spi: armada-3700: Fix padding when sending not 4-byte aligned data
In 4-byte transfer mode, extra padding/dummy bytes '0xff' would be sent in write operation if TX data is not 4-byte aligned since the SPI data register is always shifted out as whole 4 bytes. Fix this by using the header count feature that allows to transfer 0 to 4 bytes. Use it to actually send the first 1 to 3 bytes of data before the rest of the buffer that will hence be 4-byte aligned. Signed-off-by: Zachary Zhang <zhangzg@marvell.com> Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Zachary Zhang
Mark Brown
parent
747e1f6047
commit
6fd6fd68c9
|
|
@ -99,11 +99,6 @@
|
|||
/* A3700_SPI_IF_TIME_REG */
|
||||
#define A3700_SPI_CLK_CAPT_EDGE BIT(7)
|
||||
|
||||
/* Flags and macros for struct a3700_spi */
|
||||
#define A3700_INSTR_CNT 1
|
||||
#define A3700_ADDR_CNT 3
|
||||
#define A3700_DUMMY_CNT 1
|
||||
|
||||
struct a3700_spi {
|
||||
struct spi_master *master;
|
||||
void __iomem *base;
|
||||
|
|
@ -117,9 +112,6 @@ struct a3700_spi {
|
|||
u8 byte_len;
|
||||
u32 wait_mask;
|
||||
struct completion done;
|
||||
u32 addr_cnt;
|
||||
u32 instr_cnt;
|
||||
size_t hdr_cnt;
|
||||
};
|
||||
|
||||
static u32 spireg_read(struct a3700_spi *a3700_spi, u32 offset)
|
||||
|
|
@ -449,59 +441,43 @@ static void a3700_spi_set_cs(struct spi_device *spi, bool enable)
|
|||
|
||||
static void a3700_spi_header_set(struct a3700_spi *a3700_spi)
|
||||
{
|
||||
u32 instr_cnt = 0, addr_cnt = 0, dummy_cnt = 0;
|
||||
unsigned int addr_cnt;
|
||||
u32 val = 0;
|
||||
|
||||
/* Clear the header registers */
|
||||
spireg_write(a3700_spi, A3700_SPI_IF_INST_REG, 0);
|
||||
spireg_write(a3700_spi, A3700_SPI_IF_ADDR_REG, 0);
|
||||
spireg_write(a3700_spi, A3700_SPI_IF_RMODE_REG, 0);
|
||||
spireg_write(a3700_spi, A3700_SPI_IF_HDR_CNT_REG, 0);
|
||||
|
||||
/* Set header counters */
|
||||
if (a3700_spi->tx_buf) {
|
||||
if (a3700_spi->buf_len <= a3700_spi->instr_cnt) {
|
||||
instr_cnt = a3700_spi->buf_len;
|
||||
} else if (a3700_spi->buf_len <= (a3700_spi->instr_cnt +
|
||||
a3700_spi->addr_cnt)) {
|
||||
instr_cnt = a3700_spi->instr_cnt;
|
||||
addr_cnt = a3700_spi->buf_len - instr_cnt;
|
||||
} else if (a3700_spi->buf_len <= a3700_spi->hdr_cnt) {
|
||||
instr_cnt = a3700_spi->instr_cnt;
|
||||
addr_cnt = a3700_spi->addr_cnt;
|
||||
/* Need to handle the normal write case with 1 byte
|
||||
* data
|
||||
*/
|
||||
if (!a3700_spi->tx_buf[instr_cnt + addr_cnt])
|
||||
dummy_cnt = a3700_spi->buf_len - instr_cnt -
|
||||
addr_cnt;
|
||||
/*
|
||||
* when tx data is not 4 bytes aligned, there will be unexpected
|
||||
* bytes out of SPI output register, since it always shifts out
|
||||
* as whole 4 bytes. This might cause incorrect transaction with
|
||||
* some devices. To avoid that, use SPI header count feature to
|
||||
* transfer up to 3 bytes of data first, and then make the rest
|
||||
* of data 4-byte aligned.
|
||||
*/
|
||||
addr_cnt = a3700_spi->buf_len % 4;
|
||||
if (addr_cnt) {
|
||||
val = (addr_cnt & A3700_SPI_ADDR_CNT_MASK)
|
||||
<< A3700_SPI_ADDR_CNT_BIT;
|
||||
spireg_write(a3700_spi, A3700_SPI_IF_HDR_CNT_REG, val);
|
||||
|
||||
/* Update the buffer length to be transferred */
|
||||
a3700_spi->buf_len -= addr_cnt;
|
||||
|
||||
/* transfer 1~3 bytes through address count */
|
||||
val = 0;
|
||||
while (addr_cnt--) {
|
||||
val = (val << 8) | a3700_spi->tx_buf[0];
|
||||
a3700_spi->tx_buf++;
|
||||
}
|
||||
spireg_write(a3700_spi, A3700_SPI_IF_ADDR_REG, val);
|
||||
}
|
||||
val |= ((instr_cnt & A3700_SPI_INSTR_CNT_MASK)
|
||||
<< A3700_SPI_INSTR_CNT_BIT);
|
||||
val |= ((addr_cnt & A3700_SPI_ADDR_CNT_MASK)
|
||||
<< A3700_SPI_ADDR_CNT_BIT);
|
||||
val |= ((dummy_cnt & A3700_SPI_DUMMY_CNT_MASK)
|
||||
<< A3700_SPI_DUMMY_CNT_BIT);
|
||||
}
|
||||
spireg_write(a3700_spi, A3700_SPI_IF_HDR_CNT_REG, val);
|
||||
|
||||
/* Update the buffer length to be transferred */
|
||||
a3700_spi->buf_len -= (instr_cnt + addr_cnt + dummy_cnt);
|
||||
|
||||
/* Set Instruction */
|
||||
val = 0;
|
||||
while (instr_cnt--) {
|
||||
val = (val << 8) | a3700_spi->tx_buf[0];
|
||||
a3700_spi->tx_buf++;
|
||||
}
|
||||
spireg_write(a3700_spi, A3700_SPI_IF_INST_REG, val);
|
||||
|
||||
/* Set Address */
|
||||
val = 0;
|
||||
while (addr_cnt--) {
|
||||
val = (val << 8) | a3700_spi->tx_buf[0];
|
||||
a3700_spi->tx_buf++;
|
||||
}
|
||||
spireg_write(a3700_spi, A3700_SPI_IF_ADDR_REG, val);
|
||||
}
|
||||
|
||||
static int a3700_is_wfifo_full(struct a3700_spi *a3700_spi)
|
||||
|
|
@ -515,35 +491,12 @@ static int a3700_is_wfifo_full(struct a3700_spi *a3700_spi)
|
|||
static int a3700_spi_fifo_write(struct a3700_spi *a3700_spi)
|
||||
{
|
||||
u32 val;
|
||||
int i = 0;
|
||||
|
||||
while (!a3700_is_wfifo_full(a3700_spi) && a3700_spi->buf_len) {
|
||||
val = 0;
|
||||
if (a3700_spi->buf_len >= 4) {
|
||||
val = cpu_to_le32(*(u32 *)a3700_spi->tx_buf);
|
||||
spireg_write(a3700_spi, A3700_SPI_DATA_OUT_REG, val);
|
||||
|
||||
a3700_spi->buf_len -= 4;
|
||||
a3700_spi->tx_buf += 4;
|
||||
} else {
|
||||
/*
|
||||
* If the remained buffer length is less than 4-bytes,
|
||||
* we should pad the write buffer with all ones. So that
|
||||
* it avoids overwrite the unexpected bytes following
|
||||
* the last one.
|
||||
*/
|
||||
val = GENMASK(31, 0);
|
||||
while (a3700_spi->buf_len) {
|
||||
val &= ~(0xff << (8 * i));
|
||||
val |= *a3700_spi->tx_buf++ << (8 * i);
|
||||
i++;
|
||||
a3700_spi->buf_len--;
|
||||
|
||||
spireg_write(a3700_spi, A3700_SPI_DATA_OUT_REG,
|
||||
val);
|
||||
}
|
||||
break;
|
||||
}
|
||||
val = cpu_to_le32(*(u32 *)a3700_spi->tx_buf);
|
||||
spireg_write(a3700_spi, A3700_SPI_DATA_OUT_REG, val);
|
||||
a3700_spi->buf_len -= 4;
|
||||
a3700_spi->tx_buf += 4;
|
||||
}
|
||||
|
||||
return 0;
|
||||
|
|
@ -648,9 +601,6 @@ static int a3700_spi_transfer_one(struct spi_master *master,
|
|||
a3700_spi->rx_buf = xfer->rx_buf;
|
||||
a3700_spi->buf_len = xfer->len;
|
||||
|
||||
/* SPI transfer headers */
|
||||
a3700_spi_header_set(a3700_spi);
|
||||
|
||||
if (xfer->tx_buf)
|
||||
nbits = xfer->tx_nbits;
|
||||
else if (xfer->rx_buf)
|
||||
|
|
@ -658,6 +608,12 @@ static int a3700_spi_transfer_one(struct spi_master *master,
|
|||
|
||||
a3700_spi_pin_mode_set(a3700_spi, nbits, xfer->rx_buf ? true : false);
|
||||
|
||||
/* Flush the FIFOs */
|
||||
a3700_spi_fifo_flush(a3700_spi);
|
||||
|
||||
/* Transfer first bytes of data when buffer is not 4-byte aligned */
|
||||
a3700_spi_header_set(a3700_spi);
|
||||
|
||||
if (xfer->rx_buf) {
|
||||
/* Set read data length */
|
||||
spireg_write(a3700_spi, A3700_SPI_IF_DIN_CNT_REG,
|
||||
|
|
@ -736,16 +692,11 @@ static int a3700_spi_transfer_one(struct spi_master *master,
|
|||
dev_err(&spi->dev, "wait wfifo empty timed out\n");
|
||||
return -ETIMEDOUT;
|
||||
}
|
||||
} else {
|
||||
/*
|
||||
* If the instruction in SPI_INSTR does not require data
|
||||
* to be written to the SPI device, wait until SPI_RDY
|
||||
* is 1 for the SPI interface to be in idle.
|
||||
*/
|
||||
if (!a3700_spi_transfer_wait(spi, A3700_SPI_XFER_RDY)) {
|
||||
dev_err(&spi->dev, "wait xfer ready timed out\n");
|
||||
return -ETIMEDOUT;
|
||||
}
|
||||
}
|
||||
|
||||
if (!a3700_spi_transfer_wait(spi, A3700_SPI_XFER_RDY)) {
|
||||
dev_err(&spi->dev, "wait xfer ready timed out\n");
|
||||
return -ETIMEDOUT;
|
||||
}
|
||||
|
||||
val = spireg_read(a3700_spi, A3700_SPI_IF_CFG_REG);
|
||||
|
|
@ -837,10 +788,6 @@ static int a3700_spi_probe(struct platform_device *pdev)
|
|||
memset(spi, 0, sizeof(struct a3700_spi));
|
||||
|
||||
spi->master = master;
|
||||
spi->instr_cnt = A3700_INSTR_CNT;
|
||||
spi->addr_cnt = A3700_ADDR_CNT;
|
||||
spi->hdr_cnt = A3700_INSTR_CNT + A3700_ADDR_CNT +
|
||||
A3700_DUMMY_CNT;
|
||||
|
||||
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
spi->base = devm_ioremap_resource(dev, res);
|
||||
|
|
|
|||
Loading…
Reference in New Issue