From 79dcfdd407208cba06bd446e93b0809df1cf10d1 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Thu, 12 Nov 2009 12:07:22 +0200 Subject: [PATCH] OMAP3: PM: Added support for L2 aux ctrl register save and restore This patch adds a save and restore mechanism for ARM L2 auxiliary control register. The feature is enabled by default for GP devices, but for HS/EMU devices the user must enable the service and define the PPA service ID to be used for setting L2 aux ctrl, as this is not currently supported by the bootloader. If nobody alters the contents of L2 aux ctrl from its reset value, this feature is not needed. Kconfig option to enable HS/EMU L2 aux save and restore: - OMAP3_L2_AUX_SECURE_SAVE_RESTORE Kconfig option to select HS/EMU PPA service for setting L2 aux ctrl: - OMAP3_L2_AUX_SECURE_SERVICE_SET_ID Signed-off-by: Tero Kristo Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/sleep34xx.S | 26 ++++++++++++++++++++++++-- arch/arm/plat-omap/Kconfig | 17 +++++++++++++++++ 2 files changed, 41 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index 12a8ba0e0a3c..d522cd70bf53 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -284,6 +284,21 @@ restore: mcr p15, 0, r0, c7, c10, 5 @ data memory barrier .word 0xE1600071 @ call SMI monitor (smi #1) +#ifdef CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE + /* Restore L2 aux control register */ + @ set service ID for PPA + mov r0, #CONFIG_OMAP3_L2_AUX_SECURE_SERVICE_SET_ID + mov r12, r0 @ copy service ID in r12 + mov r1, #0 @ set task ID for ROM code in r1 + mov r2, #4 @ set some flags in r2, r6 + mov r6, #0xff + ldr r4, scratchpad_base + ldr r3, [r4, #0xBC] + adds r3, r3, #8 @ r3 points to parameters + mcr p15, 0, r0, c7, c10, 4 @ data write barrier + mcr p15, 0, r0, c7, c10, 5 @ data memory barrier + .word 0xE1600071 @ call SMI monitor (smi #1) +#endif b logic_l1_restore l2_inv_api_params: .word 0x1, 0x00 @@ -297,6 +312,11 @@ smi: .word 0xE1600070 @ Call SMI monitor (smieq) ldr r0, [r3,#4] mov r12, #0x3 .word 0xE1600070 @ Call SMI monitor (smieq) + ldr r4, scratchpad_base + ldr r3, [r4,#0xBC] + ldr r0, [r3,#12] + mov r12, #0x2 + .word 0xE1600070 @ Call SMI monitor (smieq) logic_l1_restore: mov r1, #0 /* Invalidate all instruction caches to PoU @@ -305,7 +325,7 @@ logic_l1_restore: ldr r4, scratchpad_base ldr r3, [r4,#0xBC] - adds r3, r3, #8 + adds r3, r3, #16 ldmia r3!, {r4-r6} mov sp, r4 msr spsr_cxsf, r5 @@ -424,7 +444,9 @@ save_context_wfi: mov r8, r0 /* Store SDRAM address in r8 */ mrc p15, 0, r5, c1, c0, 1 @ Read Auxiliary Control Register mov r4, #0x1 @ Number of parameters for restore call - stmia r8!, {r4-r5} + stmia r8!, {r4-r5} @ Push parameters for restore call + mrc p15, 1, r5, c9, c0, 2 @ Read L2 AUX ctrl register + stmia r8!, {r4-r5} @ Push parameters for restore call /* Check what that target sleep state is:stored in r1*/ /* 1 - Only L1 and logic lost */ /* 2 - Only L2 lost */ diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 97d0c79ffd2b..be9484a28b12 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -135,6 +135,23 @@ config OMAP_32K_TIMER endchoice +config OMAP3_L2_AUX_SECURE_SAVE_RESTORE + bool "OMAP3 HS/EMU save and restore for L2 AUX control register" + depends on ARCH_OMAP3 && PM + default n + help + Without this option, L2 Auxiliary control register contents are + lost during off-mode entry on HS/EMU devices. This feature + requires support from PPA / boot-loader in HS/EMU devices, which + currently does not exist by default. + +config OMAP3_L2_AUX_SECURE_SERVICE_SET_ID + int "Service ID for the support routine to set L2 AUX control" + depends on OMAP3_L2_AUX_SECURE_SAVE_RESTORE + default 43 + help + PPA routine service ID for setting L2 auxiliary control register. + config OMAP_32K_TIMER_HZ int "Kernel internal timer frequency for 32KHz timer" range 32 1024