pcmcia: setup IRQ to be used by PCMCIA drivers at card insert

Setup the IRQ to be used by PCMCIA drivers already during the device
registration stage, making use of a new function pcmcia_setup_irq().
This will allow us to get rid of quite a lot of indirection in the
future.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
This commit is contained in:
Dominik Brodowski 2010-04-08 20:33:16 +02:00
parent 0cb3c49cdd
commit 6f0f38c45a
4 changed files with 141 additions and 95 deletions

View File

@ -149,6 +149,8 @@ extern struct resource *pcmcia_find_mem_region(u_long base,
int low,
struct pcmcia_socket *s);
void pcmcia_cleanup_irq(struct pcmcia_socket *s);
int pcmcia_setup_irq(struct pcmcia_device *p_dev);
/* cistpl.c */
extern struct bin_attribute pccard_cis_attr;

View File

@ -546,26 +546,32 @@ struct pcmcia_device *pcmcia_device_add(struct pcmcia_socket *s, unsigned int fu
p_dev->function_config = tmp_dev->function_config;
p_dev->io = tmp_dev->io;
p_dev->irq = tmp_dev->irq;
p_dev->irq_v = tmp_dev->irq_v;
kref_get(&p_dev->function_config->ref);
}
/* Add to the list in pcmcia_bus_socket */
list_add(&p_dev->socket_device_list, &s->devices_list);
mutex_unlock(&s->ops_mutex);
if (pcmcia_setup_irq(p_dev))
dev_warn(&p_dev->dev,
"IRQ setup failed -- device might not work\n");
if (!p_dev->function_config) {
dev_dbg(&p_dev->dev, "creating config_t\n");
p_dev->function_config = kzalloc(sizeof(struct config_t),
GFP_KERNEL);
if (!p_dev->function_config)
if (!p_dev->function_config) {
mutex_unlock(&s->ops_mutex);
goto err_unreg;
}
kref_init(&p_dev->function_config->ref);
}
mutex_unlock(&s->ops_mutex);
dev_printk(KERN_NOTICE, &p_dev->dev,
"pcmcia: registering new device %s\n",
p_dev->devname);
"pcmcia: registering new device %s (IRQ: %d)\n",
p_dev->devname, p_dev->irq_v);
pcmcia_device_query(p_dev);
@ -1258,6 +1264,7 @@ static int ds_event(struct pcmcia_socket *skt, event_t event, int priority)
handle_event(skt, event);
mutex_lock(&s->ops_mutex);
destroy_cis_cache(s);
pcmcia_cleanup_irq(s);
mutex_unlock(&s->ops_mutex);
break;

View File

@ -23,6 +23,8 @@
#include <linux/netdevice.h>
#include <linux/slab.h>
#include <asm/irq.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/ss.h>
#include <pcmcia/cs.h>
@ -38,12 +40,6 @@ static int io_speed;
module_param(io_speed, int, 0444);
#ifdef CONFIG_PCMCIA_PROBE
#include <asm/irq.h>
/* mask of IRQs already reserved by other cards, we should avoid using them */
static u8 pcmcia_used_irq[NR_IRQS];
#endif
static int pcmcia_adjust_io_region(struct resource *res, unsigned long start,
unsigned long end, struct pcmcia_socket *s)
{
@ -440,15 +436,11 @@ static int pcmcia_release_irq(struct pcmcia_device *p_dev, irq_req_t *req)
}
if (--s->irq.Config == 0) {
c->state &= ~CONFIG_IRQ_REQ;
s->irq.AssignedIRQ = 0;
}
if (req->Handler)
free_irq(req->AssignedIRQ, p_dev->priv);
#ifdef CONFIG_PCMCIA_PROBE
pcmcia_used_irq[req->AssignedIRQ]--;
#endif
ret = 0;
out:
@ -699,26 +691,14 @@ EXPORT_SYMBOL(pcmcia_request_io);
/** pcmcia_request_irq
*
* Request_irq() reserves an irq for this client.
*
* Also, since Linux only reserves irq's when they are actually
* hooked, we don't guarantee that an irq will still be available
* when the configuration is locked. Now that I think about it,
* there might be a way to fix this using a dummy handler.
*/
#ifdef CONFIG_PCMCIA_PROBE
static irqreturn_t test_action(int cpl, void *dev_id)
{
return IRQ_NONE;
}
#endif
int pcmcia_request_irq(struct pcmcia_device *p_dev, irq_req_t *req)
{
struct pcmcia_socket *s = p_dev->socket;
config_t *c;
int ret = -EINVAL, irq = 0;
int type;
int ret = -EINVAL, irq = p_dev->irq_v;
int type = IRQF_SHARED;
mutex_lock(&s->ops_mutex);
@ -736,63 +716,20 @@ int pcmcia_request_irq(struct pcmcia_device *p_dev, irq_req_t *req)
goto out;
}
/* Decide what type of interrupt we are registering */
type = 0;
if (s->functions > 1) /* All of this ought to be handled higher up */
type = IRQF_SHARED;
else if (req->Attributes & IRQ_TYPE_DYNAMIC_SHARING)
type = IRQF_SHARED;
else
printk(KERN_WARNING "pcmcia: Driver needs updating to support IRQ sharing.\n");
/* If the interrupt is already assigned, it must be the same */
if (s->irq.AssignedIRQ != 0)
irq = s->irq.AssignedIRQ;
#ifdef CONFIG_PCMCIA_PROBE
if (!irq) {
int try;
u32 mask = s->irq_mask;
void *data = p_dev; /* something unique to this device */
for (try = 0; try < 64; try++) {
irq = try % 32;
/* marked as available by driver, and not blocked by userspace? */
if (!((mask >> irq) & 1))
continue;
/* avoid an IRQ which is already used by a PCMCIA card */
if ((try < 32) && pcmcia_used_irq[irq])
continue;
/* register the correct driver, if possible, of check whether
* registering a dummy handle works, i.e. if the IRQ isn't
* marked as used by the kernel resource management core */
ret = request_irq(irq,
(req->Handler) ? req->Handler : test_action,
type,
p_dev->devname,
(req->Handler) ? p_dev->priv : data);
if (!ret) {
if (!req->Handler)
free_irq(irq, data);
break;
}
}
}
#endif
/* only assign PCI irq if no IRQ already assigned */
if (ret && !s->irq.AssignedIRQ) {
if (!s->pci_irq) {
dev_printk(KERN_INFO, &s->dev, "no IRQ found\n");
goto out;
}
type = IRQF_SHARED;
irq = s->pci_irq;
dev_dbg(&s->dev, "no IRQ available\n");
goto out;
}
if (ret && req->Handler) {
if (!(req->Attributes & IRQ_TYPE_DYNAMIC_SHARING)) {
req->Attributes |= IRQ_TYPE_DYNAMIC_SHARING;
dev_printk(KERN_WARNING, &p_dev->dev, "pcmcia: "
"request for exclusive IRQ could not be fulfilled.\n");
dev_printk(KERN_WARNING, &p_dev->dev, "pcmcia: the driver "
"needs updating to supported shared IRQ lines.\n");
}
if (req->Handler) {
ret = request_irq(irq, req->Handler, type,
p_dev->devname, p_dev->priv);
if (ret) {
@ -802,25 +739,13 @@ int pcmcia_request_irq(struct pcmcia_device *p_dev, irq_req_t *req)
}
}
/* Make sure the fact the request type was overridden is passed back */
if (type == IRQF_SHARED && !(req->Attributes & IRQ_TYPE_DYNAMIC_SHARING)) {
req->Attributes |= IRQ_TYPE_DYNAMIC_SHARING;
dev_printk(KERN_WARNING, &p_dev->dev, "pcmcia: "
"request for exclusive IRQ could not be fulfilled.\n");
dev_printk(KERN_WARNING, &p_dev->dev, "pcmcia: the driver "
"needs updating to supported shared IRQ lines.\n");
}
c->irq.Attributes = req->Attributes;
s->irq.AssignedIRQ = req->AssignedIRQ = irq;
req->AssignedIRQ = irq;
s->irq.Config++;
c->state |= CONFIG_IRQ_REQ;
p_dev->_irq = 1;
#ifdef CONFIG_PCMCIA_PROBE
pcmcia_used_irq[irq]++;
#endif
ret = 0;
out:
mutex_unlock(&s->ops_mutex);
@ -829,6 +754,115 @@ out:
EXPORT_SYMBOL(pcmcia_request_irq);
#ifdef CONFIG_PCMCIA_PROBE
/* mask of IRQs already reserved by other cards, we should avoid using them */
static u8 pcmcia_used_irq[NR_IRQS];
static irqreturn_t test_action(int cpl, void *dev_id)
{
return IRQ_NONE;
}
/**
* pcmcia_setup_isa_irq() - determine whether an ISA IRQ can be used
* @p_dev - the associated PCMCIA device
*
* locking note: must be called with ops_mutex locked.
*/
static int pcmcia_setup_isa_irq(struct pcmcia_device *p_dev, int type)
{
struct pcmcia_socket *s = p_dev->socket;
unsigned int try, irq;
u32 mask = s->irq_mask;
int ret = -ENODEV;
for (try = 0; try < 64; try++) {
irq = try % 32;
/* marked as available by driver, not blocked by userspace? */
if (!((mask >> irq) & 1))
continue;
/* avoid an IRQ which is already used by another PCMCIA card */
if ((try < 32) && pcmcia_used_irq[irq])
continue;
/* register the correct driver, if possible, to check whether
* registering a dummy handle works, i.e. if the IRQ isn't
* marked as used by the kernel resource management core */
ret = request_irq(irq, test_action, type, p_dev->devname,
p_dev);
if (!ret) {
free_irq(irq, p_dev);
p_dev->irq_v = s->irq.AssignedIRQ = irq;
pcmcia_used_irq[irq]++;
break;
}
}
return ret;
}
void pcmcia_cleanup_irq(struct pcmcia_socket *s)
{
pcmcia_used_irq[s->irq.AssignedIRQ]--;
s->irq.AssignedIRQ = 0;
}
#else /* CONFIG_PCMCIA_PROBE */
static int pcmcia_setup_isa_irq(struct pcmcia_device *p_dev, int type)
{
return -EINVAL;
}
void pcmcia_cleanup_irq(struct pcmcia_socket *s)
{
s->irq.AssignedIRQ = 0;
return;
}
#endif /* CONFIG_PCMCIA_PROBE */
/**
* pcmcia_setup_irq() - determine IRQ to be used for device
* @p_dev - the associated PCMCIA device
*
* locking note: must be called with ops_mutex locked.
*/
int pcmcia_setup_irq(struct pcmcia_device *p_dev)
{
struct pcmcia_socket *s = p_dev->socket;
if (p_dev->irq_v)
return 0;
/* already assigned? */
if (s->irq.AssignedIRQ) {
p_dev->irq_v = s->irq.AssignedIRQ;
return 0;
}
/* prefer an exclusive ISA irq */
if (!pcmcia_setup_isa_irq(p_dev, 0))
return 0;
/* but accept a shared ISA irq */
if (!pcmcia_setup_isa_irq(p_dev, IRQF_SHARED))
return 0;
/* but use the PCI irq otherwise */
if (s->pci_irq) {
p_dev->irq_v = s->irq.AssignedIRQ = s->pci_irq;
return 0;
}
return -EINVAL;
}
/** pcmcia_request_window
*
* Request_window() establishes a mapping between card memory space

View File

@ -95,6 +95,9 @@ struct pcmcia_device {
config_req_t conf;
window_handle_t win;
/* device setup */
unsigned int irq_v; /* do not use directly yet */
/* Is the device suspended? */
u16 suspended:1;