ALSA: doc: ReSTize Audigy-mixer.txt
Another simple conversion from a plain text file. Put to cards subdirectory. Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is contained in:
Takashi Iwai
parent
ecef1481d5
commit
72e6916671
|
|
@ -1,8 +1,8 @@
|
|||
=============================================
|
||||
Sound Blaster Audigy mixer / default DSP code
|
||||
=============================================
|
||||
|
||||
Sound Blaster Audigy mixer / default DSP code
|
||||
===========================================
|
||||
|
||||
This is based on SB-Live-mixer.txt.
|
||||
This is based on sb-live-mixer.rst.
|
||||
|
||||
The EMU10K2 chips have a DSP part which can be programmed to support
|
||||
various ways of sample processing, which is described here.
|
||||
|
|
@ -13,8 +13,8 @@ The ALSA driver programs this portion of chip by default code
|
|||
(can be altered later) which offers the following functionality:
|
||||
|
||||
|
||||
1) Digital mixer controls
|
||||
-------------------------
|
||||
Digital mixer controls
|
||||
======================
|
||||
|
||||
These controls are built using the DSP instructions. They offer extended
|
||||
functionality. Only the default build-in code in the ALSA driver is described
|
||||
|
|
@ -26,320 +26,343 @@ is mentioned in multiple controls, the signal is accumulated and can be wrapped
|
|||
|
||||
Explanation of used abbreviations:
|
||||
|
||||
DAC - digital to analog converter
|
||||
ADC - analog to digital converter
|
||||
I2S - one-way three wire serial bus for digital sound by Philips Semiconductors
|
||||
DAC
|
||||
digital to analog converter
|
||||
ADC
|
||||
analog to digital converter
|
||||
I2S
|
||||
one-way three wire serial bus for digital sound by Philips Semiconductors
|
||||
(this standard is used for connecting standalone DAC and ADC converters)
|
||||
LFE - low frequency effects (subwoofer signal)
|
||||
AC97 - a chip containing an analog mixer, DAC and ADC converters
|
||||
IEC958 - S/PDIF
|
||||
FX-bus - the EMU10K2 chip has an effect bus containing 64 accumulators.
|
||||
LFE
|
||||
low frequency effects (subwoofer signal)
|
||||
AC97
|
||||
a chip containing an analog mixer, DAC and ADC converters
|
||||
IEC958
|
||||
S/PDIF
|
||||
FX-bus
|
||||
the EMU10K2 chip has an effect bus containing 64 accumulators.
|
||||
Each of the synthesizer voices can feed its output to these accumulators
|
||||
and the DSP microcontroller can operate with the resulting sum.
|
||||
|
||||
name='PCM Front Playback Volume',index=0
|
||||
|
||||
----------------------------------------
|
||||
This control is used to attenuate samples for left and right front PCM FX-bus
|
||||
accumulators. ALSA uses accumulators 8 and 9 for left and right front PCM
|
||||
samples for 5.1 playback. The result samples are forwarded to the front DAC PCM
|
||||
slots of the Philips DAC.
|
||||
|
||||
name='PCM Surround Playback Volume',index=0
|
||||
|
||||
-------------------------------------------
|
||||
This control is used to attenuate samples for left and right surround PCM FX-bus
|
||||
accumulators. ALSA uses accumulators 2 and 3 for left and right surround PCM
|
||||
samples for 5.1 playback. The result samples are forwarded to the surround DAC PCM
|
||||
slots of the Philips DAC.
|
||||
|
||||
name='PCM Center Playback Volume',index=0
|
||||
|
||||
-----------------------------------------
|
||||
This control is used to attenuate samples for center PCM FX-bus accumulator.
|
||||
ALSA uses accumulator 6 for center PCM sample for 5.1 playback. The result sample
|
||||
is forwarded to the center DAC PCM slot of the Philips DAC.
|
||||
|
||||
name='PCM LFE Playback Volume',index=0
|
||||
|
||||
--------------------------------------
|
||||
This control is used to attenuate sample for LFE PCM FX-bus accumulator.
|
||||
ALSA uses accumulator 7 for LFE PCM sample for 5.1 playback. The result sample
|
||||
is forwarded to the LFE DAC PCM slot of the Philips DAC.
|
||||
|
||||
name='PCM Playback Volume',index=0
|
||||
|
||||
----------------------------------
|
||||
This control is used to attenuate samples for left and right PCM FX-bus
|
||||
accumulators. ALSA uses accumulators 0 and 1 for left and right PCM samples for
|
||||
stereo playback. The result samples are forwarded to the front DAC PCM slots
|
||||
of the Philips DAC.
|
||||
|
||||
name='PCM Capture Volume',index=0
|
||||
|
||||
---------------------------------
|
||||
This control is used to attenuate samples for left and right PCM FX-bus
|
||||
accumulator. ALSA uses accumulators 0 and 1 for left and right PCM.
|
||||
The result is forwarded to the ADC capture FIFO (thus to the standard capture
|
||||
PCM device).
|
||||
|
||||
name='Music Playback Volume',index=0
|
||||
|
||||
------------------------------------
|
||||
This control is used to attenuate samples for left and right MIDI FX-bus
|
||||
accumulators. ALSA uses accumulators 4 and 5 for left and right MIDI samples.
|
||||
The result samples are forwarded to the front DAC PCM slots of the AC97 codec.
|
||||
|
||||
name='Music Capture Volume',index=0
|
||||
|
||||
-----------------------------------
|
||||
These controls are used to attenuate samples for left and right MIDI FX-bus
|
||||
accumulator. ALSA uses accumulators 4 and 5 for left and right PCM.
|
||||
The result is forwarded to the ADC capture FIFO (thus to the standard capture
|
||||
PCM device).
|
||||
|
||||
name='Mic Playback Volume',index=0
|
||||
|
||||
----------------------------------
|
||||
This control is used to attenuate samples for left and right Mic input.
|
||||
For Mic input is used AC97 codec. The result samples are forwarded to
|
||||
the front DAC PCM slots of the Philips DAC. Samples are forwarded to Mic
|
||||
capture FIFO (device 1 - 16bit/8KHz mono) too without volume control.
|
||||
|
||||
name='Mic Capture Volume',index=0
|
||||
|
||||
---------------------------------
|
||||
This control is used to attenuate samples for left and right Mic input.
|
||||
The result is forwarded to the ADC capture FIFO (thus to the standard capture
|
||||
PCM device).
|
||||
|
||||
name='Audigy CD Playback Volume',index=0
|
||||
|
||||
----------------------------------------
|
||||
This control is used to attenuate samples from left and right IEC958 TTL
|
||||
digital inputs (usually used by a CDROM drive). The result samples are
|
||||
forwarded to the front DAC PCM slots of the Philips DAC.
|
||||
|
||||
name='Audigy CD Capture Volume',index=0
|
||||
|
||||
---------------------------------------
|
||||
This control is used to attenuate samples from left and right IEC958 TTL
|
||||
digital inputs (usually used by a CDROM drive). The result samples are
|
||||
forwarded to the ADC capture FIFO (thus to the standard capture PCM device).
|
||||
|
||||
name='IEC958 Optical Playback Volume',index=0
|
||||
|
||||
---------------------------------------------
|
||||
This control is used to attenuate samples from left and right IEC958 optical
|
||||
digital input. The result samples are forwarded to the front DAC PCM slots
|
||||
of the Philips DAC.
|
||||
|
||||
name='IEC958 Optical Capture Volume',index=0
|
||||
|
||||
--------------------------------------------
|
||||
This control is used to attenuate samples from left and right IEC958 optical
|
||||
digital inputs. The result samples are forwarded to the ADC capture FIFO
|
||||
(thus to the standard capture PCM device).
|
||||
|
||||
name='Line2 Playback Volume',index=0
|
||||
|
||||
------------------------------------
|
||||
This control is used to attenuate samples from left and right I2S ADC
|
||||
inputs (on the AudigyDrive). The result samples are forwarded to the front
|
||||
DAC PCM slots of the Philips DAC.
|
||||
|
||||
name='Line2 Capture Volume',index=1
|
||||
|
||||
-----------------------------------
|
||||
This control is used to attenuate samples from left and right I2S ADC
|
||||
inputs (on the AudigyDrive). The result samples are forwarded to the ADC
|
||||
capture FIFO (thus to the standard capture PCM device).
|
||||
|
||||
name='Analog Mix Playback Volume',index=0
|
||||
|
||||
-----------------------------------------
|
||||
This control is used to attenuate samples from left and right I2S ADC
|
||||
inputs from Philips ADC. The result samples are forwarded to the front
|
||||
DAC PCM slots of the Philips DAC. This contains mix from analog sources
|
||||
like CD, Line In, Aux, ....
|
||||
|
||||
name='Analog Mix Capture Volume',index=1
|
||||
|
||||
----------------------------------------
|
||||
This control is used to attenuate samples from left and right I2S ADC
|
||||
inputs Philips ADC. The result samples are forwarded to the ADC
|
||||
capture FIFO (thus to the standard capture PCM device).
|
||||
|
||||
name='Aux2 Playback Volume',index=0
|
||||
|
||||
-----------------------------------
|
||||
This control is used to attenuate samples from left and right I2S ADC
|
||||
inputs (on the AudigyDrive). The result samples are forwarded to the front
|
||||
DAC PCM slots of the Philips DAC.
|
||||
|
||||
name='Aux2 Capture Volume',index=1
|
||||
|
||||
----------------------------------
|
||||
This control is used to attenuate samples from left and right I2S ADC
|
||||
inputs (on the AudigyDrive). The result samples are forwarded to the ADC
|
||||
capture FIFO (thus to the standard capture PCM device).
|
||||
|
||||
name='Front Playback Volume',index=0
|
||||
|
||||
------------------------------------
|
||||
All stereo signals are mixed together and mirrored to surround, center and LFE.
|
||||
This control is used to attenuate samples for left and right front speakers of
|
||||
this mix.
|
||||
|
||||
name='Surround Playback Volume',index=0
|
||||
|
||||
---------------------------------------
|
||||
All stereo signals are mixed together and mirrored to surround, center and LFE.
|
||||
This control is used to attenuate samples for left and right surround speakers of
|
||||
this mix.
|
||||
|
||||
name='Center Playback Volume',index=0
|
||||
|
||||
-------------------------------------
|
||||
All stereo signals are mixed together and mirrored to surround, center and LFE.
|
||||
This control is used to attenuate sample for center speaker of this mix.
|
||||
|
||||
name='LFE Playback Volume',index=0
|
||||
|
||||
----------------------------------
|
||||
All stereo signals are mixed together and mirrored to surround, center and LFE.
|
||||
This control is used to attenuate sample for LFE speaker of this mix.
|
||||
|
||||
name='Tone Control - Switch',index=0
|
||||
|
||||
------------------------------------
|
||||
This control turns the tone control on or off. The samples for front, rear
|
||||
and center / LFE outputs are affected.
|
||||
|
||||
name='Tone Control - Bass',index=0
|
||||
|
||||
----------------------------------
|
||||
This control sets the bass intensity. There is no neutral value!!
|
||||
When the tone control code is activated, the samples are always modified.
|
||||
The closest value to pure signal is 20.
|
||||
|
||||
name='Tone Control - Treble',index=0
|
||||
|
||||
------------------------------------
|
||||
This control sets the treble intensity. There is no neutral value!!
|
||||
When the tone control code is activated, the samples are always modified.
|
||||
The closest value to pure signal is 20.
|
||||
|
||||
name='Master Playback Volume',index=0
|
||||
|
||||
-------------------------------------
|
||||
This control is used to attenuate samples for front, surround, center and
|
||||
LFE outputs.
|
||||
|
||||
name='IEC958 Optical Raw Playback Switch',index=0
|
||||
|
||||
-------------------------------------------------
|
||||
If this switch is on, then the samples for the IEC958 (S/PDIF) digital
|
||||
output are taken only from the raw FX8010 PCM, otherwise standard front
|
||||
PCM samples are taken.
|
||||
|
||||
|
||||
2) PCM stream related controls
|
||||
------------------------------
|
||||
PCM stream related controls
|
||||
===========================
|
||||
|
||||
name='EMU10K1 PCM Volume',index 0-31
|
||||
|
||||
------------------------------------
|
||||
Channel volume attenuation in range 0-0xffff. The maximum value (no
|
||||
attenuation) is default. The channel mapping for three values is
|
||||
as follows:
|
||||
|
||||
0 - mono, default 0xffff (no attenuation)
|
||||
1 - left, default 0xffff (no attenuation)
|
||||
2 - right, default 0xffff (no attenuation)
|
||||
* 0 - mono, default 0xffff (no attenuation)
|
||||
* 1 - left, default 0xffff (no attenuation)
|
||||
* 2 - right, default 0xffff (no attenuation)
|
||||
|
||||
name='EMU10K1 PCM Send Routing',index 0-31
|
||||
|
||||
------------------------------------------
|
||||
This control specifies the destination - FX-bus accumulators. There 24
|
||||
values with this mapping:
|
||||
|
||||
0 - mono, A destination (FX-bus 0-63), default 0
|
||||
1 - mono, B destination (FX-bus 0-63), default 1
|
||||
2 - mono, C destination (FX-bus 0-63), default 2
|
||||
3 - mono, D destination (FX-bus 0-63), default 3
|
||||
4 - mono, E destination (FX-bus 0-63), default 0
|
||||
5 - mono, F destination (FX-bus 0-63), default 0
|
||||
6 - mono, G destination (FX-bus 0-63), default 0
|
||||
7 - mono, H destination (FX-bus 0-63), default 0
|
||||
8 - left, A destination (FX-bus 0-63), default 0
|
||||
9 - left, B destination (FX-bus 0-63), default 1
|
||||
10 - left, C destination (FX-bus 0-63), default 2
|
||||
11 - left, D destination (FX-bus 0-63), default 3
|
||||
12 - left, E destination (FX-bus 0-63), default 0
|
||||
13 - left, F destination (FX-bus 0-63), default 0
|
||||
14 - left, G destination (FX-bus 0-63), default 0
|
||||
15 - left, H destination (FX-bus 0-63), default 0
|
||||
16 - right, A destination (FX-bus 0-63), default 0
|
||||
17 - right, B destination (FX-bus 0-63), default 1
|
||||
18 - right, C destination (FX-bus 0-63), default 2
|
||||
19 - right, D destination (FX-bus 0-63), default 3
|
||||
20 - right, E destination (FX-bus 0-63), default 0
|
||||
21 - right, F destination (FX-bus 0-63), default 0
|
||||
22 - right, G destination (FX-bus 0-63), default 0
|
||||
23 - right, H destination (FX-bus 0-63), default 0
|
||||
* 0 - mono, A destination (FX-bus 0-63), default 0
|
||||
* 1 - mono, B destination (FX-bus 0-63), default 1
|
||||
* 2 - mono, C destination (FX-bus 0-63), default 2
|
||||
* 3 - mono, D destination (FX-bus 0-63), default 3
|
||||
* 4 - mono, E destination (FX-bus 0-63), default 0
|
||||
* 5 - mono, F destination (FX-bus 0-63), default 0
|
||||
* 6 - mono, G destination (FX-bus 0-63), default 0
|
||||
* 7 - mono, H destination (FX-bus 0-63), default 0
|
||||
* 8 - left, A destination (FX-bus 0-63), default 0
|
||||
* 9 - left, B destination (FX-bus 0-63), default 1
|
||||
* 10 - left, C destination (FX-bus 0-63), default 2
|
||||
* 11 - left, D destination (FX-bus 0-63), default 3
|
||||
* 12 - left, E destination (FX-bus 0-63), default 0
|
||||
* 13 - left, F destination (FX-bus 0-63), default 0
|
||||
* 14 - left, G destination (FX-bus 0-63), default 0
|
||||
* 15 - left, H destination (FX-bus 0-63), default 0
|
||||
* 16 - right, A destination (FX-bus 0-63), default 0
|
||||
* 17 - right, B destination (FX-bus 0-63), default 1
|
||||
* 18 - right, C destination (FX-bus 0-63), default 2
|
||||
* 19 - right, D destination (FX-bus 0-63), default 3
|
||||
* 20 - right, E destination (FX-bus 0-63), default 0
|
||||
* 21 - right, F destination (FX-bus 0-63), default 0
|
||||
* 22 - right, G destination (FX-bus 0-63), default 0
|
||||
* 23 - right, H destination (FX-bus 0-63), default 0
|
||||
|
||||
Don't forget that it's illegal to assign a channel to the same FX-bus accumulator
|
||||
more than once (it means 0=0 && 1=0 is an invalid combination).
|
||||
|
||||
name='EMU10K1 PCM Send Volume',index 0-31
|
||||
|
||||
-----------------------------------------
|
||||
It specifies the attenuation (amount) for given destination in range 0-255.
|
||||
The channel mapping is following:
|
||||
|
||||
0 - mono, A destination attn, default 255 (no attenuation)
|
||||
1 - mono, B destination attn, default 255 (no attenuation)
|
||||
2 - mono, C destination attn, default 0 (mute)
|
||||
3 - mono, D destination attn, default 0 (mute)
|
||||
4 - mono, E destination attn, default 0 (mute)
|
||||
5 - mono, F destination attn, default 0 (mute)
|
||||
6 - mono, G destination attn, default 0 (mute)
|
||||
7 - mono, H destination attn, default 0 (mute)
|
||||
8 - left, A destination attn, default 255 (no attenuation)
|
||||
9 - left, B destination attn, default 0 (mute)
|
||||
10 - left, C destination attn, default 0 (mute)
|
||||
11 - left, D destination attn, default 0 (mute)
|
||||
12 - left, E destination attn, default 0 (mute)
|
||||
13 - left, F destination attn, default 0 (mute)
|
||||
14 - left, G destination attn, default 0 (mute)
|
||||
15 - left, H destination attn, default 0 (mute)
|
||||
16 - right, A destination attn, default 0 (mute)
|
||||
17 - right, B destination attn, default 255 (no attenuation)
|
||||
18 - right, C destination attn, default 0 (mute)
|
||||
19 - right, D destination attn, default 0 (mute)
|
||||
20 - right, E destination attn, default 0 (mute)
|
||||
21 - right, F destination attn, default 0 (mute)
|
||||
22 - right, G destination attn, default 0 (mute)
|
||||
23 - right, H destination attn, default 0 (mute)
|
||||
* 0 - mono, A destination attn, default 255 (no attenuation)
|
||||
* 1 - mono, B destination attn, default 255 (no attenuation)
|
||||
* 2 - mono, C destination attn, default 0 (mute)
|
||||
* 3 - mono, D destination attn, default 0 (mute)
|
||||
* 4 - mono, E destination attn, default 0 (mute)
|
||||
* 5 - mono, F destination attn, default 0 (mute)
|
||||
* 6 - mono, G destination attn, default 0 (mute)
|
||||
* 7 - mono, H destination attn, default 0 (mute)
|
||||
* 8 - left, A destination attn, default 255 (no attenuation)
|
||||
* 9 - left, B destination attn, default 0 (mute)
|
||||
* 10 - left, C destination attn, default 0 (mute)
|
||||
* 11 - left, D destination attn, default 0 (mute)
|
||||
* 12 - left, E destination attn, default 0 (mute)
|
||||
* 13 - left, F destination attn, default 0 (mute)
|
||||
* 14 - left, G destination attn, default 0 (mute)
|
||||
* 15 - left, H destination attn, default 0 (mute)
|
||||
* 16 - right, A destination attn, default 0 (mute)
|
||||
* 17 - right, B destination attn, default 255 (no attenuation)
|
||||
* 18 - right, C destination attn, default 0 (mute)
|
||||
* 19 - right, D destination attn, default 0 (mute)
|
||||
* 20 - right, E destination attn, default 0 (mute)
|
||||
* 21 - right, F destination attn, default 0 (mute)
|
||||
* 22 - right, G destination attn, default 0 (mute)
|
||||
* 23 - right, H destination attn, default 0 (mute)
|
||||
|
||||
|
||||
|
||||
4) MANUALS/PATENTS:
|
||||
-------------------
|
||||
MANUALS/PATENTS
|
||||
===============
|
||||
|
||||
ftp://opensource.creative.com/pub/doc
|
||||
-------------------------------------
|
||||
|
||||
Files:
|
||||
LM4545.pdf AC97 Codec
|
||||
LM4545.pdf
|
||||
AC97 Codec
|
||||
|
||||
m2049.pdf The EMU10K1 Digital Audio Processor
|
||||
m2049.pdf
|
||||
The EMU10K1 Digital Audio Processor
|
||||
|
||||
hog63.ps FX8010 - A DSP Chip Architecture for Audio Effects
|
||||
hog63.ps
|
||||
FX8010 - A DSP Chip Architecture for Audio Effects
|
||||
|
||||
|
||||
WIPO Patents
|
||||
------------
|
||||
Patent numbers:
|
||||
WO 9901813 (A1) Audio Effects Processor with multiple asynchronous (Jan. 14, 1999)
|
||||
streams
|
||||
|
||||
WO 9901814 (A1) Processor with Instruction Set for Audio Effects (Jan. 14, 1999)
|
||||
WO 9901813 (A1)
|
||||
Audio Effects Processor with multiple asynchronous streams
|
||||
(Jan. 14, 1999)
|
||||
|
||||
WO 9901953 (A1) Audio Effects Processor having Decoupled Instruction
|
||||
WO 9901814 (A1)
|
||||
Processor with Instruction Set for Audio Effects (Jan. 14, 1999)
|
||||
|
||||
WO 9901953 (A1)
|
||||
Audio Effects Processor having Decoupled Instruction
|
||||
Execution and Audio Data Sequencing (Jan. 14, 1999)
|
||||
|
||||
|
||||
US Patents (http://www.uspto.gov/)
|
||||
----------------------------------
|
||||
|
||||
US 5925841 Digital Sampling Instrument employing cache memory (Jul. 20, 1999)
|
||||
US 5925841
|
||||
Digital Sampling Instrument employing cache memory (Jul. 20, 1999)
|
||||
|
||||
US 5928342 Audio Effects Processor integrated on a single chip (Jul. 27, 1999)
|
||||
US 5928342
|
||||
Audio Effects Processor integrated on a single chip
|
||||
with a multiport memory onto which multiple asynchronous
|
||||
digital sound samples can be concurrently loaded
|
||||
(Jul. 27, 1999)
|
||||
|
||||
US 5930158 Processor with Instruction Set for Audio Effects (Jul. 27, 1999)
|
||||
US 5930158
|
||||
Processor with Instruction Set for Audio Effects (Jul. 27, 1999)
|
||||
|
||||
US 6032235 Memory initialization circuit (Tram) (Feb. 29, 2000)
|
||||
US 6032235
|
||||
Memory initialization circuit (Tram) (Feb. 29, 2000)
|
||||
|
||||
US 6138207 Interpolation looping of audio samples in cache connected to (Oct. 24, 2000)
|
||||
US 6138207
|
||||
Interpolation looping of audio samples in cache connected to
|
||||
system bus with prioritization and modification of bus transfers
|
||||
in accordance with loop ends and minimum block sizes
|
||||
(Oct. 24, 2000)
|
||||
|
||||
US 6151670 Method for conserving memory storage using a (Nov. 21, 2000)
|
||||
US 6151670
|
||||
Method for conserving memory storage using a
|
||||
pool of short term memory registers
|
||||
(Nov. 21, 2000)
|
||||
|
||||
US 6195715 Interrupt control for multiple programs communicating with (Feb. 27, 2001)
|
||||
US 6195715
|
||||
Interrupt control for multiple programs communicating with
|
||||
a common interrupt by associating programs to GP registers,
|
||||
defining interrupt register, polling GP registers, and invoking
|
||||
callback routine associated with defined interrupt register
|
||||
(Feb. 27, 2001)
|
||||
|
|
@ -7,3 +7,5 @@ Card-Specific Information
|
|||
joystick
|
||||
cmipci
|
||||
sb-live-mixer
|
||||
audigy-mixer
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue