OpenE2K/linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

ath10k: add QCA9377 sdio hw_param item

Browse Source 
Add hardware parameters for QCA9377 sdio devices, it's now properly supported.

Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
This commit is contained in:
Erik Stromdahl 2019-09-26 17:24:27 +03:00 committed by Kalle Valo
parent a4b9f641e8
commit 6e51b0e491
2 changed files with 30 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

27
drivers/net/wireless/ath/ath10k/core.c
View File

@ -540,6 +540,33 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.fw_diag_ce_download = true,
.tx_stats_over_pktlog = false,
},
{
.id = QCA9377_HW_1_1_DEV_VERSION,
.dev_id = QCA9377_1_0_DEVICE_ID,
.bus = ATH10K_BUS_SDIO,
.name = "qca9377 hw1.1 sdio",
.patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR,
.uart_pin = 19,
.otp_exe_param = 0,
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
.cal_data_len = 8124,
.fw = {
.dir = QCA9377_HW_1_0_FW_DIR,
.board = QCA9377_HW_1_0_BOARD_DATA_FILE,
.board_size = QCA9377_BOARD_DATA_SZ,
.board_ext_size = QCA9377_BOARD_EXT_DATA_SZ,
},
.hw_ops = &qca6174_ops,
.hw_clk = qca6174_clk,
.target_cpu_freq = 176000000,
.decap_align_bytes = 4,
.n_cipher_suites = 8,
.num_peers = TARGET_QCA9377_HL_NUM_PEERS,
.ast_skid_limit = 0x10,
.num_wds_entries = 0x20,
.uart_pin_workaround = true,
},
{
.id = QCA4019_HW_1_0_DEV_VERSION,
.dev_id = 0,

3
drivers/net/wireless/ath/ath10k/hw.h
View File

@ -774,6 +774,9 @@ ath10k_is_rssi_enable(struct ath10k_hw_params *hw,
#define TARGET_HL_TLV_AST_SKID_LIMIT 16
#define TARGET_HL_TLV_NUM_WDS_ENTRIES 2
/* Target specific defines for QCA9377 high latency firmware */
#define TARGET_QCA9377_HL_NUM_PEERS 15
/* Diagnostic Window */
#define CE_DIAG_PIPE 7