i2c: stub: Add support for SMBus block commands

SMBus block commands are different to I2C block commands since
the returned data is not normally accessible with byte or word
commands on other command offsets. Add linked list of 'block'
commands to support those commands.

Access mechanism is quite simple: Block commands must be written
before they can be read. Subsequent writes can be partial. Block
read commands always return the number of bytes associated with
the longest previous write.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This commit is contained in:
Guenter Roeck 2014-07-17 09:56:03 -07:00 committed by Wolfram Sang
parent 281ec367bf
commit 6f16b75a41
2 changed files with 104 additions and 7 deletions

View File

@ -2,9 +2,9 @@ MODULE: i2c-stub
DESCRIPTION:
This module is a very simple fake I2C/SMBus driver. It implements five
This module is a very simple fake I2C/SMBus driver. It implements six
types of SMBus commands: write quick, (r/w) byte, (r/w) byte data, (r/w)
word data, and (r/w) I2C block data.
word data, (r/w) I2C block data, and (r/w) SMBus block data.
You need to provide chip addresses as a module parameter when loading this
driver, which will then only react to SMBus commands to these addresses.
@ -19,6 +19,14 @@ A pointer register with auto-increment is implemented for all byte
operations. This allows for continuous byte reads like those supported by
EEPROMs, among others.
SMBus block command support is disabled by default, and must be enabled
explicitly by setting the respective bits (0x03000000) in the functionality
module parameter.
SMBus block commands must be written to configure an SMBus command for
SMBus block operations. Writes can be partial. Block read commands always
return the number of bytes selected with the largest write so far.
The typical use-case is like this:
1. load this module
2. use i2cset (from the i2c-tools project) to pre-load some data

View File

@ -27,29 +27,70 @@
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/i2c.h>
#include <linux/list.h>
#define MAX_CHIPS 10
#define STUB_FUNC (I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | \
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | \
I2C_FUNC_SMBUS_I2C_BLOCK)
/*
* Support for I2C_FUNC_SMBUS_BLOCK_DATA is disabled by default and must
* be enabled explicitly by setting the I2C_FUNC_SMBUS_BLOCK_DATA bits
* in the 'functionality' module parameter.
*/
#define STUB_FUNC_DEFAULT \
(I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | \
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | \
I2C_FUNC_SMBUS_I2C_BLOCK)
#define STUB_FUNC_ALL \
(STUB_FUNC_DEFAULT | I2C_FUNC_SMBUS_BLOCK_DATA)
static unsigned short chip_addr[MAX_CHIPS];
module_param_array(chip_addr, ushort, NULL, S_IRUGO);
MODULE_PARM_DESC(chip_addr,
"Chip addresses (up to 10, between 0x03 and 0x77)");
static unsigned long functionality = STUB_FUNC;
static unsigned long functionality = STUB_FUNC_DEFAULT;
module_param(functionality, ulong, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(functionality, "Override functionality bitfield");
struct smbus_block_data {
struct list_head node;
u8 command;
u8 len;
u8 block[I2C_SMBUS_BLOCK_MAX];
};
struct stub_chip {
u8 pointer;
u16 words[256]; /* Byte operations use the LSB as per SMBus
specification */
struct list_head smbus_blocks;
};
static struct stub_chip *stub_chips;
static struct smbus_block_data *stub_find_block(struct device *dev,
struct stub_chip *chip,
u8 command, bool create)
{
struct smbus_block_data *b, *rb = NULL;
list_for_each_entry(b, &chip->smbus_blocks, node) {
if (b->command == command) {
rb = b;
break;
}
}
if (rb == NULL && create) {
rb = devm_kzalloc(dev, sizeof(*rb), GFP_KERNEL);
if (rb == NULL)
return rb;
rb->command = command;
list_add(&rb->node, &chip->smbus_blocks);
}
return rb;
}
/* Return negative errno on error. */
static s32 stub_xfer(struct i2c_adapter *adap, u16 addr, unsigned short flags,
char read_write, u8 command, int size, union i2c_smbus_data *data)
@ -57,6 +98,7 @@ static s32 stub_xfer(struct i2c_adapter *adap, u16 addr, unsigned short flags,
s32 ret;
int i, len;
struct stub_chip *chip = NULL;
struct smbus_block_data *b;
/* Search for the right chip */
for (i = 0; i < MAX_CHIPS && chip_addr[i]; i++) {
@ -148,6 +190,51 @@ static s32 stub_xfer(struct i2c_adapter *adap, u16 addr, unsigned short flags,
ret = 0;
break;
case I2C_SMBUS_BLOCK_DATA:
b = stub_find_block(&adap->dev, chip, command, false);
if (read_write == I2C_SMBUS_WRITE) {
len = data->block[0];
if (len == 0 || len > I2C_SMBUS_BLOCK_MAX) {
ret = -EINVAL;
break;
}
if (b == NULL) {
b = stub_find_block(&adap->dev, chip, command,
true);
if (b == NULL) {
ret = -ENOMEM;
break;
}
}
/* Largest write sets read block length */
if (len > b->len)
b->len = len;
for (i = 0; i < len; i++)
b->block[i] = data->block[i + 1];
/* update for byte and word commands */
chip->words[command] = (b->block[0] << 8) | b->len;
dev_dbg(&adap->dev,
"smbus block data - addr 0x%02x, wrote %d bytes at 0x%02x.\n",
addr, len, command);
} else {
if (b == NULL) {
dev_dbg(&adap->dev,
"SMBus block read command without prior block write not supported\n");
ret = -EOPNOTSUPP;
break;
}
len = b->len;
data->block[0] = len;
for (i = 0; i < len; i++)
data->block[i + 1] = b->block[i];
dev_dbg(&adap->dev,
"smbus block data - addr 0x%02x, read %d bytes at 0x%02x.\n",
addr, len, command);
}
ret = 0;
break;
default:
dev_dbg(&adap->dev, "Unsupported I2C/SMBus command\n");
ret = -EOPNOTSUPP;
@ -159,7 +246,7 @@ static s32 stub_xfer(struct i2c_adapter *adap, u16 addr, unsigned short flags,
static u32 stub_func(struct i2c_adapter *adapter)
{
return STUB_FUNC & functionality;
return STUB_FUNC_ALL & functionality;
}
static const struct i2c_algorithm smbus_algorithm = {
@ -199,6 +286,8 @@ static int __init i2c_stub_init(void)
pr_err("i2c-stub: Out of memory\n");
return -ENOMEM;
}
for (i--; i >= 0; i--)
INIT_LIST_HEAD(&stub_chips[i].smbus_blocks);
ret = i2c_add_adapter(&stub_adapter);
if (ret)