remoteproc: align code with open parenthesis

This patch fixes the existing alignment checkpatch check
warnings of the type "Alignment should match open parenthesis"
in the remoteproc core source files.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

drivers/remoteproc/remoteproc_core.c

@@ -78,7 +78,7 @@ static const char *rproc_crash_to_string(enum rproc_crash_type type)
  * will try to access an unmapped device address.
  */
 static int rproc_iommu_fault(struct iommu_domain *domain, struct device *dev,
-		unsigned long iova, int flags, void *token)
+			     unsigned long iova, int flags, void *token)
 {
 	struct rproc *rproc = token;
 
@@ -264,7 +264,7 @@ rproc_parse_vring(struct rproc_vdev *rvdev, struct fw_rsc_vdev *rsc, int i)
 	struct rproc_vring *rvring = &rvdev->vring[i];
 
 	dev_dbg(dev, "vdev rsc: vring%d: da %x, qsz %d, align %d\n",
-				i, vring->da, vring->num, vring->align);
+		i, vring->da, vring->num, vring->align);
 
 	/* make sure reserved bytes are zeroes */
 	if (vring->reserved) {
@@ -275,7 +275,7 @@ rproc_parse_vring(struct rproc_vdev *rvdev, struct fw_rsc_vdev *rsc, int i)
 	/* verify queue size and vring alignment are sane */
 	if (!vring->num || !vring->align) {
 		dev_err(dev, "invalid qsz (%d) or alignment (%d)\n",
-						vring->num, vring->align);
+			vring->num, vring->align);
 		return -EINVAL;
 	}
 
@@ -330,7 +330,7 @@ void rproc_free_vring(struct rproc_vring *rvring)
  * Returns 0 on success, or an appropriate error code otherwise
  */
 static int rproc_handle_vdev(struct rproc *rproc, struct fw_rsc_vdev *rsc,
-							int offset, int avail)
+			     int offset, int avail)
 {
 	struct device *dev = &rproc->dev;
 	struct rproc_vdev *rvdev;
@@ -407,7 +407,7 @@ free_rvdev:
  * Returns 0 on success, or an appropriate error code otherwise
  */
 static int rproc_handle_trace(struct rproc *rproc, struct fw_rsc_trace *rsc,
-							int offset, int avail)
+			      int offset, int avail)
 {
 	struct rproc_mem_entry *trace;
 	struct device *dev = &rproc->dev;
@@ -487,7 +487,7 @@ static int rproc_handle_trace(struct rproc *rproc, struct fw_rsc_trace *rsc,
  * are outside those ranges.
  */
 static int rproc_handle_devmem(struct rproc *rproc, struct fw_rsc_devmem *rsc,
-							int offset, int avail)
+			       int offset, int avail)
 {
 	struct rproc_mem_entry *mapping;
 	struct device *dev = &rproc->dev;
@@ -530,7 +530,7 @@ static int rproc_handle_devmem(struct rproc *rproc, struct fw_rsc_devmem *rsc,
 	list_add_tail(&mapping->node, &rproc->mappings);
 
 	dev_dbg(dev, "mapped devmem pa 0x%x, da 0x%x, len 0x%x\n",
-					rsc->pa, rsc->da, rsc->len);
+		rsc->pa, rsc->da, rsc->len);
 
 	return 0;
 
@@ -558,9 +558,8 @@ out:
  * pressure is important; it may have a substantial impact on performance.
  */
 static int rproc_handle_carveout(struct rproc *rproc,
-						struct fw_rsc_carveout *rsc,
+				 struct fw_rsc_carveout *rsc,
-						int offset, int avail)
+				 int offset, int avail)
-
 {
 	struct rproc_mem_entry *carveout, *mapping;
 	struct device *dev = &rproc->dev;
@@ -622,7 +621,7 @@ static int rproc_handle_carveout(struct rproc *rproc,
 		}
 
 		ret = iommu_map(rproc->domain, rsc->da, dma, rsc->len,
-								rsc->flags);
+				rsc->flags);
 		if (ret) {
 			dev_err(dev, "iommu_map failed: %d\n", ret);
 			goto free_mapping;
@@ -775,7 +774,7 @@ static void rproc_resource_cleanup(struct rproc *rproc)
 		if (unmapped != entry->len) {
 			/* nothing much to do besides complaining */
 			dev_err(dev, "failed to unmap %u/%zu\n", entry->len,
-								unmapped);
+				unmapped);
 		}
 
 		list_del(&entry->node);
@@ -1338,8 +1337,8 @@ static struct device_type rproc_type = {
  * yet. Instead, when you need to unroll rproc_alloc(), use rproc_put().
  */
 struct rproc *rproc_alloc(struct device *dev, const char *name,
-				const struct rproc_ops *ops,
+			  const struct rproc_ops *ops,
-				const char *firmware, int len)
+			  const char *firmware, int len)
 {
 	struct rproc *rproc;
 	char *p, *template = "rproc-%s-fw";

drivers/remoteproc/remoteproc_debugfs.c

@@ -45,7 +45,7 @@ static struct dentry *rproc_dbg;
  * as it provides very early tracing with little to no dependencies at all.
  */
 static ssize_t rproc_trace_read(struct file *filp, char __user *userbuf,
-						size_t count, loff_t *ppos)
+				size_t count, loff_t *ppos)
 {
 	struct rproc_mem_entry *trace = filp->private_data;
 	int len = strnlen(trace->va, trace->len);
@@ -73,7 +73,7 @@ static const char * const rproc_state_string[] = {
 
 /* expose the state of the remote processor via debugfs */
 static ssize_t rproc_state_read(struct file *filp, char __user *userbuf,
-						size_t count, loff_t *ppos)
+				size_t count, loff_t *ppos)
 {
 	struct rproc *rproc = filp->private_data;
 	unsigned int state;
@@ -83,7 +83,7 @@ static ssize_t rproc_state_read(struct file *filp, char __user *userbuf,
 	state = rproc->state > RPROC_LAST ? RPROC_LAST : rproc->state;
 
 	i = scnprintf(buf, 30, "%.28s (%d)\n", rproc_state_string[state],
-							rproc->state);
+		      rproc->state);
 
 	return simple_read_from_buffer(userbuf, count, ppos, buf, i);
 }
@@ -130,7 +130,7 @@ static const struct file_operations rproc_state_ops = {
 
 /* expose the name of the remote processor via debugfs */
 static ssize_t rproc_name_read(struct file *filp, char __user *userbuf,
-						size_t count, loff_t *ppos)
+			       size_t count, loff_t *ppos)
 {
 	struct rproc *rproc = filp->private_data;
 	/* need room for the name, a newline and a terminating null */
@@ -230,12 +230,12 @@ void rproc_remove_trace_file(struct dentry *tfile)
 }
 
 struct dentry *rproc_create_trace_file(const char *name, struct rproc *rproc,
-					struct rproc_mem_entry *trace)
+				       struct rproc_mem_entry *trace)
 {
 	struct dentry *tfile;
 
-	tfile = debugfs_create_file(name, 0400, rproc->dbg_dir,
+	tfile = debugfs_create_file(name, 0400, rproc->dbg_dir, trace,
-						trace, &trace_rproc_ops);
+				    &trace_rproc_ops);
 	if (!tfile) {
 		dev_err(&rproc->dev, "failed to create debugfs trace entry\n");
 		return NULL;
@@ -264,11 +264,11 @@ void rproc_create_debug_dir(struct rproc *rproc)
 		return;
 
 	debugfs_create_file("name", 0400, rproc->dbg_dir,
-					rproc, &rproc_name_ops);
+			    rproc, &rproc_name_ops);
 	debugfs_create_file("state", 0400, rproc->dbg_dir,
-					rproc, &rproc_state_ops);
+			    rproc, &rproc_state_ops);
 	debugfs_create_file("recovery", 0400, rproc->dbg_dir,
-					rproc, &rproc_recovery_ops);
+			    rproc, &rproc_recovery_ops);
 }
 
 void __init rproc_init_debugfs(void)

drivers/remoteproc/remoteproc_elf_loader.c

@@ -166,18 +166,18 @@ rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw)
 			continue;
 
 		dev_dbg(dev, "phdr: type %d da 0x%x memsz 0x%x filesz 0x%x\n",
-					phdr->p_type, da, memsz, filesz);
+			phdr->p_type, da, memsz, filesz);
 
 		if (filesz > memsz) {
 			dev_err(dev, "bad phdr filesz 0x%x memsz 0x%x\n",
-							filesz, memsz);
+				filesz, memsz);
 			ret = -EINVAL;
 			break;
 		}
 
 		if (offset + filesz > fw->size) {
 			dev_err(dev, "truncated fw: need 0x%x avail 0x%zx\n",
-					offset + filesz, fw->size);
+				offset + filesz, fw->size);
 			ret = -EINVAL;
 			break;
 		}

drivers/remoteproc/remoteproc_internal.h

@@ -36,10 +36,10 @@ struct rproc;
  */
 struct rproc_fw_ops {
 	struct resource_table *(*find_rsc_table)(struct rproc *rproc,
-						const struct firmware *fw,
+						 const struct firmware *fw,
-						int *tablesz);
+						 int *tablesz);
-	struct resource_table *(*find_loaded_rsc_table)(struct rproc *rproc,
+	struct resource_table *(*find_loaded_rsc_table)(
-						const struct firmware *fw);
+				struct rproc *rproc, const struct firmware *fw);
 	int (*load)(struct rproc *rproc, const struct firmware *fw);
 	int (*sanity_check)(struct rproc *rproc, const struct firmware *fw);
 	u32 (*get_boot_addr)(struct rproc *rproc, const struct firmware *fw);
@@ -57,7 +57,7 @@ void rproc_remove_virtio_dev(struct rproc_vdev *rvdev);
 /* from remoteproc_debugfs.c */
 void rproc_remove_trace_file(struct dentry *tfile);
 struct dentry *rproc_create_trace_file(const char *name, struct rproc *rproc,
-					struct rproc_mem_entry *trace);
+				       struct rproc_mem_entry *trace);
 void rproc_delete_debug_dir(struct rproc *rproc);
 void rproc_create_debug_dir(struct rproc *rproc);
 void rproc_init_debugfs(void);
@@ -98,7 +98,8 @@ int rproc_load_segments(struct rproc *rproc, const struct firmware *fw)
 
 static inline
 struct resource_table *rproc_find_rsc_table(struct rproc *rproc,
-				const struct firmware *fw, int *tablesz)
+					    const struct firmware *fw,
+					    int *tablesz)
 {
 	if (rproc->fw_ops->find_rsc_table)
 		return rproc->fw_ops->find_rsc_table(rproc, fw, tablesz);
@@ -108,7 +109,7 @@ struct resource_table *rproc_find_rsc_table(struct rproc *rproc,
 
 static inline
 struct resource_table *rproc_find_loaded_rsc_table(struct rproc *rproc,
-						const struct firmware *fw)
+						   const struct firmware *fw)
 {
 	if (rproc->fw_ops->find_loaded_rsc_table)
 		return rproc->fw_ops->find_loaded_rsc_table(rproc, fw);

drivers/remoteproc/remoteproc_virtio.c

@@ -101,14 +101,14 @@ static struct virtqueue *rp_find_vq(struct virtio_device *vdev,
 	memset(addr, 0, size);
 
 	dev_dbg(dev, "vring%d: va %p qsz %d notifyid %d\n",
-					id, addr, len, rvring->notifyid);
+		id, addr, len, rvring->notifyid);
 
 	/*
 	 * Create the new vq, and tell virtio we're not interested in
 	 * the 'weak' smp barriers, since we're talking with a real device.
 	 */
 	vq = vring_new_virtqueue(id, len, rvring->align, vdev, false, addr,
-					rproc_virtio_notify, callback, name);
+				 rproc_virtio_notify, callback, name);
 	if (!vq) {
 		dev_err(dev, "vring_new_virtqueue %s failed\n", name);
 		rproc_free_vring(rvring);
@@ -145,9 +145,9 @@ static void rproc_virtio_del_vqs(struct virtio_device *vdev)
 }
 
 static int rproc_virtio_find_vqs(struct virtio_device *vdev, unsigned int nvqs,
-		       struct virtqueue *vqs[],
+				 struct virtqueue *vqs[],
-		       vq_callback_t *callbacks[],
+				 vq_callback_t *callbacks[],
-		       const char * const names[])
+				 const char * const names[])
 {
 	struct rproc *rproc = vdev_to_rproc(vdev);
 	int i, ret;

include/linux/remoteproc.h

@@ -489,8 +489,8 @@ struct rproc_vdev {
 
 struct rproc *rproc_get_by_phandle(phandle phandle);
 struct rproc *rproc_alloc(struct device *dev, const char *name,
-				const struct rproc_ops *ops,
+			  const struct rproc_ops *ops,
-				const char *firmware, int len);
+			  const char *firmware, int len);
 void rproc_put(struct rproc *rproc);
 int rproc_add(struct rproc *rproc);
 int rproc_del(struct rproc *rproc);