ARM: SoC fixes for 3.15

A slightly larger set of fixes than we'd like at this point in the
 release. Hopefully our very last batch before 3.15:
 
  - OMAP:
    * Fix boot regression with CPU_IDLE enabled
    * Fixes for audio playback on OMAP5
    * Clock rate setting fix for OMAP3
    * Misc idle/PM fixes
  - Exynos:
    * Removal of a couple of power domains to work around issues with access
      when they are powered down
    * Enabling missing highspeed-i2c driver to make MMC regulators work
    * Secondary CPU spin-up fix for 4212
    * Remove MDMA1 engine to avoid conflicts on secure mode platforms
    * A few other DT fixes
  - Marvell:
    * PCI-e fixes for clocks and resource allocation
 
  + a few other smaller fixes, add a MAINTAINERS entry for reset drivers, etc.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJThNe/AAoJEIwa5zzehBx3fzAP/1Zd06ozJ3nkTyJwwFRJNudq
 ZkVA6KM8W12BpgNeyAekn0l6IHEZheNlUStarnnqh7xUq32cnF0mmiz20m+IzRes
 TBBUt7gF608Cddg/+yEwocJUS2fu5ME63kWIA8mcEsNeMMoytT6JHtMuq3HJseyk
 rTHyRrqvlRrxhK5nJaq5kQtWMy1NLufEW6BQbYBX3jzJ7mN6fMbQxKGEfwjlLjEI
 qb7v8wm+o20VZguX8/Jc//in29nLh1HXVvGAtQULdcOItwRSD8bnKi4Zzv4I0pwM
 S3wD5O/6qdibD+ov72qJEcQYYG/vOlGCbMEFEDFvKWsxm8UZ4hVIEk07dzgZGUEW
 TK6OdDgM/f12M1Hlxa8M/yu1zmQH2c4JADBs1/pJ+OEkDF8ap3jD0l6FTT2dKqfq
 Q8Jdf/KfD1pRRZoX9+QNBuAdXrekaYOhsrRL7hEv0bR3Q+eYN1x24mYIupeyfkwP
 S70I94kC4dBDz7CWy1LeBvCt2Wl6AuAwIfCvQ0kr0Kaj5WXHK6NZB1nl9zG+OKXX
 xyerBsRQmLUORNOK6bszAL28PvFveWQzwOJULaMRho8fLlbjI1gu/5YVjFpuF1Tt
 qPtiL4IfMJMgtebrMvpj9Ydb5TiS1pI0MxwyL6eSUz0Fo8MurXkDPLoQGwhEFvCh
 OkcKykZ63weo+iLOJw8o
 =73IV
 -----END PGP SIGNATURE-----

Merge tag 'fixes-for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "A slightly larger set of fixes than we'd like at this point in the
  release.  Hopefully our very last batch before 3.15:

  OMAP:
   - Fix boot regression with CPU_IDLE enabled
   - Fixes for audio playback on OMAP5
   - Clock rate setting fix for OMAP3
   - Misc idle/PM fixes
  Exynos:
   - Removal of a couple of power domains to work around issues with
     access when they are powered down
   - Enabling missing highspeed-i2c driver to make MMC regulators work
   - Secondary CPU spin-up fix for 4212
   - Remove MDMA1 engine to avoid conflicts on secure mode platforms
   - A few other DT fixes
  Marvell:
   - PCI-e fixes for clocks and resource allocation

  plus a few other smaller fixes, add a MAINTAINERS entry for reset
  drivers, etc"

* tag 'fixes-for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
  MAINTAINERS: Add reset controller framework entry
  ARM: trusted_foundations: fix compile error on non-SMP
  ARM: at91: sam9260: fix compilation issues
  ARM: mvebu: fix definitions of PCIe interfaces on Armada 38x
  ARM: imx: fix error handling in ipu device registration
  ARM: OMAP4: Fix the boot regression with CPU_IDLE enabled
  ARM: dts: Keep LDO4 always ON for exynos5250-arndale board
  ARM: dts: Fix SPI interrupt numbers for exynos5420
  ARM: dts: fix incorrect ak8975 compatible for exynos4412-trats2 board
  ARM: OMAP2+: Fix DMA hang after off-idle
  ARM: OMAP2+: nand: Fix NAND on OMAP2 and OMAP3 boards
  ARM: dts: Remove g2d_pd node for exynos5420
  ARM: dts: Remove mau_pd node for exynos5420
  ARM: exynos_defconfig: enable HS-I2C to fix for mmc partition mount
  ARM: dts: disable MDMA1 node for exynos5420
  ARM: EXYNOS: fix the secondary CPU boot of exynos4212
  ARM: omap5: hwmod_data: Correct IDLEMODE for McPDM
  ARM: mvebu: mvebu-soc-id: keep clock enabled if PCIe unit is enabled
  ARM: mvebu: mvebu-soc-id: add missing clk_put() call
  ARM: at91/dt: sam9260: correct external trigger value
  ...
This commit is contained in:
Linus Torvalds 2014-05-27 13:59:24 -07:00
commit 758b67126f
19 changed files with 93 additions and 45 deletions

View File

@ -7405,6 +7405,14 @@ F: drivers/rpmsg/
F: Documentation/rpmsg.txt
F: include/linux/rpmsg.h
RESET CONTROLLER FRAMEWORK
M: Philipp Zabel <p.zabel@pengutronix.de>
S: Maintained
F: drivers/reset/
F: Documentation/devicetree/bindings/reset/
F: include/linux/reset.h
F: include/linux/reset-controller.h
RFKILL
M: Johannes Berg <johannes@sipsolutions.net>
L: linux-wireless@vger.kernel.org

View File

@ -99,7 +99,7 @@
pcie@3,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
reg = <0x1800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;

View File

@ -110,7 +110,7 @@
pcie@3,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
reg = <0x1800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
@ -131,7 +131,7 @@
pcie@4,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
reg = <0x2000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;

View File

@ -641,7 +641,7 @@
trigger@3 {
reg = <3>;
trigger-name = "external";
trigger-value = <0x13>;
trigger-value = <0xd>;
trigger-external;
};
};

View File

@ -503,7 +503,7 @@
status = "okay";
ak8975@0c {
compatible = "ak,ak8975";
compatible = "asahi-kasei,ak8975";
reg = <0x0c>;
gpios = <&gpj0 7 0>;
};

View File

@ -107,6 +107,7 @@
regulator-name = "VDD_IOPERI_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
op_mode = <1>;
};

View File

@ -364,16 +364,4 @@
gpio-key,wakeup;
};
};
amba {
mdma1: mdma@11C10000 {
/*
* MDMA1 can support both secure and non-secure
* AXI transactions. When this is enabled in the kernel
* for boards that run in secure mode, we are getting
* imprecise external aborts causing the kernel to oops.
*/
status = "disabled";
};
};
};

View File

@ -219,16 +219,6 @@
reg = <0x100440C0 0x20>;
};
mau_pd: power-domain@100440E0 {
compatible = "samsung,exynos4210-pd";
reg = <0x100440E0 0x20>;
};
g2d_pd: power-domain@10044100 {
compatible = "samsung,exynos4210-pd";
reg = <0x10044100 0x20>;
};
msc_pd: power-domain@10044120 {
compatible = "samsung,exynos4210-pd";
reg = <0x10044120 0x20>;
@ -336,6 +326,13 @@
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <1>;
/*
* MDMA1 can support both secure and non-secure
* AXI transactions. When this is enabled in the kernel
* for boards that run in secure mode, we are getting
* imprecise external aborts causing the kernel to oops.
*/
status = "disabled";
};
};
@ -385,7 +382,7 @@
spi_0: spi@12d20000 {
compatible = "samsung,exynos4210-spi";
reg = <0x12d20000 0x100>;
interrupts = <0 66 0>;
interrupts = <0 68 0>;
dmas = <&pdma0 5
&pdma0 4>;
dma-names = "tx", "rx";
@ -401,7 +398,7 @@
spi_1: spi@12d30000 {
compatible = "samsung,exynos4210-spi";
reg = <0x12d30000 0x100>;
interrupts = <0 67 0>;
interrupts = <0 69 0>;
dmas = <&pdma1 5
&pdma1 4>;
dma-names = "tx", "rx";
@ -417,7 +414,7 @@
spi_2: spi@12d40000 {
compatible = "samsung,exynos4210-spi";
reg = <0x12d40000 0x100>;
interrupts = <0 68 0>;
interrupts = <0 70 0>;
dmas = <&pdma0 7
&pdma0 6>;
dma-names = "tx", "rx";
@ -730,6 +727,5 @@
interrupts = <0 112 0>;
clocks = <&clock 471>;
clock-names = "secss";
samsung,power-domain = <&g2d_pd>;
};
};

View File

@ -65,6 +65,7 @@ CONFIG_TCG_TIS_I2C_INFINEON=y
CONFIG_I2C=y
CONFIG_I2C_MUX=y
CONFIG_I2C_ARB_GPIO_CHALLENGE=y
CONFIG_I2C_EXYNOS5=y
CONFIG_I2C_S3C2410=y
CONFIG_DEBUG_GPIO=y
# CONFIG_HWMON is not set

View File

@ -54,7 +54,9 @@ static inline void register_trusted_foundations(
*/
pr_err("No support for Trusted Foundations, continuing in degraded mode.\n");
pr_err("Secondary processors as well as CPU PM will be disabled.\n");
#if IS_ENABLED(CONFIG_SMP)
setup_max_cpus = 0;
#endif
cpu_idle_poll_ctrl(true);
}

View File

@ -1308,19 +1308,19 @@ static struct platform_device at91_adc_device = {
static struct at91_adc_trigger at91_adc_triggers[] = {
[0] = {
.name = "timer-counter-0",
.value = AT91_ADC_TRGSEL_TC0 | AT91_ADC_TRGEN,
.value = 0x1,
},
[1] = {
.name = "timer-counter-1",
.value = AT91_ADC_TRGSEL_TC1 | AT91_ADC_TRGEN,
.value = 0x3,
},
[2] = {
.name = "timer-counter-2",
.value = AT91_ADC_TRGSEL_TC2 | AT91_ADC_TRGEN,
.value = 0x5,
},
[3] = {
.name = "external",
.value = AT91_ADC_TRGSEL_EXTERNAL | AT91_ADC_TRGEN,
.value = 0xd,
.is_external = true,
},
};

View File

@ -18,6 +18,8 @@
#include <mach/map.h>
#include <plat/cpu.h>
#include "smc.h"
static int exynos_do_idle(void)
@ -28,13 +30,24 @@ static int exynos_do_idle(void)
static int exynos_cpu_boot(int cpu)
{
/*
* The second parameter of SMC_CMD_CPU1BOOT command means CPU id.
* But, Exynos4212 has only one secondary CPU so second parameter
* isn't used for informing secure firmware about CPU id.
*/
if (soc_is_exynos4212())
cpu = 0;
exynos_smc(SMC_CMD_CPU1BOOT, cpu, 0, 0);
return 0;
}
static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr)
{
void __iomem *boot_reg = S5P_VA_SYSRAM_NS + 0x1c + 4*cpu;
void __iomem *boot_reg = S5P_VA_SYSRAM_NS + 0x1c;
if (!soc_is_exynos4212())
boot_reg += 4*cpu;
__raw_writel(boot_addr, boot_reg);
return 0;

View File

@ -77,7 +77,7 @@ struct platform_device *__init imx_alloc_mx3_camera(
pdev = platform_device_alloc("mx3-camera", 0);
if (!pdev)
goto err;
return ERR_PTR(-ENOMEM);
pdev->dev.dma_mask = kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
if (!pdev->dev.dma_mask)

View File

@ -108,7 +108,18 @@ static int __init mvebu_soc_id_init(void)
iounmap(pci_base);
res_ioremap:
clk_disable_unprepare(clk);
/*
* If the PCIe unit is actually enabled and we have PCI
* support in the kernel, we intentionally do not release the
* reference to the clock. We want to keep it running since
* the bootloader does some PCIe link configuration that the
* kernel is for now unable to do, and gating the clock would
* make us loose this precious configuration.
*/
if (!of_device_is_available(child) || !IS_ENABLED(CONFIG_PCI_MVEBU)) {
clk_disable_unprepare(clk);
clk_put(clk);
}
clk_err:
of_node_put(child);

View File

@ -142,7 +142,7 @@ __init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs,
board_nand_data.nr_parts = nr_parts;
board_nand_data.devsize = nand_type;
board_nand_data.ecc_opt = OMAP_ECC_BCH8_CODE_HW;
board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_HW;
gpmc_nand_init(&board_nand_data, gpmc_t);
}
#endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */

View File

@ -456,7 +456,8 @@ static struct clk_hw_omap dpll4_m5x2_ck_hw = {
.clkdm_name = "dpll4_clkdm",
};
DEFINE_STRUCT_CLK(dpll4_m5x2_ck, dpll4_m5x2_ck_parent_names, dpll4_m5x2_ck_ops);
DEFINE_STRUCT_CLK_FLAGS(dpll4_m5x2_ck, dpll4_m5x2_ck_parent_names,
dpll4_m5x2_ck_ops, CLK_SET_RATE_PARENT);
static struct clk dpll4_m5x2_ck_3630 = {
.name = "dpll4_m5x2_ck",

View File

@ -14,6 +14,7 @@
#include <linux/cpuidle.h>
#include <linux/cpu_pm.h>
#include <linux/export.h>
#include <linux/clockchips.h>
#include <asm/cpuidle.h>
#include <asm/proc-fns.h>
@ -83,6 +84,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
{
struct idle_statedata *cx = state_ptr + index;
u32 mpuss_can_lose_context = 0;
int cpu_id = smp_processor_id();
/*
* CPU0 has to wait and stay ON until CPU1 is OFF state.
@ -110,6 +112,8 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
mpuss_can_lose_context = (cx->mpu_state == PWRDM_POWER_RET) &&
(cx->mpu_logic_state == PWRDM_POWER_OFF);
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu_id);
/*
* Call idle CPU PM enter notifier chain so that
* VFP and per CPU interrupt context is saved.
@ -165,6 +169,8 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
if (dev->cpu == 0 && mpuss_can_lose_context)
cpu_cluster_pm_exit();
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu_id);
fail:
cpuidle_coupled_parallel_barrier(dev, &abort_barrier);
cpu_done[dev->cpu] = false;
@ -172,6 +178,16 @@ fail:
return index;
}
/*
* For each cpu, setup the broadcast timer because local timers
* stops for the states above C1.
*/
static void omap_setup_broadcast_timer(void *arg)
{
int cpu = smp_processor_id();
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu);
}
static struct cpuidle_driver omap4_idle_driver = {
.name = "omap4_idle",
.owner = THIS_MODULE,
@ -189,8 +205,7 @@ static struct cpuidle_driver omap4_idle_driver = {
/* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */
.exit_latency = 328 + 440,
.target_residency = 960,
.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED |
CPUIDLE_FLAG_TIMER_STOP,
.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED,
.enter = omap_enter_idle_coupled,
.name = "C2",
.desc = "CPUx OFF, MPUSS CSWR",
@ -199,8 +214,7 @@ static struct cpuidle_driver omap4_idle_driver = {
/* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */
.exit_latency = 460 + 518,
.target_residency = 1100,
.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED |
CPUIDLE_FLAG_TIMER_STOP,
.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED,
.enter = omap_enter_idle_coupled,
.name = "C3",
.desc = "CPUx OFF, MPUSS OSWR",
@ -231,5 +245,8 @@ int __init omap4_idle_init(void)
if (!cpu_clkdm[0] || !cpu_clkdm[1])
return -ENODEV;
/* Configure the broadcast timer on each cpu */
on_each_cpu(omap_setup_broadcast_timer, NULL, 1);
return cpuidle_register(&omap4_idle_driver, cpu_online_mask);
}

View File

@ -895,7 +895,7 @@ static struct omap_hwmod omap54xx_mcpdm_hwmod = {
* current exception.
*/
.flags = HWMOD_EXT_OPT_MAIN_CLK,
.flags = HWMOD_EXT_OPT_MAIN_CLK | HWMOD_SWSUP_SIDLE,
.main_clk = "pad_clks_ck",
.prcm = {
.omap4 = {

View File

@ -70,6 +70,7 @@ static u32 errata;
static struct omap_dma_global_context_registers {
u32 dma_irqenable_l0;
u32 dma_irqenable_l1;
u32 dma_ocp_sysconfig;
u32 dma_gcr;
} omap_dma_global_context;
@ -1973,10 +1974,17 @@ static struct irqaction omap24xx_dma_irq;
/*----------------------------------------------------------------------------*/
/*
* Note that we are currently using only IRQENABLE_L0 and L1.
* As the DSP may be using IRQENABLE_L2 and L3, let's not
* touch those for now.
*/
void omap_dma_global_context_save(void)
{
omap_dma_global_context.dma_irqenable_l0 =
p->dma_read(IRQENABLE_L0, 0);
omap_dma_global_context.dma_irqenable_l1 =
p->dma_read(IRQENABLE_L1, 0);
omap_dma_global_context.dma_ocp_sysconfig =
p->dma_read(OCP_SYSCONFIG, 0);
omap_dma_global_context.dma_gcr = p->dma_read(GCR, 0);
@ -1991,6 +1999,8 @@ void omap_dma_global_context_restore(void)
OCP_SYSCONFIG, 0);
p->dma_write(omap_dma_global_context.dma_irqenable_l0,
IRQENABLE_L0, 0);
p->dma_write(omap_dma_global_context.dma_irqenable_l1,
IRQENABLE_L1, 0);
if (IS_DMA_ERRATA(DMA_ROMCODE_BUG))
p->dma_write(0x3 , IRQSTATUS_L0, 0);