Merge branch 'linus' into tracing/blktrace

Conflicts:
	block/blktrace.c

Semantic merge:
	kernel/trace/blktrace.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
This commit is contained in:
Ingo Molnar 2009-02-19 09:00:35 +01:00
commit 72c26c9a26
181 changed files with 1994 additions and 816 deletions

View File

@ -2166,7 +2166,6 @@ D: Initial implementation of VC's, pty's and select()
N: Pavel Machek
E: pavel@ucw.cz
E: pavel@suse.cz
D: Softcursor for vga, hypertech cdrom support, vcsa bugfix, nbd
D: sun4/330 port, capabilities for elf, speedup for rm on ext2, USB,
D: work on suspend-to-ram/disk, killing duplicates from ioctl32

View File

@ -1,6 +1,6 @@
What: /sys/firmware/memmap/
Date: June 2008
Contact: Bernhard Walle <bwalle@suse.de>
Contact: Bernhard Walle <bernhard.walle@gmx.de>
Description:
On all platforms, the firmware provides a memory map which the
kernel reads. The resources from that memory map are registered

View File

@ -93,7 +93,7 @@ the PCI Express Port Bus driver from loading a service driver.
int pcie_port_service_register(struct pcie_port_service_driver *new)
This API replaces the Linux Driver Model's pci_module_init API. A
This API replaces the Linux Driver Model's pci_register_driver API. A
service driver should always calls pcie_port_service_register at
module init. Note that after service driver being loaded, calls
such as pci_enable_device(dev) and pci_set_master(dev) are no longer

View File

@ -252,10 +252,8 @@ cgroup file system directories.
When a task is moved from one cgroup to another, it gets a new
css_set pointer - if there's an already existing css_set with the
desired collection of cgroups then that group is reused, else a new
css_set is allocated. Note that the current implementation uses a
linear search to locate an appropriate existing css_set, so isn't
very efficient. A future version will use a hash table for better
performance.
css_set is allocated. The appropriate existing css_set is located by
looking into a hash table.
To allow access from a cgroup to the css_sets (and hence tasks)
that comprise it, a set of cg_cgroup_link objects form a lattice;

View File

@ -0,0 +1,101 @@
/* Disk protection for HP machines.
*
* Copyright 2008 Eric Piel
* Copyright 2009 Pavel Machek <pavel@suse.cz>
*
* GPLv2.
*/
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <string.h>
#include <stdint.h>
#include <errno.h>
#include <signal.h>
void write_int(char *path, int i)
{
char buf[1024];
int fd = open(path, O_RDWR);
if (fd < 0) {
perror("open");
exit(1);
}
sprintf(buf, "%d", i);
if (write(fd, buf, strlen(buf)) != strlen(buf)) {
perror("write");
exit(1);
}
close(fd);
}
void set_led(int on)
{
write_int("/sys/class/leds/hp::hddprotect/brightness", on);
}
void protect(int seconds)
{
write_int("/sys/block/sda/device/unload_heads", seconds*1000);
}
int on_ac(void)
{
// /sys/class/power_supply/AC0/online
}
int lid_open(void)
{
// /proc/acpi/button/lid/LID/state
}
void ignore_me(void)
{
protect(0);
set_led(0);
}
int main(int argc, char* argv[])
{
int fd, ret;
fd = open("/dev/freefall", O_RDONLY);
if (fd < 0) {
perror("open");
return EXIT_FAILURE;
}
signal(SIGALRM, ignore_me);
for (;;) {
unsigned char count;
ret = read(fd, &count, sizeof(count));
alarm(0);
if ((ret == -1) && (errno == EINTR)) {
/* Alarm expired, time to unpark the heads */
continue;
}
if (ret != sizeof(count)) {
perror("read");
break;
}
protect(21);
set_led(1);
if (1 || on_ac() || lid_open()) {
alarm(2);
} else {
alarm(20);
}
}
close(fd);
return EXIT_SUCCESS;
}

View File

@ -33,6 +33,14 @@ rate - reports the sampling rate of the accelerometer device in HZ
This driver also provides an absolute input class device, allowing
the laptop to act as a pinball machine-esque joystick.
Another feature of the driver is misc device called "freefall" that
acts similar to /dev/rtc and reacts on free-fall interrupts received
from the device. It supports blocking operations, poll/select and
fasync operation modes. You must read 1 bytes from the device. The
result is number of free-fall interrupts since the last successful
read (or 255 if number of interrupts would not fit).
Axes orientation
----------------

View File

@ -1905,10 +1905,10 @@ W: http://gigaset307x.sourceforge.net/
S: Maintained
HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
P: Robert Love
M: rlove@rlove.org
M: linux-kernel@vger.kernel.org
W: http://www.kernel.org/pub/linux/kernel/people/rml/hdaps/
P: Frank Seidel
M: frank@f-seidel.de
L: lm-sensors@lm-sensors.org
W: http://www.kernel.org/pub/linux/kernel/people/fseidel/hdaps/
S: Maintained
GSPCA FINEPIX SUBDRIVER
@ -2001,7 +2001,7 @@ S: Maintained
HIBERNATION (aka Software Suspend, aka swsusp)
P: Pavel Machek
M: pavel@suse.cz
M: pavel@ucw.cz
P: Rafael J. Wysocki
M: rjw@sisk.pl
L: linux-pm@lists.linux-foundation.org
@ -4178,7 +4178,7 @@ SUSPEND TO RAM
P: Len Brown
M: len.brown@intel.com
P: Pavel Machek
M: pavel@suse.cz
M: pavel@ucw.cz
P: Rafael J. Wysocki
M: rjw@sisk.pl
L: linux-pm@lists.linux-foundation.org
@ -4930,11 +4930,11 @@ L: zd1211-devs@lists.sourceforge.net (subscribers-only)
S: Maintained
ZR36067 VIDEO FOR LINUX DRIVER
P: Ronald Bultje
M: rbultje@ronald.bitfreak.net
L: mjpeg-users@lists.sourceforge.net
L: linux-media@vger.kernel.org
W: http://mjpeg.sourceforge.net/driver-zoran/
S: Maintained
T: Mercurial http://linuxtv.org/hg/v4l-dvb
S: Odd Fixes
ZS DECSTATION Z85C30 SERIAL DRIVER
P: Maciej W. Rozycki

View File

@ -389,6 +389,7 @@ PHONY += outputmakefile
# output directory.
outputmakefile:
ifneq ($(KBUILD_SRC),)
$(Q)ln -fsn $(srctree) source
$(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
$(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
endif
@ -946,7 +947,6 @@ ifneq ($(KBUILD_SRC),)
mkdir -p include2; \
ln -fsn $(srctree)/include/asm-$(SRCARCH) include2/asm; \
fi
ln -fsn $(srctree) source
endif
# prepare2 creates a makefile if using a separate output directory

View File

@ -93,8 +93,8 @@ common_shutdown_1(void *generic_ptr)
if (cpuid != boot_cpuid) {
flags |= 0x00040000UL; /* "remain halted" */
*pflags = flags;
cpu_clear(cpuid, cpu_present_map);
cpu_clear(cpuid, cpu_possible_map);
set_cpu_present(cpuid, false);
set_cpu_possible(cpuid, false);
halt();
}
#endif
@ -120,8 +120,8 @@ common_shutdown_1(void *generic_ptr)
#ifdef CONFIG_SMP
/* Wait for the secondaries to halt. */
cpu_clear(boot_cpuid, cpu_present_map);
cpu_clear(boot_cpuid, cpu_possible_map);
set_cpu_present(boot_cpuid, false);
set_cpu_possible(boot_cpuid, false);
while (cpus_weight(cpu_present_map))
barrier();
#endif

View File

@ -120,12 +120,12 @@ void __cpuinit
smp_callin(void)
{
int cpuid = hard_smp_processor_id();
cpumask_t mask = cpu_online_map;
if (cpu_test_and_set(cpuid, mask)) {
if (cpu_online(cpuid)) {
printk("??, cpu 0x%x already present??\n", cpuid);
BUG();
}
set_cpu_online(cpuid, true);
/* Turn on machine checks. */
wrmces(7);
@ -436,8 +436,8 @@ setup_smp(void)
((char *)cpubase + i*hwrpb->processor_size);
if ((cpu->flags & 0x1cc) == 0x1cc) {
smp_num_probed++;
cpu_set(i, cpu_possible_map);
cpu_set(i, cpu_present_map);
set_cpu_possible(i, true);
set_cpu_present(i, true);
cpu->pal_revision = boot_cpu_palrev;
}
@ -470,8 +470,8 @@ smp_prepare_cpus(unsigned int max_cpus)
/* Nothing to do on a UP box, or when told not to. */
if (smp_num_probed == 1 || max_cpus == 0) {
cpu_possible_map = cpumask_of_cpu(boot_cpuid);
cpu_present_map = cpumask_of_cpu(boot_cpuid);
init_cpu_possible(cpumask_of(boot_cpuid));
init_cpu_present(cpumask_of(boot_cpuid));
printk(KERN_INFO "SMP mode deactivated.\n");
return;
}

View File

@ -25,6 +25,10 @@
#include <linux/ioctl.h>
/* Select x86 specific features in <linux/kvm.h> */
#define __KVM_HAVE_IOAPIC
#define __KVM_HAVE_DEVICE_ASSIGNMENT
/* Architectural interrupt line count. */
#define KVM_NR_INTERRUPTS 256

View File

@ -31,10 +31,6 @@ static inline int pfn_to_nid(unsigned long pfn)
#endif
}
#ifdef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
extern int early_pfn_to_nid(unsigned long pfn);
#endif
#ifdef CONFIG_IA64_DIG /* DIG systems are small */
# define MAX_PHYSNODE_ID 8
# define NR_NODE_MEMBLKS (MAX_NUMNODES * 8)

View File

@ -1337,6 +1337,10 @@ static void kvm_release_vm_pages(struct kvm *kvm)
}
}
void kvm_arch_sync_events(struct kvm *kvm)
{
}
void kvm_arch_destroy_vm(struct kvm *kvm)
{
kvm_iommu_unmap_guest(kvm);

View File

@ -455,13 +455,18 @@ fpswa_ret_t vmm_fp_emulate(int fp_fault, void *bundle, unsigned long *ipsr,
if (!vmm_fpswa_interface)
return (fpswa_ret_t) {-1, 0, 0, 0};
/*
* Just let fpswa driver to use hardware fp registers.
* No fp register is valid in memory.
*/
memset(&fp_state, 0, sizeof(fp_state_t));
/*
* compute fp_state. only FP registers f6 - f11 are used by the
* vmm, so set those bits in the mask and set the low volatile
* pointer to point to these registers.
*/
fp_state.bitmask_low64 = 0xfc0; /* bit6..bit11 */
fp_state.fp_state_low_volatile = (fp_state_low_volatile_t *) &regs->f6;
/*
* unsigned long (*EFI_FPSWA) (
* unsigned long trap_type,
* void *Bundle,
@ -545,10 +550,6 @@ void reflect_interruption(u64 ifa, u64 isr, u64 iim,
status = vmm_handle_fpu_swa(0, regs, isr);
if (!status)
return ;
else if (-EAGAIN == status) {
vcpu_decrement_iip(vcpu);
return ;
}
break;
}

View File

@ -58,7 +58,7 @@ paddr_to_nid(unsigned long paddr)
* SPARSEMEM to allocate the SPARSEMEM sectionmap on the NUMA node where
* the section resides.
*/
int early_pfn_to_nid(unsigned long pfn)
int __meminit __early_pfn_to_nid(unsigned long pfn)
{
int i, section = pfn >> PFN_SECTION_SHIFT, ssec, esec;
@ -70,7 +70,7 @@ int early_pfn_to_nid(unsigned long pfn)
return node_memblk[i].nid;
}
return 0;
return -1;
}
#ifdef CONFIG_MEMORY_HOTPLUG

View File

@ -60,7 +60,7 @@
/* It should be preserving the high 48 bits and then specifically */
/* preserving _PAGE_SECONDARY | _PAGE_GROUP_IX */
#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | \
_PAGE_HPTEFLAGS)
_PAGE_HPTEFLAGS | _PAGE_SPECIAL)
/* Bits to mask out from a PMD to get to the PTE page */
#define PMD_MASKED_BITS 0

View File

@ -114,7 +114,7 @@ static inline struct subpage_prot_table *pgd_subpage_prot(pgd_t *pgd)
* pgprot changes
*/
#define _PAGE_CHG_MASK (PTE_RPN_MASK | _PAGE_HPTEFLAGS | _PAGE_DIRTY | \
_PAGE_ACCESSED)
_PAGE_ACCESSED | _PAGE_SPECIAL)
/* Bits to mask out from a PMD to get to the PTE page */
#define PMD_MASKED_BITS 0x1ff

View File

@ -429,7 +429,8 @@ extern int icache_44x_need_flush;
#define PMD_PAGE_SIZE(pmd) bad_call_to_PMD_PAGE_SIZE()
#endif
#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | \
_PAGE_SPECIAL)
#define PAGE_PROT_BITS (_PAGE_GUARDED | _PAGE_COHERENT | _PAGE_NO_CACHE | \

View File

@ -646,11 +646,16 @@ static int emulate_vsx(unsigned char __user *addr, unsigned int reg,
unsigned int areg, struct pt_regs *regs,
unsigned int flags, unsigned int length)
{
char *ptr = (char *) &current->thread.TS_FPR(reg);
char *ptr;
int ret = 0;
flush_vsx_to_thread(current);
if (reg < 32)
ptr = (char *) &current->thread.TS_FPR(reg);
else
ptr = (char *) &current->thread.vr[reg - 32];
if (flags & ST)
ret = __copy_to_user(addr, ptr, length);
else {

View File

@ -125,6 +125,10 @@ static void kvmppc_free_vcpus(struct kvm *kvm)
}
}
void kvm_arch_sync_events(struct kvm *kvm)
{
}
void kvm_arch_destroy_vm(struct kvm *kvm)
{
kvmppc_free_vcpus(kvm);

View File

@ -19,6 +19,7 @@
#include <linux/notifier.h>
#include <linux/lmb.h>
#include <linux/of.h>
#include <linux/pfn.h>
#include <asm/sparsemem.h>
#include <asm/prom.h>
#include <asm/system.h>
@ -882,7 +883,7 @@ static void mark_reserved_regions_for_nid(int nid)
unsigned long physbase = lmb.reserved.region[i].base;
unsigned long size = lmb.reserved.region[i].size;
unsigned long start_pfn = physbase >> PAGE_SHIFT;
unsigned long end_pfn = ((physbase + size) >> PAGE_SHIFT);
unsigned long end_pfn = PFN_UP(physbase + size);
struct node_active_region node_ar;
unsigned long node_end_pfn = node->node_start_pfn +
node->node_spanned_pages;
@ -908,7 +909,7 @@ static void mark_reserved_regions_for_nid(int nid)
*/
if (end_pfn > node_ar.end_pfn)
reserve_size = (node_ar.end_pfn << PAGE_SHIFT)
- (start_pfn << PAGE_SHIFT);
- physbase;
/*
* Only worry about *this* node, others may not
* yet have valid NODE_DATA().

View File

@ -328,7 +328,7 @@ static int __init ps3_mm_add_memory(void)
return result;
}
core_initcall(ps3_mm_add_memory);
device_initcall(ps3_mm_add_memory);
/*============================================================================*/
/* dma routines */

View File

@ -212,6 +212,10 @@ static void kvm_free_vcpus(struct kvm *kvm)
}
}
void kvm_arch_sync_events(struct kvm *kvm)
{
}
void kvm_arch_destroy_vm(struct kvm *kvm)
{
kvm_free_vcpus(kvm);

View File

@ -9,6 +9,13 @@
#include <linux/types.h>
#include <linux/ioctl.h>
/* Select x86 specific features in <linux/kvm.h> */
#define __KVM_HAVE_PIT
#define __KVM_HAVE_IOAPIC
#define __KVM_HAVE_DEVICE_ASSIGNMENT
#define __KVM_HAVE_MSI
#define __KVM_HAVE_USER_NMI
/* Architectural interrupt line count. */
#define KVM_NR_INTERRUPTS 256

View File

@ -32,8 +32,6 @@ static inline void get_memcfg_numa(void)
get_memcfg_numa_flat();
}
extern int early_pfn_to_nid(unsigned long pfn);
extern void resume_map_numa_kva(pgd_t *pgd);
#else /* !CONFIG_NUMA */

View File

@ -40,8 +40,6 @@ static inline __attribute__((pure)) int phys_to_nid(unsigned long addr)
#define node_end_pfn(nid) (NODE_DATA(nid)->node_start_pfn + \
NODE_DATA(nid)->node_spanned_pages)
extern int early_pfn_to_nid(unsigned long pfn);
#ifdef CONFIG_NUMA_EMU
#define FAKE_NODE_MIN_SIZE (64 * 1024 * 1024)
#define FAKE_NODE_MIN_HASH_MASK (~(FAKE_NODE_MIN_SIZE - 1UL))

View File

@ -57,7 +57,6 @@ typedef struct { pgdval_t pgd; } pgd_t;
typedef struct { pgprotval_t pgprot; } pgprot_t;
extern int page_is_ram(unsigned long pagenr);
extern int pagerange_is_ram(unsigned long start, unsigned long end);
extern int devmem_is_allowed(unsigned long pagenr);
extern void map_devmem(unsigned long pfn, unsigned long size,
pgprot_t vma_prot);

View File

@ -1352,14 +1352,7 @@ static inline void arch_leave_lazy_cpu_mode(void)
PVOP_VCALL0(pv_cpu_ops.lazy_mode.leave);
}
static inline void arch_flush_lazy_cpu_mode(void)
{
if (unlikely(paravirt_get_lazy_mode() == PARAVIRT_LAZY_CPU)) {
arch_leave_lazy_cpu_mode();
arch_enter_lazy_cpu_mode();
}
}
void arch_flush_lazy_cpu_mode(void);
#define __HAVE_ARCH_ENTER_LAZY_MMU_MODE
static inline void arch_enter_lazy_mmu_mode(void)
@ -1372,13 +1365,7 @@ static inline void arch_leave_lazy_mmu_mode(void)
PVOP_VCALL0(pv_mmu_ops.lazy_mode.leave);
}
static inline void arch_flush_lazy_mmu_mode(void)
{
if (unlikely(paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU)) {
arch_leave_lazy_mmu_mode();
arch_enter_lazy_mmu_mode();
}
}
void arch_flush_lazy_mmu_mode(void);
static inline void __set_fixmap(unsigned /* enum fixed_addresses */ idx,
unsigned long phys, pgprot_t flags)

View File

@ -1157,8 +1157,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
data->cpu = pol->cpu;
data->currpstate = HW_PSTATE_INVALID;
rc = powernow_k8_cpu_init_acpi(data);
if (rc) {
if (powernow_k8_cpu_init_acpi(data)) {
/*
* Use the PSB BIOS structure. This is only availabe on
* an UP version, and is deprecated by AMD.
@ -1176,17 +1175,20 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
"ACPI maintainers and complain to your BIOS "
"vendor.\n");
#endif
goto err_out;
kfree(data);
return -ENODEV;
}
if (pol->cpu != 0) {
printk(KERN_ERR FW_BUG PFX "No ACPI _PSS objects for "
"CPU other than CPU0. Complain to your BIOS "
"vendor.\n");
goto err_out;
kfree(data);
return -ENODEV;
}
rc = find_psb_table(data);
if (rc) {
goto err_out;
kfree(data);
return -ENODEV;
}
/* Take a crude guess here.
* That guess was in microseconds, so multiply with 1000 */

View File

@ -269,6 +269,8 @@ static void hpet_set_mode(enum clock_event_mode mode,
now = hpet_readl(HPET_COUNTER);
cmp = now + (unsigned long) delta;
cfg = hpet_readl(HPET_Tn_CFG(timer));
/* Make sure we use edge triggered interrupts */
cfg &= ~HPET_TN_LEVEL;
cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC |
HPET_TN_SETVAL | HPET_TN_32BIT;
hpet_writel(cfg, HPET_Tn_CFG(timer));

View File

@ -203,7 +203,7 @@ static void __init platform_detect(void)
static void __init platform_detect(void)
{
/* stopgap until OFW support is added to the kernel */
olpc_platform_info.boardrev = 0xc2;
olpc_platform_info.boardrev = olpc_board(0xc2);
}
#endif

View File

@ -268,6 +268,32 @@ enum paravirt_lazy_mode paravirt_get_lazy_mode(void)
return __get_cpu_var(paravirt_lazy_mode);
}
void arch_flush_lazy_mmu_mode(void)
{
preempt_disable();
if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU) {
WARN_ON(preempt_count() == 1);
arch_leave_lazy_mmu_mode();
arch_enter_lazy_mmu_mode();
}
preempt_enable();
}
void arch_flush_lazy_cpu_mode(void)
{
preempt_disable();
if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_CPU) {
WARN_ON(preempt_count() == 1);
arch_leave_lazy_cpu_mode();
arch_enter_lazy_cpu_mode();
}
preempt_enable();
}
struct pv_info pv_info = {
.name = "bare hardware",
.paravirt_enabled = 0,

View File

@ -810,12 +810,16 @@ static void ptrace_bts_untrace(struct task_struct *child)
static void ptrace_bts_detach(struct task_struct *child)
{
if (unlikely(child->bts)) {
ds_release_bts(child->bts);
child->bts = NULL;
ptrace_bts_free_buffer(child);
}
/*
* Ptrace_detach() races with ptrace_untrace() in case
* the child dies and is reaped by another thread.
*
* We only do the memory accounting at this point and
* leave the buffer deallocation and the bts tracer
* release to ptrace_bts_untrace() which will be called
* later on with tasklist_lock held.
*/
release_locked_buffer(child->bts_buffer, child->bts_size);
}
#else
static inline void ptrace_bts_fork(struct task_struct *tsk) {}

View File

@ -99,6 +99,12 @@ static inline void preempt_conditional_sti(struct pt_regs *regs)
local_irq_enable();
}
static inline void conditional_cli(struct pt_regs *regs)
{
if (regs->flags & X86_EFLAGS_IF)
local_irq_disable();
}
static inline void preempt_conditional_cli(struct pt_regs *regs)
{
if (regs->flags & X86_EFLAGS_IF)
@ -626,8 +632,10 @@ clear_dr7:
#ifdef CONFIG_X86_32
debug_vm86:
/* reenable preemption: handle_vm86_trap() might sleep */
dec_preempt_count();
handle_vm86_trap((struct kernel_vm86_regs *) regs, error_code, 1);
preempt_conditional_cli(regs);
conditional_cli(regs);
return;
#endif

View File

@ -207,7 +207,7 @@ static int __pit_timer_fn(struct kvm_kpit_state *ps)
hrtimer_add_expires_ns(&pt->timer, pt->period);
pt->scheduled = hrtimer_get_expires_ns(&pt->timer);
if (pt->period)
ps->channels[0].count_load_time = hrtimer_get_expires(&pt->timer);
ps->channels[0].count_load_time = ktime_get();
return (pt->period == 0 ? 0 : 1);
}

View File

@ -87,13 +87,6 @@ void kvm_inject_pending_timer_irqs(struct kvm_vcpu *vcpu)
}
EXPORT_SYMBOL_GPL(kvm_inject_pending_timer_irqs);
void kvm_timer_intr_post(struct kvm_vcpu *vcpu, int vec)
{
kvm_apic_timer_intr_post(vcpu, vec);
/* TODO: PIT, RTC etc. */
}
EXPORT_SYMBOL_GPL(kvm_timer_intr_post);
void __kvm_migrate_timers(struct kvm_vcpu *vcpu)
{
__kvm_migrate_apic_timer(vcpu);

View File

@ -89,7 +89,6 @@ static inline int irqchip_in_kernel(struct kvm *kvm)
void kvm_pic_reset(struct kvm_kpic_state *s);
void kvm_timer_intr_post(struct kvm_vcpu *vcpu, int vec);
void kvm_inject_pending_timer_irqs(struct kvm_vcpu *vcpu);
void kvm_inject_apic_timer_irqs(struct kvm_vcpu *vcpu);
void kvm_apic_nmi_wd_deliver(struct kvm_vcpu *vcpu);

View File

@ -35,6 +35,12 @@
#include "kvm_cache_regs.h"
#include "irq.h"
#ifndef CONFIG_X86_64
#define mod_64(x, y) ((x) - (y) * div64_u64(x, y))
#else
#define mod_64(x, y) ((x) % (y))
#endif
#define PRId64 "d"
#define PRIx64 "llx"
#define PRIu64 "u"
@ -511,52 +517,22 @@ static void apic_send_ipi(struct kvm_lapic *apic)
static u32 apic_get_tmcct(struct kvm_lapic *apic)
{
u64 counter_passed;
ktime_t passed, now;
ktime_t remaining;
s64 ns;
u32 tmcct;
ASSERT(apic != NULL);
now = apic->timer.dev.base->get_time();
tmcct = apic_get_reg(apic, APIC_TMICT);
/* if initial count is 0, current count should also be 0 */
if (tmcct == 0)
if (apic_get_reg(apic, APIC_TMICT) == 0)
return 0;
if (unlikely(ktime_to_ns(now) <=
ktime_to_ns(apic->timer.last_update))) {
/* Wrap around */
passed = ktime_add(( {
(ktime_t) {
.tv64 = KTIME_MAX -
(apic->timer.last_update).tv64}; }
), now);
apic_debug("time elapsed\n");
} else
passed = ktime_sub(now, apic->timer.last_update);
remaining = hrtimer_expires_remaining(&apic->timer.dev);
if (ktime_to_ns(remaining) < 0)
remaining = ktime_set(0, 0);
counter_passed = div64_u64(ktime_to_ns(passed),
(APIC_BUS_CYCLE_NS * apic->timer.divide_count));
if (counter_passed > tmcct) {
if (unlikely(!apic_lvtt_period(apic))) {
/* one-shot timers stick at 0 until reset */
tmcct = 0;
} else {
/*
* periodic timers reset to APIC_TMICT when they
* hit 0. The while loop simulates this happening N
* times. (counter_passed %= tmcct) would also work,
* but might be slower or not work on 32-bit??
*/
while (counter_passed > tmcct)
counter_passed -= tmcct;
tmcct -= counter_passed;
}
} else {
tmcct -= counter_passed;
}
ns = mod_64(ktime_to_ns(remaining), apic->timer.period);
tmcct = div64_u64(ns, (APIC_BUS_CYCLE_NS * apic->timer.divide_count));
return tmcct;
}
@ -653,8 +629,6 @@ static void start_apic_timer(struct kvm_lapic *apic)
{
ktime_t now = apic->timer.dev.base->get_time();
apic->timer.last_update = now;
apic->timer.period = apic_get_reg(apic, APIC_TMICT) *
APIC_BUS_CYCLE_NS * apic->timer.divide_count;
atomic_set(&apic->timer.pending, 0);
@ -1110,16 +1084,6 @@ void kvm_inject_apic_timer_irqs(struct kvm_vcpu *vcpu)
}
}
void kvm_apic_timer_intr_post(struct kvm_vcpu *vcpu, int vec)
{
struct kvm_lapic *apic = vcpu->arch.apic;
if (apic && apic_lvt_vector(apic, APIC_LVTT) == vec)
apic->timer.last_update = ktime_add_ns(
apic->timer.last_update,
apic->timer.period);
}
int kvm_get_apic_interrupt(struct kvm_vcpu *vcpu)
{
int vector = kvm_apic_has_interrupt(vcpu);

View File

@ -12,7 +12,6 @@ struct kvm_lapic {
atomic_t pending;
s64 period; /* unit: ns */
u32 divide_count;
ktime_t last_update;
struct hrtimer dev;
} timer;
struct kvm_vcpu *vcpu;
@ -42,7 +41,6 @@ void kvm_set_apic_base(struct kvm_vcpu *vcpu, u64 data);
void kvm_apic_post_state_restore(struct kvm_vcpu *vcpu);
int kvm_lapic_enabled(struct kvm_vcpu *vcpu);
int kvm_lapic_find_highest_irr(struct kvm_vcpu *vcpu);
void kvm_apic_timer_intr_post(struct kvm_vcpu *vcpu, int vec);
void kvm_lapic_set_vapic_addr(struct kvm_vcpu *vcpu, gpa_t vapic_addr);
void kvm_lapic_sync_from_vapic(struct kvm_vcpu *vcpu);

View File

@ -1698,8 +1698,13 @@ static int set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
if (largepage)
spte |= PT_PAGE_SIZE_MASK;
if (mt_mask) {
mt_mask = get_memory_type(vcpu, gfn) <<
kvm_x86_ops->get_mt_mask_shift();
if (!kvm_is_mmio_pfn(pfn)) {
mt_mask = get_memory_type(vcpu, gfn) <<
kvm_x86_ops->get_mt_mask_shift();
mt_mask |= VMX_EPT_IGMT_BIT;
} else
mt_mask = MTRR_TYPE_UNCACHABLE <<
kvm_x86_ops->get_mt_mask_shift();
spte |= mt_mask;
}

View File

@ -1600,7 +1600,6 @@ static void svm_intr_assist(struct kvm_vcpu *vcpu)
/* Okay, we can deliver the interrupt: grab it and update PIC state. */
intr_vector = kvm_cpu_get_interrupt(vcpu);
svm_inject_irq(svm, intr_vector);
kvm_timer_intr_post(vcpu, intr_vector);
out:
update_cr8_intercept(vcpu);
}

View File

@ -903,6 +903,7 @@ static int vmx_get_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata)
data = vmcs_readl(GUEST_SYSENTER_ESP);
break;
default:
vmx_load_host_state(to_vmx(vcpu));
msr = find_msr_entry(to_vmx(vcpu), msr_index);
if (msr) {
data = msr->data;
@ -3285,7 +3286,6 @@ static void vmx_intr_assist(struct kvm_vcpu *vcpu)
}
if (vcpu->arch.interrupt.pending) {
vmx_inject_irq(vcpu, vcpu->arch.interrupt.nr);
kvm_timer_intr_post(vcpu, vcpu->arch.interrupt.nr);
if (kvm_cpu_has_interrupt(vcpu))
enable_irq_window(vcpu);
}
@ -3687,8 +3687,7 @@ static int __init vmx_init(void)
if (vm_need_ept()) {
bypass_guest_pf = 0;
kvm_mmu_set_base_ptes(VMX_EPT_READABLE_MASK |
VMX_EPT_WRITABLE_MASK |
VMX_EPT_IGMT_BIT);
VMX_EPT_WRITABLE_MASK);
kvm_mmu_set_mask_ptes(0ull, 0ull, 0ull, 0ull,
VMX_EPT_EXECUTABLE_MASK,
VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT);

View File

@ -967,7 +967,6 @@ int kvm_dev_ioctl_check_extension(long ext)
case KVM_CAP_MMU_SHADOW_CACHE_CONTROL:
case KVM_CAP_SET_TSS_ADDR:
case KVM_CAP_EXT_CPUID:
case KVM_CAP_CLOCKSOURCE:
case KVM_CAP_PIT:
case KVM_CAP_NOP_IO_DELAY:
case KVM_CAP_MP_STATE:
@ -992,6 +991,9 @@ int kvm_dev_ioctl_check_extension(long ext)
case KVM_CAP_IOMMU:
r = iommu_found();
break;
case KVM_CAP_CLOCKSOURCE:
r = boot_cpu_has(X86_FEATURE_CONSTANT_TSC);
break;
default:
r = 0;
break;
@ -4127,9 +4129,13 @@ static void kvm_free_vcpus(struct kvm *kvm)
}
void kvm_arch_destroy_vm(struct kvm *kvm)
void kvm_arch_sync_events(struct kvm *kvm)
{
kvm_free_all_assigned_devices(kvm);
}
void kvm_arch_destroy_vm(struct kvm *kvm)
{
kvm_iommu_unmap_guest(kvm);
kvm_free_pit(kvm);
kfree(kvm->arch.vpic);

View File

@ -134,25 +134,6 @@ int page_is_ram(unsigned long pagenr)
return 0;
}
int pagerange_is_ram(unsigned long start, unsigned long end)
{
int ram_page = 0, not_rampage = 0;
unsigned long page_nr;
for (page_nr = (start >> PAGE_SHIFT); page_nr < (end >> PAGE_SHIFT);
++page_nr) {
if (page_is_ram(page_nr))
ram_page = 1;
else
not_rampage = 1;
if (ram_page == not_rampage)
return -1;
}
return ram_page;
}
/*
* Fix up the linear direct mapping of the kernel to avoid cache attribute
* conflicts.

View File

@ -145,7 +145,7 @@ int __init compute_hash_shift(struct bootnode *nodes, int numnodes,
return shift;
}
int early_pfn_to_nid(unsigned long pfn)
int __meminit __early_pfn_to_nid(unsigned long pfn)
{
return phys_to_nid(pfn << PAGE_SHIFT);
}

View File

@ -575,7 +575,6 @@ static int __change_page_attr(struct cpa_data *cpa, int primary)
address = cpa->vaddr[cpa->curpage];
else
address = *cpa->vaddr;
repeat:
kpte = lookup_address(address, &level);
if (!kpte)
@ -812,6 +811,13 @@ static int change_page_attr_set_clr(unsigned long *addr, int numpages,
vm_unmap_aliases();
/*
* If we're called with lazy mmu updates enabled, the
* in-memory pte state may be stale. Flush pending updates to
* bring them up to date.
*/
arch_flush_lazy_mmu_mode();
cpa.vaddr = addr;
cpa.numpages = numpages;
cpa.mask_set = mask_set;
@ -854,6 +860,13 @@ static int change_page_attr_set_clr(unsigned long *addr, int numpages,
} else
cpa_flush_all(cache);
/*
* If we've been called with lazy mmu updates enabled, then
* make sure that everything gets flushed out before we
* return.
*/
arch_flush_lazy_mmu_mode();
out:
return ret;
}

View File

@ -211,6 +211,33 @@ chk_conflict(struct memtype *new, struct memtype *entry, unsigned long *type)
static struct memtype *cached_entry;
static u64 cached_start;
static int pat_pagerange_is_ram(unsigned long start, unsigned long end)
{
int ram_page = 0, not_rampage = 0;
unsigned long page_nr;
for (page_nr = (start >> PAGE_SHIFT); page_nr < (end >> PAGE_SHIFT);
++page_nr) {
/*
* For legacy reasons, physical address range in the legacy ISA
* region is tracked as non-RAM. This will allow users of
* /dev/mem to map portions of legacy ISA region, even when
* some of those portions are listed(or not even listed) with
* different e820 types(RAM/reserved/..)
*/
if (page_nr >= (ISA_END_ADDRESS >> PAGE_SHIFT) &&
page_is_ram(page_nr))
ram_page = 1;
else
not_rampage = 1;
if (ram_page == not_rampage)
return -1;
}
return ram_page;
}
/*
* For RAM pages, mark the pages as non WB memory type using
* PageNonWB (PG_arch_1). We allow only one set_memory_uc() or
@ -336,20 +363,12 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
if (new_type)
*new_type = actual_type;
/*
* For legacy reasons, some parts of the physical address range in the
* legacy 1MB region is treated as non-RAM (even when listed as RAM in
* the e820 tables). So we will track the memory attributes of this
* legacy 1MB region using the linear memtype_list always.
*/
if (end >= ISA_END_ADDRESS) {
is_range_ram = pagerange_is_ram(start, end);
if (is_range_ram == 1)
return reserve_ram_pages_type(start, end, req_type,
new_type);
else if (is_range_ram < 0)
return -EINVAL;
}
is_range_ram = pat_pagerange_is_ram(start, end);
if (is_range_ram == 1)
return reserve_ram_pages_type(start, end, req_type,
new_type);
else if (is_range_ram < 0)
return -EINVAL;
new = kmalloc(sizeof(struct memtype), GFP_KERNEL);
if (!new)
@ -446,19 +465,11 @@ int free_memtype(u64 start, u64 end)
if (is_ISA_range(start, end - 1))
return 0;
/*
* For legacy reasons, some parts of the physical address range in the
* legacy 1MB region is treated as non-RAM (even when listed as RAM in
* the e820 tables). So we will track the memory attributes of this
* legacy 1MB region using the linear memtype_list always.
*/
if (end >= ISA_END_ADDRESS) {
is_range_ram = pagerange_is_ram(start, end);
if (is_range_ram == 1)
return free_ram_pages_type(start, end);
else if (is_range_ram < 0)
return -EINVAL;
}
is_range_ram = pat_pagerange_is_ram(start, end);
if (is_range_ram == 1)
return free_ram_pages_type(start, end);
else if (is_range_ram < 0)
return -EINVAL;
spin_lock(&memtype_lock);
list_for_each_entry(entry, &memtype_list, nd) {
@ -626,17 +637,13 @@ static int reserve_pfn_range(u64 paddr, unsigned long size, pgprot_t *vma_prot,
unsigned long flags;
unsigned long want_flags = (pgprot_val(*vma_prot) & _PAGE_CACHE_MASK);
is_ram = pagerange_is_ram(paddr, paddr + size);
is_ram = pat_pagerange_is_ram(paddr, paddr + size);
if (is_ram != 0) {
/*
* For mapping RAM pages, drivers need to call
* set_memory_[uc|wc|wb] directly, for reserve and free, before
* setting up the PTE.
*/
WARN_ON_ONCE(1);
return 0;
}
/*
* reserve_pfn_range() doesn't support RAM pages.
*/
if (is_ram != 0)
return -EINVAL;
ret = reserve_memtype(paddr, paddr + size, want_flags, &flags);
if (ret)
@ -693,7 +700,7 @@ static void free_pfn_range(u64 paddr, unsigned long size)
{
int is_ram;
is_ram = pagerange_is_ram(paddr, paddr + size);
is_ram = pat_pagerange_is_ram(paddr, paddr + size);
if (is_ram == 0)
free_memtype(paddr, paddr + size);
}

View File

@ -209,12 +209,19 @@ void blk_abort_queue(struct request_queue *q)
{
unsigned long flags;
struct request *rq, *tmp;
LIST_HEAD(list);
spin_lock_irqsave(q->queue_lock, flags);
elv_abort_queue(q);
list_for_each_entry_safe(rq, tmp, &q->timeout_list, timeout_list)
/*
* Splice entries to local list, to avoid deadlocking if entries
* get readded to the timeout list by error handling
*/
list_splice_init(&q->timeout_list, &list);
list_for_each_entry_safe(rq, tmp, &list, timeout_list)
blk_abort_request(rq);
spin_unlock_irqrestore(q->queue_lock, flags);

View File

@ -244,7 +244,8 @@ bsg_validate_sgv4_hdr(struct request_queue *q, struct sg_io_v4 *hdr, int *rw)
* map sg_io_v4 to a request.
*/
static struct request *
bsg_map_hdr(struct bsg_device *bd, struct sg_io_v4 *hdr, fmode_t has_write_perm)
bsg_map_hdr(struct bsg_device *bd, struct sg_io_v4 *hdr, fmode_t has_write_perm,
u8 *sense)
{
struct request_queue *q = bd->queue;
struct request *rq, *next_rq = NULL;
@ -306,6 +307,10 @@ bsg_map_hdr(struct bsg_device *bd, struct sg_io_v4 *hdr, fmode_t has_write_perm)
if (ret)
goto out;
}
rq->sense = sense;
rq->sense_len = 0;
return rq;
out:
if (rq->cmd != rq->__cmd)
@ -348,9 +353,6 @@ static void bsg_rq_end_io(struct request *rq, int uptodate)
static void bsg_add_command(struct bsg_device *bd, struct request_queue *q,
struct bsg_command *bc, struct request *rq)
{
rq->sense = bc->sense;
rq->sense_len = 0;
/*
* add bc command to busy queue and submit rq for io
*/
@ -419,7 +421,7 @@ static int blk_complete_sgv4_hdr_rq(struct request *rq, struct sg_io_v4 *hdr,
{
int ret = 0;
dprintk("rq %p bio %p %u\n", rq, bio, rq->errors);
dprintk("rq %p bio %p 0x%x\n", rq, bio, rq->errors);
/*
* fill in all the output members
*/
@ -635,7 +637,7 @@ static int __bsg_write(struct bsg_device *bd, const char __user *buf,
/*
* get a request, fill in the blanks, and add to request queue
*/
rq = bsg_map_hdr(bd, &bc->hdr, has_write_perm);
rq = bsg_map_hdr(bd, &bc->hdr, has_write_perm, bc->sense);
if (IS_ERR(rq)) {
ret = PTR_ERR(rq);
rq = NULL;
@ -922,11 +924,12 @@ static long bsg_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
struct request *rq;
struct bio *bio, *bidi_bio = NULL;
struct sg_io_v4 hdr;
u8 sense[SCSI_SENSE_BUFFERSIZE];
if (copy_from_user(&hdr, uarg, sizeof(hdr)))
return -EFAULT;
rq = bsg_map_hdr(bd, &hdr, file->f_mode & FMODE_WRITE);
rq = bsg_map_hdr(bd, &hdr, file->f_mode & FMODE_WRITE, sense);
if (IS_ERR(rq))
return PTR_ERR(rq);

View File

@ -1087,6 +1087,14 @@ dev_t blk_lookup_devt(const char *name, int partno)
if (strcmp(dev_name(dev), name))
continue;
if (partno < disk->minors) {
/* We need to return the right devno, even
* if the partition doesn't exist yet.
*/
devt = MKDEV(MAJOR(dev->devt),
MINOR(dev->devt) + partno);
break;
}
part = disk_get_part(disk, partno);
if (part) {
devt = part_devt(part);

View File

@ -45,7 +45,13 @@ struct priv {
static inline void setbit128_bbe(void *b, int bit)
{
__set_bit(bit ^ 0x78, b);
__set_bit(bit ^ (0x80 -
#ifdef __BIG_ENDIAN
BITS_PER_LONG
#else
BITS_PER_BYTE
#endif
), b);
}
static int setkey(struct crypto_tfm *parent, const u8 *key,

View File

@ -773,18 +773,32 @@ unsigned int ata_sff_data_xfer32(struct ata_device *dev, unsigned char *buf,
else
iowrite32_rep(data_addr, buf, words);
/* Transfer trailing bytes, if any */
if (unlikely(slop)) {
__le32 pad;
unsigned char pad[4];
/* Point buf to the tail of buffer */
buf += buflen - slop;
/*
* Use io*_rep() accessors here as well to avoid pointlessly
* swapping bytes to and fro on the big endian machines...
*/
if (rw == READ) {
pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr));
memcpy(buf + buflen - slop, &pad, slop);
if (slop < 3)
ioread16_rep(data_addr, pad, 1);
else
ioread32_rep(data_addr, pad, 1);
memcpy(buf, pad, slop);
} else {
memcpy(&pad, buf + buflen - slop, slop);
iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr);
memcpy(pad, buf, slop);
if (slop < 3)
iowrite16_rep(data_addr, pad, 1);
else
iowrite32_rep(data_addr, pad, 1);
}
words++;
}
return words << 2;
return (buflen + 1) & ~1;
}
EXPORT_SYMBOL_GPL(ata_sff_data_xfer32);

View File

@ -110,7 +110,8 @@ static const struct via_isa_bridge {
{ "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
{ "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
{ "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA },
{ "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES},
{ "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES },
{ "vt6415", PCI_DEVICE_ID_VIA_6415, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES },
{ "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
{ "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
{ "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
@ -593,6 +594,7 @@ static int via_reinit_one(struct pci_dev *pdev)
#endif
static const struct pci_device_id via[] = {
{ PCI_VDEVICE(VIA, 0x0415), },
{ PCI_VDEVICE(VIA, 0x0571), },
{ PCI_VDEVICE(VIA, 0x0581), },
{ PCI_VDEVICE(VIA, 0x1571), },

View File

@ -421,19 +421,21 @@ static struct ata_port_operations nv_generic_ops = {
.hardreset = ATA_OP_NULL,
};
/* OSDL bz3352 reports that nf2/3 controllers can't determine device
* signature reliably. Also, the following thread reports detection
* failure on cold boot with the standard debouncing timing.
/* nf2 is ripe with hardreset related problems.
*
* kernel bz#3352 reports nf2/3 controllers can't determine device
* signature reliably. The following thread reports detection failure
* on cold boot with the standard debouncing timing.
*
* http://thread.gmane.org/gmane.linux.ide/34098
*
* Debounce with hotplug timing and request follow-up SRST.
* And bz#12176 reports that hardreset simply doesn't work on nf2.
* Give up on it and just don't do hardreset.
*/
static struct ata_port_operations nv_nf2_ops = {
.inherits = &nv_common_ops,
.inherits = &nv_generic_ops,
.freeze = nv_nf2_freeze,
.thaw = nv_nf2_thaw,
.hardreset = nv_noclassify_hardreset,
};
/* For initial probing after boot and hot plugging, hardreset mostly

View File

@ -18,6 +18,7 @@
enum {
AOECMD_ATA,
AOECMD_CFG,
AOECMD_VEND_MIN = 0xf0,
AOEFL_RSP = (1<<3),
AOEFL_ERR = (1<<2),

View File

@ -142,6 +142,8 @@ aoenet_rcv(struct sk_buff *skb, struct net_device *ifp, struct packet_type *pt,
aoecmd_cfg_rsp(skb);
break;
default:
if (h->cmd >= AOECMD_VEND_MIN)
break; /* don't complain about vendor commands */
printk(KERN_INFO "aoe: unknown cmd %d\n", h->cmd);
}
exit:

View File

@ -3390,6 +3390,203 @@ static void free_hba(int i)
kfree(p);
}
/* Send a message CDB to the firmware. */
static __devinit int cciss_message(struct pci_dev *pdev, unsigned char opcode, unsigned char type)
{
typedef struct {
CommandListHeader_struct CommandHeader;
RequestBlock_struct Request;
ErrDescriptor_struct ErrorDescriptor;
} Command;
static const size_t cmd_sz = sizeof(Command) + sizeof(ErrorInfo_struct);
Command *cmd;
dma_addr_t paddr64;
uint32_t paddr32, tag;
void __iomem *vaddr;
int i, err;
vaddr = ioremap_nocache(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
if (vaddr == NULL)
return -ENOMEM;
/* The Inbound Post Queue only accepts 32-bit physical addresses for the
CCISS commands, so they must be allocated from the lower 4GiB of
memory. */
err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
if (err) {
iounmap(vaddr);
return -ENOMEM;
}
cmd = pci_alloc_consistent(pdev, cmd_sz, &paddr64);
if (cmd == NULL) {
iounmap(vaddr);
return -ENOMEM;
}
/* This must fit, because of the 32-bit consistent DMA mask. Also,
although there's no guarantee, we assume that the address is at
least 4-byte aligned (most likely, it's page-aligned). */
paddr32 = paddr64;
cmd->CommandHeader.ReplyQueue = 0;
cmd->CommandHeader.SGList = 0;
cmd->CommandHeader.SGTotal = 0;
cmd->CommandHeader.Tag.lower = paddr32;
cmd->CommandHeader.Tag.upper = 0;
memset(&cmd->CommandHeader.LUN.LunAddrBytes, 0, 8);
cmd->Request.CDBLen = 16;
cmd->Request.Type.Type = TYPE_MSG;
cmd->Request.Type.Attribute = ATTR_HEADOFQUEUE;
cmd->Request.Type.Direction = XFER_NONE;
cmd->Request.Timeout = 0; /* Don't time out */
cmd->Request.CDB[0] = opcode;
cmd->Request.CDB[1] = type;
memset(&cmd->Request.CDB[2], 0, 14); /* the rest of the CDB is reserved */
cmd->ErrorDescriptor.Addr.lower = paddr32 + sizeof(Command);
cmd->ErrorDescriptor.Addr.upper = 0;
cmd->ErrorDescriptor.Len = sizeof(ErrorInfo_struct);
writel(paddr32, vaddr + SA5_REQUEST_PORT_OFFSET);
for (i = 0; i < 10; i++) {
tag = readl(vaddr + SA5_REPLY_PORT_OFFSET);
if ((tag & ~3) == paddr32)
break;
schedule_timeout_uninterruptible(HZ);
}
iounmap(vaddr);
/* we leak the DMA buffer here ... no choice since the controller could
still complete the command. */
if (i == 10) {
printk(KERN_ERR "cciss: controller message %02x:%02x timed out\n",
opcode, type);
return -ETIMEDOUT;
}
pci_free_consistent(pdev, cmd_sz, cmd, paddr64);
if (tag & 2) {
printk(KERN_ERR "cciss: controller message %02x:%02x failed\n",
opcode, type);
return -EIO;
}
printk(KERN_INFO "cciss: controller message %02x:%02x succeeded\n",
opcode, type);
return 0;
}
#define cciss_soft_reset_controller(p) cciss_message(p, 1, 0)
#define cciss_noop(p) cciss_message(p, 3, 0)
static __devinit int cciss_reset_msi(struct pci_dev *pdev)
{
/* the #defines are stolen from drivers/pci/msi.h. */
#define msi_control_reg(base) (base + PCI_MSI_FLAGS)
#define PCI_MSIX_FLAGS_ENABLE (1 << 15)
int pos;
u16 control = 0;
pos = pci_find_capability(pdev, PCI_CAP_ID_MSI);
if (pos) {
pci_read_config_word(pdev, msi_control_reg(pos), &control);
if (control & PCI_MSI_FLAGS_ENABLE) {
printk(KERN_INFO "cciss: resetting MSI\n");
pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSI_FLAGS_ENABLE);
}
}
pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX);
if (pos) {
pci_read_config_word(pdev, msi_control_reg(pos), &control);
if (control & PCI_MSIX_FLAGS_ENABLE) {
printk(KERN_INFO "cciss: resetting MSI-X\n");
pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSIX_FLAGS_ENABLE);
}
}
return 0;
}
/* This does a hard reset of the controller using PCI power management
* states. */
static __devinit int cciss_hard_reset_controller(struct pci_dev *pdev)
{
u16 pmcsr, saved_config_space[32];
int i, pos;
printk(KERN_INFO "cciss: using PCI PM to reset controller\n");
/* This is very nearly the same thing as
pci_save_state(pci_dev);
pci_set_power_state(pci_dev, PCI_D3hot);
pci_set_power_state(pci_dev, PCI_D0);
pci_restore_state(pci_dev);
but we can't use these nice canned kernel routines on
kexec, because they also check the MSI/MSI-X state in PCI
configuration space and do the wrong thing when it is
set/cleared. Also, the pci_save/restore_state functions
violate the ordering requirements for restoring the
configuration space from the CCISS document (see the
comment below). So we roll our own .... */
for (i = 0; i < 32; i++)
pci_read_config_word(pdev, 2*i, &saved_config_space[i]);
pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
if (pos == 0) {
printk(KERN_ERR "cciss_reset_controller: PCI PM not supported\n");
return -ENODEV;
}
/* Quoting from the Open CISS Specification: "The Power
* Management Control/Status Register (CSR) controls the power
* state of the device. The normal operating state is D0,
* CSR=00h. The software off state is D3, CSR=03h. To reset
* the controller, place the interface device in D3 then to
* D0, this causes a secondary PCI reset which will reset the
* controller." */
/* enter the D3hot power management state */
pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr);
pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
pmcsr |= PCI_D3hot;
pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
schedule_timeout_uninterruptible(HZ >> 1);
/* enter the D0 power management state */
pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
pmcsr |= PCI_D0;
pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
schedule_timeout_uninterruptible(HZ >> 1);
/* Restore the PCI configuration space. The Open CISS
* Specification says, "Restore the PCI Configuration
* Registers, offsets 00h through 60h. It is important to
* restore the command register, 16-bits at offset 04h,
* last. Do not restore the configuration status register,
* 16-bits at offset 06h." Note that the offset is 2*i. */
for (i = 0; i < 32; i++) {
if (i == 2 || i == 3)
continue;
pci_write_config_word(pdev, 2*i, saved_config_space[i]);
}
wmb();
pci_write_config_word(pdev, 4, saved_config_space[2]);
return 0;
}
/*
* This is it. Find all the controllers and register them. I really hate
* stealing all these major device numbers.
@ -3404,6 +3601,24 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
int dac, return_code;
InquiryData_struct *inq_buff = NULL;
if (reset_devices) {
/* Reset the controller with a PCI power-cycle */
if (cciss_hard_reset_controller(pdev) || cciss_reset_msi(pdev))
return -ENODEV;
/* Some devices (notably the HP Smart Array 5i Controller)
need a little pause here */
schedule_timeout_uninterruptible(30*HZ);
/* Now try to get the controller to respond to a no-op */
for (i=0; i<12; i++) {
if (cciss_noop(pdev) == 0)
break;
else
printk("cciss: no-op failed%s\n", (i < 11 ? "; re-trying" : ""));
}
}
i = alloc_cciss_hba();
if (i < 0)
return -1;

View File

@ -558,6 +558,8 @@ static void process_fd_request(void);
static void recalibrate_floppy(void);
static void floppy_shutdown(unsigned long);
static int floppy_request_regions(int);
static void floppy_release_regions(int);
static int floppy_grab_irq_and_dma(void);
static void floppy_release_irq_and_dma(void);
@ -4274,8 +4276,7 @@ static int __init floppy_init(void)
FDCS->rawcmd = 2;
if (user_reset_fdc(-1, FD_RESET_ALWAYS, 0)) {
/* free ioports reserved by floppy_grab_irq_and_dma() */
release_region(FDCS->address + 2, 4);
release_region(FDCS->address + 7, 1);
floppy_release_regions(fdc);
FDCS->address = -1;
FDCS->version = FDC_NONE;
continue;
@ -4284,8 +4285,7 @@ static int __init floppy_init(void)
FDCS->version = get_fdc_version();
if (FDCS->version == FDC_NONE) {
/* free ioports reserved by floppy_grab_irq_and_dma() */
release_region(FDCS->address + 2, 4);
release_region(FDCS->address + 7, 1);
floppy_release_regions(fdc);
FDCS->address = -1;
continue;
}
@ -4358,6 +4358,47 @@ out_put_disk:
static DEFINE_SPINLOCK(floppy_usage_lock);
static const struct io_region {
int offset;
int size;
} io_regions[] = {
{ 2, 1 },
/* address + 3 is sometimes reserved by pnp bios for motherboard */
{ 4, 2 },
/* address + 6 is reserved, and may be taken by IDE.
* Unfortunately, Adaptec doesn't know this :-(, */
{ 7, 1 },
};
static void floppy_release_allocated_regions(int fdc, const struct io_region *p)
{
while (p != io_regions) {
p--;
release_region(FDCS->address + p->offset, p->size);
}
}
#define ARRAY_END(X) (&((X)[ARRAY_SIZE(X)]))
static int floppy_request_regions(int fdc)
{
const struct io_region *p;
for (p = io_regions; p < ARRAY_END(io_regions); p++) {
if (!request_region(FDCS->address + p->offset, p->size, "floppy")) {
DPRINT("Floppy io-port 0x%04lx in use\n", FDCS->address + p->offset);
floppy_release_allocated_regions(fdc, p);
return -EBUSY;
}
}
return 0;
}
static void floppy_release_regions(int fdc)
{
floppy_release_allocated_regions(fdc, ARRAY_END(io_regions));
}
static int floppy_grab_irq_and_dma(void)
{
unsigned long flags;
@ -4399,18 +4440,8 @@ static int floppy_grab_irq_and_dma(void)
for (fdc = 0; fdc < N_FDC; fdc++) {
if (FDCS->address != -1) {
if (!request_region(FDCS->address + 2, 4, "floppy")) {
DPRINT("Floppy io-port 0x%04lx in use\n",
FDCS->address + 2);
goto cleanup1;
}
if (!request_region(FDCS->address + 7, 1, "floppy DIR")) {
DPRINT("Floppy io-port 0x%04lx in use\n",
FDCS->address + 7);
goto cleanup2;
}
/* address + 6 is reserved, and may be taken by IDE.
* Unfortunately, Adaptec doesn't know this :-(, */
if (floppy_request_regions(fdc))
goto cleanup;
}
}
for (fdc = 0; fdc < N_FDC; fdc++) {
@ -4432,15 +4463,11 @@ static int floppy_grab_irq_and_dma(void)
fdc = 0;
irqdma_allocated = 1;
return 0;
cleanup2:
release_region(FDCS->address + 2, 4);
cleanup1:
cleanup:
fd_free_irq();
fd_free_dma();
while (--fdc >= 0) {
release_region(FDCS->address + 2, 4);
release_region(FDCS->address + 7, 1);
}
while (--fdc >= 0)
floppy_release_regions(fdc);
spin_lock_irqsave(&floppy_usage_lock, flags);
usage_count--;
spin_unlock_irqrestore(&floppy_usage_lock, flags);
@ -4501,10 +4528,8 @@ static void floppy_release_irq_and_dma(void)
#endif
old_fdc = fdc;
for (fdc = 0; fdc < N_FDC; fdc++)
if (FDCS->address != -1) {
release_region(FDCS->address + 2, 4);
release_region(FDCS->address + 7, 1);
}
if (FDCS->address != -1)
floppy_release_regions(fdc);
fdc = old_fdc;
}

View File

@ -422,7 +422,7 @@ static void xs(char *buf, char *targ, int len)
for (k = 0; k < len; k++) {
char c = *buf++;
if (c != ' ' || c != l)
if (c != ' ' && c != l)
l = *targ++ = c;
}
if (l == ' ')

View File

@ -518,6 +518,7 @@ struct dma_chan *__dma_request_channel(dma_cap_mask_t *mask, dma_filter_fn fn, v
dma_chan_name(chan), err);
else
break;
chan->private = NULL;
chan = NULL;
}
}
@ -536,6 +537,7 @@ void dma_release_channel(struct dma_chan *chan)
WARN_ONCE(chan->client_count != 1,
"chan reference count %d != 1\n", chan->client_count);
dma_chan_put(chan);
chan->private = NULL;
mutex_unlock(&dma_list_mutex);
}
EXPORT_SYMBOL_GPL(dma_release_channel);

View File

@ -560,7 +560,7 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
unsigned long flags)
{
struct dw_dma_chan *dwc = to_dw_dma_chan(chan);
struct dw_dma_slave *dws = dwc->dws;
struct dw_dma_slave *dws = chan->private;
struct dw_desc *prev;
struct dw_desc *first;
u32 ctllo;
@ -790,7 +790,7 @@ static int dwc_alloc_chan_resources(struct dma_chan *chan)
cfghi = DWC_CFGH_FIFO_MODE;
cfglo = 0;
dws = dwc->dws;
dws = chan->private;
if (dws) {
/*
* We need controller-specific data to set up slave
@ -866,7 +866,6 @@ static void dwc_free_chan_resources(struct dma_chan *chan)
spin_lock_bh(&dwc->lock);
list_splice_init(&dwc->free_list, &list);
dwc->descs_allocated = 0;
dwc->dws = NULL;
/* Disable interrupts */
channel_clear_bit(dw, MASK.XFER, dwc->mask);

View File

@ -139,8 +139,6 @@ struct dw_dma_chan {
struct list_head queue;
struct list_head free_list;
struct dw_dma_slave *dws;
unsigned int descs_allocated;
};

View File

@ -1,7 +1,7 @@
/*
* linux/drivers/firmware/memmap.c
* Copyright (C) 2008 SUSE LINUX Products GmbH
* by Bernhard Walle <bwalle@suse.de>
* by Bernhard Walle <bernhard.walle@gmx.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License v2.0 as published by

View File

@ -80,18 +80,17 @@ config DRM_I915
XFree86 4.4 and above. If unsure, build this and i830 as modules and
the X server will load the correct one.
endchoice
config DRM_I915_KMS
bool "Enable modesetting on intel by default"
depends on DRM_I915
help
Choose this option if you want kernel modesetting enabled by default,
and you have a new enough userspace to support this. Running old
userspaces with this enabled will cause pain. Note that this causes
the driver to bind to PCI devices, which precludes loading things
like intelfb.
Choose this option if you want kernel modesetting enabled by default,
and you have a new enough userspace to support this. Running old
userspaces with this enabled will cause pain. Note that this causes
the driver to bind to PCI devices, which precludes loading things
like intelfb.
endchoice
config DRM_MGA
tristate "Matrox g200/g400"

View File

@ -1300,7 +1300,13 @@ static const struct hid_device_id hid_blacklist[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SUNPLUS, USB_DEVICE_ID_SUNPLUS_WDESKTOP) },
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb300) },
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb304) },
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb651) },
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, 0x030c) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_BT) },
@ -1605,6 +1611,7 @@ static const struct hid_device_id hid_ignore_list[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0002) },
{ HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0003) },
{ HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0004) },
{ HID_USB_DEVICE(USB_VENDOR_ID_POWERCOM, USB_DEVICE_ID_POWERCOM_UPS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD3) },
@ -1612,10 +1619,6 @@ static const struct hid_device_id hid_ignore_list[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD5) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY1) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb300) },
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb304) },
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb651) },
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) },
{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) },
{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) },
@ -1626,8 +1629,6 @@ static const struct hid_device_id hid_ignore_list[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_8_8_4_IF_KIT) },
{ HID_USB_DEVICE(USB_VENDOR_ID_YEALINK, USB_DEVICE_ID_YEALINK_P1K_P4K_B2K) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) },
{ }
};

View File

@ -348,6 +348,9 @@
#define USB_VENDOR_ID_PLAYDOTCOM 0x0b43
#define USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII 0x0003
#define USB_VENDOR_ID_POWERCOM 0x0d9f
#define USB_DEVICE_ID_POWERCOM_UPS 0x0002
#define USB_VENDOR_ID_SAITEK 0x06a3
#define USB_DEVICE_ID_SAITEK_RUMBLEPAD 0xff17

View File

@ -267,8 +267,10 @@ static long hidraw_ioctl(struct file *file, unsigned int cmd,
default:
{
struct hid_device *hid = dev->hid;
if (_IOC_TYPE(cmd) != 'H' || _IOC_DIR(cmd) != _IOC_READ)
return -EINVAL;
if (_IOC_TYPE(cmd) != 'H' || _IOC_DIR(cmd) != _IOC_READ) {
ret = -EINVAL;
break;
}
if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGRAWNAME(0))) {
int len;
@ -277,8 +279,9 @@ static long hidraw_ioctl(struct file *file, unsigned int cmd,
len = strlen(hid->name) + 1;
if (len > _IOC_SIZE(cmd))
len = _IOC_SIZE(cmd);
return copy_to_user(user_arg, hid->name, len) ?
ret = copy_to_user(user_arg, hid->name, len) ?
-EFAULT : len;
break;
}
if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGRAWPHYS(0))) {
@ -288,12 +291,13 @@ static long hidraw_ioctl(struct file *file, unsigned int cmd,
len = strlen(hid->phys) + 1;
if (len > _IOC_SIZE(cmd))
len = _IOC_SIZE(cmd);
return copy_to_user(user_arg, hid->phys, len) ?
ret = copy_to_user(user_arg, hid->phys, len) ?
-EFAULT : len;
break;
}
}
ret = -ENOTTY;
ret = -ENOTTY;
}
unlock_kernel();
return ret;

View File

@ -1872,7 +1872,7 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address,
devid = superio_inw(sioaddr, SIO_REG_MANID);
if (devid != SIO_FINTEK_ID) {
printk(KERN_INFO DRVNAME ": Not a Fintek device\n");
pr_debug(DRVNAME ": Not a Fintek device\n");
goto exit;
}
@ -1932,7 +1932,7 @@ static int __init f71882fg_device_add(unsigned short address,
res.name = f71882fg_pdev->name;
err = acpi_check_resource_conflict(&res);
if (err)
return err;
goto exit_device_put;
err = platform_device_add_resources(f71882fg_pdev, &res, 1);
if (err) {

View File

@ -166,6 +166,18 @@ static struct axis_conversion lis3lv02d_axis_xy_swap_yz_inverted = {2, -1, -3};
}, \
.driver_data = &lis3lv02d_axis_##_axis \
}
#define AXIS_DMI_MATCH2(_ident, _class1, _name1, \
_class2, _name2, \
_axis) { \
.ident = _ident, \
.callback = lis3lv02d_dmi_matched, \
.matches = { \
DMI_MATCH(DMI_##_class1, _name1), \
DMI_MATCH(DMI_##_class2, _name2), \
}, \
.driver_data = &lis3lv02d_axis_##_axis \
}
static struct dmi_system_id lis3lv02d_dmi_ids[] = {
/* product names are truncated to match all kinds of a same model */
AXIS_DMI_MATCH("NC64x0", "HP Compaq nc64", x_inverted),
@ -179,6 +191,16 @@ static struct dmi_system_id lis3lv02d_dmi_ids[] = {
AXIS_DMI_MATCH("NC673x", "HP Compaq 673", xy_rotated_left_usd),
AXIS_DMI_MATCH("NC651xx", "HP Compaq 651", xy_rotated_right),
AXIS_DMI_MATCH("NC671xx", "HP Compaq 671", xy_swap_yz_inverted),
/* Intel-based HP Pavilion dv5 */
AXIS_DMI_MATCH2("HPDV5_I",
PRODUCT_NAME, "HP Pavilion dv5",
BOARD_NAME, "3603",
x_inverted),
/* AMD-based HP Pavilion dv5 */
AXIS_DMI_MATCH2("HPDV5_A",
PRODUCT_NAME, "HP Pavilion dv5",
BOARD_NAME, "3600",
y_inverted),
{ NULL, }
/* Laptop models without axis info (yet):
* "NC6910" "HP Compaq 6910"
@ -213,9 +235,49 @@ static struct delayed_led_classdev hpled_led = {
.set_brightness = hpled_set,
};
static acpi_status
lis3lv02d_get_resource(struct acpi_resource *resource, void *context)
{
if (resource->type == ACPI_RESOURCE_TYPE_EXTENDED_IRQ) {
struct acpi_resource_extended_irq *irq;
u32 *device_irq = context;
irq = &resource->data.extended_irq;
*device_irq = irq->interrupts[0];
}
return AE_OK;
}
static void lis3lv02d_enum_resources(struct acpi_device *device)
{
acpi_status status;
status = acpi_walk_resources(device->handle, METHOD_NAME__CRS,
lis3lv02d_get_resource, &adev.irq);
if (ACPI_FAILURE(status))
printk(KERN_DEBUG DRIVER_NAME ": Error getting resources\n");
}
static s16 lis3lv02d_read_16(acpi_handle handle, int reg)
{
u8 lo, hi;
adev.read(handle, reg - 1, &lo);
adev.read(handle, reg, &hi);
/* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */
return (s16)((hi << 8) | lo);
}
static s16 lis3lv02d_read_8(acpi_handle handle, int reg)
{
s8 lo;
adev.read(handle, reg, &lo);
return lo;
}
static int lis3lv02d_add(struct acpi_device *device)
{
u8 val;
int ret;
if (!device)
@ -229,10 +291,22 @@ static int lis3lv02d_add(struct acpi_device *device)
strcpy(acpi_device_class(device), ACPI_MDPS_CLASS);
device->driver_data = &adev;
lis3lv02d_acpi_read(device->handle, WHO_AM_I, &val);
if ((val != LIS3LV02DL_ID) && (val != LIS302DL_ID)) {
lis3lv02d_acpi_read(device->handle, WHO_AM_I, &adev.whoami);
switch (adev.whoami) {
case LIS_DOUBLE_ID:
printk(KERN_INFO DRIVER_NAME ": 2-byte sensor found\n");
adev.read_data = lis3lv02d_read_16;
adev.mdps_max_val = 2048;
break;
case LIS_SINGLE_ID:
printk(KERN_INFO DRIVER_NAME ": 1-byte sensor found\n");
adev.read_data = lis3lv02d_read_8;
adev.mdps_max_val = 128;
break;
default:
printk(KERN_ERR DRIVER_NAME
": Accelerometer chip not LIS3LV02D{L,Q}\n");
": unknown sensor type 0x%X\n", adev.whoami);
return -EINVAL;
}
/* If possible use a "standard" axes order */
@ -247,6 +321,9 @@ static int lis3lv02d_add(struct acpi_device *device)
if (ret)
return ret;
/* obtain IRQ number of our device from ACPI */
lis3lv02d_enum_resources(adev.device);
ret = lis3lv02d_init_device(&adev);
if (ret) {
flush_work(&hpled_led.work);

View File

@ -3,7 +3,7 @@
*
* Copyright (C) 2007-2008 Yan Burman
* Copyright (C) 2008 Eric Piel
* Copyright (C) 2008 Pavel Machek
* Copyright (C) 2008-2009 Pavel Machek
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@ -35,6 +35,7 @@
#include <linux/poll.h>
#include <linux/freezer.h>
#include <linux/uaccess.h>
#include <linux/miscdevice.h>
#include <acpi/acpi_drivers.h>
#include <asm/atomic.h>
#include "lis3lv02d.h"
@ -52,24 +53,14 @@
* joystick.
*/
/* Maximum value our axis may get for the input device (signed 12 bits) */
#define MDPS_MAX_VAL 2048
struct acpi_lis3lv02d adev = {
.misc_wait = __WAIT_QUEUE_HEAD_INITIALIZER(adev.misc_wait),
};
struct acpi_lis3lv02d adev;
EXPORT_SYMBOL_GPL(adev);
static int lis3lv02d_add_fs(struct acpi_device *device);
static s16 lis3lv02d_read_16(acpi_handle handle, int reg)
{
u8 lo, hi;
adev.read(handle, reg, &lo);
adev.read(handle, reg + 1, &hi);
/* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */
return (s16)((hi << 8) | lo);
}
/**
* lis3lv02d_get_axis - For the given axis, give the value converted
* @axis: 1,2,3 - can also be negative
@ -98,9 +89,9 @@ static void lis3lv02d_get_xyz(acpi_handle handle, int *x, int *y, int *z)
{
int position[3];
position[0] = lis3lv02d_read_16(handle, OUTX_L);
position[1] = lis3lv02d_read_16(handle, OUTY_L);
position[2] = lis3lv02d_read_16(handle, OUTZ_L);
position[0] = adev.read_data(handle, OUTX);
position[1] = adev.read_data(handle, OUTY);
position[2] = adev.read_data(handle, OUTZ);
*x = lis3lv02d_get_axis(adev.ac.x, position);
*y = lis3lv02d_get_axis(adev.ac.y, position);
@ -110,26 +101,13 @@ static void lis3lv02d_get_xyz(acpi_handle handle, int *x, int *y, int *z)
void lis3lv02d_poweroff(acpi_handle handle)
{
adev.is_on = 0;
/* disable X,Y,Z axis and power down */
adev.write(handle, CTRL_REG1, 0x00);
}
EXPORT_SYMBOL_GPL(lis3lv02d_poweroff);
void lis3lv02d_poweron(acpi_handle handle)
{
u8 val;
adev.is_on = 1;
adev.init(handle);
adev.write(handle, FF_WU_CFG, 0);
/*
* BDU: LSB and MSB values are not updated until both have been read.
* So the value read will always be correct.
* IEN: Interrupt for free-fall and DD, not for data-ready.
*/
adev.read(handle, CTRL_REG2, &val);
val |= CTRL2_BDU | CTRL2_IEN;
adev.write(handle, CTRL_REG2, val);
}
EXPORT_SYMBOL_GPL(lis3lv02d_poweron);
@ -162,6 +140,140 @@ static void lis3lv02d_decrease_use(struct acpi_lis3lv02d *dev)
mutex_unlock(&dev->lock);
}
static irqreturn_t lis302dl_interrupt(int irq, void *dummy)
{
/*
* Be careful: on some HP laptops the bios force DD when on battery and
* the lid is closed. This leads to interrupts as soon as a little move
* is done.
*/
atomic_inc(&adev.count);
wake_up_interruptible(&adev.misc_wait);
kill_fasync(&adev.async_queue, SIGIO, POLL_IN);
return IRQ_HANDLED;
}
static int lis3lv02d_misc_open(struct inode *inode, struct file *file)
{
int ret;
if (test_and_set_bit(0, &adev.misc_opened))
return -EBUSY; /* already open */
atomic_set(&adev.count, 0);
/*
* The sensor can generate interrupts for free-fall and direction
* detection (distinguishable with FF_WU_SRC and DD_SRC) but to keep
* the things simple and _fast_ we activate it only for free-fall, so
* no need to read register (very slow with ACPI). For the same reason,
* we forbid shared interrupts.
*
* IRQF_TRIGGER_RISING seems pointless on HP laptops because the
* io-apic is not configurable (and generates a warning) but I keep it
* in case of support for other hardware.
*/
ret = request_irq(adev.irq, lis302dl_interrupt, IRQF_TRIGGER_RISING,
DRIVER_NAME, &adev);
if (ret) {
clear_bit(0, &adev.misc_opened);
printk(KERN_ERR DRIVER_NAME ": IRQ%d allocation failed\n", adev.irq);
return -EBUSY;
}
lis3lv02d_increase_use(&adev);
printk("lis3: registered interrupt %d\n", adev.irq);
return 0;
}
static int lis3lv02d_misc_release(struct inode *inode, struct file *file)
{
fasync_helper(-1, file, 0, &adev.async_queue);
lis3lv02d_decrease_use(&adev);
free_irq(adev.irq, &adev);
clear_bit(0, &adev.misc_opened); /* release the device */
return 0;
}
static ssize_t lis3lv02d_misc_read(struct file *file, char __user *buf,
size_t count, loff_t *pos)
{
DECLARE_WAITQUEUE(wait, current);
u32 data;
unsigned char byte_data;
ssize_t retval = 1;
if (count < 1)
return -EINVAL;
add_wait_queue(&adev.misc_wait, &wait);
while (true) {
set_current_state(TASK_INTERRUPTIBLE);
data = atomic_xchg(&adev.count, 0);
if (data)
break;
if (file->f_flags & O_NONBLOCK) {
retval = -EAGAIN;
goto out;
}
if (signal_pending(current)) {
retval = -ERESTARTSYS;
goto out;
}
schedule();
}
if (data < 255)
byte_data = data;
else
byte_data = 255;
/* make sure we are not going into copy_to_user() with
* TASK_INTERRUPTIBLE state */
set_current_state(TASK_RUNNING);
if (copy_to_user(buf, &byte_data, sizeof(byte_data)))
retval = -EFAULT;
out:
__set_current_state(TASK_RUNNING);
remove_wait_queue(&adev.misc_wait, &wait);
return retval;
}
static unsigned int lis3lv02d_misc_poll(struct file *file, poll_table *wait)
{
poll_wait(file, &adev.misc_wait, wait);
if (atomic_read(&adev.count))
return POLLIN | POLLRDNORM;
return 0;
}
static int lis3lv02d_misc_fasync(int fd, struct file *file, int on)
{
return fasync_helper(fd, file, on, &adev.async_queue);
}
static const struct file_operations lis3lv02d_misc_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.read = lis3lv02d_misc_read,
.open = lis3lv02d_misc_open,
.release = lis3lv02d_misc_release,
.poll = lis3lv02d_misc_poll,
.fasync = lis3lv02d_misc_fasync,
};
static struct miscdevice lis3lv02d_misc_device = {
.minor = MISC_DYNAMIC_MINOR,
.name = "freefall",
.fops = &lis3lv02d_misc_fops,
};
/**
* lis3lv02d_joystick_kthread - Kthread polling function
* @data: unused - here to conform to threadfn prototype
@ -203,7 +315,6 @@ static void lis3lv02d_joystick_close(struct input_dev *input)
lis3lv02d_decrease_use(&adev);
}
static inline void lis3lv02d_calibrate_joystick(void)
{
lis3lv02d_get_xyz(adev.device->handle, &adev.xcalib, &adev.ycalib, &adev.zcalib);
@ -231,9 +342,9 @@ int lis3lv02d_joystick_enable(void)
adev.idev->close = lis3lv02d_joystick_close;
set_bit(EV_ABS, adev.idev->evbit);
input_set_abs_params(adev.idev, ABS_X, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3);
input_set_abs_params(adev.idev, ABS_Y, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3);
input_set_abs_params(adev.idev, ABS_Z, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3);
input_set_abs_params(adev.idev, ABS_X, -adev.mdps_max_val, adev.mdps_max_val, 3, 3);
input_set_abs_params(adev.idev, ABS_Y, -adev.mdps_max_val, adev.mdps_max_val, 3, 3);
input_set_abs_params(adev.idev, ABS_Z, -adev.mdps_max_val, adev.mdps_max_val, 3, 3);
err = input_register_device(adev.idev);
if (err) {
@ -250,6 +361,7 @@ void lis3lv02d_joystick_disable(void)
if (!adev.idev)
return;
misc_deregister(&lis3lv02d_misc_device);
input_unregister_device(adev.idev);
adev.idev = NULL;
}
@ -268,6 +380,19 @@ int lis3lv02d_init_device(struct acpi_lis3lv02d *dev)
if (lis3lv02d_joystick_enable())
printk(KERN_ERR DRIVER_NAME ": joystick initialization failed\n");
printk("lis3_init_device: irq %d\n", dev->irq);
/* if we did not get an IRQ from ACPI - we have nothing more to do */
if (!dev->irq) {
printk(KERN_ERR DRIVER_NAME
": No IRQ in ACPI. Disabling /dev/freefall\n");
goto out;
}
printk("lis3: registering device\n");
if (misc_register(&lis3lv02d_misc_device))
printk(KERN_ERR DRIVER_NAME ": misc_register failed\n");
out:
lis3lv02d_decrease_use(dev);
return 0;
}
@ -351,6 +476,6 @@ int lis3lv02d_remove_fs(void)
EXPORT_SYMBOL_GPL(lis3lv02d_remove_fs);
MODULE_DESCRIPTION("ST LIS3LV02Dx three-axis digital accelerometer driver");
MODULE_AUTHOR("Yan Burman and Eric Piel");
MODULE_AUTHOR("Yan Burman, Eric Piel, Pavel Machek");
MODULE_LICENSE("GPL");

View File

@ -22,12 +22,15 @@
/*
* The actual chip is STMicroelectronics LIS3LV02DL or LIS3LV02DQ that seems to
* be connected via SPI. There exists also several similar chips (such as LIS302DL or
* LIS3L02DQ) but not in the HP laptops and they have slightly different registers.
* LIS3L02DQ) and they have slightly different registers, but we can provide a
* common interface for all of them.
* They can also be connected via I²C.
*/
#define LIS3LV02DL_ID 0x3A /* Also the LIS3LV02DQ */
#define LIS302DL_ID 0x3B /* Also the LIS202DL! */
/* 2-byte registers */
#define LIS_DOUBLE_ID 0x3A /* LIS3LV02D[LQ] */
/* 1-byte registers */
#define LIS_SINGLE_ID 0x3B /* LIS[32]02DL and others */
enum lis3lv02d_reg {
WHO_AM_I = 0x0F,
@ -44,10 +47,13 @@ enum lis3lv02d_reg {
STATUS_REG = 0x27,
OUTX_L = 0x28,
OUTX_H = 0x29,
OUTX = 0x29,
OUTY_L = 0x2A,
OUTY_H = 0x2B,
OUTY = 0x2B,
OUTZ_L = 0x2C,
OUTZ_H = 0x2D,
OUTZ = 0x2D,
FF_WU_CFG = 0x30,
FF_WU_SRC = 0x31,
FF_WU_ACK = 0x32,
@ -159,6 +165,10 @@ struct acpi_lis3lv02d {
acpi_status (*write) (acpi_handle handle, int reg, u8 val);
acpi_status (*read) (acpi_handle handle, int reg, u8 *ret);
u8 whoami; /* 3Ah: 2-byte registries, 3Bh: 1-byte registries */
s16 (*read_data) (acpi_handle handle, int reg);
int mdps_max_val;
struct input_dev *idev; /* input device */
struct task_struct *kthread; /* kthread for input */
struct mutex lock;
@ -170,6 +180,11 @@ struct acpi_lis3lv02d {
unsigned char is_on; /* whether the device is on or off */
unsigned char usage; /* usage counter */
struct axis_conversion ac; /* hw -> logical axis */
u32 irq; /* IRQ number */
struct fasync_struct *async_queue; /* queue for the misc device */
wait_queue_head_t misc_wait; /* Wait queue for the misc device */
unsigned long misc_opened; /* bit0: whether the device is open */
};
int lis3lv02d_init_device(struct acpi_lis3lv02d *dev);

View File

@ -1262,7 +1262,7 @@ static int __init vt1211_device_add(unsigned short address)
res.name = pdev->name;
err = acpi_check_resource_conflict(&res);
if (err)
goto EXIT;
goto EXIT_DEV_PUT;
err = platform_device_add_resources(pdev, &res, 1);
if (err) {

View File

@ -1548,7 +1548,7 @@ static int __init sensors_w83627ehf_init(void)
err = acpi_check_resource_conflict(&res);
if (err)
goto exit;
goto exit_device_put;
err = platform_device_add_resources(pdev, &res, 1);
if (err) {

View File

@ -328,7 +328,7 @@ static void dispatch_io(int rw, unsigned int num_regions,
struct dpages old_pages = *dp;
if (sync)
rw |= (1 << BIO_RW_SYNC);
rw |= (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG);
/*
* For multiple regions we need to be careful to rewind

View File

@ -344,7 +344,7 @@ static int run_io_job(struct kcopyd_job *job)
{
int r;
struct dm_io_request io_req = {
.bi_rw = job->rw | (1 << BIO_RW_SYNC),
.bi_rw = job->rw | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG),
.mem.type = DM_IO_PAGE_LIST,
.mem.ptr.pl = job->pages,
.mem.offset = job->offset,

View File

@ -474,7 +474,7 @@ void md_super_write(mddev_t *mddev, mdk_rdev_t *rdev,
* causes ENOTSUPP, we allocate a spare bio...
*/
struct bio *bio = bio_alloc(GFP_NOIO, 1);
int rw = (1<<BIO_RW) | (1<<BIO_RW_SYNC);
int rw = (1<<BIO_RW) | (1<<BIO_RW_SYNCIO) | (1<<BIO_RW_UNPLUG);
bio->bi_bdev = rdev->bdev;
bio->bi_sector = sector;
@ -531,7 +531,7 @@ int sync_page_io(struct block_device *bdev, sector_t sector, int size,
struct completion event;
int ret;
rw |= (1 << BIO_RW_SYNC);
rw |= (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG);
bio->bi_bdev = bdev;
bio->bi_sector = sector;

View File

@ -318,7 +318,6 @@ static int simple_std_setup(struct dvb_frontend *fe,
u8 *config, u8 *cb)
{
struct tuner_simple_priv *priv = fe->tuner_priv;
u8 tuneraddr;
int rc;
/* tv norm specific stuff for multi-norm tuners */
@ -387,6 +386,7 @@ static int simple_std_setup(struct dvb_frontend *fe,
case TUNER_PHILIPS_TUV1236D:
{
struct tuner_i2c_props i2c = priv->i2c_props;
/* 0x40 -> ATSC antenna input 1 */
/* 0x48 -> ATSC antenna input 2 */
/* 0x00 -> NTSC antenna input 1 */
@ -398,17 +398,15 @@ static int simple_std_setup(struct dvb_frontend *fe,
buffer[1] = 0x04;
}
/* set to the correct mode (analog or digital) */
tuneraddr = priv->i2c_props.addr;
priv->i2c_props.addr = 0x0a;
rc = tuner_i2c_xfer_send(&priv->i2c_props, &buffer[0], 2);
i2c.addr = 0x0a;
rc = tuner_i2c_xfer_send(&i2c, &buffer[0], 2);
if (2 != rc)
tuner_warn("i2c i/o error: rc == %d "
"(should be 2)\n", rc);
rc = tuner_i2c_xfer_send(&priv->i2c_props, &buffer[2], 2);
rc = tuner_i2c_xfer_send(&i2c, &buffer[2], 2);
if (2 != rc)
tuner_warn("i2c i/o error: rc == %d "
"(should be 2)\n", rc);
priv->i2c_props.addr = tuneraddr;
break;
}
}

View File

@ -364,16 +364,15 @@ static int dvb_dmxdev_section_callback(const u8 *buffer1, size_t buffer1_len,
enum dmx_success success)
{
struct dmxdev_filter *dmxdevfilter = filter->priv;
unsigned long flags;
int ret;
if (dmxdevfilter->buffer.error) {
wake_up(&dmxdevfilter->buffer.queue);
return 0;
}
spin_lock_irqsave(&dmxdevfilter->dev->lock, flags);
spin_lock(&dmxdevfilter->dev->lock);
if (dmxdevfilter->state != DMXDEV_STATE_GO) {
spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
spin_unlock(&dmxdevfilter->dev->lock);
return 0;
}
del_timer(&dmxdevfilter->timer);
@ -392,7 +391,7 @@ static int dvb_dmxdev_section_callback(const u8 *buffer1, size_t buffer1_len,
}
if (dmxdevfilter->params.sec.flags & DMX_ONESHOT)
dmxdevfilter->state = DMXDEV_STATE_DONE;
spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
spin_unlock(&dmxdevfilter->dev->lock);
wake_up(&dmxdevfilter->buffer.queue);
return 0;
}
@ -404,12 +403,11 @@ static int dvb_dmxdev_ts_callback(const u8 *buffer1, size_t buffer1_len,
{
struct dmxdev_filter *dmxdevfilter = feed->priv;
struct dvb_ringbuffer *buffer;
unsigned long flags;
int ret;
spin_lock_irqsave(&dmxdevfilter->dev->lock, flags);
spin_lock(&dmxdevfilter->dev->lock);
if (dmxdevfilter->params.pes.output == DMX_OUT_DECODER) {
spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
spin_unlock(&dmxdevfilter->dev->lock);
return 0;
}
@ -419,7 +417,7 @@ static int dvb_dmxdev_ts_callback(const u8 *buffer1, size_t buffer1_len,
else
buffer = &dmxdevfilter->dev->dvr_buffer;
if (buffer->error) {
spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
spin_unlock(&dmxdevfilter->dev->lock);
wake_up(&buffer->queue);
return 0;
}
@ -430,7 +428,7 @@ static int dvb_dmxdev_ts_callback(const u8 *buffer1, size_t buffer1_len,
dvb_ringbuffer_flush(buffer);
buffer->error = ret;
}
spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
spin_unlock(&dmxdevfilter->dev->lock);
wake_up(&buffer->queue);
return 0;
}

View File

@ -399,9 +399,7 @@ static void dvb_dmx_swfilter_packet(struct dvb_demux *demux, const u8 *buf)
void dvb_dmx_swfilter_packets(struct dvb_demux *demux, const u8 *buf,
size_t count)
{
unsigned long flags;
spin_lock_irqsave(&demux->lock, flags);
spin_lock(&demux->lock);
while (count--) {
if (buf[0] == 0x47)
@ -409,17 +407,16 @@ void dvb_dmx_swfilter_packets(struct dvb_demux *demux, const u8 *buf,
buf += 188;
}
spin_unlock_irqrestore(&demux->lock, flags);
spin_unlock(&demux->lock);
}
EXPORT_SYMBOL(dvb_dmx_swfilter_packets);
void dvb_dmx_swfilter(struct dvb_demux *demux, const u8 *buf, size_t count)
{
unsigned long flags;
int p = 0, i, j;
spin_lock_irqsave(&demux->lock, flags);
spin_lock(&demux->lock);
if (demux->tsbufp) {
i = demux->tsbufp;
@ -452,18 +449,17 @@ void dvb_dmx_swfilter(struct dvb_demux *demux, const u8 *buf, size_t count)
}
bailout:
spin_unlock_irqrestore(&demux->lock, flags);
spin_unlock(&demux->lock);
}
EXPORT_SYMBOL(dvb_dmx_swfilter);
void dvb_dmx_swfilter_204(struct dvb_demux *demux, const u8 *buf, size_t count)
{
unsigned long flags;
int p = 0, i, j;
u8 tmppack[188];
spin_lock_irqsave(&demux->lock, flags);
spin_lock(&demux->lock);
if (demux->tsbufp) {
i = demux->tsbufp;
@ -504,7 +500,7 @@ void dvb_dmx_swfilter_204(struct dvb_demux *demux, const u8 *buf, size_t count)
}
bailout:
spin_unlock_irqrestore(&demux->lock, flags);
spin_unlock(&demux->lock);
}
EXPORT_SYMBOL(dvb_dmx_swfilter_204);

View File

@ -98,11 +98,16 @@
* - blacklisted KWorld radio in hid-core.c and hid-ids.h
* 2008-12-03 Mark Lord <mlord@pobox.com>
* - add support for DealExtreme USB Radio
* 2009-01-31 Bob Ross <pigiron@gmx.com>
* - correction of stereo detection/setting
* - correction of signal strength indicator scaling
* 2009-01-31 Rick Bronson <rick@efn.org>
* Tobias Lorenz <tobias.lorenz@gmx.net>
* - add LED status output
*
* ToDo:
* - add firmware download/update support
* - RDS support: interrupt mode, instead of polling
* - add LED status output (check if that's not already done in firmware)
*/
@ -881,6 +886,30 @@ static int si470x_rds_on(struct si470x_device *radio)
/**************************************************************************
* General Driver Functions - LED_REPORT
**************************************************************************/
/*
* si470x_set_led_state - sets the led state
*/
static int si470x_set_led_state(struct si470x_device *radio,
unsigned char led_state)
{
unsigned char buf[LED_REPORT_SIZE];
int retval;
buf[0] = LED_REPORT;
buf[1] = LED_COMMAND;
buf[2] = led_state;
retval = si470x_set_report(radio, (void *) &buf, sizeof(buf));
return (retval < 0) ? -EINVAL : 0;
}
/**************************************************************************
* RDS Driver Functions
**************************************************************************/
@ -1385,20 +1414,22 @@ static int si470x_vidioc_g_tuner(struct file *file, void *priv,
};
/* stereo indicator == stereo (instead of mono) */
if ((radio->registers[STATUSRSSI] & STATUSRSSI_ST) == 1)
tuner->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
else
if ((radio->registers[STATUSRSSI] & STATUSRSSI_ST) == 0)
tuner->rxsubchans = V4L2_TUNER_SUB_MONO;
else
tuner->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
/* mono/stereo selector */
if ((radio->registers[POWERCFG] & POWERCFG_MONO) == 1)
tuner->audmode = V4L2_TUNER_MODE_MONO;
else
if ((radio->registers[POWERCFG] & POWERCFG_MONO) == 0)
tuner->audmode = V4L2_TUNER_MODE_STEREO;
else
tuner->audmode = V4L2_TUNER_MODE_MONO;
/* min is worst, max is best; signal:0..0xffff; rssi: 0..0xff */
tuner->signal = (radio->registers[STATUSRSSI] & STATUSRSSI_RSSI)
* 0x0101;
/* measured in units of dbµV in 1 db increments (max at ~75 dbµV) */
tuner->signal = (radio->registers[STATUSRSSI] & STATUSRSSI_RSSI);
/* the ideal factor is 0xffff/75 = 873,8 */
tuner->signal = (tuner->signal * 873) + (8 * tuner->signal / 10);
/* automatic frequency control: -1: freq to low, 1 freq to high */
/* AFCRL does only indicate that freq. differs, not if too low/high */
@ -1632,6 +1663,9 @@ static int si470x_usb_driver_probe(struct usb_interface *intf,
/* set initial frequency */
si470x_set_freq(radio, 87.5 * FREQ_MUL); /* available in all regions */
/* set led to connect state */
si470x_set_led_state(radio, BLINK_GREEN_LED);
/* rds buffer allocation */
radio->buf_size = rds_buf * 3;
radio->buffer = kmalloc(radio->buf_size, GFP_KERNEL);
@ -1715,6 +1749,9 @@ static void si470x_usb_driver_disconnect(struct usb_interface *intf)
cancel_delayed_work_sync(&radio->work);
usb_set_intfdata(intf, NULL);
if (radio->users == 0) {
/* set led to disconnect state */
si470x_set_led_state(radio, BLINK_ORANGE_LED);
video_unregister_device(radio->videodev);
kfree(radio->buffer);
kfree(radio);

View File

@ -422,6 +422,7 @@ static void destroy_urbs(struct gspca_dev *gspca_dev)
if (urb == NULL)
break;
BUG_ON(!gspca_dev->dev);
gspca_dev->urb[i] = NULL;
if (!gspca_dev->present)
usb_kill_urb(urb);
@ -1950,8 +1951,12 @@ void gspca_disconnect(struct usb_interface *intf)
{
struct gspca_dev *gspca_dev = usb_get_intfdata(intf);
mutex_lock(&gspca_dev->usb_lock);
gspca_dev->present = 0;
mutex_unlock(&gspca_dev->usb_lock);
destroy_urbs(gspca_dev);
gspca_dev->dev = NULL;
usb_set_intfdata(intf, NULL);
/* release the device */

View File

@ -393,7 +393,7 @@ static int ivtv_g_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_fo
return 0;
}
v4l2_subdev_call(itv->sd_video, video, s_fmt, fmt);
v4l2_subdev_call(itv->sd_video, video, g_fmt, fmt);
vbifmt->service_set = ivtv_get_service_set(vbifmt);
return 0;
}
@ -1748,6 +1748,18 @@ static long ivtv_default(struct file *file, void *fh, int cmd, void *arg)
break;
}
case IVTV_IOC_DMA_FRAME:
case VIDEO_GET_PTS:
case VIDEO_GET_FRAME_COUNT:
case VIDEO_GET_EVENT:
case VIDEO_PLAY:
case VIDEO_STOP:
case VIDEO_FREEZE:
case VIDEO_CONTINUE:
case VIDEO_COMMAND:
case VIDEO_TRY_COMMAND:
return ivtv_decoder_ioctls(file, cmd, (void *)arg);
default:
return -EINVAL;
}
@ -1790,18 +1802,6 @@ static long ivtv_serialized_ioctl(struct ivtv *itv, struct file *filp,
ivtv_vapi(itv, CX2341X_DEC_SET_AUDIO_MODE, 2, itv->audio_bilingual_mode, itv->audio_stereo_mode);
return 0;
case IVTV_IOC_DMA_FRAME:
case VIDEO_GET_PTS:
case VIDEO_GET_FRAME_COUNT:
case VIDEO_GET_EVENT:
case VIDEO_PLAY:
case VIDEO_STOP:
case VIDEO_FREEZE:
case VIDEO_CONTINUE:
case VIDEO_COMMAND:
case VIDEO_TRY_COMMAND:
return ivtv_decoder_ioctls(filp, cmd, (void *)arg);
default:
break;
}

View File

@ -286,7 +286,7 @@ static int __init egpio_probe(struct platform_device *pdev)
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
goto fail;
ei->base_addr = ioremap_nocache(res->start, res->end - res->start);
ei->base_addr = ioremap_nocache(res->start, resource_size(res));
if (!ei->base_addr)
goto fail;
pr_debug("EGPIO phys=%08x virt=%p\n", (u32)res->start, ei->base_addr);
@ -307,7 +307,7 @@ static int __init egpio_probe(struct platform_device *pdev)
ei->nchips = pdata->num_chips;
ei->chip = kzalloc(sizeof(struct egpio_chip) * ei->nchips, GFP_KERNEL);
if (!ei) {
if (!ei->chip) {
ret = -ENOMEM;
goto fail;
}

View File

@ -678,6 +678,7 @@ static int __devexit pcf50633_remove(struct i2c_client *client)
static struct i2c_device_id pcf50633_id_table[] = {
{"pcf50633", 0x73},
{/* end of list */}
};
static struct i2c_driver pcf50633_driver = {

View File

@ -1050,7 +1050,7 @@ static int __devinit sm501_gpio_register_chip(struct sm501_devdata *sm,
return gpiochip_add(gchip);
}
static int sm501_register_gpio(struct sm501_devdata *sm)
static int __devinit sm501_register_gpio(struct sm501_devdata *sm)
{
struct sm501_gpio *gpio = &sm->gpio;
resource_size_t iobase = sm->io_res->start + SM501_GPIO;
@ -1321,7 +1321,7 @@ static unsigned int sm501_mem_local[] = {
* Common init code for an SM501
*/
static int sm501_init_dev(struct sm501_devdata *sm)
static int __devinit sm501_init_dev(struct sm501_devdata *sm)
{
struct sm501_initdata *idata;
struct sm501_platdata *pdata;
@ -1397,7 +1397,7 @@ static int sm501_init_dev(struct sm501_devdata *sm)
return 0;
}
static int sm501_plat_probe(struct platform_device *dev)
static int __devinit sm501_plat_probe(struct platform_device *dev)
{
struct sm501_devdata *sm;
int ret;
@ -1586,8 +1586,8 @@ static struct sm501_platdata sm501_pci_platdata = {
.gpio_base = -1,
};
static int sm501_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
static int __devinit sm501_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
struct sm501_devdata *sm;
int err;
@ -1693,7 +1693,7 @@ static void sm501_dev_remove(struct sm501_devdata *sm)
sm501_gpio_remove(sm);
}
static void sm501_pci_remove(struct pci_dev *dev)
static void __devexit sm501_pci_remove(struct pci_dev *dev)
{
struct sm501_devdata *sm = pci_get_drvdata(dev);
@ -1727,16 +1727,16 @@ static struct pci_device_id sm501_pci_tbl[] = {
MODULE_DEVICE_TABLE(pci, sm501_pci_tbl);
static struct pci_driver sm501_pci_drv = {
static struct pci_driver sm501_pci_driver = {
.name = "sm501",
.id_table = sm501_pci_tbl,
.probe = sm501_pci_probe,
.remove = sm501_pci_remove,
.remove = __devexit_p(sm501_pci_remove),
};
MODULE_ALIAS("platform:sm501");
static struct platform_driver sm501_plat_drv = {
static struct platform_driver sm501_plat_driver = {
.driver = {
.name = "sm501",
.owner = THIS_MODULE,
@ -1749,14 +1749,14 @@ static struct platform_driver sm501_plat_drv = {
static int __init sm501_base_init(void)
{
platform_driver_register(&sm501_plat_drv);
return pci_register_driver(&sm501_pci_drv);
platform_driver_register(&sm501_plat_driver);
return pci_register_driver(&sm501_pci_driver);
}
static void __exit sm501_base_exit(void)
{
platform_driver_unregister(&sm501_plat_drv);
pci_unregister_driver(&sm501_pci_drv);
platform_driver_unregister(&sm501_plat_driver);
pci_unregister_driver(&sm501_pci_driver);
}
module_init(sm501_base_init);

View File

@ -38,7 +38,7 @@
#include <linux/i2c.h>
#include <linux/i2c/twl4030.h>
#ifdef CONFIG_ARM
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
#include <mach/cpu.h>
#endif

View File

@ -1111,7 +1111,7 @@ int wm8350_read_auxadc(struct wm8350 *wm8350, int channel, int scale, int vref)
do {
schedule_timeout_interruptible(1);
reg = wm8350_reg_read(wm8350, WM8350_DIGITISER_CONTROL_1);
} while (tries-- && (reg & WM8350_AUXADC_POLL));
} while (--tries && (reg & WM8350_AUXADC_POLL));
if (!tries)
dev_err(wm8350->dev, "adc chn %d read timeout\n", channel);
@ -1297,14 +1297,29 @@ static void wm8350_client_dev_register(struct wm8350 *wm8350,
int wm8350_device_init(struct wm8350 *wm8350, int irq,
struct wm8350_platform_data *pdata)
{
int ret = -EINVAL;
int ret;
u16 id1, id2, mask_rev;
u16 cust_id, mode, chip_rev;
/* get WM8350 revision and config mode */
wm8350->read_dev(wm8350, WM8350_RESET_ID, sizeof(id1), &id1);
wm8350->read_dev(wm8350, WM8350_ID, sizeof(id2), &id2);
wm8350->read_dev(wm8350, WM8350_REVISION, sizeof(mask_rev), &mask_rev);
ret = wm8350->read_dev(wm8350, WM8350_RESET_ID, sizeof(id1), &id1);
if (ret != 0) {
dev_err(wm8350->dev, "Failed to read ID: %d\n", ret);
goto err;
}
ret = wm8350->read_dev(wm8350, WM8350_ID, sizeof(id2), &id2);
if (ret != 0) {
dev_err(wm8350->dev, "Failed to read ID: %d\n", ret);
goto err;
}
ret = wm8350->read_dev(wm8350, WM8350_REVISION, sizeof(mask_rev),
&mask_rev);
if (ret != 0) {
dev_err(wm8350->dev, "Failed to read revision: %d\n", ret);
goto err;
}
id1 = be16_to_cpu(id1);
id2 = be16_to_cpu(id2);
@ -1404,14 +1419,12 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
return ret;
}
if (pdata && pdata->init) {
ret = pdata->init(wm8350);
if (ret != 0) {
dev_err(wm8350->dev, "Platform init() failed: %d\n",
ret);
goto err;
}
}
wm8350_reg_write(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK, 0xFFFF);
wm8350_reg_write(wm8350, WM8350_INT_STATUS_1_MASK, 0xFFFF);
wm8350_reg_write(wm8350, WM8350_INT_STATUS_2_MASK, 0xFFFF);
wm8350_reg_write(wm8350, WM8350_UNDER_VOLTAGE_INT_STATUS_MASK, 0xFFFF);
wm8350_reg_write(wm8350, WM8350_GPIO_INT_STATUS_MASK, 0xFFFF);
wm8350_reg_write(wm8350, WM8350_COMPARATOR_INT_STATUS_MASK, 0xFFFF);
mutex_init(&wm8350->auxadc_mutex);
mutex_init(&wm8350->irq_mutex);
@ -1430,6 +1443,15 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
}
wm8350->chip_irq = irq;
if (pdata && pdata->init) {
ret = pdata->init(wm8350);
if (ret != 0) {
dev_err(wm8350->dev, "Platform init() failed: %d\n",
ret);
goto err;
}
}
wm8350_reg_write(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK, 0x0);
wm8350_client_dev_register(wm8350, "wm8350-codec",

View File

@ -3188,7 +3188,7 @@ const struct wm8350_reg_access wm8350_reg_io_map[] = {
{ 0x7CFF, 0x0C00, 0x7FFF }, /* R1 - ID */
{ 0x0000, 0x0000, 0x0000 }, /* R2 */
{ 0xBE3B, 0xBE3B, 0x8000 }, /* R3 - System Control 1 */
{ 0xFCF7, 0xFCF7, 0xF800 }, /* R4 - System Control 2 */
{ 0xFEF7, 0xFEF7, 0xF800 }, /* R4 - System Control 2 */
{ 0x80FF, 0x80FF, 0x8000 }, /* R5 - System Hibernate */
{ 0xFB0E, 0xFB0E, 0x0000 }, /* R6 - Interface Control */
{ 0x0000, 0x0000, 0x0000 }, /* R7 */

View File

@ -584,7 +584,7 @@ static int mmc_blk_probe(struct mmc_card *card)
if (err)
goto out;
string_get_size(get_capacity(md->disk) << 9, STRING_UNITS_2,
string_get_size((u64)get_capacity(md->disk) << 9, STRING_UNITS_2,
cap_str, sizeof(cap_str));
printk(KERN_INFO "%s: %s %s %s %s\n",
md->disk->disk_name, mmc_card_id(card), mmc_card_name(card),

View File

@ -494,7 +494,7 @@ static int mmc_test_basic_read(struct mmc_test_card *test)
sg_init_one(&sg, test->buffer, 512);
ret = mmc_test_simple_transfer(test, &sg, 1, 0, 1, 512, 1);
ret = mmc_test_simple_transfer(test, &sg, 1, 0, 1, 512, 0);
if (ret)
return ret;

View File

@ -1548,9 +1548,10 @@ static bool filter(struct dma_chan *chan, void *slave)
{
struct dw_dma_slave *dws = slave;
if (dws->dma_dev == chan->device->dev)
if (dws->dma_dev == chan->device->dev) {
chan->private = dws;
return true;
else
} else
return false;
}
#endif

View File

@ -55,6 +55,7 @@
#define VS30 (1 << 25)
#define SDVS18 (0x5 << 9)
#define SDVS30 (0x6 << 9)
#define SDVS33 (0x7 << 9)
#define SDVSCLR 0xFFFFF1FF
#define SDVSDET 0x00000400
#define AUTOIDLE 0x1
@ -375,6 +376,32 @@ static void mmc_omap_report_irq(struct mmc_omap_host *host, u32 status)
}
#endif /* CONFIG_MMC_DEBUG */
/*
* MMC controller internal state machines reset
*
* Used to reset command or data internal state machines, using respectively
* SRC or SRD bit of SYSCTL register
* Can be called from interrupt context
*/
static inline void mmc_omap_reset_controller_fsm(struct mmc_omap_host *host,
unsigned long bit)
{
unsigned long i = 0;
unsigned long limit = (loops_per_jiffy *
msecs_to_jiffies(MMC_TIMEOUT_MS));
OMAP_HSMMC_WRITE(host->base, SYSCTL,
OMAP_HSMMC_READ(host->base, SYSCTL) | bit);
while ((OMAP_HSMMC_READ(host->base, SYSCTL) & bit) &&
(i++ < limit))
cpu_relax();
if (OMAP_HSMMC_READ(host->base, SYSCTL) & bit)
dev_err(mmc_dev(host->mmc),
"Timeout waiting on controller reset in %s\n",
__func__);
}
/*
* MMC controller IRQ handler
@ -403,21 +430,17 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
(status & CMD_CRC)) {
if (host->cmd) {
if (status & CMD_TIMEOUT) {
OMAP_HSMMC_WRITE(host->base, SYSCTL,
OMAP_HSMMC_READ(host->base,
SYSCTL) | SRC);
while (OMAP_HSMMC_READ(host->base,
SYSCTL) & SRC)
;
mmc_omap_reset_controller_fsm(host, SRC);
host->cmd->error = -ETIMEDOUT;
} else {
host->cmd->error = -EILSEQ;
}
end_cmd = 1;
}
if (host->data)
if (host->data) {
mmc_dma_cleanup(host);
mmc_omap_reset_controller_fsm(host, SRD);
}
}
if ((status & DATA_TIMEOUT) ||
(status & DATA_CRC)) {
@ -426,12 +449,7 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
mmc_dma_cleanup(host);
else
host->data->error = -EILSEQ;
OMAP_HSMMC_WRITE(host->base, SYSCTL,
OMAP_HSMMC_READ(host->base,
SYSCTL) | SRD);
while (OMAP_HSMMC_READ(host->base,
SYSCTL) & SRD)
;
mmc_omap_reset_controller_fsm(host, SRD);
end_trans = 1;
}
}
@ -456,13 +474,20 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
}
/*
* Switch MMC operating voltage
* Switch MMC interface voltage ... only relevant for MMC1.
*
* MMC2 and MMC3 use fixed 1.8V levels, and maybe a transceiver.
* The MMC2 transceiver controls are used instead of DAT4..DAT7.
* Some chips, like eMMC ones, use internal transceivers.
*/
static int omap_mmc_switch_opcond(struct mmc_omap_host *host, int vdd)
{
u32 reg_val = 0;
int ret;
if (host->id != OMAP_MMC1_DEVID)
return 0;
/* Disable the clocks */
clk_disable(host->fclk);
clk_disable(host->iclk);
@ -485,19 +510,26 @@ static int omap_mmc_switch_opcond(struct mmc_omap_host *host, int vdd)
OMAP_HSMMC_WRITE(host->base, HCTL,
OMAP_HSMMC_READ(host->base, HCTL) & SDVSCLR);
reg_val = OMAP_HSMMC_READ(host->base, HCTL);
/*
* If a MMC dual voltage card is detected, the set_ios fn calls
* this fn with VDD bit set for 1.8V. Upon card removal from the
* slot, omap_mmc_set_ios sets the VDD back to 3V on MMC_POWER_OFF.
*
* Only MMC1 supports 3.0V. MMC2 will not function if SDVS30 is
* set in HCTL.
* Cope with a bit of slop in the range ... per data sheets:
* - "1.8V" for vdds_mmc1/vdds_mmc1a can be up to 2.45V max,
* but recommended values are 1.71V to 1.89V
* - "3.0V" for vdds_mmc1/vdds_mmc1a can be up to 3.5V max,
* but recommended values are 2.7V to 3.3V
*
* Board setup code shouldn't permit anything very out-of-range.
* TWL4030-family VMMC1 and VSIM regulators are fine (avoiding the
* middle range) but VSIM can't power DAT4..DAT7 at more than 3V.
*/
if (host->id == OMAP_MMC1_DEVID && (((1 << vdd) == MMC_VDD_32_33) ||
((1 << vdd) == MMC_VDD_33_34)))
reg_val |= SDVS30;
if ((1 << vdd) == MMC_VDD_165_195)
if ((1 << vdd) <= MMC_VDD_23_24)
reg_val |= SDVS18;
else
reg_val |= SDVS30;
OMAP_HSMMC_WRITE(host->base, HCTL, reg_val);
@ -517,16 +549,15 @@ static void mmc_omap_detect(struct work_struct *work)
{
struct mmc_omap_host *host = container_of(work, struct mmc_omap_host,
mmc_carddetect_work);
struct omap_mmc_slot_data *slot = &mmc_slot(host);
host->carddetect = slot->card_detect(slot->card_detect_irq);
sysfs_notify(&host->mmc->class_dev.kobj, NULL, "cover_switch");
if (host->carddetect) {
mmc_detect_change(host->mmc, (HZ * 200) / 1000);
} else {
OMAP_HSMMC_WRITE(host->base, SYSCTL,
OMAP_HSMMC_READ(host->base, SYSCTL) | SRD);
while (OMAP_HSMMC_READ(host->base, SYSCTL) & SRD)
;
mmc_omap_reset_controller_fsm(host, SRD);
mmc_detect_change(host->mmc, (HZ * 50) / 1000);
}
}
@ -538,7 +569,6 @@ static irqreturn_t omap_mmc_cd_handler(int irq, void *dev_id)
{
struct mmc_omap_host *host = (struct mmc_omap_host *)dev_id;
host->carddetect = mmc_slot(host).card_detect(irq);
schedule_work(&host->mmc_carddetect_work);
return IRQ_HANDLED;
@ -757,10 +787,14 @@ static void omap_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
case MMC_POWER_OFF:
mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
/*
* Reset bus voltage to 3V if it got set to 1.8V earlier.
* Reset interface voltage to 3V if it's 1.8V now;
* only relevant on MMC-1, the others always use 1.8V.
*
* REVISIT: If we are able to detect cards after unplugging
* a 1.8V card, this code should not be needed.
*/
if (host->id != OMAP_MMC1_DEVID)
break;
if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) {
int vdd = fls(host->mmc->ocr_avail) - 1;
if (omap_mmc_switch_opcond(host, vdd) != 0)
@ -784,7 +818,9 @@ static void omap_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
}
if (host->id == OMAP_MMC1_DEVID) {
/* Only MMC1 can operate at 3V/1.8V */
/* Only MMC1 can interface at 3V without some flavor
* of external transceiver; but they all handle 1.8V.
*/
if ((OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET) &&
(ios->vdd == DUAL_VOLT_OCR_BIT)) {
/*
@ -1137,7 +1173,9 @@ static int omap_mmc_suspend(struct platform_device *pdev, pm_message_t state)
" level suspend\n");
}
if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) {
if (host->id == OMAP_MMC1_DEVID
&& !(OMAP_HSMMC_READ(host->base, HCTL)
& SDVSDET)) {
OMAP_HSMMC_WRITE(host->base, HCTL,
OMAP_HSMMC_READ(host->base, HCTL)
& SDVSCLR);

View File

@ -329,7 +329,7 @@ static void do_pio_write(struct s3cmci_host *host)
to_ptr = host->base + host->sdidata;
while ((fifo = fifo_free(host))) {
while ((fifo = fifo_free(host)) > 3) {
if (!host->pio_bytes) {
res = get_data_buffer(host, &host->pio_bytes,
&host->pio_ptr);

View File

@ -144,8 +144,7 @@ static int jmicron_probe(struct sdhci_pci_chip *chip)
SDHCI_QUIRK_32BIT_DMA_SIZE |
SDHCI_QUIRK_32BIT_ADMA_SIZE |
SDHCI_QUIRK_RESET_AFTER_REQUEST |
SDHCI_QUIRK_BROKEN_SMALL_PIO |
SDHCI_QUIRK_FORCE_HIGHSPEED;
SDHCI_QUIRK_BROKEN_SMALL_PIO;
}
/*

View File

@ -1636,8 +1636,7 @@ int sdhci_add_host(struct sdhci_host *host)
mmc->f_max = host->max_clk;
mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
if ((caps & SDHCI_CAN_DO_HISPD) ||
(host->quirks & SDHCI_QUIRK_FORCE_HIGHSPEED))
if (caps & SDHCI_CAN_DO_HISPD)
mmc->caps |= MMC_CAP_SD_HIGHSPEED;
mmc->ocr_avail = 0;
@ -1723,7 +1722,9 @@ int sdhci_add_host(struct sdhci_host *host)
#endif
#ifdef SDHCI_USE_LEDS_CLASS
host->led.name = mmc_hostname(mmc);
snprintf(host->led_name, sizeof(host->led_name),
"%s::", mmc_hostname(mmc));
host->led.name = host->led_name;
host->led.brightness = LED_OFF;
host->led.default_trigger = mmc_hostname(mmc);
host->led.brightness_set = sdhci_led_control;

View File

@ -208,8 +208,6 @@ struct sdhci_host {
#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12)
/* Controller has an issue with buffer bits for small transfers */
#define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13)
/* Controller supports high speed but doesn't have the caps bit set */
#define SDHCI_QUIRK_FORCE_HIGHSPEED (1<<14)
int irq; /* Device IRQ */
void __iomem * ioaddr; /* Mapped address */
@ -222,6 +220,7 @@ struct sdhci_host {
#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
struct led_classdev led; /* LED control */
char led_name[32];
#endif
spinlock_t lock; /* Mutex */

View File

@ -61,6 +61,8 @@
/* global iommu list, set NULL for ignored DMAR units */
static struct intel_iommu **g_iommus;
static int rwbf_quirk;
/*
* 0: Present
* 1-11: Reserved
@ -785,7 +787,7 @@ static void iommu_flush_write_buffer(struct intel_iommu *iommu)
u32 val;
unsigned long flag;
if (!cap_rwbf(iommu->cap))
if (!rwbf_quirk && !cap_rwbf(iommu->cap))
return;
val = iommu->gcmd | DMA_GCMD_WBF;
@ -3137,3 +3139,15 @@ static struct iommu_ops intel_iommu_ops = {
.unmap = intel_iommu_unmap_range,
.iova_to_phys = intel_iommu_iova_to_phys,
};
static void __devinit quirk_iommu_rwbf(struct pci_dev *dev)
{
/*
* Mobile 4 Series Chipset neglects to set RWBF capability,
* but needs it:
*/
printk(KERN_INFO "DMAR: Forcing write-buffer flush capability\n");
rwbf_quirk = 1;
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_rwbf);

View File

@ -103,14 +103,12 @@ static void msix_set_enable(struct pci_dev *dev, int enable)
}
}
/*
* Essentially, this is ((1 << (1 << x)) - 1), but without the
* undefinedness of a << 32.
*/
static inline __attribute_const__ u32 msi_mask(unsigned x)
{
static const u32 mask[] = { 1, 2, 4, 0xf, 0xff, 0xffff, 0xffffffff };
return mask[x];
/* Don't shift by >= width of type */
if (x >= 5)
return 0xffffffff;
return (1 << (1 << x)) - 1;
}
static void msix_flush_writes(struct irq_desc *desc)

View File

@ -1540,16 +1540,21 @@ void pci_release_region(struct pci_dev *pdev, int bar)
}
/**
* pci_request_region - Reserved PCI I/O and memory resource
* __pci_request_region - Reserved PCI I/O and memory resource
* @pdev: PCI device whose resources are to be reserved
* @bar: BAR to be reserved
* @res_name: Name to be associated with resource.
* @exclusive: whether the region access is exclusive or not
*
* Mark the PCI region associated with PCI device @pdev BR @bar as
* being reserved by owner @res_name. Do not access any
* address inside the PCI regions unless this call returns
* successfully.
*
* If @exclusive is set, then the region is marked so that userspace
* is explicitly not allowed to map the resource via /dev/mem or
* sysfs MMIO access.
*
* Returns 0 on success, or %EBUSY on error. A warning
* message is also printed on failure.
*/
@ -1588,12 +1593,12 @@ err_out:
}
/**
* pci_request_region - Reserved PCI I/O and memory resource
* pci_request_region - Reserve PCI I/O and memory resource
* @pdev: PCI device whose resources are to be reserved
* @bar: BAR to be reserved
* @res_name: Name to be associated with resource.
* @res_name: Name to be associated with resource
*
* Mark the PCI region associated with PCI device @pdev BR @bar as
* Mark the PCI region associated with PCI device @pdev BAR @bar as
* being reserved by owner @res_name. Do not access any
* address inside the PCI regions unless this call returns
* successfully.

View File

@ -16,21 +16,21 @@ extern int pci_mmap_fits(struct pci_dev *pdev, int resno,
#endif
/**
* Firmware PM callbacks
* struct pci_platform_pm_ops - Firmware PM callbacks
*
* @is_manageable - returns 'true' if given device is power manageable by the
* platform firmware
* @is_manageable: returns 'true' if given device is power manageable by the
* platform firmware
*
* @set_state - invokes the platform firmware to set the device's power state
* @set_state: invokes the platform firmware to set the device's power state
*
* @choose_state - returns PCI power state of given device preferred by the
* platform; to be used during system-wide transitions from a
* sleeping state to the working state and vice versa
* @choose_state: returns PCI power state of given device preferred by the
* platform; to be used during system-wide transitions from a
* sleeping state to the working state and vice versa
*
* @can_wakeup - returns 'true' if given device is capable of waking up the
* system from a sleeping state
* @can_wakeup: returns 'true' if given device is capable of waking up the
* system from a sleeping state
*
* @sleep_wake - enables/disables the system wake up capability of given device
* @sleep_wake: enables/disables the system wake up capability of given device
*
* If given platform is generally capable of power managing PCI devices, all of
* these callbacks are mandatory.

Some files were not shown because too many files have changed in this diff Show More