OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Merge ../aio-fixes

This commit is contained in:
Benjamin LaHaise 2014-07-14 13:14:27 -04:00
parent 855ef0dec7 263782c1c9
commit 6e830d5371
626 changed files with 5488 additions and 3648 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
Documentation/Changes
View File

@ -280,12 +280,9 @@ that is possible.
mcelog
------
In Linux 2.6.31+ the i386 kernel needs to run the mcelog utility
as a regular cronjob similar to the x86-64 kernel to process and log
machine check events when CONFIG_X86_NEW_MCE is enabled. Machine check
events are errors reported by the CPU. Processing them is strongly encouraged.
All x86-64 kernels since 2.6.4 require the mcelog utility to
process machine checks.
On x86 kernels the mcelog utility is needed to process and log machine check
events when CONFIG_X86_MCE is enabled. Machine check events are errors reported
by the CPU. Processing them is strongly encouraged.
Getting updated software
========================

2
Documentation/DocBook/gadget.tmpl
View File

@ -708,7 +708,7 @@ hardware level details could be very different.
<para>Systems need specialized hardware support to implement OTG,
notably including a special <emphasis>Mini-AB</emphasis> jack
and associated transciever to support <emphasis>Dual-Role</emphasis>
and associated transceiver to support <emphasis>Dual-Role</emphasis>
operation:
they can act either as a host, using the standard
Linux-USB host side driver stack,

4
Documentation/DocBook/genericirq.tmpl
View File

@ -182,7 +182,7 @@
<para>
Each interrupt is described by an interrupt descriptor structure
irq_desc. The interrupt is referenced by an 'unsigned int' numeric
value which selects the corresponding interrupt decription structure
value which selects the corresponding interrupt description structure
in the descriptor structures array.
The descriptor structure contains status information and pointers
to the interrupt flow method and the interrupt chip structure
@ -470,7 +470,7 @@ if (desc->irq_data.chip->irq_eoi)
<para>
To avoid copies of identical implementations of IRQ chips the
core provides a configurable generic interrupt chip
implementation. Developers should check carefuly whether the
implementation. Developers should check carefully whether the
generic chip fits their needs before implementing the same
functionality slightly differently themselves.
</para>

2
Documentation/DocBook/kernel-locking.tmpl
View File

@ -1760,7 +1760,7 @@ as it would be on UP.
</para>
<para>
There is a furthur optimization possible here: remember our original
There is a further optimization possible here: remember our original
cache code, where there were no reference counts and the caller simply
held the lock whenever using the object? This is still possible: if
you hold the lock, no one can delete the object, so you don't need to

6
Documentation/DocBook/libata.tmpl
View File

@ -677,7 +677,7 @@ and other resources, etc.
<listitem>
<para>
ATA_QCFLAG_ACTIVE is clared from qc->flags.
ATA_QCFLAG_ACTIVE is cleared from qc->flags.
</para>
</listitem>
@ -708,7 +708,7 @@ and other resources, etc.
<listitem>
<para>
qc->waiting is claread &amp; completed (in that order).
qc->waiting is cleared &amp; completed (in that order).
</para>
</listitem>
@ -1163,7 +1163,7 @@ and other resources, etc.
<para>
Once sense data is acquired, this type of errors can be
handled similary to other SCSI errors. Note that sense data
handled similarly to other SCSI errors. Note that sense data
may indicate ATA bus error (e.g. Sense Key 04h HARDWARE ERROR
&amp;&amp; ASC/ASCQ 47h/00h SCSI PARITY ERROR). In such
cases, the error should be considered as an ATA bus error and

2
Documentation/DocBook/media_api.tmpl
View File

@ -68,7 +68,7 @@
several digital tv standards. While it is called as DVB API,
in fact it covers several different video standards including
DVB-T, DVB-S, DVB-C and ATSC. The API is currently being updated
to documment support also for DVB-S2, ISDB-T and ISDB-S.</para>
to document support also for DVB-S2, ISDB-T and ISDB-S.</para>
<para>The third part covers the Remote Controller API.</para>
<para>The fourth part covers the Media Controller API.</para>
<para>For additional information and for the latest development code,

30
Documentation/DocBook/mtdnand.tmpl
View File

@ -91,7 +91,7 @@
<listitem><para>
[MTD Interface]</para><para>
These functions provide the interface to the MTD kernel API.
They are not replacable and provide functionality
They are not replaceable and provide functionality
which is complete hardware independent.
</para></listitem>
<listitem><para>
@ -100,14 +100,14 @@
</para></listitem>
<listitem><para>
[GENERIC]</para><para>
Generic functions are not replacable and provide functionality
Generic functions are not replaceable and provide functionality
which is complete hardware independent.
</para></listitem>
<listitem><para>
[DEFAULT]</para><para>
Default functions provide hardware related functionality which is suitable
for most of the implementations. These functions can be replaced by the
board driver if neccecary. Those functions are called via pointers in the
board driver if necessary. Those functions are called via pointers in the
NAND chip description structure. The board driver can set the functions which
should be replaced by board dependent functions before calling nand_scan().
If the function pointer is NULL on entry to nand_scan() then the pointer
@ -264,7 +264,7 @@ static void board_hwcontrol(struct mtd_info *mtd, int cmd)
is set up nand_scan() is called. This function tries to
detect and identify then chip. If a chip is found all the
internal data fields are initialized accordingly.
The structure(s) have to be zeroed out first and then filled with the neccecary
The structure(s) have to be zeroed out first and then filled with the necessary
information about the device.
</para>
<programlisting>
@ -327,7 +327,7 @@ module_init(board_init);
<sect1 id="Exit_function">
<title>Exit function</title>
<para>
The exit function is only neccecary if the driver is
The exit function is only necessary if the driver is
compiled as a module. It releases all resources which
are held by the chip driver and unregisters the partitions
in the MTD layer.
@ -494,7 +494,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
in this case. See rts_from4.c and diskonchip.c for
implementation reference. In those cases we must also
use bad block tables on FLASH, because the ECC layout is
interferring with the bad block marker positions.
interfering with the bad block marker positions.
See bad block table support for details.
</para>
</sect2>
@ -542,7 +542,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
<para>
nand_scan() calls the function nand_default_bbt().
nand_default_bbt() selects appropriate default
bad block table desriptors depending on the chip information
bad block table descriptors depending on the chip information
which was retrieved by nand_scan().
</para>
<para>
@ -554,7 +554,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
<sect2 id="Flash_based_tables">
<title>Flash based tables</title>
<para>
It may be desired or neccecary to keep a bad block table in FLASH.
It may be desired or necessary to keep a bad block table in FLASH.
For AG-AND chips this is mandatory, as they have no factory marked
bad blocks. They have factory marked good blocks. The marker pattern
is erased when the block is erased to be reused. So in case of
@ -565,10 +565,10 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
of the blocks.
</para>
<para>
The blocks in which the tables are stored are procteted against
The blocks in which the tables are stored are protected against
accidental access by marking them bad in the memory bad block
table. The bad block table management functions are allowed
to circumvernt this protection.
to circumvent this protection.
</para>
<para>
The simplest way to activate the FLASH based bad block table support
@ -592,7 +592,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
User defined tables are created by filling out a
nand_bbt_descr structure and storing the pointer in the
nand_chip structure member bbt_td before calling nand_scan().
If a mirror table is neccecary a second structure must be
If a mirror table is necessary a second structure must be
created and a pointer to this structure must be stored
in bbt_md inside the nand_chip structure. If the bbt_md
member is set to NULL then only the main table is used
@ -666,7 +666,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
<para>
For automatic placement some blocks must be reserved for
bad block table storage. The number of reserved blocks is defined
in the maxblocks member of the babd block table description structure.
in the maxblocks member of the bad block table description structure.
Reserving 4 blocks for mirrored tables should be a reasonable number.
This also limits the number of blocks which are scanned for the bad
block table ident pattern.
@ -1068,11 +1068,11 @@ in this page</entry>
<chapter id="filesystems">
<title>Filesystem support</title>
<para>
The NAND driver provides all neccecary functions for a
The NAND driver provides all necessary functions for a
filesystem via the MTD interface.
</para>
<para>
Filesystems must be aware of the NAND pecularities and
Filesystems must be aware of the NAND peculiarities and
restrictions. One major restrictions of NAND Flash is, that you cannot
write as often as you want to a page. The consecutive writes to a page,
before erasing it again, are restricted to 1-3 writes, depending on the
@ -1222,7 +1222,7 @@ in this page</entry>
#define NAND_BBT_VERSION 0x00000100
/* Create a bbt if none axists */
#define NAND_BBT_CREATE 0x00000200
/* Write bbt if neccecary */
/* Write bbt if necessary */
#define NAND_BBT_WRITE 0x00001000
/* Read and write back block contents when writing bbt */
#define NAND_BBT_SAVECONTENT 0x00002000

2
Documentation/DocBook/regulator.tmpl
View File

@ -155,7 +155,7 @@
release regulators. Functions are
provided to <link linkend='API-regulator-enable'>enable</link>
and <link linkend='API-regulator-disable'>disable</link> the
reguator and to get and set the runtime parameters of the
regulator and to get and set the runtime parameters of the
regulator.
</para>
<para>

4
Documentation/DocBook/uio-howto.tmpl
View File

@ -766,10 +766,10 @@ framework to set up sysfs files for this region. Simply leave it alone.
<para>
The dynamic memory regions will be allocated when the UIO device file,
<varname>/dev/uioX</varname> is opened.
Simiar to static memory resources, the memory region information for
Similar to static memory resources, the memory region information for
dynamic regions is then visible via sysfs at
<varname>/sys/class/uio/uioX/maps/mapY/*</varname>.
The dynmaic memory regions will be freed when the UIO device file is
The dynamic memory regions will be freed when the UIO device file is
closed. When no processes are holding the device file open, the address
returned to userspace is ~0.
</para>

2
Documentation/DocBook/usb.tmpl
View File

@ -153,7 +153,7 @@
<listitem><para>The Linux USB API supports synchronous calls for
control and bulk messages.
It also supports asynchnous calls for all kinds of data transfer,
It also supports asynchronous calls for all kinds of data transfer,
using request structures called "URBs" (USB Request Blocks).
</para></listitem>

2
Documentation/DocBook/writing-an-alsa-driver.tmpl
View File

@ -5696,7 +5696,7 @@ struct _snd_pcm_runtime {
suspending the PCM operations via
<function>snd_pcm_suspend_all()</function> or
<function>snd_pcm_suspend()</function>. It means that the PCM
streams are already stoppped when the register snapshot is
streams are already stopped when the register snapshot is
taken. But, remember that you don't have to restart the PCM
stream in the resume callback. It'll be restarted via
trigger call with <constant>SNDRV_PCM_TRIGGER_RESUME</constant>

7
Documentation/cpu-freq/intel-pstate.txt
View File

@ -15,10 +15,13 @@ New sysfs files for controlling P state selection have been added to
/sys/devices/system/cpu/intel_pstate/
max_perf_pct: limits the maximum P state that will be requested by
the driver stated as a percentage of the available performance.
the driver stated as a percentage of the available performance. The
available (P states) performance may be reduced by the no_turbo
setting described below.
min_perf_pct: limits the minimum P state that will be requested by
the driver stated as a percentage of the available performance.
the driver stated as a percentage of the max (non-turbo)
performance level.
no_turbo: limits the driver to selecting P states below the turbo
frequency range.

14
Documentation/devicetree/bindings/arm/armada-38x.txt
View File

@ -6,5 +6,15 @@ following property:
Required root node property:
- compatible: must contain either "marvell,armada380" or
"marvell,armada385" depending on the variant of the SoC being used.
- compatible: must contain "marvell,armada380"
In addition, boards using the Marvell Armada 385 SoC shall have the
following property before the previous one:
Required root node property:
compatible: must contain "marvell,armada385"
Example:
compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada380";

20
Documentation/devicetree/bindings/arm/exynos/power_domain.txt
View File

@ -9,6 +9,18 @@ Required Properties:
- reg: physical base address of the controller and length of memory mapped
region.
Optional Properties:
- clocks: List of clock handles. The parent clocks of the input clocks to the
devices in this power domain are set to oscclk before power gating
and restored back after powering on a domain. This is required for
all domains which are powered on and off and not required for unused
domains.
- clock-names: The following clocks can be specified:
- oscclk: Oscillator clock.
- pclkN, clkN: Pairs of parent of input clock and input clock to the
devices in this power domain. Maximum of 4 pairs (N = 0 to 3)
are supported currently.
Node of a device using power domains must have a samsung,power-domain property
defined with a phandle to respective power domain.
@ -19,6 +31,14 @@ Example:
reg = <0x10023C00 0x10>;
};
mfc_pd: power-domain@10044060 {
compatible = "samsung,exynos4210-pd";
reg = <0x10044060 0x20>;
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>,
<&clock CLK_MOUT_USER_ACLK333>;
clock-names = "oscclk", "pclk0", "clk0";
};
Example of the node using power domain:
node {

3
Documentation/devicetree/bindings/arm/l2cc.txt
View File

@ -40,6 +40,9 @@ Optional properties:
- arm,filter-ranges : <start length> Starting address and length of window to
filter. Addresses in the filter window are directed to the M1 port. Other
addresses will go to the M0 port.
- arm,io-coherent : indicates that the system is operating in an hardware
I/O coherent mode. Valid only when the arm,pl310-cache compatible
string is used.
- interrupts : 1 combined interrupt.
- cache-id-part: cache id part number to be used if it is not present
on hardware

2
Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
View File

@ -48,7 +48,7 @@ adc@12D10000 {
/* NTC thermistor is a hwmon device */
ncp15wb473@0 {
compatible = "ntc,ncp15wb473";
compatible = "murata,ncp15wb473";
pullup-uv = <1800000>;
pullup-ohm = <47000>;
pulldown-ohm = <0>;

20
Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt
View File

@ -3,11 +3,19 @@ NTC Thermistor hwmon sensors
Requires node properties:
- "compatible" value : one of
"ntc,ncp15wb473"
"ntc,ncp18wb473"
"ntc,ncp21wb473"
"ntc,ncp03wb473"
"ntc,ncp15wl333"
"murata,ncp15wb473"
"murata,ncp18wb473"
"murata,ncp21wb473"
"murata,ncp03wb473"
"murata,ncp15wl333"
/* Usage of vendor name "ntc" is deprecated */
<DEPRECATED> "ntc,ncp15wb473"
<DEPRECATED> "ntc,ncp18wb473"
<DEPRECATED> "ntc,ncp21wb473"
<DEPRECATED> "ntc,ncp03wb473"
<DEPRECATED> "ntc,ncp15wl333"
- "pullup-uv" Pull up voltage in micro volts
- "pullup-ohm" Pull up resistor value in ohms
- "pulldown-ohm" Pull down resistor value in ohms
@ -21,7 +29,7 @@ Read more about iio bindings at
Example:
ncp15wb473@0 {
compatible = "ntc,ncp15wb473";
compatible = "murata,ncp15wb473";
pullup-uv = <1800000>;
pullup-ohm = <47000>;
pulldown-ohm = <0>;

7
Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
View File

@ -4,6 +4,13 @@ Required properties:
- compatible: Must contain one of the following:
- "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART.
- "renesas,scifb-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFB compatible UART.
- "renesas,scifa-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFA compatible UART.
- "renesas,scifb-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFB compatible UART.
- "renesas,scifa-r8a7740" for R8A7740 (R-Mobile A1) SCIFA compatible UART.
- "renesas,scifb-r8a7740" for R8A7740 (R-Mobile A1) SCIFB compatible UART.
- "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART.
- "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART.
- "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART.
- "renesas,scifa-r8a7790" for R8A7790 (R-Car H2) SCIFA compatible UART.

6
Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
View File

@ -23,6 +23,12 @@ Optional properties:
- spi-max-frequency: Specifies maximum SPI clock frequency,
Units - Hz. Definition as per
Documentation/devicetree/bindings/spi/spi-bus.txt
- num-cs: total number of chipselects
- cs-gpios: should specify GPIOs used for chipselects.
The gpios will be referred to as reg = <index> in the SPI child
nodes. If unspecified, a single SPI device without a chip
select can be used.
SPI slave nodes must be children of the SPI master node and can contain
properties described in Documentation/devicetree/bindings/spi/spi-bus.txt

1
Documentation/devicetree/bindings/vendor-prefixes.txt
View File

@ -83,6 +83,7 @@ mosaixtech Mosaix Technologies, Inc.
moxa Moxa
mpl MPL AG
mundoreader Mundo Reader S.L.
murata Murata Manufacturing Co., Ltd.
mxicy Macronix International Co., Ltd.
national National Semiconductor
neonode Neonode Inc.

11
Documentation/email-clients.txt
View File

@ -1,6 +1,17 @@
Email clients info for Linux
======================================================================
Git
----------------------------------------------------------------------
These days most developers use `git send-email` instead of regular
email clients. The man page for this is quite good. On the receiving
end, maintainers use `git am` to apply the patches.
If you are new to git then send your first patch to yourself. Save it
as raw text including all the headers. Run `git am raw_email.txt` and
then review the changelog with `git log`. When that works then send
the patch to the appropriate mailing list(s).
General Preferences
----------------------------------------------------------------------
Patches for the Linux kernel are submitted via email, preferably as

8
Documentation/hwmon/ntc_thermistor
View File

@ -1,7 +1,7 @@
Kernel driver ntc_thermistor
=================
Supported thermistors:
Supported thermistors from Murata:
* Murata NTC Thermistors NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333
Prefixes: 'ncp15wb473', 'ncp18wb473', 'ncp21wb473', 'ncp03wb473', 'ncp15wl333'
Datasheet: Publicly available at Murata
@ -15,9 +15,9 @@ Authors:
Description
-----------
The NTC thermistor is a simple thermistor that requires users to provide the
resistance and lookup the corresponding compensation table to get the
temperature input.
The NTC (Negative Temperature Coefficient) thermistor is a simple thermistor
that requires users to provide the resistance and lookup the corresponding
compensation table to get the temperature input.
The NTC driver provides lookup tables with a linear approximation function
and four circuit models with an option not to use any of the four models.

4
Documentation/laptops/00-INDEX
View File

@ -8,8 +8,8 @@ disk-shock-protection.txt
- information on hard disk shock protection.
dslm.c
- Simple Disk Sleep Monitor program
hpfall.c
- (HP) laptop accelerometer program for disk protection.
freefall.c
- (HP/DELL) laptop accelerometer program for disk protection.
laptop-mode.txt
- how to conserve battery power using laptop-mode.
sony-laptop.txt

59
Documentation/laptops/hpfall.c → Documentation/laptops/freefall.c
View File

@ -1,7 +1,9 @@
/* Disk protection for HP machines.
/* Disk protection for HP/DELL machines.
*
* Copyright 2008 Eric Piel
* Copyright 2009 Pavel Machek <pavel@ucw.cz>
* Copyright 2012 Sonal Santan
* Copyright 2014 Pali Rohár <pali.rohar@gmail.com>
*
* GPLv2.
*/
@ -18,24 +20,31 @@
#include <signal.h>
#include <sys/mman.h>
#include <sched.h>
#include <syslog.h>
char unload_heads_path[64];
static int noled;
static char unload_heads_path[64];
static char device_path[32];
static const char app_name[] = "FREE FALL";
int set_unload_heads_path(char *device)
static int set_unload_heads_path(char *device)
{
char devname[64];
if (strlen(device) <= 5 || strncmp(device, "/dev/", 5) != 0)
return -EINVAL;
strncpy(devname, device + 5, sizeof(devname));
strncpy(devname, device + 5, sizeof(devname) - 1);
strncpy(device_path, device, sizeof(device_path) - 1);
snprintf(unload_heads_path, sizeof(unload_heads_path) - 1,
"/sys/block/%s/device/unload_heads", devname);
return 0;
}
int valid_disk(void)
static int valid_disk(void)
{
int fd = open(unload_heads_path, O_RDONLY);
if (fd < 0) {
perror(unload_heads_path);
return 0;
@ -45,43 +54,54 @@ int valid_disk(void)
return 1;
}
void write_int(char *path, int i)
static void write_int(char *path, int i)
{
char buf[1024];
int fd = open(path, O_RDWR);
if (fd < 0) {
perror("open");
exit(1);
}
sprintf(buf, "%d", i);
if (write(fd, buf, strlen(buf)) != strlen(buf)) {
perror("write");
exit(1);
}
close(fd);
}
void set_led(int on)
static void set_led(int on)
{
if (noled)
return;
write_int("/sys/class/leds/hp::hddprotect/brightness", on);
}
void protect(int seconds)
static void protect(int seconds)
{
const char *str = (seconds == 0) ? "Unparked" : "Parked";
write_int(unload_heads_path, seconds*1000);
syslog(LOG_INFO, "%s %s disk head\n", str, device_path);
}
int on_ac(void)
static int on_ac(void)
{
// /sys/class/power_supply/AC0/online
/* /sys/class/power_supply/AC0/online */
return 1;
}
int lid_open(void)
static int lid_open(void)
{
// /proc/acpi/button/lid/LID/state
/* /proc/acpi/button/lid/LID/state */
return 1;
}
void ignore_me(void)
static void ignore_me(int signum)
{
protect(0);
set_led(0);
@ -90,6 +110,7 @@ void ignore_me(void)
int main(int argc, char **argv)
{
int fd, ret;
struct stat st;
struct sched_param param;
if (argc == 1)
@ -111,7 +132,16 @@ int main(int argc, char **argv)
return EXIT_FAILURE;
}
daemon(0, 0);
if (stat("/sys/class/leds/hp::hddprotect/brightness", &st))
noled = 1;
if (daemon(0, 0) != 0) {
perror("daemon");
return EXIT_FAILURE;
}
openlog(app_name, LOG_CONS | LOG_PID | LOG_NDELAY, LOG_LOCAL1);
param.sched_priority = sched_get_priority_max(SCHED_FIFO);
sched_setscheduler(0, SCHED_FIFO, &param);
mlockall(MCL_CURRENT|MCL_FUTURE);
@ -141,6 +171,7 @@ int main(int argc, char **argv)
alarm(20);
}
closelog();
close(fd);
return EXIT_SUCCESS;
}

5
Documentation/ptp/testptp.c
View File

@ -17,6 +17,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#define _GNU_SOURCE
#include <errno.h>
#include <fcntl.h>
#include <inttypes.h>
@ -46,12 +47,14 @@
#define CLOCK_INVALID -1
#endif
/* When glibc offers the syscall, this will go away. */
/* clock_adjtime is not available in GLIBC < 2.14 */
#if !__GLIBC_PREREQ(2, 14)
#include <sys/syscall.h>
static int clock_adjtime(clockid_t id, struct timex *tx)
{
return syscall(__NR_clock_adjtime, id, tx);
}
#endif
static clockid_t get_clockid(int fd)
{

5
Documentation/sound/alsa/HD-Audio-Models.txt
View File

@ -286,6 +286,11 @@ STAC92HD83*
hp-inv-led HP with broken BIOS for inverted mute LED
auto BIOS setup (default)
STAC92HD95
==========
hp-led LED support for HP laptops
hp-bass Bass HPF setup for HP Spectre 13
STAC9872
========
vaio VAIO laptop without SPDIF

14
Documentation/trace/postprocess/trace-vmscan-postprocess.pl
View File

@ -47,7 +47,6 @@ use constant HIGH_KSWAPD_REWAKEUP => 21;
use constant HIGH_NR_SCANNED => 22;
use constant HIGH_NR_TAKEN => 23;
use constant HIGH_NR_RECLAIMED => 24;
use constant HIGH_NR_CONTIG_DIRTY => 25;
my %perprocesspid;
my %perprocess;
@ -105,7 +104,7 @@ my $regex_direct_end_default = 'nr_reclaimed=([0-9]*)';
my $regex_kswapd_wake_default = 'nid=([0-9]*) order=([0-9]*)';
my $regex_kswapd_sleep_default = 'nid=([0-9]*)';
my $regex_wakeup_kswapd_default = 'nid=([0-9]*) zid=([0-9]*) order=([0-9]*)';
my $regex_lru_isolate_default = 'isolate_mode=([0-9]*) order=([0-9]*) nr_requested=([0-9]*) nr_scanned=([0-9]*) nr_taken=([0-9]*) contig_taken=([0-9]*) contig_dirty=([0-9]*) contig_failed=([0-9]*)';
my $regex_lru_isolate_default = 'isolate_mode=([0-9]*) order=([0-9]*) nr_requested=([0-9]*) nr_scanned=([0-9]*) nr_taken=([0-9]*) file=([0-9]*)';
my $regex_lru_shrink_inactive_default = 'nid=([0-9]*) zid=([0-9]*) nr_scanned=([0-9]*) nr_reclaimed=([0-9]*) priority=([0-9]*) flags=([A-Z_|]*)';
my $regex_lru_shrink_active_default = 'lru=([A-Z_]*) nr_scanned=([0-9]*) nr_rotated=([0-9]*) priority=([0-9]*)';
my $regex_writepage_default = 'page=([0-9a-f]*) pfn=([0-9]*) flags=([A-Z_|]*)';
@ -200,7 +199,7 @@ $regex_lru_isolate = generate_traceevent_regex(
$regex_lru_isolate_default,
"isolate_mode", "order",
"nr_requested", "nr_scanned", "nr_taken",
"contig_taken", "contig_dirty", "contig_failed");
"file");
$regex_lru_shrink_inactive = generate_traceevent_regex(
"vmscan/mm_vmscan_lru_shrink_inactive",
$regex_lru_shrink_inactive_default,
@ -375,7 +374,6 @@ EVENT_PROCESS:
}
my $isolate_mode = $1;
my $nr_scanned = $4;
my $nr_contig_dirty = $7;
# To closer match vmstat scanning statistics, only count isolate_both
# and isolate_inactive as scanning. isolate_active is rotation
@ -385,7 +383,6 @@ EVENT_PROCESS:
if ($isolate_mode != 2) {
$perprocesspid{$process_pid}->{HIGH_NR_SCANNED} += $nr_scanned;
}
$perprocesspid{$process_pid}->{HIGH_NR_CONTIG_DIRTY} += $nr_contig_dirty;
} elsif ($tracepoint eq "mm_vmscan_lru_shrink_inactive") {
$details = $6;
if ($details !~ /$regex_lru_shrink_inactive/o) {
@ -539,13 +536,6 @@ sub dump_stats {
}
}
}
if ($stats{$process_pid}->{HIGH_NR_CONTIG_DIRTY}) {
print " ";
my $count = $stats{$process_pid}->{HIGH_NR_CONTIG_DIRTY};
if ($count != 0) {
print "contig-dirty=$count ";
}
}
print "\n";
}

91
MAINTAINERS
View File

@ -943,16 +943,10 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git
F: arch/arm/mach-imx/
F: arch/arm/mach-mxs/
F: arch/arm/boot/dts/imx*
F: arch/arm/configs/imx*_defconfig
ARM/FREESCALE MXS ARM ARCHITECTURE
M: Shawn Guo <shawn.guo@linaro.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
T: git git://git.linaro.org/people/shawnguo/linux-2.6.git
F: arch/arm/mach-mxs/
ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@ -1052,9 +1046,33 @@ M: Santosh Shilimkar <santosh.shilimkar@ti.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-keystone/
F: drivers/clk/keystone/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git
ARM/TEXAS INSTRUMENT KEYSTONE CLOCK FRAMEWORK
M: Santosh Shilimkar <santosh.shilimkar@ti.com>
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/clk/keystone/
ARM/TEXAS INSTRUMENT KEYSTONE ClOCKSOURCE
M: Santosh Shilimkar <santosh.shilimkar@ti.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/clocksource/timer-keystone.c
ARM/TEXAS INSTRUMENT KEYSTONE RESET DRIVER
M: Santosh Shilimkar <santosh.shilimkar@ti.com>
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/power/reset/keystone-reset.c
ARM/TEXAS INSTRUMENT AEMIF/EMIF DRIVERS
M: Santosh Shilimkar <santosh.shilimkar@ti.com>
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/memory/*emif*
ARM/LOGICPD PXA270 MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@ -1296,6 +1314,20 @@ W: http://oss.renesas.com
Q: http://patchwork.kernel.org/project/linux-sh/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git next
S: Supported
F: arch/arm/boot/dts/emev2*
F: arch/arm/boot/dts/r7s*
F: arch/arm/boot/dts/r8a*
F: arch/arm/boot/dts/sh*
F: arch/arm/configs/ape6evm_defconfig
F: arch/arm/configs/armadillo800eva_defconfig
F: arch/arm/configs/bockw_defconfig
F: arch/arm/configs/genmai_defconfig
F: arch/arm/configs/koelsch_defconfig
F: arch/arm/configs/kzm9g_defconfig
F: arch/arm/configs/lager_defconfig
F: arch/arm/configs/mackerel_defconfig
F: arch/arm/configs/marzen_defconfig
F: arch/arm/configs/shmobile_defconfig
F: arch/arm/mach-shmobile/
F: drivers/sh/
@ -2917,6 +2949,9 @@ L: linux-doc@vger.kernel.org
T: quilt http://www.infradead.org/~rdunlap/Doc/patches/
S: Maintained
F: Documentation/
X: Documentation/ABI/
X: Documentation/devicetree/
X: Documentation/[a-z][a-z]_[A-Z][A-Z]/
DOUBLETALK DRIVER
M: "James R. Van Zandt" <jrv@vanzandt.mv.com>
@ -3189,14 +3224,6 @@ L: linux-scsi@vger.kernel.org
S: Maintained
F: drivers/scsi/eata_pio.*
EBTABLES
L: netfilter-devel@vger.kernel.org
W: http://ebtables.sourceforge.net/
S: Orphan
F: include/linux/netfilter_bridge/ebt_*.h
F: include/uapi/linux/netfilter_bridge/ebt_*.h
F: net/bridge/netfilter/ebt*.c
EC100 MEDIA DRIVER
M: Antti Palosaari <crope@iki.fi>
L: linux-media@vger.kernel.org
@ -5517,10 +5544,11 @@ S: Maintained
F: arch/arm/mach-lpc32xx/
LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI)
M: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com>
M: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
M: support@lsi.com
L: DL-MPTFusionLinux@lsi.com
M: Nagalakshmi Nandigama <nagalakshmi.nandigama@avagotech.com>
M: Praveen Krishnamoorthy <praveen.krishnamoorthy@avagotech.com>
M: Sreekanth Reddy <sreekanth.reddy@avagotech.com>
M: Abhijit Mahajan <abhijit.mahajan@avagotech.com>
L: MPT-FusionLinux.pdl@avagotech.com
L: linux-scsi@vger.kernel.org
W: http://www.lsilogic.com/support
S: Supported
@ -6105,12 +6133,11 @@ F: Documentation/networking/s2io.txt
F: Documentation/networking/vxge.txt
F: drivers/net/ethernet/neterion/
NETFILTER/IPTABLES
NETFILTER ({IP,IP6,ARP,EB,NF}TABLES)
M: Pablo Neira Ayuso <pablo@netfilter.org>
M: Patrick McHardy <kaber@trash.net>
M: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
L: netfilter-devel@vger.kernel.org
L: netfilter@vger.kernel.org
L: coreteam@netfilter.org
W: http://www.netfilter.org/
W: http://www.iptables.org/
@ -6774,7 +6801,7 @@ F: arch/x86/kernel/quirks.c
PCI DRIVER FOR IMX6
M: Richard Zhu <r65037@freescale.com>
M: Shawn Guo <shawn.guo@linaro.org>
M: Shawn Guo <shawn.guo@freescale.com>
L: linux-pci@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
@ -8971,7 +8998,7 @@ F: drivers/media/radio/radio-raremono.c
THERMAL
M: Zhang Rui <rui.zhang@intel.com>
M: Eduardo Valentin <eduardo.valentin@ti.com>
M: Eduardo Valentin <edubezval@gmail.com>
L: linux-pm@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git
@ -8998,7 +9025,7 @@ S: Maintained
F: drivers/platform/x86/thinkpad_acpi.c
TI BANDGAP AND THERMAL DRIVER
M: Eduardo Valentin <eduardo.valentin@ti.com>
M: Eduardo Valentin <edubezval@gmail.com>
L: linux-pm@vger.kernel.org
S: Supported
F: drivers/thermal/ti-soc-thermal/
@ -9412,12 +9439,6 @@ S: Maintained
F: drivers/usb/host/isp116x*
F: include/linux/usb/isp116x.h
USB KAWASAKI LSI DRIVER
M: Oliver Neukum <oliver@neukum.org>
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/serial/kl5kusb105.*
USB MASS STORAGE DRIVER
M: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
L: linux-usb@vger.kernel.org
@ -9445,12 +9466,6 @@ S: Maintained
F: Documentation/usb/ohci.txt
F: drivers/usb/host/ohci*
USB OPTION-CARD DRIVER
M: Matthias Urlichs <smurf@smurf.noris.de>
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/serial/option.c
USB PEGASUS DRIVER
M: Petko Manolov <petkan@nucleusys.com>
L: linux-usb@vger.kernel.org
@ -9483,7 +9498,7 @@ S: Maintained
F: drivers/net/usb/rtl8150.c
USB SERIAL SUBSYSTEM
M: Johan Hovold <jhovold@gmail.com>
M: Johan Hovold <johan@kernel.org>
L: linux-usb@vger.kernel.org
S: Maintained
F: Documentation/usb/usb-serial.txt

102
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 16
SUBLEVEL = 0
EXTRAVERSION = -rc2
EXTRAVERSION = -rc5
NAME = Shuffling Zombie Juror
# *DOCUMENTATION*
@ -41,6 +41,29 @@ unexport GREP_OPTIONS
# descending is started. They are now explicitly listed as the
# prepare rule.
# Beautify output
# ---------------------------------------------------------------------------
#
# Normally, we echo the whole command before executing it. By making
# that echo $($(quiet)$(cmd)), we now have the possibility to set
# $(quiet) to choose other forms of output instead, e.g.
#
# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
#
# If $(quiet) is empty, the whole command will be printed.
# If it is set to "quiet_", only the short version will be printed.
# If it is set to "silent_", nothing will be printed at all, since
# the variable $(silent_cmd_cc_o_c) doesn't exist.
#
# A simple variant is to prefix commands with $(Q) - that's useful
# for commands that shall be hidden in non-verbose mode.
#
# $(Q)ln $@ :<
#
# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
# If KBUILD_VERBOSE equals 1 then the above command is displayed.
#
# To put more focus on warnings, be less verbose as default
# Use 'make V=1' to see the full commands
@ -51,6 +74,29 @@ ifndef KBUILD_VERBOSE
KBUILD_VERBOSE = 0
endif
ifeq ($(KBUILD_VERBOSE),1)
quiet =
Q =
else
quiet=quiet_
Q = @
endif
# If the user is running make -s (silent mode), suppress echoing of
# commands
ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4
ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
quiet=silent_
endif
else # make-3.8x
ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
quiet=silent_
endif
endif
export quiet Q KBUILD_VERBOSE
# Call a source code checker (by default, "sparse") as part of the
# C compilation.
#
@ -126,7 +172,13 @@ PHONY += $(MAKECMDGOALS) sub-make
$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
@:
# Fake the "Entering directory" message once, so that IDEs/editors are
# able to understand relative filenames.
echodir := @echo
quiet_echodir := @echo
silent_echodir := @:
sub-make: FORCE
$($(quiet)echodir) "make[1]: Entering directory \`$(KBUILD_OUTPUT)'"
$(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
KBUILD_SRC=$(CURDIR) \
KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \
@ -289,52 +341,6 @@ endif
export KBUILD_MODULES KBUILD_BUILTIN
export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
# Beautify output
# ---------------------------------------------------------------------------
#
# Normally, we echo the whole command before executing it. By making
# that echo $($(quiet)$(cmd)), we now have the possibility to set
# $(quiet) to choose other forms of output instead, e.g.
#
# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
#
# If $(quiet) is empty, the whole command will be printed.
# If it is set to "quiet_", only the short version will be printed.
# If it is set to "silent_", nothing will be printed at all, since
# the variable $(silent_cmd_cc_o_c) doesn't exist.
#
# A simple variant is to prefix commands with $(Q) - that's useful
# for commands that shall be hidden in non-verbose mode.
#
# $(Q)ln $@ :<
#
# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
# If KBUILD_VERBOSE equals 1 then the above command is displayed.
ifeq ($(KBUILD_VERBOSE),1)
quiet =
Q =
else
quiet=quiet_
Q = @
endif
# If the user is running make -s (silent mode), suppress echoing of
# commands
ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4
ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
quiet=silent_
endif
else # make-3.8x
ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
quiet=silent_
endif
endif
export quiet Q KBUILD_VERBOSE
ifneq ($(CC),)
ifeq ($(shell $(CC) -v 2>&1 | grep -c "clang version"), 1)
COMPILER := clang
@ -1170,7 +1176,7 @@ distclean: mrproper
# Packaging of the kernel to various formats
# ---------------------------------------------------------------------------
# rpm target kept for backward compatibility
package-dir := $(srctree)/scripts/package
package-dir := scripts/package
%src-pkg: FORCE
$(Q)$(MAKE) $(build)=$(package-dir) $@

4
arch/arc/include/asm/cache.h
View File

@ -60,7 +60,7 @@ extern void read_decode_cache_bcr(void);
#define ARC_REG_IC_IVIC 0x10
#define ARC_REG_IC_CTRL 0x11
#define ARC_REG_IC_IVIL 0x19
#if defined(CONFIG_ARC_MMU_V3) || defined (CONFIG_ARC_MMU_V4)
#if defined(CONFIG_ARC_MMU_V3)
#define ARC_REG_IC_PTAG 0x1E
#endif
@ -74,7 +74,7 @@ extern void read_decode_cache_bcr(void);
#define ARC_REG_DC_IVDL 0x4A
#define ARC_REG_DC_FLSH 0x4B
#define ARC_REG_DC_FLDL 0x4C
#if defined(CONFIG_ARC_MMU_V3) || defined (CONFIG_ARC_MMU_V4)
#if defined(CONFIG_ARC_MMU_V3)
#define ARC_REG_DC_PTAG 0x5C
#endif

1
arch/arc/include/uapi/asm/ptrace.h
View File

@ -11,6 +11,7 @@
#ifndef _UAPI__ASM_ARC_PTRACE_H
#define _UAPI__ASM_ARC_PTRACE_H
#define PTRACE_GET_THREAD_AREA 25
#ifndef __ASSEMBLY__
/*

2
arch/arc/kernel/ctx_sw_asm.S
View File

@ -10,9 +10,9 @@
* -This is the more "natural" hand written assembler
*/
#include <linux/linkage.h>
#include <asm/entry.h> /* For the SAVE_* macros */
#include <asm/asm-offsets.h>
#include <asm/linkage.h>
#define KSP_WORD_OFF ((TASK_THREAD + THREAD_KSP) / 4)

2
arch/arc/kernel/devtree.c
View File

@ -41,7 +41,7 @@ const struct machine_desc * __init setup_machine_fdt(void *dt)
{
const struct machine_desc *mdesc;
unsigned long dt_root;
void *clk;
const void *clk;
int len;
if (!early_init_dt_scan(dt))

7
arch/arc/kernel/head.S
View File

@ -77,10 +77,11 @@ stext:
; Clear BSS before updating any globals
; XXX: use ZOL here
mov r5, __bss_start
mov r6, __bss_stop
sub r6, __bss_stop, r5
lsr.f lp_count, r6, 2
lpnz 1f
st.ab 0, [r5, 4]
1:
st.ab 0, [r5,4]
brlt r5, r6, 1b
; Uboot - kernel ABI
; r0 = [0] No uboot interaction, [1] cmdline in r2, [2] DTB in r2

4
arch/arc/kernel/ptrace.c
View File

@ -146,6 +146,10 @@ long arch_ptrace(struct task_struct *child, long request,
pr_debug("REQ=%ld: ADDR =0x%lx, DATA=0x%lx)\n", request, addr, data);
switch (request) {
case PTRACE_GET_THREAD_AREA:
ret = put_user(task_thread_info(child)->thr_ptr,
(unsigned long __user *)data);
break;
default:
ret = ptrace_request(child, request, addr, data);
break;

15
arch/arc/kernel/smp.c
View File

@ -337,8 +337,19 @@ irqreturn_t do_IPI(int irq, void *dev_id)
* API called by platform code to hookup arch-common ISR to their IPI IRQ
*/
static DEFINE_PER_CPU(int, ipi_dev);
static struct irqaction arc_ipi_irq = {
.name = "IPI Interrupt",
.flags = IRQF_PERCPU,
.handler = do_IPI,
};
int smp_ipi_irq_setup(int cpu, int irq)
{
int *dev_id = &per_cpu(ipi_dev, smp_processor_id());
return request_percpu_irq(irq, do_IPI, "IPI Interrupt", dev_id);
if (!cpu)
return setup_irq(irq, &arc_ipi_irq);
else
arch_unmask_irq(irq);
return 0;
}

2
arch/arc/kernel/vmlinux.lds.S
View File

@ -116,7 +116,7 @@ SECTIONS
_edata = .;
BSS_SECTION(0, 0, 0)
BSS_SECTION(4, 4, 4)
#ifdef CONFIG_ARC_DW2_UNWIND
. = ALIGN(PAGE_SIZE);

25
arch/arc/mm/cache_arc700.c
View File

@ -389,7 +389,7 @@ static inline void __dc_line_op(unsigned long paddr, unsigned long vaddr,
/***********************************************************
* Machine specific helper for per line I-Cache invalidate.
*/
static void __ic_line_inv_vaddr(unsigned long paddr, unsigned long vaddr,
static void __ic_line_inv_vaddr_local(unsigned long paddr, unsigned long vaddr,
unsigned long sz)
{
unsigned long flags;
@ -405,6 +405,23 @@ static inline void __ic_entire_inv(void)
read_aux_reg(ARC_REG_IC_CTRL); /* blocks */
}
struct ic_line_inv_vaddr_ipi {
unsigned long paddr, vaddr;
int sz;
};
static void __ic_line_inv_vaddr_helper(void *info)
{
struct ic_line_inv_vaddr_ipi *ic_inv = (struct ic_line_inv_vaddr_ipi*) info;
__ic_line_inv_vaddr_local(ic_inv->paddr, ic_inv->vaddr, ic_inv->sz);
}
static void __ic_line_inv_vaddr(unsigned long paddr, unsigned long vaddr,
unsigned long sz)
{
struct ic_line_inv_vaddr_ipi ic_inv = { paddr, vaddr , sz};
on_each_cpu(__ic_line_inv_vaddr_helper, &ic_inv, 1);
}
#else
#define __ic_entire_inv()
@ -553,12 +570,8 @@ void flush_icache_range(unsigned long kstart, unsigned long kend)
*/
void __sync_icache_dcache(unsigned long paddr, unsigned long vaddr, int len)
{
unsigned long flags;
local_irq_save(flags);
__ic_line_inv_vaddr(paddr, vaddr, len);
__dc_line_op(paddr, vaddr, len, OP_FLUSH_N_INV);
local_irq_restore(flags);
__ic_line_inv_vaddr(paddr, vaddr, len);
}
/* wrapper to compile time eliminate alignment checks in flush loop */

2
arch/arm/boot/dts/Makefile
View File

@ -357,7 +357,7 @@ dtb-$(CONFIG_ARCH_STI)+= stih407-b2120.dtb \
stih415-b2020.dtb \
stih416-b2000.dtb \
stih416-b2020.dtb \
stih416-b2020-revE.dtb
stih416-b2020e.dtb
dtb-$(CONFIG_MACH_SUN4I) += \
sun4i-a10-a1000.dtb \
sun4i-a10-cubieboard.dtb \

4
arch/arm/boot/dts/am335x-evm.dts
View File

@ -529,8 +529,8 @@
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
0 0 1 2
>;
tx-num-evt = <1>;
rx-num-evt = <1>;
tx-num-evt = <32>;
rx-num-evt = <32>;
};
&tps {

4
arch/arm/boot/dts/am335x-evmsk.dts
View File

@ -560,8 +560,8 @@
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
0 0 1 2
>;
tx-num-evt = <1>;
rx-num-evt = <1>;
tx-num-evt = <32>;
rx-num-evt = <32>;
};
&tscadc {

6
arch/arm/boot/dts/am335x-igep0033.dtsi
View File

@ -105,10 +105,16 @@
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <0>;
phy-mode = "rmii";
};
&cpsw_emac1 {
phy_id = <&davinci_mdio>, <1>;
phy-mode = "rmii";
};
&phy_sel {
rmii-clock-ext;
};
&elm {

4
arch/arm/boot/dts/am43x-epos-evm.dts
View File

@ -319,6 +319,10 @@
phy-mode = "rmii";
};
&phy_sel {
rmii-clock-ext;
};
&i2c0 {
status = "okay";
pinctrl-names = "default";

2
arch/arm/boot/dts/armada-380.dtsi
View File

@ -16,7 +16,7 @@
/ {
model = "Marvell Armada 380 family SoC";
compatible = "marvell,armada380", "marvell,armada38x";
compatible = "marvell,armada380";
cpus {
#address-cells = <1>;

2
arch/arm/boot/dts/armada-385-db.dts
View File

@ -16,7 +16,7 @@
/ {
model = "Marvell Armada 385 Development Board";
compatible = "marvell,a385-db", "marvell,armada385", "marvell,armada38x";
compatible = "marvell,a385-db", "marvell,armada385", "marvell,armada380";
chosen {
bootargs = "console=ttyS0,115200 earlyprintk";

2
arch/arm/boot/dts/armada-385-rd.dts
View File

@ -17,7 +17,7 @@
/ {
model = "Marvell Armada 385 Reference Design";
compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada38x";
compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada380";
chosen {
bootargs = "console=ttyS0,115200 earlyprintk";

2
arch/arm/boot/dts/armada-385.dtsi
View File

@ -16,7 +16,7 @@
/ {
model = "Marvell Armada 385 family SoC";
compatible = "marvell,armada385", "marvell,armada38x";
compatible = "marvell,armada385", "marvell,armada380";
cpus {
#address-cells = <1>;

2
arch/arm/boot/dts/armada-38x.dtsi
View File

@ -20,7 +20,7 @@
/ {
model = "Marvell Armada 38x family SoC";
compatible = "marvell,armada38x";
compatible = "marvell,armada380";
aliases {
gpio0 = &gpio0;

21
arch/arm/boot/dts/at91sam9261.dtsi
View File

@ -568,24 +568,17 @@
#size-cells = <0>;
#interrupt-cells = <1>;
slow_rc_osc: slow_rc_osc {
compatible = "fixed-clock";
main_osc: main_osc {
compatible = "atmel,at91rm9200-clk-main-osc";
#clock-cells = <0>;
clock-frequency = <32768>;
clock-accuracy = <50000000>;
};
clk32k: slck {
compatible = "atmel,at91sam9260-clk-slow";
#clock-cells = <0>;
clocks = <&slow_rc_osc &slow_xtal>;
interrupts-extended = <&pmc AT91_PMC_MOSCS>;
clocks = <&main_xtal>;
};
main: mainck {
compatible = "atmel,at91rm9200-clk-main";
#clock-cells = <0>;
interrupts-extended = <&pmc AT91_PMC_MOSCS>;
clocks = <&main_xtal>;
clocks = <&main_osc>;
};
plla: pllack {
@ -615,7 +608,7 @@
compatible = "atmel,at91rm9200-clk-master";
#clock-cells = <0>;
interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
atmel,clk-output-range = <0 94000000>;
atmel,clk-divisors = <1 2 4 0>;
};
@ -632,7 +625,7 @@
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <&pmc>;
clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
prog0: prog0 {
#clock-cells = <0>;

4
arch/arm/boot/dts/at91sam9261ek.dts
View File

@ -20,6 +20,10 @@
reg = <0x20000000 0x4000000>;
};
slow_xtal {
clock-frequency = <32768>;
};
main_xtal {
clock-frequency = <18432000>;
};

4
arch/arm/boot/dts/at91sam9n12.dtsi
View File

@ -132,8 +132,8 @@
<595000000 650000000 3 0>,
<545000000 600000000 0 1>,
<495000000 555000000 1 1>,
<445000000 500000000 1 2>,
<400000000 450000000 1 3>;
<445000000 500000000 2 1>,
<400000000 450000000 3 1>;
};
plladiv: plladivck {

6
arch/arm/boot/dts/at91sam9x5.dtsi
View File

@ -140,8 +140,8 @@
595000000 650000000 3 0
545000000 600000000 0 1
495000000 555000000 1 1
445000000 500000000 1 2
400000000 450000000 1 3>;
445000000 500000000 2 1
400000000 450000000 3 1>;
};
plladiv: plladivck {
@ -1045,6 +1045,8 @@
reg = <0x00500000 0x80000
0xf803c000 0x400>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&usb>, <&udphs_clk>;
clock-names = "hclk", "pclk";
status = "disabled";
ep0 {

1
arch/arm/boot/dts/dra7-evm.dts
View File

@ -240,6 +240,7 @@
regulator-name = "ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};

12
arch/arm/boot/dts/dra7.dtsi
View File

@ -773,7 +773,6 @@
clocks = <&qspi_gfclk_div>;
clock-names = "fck";
num-cs = <4>;
interrupts = <0 343 0x4>;
status = "disabled";
};
@ -984,6 +983,17 @@
#size-cells = <1>;
status = "disabled";
};
atl: atl@4843c000 {
compatible = "ti,dra7-atl";
reg = <0x4843c000 0x3ff>;
ti,hwmods = "atl";
ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>,
<&atl_clkin2_ck>, <&atl_clkin3_ck>;
clocks = <&atl_gfclk_mux>;
clock-names = "fck";
status = "disabled";
};
};
};

26
arch/arm/boot/dts/dra7xx-clocks.dtsi
View File

@ -10,26 +10,26 @@
&cm_core_aon_clocks {
atl_clkin0_ck: atl_clkin0_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <0>;
compatible = "ti,dra7-atl-clock";
clocks = <&atl_gfclk_mux>;
};
atl_clkin1_ck: atl_clkin1_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <0>;
compatible = "ti,dra7-atl-clock";
clocks = <&atl_gfclk_mux>;
};
atl_clkin2_ck: atl_clkin2_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <0>;
compatible = "ti,dra7-atl-clock";
clocks = <&atl_gfclk_mux>;
};
atl_clkin3_ck: atl_clkin3_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <0>;
compatible = "ti,dra7-atl-clock";
clocks = <&atl_gfclk_mux>;
};
hdmi_clkin_ck: hdmi_clkin_ck {
@ -673,10 +673,12 @@
l3_iclk_div: l3_iclk_div {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
compatible = "ti,divider-clock";
ti,max-div = <2>;
ti,bit-shift = <4>;
reg = <0x0100>;
clocks = <&dpll_core_h12x2_ck>;
clock-mult = <1>;
clock-div = <1>;
ti,index-power-of-two;
};
l4_root_clk_div: l4_root_clk_div {
@ -684,7 +686,7 @@
compatible = "fixed-factor-clock";
clocks = <&l3_iclk_div>;
clock-mult = <1>;
clock-div = <1>;
clock-div = <2>;
};
video1_clk2_div: video1_clk2_div {

4
arch/arm/boot/dts/exynos4.dtsi
View File

@ -113,7 +113,7 @@
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x10490000 0x1000>, <0x10480000 0x100>;
reg = <0x10490000 0x10000>, <0x10480000 0x10000>;
};
combiner: interrupt-controller@10440000 {
@ -554,7 +554,7 @@
interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>;
clocks = <&clock CLK_PWM>;
clock-names = "timers";
#pwm-cells = <2>;
#pwm-cells = <3>;
status = "disabled";
};

5
arch/arm/boot/dts/exynos5420.dtsi
View File

@ -167,7 +167,7 @@
compatible = "samsung,exynos5420-audss-clock";
reg = <0x03810000 0x0C>;
#clock-cells = <1>;
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>,
<&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
};
@ -260,6 +260,9 @@
mfc_pd: power-domain@10044060 {
compatible = "samsung,exynos4210-pd";
reg = <0x10044060 0x20>;
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>,
<&clock CLK_MOUT_USER_ACLK333>;
clock-names = "oscclk", "pclk0", "clk0";
};
disp_pd: power-domain@100440C0 {

10
arch/arm/boot/dts/imx51-babbage.dts
View File

@ -315,15 +315,15 @@
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
fsl,cd-controller;
fsl,wp-controller;
cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&esdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc2>;
cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@ -468,8 +468,8 @@
MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5
MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5
MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5
MX51_PAD_GPIO1_0__SD1_CD 0x20d5
MX51_PAD_GPIO1_1__SD1_WP 0x20d5
MX51_PAD_GPIO1_0__GPIO1_0 0x100
MX51_PAD_GPIO1_1__GPIO1_1 0x100
>;
};

4
arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
View File

@ -107,7 +107,7 @@
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1 &pinctrl_esdhc1_cd>;
fsl,cd-controller;
cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
status = "okay";
};
@ -206,7 +206,7 @@
pinctrl_esdhc1_cd: esdhc1_cd {
fsl,pins = <
MX51_PAD_GPIO1_0__SD1_CD 0x20d5
MX51_PAD_GPIO1_0__GPIO1_0 0xd5
>;
};

38
arch/arm/boot/dts/imx53-m53evk.dts
View File

@ -21,27 +21,25 @@
<0xb0000000 0x20000000>;
};
soc {
display1: display@di1 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "bgr666";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu_disp1>;
display1: display@di1 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "bgr666";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu_disp1>;
display-timings {
800x480p60 {
native-mode;
clock-frequency = <31500000>;
hactive = <800>;
vactive = <480>;
hfront-porch = <40>;
hback-porch = <88>;
hsync-len = <128>;
vback-porch = <33>;
vfront-porch = <9>;
vsync-len = <3>;
vsync-active = <1>;
};
display-timings {
800x480p60 {
native-mode;
clock-frequency = <31500000>;
hactive = <800>;
vactive = <480>;
hfront-porch = <40>;
hback-porch = <88>;
hsync-len = <128>;
vback-porch = <33>;
vfront-porch = <9>;
vsync-len = <3>;
vsync-active = <1>;
};
};

10
arch/arm/boot/dts/imx6dl-hummingboard.dts
View File

@ -143,6 +143,14 @@
fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>;
};
pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-id {
/*
* Similar to pinctrl_usbotg_2, but we want it
* pulled down for a fixed host connection.
*/
fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
};
pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus {
fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>;
};
@ -178,6 +186,8 @@
};
&usbotg {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>;
vbus-supply = <&reg_usbotg_vbus>;
status = "okay";
};

2
arch/arm/boot/dts/imx6q-gw51xx.dts
View File

@ -11,7 +11,7 @@
/dts-v1/;
#include "imx6q.dtsi"
#include "imx6qdl-gw54xx.dtsi"
#include "imx6qdl-gw51xx.dtsi"
/ {
model = "Gateworks Ventana i.MX6 Quad GW51XX";

27
arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
View File

@ -12,6 +12,19 @@
pinctrl-0 = <&pinctrl_cubox_i_ir>;
};
pwmleds {
compatible = "pwm-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_cubox_i_pwm1>;
front {
active-low;
label = "imx6:red:front";
max-brightness = <248>;
pwms = <&pwm1 0 50000>;
};
};
regulators {
compatible = "simple-bus";
@ -109,6 +122,10 @@
>;
};
pinctrl_cubox_i_pwm1: cubox-i-pwm1-front-led {
fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0>;
};
pinctrl_cubox_i_spdif: cubox-i-spdif {
fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
};
@ -117,6 +134,14 @@
fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>;
};
pinctrl_cubox_i_usbotg_id: cubox-i-usbotg-id {
/*
* The Cubox-i pulls this low, but as it's pointless
* leaving it as a pull-up, even if it is just 10uA.
*/
fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
};
pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus {
fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x4001b0b0>;
};
@ -153,6 +178,8 @@
};
&usbotg {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_cubox_i_usbotg_id>;
vbus-supply = <&reg_usbotg_vbus>;
status = "okay";
};

2
arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
View File

@ -161,7 +161,7 @@
status = "okay";
pmic: ltc3676@3c {
compatible = "ltc,ltc3676";
compatible = "lltc,ltc3676";
reg = <0x3c>;
regulators {

4
arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
View File

@ -220,7 +220,7 @@
};
pmic: ltc3676@3c {
compatible = "ltc,ltc3676";
compatible = "lltc,ltc3676";
reg = <0x3c>;
regulators {
@ -288,7 +288,7 @@
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks 169>;
clocks = <&clks 201>;
VDDA-supply = <&reg_1p8v>;
VDDIO-supply = <&reg_3p3v>;
};

2
arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
View File

@ -234,7 +234,7 @@
};
pmic: ltc3676@3c {
compatible = "ltc,ltc3676";
compatible = "lltc,ltc3676";
reg = <0x3c>;
regulators {

13
arch/arm/boot/dts/imx6qdl-microsom.dtsi
View File

@ -10,14 +10,6 @@
MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
>;
};
pinctrl_microsom_usbotg: microsom-usbotg {
/*
* Similar to pinctrl_usbotg_2, but we want it
* pulled down for a fixed host connection.
*/
fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
};
};
};
@ -26,8 +18,3 @@
pinctrl-0 = <&pinctrl_microsom_uart1>;
status = "okay";
};
&usbotg {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_microsom_usbotg>;
};

2
arch/arm/boot/dts/imx6sl.dtsi
View File

@ -686,7 +686,7 @@
compatible = "fsl,imx6sl-fec", "fsl,imx25-fec";
reg = <0x02188000 0x4000>;
interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_ENET_REF>,
clocks = <&clks IMX6SL_CLK_ENET>,
<&clks IMX6SL_CLK_ENET_REF>;
clock-names = "ipg", "ahb";
status = "disabled";

4
arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
View File

@ -105,7 +105,6 @@
compatible = "ethernet-phy-id0141.0cb0",
"ethernet-phy-ieee802.3-c22";
reg = <0>;
phy-connection-type = "rgmii-id";
};
ethphy1: ethernet-phy@1 {
@ -113,7 +112,6 @@
compatible = "ethernet-phy-id0141.0cb0",
"ethernet-phy-ieee802.3-c22";
reg = <1>;
phy-connection-type = "rgmii-id";
};
};
@ -121,6 +119,7 @@
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
phy-connection-type = "rgmii-id";
};
};
@ -128,5 +127,6 @@
status = "okay";
ethernet1-port@0 {
phy-handle = <&ethphy1>;
phy-connection-type = "rgmii-id";
};
};

6
arch/arm/boot/dts/omap3-beagle-xm.dts
View File

@ -251,6 +251,11 @@
codec {
};
};
twl_power: power {
compatible = "ti,twl4030-power-beagleboard-xm", "ti,twl4030-power-idle-osc-off";
ti,use_poweroff;
};
};
};
@ -301,6 +306,7 @@
};
&uart3 {
interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
};

7
arch/arm/boot/dts/omap3-evm-common.dtsi
View File

@ -50,6 +50,13 @@
gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>;
};
&twl {
twl_power: power {
compatible = "ti,twl4030-power-omap3-evm", "ti,twl4030-power-idle";
ti,use_poweroff;
};
};
&i2c2 {
clock-frequency = <400000>;
};

5
arch/arm/boot/dts/omap3-n900.dts
View File

@ -351,6 +351,11 @@
compatible = "ti,twl4030-audio";
ti,enable-vibra = <1>;
};
twl_power: power {
compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off";
ti,use_poweroff;
};
};
&twl_keypad {

1
arch/arm/boot/dts/omap5.dtsi
View File

@ -45,7 +45,6 @@
operating-points = <
/* kHz uV */
500000 880000
1000000 1060000
1500000 1250000
>;

8
arch/arm/boot/dts/stih415.dtsi
View File

@ -169,8 +169,8 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mii0>;
clock-names = "stmmaceth";
clocks = <&clk_s_a1_ls CLK_GMAC0_PHY>;
clock-names = "stmmaceth", "sti-ethclk";
clocks = <&clk_s_a1_ls CLK_ICN_IF_2>, <&clk_s_a1_ls CLK_GMAC0_PHY>;
};
ethernet1: dwmac@fef08000 {
@ -192,8 +192,8 @@
reset-names = "stmmaceth";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mii1>;
clock-names = "stmmaceth";
clocks = <&clk_s_a0_ls CLK_ETH1_PHY>;
clock-names = "stmmaceth", "sti-ethclk";
clocks = <&clk_s_a0_ls CLK_ICN_REG>, <&clk_s_a0_ls CLK_ETH1_PHY>;
};
rc: rc@fe518000 {

0
arch/arm/boot/dts/stih416-b2020-revE.dts → arch/arm/boot/dts/stih416-b2020e.dts
View File

8
arch/arm/boot/dts/stih416.dtsi
View File

@ -175,8 +175,8 @@
reset-names = "stmmaceth";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mii0>;
clock-names = "stmmaceth";
clocks = <&clk_s_a1_ls CLK_GMAC0_PHY>;
clock-names = "stmmaceth", "sti-ethclk";
clocks = <&clk_s_a1_ls CLK_ICN_IF_2>, <&clk_s_a1_ls CLK_GMAC0_PHY>;
};
ethernet1: dwmac@fef08000 {
@ -197,8 +197,8 @@
reset-names = "stmmaceth";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mii1>;
clock-names = "stmmaceth";
clocks = <&clk_s_a0_ls CLK_ETH1_PHY>;
clock-names = "stmmaceth", "sti-ethclk";
clocks = <&clk_s_a0_ls CLK_ICN_REG>, <&clk_s_a0_ls CLK_ETH1_PHY>;
};
rc: rc@fe518000 {

1
arch/arm/common/scoop.c
View File

@ -182,7 +182,6 @@ static int scoop_probe(struct platform_device *pdev)
struct scoop_config *inf;
struct resource *mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
int ret;
int temp;
if (!mem)
return -EINVAL;

2
arch/arm/configs/bcm_defconfig
View File

@ -94,10 +94,10 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_PWM=y
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
CONFIG_MMC_UNSAFE_RESUME=y
CONFIG_MMC_BLOCK_MINORS=32
CONFIG_MMC_TEST=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_BCM_KONA=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

1
arch/arm/configs/imx_v6_v7_defconfig
View File

@ -186,6 +186,7 @@ CONFIG_VIDEO_MX3=y
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_CODA=y
CONFIG_SOC_CAMERA_OV2640=y
CONFIG_IMX_IPUV3_CORE=y
CONFIG_DRM=y
CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y

4
arch/arm/configs/multi_v7_defconfig
View File

@ -223,12 +223,12 @@ CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_RESET_SUN6I=y
CONFIG_SENSORS_LM90=y
CONFIG_THERMAL=y
CONFIG_DOVE_THERMAL=y
CONFIG_ARMADA_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_ORION_WATCHDOG=y
CONFIG_SUNXI_WATCHDOG=y
CONFIG_MFD_AS3722=y
CONFIG_MFD_BCM590XX=y
CONFIG_MFD_CROS_EC=y
CONFIG_MFD_CROS_EC_SPI=y
CONFIG_MFD_MAX8907=y
@ -240,6 +240,7 @@ CONFIG_MFD_TPS65910=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_AB8500=y
CONFIG_REGULATOR_AS3722=y
CONFIG_REGULATOR_BCM590XX=y
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_MAX8907=y
CONFIG_REGULATOR_PALMAS=y
@ -353,6 +354,7 @@ CONFIG_MFD_NVEC=y
CONFIG_KEYBOARD_NVEC=y
CONFIG_SERIO_NVEC_PS2=y
CONFIG_NVEC_POWER=y
CONFIG_QCOM_GSBI=y
CONFIG_COMMON_CLK_QCOM=y
CONFIG_MSM_GCC_8660=y
CONFIG_MSM_MMCC_8960=y

2
arch/arm/configs/mvebu_v7_defconfig
View File

@ -14,6 +14,7 @@ CONFIG_MACH_ARMADA_370=y
CONFIG_MACH_ARMADA_375=y
CONFIG_MACH_ARMADA_38X=y
CONFIG_MACH_ARMADA_XP=y
CONFIG_MACH_DOVE=y
CONFIG_NEON=y
# CONFIG_CACHE_L2X0 is not set
# CONFIG_SWP_EMULATE is not set
@ -52,6 +53,7 @@ CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_I2C=y
CONFIG_SPI=y
CONFIG_SPI_ORION=y

2
arch/arm/include/asm/mcpm.h
View File

@ -208,8 +208,6 @@ struct sync_struct {
struct mcpm_sync_struct clusters[MAX_NR_CLUSTERS];
};
extern unsigned long sync_phys; /* physical address of *mcpm_sync */
void __mcpm_cpu_going_down(unsigned int cpu, unsigned int cluster);
void __mcpm_cpu_down(unsigned int cpu, unsigned int cluster);
void __mcpm_outbound_leave_critical(unsigned int cluster, int state);

6
arch/arm/include/asm/thread_info.h
View File

@ -114,8 +114,14 @@ static inline struct thread_info *current_thread_info(void)
((unsigned long)(task_thread_info(tsk)->cpu_context.pc))
#define thread_saved_sp(tsk) \
((unsigned long)(task_thread_info(tsk)->cpu_context.sp))
#ifndef CONFIG_THUMB2_KERNEL
#define thread_saved_fp(tsk) \
((unsigned long)(task_thread_info(tsk)->cpu_context.fp))
#else
#define thread_saved_fp(tsk) \
((unsigned long)(task_thread_info(tsk)->cpu_context.r7))
#endif
extern void crunch_task_disable(struct thread_info *);
extern void crunch_task_copy(struct thread_info *, void *);

28
arch/arm/kernel/kprobes-test-arm.c
View File

@ -74,8 +74,6 @@ void kprobe_arm_test_cases(void)
TEST_RRR( op "lt" s " r11, r",11,VAL1,", r",14,N(val),", asr r",7, 6,"")\
TEST_RR( op "gt" s " r12, r13" ", r",14,val, ", ror r",14,7,"")\
TEST_RR( op "le" s " r14, r",0, val, ", r13" ", lsl r",14,8,"")\
TEST_RR( op s " r12, pc" ", r",14,val, ", ror r",14,7,"")\
TEST_RR( op s " r14, r",0, val, ", pc" ", lsl r",14,8,"")\
TEST_R( op "eq" s " r0, r",11,VAL1,", #0xf5") \
TEST_R( op "ne" s " r11, r",0, VAL1,", #0xf5000000") \
TEST_R( op s " r7, r",8, VAL2,", #0x000af000") \
@ -103,8 +101,6 @@ void kprobe_arm_test_cases(void)
TEST_RRR( op "ge r",11,VAL1,", r",14,N(val),", asr r",7, 6,"") \
TEST_RR( op "le r13" ", r",14,val, ", ror r",14,7,"") \
TEST_RR( op "gt r",0, val, ", r13" ", lsl r",14,8,"") \
TEST_RR( op " pc" ", r",14,val, ", ror r",14,7,"") \
TEST_RR( op " r",0, val, ", pc" ", lsl r",14,8,"") \
TEST_R( op "eq r",11,VAL1,", #0xf5") \
TEST_R( op "ne r",0, VAL1,", #0xf5000000") \
TEST_R( op " r",8, VAL2,", #0x000af000")
@ -125,7 +121,6 @@ void kprobe_arm_test_cases(void)
TEST_RR( op "ge" s " r11, r",11,N(val),", asr r",7, 6,"") \
TEST_RR( op "lt" s " r12, r",11,val, ", ror r",14,7,"") \
TEST_R( op "gt" s " r14, r13" ", lsl r",14,8,"") \
TEST_R( op "le" s " r14, pc" ", lsl r",14,8,"") \
TEST( op "eq" s " r0, #0xf5") \
TEST( op "ne" s " r11, #0xf5000000") \
TEST( op s " r7, #0x000af000") \
@ -159,12 +154,19 @@ void kprobe_arm_test_cases(void)
TEST_SUPPORTED("cmp pc, #0x1000");
TEST_SUPPORTED("cmp sp, #0x1000");
/* Data-processing with PC as shift*/
/* Data-processing with PC and a shift count in a register */
TEST_UNSUPPORTED(__inst_arm(0xe15c0f1e) " @ cmp r12, r14, asl pc")
TEST_UNSUPPORTED(__inst_arm(0xe1a0cf1e) " @ mov r12, r14, asl pc")
TEST_UNSUPPORTED(__inst_arm(0xe08caf1e) " @ add r10, r12, r14, asl pc")
TEST_UNSUPPORTED(__inst_arm(0xe151021f) " @ cmp r1, pc, lsl r2")
TEST_UNSUPPORTED(__inst_arm(0xe17f0211) " @ cmn pc, r1, lsl r2")
TEST_UNSUPPORTED(__inst_arm(0xe1a0121f) " @ mov r1, pc, lsl r2")
TEST_UNSUPPORTED(__inst_arm(0xe1a0f211) " @ mov pc, r1, lsl r2")
TEST_UNSUPPORTED(__inst_arm(0xe042131f) " @ sub r1, r2, pc, lsl r3")
TEST_UNSUPPORTED(__inst_arm(0xe1cf1312) " @ bic r1, pc, r2, lsl r3")
TEST_UNSUPPORTED(__inst_arm(0xe081f312) " @ add pc, r1, r2, lsl r3")
/* Data-processing with PC as shift*/
/* Data-processing with PC as a target and status registers updated */
TEST_UNSUPPORTED("movs pc, r1")
TEST_UNSUPPORTED("movs pc, r1, lsl r2")
TEST_UNSUPPORTED("movs pc, #0x10000")
@ -187,14 +189,14 @@ void kprobe_arm_test_cases(void)
TEST_BF_R ("add pc, pc, r",14,2f-1f-8,"")
TEST_BF_R ("add pc, r",14,2f-1f-8,", pc")
TEST_BF_R ("mov pc, r",0,2f,"")
TEST_BF_RR("mov pc, r",0,2f,", asl r",1,0,"")
TEST_BF_R ("add pc, pc, r",14,(2f-1f-8)*2,", asr #1")
TEST_BB( "sub pc, pc, #1b-2b+8")
#if __LINUX_ARM_ARCH__ == 6 && !defined(CONFIG_CPU_V7)
TEST_BB( "sub pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before and after ARMv6 */
#endif
TEST_BB_R( "sub pc, pc, r",14, 1f-2f+8,"")
TEST_BB_R( "rsb pc, r",14,1f-2f+8,", pc")
TEST_RR( "add pc, pc, r",10,-2,", asl r",11,1,"")
TEST_R( "add pc, pc, r",10,-2,", asl #1")
#ifdef CONFIG_THUMB2_KERNEL
TEST_ARM_TO_THUMB_INTERWORK_R("add pc, pc, r",0,3f-1f-8+1,"")
TEST_ARM_TO_THUMB_INTERWORK_R("sub pc, r",0,3f+8+1,", #8")
@ -216,6 +218,7 @@ void kprobe_arm_test_cases(void)
TEST_BB_R("bx r",7,2f,"")
TEST_BF_R("bxeq r",14,2f,"")
#if __LINUX_ARM_ARCH__ >= 5
TEST_R("clz r0, r",0, 0x0,"")
TEST_R("clzeq r7, r",14,0x1,"")
TEST_R("clz lr, r",7, 0xffffffff,"")
@ -337,6 +340,7 @@ void kprobe_arm_test_cases(void)
TEST_UNSUPPORTED(__inst_arm(0xe16f02e1) " @ smultt pc, r1, r2")
TEST_UNSUPPORTED(__inst_arm(0xe16002ef) " @ smultt r0, pc, r2")
TEST_UNSUPPORTED(__inst_arm(0xe1600fe1) " @ smultt r0, r1, pc")
#endif
TEST_GROUP("Multiply and multiply-accumulate")
@ -559,6 +563,7 @@ void kprobe_arm_test_cases(void)
TEST_UNSUPPORTED("ldrsht r1, [r2], #48")
#endif
#if __LINUX_ARM_ARCH__ >= 5
TEST_RPR( "strd r",0, VAL1,", [r",1, 48,", -r",2,24,"]")
TEST_RPR( "strccd r",8, VAL2,", [r",13,0, ", r",12,48,"]")
TEST_RPR( "strd r",4, VAL1,", [r",2, 24,", r",3, 48,"]!")
@ -595,6 +600,7 @@ void kprobe_arm_test_cases(void)
TEST_UNSUPPORTED(__inst_arm(0xe1efc3d0) " @ ldrd r12, [pc, #48]!")
TEST_UNSUPPORTED(__inst_arm(0xe0c9f3d0) " @ ldrd pc, [r9], #48")
TEST_UNSUPPORTED(__inst_arm(0xe0c9e3d0) " @ ldrd lr, [r9], #48")
#endif
TEST_GROUP("Miscellaneous")
@ -1227,7 +1233,9 @@ void kprobe_arm_test_cases(void)
TEST_COPROCESSOR( "mrc"two" 0, 0, r0, cr0, cr0, 0")
COPROCESSOR_INSTRUCTIONS_ST_LD("",e)
#if __LINUX_ARM_ARCH__ >= 5
COPROCESSOR_INSTRUCTIONS_MC_MR("",e)
#endif
TEST_UNSUPPORTED("svc 0")
TEST_UNSUPPORTED("svc 0xffffff")
@ -1287,7 +1295,9 @@ void kprobe_arm_test_cases(void)
TEST( "blx __dummy_thumb_subroutine_odd")
#endif /* __LINUX_ARM_ARCH__ >= 6 */
#if __LINUX_ARM_ARCH__ >= 5
COPROCESSOR_INSTRUCTIONS_ST_LD("2",f)
#endif
#if __LINUX_ARM_ARCH__ >= 6
COPROCESSOR_INSTRUCTIONS_MC_MR("2",f)
#endif

10
arch/arm/kernel/kprobes-test.c
View File

@ -225,6 +225,7 @@ static int pre_handler_called;
static int post_handler_called;
static int jprobe_func_called;
static int kretprobe_handler_called;
static int tests_failed;
#define FUNC_ARG1 0x12345678
#define FUNC_ARG2 0xabcdef
@ -461,6 +462,13 @@ static int run_api_tests(long (*func)(long, long))
pr_info(" jprobe\n");
ret = test_jprobe(func);
#if defined(CONFIG_THUMB2_KERNEL) && !defined(MODULE)
if (ret == -EINVAL) {
pr_err("FAIL: Known longtime bug with jprobe on Thumb kernels\n");
tests_failed = ret;
ret = 0;
}
#endif
if (ret < 0)
return ret;
@ -1671,6 +1679,8 @@ static int __init run_all_tests(void)
#endif
out:
if (ret == 0)
ret = tests_failed;
if (ret == 0)
pr_info("Finished kprobe tests OK\n");
else

4
arch/arm/kernel/perf_event_v7.c
View File

@ -1924,7 +1924,7 @@ static int krait_pmu_get_event_idx(struct pmu_hw_events *cpuc,
struct perf_event *event)
{
int idx;
int bit;
int bit = -1;
unsigned int prefix;
unsigned int region;
unsigned int code;
@ -1953,7 +1953,7 @@ static int krait_pmu_get_event_idx(struct pmu_hw_events *cpuc,
}
idx = armv7pmu_get_event_idx(cpuc, event);
if (idx < 0 && krait_event)
if (idx < 0 && bit >= 0)
clear_bit(bit, cpuc->used_mask);
return idx;

6
arch/arm/kernel/probes-arm.c
View File

@ -341,12 +341,12 @@ static const union decode_item arm_cccc_000x_table[] = {
/* CMP (reg-shift reg) cccc 0001 0101 xxxx xxxx xxxx 0xx1 xxxx */
/* CMN (reg-shift reg) cccc 0001 0111 xxxx xxxx xxxx 0xx1 xxxx */
DECODE_EMULATEX (0x0f900090, 0x01100010, PROBES_DATA_PROCESSING_REG,
REGS(ANY, 0, NOPC, 0, ANY)),
REGS(NOPC, 0, NOPC, 0, NOPC)),
/* MOV (reg-shift reg) cccc 0001 101x xxxx xxxx xxxx 0xx1 xxxx */
/* MVN (reg-shift reg) cccc 0001 111x xxxx xxxx xxxx 0xx1 xxxx */
DECODE_EMULATEX (0x0fa00090, 0x01a00010, PROBES_DATA_PROCESSING_REG,
REGS(0, ANY, NOPC, 0, ANY)),
REGS(0, NOPC, NOPC, 0, NOPC)),
/* AND (reg-shift reg) cccc 0000 000x xxxx xxxx xxxx 0xx1 xxxx */
/* EOR (reg-shift reg) cccc 0000 001x xxxx xxxx xxxx 0xx1 xxxx */
@ -359,7 +359,7 @@ static const union decode_item arm_cccc_000x_table[] = {
/* ORR (reg-shift reg) cccc 0001 100x xxxx xxxx xxxx 0xx1 xxxx */
/* BIC (reg-shift reg) cccc 0001 110x xxxx xxxx xxxx 0xx1 xxxx */
DECODE_EMULATEX (0x0e000090, 0x00000010, PROBES_DATA_PROCESSING_REG,
REGS(ANY, ANY, NOPC, 0, ANY)),
REGS(NOPC, NOPC, NOPC, 0, NOPC)),
DECODE_END
};

7
arch/arm/kernel/ptrace.c
View File

@ -908,7 +908,7 @@ enum ptrace_syscall_dir {
PTRACE_SYSCALL_EXIT,
};
static int tracehook_report_syscall(struct pt_regs *regs,
static void tracehook_report_syscall(struct pt_regs *regs,
enum ptrace_syscall_dir dir)
{
unsigned long ip;
@ -926,7 +926,6 @@ static int tracehook_report_syscall(struct pt_regs *regs,
current_thread_info()->syscall = -1;
regs->ARM_ip = ip;
return current_thread_info()->syscall;
}
asmlinkage int syscall_trace_enter(struct pt_regs *regs, int scno)
@ -938,7 +937,9 @@ asmlinkage int syscall_trace_enter(struct pt_regs *regs, int scno)
return -1;
if (test_thread_flag(TIF_SYSCALL_TRACE))
scno = tracehook_report_syscall(regs, PTRACE_SYSCALL_ENTER);
tracehook_report_syscall(regs, PTRACE_SYSCALL_ENTER);
scno = current_thread_info()->syscall;
if (test_thread_flag(TIF_SYSCALL_TRACEPOINT))
trace_sys_enter(regs, scno);

8
arch/arm/mach-exynos/exynos.c
View File

@ -173,10 +173,8 @@ static struct platform_device exynos_cpuidle = {
void __init exynos_cpuidle_init(void)
{
if (soc_is_exynos5440())
return;
platform_device_register(&exynos_cpuidle);
if (soc_is_exynos4210() || soc_is_exynos5250())
platform_device_register(&exynos_cpuidle);
}
void __init exynos_cpufreq_init(void)
@ -297,7 +295,7 @@ static void __init exynos_dt_machine_init(void)
* This is called from smp_prepare_cpus if we've built for SMP, but
* we still need to set it up for PM and firmware ops if not.
*/
if (!IS_ENABLED(SMP))
if (!IS_ENABLED(CONFIG_SMP))
exynos_sysram_init();
exynos_cpuidle_init();

9
arch/arm/mach-exynos/firmware.c
View File

@ -57,8 +57,13 @@ static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr)
boot_reg = sysram_ns_base_addr + 0x1c;
if (!soc_is_exynos4212() && !soc_is_exynos3250())
boot_reg += 4*cpu;
/*
* Almost all Exynos-series of SoCs that run in secure mode don't need
* additional offset for every CPU, with Exynos4412 being the only
* exception.
*/
if (soc_is_exynos4412())
boot_reg += 4 * cpu;
__raw_writel(boot_addr, boot_reg);
return 0;

8
arch/arm/mach-exynos/hotplug.c
View File

@ -46,13 +46,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
if (cpu == 1)
exynos_cpu_power_down(cpu);
/*
* here's the WFI
*/
asm(".word 0xe320f003\n"
:
:
: "memory", "cc");
wfi();
if (pen_release == cpu_logical_map(cpu)) {
/*

11
arch/arm/mach-exynos/mcpm-exynos.c
View File

@ -25,7 +25,6 @@
#define EXYNOS5420_CPUS_PER_CLUSTER 4
#define EXYNOS5420_NR_CLUSTERS 2
#define MCPM_BOOT_ADDR_OFFSET 0x1c
/*
* The common v7_exit_coherency_flush API could not be used because of the
@ -343,11 +342,13 @@ static int __init exynos_mcpm_init(void)
pr_info("Exynos MCPM support installed\n");
/*
* Future entries into the kernel can now go
* through the cluster entry vectors.
* U-Boot SPL is hardcoded to jump to the start of ns_sram_base_addr
* as part of secondary_cpu_start(). Let's redirect it to the
* mcpm_entry_point().
*/
__raw_writel(virt_to_phys(mcpm_entry_point),
ns_sram_base_addr + MCPM_BOOT_ADDR_OFFSET);
__raw_writel(0xe59f0000, ns_sram_base_addr); /* ldr r0, [pc, #0] */
__raw_writel(0xe12fff10, ns_sram_base_addr + 4); /* bx r0 */
__raw_writel(virt_to_phys(mcpm_entry_point), ns_sram_base_addr + 8);
iounmap(ns_sram_base_addr);

15
arch/arm/mach-exynos/pm.c
View File

@ -300,7 +300,7 @@ static int exynos_pm_suspend(void)
tmp = (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0);
__raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION);
if (!soc_is_exynos5250())
if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9)
exynos_cpu_save_register();
return 0;
@ -334,7 +334,7 @@ static void exynos_pm_resume(void)
if (exynos_pm_central_resume())
goto early_wakeup;
if (!soc_is_exynos5250())
if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9)
exynos_cpu_restore_register();
/* For release retention */
@ -353,7 +353,7 @@ static void exynos_pm_resume(void)
s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save));
if (!soc_is_exynos5250())
if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9)
scu_enable(S5P_VA_SCU);
early_wakeup:
@ -440,15 +440,18 @@ static int exynos_cpu_pm_notifier(struct notifier_block *self,
case CPU_PM_ENTER:
if (cpu == 0) {
exynos_pm_central_suspend();
exynos_cpu_save_register();
if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9)
exynos_cpu_save_register();
}
break;
case CPU_PM_EXIT:
if (cpu == 0) {
if (!soc_is_exynos5250())
if (read_cpuid_part_number() ==
ARM_CPU_PART_CORTEX_A9) {
scu_enable(S5P_VA_SCU);
exynos_cpu_restore_register();
exynos_cpu_restore_register();
}
exynos_pm_central_resume();
}
break;

61
arch/arm/mach-exynos/pm_domains.c
View File

@ -17,6 +17,7 @@
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/pm_domain.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
@ -24,6 +25,8 @@
#include "regs-pmu.h"
#define MAX_CLK_PER_DOMAIN 4
/*
* Exynos specific wrapper around the generic power domain
*/
@ -32,6 +35,9 @@ struct exynos_pm_domain {
char const *name;
bool is_off;
struct generic_pm_domain pd;
struct clk *oscclk;
struct clk *clk[MAX_CLK_PER_DOMAIN];
struct clk *pclk[MAX_CLK_PER_DOMAIN];
};
static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on)
@ -44,6 +50,19 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on)
pd = container_of(domain, struct exynos_pm_domain, pd);
base = pd->base;
/* Set oscclk before powering off a domain*/
if (!power_on) {
int i;
for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
if (IS_ERR(pd->clk[i]))
break;
if (clk_set_parent(pd->clk[i], pd->oscclk))
pr_err("%s: error setting oscclk as parent to clock %d\n",
pd->name, i);
}
}
pwr = power_on ? S5P_INT_LOCAL_PWR_EN : 0;
__raw_writel(pwr, base);
@ -60,6 +79,20 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on)
cpu_relax();
usleep_range(80, 100);
}
/* Restore clocks after powering on a domain*/
if (power_on) {
int i;
for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
if (IS_ERR(pd->clk[i]))
break;
if (clk_set_parent(pd->clk[i], pd->pclk[i]))
pr_err("%s: error setting parent to clock%d\n",
pd->name, i);
}
}
return 0;
}
@ -152,9 +185,11 @@ static __init int exynos4_pm_init_power_domain(void)
for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") {
struct exynos_pm_domain *pd;
int on;
int on, i;
struct device *dev;
pdev = of_find_device_by_node(np);
dev = &pdev->dev;
pd = kzalloc(sizeof(*pd), GFP_KERNEL);
if (!pd) {
@ -170,6 +205,30 @@ static __init int exynos4_pm_init_power_domain(void)
pd->pd.power_on = exynos_pd_power_on;
pd->pd.of_node = np;
pd->oscclk = clk_get(dev, "oscclk");
if (IS_ERR(pd->oscclk))
goto no_clk;
for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
char clk_name[8];
snprintf(clk_name, sizeof(clk_name), "clk%d", i);
pd->clk[i] = clk_get(dev, clk_name);
if (IS_ERR(pd->clk[i]))
break;
snprintf(clk_name, sizeof(clk_name), "pclk%d", i);
pd->pclk[i] = clk_get(dev, clk_name);
if (IS_ERR(pd->pclk[i])) {
clk_put(pd->clk[i]);
pd->clk[i] = ERR_PTR(-EINVAL);
break;
}
}
if (IS_ERR(pd->clk[0]))
clk_put(pd->oscclk);
no_clk:
platform_set_drvdata(pdev, pd);
on = __raw_readl(pd->base + 0x4) & S5P_INT_LOCAL_PWR_EN;

12
arch/arm/mach-imx/Kconfig
View File

@ -734,9 +734,9 @@ config SOC_IMX6
select HAVE_IMX_MMDC
select HAVE_IMX_SRC
select MFD_SYSCON
select PL310_ERRATA_588369 if CACHE_PL310
select PL310_ERRATA_727915 if CACHE_PL310
select PL310_ERRATA_769419 if CACHE_PL310
select PL310_ERRATA_588369 if CACHE_L2X0
select PL310_ERRATA_727915 if CACHE_L2X0
select PL310_ERRATA_769419 if CACHE_L2X0
config SOC_IMX6Q
bool "i.MX6 Quad/DualLite support"
@ -771,9 +771,9 @@ config SOC_VF610
select ARM_GIC
select PINCTRL_VF610
select VF_PIT_TIMER
select PL310_ERRATA_588369 if CACHE_PL310
select PL310_ERRATA_727915 if CACHE_PL310
select PL310_ERRATA_769419 if CACHE_PL310
select PL310_ERRATA_588369 if CACHE_L2X0
select PL310_ERRATA_727915 if CACHE_L2X0
select PL310_ERRATA_769419 if CACHE_L2X0
help
This enable support for Freescale Vybrid VF610 processor.

31
arch/arm/mach-imx/clk-gate2.c
View File

@ -67,8 +67,12 @@ static void clk_gate2_disable(struct clk_hw *hw)
spin_lock_irqsave(gate->lock, flags);
if (gate->share_count && --(*gate->share_count) > 0)
goto out;
if (gate->share_count) {
if (WARN_ON(*gate->share_count == 0))
goto out;
else if (--(*gate->share_count) > 0)
goto out;
}
reg = readl(gate->reg);
reg &= ~(3 << gate->bit_idx);
@ -78,19 +82,26 @@ out:
spin_unlock_irqrestore(gate->lock, flags);
}
static int clk_gate2_is_enabled(struct clk_hw *hw)
static int clk_gate2_reg_is_enabled(void __iomem *reg, u8 bit_idx)
{
u32 reg;
struct clk_gate2 *gate = to_clk_gate2(hw);
u32 val = readl(reg);
reg = readl(gate->reg);
if (((reg >> gate->bit_idx) & 1) == 1)
if (((val >> bit_idx) & 1) == 1)
return 1;
return 0;
}
static int clk_gate2_is_enabled(struct clk_hw *hw)
{
struct clk_gate2 *gate = to_clk_gate2(hw);
if (gate->share_count)
return !!(*gate->share_count);
else
return clk_gate2_reg_is_enabled(gate->reg, gate->bit_idx);
}
static struct clk_ops clk_gate2_ops = {
.enable = clk_gate2_enable,
.disable = clk_gate2_disable,
@ -116,6 +127,10 @@ struct clk *clk_register_gate2(struct device *dev, const char *name,
gate->bit_idx = bit_idx;
gate->flags = clk_gate2_flags;
gate->lock = lock;
/* Initialize share_count per hardware state */
if (share_count)
*share_count = clk_gate2_reg_is_enabled(reg, bit_idx) ? 1 : 0;
gate->share_count = share_count;
init.name = name;

1
arch/arm/mach-imx/clk-imx6sl.c
View File

@ -312,6 +312,7 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
clks[IMX6SL_CLK_ECSPI2] = imx_clk_gate2("ecspi2", "ecspi_root", base + 0x6c, 2);
clks[IMX6SL_CLK_ECSPI3] = imx_clk_gate2("ecspi3", "ecspi_root", base + 0x6c, 4);
clks[IMX6SL_CLK_ECSPI4] = imx_clk_gate2("ecspi4", "ecspi_root", base + 0x6c, 6);
clks[IMX6SL_CLK_ENET] = imx_clk_gate2("enet", "ipg", base + 0x6c, 10);
clks[IMX6SL_CLK_EPIT1] = imx_clk_gate2("epit1", "perclk", base + 0x6c, 12);
clks[IMX6SL_CLK_EPIT2] = imx_clk_gate2("epit2", "perclk", base + 0x6c, 14);
clks[IMX6SL_CLK_EXTERN_AUDIO] = imx_clk_gate2("extern_audio", "extern_audio_podf", base + 0x6c, 16);

26
arch/arm/mach-integrator/integrator_ap.c
View File

@ -480,25 +480,18 @@ static const struct of_device_id ebi_match[] = {
static void __init ap_init_of(void)
{
unsigned long sc_dec;
struct device_node *root;
struct device_node *syscon;
struct device_node *ebi;
struct device *parent;
struct soc_device *soc_dev;
struct soc_device_attribute *soc_dev_attr;
u32 ap_sc_id;
int err;
int i;
/* Here we create an SoC device for the root node */
root = of_find_node_by_path("/");
if (!root)
return;
syscon = of_find_matching_node(root, ap_syscon_match);
syscon = of_find_matching_node(NULL, ap_syscon_match);
if (!syscon)
return;
ebi = of_find_matching_node(root, ebi_match);
ebi = of_find_matching_node(NULL, ebi_match);
if (!ebi)
return;
@ -509,19 +502,17 @@ static void __init ap_init_of(void)
if (!ebi_base)
return;
of_platform_populate(NULL, of_default_bus_match_table,
ap_auxdata_lookup, NULL);
ap_sc_id = readl(ap_syscon_base);
soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
if (!soc_dev_attr)
return;
err = of_property_read_string(root, "compatible",
&soc_dev_attr->soc_id);
if (err)
return;
err = of_property_read_string(root, "model", &soc_dev_attr->machine);
if (err)
return;
soc_dev_attr->soc_id = "XVC";
soc_dev_attr->machine = "Integrator/AP";
soc_dev_attr->family = "Integrator";
soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%c",
'A' + (ap_sc_id & 0x0f));
@ -536,9 +527,6 @@ static void __init ap_init_of(void)
parent = soc_device_to_device(soc_dev);
integrator_init_sysfs(parent, ap_sc_id);
of_platform_populate(root, of_default_bus_match_table,
ap_auxdata_lookup, parent);
sc_dec = readl(ap_syscon_base + INTEGRATOR_SC_DEC_OFFSET);
for (i = 0; i < 4; i++) {
struct lm_device *lmdev;

23
arch/arm/mach-integrator/integrator_cp.c
View File

@ -279,20 +279,13 @@ static const struct of_device_id intcp_syscon_match[] = {
static void __init intcp_init_of(void)
{
struct device_node *root;
struct device_node *cpcon;
struct device *parent;
struct soc_device *soc_dev;
struct soc_device_attribute *soc_dev_attr;
u32 intcp_sc_id;
int err;
/* Here we create an SoC device for the root node */
root = of_find_node_by_path("/");
if (!root)
return;
cpcon = of_find_matching_node(root, intcp_syscon_match);
cpcon = of_find_matching_node(NULL, intcp_syscon_match);
if (!cpcon)
return;
@ -300,19 +293,17 @@ static void __init intcp_init_of(void)
if (!intcp_con_base)
return;
of_platform_populate(NULL, of_default_bus_match_table,
intcp_auxdata_lookup, NULL);
intcp_sc_id = readl(intcp_con_base);
soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
if (!soc_dev_attr)
return;
err = of_property_read_string(root, "compatible",
&soc_dev_attr->soc_id);
if (err)
return;
err = of_property_read_string(root, "model", &soc_dev_attr->machine);
if (err)
return;
soc_dev_attr->soc_id = "XCV";
soc_dev_attr->machine = "Integrator/CP";
soc_dev_attr->family = "Integrator";
soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%c",
'A' + (intcp_sc_id & 0x0f));
@ -326,8 +317,6 @@ static void __init intcp_init_of(void)
parent = soc_device_to_device(soc_dev);
integrator_init_sysfs(parent, intcp_sc_id);
of_platform_populate(root, of_default_bus_match_table,
intcp_auxdata_lookup, parent);
}
static const char * intcp_dt_board_compat[] = {

2
arch/arm/mach-mvebu/Kconfig
View File

@ -10,6 +10,7 @@ menuconfig ARCH_MVEBU
select ZONE_DMA if ARM_LPAE
select ARCH_REQUIRE_GPIOLIB
select PCI_QUIRKS if PCI
select OF_ADDRESS_PCI
if ARCH_MVEBU
@ -17,6 +18,7 @@ config MACH_MVEBU_V7
bool
select ARMADA_370_XP_TIMER
select CACHE_L2X0
select ARM_CPU_SUSPEND
config MACH_ARMADA_370
bool "Marvell Armada 370 boards" if ARCH_MULTI_V7

Some files were not shown because too many files have changed in this diff Show More