OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

spi/bfin_spi: handle error/status changes after data interrupts 

The error interrupt on the BF537 SIC cannot be enabled on a
per-peripheral basis.  Once the error interrupt is enabled
for one peripheral, it is automatically enabled for all.

So in the Blackfin on-chip SPI driver, we need to clear out
these known errors in the data interrupt once we've successfully
finished processing all of the pending data.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
This commit is contained in:
Michael Hennerich 2010-10-22 02:01:48 -04:00 committed by Grant Likely
parent 2b9603a0d7
commit 782a895693
1 changed files with 9 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
drivers/spi/spi_bfin5xx.c
View File

@ -504,6 +504,15 @@ static irqreturn_t bfin_spi_dma_irq_handler(int irq, void *dev_id)
"in dma_irq_handler dmastat:0x%x spistat:0x%x\n",
dmastat, spistat);
if (drv_data->rx != NULL) {
u16 cr = read_CTRL(drv_data);
/* discard old RX data and clear RXS */
bfin_spi_dummy_read(drv_data);
write_CTRL(drv_data, cr & ~BIT_CTL_ENABLE); /* Disable SPI */
write_CTRL(drv_data, cr & ~BIT_CTL_TIMOD); /* Restore State */
write_STAT(drv_data, BIT_STAT_CLR); /* Clear Status */
}
clear_dma_irqstat(drv_data->dma_channel);
/*