ARM: 6020/1: ST SPEAr: Adding gpio pad multiplexing support

GPIO Pads in spear platform are are multiplexed in various machines.
This patch adds support for this pad multiplexing.

Reviewed-by: Linus Walleij <linux.walleij@stericsson.com>
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
viresh kumar 2010-04-01 12:31:29 +01:00 committed by Russell King
parent b77932a4d2
commit 70f4c0bf9e
11 changed files with 1798 additions and 8 deletions

View File

@ -19,7 +19,9 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
#include <plat/padmux.h>
/* spear3xx declarations */
/*
* Each GPT has 2 timer channels
* Following GPT channels will be used as clock source and clockevent
@ -34,25 +36,170 @@ extern struct amba_device uart_device;
extern struct sys_timer spear_sys_timer;
/* Add spear3xx family function declarations here */
void __init clk_init(void);
void __init spear3xx_map_io(void);
void __init spear3xx_init_irq(void);
void __init spear3xx_init(void);
void __init spear300_init(void);
void __init spear310_init(void);
void __init spear320_init(void);
void __init clk_init(void);
void spear_pmx_init(struct pmx_driver *pmx_driver, uint base, uint size);
/* Add spear300 machine device structure declarations here */
/* pad mux declarations */
#define PMX_FIRDA_MASK (1 << 14)
#define PMX_I2C_MASK (1 << 13)
#define PMX_SSP_CS_MASK (1 << 12)
#define PMX_SSP_MASK (1 << 11)
#define PMX_MII_MASK (1 << 10)
#define PMX_GPIO_PIN0_MASK (1 << 9)
#define PMX_GPIO_PIN1_MASK (1 << 8)
#define PMX_GPIO_PIN2_MASK (1 << 7)
#define PMX_GPIO_PIN3_MASK (1 << 6)
#define PMX_GPIO_PIN4_MASK (1 << 5)
#define PMX_GPIO_PIN5_MASK (1 << 4)
#define PMX_UART0_MODEM_MASK (1 << 3)
#define PMX_UART0_MASK (1 << 2)
#define PMX_TIMER_3_4_MASK (1 << 1)
#define PMX_TIMER_1_2_MASK (1 << 0)
/* pad mux devices */
extern struct pmx_dev pmx_firda;
extern struct pmx_dev pmx_i2c;
extern struct pmx_dev pmx_ssp_cs;
extern struct pmx_dev pmx_ssp;
extern struct pmx_dev pmx_mii;
extern struct pmx_dev pmx_gpio_pin0;
extern struct pmx_dev pmx_gpio_pin1;
extern struct pmx_dev pmx_gpio_pin2;
extern struct pmx_dev pmx_gpio_pin3;
extern struct pmx_dev pmx_gpio_pin4;
extern struct pmx_dev pmx_gpio_pin5;
extern struct pmx_dev pmx_uart0_modem;
extern struct pmx_dev pmx_uart0;
extern struct pmx_dev pmx_timer_3_4;
extern struct pmx_dev pmx_timer_1_2;
#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
/* padmux plgpio devices */
extern struct pmx_dev pmx_plgpio_0_1;
extern struct pmx_dev pmx_plgpio_2_3;
extern struct pmx_dev pmx_plgpio_4_5;
extern struct pmx_dev pmx_plgpio_6_9;
extern struct pmx_dev pmx_plgpio_10_27;
extern struct pmx_dev pmx_plgpio_28;
extern struct pmx_dev pmx_plgpio_29;
extern struct pmx_dev pmx_plgpio_30;
extern struct pmx_dev pmx_plgpio_31;
extern struct pmx_dev pmx_plgpio_32;
extern struct pmx_dev pmx_plgpio_33;
extern struct pmx_dev pmx_plgpio_34_36;
extern struct pmx_dev pmx_plgpio_37_42;
extern struct pmx_dev pmx_plgpio_43_44_47_48;
extern struct pmx_dev pmx_plgpio_45_46_49_50;
#endif
extern struct pmx_driver pmx_driver;
/* spear300 declarations */
#ifdef CONFIG_MACH_SPEAR300
/* Add spear300 machine device structure declarations here */
extern struct amba_device gpio1_device;
/* pad mux modes */
extern struct pmx_mode nand_mode;
extern struct pmx_mode nor_mode;
extern struct pmx_mode photo_frame_mode;
extern struct pmx_mode lend_ip_phone_mode;
extern struct pmx_mode hend_ip_phone_mode;
extern struct pmx_mode lend_wifi_phone_mode;
extern struct pmx_mode hend_wifi_phone_mode;
extern struct pmx_mode ata_pabx_wi2s_mode;
extern struct pmx_mode ata_pabx_i2s_mode;
extern struct pmx_mode caml_lcdw_mode;
extern struct pmx_mode camu_lcd_mode;
extern struct pmx_mode camu_wlcd_mode;
extern struct pmx_mode caml_lcd_mode;
/* pad mux devices */
extern struct pmx_dev pmx_fsmc_2_chips;
extern struct pmx_dev pmx_fsmc_4_chips;
extern struct pmx_dev pmx_keyboard;
extern struct pmx_dev pmx_clcd;
extern struct pmx_dev pmx_telecom_gpio;
extern struct pmx_dev pmx_telecom_tdm;
extern struct pmx_dev pmx_telecom_spi_cs_i2c_clk;
extern struct pmx_dev pmx_telecom_camera;
extern struct pmx_dev pmx_telecom_dac;
extern struct pmx_dev pmx_telecom_i2s;
extern struct pmx_dev pmx_telecom_boot_pins;
extern struct pmx_dev pmx_telecom_sdio_4bit;
extern struct pmx_dev pmx_telecom_sdio_8bit;
extern struct pmx_dev pmx_gpio1;
void spear300_pmx_init(void);
/* Add spear300 machine function declarations here */
void __init spear300_init(void);
#endif /* CONFIG_MACH_SPEAR300 */
/* Add spear310 machine device structure declarations here */
/* spear310 declarations */
#ifdef CONFIG_MACH_SPEAR310
/* Add spear310 machine device structure declarations here */
/* pad mux devices */
extern struct pmx_dev pmx_emi_cs_0_1_4_5;
extern struct pmx_dev pmx_emi_cs_2_3;
extern struct pmx_dev pmx_uart1;
extern struct pmx_dev pmx_uart2;
extern struct pmx_dev pmx_uart3_4_5;
extern struct pmx_dev pmx_fsmc;
extern struct pmx_dev pmx_rs485_0_1;
extern struct pmx_dev pmx_tdm0;
void spear310_pmx_init(void);
/* Add spear310 machine function declarations here */
void __init spear310_init(void);
#endif /* CONFIG_MACH_SPEAR310 */
/* Add spear320 machine device structure declarations here */
/* spear320 declarations */
#ifdef CONFIG_MACH_SPEAR320
/* Add spear320 machine device structure declarations here */
/* pad mux modes */
extern struct pmx_mode auto_net_smii_mode;
extern struct pmx_mode auto_net_mii_mode;
extern struct pmx_mode auto_exp_mode;
extern struct pmx_mode small_printers_mode;
/* pad mux devices */
extern struct pmx_dev pmx_clcd;
extern struct pmx_dev pmx_emi;
extern struct pmx_dev pmx_fsmc;
extern struct pmx_dev pmx_spp;
extern struct pmx_dev pmx_sdio;
extern struct pmx_dev pmx_i2s;
extern struct pmx_dev pmx_uart1;
extern struct pmx_dev pmx_uart1_modem;
extern struct pmx_dev pmx_uart2;
extern struct pmx_dev pmx_touchscreen;
extern struct pmx_dev pmx_can;
extern struct pmx_dev pmx_sdio_led;
extern struct pmx_dev pmx_pwm0;
extern struct pmx_dev pmx_pwm1;
extern struct pmx_dev pmx_pwm2;
extern struct pmx_dev pmx_pwm3;
extern struct pmx_dev pmx_ssp1;
extern struct pmx_dev pmx_ssp2;
extern struct pmx_dev pmx_mii1;
extern struct pmx_dev pmx_smii0;
extern struct pmx_dev pmx_smii1;
extern struct pmx_dev pmx_i2c1;
void spear320_pmx_init(void);
/* Add spear320 machine function declarations here */
void __init spear320_init(void);
#endif /* CONFIG_MACH_SPEAR320 */
#endif /* __MACH_GENERIC_H */

View File

@ -18,6 +18,357 @@
#include <mach/generic.h>
#include <mach/spear.h>
/* pad multiplexing support */
/* muxing registers */
#define PAD_MUX_CONFIG_REG 0x00
#define MODE_CONFIG_REG 0x04
/* modes */
#define NAND_MODE (1 << 0)
#define NOR_MODE (1 << 1)
#define PHOTO_FRAME_MODE (1 << 2)
#define LEND_IP_PHONE_MODE (1 << 3)
#define HEND_IP_PHONE_MODE (1 << 4)
#define LEND_WIFI_PHONE_MODE (1 << 5)
#define HEND_WIFI_PHONE_MODE (1 << 6)
#define ATA_PABX_WI2S_MODE (1 << 7)
#define ATA_PABX_I2S_MODE (1 << 8)
#define CAML_LCDW_MODE (1 << 9)
#define CAMU_LCD_MODE (1 << 10)
#define CAMU_WLCD_MODE (1 << 11)
#define CAML_LCD_MODE (1 << 12)
#define ALL_MODES 0x1FFF
struct pmx_mode nand_mode = {
.id = NAND_MODE,
.name = "nand mode",
.mask = 0x00,
};
struct pmx_mode nor_mode = {
.id = NOR_MODE,
.name = "nor mode",
.mask = 0x01,
};
struct pmx_mode photo_frame_mode = {
.id = PHOTO_FRAME_MODE,
.name = "photo frame mode",
.mask = 0x02,
};
struct pmx_mode lend_ip_phone_mode = {
.id = LEND_IP_PHONE_MODE,
.name = "lend ip phone mode",
.mask = 0x03,
};
struct pmx_mode hend_ip_phone_mode = {
.id = HEND_IP_PHONE_MODE,
.name = "hend ip phone mode",
.mask = 0x04,
};
struct pmx_mode lend_wifi_phone_mode = {
.id = LEND_WIFI_PHONE_MODE,
.name = "lend wifi phone mode",
.mask = 0x05,
};
struct pmx_mode hend_wifi_phone_mode = {
.id = HEND_WIFI_PHONE_MODE,
.name = "hend wifi phone mode",
.mask = 0x06,
};
struct pmx_mode ata_pabx_wi2s_mode = {
.id = ATA_PABX_WI2S_MODE,
.name = "ata pabx wi2s mode",
.mask = 0x07,
};
struct pmx_mode ata_pabx_i2s_mode = {
.id = ATA_PABX_I2S_MODE,
.name = "ata pabx i2s mode",
.mask = 0x08,
};
struct pmx_mode caml_lcdw_mode = {
.id = CAML_LCDW_MODE,
.name = "caml lcdw mode",
.mask = 0x0C,
};
struct pmx_mode camu_lcd_mode = {
.id = CAMU_LCD_MODE,
.name = "camu lcd mode",
.mask = 0x0D,
};
struct pmx_mode camu_wlcd_mode = {
.id = CAMU_WLCD_MODE,
.name = "camu wlcd mode",
.mask = 0x0E,
};
struct pmx_mode caml_lcd_mode = {
.id = CAML_LCD_MODE,
.name = "caml lcd mode",
.mask = 0x0F,
};
/* devices */
struct pmx_dev_mode pmx_fsmc_2_chips_modes[] = {
{
.ids = NAND_MODE | NOR_MODE | PHOTO_FRAME_MODE |
ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE,
.mask = PMX_FIRDA_MASK,
},
};
struct pmx_dev pmx_fsmc_2_chips = {
.name = "fsmc_2_chips",
.modes = pmx_fsmc_2_chips_modes,
.mode_count = ARRAY_SIZE(pmx_fsmc_2_chips_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_fsmc_4_chips_modes[] = {
{
.ids = NAND_MODE | NOR_MODE | PHOTO_FRAME_MODE |
ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE,
.mask = PMX_FIRDA_MASK | PMX_UART0_MASK,
},
};
struct pmx_dev pmx_fsmc_4_chips = {
.name = "fsmc_4_chips",
.modes = pmx_fsmc_4_chips_modes,
.mode_count = ARRAY_SIZE(pmx_fsmc_4_chips_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_keyboard_modes[] = {
{
.ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE |
LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE |
CAML_LCDW_MODE | CAMU_LCD_MODE | CAMU_WLCD_MODE |
CAML_LCD_MODE,
.mask = 0x0,
},
};
struct pmx_dev pmx_keyboard = {
.name = "keyboard",
.modes = pmx_keyboard_modes,
.mode_count = ARRAY_SIZE(pmx_keyboard_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_clcd_modes[] = {
{
.ids = PHOTO_FRAME_MODE,
.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK ,
}, {
.ids = HEND_IP_PHONE_MODE | HEND_WIFI_PHONE_MODE |
CAMU_LCD_MODE | CAML_LCD_MODE,
.mask = PMX_TIMER_3_4_MASK,
},
};
struct pmx_dev pmx_clcd = {
.name = "clcd",
.modes = pmx_clcd_modes,
.mode_count = ARRAY_SIZE(pmx_clcd_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_telecom_gpio_modes[] = {
{
.ids = PHOTO_FRAME_MODE | CAMU_LCD_MODE | CAML_LCD_MODE,
.mask = PMX_MII_MASK,
}, {
.ids = LEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE,
.mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
}, {
.ids = ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_WLCD_MODE,
.mask = PMX_MII_MASK | PMX_TIMER_3_4_MASK,
}, {
.ids = HEND_IP_PHONE_MODE | HEND_WIFI_PHONE_MODE,
.mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK,
}, {
.ids = ATA_PABX_WI2S_MODE,
.mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK
| PMX_UART0_MODEM_MASK,
},
};
struct pmx_dev pmx_telecom_gpio = {
.name = "telecom_gpio",
.modes = pmx_telecom_gpio_modes,
.mode_count = ARRAY_SIZE(pmx_telecom_gpio_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_telecom_tdm_modes[] = {
{
.ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE
| HEND_WIFI_PHONE_MODE | ATA_PABX_WI2S_MODE
| ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE
| CAMU_WLCD_MODE | CAML_LCD_MODE,
.mask = PMX_UART0_MODEM_MASK | PMX_SSP_CS_MASK,
},
};
struct pmx_dev pmx_telecom_tdm = {
.name = "telecom_tdm",
.modes = pmx_telecom_tdm_modes,
.mode_count = ARRAY_SIZE(pmx_telecom_tdm_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_telecom_spi_cs_i2c_clk_modes[] = {
{
.ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE |
LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE
| ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE |
CAML_LCDW_MODE | CAML_LCD_MODE,
.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
},
};
struct pmx_dev pmx_telecom_spi_cs_i2c_clk = {
.name = "telecom_spi_cs_i2c_clk",
.modes = pmx_telecom_spi_cs_i2c_clk_modes,
.mode_count = ARRAY_SIZE(pmx_telecom_spi_cs_i2c_clk_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_telecom_camera_modes[] = {
{
.ids = CAML_LCDW_MODE | CAML_LCD_MODE,
.mask = PMX_MII_MASK,
}, {
.ids = CAMU_LCD_MODE | CAMU_WLCD_MODE,
.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK | PMX_MII_MASK,
},
};
struct pmx_dev pmx_telecom_camera = {
.name = "telecom_camera",
.modes = pmx_telecom_camera_modes,
.mode_count = ARRAY_SIZE(pmx_telecom_camera_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_telecom_dac_modes[] = {
{
.ids = ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE
| CAMU_WLCD_MODE | CAML_LCD_MODE,
.mask = PMX_TIMER_1_2_MASK,
},
};
struct pmx_dev pmx_telecom_dac = {
.name = "telecom_dac",
.modes = pmx_telecom_dac_modes,
.mode_count = ARRAY_SIZE(pmx_telecom_dac_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_telecom_i2s_modes[] = {
{
.ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE
| LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE |
ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE
| CAMU_WLCD_MODE | CAML_LCD_MODE,
.mask = PMX_UART0_MODEM_MASK,
},
};
struct pmx_dev pmx_telecom_i2s = {
.name = "telecom_i2s",
.modes = pmx_telecom_i2s_modes,
.mode_count = ARRAY_SIZE(pmx_telecom_i2s_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_telecom_boot_pins_modes[] = {
{
.ids = NAND_MODE | NOR_MODE,
.mask = PMX_UART0_MODEM_MASK | PMX_TIMER_1_2_MASK |
PMX_TIMER_3_4_MASK,
},
};
struct pmx_dev pmx_telecom_boot_pins = {
.name = "telecom_boot_pins",
.modes = pmx_telecom_boot_pins_modes,
.mode_count = ARRAY_SIZE(pmx_telecom_boot_pins_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_telecom_sdio_4bit_modes[] = {
{
.ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE |
HEND_WIFI_PHONE_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE |
CAMU_WLCD_MODE | CAML_LCD_MODE | ATA_PABX_WI2S_MODE |
ATA_PABX_I2S_MODE,
.mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK |
PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK |
PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK,
},
};
struct pmx_dev pmx_telecom_sdio_4bit = {
.name = "telecom_sdio_4bit",
.modes = pmx_telecom_sdio_4bit_modes,
.mode_count = ARRAY_SIZE(pmx_telecom_sdio_4bit_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_telecom_sdio_8bit_modes[] = {
{
.ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE |
HEND_WIFI_PHONE_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE |
CAMU_WLCD_MODE | CAML_LCD_MODE,
.mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK |
PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK |
PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK | PMX_MII_MASK,
},
};
struct pmx_dev pmx_telecom_sdio_8bit = {
.name = "telecom_sdio_8bit",
.modes = pmx_telecom_sdio_8bit_modes,
.mode_count = ARRAY_SIZE(pmx_telecom_sdio_8bit_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_gpio1_modes[] = {
{
.ids = PHOTO_FRAME_MODE,
.mask = PMX_UART0_MODEM_MASK | PMX_TIMER_1_2_MASK |
PMX_TIMER_3_4_MASK,
},
};
struct pmx_dev pmx_gpio1 = {
.name = "arm gpio1",
.modes = pmx_gpio1_modes,
.mode_count = ARRAY_SIZE(pmx_gpio1_modes),
.enb_on_reset = 1,
};
/* pmx driver structure */
struct pmx_driver pmx_driver = {
.mode_reg = {.offset = MODE_CONFIG_REG, .mask = 0x0000000f},
.mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
};
/* Add spear300 specific devices here */
/* arm gpio1 device registeration */
static struct pl061_platform_data gpio1_plat_data = {
@ -38,8 +389,15 @@ struct amba_device gpio1_device = {
.irq = {IRQ_GEN_RAS_1, NO_IRQ},
};
/* spear300 routines */
void __init spear300_init(void)
{
/* call spear3xx family common init function */
spear3xx_init();
}
void spear300_pmx_init(void)
{
spear_pmx_init(&pmx_driver, SPEAR300_SOC_CONFIG_BASE,
SPEAR300_SOC_CONFIG_SIZE);
}

View File

@ -16,6 +16,22 @@
#include <mach/generic.h>
#include <mach/spear.h>
/* padmux devices to enable */
static struct pmx_dev *pmx_devs[] = {
/* spear3xx specific devices */
&pmx_i2c,
&pmx_ssp_cs,
&pmx_ssp,
&pmx_mii,
&pmx_uart0,
/* spear300 specific devices */
&pmx_fsmc_2_chips,
&pmx_clcd,
&pmx_telecom_sdio_4bit,
&pmx_gpio1,
};
static struct amba_device *amba_devs[] __initdata = {
/* spear3xx specific devices */
&gpio_device,
@ -38,6 +54,12 @@ static void __init spear300_evb_init(void)
/* call spear300 machine init function */
spear300_init();
/* padmux initialization */
pmx_driver.mode = &photo_frame_mode;
pmx_driver.devs = pmx_devs;
pmx_driver.devs_count = ARRAY_SIZE(pmx_devs);
spear300_pmx_init();
/* Add Platform Devices */
platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));

View File

@ -16,10 +16,139 @@
#include <mach/generic.h>
#include <mach/spear.h>
/* pad multiplexing support */
/* muxing registers */
#define PAD_MUX_CONFIG_REG 0x08
/* devices */
struct pmx_dev_mode pmx_emi_cs_0_1_4_5_modes[] = {
{
.ids = 0x00,
.mask = PMX_TIMER_3_4_MASK,
},
};
struct pmx_dev pmx_emi_cs_0_1_4_5 = {
.name = "emi_cs_0_1_4_5",
.modes = pmx_emi_cs_0_1_4_5_modes,
.mode_count = ARRAY_SIZE(pmx_emi_cs_0_1_4_5_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_emi_cs_2_3_modes[] = {
{
.ids = 0x00,
.mask = PMX_TIMER_1_2_MASK,
},
};
struct pmx_dev pmx_emi_cs_2_3 = {
.name = "emi_cs_2_3",
.modes = pmx_emi_cs_2_3_modes,
.mode_count = ARRAY_SIZE(pmx_emi_cs_2_3_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_uart1_modes[] = {
{
.ids = 0x00,
.mask = PMX_FIRDA_MASK,
},
};
struct pmx_dev pmx_uart1 = {
.name = "uart1",
.modes = pmx_uart1_modes,
.mode_count = ARRAY_SIZE(pmx_uart1_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_uart2_modes[] = {
{
.ids = 0x00,
.mask = PMX_TIMER_1_2_MASK,
},
};
struct pmx_dev pmx_uart2 = {
.name = "uart2",
.modes = pmx_uart2_modes,
.mode_count = ARRAY_SIZE(pmx_uart2_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_uart3_4_5_modes[] = {
{
.ids = 0x00,
.mask = PMX_UART0_MODEM_MASK,
},
};
struct pmx_dev pmx_uart3_4_5 = {
.name = "uart3_4_5",
.modes = pmx_uart3_4_5_modes,
.mode_count = ARRAY_SIZE(pmx_uart3_4_5_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_fsmc_modes[] = {
{
.ids = 0x00,
.mask = PMX_SSP_CS_MASK,
},
};
struct pmx_dev pmx_fsmc = {
.name = "fsmc",
.modes = pmx_fsmc_modes,
.mode_count = ARRAY_SIZE(pmx_fsmc_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_rs485_0_1_modes[] = {
{
.ids = 0x00,
.mask = PMX_MII_MASK,
},
};
struct pmx_dev pmx_rs485_0_1 = {
.name = "rs485_0_1",
.modes = pmx_rs485_0_1_modes,
.mode_count = ARRAY_SIZE(pmx_rs485_0_1_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_tdm0_modes[] = {
{
.ids = 0x00,
.mask = PMX_MII_MASK,
},
};
struct pmx_dev pmx_tdm0 = {
.name = "tdm0",
.modes = pmx_tdm0_modes,
.mode_count = ARRAY_SIZE(pmx_tdm0_modes),
.enb_on_reset = 1,
};
/* pmx driver structure */
struct pmx_driver pmx_driver = {
.mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
};
/* Add spear310 specific devices here */
/* spear310 routines */
void __init spear310_init(void)
{
/* call spear3xx family common init function */
spear3xx_init();
}
void spear310_pmx_init(void)
{
spear_pmx_init(&pmx_driver, SPEAR310_SOC_CONFIG_BASE,
SPEAR310_SOC_CONFIG_SIZE);
}

View File

@ -16,6 +16,30 @@
#include <mach/generic.h>
#include <mach/spear.h>
/* padmux devices to enable */
static struct pmx_dev *pmx_devs[] = {
/* spear3xx specific devices */
&pmx_i2c,
&pmx_ssp,
&pmx_gpio_pin0,
&pmx_gpio_pin1,
&pmx_gpio_pin2,
&pmx_gpio_pin3,
&pmx_gpio_pin4,
&pmx_gpio_pin5,
&pmx_uart0,
/* spear310 specific devices */
&pmx_emi_cs_0_1_4_5,
&pmx_emi_cs_2_3,
&pmx_uart1,
&pmx_uart2,
&pmx_uart3_4_5,
&pmx_fsmc,
&pmx_rs485_0_1,
&pmx_tdm0,
};
static struct amba_device *amba_devs[] __initdata = {
/* spear3xx specific devices */
&gpio_device,
@ -37,6 +61,12 @@ static void __init spear310_evb_init(void)
/* call spear310 machine init function */
spear310_init();
/* padmux initialization */
pmx_driver.mode = NULL;
pmx_driver.devs = pmx_devs;
pmx_driver.devs_count = ARRAY_SIZE(pmx_devs);
spear310_pmx_init();
/* Add Platform Devices */
platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));

View File

@ -16,10 +16,384 @@
#include <mach/generic.h>
#include <mach/spear.h>
/* pad multiplexing support */
/* muxing registers */
#define PAD_MUX_CONFIG_REG 0x0C
#define MODE_CONFIG_REG 0x10
/* modes */
#define AUTO_NET_SMII_MODE (1 << 0)
#define AUTO_NET_MII_MODE (1 << 1)
#define AUTO_EXP_MODE (1 << 2)
#define SMALL_PRINTERS_MODE (1 << 3)
#define ALL_MODES 0xF
struct pmx_mode auto_net_smii_mode = {
.id = AUTO_NET_SMII_MODE,
.name = "Automation Networking SMII Mode",
.mask = 0x00,
};
struct pmx_mode auto_net_mii_mode = {
.id = AUTO_NET_MII_MODE,
.name = "Automation Networking MII Mode",
.mask = 0x01,
};
struct pmx_mode auto_exp_mode = {
.id = AUTO_EXP_MODE,
.name = "Automation Expanded Mode",
.mask = 0x02,
};
struct pmx_mode small_printers_mode = {
.id = SMALL_PRINTERS_MODE,
.name = "Small Printers Mode",
.mask = 0x03,
};
/* devices */
struct pmx_dev_mode pmx_clcd_modes[] = {
{
.ids = AUTO_NET_SMII_MODE,
.mask = 0x0,
},
};
struct pmx_dev pmx_clcd = {
.name = "clcd",
.modes = pmx_clcd_modes,
.mode_count = ARRAY_SIZE(pmx_clcd_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_emi_modes[] = {
{
.ids = AUTO_EXP_MODE,
.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
},
};
struct pmx_dev pmx_emi = {
.name = "emi",
.modes = pmx_emi_modes,
.mode_count = ARRAY_SIZE(pmx_emi_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_fsmc_modes[] = {
{
.ids = ALL_MODES,
.mask = 0x0,
},
};
struct pmx_dev pmx_fsmc = {
.name = "fsmc",
.modes = pmx_fsmc_modes,
.mode_count = ARRAY_SIZE(pmx_fsmc_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_spp_modes[] = {
{
.ids = SMALL_PRINTERS_MODE,
.mask = 0x0,
},
};
struct pmx_dev pmx_spp = {
.name = "spp",
.modes = pmx_spp_modes,
.mode_count = ARRAY_SIZE(pmx_spp_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_sdio_modes[] = {
{
.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE |
SMALL_PRINTERS_MODE,
.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
},
};
struct pmx_dev pmx_sdio = {
.name = "sdio",
.modes = pmx_sdio_modes,
.mode_count = ARRAY_SIZE(pmx_sdio_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_i2s_modes[] = {
{
.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
.mask = PMX_UART0_MODEM_MASK,
},
};
struct pmx_dev pmx_i2s = {
.name = "i2s",
.modes = pmx_i2s_modes,
.mode_count = ARRAY_SIZE(pmx_i2s_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_uart1_modes[] = {
{
.ids = ALL_MODES,
.mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK,
},
};
struct pmx_dev pmx_uart1 = {
.name = "uart1",
.modes = pmx_uart1_modes,
.mode_count = ARRAY_SIZE(pmx_uart1_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_uart1_modem_modes[] = {
{
.ids = AUTO_EXP_MODE,
.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK |
PMX_SSP_CS_MASK,
}, {
.ids = SMALL_PRINTERS_MODE,
.mask = PMX_GPIO_PIN3_MASK | PMX_GPIO_PIN4_MASK |
PMX_GPIO_PIN5_MASK | PMX_SSP_CS_MASK,
},
};
struct pmx_dev pmx_uart1_modem = {
.name = "uart1_modem",
.modes = pmx_uart1_modem_modes,
.mode_count = ARRAY_SIZE(pmx_uart1_modem_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_uart2_modes[] = {
{
.ids = ALL_MODES,
.mask = PMX_FIRDA_MASK,
},
};
struct pmx_dev pmx_uart2 = {
.name = "uart2",
.modes = pmx_uart2_modes,
.mode_count = ARRAY_SIZE(pmx_uart2_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_touchscreen_modes[] = {
{
.ids = AUTO_NET_SMII_MODE,
.mask = PMX_SSP_CS_MASK,
},
};
struct pmx_dev pmx_touchscreen = {
.name = "touchscreen",
.modes = pmx_touchscreen_modes,
.mode_count = ARRAY_SIZE(pmx_touchscreen_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_can_modes[] = {
{
.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE | AUTO_EXP_MODE,
.mask = PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK |
PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK,
},
};
struct pmx_dev pmx_can = {
.name = "can",
.modes = pmx_can_modes,
.mode_count = ARRAY_SIZE(pmx_can_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_sdio_led_modes[] = {
{
.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
.mask = PMX_SSP_CS_MASK,
},
};
struct pmx_dev pmx_sdio_led = {
.name = "sdio_led",
.modes = pmx_sdio_led_modes,
.mode_count = ARRAY_SIZE(pmx_sdio_led_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_pwm0_modes[] = {
{
.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
.mask = PMX_UART0_MODEM_MASK,
}, {
.ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
.mask = PMX_MII_MASK,
},
};
struct pmx_dev pmx_pwm0 = {
.name = "pwm0",
.modes = pmx_pwm0_modes,
.mode_count = ARRAY_SIZE(pmx_pwm0_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_pwm1_modes[] = {
{
.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
.mask = PMX_UART0_MODEM_MASK,
}, {
.ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
.mask = PMX_MII_MASK,
},
};
struct pmx_dev pmx_pwm1 = {
.name = "pwm1",
.modes = pmx_pwm1_modes,
.mode_count = ARRAY_SIZE(pmx_pwm1_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_pwm2_modes[] = {
{
.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
.mask = PMX_SSP_CS_MASK,
}, {
.ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
.mask = PMX_MII_MASK,
},
};
struct pmx_dev pmx_pwm2 = {
.name = "pwm2",
.modes = pmx_pwm2_modes,
.mode_count = ARRAY_SIZE(pmx_pwm2_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_pwm3_modes[] = {
{
.ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE | AUTO_NET_SMII_MODE,
.mask = PMX_MII_MASK,
},
};
struct pmx_dev pmx_pwm3 = {
.name = "pwm3",
.modes = pmx_pwm3_modes,
.mode_count = ARRAY_SIZE(pmx_pwm3_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_ssp1_modes[] = {
{
.ids = SMALL_PRINTERS_MODE | AUTO_NET_SMII_MODE,
.mask = PMX_MII_MASK,
},
};
struct pmx_dev pmx_ssp1 = {
.name = "ssp1",
.modes = pmx_ssp1_modes,
.mode_count = ARRAY_SIZE(pmx_ssp1_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_ssp2_modes[] = {
{
.ids = AUTO_NET_SMII_MODE,
.mask = PMX_MII_MASK,
},
};
struct pmx_dev pmx_ssp2 = {
.name = "ssp2",
.modes = pmx_ssp2_modes,
.mode_count = ARRAY_SIZE(pmx_ssp2_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_mii1_modes[] = {
{
.ids = AUTO_NET_MII_MODE,
.mask = 0x0,
},
};
struct pmx_dev pmx_mii1 = {
.name = "mii1",
.modes = pmx_mii1_modes,
.mode_count = ARRAY_SIZE(pmx_mii1_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_smii0_modes[] = {
{
.ids = AUTO_NET_SMII_MODE | AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
.mask = PMX_MII_MASK,
},
};
struct pmx_dev pmx_smii0 = {
.name = "smii0",
.modes = pmx_smii0_modes,
.mode_count = ARRAY_SIZE(pmx_smii0_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_smii1_modes[] = {
{
.ids = AUTO_NET_SMII_MODE | SMALL_PRINTERS_MODE,
.mask = PMX_MII_MASK,
},
};
struct pmx_dev pmx_smii1 = {
.name = "smii1",
.modes = pmx_smii1_modes,
.mode_count = ARRAY_SIZE(pmx_smii1_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_i2c1_modes[] = {
{
.ids = AUTO_EXP_MODE,
.mask = 0x0,
},
};
struct pmx_dev pmx_i2c1 = {
.name = "i2c1",
.modes = pmx_i2c1_modes,
.mode_count = ARRAY_SIZE(pmx_i2c1_modes),
.enb_on_reset = 1,
};
/* pmx driver structure */
struct pmx_driver pmx_driver = {
.mode_reg = {.offset = MODE_CONFIG_REG, .mask = 0x00000007},
.mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
};
/* Add spear320 specific devices here */
/* spear320 routines */
void __init spear320_init(void)
{
/* call spear3xx family common init function */
spear3xx_init();
}
void spear320_pmx_init(void)
{
spear_pmx_init(&pmx_driver, SPEAR320_SOC_CONFIG_BASE,
SPEAR320_SOC_CONFIG_SIZE);
}

View File

@ -16,6 +16,27 @@
#include <mach/generic.h>
#include <mach/spear.h>
/* padmux devices to enable */
static struct pmx_dev *pmx_devs[] = {
/* spear3xx specific devices */
&pmx_i2c,
&pmx_ssp,
&pmx_mii,
&pmx_uart0,
/* spear320 specific devices */
&pmx_fsmc,
&pmx_sdio,
&pmx_i2s,
&pmx_uart1,
&pmx_uart2,
&pmx_can,
&pmx_pwm0,
&pmx_pwm1,
&pmx_pwm2,
&pmx_mii1,
};
static struct amba_device *amba_devs[] __initdata = {
/* spear3xx specific devices */
&gpio_device,
@ -37,6 +58,12 @@ static void __init spear320_evb_init(void)
/* call spear320 machine init function */
spear320_init();
/* padmux initialization */
pmx_driver.mode = &auto_net_mii_mode;
pmx_driver.devs = pmx_devs;
pmx_driver.devs_count = ARRAY_SIZE(pmx_devs);
spear320_pmx_init();
/* Add Platform Devices */
platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));

View File

@ -99,3 +99,450 @@ void __init spear3xx_map_io(void)
/* This will initialize clock framework */
clk_init();
}
/* pad multiplexing support */
/* devices */
struct pmx_dev_mode pmx_firda_modes[] = {
{
.ids = 0xffffffff,
.mask = PMX_FIRDA_MASK,
},
};
struct pmx_dev pmx_firda = {
.name = "firda",
.modes = pmx_firda_modes,
.mode_count = ARRAY_SIZE(pmx_firda_modes),
.enb_on_reset = 0,
};
struct pmx_dev_mode pmx_i2c_modes[] = {
{
.ids = 0xffffffff,
.mask = PMX_I2C_MASK,
},
};
struct pmx_dev pmx_i2c = {
.name = "i2c",
.modes = pmx_i2c_modes,
.mode_count = ARRAY_SIZE(pmx_i2c_modes),
.enb_on_reset = 0,
};
struct pmx_dev_mode pmx_ssp_cs_modes[] = {
{
.ids = 0xffffffff,
.mask = PMX_SSP_CS_MASK,
},
};
struct pmx_dev pmx_ssp_cs = {
.name = "ssp_chip_selects",
.modes = pmx_ssp_cs_modes,
.mode_count = ARRAY_SIZE(pmx_ssp_cs_modes),
.enb_on_reset = 0,
};
struct pmx_dev_mode pmx_ssp_modes[] = {
{
.ids = 0xffffffff,
.mask = PMX_SSP_MASK,
},
};
struct pmx_dev pmx_ssp = {
.name = "ssp",
.modes = pmx_ssp_modes,
.mode_count = ARRAY_SIZE(pmx_ssp_modes),
.enb_on_reset = 0,
};
struct pmx_dev_mode pmx_mii_modes[] = {
{
.ids = 0xffffffff,
.mask = PMX_MII_MASK,
},
};
struct pmx_dev pmx_mii = {
.name = "mii",
.modes = pmx_mii_modes,
.mode_count = ARRAY_SIZE(pmx_mii_modes),
.enb_on_reset = 0,
};
struct pmx_dev_mode pmx_gpio_pin0_modes[] = {
{
.ids = 0xffffffff,
.mask = PMX_GPIO_PIN0_MASK,
},
};
struct pmx_dev pmx_gpio_pin0 = {
.name = "gpio_pin0",
.modes = pmx_gpio_pin0_modes,
.mode_count = ARRAY_SIZE(pmx_gpio_pin0_modes),
.enb_on_reset = 0,
};
struct pmx_dev_mode pmx_gpio_pin1_modes[] = {
{
.ids = 0xffffffff,
.mask = PMX_GPIO_PIN1_MASK,
},
};
struct pmx_dev pmx_gpio_pin1 = {
.name = "gpio_pin1",
.modes = pmx_gpio_pin1_modes,
.mode_count = ARRAY_SIZE(pmx_gpio_pin1_modes),
.enb_on_reset = 0,
};
struct pmx_dev_mode pmx_gpio_pin2_modes[] = {
{
.ids = 0xffffffff,
.mask = PMX_GPIO_PIN2_MASK,
},
};
struct pmx_dev pmx_gpio_pin2 = {
.name = "gpio_pin2",
.modes = pmx_gpio_pin2_modes,
.mode_count = ARRAY_SIZE(pmx_gpio_pin2_modes),
.enb_on_reset = 0,
};
struct pmx_dev_mode pmx_gpio_pin3_modes[] = {
{
.ids = 0xffffffff,
.mask = PMX_GPIO_PIN3_MASK,
},
};
struct pmx_dev pmx_gpio_pin3 = {
.name = "gpio_pin3",
.modes = pmx_gpio_pin3_modes,
.mode_count = ARRAY_SIZE(pmx_gpio_pin3_modes),
.enb_on_reset = 0,
};
struct pmx_dev_mode pmx_gpio_pin4_modes[] = {
{
.ids = 0xffffffff,
.mask = PMX_GPIO_PIN4_MASK,
},
};
struct pmx_dev pmx_gpio_pin4 = {
.name = "gpio_pin4",
.modes = pmx_gpio_pin4_modes,
.mode_count = ARRAY_SIZE(pmx_gpio_pin4_modes),
.enb_on_reset = 0,
};
struct pmx_dev_mode pmx_gpio_pin5_modes[] = {
{
.ids = 0xffffffff,
.mask = PMX_GPIO_PIN5_MASK,
},
};
struct pmx_dev pmx_gpio_pin5 = {
.name = "gpio_pin5",
.modes = pmx_gpio_pin5_modes,
.mode_count = ARRAY_SIZE(pmx_gpio_pin5_modes),
.enb_on_reset = 0,
};
struct pmx_dev_mode pmx_uart0_modem_modes[] = {
{
.ids = 0xffffffff,
.mask = PMX_UART0_MODEM_MASK,
},
};
struct pmx_dev pmx_uart0_modem = {
.name = "uart0_modem",
.modes = pmx_uart0_modem_modes,
.mode_count = ARRAY_SIZE(pmx_uart0_modem_modes),
.enb_on_reset = 0,
};
struct pmx_dev_mode pmx_uart0_modes[] = {
{
.ids = 0xffffffff,
.mask = PMX_UART0_MASK,
},
};
struct pmx_dev pmx_uart0 = {
.name = "uart0",
.modes = pmx_uart0_modes,
.mode_count = ARRAY_SIZE(pmx_uart0_modes),
.enb_on_reset = 0,
};
struct pmx_dev_mode pmx_timer_3_4_modes[] = {
{
.ids = 0xffffffff,
.mask = PMX_TIMER_3_4_MASK,
},
};
struct pmx_dev pmx_timer_3_4 = {
.name = "timer_3_4",
.modes = pmx_timer_3_4_modes,
.mode_count = ARRAY_SIZE(pmx_timer_3_4_modes),
.enb_on_reset = 0,
};
struct pmx_dev_mode pmx_timer_1_2_modes[] = {
{
.ids = 0xffffffff,
.mask = PMX_TIMER_1_2_MASK,
},
};
struct pmx_dev pmx_timer_1_2 = {
.name = "timer_1_2",
.modes = pmx_timer_1_2_modes,
.mode_count = ARRAY_SIZE(pmx_timer_1_2_modes),
.enb_on_reset = 0,
};
#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
/* plgpios devices */
struct pmx_dev_mode pmx_plgpio_0_1_modes[] = {
{
.ids = 0x00,
.mask = PMX_FIRDA_MASK,
},
};
struct pmx_dev pmx_plgpio_0_1 = {
.name = "plgpio 0 and 1",
.modes = pmx_plgpio_0_1_modes,
.mode_count = ARRAY_SIZE(pmx_plgpio_0_1_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_plgpio_2_3_modes[] = {
{
.ids = 0x00,
.mask = PMX_UART0_MASK,
},
};
struct pmx_dev pmx_plgpio_2_3 = {
.name = "plgpio 2 and 3",
.modes = pmx_plgpio_2_3_modes,
.mode_count = ARRAY_SIZE(pmx_plgpio_2_3_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_plgpio_4_5_modes[] = {
{
.ids = 0x00,
.mask = PMX_I2C_MASK,
},
};
struct pmx_dev pmx_plgpio_4_5 = {
.name = "plgpio 4 and 5",
.modes = pmx_plgpio_4_5_modes,
.mode_count = ARRAY_SIZE(pmx_plgpio_4_5_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_plgpio_6_9_modes[] = {
{
.ids = 0x00,
.mask = PMX_SSP_MASK,
},
};
struct pmx_dev pmx_plgpio_6_9 = {
.name = "plgpio 6 to 9",
.modes = pmx_plgpio_6_9_modes,
.mode_count = ARRAY_SIZE(pmx_plgpio_6_9_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_plgpio_10_27_modes[] = {
{
.ids = 0x00,
.mask = PMX_MII_MASK,
},
};
struct pmx_dev pmx_plgpio_10_27 = {
.name = "plgpio 10 to 27",
.modes = pmx_plgpio_10_27_modes,
.mode_count = ARRAY_SIZE(pmx_plgpio_10_27_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_plgpio_28_modes[] = {
{
.ids = 0x00,
.mask = PMX_GPIO_PIN0_MASK,
},
};
struct pmx_dev pmx_plgpio_28 = {
.name = "plgpio 28",
.modes = pmx_plgpio_28_modes,
.mode_count = ARRAY_SIZE(pmx_plgpio_28_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_plgpio_29_modes[] = {
{
.ids = 0x00,
.mask = PMX_GPIO_PIN1_MASK,
},
};
struct pmx_dev pmx_plgpio_29 = {
.name = "plgpio 29",
.modes = pmx_plgpio_29_modes,
.mode_count = ARRAY_SIZE(pmx_plgpio_29_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_plgpio_30_modes[] = {
{
.ids = 0x00,
.mask = PMX_GPIO_PIN2_MASK,
},
};
struct pmx_dev pmx_plgpio_30 = {
.name = "plgpio 30",
.modes = pmx_plgpio_30_modes,
.mode_count = ARRAY_SIZE(pmx_plgpio_30_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_plgpio_31_modes[] = {
{
.ids = 0x00,
.mask = PMX_GPIO_PIN3_MASK,
},
};
struct pmx_dev pmx_plgpio_31 = {
.name = "plgpio 31",
.modes = pmx_plgpio_31_modes,
.mode_count = ARRAY_SIZE(pmx_plgpio_31_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_plgpio_32_modes[] = {
{
.ids = 0x00,
.mask = PMX_GPIO_PIN4_MASK,
},
};
struct pmx_dev pmx_plgpio_32 = {
.name = "plgpio 32",
.modes = pmx_plgpio_32_modes,
.mode_count = ARRAY_SIZE(pmx_plgpio_32_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_plgpio_33_modes[] = {
{
.ids = 0x00,
.mask = PMX_GPIO_PIN5_MASK,
},
};
struct pmx_dev pmx_plgpio_33 = {
.name = "plgpio 33",
.modes = pmx_plgpio_33_modes,
.mode_count = ARRAY_SIZE(pmx_plgpio_33_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_plgpio_34_36_modes[] = {
{
.ids = 0x00,
.mask = PMX_SSP_CS_MASK,
},
};
struct pmx_dev pmx_plgpio_34_36 = {
.name = "plgpio 34 to 36",
.modes = pmx_plgpio_34_36_modes,
.mode_count = ARRAY_SIZE(pmx_plgpio_34_36_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_plgpio_37_42_modes[] = {
{
.ids = 0x00,
.mask = PMX_UART0_MODEM_MASK,
},
};
struct pmx_dev pmx_plgpio_37_42 = {
.name = "plgpio 37 to 42",
.modes = pmx_plgpio_37_42_modes,
.mode_count = ARRAY_SIZE(pmx_plgpio_37_42_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_plgpio_43_44_47_48_modes[] = {
{
.ids = 0x00,
.mask = PMX_TIMER_1_2_MASK,
},
};
struct pmx_dev pmx_plgpio_43_44_47_48 = {
.name = "plgpio 43, 44, 47 and 48",
.modes = pmx_plgpio_43_44_47_48_modes,
.mode_count = ARRAY_SIZE(pmx_plgpio_43_44_47_48_modes),
.enb_on_reset = 1,
};
struct pmx_dev_mode pmx_plgpio_45_46_49_50_modes[] = {
{
.ids = 0x00,
.mask = PMX_TIMER_3_4_MASK,
},
};
struct pmx_dev pmx_plgpio_45_46_49_50 = {
.name = "plgpio 45, 46, 49 and 50",
.modes = pmx_plgpio_45_46_49_50_modes,
.mode_count = ARRAY_SIZE(pmx_plgpio_45_46_49_50_modes),
.enb_on_reset = 1,
};
#endif
/* spear padmux initialization function */
void spear_pmx_init(struct pmx_driver *pmx_driver, uint base, uint size)
{
int ret = 0;
/* pad mux initialization */
pmx_driver->base = ioremap(base, size);
if (!pmx_driver->base) {
ret = -ENOMEM;
goto pmx_fail;
}
ret = pmx_register(pmx_driver);
iounmap(pmx_driver->base);
pmx_fail:
if (ret)
printk(KERN_ERR "padmux: registeration failed. err no: %d\n",
ret);
}

View File

@ -3,4 +3,4 @@
#
# Common support
obj-y := clock.o time.o
obj-y := clock.o padmux.o time.o

View File

@ -0,0 +1,92 @@
/*
* arch/arm/plat-spear/include/plat/padmux.h
*
* SPEAr platform specific gpio pads muxing file
*
* Copyright (C) 2009 ST Microelectronics
* Viresh Kumar<viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __PLAT_PADMUX_H
#define __PLAT_PADMUX_H
#include <linux/types.h>
/*
* struct pmx_reg: configuration structure for mode reg and mux reg
*
* offset: offset of mode reg
* mask: mask of mode reg
*/
struct pmx_reg {
u32 offset;
u32 mask;
};
/*
* struct pmx_dev_mode: configuration structure every group of modes of a device
*
* ids: all modes for this configuration
* mask: mask for supported mode
*/
struct pmx_dev_mode {
u32 ids;
u32 mask;
};
/*
* struct pmx_mode: mode definition structure
*
* name: mode name
* mask: mode mask
*/
struct pmx_mode {
char *name;
u32 id;
u32 mask;
};
/*
* struct pmx_dev: device definition structure
*
* name: device name
* modes: device configuration array for different modes supported
* mode_count: size of modes array
* is_active: is peripheral active/enabled
* enb_on_reset: if 1, mask bits to be cleared in reg otherwise to be set in reg
*/
struct pmx_dev {
char *name;
struct pmx_dev_mode *modes;
u8 mode_count;
bool is_active;
bool enb_on_reset;
};
/*
* struct pmx_driver: driver definition structure
*
* mode: mode to be set
* devs: array of pointer to pmx devices
* devs_count: ARRAY_SIZE of devs
* base: base address of soc config registers
* mode_reg: structure of mode config register
* mux_reg: structure of device mux config register
*/
struct pmx_driver {
struct pmx_mode *mode;
struct pmx_dev **devs;
u8 devs_count;
u32 *base;
struct pmx_reg mode_reg;
struct pmx_reg mux_reg;
};
/* pmx functions */
int pmx_register(struct pmx_driver *driver);
#endif /* __PLAT_PADMUX_H */

View File

@ -0,0 +1,164 @@
/*
* arch/arm/plat-spear/include/plat/padmux.c
*
* SPEAr platform specific gpio pads muxing source file
*
* Copyright (C) 2009 ST Microelectronics
* Viresh Kumar<viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/err.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <plat/padmux.h>
/*
* struct pmx: pmx definition structure
*
* base: base address of configuration registers
* mode_reg: mode configurations
* mux_reg: muxing configurations
* active_mode: pointer to current active mode
*/
struct pmx {
u32 base;
struct pmx_reg mode_reg;
struct pmx_reg mux_reg;
struct pmx_mode *active_mode;
};
static struct pmx *pmx;
/**
* pmx_mode_set - Enables an multiplexing mode
* @mode - pointer to pmx mode
*
* It will set mode of operation in hardware.
* Returns -ve on Err otherwise 0
*/
static int pmx_mode_set(struct pmx_mode *mode)
{
u32 val;
if (!mode->name)
return -EFAULT;
pmx->active_mode = mode;
val = readl(pmx->base + pmx->mode_reg.offset);
val &= ~pmx->mode_reg.mask;
val |= mode->mask & pmx->mode_reg.mask;
writel(val, pmx->base + pmx->mode_reg.offset);
return 0;
}
/**
* pmx_devs_enable - Enables list of devices
* @devs - pointer to pmx device array
* @count - number of devices to enable
*
* It will enable pads for all required peripherals once and only once.
* If peripheral is not supported by current mode then request is rejected.
* Conflicts between peripherals are not handled and peripherals will be
* enabled in the order they are present in pmx_dev array.
* In case of conflicts last peripheral enalbed will be present.
* Returns -ve on Err otherwise 0
*/
static int pmx_devs_enable(struct pmx_dev **devs, u8 count)
{
u32 val, i, mask;
if (!count)
return -EINVAL;
val = readl(pmx->base + pmx->mux_reg.offset);
for (i = 0; i < count; i++) {
u8 j = 0;
if (!devs[i]->name || !devs[i]->modes) {
printk(KERN_ERR "padmux: dev name or modes is null\n");
continue;
}
/* check if peripheral exists in active mode */
if (pmx->active_mode) {
bool found = false;
for (j = 0; j < devs[i]->mode_count; j++) {
if (devs[i]->modes[j].ids &
pmx->active_mode->id) {
found = true;
break;
}
}
if (found == false) {
printk(KERN_ERR "%s device not available in %s"\
"mode\n", devs[i]->name,
pmx->active_mode->name);
continue;
}
}
/* enable peripheral */
mask = devs[i]->modes[j].mask & pmx->mux_reg.mask;
if (devs[i]->enb_on_reset)
val &= ~mask;
else
val |= mask;
devs[i]->is_active = true;
}
writel(val, pmx->base + pmx->mux_reg.offset);
kfree(pmx);
/* this will ensure that multiplexing can't be changed now */
pmx = (struct pmx *)-1;
return 0;
}
/**
* pmx_register - registers a platform requesting pad mux feature
* @driver - pointer to driver structure containing driver specific parameters
*
* Also this must be called only once. This will allocate memory for pmx
* structure, will call pmx_mode_set, will call pmx_devs_enable.
* Returns -ve on Err otherwise 0
*/
int pmx_register(struct pmx_driver *driver)
{
int ret = 0;
if (pmx)
return -EPERM;
if (!driver->base || !driver->devs)
return -EFAULT;
pmx = kzalloc(sizeof(*pmx), GFP_KERNEL);
if (!pmx)
return -ENOMEM;
pmx->base = (u32)driver->base;
pmx->mode_reg.offset = driver->mode_reg.offset;
pmx->mode_reg.mask = driver->mode_reg.mask;
pmx->mux_reg.offset = driver->mux_reg.offset;
pmx->mux_reg.mask = driver->mux_reg.mask;
/* choose mode to enable */
if (driver->mode) {
ret = pmx_mode_set(driver->mode);
if (ret)
goto pmx_fail;
}
ret = pmx_devs_enable(driver->devs, driver->devs_count);
if (ret)
goto pmx_fail;
return 0;
pmx_fail:
return ret;
}