diff --git a/Documentation/devicetree/bindings/reset/oxnas,reset.txt b/Documentation/devicetree/bindings/reset/oxnas,reset.txt index 6f06db930030..d27ccb5d04fc 100644 --- a/Documentation/devicetree/bindings/reset/oxnas,reset.txt +++ b/Documentation/devicetree/bindings/reset/oxnas,reset.txt @@ -5,45 +5,19 @@ Please also refer to reset.txt in this directory for common reset controller binding usage. Required properties: -- compatible: Should be "oxsemi,ox810se-reset" +- compatible: For OX810SE, should be "oxsemi,ox810se-reset" + For OX820, should be "oxsemi,ox820-reset" - #reset-cells: 1, see below Parent node should have the following properties : -- compatible: Should be "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd" +- compatible: For OX810SE, should be : + "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd" + For OX820, should be : + "oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd" -For OX810SE, the indices are : - - 0 : ARM - - 1 : COPRO - - 2 : Reserved - - 3 : Reserved - - 4 : USBHS - - 5 : USBHSPHY - - 6 : MAC - - 7 : PCI - - 8 : DMA - - 9 : DPE - - 10 : DDR - - 11 : SATA - - 12 : SATA_LINK - - 13 : SATA_PHY - - 14 : Reserved - - 15 : NAND - - 16 : GPIO - - 17 : UART1 - - 18 : UART2 - - 19 : MISC - - 20 : I2S - - 21 : AHB_MON - - 22 : UART3 - - 23 : UART4 - - 24 : SGDMA - - 25 : Reserved - - 26 : Reserved - - 27 : Reserved - - 28 : Reserved - - 29 : Reserved - - 30 : Reserved - - 31 : BUS +Reset indices are in dt-bindings include files : +- For OX810SE: include/dt-bindings/reset/oxsemi,ox810se.h +- For OX820: include/dt-bindings/reset/oxsemi,ox820.h example: diff --git a/Documentation/devicetree/bindings/reset/st,sti-softreset.txt b/Documentation/devicetree/bindings/reset/st,sti-softreset.txt index 891a2fd85ed6..a21658f18fe6 100644 --- a/Documentation/devicetree/bindings/reset/st,sti-softreset.txt +++ b/Documentation/devicetree/bindings/reset/st,sti-softreset.txt @@ -15,15 +15,14 @@ Please refer to reset.txt in this directory for common reset controller binding usage. Required properties: -- compatible: Should be "st,-softreset" example: - "st,stih415-softreset" or "st,stih416-softreset"; +- compatible: Should be st,stih407-softreset"; - #reset-cells: 1, see below example: softreset: softreset-controller { #reset-cells = <1>; - compatible = "st,stih415-softreset"; + compatible = "st,stih407-softreset"; }; @@ -42,5 +41,4 @@ example: Macro definitions for the supported reset channels can be found in: -include/dt-bindings/reset/stih415-resets.h -include/dt-bindings/reset/stih416-resets.h +include/dt-bindings/reset/stih407-resets.h diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig index 119e1108b1f8..f8eeeffddaff 100644 --- a/arch/arm/mach-sti/Kconfig +++ b/arch/arm/mach-sti/Kconfig @@ -28,7 +28,6 @@ if ARCH_STI config SOC_STIH415 bool "STiH415 STMicroelectronics Consumer Electronics family" default y - select STIH415_RESET help This enables support for STMicroelectronics Digital Consumer Electronics family StiH415 parts, primarily targeted at set-top-box @@ -38,7 +37,6 @@ config SOC_STIH415 config SOC_STIH416 bool "STiH416 STMicroelectronics Consumer Electronics family" default y - select STIH416_RESET help This enables support for STMicroelectronics Digital Consumer Electronics family StiH416 parts, primarily targeted at set-top-box diff --git a/drivers/reset/core.c b/drivers/reset/core.c index b8ae1dbd4c17..10368ed8fd13 100644 --- a/drivers/reset/core.c +++ b/drivers/reset/core.c @@ -32,6 +32,9 @@ static LIST_HEAD(reset_controller_list); * @refcnt: Number of gets of this reset_control * @shared: Is this a shared (1), or an exclusive (0) reset_control? * @deassert_cnt: Number of times this reset line has been deasserted + * @triggered_count: Number of times this reset line has been reset. Currently + * only used for shared resets, which means that the value + * will be either 0 or 1. */ struct reset_control { struct reset_controller_dev *rcdev; @@ -40,6 +43,7 @@ struct reset_control { unsigned int refcnt; int shared; atomic_t deassert_count; + atomic_t triggered_count; }; /** @@ -134,18 +138,35 @@ EXPORT_SYMBOL_GPL(devm_reset_controller_register); * reset_control_reset - reset the controlled device * @rstc: reset controller * - * Calling this on a shared reset controller is an error. + * On a shared reset line the actual reset pulse is only triggered once for the + * lifetime of the reset_control instance: for all but the first caller this is + * a no-op. + * Consumers must not use reset_control_(de)assert on shared reset lines when + * reset_control_reset has been used. */ int reset_control_reset(struct reset_control *rstc) { - if (WARN_ON(IS_ERR_OR_NULL(rstc)) || - WARN_ON(rstc->shared)) + int ret; + + if (WARN_ON(IS_ERR_OR_NULL(rstc))) return -EINVAL; - if (rstc->rcdev->ops->reset) - return rstc->rcdev->ops->reset(rstc->rcdev, rstc->id); + if (!rstc->rcdev->ops->reset) + return -ENOTSUPP; - return -ENOTSUPP; + if (rstc->shared) { + if (WARN_ON(atomic_read(&rstc->deassert_count) != 0)) + return -EINVAL; + + if (atomic_inc_return(&rstc->triggered_count) != 1) + return 0; + } + + ret = rstc->rcdev->ops->reset(rstc->rcdev, rstc->id); + if (rstc->shared && !ret) + atomic_dec(&rstc->triggered_count); + + return ret; } EXPORT_SYMBOL_GPL(reset_control_reset); @@ -159,6 +180,8 @@ EXPORT_SYMBOL_GPL(reset_control_reset); * * For shared reset controls a driver cannot expect the hw's registers and * internal state to be reset, but must be prepared for this to happen. + * Consumers must not use reset_control_reset on shared reset lines when + * reset_control_(de)assert has been used. */ int reset_control_assert(struct reset_control *rstc) { @@ -169,6 +192,9 @@ int reset_control_assert(struct reset_control *rstc) return -ENOTSUPP; if (rstc->shared) { + if (WARN_ON(atomic_read(&rstc->triggered_count) != 0)) + return -EINVAL; + if (WARN_ON(atomic_read(&rstc->deassert_count) == 0)) return -EINVAL; @@ -185,6 +211,8 @@ EXPORT_SYMBOL_GPL(reset_control_assert); * @rstc: reset controller * * After calling this function, the reset is guaranteed to be deasserted. + * Consumers must not use reset_control_reset on shared reset lines when + * reset_control_(de)assert has been used. */ int reset_control_deassert(struct reset_control *rstc) { @@ -195,6 +223,9 @@ int reset_control_deassert(struct reset_control *rstc) return -ENOTSUPP; if (rstc->shared) { + if (WARN_ON(atomic_read(&rstc->triggered_count) != 0)) + return -EINVAL; + if (atomic_inc_return(&rstc->deassert_count) != 1) return 0; } diff --git a/drivers/reset/reset-berlin.c b/drivers/reset/reset-berlin.c index 369f3917fd8e..371197bbd055 100644 --- a/drivers/reset/reset-berlin.c +++ b/drivers/reset/reset-berlin.c @@ -1,6 +1,8 @@ /* * Copyright (C) 2014 Marvell Technology Group Ltd. * + * Marvell Berlin reset driver + * * Antoine Tenart * Sebastian Hesselbarth * @@ -12,7 +14,7 @@ #include #include #include -#include +#include #include #include #include @@ -91,7 +93,6 @@ static const struct of_device_id berlin_reset_dt_match[] = { { .compatible = "marvell,berlin2-reset" }, { }, }; -MODULE_DEVICE_TABLE(of, berlin_reset_dt_match); static struct platform_driver berlin_reset_driver = { .probe = berlin2_reset_probe, @@ -100,9 +101,4 @@ static struct platform_driver berlin_reset_driver = { .of_match_table = berlin_reset_dt_match, }, }; -module_platform_driver(berlin_reset_driver); - -MODULE_AUTHOR("Antoine Tenart "); -MODULE_AUTHOR("Sebastian Hesselbarth "); -MODULE_DESCRIPTION("Marvell Berlin reset driver"); -MODULE_LICENSE("GPL"); +builtin_platform_driver(berlin_reset_driver); diff --git a/drivers/reset/reset-lpc18xx.c b/drivers/reset/reset-lpc18xx.c index 54cca0055171..a62ad52e262b 100644 --- a/drivers/reset/reset-lpc18xx.c +++ b/drivers/reset/reset-lpc18xx.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include #include #include @@ -218,39 +218,17 @@ dis_clk_reg: return ret; } -static int lpc18xx_rgu_remove(struct platform_device *pdev) -{ - struct lpc18xx_rgu_data *rc = platform_get_drvdata(pdev); - int ret; - - ret = unregister_restart_handler(&rc->restart_nb); - if (ret) - dev_warn(&pdev->dev, "failed to unregister restart handler\n"); - - reset_controller_unregister(&rc->rcdev); - - clk_disable_unprepare(rc->clk_delay); - clk_disable_unprepare(rc->clk_reg); - - return 0; -} - static const struct of_device_id lpc18xx_rgu_match[] = { { .compatible = "nxp,lpc1850-rgu" }, { } }; -MODULE_DEVICE_TABLE(of, lpc18xx_rgu_match); static struct platform_driver lpc18xx_rgu_driver = { .probe = lpc18xx_rgu_probe, - .remove = lpc18xx_rgu_remove, .driver = { - .name = "lpc18xx-reset", - .of_match_table = lpc18xx_rgu_match, + .name = "lpc18xx-reset", + .of_match_table = lpc18xx_rgu_match, + .suppress_bind_attrs = true, }, }; -module_platform_driver(lpc18xx_rgu_driver); - -MODULE_AUTHOR("Joachim Eastwood "); -MODULE_DESCRIPTION("Reset driver for LPC18xx/43xx RGU"); -MODULE_LICENSE("GPL v2"); +builtin_platform_driver(lpc18xx_rgu_driver); diff --git a/drivers/reset/reset-oxnas.c b/drivers/reset/reset-oxnas.c index 944980572f79..0d9036dea010 100644 --- a/drivers/reset/reset-oxnas.c +++ b/drivers/reset/reset-oxnas.c @@ -80,6 +80,7 @@ static const struct reset_control_ops oxnas_reset_ops = { static const struct of_device_id oxnas_reset_dt_ids[] = { { .compatible = "oxsemi,ox810se-reset", }, + { .compatible = "oxsemi,ox820-reset", }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, oxnas_reset_dt_ids); diff --git a/drivers/reset/reset-socfpga.c b/drivers/reset/reset-socfpga.c index 78ebf8424375..43e4a9f39b9b 100644 --- a/drivers/reset/reset-socfpga.c +++ b/drivers/reset/reset-socfpga.c @@ -1,4 +1,6 @@ /* + * Socfpga Reset Controller Driver + * * Copyright 2014 Steffen Trumtrar * * based on @@ -16,7 +18,7 @@ #include #include -#include +#include #include #include #include @@ -148,8 +150,4 @@ static struct platform_driver socfpga_reset_driver = { .of_match_table = socfpga_reset_dt_ids, }, }; -module_platform_driver(socfpga_reset_driver); - -MODULE_AUTHOR("Steffen Trumtrar #include -#include +#include #include #include #include @@ -142,7 +142,6 @@ static const struct of_device_id sunxi_reset_dt_ids[] = { { .compatible = "allwinner,sun6i-a31-clock-reset", }, { /* sentinel */ }, }; -MODULE_DEVICE_TABLE(of, sunxi_reset_dt_ids); static int sunxi_reset_probe(struct platform_device *pdev) { @@ -175,8 +174,4 @@ static struct platform_driver sunxi_reset_driver = { .of_match_table = sunxi_reset_dt_ids, }, }; -module_platform_driver(sunxi_reset_driver); - -MODULE_AUTHOR("Maxime Ripard + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. @@ -15,7 +17,7 @@ #include #include -#include +#include #include #include #include @@ -137,8 +139,4 @@ static struct platform_driver zynq_reset_driver = { .of_match_table = zynq_reset_dt_ids, }, }; -module_platform_driver(zynq_reset_driver); - -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Moritz Fischer "); -MODULE_DESCRIPTION("Zynq Reset Controller Driver"); +builtin_platform_driver(zynq_reset_driver); diff --git a/drivers/reset/sti/Kconfig b/drivers/reset/sti/Kconfig index 613178553612..71592b5bfd14 100644 --- a/drivers/reset/sti/Kconfig +++ b/drivers/reset/sti/Kconfig @@ -3,14 +3,6 @@ if ARCH_STI config STI_RESET_SYSCFG bool -config STIH415_RESET - bool - select STI_RESET_SYSCFG - -config STIH416_RESET - bool - select STI_RESET_SYSCFG - config STIH407_RESET bool select STI_RESET_SYSCFG diff --git a/drivers/reset/sti/Makefile b/drivers/reset/sti/Makefile index dc85dfbe56a9..f9d82411f29e 100644 --- a/drivers/reset/sti/Makefile +++ b/drivers/reset/sti/Makefile @@ -1,5 +1,3 @@ obj-$(CONFIG_STI_RESET_SYSCFG) += reset-syscfg.o -obj-$(CONFIG_STIH415_RESET) += reset-stih415.o -obj-$(CONFIG_STIH416_RESET) += reset-stih416.o obj-$(CONFIG_STIH407_RESET) += reset-stih407.o diff --git a/drivers/reset/sti/reset-stih415.c b/drivers/reset/sti/reset-stih415.c deleted file mode 100644 index 6f220cdbef46..000000000000 --- a/drivers/reset/sti/reset-stih415.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * Copyright (C) 2013 STMicroelectronics (R&D) Limited - * Author: Stephen Gallimore - * Author: Srinivas Kandagatla - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#include -#include -#include -#include - -#include - -#include "reset-syscfg.h" - -/* - * STiH415 Peripheral powerdown definitions. - */ -static const char stih415_front[] = "st,stih415-front-syscfg"; -static const char stih415_rear[] = "st,stih415-rear-syscfg"; -static const char stih415_sbc[] = "st,stih415-sbc-syscfg"; -static const char stih415_lpm[] = "st,stih415-lpm-syscfg"; - -#define STIH415_PDN_FRONT(_bit) \ - _SYSCFG_RST_CH(stih415_front, SYSCFG_114, _bit, SYSSTAT_187, _bit) - -#define STIH415_PDN_REAR(_cntl, _stat) \ - _SYSCFG_RST_CH(stih415_rear, SYSCFG_336, _cntl, SYSSTAT_384, _stat) - -#define STIH415_SRST_REAR(_reg, _bit) \ - _SYSCFG_RST_CH_NO_ACK(stih415_rear, _reg, _bit) - -#define STIH415_SRST_SBC(_reg, _bit) \ - _SYSCFG_RST_CH_NO_ACK(stih415_sbc, _reg, _bit) - -#define STIH415_SRST_FRONT(_reg, _bit) \ - _SYSCFG_RST_CH_NO_ACK(stih415_front, _reg, _bit) - -#define STIH415_SRST_LPM(_reg, _bit) \ - _SYSCFG_RST_CH_NO_ACK(stih415_lpm, _reg, _bit) - -#define SYSCFG_114 0x38 /* Powerdown request EMI/NAND/Keyscan */ -#define SYSSTAT_187 0x15c /* Powerdown status EMI/NAND/Keyscan */ - -#define SYSCFG_336 0x90 /* Powerdown request USB/SATA/PCIe */ -#define SYSSTAT_384 0x150 /* Powerdown status USB/SATA/PCIe */ - -#define SYSCFG_376 0x130 /* Reset generator 0 control 0 */ -#define SYSCFG_166 0x108 /* Softreset Ethernet 0 */ -#define SYSCFG_31 0x7c /* Softreset Ethernet 1 */ -#define LPM_SYSCFG_1 0x4 /* Softreset IRB */ - -static const struct syscfg_reset_channel_data stih415_powerdowns[] = { - [STIH415_EMISS_POWERDOWN] = STIH415_PDN_FRONT(0), - [STIH415_NAND_POWERDOWN] = STIH415_PDN_FRONT(1), - [STIH415_KEYSCAN_POWERDOWN] = STIH415_PDN_FRONT(2), - [STIH415_USB0_POWERDOWN] = STIH415_PDN_REAR(0, 0), - [STIH415_USB1_POWERDOWN] = STIH415_PDN_REAR(1, 1), - [STIH415_USB2_POWERDOWN] = STIH415_PDN_REAR(2, 2), - [STIH415_SATA0_POWERDOWN] = STIH415_PDN_REAR(3, 3), - [STIH415_SATA1_POWERDOWN] = STIH415_PDN_REAR(4, 4), - [STIH415_PCIE_POWERDOWN] = STIH415_PDN_REAR(5, 8), -}; - -static const struct syscfg_reset_channel_data stih415_softresets[] = { - [STIH415_ETH0_SOFTRESET] = STIH415_SRST_FRONT(SYSCFG_166, 0), - [STIH415_ETH1_SOFTRESET] = STIH415_SRST_SBC(SYSCFG_31, 0), - [STIH415_IRB_SOFTRESET] = STIH415_SRST_LPM(LPM_SYSCFG_1, 6), - [STIH415_USB0_SOFTRESET] = STIH415_SRST_REAR(SYSCFG_376, 9), - [STIH415_USB1_SOFTRESET] = STIH415_SRST_REAR(SYSCFG_376, 10), - [STIH415_USB2_SOFTRESET] = STIH415_SRST_REAR(SYSCFG_376, 11), - [STIH415_KEYSCAN_SOFTRESET] = STIH415_SRST_LPM(LPM_SYSCFG_1, 8), -}; - -static struct syscfg_reset_controller_data stih415_powerdown_controller = { - .wait_for_ack = true, - .nr_channels = ARRAY_SIZE(stih415_powerdowns), - .channels = stih415_powerdowns, -}; - -static struct syscfg_reset_controller_data stih415_softreset_controller = { - .wait_for_ack = false, - .active_low = true, - .nr_channels = ARRAY_SIZE(stih415_softresets), - .channels = stih415_softresets, -}; - -static const struct of_device_id stih415_reset_match[] = { - { .compatible = "st,stih415-powerdown", - .data = &stih415_powerdown_controller, }, - { .compatible = "st,stih415-softreset", - .data = &stih415_softreset_controller, }, - {}, -}; - -static struct platform_driver stih415_reset_driver = { - .probe = syscfg_reset_probe, - .driver = { - .name = "reset-stih415", - .of_match_table = stih415_reset_match, - }, -}; - -static int __init stih415_reset_init(void) -{ - return platform_driver_register(&stih415_reset_driver); -} -arch_initcall(stih415_reset_init); diff --git a/drivers/reset/sti/reset-stih416.c b/drivers/reset/sti/reset-stih416.c deleted file mode 100644 index c581d606ef0f..000000000000 --- a/drivers/reset/sti/reset-stih416.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * Copyright (C) 2013 STMicroelectronics (R&D) Limited - * Author: Stephen Gallimore - * Author: Srinivas Kandagatla - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#include -#include -#include -#include - -#include - -#include "reset-syscfg.h" - -/* - * STiH416 Peripheral powerdown definitions. - */ -static const char stih416_front[] = "st,stih416-front-syscfg"; -static const char stih416_rear[] = "st,stih416-rear-syscfg"; -static const char stih416_sbc[] = "st,stih416-sbc-syscfg"; -static const char stih416_lpm[] = "st,stih416-lpm-syscfg"; -static const char stih416_cpu[] = "st,stih416-cpu-syscfg"; - -#define STIH416_PDN_FRONT(_bit) \ - _SYSCFG_RST_CH(stih416_front, SYSCFG_1500, _bit, SYSSTAT_1578, _bit) - -#define STIH416_PDN_REAR(_cntl, _stat) \ - _SYSCFG_RST_CH(stih416_rear, SYSCFG_2525, _cntl, SYSSTAT_2583, _stat) - -#define SYSCFG_1500 0x7d0 /* Powerdown request EMI/NAND/Keyscan */ -#define SYSSTAT_1578 0x908 /* Powerdown status EMI/NAND/Keyscan */ - -#define SYSCFG_2525 0x834 /* Powerdown request USB/SATA/PCIe */ -#define SYSSTAT_2583 0x91c /* Powerdown status USB/SATA/PCIe */ - -#define SYSCFG_2552 0x8A0 /* Reset Generator control 0 */ -#define SYSCFG_1539 0x86c /* Softreset Ethernet 0 */ -#define SYSCFG_510 0x7f8 /* Softreset Ethernet 1 */ -#define LPM_SYSCFG_1 0x4 /* Softreset IRB */ -#define SYSCFG_2553 0x8a4 /* Softreset SATA0/1, PCIE0/1 */ -#define SYSCFG_7563 0x8cc /* MPE softresets 0 */ -#define SYSCFG_7564 0x8d0 /* MPE softresets 1 */ - -#define STIH416_SRST_CPU(_reg, _bit) \ - _SYSCFG_RST_CH_NO_ACK(stih416_cpu, _reg, _bit) - -#define STIH416_SRST_FRONT(_reg, _bit) \ - _SYSCFG_RST_CH_NO_ACK(stih416_front, _reg, _bit) - -#define STIH416_SRST_REAR(_reg, _bit) \ - _SYSCFG_RST_CH_NO_ACK(stih416_rear, _reg, _bit) - -#define STIH416_SRST_LPM(_reg, _bit) \ - _SYSCFG_RST_CH_NO_ACK(stih416_lpm, _reg, _bit) - -#define STIH416_SRST_SBC(_reg, _bit) \ - _SYSCFG_RST_CH_NO_ACK(stih416_sbc, _reg, _bit) - -static const struct syscfg_reset_channel_data stih416_powerdowns[] = { - [STIH416_EMISS_POWERDOWN] = STIH416_PDN_FRONT(0), - [STIH416_NAND_POWERDOWN] = STIH416_PDN_FRONT(1), - [STIH416_KEYSCAN_POWERDOWN] = STIH416_PDN_FRONT(2), - [STIH416_USB0_POWERDOWN] = STIH416_PDN_REAR(0, 0), - [STIH416_USB1_POWERDOWN] = STIH416_PDN_REAR(1, 1), - [STIH416_USB2_POWERDOWN] = STIH416_PDN_REAR(2, 2), - [STIH416_USB3_POWERDOWN] = STIH416_PDN_REAR(6, 5), - [STIH416_SATA0_POWERDOWN] = STIH416_PDN_REAR(3, 3), - [STIH416_SATA1_POWERDOWN] = STIH416_PDN_REAR(4, 4), - [STIH416_PCIE0_POWERDOWN] = STIH416_PDN_REAR(7, 9), - [STIH416_PCIE1_POWERDOWN] = STIH416_PDN_REAR(5, 8), -}; - -static const struct syscfg_reset_channel_data stih416_softresets[] = { - [STIH416_ETH0_SOFTRESET] = STIH416_SRST_FRONT(SYSCFG_1539, 0), - [STIH416_ETH1_SOFTRESET] = STIH416_SRST_SBC(SYSCFG_510, 0), - [STIH416_IRB_SOFTRESET] = STIH416_SRST_LPM(LPM_SYSCFG_1, 6), - [STIH416_USB0_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 9), - [STIH416_USB1_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 10), - [STIH416_USB2_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 11), - [STIH416_USB3_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 28), - [STIH416_SATA0_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 7), - [STIH416_SATA1_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 3), - [STIH416_PCIE0_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 15), - [STIH416_PCIE1_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 2), - [STIH416_AUD_DAC_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 14), - [STIH416_HDTVOUT_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 5), - [STIH416_VTAC_M_RX_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 25), - [STIH416_VTAC_A_RX_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 26), - [STIH416_SYNC_HD_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 5), - [STIH416_SYNC_SD_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 6), - [STIH416_BLITTER_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7563, 10), - [STIH416_GPU_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7563, 11), - [STIH416_VTAC_M_TX_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7563, 18), - [STIH416_VTAC_A_TX_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7563, 19), - [STIH416_VTG_AUX_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7563, 21), - [STIH416_JPEG_DEC_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7563, 23), - [STIH416_HVA_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7564, 2), - [STIH416_COMPO_M_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7564, 3), - [STIH416_COMPO_A_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7564, 4), - [STIH416_VP8_DEC_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7564, 10), - [STIH416_VTG_MAIN_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7564, 16), - [STIH416_KEYSCAN_SOFTRESET] = STIH416_SRST_LPM(LPM_SYSCFG_1, 8), -}; - -static struct syscfg_reset_controller_data stih416_powerdown_controller = { - .wait_for_ack = true, - .nr_channels = ARRAY_SIZE(stih416_powerdowns), - .channels = stih416_powerdowns, -}; - -static struct syscfg_reset_controller_data stih416_softreset_controller = { - .wait_for_ack = false, - .active_low = true, - .nr_channels = ARRAY_SIZE(stih416_softresets), - .channels = stih416_softresets, -}; - -static const struct of_device_id stih416_reset_match[] = { - { .compatible = "st,stih416-powerdown", - .data = &stih416_powerdown_controller, }, - { .compatible = "st,stih416-softreset", - .data = &stih416_softreset_controller, }, - {}, -}; - -static struct platform_driver stih416_reset_driver = { - .probe = syscfg_reset_probe, - .driver = { - .name = "reset-stih416", - .of_match_table = stih416_reset_match, - }, -}; - -static int __init stih416_reset_init(void) -{ - return platform_driver_register(&stih416_reset_driver); -} -arch_initcall(stih416_reset_init); diff --git a/include/dt-bindings/reset/oxsemi,ox810se.h b/include/dt-bindings/reset/oxsemi,ox810se.h new file mode 100644 index 000000000000..960c26e4504a --- /dev/null +++ b/include/dt-bindings/reset/oxsemi,ox810se.h @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2016 Neil Armstrong + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifndef DT_RESET_OXSEMI_OX810SE_H +#define DT_RESET_OXSEMI_OX810SE_H + +#define RESET_ARM 0 +#define RESET_COPRO 1 +/* Reserved 2 */ +/* Reserved 3 */ +#define RESET_USBHS 4 +#define RESET_USBHSPHY 5 +#define RESET_MAC 6 +#define RESET_PCI 7 +#define RESET_DMA 8 +#define RESET_DPE 9 +#define RESET_DDR 10 +#define RESET_SATA 11 +#define RESET_SATA_LINK 12 +#define RESET_SATA_PHY 13 + /* Reserved 14 */ +#define RESET_NAND 15 +#define RESET_GPIO 16 +#define RESET_UART1 17 +#define RESET_UART2 18 +#define RESET_MISC 19 +#define RESET_I2S 20 +#define RESET_AHB_MON 21 +#define RESET_UART3 22 +#define RESET_UART4 23 +#define RESET_SGDMA 24 +/* Reserved 25 */ +/* Reserved 26 */ +/* Reserved 27 */ +/* Reserved 28 */ +/* Reserved 29 */ +/* Reserved 30 */ +#define RESET_BUS 31 + +#endif /* DT_RESET_OXSEMI_OX810SE_H */ diff --git a/include/dt-bindings/reset/oxsemi,ox820.h b/include/dt-bindings/reset/oxsemi,ox820.h new file mode 100644 index 000000000000..cc6797bf01d8 --- /dev/null +++ b/include/dt-bindings/reset/oxsemi,ox820.h @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2016 Neil Armstrong + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifndef DT_RESET_OXSEMI_OX820_H +#define DT_RESET_OXSEMI_OX820_H + +#define RESET_SCU 0 +#define RESET_LEON 1 +#define RESET_ARM0 2 +#define RESET_ARM1 3 +#define RESET_USBHS 4 +#define RESET_USBPHYA 5 +#define RESET_MAC 6 +#define RESET_PCIEA 7 +#define RESET_SGDMA 8 +#define RESET_CIPHER 9 +#define RESET_DDR 10 +#define RESET_SATA 11 +#define RESET_SATA_LINK 12 +#define RESET_SATA_PHY 13 +#define RESET_PCIEPHY 14 +#define RESET_NAND 15 +#define RESET_GPIO 16 +#define RESET_UART1 17 +#define RESET_UART2 18 +#define RESET_MISC 19 +#define RESET_I2S 20 +#define RESET_SD 21 +#define RESET_MAC_2 22 +#define RESET_PCIEB 23 +#define RESET_VIDEO 24 +#define RESET_DDR_PHY 25 +#define RESET_USBPHYB 26 +#define RESET_USBDEV 27 +/* Reserved 29 */ +#define RESET_ARMDBG 29 +#define RESET_PLLA 30 +#define RESET_PLLB 31 + +#endif /* DT_RESET_OXSEMI_OX820_H */