Second SoC batch for 3.18:

- introduction of the new SAMA5D4 SoC and associated Evaluation Kit - low level soc detection and early printk code - taking advantage of this, documentation of all AT91 SoC DT strings -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQEcBAABAgAGBQJUIB6OAAoJEAf03oE53VmQL+IIALNg2XPS49u2Y6VMjL3srFLt 7CUdNoGB7GJKoGrIXPSyAhJLkRlWREgRsEk/RSYqfBpyBZV4PIx9R6dIz1L+VxGU 9neXLkZGrYNzN8qJPz82+ARuCXdCF13N8ClVfXkNDhwbDnlbZgTkh4hNV118mKLt +PF0d3w354ujieUD7D0pOcdRlny487qMNjtc/0U4P+H2sp2EtL0PpFHicn79InPT V36PpFtUMEgbw2wQPNtlFkjQWstyZ7WJJGUbIX/2P3PASCwKsgrbmkvDvmfp5tUT FdclJwJnxgcpni2fDvbz8Vq04i3hixl2Olm8tAvIXOI/hdVcurvZSfweJ5BrfDk= =fMfO -----END PGP SIGNATURE----- Merge tag 'at91-soc2' of git://github.com/at91linux/linux-at91 into next/soc Pull "Second SoC batch for 3.18" from Nicolas Ferre: - introduction of the new SAMA5D4 SoC and associated Evaluation Kit - low level soc detection and early printk code - taking advantage of this, documentation of all AT91 SoC DT strings Signed-off-by: Arnd Bergmann <arnd@arndb.de> * tag 'at91-soc2' of git://github.com/at91linux/linux-at91: ARM: at91: document Atmel SMART compatibles ARM: at91: add sama5d4 support to sama5_defconfig ARM: at91: dt: add device tree file for SAMA5D4ek board ARM: at91: dt: add device tree file for SAMA5D4 SoC ARM: at91: SAMA5D4 SoC detection code and low level routines ARM: at91: introduce basic SAMA5D4 support clk: at91: add a driver for the h32mx clock
2014-09-26 00:15:09 +02:00 · 2014-09-26 00:15:09 +02:00 · 6d50424a39
parent 0c18acc110 02037a9719
commit 6d50424a39
24 changed files with 1987 additions and 12 deletions
--- a/Documentation/devicetree/bindings/arm/atmel-at91.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt
@ -1,6 +1,43 @@
 Atmel AT91 device tree bindings.
 ================================

+Boards with a SoC of the Atmel AT91 or SMART family shall have the following
+properties:
+
+Required root node properties:
+compatible: must be one of:
+ * "atmel,at91rm9200"
+
+ * "atmel,at91sam9" for SoCs using an ARM926EJ-S core, shall be extended with
+   the specific SoC family or compatible:
+    o "atmel,at91sam9260"
+    o "atmel,at91sam9261"
+    o "atmel,at91sam9263"
+    o "atmel,at91sam9x5" for the 5 series, shall be extended with the specific
+      SoC compatible:
+       - "atmel,at91sam9g15"
+       - "atmel,at91sam9g25"
+       - "atmel,at91sam9g35"
+       - "atmel,at91sam9x25"
+       - "atmel,at91sam9x35"
+    o "atmel,at91sam9g20"
+    o "atmel,at91sam9g45"
+    o "atmel,at91sam9n12"
+    o "atmel,at91sam9rl"
+ * "atmel,sama5" for SoCs using a Cortex-A5, shall be extended with the specific
+   SoC family:
+    o "atmel,sama5d3" shall be extended with the specific SoC compatible:
+       - "atmel,sama5d31"
+       - "atmel,sama5d33"
+       - "atmel,sama5d34"
+       - "atmel,sama5d35"
+       - "atmel,sama5d36"
+    o "atmel,sama5d4" shall be extended with the specific SoC compatible:
+       - "atmel,sama5d41"
+       - "atmel,sama5d42"
+       - "atmel,sama5d43"
+       - "atmel,sama5d44"
+
 PIT Timer required properties:
 - compatible: Should be "atmel,at91sam9260-pit"
 - reg: Should contain registers location and length
--- a/Documentation/devicetree/bindings/clock/at91-clock.txt
+++ b/Documentation/devicetree/bindings/clock/at91-clock.txt
@ -74,6 +74,9 @@ Required properties:
 	"atmel,at91sam9x5-clk-utmi":
 		at91 utmi clock

+	"atmel,sama5d4-clk-h32mx":
+		at91 h32mx clock
+
 Required properties for SCKC node:
 - reg : defines the IO memory reserved for the SCKC.
 - #size-cells : shall be 0 (reg is used to encode clk id).
@ -447,3 +450,14 @@ For example:
 		#clock-cells = <0>;
 		clocks = <&main>;
 	};
+
+Required properties for 32 bits bus Matrix clock (h32mx clock):
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : shall be the master clock source phandle.
+
+For example:
+	h32ck: h32mxck {
+		#clock-cells = <0>;
+		compatible = "atmel,sama5d4-clk-h32mx";
+		clocks = <&mck>;
+	};
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@ -101,6 +101,10 @@ choice
 		bool "Kernel low-level debugging on 9263 and 9g45"
 		depends on HAVE_AT91_DBGU1

+	config AT91_DEBUG_LL_DBGU2
+		bool "Kernel low-level debugging on sama5d4"
+		depends on HAVE_AT91_DBGU2
+
 	config DEBUG_BCM2835
 		bool "Kernel low-level debugging on BCM2835 PL011 UART"
 		depends on ARCH_BCM2835
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@ -48,6 +48,8 @@ dtb-$(CONFIG_ARCH_AT91)	+= sama5d33ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d34ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d35ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d36ek.dtb
+# sama5d4
+dtb-$(CONFIG_ARCH_AT91)	+= at91-sama5d4ek.dtb

 dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
 dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb
--- a/arch/arm/boot/dts/at91-sama5d4ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
@ -0,0 +1,260 @@
+/*
+ * at91-sama5d4ek.dts - Device Tree file for SAMA5D4 Evaluation Kit
+ *
+ *  Copyright (C) 2014 Atmel,
+ *                2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+#include "sama5d4.dtsi"
+
+/ {
+	model = "Atmel SAMA5D4-EK";
+	compatible = "atmel,sama5d4ek", "atmel,sama5d4", "atmel,sama5";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 ignore_loglevel earlyprintk";
+	};
+
+	memory {
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <12000000>;
+		};
+
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			lcd_bus@f0000000 {
+				status = "okay";
+
+				lcd@f0000000 {
+					status = "okay";
+				};
+
+				lcdovl1@f0000140 {
+					status = "okay";
+				};
+
+				lcdovl2@f0000240 {
+					status = "okay";
+				};
+
+				lcdheo1@f0000340 {
+					status = "okay";
+				};
+			};
+
+			adc0: adc@fc034000 {
+				/* The vref depends on JP22 of EK. If connect 1-2 then use 3.3V. connect 2-3 use 3.0V */
+				atmel,adc-vref = <3300>;
+				/*atmel,adc-ts-wires = <4>;*/	/* Set up ADC touch screen */
+				status = "okay";		/* Enable ADC IIO support */
+			};
+
+			mmc0: mmc@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+				slot@1 {
+					reg = <1>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 5 0>;
+				};
+			};
+
+			spi0: spi@f8010000 {
+				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
+				status = "okay";
+				m25p80@0 {
+					compatible = "atmel,at25df321a";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			i2c0: i2c@f8014000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f8020000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			mmc1: mmc@fc000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 6 0>;
+				};
+			};
+
+			usart2: serial@fc008000 {
+				status = "okay";
+			};
+
+			usart3: serial@fc00c000 {
+				status = "okay";
+			};
+
+			usart4: serial@fc010000 {
+				status = "okay";
+			};
+
+			watchdog@fc068640 {
+				status = "okay";
+			};
+
+			pinctrl@fc06a000 {
+				board {
+					pinctrl_mmc0_cd: mmc0_cd {
+						atmel,pins =
+							<AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_mmc1_cd: mmc1_cd {
+						atmel,pins =
+							<AT91_PIOE 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+					};
+					pinctrl_key_gpio: key_gpio_0 {
+						atmel,pins =
+							<AT91_PIOE 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE13 gpio */
+					};
+				};
+			};
+		};
+
+		usb0: gadget@00400000 {
+			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@00500000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0 /* &pioE 10 GPIO_ACTIVE_LOW */
+					   &pioE 11 GPIO_ACTIVE_LOW
+					   &pioE 12 GPIO_ACTIVE_LOW
+					  >;
+			status = "okay";
+		};
+
+		usb2: ehci@00600000 {
+			status = "okay";
+		};
+
+		nand0: nand@80000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-on-flash-bbt;
+			atmel,has-pmecc;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			bootloader@40000 {
+				label = "bootloader";
+				reg = <0x40000 0x80000>;
+			};
+
+			bootloaderenv@c0000 {
+				label = "bootloader env";
+				reg = <0xc0000 0xc0000>;
+			};
+
+			dtb@180000 {
+				label = "device tree";
+				reg = <0x180000 0x80000>;
+			};
+
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x200000 0x600000>;
+			};
+
+			rootfs@800000 {
+				label = "rootfs";
+				reg = <0x800000 0x0f800000>;
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio>;
+
+		pb_user1 {
+			label = "pb_user1";
+			gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x100>;
+			gpio-key,wakeup;
+		};
+	};
+};
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
--- a/arch/arm/configs/sama5_defconfig
+++ b/arch/arm/configs/sama5_defconfig
@ -19,6 +19,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_ARCH_AT91=y
 CONFIG_SOC_SAM_V7=y
 CONFIG_SOC_SAMA5D3=y
+CONFIG_SOC_SAMA5D4=y
 CONFIG_MACH_SAMA5_DT=y
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@ -12,6 +12,9 @@ config HAVE_AT91_DBGU0
 config HAVE_AT91_DBGU1
 	bool

+config HAVE_AT91_DBGU2
+	bool
+
 config AT91_USE_OLD_CLK
 	bool

@ -42,6 +45,9 @@ config AT91_SAM9_TIME
 config HAVE_AT91_SMD
 	bool

+config HAVE_AT91_H32MX
+	bool
+
 config SOC_AT91SAM9
 	bool
 	select AT91_SAM9_TIME
@ -103,6 +109,21 @@ config SOC_SAMA5D3
 	help
 	  Select this if you are using one of Atmel's SAMA5D3 family SoC.
 	  This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36.
+
+config SOC_SAMA5D4
+	bool "SAMA5D4 family"
+	select SOC_SAMA5
+	select HAVE_AT91_DBGU2
+	select CLKSRC_MMIO
+	select CACHE_L2X0
+	select CACHE_PL310
+	select HAVE_FB_ATMEL
+	select HAVE_AT91_UTMI
+	select HAVE_AT91_SMD
+	select HAVE_AT91_USB_CLK
+	select HAVE_AT91_H32MX
+	help
+	  Select this if you are using one of Atmel's SAMA5D4 family SoC.
 endif

 if SOC_SAM_V4_V5
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@ -23,6 +23,7 @@ obj-$(CONFIG_SOC_AT91SAM9N12)	+= at91sam9n12.o
 obj-$(CONFIG_SOC_AT91SAM9X5)	+= at91sam9x5.o
 obj-$(CONFIG_SOC_AT91SAM9RL)	+= at91sam9rl.o
 obj-$(CONFIG_SOC_SAMA5D3)	+= sama5d3.o
+obj-$(CONFIG_SOC_SAMA5D4)	+= sama5d4.o

 obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260_devices.o
--- a/arch/arm/mach-at91/board-dt-sama5.c
+++ b/arch/arm/mach-at91/board-dt-sama5.c
@ -73,7 +73,7 @@ static void __init sama5_dt_device_init(void)
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }

-static const char *sama5_dt_board_compat[] __initdata = {
+static const char *sama5_dt_board_compat[] __initconst = {
 	"atmel,sama5",
 	NULL
 };
@ -88,3 +88,17 @@ DT_MACHINE_START(sama5_dt, "Atmel SAMA5 (Device Tree)")
 	.init_machine	= sama5_dt_device_init,
 	.dt_compat	= sama5_dt_board_compat,
 MACHINE_END
+
+static const char *sama5_alt_dt_board_compat[] __initconst = {
+	"atmel,sama5d4",
+	NULL
+};
+
+DT_MACHINE_START(sama5_alt_dt, "Atmel SAMA5 (Device Tree)")
+	/* Maintainer: Atmel */
+	.map_io		= at91_alt_map_io,
+	.init_early	= at91_dt_initialize,
+	.init_machine	= sama5_dt_device_init,
+	.dt_compat	= sama5_alt_dt_board_compat,
+	.l2c_aux_mask	= ~0UL,
+MACHINE_END
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@ -14,6 +14,7 @@

 /* Map io */
 extern void __init at91_map_io(void);
+extern void __init at91_alt_map_io(void);
 extern void __init at91_init_sram(int bank, unsigned long base,
 				  unsigned int length);

--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@ -36,7 +36,7 @@
 #define ARCH_ID_AT91M40807	0x14080745
 #define ARCH_ID_AT91R40008	0x44000840

-#define ARCH_ID_SAMA5D3		0x8A5C07C0
+#define ARCH_ID_SAMA5		0x8A5C07C0

 #define ARCH_EXID_AT91SAM9M11	0x00000001
 #define ARCH_EXID_AT91SAM9M10	0x00000002
@ -49,12 +49,19 @@
 #define ARCH_EXID_AT91SAM9G25	0x00000003
 #define ARCH_EXID_AT91SAM9X25	0x00000004

+#define ARCH_EXID_SAMA5D3	0x00004300
 #define ARCH_EXID_SAMA5D31	0x00444300
 #define ARCH_EXID_SAMA5D33	0x00414300
 #define ARCH_EXID_SAMA5D34	0x00414301
 #define ARCH_EXID_SAMA5D35	0x00584300
 #define ARCH_EXID_SAMA5D36	0x00004301

+#define ARCH_EXID_SAMA5D4	0x00000007
+#define ARCH_EXID_SAMA5D41	0x00000001
+#define ARCH_EXID_SAMA5D42	0x00000002
+#define ARCH_EXID_SAMA5D43	0x00000003
+#define ARCH_EXID_SAMA5D44	0x00000004
+
 #define ARCH_FAMILY_AT91X92	0x09200000
 #define ARCH_FAMILY_AT91SAM9	0x01900000
 #define ARCH_FAMILY_AT91SAM9XE	0x02900000
@ -86,6 +93,9 @@ enum at91_soc_type {
 	/* SAMA5D3 */
 	AT91_SOC_SAMA5D3,

+	/* SAMA5D4 */
+	AT91_SOC_SAMA5D4,
+
 	/* Unknown type */
 	AT91_SOC_UNKNOWN,
 };
@ -108,6 +118,10 @@ enum at91_soc_subtype {
 	AT91_SOC_SAMA5D31, AT91_SOC_SAMA5D33, AT91_SOC_SAMA5D34,
 	AT91_SOC_SAMA5D35, AT91_SOC_SAMA5D36,

+	/* SAMA5D4 */
+	AT91_SOC_SAMA5D41, AT91_SOC_SAMA5D42, AT91_SOC_SAMA5D43,
+	AT91_SOC_SAMA5D44,
+
 	/* No subtype for this SoC */
 	AT91_SOC_SUBTYPE_NONE,

@ -211,6 +225,12 @@ static inline int at91_soc_is_detected(void)
 #define cpu_is_sama5d3()	(0)
 #endif

+#ifdef CONFIG_SOC_SAMA5D4
+#define cpu_is_sama5d4()	(at91_soc_initdata.type == AT91_SOC_SAMA5D4)
+#else
+#define cpu_is_sama5d4()	(0)
+#endif
+
 /*
 * Since this is ARM, we will never run on any AVR32 CPU. But these
 * definitions may reduce clutter in common drivers.
--- a/arch/arm/mach-at91/include/mach/debug-macro.S
+++ b/arch/arm/mach-at91/include/mach/debug-macro.S
@ -16,8 +16,11 @@

 #if defined(CONFIG_AT91_DEBUG_LL_DBGU0)
 #define AT91_DBGU AT91_BASE_DBGU0
-#else
+#elif defined(CONFIG_AT91_DEBUG_LL_DBGU1)
 #define AT91_DBGU AT91_BASE_DBGU1
+#else
+/* On sama5d4, use USART3 as low level serial console */
+#define AT91_DBGU SAMA5D4_BASE_USART3
 #endif

 	.macro	addruart, rp, rv, tmp
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@ -19,8 +19,10 @@
 /* DBGU base */
 /* rm9200, 9260/9g20, 9261/9g10, 9rl */
 #define AT91_BASE_DBGU0	0xfffff200
-/* 9263, 9g45 */
+/* 9263, 9g45, sama5d3 */
 #define AT91_BASE_DBGU1	0xffffee00
+/* sama5d4 */
+#define AT91_BASE_DBGU2	0xfc069000

 #if defined(CONFIG_ARCH_AT91X40)
 #include <mach/at91x40.h>
@ -34,6 +36,7 @@
 #include <mach/at91sam9x5.h>
 #include <mach/at91sam9n12.h>
 #include <mach/sama5d3.h>
+#include <mach/sama5d4.h>

 /*
 * On all at91 except rm9200 and x40 have the System Controller starts
@ -47,6 +50,11 @@
 * and map the same memory space
 */
 #define AT91_BASE_SYS	0xffffc000
+
+/*
+ * On sama5d4 there is no system controller, we map some needed peripherals
+ */
+#define AT91_ALT_BASE_SYS	0xfc069000
 #endif

 /*
@ -69,6 +77,13 @@
 */
 #define AT91_IO_PHYS_BASE	0xFFF78000
 #define AT91_IO_VIRT_BASE	IOMEM(0xFF000000 - AT91_IO_SIZE)
+
+/*
+ * On sama5d4, remap the peripherals from address 0xFC069000 .. 0xFC06F000
+ * to 0xFB069000 .. 0xFB06F000.  (24Kb)
+ */
+#define AT91_ALT_IO_PHYS_BASE	AT91_ALT_BASE_SYS
+#define AT91_ALT_IO_VIRT_BASE	IOMEM(0xFB069000)
 #else
 /*
 * Identity mapping for the non MMU case.
@ -81,11 +96,13 @@

 /* Convert a physical IO address to virtual IO address */
 #define AT91_IO_P2V(x)		((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
+#define AT91_ALT_IO_P2V(x)	((x) - AT91_ALT_IO_PHYS_BASE + AT91_ALT_IO_VIRT_BASE)

 /*
 * Virtual to Physical Address mapping for IO devices.
 */
 #define AT91_VA_BASE_SYS	AT91_IO_P2V(AT91_BASE_SYS)
+#define AT91_ALT_VA_BASE_SYS	AT91_ALT_IO_P2V(AT91_ALT_BASE_SYS)

 /* Internal SRAM is mapped below the IO devices */
 #define AT91_SRAM_MAX		SZ_1M
--- a/arch/arm/mach-at91/include/mach/sama5d4.h
+++ b/arch/arm/mach-at91/include/mach/sama5d4.h
@ -0,0 +1,33 @@
+/*
+ * Chip-specific header file for the SAMA5D4 family
+ *
+ *  Copyright (C) 2013 Atmel Corporation,
+ *                     Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Common definitions.
+ * Based on SAMA5D4 datasheet.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#ifndef SAMA5D4_H
+#define SAMA5D4_H
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define SAMA5D4_BASE_USART3	0xfc00c000 /* (USART3 non-secure) Base Address */
+#define SAMA5D4_BASE_PMC	0xf0018000 /* (PMC) Base Address */
+#define SAMA5D4_BASE_MPDDRC	0xf0010000 /* (MPDDRC) Base Address */
+#define SAMA5D4_BASE_PIOD	0xfc068000 /* (PIOD) Base Address */
+
+/* Some other peripherals */
+#define SAMA5D4_BASE_SYS2	SAMA5D4_BASE_PIOD
+
+/*
+ * Internal Memory.
+ */
+#define SAMA5D4_NS_SRAM_BASE     0x00210000      /* Internal SRAM base address Non-Secure */
+#define SAMA5D4_NS_SRAM_SIZE     (64 * SZ_1K)   /* Internal SRAM size Non-Secure part (64Kb) */
+
+#endif
--- a/arch/arm/mach-at91/include/mach/uncompress.h
+++ b/arch/arm/mach-at91/include/mach/uncompress.h
@ -94,7 +94,7 @@ static const u32 uarts_sam9x5[] = {
 	0,
 };

-static const u32 uarts_sama5[] = {
+static const u32 uarts_sama5d3[] = {
 	AT91_BASE_DBGU1,
 	SAMA5D3_BASE_USART0,
 	SAMA5D3_BASE_USART1,
@ -103,6 +103,12 @@ static const u32 uarts_sama5[] = {
 	0,
 };

+static const u32 uarts_sama5d4[] = {
+	AT91_BASE_DBGU2,
+	SAMA5D4_BASE_USART3,
+	0,
+};
+
 static inline const u32* decomp_soc_detect(void __iomem *dbgu_base)
 {
 	u32 cidr, socid;
@ -134,8 +140,14 @@ static inline const u32* decomp_soc_detect(void __iomem *dbgu_base)
 	case ARCH_ID_AT91SAM9X5:
 		return uarts_sam9x5;

-	case ARCH_ID_SAMA5D3:
-		return uarts_sama5;
+	case ARCH_ID_SAMA5:
+		cidr = __raw_readl(dbgu_base + AT91_DBGU_EXID);
+		if (cidr & ARCH_EXID_SAMA5D3)
+			return uarts_sama5d3;
+		else if (cidr & ARCH_EXID_SAMA5D4)
+			return uarts_sama5d4;
+
+		break;
 	}

 	/* at91sam9g10 */
@ -156,9 +168,10 @@ static inline void arch_decomp_setup(void)
 	const u32* usarts;

 	usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU0);
-
 	if (!usarts)
 		usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU1);
+	if (!usarts)
+		usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU2);
 	if (!usarts) {
 		at91_uart = NULL;
 		return;
--- a/arch/arm/mach-at91/sama5d4.c
+++ b/arch/arm/mach-at91/sama5d4.c
@ -0,0 +1,64 @@
+/*
+ *  Chip-specific setup code for the SAMA5D4 family
+ *
+ *  Copyright (C) 2013 Atmel Corporation,
+ *                     Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk/at91_pmc.h>
+
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/sama5d4.h>
+#include <mach/cpu.h>
+#include <mach/hardware.h>
+
+#include "soc.h"
+#include "generic.h"
+#include "sam9_smc.h"
+
+/* --------------------------------------------------------------------
+ *  Processor initialization
+ * -------------------------------------------------------------------- */
+static struct map_desc at91_io_desc[] __initdata = {
+	{
+	.virtual        = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_MPDDRC),
+	.pfn            = __phys_to_pfn(SAMA5D4_BASE_MPDDRC),
+	.length         = SZ_512,
+	.type           = MT_DEVICE,
+	},
+	{
+	.virtual        = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_PMC),
+	.pfn            = __phys_to_pfn(SAMA5D4_BASE_PMC),
+	.length         = SZ_512,
+	.type           = MT_DEVICE,
+	},
+	{ /* On sama5d4, we use USART3 as serial console */
+	.virtual        = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_USART3),
+	.pfn            = __phys_to_pfn(SAMA5D4_BASE_USART3),
+	.length         = SZ_256,
+	.type           = MT_DEVICE,
+	},
+	{ /* A bunch of peripheral with fine grained IO space */
+	.virtual        = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_SYS2),
+	.pfn            = __phys_to_pfn(SAMA5D4_BASE_SYS2),
+	.length         = SZ_2K,
+	.type           = MT_DEVICE,
+	},
+};
+
+
+static void __init sama5d4_map_io(void)
+{
+	iotable_init(at91_io_desc, ARRAY_SIZE(at91_io_desc));
+	at91_init_sram(0, SAMA5D4_NS_SRAM_BASE, SAMA5D4_NS_SRAM_SIZE);
+}
+
+AT91_SOC_START(sama5d4)
+	.map_io = sama5d4_map_io,
+AT91_SOC_END
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@ -96,6 +96,13 @@ static struct map_desc at91_io_desc __initdata __maybe_unused = {
 	.type		= MT_DEVICE,
 };

+static struct map_desc at91_alt_io_desc __initdata __maybe_unused = {
+	.virtual	= (unsigned long)AT91_ALT_VA_BASE_SYS,
+	.pfn		= __phys_to_pfn(AT91_ALT_BASE_SYS),
+	.length		= 24 * SZ_1K,
+	.type		= MT_DEVICE,
+};
+
 static void __init soc_detect(u32 dbgu_base)
 {
 	u32 cidr, socid;
@ -158,9 +165,12 @@ static void __init soc_detect(u32 dbgu_base)
 		at91_boot_soc = at91sam9n12_soc;
 		break;

-	case ARCH_ID_SAMA5D3:
-		at91_soc_initdata.type = AT91_SOC_SAMA5D3;
-		at91_boot_soc = sama5d3_soc;
+	case ARCH_ID_SAMA5:
+		at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID);
+		if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D3) {
+			at91_soc_initdata.type = AT91_SOC_SAMA5D3;
+			at91_boot_soc = sama5d3_soc;
+		}
 		break;
 	}

@ -183,7 +193,8 @@ static void __init soc_detect(u32 dbgu_base)
 	at91_soc_initdata.cidr = cidr;

 	/* sub version of soc */
-	at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID);
+	if (!at91_soc_initdata.exid)
+		at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID);

 	if (at91_soc_initdata.type == AT91_SOC_SAM9G45) {
 		switch (at91_soc_initdata.exid) {
@ -240,6 +251,54 @@ static void __init soc_detect(u32 dbgu_base)
 	}
 }

+static void __init alt_soc_detect(u32 dbgu_base)
+{
+	u32 cidr, socid;
+
+	/* SoC ID */
+	cidr = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_CIDR);
+	socid = cidr & ~AT91_CIDR_VERSION;
+
+	switch (socid) {
+	case ARCH_ID_SAMA5:
+		at91_soc_initdata.exid = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_EXID);
+		if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D3) {
+			at91_soc_initdata.type = AT91_SOC_SAMA5D3;
+			at91_boot_soc = sama5d3_soc;
+		} else if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D4) {
+			at91_soc_initdata.type = AT91_SOC_SAMA5D4;
+			at91_boot_soc = sama5d4_soc;
+		}
+		break;
+	}
+
+	if (!at91_soc_is_detected())
+		return;
+
+	at91_soc_initdata.cidr = cidr;
+
+	/* sub version of soc */
+	if (!at91_soc_initdata.exid)
+		at91_soc_initdata.exid = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_EXID);
+
+	if (at91_soc_initdata.type == AT91_SOC_SAMA5D4) {
+		switch (at91_soc_initdata.exid) {
+		case ARCH_EXID_SAMA5D41:
+			at91_soc_initdata.subtype = AT91_SOC_SAMA5D41;
+			break;
+		case ARCH_EXID_SAMA5D42:
+			at91_soc_initdata.subtype = AT91_SOC_SAMA5D42;
+			break;
+		case ARCH_EXID_SAMA5D43:
+			at91_soc_initdata.subtype = AT91_SOC_SAMA5D43;
+			break;
+		case ARCH_EXID_SAMA5D44:
+			at91_soc_initdata.subtype = AT91_SOC_SAMA5D44;
+			break;
+		}
+	}
+}
+
 static const char *soc_name[] = {
 	[AT91_SOC_RM9200]	= "at91rm9200",
 	[AT91_SOC_SAM9260]	= "at91sam9260",
@ -252,6 +311,7 @@ static const char *soc_name[] = {
 	[AT91_SOC_SAM9X5]	= "at91sam9x5",
 	[AT91_SOC_SAM9N12]	= "at91sam9n12",
 	[AT91_SOC_SAMA5D3]	= "sama5d3",
+	[AT91_SOC_SAMA5D4]	= "sama5d4",
 	[AT91_SOC_UNKNOWN]	= "Unknown",
 };

@ -279,6 +339,10 @@ static const char *soc_subtype_name[] = {
 	[AT91_SOC_SAMA5D34]	= "sama5d34",
 	[AT91_SOC_SAMA5D35]	= "sama5d35",
 	[AT91_SOC_SAMA5D36]	= "sama5d36",
+	[AT91_SOC_SAMA5D41]	= "sama5d41",
+	[AT91_SOC_SAMA5D42]	= "sama5d42",
+	[AT91_SOC_SAMA5D43]	= "sama5d43",
+	[AT91_SOC_SAMA5D44]	= "sama5d44",
 	[AT91_SOC_SUBTYPE_NONE]	= "None",
 	[AT91_SOC_SUBTYPE_UNKNOWN] = "Unknown",
 };
@ -341,6 +405,31 @@ void __init at91_ioremap_rstc(u32 base_addr)
 		panic("Impossible to ioremap at91_rstc_base\n");
 }

+void __init at91_alt_map_io(void)
+{
+	/* Map peripherals */
+	iotable_init(&at91_alt_io_desc, 1);
+
+	at91_soc_initdata.type = AT91_SOC_UNKNOWN;
+	at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_UNKNOWN;
+
+	alt_soc_detect(AT91_BASE_DBGU2);
+	if (!at91_soc_is_detected())
+		panic("AT91: Impossible to detect the SOC type");
+
+	pr_info("AT91: Detected soc type: %s\n",
+		at91_get_soc_type(&at91_soc_initdata));
+	if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE)
+		pr_info("AT91: Detected soc subtype: %s\n",
+			at91_get_soc_subtype(&at91_soc_initdata));
+
+	if (!at91_soc_is_enabled())
+		panic("AT91: Soc not enabled");
+
+	if (at91_boot_soc.map_io)
+		at91_boot_soc.map_io();
+}
+
 void __iomem *at91_matrix_base;
 EXPORT_SYMBOL_GPL(at91_matrix_base);

--- a/arch/arm/mach-at91/soc.h
+++ b/arch/arm/mach-at91/soc.h
@ -24,6 +24,7 @@ extern struct at91_init_soc at91sam9rl_soc;
 extern struct at91_init_soc at91sam9x5_soc;
 extern struct at91_init_soc at91sam9n12_soc;
 extern struct at91_init_soc sama5d3_soc;
+extern struct at91_init_soc sama5d4_soc;

 #define AT91_SOC_START(_name)				\
 struct at91_init_soc __initdata _name##_soc		\
@ -74,3 +75,7 @@ static inline int at91_soc_is_enabled(void)
 #if !defined(CONFIG_SOC_SAMA5D3)
 #define sama5d3_soc	at91_boot_soc
 #endif
+
+#if !defined(CONFIG_SOC_SAMA5D4)
+#define sama5d4_soc	at91_boot_soc
+#endif
--- a/drivers/clk/at91/Makefile
+++ b/drivers/clk/at91/Makefile
@ -9,3 +9,4 @@ obj-y += clk-system.o clk-peripheral.o clk-programmable.o
 obj-$(CONFIG_HAVE_AT91_UTMI)		+= clk-utmi.o
 obj-$(CONFIG_HAVE_AT91_USB_CLK)		+= clk-usb.o
 obj-$(CONFIG_HAVE_AT91_SMD)		+= clk-smd.o
+obj-$(CONFIG_HAVE_AT91_H32MX)		+= clk-h32mx.o
--- a/drivers/clk/at91/clk-h32mx.c
+++ b/drivers/clk/at91/clk-h32mx.c
@ -0,0 +1,123 @@
+/*
+ * clk-h32mx.c
+ *
+ *  Copyright (C) 2014 Atmel
+ *
+ * Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/at91_pmc.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+
+#include "pmc.h"
+
+#define H32MX_MAX_FREQ	90000000
+
+struct clk_sama5d4_h32mx {
+	struct clk_hw hw;
+	struct at91_pmc *pmc;
+};
+
+#define to_clk_sama5d4_h32mx(hw) container_of(hw, struct clk_sama5d4_h32mx, hw)
+
+static unsigned long clk_sama5d4_h32mx_recalc_rate(struct clk_hw *hw,
+						 unsigned long parent_rate)
+{
+	struct clk_sama5d4_h32mx *h32mxclk = to_clk_sama5d4_h32mx(hw);
+
+	if (pmc_read(h32mxclk->pmc, AT91_PMC_MCKR) & AT91_PMC_H32MXDIV)
+		return parent_rate / 2;
+
+	if (parent_rate > H32MX_MAX_FREQ)
+		pr_warn("H32MX clock is too fast\n");
+	return parent_rate;
+}
+
+static long clk_sama5d4_h32mx_round_rate(struct clk_hw *hw, unsigned long rate,
+				       unsigned long *parent_rate)
+{
+	unsigned long div;
+
+	if (rate > *parent_rate)
+		return *parent_rate;
+	div = *parent_rate / 2;
+	if (rate < div)
+		return div;
+
+	if (rate - div < *parent_rate - rate)
+		return div;
+
+	return *parent_rate;
+}
+
+static int clk_sama5d4_h32mx_set_rate(struct clk_hw *hw, unsigned long rate,
+				    unsigned long parent_rate)
+{
+	struct clk_sama5d4_h32mx *h32mxclk = to_clk_sama5d4_h32mx(hw);
+	struct at91_pmc *pmc = h32mxclk->pmc;
+	u32 tmp;
+
+	if (parent_rate != rate && (parent_rate / 2) != rate)
+		return -EINVAL;
+
+	pmc_lock(pmc);
+	tmp = pmc_read(pmc, AT91_PMC_MCKR) & ~AT91_PMC_H32MXDIV;
+	if ((parent_rate / 2) == rate)
+		tmp |= AT91_PMC_H32MXDIV;
+	pmc_write(pmc, AT91_PMC_MCKR, tmp);
+	pmc_unlock(pmc);
+
+	return 0;
+}
+
+static const struct clk_ops h32mx_ops = {
+	.recalc_rate = clk_sama5d4_h32mx_recalc_rate,
+	.round_rate = clk_sama5d4_h32mx_round_rate,
+	.set_rate = clk_sama5d4_h32mx_set_rate,
+};
+
+void __init of_sama5d4_clk_h32mx_setup(struct device_node *np,
+				     struct at91_pmc *pmc)
+{
+	struct clk_sama5d4_h32mx *h32mxclk;
+	struct clk_init_data init;
+	const char *parent_name;
+	struct clk *clk;
+
+	h32mxclk = kzalloc(sizeof(*h32mxclk), GFP_KERNEL);
+	if (!h32mxclk)
+		return;
+
+	parent_name = of_clk_get_parent_name(np, 0);
+
+	init.name = np->name;
+	init.ops = &h32mx_ops;
+	init.parent_names = parent_name ? &parent_name : NULL;
+	init.num_parents = parent_name ? 1 : 0;
+	init.flags = CLK_SET_RATE_GATE;
+
+	h32mxclk->hw.init = &init;
+	h32mxclk->pmc = pmc;
+
+	clk = clk_register(NULL, &h32mxclk->hw);
+	if (!clk)
+		return;
+
+	of_clk_add_provider(np, of_clk_src_simple_get, clk);
+}
--- a/drivers/clk/at91/pmc.c
+++ b/drivers/clk/at91/pmc.c
@ -336,6 +336,12 @@ static const struct of_device_id pmc_clk_ids[] __initconst = {
 		.compatible = "atmel,at91sam9x5-clk-smd",
 		.data = of_at91sam9x5_clk_smd_setup,
 	},
+#endif
+#if defined(CONFIG_HAVE_AT91_H32MX)
+	{
+		.compatible = "atmel,sama5d4-clk-h32mx",
+		.data = of_sama5d4_clk_h32mx_setup,
+	},
 #endif
 	{ /*sentinel*/ }
 };
--- a/drivers/clk/at91/pmc.h
+++ b/drivers/clk/at91/pmc.h
@ -120,4 +120,9 @@ extern void __init of_at91sam9x5_clk_smd_setup(struct device_node *np,
 					       struct at91_pmc *pmc);
 #endif

+#if defined(CONFIG_HAVE_AT91_SMD)
+extern void __init of_sama5d4_clk_h32mx_setup(struct device_node *np,
+					      struct at91_pmc *pmc);
+#endif
+
 #endif /* __PMC_H_ */
--- a/include/linux/clk/at91_pmc.h
+++ b/include/linux/clk/at91_pmc.h
@ -125,6 +125,7 @@ extern void __iomem *at91_pmc_base;
 #define		AT91_PMC_PLLADIV2	(1 << 12)		/* PLLA divisor by 2 [some SAM9 only] */
 #define			AT91_PMC_PLLADIV2_OFF		(0 << 12)
 #define			AT91_PMC_PLLADIV2_ON		(1 << 12)
+#define		AT91_PMC_H32MXDIV	BIT(24)

 #define	AT91_PMC_USB		0x38			/* USB Clock Register [some SAM9 only] */
 #define		AT91_PMC_USBS		(0x1 <<  0)		/* USB OHCI Input clock selection */