL, &wm8994_ldo2_data }, + .ldo[0] = { S5PV210_MP03(6), &wm8994_ldo1_data }, /* XM0FRNB_2 */ + .ldo[1] = { 0, &wm8994_ldo2_data }, }; /* GPIO I2C PMIC */ diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 8506cbb7fea4..62ec5c452792 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -398,32 +398,6 @@ struct clk dummy_ck = { .ops = &clkops_null, }; -#ifdef CONFIG_CPU_FREQ -void clk_init_cpufreq_table(struct cpufreq_frequency_table **table) -{ - unsigned long flags; - - if (!arch_clock || !arch_clock->clk_init_cpufreq_table) - return; - - spin_lock_irqsave(&clockfw_lock, flags); - arch_clock->clk_init_cpufreq_table(table); - spin_unlock_irqrestore(&clockfw_lock, flags); -} - -void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table) -{ - unsigned long flags; - - if (!arch_clock || !arch_clock->clk_exit_cpufreq_table) - return; - - spin_lock_irqsave(&clockfw_lock, flags); - arch_clock->clk_exit_cpufreq_table(table); - spin_unlock_irqrestore(&clockfw_lock, flags); -} -#endif - /* * */ diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h index 240a7b9fd946..d0ef57c1d71b 100644 --- a/arch/arm/plat-omap/include/plat/clock.h +++ b/arch/arm/plat-omap/include/plat/clock.h @@ -272,8 +272,6 @@ struct clk { #endif }; -struct cpufreq_frequency_table; - struct clk_functions { int (*clk_enable)(struct clk *clk); void (*clk_disable)(struct clk *clk); @@ -283,10 +281,6 @@ struct clk_functions { void (*clk_allow_idle)(struct clk *clk); void (*clk_deny_idle)(struct clk *clk); void (*clk_disable_unused)(struct clk *clk); -#ifdef CONFIG_CPU_FREQ - void (*clk_init_cpufreq_table)(struct cpufreq_frequency_table **); - void (*clk_exit_cpufreq_table)(struct cpufreq_frequency_table **); -#endif }; extern int mpurate; @@ -301,10 +295,6 @@ extern void recalculate_root_clocks(void); extern unsigned long followparent_recalc(struct clk *clk); extern void clk_enable_init_clocks(void); unsigned long omap_fixed_divisor_recalc(struct clk *clk); -#ifdef CONFIG_CPU_FREQ -extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table); -extern void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table); -#endif extern struct clk *omap_clk_get_by_name(const char *name); extern int omap_clk_enable_autoidle_all(void); extern int omap_clk_disable_autoidle_all(void); diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 71553f410016..a0ffc77da809 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -302,6 +302,7 @@ comment "Power management" config SAMSUNG_PM_DEBUG bool "S3C2410 PM Suspend debug" depends on PM + select DEBUG_LL help Say Y here if you want verbose debugging from the PM Suspend and Resume code. See diff --git a/drivers/video/msm/mddi.c b/drivers/video/msm/mddi.c index 4527cbf0a4ec..b061d709bc44 100644 --- a/drivers/video/msm/mddi.c +++ b/drivers/video/msm/mddi.c @@ -420,7 +420,7 @@ static void mddi_resume(struct msm_mddi_client_data *cdata) mddi_set_auto_hibernate(&mddi->client_data, 1); } -static int __init mddi_get_client_caps(struct mddi_info *mddi) +static int __devinit mddi_get_client_caps(struct mddi_info *mddi) { int i, j; @@ -622,9 +622,9 @@ uint32_t mddi_remote_read(struct msm_mddi_client_data *cdata, uint32_t reg) static struct mddi_info mddi_info[2]; -static int __init mddi_clk_setup(struct platform_device *pdev, - struct mddi_info *mddi, - unsigned long clk_rate) +static int __devinit mddi_clk_setup(struct platform_device *pdev, + struct mddi_info *mddi, + unsigned long clk_rate) { int ret;