[ARM] 3827/1: iop3xx: add common gpio module

Implement the gpio_line_{config,get,set} API for iop3xx.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Lennert Buytenhek 2006-09-18 23:23:07 +01:00 committed by Russell King
parent 610300e8f4
commit 72edd84a6b
6 changed files with 81 additions and 8 deletions

View File

@ -2,7 +2,7 @@
# Makefile for the linux kernel. # Makefile for the linux kernel.
# #
obj-y := i2c.o pci.o setup.o time.o obj-y := gpio.o i2c.o pci.o setup.o time.o
obj-m := obj-m :=
obj-n := obj-n :=
obj- := obj- :=

48
arch/arm/plat-iop/gpio.c Normal file
View File

@ -0,0 +1,48 @@
/*
* arch/arm/plat-iop/gpio.c
* GPIO handling for Intel IOP3xx processors.
*
* Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*/
#include <linux/device.h>
#include <asm/hardware/iop3xx.h>
void gpio_line_config(int line, int direction)
{
unsigned long flags;
local_irq_save(flags);
if (direction == GPIO_IN) {
*IOP3XX_GPOE |= 1 << line;
} else if (direction == GPIO_OUT) {
*IOP3XX_GPOE &= ~(1 << line);
}
local_irq_restore(flags);
}
EXPORT_SYMBOL(gpio_line_config);
int gpio_line_get(int line)
{
return !!(*IOP3XX_GPID & (1 << line));
}
EXPORT_SYMBOL(gpio_line_get);
void gpio_line_set(int line, int value)
{
unsigned long flags;
local_irq_save(flags);
if (value == GPIO_LOW) {
*IOP3XX_GPOD &= ~(1 << line);
} else if (value == GPIO_HIGH) {
*IOP3XX_GPOD |= 1 << line;
}
local_irq_restore(flags);
}
EXPORT_SYMBOL(gpio_line_set);

View File

@ -82,14 +82,16 @@ iop3xx_i2c_enable(struct i2c_algo_iop3xx_data *iop3xx_adap)
/* /*
* Every time unit enable is asserted, GPOD needs to be cleared * Every time unit enable is asserted, GPOD needs to be cleared
* on IOP32X to avoid data corruption on the bus. * on IOP3XX to avoid data corruption on the bus.
*/ */
#ifdef CONFIG_ARCH_IOP32X #ifdef CONFIG_PLAT_IOP
#define IOP321_GPOD_I2C0 0x00c0 /* clear these bits to enable ch0 */ if (iop3xx_adap->id == 0) {
#define IOP321_GPOD_I2C1 0x0030 /* clear these bits to enable ch1 */ gpio_line_set(IOP3XX_GPIO_LINE(7), GPIO_LOW);
gpio_line_set(IOP3XX_GPIO_LINE(6), GPIO_LOW);
*IOP321_GPOD &= (iop3xx_adap->id == 0) ? ~IOP321_GPOD_I2C0 : } else {
~IOP321_GPOD_I2C1; gpio_line_set(IOP3XX_GPIO_LINE(5), GPIO_LOW);
gpio_line_set(IOP3XX_GPIO_LINE(4), GPIO_LOW);
}
#endif #endif
/* NB SR bits not same position as CR IE bits :-( */ /* NB SR bits not same position as CR IE bits :-( */
iop3xx_adap->SR_enabled = iop3xx_adap->SR_enabled =

View File

@ -216,6 +216,7 @@
* Peripherals that are shared between the iop32x and iop33x but * Peripherals that are shared between the iop32x and iop33x but
* located at different addresses. * located at different addresses.
*/ */
#define IOP3XX_GPIO_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07c0 + (reg))
#define IOP3XX_TIMER_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07e0 + (reg)) #define IOP3XX_TIMER_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07e0 + (reg))
#include <asm/hardware/iop3xx.h> #include <asm/hardware/iop3xx.h>

View File

@ -221,6 +221,7 @@
* Peripherals that are shared between the iop32x and iop33x but * Peripherals that are shared between the iop32x and iop33x but
* located at different addresses. * located at different addresses.
*/ */
#define IOP3XX_GPIO_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x1780 + (reg))
#define IOP3XX_TIMER_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07d0 + (reg)) #define IOP3XX_TIMER_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07d0 + (reg))
#include <asm/hardware/iop3xx.h> #include <asm/hardware/iop3xx.h>

View File

@ -15,6 +15,22 @@
#ifndef __IOP3XX_H #ifndef __IOP3XX_H
#define __IOP3XX_H #define __IOP3XX_H
/*
* IOP3XX GPIO handling
*/
#define GPIO_IN 0
#define GPIO_OUT 1
#define GPIO_LOW 0
#define GPIO_HIGH 1
#define IOP3XX_GPIO_LINE(x) (x)
#ifndef __ASSEMBLY__
extern void gpio_line_config(int line, int direction);
extern int gpio_line_get(int line);
extern void gpio_line_set(int line, int value);
#endif
/* /*
* IOP3XX processor registers * IOP3XX processor registers
*/ */
@ -81,6 +97,11 @@
#define IOP3XX_PCIXSR (volatile u32 *)IOP3XX_REG_ADDR(0x01e4) #define IOP3XX_PCIXSR (volatile u32 *)IOP3XX_REG_ADDR(0x01e4)
#define IOP3XX_PCIIRSR (volatile u32 *)IOP3XX_REG_ADDR(0x01ec) #define IOP3XX_PCIIRSR (volatile u32 *)IOP3XX_REG_ADDR(0x01ec)
/* General Purpose I/O */
#define IOP3XX_GPOE (volatile u32 *)IOP3XX_GPIO_REG(0x0004)
#define IOP3XX_GPID (volatile u32 *)IOP3XX_GPIO_REG(0x0008)
#define IOP3XX_GPOD (volatile u32 *)IOP3XX_GPIO_REG(0x000c)
/* Timers */ /* Timers */
#define IOP3XX_TU_TMR0 (volatile u32 *)IOP3XX_TIMER_REG(0x0000) #define IOP3XX_TU_TMR0 (volatile u32 *)IOP3XX_TIMER_REG(0x0000)
#define IOP3XX_TU_TMR1 (volatile u32 *)IOP3XX_TIMER_REG(0x0004) #define IOP3XX_TU_TMR1 (volatile u32 *)IOP3XX_TIMER_REG(0x0004)