staging: ft1000: Merge common definitions from USB and PCMCIA drivers

Merge common definitions from ft1000-usb and ft1000-pcmcia drivers to
a common ft1000.h file.
This revealed two odd things in ft1000-usb which might be bugs so add
comments about them to ft1000_usb.h.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Ondrej Zary 2011-06-25 19:14:21 +02:00 committed by Greg Kroah-Hartman
parent e161a440af
commit 7648c996ea
4 changed files with 264 additions and 682 deletions

View File

@ -19,263 +19,18 @@
#ifndef _FT1000H_
#define _FT1000H_
#include "../ft1000.h"
#define FT1000_DRV_VER 0x01010300
#define DSPVERSZ 4
#define HWSERNUMSZ 16
#define SKUSZ 20
#define EUISZ 8
#define MODESZ 2
#define CALVERSZ 2
#define CALDATESZ 6
/* Pseudo Header structure */
struct pseudo_hdr {
unsigned short length; /* length of msg body */
unsigned char source; /* hardware source id */
/* Host = 0x10 */
/* Dsp = 0x20 */
unsigned char destination; /* hardware destination id (refer to source) */
unsigned char portdest; /* software destination port id */
/* Host = 0x00 */
/* Applicaton Broadcast = 0x10 */
/* Network Stack = 0x20 */
/* Dsp OAM = 0x80 */
/* Dsp Airlink = 0x90 */
/* Dsp Loader = 0xa0 */
/* Dsp MIP = 0xb0 */
unsigned char portsrc; /* software source port id (refer to portdest) */
unsigned short sh_str_id; /* not used */
unsigned char control; /* not used */
unsigned char rsvd1;
unsigned char seq_num; /* message sequence number */
unsigned char rsvd2;
unsigned short qos_class; /* not used */
unsigned short checksum; /* pseudo header checksum */
} __packed;
#define ELECTRABUZZ_ID 0 /* ASIC ID for Electrabuzz */
#define MAGNEMITE_ID 0x1a01 /* ASIC ID for Magnemite */
/* MEMORY MAP common to both ELECTRABUZZ and MAGNEMITE */
#define FT1000_REG_DPRAM_ADDR 0x000E /* DPADR - Dual Port Ram Indirect Address Register */
#define FT1000_REG_SUP_CTRL 0x0020 /* HCTR - Host Control Register */
#define FT1000_REG_SUP_STAT 0x0022 /* HSTAT - Host Status Register */
#define FT1000_REG_RESET 0x0024 /* HCTR - Host Control Register */
#define FT1000_REG_SUP_ISR 0x0026 /* HISR - Host Interrupt Status Register */
#define FT1000_REG_SUP_IMASK 0x0028 /* HIMASK - Host Interrupt Mask */
#define FT1000_REG_DOORBELL 0x002a /* DBELL - Door Bell Register */
#define FT1000_REG_ASIC_ID 0x002e /* ASICID - ASIC Identification Number */
/* MEMORY MAP FOR ELECTRABUZZ ASIC */
#define FT1000_REG_UFIFO_STAT 0x0000 /* UFSR - Uplink FIFO status register */
#define FT1000_REG_UFIFO_BEG 0x0002 /* UFBR - Uplink FIFO beginning register */
#define FT1000_REG_UFIFO_MID 0x0004 /* UFMR - Uplink FIFO middle register */
#define FT1000_REG_UFIFO_END 0x0006 /* UFER - Uplink FIFO end register */
#define FT1000_REG_DFIFO_STAT 0x0008 /* DFSR - Downlink FIFO status register */
#define FT1000_REG_DFIFO 0x000A /* DFR - Downlink FIFO Register */
#define FT1000_REG_DPRAM_DATA 0x000C /* DPRAM - Dual Port Indirect Data Register */
#define FT1000_REG_WATERMARK 0x0010 /* WMARK - Watermark Register */
/* MEMORY MAP FOR MAGNEMITE */
#define FT1000_REG_MAG_UFDR 0x0000 /* UFDR - Uplink FIFO Data Register (32-bits) */
#define FT1000_REG_MAG_UFDRL 0x0000 /* UFDRL - Uplink FIFO Data Register low-word (16-bits) */
#define FT1000_REG_MAG_UFDRH 0x0002 /* UFDRH - Uplink FIFO Data Register high-word (16-bits) */
#define FT1000_REG_MAG_UFER 0x0004 /* UFER - Uplink FIFO End Register */
#define FT1000_REG_MAG_UFSR 0x0006 /* UFSR - Uplink FIFO Status Register */
#define FT1000_REG_MAG_DFR 0x0008 /* DFR - Downlink FIFO Register (32-bits) */
#define FT1000_REG_MAG_DFRL 0x0008 /* DFRL - Downlink FIFO Register low-word (16-bits) */
#define FT1000_REG_MAG_DFRH 0x000a /* DFRH - Downlink FIFO Register high-word (16-bits) */
#define FT1000_REG_MAG_DFSR 0x000c /* DFSR - Downlink FIFO Status Register */
#define FT1000_REG_MAG_DPDATA 0x0010 /* DPDATA - Dual Port RAM Indirect Data Register (32-bits) */
#define FT1000_REG_MAG_DPDATAL 0x0010 /* DPDATAL - Dual Port RAM Indirect Data Register low-word (16-bits) */
#define FT1000_REG_MAG_DPDATAH 0x0012 /* DPDATAH - Dual Port RAM Indirect Data Register high-word (16-bits) */
#define FT1000_REG_MAG_WATERMARK 0x002c /* WMARK - Watermark Register */
/* Reserved Dual Port RAM offsets for Electrabuzz */
#define FT1000_DPRAM_TX_BASE 0x0002 /* Host to PC Card Messaging Area */
#define FT1000_DPRAM_RX_BASE 0x0800 /* PC Card to Host Messaging Area */
#define FT1000_FIFO_LEN 0x07FC /* total length for DSP FIFO tracking */
#define FT1000_HI_HO 0x07FE /* heartbeat with HI/HO */
#define FT1000_DSP_STATUS 0x0FFE /* dsp status - non-zero is a request to reset dsp */
#define FT1000_DSP_LED 0x0FFA /* dsp led status for PAD device */
#define FT1000_DSP_CON_STATE 0x0FF8 /* DSP Connection Status Info */
#define FT1000_DPRAM_FEFE 0x0002 /* location for dsp ready indicator */
#define FT1000_DSP_TIMER0 0x1FF0 /* Timer Field from Basestation */
#define FT1000_DSP_TIMER1 0x1FF2 /* Timer Field from Basestation */
#define FT1000_DSP_TIMER2 0x1FF4 /* Timer Field from Basestation */
#define FT1000_DSP_TIMER3 0x1FF6 /* Timer Field from Basestation */
/* Reserved Dual Port RAM offsets for Magnemite */
#define FT1000_DPRAM_MAG_TX_BASE 0x0000 /* Host to PC Card Messaging Area */
#define FT1000_DPRAM_MAG_RX_BASE 0x0200 /* PC Card to Host Messaging Area */
#define FT1000_MAG_FIFO_LEN 0x1FF /* total length for DSP FIFO tracking */
#define FT1000_MAG_FIFO_LEN_INDX 0x1 /* low-word index */
#define FT1000_MAG_HI_HO 0x1FF /* heartbeat with HI/HO */
#define FT1000_MAG_HI_HO_INDX 0x0 /* high-word index */
#define FT1000_MAG_DSP_LED 0x3FE /* dsp led status for PAD device */
#define FT1000_MAG_DSP_LED_INDX 0x0 /* dsp led status for PAD device */
#define FT1000_MAG_DSP_CON_STATE 0x3FE /* DSP Connection Status Info */
#define FT1000_MAG_DSP_CON_STATE_INDX 0x1 /* DSP Connection Status Info */
#define FT1000_MAG_DPRAM_FEFE 0x000 /* location for dsp ready indicator */
#define FT1000_MAG_DPRAM_FEFE_INDX 0x0 /* location for dsp ready indicator */
#define FT1000_MAG_DSP_TIMER0 0x3FC /* Timer Field from Basestation */
#define FT1000_MAG_DSP_TIMER0_INDX 0x1
#define FT1000_MAG_DSP_TIMER1 0x3FC /* Timer Field from Basestation */
#define FT1000_MAG_DSP_TIMER1_INDX 0x0
#define FT1000_MAG_DSP_TIMER2 0x3FD /* Timer Field from Basestation */
#define FT1000_MAG_DSP_TIMER2_INDX 0x1
#define FT1000_MAG_DSP_TIMER3 0x3FD /* Timer Field from Basestation */
#define FT1000_MAG_DSP_TIMER3_INDX 0x0
#define FT1000_MAG_TOTAL_LEN 0x200
#define FT1000_MAG_TOTAL_LEN_INDX 0x1
#define FT1000_MAG_PH_LEN 0x200
#define FT1000_MAG_PH_LEN_INDX 0x0
#define FT1000_MAG_PORT_ID 0x201
#define FT1000_MAG_PORT_ID_INDX 0x0
#define HOST_INTF_LE 0x0 /* Host interface little endian mode */
#define HOST_INTF_BE 0x1 /* Host interface big endian mode */
/* PC Card to Host Doorbell assignments */
#define FT1000_DB_DPRAM_RX 0x0001 /* this value indicates that DSP has data for host in DPRAM */
#define FT1000_ASIC_RESET_REQ 0x0004 /* DSP requesting host to reset the ASIC */
#define FT1000_DSP_ASIC_RESET 0x0008 /* DSP indicating host that it will reset the ASIC */
#define FT1000_DB_COND_RESET 0x0010 /* DSP request for a card reset. */
/* Host to PC Card Doorbell assignments */
#define FT1000_DB_DPRAM_TX 0x0100 /* this value indicates that host has data for DSP in DPRAM. */
#define FT1000_ASIC_RESET_DSP 0x0400 /* Responds to FT1000_ASIC_RESET_REQ */
#define FT1000_DB_HB 0x1000 /* Indicates that supervisor has a heartbeat message for DSP. */
#define FT1000_DPRAM_BASE 0x0000 /* Dual Port RAM starting offset */
#define hi 0x6869 /* PC Card heartbeat values */
#define ho 0x686f /* PC Card heartbeat values */
/* Magnemite specific defines */
#define hi_mag 0x6968 /* Byte swap hi to avoid additional system call */
#define ho_mag 0x6f68 /* Byte swap ho to avoid additional system call */
/* Bit field definitions for Host Interrupt Status Register */
/* Indicate the cause of an interrupt. */
#define ISR_EMPTY 0x00 /* no bits set */
#define ISR_DOORBELL_ACK 0x01 /* Doorbell acknowledge from DSP */
#define ISR_DOORBELL_PEND 0x02 /* Doorbell pending from DSP */
#define ISR_RCV 0x04 /* Packet available in Downlink FIFO */
#define ISR_WATERMARK 0x08 /* Watermark requirements satisfied */
/* Bit field definition for Host Interrupt Mask */
#define ISR_MASK_NONE 0x0000 /* no bits set */
#define ISR_MASK_DOORBELL_ACK 0x0001 /* Doorbell acknowledge mask */
#define ISR_MASK_DOORBELL_PEND 0x0002 /* Doorbell pending mask */
#define ISR_MASK_RCV 0x0004 /* Downlink Packet available mask */
#define ISR_MASK_WATERMARK 0x0008 /* Watermark interrupt mask */
#define ISR_MASK_ALL 0xffff /* Mask all interrupts */
/* Bit field definition for Host Control Register */
#define DSP_RESET_BIT 0x0001 /* Bit field to control dsp reset state */
/* (0 = out of reset 1 = reset) */
#define ASIC_RESET_BIT 0x0002 /* Bit field to control ASIC reset state */
/* (0 = out of reset 1 = reset) */
/* Default interrupt mask (Enable Doorbell pending and Packet available interrupts) */
#define ISR_DEFAULT_MASK 0x7ff9
/* Application specific IDs */
#define DSPID 0x20
#define HOSTID 0x10
#define DSPAIRID 0x90
#define DRIVERID 0x00
#define NETWORKID 0x20
/* Size of DPRAM Message */
#define MAX_CMD_SQSIZE 1780
#define ENET_MAX_SIZE 1514
#define ENET_HEADER_SIZE 14
#define SLOWQ_TYPE 0
#define FASTQ_TYPE 1
#define MAX_DSP_SESS_REC 1024
#define DSP_QID_OFFSET 4
/* Maximum number of occurrence of pseudo header errors before resetting PC Card. */
#define MAX_PH_ERR 300
/* Driver message types */
#define MEDIA_STATE 0x0010
#define TIME_UPDATE 0x0020
#define DSP_PROVISION 0x0030
#define DSP_INIT_MSG 0x0050
#define DSP_HIBERNATE 0x0060
#define DSP_STORE_INFO 0x0070
#define DSP_GET_INFO 0x0071
#define GET_DRV_ERR_RPT_MSG 0x0073
#define RSP_DRV_ERR_RPT_MSG 0x0074
/* Driver Error Messages for DSP */
#define DSP_HB_INFO 0x7ef0
#define DSP_FIFO_INFO 0x7ef1
#define DSP_CONDRESET_INFO 0x7ef2
#define DSP_CMDLEN_INFO 0x7ef3
#define DSP_CMDPHCKSUM_INFO 0x7ef4
#define DSP_PKTPHCKSUM_INFO 0x7ef5
#define DSP_PKTLEN_INFO 0x7ef6
#define DSP_USER_RESET 0x7ef7
#define FIFO_FLUSH_MAXLIMIT 0x7ef8
#define FIFO_FLUSH_BADCNT 0x7ef9
#define FIFO_ZERO_LEN 0x7efa
#define HOST_QID_OFFSET 5
#define QTYPE_OFFSET 13
#define SUCCESS 0x00
#define FAILURE 0x01
#define MAXIMUM_ASIC_HB_CNT 15
struct drv_msg {
struct pseudo_hdr pseudo;
u16 type;
u16 length;
u8 data[0];
} __packed;
struct media_msg {
struct pseudo_hdr pseudo;
u16 type;
u16 length;
u16 state;
u32 ip_addr;
u32 net_mask;
u32 gateway;
u32 dns_1;
u32 dns_2;
} __packed;
struct dsp_init_msg {
struct pseudo_hdr pseudo;
u16 type;
u16 length;
u8 DspVer[DSPVERSZ]; /* DSP version number */
u8 HwSerNum[HWSERNUMSZ]; /* Hardware Serial Number */
u8 Sku[SKUSZ]; /* SKU */
u8 eui64[EUISZ]; /* EUI64 */
u8 ProductMode[MODESZ]; /* Product Mode (Market/Production) */
u8 RfCalVer[CALVERSZ]; /* Rf Calibration version */
u8 RfCalDate[CALDATESZ]; /* Rf Calibration date */
} __packed;
struct prov_record {
struct list_head list;
u8 *pprov_data;
};
struct ft1000_info {
struct net_device_stats stats;
u16 DrvErrNum;

View File

@ -26,38 +26,6 @@
#ifndef _FT1000IOCTLH_
#define _FT1000IOCTLH_
#define DSPVERSZ 4
#define HWSERNUMSZ 16
#define SKUSZ 20
#define EUISZ 8
#define CALVERSZ 2
#define CALDATESZ 6
#define MAX_DNLD_BLKSZ 1024
// Standard Flarion Pseudo header
struct pseudo_hdr {
unsigned short length; //length of msg body
unsigned char source; //source address (0x10=Host 0x20=DSP)
unsigned char destination; //destination address (refer to source address)
unsigned char portdest; //destination port id
// 0x00=Driver
// 0x10=Application Broadcast
// 0x20=Network Stack
// 0x80=Dsp OAM
// 0x90=Dsp Airlink
// 0xa0=Dsp Loader
// 0xb0=Dsp MIP
unsigned char portsrc; //source port id (refer to portdest)
unsigned short sh_str_id; //stream id (Not applicable on Mobile)
unsigned char control; //stream id (Not applicable on Mobile)
unsigned char rsvd1; //reserved
unsigned char seq_num; //sequence number
unsigned char rsvd2; //reserved
unsigned short qos_class; //Quality of Service class (Not applicable on Mobile)
unsigned short checksum; //Pseudo header checksum
} __attribute__ ((packed));
typedef struct _IOCTL_GET_VER
{
unsigned long drv_ver;

View File

@ -2,81 +2,18 @@
#define _FT1000_USB_H_
/*Jim*/
#include "../ft1000.h"
#include "ft1000_ioctl.h"
#define FT1000_DRV_VER 0x01010403
#define MODESZ 2
#define MAX_NUM_APP 6
#define MAX_MSG_LIMIT 200
#define NUM_OF_FREE_BUFFERS 1500
// Driver message types
#define MEDIA_STATE 0x0010
#define DSP_PROVISION 0x0030
#define DSP_INIT_MSG 0x0050
#define DSP_STORE_INFO 0x0070
#define DSP_GET_INFO 0x0071
#define GET_DRV_ERR_RPT_MSG 0x0073
#define RSP_DRV_ERR_RPT_MSG 0x0074
// Size of DPRAM Command
#define MAX_CMD_SQSIZE 1780
#define SLOWQ_TYPE 0
#define PSEUDOSZ 16
#define DSP_QID_OFFSET 4
// MEMORY MAP FOR ELECTRABUZZ ASIC
#define FT1000_REG_DFIFO_STAT 0x0008 // Downlink FIFO status register
#define FT1000_REG_DPRAM_DATA 0x000C // DPRAM VALUE in DPRAM ADDR
#define FT1000_DSP_LED 0xFFA // dsp led status for PAD device
#define FT1000_MAG_DSP_LED 0x3FE // dsp led status for PAD device
#define FT1000_MAG_DSP_LED_INDX 0x1 // dsp led status for PAD device
#define SUCCESS 0x00
#define DRIVERID 0x00
// Driver Error Messages for DSP
#define DSP_CONDRESET_INFO 0x7ef2
#define DSP_HB_INFO 0x7ef0
// Magnemite specific defines
#define hi_mag 0x6968 // Byte swap hi to avoid additional system call
#define ho_mag 0x6f68 // Byte swap ho to avoid additional system call
struct media_msg {
struct pseudo_hdr pseudo;
u16 type;
u16 length;
u16 state;
u32 ip_addr;
u32 net_mask;
u32 gateway;
u32 dns_1;
u32 dns_2;
} __attribute__ ((packed));
struct dsp_init_msg {
struct pseudo_hdr pseudo;
u16 type;
u16 length;
u8 DspVer[DSPVERSZ]; // DSP version number
u8 HwSerNum[HWSERNUMSZ]; // Hardware Serial Number
u8 Sku[SKUSZ]; // SKU
u8 eui64[EUISZ]; // EUI64
u8 ProductMode[MODESZ]; // Product Mode (Market/Production)
u8 RfCalVer[CALVERSZ]; // Rf Calibration version
u8 RfCalDate[CALDATESZ]; // Rf Calibration date
} __attribute__ ((packed));
struct app_info_block {
u32 nTxMsg; // DPRAM msg sent to DSP with app_id
u32 nRxMsg; // DPRAM msg rcv from dsp with app_id
@ -90,11 +27,6 @@ struct app_info_block {
struct list_head app_sqlist; // link list of msgs for applicaton on slow queue
} __attribute__((packed));
struct prov_record {
struct list_head list;
u8 *pprov_data;
};
/*end of Jim*/
#define DEBUG(args...) printk(KERN_INFO args)
@ -108,350 +40,25 @@ struct prov_record {
#define LARGE_TIMEOUT 5000
#define MAX_DSP_SESS_REC 1024
#define MAX_NUM_CARDS 32
#define DSPVERSZ 4
#define HWSERNUMSZ 16
#define SKUSZ 20
#define EUISZ 8
#define CALVERSZ 2
#define CALDATESZ 6
#define MODESZ 2
#define DSPID 0x20
#define HOSTID 0x10
#define DSPOAM 0x80
#define DSPAIRID 0x90
#define DRIVERID 0x00
#define FMM 0x10
#define NETWORKID 0x20
#define AUTOLNCHID 0x30
#define DSPLPBKID 0x40
#define DSPBCMSGID 0x10
#define ENET_MAX_SIZE 1514
#define ENET_HEADER_SIZE 14
#define CIS_NET_ADDR_OFFSET 0xff0
// MAGNEMITE specific
#define FT1000_REG_MAG_UFDR 0x0000 // Uplink FIFO Data Register.
#define FT1000_REG_MAG_UFDRL 0x0000 // Uplink FIFO Data Register low-word.
#define FT1000_REG_MAG_UFDRH 0x0002 // Uplink FIFO Data Register high-word.
#define FT1000_REG_MAG_UFER 0x0004 // Uplink FIFO End Register
#define FT1000_REG_MAG_UFSR 0x0006 // Uplink FIFO Status Register
#define FT1000_REG_MAG_DFR 0x0008 // Downlink FIFO Register
#define FT1000_REG_MAG_DFRL 0x0008 // Downlink FIFO Register low-word
#define FT1000_REG_MAG_DFRH 0x000a // Downlink FIFO Register high-word
#define FT1000_REG_MAG_DFSR 0x000c // Downlink FIFO Status Register
#define FT1000_REG_MAG_DPDATA 0x0010 // Dual Port RAM Indirect Data Register
#define FT1000_REG_MAG_DPDATAL 0x0010 // Dual Port RAM Indirect Data Register low-word
#define FT1000_REG_MAG_DPDATAH 0x0012 // Dual Port RAM Indirect Data Register high-word
#define FT1000_REG_MAG_WATERMARK 0x002c // Supv. Control Reg. LLC register
#define FT1000_REG_MAG_VERSION 0x0030 // LLC Version LLC register
// Common
#define FT1000_REG_DPRAM_ADDR 0x000E // DPRAM ADDRESS when card in IO mode
#define FT1000_REG_SUP_CTRL 0x0020 // Supv. Control Reg. LLC register
#define FT1000_REG_SUP_STAT 0x0022 // Supv. Status Reg LLC register
#define FT1000_REG_RESET 0x0024 // Reset Reg LLC register
#define FT1000_REG_SUP_ISR 0x0026 // Supv ISR LLC register
#define FT1000_REG_SUP_IMASK 0x0028 // Supervisor Interrupt Mask LLC register
#define FT1000_REG_DOORBELL 0x002a // Door Bell Reg LLC register
#define FT1000_REG_ASIC_ID 0x002e // ASIC Identification Number
// (Electrabuzz=0 Magnemite=TBD)
// DSP doorbells
#define FT1000_DB_DPRAM_RX 0x0001 // this value indicates that DSP has
// data for host in DPRAM SlowQ
#define FT1000_DB_DNLD_RX 0x0002 // Downloader handshake doorbell
#define FT1000_ASIC_RESET_REQ 0x0004
#define FT1000_DSP_ASIC_RESET 0x0008
#define FT1000_DB_COND_RESET 0x0010
// Host doorbells
#define FT1000_DB_DPRAM_TX 0x0100 // this value indicates that host has
// data for DSP in DPRAM.
#define FT1000_DB_DNLD_TX 0x0200 // Downloader handshake doorbell
#define FT1000_ASIC_RESET_DSP 0x0400
#define FT1000_DB_HB 0x1000 // this value indicates that supervisor
// Electrabuzz specific DPRAM mapping // has a heartbeat message for DSP.
#define FT1000_DPRAM_BASE 0x1000 // 0x0000 to 0x07FF DPRAM 2Kx16 - R/W from PCMCIA or DSP
#define FT1000_DPRAM_TX_BASE 0x1002 // TX AREA (SlowQ)
#define FT1000_DPRAM_RX_BASE 0x1800 // RX AREA (SlowQ)
#define FT1000_DPRAM_SIZE 0x1000 // 4K bytes
#define FT1000_DRV_DEBUG 0x17E0 // Debug area for driver
#define FT1000_FIFO_LEN 0x17FC // total length for DSP FIFO tracking
#define FT1000_HI_HO 0x17FE // heartbeat with HI/HO
#define FT1000_DSP_STATUS 0x1FFE // dsp status - non-zero is a request to reset dsp
#define FT1000_DSP_CON_STATE 0x1FF8 // DSP Connection Status Info
#define FT1000_DSP_LEDS 0x1FFA // DSP LEDS for rcv pwr strength, Rx data, Tx data
#define DSP_TIMESTAMP 0x1FFC // dsp timestamp
#define DSP_TIMESTAMP_DIFF 0x1FFA // difference of dsp timestamp in DPRAM and Pseudo header.
#define FT1000_DPRAM_FEFE 0x1002 // Dsp Downloader handshake location
#define FT1000_DSP_TIMER0 0x1FF0
#define FT1000_DSP_TIMER1 0x1FF2
#define FT1000_DSP_TIMER2 0x1FF4
#define FT1000_DSP_TIMER3 0x1FF6
/* Electrabuzz specific DPRAM mapping */
/* this is used by ft1000_usb driver - isn't that a bug? */
#undef FT1000_DPRAM_RX_BASE
#define FT1000_DPRAM_RX_BASE 0x1800 /* RX AREA (SlowQ) */
// MEMORY MAP FOR MAGNEMITE
#define FT1000_DPRAM_MAG_TX_BASE 0x0000 // TX AREA (SlowQ)
#define FT1000_DPRAM_MAG_RX_BASE 0x0200 // RX AREA (SlowQ)
#define FT1000_MAG_FIFO_LEN 0x1FF // total length for DSP FIFO tracking
#define FT1000_MAG_FIFO_LEN_INDX 0x1 // low-word index
#define FT1000_MAG_HI_HO 0x1FF // heartbeat with HI/HO
#define FT1000_MAG_HI_HO_INDX 0x0 // high-word index
#define FT1000_MAG_DSP_LEDS 0x3FE // dsp led status for PAD device
#define FT1000_MAG_DSP_LEDS_INDX 0x1 // dsp led status for PAD device
#define FT1000_MAG_DSP_CON_STATE 0x3FE // DSP Connection Status Info
#define FT1000_MAG_DSP_CON_STATE_INDX 0x0 // DSP Connection Status Info
#define FT1000_MAG_DPRAM_FEFE 0x000 // location for dsp ready indicator
#define FT1000_MAG_DPRAM_FEFE_INDX 0x0 // location for dsp ready indicator
#define FT1000_MAG_DSP_TIMER0 0x3FC
#define FT1000_MAG_DSP_TIMER0_INDX 0x1
#define FT1000_MAG_DSP_TIMER1 0x3FC
#define FT1000_MAG_DSP_TIMER1_INDX 0x0
#define FT1000_MAG_DSP_TIMER2 0x3FD
#define FT1000_MAG_DSP_TIMER2_INDX 0x1
#define FT1000_MAG_DSP_TIMER3 0x3FD
#define FT1000_MAG_DSP_TIMER3_INDX 0x0
#define FT1000_MAG_TOTAL_LEN 0x200
#define FT1000_MAG_TOTAL_LEN_INDX 0x1
#define FT1000_MAG_PH_LEN 0x200
#define FT1000_MAG_PH_LEN_INDX 0x0
#define FT1000_MAG_PORT_ID 0x201
#define FT1000_MAG_PORT_ID_INDX 0x0
//
// Constants for the FT1000_REG_SUP_ISR
//
// Indicate the cause of an interrupt.
//
// SUPERVISOR ISR BIT MAPS
#define ISR_EMPTY (u8)0x00 // no bits set in ISR
#define ISR_DOORBELL_ACK (u8)0x01 // the doorbell i sent has been received.
#define ISR_DOORBELL_PEND (u8)0x02 // doorbell for me
#define ISR_RCV (u8)0x04 // packet received with no errors
#define ISR_WATERMARK (u8)0x08 //
// Interrupt mask register defines
// note these are different from the ISR BIT MAPS.
#define ISR_MASK_NONE 0x0000
#define ISR_MASK_DOORBELL_ACK 0x0001
#define ISR_MASK_DOORBELL_PEND 0x0002
#define ISR_MASK_RCV 0x0004
#define ISR_MASK_WATERMARK 0x0008 // Normally we will only mask the watermark interrupt when we want to enable interrupts.
#define ISR_MASK_ALL 0xffff
#define HOST_INTF_LE 0x0000 // Host interface little endian
#define HOST_INTF_BE 0x0001 // Host interface big endian
#define ISR_DEFAULT_MASK 0x7ff9
#define hi 0x6869
#define ho 0x686f
#define FT1000_ASIC_RESET 0x80 // COR value for soft reset to PCMCIA core
#define FT1000_ASIC_BITS 0x51 // Bits set in COR register under normal operation
#define FT1000_ASIC_MAG_BITS 0x55 // Bits set in COR register under normal operation
#define FT1000_COR_OFFSET 0x100
#define ELECTRABUZZ_ID 0 // ASIC ID for ELECTRABUZZ
#define MAGNEMITE_ID 0x1a01 // ASIC ID for MAGNEMITE
/* the indexes are swapped comparing to PCMCIA - is it OK or a bug? */
#undef FT1000_MAG_DSP_LED_INDX
#define FT1000_MAG_DSP_LED_INDX 0x1 /* dsp led status for PAD device */
#undef FT1000_MAG_DSP_CON_STATE_INDX
#define FT1000_MAG_DSP_CON_STATE_INDX 0x0 /* DSP Connection Status Info */
// Maximum times trying to get ASIC out of reset
#define MAX_ASIC_RESET_CNT 20
#define DSP_RESET_BIT 0x1
#define ASIC_RESET_BIT 0x2
#define DSP_UNENCRYPTED 0x4
#define DSP_ENCRYPTED 0x8
#define EFUSE_MEM_DISABLE 0x0040
#define MAX_BUF_SIZE 4096
struct drv_msg {
struct pseudo_hdr pseudo;
u16 type;
u16 length;
u8 data[0];
} __attribute__ ((packed));
struct ft1000_device
{
struct usb_device *dev;

View File

@ -0,0 +1,252 @@
/*
* Common structures and definitions for FT1000 Flarion Flash OFDM PCMCIA and USB devices
*
* Originally copyright (c) 2002 Flarion Technologies
*
*/
#define DSPVERSZ 4
#define HWSERNUMSZ 16
#define SKUSZ 20
#define EUISZ 8
#define MODESZ 2
#define CALVERSZ 2
#define CALDATESZ 6
#define ELECTRABUZZ_ID 0 /* ASIC ID for Electrabuzz */
#define MAGNEMITE_ID 0x1a01 /* ASIC ID for Magnemite */
/* MEMORY MAP common to both ELECTRABUZZ and MAGNEMITE */
#define FT1000_REG_DPRAM_ADDR 0x000E /* DPADR - Dual Port Ram Indirect Address Register */
#define FT1000_REG_SUP_CTRL 0x0020 /* HCTR - Host Control Register */
#define FT1000_REG_SUP_STAT 0x0022 /* HSTAT - Host Status Register */
#define FT1000_REG_RESET 0x0024 /* HCTR - Host Control Register */
#define FT1000_REG_SUP_ISR 0x0026 /* HISR - Host Interrupt Status Register */
#define FT1000_REG_SUP_IMASK 0x0028 /* HIMASK - Host Interrupt Mask */
#define FT1000_REG_DOORBELL 0x002a /* DBELL - Door Bell Register */
#define FT1000_REG_ASIC_ID 0x002e /* ASICID - ASIC Identification Number */
/* MEMORY MAP FOR ELECTRABUZZ ASIC */
#define FT1000_REG_UFIFO_STAT 0x0000 /* UFSR - Uplink FIFO status register */
#define FT1000_REG_UFIFO_BEG 0x0002 /* UFBR - Uplink FIFO beginning register */
#define FT1000_REG_UFIFO_MID 0x0004 /* UFMR - Uplink FIFO middle register */
#define FT1000_REG_UFIFO_END 0x0006 /* UFER - Uplink FIFO end register */
#define FT1000_REG_DFIFO_STAT 0x0008 /* DFSR - Downlink FIFO status register */
#define FT1000_REG_DFIFO 0x000A /* DFR - Downlink FIFO Register */
#define FT1000_REG_DPRAM_DATA 0x000C /* DPRAM - Dual Port Indirect Data Register */
#define FT1000_REG_WATERMARK 0x0010 /* WMARK - Watermark Register */
/* MEMORY MAP FOR MAGNEMITE */
#define FT1000_REG_MAG_UFDR 0x0000 /* UFDR - Uplink FIFO Data Register (32-bits) */
#define FT1000_REG_MAG_UFDRL 0x0000 /* UFDRL - Uplink FIFO Data Register low-word (16-bits) */
#define FT1000_REG_MAG_UFDRH 0x0002 /* UFDRH - Uplink FIFO Data Register high-word (16-bits) */
#define FT1000_REG_MAG_UFER 0x0004 /* UFER - Uplink FIFO End Register */
#define FT1000_REG_MAG_UFSR 0x0006 /* UFSR - Uplink FIFO Status Register */
#define FT1000_REG_MAG_DFR 0x0008 /* DFR - Downlink FIFO Register (32-bits) */
#define FT1000_REG_MAG_DFRL 0x0008 /* DFRL - Downlink FIFO Register low-word (16-bits) */
#define FT1000_REG_MAG_DFRH 0x000a /* DFRH - Downlink FIFO Register high-word (16-bits) */
#define FT1000_REG_MAG_DFSR 0x000c /* DFSR - Downlink FIFO Status Register */
#define FT1000_REG_MAG_DPDATA 0x0010 /* DPDATA - Dual Port RAM Indirect Data Register (32-bits) */
#define FT1000_REG_MAG_DPDATAL 0x0010 /* DPDATAL - Dual Port RAM Indirect Data Register low-word (16-bits) */
#define FT1000_REG_MAG_DPDATAH 0x0012 /* DPDATAH - Dual Port RAM Indirect Data Register high-word (16-bits) */
#define FT1000_REG_MAG_WATERMARK 0x002c /* WMARK - Watermark Register */
#define FT1000_REG_MAG_VERSION 0x0030 /* LLC Version */
/* Reserved Dual Port RAM offsets for Electrabuzz */
#define FT1000_DPRAM_TX_BASE 0x0002 /* Host to PC Card Messaging Area */
#define FT1000_DPRAM_RX_BASE 0x0800 /* PC Card to Host Messaging Area */
#define FT1000_FIFO_LEN 0x07FC /* total length for DSP FIFO tracking */
#define FT1000_HI_HO 0x07FE /* heartbeat with HI/HO */
#define FT1000_DSP_STATUS 0x0FFE /* dsp status - non-zero is a request to reset dsp */
#define FT1000_DSP_LED 0x0FFA /* dsp led status for PAD device */
#define FT1000_DSP_CON_STATE 0x0FF8 /* DSP Connection Status Info */
#define FT1000_DPRAM_FEFE 0x0002 /* location for dsp ready indicator */
#define FT1000_DSP_TIMER0 0x1FF0 /* Timer Field from Basestation */
#define FT1000_DSP_TIMER1 0x1FF2 /* Timer Field from Basestation */
#define FT1000_DSP_TIMER2 0x1FF4 /* Timer Field from Basestation */
#define FT1000_DSP_TIMER3 0x1FF6 /* Timer Field from Basestation */
/* Reserved Dual Port RAM offsets for Magnemite */
#define FT1000_DPRAM_MAG_TX_BASE 0x0000 /* Host to PC Card Messaging Area */
#define FT1000_DPRAM_MAG_RX_BASE 0x0200 /* PC Card to Host Messaging Area */
#define FT1000_MAG_FIFO_LEN 0x1FF /* total length for DSP FIFO tracking */
#define FT1000_MAG_FIFO_LEN_INDX 0x1 /* low-word index */
#define FT1000_MAG_HI_HO 0x1FF /* heartbeat with HI/HO */
#define FT1000_MAG_HI_HO_INDX 0x0 /* high-word index */
#define FT1000_MAG_DSP_LED 0x3FE /* dsp led status for PAD device */
#define FT1000_MAG_DSP_LED_INDX 0x0 /* dsp led status for PAD device */
#define FT1000_MAG_DSP_CON_STATE 0x3FE /* DSP Connection Status Info */
#define FT1000_MAG_DSP_CON_STATE_INDX 0x1 /* DSP Connection Status Info */
#define FT1000_MAG_DPRAM_FEFE 0x000 /* location for dsp ready indicator */
#define FT1000_MAG_DPRAM_FEFE_INDX 0x0 /* location for dsp ready indicator */
#define FT1000_MAG_DSP_TIMER0 0x3FC /* Timer Field from Basestation */
#define FT1000_MAG_DSP_TIMER0_INDX 0x1
#define FT1000_MAG_DSP_TIMER1 0x3FC /* Timer Field from Basestation */
#define FT1000_MAG_DSP_TIMER1_INDX 0x0
#define FT1000_MAG_DSP_TIMER2 0x3FD /* Timer Field from Basestation */
#define FT1000_MAG_DSP_TIMER2_INDX 0x1
#define FT1000_MAG_DSP_TIMER3 0x3FD /* Timer Field from Basestation */
#define FT1000_MAG_DSP_TIMER3_INDX 0x0
#define FT1000_MAG_TOTAL_LEN 0x200
#define FT1000_MAG_TOTAL_LEN_INDX 0x1
#define FT1000_MAG_PH_LEN 0x200
#define FT1000_MAG_PH_LEN_INDX 0x0
#define FT1000_MAG_PORT_ID 0x201
#define FT1000_MAG_PORT_ID_INDX 0x0
#define HOST_INTF_LE 0x0 /* Host interface little endian mode */
#define HOST_INTF_BE 0x1 /* Host interface big endian mode */
/* FT1000 to Host Doorbell assignments */
#define FT1000_DB_DPRAM_RX 0x0001 /* this value indicates that DSP has data for host in DPRAM */
#define FT1000_DB_DNLD_RX 0x0002 /* Downloader handshake doorbell */
#define FT1000_ASIC_RESET_REQ 0x0004 /* DSP requesting host to reset the ASIC */
#define FT1000_DSP_ASIC_RESET 0x0008 /* DSP indicating host that it will reset the ASIC */
#define FT1000_DB_COND_RESET 0x0010 /* DSP request for a card reset. */
/* Host to FT1000 Doorbell assignments */
#define FT1000_DB_DPRAM_TX 0x0100 /* this value indicates that host has data for DSP in DPRAM. */
#define FT1000_DB_DNLD_TX 0x0200 /* Downloader handshake doorbell */
#define FT1000_ASIC_RESET_DSP 0x0400 /* Responds to FT1000_ASIC_RESET_REQ */
#define FT1000_DB_HB 0x1000 /* Indicates that supervisor has a heartbeat message for DSP. */
#define hi 0x6869 /* PC Card heartbeat values */
#define ho 0x686f /* PC Card heartbeat values */
/* Magnemite specific defines */
#define hi_mag 0x6968 /* Byte swap hi to avoid additional system call */
#define ho_mag 0x6f68 /* Byte swap ho to avoid additional system call */
/* Bit field definitions for Host Interrupt Status Register */
/* Indicate the cause of an interrupt. */
#define ISR_EMPTY 0x00 /* no bits set */
#define ISR_DOORBELL_ACK 0x01 /* Doorbell acknowledge from DSP */
#define ISR_DOORBELL_PEND 0x02 /* Doorbell pending from DSP */
#define ISR_RCV 0x04 /* Packet available in Downlink FIFO */
#define ISR_WATERMARK 0x08 /* Watermark requirements satisfied */
/* Bit field definition for Host Interrupt Mask */
#define ISR_MASK_NONE 0x0000 /* no bits set */
#define ISR_MASK_DOORBELL_ACK 0x0001 /* Doorbell acknowledge mask */
#define ISR_MASK_DOORBELL_PEND 0x0002 /* Doorbell pending mask */
#define ISR_MASK_RCV 0x0004 /* Downlink Packet available mask */
#define ISR_MASK_WATERMARK 0x0008 /* Watermark interrupt mask */
#define ISR_MASK_ALL 0xffff /* Mask all interrupts */
/* Default interrupt mask (Enable Doorbell pending and Packet available interrupts) */
#define ISR_DEFAULT_MASK 0x7ff9
/* Bit field definition for Host Control Register */
#define DSP_RESET_BIT 0x0001 /* Bit field to control dsp reset state */
/* (0 = out of reset 1 = reset) */
#define ASIC_RESET_BIT 0x0002 /* Bit field to control ASIC reset state */
/* (0 = out of reset 1 = reset) */
#define DSP_UNENCRYPTED 0x0004
#define DSP_ENCRYPTED 0x0008
#define EFUSE_MEM_DISABLE 0x0040
/* Application specific IDs */
#define DSPID 0x20
#define HOSTID 0x10
#define DSPAIRID 0x90
#define DRIVERID 0x00
#define NETWORKID 0x20
/* Size of DPRAM Message */
#define MAX_CMD_SQSIZE 1780
#define ENET_MAX_SIZE 1514
#define ENET_HEADER_SIZE 14
#define SLOWQ_TYPE 0
#define FASTQ_TYPE 1
#define MAX_DSP_SESS_REC 1024
#define DSP_QID_OFFSET 4
/* Driver message types */
#define MEDIA_STATE 0x0010
#define TIME_UPDATE 0x0020
#define DSP_PROVISION 0x0030
#define DSP_INIT_MSG 0x0050
#define DSP_HIBERNATE 0x0060
#define DSP_STORE_INFO 0x0070
#define DSP_GET_INFO 0x0071
#define GET_DRV_ERR_RPT_MSG 0x0073
#define RSP_DRV_ERR_RPT_MSG 0x0074
/* Driver Error Messages for DSP */
#define DSP_HB_INFO 0x7ef0
#define DSP_FIFO_INFO 0x7ef1
#define DSP_CONDRESET_INFO 0x7ef2
#define DSP_CMDLEN_INFO 0x7ef3
#define DSP_CMDPHCKSUM_INFO 0x7ef4
#define DSP_PKTPHCKSUM_INFO 0x7ef5
#define DSP_PKTLEN_INFO 0x7ef6
#define DSP_USER_RESET 0x7ef7
#define FIFO_FLUSH_MAXLIMIT 0x7ef8
#define FIFO_FLUSH_BADCNT 0x7ef9
#define FIFO_ZERO_LEN 0x7efa
/* Pseudo Header structure */
struct pseudo_hdr {
unsigned short length; /* length of msg body */
unsigned char source; /* hardware source id */
/* Host = 0x10 */
/* Dsp = 0x20 */
unsigned char destination; /* hardware destination id (refer to source) */
unsigned char portdest; /* software destination port id */
/* Host = 0x00 */
/* Applicaton Broadcast = 0x10 */
/* Network Stack = 0x20 */
/* Dsp OAM = 0x80 */
/* Dsp Airlink = 0x90 */
/* Dsp Loader = 0xa0 */
/* Dsp MIP = 0xb0 */
unsigned char portsrc; /* software source port id (refer to portdest) */
unsigned short sh_str_id; /* not used */
unsigned char control; /* not used */
unsigned char rsvd1;
unsigned char seq_num; /* message sequence number */
unsigned char rsvd2;
unsigned short qos_class; /* not used */
unsigned short checksum; /* pseudo header checksum */
} __packed;
struct drv_msg {
struct pseudo_hdr pseudo;
u16 type;
u16 length;
u8 data[0];
} __packed;
struct media_msg {
struct pseudo_hdr pseudo;
u16 type;
u16 length;
u16 state;
u32 ip_addr;
u32 net_mask;
u32 gateway;
u32 dns_1;
u32 dns_2;
} __packed;
struct dsp_init_msg {
struct pseudo_hdr pseudo;
u16 type;
u16 length;
u8 DspVer[DSPVERSZ]; /* DSP version number */
u8 HwSerNum[HWSERNUMSZ]; /* Hardware Serial Number */
u8 Sku[SKUSZ]; /* SKU */
u8 eui64[EUISZ]; /* EUI64 */
u8 ProductMode[MODESZ]; /* Product Mode (Market/Production) */
u8 RfCalVer[CALVERSZ]; /* Rf Calibration version */
u8 RfCalDate[CALDATESZ]; /* Rf Calibration date */
} __packed;
struct prov_record {
struct list_head list;
u8 *pprov_data;
};