Merge branch 'linux-2.6' into for-2.6.24

This commit is contained in:
Paul Mackerras 2007-10-03 15:33:17 +10:00
commit 70f227d884
170 changed files with 2331 additions and 1607 deletions

View File

@ -0,0 +1,219 @@
Asynchronous Transfers/Transforms API
1 INTRODUCTION
2 GENEALOGY
3 USAGE
3.1 General format of the API
3.2 Supported operations
3.3 Descriptor management
3.4 When does the operation execute?
3.5 When does the operation complete?
3.6 Constraints
3.7 Example
4 DRIVER DEVELOPER NOTES
4.1 Conformance points
4.2 "My application needs finer control of hardware channels"
5 SOURCE
---
1 INTRODUCTION
The async_tx API provides methods for describing a chain of asynchronous
bulk memory transfers/transforms with support for inter-transactional
dependencies. It is implemented as a dmaengine client that smooths over
the details of different hardware offload engine implementations. Code
that is written to the API can optimize for asynchronous operation and
the API will fit the chain of operations to the available offload
resources.
2 GENEALOGY
The API was initially designed to offload the memory copy and
xor-parity-calculations of the md-raid5 driver using the offload engines
present in the Intel(R) Xscale series of I/O processors. It also built
on the 'dmaengine' layer developed for offloading memory copies in the
network stack using Intel(R) I/OAT engines. The following design
features surfaced as a result:
1/ implicit synchronous path: users of the API do not need to know if
the platform they are running on has offload capabilities. The
operation will be offloaded when an engine is available and carried out
in software otherwise.
2/ cross channel dependency chains: the API allows a chain of dependent
operations to be submitted, like xor->copy->xor in the raid5 case. The
API automatically handles cases where the transition from one operation
to another implies a hardware channel switch.
3/ dmaengine extensions to support multiple clients and operation types
beyond 'memcpy'
3 USAGE
3.1 General format of the API:
struct dma_async_tx_descriptor *
async_<operation>(<op specific parameters>,
enum async_tx_flags flags,
struct dma_async_tx_descriptor *dependency,
dma_async_tx_callback callback_routine,
void *callback_parameter);
3.2 Supported operations:
memcpy - memory copy between a source and a destination buffer
memset - fill a destination buffer with a byte value
xor - xor a series of source buffers and write the result to a
destination buffer
xor_zero_sum - xor a series of source buffers and set a flag if the
result is zero. The implementation attempts to prevent
writes to memory
3.3 Descriptor management:
The return value is non-NULL and points to a 'descriptor' when the operation
has been queued to execute asynchronously. Descriptors are recycled
resources, under control of the offload engine driver, to be reused as
operations complete. When an application needs to submit a chain of
operations it must guarantee that the descriptor is not automatically recycled
before the dependency is submitted. This requires that all descriptors be
acknowledged by the application before the offload engine driver is allowed to
recycle (or free) the descriptor. A descriptor can be acked by one of the
following methods:
1/ setting the ASYNC_TX_ACK flag if no child operations are to be submitted
2/ setting the ASYNC_TX_DEP_ACK flag to acknowledge the parent
descriptor of a new operation.
3/ calling async_tx_ack() on the descriptor.
3.4 When does the operation execute?
Operations do not immediately issue after return from the
async_<operation> call. Offload engine drivers batch operations to
improve performance by reducing the number of mmio cycles needed to
manage the channel. Once a driver-specific threshold is met the driver
automatically issues pending operations. An application can force this
event by calling async_tx_issue_pending_all(). This operates on all
channels since the application has no knowledge of channel to operation
mapping.
3.5 When does the operation complete?
There are two methods for an application to learn about the completion
of an operation.
1/ Call dma_wait_for_async_tx(). This call causes the CPU to spin while
it polls for the completion of the operation. It handles dependency
chains and issuing pending operations.
2/ Specify a completion callback. The callback routine runs in tasklet
context if the offload engine driver supports interrupts, or it is
called in application context if the operation is carried out
synchronously in software. The callback can be set in the call to
async_<operation>, or when the application needs to submit a chain of
unknown length it can use the async_trigger_callback() routine to set a
completion interrupt/callback at the end of the chain.
3.6 Constraints:
1/ Calls to async_<operation> are not permitted in IRQ context. Other
contexts are permitted provided constraint #2 is not violated.
2/ Completion callback routines cannot submit new operations. This
results in recursion in the synchronous case and spin_locks being
acquired twice in the asynchronous case.
3.7 Example:
Perform a xor->copy->xor operation where each operation depends on the
result from the previous operation:
void complete_xor_copy_xor(void *param)
{
printk("complete\n");
}
int run_xor_copy_xor(struct page **xor_srcs,
int xor_src_cnt,
struct page *xor_dest,
size_t xor_len,
struct page *copy_src,
struct page *copy_dest,
size_t copy_len)
{
struct dma_async_tx_descriptor *tx;
tx = async_xor(xor_dest, xor_srcs, 0, xor_src_cnt, xor_len,
ASYNC_TX_XOR_DROP_DST, NULL, NULL, NULL);
tx = async_memcpy(copy_dest, copy_src, 0, 0, copy_len,
ASYNC_TX_DEP_ACK, tx, NULL, NULL);
tx = async_xor(xor_dest, xor_srcs, 0, xor_src_cnt, xor_len,
ASYNC_TX_XOR_DROP_DST | ASYNC_TX_DEP_ACK | ASYNC_TX_ACK,
tx, complete_xor_copy_xor, NULL);
async_tx_issue_pending_all();
}
See include/linux/async_tx.h for more information on the flags. See the
ops_run_* and ops_complete_* routines in drivers/md/raid5.c for more
implementation examples.
4 DRIVER DEVELOPMENT NOTES
4.1 Conformance points:
There are a few conformance points required in dmaengine drivers to
accommodate assumptions made by applications using the async_tx API:
1/ Completion callbacks are expected to happen in tasklet context
2/ dma_async_tx_descriptor fields are never manipulated in IRQ context
3/ Use async_tx_run_dependencies() in the descriptor clean up path to
handle submission of dependent operations
4.2 "My application needs finer control of hardware channels"
This requirement seems to arise from cases where a DMA engine driver is
trying to support device-to-memory DMA. The dmaengine and async_tx
implementations were designed for offloading memory-to-memory
operations; however, there are some capabilities of the dmaengine layer
that can be used for platform-specific channel management.
Platform-specific constraints can be handled by registering the
application as a 'dma_client' and implementing a 'dma_event_callback' to
apply a filter to the available channels in the system. Before showing
how to implement a custom dma_event callback some background of
dmaengine's client support is required.
The following routines in dmaengine support multiple clients requesting
use of a channel:
- dma_async_client_register(struct dma_client *client)
- dma_async_client_chan_request(struct dma_client *client)
dma_async_client_register takes a pointer to an initialized dma_client
structure. It expects that the 'event_callback' and 'cap_mask' fields
are already initialized.
dma_async_client_chan_request triggers dmaengine to notify the client of
all channels that satisfy the capability mask. It is up to the client's
event_callback routine to track how many channels the client needs and
how many it is currently using. The dma_event_callback routine returns a
dma_state_client code to let dmaengine know the status of the
allocation.
Below is the example of how to extend this functionality for
platform-specific filtering of the available channels beyond the
standard capability mask:
static enum dma_state_client
my_dma_client_callback(struct dma_client *client,
struct dma_chan *chan, enum dma_state state)
{
struct dma_device *dma_dev;
struct my_platform_specific_dma *plat_dma_dev;
dma_dev = chan->device;
plat_dma_dev = container_of(dma_dev,
struct my_platform_specific_dma,
dma_dev);
if (!plat_dma_dev->platform_specific_capability)
return DMA_DUP;
. . .
}
5 SOURCE
include/linux/dmaengine.h: core header file for DMA drivers and clients
drivers/dma/dmaengine.c: offload engine channel management routines
drivers/dma/: location for offload engine drivers
include/linux/async_tx.h: core header file for the async_tx api
crypto/async_tx/async_tx.c: async_tx interface to dmaengine and common code
crypto/async_tx/async_memcpy.c: copy offload
crypto/async_tx/async_memset.c: memory fill offload
crypto/async_tx/async_xor.c: xor and xor zero sum offload

View File

@ -94,6 +94,8 @@ Your cooperation is appreciated.
9 = /dev/urandom Faster, less secure random number gen.
10 = /dev/aio Asynchronous I/O notification interface
11 = /dev/kmsg Writes to this come out as printk's
12 = /dev/oldmem Used by crashdump kernels to access
the memory of the kernel that crashed.
1 block RAM disk
0 = /dev/ram0 First RAM disk

View File

@ -1,254 +1,254 @@
** Introduction
This document describes what I managed to discover about the protocol used to
specify force effects to I-Force 2.0 devices. None of this information comes
from Immerse. That's why you should not trust what is written in this
document. This document is intended to help understanding the protocol.
This is not a reference. Comments and corrections are welcome. To contact me,
send an email to: deneux@ifrance.com
** WARNING **
I may not be held responsible for any dammage or harm caused if you try to
send data to your I-Force device based on what you read in this document.
** Preliminary Notes:
All values are hexadecimal with big-endian encoding (msb on the left). Beware,
values inside packets are encoded using little-endian. Bytes whose roles are
unknown are marked ??? Information that needs deeper inspection is marked (?)
** General form of a packet **
This is how packets look when the device uses the rs232 to communicate.
2B OP LEN DATA CS
CS is the checksum. It is equal to the exclusive or of all bytes.
When using USB:
OP DATA
The 2B, LEN and CS fields have disappeared, probably because USB handles frames and
data corruption is handled or unsignificant.
First, I describe effects that are sent by the device to the computer
** Device input state
This packet is used to indicate the state of each button and the value of each
axis
OP= 01 for a joystick, 03 for a wheel
LEN= Varies from device to device
00 X-Axis lsb
01 X-Axis msb
02 Y-Axis lsb, or gas pedal for a wheel
03 Y-Axis msb, or brake pedal for a wheel
04 Throttle
05 Buttons
06 Lower 4 bits: Buttons
Upper 4 bits: Hat
07 Rudder
** Device effects states
OP= 02
LEN= Varies
00 ? Bit 1 (Value 2) is the value of the deadman switch
01 Bit 8 is set if the effect is playing. Bits 0 to 7 are the effect id.
02 ??
03 Address of parameter block changed (lsb)
04 Address of parameter block changed (msb)
05 Address of second parameter block changed (lsb)
... depending on the number of parameter blocks updated
** Force effect **
OP= 01
LEN= 0e
00 Channel (when playing several effects at the same time, each must be assigned a channel)
01 Wave form
Val 00 Constant
Val 20 Square
Val 21 Triangle
Val 22 Sine
Val 23 Sawtooth up
Val 24 Sawtooth down
Val 40 Spring (Force = f(pos))
Val 41 Friction (Force = f(velocity)) and Inertia (Force = f(acceleration))
02 Axes affected and trigger
Bits 4-7: Val 2 = effect along one axis. Byte 05 indicates direction
Val 4 = X axis only. Byte 05 must contain 5a
Val 8 = Y axis only. Byte 05 must contain b4
Val c = X and Y axes. Bytes 05 must contain 60
Bits 0-3: Val 0 = No trigger
Val x+1 = Button x triggers the effect
When the whole byte is 0, cancel the previously set trigger
03-04 Duration of effect (little endian encoding, in ms)
05 Direction of effect, if applicable. Else, see 02 for value to assign.
06-07 Minimum time between triggering.
08-09 Address of periodicity or magnitude parameters
0a-0b Address of attack and fade parameters, or ffff if none.
*or*
08-09 Address of interactive parameters for X-axis, or ffff if not applicable
0a-0b Address of interactive parameters for Y-axis, or ffff if not applicable
0c-0d Delay before execution of effect (little endian encoding, in ms)
** Time based parameters **
*** Attack and fade ***
OP= 02
LEN= 08
00-01 Address where to store the parameteres
02-03 Duration of attack (little endian encoding, in ms)
04 Level at end of attack. Signed byte.
05-06 Duration of fade.
07 Level at end of fade.
*** Magnitude ***
OP= 03
LEN= 03
00-01 Address
02 Level. Signed byte.
*** Periodicity ***
OP= 04
LEN= 07
00-01 Address
02 Magnitude. Signed byte.
03 Offset. Signed byte.
04 Phase. Val 00 = 0 deg, Val 40 = 90 degs.
05-06 Period (little endian encoding, in ms)
** Interactive parameters **
OP= 05
LEN= 0a
00-01 Address
02 Positive Coeff
03 Negative Coeff
04+05 Offset (center)
06+07 Dead band (Val 01F4 = 5000 (decimal))
08 Positive saturation (Val 0a = 1000 (decimal) Val 64 = 10000 (decimal))
09 Negative saturation
The encoding is a bit funny here: For coeffs, these are signed values. The
maximum value is 64 (100 decimal), the min is 9c.
For the offset, the minimum value is FE0C, the maximum value is 01F4.
For the deadband, the minimum value is 0, the max is 03E8.
** Controls **
OP= 41
LEN= 03
00 Channel
01 Start/Stop
Val 00: Stop
Val 01: Start and play once.
Val 41: Start and play n times (See byte 02 below)
02 Number of iterations n.
** Init **
*** Querying features ***
OP= ff
Query command. Length varies according to the query type.
The general format of this packet is:
ff 01 QUERY [INDEX] CHECKSUM
reponses are of the same form:
FF LEN QUERY VALUE_QUERIED CHECKSUM2
where LEN = 1 + length(VALUE_QUERIED)
**** Query ram size ****
QUERY = 42 ('B'uffer size)
The device should reply with the same packet plus two additionnal bytes
containing the size of the memory:
ff 03 42 03 e8 CS would mean that the device has 1000 bytes of ram available.
**** Query number of effects ****
QUERY = 4e ('N'umber of effects)
The device should respond by sending the number of effects that can be played
at the same time (one byte)
ff 02 4e 14 CS would stand for 20 effects.
**** Vendor's id ****
QUERY = 4d ('M'anufacturer)
Query the vendors'id (2 bytes)
**** Product id *****
QUERY = 50 ('P'roduct)
Query the product id (2 bytes)
**** Open device ****
QUERY = 4f ('O'pen)
No data returned.
**** Close device *****
QUERY = 43 ('C')lose
No data returned.
**** Query effect ****
QUERY = 45 ('E')
Send effect type.
Returns nonzero if supported (2 bytes)
**** Firmware Version ****
QUERY = 56 ('V'ersion)
Sends back 3 bytes - major, minor, subminor
*** Initialisation of the device ***
**** Set Control ****
!!! Device dependent, can be different on different models !!!
OP= 40 <idx> <val> [<val>]
LEN= 2 or 3
00 Idx
Idx 00 Set dead zone (0..2048)
Idx 01 Ignore Deadman sensor (0..1)
Idx 02 Enable comm watchdog (0..1)
Idx 03 Set the strength of the spring (0..100)
Idx 04 Enable or disable the spring (0/1)
Idx 05 Set axis saturation threshold (0..2048)
**** Set Effect State ****
OP= 42 <val>
LEN= 1
00 State
Bit 3 Pause force feedback
Bit 2 Enable force feedback
Bit 0 Stop all effects
**** Set overall gain ****
OP= 43 <val>
LEN= 1
00 Gain
Val 00 = 0%
Val 40 = 50%
Val 80 = 100%
** Parameter memory **
Each device has a certain amount of memory to store parameters of effects.
The amount of RAM may vary, I encountered values from 200 to 1000 bytes. Below
is the amount of memory apparently needed for every set of parameters:
- period : 0c
- magnitude : 02
- attack and fade : 0e
- interactive : 08
** Appendix: How to study the protocol ? **
1. Generate effects using the force editor provided with the DirectX SDK, or use Immersion Studio (freely available at their web site in the developer section: www.immersion.com)
2. Start a soft spying RS232 or USB (depending on where you connected your joystick/wheel). I used ComPortSpy from fCoder (alpha version!)
3. Play the effect, and watch what happens on the spy screen.
A few words about ComPortSpy:
At first glance, this soft seems, hum, well... buggy. In fact, data appear with a few seconds latency. Personnaly, I restart it every time I play an effect.
Remember it's free (as in free beer) and alpha!
** URLS **
Check www.immerse.com for Immersion Studio, and www.fcoder.com for ComPortSpy.
** Author of this document **
Johann Deneux <deneux@ifrance.com>
Home page at http://www.esil.univ-mrs.fr/~jdeneux/projects/ff/
Additions by Vojtech Pavlik.
I-Force is trademark of Immersion Corp.
** Introduction
This document describes what I managed to discover about the protocol used to
specify force effects to I-Force 2.0 devices. None of this information comes
from Immerse. That's why you should not trust what is written in this
document. This document is intended to help understanding the protocol.
This is not a reference. Comments and corrections are welcome. To contact me,
send an email to: deneux@ifrance.com
** WARNING **
I may not be held responsible for any dammage or harm caused if you try to
send data to your I-Force device based on what you read in this document.
** Preliminary Notes:
All values are hexadecimal with big-endian encoding (msb on the left). Beware,
values inside packets are encoded using little-endian. Bytes whose roles are
unknown are marked ??? Information that needs deeper inspection is marked (?)
** General form of a packet **
This is how packets look when the device uses the rs232 to communicate.
2B OP LEN DATA CS
CS is the checksum. It is equal to the exclusive or of all bytes.
When using USB:
OP DATA
The 2B, LEN and CS fields have disappeared, probably because USB handles frames and
data corruption is handled or unsignificant.
First, I describe effects that are sent by the device to the computer
** Device input state
This packet is used to indicate the state of each button and the value of each
axis
OP= 01 for a joystick, 03 for a wheel
LEN= Varies from device to device
00 X-Axis lsb
01 X-Axis msb
02 Y-Axis lsb, or gas pedal for a wheel
03 Y-Axis msb, or brake pedal for a wheel
04 Throttle
05 Buttons
06 Lower 4 bits: Buttons
Upper 4 bits: Hat
07 Rudder
** Device effects states
OP= 02
LEN= Varies
00 ? Bit 1 (Value 2) is the value of the deadman switch
01 Bit 8 is set if the effect is playing. Bits 0 to 7 are the effect id.
02 ??
03 Address of parameter block changed (lsb)
04 Address of parameter block changed (msb)
05 Address of second parameter block changed (lsb)
... depending on the number of parameter blocks updated
** Force effect **
OP= 01
LEN= 0e
00 Channel (when playing several effects at the same time, each must be assigned a channel)
01 Wave form
Val 00 Constant
Val 20 Square
Val 21 Triangle
Val 22 Sine
Val 23 Sawtooth up
Val 24 Sawtooth down
Val 40 Spring (Force = f(pos))
Val 41 Friction (Force = f(velocity)) and Inertia (Force = f(acceleration))
02 Axes affected and trigger
Bits 4-7: Val 2 = effect along one axis. Byte 05 indicates direction
Val 4 = X axis only. Byte 05 must contain 5a
Val 8 = Y axis only. Byte 05 must contain b4
Val c = X and Y axes. Bytes 05 must contain 60
Bits 0-3: Val 0 = No trigger
Val x+1 = Button x triggers the effect
When the whole byte is 0, cancel the previously set trigger
03-04 Duration of effect (little endian encoding, in ms)
05 Direction of effect, if applicable. Else, see 02 for value to assign.
06-07 Minimum time between triggering.
08-09 Address of periodicity or magnitude parameters
0a-0b Address of attack and fade parameters, or ffff if none.
*or*
08-09 Address of interactive parameters for X-axis, or ffff if not applicable
0a-0b Address of interactive parameters for Y-axis, or ffff if not applicable
0c-0d Delay before execution of effect (little endian encoding, in ms)
** Time based parameters **
*** Attack and fade ***
OP= 02
LEN= 08
00-01 Address where to store the parameteres
02-03 Duration of attack (little endian encoding, in ms)
04 Level at end of attack. Signed byte.
05-06 Duration of fade.
07 Level at end of fade.
*** Magnitude ***
OP= 03
LEN= 03
00-01 Address
02 Level. Signed byte.
*** Periodicity ***
OP= 04
LEN= 07
00-01 Address
02 Magnitude. Signed byte.
03 Offset. Signed byte.
04 Phase. Val 00 = 0 deg, Val 40 = 90 degs.
05-06 Period (little endian encoding, in ms)
** Interactive parameters **
OP= 05
LEN= 0a
00-01 Address
02 Positive Coeff
03 Negative Coeff
04+05 Offset (center)
06+07 Dead band (Val 01F4 = 5000 (decimal))
08 Positive saturation (Val 0a = 1000 (decimal) Val 64 = 10000 (decimal))
09 Negative saturation
The encoding is a bit funny here: For coeffs, these are signed values. The
maximum value is 64 (100 decimal), the min is 9c.
For the offset, the minimum value is FE0C, the maximum value is 01F4.
For the deadband, the minimum value is 0, the max is 03E8.
** Controls **
OP= 41
LEN= 03
00 Channel
01 Start/Stop
Val 00: Stop
Val 01: Start and play once.
Val 41: Start and play n times (See byte 02 below)
02 Number of iterations n.
** Init **
*** Querying features ***
OP= ff
Query command. Length varies according to the query type.
The general format of this packet is:
ff 01 QUERY [INDEX] CHECKSUM
reponses are of the same form:
FF LEN QUERY VALUE_QUERIED CHECKSUM2
where LEN = 1 + length(VALUE_QUERIED)
**** Query ram size ****
QUERY = 42 ('B'uffer size)
The device should reply with the same packet plus two additionnal bytes
containing the size of the memory:
ff 03 42 03 e8 CS would mean that the device has 1000 bytes of ram available.
**** Query number of effects ****
QUERY = 4e ('N'umber of effects)
The device should respond by sending the number of effects that can be played
at the same time (one byte)
ff 02 4e 14 CS would stand for 20 effects.
**** Vendor's id ****
QUERY = 4d ('M'anufacturer)
Query the vendors'id (2 bytes)
**** Product id *****
QUERY = 50 ('P'roduct)
Query the product id (2 bytes)
**** Open device ****
QUERY = 4f ('O'pen)
No data returned.
**** Close device *****
QUERY = 43 ('C')lose
No data returned.
**** Query effect ****
QUERY = 45 ('E')
Send effect type.
Returns nonzero if supported (2 bytes)
**** Firmware Version ****
QUERY = 56 ('V'ersion)
Sends back 3 bytes - major, minor, subminor
*** Initialisation of the device ***
**** Set Control ****
!!! Device dependent, can be different on different models !!!
OP= 40 <idx> <val> [<val>]
LEN= 2 or 3
00 Idx
Idx 00 Set dead zone (0..2048)
Idx 01 Ignore Deadman sensor (0..1)
Idx 02 Enable comm watchdog (0..1)
Idx 03 Set the strength of the spring (0..100)
Idx 04 Enable or disable the spring (0/1)
Idx 05 Set axis saturation threshold (0..2048)
**** Set Effect State ****
OP= 42 <val>
LEN= 1
00 State
Bit 3 Pause force feedback
Bit 2 Enable force feedback
Bit 0 Stop all effects
**** Set overall gain ****
OP= 43 <val>
LEN= 1
00 Gain
Val 00 = 0%
Val 40 = 50%
Val 80 = 100%
** Parameter memory **
Each device has a certain amount of memory to store parameters of effects.
The amount of RAM may vary, I encountered values from 200 to 1000 bytes. Below
is the amount of memory apparently needed for every set of parameters:
- period : 0c
- magnitude : 02
- attack and fade : 0e
- interactive : 08
** Appendix: How to study the protocol ? **
1. Generate effects using the force editor provided with the DirectX SDK, or use Immersion Studio (freely available at their web site in the developer section: www.immersion.com)
2. Start a soft spying RS232 or USB (depending on where you connected your joystick/wheel). I used ComPortSpy from fCoder (alpha version!)
3. Play the effect, and watch what happens on the spy screen.
A few words about ComPortSpy:
At first glance, this soft seems, hum, well... buggy. In fact, data appear with a few seconds latency. Personnaly, I restart it every time I play an effect.
Remember it's free (as in free beer) and alpha!
** URLS **
Check www.immerse.com for Immersion Studio, and www.fcoder.com for ComPortSpy.
** Author of this document **
Johann Deneux <deneux@ifrance.com>
Home page at http://www.esil.univ-mrs.fr/~jdeneux/projects/ff/
Additions by Vojtech Pavlik.
I-Force is trademark of Immersion Corp.

View File

@ -882,7 +882,7 @@ static u32 handle_block_output(int fd, const struct iovec *iov,
* of the block file (possibly extending it). */
if (off + len > device_len) {
/* Trim it back to the correct length */
ftruncate(dev->fd, device_len);
ftruncate64(dev->fd, device_len);
/* Die, bad Guest, die. */
errx(1, "Write past end %llu+%u", off, len);
}

View File

@ -2624,8 +2624,8 @@ P: Harald Welte
P: Jozsef Kadlecsik
P: Patrick McHardy
M: kaber@trash.net
L: netfilter-devel@lists.netfilter.org
L: netfilter@lists.netfilter.org (subscribers-only)
L: netfilter-devel@vger.kernel.org
L: netfilter@vger.kernel.org
L: coreteam@netfilter.org
W: http://www.netfilter.org/
W: http://www.iptables.org/
@ -2678,7 +2678,7 @@ M: jmorris@namei.org
P: Hideaki YOSHIFUJI
M: yoshfuji@linux-ipv6.org
P: Patrick McHardy
M: kaber@coreworks.de
M: kaber@trash.net
L: netdev@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6.git
S: Maintained

View File

@ -1,8 +1,8 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 23
EXTRAVERSION =-rc6
NAME = Pink Farting Weasel
EXTRAVERSION =-rc9
NAME = Arr Matey! A Hairy Bilge Rat!
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"

View File

@ -338,7 +338,7 @@ pbus_assign_bus_resources(struct pci_bus *bus, struct pci_sys_data *root)
* pcibios_fixup_bus - Called after each bus is probed,
* but before its children are examined.
*/
void __devinit pcibios_fixup_bus(struct pci_bus *bus)
void pcibios_fixup_bus(struct pci_bus *bus)
{
struct pci_sys_data *root = bus->sysdata;
struct pci_dev *dev;
@ -419,7 +419,7 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
/*
* Convert from Linux-centric to bus-centric addresses for bridge devices.
*/
void __devinit
void
pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
struct resource *res)
{

View File

@ -336,7 +336,7 @@ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
if (line >= 0 && line < 16) {
gpio_line_config(line, GPIO_IN);
} else {
gpio_line_config(EP93XX_GPIO_LINE_F(line), GPIO_IN);
gpio_line_config(EP93XX_GPIO_LINE_F(line-16), GPIO_IN);
}
port = line >> 3;

View File

@ -57,7 +57,17 @@ static void l2x0_inv_range(unsigned long start, unsigned long end)
{
unsigned long addr;
start &= ~(CACHE_LINE_SIZE - 1);
if (start & (CACHE_LINE_SIZE - 1)) {
start &= ~(CACHE_LINE_SIZE - 1);
sync_writel(start, L2X0_CLEAN_INV_LINE_PA, 1);
start += CACHE_LINE_SIZE;
}
if (end & (CACHE_LINE_SIZE - 1)) {
end &= ~(CACHE_LINE_SIZE - 1);
sync_writel(end, L2X0_CLEAN_INV_LINE_PA, 1);
}
for (addr = start; addr < end; addr += CACHE_LINE_SIZE)
sync_writel(addr, L2X0_INV_LINE_PA, 1);
cache_sync();

View File

@ -275,7 +275,7 @@ die:
hlt
jmp die
.size die, .-due
.size die, .-die
.section ".initdata", "a"
setup_corrupt:

View File

@ -20,6 +20,7 @@
static int detect_memory_e820(void)
{
int count = 0;
u32 next = 0;
u32 size, id;
u8 err;
@ -27,20 +28,33 @@ static int detect_memory_e820(void)
do {
size = sizeof(struct e820entry);
id = SMAP;
asm("int $0x15; setc %0"
: "=am" (err), "+b" (next), "+d" (id), "+c" (size),
"=m" (*desc)
: "D" (desc), "a" (0xe820));
if (err || id != SMAP)
/* Important: %edx is clobbered by some BIOSes,
so it must be either used for the error output
or explicitly marked clobbered. */
asm("int $0x15; setc %0"
: "=d" (err), "+b" (next), "=a" (id), "+c" (size),
"=m" (*desc)
: "D" (desc), "d" (SMAP), "a" (0xe820));
/* Some BIOSes stop returning SMAP in the middle of
the search loop. We don't know exactly how the BIOS
screwed up the map at that point, we might have a
partial map, the full map, or complete garbage, so
just return failure. */
if (id != SMAP) {
count = 0;
break;
}
if (err)
break;
boot_params.e820_entries++;
count++;
desc++;
} while (next && boot_params.e820_entries < E820MAX);
} while (next && count < E820MAX);
return boot_params.e820_entries;
return boot_params.e820_entries = count;
}
static int detect_memory_e801(void)
@ -89,11 +103,16 @@ static int detect_memory_88(void)
int detect_memory(void)
{
int err = -1;
if (detect_memory_e820() > 0)
return 0;
err = 0;
if (!detect_memory_e801())
return 0;
err = 0;
return detect_memory_88();
if (!detect_memory_88())
err = 0;
return err;
}

View File

@ -147,7 +147,7 @@ int mode_defined(u16 mode)
}
/* Set mode (without recalc) */
static int raw_set_mode(u16 mode)
static int raw_set_mode(u16 mode, u16 *real_mode)
{
int nmode, i;
struct card_info *card;
@ -165,8 +165,10 @@ static int raw_set_mode(u16 mode)
if ((mode == nmode && visible) ||
mode == mi->mode ||
mode == (mi->y << 8)+mi->x)
mode == (mi->y << 8)+mi->x) {
*real_mode = mi->mode;
return card->set_mode(mi);
}
if (visible)
nmode++;
@ -178,7 +180,7 @@ static int raw_set_mode(u16 mode)
if (mode >= card->xmode_first &&
mode < card->xmode_first+card->xmode_n) {
struct mode_info mix;
mix.mode = mode;
*real_mode = mix.mode = mode;
mix.x = mix.y = 0;
return card->set_mode(&mix);
}
@ -223,6 +225,7 @@ static void vga_recalc_vertical(void)
static int set_mode(u16 mode)
{
int rv;
u16 real_mode;
/* Very special mode numbers... */
if (mode == VIDEO_CURRENT_MODE)
@ -232,13 +235,16 @@ static int set_mode(u16 mode)
else if (mode == EXTENDED_VGA)
mode = VIDEO_8POINT;
rv = raw_set_mode(mode);
rv = raw_set_mode(mode, &real_mode);
if (rv)
return rv;
if (mode & VIDEO_RECALC)
vga_recalc_vertical();
/* Save the canonical mode number for the kernel, not
an alias, size specification or menu position */
boot_params.hdr.vid_mode = real_mode;
return 0;
}

View File

@ -151,51 +151,30 @@ bogus_real_magic:
#define VIDEO_FIRST_V7 0x0900
# Setting of user mode (AX=mode ID) => CF=success
# For now, we only handle VESA modes (0x0200..0x03ff). To handle other
# modes, we should probably compile in the video code from the boot
# directory.
mode_set:
movw %ax, %bx
#if 0
cmpb $0xff, %ah
jz setalias
subb $VIDEO_FIRST_VESA>>8, %bh
cmpb $2, %bh
jb check_vesa
testb $VIDEO_RECALC>>8, %ah
jnz _setrec
cmpb $VIDEO_FIRST_RESOLUTION>>8, %ah
jnc setres
cmpb $VIDEO_FIRST_SPECIAL>>8, %ah
jz setspc
cmpb $VIDEO_FIRST_V7>>8, %ah
jz setv7
#endif
cmpb $VIDEO_FIRST_VESA>>8, %ah
jnc check_vesa
#if 0
orb %ah, %ah
jz setmenu
#endif
decb %ah
# jz setbios Add bios modes later
setbad: clc
setbad:
clc
ret
check_vesa:
subb $VIDEO_FIRST_VESA>>8, %bh
orw $0x4000, %bx # Use linear frame buffer
movw $0x4f02, %ax # VESA BIOS mode set call
int $0x10
cmpw $0x004f, %ax # AL=4f if implemented
jnz _setbad # AH=0 if OK
jnz setbad # AH=0 if OK
stc
ret
_setbad: jmp setbad
.code32
ALIGN

View File

@ -559,6 +559,9 @@ void xen_exit_mmap(struct mm_struct *mm)
put_cpu();
spin_lock(&mm->page_table_lock);
xen_pgd_unpin(mm->pgd);
/* pgd may not be pinned in the error exit path of execve */
if (PagePinned(virt_to_page(mm->pgd)))
xen_pgd_unpin(mm->pgd);
spin_unlock(&mm->page_table_lock);
}

View File

@ -177,10 +177,7 @@ handle_real_irq:
outb(cached_master_mask, PIC_MASTER_IMR);
outb(0x60+irq,PIC_MASTER_CMD); /* 'Specific EOI to master */
}
#ifdef CONFIG_MIPS_MT_SMTC
if (irq_hwmask[irq] & ST0_IM)
set_c0_status(irq_hwmask[irq] & ST0_IM);
#endif /* CONFIG_MIPS_MT_SMTC */
smtc_im_ack_irq(irq);
spin_unlock_irqrestore(&i8259A_lock, flags);
return;

View File

@ -52,11 +52,8 @@ static void level_mask_and_ack_msc_irq(unsigned int irq)
mask_msc_irq(irq);
if (!cpu_has_veic)
MSCIC_WRITE(MSC01_IC_EOI, 0);
#ifdef CONFIG_MIPS_MT_SMTC
/* This actually needs to be a call into platform code */
if (irq_hwmask[irq] & ST0_IM)
set_c0_status(irq_hwmask[irq] & ST0_IM);
#endif /* CONFIG_MIPS_MT_SMTC */
smtc_im_ack_irq(irq);
}
/*
@ -73,10 +70,7 @@ static void edge_mask_and_ack_msc_irq(unsigned int irq)
MSCIC_WRITE(MSC01_IC_SUP+irq*8, r | ~MSC01_IC_SUP_EDGE_BIT);
MSCIC_WRITE(MSC01_IC_SUP+irq*8, r);
}
#ifdef CONFIG_MIPS_MT_SMTC
if (irq_hwmask[irq] & ST0_IM)
set_c0_status(irq_hwmask[irq] & ST0_IM);
#endif /* CONFIG_MIPS_MT_SMTC */
smtc_im_ack_irq(irq);
}
/*

View File

@ -74,20 +74,12 @@ EXPORT_SYMBOL_GPL(free_irqno);
*/
void ack_bad_irq(unsigned int irq)
{
smtc_im_ack_irq(irq);
printk("unexpected IRQ # %d\n", irq);
}
atomic_t irq_err_count;
#ifdef CONFIG_MIPS_MT_SMTC
/*
* SMTC Kernel needs to manipulate low-level CPU interrupt mask
* in do_IRQ. These are passed in setup_irq_smtc() and stored
* in this table.
*/
unsigned long irq_hwmask[NR_IRQS];
#endif /* CONFIG_MIPS_MT_SMTC */
/*
* Generic, controller-independent functions:
*/

View File

@ -525,5 +525,5 @@ sys_call_table:
PTR compat_sys_signalfd
PTR compat_sys_timerfd
PTR sys_eventfd
PTR sys_fallocate /* 4320 */
PTR sys32_fallocate /* 4320 */
.size sys_call_table,.-sys_call_table

View File

@ -25,8 +25,11 @@
#include <asm/smtc_proc.h>
/*
* This file should be built into the kernel only if CONFIG_MIPS_MT_SMTC is set.
* SMTC Kernel needs to manipulate low-level CPU interrupt mask
* in do_IRQ. These are passed in setup_irq_smtc() and stored
* in this table.
*/
unsigned long irq_hwmask[NR_IRQS];
#define LOCK_MT_PRA() \
local_irq_save(flags); \

View File

@ -45,6 +45,8 @@ SECTIONS
__dbe_table : { *(__dbe_table) }
__stop___dbe_table = .;
NOTES
RODATA
/* writeable */

View File

@ -41,8 +41,8 @@ static struct platform_device uart8250_device = {
static int __init uart8250_init(void)
{
uart8250_data[0].iobase = (unsigned long) &mace->isa.serial1;
uart8250_data[1].iobase = (unsigned long) &mace->isa.serial1;
uart8250_data[0].membase = (void __iomem *) &mace->isa.serial1;
uart8250_data[1].membase = (void __iomem *) &mace->isa.serial1;
return platform_device_register(&uart8250_device);
}

View File

@ -15,6 +15,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/reboot.h>
@ -35,6 +36,7 @@ unsigned int soc_type;
EXPORT_SYMBOL(soc_type);
unsigned int periph_rev;
unsigned int zbbus_mhz;
EXPORT_SYMBOL(zbbus_mhz);
static unsigned int part_type;

View File

@ -97,6 +97,7 @@
#size-cells = <0>;
interrupt-parent = < &ipic >;
interrupts = <26 8>;
dr_mode = "peripheral";
phy_type = "ulpi";
};

View File

@ -613,6 +613,13 @@ void start_thread(struct pt_regs *regs, unsigned long start, unsigned long sp)
regs->ccr = 0;
regs->gpr[1] = sp;
/*
* We have just cleared all the nonvolatile GPRs, so make
* FULL_REGS(regs) return true. This is necessary to allow
* ptrace to examine the thread immediately after exec.
*/
regs->trap &= ~1UL;
#ifdef CONFIG_PPC32
regs->mq = 0;
regs->nip = start;

View File

@ -76,14 +76,14 @@ int mpc834x_usb_cfg(void)
if (port0_is_dr)
printk(KERN_WARNING
"834x USB port0 can't be used by both DR and MPH!\n");
sicrl |= MPC834X_SICRL_USB0;
sicrl &= ~MPC834X_SICRL_USB0;
}
prop = of_get_property(np, "port1", NULL);
if (prop) {
if (port1_is_dr)
printk(KERN_WARNING
"834x USB port1 can't be used by both DR and MPH!\n");
sicrl |= MPC834X_SICRL_USB1;
sicrl &= ~MPC834X_SICRL_USB1;
}
of_node_put(np);
}

View File

@ -2110,8 +2110,8 @@ struct tree_descr spufs_dir_contents[] = {
{ "mbox_stat", &spufs_mbox_stat_fops, 0444, },
{ "ibox_stat", &spufs_ibox_stat_fops, 0444, },
{ "wbox_stat", &spufs_wbox_stat_fops, 0444, },
{ "signal1", &spufs_signal1_nosched_fops, 0222, },
{ "signal2", &spufs_signal2_nosched_fops, 0222, },
{ "signal1", &spufs_signal1_fops, 0666, },
{ "signal2", &spufs_signal2_fops, 0666, },
{ "signal1_type", &spufs_signal1_type, 0666, },
{ "signal2_type", &spufs_signal2_type, 0666, },
{ "cntl", &spufs_cntl_fops, 0666, },

View File

@ -419,7 +419,7 @@ static void xics_set_affinity(unsigned int virq, cpumask_t cpumask)
* For the moment only implement delivery to all cpus or one cpu.
* Get current irq_server for the given irq
*/
irq_server = get_irq_server(irq, 1);
irq_server = get_irq_server(virq, 1);
if (irq_server == -1) {
char cpulist[128];
cpumask_scnprintf(cpulist, sizeof(cpulist), cpumask);

View File

@ -387,4 +387,4 @@ uint cpm_dpram_phys(u8* addr)
{
return (dpram_pbase + (uint)(addr - dpram_vbase));
}
EXPORT_SYMBOL(cpm_dpram_addr);
EXPORT_SYMBOL(cpm_dpram_phys);

View File

@ -459,7 +459,7 @@ EXPORT_SYMBOL(cpm_dpdump);
void *cpm_dpram_addr(unsigned long offset)
{
return ((immap_t *)IMAP_ADDR)->im_cpm.cp_dpmem + offset;
return (void *)(dpram_vbase + offset);
}
EXPORT_SYMBOL(cpm_dpram_addr);

View File

@ -156,6 +156,8 @@ void __init fill_ebus_device(struct device_node *dp, struct linux_ebus_device *d
dev->prom_node = dp;
regs = of_get_property(dp, "reg", &len);
if (!regs)
len = 0;
if (len % sizeof(struct linux_prom_registers)) {
prom_printf("UGH: proplen for %s was %d, need multiple of %d\n",
dev->prom_node->name, len,

View File

@ -177,7 +177,7 @@ static u32 __user *create_aout32_tables(char __user *p, struct linux_binprm *bpr
get_user(c,p++);
} while (c);
}
put_user(NULL,argv);
put_user(0,argv);
current->mm->arg_end = current->mm->env_start = (unsigned long) p;
while (envc-->0) {
char c;
@ -186,7 +186,7 @@ static u32 __user *create_aout32_tables(char __user *p, struct linux_binprm *bpr
get_user(c,p++);
} while (c);
}
put_user(NULL,envp);
put_user(0,envp);
current->mm->env_end = (unsigned long) p;
return sp;
}

View File

@ -375,7 +375,10 @@ static void __init fill_ebus_device(struct device_node *dp, struct linux_ebus_de
dev->num_addrs = 0;
dev->num_irqs = 0;
} else {
(void) of_get_property(dp, "reg", &len);
const int *regs = of_get_property(dp, "reg", &len);
if (!regs)
len = 0;
dev->num_addrs = len / sizeof(struct linux_prom_registers);
for (i = 0; i < dev->num_addrs; i++)

View File

@ -1,6 +1,6 @@
/* NGcopy_from_user.S: Niagara optimized copy from userspace.
*
* Copyright (C) 2006 David S. Miller (davem@davemloft.net)
* Copyright (C) 2006, 2007 David S. Miller (davem@davemloft.net)
*/
#define EX_LD(x) \
@ -8,8 +8,8 @@
.section .fixup; \
.align 4; \
99: wr %g0, ASI_AIUS, %asi;\
retl; \
mov 1, %o0; \
ret; \
restore %g0, 1, %o0; \
.section __ex_table,"a";\
.align 4; \
.word 98b, 99b; \
@ -24,7 +24,7 @@
#define LOAD(type,addr,dest) type##a [addr] ASI_AIUS, dest
#define LOAD_TWIN(addr_reg,dest0,dest1) \
ldda [addr_reg] ASI_BLK_INIT_QUAD_LDD_AIUS, dest0
#define EX_RETVAL(x) 0
#define EX_RETVAL(x) %g0
#ifdef __KERNEL__
#define PREAMBLE \

View File

@ -1,6 +1,6 @@
/* NGcopy_to_user.S: Niagara optimized copy to userspace.
*
* Copyright (C) 2006 David S. Miller (davem@davemloft.net)
* Copyright (C) 2006, 2007 David S. Miller (davem@davemloft.net)
*/
#define EX_ST(x) \
@ -8,8 +8,8 @@
.section .fixup; \
.align 4; \
99: wr %g0, ASI_AIUS, %asi;\
retl; \
mov 1, %o0; \
ret; \
restore %g0, 1, %o0; \
.section __ex_table,"a";\
.align 4; \
.word 98b, 99b; \
@ -23,7 +23,7 @@
#define FUNC_NAME NGcopy_to_user
#define STORE(type,src,addr) type##a src, [addr] ASI_AIUS
#define STORE_ASI ASI_BLK_INIT_QUAD_LDD_AIUS
#define EX_RETVAL(x) 0
#define EX_RETVAL(x) %g0
#ifdef __KERNEL__
/* Writing to %asi is _expensive_ so we hardcode it.

View File

@ -1,6 +1,6 @@
/* NGmemcpy.S: Niagara optimized memcpy.
*
* Copyright (C) 2006 David S. Miller (davem@davemloft.net)
* Copyright (C) 2006, 2007 David S. Miller (davem@davemloft.net)
*/
#ifdef __KERNEL__
@ -16,6 +16,12 @@
wr %g0, ASI_PNF, %asi
#endif
#ifdef __sparc_v9__
#define SAVE_AMOUNT 128
#else
#define SAVE_AMOUNT 64
#endif
#ifndef STORE_ASI
#define STORE_ASI ASI_BLK_INIT_QUAD_LDD_P
#endif
@ -50,7 +56,11 @@
#endif
#ifndef STORE_INIT
#ifndef SIMULATE_NIAGARA_ON_NON_NIAGARA
#define STORE_INIT(src,addr) stxa src, [addr] %asi
#else
#define STORE_INIT(src,addr) stx src, [addr + 0x00]
#endif
#endif
#ifndef FUNC_NAME
@ -73,18 +83,19 @@
.globl FUNC_NAME
.type FUNC_NAME,#function
FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */
srlx %o2, 31, %g2
FUNC_NAME: /* %i0=dst, %i1=src, %i2=len */
PREAMBLE
save %sp, -SAVE_AMOUNT, %sp
srlx %i2, 31, %g2
cmp %g2, 0
tne %xcc, 5
PREAMBLE
mov %o0, GLOBAL_SPARE
cmp %o2, 0
mov %i0, %o0
cmp %i2, 0
be,pn %XCC, 85f
or %o0, %o1, %o3
cmp %o2, 16
or %o0, %i1, %i3
cmp %i2, 16
blu,a,pn %XCC, 80f
or %o3, %o2, %o3
or %i3, %i2, %i3
/* 2 blocks (128 bytes) is the minimum we can do the block
* copy with. We need to ensure that we'll iterate at least
@ -93,31 +104,31 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */
* to (64 - 1) bytes from the length before we perform the
* block copy loop.
*/
cmp %o2, (2 * 64)
cmp %i2, (2 * 64)
blu,pt %XCC, 70f
andcc %o3, 0x7, %g0
andcc %i3, 0x7, %g0
/* %o0: dst
* %o1: src
* %o2: len (known to be >= 128)
* %i1: src
* %i2: len (known to be >= 128)
*
* The block copy loops will use %o4/%o5,%g2/%g3 as
* The block copy loops will use %i4/%i5,%g2/%g3 as
* temporaries while copying the data.
*/
LOAD(prefetch, %o1, #one_read)
LOAD(prefetch, %i1, #one_read)
wr %g0, STORE_ASI, %asi
/* Align destination on 64-byte boundary. */
andcc %o0, (64 - 1), %o4
andcc %o0, (64 - 1), %i4
be,pt %XCC, 2f
sub %o4, 64, %o4
sub %g0, %o4, %o4 ! bytes to align dst
sub %o2, %o4, %o2
1: subcc %o4, 1, %o4
EX_LD(LOAD(ldub, %o1, %g1))
sub %i4, 64, %i4
sub %g0, %i4, %i4 ! bytes to align dst
sub %i2, %i4, %i2
1: subcc %i4, 1, %i4
EX_LD(LOAD(ldub, %i1, %g1))
EX_ST(STORE(stb, %g1, %o0))
add %o1, 1, %o1
add %i1, 1, %i1
bne,pt %XCC, 1b
add %o0, 1, %o0
@ -136,111 +147,155 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */
* aligned store data at a time, this is easy to ensure.
*/
2:
andcc %o1, (16 - 1), %o4
andn %o2, (64 - 1), %g1 ! block copy loop iterator
sub %o2, %g1, %o2 ! final sub-block copy bytes
andcc %i1, (16 - 1), %i4
andn %i2, (64 - 1), %g1 ! block copy loop iterator
be,pt %XCC, 50f
cmp %o4, 8
be,a,pt %XCC, 10f
sub %o1, 0x8, %o1
sub %i2, %g1, %i2 ! final sub-block copy bytes
cmp %i4, 8
be,pt %XCC, 10f
sub %i1, %i4, %i1
/* Neither 8-byte nor 16-byte aligned, shift and mask. */
mov %g1, %o4
and %o1, 0x7, %g1
sll %g1, 3, %g1
mov 64, %o3
andn %o1, 0x7, %o1
EX_LD(LOAD(ldx, %o1, %g2))
sub %o3, %g1, %o3
sllx %g2, %g1, %g2
and %i4, 0x7, GLOBAL_SPARE
sll GLOBAL_SPARE, 3, GLOBAL_SPARE
mov 64, %i5
EX_LD(LOAD_TWIN(%i1, %g2, %g3))
sub %i5, GLOBAL_SPARE, %i5
mov 16, %o4
mov 32, %o5
mov 48, %o7
mov 64, %i3
#define SWIVEL_ONE_DWORD(SRC, TMP1, TMP2, PRE_VAL, PRE_SHIFT, POST_SHIFT, DST)\
EX_LD(LOAD(ldx, SRC, TMP1)); \
srlx TMP1, PRE_SHIFT, TMP2; \
or TMP2, PRE_VAL, TMP2; \
EX_ST(STORE_INIT(TMP2, DST)); \
sllx TMP1, POST_SHIFT, PRE_VAL;
bg,pn %XCC, 9f
nop
1: add %o1, 0x8, %o1
SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x00)
add %o1, 0x8, %o1
SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x08)
add %o1, 0x8, %o1
SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x10)
add %o1, 0x8, %o1
SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x18)
add %o1, 32, %o1
LOAD(prefetch, %o1, #one_read)
sub %o1, 32 - 8, %o1
SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x20)
add %o1, 8, %o1
SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x28)
add %o1, 8, %o1
SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x30)
add %o1, 8, %o1
SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x38)
subcc %o4, 64, %o4
bne,pt %XCC, 1b
#define MIX_THREE_WORDS(WORD1, WORD2, WORD3, PRE_SHIFT, POST_SHIFT, TMP) \
sllx WORD1, POST_SHIFT, WORD1; \
srlx WORD2, PRE_SHIFT, TMP; \
sllx WORD2, POST_SHIFT, WORD2; \
or WORD1, TMP, WORD1; \
srlx WORD3, PRE_SHIFT, TMP; \
or WORD2, TMP, WORD2;
8: EX_LD(LOAD_TWIN(%i1 + %o4, %o2, %o3))
MIX_THREE_WORDS(%g2, %g3, %o2, %i5, GLOBAL_SPARE, %o1)
LOAD(prefetch, %i1 + %i3, #one_read)
EX_ST(STORE_INIT(%g2, %o0 + 0x00))
EX_ST(STORE_INIT(%g3, %o0 + 0x08))
EX_LD(LOAD_TWIN(%i1 + %o5, %g2, %g3))
MIX_THREE_WORDS(%o2, %o3, %g2, %i5, GLOBAL_SPARE, %o1)
EX_ST(STORE_INIT(%o2, %o0 + 0x10))
EX_ST(STORE_INIT(%o3, %o0 + 0x18))
EX_LD(LOAD_TWIN(%i1 + %o7, %o2, %o3))
MIX_THREE_WORDS(%g2, %g3, %o2, %i5, GLOBAL_SPARE, %o1)
EX_ST(STORE_INIT(%g2, %o0 + 0x20))
EX_ST(STORE_INIT(%g3, %o0 + 0x28))
EX_LD(LOAD_TWIN(%i1 + %i3, %g2, %g3))
add %i1, 64, %i1
MIX_THREE_WORDS(%o2, %o3, %g2, %i5, GLOBAL_SPARE, %o1)
EX_ST(STORE_INIT(%o2, %o0 + 0x30))
EX_ST(STORE_INIT(%o3, %o0 + 0x38))
subcc %g1, 64, %g1
bne,pt %XCC, 8b
add %o0, 64, %o0
#undef SWIVEL_ONE_DWORD
srl %g1, 3, %g1
ba,pt %XCC, 60f
add %o1, %g1, %o1
add %i1, %i4, %i1
9: EX_LD(LOAD_TWIN(%i1 + %o4, %o2, %o3))
MIX_THREE_WORDS(%g3, %o2, %o3, %i5, GLOBAL_SPARE, %o1)
LOAD(prefetch, %i1 + %i3, #one_read)
EX_ST(STORE_INIT(%g3, %o0 + 0x00))
EX_ST(STORE_INIT(%o2, %o0 + 0x08))
EX_LD(LOAD_TWIN(%i1 + %o5, %g2, %g3))
MIX_THREE_WORDS(%o3, %g2, %g3, %i5, GLOBAL_SPARE, %o1)
EX_ST(STORE_INIT(%o3, %o0 + 0x10))
EX_ST(STORE_INIT(%g2, %o0 + 0x18))
EX_LD(LOAD_TWIN(%i1 + %o7, %o2, %o3))
MIX_THREE_WORDS(%g3, %o2, %o3, %i5, GLOBAL_SPARE, %o1)
EX_ST(STORE_INIT(%g3, %o0 + 0x20))
EX_ST(STORE_INIT(%o2, %o0 + 0x28))
EX_LD(LOAD_TWIN(%i1 + %i3, %g2, %g3))
add %i1, 64, %i1
MIX_THREE_WORDS(%o3, %g2, %g3, %i5, GLOBAL_SPARE, %o1)
EX_ST(STORE_INIT(%o3, %o0 + 0x30))
EX_ST(STORE_INIT(%g2, %o0 + 0x38))
subcc %g1, 64, %g1
bne,pt %XCC, 9b
add %o0, 64, %o0
ba,pt %XCC, 60f
add %i1, %i4, %i1
10: /* Destination is 64-byte aligned, source was only 8-byte
* aligned but it has been subtracted by 8 and we perform
* one twin load ahead, then add 8 back into source when
* we finish the loop.
*/
EX_LD(LOAD_TWIN(%o1, %o4, %o5))
1: add %o1, 16, %o1
EX_LD(LOAD_TWIN(%o1, %g2, %g3))
add %o1, 16 + 32, %o1
LOAD(prefetch, %o1, #one_read)
sub %o1, 32, %o1
EX_LD(LOAD_TWIN(%i1, %o4, %o5))
mov 16, %o7
mov 32, %g2
mov 48, %g3
mov 64, %o1
1: EX_LD(LOAD_TWIN(%i1 + %o7, %o2, %o3))
LOAD(prefetch, %i1 + %o1, #one_read)
EX_ST(STORE_INIT(%o5, %o0 + 0x00)) ! initializes cache line
EX_ST(STORE_INIT(%g2, %o0 + 0x08))
EX_LD(LOAD_TWIN(%o1, %o4, %o5))
add %o1, 16, %o1
EX_ST(STORE_INIT(%g3, %o0 + 0x10))
EX_ST(STORE_INIT(%o2, %o0 + 0x08))
EX_LD(LOAD_TWIN(%i1 + %g2, %o4, %o5))
EX_ST(STORE_INIT(%o3, %o0 + 0x10))
EX_ST(STORE_INIT(%o4, %o0 + 0x18))
EX_LD(LOAD_TWIN(%o1, %g2, %g3))
add %o1, 16, %o1
EX_LD(LOAD_TWIN(%i1 + %g3, %o2, %o3))
EX_ST(STORE_INIT(%o5, %o0 + 0x20))
EX_ST(STORE_INIT(%g2, %o0 + 0x28))
EX_LD(LOAD_TWIN(%o1, %o4, %o5))
EX_ST(STORE_INIT(%g3, %o0 + 0x30))
EX_ST(STORE_INIT(%o2, %o0 + 0x28))
EX_LD(LOAD_TWIN(%i1 + %o1, %o4, %o5))
add %i1, 64, %i1
EX_ST(STORE_INIT(%o3, %o0 + 0x30))
EX_ST(STORE_INIT(%o4, %o0 + 0x38))
subcc %g1, 64, %g1
bne,pt %XCC, 1b
add %o0, 64, %o0
ba,pt %XCC, 60f
add %o1, 0x8, %o1
add %i1, 0x8, %i1
50: /* Destination is 64-byte aligned, and source is 16-byte
* aligned.
*/
1: EX_LD(LOAD_TWIN(%o1, %o4, %o5))
add %o1, 16, %o1
EX_LD(LOAD_TWIN(%o1, %g2, %g3))
add %o1, 16 + 32, %o1
LOAD(prefetch, %o1, #one_read)
sub %o1, 32, %o1
mov 16, %o7
mov 32, %g2
mov 48, %g3
mov 64, %o1
1: EX_LD(LOAD_TWIN(%i1 + %g0, %o4, %o5))
EX_LD(LOAD_TWIN(%i1 + %o7, %o2, %o3))
LOAD(prefetch, %i1 + %o1, #one_read)
EX_ST(STORE_INIT(%o4, %o0 + 0x00)) ! initializes cache line
EX_ST(STORE_INIT(%o5, %o0 + 0x08))
EX_LD(LOAD_TWIN(%o1, %o4, %o5))
add %o1, 16, %o1
EX_ST(STORE_INIT(%g2, %o0 + 0x10))
EX_ST(STORE_INIT(%g3, %o0 + 0x18))
EX_LD(LOAD_TWIN(%o1, %g2, %g3))
add %o1, 16, %o1
EX_LD(LOAD_TWIN(%i1 + %g2, %o4, %o5))
EX_ST(STORE_INIT(%o2, %o0 + 0x10))
EX_ST(STORE_INIT(%o3, %o0 + 0x18))
EX_LD(LOAD_TWIN(%i1 + %g3, %o2, %o3))
add %i1, 64, %i1
EX_ST(STORE_INIT(%o4, %o0 + 0x20))
EX_ST(STORE_INIT(%o5, %o0 + 0x28))
EX_ST(STORE_INIT(%g2, %o0 + 0x30))
EX_ST(STORE_INIT(%g3, %o0 + 0x38))
EX_ST(STORE_INIT(%o2, %o0 + 0x30))
EX_ST(STORE_INIT(%o3, %o0 + 0x38))
subcc %g1, 64, %g1
bne,pt %XCC, 1b
add %o0, 64, %o0
@ -249,47 +304,47 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */
60:
membar #Sync
/* %o2 contains any final bytes still needed to be copied
/* %i2 contains any final bytes still needed to be copied
* over. If anything is left, we copy it one byte at a time.
*/
RESTORE_ASI(%o3)
brz,pt %o2, 85f
sub %o0, %o1, %o3
RESTORE_ASI(%i3)
brz,pt %i2, 85f
sub %o0, %i1, %i3
ba,a,pt %XCC, 90f
.align 64
70: /* 16 < len <= 64 */
bne,pn %XCC, 75f
sub %o0, %o1, %o3
sub %o0, %i1, %i3
72:
andn %o2, 0xf, %o4
and %o2, 0xf, %o2
1: subcc %o4, 0x10, %o4
EX_LD(LOAD(ldx, %o1, %o5))
add %o1, 0x08, %o1
EX_LD(LOAD(ldx, %o1, %g1))
sub %o1, 0x08, %o1
EX_ST(STORE(stx, %o5, %o1 + %o3))
add %o1, 0x8, %o1
EX_ST(STORE(stx, %g1, %o1 + %o3))
andn %i2, 0xf, %i4
and %i2, 0xf, %i2
1: subcc %i4, 0x10, %i4
EX_LD(LOAD(ldx, %i1, %i5))
add %i1, 0x08, %i1
EX_LD(LOAD(ldx, %i1, %g1))
sub %i1, 0x08, %i1
EX_ST(STORE(stx, %i5, %i1 + %i3))
add %i1, 0x8, %i1
EX_ST(STORE(stx, %g1, %i1 + %i3))
bgu,pt %XCC, 1b
add %o1, 0x8, %o1
73: andcc %o2, 0x8, %g0
add %i1, 0x8, %i1
73: andcc %i2, 0x8, %g0
be,pt %XCC, 1f
nop
sub %o2, 0x8, %o2
EX_LD(LOAD(ldx, %o1, %o5))
EX_ST(STORE(stx, %o5, %o1 + %o3))
add %o1, 0x8, %o1
1: andcc %o2, 0x4, %g0
sub %i2, 0x8, %i2
EX_LD(LOAD(ldx, %i1, %i5))
EX_ST(STORE(stx, %i5, %i1 + %i3))
add %i1, 0x8, %i1
1: andcc %i2, 0x4, %g0
be,pt %XCC, 1f
nop
sub %o2, 0x4, %o2
EX_LD(LOAD(lduw, %o1, %o5))
EX_ST(STORE(stw, %o5, %o1 + %o3))
add %o1, 0x4, %o1
1: cmp %o2, 0
sub %i2, 0x4, %i2
EX_LD(LOAD(lduw, %i1, %i5))
EX_ST(STORE(stw, %i5, %i1 + %i3))
add %i1, 0x4, %i1
1: cmp %i2, 0
be,pt %XCC, 85f
nop
ba,pt %xcc, 90f
@ -300,71 +355,71 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */
sub %g1, 0x8, %g1
be,pn %icc, 2f
sub %g0, %g1, %g1
sub %o2, %g1, %o2
sub %i2, %g1, %i2
1: subcc %g1, 1, %g1
EX_LD(LOAD(ldub, %o1, %o5))
EX_ST(STORE(stb, %o5, %o1 + %o3))
EX_LD(LOAD(ldub, %i1, %i5))
EX_ST(STORE(stb, %i5, %i1 + %i3))
bgu,pt %icc, 1b
add %o1, 1, %o1
add %i1, 1, %i1
2: add %o1, %o3, %o0
andcc %o1, 0x7, %g1
2: add %i1, %i3, %o0
andcc %i1, 0x7, %g1
bne,pt %icc, 8f
sll %g1, 3, %g1
cmp %o2, 16
cmp %i2, 16
bgeu,pt %icc, 72b
nop
ba,a,pt %xcc, 73b
8: mov 64, %o3
andn %o1, 0x7, %o1
EX_LD(LOAD(ldx, %o1, %g2))
sub %o3, %g1, %o3
andn %o2, 0x7, %o4
8: mov 64, %i3
andn %i1, 0x7, %i1
EX_LD(LOAD(ldx, %i1, %g2))
sub %i3, %g1, %i3
andn %i2, 0x7, %i4
sllx %g2, %g1, %g2
1: add %o1, 0x8, %o1
EX_LD(LOAD(ldx, %o1, %g3))
subcc %o4, 0x8, %o4
srlx %g3, %o3, %o5
or %o5, %g2, %o5
EX_ST(STORE(stx, %o5, %o0))
1: add %i1, 0x8, %i1
EX_LD(LOAD(ldx, %i1, %g3))
subcc %i4, 0x8, %i4
srlx %g3, %i3, %i5
or %i5, %g2, %i5
EX_ST(STORE(stx, %i5, %o0))
add %o0, 0x8, %o0
bgu,pt %icc, 1b
sllx %g3, %g1, %g2
srl %g1, 3, %g1
andcc %o2, 0x7, %o2
andcc %i2, 0x7, %i2
be,pn %icc, 85f
add %o1, %g1, %o1
add %i1, %g1, %i1
ba,pt %xcc, 90f
sub %o0, %o1, %o3
sub %o0, %i1, %i3
.align 64
80: /* 0 < len <= 16 */
andcc %o3, 0x3, %g0
andcc %i3, 0x3, %g0
bne,pn %XCC, 90f
sub %o0, %o1, %o3
sub %o0, %i1, %i3
1:
subcc %o2, 4, %o2
EX_LD(LOAD(lduw, %o1, %g1))
EX_ST(STORE(stw, %g1, %o1 + %o3))
subcc %i2, 4, %i2
EX_LD(LOAD(lduw, %i1, %g1))
EX_ST(STORE(stw, %g1, %i1 + %i3))
bgu,pt %XCC, 1b
add %o1, 4, %o1
add %i1, 4, %i1
85: retl
mov EX_RETVAL(GLOBAL_SPARE), %o0
85: ret
restore EX_RETVAL(%i0), %g0, %o0
.align 32
90:
subcc %o2, 1, %o2
EX_LD(LOAD(ldub, %o1, %g1))
EX_ST(STORE(stb, %g1, %o1 + %o3))
subcc %i2, 1, %i2
EX_LD(LOAD(ldub, %i1, %g1))
EX_ST(STORE(stb, %g1, %i1 + %i3))
bgu,pt %XCC, 90b
add %o1, 1, %o1
retl
mov EX_RETVAL(GLOBAL_SPARE), %o0
add %i1, 1, %i1
ret
restore EX_RETVAL(%i0), %g0, %o0
.size FUNC_NAME, .-FUNC_NAME

View File

@ -60,14 +60,6 @@ config ZONE_DMA
bool
default y
config QUICKLIST
bool
default y
config NR_QUICK
int
default 2
config ISA
bool

View File

@ -38,6 +38,18 @@
movq %rax,R8(%rsp)
.endm
.macro LOAD_ARGS32 offset
movl \offset(%rsp),%r11d
movl \offset+8(%rsp),%r10d
movl \offset+16(%rsp),%r9d
movl \offset+24(%rsp),%r8d
movl \offset+40(%rsp),%ecx
movl \offset+48(%rsp),%edx
movl \offset+56(%rsp),%esi
movl \offset+64(%rsp),%edi
movl \offset+72(%rsp),%eax
.endm
.macro CFI_STARTPROC32 simple
CFI_STARTPROC \simple
CFI_UNDEFINED r8
@ -152,7 +164,7 @@ sysenter_tracesys:
movq $-ENOSYS,RAX(%rsp) /* really needed? */
movq %rsp,%rdi /* &pt_regs -> arg1 */
call syscall_trace_enter
LOAD_ARGS ARGOFFSET /* reload args from stack in case ptrace changed it */
LOAD_ARGS32 ARGOFFSET /* reload args from stack in case ptrace changed it */
RESTORE_REST
movl %ebp, %ebp
/* no need to do an access_ok check here because rbp has been
@ -255,7 +267,7 @@ cstar_tracesys:
movq $-ENOSYS,RAX(%rsp) /* really needed? */
movq %rsp,%rdi /* &pt_regs -> arg1 */
call syscall_trace_enter
LOAD_ARGS ARGOFFSET /* reload args from stack in case ptrace changed it */
LOAD_ARGS32 ARGOFFSET /* reload args from stack in case ptrace changed it */
RESTORE_REST
movl RSP-ARGOFFSET(%rsp), %r8d
/* no need to do an access_ok check here because r8 has been
@ -334,7 +346,7 @@ ia32_tracesys:
movq $-ENOSYS,RAX(%rsp) /* really needed? */
movq %rsp,%rdi /* &pt_regs -> arg1 */
call syscall_trace_enter
LOAD_ARGS ARGOFFSET /* reload args from stack in case ptrace changed it */
LOAD_ARGS32 ARGOFFSET /* reload args from stack in case ptrace changed it */
RESTORE_REST
jmp ia32_do_syscall
END(ia32_syscall)

View File

@ -81,7 +81,7 @@ wakeup_code:
testl $2, realmode_flags - wakeup_code
jz 1f
mov video_mode - wakeup_code, %ax
call mode_seta
call mode_set
1:
movw $0xb800, %ax
@ -291,52 +291,31 @@ no_longmode:
#define VIDEO_FIRST_V7 0x0900
# Setting of user mode (AX=mode ID) => CF=success
# For now, we only handle VESA modes (0x0200..0x03ff). To handle other
# modes, we should probably compile in the video code from the boot
# directory.
.code16
mode_seta:
mode_set:
movw %ax, %bx
#if 0
cmpb $0xff, %ah
jz setalias
subb $VIDEO_FIRST_VESA>>8, %bh
cmpb $2, %bh
jb check_vesa
testb $VIDEO_RECALC>>8, %ah
jnz _setrec
cmpb $VIDEO_FIRST_RESOLUTION>>8, %ah
jnc setres
cmpb $VIDEO_FIRST_SPECIAL>>8, %ah
jz setspc
cmpb $VIDEO_FIRST_V7>>8, %ah
jz setv7
#endif
cmpb $VIDEO_FIRST_VESA>>8, %ah
jnc check_vesaa
#if 0
orb %ah, %ah
jz setmenu
#endif
decb %ah
# jz setbios Add bios modes later
setbada: clc
setbad:
clc
ret
check_vesaa:
subb $VIDEO_FIRST_VESA>>8, %bh
check_vesa:
orw $0x4000, %bx # Use linear frame buffer
movw $0x4f02, %ax # VESA BIOS mode set call
int $0x10
cmpw $0x004f, %ax # AL=4f if implemented
jnz _setbada # AH=0 if OK
jnz setbad # AH=0 if OK
stc
ret
_setbada: jmp setbada
wakeup_stack_begin: # Stack grows down
.org 0xff0

View File

@ -208,7 +208,6 @@ void cpu_idle (void)
if (__get_cpu_var(cpu_idle_state))
__get_cpu_var(cpu_idle_state) = 0;
check_pgt_cache();
rmb();
idle = pm_idle;
if (!idle)

View File

@ -232,10 +232,6 @@ static int putreg(struct task_struct *child,
{
unsigned long tmp;
/* Some code in the 64bit emulation may not be 64bit clean.
Don't take any chances. */
if (test_tsk_thread_flag(child, TIF_IA32))
value &= 0xffffffff;
switch (regno) {
case offsetof(struct user_regs_struct,fs):
if (value && (value & 3) != 3)

View File

@ -241,7 +241,7 @@ void flush_tlb_mm (struct mm_struct * mm)
}
if (!cpus_empty(cpu_mask))
flush_tlb_others(cpu_mask, mm, FLUSH_ALL);
check_pgt_cache();
preempt_enable();
}
EXPORT_SYMBOL(flush_tlb_mm);

View File

@ -1 +1 @@
#define VDSO_TEXT_OFFSET 0x500
#define VDSO_TEXT_OFFSET 0x600

View File

@ -80,6 +80,7 @@ dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx)
{
enum dma_status status;
struct dma_async_tx_descriptor *iter;
struct dma_async_tx_descriptor *parent;
if (!tx)
return DMA_SUCCESS;
@ -87,8 +88,15 @@ dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx)
/* poll through the dependency chain, return when tx is complete */
do {
iter = tx;
while (iter->cookie == -EBUSY)
iter = iter->parent;
/* find the root of the unsubmitted dependency chain */
while (iter->cookie == -EBUSY) {
parent = iter->parent;
if (parent && parent->cookie == -EBUSY)
iter = iter->parent;
else
break;
}
status = dma_sync_wait(iter->chan, iter->cookie);
} while (status == DMA_IN_PROGRESS || (iter != tx));

View File

@ -102,6 +102,8 @@ static struct acpi_driver acpi_processor_driver = {
.add = acpi_processor_add,
.remove = acpi_processor_remove,
.start = acpi_processor_start,
.suspend = acpi_processor_suspend,
.resume = acpi_processor_resume,
},
};

View File

@ -325,6 +325,23 @@ static void acpi_state_timer_broadcast(struct acpi_processor *pr,
#endif
/*
* Suspend / resume control
*/
static int acpi_idle_suspend;
int acpi_processor_suspend(struct acpi_device * device, pm_message_t state)
{
acpi_idle_suspend = 1;
return 0;
}
int acpi_processor_resume(struct acpi_device * device)
{
acpi_idle_suspend = 0;
return 0;
}
static void acpi_processor_idle(void)
{
struct acpi_processor *pr = NULL;
@ -355,7 +372,7 @@ static void acpi_processor_idle(void)
}
cx = pr->power.state;
if (!cx) {
if (!cx || acpi_idle_suspend) {
if (pm_idle_save)
pm_idle_save();
else

View File

@ -1,5 +1,5 @@
obj-y := poweroff.o wakeup.o
obj-$(CONFIG_ACPI_SLEEP) += main.o
obj-y := wakeup.o
obj-y += main.o
obj-$(CONFIG_ACPI_SLEEP) += proc.o
EXTRA_CFLAGS += $(ACPI_CFLAGS)

View File

@ -15,13 +15,39 @@
#include <linux/dmi.h>
#include <linux/device.h>
#include <linux/suspend.h>
#include <asm/io.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
#include "sleep.h"
u8 sleep_states[ACPI_S_STATE_COUNT];
#ifdef CONFIG_PM_SLEEP
static u32 acpi_target_sleep_state = ACPI_STATE_S0;
#endif
int acpi_sleep_prepare(u32 acpi_state)
{
#ifdef CONFIG_ACPI_SLEEP
/* do we have a wakeup address for S2 and S3? */
if (acpi_state == ACPI_STATE_S3) {
if (!acpi_wakeup_address) {
return -EFAULT;
}
acpi_set_firmware_waking_vector((acpi_physical_address)
virt_to_phys((void *)
acpi_wakeup_address));
}
ACPI_FLUSH_CPU_CACHE();
acpi_enable_wakeup_device_prep(acpi_state);
#endif
acpi_gpe_sleep_prepare(acpi_state);
acpi_enter_sleep_state_prep(acpi_state);
return 0;
}
#ifdef CONFIG_SUSPEND
static struct pm_ops acpi_pm_ops;
@ -275,6 +301,7 @@ int acpi_suspend(u32 acpi_state)
return -EINVAL;
}
#ifdef CONFIG_PM_SLEEP
/**
* acpi_pm_device_sleep_state - return preferred power state of ACPI device
* in the system sleep state given by %acpi_target_sleep_state
@ -349,6 +376,21 @@ int acpi_pm_device_sleep_state(struct device *dev, int wake, int *d_min_p)
*d_min_p = d_min;
return d_max;
}
#endif
static void acpi_power_off_prepare(void)
{
/* Prepare to power off the system */
acpi_sleep_prepare(ACPI_STATE_S5);
}
static void acpi_power_off(void)
{
/* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
printk("%s called\n", __FUNCTION__);
local_irq_disable();
acpi_enter_sleep_state(ACPI_STATE_S5);
}
int __init acpi_sleep_init(void)
{
@ -363,16 +405,17 @@ int __init acpi_sleep_init(void)
if (acpi_disabled)
return 0;
sleep_states[ACPI_STATE_S0] = 1;
printk(KERN_INFO PREFIX "(supports S0");
#ifdef CONFIG_SUSPEND
printk(KERN_INFO PREFIX "(supports");
for (i = ACPI_STATE_S0; i < ACPI_STATE_S4; i++) {
for (i = ACPI_STATE_S1; i < ACPI_STATE_S4; i++) {
status = acpi_get_sleep_type_data(i, &type_a, &type_b);
if (ACPI_SUCCESS(status)) {
sleep_states[i] = 1;
printk(" S%d", i);
}
}
printk(")\n");
pm_set_ops(&acpi_pm_ops);
#endif
@ -382,10 +425,16 @@ int __init acpi_sleep_init(void)
if (ACPI_SUCCESS(status)) {
hibernation_set_ops(&acpi_hibernation_ops);
sleep_states[ACPI_STATE_S4] = 1;
printk(" S4");
}
#else
sleep_states[ACPI_STATE_S4] = 0;
#endif
status = acpi_get_sleep_type_data(ACPI_STATE_S5, &type_a, &type_b);
if (ACPI_SUCCESS(status)) {
sleep_states[ACPI_STATE_S5] = 1;
printk(" S5");
pm_power_off_prepare = acpi_power_off_prepare;
pm_power_off = acpi_power_off;
}
printk(")\n");
return 0;
}

View File

@ -1,75 +0,0 @@
/*
* poweroff.c - ACPI handler for powering off the system.
*
* AKA S5, but it is independent of whether or not the kernel supports
* any other sleep support in the system.
*
* Copyright (c) 2005 Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
*
* This file is released under the GPLv2.
*/
#include <linux/pm.h>
#include <linux/init.h>
#include <acpi/acpi_bus.h>
#include <linux/sysdev.h>
#include <asm/io.h>
#include "sleep.h"
int acpi_sleep_prepare(u32 acpi_state)
{
#ifdef CONFIG_ACPI_SLEEP
/* do we have a wakeup address for S2 and S3? */
if (acpi_state == ACPI_STATE_S3) {
if (!acpi_wakeup_address) {
return -EFAULT;
}
acpi_set_firmware_waking_vector((acpi_physical_address)
virt_to_phys((void *)
acpi_wakeup_address));
}
ACPI_FLUSH_CPU_CACHE();
acpi_enable_wakeup_device_prep(acpi_state);
#endif
acpi_gpe_sleep_prepare(acpi_state);
acpi_enter_sleep_state_prep(acpi_state);
return 0;
}
#ifdef CONFIG_PM
static void acpi_power_off_prepare(void)
{
/* Prepare to power off the system */
acpi_sleep_prepare(ACPI_STATE_S5);
}
static void acpi_power_off(void)
{
/* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
printk("%s called\n", __FUNCTION__);
local_irq_disable();
/* Some SMP machines only can poweroff in boot CPU */
acpi_enter_sleep_state(ACPI_STATE_S5);
}
static int acpi_poweroff_init(void)
{
if (!acpi_disabled) {
u8 type_a, type_b;
acpi_status status;
status =
acpi_get_sleep_type_data(ACPI_STATE_S5, &type_a, &type_b);
if (ACPI_SUCCESS(status)) {
pm_power_off_prepare = acpi_power_off_prepare;
pm_power_off = acpi_power_off;
}
}
return 0;
}
late_initcall(acpi_poweroff_init);
#endif /* CONFIG_PM */

View File

@ -417,7 +417,6 @@ acpi_video_device_lcd_set_level(struct acpi_video_device *device, int level)
arg0.integer.value = level;
status = acpi_evaluate_object(device->dev->handle, "_BCM", &args, NULL);
printk(KERN_DEBUG "set_level status: %x\n", status);
return status;
}
@ -1754,7 +1753,7 @@ static int acpi_video_bus_put_devices(struct acpi_video_bus *video)
static int acpi_video_bus_start_devices(struct acpi_video_bus *video)
{
return acpi_video_bus_DOS(video, 1, 0);
return acpi_video_bus_DOS(video, 0, 0);
}
static int acpi_video_bus_stop_devices(struct acpi_video_bus *video)

View File

@ -418,10 +418,12 @@ static const struct pci_device_id ahci_pci_tbl[] = {
/* ATI */
{ PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */
{ PCI_VDEVICE(ATI, 0x4390), board_ahci_sb600 }, /* ATI SB700 IDE */
{ PCI_VDEVICE(ATI, 0x4391), board_ahci_sb600 }, /* ATI SB700 AHCI */
{ PCI_VDEVICE(ATI, 0x4392), board_ahci_sb600 }, /* ATI SB700 nraid5 */
{ PCI_VDEVICE(ATI, 0x4393), board_ahci_sb600 }, /* ATI SB700 raid5 */
{ PCI_VDEVICE(ATI, 0x4390), board_ahci_sb600 }, /* ATI SB700/800 */
{ PCI_VDEVICE(ATI, 0x4391), board_ahci_sb600 }, /* ATI SB700/800 */
{ PCI_VDEVICE(ATI, 0x4392), board_ahci_sb600 }, /* ATI SB700/800 */
{ PCI_VDEVICE(ATI, 0x4393), board_ahci_sb600 }, /* ATI SB700/800 */
{ PCI_VDEVICE(ATI, 0x4394), board_ahci_sb600 }, /* ATI SB700/800 */
{ PCI_VDEVICE(ATI, 0x4395), board_ahci_sb600 }, /* ATI SB700/800 */
/* VIA */
{ PCI_VDEVICE(VIA, 0x3349), board_ahci_vt8251 }, /* VIA VT8251 */

View File

@ -920,6 +920,13 @@ static void ich_set_dmamode (struct ata_port *ap, struct ata_device *adev)
static int piix_broken_suspend(void)
{
static struct dmi_system_id sysids[] = {
{
.ident = "TECRA M3",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M3"),
},
},
{
.ident = "TECRA M5",
.matches = {

View File

@ -3778,6 +3778,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
{ "Maxtor 6L250S0", "BANC1G10", ATA_HORKAGE_NONCQ },
{ "Maxtor 6B200M0", "BANC1BM0", ATA_HORKAGE_NONCQ },
{ "Maxtor 6B200M0", "BANC1B10", ATA_HORKAGE_NONCQ },
{ "Maxtor 7B250S0", "BANC1B70", ATA_HORKAGE_NONCQ, },
{ "Maxtor 7B300S0", "BANC1B70", ATA_HORKAGE_NONCQ },
{ "Maxtor 7V300F0", "VA111630", ATA_HORKAGE_NONCQ },
{ "HITACHI HDS7250SASUN500G 0621KTAWSD", "K2AOAJ0AHITACHI",
ATA_HORKAGE_NONCQ },
/* NCQ hard hangs device under heavier load, needs hard power cycle */
@ -3794,6 +3797,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
{ "WDC WD740ADFD-00NLR1", NULL, ATA_HORKAGE_NONCQ, },
{ "FUJITSU MHV2080BH", "00840028", ATA_HORKAGE_NONCQ, },
{ "ST9160821AS", "3.CLF", ATA_HORKAGE_NONCQ, },
{ "ST3160812AS", "3.AD", ATA_HORKAGE_NONCQ, },
{ "SAMSUNG HD401LJ", "ZZ100-15", ATA_HORKAGE_NONCQ, },
/* devices which puke on READ_NATIVE_MAX */

View File

@ -297,7 +297,7 @@ void ata_bmdma_start (struct ata_queued_cmd *qc)
dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
iowrite8(dmactl | ATA_DMA_START, ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
/* Strictly, one may wish to issue a readb() here, to
/* Strictly, one may wish to issue an ioread8() here, to
* flush the mmio write. However, control also passes
* to the hardware at this point, and it will interrupt
* us when we are to resume control. So, in effect,
@ -307,6 +307,9 @@ void ata_bmdma_start (struct ata_queued_cmd *qc)
* is expected, so I think it is best to not add a readb()
* without first all the MMIO ATA cards/mobos.
* Or maybe I'm just being paranoid.
*
* FIXME: The posting of this write means I/O starts are
* unneccessarily delayed for MMIO
*/
}

View File

@ -375,8 +375,9 @@ static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev)
int drive_pci = sis_old_port_base(adev);
u16 timing;
/* MWDMA 0-2 and UDMA 0-5 */
const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 };
const u16 udma_bits[] = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000};
const u16 udma_bits[] = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000, 0x8000 };
pci_read_config_word(pdev, drive_pci, &timing);

View File

@ -888,6 +888,16 @@ static inline void sil24_host_intr(struct ata_port *ap)
u32 slot_stat, qc_active;
int rc;
/* If PCIX_IRQ_WOC, there's an inherent race window between
* clearing IRQ pending status and reading PORT_SLOT_STAT
* which may cause spurious interrupts afterwards. This is
* unavoidable and much better than losing interrupts which
* happens if IRQ pending is cleared after reading
* PORT_SLOT_STAT.
*/
if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC)
writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT);
slot_stat = readl(port + PORT_SLOT_STAT);
if (unlikely(slot_stat & HOST_SSTAT_ATTN)) {
@ -895,9 +905,6 @@ static inline void sil24_host_intr(struct ata_port *ap)
return;
}
if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC)
writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT);
qc_active = slot_stat & ~HOST_SSTAT_ATTN;
rc = ata_qc_complete_multiple(ap, qc_active, sil24_finish_qc);
if (rc > 0)
@ -910,7 +917,8 @@ static inline void sil24_host_intr(struct ata_port *ap)
return;
}
if (ata_ratelimit())
/* spurious interrupts are expected if PCIX_IRQ_WOC */
if (!(ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) && ata_ratelimit())
ata_port_printk(ap, KERN_INFO, "spurious interrupt "
"(slot_stat 0x%x active_tag %d sactive 0x%x)\n",
slot_stat, ap->active_tag, ap->sactive);

View File

@ -284,6 +284,7 @@ static ssize_t show_uevent(struct device *dev, struct device_attribute *attr,
/* let the kset specific function add its keys */
pos = data;
memset(envp, 0, sizeof(envp));
retval = kset->uevent_ops->uevent(kset, &dev->kobj,
envp, ARRAY_SIZE(envp),
pos, PAGE_SIZE);

View File

@ -1032,6 +1032,10 @@ int cdrom_open(struct cdrom_device_info *cdi, struct inode *ip, struct file *fp)
check_disk_change(ip->i_bdev);
return 0;
err_release:
if (CDROM_CAN(CDC_LOCK) && cdi->options & CDO_LOCK) {
cdi->ops->lock_door(cdi, 0);
cdinfo(CD_OPEN, "door unlocked.\n");
}
cdi->ops->release(cdi);
err:
cdi->use_count--;

View File

@ -210,6 +210,12 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
#define I915REG_INT_MASK_R 0x020a8
#define I915REG_INT_ENABLE_R 0x020a0
#define I915REG_PIPEASTAT 0x70024
#define I915REG_PIPEBSTAT 0x71024
#define I915_VBLANK_INTERRUPT_ENABLE (1UL<<17)
#define I915_VBLANK_CLEAR (1UL<<1)
#define SRX_INDEX 0x3c4
#define SRX_DATA 0x3c5
#define SR01 1

View File

@ -214,6 +214,10 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
struct drm_device *dev = (struct drm_device *) arg;
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u16 temp;
u32 pipea_stats, pipeb_stats;
pipea_stats = I915_READ(I915REG_PIPEASTAT);
pipeb_stats = I915_READ(I915REG_PIPEBSTAT);
temp = I915_READ16(I915REG_INT_IDENTITY_R);
@ -225,6 +229,8 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
return IRQ_NONE;
I915_WRITE16(I915REG_INT_IDENTITY_R, temp);
(void) I915_READ16(I915REG_INT_IDENTITY_R);
DRM_READMEMORYBARRIER();
dev_priv->sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
@ -252,6 +258,12 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
if (dev_priv->swaps_pending > 0)
drm_locked_tasklet(dev, i915_vblank_tasklet);
I915_WRITE(I915REG_PIPEASTAT,
pipea_stats|I915_VBLANK_INTERRUPT_ENABLE|
I915_VBLANK_CLEAR);
I915_WRITE(I915REG_PIPEBSTAT,
pipeb_stats|I915_VBLANK_INTERRUPT_ENABLE|
I915_VBLANK_CLEAR);
}
return IRQ_HANDLED;

View File

@ -62,6 +62,8 @@
static u32 hpet_nhpet, hpet_max_freq = HPET_USER_FREQ;
/* This clocksource driver currently only works on ia64 */
#ifdef CONFIG_IA64
static void __iomem *hpet_mctr;
static cycle_t read_hpet(void)
@ -79,6 +81,7 @@ static struct clocksource clocksource_hpet = {
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
static struct clocksource *hpet_clocksource;
#endif
/* A lock for concurrent access by app and isr hpet activity. */
static DEFINE_SPINLOCK(hpet_lock);
@ -943,14 +946,14 @@ static acpi_status hpet_resources(struct acpi_resource *res, void *data)
printk(KERN_DEBUG "%s: 0x%lx is busy\n",
__FUNCTION__, hdp->hd_phys_address);
iounmap(hdp->hd_address);
return -EBUSY;
return AE_ALREADY_EXISTS;
}
} else if (res->type == ACPI_RESOURCE_TYPE_FIXED_MEMORY32) {
struct acpi_resource_fixed_memory32 *fixmem32;
fixmem32 = &res->data.fixed_memory32;
if (!fixmem32)
return -EINVAL;
return AE_NO_MEMORY;
hdp->hd_phys_address = fixmem32->address;
hdp->hd_address = ioremap(fixmem32->address,
@ -960,7 +963,7 @@ static acpi_status hpet_resources(struct acpi_resource *res, void *data)
printk(KERN_DEBUG "%s: 0x%lx is busy\n",
__FUNCTION__, hdp->hd_phys_address);
iounmap(hdp->hd_address);
return -EBUSY;
return AE_ALREADY_EXISTS;
}
} else if (res->type == ACPI_RESOURCE_TYPE_EXTENDED_IRQ) {
struct acpi_resource_extended_irq *irqp;

View File

@ -155,23 +155,22 @@ mspec_open(struct vm_area_struct *vma)
* mspec_close
*
* Called when unmapping a device mapping. Frees all mspec pages
* belonging to the vma.
* belonging to all the vma's sharing this vma_data structure.
*/
static void
mspec_close(struct vm_area_struct *vma)
{
struct vma_data *vdata;
int index, last_index, result;
int index, last_index;
unsigned long my_page;
vdata = vma->vm_private_data;
BUG_ON(vma->vm_start < vdata->vm_start || vma->vm_end > vdata->vm_end);
if (!atomic_dec_and_test(&vdata->refcnt))
return;
spin_lock(&vdata->lock);
index = (vma->vm_start - vdata->vm_start) >> PAGE_SHIFT;
last_index = (vma->vm_end - vdata->vm_start) >> PAGE_SHIFT;
for (; index < last_index; index++) {
last_index = (vdata->vm_end - vdata->vm_start) >> PAGE_SHIFT;
for (index = 0; index < last_index; index++) {
if (vdata->maddr[index] == 0)
continue;
/*
@ -180,20 +179,12 @@ mspec_close(struct vm_area_struct *vma)
*/
my_page = vdata->maddr[index];
vdata->maddr[index] = 0;
spin_unlock(&vdata->lock);
result = mspec_zero_block(my_page, PAGE_SIZE);
if (!result)
if (!mspec_zero_block(my_page, PAGE_SIZE))
uncached_free_page(my_page);
else
printk(KERN_WARNING "mspec_close(): "
"failed to zero page %i\n",
result);
spin_lock(&vdata->lock);
"failed to zero page %ld\n", my_page);
}
spin_unlock(&vdata->lock);
if (!atomic_dec_and_test(&vdata->refcnt))
return;
if (vdata->flags & VMD_VMALLOCED)
vfree(vdata);
@ -201,7 +192,6 @@ mspec_close(struct vm_area_struct *vma)
kfree(vdata);
}
/*
* mspec_nopfn
*

View File

@ -1550,11 +1550,13 @@ __u32 secure_tcp_sequence_number(__be32 saddr, __be32 daddr,
* As close as possible to RFC 793, which
* suggests using a 250 kHz clock.
* Further reading shows this assumes 2 Mb/s networks.
* For 10 Gb/s Ethernet, a 1 GHz clock is appropriate.
* That's funny, Linux has one built in! Use it!
* (Networks are faster now - should this be increased?)
* For 10 Mb/s Ethernet, a 1 MHz clock is appropriate.
* For 10 Gb/s Ethernet, a 1 GHz clock should be ok, but
* we also need to limit the resolution so that the u32 seq
* overlaps less than one time per MSL (2 minutes).
* Choosing a clock of 64 ns period is OK. (period of 274 s)
*/
seq += ktime_get_real().tv64;
seq += ktime_get_real().tv64 >> 6;
#if 0
printk("init_seq(%lx, %lx, %d, %d) = %d\n",
saddr, daddr, sport, dport, seq);

View File

@ -770,6 +770,7 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
/*
* Switching-from response
*/
acquire_console_sem();
if (vc->vt_newvt >= 0) {
if (arg == 0)
/*
@ -784,7 +785,6 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
* complete the switch.
*/
int newvt;
acquire_console_sem();
newvt = vc->vt_newvt;
vc->vt_newvt = -1;
i = vc_allocate(newvt);
@ -798,7 +798,6 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
* other console switches..
*/
complete_change_console(vc_cons[newvt].d);
release_console_sem();
}
}
@ -810,9 +809,12 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
/*
* If it's just an ACK, ignore it
*/
if (arg != VT_ACKACQ)
if (arg != VT_ACKACQ) {
release_console_sem();
return -EINVAL;
}
}
release_console_sem();
return 0;
@ -1208,15 +1210,18 @@ void change_console(struct vc_data *new_vc)
/*
* Send the signal as privileged - kill_pid() will
* tell us if the process has gone or something else
* is awry
* is awry.
*
* We need to set vt_newvt *before* sending the signal or we
* have a race.
*/
vc->vt_newvt = new_vc->vc_num;
if (kill_pid(vc->vt_pid, vc->vt_mode.relsig, 1) == 0) {
/*
* It worked. Mark the vt to switch to and
* return. The process needs to send us a
* VT_RELDISP ioctl to complete the switch.
*/
vc->vt_newvt = new_vc->vc_num;
return;
}

View File

@ -1273,7 +1273,7 @@ static void __exit ieee1394_cleanup(void)
unregister_chrdev_region(IEEE1394_CORE_DEV, 256);
}
fs_initcall(ieee1394_init); /* same as ohci1394 */
module_init(ieee1394_init);
module_exit(ieee1394_cleanup);
/* Exported symbols */

View File

@ -3537,7 +3537,5 @@ static int __init ohci1394_init(void)
return pci_register_driver(&ohci1394_pci_driver);
}
/* Register before most other device drivers.
* Useful for remote debugging via physical DMA, e.g. using firescope. */
fs_initcall(ohci1394_init);
module_init(ohci1394_init);
module_exit(ohci1394_cleanup);

View File

@ -1211,12 +1211,42 @@ static void set_datagram_seg(struct mlx4_wqe_datagram_seg *dseg,
dseg->qkey = cpu_to_be32(wr->wr.ud.remote_qkey);
}
static void set_data_seg(struct mlx4_wqe_data_seg *dseg,
struct ib_sge *sg)
static void set_mlx_icrc_seg(void *dseg)
{
u32 *t = dseg;
struct mlx4_wqe_inline_seg *iseg = dseg;
t[1] = 0;
/*
* Need a barrier here before writing the byte_count field to
* make sure that all the data is visible before the
* byte_count field is set. Otherwise, if the segment begins
* a new cacheline, the HCA prefetcher could grab the 64-byte
* chunk and get a valid (!= * 0xffffffff) byte count but
* stale data, and end up sending the wrong data.
*/
wmb();
iseg->byte_count = cpu_to_be32((1 << 31) | 4);
}
static void set_data_seg(struct mlx4_wqe_data_seg *dseg, struct ib_sge *sg)
{
dseg->byte_count = cpu_to_be32(sg->length);
dseg->lkey = cpu_to_be32(sg->lkey);
dseg->addr = cpu_to_be64(sg->addr);
/*
* Need a barrier here before writing the byte_count field to
* make sure that all the data is visible before the
* byte_count field is set. Otherwise, if the segment begins
* a new cacheline, the HCA prefetcher could grab the 64-byte
* chunk and get a valid (!= * 0xffffffff) byte count but
* stale data, and end up sending the wrong data.
*/
wmb();
dseg->byte_count = cpu_to_be32(sg->length);
}
int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
@ -1225,6 +1255,7 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
struct mlx4_ib_qp *qp = to_mqp(ibqp);
void *wqe;
struct mlx4_wqe_ctrl_seg *ctrl;
struct mlx4_wqe_data_seg *dseg;
unsigned long flags;
int nreq;
int err = 0;
@ -1324,22 +1355,27 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
break;
}
for (i = 0; i < wr->num_sge; ++i) {
set_data_seg(wqe, wr->sg_list + i);
/*
* Write data segments in reverse order, so as to
* overwrite cacheline stamp last within each
* cacheline. This avoids issues with WQE
* prefetching.
*/
wqe += sizeof (struct mlx4_wqe_data_seg);
size += sizeof (struct mlx4_wqe_data_seg) / 16;
}
dseg = wqe;
dseg += wr->num_sge - 1;
size += wr->num_sge * (sizeof (struct mlx4_wqe_data_seg) / 16);
/* Add one more inline data segment for ICRC for MLX sends */
if (qp->ibqp.qp_type == IB_QPT_SMI || qp->ibqp.qp_type == IB_QPT_GSI) {
((struct mlx4_wqe_inline_seg *) wqe)->byte_count =
cpu_to_be32((1 << 31) | 4);
((u32 *) wqe)[1] = 0;
wqe += sizeof (struct mlx4_wqe_data_seg);
if (unlikely(qp->ibqp.qp_type == IB_QPT_SMI ||
qp->ibqp.qp_type == IB_QPT_GSI)) {
set_mlx_icrc_seg(dseg + 1);
size += sizeof (struct mlx4_wqe_data_seg) / 16;
}
for (i = wr->num_sge - 1; i >= 0; --i, --dseg)
set_data_seg(dseg, wr->sg_list + i);
ctrl->fence_size = (wr->send_flags & IB_SEND_FENCE ?
MLX4_WQE_CTRL_FENCE : 0) | size;

View File

@ -277,7 +277,7 @@ config JOYSTICK_XPAD_FF
config JOYSTICK_XPAD_LEDS
bool "LED Support for Xbox360 controller 'BigX' LED"
depends on LEDS_CLASS && JOYSTICK_XPAD
depends on JOYSTICK_XPAD && (LEDS_CLASS=y || LEDS_CLASS=JOYSTICK_XPAD)
---help---
This option enables support for the LED which surrounds the Big X on
XBox 360 controller.

View File

@ -328,6 +328,7 @@ static void atp_complete(struct urb* urb)
{
int x, y, x_z, y_z, x_f, y_f;
int retval, i, j;
int key;
struct atp *dev = urb->context;
switch (urb->status) {
@ -468,6 +469,7 @@ static void atp_complete(struct urb* urb)
ATP_XFACT, &x_z, &x_f);
y = atp_calculate_abs(dev->xy_acc + ATP_XSENSORS, ATP_YSENSORS,
ATP_YFACT, &y_z, &y_f);
key = dev->data[dev->datalen - 1] & 1;
if (x && y) {
if (dev->x_old != -1) {
@ -505,7 +507,7 @@ static void atp_complete(struct urb* urb)
the first touch unless reinitialised. Do so if it's been
idle for a while in order to avoid waking the kernel up
several hundred times a second */
if (atp_is_geyser_3(dev)) {
if (!key && atp_is_geyser_3(dev)) {
dev->idlecount++;
if (dev->idlecount == 10) {
dev->valid = 0;
@ -514,7 +516,7 @@ static void atp_complete(struct urb* urb)
}
}
input_report_key(dev->input, BTN_LEFT, dev->data[dev->datalen - 1] & 1);
input_report_key(dev->input, BTN_LEFT, key);
input_sync(dev->input);
exit:

View File

@ -6,7 +6,8 @@ menuconfig VIRTUALIZATION
depends on X86
default y
---help---
Say Y here to get to see options for virtualization guest drivers.
Say Y here to get to see options for using your Linux host to run other
operating systems inside virtual machines (guests).
This option alone does not add any kernel code.
If you say N, all options in this submenu will be skipped and disabled.

View File

@ -22,8 +22,9 @@
jmp lguest_init
/*G:055 We create a macro which puts the assembler code between lgstart_ and
* lgend_ markers. These templates end up in the .init.text section, so they
* are discarded after boot. */
* lgend_ markers. These templates are put in the .text section: they can't be
* discarded after boot as we may need to patch modules, too. */
.text
#define LGUEST_PATCH(name, insns...) \
lgstart_##name: insns; lgend_##name:; \
.globl lgstart_##name; .globl lgend_##name
@ -34,7 +35,6 @@ LGUEST_PATCH(popf, movl %eax, lguest_data+LGUEST_DATA_irq_enabled)
LGUEST_PATCH(pushf, movl lguest_data+LGUEST_DATA_irq_enabled, %eax)
/*:*/
.text
/* These demark the EIP range where host should never deliver interrupts. */
.global lguest_noirq_start
.global lguest_noirq_end

View File

@ -514,7 +514,7 @@ static void ops_complete_biofill(void *stripe_head_ref)
struct stripe_head *sh = stripe_head_ref;
struct bio *return_bi = NULL;
raid5_conf_t *conf = sh->raid_conf;
int i, more_to_read = 0;
int i;
pr_debug("%s: stripe %llu\n", __FUNCTION__,
(unsigned long long)sh->sector);
@ -522,16 +522,14 @@ static void ops_complete_biofill(void *stripe_head_ref)
/* clear completed biofills */
for (i = sh->disks; i--; ) {
struct r5dev *dev = &sh->dev[i];
/* check if this stripe has new incoming reads */
if (dev->toread)
more_to_read++;
/* acknowledge completion of a biofill operation */
/* and check if we need to reply to a read request
*/
if (test_bit(R5_Wantfill, &dev->flags) && !dev->toread) {
/* and check if we need to reply to a read request,
* new R5_Wantfill requests are held off until
* !test_bit(STRIPE_OP_BIOFILL, &sh->ops.pending)
*/
if (test_and_clear_bit(R5_Wantfill, &dev->flags)) {
struct bio *rbi, *rbi2;
clear_bit(R5_Wantfill, &dev->flags);
/* The access to dev->read is outside of the
* spin_lock_irq(&conf->device_lock), but is protected
@ -558,8 +556,7 @@ static void ops_complete_biofill(void *stripe_head_ref)
return_io(return_bi);
if (more_to_read)
set_bit(STRIPE_HANDLE, &sh->state);
set_bit(STRIPE_HANDLE, &sh->state);
release_stripe(sh);
}

View File

@ -754,9 +754,11 @@ static void ivtv_stop_decoding(struct ivtv_open_id *id, int flags, u64 pts)
ivtv_yuv_close(itv);
}
if (s->type == IVTV_DEC_STREAM_TYPE_YUV && itv->output_mode == OUT_YUV)
itv->output_mode = OUT_NONE;
itv->output_mode = OUT_NONE;
else if (s->type == IVTV_DEC_STREAM_TYPE_YUV && itv->output_mode == OUT_UDMA_YUV)
itv->output_mode = OUT_NONE;
else if (s->type == IVTV_DEC_STREAM_TYPE_MPG && itv->output_mode == OUT_MPG)
itv->output_mode = OUT_NONE;
itv->output_mode = OUT_NONE;
itv->speed = 0;
clear_bit(IVTV_F_I_DEC_PAUSED, &itv->i_flags);

View File

@ -1387,7 +1387,6 @@ static const struct file_operations usbvision_fops = {
.ioctl = video_ioctl2,
.llseek = no_llseek,
/* .poll = video_poll, */
.mmap = usbvision_v4l2_mmap,
.compat_ioctl = v4l_compat_ioctl32,
};
static struct video_device usbvision_video_template = {
@ -1413,7 +1412,7 @@ static struct video_device usbvision_video_template = {
.vidioc_s_input = vidioc_s_input,
.vidioc_queryctrl = vidioc_queryctrl,
.vidioc_g_audio = vidioc_g_audio,
.vidioc_g_audio = vidioc_s_audio,
.vidioc_s_audio = vidioc_s_audio,
.vidioc_g_ctrl = vidioc_g_ctrl,
.vidioc_s_ctrl = vidioc_s_ctrl,
.vidioc_streamon = vidioc_streamon,
@ -1459,7 +1458,7 @@ static struct video_device usbvision_radio_template=
.vidioc_s_input = vidioc_s_input,
.vidioc_queryctrl = vidioc_queryctrl,
.vidioc_g_audio = vidioc_g_audio,
.vidioc_g_audio = vidioc_s_audio,
.vidioc_s_audio = vidioc_s_audio,
.vidioc_g_ctrl = vidioc_g_ctrl,
.vidioc_s_ctrl = vidioc_s_ctrl,
.vidioc_g_tuner = vidioc_g_tuner,

View File

@ -54,8 +54,8 @@
#define DRV_MODULE_NAME "bnx2"
#define PFX DRV_MODULE_NAME ": "
#define DRV_MODULE_VERSION "1.6.4"
#define DRV_MODULE_RELDATE "August 3, 2007"
#define DRV_MODULE_VERSION "1.6.5"
#define DRV_MODULE_RELDATE "September 20, 2007"
#define RUN_AT(x) (jiffies + (x))
@ -6727,7 +6727,8 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
} else if (CHIP_NUM(bp) == CHIP_NUM_5706 ||
CHIP_NUM(bp) == CHIP_NUM_5708)
bp->phy_flags |= PHY_CRC_FIX_FLAG;
else if (CHIP_ID(bp) == CHIP_ID_5709_A0)
else if (CHIP_ID(bp) == CHIP_ID_5709_A0 ||
CHIP_ID(bp) == CHIP_ID_5709_A1)
bp->phy_flags |= PHY_DIS_EARLY_DAC_FLAG;
if ((CHIP_ID(bp) == CHIP_ID_5708_A0) ||

View File

@ -1726,6 +1726,7 @@ static int e1000_wol_exclusion(struct e1000_adapter *adapter, struct ethtool_wol
case E1000_DEV_ID_82571EB_QUAD_COPPER:
case E1000_DEV_ID_82571EB_QUAD_FIBER:
case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE:
case E1000_DEV_ID_82571PT_QUAD_COPPER:
case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
/* quad port adapters only support WoL on port A */
if (!adapter->quad_port_a) {

View File

@ -387,6 +387,7 @@ e1000_set_mac_type(struct e1000_hw *hw)
case E1000_DEV_ID_82571EB_SERDES_DUAL:
case E1000_DEV_ID_82571EB_SERDES_QUAD:
case E1000_DEV_ID_82571EB_QUAD_COPPER:
case E1000_DEV_ID_82571PT_QUAD_COPPER:
case E1000_DEV_ID_82571EB_QUAD_FIBER:
case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE:
hw->mac_type = e1000_82571;

View File

@ -475,6 +475,7 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw);
#define E1000_DEV_ID_82571EB_FIBER 0x105F
#define E1000_DEV_ID_82571EB_SERDES 0x1060
#define E1000_DEV_ID_82571EB_QUAD_COPPER 0x10A4
#define E1000_DEV_ID_82571PT_QUAD_COPPER 0x10D5
#define E1000_DEV_ID_82571EB_QUAD_FIBER 0x10A5
#define E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE 0x10BC
#define E1000_DEV_ID_82571EB_SERDES_DUAL 0x10D9

View File

@ -108,6 +108,7 @@ static struct pci_device_id e1000_pci_tbl[] = {
INTEL_E1000_ETHERNET_DEVICE(0x10BC),
INTEL_E1000_ETHERNET_DEVICE(0x10C4),
INTEL_E1000_ETHERNET_DEVICE(0x10C5),
INTEL_E1000_ETHERNET_DEVICE(0x10D5),
INTEL_E1000_ETHERNET_DEVICE(0x10D9),
INTEL_E1000_ETHERNET_DEVICE(0x10DA),
/* required last entry */
@ -1101,6 +1102,7 @@ e1000_probe(struct pci_dev *pdev,
case E1000_DEV_ID_82571EB_QUAD_COPPER:
case E1000_DEV_ID_82571EB_QUAD_FIBER:
case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE:
case E1000_DEV_ID_82571PT_QUAD_COPPER:
/* if quad port adapter, disable WoL on all but port A */
if (global_quad_port_a != 0)
adapter->eeprom_wol = 0;

View File

@ -534,7 +534,7 @@ static irqreturn_t mv643xx_eth_int_handler(int irq, void *dev_id)
}
/* PHY status changed */
if (eth_int_cause_ext & ETH_INT_CAUSE_PHY) {
if (eth_int_cause_ext & (ETH_INT_CAUSE_PHY | ETH_INT_CAUSE_STATE)) {
struct ethtool_cmd cmd;
if (mii_link_ok(&mp->mii)) {
@ -1357,7 +1357,6 @@ static int mv643xx_eth_probe(struct platform_device *pdev)
#endif
dev->watchdog_timeo = 2 * HZ;
dev->tx_queue_len = mp->tx_ring_size;
dev->base_addr = 0;
dev->change_mtu = mv643xx_eth_change_mtu;
dev->do_ioctl = mv643xx_eth_do_ioctl;
@ -2768,8 +2767,6 @@ static const struct ethtool_ops mv643xx_ethtool_ops = {
.get_stats_count = mv643xx_get_stats_count,
.get_ethtool_stats = mv643xx_get_ethtool_stats,
.get_strings = mv643xx_get_strings,
.get_stats_count = mv643xx_get_stats_count,
.get_ethtool_stats = mv643xx_get_ethtool_stats,
.nway_reset = mv643xx_eth_nway_restart,
};

View File

@ -64,7 +64,9 @@
#define ETH_INT_CAUSE_TX_ERROR (ETH_TX_QUEUES_ENABLED << 8)
#define ETH_INT_CAUSE_TX (ETH_INT_CAUSE_TX_DONE | ETH_INT_CAUSE_TX_ERROR)
#define ETH_INT_CAUSE_PHY 0x00010000
#define ETH_INT_UNMASK_ALL_EXT (ETH_INT_CAUSE_TX | ETH_INT_CAUSE_PHY)
#define ETH_INT_CAUSE_STATE 0x00100000
#define ETH_INT_UNMASK_ALL_EXT (ETH_INT_CAUSE_TX | ETH_INT_CAUSE_PHY | \
ETH_INT_CAUSE_STATE)
#define ETH_INT_MASK_ALL 0x00000000
#define ETH_INT_MASK_ALL_EXT 0x00000000

View File

@ -3094,9 +3094,12 @@ static void myri10ge_remove(struct pci_dev *pdev)
}
#define PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E 0x0008
#define PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E_9 0x0009
static struct pci_device_id myri10ge_pci_tbl[] = {
{PCI_DEVICE(PCI_VENDOR_ID_MYRICOM, PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E)},
{PCI_DEVICE
(PCI_VENDOR_ID_MYRICOM, PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E_9)},
{0},
};

View File

@ -116,7 +116,7 @@ struct el3_private {
spinlock_t lock;
};
static const char *if_names[] = { "auto", "10base2", "10baseT", "AUI" };
static const char *if_names[] = { "auto", "10baseT", "10base2", "AUI" };
/*====================================================================*/

View File

@ -409,6 +409,7 @@ int phy_mii_ioctl(struct phy_device *phydev,
return 0;
}
EXPORT_SYMBOL(phy_mii_ioctl);
/**
* phy_start_aneg - start auto-negotiation for this PHY device

View File

@ -136,7 +136,7 @@ struct ppp_mppe_state {
* Key Derivation, from RFC 3078, RFC 3079.
* Equivalent to Get_Key() for MS-CHAP as described in RFC 3079.
*/
static void get_new_key_from_sha(struct ppp_mppe_state * state, unsigned char *InterimKey)
static void get_new_key_from_sha(struct ppp_mppe_state * state)
{
struct hash_desc desc;
struct scatterlist sg[4];
@ -153,8 +153,6 @@ static void get_new_key_from_sha(struct ppp_mppe_state * state, unsigned char *I
desc.flags = 0;
crypto_hash_digest(&desc, sg, nbytes, state->sha1_digest);
memcpy(InterimKey, state->sha1_digest, state->keylen);
}
/*
@ -163,21 +161,21 @@ static void get_new_key_from_sha(struct ppp_mppe_state * state, unsigned char *I
*/
static void mppe_rekey(struct ppp_mppe_state * state, int initial_key)
{
unsigned char InterimKey[MPPE_MAX_KEY_LEN];
struct scatterlist sg_in[1], sg_out[1];
struct blkcipher_desc desc = { .tfm = state->arc4 };
get_new_key_from_sha(state, InterimKey);
get_new_key_from_sha(state);
if (!initial_key) {
crypto_blkcipher_setkey(state->arc4, InterimKey, state->keylen);
setup_sg(sg_in, InterimKey, state->keylen);
crypto_blkcipher_setkey(state->arc4, state->sha1_digest,
state->keylen);
setup_sg(sg_in, state->sha1_digest, state->keylen);
setup_sg(sg_out, state->session_key, state->keylen);
if (crypto_blkcipher_encrypt(&desc, sg_out, sg_in,
state->keylen) != 0) {
printk(KERN_WARNING "mppe_rekey: cipher_encrypt failed\n");
}
} else {
memcpy(state->session_key, InterimKey, state->keylen);
memcpy(state->session_key, state->sha1_digest, state->keylen);
}
if (state->keylen == 8) {
/* See RFC 3078 */

View File

@ -879,8 +879,7 @@ static int __pppoe_xmit(struct sock *sk, struct sk_buff *skb)
dev->hard_header(skb, dev, ETH_P_PPP_SES,
po->pppoe_pa.remote, NULL, data_len);
if (dev_queue_xmit(skb) < 0)
goto abort;
dev_queue_xmit(skb);
return 1;

View File

@ -491,44 +491,46 @@ static int pppol2tp_recv_core(struct sock *sock, struct sk_buff *skb)
u16 hdrflags;
u16 tunnel_id, session_id;
int length;
struct udphdr *uh;
int offset;
tunnel = pppol2tp_sock_to_tunnel(sock);
if (tunnel == NULL)
goto error;
/* UDP always verifies the packet length. */
__skb_pull(skb, sizeof(struct udphdr));
/* Short packet? */
if (skb->len < sizeof(struct udphdr)) {
if (!pskb_may_pull(skb, 12)) {
PRINTK(tunnel->debug, PPPOL2TP_MSG_DATA, KERN_INFO,
"%s: recv short packet (len=%d)\n", tunnel->name, skb->len);
goto error;
}
/* Point to L2TP header */
ptr = skb->data + sizeof(struct udphdr);
ptr = skb->data;
/* Get L2TP header flags */
hdrflags = ntohs(*(__be16*)ptr);
/* Trace packet contents, if enabled */
if (tunnel->debug & PPPOL2TP_MSG_DATA) {
length = min(16u, skb->len);
if (!pskb_may_pull(skb, length))
goto error;
printk(KERN_DEBUG "%s: recv: ", tunnel->name);
for (length = 0; length < 16; length++)
printk(" %02X", ptr[length]);
offset = 0;
do {
printk(" %02X", ptr[offset]);
} while (++offset < length);
printk("\n");
}
/* Get length of L2TP packet */
uh = (struct udphdr *) skb_transport_header(skb);
length = ntohs(uh->len) - sizeof(struct udphdr);
/* Too short? */
if (length < 12) {
PRINTK(tunnel->debug, PPPOL2TP_MSG_DATA, KERN_INFO,
"%s: recv short L2TP packet (len=%d)\n", tunnel->name, length);
goto error;
}
length = skb->len;
/* If type is control packet, it is handled by userspace. */
if (hdrflags & L2TP_HDRFLAG_T) {
@ -606,7 +608,6 @@ static int pppol2tp_recv_core(struct sock *sock, struct sk_buff *skb)
"%s: recv data has no seq numbers when required. "
"Discarding\n", session->name);
session->stats.rx_seq_discards++;
session->stats.rx_errors++;
goto discard;
}
@ -625,7 +626,6 @@ static int pppol2tp_recv_core(struct sock *sock, struct sk_buff *skb)
"%s: recv data has no seq numbers when required. "
"Discarding\n", session->name);
session->stats.rx_seq_discards++;
session->stats.rx_errors++;
goto discard;
}
@ -634,10 +634,14 @@ static int pppol2tp_recv_core(struct sock *sock, struct sk_buff *skb)
}
/* If offset bit set, skip it. */
if (hdrflags & L2TP_HDRFLAG_O)
ptr += 2 + ntohs(*(__be16 *) ptr);
if (hdrflags & L2TP_HDRFLAG_O) {
offset = ntohs(*(__be16 *)ptr);
skb->transport_header += 2 + offset;
if (!pskb_may_pull(skb, skb_transport_offset(skb) + 2))
goto discard;
}
skb_pull(skb, ptr - skb->data);
__skb_pull(skb, skb_transport_offset(skb));
/* Skip PPP header, if present. In testing, Microsoft L2TP clients
* don't send the PPP header (PPP header compression enabled), but
@ -673,7 +677,6 @@ static int pppol2tp_recv_core(struct sock *sock, struct sk_buff *skb)
*/
if (PPPOL2TP_SKB_CB(skb)->ns != session->nr) {
session->stats.rx_seq_discards++;
session->stats.rx_errors++;
PRINTK(session->debug, PPPOL2TP_MSG_SEQ, KERN_DEBUG,
"%s: oos pkt %hu len %d discarded, "
"waiting for %hu, reorder_q_len=%d\n",
@ -698,6 +701,7 @@ static int pppol2tp_recv_core(struct sock *sock, struct sk_buff *skb)
return 0;
discard:
session->stats.rx_errors++;
kfree_skb(skb);
sock_put(session->sock);
@ -958,7 +962,6 @@ static int pppol2tp_xmit(struct ppp_channel *chan, struct sk_buff *skb)
int data_len = skb->len;
struct inet_sock *inet;
__wsum csum = 0;
struct sk_buff *skb2 = NULL;
struct udphdr *uh;
unsigned int len;
@ -989,41 +992,30 @@ static int pppol2tp_xmit(struct ppp_channel *chan, struct sk_buff *skb)
*/
headroom = NET_SKB_PAD + sizeof(struct iphdr) +
sizeof(struct udphdr) + hdr_len + sizeof(ppph);
if (skb_headroom(skb) < headroom) {
skb2 = skb_realloc_headroom(skb, headroom);
if (skb2 == NULL)
goto abort;
} else
skb2 = skb;
/* Check that the socket has room */
if (atomic_read(&sk_tun->sk_wmem_alloc) < sk_tun->sk_sndbuf)
skb_set_owner_w(skb2, sk_tun);
else
goto discard;
if (skb_cow_head(skb, headroom))
goto abort;
/* Setup PPP header */
skb_push(skb2, sizeof(ppph));
skb2->data[0] = ppph[0];
skb2->data[1] = ppph[1];
__skb_push(skb, sizeof(ppph));
skb->data[0] = ppph[0];
skb->data[1] = ppph[1];
/* Setup L2TP header */
skb_push(skb2, hdr_len);
pppol2tp_build_l2tp_header(session, skb2->data);
pppol2tp_build_l2tp_header(session, __skb_push(skb, hdr_len));
/* Setup UDP header */
inet = inet_sk(sk_tun);
skb_push(skb2, sizeof(struct udphdr));
skb_reset_transport_header(skb2);
uh = (struct udphdr *) skb2->data;
__skb_push(skb, sizeof(*uh));
skb_reset_transport_header(skb);
uh = udp_hdr(skb);
uh->source = inet->sport;
uh->dest = inet->dport;
uh->len = htons(sizeof(struct udphdr) + hdr_len + sizeof(ppph) + data_len);
uh->check = 0;
/* Calculate UDP checksum if configured to do so */
/* *BROKEN* Calculate UDP checksum if configured to do so */
if (sk_tun->sk_no_check != UDP_CSUM_NOXMIT)
csum = udp_csum_outgoing(sk_tun, skb2);
csum = udp_csum_outgoing(sk_tun, skb);
/* Debug */
if (session->send_seq)
@ -1036,7 +1028,7 @@ static int pppol2tp_xmit(struct ppp_channel *chan, struct sk_buff *skb)
if (session->debug & PPPOL2TP_MSG_DATA) {
int i;
unsigned char *datap = skb2->data;
unsigned char *datap = skb->data;
printk(KERN_DEBUG "%s: xmit:", session->name);
for (i = 0; i < data_len; i++) {
@ -1049,18 +1041,18 @@ static int pppol2tp_xmit(struct ppp_channel *chan, struct sk_buff *skb)
printk("\n");
}
memset(&(IPCB(skb2)->opt), 0, sizeof(IPCB(skb2)->opt));
IPCB(skb2)->flags &= ~(IPSKB_XFRM_TUNNEL_SIZE | IPSKB_XFRM_TRANSFORMED |
IPSKB_REROUTED);
nf_reset(skb2);
memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt));
IPCB(skb)->flags &= ~(IPSKB_XFRM_TUNNEL_SIZE | IPSKB_XFRM_TRANSFORMED |
IPSKB_REROUTED);
nf_reset(skb);
/* Get routing info from the tunnel socket */
dst_release(skb2->dst);
skb2->dst = sk_dst_get(sk_tun);
dst_release(skb->dst);
skb->dst = sk_dst_get(sk_tun);
/* Queue the packet to IP for output */
len = skb2->len;
rc = ip_queue_xmit(skb2, 1);
len = skb->len;
rc = ip_queue_xmit(skb, 1);
/* Update stats */
if (rc >= 0) {
@ -1073,17 +1065,12 @@ static int pppol2tp_xmit(struct ppp_channel *chan, struct sk_buff *skb)
session->stats.tx_errors++;
}
/* Free the original skb */
kfree_skb(skb);
return 1;
discard:
/* Free the new skb. Caller will free original skb. */
if (skb2 != skb)
kfree_skb(skb2);
abort:
return 0;
/* Free the original skb */
kfree_skb(skb);
return 1;
}
/*****************************************************************************
@ -1326,12 +1313,14 @@ static struct sock *pppol2tp_prepare_tunnel_socket(int fd, u16 tunnel_id,
goto err;
}
sk = sock->sk;
/* Quick sanity checks */
err = -ESOCKTNOSUPPORT;
if (sock->type != SOCK_DGRAM) {
err = -EPROTONOSUPPORT;
if (sk->sk_protocol != IPPROTO_UDP) {
PRINTK(-1, PPPOL2TP_MSG_CONTROL, KERN_ERR,
"tunl %hu: fd %d wrong type, got %d, expected %d\n",
tunnel_id, fd, sock->type, SOCK_DGRAM);
"tunl %hu: fd %d wrong protocol, got %d, expected %d\n",
tunnel_id, fd, sk->sk_protocol, IPPROTO_UDP);
goto err;
}
err = -EAFNOSUPPORT;
@ -1343,7 +1332,6 @@ static struct sock *pppol2tp_prepare_tunnel_socket(int fd, u16 tunnel_id,
}
err = -ENOTCONN;
sk = sock->sk;
/* Check if this socket has already been prepped */
tunnel = (struct pppol2tp_tunnel *)sk->sk_user_data;

View File

@ -2248,6 +2248,13 @@ static int ql_tx_rx_clean(struct ql3_adapter *qdev,
qdev->rsp_consumer_index) && (work_done < work_to_do)) {
net_rsp = qdev->rsp_current;
rmb();
/*
* Fix 4032 chipe undocumented "feature" where bit-8 is set if the
* inbound completion is for a VLAN.
*/
if (qdev->device_id == QL3032_DEVICE_ID)
net_rsp->opcode &= 0x7f;
switch (net_rsp->opcode) {
case OPCODE_OB_MAC_IOCB_FN0:

View File

@ -1228,7 +1228,10 @@ static void rtl8169_hw_phy_config(struct net_device *dev)
return;
}
/* phy config for RTL8169s mac_version C chip */
if ((tp->mac_version != RTL_GIGA_MAC_VER_02) &&
(tp->mac_version != RTL_GIGA_MAC_VER_03))
return;
mdio_write(ioaddr, 31, 0x0001); //w 31 2 0 1
mdio_write(ioaddr, 21, 0x1000); //w 21 15 0 1000
mdio_write(ioaddr, 24, 0x65c7); //w 24 15 0 65c7
@ -2567,6 +2570,15 @@ static void rtl8169_tx_interrupt(struct net_device *dev,
(TX_BUFFS_AVAIL(tp) >= MAX_SKB_FRAGS)) {
netif_wake_queue(dev);
}
/*
* 8168 hack: TxPoll requests are lost when the Tx packets are
* too close. Let's kick an extra TxPoll request when a burst
* of start_xmit activity is detected (if it is not detected,
* it is slow enough). -- FR
*/
smp_rmb();
if (tp->cur_tx != dirty_tx)
RTL_W8(TxPoll, NPQ);
}
}

View File

@ -51,7 +51,7 @@
#include "sky2.h"
#define DRV_NAME "sky2"
#define DRV_VERSION "1.17"
#define DRV_VERSION "1.18"
#define PFX DRV_NAME " "
/*
@ -118,12 +118,15 @@ static const struct pci_device_id sky2_id_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4351) }, /* 88E8036 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4352) }, /* 88E8038 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4353) }, /* 88E8039 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4354) }, /* 88E8040 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4356) }, /* 88EC033 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x435A) }, /* 88E8048 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4360) }, /* 88E8052 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) }, /* 88E8050 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4362) }, /* 88E8053 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4363) }, /* 88E8055 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4364) }, /* 88E8056 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4365) }, /* 88E8070 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4366) }, /* 88EC036 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4367) }, /* 88EC032 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4368) }, /* 88EC034 */
@ -147,6 +150,7 @@ static const char *yukon2_name[] = {
"Extreme", /* 0xb5 */
"EC", /* 0xb6 */
"FE", /* 0xb7 */
"FE+", /* 0xb8 */
};
static void sky2_set_multicast(struct net_device *dev);
@ -217,8 +221,7 @@ static void sky2_power_on(struct sky2_hw *hw)
else
sky2_write8(hw, B2_Y2_CLK_GATE, 0);
if (hw->chip_id == CHIP_ID_YUKON_EC_U ||
hw->chip_id == CHIP_ID_YUKON_EX) {
if (hw->flags & SKY2_HW_ADV_POWER_CTL) {
u32 reg;
sky2_pci_write32(hw, PCI_DEV_REG3, 0);
@ -311,10 +314,8 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
u16 ctrl, ct1000, adv, pg, ledctrl, ledover, reg;
if (sky2->autoneg == AUTONEG_ENABLE
&& !(hw->chip_id == CHIP_ID_YUKON_XL
|| hw->chip_id == CHIP_ID_YUKON_EC_U
|| hw->chip_id == CHIP_ID_YUKON_EX)) {
if (sky2->autoneg == AUTONEG_ENABLE &&
!(hw->flags & SKY2_HW_NEWER_PHY)) {
u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL);
ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK |
@ -334,9 +335,19 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
if (sky2_is_copper(hw)) {
if (hw->chip_id == CHIP_ID_YUKON_FE) {
if (!(hw->flags & SKY2_HW_GIGABIT)) {
/* enable automatic crossover */
ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO) >> 1;
if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
hw->chip_rev == CHIP_REV_YU_FE2_A0) {
u16 spec;
/* Enable Class A driver for FE+ A0 */
spec = gm_phy_read(hw, port, PHY_MARV_FE_SPEC_2);
spec |= PHY_M_FESC_SEL_CL_A;
gm_phy_write(hw, port, PHY_MARV_FE_SPEC_2, spec);
}
} else {
/* disable energy detect */
ctrl &= ~PHY_M_PC_EN_DET_MSK;
@ -346,9 +357,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
/* downshift on PHY 88E1112 and 88E1149 is changed */
if (sky2->autoneg == AUTONEG_ENABLE
&& (hw->chip_id == CHIP_ID_YUKON_XL
|| hw->chip_id == CHIP_ID_YUKON_EC_U
|| hw->chip_id == CHIP_ID_YUKON_EX)) {
&& (hw->flags & SKY2_HW_NEWER_PHY)) {
/* set downshift counter to 3x and enable downshift */
ctrl &= ~PHY_M_PC_DSC_MSK;
ctrl |= PHY_M_PC_DSC(2) | PHY_M_PC_DOWN_S_ENA;
@ -364,7 +373,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
/* special setup for PHY 88E1112 Fiber */
if (hw->chip_id == CHIP_ID_YUKON_XL && !sky2_is_copper(hw)) {
if (hw->chip_id == CHIP_ID_YUKON_XL && (hw->flags & SKY2_HW_FIBRE_PHY)) {
pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
/* Fiber: select 1000BASE-X only mode MAC Specific Ctrl Reg. */
@ -455,7 +464,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
gma_write16(hw, port, GM_GP_CTRL, reg);
if (hw->chip_id != CHIP_ID_YUKON_FE)
if (hw->flags & SKY2_HW_GIGABIT)
gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, ct1000);
gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, adv);
@ -479,6 +488,23 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, ctrl);
break;
case CHIP_ID_YUKON_FE_P:
/* Enable Link Partner Next Page */
ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
ctrl |= PHY_M_PC_ENA_LIP_NP;
/* disable Energy Detect and enable scrambler */
ctrl &= ~(PHY_M_PC_ENA_ENE_DT | PHY_M_PC_DIS_SCRAMB);
gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
/* set LED2 -> ACT, LED1 -> LINK, LED0 -> SPEED */
ctrl = PHY_M_FELP_LED2_CTRL(LED_PAR_CTRL_ACT_BL) |
PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_LINK) |
PHY_M_FELP_LED0_CTRL(LED_PAR_CTRL_SPEED);
gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, ctrl);
break;
case CHIP_ID_YUKON_XL:
pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
@ -548,7 +574,13 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
/* set page register to 0 */
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
} else if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
hw->chip_rev == CHIP_REV_YU_FE2_A0) {
/* apply workaround for integrated resistors calibration */
gm_phy_write(hw, port, PHY_MARV_PAGE_ADDR, 17);
gm_phy_write(hw, port, PHY_MARV_PAGE_DATA, 0x3f60);
} else if (hw->chip_id != CHIP_ID_YUKON_EX) {
/* no effect on Yukon-XL */
gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) {
@ -669,25 +701,25 @@ static void sky2_wol_init(struct sky2_port *sky2)
static void sky2_set_tx_stfwd(struct sky2_hw *hw, unsigned port)
{
if (hw->chip_id == CHIP_ID_YUKON_EX && hw->chip_rev != CHIP_REV_YU_EX_A0) {
struct net_device *dev = hw->dev[port];
if (dev->mtu <= ETH_DATA_LEN)
sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
TX_STFW_ENA |
(hw->dev[port]->mtu > ETH_DATA_LEN) ? TX_JUMBO_ENA : TX_JUMBO_DIS);
} else {
if (hw->dev[port]->mtu > ETH_DATA_LEN) {
/* set Tx GMAC FIFO Almost Empty Threshold */
sky2_write32(hw, SK_REG(port, TX_GMF_AE_THR),
(ECU_JUMBO_WM << 16) | ECU_AE_THR);
TX_JUMBO_DIS | TX_STFW_ENA);
sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
TX_JUMBO_ENA | TX_STFW_DIS);
else if (hw->chip_id != CHIP_ID_YUKON_EC_U)
sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
TX_STFW_ENA | TX_JUMBO_ENA);
else {
/* set Tx GMAC FIFO Almost Empty Threshold */
sky2_write32(hw, SK_REG(port, TX_GMF_AE_THR),
(ECU_JUMBO_WM << 16) | ECU_AE_THR);
/* Can't do offload because of lack of store/forward */
hw->dev[port]->features &= ~(NETIF_F_TSO | NETIF_F_SG
| NETIF_F_ALL_CSUM);
} else
sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
TX_JUMBO_DIS | TX_STFW_ENA);
sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
TX_JUMBO_ENA | TX_STFW_DIS);
/* Can't do offload because of lack of store/forward */
dev->features &= ~(NETIF_F_TSO | NETIF_F_SG | NETIF_F_ALL_CSUM);
}
}
@ -773,7 +805,8 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
/* Configure Rx MAC FIFO */
sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR);
rx_reg = GMF_OPER_ON | GMF_RX_F_FL_ON;
if (hw->chip_id == CHIP_ID_YUKON_EX)
if (hw->chip_id == CHIP_ID_YUKON_EX ||
hw->chip_id == CHIP_ID_YUKON_FE_P)
rx_reg |= GMF_RX_OVER_ON;
sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), rx_reg);
@ -782,13 +815,19 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR);
/* Set threshold to 0xa (64 bytes) + 1 to workaround pause bug */
sky2_write16(hw, SK_REG(port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF+1);
reg = RX_GMF_FL_THR_DEF + 1;
/* Another magic mystery workaround from sk98lin */
if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
hw->chip_rev == CHIP_REV_YU_FE2_A0)
reg = 0x178;
sky2_write16(hw, SK_REG(port, RX_GMF_FL_THR), reg);
/* Configure Tx MAC FIFO */
sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR);
sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON);
if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX) {
/* On chips without ram buffer, pause is controled by MAC level */
if (sky2_read8(hw, B2_E_0) == 0) {
sky2_write8(hw, SK_REG(port, RX_GMF_LP_THR), 768/8);
sky2_write8(hw, SK_REG(port, RX_GMF_UP_THR), 1024/8);
@ -871,6 +910,20 @@ static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2)
return le;
}
static void tx_init(struct sky2_port *sky2)
{
struct sky2_tx_le *le;
sky2->tx_prod = sky2->tx_cons = 0;
sky2->tx_tcpsum = 0;
sky2->tx_last_mss = 0;
le = get_tx_le(sky2);
le->addr = 0;
le->opcode = OP_ADDR64 | HW_OWNER;
sky2->tx_addr64 = 0;
}
static inline struct tx_ring_info *tx_le_re(struct sky2_port *sky2,
struct sky2_tx_le *le)
{
@ -967,19 +1020,15 @@ static void sky2_rx_unmap_skb(struct pci_dev *pdev, struct rx_ring_info *re)
*/
static void rx_set_checksum(struct sky2_port *sky2)
{
struct sky2_rx_le *le;
struct sky2_rx_le *le = sky2_next_rx(sky2);
if (sky2->hw->chip_id != CHIP_ID_YUKON_EX) {
le = sky2_next_rx(sky2);
le->addr = cpu_to_le32((ETH_HLEN << 16) | ETH_HLEN);
le->ctrl = 0;
le->opcode = OP_TCPSTART | HW_OWNER;
sky2_write32(sky2->hw,
Q_ADDR(rxqaddr[sky2->port], Q_CSR),
sky2->rx_csum ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
}
le->addr = cpu_to_le32((ETH_HLEN << 16) | ETH_HLEN);
le->ctrl = 0;
le->opcode = OP_TCPSTART | HW_OWNER;
sky2_write32(sky2->hw,
Q_ADDR(rxqaddr[sky2->port], Q_CSR),
sky2->rx_csum ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
}
/*
@ -1175,7 +1224,8 @@ static int sky2_rx_start(struct sky2_port *sky2)
sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1);
rx_set_checksum(sky2);
if (!(hw->flags & SKY2_HW_NEW_LE))
rx_set_checksum(sky2);
/* Space needed for frame data + headers rounded up */
size = roundup(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8);
@ -1246,7 +1296,7 @@ static int sky2_up(struct net_device *dev)
struct sky2_port *sky2 = netdev_priv(dev);
struct sky2_hw *hw = sky2->hw;
unsigned port = sky2->port;
u32 ramsize, imask;
u32 imask, ramsize;
int cap, err = -ENOMEM;
struct net_device *otherdev = hw->dev[sky2->port^1];
@ -1284,7 +1334,8 @@ static int sky2_up(struct net_device *dev)
GFP_KERNEL);
if (!sky2->tx_ring)
goto err_out;
sky2->tx_prod = sky2->tx_cons = 0;
tx_init(sky2);
sky2->rx_le = pci_alloc_consistent(hw->pdev, RX_LE_BYTES,
&sky2->rx_le_map);
@ -1303,11 +1354,10 @@ static int sky2_up(struct net_device *dev)
/* Register is number of 4K blocks on internal RAM buffer. */
ramsize = sky2_read8(hw, B2_E_0) * 4;
printk(KERN_INFO PFX "%s: ram buffer %dK\n", dev->name, ramsize);
if (ramsize > 0) {
u32 rxspace;
pr_debug(PFX "%s: ram buffer %dK\n", dev->name, ramsize);
if (ramsize < 16)
rxspace = ramsize / 2;
else
@ -1436,13 +1486,15 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
/* Check for TCP Segmentation Offload */
mss = skb_shinfo(skb)->gso_size;
if (mss != 0) {
if (hw->chip_id != CHIP_ID_YUKON_EX)
if (!(hw->flags & SKY2_HW_NEW_LE))
mss += ETH_HLEN + ip_hdrlen(skb) + tcp_hdrlen(skb);
if (mss != sky2->tx_last_mss) {
le = get_tx_le(sky2);
le->addr = cpu_to_le32(mss);
if (hw->chip_id == CHIP_ID_YUKON_EX)
if (hw->flags & SKY2_HW_NEW_LE)
le->opcode = OP_MSS | HW_OWNER;
else
le->opcode = OP_LRGLEN | HW_OWNER;
@ -1468,8 +1520,7 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
/* Handle TCP checksum offload */
if (skb->ip_summed == CHECKSUM_PARTIAL) {
/* On Yukon EX (some versions) encoding change. */
if (hw->chip_id == CHIP_ID_YUKON_EX
&& hw->chip_rev != CHIP_REV_YU_EX_B0)
if (hw->flags & SKY2_HW_AUTO_TX_SUM)
ctrl |= CALSUM; /* auto checksum */
else {
const unsigned offset = skb_transport_offset(skb);
@ -1622,9 +1673,6 @@ static int sky2_down(struct net_device *dev)
if (netif_msg_ifdown(sky2))
printk(KERN_INFO PFX "%s: disabling interface\n", dev->name);
if (netif_carrier_ok(dev) && --hw->active == 0)
del_timer(&hw->watchdog_timer);
/* Stop more packets from being queued */
netif_stop_queue(dev);
@ -1708,11 +1756,15 @@ static int sky2_down(struct net_device *dev)
static u16 sky2_phy_speed(const struct sky2_hw *hw, u16 aux)
{
if (!sky2_is_copper(hw))
if (hw->flags & SKY2_HW_FIBRE_PHY)
return SPEED_1000;
if (hw->chip_id == CHIP_ID_YUKON_FE)
return (aux & PHY_M_PS_SPEED_100) ? SPEED_100 : SPEED_10;
if (!(hw->flags & SKY2_HW_GIGABIT)) {
if (aux & PHY_M_PS_SPEED_100)
return SPEED_100;
else
return SPEED_10;
}
switch (aux & PHY_M_PS_SPEED_MSK) {
case PHY_M_PS_SPEED_1000:
@ -1745,17 +1797,13 @@ static void sky2_link_up(struct sky2_port *sky2)
netif_carrier_on(sky2->netdev);
if (hw->active++ == 0)
mod_timer(&hw->watchdog_timer, jiffies + 1);
mod_timer(&hw->watchdog_timer, jiffies + 1);
/* Turn on link LED */
sky2_write8(hw, SK_REG(port, LNK_LED_REG),
LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF);
if (hw->chip_id == CHIP_ID_YUKON_XL
|| hw->chip_id == CHIP_ID_YUKON_EC_U
|| hw->chip_id == CHIP_ID_YUKON_EX) {
if (hw->flags & SKY2_HW_NEWER_PHY) {
u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
u16 led = PHY_M_LEDC_LOS_CTRL(1); /* link active */
@ -1800,11 +1848,6 @@ static void sky2_link_down(struct sky2_port *sky2)
netif_carrier_off(sky2->netdev);
/* Stop watchdog if both ports are not active */
if (--hw->active == 0)
del_timer(&hw->watchdog_timer);
/* Turn on link LED */
sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF);
@ -1847,7 +1890,7 @@ static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux)
/* Since the pause result bits seem to in different positions on
* different chips. look at registers.
*/
if (!sky2_is_copper(hw)) {
if (hw->flags & SKY2_HW_FIBRE_PHY) {
/* Shift for bits in fiber PHY */
advert &= ~(ADVERTISE_PAUSE_CAP|ADVERTISE_PAUSE_ASYM);
lpa &= ~(LPA_PAUSE_CAP|LPA_PAUSE_ASYM);
@ -1958,7 +2001,9 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu)
if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU)
return -EINVAL;
if (new_mtu > ETH_DATA_LEN && hw->chip_id == CHIP_ID_YUKON_FE)
if (new_mtu > ETH_DATA_LEN &&
(hw->chip_id == CHIP_ID_YUKON_FE ||
hw->chip_id == CHIP_ID_YUKON_FE_P))
return -EINVAL;
if (!netif_running(dev)) {
@ -1975,7 +2020,7 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu)
synchronize_irq(hw->pdev->irq);
if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX)
if (sky2_read8(hw, B2_E_0) == 0)
sky2_set_tx_stfwd(hw, port);
ctl = gma_read16(hw, port, GM_GP_CTRL);
@ -2103,6 +2148,13 @@ static struct sk_buff *sky2_receive(struct net_device *dev,
struct sky2_port *sky2 = netdev_priv(dev);
struct rx_ring_info *re = sky2->rx_ring + sky2->rx_next;
struct sk_buff *skb = NULL;
u16 count = (status & GMR_FS_LEN) >> 16;
#ifdef SKY2_VLAN_TAG_USED
/* Account for vlan tag */
if (sky2->vlgrp && (status & GMR_FS_VLAN))
count -= VLAN_HLEN;
#endif
if (unlikely(netif_msg_rx_status(sky2)))
printk(KERN_DEBUG PFX "%s: rx slot %u status 0x%x len %d\n",
@ -2111,15 +2163,29 @@ static struct sk_buff *sky2_receive(struct net_device *dev,
sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending;
prefetch(sky2->rx_ring + sky2->rx_next);
if (length < ETH_ZLEN || length > sky2->rx_data_size)
goto len_error;
/* This chip has hardware problems that generates bogus status.
* So do only marginal checking and expect higher level protocols
* to handle crap frames.
*/
if (sky2->hw->chip_id == CHIP_ID_YUKON_FE_P &&
sky2->hw->chip_rev == CHIP_REV_YU_FE2_A0 &&
length != count)
goto okay;
if (status & GMR_FS_ANY_ERR)
goto error;
if (!(status & GMR_FS_RX_OK))
goto resubmit;
if (status >> 16 != length)
goto len_mismatch;
/* if length reported by DMA does not match PHY, packet was truncated */
if (length != count)
goto len_error;
okay:
if (length < copybreak)
skb = receive_copy(sky2, re, length);
else
@ -2129,10 +2195,14 @@ resubmit:
return skb;
len_mismatch:
len_error:
/* Truncation of overlength packets
causes PHY length to not match MAC length */
++sky2->net_stats.rx_length_errors;
if (netif_msg_rx_err(sky2) && net_ratelimit())
pr_info(PFX "%s: rx length error: status %#x length %d\n",
dev->name, status, length);
goto resubmit;
error:
++sky2->net_stats.rx_errors;
@ -2202,7 +2272,7 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do)
}
/* This chip reports checksum status differently */
if (hw->chip_id == CHIP_ID_YUKON_EX) {
if (hw->flags & SKY2_HW_NEW_LE) {
if (sky2->rx_csum &&
(le->css & (CSS_ISIPV4 | CSS_ISIPV6)) &&
(le->css & CSS_TCPUDPCSOK))
@ -2243,8 +2313,14 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do)
if (!sky2->rx_csum)
break;
if (hw->chip_id == CHIP_ID_YUKON_EX)
/* If this happens then driver assuming wrong format */
if (unlikely(hw->flags & SKY2_HW_NEW_LE)) {
if (net_ratelimit())
printk(KERN_NOTICE "%s: unexpected"
" checksum status\n",
dev->name);
break;
}
/* Both checksum counters are programmed to start at
* the same offset, so unless there is a problem they
@ -2436,20 +2512,72 @@ static void sky2_le_error(struct sky2_hw *hw, unsigned port,
sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_IRQ_CHK);
}
/* Check for lost IRQ once a second */
static int sky2_rx_hung(struct net_device *dev)
{
struct sky2_port *sky2 = netdev_priv(dev);
struct sky2_hw *hw = sky2->hw;
unsigned port = sky2->port;
unsigned rxq = rxqaddr[port];
u32 mac_rp = sky2_read32(hw, SK_REG(port, RX_GMF_RP));
u8 mac_lev = sky2_read8(hw, SK_REG(port, RX_GMF_RLEV));
u8 fifo_rp = sky2_read8(hw, Q_ADDR(rxq, Q_RP));
u8 fifo_lev = sky2_read8(hw, Q_ADDR(rxq, Q_RL));
/* If idle and MAC or PCI is stuck */
if (sky2->check.last == dev->last_rx &&
((mac_rp == sky2->check.mac_rp &&
mac_lev != 0 && mac_lev >= sky2->check.mac_lev) ||
/* Check if the PCI RX hang */
(fifo_rp == sky2->check.fifo_rp &&
fifo_lev != 0 && fifo_lev >= sky2->check.fifo_lev))) {
printk(KERN_DEBUG PFX "%s: hung mac %d:%d fifo %d (%d:%d)\n",
dev->name, mac_lev, mac_rp, fifo_lev, fifo_rp,
sky2_read8(hw, Q_ADDR(rxq, Q_WP)));
return 1;
} else {
sky2->check.last = dev->last_rx;
sky2->check.mac_rp = mac_rp;
sky2->check.mac_lev = mac_lev;
sky2->check.fifo_rp = fifo_rp;
sky2->check.fifo_lev = fifo_lev;
return 0;
}
}
static void sky2_watchdog(unsigned long arg)
{
struct sky2_hw *hw = (struct sky2_hw *) arg;
struct net_device *dev;
/* Check for lost IRQ once a second */
if (sky2_read32(hw, B0_ISRC)) {
struct net_device *dev = hw->dev[0];
dev = hw->dev[0];
if (__netif_rx_schedule_prep(dev))
__netif_rx_schedule(dev);
} else {
int i, active = 0;
for (i = 0; i < hw->ports; i++) {
dev = hw->dev[i];
if (!netif_running(dev))
continue;
++active;
/* For chips with Rx FIFO, check if stuck */
if ((hw->flags & SKY2_HW_FIFO_HANG_CHECK) &&
sky2_rx_hung(dev)) {
pr_info(PFX "%s: receiver hang detected\n",
dev->name);
schedule_work(&hw->restart_work);
return;
}
}
if (active == 0)
return;
}
if (hw->active > 0)
mod_timer(&hw->watchdog_timer, round_jiffies(jiffies + HZ));
mod_timer(&hw->watchdog_timer, round_jiffies(jiffies + HZ));
}
/* Hardware/software error handling */
@ -2546,17 +2674,25 @@ static void sky2_netpoll(struct net_device *dev)
#endif
/* Chip internal frequency for clock calculations */
static inline u32 sky2_mhz(const struct sky2_hw *hw)
static u32 sky2_mhz(const struct sky2_hw *hw)
{
switch (hw->chip_id) {
case CHIP_ID_YUKON_EC:
case CHIP_ID_YUKON_EC_U:
case CHIP_ID_YUKON_EX:
return 125; /* 125 Mhz */
return 125;
case CHIP_ID_YUKON_FE:
return 100; /* 100 Mhz */
default: /* YUKON_XL */
return 156; /* 156 Mhz */
return 100;
case CHIP_ID_YUKON_FE_P:
return 50;
case CHIP_ID_YUKON_XL:
return 156;
default:
BUG();
}
}
@ -2581,23 +2717,63 @@ static int __devinit sky2_init(struct sky2_hw *hw)
sky2_write8(hw, B0_CTST, CS_RST_CLR);
hw->chip_id = sky2_read8(hw, B2_CHIP_ID);
if (hw->chip_id < CHIP_ID_YUKON_XL || hw->chip_id > CHIP_ID_YUKON_FE) {
hw->chip_rev = (sky2_read8(hw, B2_MAC_CFG) & CFG_CHIP_R_MSK) >> 4;
switch(hw->chip_id) {
case CHIP_ID_YUKON_XL:
hw->flags = SKY2_HW_GIGABIT
| SKY2_HW_NEWER_PHY;
if (hw->chip_rev < 3)
hw->flags |= SKY2_HW_FIFO_HANG_CHECK;
break;
case CHIP_ID_YUKON_EC_U:
hw->flags = SKY2_HW_GIGABIT
| SKY2_HW_NEWER_PHY
| SKY2_HW_ADV_POWER_CTL;
break;
case CHIP_ID_YUKON_EX:
hw->flags = SKY2_HW_GIGABIT
| SKY2_HW_NEWER_PHY
| SKY2_HW_NEW_LE
| SKY2_HW_ADV_POWER_CTL;
/* New transmit checksum */
if (hw->chip_rev != CHIP_REV_YU_EX_B0)
hw->flags |= SKY2_HW_AUTO_TX_SUM;
break;
case CHIP_ID_YUKON_EC:
/* This rev is really old, and requires untested workarounds */
if (hw->chip_rev == CHIP_REV_YU_EC_A1) {
dev_err(&hw->pdev->dev, "unsupported revision Yukon-EC rev A1\n");
return -EOPNOTSUPP;
}
hw->flags = SKY2_HW_GIGABIT | SKY2_HW_FIFO_HANG_CHECK;
break;
case CHIP_ID_YUKON_FE:
break;
case CHIP_ID_YUKON_FE_P:
hw->flags = SKY2_HW_NEWER_PHY
| SKY2_HW_NEW_LE
| SKY2_HW_AUTO_TX_SUM
| SKY2_HW_ADV_POWER_CTL;
break;
default:
dev_err(&hw->pdev->dev, "unsupported chip type 0x%x\n",
hw->chip_id);
return -EOPNOTSUPP;
}
hw->chip_rev = (sky2_read8(hw, B2_MAC_CFG) & CFG_CHIP_R_MSK) >> 4;
/* This rev is really old, and requires untested workarounds */
if (hw->chip_id == CHIP_ID_YUKON_EC && hw->chip_rev == CHIP_REV_YU_EC_A1) {
dev_err(&hw->pdev->dev, "unsupported revision Yukon-%s (0x%x) rev %d\n",
yukon2_name[hw->chip_id - CHIP_ID_YUKON_XL],
hw->chip_id, hw->chip_rev);
return -EOPNOTSUPP;
}
hw->pmd_type = sky2_read8(hw, B2_PMD_TYP);
if (hw->pmd_type == 'L' || hw->pmd_type == 'S' || hw->pmd_type == 'P')
hw->flags |= SKY2_HW_FIBRE_PHY;
hw->ports = 1;
t8 = sky2_read8(hw, B2_Y2_HW_RES);
if ((t8 & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) {
@ -2791,7 +2967,9 @@ static int sky2_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
sky2->wol = wol->wolopts;
if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX)
if (hw->chip_id == CHIP_ID_YUKON_EC_U ||
hw->chip_id == CHIP_ID_YUKON_EX ||
hw->chip_id == CHIP_ID_YUKON_FE_P)
sky2_write32(hw, B0_CTST, sky2->wol
? Y2_HW_WOL_ON : Y2_HW_WOL_OFF);
@ -2809,7 +2987,7 @@ static u32 sky2_supported_modes(const struct sky2_hw *hw)
| SUPPORTED_100baseT_Full
| SUPPORTED_Autoneg | SUPPORTED_TP;
if (hw->chip_id != CHIP_ID_YUKON_FE)
if (hw->flags & SKY2_HW_GIGABIT)
modes |= SUPPORTED_1000baseT_Half
| SUPPORTED_1000baseT_Full;
return modes;
@ -2829,13 +3007,6 @@ static int sky2_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
ecmd->supported = sky2_supported_modes(hw);
ecmd->phy_address = PHY_ADDR_MARV;
if (sky2_is_copper(hw)) {
ecmd->supported = SUPPORTED_10baseT_Half
| SUPPORTED_10baseT_Full
| SUPPORTED_100baseT_Half
| SUPPORTED_100baseT_Full
| SUPPORTED_1000baseT_Half
| SUPPORTED_1000baseT_Full
| SUPPORTED_Autoneg | SUPPORTED_TP;
ecmd->port = PORT_TP;
ecmd->speed = sky2->speed;
} else {
@ -3814,8 +3985,12 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
dev->features |= NETIF_F_HIGHDMA;
#ifdef SKY2_VLAN_TAG_USED
dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
dev->vlan_rx_register = sky2_vlan_rx_register;
/* The workaround for FE+ status conflicts with VLAN tag detection. */
if (!(sky2->hw->chip_id == CHIP_ID_YUKON_FE_P &&
sky2->hw->chip_rev == CHIP_REV_YU_FE2_A0)) {
dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
dev->vlan_rx_register = sky2_vlan_rx_register;
}
#endif
/* read the mac address */
@ -3846,7 +4021,7 @@ static irqreturn_t __devinit sky2_test_intr(int irq, void *dev_id)
return IRQ_NONE;
if (status & Y2_IS_IRQ_SW) {
hw->msi = 1;
hw->flags |= SKY2_HW_USE_MSI;
wake_up(&hw->msi_wait);
sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
}
@ -3874,9 +4049,9 @@ static int __devinit sky2_test_msi(struct sky2_hw *hw)
sky2_write8(hw, B0_CTST, CS_ST_SW_IRQ);
sky2_read8(hw, B0_CTST);
wait_event_timeout(hw->msi_wait, hw->msi, HZ/10);
wait_event_timeout(hw->msi_wait, (hw->flags & SKY2_HW_USE_MSI), HZ/10);
if (!hw->msi) {
if (!(hw->flags & SKY2_HW_USE_MSI)) {
/* MSI test failed, go back to INTx mode */
dev_info(&pdev->dev, "No interrupt generated using MSI, "
"switching to INTx mode.\n");
@ -4009,7 +4184,8 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
goto err_out_free_netdev;
}
err = request_irq(pdev->irq, sky2_intr, hw->msi ? 0 : IRQF_SHARED,
err = request_irq(pdev->irq, sky2_intr,
(hw->flags & SKY2_HW_USE_MSI) ? 0 : IRQF_SHARED,
dev->name, hw);
if (err) {
dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq);
@ -4042,7 +4218,7 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
return 0;
err_out_unregister:
if (hw->msi)
if (hw->flags & SKY2_HW_USE_MSI)
pci_disable_msi(pdev);
unregister_netdev(dev);
err_out_free_netdev:
@ -4091,7 +4267,7 @@ static void __devexit sky2_remove(struct pci_dev *pdev)
sky2_read8(hw, B0_CTST);
free_irq(pdev->irq, hw);
if (hw->msi)
if (hw->flags & SKY2_HW_USE_MSI)
pci_disable_msi(pdev);
pci_free_consistent(pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma);
pci_release_regions(pdev);
@ -4159,7 +4335,9 @@ static int sky2_resume(struct pci_dev *pdev)
pci_enable_wake(pdev, PCI_D0, 0);
/* Re-enable all clocks */
if (hw->chip_id == CHIP_ID_YUKON_EX || hw->chip_id == CHIP_ID_YUKON_EC_U)
if (hw->chip_id == CHIP_ID_YUKON_EX ||
hw->chip_id == CHIP_ID_YUKON_EC_U ||
hw->chip_id == CHIP_ID_YUKON_FE_P)
sky2_pci_write32(hw, PCI_DEV_REG3, 0);
sky2_reset(hw);

View File

@ -470,18 +470,24 @@ enum {
CHIP_ID_YUKON_EX = 0xb5, /* Chip ID for YUKON-2 Extreme */
CHIP_ID_YUKON_EC = 0xb6, /* Chip ID for YUKON-2 EC */
CHIP_ID_YUKON_FE = 0xb7, /* Chip ID for YUKON-2 FE */
CHIP_ID_YUKON_FE_P = 0xb8, /* Chip ID for YUKON-2 FE+ */
};
enum yukon_ec_rev {
CHIP_REV_YU_EC_A1 = 0, /* Chip Rev. for Yukon-EC A1/A0 */
CHIP_REV_YU_EC_A2 = 1, /* Chip Rev. for Yukon-EC A2 */
CHIP_REV_YU_EC_A3 = 2, /* Chip Rev. for Yukon-EC A3 */
};
enum yukon_ec_u_rev {
CHIP_REV_YU_EC_U_A0 = 1,
CHIP_REV_YU_EC_U_A1 = 2,
CHIP_REV_YU_EC_U_B0 = 3,
};
enum yukon_fe_rev {
CHIP_REV_YU_FE_A1 = 1,
CHIP_REV_YU_FE_A2 = 2,
};
enum yukon_fe_p_rev {
CHIP_REV_YU_FE2_A0 = 0,
};
enum yukon_ex_rev {
CHIP_REV_YU_EX_A0 = 1,
@ -1668,7 +1674,7 @@ enum {
/* Receive Frame Status Encoding */
enum {
GMR_FS_LEN = 0xffff<<16, /* Bit 31..16: Rx Frame Length */
GMR_FS_LEN = 0x7fff<<16, /* Bit 30..16: Rx Frame Length */
GMR_FS_VLAN = 1<<13, /* VLAN Packet */
GMR_FS_JABBER = 1<<12, /* Jabber Packet */
GMR_FS_UN_SIZE = 1<<11, /* Undersize Packet */
@ -1729,6 +1735,10 @@ enum {
GMF_RX_CTRL_DEF = GMF_OPER_ON | GMF_RX_F_FL_ON,
};
/* TX_GMF_EA 32 bit Tx GMAC FIFO End Address */
enum {
TX_DYN_WM_ENA = 3, /* Yukon-FE+ specific */
};
/* TX_GMF_CTRL_T 32 bit Tx GMAC FIFO Control/Test */
enum {
@ -2017,6 +2027,14 @@ struct sky2_port {
u16 rx_tag;
struct vlan_group *vlgrp;
#endif
struct {
unsigned long last;
u32 mac_rp;
u8 mac_lev;
u8 fifo_rp;
u8 fifo_lev;
} check;
dma_addr_t rx_le_map;
dma_addr_t tx_le_map;
@ -2040,12 +2058,20 @@ struct sky2_hw {
void __iomem *regs;
struct pci_dev *pdev;
struct net_device *dev[2];
unsigned long flags;
#define SKY2_HW_USE_MSI 0x00000001
#define SKY2_HW_FIBRE_PHY 0x00000002
#define SKY2_HW_GIGABIT 0x00000004
#define SKY2_HW_NEWER_PHY 0x00000008
#define SKY2_HW_FIFO_HANG_CHECK 0x00000010
#define SKY2_HW_NEW_LE 0x00000020 /* new LSOv2 format */
#define SKY2_HW_AUTO_TX_SUM 0x00000040 /* new IP decode for Tx */
#define SKY2_HW_ADV_POWER_CTL 0x00000080 /* additional PHY power regs */
u8 chip_id;
u8 chip_rev;
u8 pmd_type;
u8 ports;
u8 active;
struct sky2_status_le *st_le;
u32 st_idx;
@ -2053,13 +2079,12 @@ struct sky2_hw {
struct timer_list watchdog_timer;
struct work_struct restart_work;
int msi;
wait_queue_head_t msi_wait;
};
static inline int sky2_is_copper(const struct sky2_hw *hw)
{
return !(hw->pmd_type == 'L' || hw->pmd_type == 'S' || hw->pmd_type == 'P');
return !(hw->flags & SKY2_HW_FIBRE_PHY);
}
/* Register accessor for memory mapped device */

View File

@ -405,7 +405,7 @@ static int dm9601_bind(struct usbnet *dev, struct usb_interface *intf)
dev->net->ethtool_ops = &dm9601_ethtool_ops;
dev->net->hard_header_len += DM_TX_OVERHEAD;
dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
dev->rx_urb_size = dev->net->mtu + DM_RX_OVERHEAD;
dev->rx_urb_size = dev->net->mtu + ETH_HLEN + DM_RX_OVERHEAD;
dev->mii.dev = dev->net;
dev->mii.mdio_read = dm9601_mdio_read;

View File

@ -43,7 +43,7 @@ obj-$(CONFIG_PCMCIA_RAYCS) += ray_cs.o
obj-$(CONFIG_PCMCIA_WL3501) += wl3501_cs.o
obj-$(CONFIG_USB_ZD1201) += zd1201.o
obj-$(CONFIG_LIBERTAS_USB) += libertas/
obj-$(CONFIG_LIBERTAS) += libertas/
rtl8187-objs := rtl8187_dev.o rtl8187_rtl8225.o
obj-$(CONFIG_RTL8187) += rtl8187.o

View File

@ -1444,7 +1444,6 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID, quirk_netmos);
static void __devinit quirk_e100_interrupt(struct pci_dev *dev)
{
u16 command;
u32 bar;
u8 __iomem *csr;
u8 cmd_hi;
@ -1476,12 +1475,12 @@ static void __devinit quirk_e100_interrupt(struct pci_dev *dev)
* re-enable them when it's ready.
*/
pci_read_config_word(dev, PCI_COMMAND, &command);
pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar);
if (!(command & PCI_COMMAND_MEMORY) || !bar)
if (!(command & PCI_COMMAND_MEMORY) || !pci_resource_start(dev, 0))
return;
csr = ioremap(bar, 8);
/* Convert from PCI bus to resource space. */
csr = ioremap(pci_resource_start(dev, 0), 8);
if (!csr) {
printk(KERN_WARNING "PCI: Can't map %s e100 registers\n",
pci_name(dev));

View File

@ -289,6 +289,7 @@ int power_supply_uevent(struct device *dev, char **envp, int num_envp,
if (ret)
goto out;
}
envp[i] = NULL;
out:
free_page((unsigned long)prop_buf);

View File

@ -451,7 +451,7 @@ static int asd_build_smp_ascb(struct asd_ascb *ascb, struct sas_task *task,
struct scb *scb;
pci_map_sg(asd_ha->pcidev, &task->smp_task.smp_req, 1,
PCI_DMA_FROMDEVICE);
PCI_DMA_TODEVICE);
pci_map_sg(asd_ha->pcidev, &task->smp_task.smp_resp, 1,
PCI_DMA_FROMDEVICE);
@ -486,7 +486,7 @@ static void asd_unbuild_smp_ascb(struct asd_ascb *a)
BUG_ON(!task);
pci_unmap_sg(a->ha->pcidev, &task->smp_task.smp_req, 1,
PCI_DMA_FROMDEVICE);
PCI_DMA_TODEVICE);
pci_unmap_sg(a->ha->pcidev, &task->smp_task.smp_resp, 1,
PCI_DMA_FROMDEVICE);
}

View File

@ -2314,6 +2314,7 @@ int __devinit scsi_esp_register(struct esp *esp, struct device *dev)
esp->host->transportt = esp_transport_template;
esp->host->max_lun = ESP_MAX_LUN;
esp->host->cmd_per_lun = 2;
esp->host->unique_id = instance;
esp_set_clock_params(esp);
@ -2337,7 +2338,7 @@ int __devinit scsi_esp_register(struct esp *esp, struct device *dev)
if (err)
return err;
esp->host->unique_id = instance++;
instance++;
scsi_scan_host(esp->host);

View File

@ -787,10 +787,12 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer)
struct scsi_target *starget = sdev->sdev_target;
struct Scsi_Host *shost = sdev->host;
int len = sdev->inquiry_len;
int min_period = spi_min_period(starget);
int max_width = spi_max_width(starget);
/* first set us up for narrow async */
DV_SET(offset, 0);
DV_SET(width, 0);
if (spi_dv_device_compare_inquiry(sdev, buffer, buffer, DV_LOOPS)
!= SPI_COMPARE_SUCCESS) {
starget_printk(KERN_ERR, starget, "Domain Validation Initial Inquiry Failed\n");
@ -798,9 +800,13 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer)
return;
}
if (!scsi_device_wide(sdev)) {
spi_max_width(starget) = 0;
max_width = 0;
}
/* test width */
if (i->f->set_width && spi_max_width(starget) &&
scsi_device_wide(sdev)) {
if (i->f->set_width && max_width) {
i->f->set_width(starget, 1);
if (spi_dv_device_compare_inquiry(sdev, buffer,
@ -809,6 +815,11 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer)
!= SPI_COMPARE_SUCCESS) {
starget_printk(KERN_ERR, starget, "Wide Transfers Fail\n");
i->f->set_width(starget, 0);
/* Make sure we don't force wide back on by asking
* for a transfer period that requires it */
max_width = 0;
if (min_period < 10)
min_period = 10;
}
}
@ -828,7 +839,8 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer)
/* now set up to the maximum */
DV_SET(offset, spi_max_offset(starget));
DV_SET(period, spi_min_period(starget));
DV_SET(period, min_period);
/* try QAS requests; this should be harmless to set if the
* target supports it */
if (scsi_device_qas(sdev)) {
@ -837,14 +849,14 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer)
DV_SET(qas, 0);
}
if (scsi_device_ius(sdev) && spi_min_period(starget) < 9) {
if (scsi_device_ius(sdev) && min_period < 9) {
/* This u320 (or u640). Set IU transfers */
DV_SET(iu, 1);
/* Then set the optional parameters */
DV_SET(rd_strm, 1);
DV_SET(wr_flow, 1);
DV_SET(rti, 1);
if (spi_min_period(starget) == 8)
if (min_period == 8)
DV_SET(pcomp_en, 1);
} else {
DV_SET(iu, 0);
@ -862,6 +874,10 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer)
} else {
DV_SET(dt, 1);
}
/* set width last because it will pull all the other
* parameters down to required values */
DV_SET(width, max_width);
/* Do the read only INQUIRY tests */
spi_dv_retrain(sdev, buffer, buffer + sdev->inquiry_len,
spi_dv_device_compare_inquiry);

View File

@ -37,6 +37,6 @@ static inline void cpm_set_smc_fcr(volatile smc_uart_t * up)
up->smc_tfcr = SMC_EB;
}
#define DPRAM_BASE ((unsigned char *)&cpmp->cp_dpmem[0])
#define DPRAM_BASE ((unsigned char *)cpm_dpram_addr(0))
#endif

View File

@ -38,7 +38,7 @@
#include <asm/prom.h>
#include <asm/of_device.h>
#if defined(CONFIG_SERIAL_SUNZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#if defined(CONFIG_SERIAL_SUNSAB_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
#endif

View File

@ -431,6 +431,7 @@ static int w1_uevent(struct device *dev, char **envp, int num_envp,
err = add_uevent_var(envp, num_envp, &cur_index, buffer, buffer_size,
&cur_len, "W1_SLAVE_ID=%024LX",
(unsigned long long)sl->reg_num.id);
envp[cur_index] = NULL;
if (err)
return err;

Some files were not shown because too many files have changed in this diff Show More