can: ifi: Add obscure bit swap for EFF frame IDs
In case of CAN2.0 EFF frame, the controller handles frame IDs in a rather bizzare way. The ID is split into an extended part, IDX[28:11] and standard part, ID[10:0]. In the TX path, the core first sends the top 11 bits of the IDX, followed by ID and finally the rest of IDX. In the RX path, the core stores the ID the LSbit part of IDX field, followed by the LSbit parts of real IDX. The MSbit parts of IDX are stored in ID field of the register. This patch implements the necessary bit shuffling to mitigate this obscure behavior. In case two of these controllers are connected together, the RX and TX bit swapping nullifies itself and the issue does not manifest. The issue only manifests when talking to another different CAN controller. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Wolfgang Grandegger <wg@grandegger.com> Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This commit is contained in:
parent
223654355c
commit
6cc6426605
|
@ -136,7 +136,11 @@
|
|||
#define IFI_CANFD_RXFIFO_ID 0x6c
|
||||
#define IFI_CANFD_RXFIFO_ID_ID_OFFSET 0
|
||||
#define IFI_CANFD_RXFIFO_ID_ID_STD_MASK CAN_SFF_MASK
|
||||
#define IFI_CANFD_RXFIFO_ID_ID_STD_OFFSET 0
|
||||
#define IFI_CANFD_RXFIFO_ID_ID_STD_WIDTH 10
|
||||
#define IFI_CANFD_RXFIFO_ID_ID_XTD_MASK CAN_EFF_MASK
|
||||
#define IFI_CANFD_RXFIFO_ID_ID_XTD_OFFSET 11
|
||||
#define IFI_CANFD_RXFIFO_ID_ID_XTD_WIDTH 18
|
||||
#define IFI_CANFD_RXFIFO_ID_IDE BIT(29)
|
||||
|
||||
#define IFI_CANFD_RXFIFO_DATA 0x70 /* 0x70..0xac */
|
||||
|
@ -157,7 +161,11 @@
|
|||
#define IFI_CANFD_TXFIFO_ID 0xbc
|
||||
#define IFI_CANFD_TXFIFO_ID_ID_OFFSET 0
|
||||
#define IFI_CANFD_TXFIFO_ID_ID_STD_MASK CAN_SFF_MASK
|
||||
#define IFI_CANFD_TXFIFO_ID_ID_STD_OFFSET 0
|
||||
#define IFI_CANFD_TXFIFO_ID_ID_STD_WIDTH 10
|
||||
#define IFI_CANFD_TXFIFO_ID_ID_XTD_MASK CAN_EFF_MASK
|
||||
#define IFI_CANFD_TXFIFO_ID_ID_XTD_OFFSET 11
|
||||
#define IFI_CANFD_TXFIFO_ID_ID_XTD_WIDTH 18
|
||||
#define IFI_CANFD_TXFIFO_ID_IDE BIT(29)
|
||||
|
||||
#define IFI_CANFD_TXFIFO_DATA 0xc0 /* 0xb0..0xfc */
|
||||
|
@ -229,10 +237,20 @@ static void ifi_canfd_read_fifo(struct net_device *ndev)
|
|||
|
||||
rxid = readl(priv->base + IFI_CANFD_RXFIFO_ID);
|
||||
id = (rxid >> IFI_CANFD_RXFIFO_ID_ID_OFFSET);
|
||||
if (id & IFI_CANFD_RXFIFO_ID_IDE)
|
||||
if (id & IFI_CANFD_RXFIFO_ID_IDE) {
|
||||
id &= IFI_CANFD_RXFIFO_ID_ID_XTD_MASK;
|
||||
else
|
||||
/*
|
||||
* In case the Extended ID frame is received, the standard
|
||||
* and extended part of the ID are swapped in the register,
|
||||
* so swap them back to obtain the correct ID.
|
||||
*/
|
||||
id = (id >> IFI_CANFD_RXFIFO_ID_ID_XTD_OFFSET) |
|
||||
((id & IFI_CANFD_RXFIFO_ID_ID_STD_MASK) <<
|
||||
IFI_CANFD_RXFIFO_ID_ID_XTD_WIDTH);
|
||||
id |= CAN_EFF_FLAG;
|
||||
} else {
|
||||
id &= IFI_CANFD_RXFIFO_ID_ID_STD_MASK;
|
||||
}
|
||||
cf->can_id = id;
|
||||
|
||||
if (rxdlc & IFI_CANFD_RXFIFO_DLC_ESI) {
|
||||
|
@ -767,6 +785,15 @@ static netdev_tx_t ifi_canfd_start_xmit(struct sk_buff *skb,
|
|||
|
||||
if (cf->can_id & CAN_EFF_FLAG) {
|
||||
txid = cf->can_id & CAN_EFF_MASK;
|
||||
/*
|
||||
* In case the Extended ID frame is transmitted, the
|
||||
* standard and extended part of the ID are swapped
|
||||
* in the register, so swap them back to send the
|
||||
* correct ID.
|
||||
*/
|
||||
txid = (txid >> IFI_CANFD_TXFIFO_ID_ID_XTD_WIDTH) |
|
||||
((txid & IFI_CANFD_TXFIFO_ID_ID_XTD_MASK) <<
|
||||
IFI_CANFD_TXFIFO_ID_ID_XTD_OFFSET);
|
||||
txid |= IFI_CANFD_TXFIFO_ID_IDE;
|
||||
} else {
|
||||
txid = cf->can_id & CAN_SFF_MASK;
|
||||
|
|
Loading…
Reference in New Issue