sata_mv ncq Add want ncq parameter for EDMA configuration

An extra EDMA config bit is required for NCQ operation.
So set/clear it as needed, and cache current setting in port_priv.
For now though, it will always be "off" (0).

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
This commit is contained in:
Mark Lord 2008-01-26 18:31:33 -05:00 committed by Jeff Garzik
parent 0c58912e19
commit 721091685f
1 changed files with 23 additions and 8 deletions

View File

@ -331,6 +331,7 @@ enum {
/* Port private flags (pp_flags) */
MV_PP_FLAG_EDMA_EN = (1 << 0), /* is EDMA engine enabled? */
MV_PP_FLAG_NCQ_EN = (1 << 1), /* is EDMA set up for NCQ? */
MV_PP_FLAG_HAD_A_RESET = (1 << 2), /* 1st hard reset complete? */
};
@ -471,8 +472,9 @@ static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio);
static void mv_reset_pci_bus(struct pci_dev *pdev, void __iomem *mmio);
static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio,
unsigned int port_no);
static void mv_edma_cfg(struct ata_port *ap, struct mv_host_priv *hpriv,
void __iomem *port_mmio);
static void mv_edma_cfg(struct mv_port_priv *pp, struct mv_host_priv *hpriv,
void __iomem *port_mmio, int want_ncq);
static int __mv_stop_dma(struct ata_port *ap);
static struct scsi_host_template mv5_sht = {
.module = THIS_MODULE,
@ -838,8 +840,15 @@ static void mv_set_edma_ptrs(void __iomem *port_mmio,
* Inherited from caller.
*/
static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio,
struct mv_port_priv *pp)
struct mv_port_priv *pp, u8 protocol)
{
int want_ncq = (protocol == ATA_PROT_NCQ);
if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
int using_ncq = ((pp->pp_flags & MV_PP_FLAG_NCQ_EN) != 0);
if (want_ncq != using_ncq)
__mv_stop_dma(ap);
}
if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN)) {
struct mv_host_priv *hpriv = ap->host->private_data;
int hard_port = mv_hardport_from_port(ap->port_no);
@ -859,7 +868,7 @@ static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio,
hc_mmio + HC_IRQ_CAUSE_OFS);
}
mv_edma_cfg(ap, hpriv, port_mmio);
mv_edma_cfg(pp, hpriv, port_mmio, want_ncq);
/* clear FIS IRQ Cause */
writelfl(0, port_mmio + SATA_FIS_IRQ_CAUSE_OFS);
@ -1045,8 +1054,8 @@ static int mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val)
return -EINVAL;
}
static void mv_edma_cfg(struct ata_port *ap, struct mv_host_priv *hpriv,
void __iomem *port_mmio)
static void mv_edma_cfg(struct mv_port_priv *pp, struct mv_host_priv *hpriv,
void __iomem *port_mmio, int want_ncq)
{
u32 cfg;
@ -1066,6 +1075,12 @@ static void mv_edma_cfg(struct ata_port *ap, struct mv_host_priv *hpriv,
cfg |= (1 << 17); /* enab cut-through (dis stor&forwrd) */
}
if (want_ncq) {
cfg |= EDMA_CFG_NCQ;
pp->pp_flags |= MV_PP_FLAG_NCQ_EN;
} else
pp->pp_flags &= ~MV_PP_FLAG_NCQ_EN;
writelfl(cfg, port_mmio + EDMA_CFG_OFS);
}
@ -1128,7 +1143,7 @@ static int mv_port_start(struct ata_port *ap)
spin_lock_irqsave(&ap->host->lock, flags);
mv_edma_cfg(ap, hpriv, port_mmio);
mv_edma_cfg(pp, hpriv, port_mmio, 0);
mv_set_edma_ptrs(port_mmio, hpriv, pp);
@ -1396,7 +1411,7 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
return ata_qc_issue_prot(qc);
}
mv_start_dma(ap, port_mmio, pp);
mv_start_dma(ap, port_mmio, pp, qc->tf.protocol);
in_index = pp->req_idx & MV_MAX_Q_DEPTH_MASK;