From 53f1647da3e8fb3e89066798f0fdc045064d353d Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Wed, 3 Apr 2019 14:48:33 +0200 Subject: [PATCH 001/125] hwmon: (pwm-fan) Disable PWM if fetching cooling data fails In case pwm_fan_of_get_cooling_data() fails we should disable the PWM just like in the other error cases. Fixes: 2e5219c77183 ("hwmon: (pwm-fan) Read PWM FAN configuration from device tree") Cc: # 4.14+ Reported-by: Guenter Rock Signed-off-by: Stefan Wahren Signed-off-by: Guenter Roeck --- drivers/hwmon/pwm-fan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/pwm-fan.c b/drivers/hwmon/pwm-fan.c index 167221c7628a..e4c5197417a8 100644 --- a/drivers/hwmon/pwm-fan.c +++ b/drivers/hwmon/pwm-fan.c @@ -271,7 +271,7 @@ static int pwm_fan_probe(struct platform_device *pdev) ret = pwm_fan_of_get_cooling_data(&pdev->dev, ctx); if (ret) - return ret; + goto err_pwm_disable; ctx->pwm_fan_state = ctx->pwm_fan_max_state; if (IS_ENABLED(CONFIG_THERMAL)) { From b88c5049219a7f322bb1fd65fc30d17472a23563 Mon Sep 17 00:00:00 2001 From: Lei YU Date: Mon, 15 Apr 2019 18:37:20 +0800 Subject: [PATCH 002/125] hwmon: (occ) Fix extended status bits The occ's extended status is checked and shown as sysfs attributes. But the code was incorrectly checking the "status" bits. Fix it by checking the "ext_status" bits. Cc: stable@vger.kernel.org Fixes: df04ced684d4 ("hwmon (occ): Add sysfs attributes for additional OCC data") Signed-off-by: Lei YU Reviewed-by: Eddie James Signed-off-by: Guenter Roeck --- drivers/hwmon/occ/sysfs.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/hwmon/occ/sysfs.c b/drivers/hwmon/occ/sysfs.c index fe3d15e416e7..a71ca94c789f 100644 --- a/drivers/hwmon/occ/sysfs.c +++ b/drivers/hwmon/occ/sysfs.c @@ -42,16 +42,16 @@ static ssize_t occ_sysfs_show(struct device *dev, val = !!(header->status & OCC_STAT_ACTIVE); break; case 2: - val = !!(header->status & OCC_EXT_STAT_DVFS_OT); + val = !!(header->ext_status & OCC_EXT_STAT_DVFS_OT); break; case 3: - val = !!(header->status & OCC_EXT_STAT_DVFS_POWER); + val = !!(header->ext_status & OCC_EXT_STAT_DVFS_POWER); break; case 4: - val = !!(header->status & OCC_EXT_STAT_MEM_THROTTLE); + val = !!(header->ext_status & OCC_EXT_STAT_MEM_THROTTLE); break; case 5: - val = !!(header->status & OCC_EXT_STAT_QUICK_DROP); + val = !!(header->ext_status & OCC_EXT_STAT_QUICK_DROP); break; case 6: val = header->occ_state; From b429ebc86f2e389ba9388fdfac64dc30c70d21a6 Mon Sep 17 00:00:00 2001 From: Vadim Pasternak Date: Mon, 18 Mar 2019 16:10:28 +0000 Subject: [PATCH 003/125] hwmon: (mlxreg-fan) Add support for fan capability registers Add support for fan capability registers in order to distinct between the systems which have minor fan configuration differences. This reduces the amount of code used to describe such systems. The capability registers provides system specific information about the number of physically connected tachometers and system specific fan speed scale parameter. For example one system can be equipped with twelve fan tachometers, while the other with for example, eight or six. Or one system should use default fan speed divider value, while the other has a scale parameter defined in hardware, which should be used for divider setting. Reading this information from the capability registers allows to use the same fan structure for the systems with the such differences. Signed-off-by: Vadim Pasternak Signed-off-by: Guenter Roeck --- drivers/hwmon/mlxreg-fan.c | 73 +++++++++++++++++++++++++++++++++++--- 1 file changed, 68 insertions(+), 5 deletions(-) diff --git a/drivers/hwmon/mlxreg-fan.c b/drivers/hwmon/mlxreg-fan.c index db8c6de0b6a0..44d4b1af1550 100644 --- a/drivers/hwmon/mlxreg-fan.c +++ b/drivers/hwmon/mlxreg-fan.c @@ -27,7 +27,9 @@ #define MLXREG_FAN_SPEED_MAX (MLXREG_FAN_MAX_STATE * 2) #define MLXREG_FAN_SPEED_MIN_LEVEL 2 /* 20 percent */ #define MLXREG_FAN_TACHO_SAMPLES_PER_PULSE_DEF 44 -#define MLXREG_FAN_TACHO_DIVIDER_DEF 1132 +#define MLXREG_FAN_TACHO_DIV_MIN 283 +#define MLXREG_FAN_TACHO_DIV_DEF (MLXREG_FAN_TACHO_DIV_MIN * 4) +#define MLXREG_FAN_TACHO_DIV_SCALE_MAX 64 /* * FAN datasheet defines the formula for RPM calculations as RPM = 15/t-high. * The logic in a programmable device measures the time t-high by sampling the @@ -360,15 +362,57 @@ static const struct thermal_cooling_device_ops mlxreg_fan_cooling_ops = { .set_cur_state = mlxreg_fan_set_cur_state, }; +static int mlxreg_fan_connect_verify(struct mlxreg_fan *fan, + struct mlxreg_core_data *data) +{ + u32 regval; + int err; + + err = regmap_read(fan->regmap, data->capability, ®val); + if (err) { + dev_err(fan->dev, "Failed to query capability register 0x%08x\n", + data->capability); + return err; + } + + return !!(regval & data->bit); +} + +static int mlxreg_fan_speed_divider_get(struct mlxreg_fan *fan, + struct mlxreg_core_data *data) +{ + u32 regval; + int err; + + err = regmap_read(fan->regmap, data->capability, ®val); + if (err) { + dev_err(fan->dev, "Failed to query capability register 0x%08x\n", + data->capability); + return err; + } + + /* + * Set divider value according to the capability register, in case it + * contains valid value. Otherwise use default value. The purpose of + * this validation is to protect against the old hardware, in which + * this register can return zero. + */ + if (regval > 0 && regval <= MLXREG_FAN_TACHO_DIV_SCALE_MAX) + fan->divider = regval * MLXREG_FAN_TACHO_DIV_MIN; + + return 0; +} + static int mlxreg_fan_config(struct mlxreg_fan *fan, struct mlxreg_core_platform_data *pdata) { struct mlxreg_core_data *data = pdata->data; bool configured = false; int tacho_num = 0, i; + int err; fan->samples = MLXREG_FAN_TACHO_SAMPLES_PER_PULSE_DEF; - fan->divider = MLXREG_FAN_TACHO_DIVIDER_DEF; + fan->divider = MLXREG_FAN_TACHO_DIV_DEF; for (i = 0; i < pdata->counter; i++, data++) { if (strnstr(data->label, "tacho", sizeof(data->label))) { if (tacho_num == MLXREG_FAN_MAX_TACHO) { @@ -376,6 +420,17 @@ static int mlxreg_fan_config(struct mlxreg_fan *fan, data->label); return -EINVAL; } + + if (data->capability) { + err = mlxreg_fan_connect_verify(fan, data); + if (err < 0) + return err; + else if (!err) { + tacho_num++; + continue; + } + } + fan->tacho[tacho_num].reg = data->reg; fan->tacho[tacho_num].mask = data->mask; fan->tacho[tacho_num++].connected = true; @@ -394,13 +449,21 @@ static int mlxreg_fan_config(struct mlxreg_fan *fan, return -EINVAL; } /* Validate that conf parameters are not zeros. */ - if (!data->mask || !data->bit) { + if (!data->mask && !data->bit && !data->capability) { dev_err(fan->dev, "invalid conf entry params: %s\n", data->label); return -EINVAL; } - fan->samples = data->mask; - fan->divider = data->bit; + if (data->capability) { + err = mlxreg_fan_speed_divider_get(fan, data); + if (err) + return err; + } else { + if (data->mask) + fan->samples = data->mask; + if (data->bit) + fan->divider = data->bit; + } configured = true; } else { dev_err(fan->dev, "invalid label: %s\n", data->label); From c43a113ca2c807c3e66a5de0ec57d69803b8bc10 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Wed, 20 Mar 2019 14:58:17 +0000 Subject: [PATCH 004/125] hwmon: Add convience macro to define simple static sensors It takes a fair amount of boiler plate code to add new sensors, add a macro that can be used to specify simple static sensors. Signed-off-by: Charles Keepax Signed-off-by: Guenter Roeck --- include/linux/hwmon.h | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/include/linux/hwmon.h b/include/linux/hwmon.h index 99e0c1b0b5fb..7a8cc06a0d61 100644 --- a/include/linux/hwmon.h +++ b/include/linux/hwmon.h @@ -365,6 +365,14 @@ struct hwmon_channel_info { const u32 *config; }; +#define HWMON_CHANNEL_INFO(stype, ...) \ + (&(struct hwmon_channel_info) { \ + .type = hwmon_##stype, \ + .config = (u32 []) { \ + __VA_ARGS__, 0 \ + } \ + }) + /** * Chip configuration * @ops: Pointer to hwmon operations. From 0ddca57737867bdcd57a81ebc9854297cd27a82b Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 20 Mar 2019 10:36:00 -0700 Subject: [PATCH 005/125] hwmon: (ntc_thermistor) Use new HWMON_CHANNEL_INFO() macro The new macro is indeed quite useful. Let's use it. Signed-off-by: Guenter Roeck --- drivers/hwmon/ntc_thermistor.c | 24 ++---------------------- 1 file changed, 2 insertions(+), 22 deletions(-) diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c index f9abeeeead9e..fd47c36a52bc 100644 --- a/drivers/hwmon/ntc_thermistor.c +++ b/drivers/hwmon/ntc_thermistor.c @@ -629,29 +629,9 @@ static umode_t ntc_is_visible(const void *data, enum hwmon_sensor_types type, return 0; } -static const u32 ntc_chip_config[] = { - HWMON_C_REGISTER_TZ, - 0 -}; - -static const struct hwmon_channel_info ntc_chip = { - .type = hwmon_chip, - .config = ntc_chip_config, -}; - -static const u32 ntc_temp_config[] = { - HWMON_T_INPUT | HWMON_T_TYPE, - 0 -}; - -static const struct hwmon_channel_info ntc_temp = { - .type = hwmon_temp, - .config = ntc_temp_config, -}; - static const struct hwmon_channel_info *ntc_info[] = { - &ntc_chip, - &ntc_temp, + HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ), + HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_TYPE), NULL }; From 5ad4d7ca2125e7056a959b12e3b75fb745c73b52 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Thu, 28 Mar 2019 13:09:36 +0000 Subject: [PATCH 006/125] hwmon: lochnagar: Add device tree binding document Lochnagar is an evaluation and development board for Cirrus Logic Smart CODEC and Amp devices. It allows the connection of most Cirrus Logic devices on mini-cards, as well as allowing connection of various application processor systems to provide a full evaluation platform. This driver supports the board controller chip on the Lochnagar board. Signed-off-by: Charles Keepax Reviewed-by: Rob Herring Signed-off-by: Guenter Roeck --- .../bindings/hwmon/cirrus,lochnagar.txt | 26 +++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt diff --git a/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt new file mode 100644 index 000000000000..ffb79ccf51ee --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt @@ -0,0 +1,26 @@ +Cirrus Logic Lochnagar Audio Development Board + +Lochnagar is an evaluation and development board for Cirrus Logic +Smart CODEC and Amp devices. It allows the connection of most Cirrus +Logic devices on mini-cards, as well as allowing connection of +various application processor systems to provide a full evaluation +platform. Audio system topology, clocking and power can all be +controlled through the Lochnagar, allowing the device under test +to be used in a variety of possible use cases. + +This binding document describes the binding for the hardware monitor +portion of the driver. + +This binding must be part of the Lochnagar MFD binding: + [4] ../mfd/cirrus,lochnagar.txt + +Required properties: + + - compatible : One of the following strings: + "cirrus,lochnagar2-hwmon" + +Example: + +lochnagar-hwmon { + compatible = "cirrus,lochnagar2-hwmon"; +}; From 4cdb562147467b3530e86c7c51c3fbffe3067c09 Mon Sep 17 00:00:00 2001 From: Lucas Tanure Date: Thu, 28 Mar 2019 13:09:37 +0000 Subject: [PATCH 007/125] hwmon: lochnagar: Add Lochnagar 2 hardware monitoring driver Lochnagar is an evaluation and development board for Cirrus Logic Smart CODEC and Amp devices. It allows the connection of most Cirrus Logic devices on mini-cards, as well as allowing connection of various application processor systems to provide a full evaluation platform. This driver adds support for the hardware monitoring features of the Lochnagar 2 to the hwmon API. Monitoring is provided for the board voltages, currents and temperature supported by the board controller chip. Signed-off-by: Lucas Tanure Signed-off-by: Charles Keepax Signed-off-by: Guenter Roeck --- Documentation/hwmon/lochnagar | 80 +++++++ MAINTAINERS | 3 + drivers/hwmon/Kconfig | 10 + drivers/hwmon/Makefile | 1 + drivers/hwmon/lochnagar-hwmon.c | 412 ++++++++++++++++++++++++++++++++ 5 files changed, 506 insertions(+) create mode 100644 Documentation/hwmon/lochnagar create mode 100644 drivers/hwmon/lochnagar-hwmon.c diff --git a/Documentation/hwmon/lochnagar b/Documentation/hwmon/lochnagar new file mode 100644 index 000000000000..e9686fb3eb40 --- /dev/null +++ b/Documentation/hwmon/lochnagar @@ -0,0 +1,80 @@ +Kernel Driver Lochnagar +======================== + +Supported systems: + * Cirrus Logic : Lochnagar 2 + +Author: Lucas A. Tanure Alves + +Description +----------- + +Lochnagar 2 features built-in Current Monitor circuitry that allows for the +measurement of both voltage and current on up to eight of the supply voltage +rails provided to the minicards. The Current Monitor does not require any +hardware modifications or external circuitry to operate. + +The current and voltage measurements are obtained through the standard register +map interface to the Lochnagar board controller, and can therefore be monitored +by software. + +Sysfs attributes +---------------- + +temp1_input The Lochnagar board temperature (milliCelsius) +in0_input Measured voltage for DBVDD1 (milliVolts) +in0_label "DBVDD1" +curr1_input Measured current for DBVDD1 (milliAmps) +curr1_label "DBVDD1" +power1_average Measured average power for DBVDD1 (microWatts) +power1_average_interval Power averaging time input valid from 1 to 1708mS +power1_label "DBVDD1" +in1_input Measured voltage for 1V8 DSP (milliVolts) +in1_label "1V8 DSP" +curr2_input Measured current for 1V8 DSP (milliAmps) +curr2_label "1V8 DSP" +power2_average Measured average power for 1V8 DSP (microWatts) +power2_average_interval Power averaging time input valid from 1 to 1708mS +power2_label "1V8 DSP" +in2_input Measured voltage for 1V8 CDC (milliVolts) +in2_label "1V8 CDC" +curr3_input Measured current for 1V8 CDC (milliAmps) +curr3_label "1V8 CDC" +power3_average Measured average power for 1V8 CDC (microWatts) +power3_average_interval Power averaging time input valid from 1 to 1708mS +power3_label "1V8 CDC" +in3_input Measured voltage for VDDCORE DSP (milliVolts) +in3_label "VDDCORE DSP" +curr4_input Measured current for VDDCORE DSP (milliAmps) +curr4_label "VDDCORE DSP" +power4_average Measured average power for VDDCORE DSP (microWatts) +power4_average_interval Power averaging time input valid from 1 to 1708mS +power4_label "VDDCORE DSP" +in4_input Measured voltage for AVDD 1V8 (milliVolts) +in4_label "AVDD 1V8" +curr5_input Measured current for AVDD 1V8 (milliAmps) +curr5_label "AVDD 1V8" +power5_average Measured average power for AVDD 1V8 (microWatts) +power5_average_interval Power averaging time input valid from 1 to 1708mS +power5_label "AVDD 1V8" +curr6_input Measured current for SYSVDD (milliAmps) +curr6_label "SYSVDD" +power6_average Measured average power for SYSVDD (microWatts) +power6_average_interval Power averaging time input valid from 1 to 1708mS +power6_label "SYSVDD" +in6_input Measured voltage for VDDCORE CDC (milliVolts) +in6_label "VDDCORE CDC" +curr7_input Measured current for VDDCORE CDC (milliAmps) +curr7_label "VDDCORE CDC" +power7_average Measured average power for VDDCORE CDC (microWatts) +power7_average_interval Power averaging time input valid from 1 to 1708mS +power7_label "VDDCORE CDC" +in7_input Measured voltage for MICVDD (milliVolts) +in7_label "MICVDD" +curr8_input Measured current for MICVDD (milliAmps) +curr8_label "MICVDD" +power8_average Measured average power for MICVDD (microWatts) +power8_average_interval Power averaging time input valid from 1 to 1708mS +power8_label "MICVDD" + +Note: It is not possible to measure voltage on the SYSVDD rail. diff --git a/MAINTAINERS b/MAINTAINERS index 2359e12e4c41..cfd9884256af 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3797,6 +3797,7 @@ M: Richard Fitzgerald L: patches@opensource.cirrus.com S: Supported F: drivers/clk/clk-lochnagar.c +F: drivers/hwmon/lochnagar-hwmon.c F: drivers/mfd/lochnagar-i2c.c F: drivers/pinctrl/cirrus/pinctrl-lochnagar.c F: drivers/regulator/lochnagar-regulator.c @@ -3805,8 +3806,10 @@ F: include/dt-bindings/pinctrl/lochnagar.h F: include/linux/mfd/lochnagar* F: Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt F: Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt +F: Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt F: Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.txt F: Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt +F: Documentation/hwmon/lochnagar CISCO FCOE HBA DRIVER M: Satish Kharat diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index d0f1dfe2bcbb..dedd5febd3aa 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -705,6 +705,16 @@ config SENSORS_LINEAGE This driver can also be built as a module. If so, the module will be called lineage-pem. +config SENSORS_LOCHNAGAR + tristate "Lochnagar Hardware Monitor" + depends on MFD_LOCHNAGAR + help + If you say yes here you get support for Lochnagar 2 temperature, + voltage and current sensors abilities. + + This driver can also be built as a module. If so, the module + will be called lochnagar-hwmon. + config SENSORS_LTC2945 tristate "Linear Technology LTC2945" depends on I2C diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index f5c7b442e69e..8db472ea04f0 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -89,6 +89,7 @@ obj-$(CONFIG_SENSORS_JZ4740) += jz4740-hwmon.o obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o obj-$(CONFIG_SENSORS_K10TEMP) += k10temp.o obj-$(CONFIG_SENSORS_LINEAGE) += lineage-pem.o +obj-$(CONFIG_SENSORS_LOCHNAGAR) += lochnagar-hwmon.o obj-$(CONFIG_SENSORS_LM63) += lm63.o obj-$(CONFIG_SENSORS_LM70) += lm70.o obj-$(CONFIG_SENSORS_LM73) += lm73.o diff --git a/drivers/hwmon/lochnagar-hwmon.c b/drivers/hwmon/lochnagar-hwmon.c new file mode 100644 index 000000000000..8b19adf2eeb0 --- /dev/null +++ b/drivers/hwmon/lochnagar-hwmon.c @@ -0,0 +1,412 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Lochnagar hardware monitoring features + * + * Copyright (c) 2016-2019 Cirrus Logic, Inc. and + * Cirrus Logic International Semiconductor Ltd. + * + * Author: Lucas Tanure + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define LN2_MAX_NSAMPLE 1023 +#define LN2_SAMPLE_US 1670 + +#define LN2_CURR_UNITS 1000 +#define LN2_VOLT_UNITS 1000 +#define LN2_TEMP_UNITS 1000 +#define LN2_PWR_UNITS 1000000 + +static const char * const lochnagar_chan_names[] = { + "DBVDD1", + "1V8 DSP", + "1V8 CDC", + "VDDCORE DSP", + "AVDD 1V8", + "SYSVDD", + "VDDCORE CDC", + "MICVDD", +}; + +struct lochnagar_hwmon { + struct regmap *regmap; + + long power_nsamples[ARRAY_SIZE(lochnagar_chan_names)]; + + /* Lock to ensure only a single sensor is read at a time */ + struct mutex sensor_lock; +}; + +enum lochnagar_measure_mode { + LN2_CURR = 0, + LN2_VOLT, + LN2_TEMP, +}; + +/** + * float_to_long - Convert ieee754 reading from hardware to an integer + * + * @data: Value read from the hardware + * @precision: Units to multiply up to eg. 1000 = milli, 1000000 = micro + * + * Return: Converted integer reading + * + * Depending on the measurement type the hardware returns an ieee754 + * floating point value in either volts, amps or celsius. This function + * will convert that into an integer in a smaller unit such as micro-amps + * or milli-celsius. The hardware does not return NaN, so consideration of + * that is not required. + */ +static long float_to_long(u32 data, u32 precision) +{ + u64 man = data & 0x007FFFFF; + int exp = ((data & 0x7F800000) >> 23) - 127 - 23; + bool negative = data & 0x80000000; + long result; + + man = (man + (1 << 23)) * precision; + + if (fls64(man) + exp > (int)sizeof(long) * 8 - 1) + result = LONG_MAX; + else if (exp < 0) + result = (man + (1ull << (-exp - 1))) >> -exp; + else + result = man << exp; + + return negative ? -result : result; +} + +static int do_measurement(struct regmap *regmap, int chan, + enum lochnagar_measure_mode mode, int nsamples) +{ + unsigned int val; + int ret; + + chan = 1 << (chan + LOCHNAGAR2_IMON_MEASURED_CHANNELS_SHIFT); + + ret = regmap_write(regmap, LOCHNAGAR2_IMON_CTRL1, + LOCHNAGAR2_IMON_ENA_MASK | chan | mode); + if (ret < 0) + return ret; + + ret = regmap_write(regmap, LOCHNAGAR2_IMON_CTRL2, nsamples); + if (ret < 0) + return ret; + + ret = regmap_write(regmap, LOCHNAGAR2_IMON_CTRL3, + LOCHNAGAR2_IMON_CONFIGURE_MASK); + if (ret < 0) + return ret; + + ret = regmap_read_poll_timeout(regmap, LOCHNAGAR2_IMON_CTRL3, val, + val & LOCHNAGAR2_IMON_DONE_MASK, + 1000, 10000); + if (ret < 0) + return ret; + + ret = regmap_write(regmap, LOCHNAGAR2_IMON_CTRL3, + LOCHNAGAR2_IMON_MEASURE_MASK); + if (ret < 0) + return ret; + + /* + * Actual measurement time is ~1.67mS per sample, approximate this + * with a 1.5mS per sample msleep and then poll for success up to + * ~0.17mS * 1023 (LN2_MAX_NSAMPLES). Normally for smaller values + * of nsamples the poll will complete on the first loop due to + * other latency in the system. + */ + msleep((nsamples * 3) / 2); + + ret = regmap_read_poll_timeout(regmap, LOCHNAGAR2_IMON_CTRL3, val, + val & LOCHNAGAR2_IMON_DONE_MASK, + 5000, 200000); + if (ret < 0) + return ret; + + return regmap_write(regmap, LOCHNAGAR2_IMON_CTRL3, 0); +} + +static int request_data(struct regmap *regmap, int chan, u32 *data) +{ + unsigned int val; + int ret; + + ret = regmap_write(regmap, LOCHNAGAR2_IMON_CTRL4, + LOCHNAGAR2_IMON_DATA_REQ_MASK | + chan << LOCHNAGAR2_IMON_CH_SEL_SHIFT); + if (ret < 0) + return ret; + + ret = regmap_read_poll_timeout(regmap, LOCHNAGAR2_IMON_CTRL4, val, + val & LOCHNAGAR2_IMON_DATA_RDY_MASK, + 1000, 10000); + if (ret < 0) + return ret; + + ret = regmap_read(regmap, LOCHNAGAR2_IMON_DATA1, &val); + if (ret < 0) + return ret; + + *data = val << 16; + + ret = regmap_read(regmap, LOCHNAGAR2_IMON_DATA2, &val); + if (ret < 0) + return ret; + + *data |= val; + + return regmap_write(regmap, LOCHNAGAR2_IMON_CTRL4, 0); +} + +static int read_sensor(struct device *dev, int chan, + enum lochnagar_measure_mode mode, int nsamples, + unsigned int precision, long *val) +{ + struct lochnagar_hwmon *priv = dev_get_drvdata(dev); + struct regmap *regmap = priv->regmap; + u32 data; + int ret; + + mutex_lock(&priv->sensor_lock); + + ret = do_measurement(regmap, chan, mode, nsamples); + if (ret < 0) { + dev_err(dev, "Failed to perform measurement: %d\n", ret); + goto error; + } + + ret = request_data(regmap, chan, &data); + if (ret < 0) { + dev_err(dev, "Failed to read measurement: %d\n", ret); + goto error; + } + + *val = float_to_long(data, precision); + +error: + mutex_unlock(&priv->sensor_lock); + + return ret; +} + +static int read_power(struct device *dev, int chan, long *val) +{ + struct lochnagar_hwmon *priv = dev_get_drvdata(dev); + int nsamples = priv->power_nsamples[chan]; + u64 power; + int ret; + + if (!strcmp("SYSVDD", lochnagar_chan_names[chan])) { + power = 5 * LN2_PWR_UNITS; + } else { + ret = read_sensor(dev, chan, LN2_VOLT, 1, LN2_PWR_UNITS, val); + if (ret < 0) + return ret; + + power = abs(*val); + } + + ret = read_sensor(dev, chan, LN2_CURR, nsamples, LN2_PWR_UNITS, val); + if (ret < 0) + return ret; + + power *= abs(*val); + power = DIV_ROUND_CLOSEST_ULL(power, LN2_PWR_UNITS); + + if (power > LONG_MAX) + *val = LONG_MAX; + else + *val = power; + + return 0; +} + +static umode_t lochnagar_is_visible(const void *drvdata, + enum hwmon_sensor_types type, + u32 attr, int chan) +{ + switch (type) { + case hwmon_in: + if (!strcmp("SYSVDD", lochnagar_chan_names[chan])) + return 0; + break; + case hwmon_power: + if (attr == hwmon_power_average_interval) + return 0644; + break; + default: + break; + } + + return 0444; +} + +static int lochnagar_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int chan, long *val) +{ + struct lochnagar_hwmon *priv = dev_get_drvdata(dev); + int interval; + + switch (type) { + case hwmon_in: + return read_sensor(dev, chan, LN2_VOLT, 1, LN2_VOLT_UNITS, val); + case hwmon_curr: + return read_sensor(dev, chan, LN2_CURR, 1, LN2_CURR_UNITS, val); + case hwmon_temp: + return read_sensor(dev, chan, LN2_TEMP, 1, LN2_TEMP_UNITS, val); + case hwmon_power: + switch (attr) { + case hwmon_power_average: + return read_power(dev, chan, val); + case hwmon_power_average_interval: + interval = priv->power_nsamples[chan] * LN2_SAMPLE_US; + *val = DIV_ROUND_CLOSEST(interval, 1000); + return 0; + default: + return -EOPNOTSUPP; + } + default: + return -EOPNOTSUPP; + } +} + +static int lochnagar_read_string(struct device *dev, + enum hwmon_sensor_types type, u32 attr, + int chan, const char **str) +{ + switch (type) { + case hwmon_in: + case hwmon_curr: + case hwmon_power: + *str = lochnagar_chan_names[chan]; + return 0; + default: + return -EOPNOTSUPP; + } +} + +static int lochnagar_write(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int chan, long val) +{ + struct lochnagar_hwmon *priv = dev_get_drvdata(dev); + + if (type != hwmon_power || attr != hwmon_power_average_interval) + return -EOPNOTSUPP; + + val = clamp_t(long, val, 1, (LN2_MAX_NSAMPLE * LN2_SAMPLE_US) / 1000); + val = DIV_ROUND_CLOSEST(val * 1000, LN2_SAMPLE_US); + + priv->power_nsamples[chan] = val; + + return 0; +} + +static const struct hwmon_ops lochnagar_ops = { + .is_visible = lochnagar_is_visible, + .read = lochnagar_read, + .read_string = lochnagar_read_string, + .write = lochnagar_write, +}; + +static const struct hwmon_channel_info *lochnagar_info[] = { + HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT), + HWMON_CHANNEL_INFO(in, HWMON_I_INPUT | HWMON_I_LABEL, + HWMON_I_INPUT | HWMON_I_LABEL, + HWMON_I_INPUT | HWMON_I_LABEL, + HWMON_I_INPUT | HWMON_I_LABEL, + HWMON_I_INPUT | HWMON_I_LABEL, + HWMON_I_INPUT | HWMON_I_LABEL, + HWMON_I_INPUT | HWMON_I_LABEL, + HWMON_I_INPUT | HWMON_I_LABEL), + HWMON_CHANNEL_INFO(curr, HWMON_C_INPUT | HWMON_C_LABEL, + HWMON_C_INPUT | HWMON_C_LABEL, + HWMON_C_INPUT | HWMON_C_LABEL, + HWMON_C_INPUT | HWMON_C_LABEL, + HWMON_C_INPUT | HWMON_C_LABEL, + HWMON_C_INPUT | HWMON_C_LABEL, + HWMON_C_INPUT | HWMON_C_LABEL, + HWMON_C_INPUT | HWMON_C_LABEL), + HWMON_CHANNEL_INFO(power, HWMON_P_AVERAGE | HWMON_P_AVERAGE_INTERVAL | + HWMON_P_LABEL, + HWMON_P_AVERAGE | HWMON_P_AVERAGE_INTERVAL | + HWMON_P_LABEL, + HWMON_P_AVERAGE | HWMON_P_AVERAGE_INTERVAL | + HWMON_P_LABEL, + HWMON_P_AVERAGE | HWMON_P_AVERAGE_INTERVAL | + HWMON_P_LABEL, + HWMON_P_AVERAGE | HWMON_P_AVERAGE_INTERVAL | + HWMON_P_LABEL, + HWMON_P_AVERAGE | HWMON_P_AVERAGE_INTERVAL | + HWMON_P_LABEL, + HWMON_P_AVERAGE | HWMON_P_AVERAGE_INTERVAL | + HWMON_P_LABEL, + HWMON_P_AVERAGE | HWMON_P_AVERAGE_INTERVAL | + HWMON_P_LABEL), + NULL +}; + +static const struct hwmon_chip_info lochnagar_chip_info = { + .ops = &lochnagar_ops, + .info = lochnagar_info, +}; + +static const struct of_device_id lochnagar_of_match[] = { + { .compatible = "cirrus,lochnagar2-hwmon" }, + {} +}; +MODULE_DEVICE_TABLE(of, lochnagar_of_match); + +static int lochnagar_hwmon_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device *hwmon_dev; + struct lochnagar_hwmon *priv; + int i; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + mutex_init(&priv->sensor_lock); + + priv->regmap = dev_get_regmap(dev->parent, NULL); + if (!priv->regmap) { + dev_err(dev, "No register map found\n"); + return -EINVAL; + } + + for (i = 0; i < ARRAY_SIZE(priv->power_nsamples); i++) + priv->power_nsamples[i] = 96; + + hwmon_dev = devm_hwmon_device_register_with_info(dev, "Lochnagar", priv, + &lochnagar_chip_info, + NULL); + + return PTR_ERR_OR_ZERO(hwmon_dev); +} + +static struct platform_driver lochnagar_hwmon_driver = { + .driver = { + .name = "lochnagar-hwmon", + .of_match_table = lochnagar_of_match, + }, + .probe = lochnagar_hwmon_probe, +}; +module_platform_driver(lochnagar_hwmon_driver); + +MODULE_AUTHOR("Lucas Tanure "); +MODULE_DESCRIPTION("Lochnagar hardware monitoring features"); +MODULE_LICENSE("GPL"); From 4ec1d234a96659b881d9e2070978ec0a25668d44 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Fri, 29 Mar 2019 13:26:40 -0700 Subject: [PATCH 008/125] hwmon: (nct7904) Use new HWMON_CHANNEL_INFO() macro The new macro simplifies the code, reduces the likelihood of errors, and makes the code easier to read. Signed-off-by: Guenter Roeck --- drivers/hwmon/nct7904.c | 128 +++++++++++++++------------------------- 1 file changed, 46 insertions(+), 82 deletions(-) diff --git a/drivers/hwmon/nct7904.c b/drivers/hwmon/nct7904.c index 82c7de7b4639..04516789b070 100644 --- a/drivers/hwmon/nct7904.c +++ b/drivers/hwmon/nct7904.c @@ -400,89 +400,53 @@ static int nct7904_detect(struct i2c_client *client, return 0; } -static const u32 nct7904_in_config[] = { - HWMON_I_INPUT, /* dummy, skipped in is_visible */ - HWMON_I_INPUT, - HWMON_I_INPUT, - HWMON_I_INPUT, - HWMON_I_INPUT, - HWMON_I_INPUT, - HWMON_I_INPUT, - HWMON_I_INPUT, - HWMON_I_INPUT, - HWMON_I_INPUT, - HWMON_I_INPUT, - HWMON_I_INPUT, - HWMON_I_INPUT, - HWMON_I_INPUT, - HWMON_I_INPUT, - HWMON_I_INPUT, - HWMON_I_INPUT, - HWMON_I_INPUT, - HWMON_I_INPUT, - HWMON_I_INPUT, - HWMON_I_INPUT, - 0 -}; - -static const struct hwmon_channel_info nct7904_in = { - .type = hwmon_in, - .config = nct7904_in_config, -}; - -static const u32 nct7904_fan_config[] = { - HWMON_F_INPUT, - HWMON_F_INPUT, - HWMON_F_INPUT, - HWMON_F_INPUT, - HWMON_F_INPUT, - HWMON_F_INPUT, - HWMON_F_INPUT, - HWMON_F_INPUT, - 0 -}; - -static const struct hwmon_channel_info nct7904_fan = { - .type = hwmon_fan, - .config = nct7904_fan_config, -}; - -static const u32 nct7904_pwm_config[] = { - HWMON_PWM_INPUT | HWMON_PWM_ENABLE, - HWMON_PWM_INPUT | HWMON_PWM_ENABLE, - HWMON_PWM_INPUT | HWMON_PWM_ENABLE, - HWMON_PWM_INPUT | HWMON_PWM_ENABLE, - 0 -}; - -static const struct hwmon_channel_info nct7904_pwm = { - .type = hwmon_pwm, - .config = nct7904_pwm_config, -}; - -static const u32 nct7904_temp_config[] = { - HWMON_T_INPUT, - HWMON_T_INPUT, - HWMON_T_INPUT, - HWMON_T_INPUT, - HWMON_T_INPUT, - HWMON_T_INPUT, - HWMON_T_INPUT, - HWMON_T_INPUT, - HWMON_T_INPUT, - 0 -}; - -static const struct hwmon_channel_info nct7904_temp = { - .type = hwmon_temp, - .config = nct7904_temp_config, -}; - static const struct hwmon_channel_info *nct7904_info[] = { - &nct7904_in, - &nct7904_fan, - &nct7904_pwm, - &nct7904_temp, + HWMON_CHANNEL_INFO(in, + HWMON_I_INPUT, /* dummy, skipped in is_visible */ + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT), + HWMON_CHANNEL_INFO(fan, + HWMON_F_INPUT, + HWMON_F_INPUT, + HWMON_F_INPUT, + HWMON_F_INPUT, + HWMON_F_INPUT, + HWMON_F_INPUT, + HWMON_F_INPUT, + HWMON_F_INPUT), + HWMON_CHANNEL_INFO(pwm, + HWMON_PWM_INPUT | HWMON_PWM_ENABLE, + HWMON_PWM_INPUT | HWMON_PWM_ENABLE, + HWMON_PWM_INPUT | HWMON_PWM_ENABLE, + HWMON_PWM_INPUT | HWMON_PWM_ENABLE), + HWMON_CHANNEL_INFO(temp, + HWMON_T_INPUT, + HWMON_T_INPUT, + HWMON_T_INPUT, + HWMON_T_INPUT, + HWMON_T_INPUT, + HWMON_T_INPUT, + HWMON_T_INPUT, + HWMON_T_INPUT, + HWMON_T_INPUT), NULL }; From 6bf2db4621fc1ac7a00bb7b770462211a5b7fdf9 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sun, 31 Mar 2019 10:22:24 -0700 Subject: [PATCH 009/125] hwmon: Documentation: Add usage example for HWMON_CHANNEL_INFO The new HWMON_CHANNEL_INFO macro simplifies the code, reduces the likelihood of errors, and makes the code easier to read. Add a usage example to help driver writers to actually use it. Signed-off-by: Guenter Roeck --- Documentation/hwmon/hwmon-kernel-api.txt | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/Documentation/hwmon/hwmon-kernel-api.txt b/Documentation/hwmon/hwmon-kernel-api.txt index 8bdefb41be30..f8e2ab5c21b9 100644 --- a/Documentation/hwmon/hwmon-kernel-api.txt +++ b/Documentation/hwmon/hwmon-kernel-api.txt @@ -207,6 +207,19 @@ static const struct hwmon_channel_info *lm75_info[] = { NULL }; +The HWMON_CHANNEL_INFO() macro can and should be used when possible. +With this macro, the above example can be simplified to + +static const struct hwmon_channel_info *lm75_info[] = { + HWMON_CHANNEL_INFO(chip, + HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL), + HWMON_CHANNEL_INFO(temp, + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST), + NULL +}; + +The remaining declarations are as follows. + static const struct hwmon_ops lm75_hwmon_ops = { .is_visible = lm75_is_visible, .read = lm75_read, From ff56121e71fdee7ad3d6c40beab57d680254e41a Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sun, 31 Mar 2019 10:53:46 -0700 Subject: [PATCH 010/125] hwmon: (adt7411) Use HWMON_CHANNEL_INFO macro The HWMON_CHANNEL_INFO macro simplifies the code, reduces the likelihood of errors, and makes the code easier to read. The conversion was done automatically with coccinelle. The semantic patch used to make this change is as follows. @r@ initializer list elements; identifier i; @@ -u32 i[] = { - elements, - 0 -}; @s@ identifier r.i,j,ty; @@ -struct hwmon_channel_info j = { - .type = ty, - .config = i, -}; @script:ocaml t@ ty << s.ty; elements << r.elements; shorter; elems; @@ shorter := make_ident (List.hd(List.rev (Str.split (Str.regexp "_") ty))); elems := make_ident (String.concat "," (List.map (fun x -> Printf.sprintf "\n\t\t\t %s" x) (Str.split (Str.regexp " , ") elements))) @@ identifier s.j,t.shorter; identifier t.elems; @@ - &j + HWMON_CHANNEL_INFO(shorter,elems) This patch does not introduce functional changes. Many thanks to Julia Lawall for providing the semantic patch. Signed-off-by: Guenter Roeck --- drivers/hwmon/adt7411.c | 48 +++++++++++++---------------------------- 1 file changed, 15 insertions(+), 33 deletions(-) diff --git a/drivers/hwmon/adt7411.c b/drivers/hwmon/adt7411.c index b939f8a115ba..44a827b031cb 100644 --- a/drivers/hwmon/adt7411.c +++ b/drivers/hwmon/adt7411.c @@ -639,40 +639,22 @@ static int adt7411_init_device(struct adt7411_data *data) return i2c_smbus_write_byte_data(data->client, ADT7411_REG_CFG1, val); } -static const u32 adt7411_in_config[] = { - HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | HWMON_I_ALARM, - HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | HWMON_I_ALARM, - HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | HWMON_I_ALARM, - HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | HWMON_I_ALARM, - HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | HWMON_I_ALARM, - HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | HWMON_I_ALARM, - HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | HWMON_I_ALARM, - HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | HWMON_I_ALARM, - HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | HWMON_I_ALARM, - 0 -}; - -static const struct hwmon_channel_info adt7411_in = { - .type = hwmon_in, - .config = adt7411_in_config, -}; - -static const u32 adt7411_temp_config[] = { - HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MIN_ALARM | - HWMON_T_MAX | HWMON_T_MAX_ALARM, - HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MIN_ALARM | - HWMON_T_MAX | HWMON_T_MAX_ALARM | HWMON_T_FAULT, - 0 -}; - -static const struct hwmon_channel_info adt7411_temp = { - .type = hwmon_temp, - .config = adt7411_temp_config, -}; - static const struct hwmon_channel_info *adt7411_info[] = { - &adt7411_in, - &adt7411_temp, + HWMON_CHANNEL_INFO(in, + HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | HWMON_I_ALARM, + HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | HWMON_I_ALARM, + HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | HWMON_I_ALARM, + HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | HWMON_I_ALARM, + HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | HWMON_I_ALARM, + HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | HWMON_I_ALARM, + HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | HWMON_I_ALARM, + HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | HWMON_I_ALARM, + HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | HWMON_I_ALARM), + HWMON_CHANNEL_INFO(temp, + HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MIN_ALARM | + HWMON_T_MAX | HWMON_T_MAX_ALARM, + HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MIN_ALARM | + HWMON_T_MAX | HWMON_T_MAX_ALARM | HWMON_T_FAULT), NULL }; From 6f307b7c2ba218ac134926624cf9a9e9a5cb17c0 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sun, 31 Mar 2019 10:53:47 -0700 Subject: [PATCH 011/125] hwmon: (ina3221) Use HWMON_CHANNEL_INFO macro The HWMON_CHANNEL_INFO macro simplifies the code, reduces the likelihood of errors, and makes the code easier to read. The conversion was done automatically with coccinelle. The semantic patch used to make this change is as follows. @r@ initializer list elements; identifier i; @@ -u32 i[] = { - elements, - 0 -}; @s@ identifier r.i,j,ty; @@ -struct hwmon_channel_info j = { - .type = ty, - .config = i, -}; @script:ocaml t@ ty << s.ty; elements << r.elements; shorter; elems; @@ shorter := make_ident (List.hd(List.rev (Str.split (Str.regexp "_") ty))); elems := make_ident (String.concat "," (List.map (fun x -> Printf.sprintf "\n\t\t\t %s" x) (Str.split (Str.regexp " , ") elements))) @@ identifier s.j,t.shorter; identifier t.elems; @@ - &j + HWMON_CHANNEL_INFO(shorter,elems) This patch does not introduce functional changes. Many thanks to Julia Lawall for providing the semantic patch. The patch was post-edited to retain comments. Signed-off-by: Guenter Roeck --- drivers/hwmon/ina3221.c | 48 +++++++++++++---------------------------- 1 file changed, 15 insertions(+), 33 deletions(-) diff --git a/drivers/hwmon/ina3221.c b/drivers/hwmon/ina3221.c index 3626b87a5fd2..e6f43df0435c 100644 --- a/drivers/hwmon/ina3221.c +++ b/drivers/hwmon/ina3221.c @@ -458,44 +458,26 @@ static umode_t ina3221_is_visible(const void *drvdata, } } -static const u32 ina3221_in_config[] = { - /* 0: dummy, skipped in is_visible */ - HWMON_I_INPUT, - /* 1-3: input voltage Channels */ - HWMON_I_INPUT | HWMON_I_ENABLE | HWMON_I_LABEL, - HWMON_I_INPUT | HWMON_I_ENABLE | HWMON_I_LABEL, - HWMON_I_INPUT | HWMON_I_ENABLE | HWMON_I_LABEL, - /* 4-6: shunt voltage Channels */ - HWMON_I_INPUT, - HWMON_I_INPUT, - HWMON_I_INPUT, - 0 -}; - -static const struct hwmon_channel_info ina3221_in = { - .type = hwmon_in, - .config = ina3221_in_config, -}; - #define INA3221_HWMON_CURR_CONFIG (HWMON_C_INPUT | \ HWMON_C_CRIT | HWMON_C_CRIT_ALARM | \ HWMON_C_MAX | HWMON_C_MAX_ALARM) -static const u32 ina3221_curr_config[] = { - INA3221_HWMON_CURR_CONFIG, - INA3221_HWMON_CURR_CONFIG, - INA3221_HWMON_CURR_CONFIG, - 0 -}; - -static const struct hwmon_channel_info ina3221_curr = { - .type = hwmon_curr, - .config = ina3221_curr_config, -}; - static const struct hwmon_channel_info *ina3221_info[] = { - &ina3221_in, - &ina3221_curr, + HWMON_CHANNEL_INFO(in, + /* 0: dummy, skipped in is_visible */ + HWMON_I_INPUT, + /* 1-3: input voltage Channels */ + HWMON_I_INPUT | HWMON_I_ENABLE | HWMON_I_LABEL, + HWMON_I_INPUT | HWMON_I_ENABLE | HWMON_I_LABEL, + HWMON_I_INPUT | HWMON_I_ENABLE | HWMON_I_LABEL, + /* 4-6: shunt voltage Channels */ + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT), + HWMON_CHANNEL_INFO(curr, + INA3221_HWMON_CURR_CONFIG, + INA3221_HWMON_CURR_CONFIG, + INA3221_HWMON_CURR_CONFIG), NULL }; From 1eade10fe94e75cd638aa61a3161c82ad625f69b Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sun, 31 Mar 2019 10:53:47 -0700 Subject: [PATCH 012/125] hwmon: (jc42) Use HWMON_CHANNEL_INFO macro The HWMON_CHANNEL_INFO macro simplifies the code, reduces the likelihood of errors, and makes the code easier to read. The conversion was done automatically with coccinelle. The semantic patch used to make this change is as follows. @r@ initializer list elements; identifier i; @@ -u32 i[] = { - elements, - 0 -}; @s@ identifier r.i,j,ty; @@ -struct hwmon_channel_info j = { - .type = ty, - .config = i, -}; @script:ocaml t@ ty << s.ty; elements << r.elements; shorter; elems; @@ shorter := make_ident (List.hd(List.rev (Str.split (Str.regexp "_") ty))); elems := make_ident (String.concat "," (List.map (fun x -> Printf.sprintf "\n\t\t\t %s" x) (Str.split (Str.regexp " , ") elements))) @@ identifier s.j,t.shorter; identifier t.elems; @@ - &j + HWMON_CHANNEL_INFO(shorter,elems) This patch does not introduce functional changes. Many thanks to Julia Lawall for providing the semantic patch. Signed-off-by: Guenter Roeck --- drivers/hwmon/jc42.c | 18 +++++------------- 1 file changed, 5 insertions(+), 13 deletions(-) diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c index 4fa482ae0eb5..6b57a6d4e626 100644 --- a/drivers/hwmon/jc42.c +++ b/drivers/hwmon/jc42.c @@ -451,20 +451,12 @@ static int jc42_detect(struct i2c_client *client, struct i2c_board_info *info) return -ENODEV; } -static const u32 jc42_temp_config[] = { - HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_CRIT | - HWMON_T_MAX_HYST | HWMON_T_CRIT_HYST | - HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM, - 0 -}; - -static const struct hwmon_channel_info jc42_temp = { - .type = hwmon_temp, - .config = jc42_temp_config, -}; - static const struct hwmon_channel_info *jc42_info[] = { - &jc42_temp, + HWMON_CHANNEL_INFO(temp, + HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | + HWMON_T_CRIT | HWMON_T_MAX_HYST | + HWMON_T_CRIT_HYST | HWMON_T_MIN_ALARM | + HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM), NULL }; From e4f6fed1271062564296d230acb2b5e32a07d274 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sun, 31 Mar 2019 10:53:47 -0700 Subject: [PATCH 013/125] hwmon: (lm75) Use HWMON_CHANNEL_INFO macro The HWMON_CHANNEL_INFO macro simplifies the code, reduces the likelihood of errors, and makes the code easier to read. The conversion was done automatically with coccinelle. The semantic patch used to make this change is as follows. @r@ initializer list elements; identifier i; @@ -u32 i[] = { - elements, - 0 -}; @s@ identifier r.i,j,ty; @@ -struct hwmon_channel_info j = { - .type = ty, - .config = i, -}; @script:ocaml t@ ty << s.ty; elements << r.elements; shorter; elems; @@ shorter := make_ident (List.hd(List.rev (Str.split (Str.regexp "_") ty))); elems := make_ident (String.concat "," (List.map (fun x -> Printf.sprintf "\n\t\t\t %s" x) (Str.split (Str.regexp " , ") elements))) @@ identifier s.j,t.shorter; identifier t.elems; @@ - &j + HWMON_CHANNEL_INFO(shorter,elems) This patch does not introduce functional changes. Many thanks to Julia Lawall for providing the semantic patch. Signed-off-by: Guenter Roeck --- drivers/hwmon/lm75.c | 32 ++++---------------------------- 1 file changed, 4 insertions(+), 28 deletions(-) diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c index 447af07450f1..3155a04c997e 100644 --- a/drivers/hwmon/lm75.c +++ b/drivers/hwmon/lm75.c @@ -194,35 +194,11 @@ static umode_t lm75_is_visible(const void *data, enum hwmon_sensor_types type, return 0; } -/*-----------------------------------------------------------------------*/ - -/* device probe and removal */ - -/* chip configuration */ - -static const u32 lm75_chip_config[] = { - HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL, - 0 -}; - -static const struct hwmon_channel_info lm75_chip = { - .type = hwmon_chip, - .config = lm75_chip_config, -}; - -static const u32 lm75_temp_config[] = { - HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST, - 0 -}; - -static const struct hwmon_channel_info lm75_temp = { - .type = hwmon_temp, - .config = lm75_temp_config, -}; - static const struct hwmon_channel_info *lm75_info[] = { - &lm75_chip, - &lm75_temp, + HWMON_CHANNEL_INFO(chip, + HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL), + HWMON_CHANNEL_INFO(temp, + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST), NULL }; From a4d41e6730b85ecb992a8084b11168b613e90b7d Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sun, 31 Mar 2019 10:53:48 -0700 Subject: [PATCH 014/125] hwmon: (lm90) Use HWMON_CHANNEL_INFO macro The HWMON_CHANNEL_INFO macro simplifies the code, reduces the likelihood of errors, and makes the code easier to read. The conversion was done automatically with coccinelle. The semantic patch used to make this change is as follows. @r@ initializer list elements; identifier i; @@ -u32 i[] = { - elements, - 0 -}; @s@ identifier r.i,j,ty; @@ -struct hwmon_channel_info j = { - .type = ty, - .config = i, -}; @script:ocaml t@ ty << s.ty; elements << r.elements; shorter; elems; @@ shorter := make_ident (List.hd(List.rev (Str.split (Str.regexp "_") ty))); elems := make_ident (String.concat "," (List.map (fun x -> Printf.sprintf "\n\t\t\t %s" x) (Str.split (Str.regexp " , ") elements))) @@ identifier s.j,t.shorter; identifier t.elems; @@ - &j + HWMON_CHANNEL_INFO(shorter,elems) This patch does not introduce functional changes. Many thanks to Julia Lawall for providing the semantic patch. Signed-off-by: Guenter Roeck --- drivers/hwmon/lm90.c | 13 ++----------- 1 file changed, 2 insertions(+), 11 deletions(-) diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index 480d70a51778..0f9c22b21ffa 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -1720,16 +1720,6 @@ static void lm90_regulator_disable(void *regulator) regulator_disable(regulator); } -static const u32 lm90_chip_config[] = { - HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL | HWMON_C_ALARMS, - 0 -}; - -static const struct hwmon_channel_info lm90_chip_info = { - .type = hwmon_chip, - .config = lm90_chip_config, -}; - static const struct hwmon_ops lm90_ops = { .is_visible = lm90_is_visible, @@ -1792,7 +1782,8 @@ static int lm90_probe(struct i2c_client *client, data->chip.ops = &lm90_ops; data->chip.info = data->info; - data->info[0] = &lm90_chip_info; + data->info[0] = HWMON_CHANNEL_INFO(chip, + HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL | HWMON_C_ALARMS); data->info[1] = &data->temp_info; info = &data->temp_info; From f5011f9fc287a7894abf83c70bebdbf905dd0f78 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sun, 31 Mar 2019 10:53:48 -0700 Subject: [PATCH 015/125] hwmon: (lm95241) Use HWMON_CHANNEL_INFO macro The HWMON_CHANNEL_INFO macro simplifies the code, reduces the likelihood of errors, and makes the code easier to read. The conversion was done automatically with coccinelle. The semantic patch used to make this change is as follows. @r@ initializer list elements; identifier i; @@ -u32 i[] = { - elements, - 0 -}; @s@ identifier r.i,j,ty; @@ -struct hwmon_channel_info j = { - .type = ty, - .config = i, -}; @script:ocaml t@ ty << s.ty; elements << r.elements; shorter; elems; @@ shorter := make_ident (List.hd(List.rev (Str.split (Str.regexp "_") ty))); elems := make_ident (String.concat "," (List.map (fun x -> Printf.sprintf "\n\t\t\t %s" x) (Str.split (Str.regexp " , ") elements))) @@ identifier s.j,t.shorter; identifier t.elems; @@ - &j + HWMON_CHANNEL_INFO(shorter,elems) This patch does not introduce functional changes. Many thanks to Julia Lawall for providing the semantic patch. Signed-off-by: Guenter Roeck --- drivers/hwmon/lm95241.c | 34 ++++++++-------------------------- 1 file changed, 8 insertions(+), 26 deletions(-) diff --git a/drivers/hwmon/lm95241.c b/drivers/hwmon/lm95241.c index 3ff188937158..6c5215e6d448 100644 --- a/drivers/hwmon/lm95241.c +++ b/drivers/hwmon/lm95241.c @@ -418,33 +418,15 @@ static void lm95241_init_client(struct i2c_client *client, data->model); } -static const u32 lm95241_chip_config[] = { - HWMON_C_UPDATE_INTERVAL, - 0 -}; - -static const struct hwmon_channel_info lm95241_chip = { - .type = hwmon_chip, - .config = lm95241_chip_config, -}; - -static const u32 lm95241_temp_config[] = { - HWMON_T_INPUT, - HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MIN | HWMON_T_TYPE | - HWMON_T_FAULT, - HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MIN | HWMON_T_TYPE | - HWMON_T_FAULT, - 0 -}; - -static const struct hwmon_channel_info lm95241_temp = { - .type = hwmon_temp, - .config = lm95241_temp_config, -}; - static const struct hwmon_channel_info *lm95241_info[] = { - &lm95241_chip, - &lm95241_temp, + HWMON_CHANNEL_INFO(chip, + HWMON_C_UPDATE_INTERVAL), + HWMON_CHANNEL_INFO(temp, + HWMON_T_INPUT, + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MIN | + HWMON_T_TYPE | HWMON_T_FAULT, + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MIN | + HWMON_T_TYPE | HWMON_T_FAULT), NULL }; From 7aea00647f9cfeae775520398e912dd17100606a Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sun, 31 Mar 2019 10:53:48 -0700 Subject: [PATCH 016/125] hwmon: (lm95245) Use HWMON_CHANNEL_INFO macro The HWMON_CHANNEL_INFO macro simplifies the code, reduces the likelihood of errors, and makes the code easier to read. The conversion was done automatically with coccinelle. The semantic patch used to make this change is as follows. @r@ initializer list elements; identifier i; @@ -u32 i[] = { - elements, - 0 -}; @s@ identifier r.i,j,ty; @@ -struct hwmon_channel_info j = { - .type = ty, - .config = i, -}; @script:ocaml t@ ty << s.ty; elements << r.elements; shorter; elems; @@ shorter := make_ident (List.hd(List.rev (Str.split (Str.regexp "_") ty))); elems := make_ident (String.concat "," (List.map (fun x -> Printf.sprintf "\n\t\t\t %s" x) (Str.split (Str.regexp " , ") elements))) @@ identifier s.j,t.shorter; identifier t.elems; @@ - &j + HWMON_CHANNEL_INFO(shorter,elems) This patch does not introduce functional changes. Many thanks to Julia Lawall for providing the semantic patch. Signed-off-by: Guenter Roeck --- drivers/hwmon/lm95245.c | 34 +++++++++------------------------- 1 file changed, 9 insertions(+), 25 deletions(-) diff --git a/drivers/hwmon/lm95245.c b/drivers/hwmon/lm95245.c index e4cac3a04536..c7e04f28ac90 100644 --- a/drivers/hwmon/lm95245.c +++ b/drivers/hwmon/lm95245.c @@ -545,32 +545,16 @@ static const struct regmap_config lm95245_regmap_config = { .use_single_write = true, }; -static const u32 lm95245_chip_config[] = { - HWMON_C_UPDATE_INTERVAL, - 0 -}; - -static const struct hwmon_channel_info lm95245_chip = { - .type = hwmon_chip, - .config = lm95245_chip_config, -}; - -static const u32 lm95245_temp_config[] = { - HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_CRIT_ALARM, - HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST | HWMON_T_CRIT | - HWMON_T_CRIT_HYST | HWMON_T_FAULT | HWMON_T_MAX_ALARM | - HWMON_T_CRIT_ALARM | HWMON_T_TYPE | HWMON_T_OFFSET, - 0 -}; - -static const struct hwmon_channel_info lm95245_temp = { - .type = hwmon_temp, - .config = lm95245_temp_config, -}; - static const struct hwmon_channel_info *lm95245_info[] = { - &lm95245_chip, - &lm95245_temp, + HWMON_CHANNEL_INFO(chip, + HWMON_C_UPDATE_INTERVAL), + HWMON_CHANNEL_INFO(temp, + HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_HYST | + HWMON_T_CRIT_ALARM, + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST | + HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_FAULT | + HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM | + HWMON_T_TYPE | HWMON_T_OFFSET), NULL }; From 0ee508f0cd5188911f449c9b82123c9fe3b7dff5 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sun, 31 Mar 2019 10:53:48 -0700 Subject: [PATCH 017/125] hwmon: (ltc4245) Use HWMON_CHANNEL_INFO macro The HWMON_CHANNEL_INFO macro simplifies the code, reduces the likelihood of errors, and makes the code easier to read. The conversion was done automatically with coccinelle. The semantic patch used to make this change is as follows. @r@ initializer list elements; identifier i; @@ -u32 i[] = { - elements, - 0 -}; @s@ identifier r.i,j,ty; @@ -struct hwmon_channel_info j = { - .type = ty, - .config = i, -}; @script:ocaml t@ ty << s.ty; elements << r.elements; shorter; elems; @@ shorter := make_ident (List.hd(List.rev (Str.split (Str.regexp "_") ty))); elems := make_ident (String.concat "," (List.map (fun x -> Printf.sprintf "\n\t\t\t %s" x) (Str.split (Str.regexp " , ") elements))) @@ identifier s.j,t.shorter; identifier t.elems; @@ - &j + HWMON_CHANNEL_INFO(shorter,elems) This patch does not introduce functional changes. Many thanks to Julia Lawall for providing the semantic patch. Signed-off-by: Guenter Roeck --- drivers/hwmon/ltc4245.c | 73 +++++++++++++---------------------------- 1 file changed, 23 insertions(+), 50 deletions(-) diff --git a/drivers/hwmon/ltc4245.c b/drivers/hwmon/ltc4245.c index 34d0653ca607..26542635de9b 100644 --- a/drivers/hwmon/ltc4245.c +++ b/drivers/hwmon/ltc4245.c @@ -390,57 +390,30 @@ static umode_t ltc4245_is_visible(const void *_data, } } -static const u32 ltc4245_in_config[] = { - HWMON_I_INPUT, /* dummy, skipped in is_visible */ - HWMON_I_INPUT | HWMON_I_MIN_ALARM, - HWMON_I_INPUT | HWMON_I_MIN_ALARM, - HWMON_I_INPUT | HWMON_I_MIN_ALARM, - HWMON_I_INPUT | HWMON_I_MIN_ALARM, - HWMON_I_INPUT | HWMON_I_MIN_ALARM, - HWMON_I_INPUT | HWMON_I_MIN_ALARM, - HWMON_I_INPUT | HWMON_I_MIN_ALARM, - HWMON_I_INPUT | HWMON_I_MIN_ALARM, - HWMON_I_INPUT, - HWMON_I_INPUT, - HWMON_I_INPUT, - 0 -}; - -static const struct hwmon_channel_info ltc4245_in = { - .type = hwmon_in, - .config = ltc4245_in_config, -}; - -static const u32 ltc4245_curr_config[] = { - HWMON_C_INPUT | HWMON_C_MAX_ALARM, - HWMON_C_INPUT | HWMON_C_MAX_ALARM, - HWMON_C_INPUT | HWMON_C_MAX_ALARM, - HWMON_C_INPUT | HWMON_C_MAX_ALARM, - 0 -}; - -static const struct hwmon_channel_info ltc4245_curr = { - .type = hwmon_curr, - .config = ltc4245_curr_config, -}; - -static const u32 ltc4245_power_config[] = { - HWMON_P_INPUT, - HWMON_P_INPUT, - HWMON_P_INPUT, - HWMON_P_INPUT, - 0 -}; - -static const struct hwmon_channel_info ltc4245_power = { - .type = hwmon_power, - .config = ltc4245_power_config, -}; - static const struct hwmon_channel_info *ltc4245_info[] = { - <c4245_in, - <c4245_curr, - <c4245_power, + HWMON_CHANNEL_INFO(in, + HWMON_I_INPUT, + HWMON_I_INPUT | HWMON_I_MIN_ALARM, + HWMON_I_INPUT | HWMON_I_MIN_ALARM, + HWMON_I_INPUT | HWMON_I_MIN_ALARM, + HWMON_I_INPUT | HWMON_I_MIN_ALARM, + HWMON_I_INPUT | HWMON_I_MIN_ALARM, + HWMON_I_INPUT | HWMON_I_MIN_ALARM, + HWMON_I_INPUT | HWMON_I_MIN_ALARM, + HWMON_I_INPUT | HWMON_I_MIN_ALARM, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT), + HWMON_CHANNEL_INFO(curr, + HWMON_C_INPUT | HWMON_C_MAX_ALARM, + HWMON_C_INPUT | HWMON_C_MAX_ALARM, + HWMON_C_INPUT | HWMON_C_MAX_ALARM, + HWMON_C_INPUT | HWMON_C_MAX_ALARM), + HWMON_CHANNEL_INFO(power, + HWMON_P_INPUT, + HWMON_P_INPUT, + HWMON_P_INPUT, + HWMON_P_INPUT), NULL }; From f4a407f4ddf078f0f6b04e4b67befa00bb9cce45 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sun, 31 Mar 2019 10:53:49 -0700 Subject: [PATCH 018/125] hwmon: (ltq-cputemp) Use HWMON_CHANNEL_INFO macro The HWMON_CHANNEL_INFO macro simplifies the code, reduces the likelihood of errors, and makes the code easier to read. The conversion was done automatically with coccinelle. The semantic patch used to make this change is as follows. @r@ initializer list elements; identifier i; @@ -u32 i[] = { - elements, - 0 -}; @s@ identifier r.i,j,ty; @@ -struct hwmon_channel_info j = { - .type = ty, - .config = i, -}; @script:ocaml t@ ty << s.ty; elements << r.elements; shorter; elems; @@ shorter := make_ident (List.hd(List.rev (Str.split (Str.regexp "_") ty))); elems := make_ident (String.concat "," (List.map (fun x -> Printf.sprintf "\n\t\t\t %s" x) (Str.split (Str.regexp " , ") elements))) @@ identifier s.j,t.shorter; identifier t.elems; @@ - &j + HWMON_CHANNEL_INFO(shorter,elems) This patch does not introduce functional changes. Many thanks to Julia Lawall for providing the semantic patch. Signed-off-by: Guenter Roeck --- drivers/hwmon/ltq-cputemp.c | 26 ++++---------------------- 1 file changed, 4 insertions(+), 22 deletions(-) diff --git a/drivers/hwmon/ltq-cputemp.c b/drivers/hwmon/ltq-cputemp.c index 1d33f94594c1..570791f0e024 100644 --- a/drivers/hwmon/ltq-cputemp.c +++ b/drivers/hwmon/ltq-cputemp.c @@ -77,29 +77,11 @@ static umode_t ltq_is_visible(const void *_data, enum hwmon_sensor_types type, } } -static const u32 ltq_chip_config[] = { - HWMON_C_REGISTER_TZ, - 0 -}; - -static const struct hwmon_channel_info ltq_chip = { - .type = hwmon_chip, - .config = ltq_chip_config, -}; - -static const u32 ltq_temp_config[] = { - HWMON_T_INPUT, - 0 -}; - -static const struct hwmon_channel_info ltq_temp = { - .type = hwmon_temp, - .config = ltq_temp_config, -}; - static const struct hwmon_channel_info *ltq_info[] = { - <q_chip, - <q_temp, + HWMON_CHANNEL_INFO(chip, + HWMON_C_REGISTER_TZ), + HWMON_CHANNEL_INFO(temp, + HWMON_T_INPUT), NULL }; From b605e671cff60ec66115a5cda1c384f377fb07ce Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sun, 31 Mar 2019 10:53:49 -0700 Subject: [PATCH 019/125] hwmon: (max31790) Use HWMON_CHANNEL_INFO macro The HWMON_CHANNEL_INFO macro simplifies the code, reduces the likelihood of errors, and makes the code easier to read. The conversion was done automatically with coccinelle. The semantic patch used to make this change is as follows. @r@ initializer list elements; identifier i; @@ -u32 i[] = { - elements, - 0 -}; @s@ identifier r.i,j,ty; @@ -struct hwmon_channel_info j = { - .type = ty, - .config = i, -}; @script:ocaml t@ ty << s.ty; elements << r.elements; shorter; elems; @@ shorter := make_ident (List.hd(List.rev (Str.split (Str.regexp "_") ty))); elems := make_ident (String.concat "," (List.map (fun x -> Printf.sprintf "\n\t\t\t %s" x) (Str.split (Str.regexp " , ") elements))) @@ identifier s.j,t.shorter; identifier t.elems; @@ - &j + HWMON_CHANNEL_INFO(shorter,elems) This patch does not introduce functional changes. Many thanks to Julia Lawall for providing the semantic patch. Signed-off-by: Guenter Roeck --- drivers/hwmon/max31790.c | 58 ++++++++++++++-------------------------- 1 file changed, 20 insertions(+), 38 deletions(-) diff --git a/drivers/hwmon/max31790.c b/drivers/hwmon/max31790.c index 722bcbb9865a..0b0b04d36931 100644 --- a/drivers/hwmon/max31790.c +++ b/drivers/hwmon/max31790.c @@ -400,45 +400,27 @@ static umode_t max31790_is_visible(const void *data, } } -static const u32 max31790_fan_config[] = { - HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT, - HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT, - HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT, - HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT, - HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT, - HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT, - HWMON_F_INPUT | HWMON_F_FAULT, - HWMON_F_INPUT | HWMON_F_FAULT, - HWMON_F_INPUT | HWMON_F_FAULT, - HWMON_F_INPUT | HWMON_F_FAULT, - HWMON_F_INPUT | HWMON_F_FAULT, - HWMON_F_INPUT | HWMON_F_FAULT, - 0 -}; - -static const struct hwmon_channel_info max31790_fan = { - .type = hwmon_fan, - .config = max31790_fan_config, -}; - -static const u32 max31790_pwm_config[] = { - HWMON_PWM_INPUT | HWMON_PWM_ENABLE, - HWMON_PWM_INPUT | HWMON_PWM_ENABLE, - HWMON_PWM_INPUT | HWMON_PWM_ENABLE, - HWMON_PWM_INPUT | HWMON_PWM_ENABLE, - HWMON_PWM_INPUT | HWMON_PWM_ENABLE, - HWMON_PWM_INPUT | HWMON_PWM_ENABLE, - 0 -}; - -static const struct hwmon_channel_info max31790_pwm = { - .type = hwmon_pwm, - .config = max31790_pwm_config, -}; - static const struct hwmon_channel_info *max31790_info[] = { - &max31790_fan, - &max31790_pwm, + HWMON_CHANNEL_INFO(fan, + HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT), + HWMON_CHANNEL_INFO(pwm, + HWMON_PWM_INPUT | HWMON_PWM_ENABLE, + HWMON_PWM_INPUT | HWMON_PWM_ENABLE, + HWMON_PWM_INPUT | HWMON_PWM_ENABLE, + HWMON_PWM_INPUT | HWMON_PWM_ENABLE, + HWMON_PWM_INPUT | HWMON_PWM_ENABLE, + HWMON_PWM_INPUT | HWMON_PWM_ENABLE), NULL }; From dcb00ee817b41a43e907652219b88087aacd3d8d Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sun, 31 Mar 2019 10:53:49 -0700 Subject: [PATCH 020/125] hwmon: (max6621) Use HWMON_CHANNEL_INFO macro The HWMON_CHANNEL_INFO macro simplifies the code, reduces the likelihood of errors, and makes the code easier to read. The conversion was done automatically with coccinelle. The semantic patch used to make this change is as follows. @r@ initializer list elements; identifier i; @@ -u32 i[] = { - elements, - 0 -}; @s@ identifier r.i,j,ty; @@ -struct hwmon_channel_info j = { - .type = ty, - .config = i, -}; @script:ocaml t@ ty << s.ty; elements << r.elements; shorter; elems; @@ shorter := make_ident (List.hd(List.rev (Str.split (Str.regexp "_") ty))); elems := make_ident (String.concat "," (List.map (fun x -> Printf.sprintf "\n\t\t\t %s" x) (Str.split (Str.regexp " , ") elements))) @@ identifier s.j,t.shorter; identifier t.elems; @@ - &j + HWMON_CHANNEL_INFO(shorter,elems) This patch does not introduce functional changes. Many thanks to Julia Lawall for providing the semantic patch. Signed-off-by: Guenter Roeck --- drivers/hwmon/max6621.c | 42 ++++++++++++----------------------------- 1 file changed, 12 insertions(+), 30 deletions(-) diff --git a/drivers/hwmon/max6621.c b/drivers/hwmon/max6621.c index 35555f0eefb9..0c399e407de3 100644 --- a/drivers/hwmon/max6621.c +++ b/drivers/hwmon/max6621.c @@ -458,37 +458,19 @@ static const struct regmap_config max6621_regmap_config = { .num_reg_defaults = ARRAY_SIZE(max6621_regmap_default), }; -static u32 max6621_chip_config[] = { - HWMON_C_REGISTER_TZ, - 0 -}; - -static const struct hwmon_channel_info max6621_chip = { - .type = hwmon_chip, - .config = max6621_chip_config, -}; - -static const u32 max6621_temp_config[] = { - HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_OFFSET, - HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_LABEL, - HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_LABEL, - HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_LABEL, - HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_LABEL, - HWMON_T_INPUT | HWMON_T_LABEL, - HWMON_T_INPUT | HWMON_T_LABEL, - HWMON_T_INPUT | HWMON_T_LABEL, - HWMON_T_INPUT | HWMON_T_LABEL, - 0 -}; - -static const struct hwmon_channel_info max6621_temp = { - .type = hwmon_temp, - .config = max6621_temp_config, -}; - static const struct hwmon_channel_info *max6621_info[] = { - &max6621_chip, - &max6621_temp, + HWMON_CHANNEL_INFO(chip, + HWMON_C_REGISTER_TZ), + HWMON_CHANNEL_INFO(temp, + HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_OFFSET, + HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_LABEL), NULL }; From 725dcf082c878bd62ccb05f544884db534f7d1a4 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sun, 31 Mar 2019 10:53:50 -0700 Subject: [PATCH 021/125] hwmon: (mlxreg-fan) Use HWMON_CHANNEL_INFO macro The HWMON_CHANNEL_INFO macro simplifies the code, reduces the likelihood of errors, and makes the code easier to read. The conversion was done automatically with coccinelle. The semantic patch used to make this change is as follows. @r@ initializer list elements; identifier i; @@ -u32 i[] = { - elements, - 0 -}; @s@ identifier r.i,j,ty; @@ -struct hwmon_channel_info j = { - .type = ty, - .config = i, -}; @script:ocaml t@ ty << s.ty; elements << r.elements; shorter; elems; @@ shorter := make_ident (List.hd(List.rev (Str.split (Str.regexp "_") ty))); elems := make_ident (String.concat "," (List.map (fun x -> Printf.sprintf "\n\t\t\t %s" x) (Str.split (Str.regexp " , ") elements))) @@ identifier s.j,t.shorter; identifier t.elems; @@ - &j + HWMON_CHANNEL_INFO(shorter,elems) This patch does not introduce functional changes. Many thanks to Julia Lawall for providing the semantic patch. Signed-off-by: Guenter Roeck --- drivers/hwmon/mlxreg-fan.c | 48 ++++++++++++-------------------------- 1 file changed, 15 insertions(+), 33 deletions(-) diff --git a/drivers/hwmon/mlxreg-fan.c b/drivers/hwmon/mlxreg-fan.c index 44d4b1af1550..f816d2ae1e58 100644 --- a/drivers/hwmon/mlxreg-fan.c +++ b/drivers/hwmon/mlxreg-fan.c @@ -229,40 +229,22 @@ mlxreg_fan_is_visible(const void *data, enum hwmon_sensor_types type, u32 attr, return 0; } -static const u32 mlxreg_fan_hwmon_fan_config[] = { - HWMON_F_INPUT | HWMON_F_FAULT, - HWMON_F_INPUT | HWMON_F_FAULT, - HWMON_F_INPUT | HWMON_F_FAULT, - HWMON_F_INPUT | HWMON_F_FAULT, - HWMON_F_INPUT | HWMON_F_FAULT, - HWMON_F_INPUT | HWMON_F_FAULT, - HWMON_F_INPUT | HWMON_F_FAULT, - HWMON_F_INPUT | HWMON_F_FAULT, - HWMON_F_INPUT | HWMON_F_FAULT, - HWMON_F_INPUT | HWMON_F_FAULT, - HWMON_F_INPUT | HWMON_F_FAULT, - HWMON_F_INPUT | HWMON_F_FAULT, - 0 -}; - -static const struct hwmon_channel_info mlxreg_fan_hwmon_fan = { - .type = hwmon_fan, - .config = mlxreg_fan_hwmon_fan_config, -}; - -static const u32 mlxreg_fan_hwmon_pwm_config[] = { - HWMON_PWM_INPUT, - 0 -}; - -static const struct hwmon_channel_info mlxreg_fan_hwmon_pwm = { - .type = hwmon_pwm, - .config = mlxreg_fan_hwmon_pwm_config, -}; - static const struct hwmon_channel_info *mlxreg_fan_hwmon_info[] = { - &mlxreg_fan_hwmon_fan, - &mlxreg_fan_hwmon_pwm, + HWMON_CHANNEL_INFO(fan, + HWMON_F_INPUT | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT), + HWMON_CHANNEL_INFO(pwm, + HWMON_PWM_INPUT), NULL }; From dfeace08338cfb8bd993f769655015a7608b28da Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sun, 31 Mar 2019 10:53:50 -0700 Subject: [PATCH 022/125] hwmon: (npcm750-pwm-fan) Use HWMON_CHANNEL_INFO macro The HWMON_CHANNEL_INFO macro simplifies the code, reduces the likelihood of errors, and makes the code easier to read. The conversion was done automatically with coccinelle. The semantic patch used to make this change is as follows. @r@ initializer list elements; identifier i; @@ -u32 i[] = { - elements, - 0 -}; @s@ identifier r.i,j,ty; @@ -struct hwmon_channel_info j = { - .type = ty, - .config = i, -}; @script:ocaml t@ ty << s.ty; elements << r.elements; shorter; elems; @@ shorter := make_ident (List.hd(List.rev (Str.split (Str.regexp "_") ty))); elems := make_ident (String.concat "," (List.map (fun x -> Printf.sprintf "\n\t\t\t %s" x) (Str.split (Str.regexp " , ") elements))) @@ identifier s.j,t.shorter; identifier t.elems; @@ - &j + HWMON_CHANNEL_INFO(shorter,elems) This patch does not introduce functional changes. Many thanks to Julia Lawall for providing the semantic patch. Cc: Avi Fishman Cc: Tomer Maimon Cc: Patrick Venture Cc: Nancy Yuen Cc: Brendan Higgins Signed-off-by: Guenter Roeck --- drivers/hwmon/npcm750-pwm-fan.c | 70 ++++++++++++--------------------- 1 file changed, 26 insertions(+), 44 deletions(-) diff --git a/drivers/hwmon/npcm750-pwm-fan.c b/drivers/hwmon/npcm750-pwm-fan.c index b3b907bdfb63..1dc0cd452498 100644 --- a/drivers/hwmon/npcm750-pwm-fan.c +++ b/drivers/hwmon/npcm750-pwm-fan.c @@ -629,51 +629,33 @@ static umode_t npcm7xx_is_visible(const void *data, } } -static const u32 npcm7xx_pwm_config[] = { - HWMON_PWM_INPUT, - HWMON_PWM_INPUT, - HWMON_PWM_INPUT, - HWMON_PWM_INPUT, - HWMON_PWM_INPUT, - HWMON_PWM_INPUT, - HWMON_PWM_INPUT, - HWMON_PWM_INPUT, - 0 -}; - -static const struct hwmon_channel_info npcm7xx_pwm = { - .type = hwmon_pwm, - .config = npcm7xx_pwm_config, -}; - -static const u32 npcm7xx_fan_config[] = { - HWMON_F_INPUT, - HWMON_F_INPUT, - HWMON_F_INPUT, - HWMON_F_INPUT, - HWMON_F_INPUT, - HWMON_F_INPUT, - HWMON_F_INPUT, - HWMON_F_INPUT, - HWMON_F_INPUT, - HWMON_F_INPUT, - HWMON_F_INPUT, - HWMON_F_INPUT, - HWMON_F_INPUT, - HWMON_F_INPUT, - HWMON_F_INPUT, - HWMON_F_INPUT, - 0 -}; - -static const struct hwmon_channel_info npcm7xx_fan = { - .type = hwmon_fan, - .config = npcm7xx_fan_config, -}; - static const struct hwmon_channel_info *npcm7xx_info[] = { - &npcm7xx_pwm, - &npcm7xx_fan, + HWMON_CHANNEL_INFO(pwm, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT), + HWMON_CHANNEL_INFO(fan, + HWMON_F_INPUT, + HWMON_F_INPUT, + HWMON_F_INPUT, + HWMON_F_INPUT, + HWMON_F_INPUT, + HWMON_F_INPUT, + HWMON_F_INPUT, + HWMON_F_INPUT, + HWMON_F_INPUT, + HWMON_F_INPUT, + HWMON_F_INPUT, + HWMON_F_INPUT, + HWMON_F_INPUT, + HWMON_F_INPUT, + HWMON_F_INPUT, + HWMON_F_INPUT), NULL }; From 0c42186e3976b92c5d167aeda3e0894103353254 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sun, 31 Mar 2019 10:53:50 -0700 Subject: [PATCH 023/125] hwmon: (raspberrypi-hwmon) Use HWMON_CHANNEL_INFO macro The HWMON_CHANNEL_INFO macro simplifies the code, reduces the likelihood of errors, and makes the code easier to read. The conversion was done automatically with coccinelle. The semantic patch used to make this change is as follows. @r@ initializer list elements; identifier i; @@ -u32 i[] = { - elements, - 0 -}; @s@ identifier r.i,j,ty; @@ -struct hwmon_channel_info j = { - .type = ty, - .config = i, -}; @script:ocaml t@ ty << s.ty; elements << r.elements; shorter; elems; @@ shorter := make_ident (List.hd(List.rev (Str.split (Str.regexp "_") ty))); elems := make_ident (String.concat "," (List.map (fun x -> Printf.sprintf "\n\t\t\t %s" x) (Str.split (Str.regexp " , ") elements))) @@ identifier s.j,t.shorter; identifier t.elems; @@ - &j + HWMON_CHANNEL_INFO(shorter,elems) This patch does not introduce functional changes. Many thanks to Julia Lawall for providing the semantic patch. Signed-off-by: Guenter Roeck --- drivers/hwmon/raspberrypi-hwmon.c | 13 ++----------- 1 file changed, 2 insertions(+), 11 deletions(-) diff --git a/drivers/hwmon/raspberrypi-hwmon.c b/drivers/hwmon/raspberrypi-hwmon.c index 0d0457245e7d..efe4bb1ff221 100644 --- a/drivers/hwmon/raspberrypi-hwmon.c +++ b/drivers/hwmon/raspberrypi-hwmon.c @@ -86,18 +86,9 @@ static umode_t rpi_is_visible(const void *_data, enum hwmon_sensor_types type, return 0444; } -static const u32 rpi_in_config[] = { - HWMON_I_LCRIT_ALARM, - 0 -}; - -static const struct hwmon_channel_info rpi_in = { - .type = hwmon_in, - .config = rpi_in_config, -}; - static const struct hwmon_channel_info *rpi_info[] = { - &rpi_in, + HWMON_CHANNEL_INFO(in, + HWMON_I_LCRIT_ALARM), NULL }; From 880782547272d0c3bb47798b1de24d6d3eaa73f6 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sun, 31 Mar 2019 10:53:50 -0700 Subject: [PATCH 024/125] hwmon: (tmp102) Use HWMON_CHANNEL_INFO macro The HWMON_CHANNEL_INFO macro simplifies the code, reduces the likelihood of errors, and makes the code easier to read. The conversion was done automatically with coccinelle. The semantic patch used to make this change is as follows. @r@ initializer list elements; identifier i; @@ -u32 i[] = { - elements, - 0 -}; @s@ identifier r.i,j,ty; @@ -struct hwmon_channel_info j = { - .type = ty, - .config = i, -}; @script:ocaml t@ ty << s.ty; elements << r.elements; shorter; elems; @@ shorter := make_ident (List.hd(List.rev (Str.split (Str.regexp "_") ty))); elems := make_ident (String.concat "," (List.map (fun x -> Printf.sprintf "\n\t\t\t %s" x) (Str.split (Str.regexp " , ") elements))) @@ identifier s.j,t.shorter; identifier t.elems; @@ - &j + HWMON_CHANNEL_INFO(shorter,elems) This patch does not introduce functional changes. Many thanks to Julia Lawall for providing the semantic patch. Signed-off-by: Guenter Roeck --- drivers/hwmon/tmp102.c | 26 ++++---------------------- 1 file changed, 4 insertions(+), 22 deletions(-) diff --git a/drivers/hwmon/tmp102.c b/drivers/hwmon/tmp102.c index 35523d315f25..213564aad005 100644 --- a/drivers/hwmon/tmp102.c +++ b/drivers/hwmon/tmp102.c @@ -150,29 +150,11 @@ static umode_t tmp102_is_visible(const void *data, enum hwmon_sensor_types type, } } -static u32 tmp102_chip_config[] = { - HWMON_C_REGISTER_TZ, - 0 -}; - -static const struct hwmon_channel_info tmp102_chip = { - .type = hwmon_chip, - .config = tmp102_chip_config, -}; - -static u32 tmp102_temp_config[] = { - HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST, - 0 -}; - -static const struct hwmon_channel_info tmp102_temp = { - .type = hwmon_temp, - .config = tmp102_temp_config, -}; - static const struct hwmon_channel_info *tmp102_info[] = { - &tmp102_chip, - &tmp102_temp, + HWMON_CHANNEL_INFO(chip, + HWMON_C_REGISTER_TZ), + HWMON_CHANNEL_INFO(temp, + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST), NULL }; From 6cbd4926a2ac1c86ac2e467a2e1987e9504a7b67 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sun, 31 Mar 2019 10:53:51 -0700 Subject: [PATCH 025/125] hwmon: (tmp108) Use HWMON_CHANNEL_INFO macro The HWMON_CHANNEL_INFO macro simplifies the code, reduces the likelihood of errors, and makes the code easier to read. The conversion was done automatically with coccinelle. The semantic patch used to make this change is as follows. @r@ initializer list elements; identifier i; @@ -u32 i[] = { - elements, - 0 -}; @s@ identifier r.i,j,ty; @@ -struct hwmon_channel_info j = { - .type = ty, - .config = i, -}; @script:ocaml t@ ty << s.ty; elements << r.elements; shorter; elems; @@ shorter := make_ident (List.hd(List.rev (Str.split (Str.regexp "_") ty))); elems := make_ident (String.concat "," (List.map (fun x -> Printf.sprintf "\n\t\t\t %s" x) (Str.split (Str.regexp " , ") elements))) @@ identifier s.j,t.shorter; identifier t.elems; @@ - &j + HWMON_CHANNEL_INFO(shorter,elems) This patch does not introduce functional changes. Many thanks to Julia Lawall for providing the semantic patch. Signed-off-by: Guenter Roeck --- drivers/hwmon/tmp108.c | 29 ++++++----------------------- 1 file changed, 6 insertions(+), 23 deletions(-) diff --git a/drivers/hwmon/tmp108.c b/drivers/hwmon/tmp108.c index 429bfeae4ca8..2447af704424 100644 --- a/drivers/hwmon/tmp108.c +++ b/drivers/hwmon/tmp108.c @@ -281,30 +281,13 @@ static umode_t tmp108_is_visible(const void *data, enum hwmon_sensor_types type, } } -static u32 tmp108_chip_config[] = { - HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL, - 0 -}; - -static const struct hwmon_channel_info tmp108_chip = { - .type = hwmon_chip, - .config = tmp108_chip_config, -}; - -static u32 tmp108_temp_config[] = { - HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MIN | HWMON_T_MIN_HYST - | HWMON_T_MAX_HYST | HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM, - 0 -}; - -static const struct hwmon_channel_info tmp108_temp = { - .type = hwmon_temp, - .config = tmp108_temp_config, -}; - static const struct hwmon_channel_info *tmp108_info[] = { - &tmp108_chip, - &tmp108_temp, + HWMON_CHANNEL_INFO(chip, + HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL), + HWMON_CHANNEL_INFO(temp, + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MIN | + HWMON_T_MIN_HYST | HWMON_T_MAX_HYST | + HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM), NULL }; From 2f2defda176cc885ca1356601a2aa5aef53ae253 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sun, 31 Mar 2019 10:53:51 -0700 Subject: [PATCH 026/125] hwmon: (w83773g) Use HWMON_CHANNEL_INFO macro The HWMON_CHANNEL_INFO macro simplifies the code, reduces the likelihood of errors, and makes the code easier to read. The conversion was done automatically with coccinelle. The semantic patch used to make this change is as follows. @r@ initializer list elements; identifier i; @@ -u32 i[] = { - elements, - 0 -}; @s@ identifier r.i,j,ty; @@ -struct hwmon_channel_info j = { - .type = ty, - .config = i, -}; @script:ocaml t@ ty << s.ty; elements << r.elements; shorter; elems; @@ shorter := make_ident (List.hd(List.rev (Str.split (Str.regexp "_") ty))); elems := make_ident (String.concat "," (List.map (fun x -> Printf.sprintf "\n\t\t\t %s" x) (Str.split (Str.regexp " , ") elements))) @@ identifier s.j,t.shorter; identifier t.elems; @@ - &j + HWMON_CHANNEL_INFO(shorter,elems) This patch does not introduce functional changes. Many thanks to Julia Lawall for providing the semantic patch. Signed-off-by: Guenter Roeck --- drivers/hwmon/w83773g.c | 30 ++++++------------------------ 1 file changed, 6 insertions(+), 24 deletions(-) diff --git a/drivers/hwmon/w83773g.c b/drivers/hwmon/w83773g.c index e858093ac806..1f34d885db52 100644 --- a/drivers/hwmon/w83773g.c +++ b/drivers/hwmon/w83773g.c @@ -237,31 +237,13 @@ static umode_t w83773_is_visible(const void *data, enum hwmon_sensor_types type, return 0; } -static const u32 w83773_chip_config[] = { - HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL, - 0 -}; - -static const struct hwmon_channel_info w83773_chip = { - .type = hwmon_chip, - .config = w83773_chip_config, -}; - -static const u32 w83773_temp_config[] = { - HWMON_T_INPUT, - HWMON_T_INPUT | HWMON_T_FAULT | HWMON_T_OFFSET, - HWMON_T_INPUT | HWMON_T_FAULT | HWMON_T_OFFSET, - 0 -}; - -static const struct hwmon_channel_info w83773_temp = { - .type = hwmon_temp, - .config = w83773_temp_config, -}; - static const struct hwmon_channel_info *w83773_info[] = { - &w83773_chip, - &w83773_temp, + HWMON_CHANNEL_INFO(chip, + HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL), + HWMON_CHANNEL_INFO(temp, + HWMON_T_INPUT, + HWMON_T_INPUT | HWMON_T_FAULT | HWMON_T_OFFSET, + HWMON_T_INPUT | HWMON_T_FAULT | HWMON_T_OFFSET), NULL }; From 5aaa58734d8876640fe0a730c699ce7b9ea90b1c Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 1 Apr 2019 10:36:41 -0700 Subject: [PATCH 027/125] hwmon: (jz4740) Use devm_platform_ioremap_resource The new helper devm_platform_ioremap_resource() wraps platform_get_resource() and devm_ioremap_resource() together. Use it to simplify the code. Signed-off-by: Guenter Roeck --- drivers/hwmon/jz4740-hwmon.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/hwmon/jz4740-hwmon.c b/drivers/hwmon/jz4740-hwmon.c index 2d40a2e771d7..7d5947595b45 100644 --- a/drivers/hwmon/jz4740-hwmon.c +++ b/drivers/hwmon/jz4740-hwmon.c @@ -94,7 +94,6 @@ static int jz4740_hwmon_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct jz4740_hwmon *hwmon; struct device *hwmon_dev; - struct resource *mem; hwmon = devm_kzalloc(dev, sizeof(*hwmon), GFP_KERNEL); if (!hwmon) @@ -109,8 +108,7 @@ static int jz4740_hwmon_probe(struct platform_device *pdev) return hwmon->irq; } - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - hwmon->base = devm_ioremap_resource(&pdev->dev, mem); + hwmon->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(hwmon->base)) return PTR_ERR(hwmon->base); From cb202bb8b3238f12fdb682e0361be9570b47288d Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Tue, 2 Apr 2019 21:28:11 -0700 Subject: [PATCH 028/125] hwmon: (iio_hwmon) Simplify attr.name generation in iio_hwmon_probe() Since every call to devm_kasprintf() in the switch statement is mostly the same, we can move all of the shared code outside and capture differencies with two helper variables. No functional change intended. Signed-off-by: Andrey Smirnov Cc: Guenter Roeck Signed-off-by: Guenter Roeck --- drivers/hwmon/iio_hwmon.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/drivers/hwmon/iio_hwmon.c b/drivers/hwmon/iio_hwmon.c index 5c3c08449de7..1770423f7a80 100644 --- a/drivers/hwmon/iio_hwmon.c +++ b/drivers/hwmon/iio_hwmon.c @@ -92,6 +92,9 @@ static int iio_hwmon_probe(struct platform_device *pdev) return -ENOMEM; for (i = 0; i < st->num_channels; i++) { + const char *prefix; + int n; + a = devm_kzalloc(dev, sizeof(*a), GFP_KERNEL); if (a == NULL) return -ENOMEM; @@ -103,28 +106,28 @@ static int iio_hwmon_probe(struct platform_device *pdev) switch (type) { case IIO_VOLTAGE: - a->dev_attr.attr.name = devm_kasprintf(dev, GFP_KERNEL, - "in%d_input", - in_i++); + n = in_i++; + prefix = "in"; break; case IIO_TEMP: - a->dev_attr.attr.name = devm_kasprintf(dev, GFP_KERNEL, - "temp%d_input", - temp_i++); + n = temp_i++; + prefix = "temp"; break; case IIO_CURRENT: - a->dev_attr.attr.name = devm_kasprintf(dev, GFP_KERNEL, - "curr%d_input", - curr_i++); + n = curr_i++; + prefix = "curr"; break; case IIO_HUMIDITYRELATIVE: - a->dev_attr.attr.name = devm_kasprintf(dev, GFP_KERNEL, - "humidity%d_input", - humidity_i++); + n = humidity_i++; + prefix = "humidity"; break; default: return -EINVAL; } + + a->dev_attr.attr.name = devm_kasprintf(dev, GFP_KERNEL, + "%s%d_input", + prefix, n); if (a->dev_attr.attr.name == NULL) return -ENOMEM; From 9c6b0f75ea9ce7dc97913c7676987dc8e5b58741 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 4 Apr 2019 06:13:31 -0700 Subject: [PATCH 029/125] hwmon: (pmbus/ucd9200): Mark ucd9200_of_match as maybe_unused MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If CONFIG_OF is not enabled, the following build warning is observed. drivers/hwmon/pmbus/ucd9200.c:50:34: warning: ‘ucd9200_of_match’ defined but not used Mark it as __maybe_unused to fix the problem. Signed-off-by: Guenter Roeck --- drivers/hwmon/pmbus/ucd9200.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/pmbus/ucd9200.c b/drivers/hwmon/pmbus/ucd9200.c index 3ed94585837a..fec7656700db 100644 --- a/drivers/hwmon/pmbus/ucd9200.c +++ b/drivers/hwmon/pmbus/ucd9200.c @@ -47,7 +47,7 @@ static const struct i2c_device_id ucd9200_id[] = { }; MODULE_DEVICE_TABLE(i2c, ucd9200_id); -static const struct of_device_id ucd9200_of_match[] = { +static const struct of_device_id __maybe_unused ucd9200_of_match[] = { { .compatible = "ti,cd9200", .data = (void *)ucd9200 From e91cb17b733f63f8d55c836be76e89d9753c0859 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 4 Apr 2019 06:16:46 -0700 Subject: [PATCH 030/125] hwmon: (pmbus/tps53679) Fix build warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If CONFIG_OF is not enabled, the following build warning is observed. drivers/hwmon/pmbus/tps53679.c:100:34: warning: ‘tps53679_of_match’ defined but not used Marking tps53679_of_match as __maybe_unused fixes the problem. Signed-off-by: Guenter Roeck --- drivers/hwmon/pmbus/tps53679.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/pmbus/tps53679.c b/drivers/hwmon/pmbus/tps53679.c index 2bc352c5357f..3fd5105ee9ae 100644 --- a/drivers/hwmon/pmbus/tps53679.c +++ b/drivers/hwmon/pmbus/tps53679.c @@ -97,7 +97,7 @@ static const struct i2c_device_id tps53679_id[] = { MODULE_DEVICE_TABLE(i2c, tps53679_id); -static const struct of_device_id tps53679_of_match[] = { +static const struct of_device_id __maybe_unused tps53679_of_match[] = { {.compatible = "ti,tps53679"}, {} }; From 64e5116279581c4014476c4e2afabfc5227f2053 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 4 Apr 2019 06:17:49 -0700 Subject: [PATCH 031/125] hwmon: (pmbus/ucd900) Fix build warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If CONFIG_OF is not enabled, the following build warning is observed. drivers/hwmon/pmbus/ucd9000.c:154:34: warning: ‘ucd9000_of_match’ defined but not used Mark ucd9000_of_match as __maybe_unused to fix the problem. Signed-off-by: Guenter Roeck --- drivers/hwmon/pmbus/ucd9000.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/pmbus/ucd9000.c b/drivers/hwmon/pmbus/ucd9000.c index ae93885fccd8..40a3e3d0e661 100644 --- a/drivers/hwmon/pmbus/ucd9000.c +++ b/drivers/hwmon/pmbus/ucd9000.c @@ -151,7 +151,7 @@ static const struct i2c_device_id ucd9000_id[] = { }; MODULE_DEVICE_TABLE(i2c, ucd9000_id); -static const struct of_device_id ucd9000_of_match[] = { +static const struct of_device_id __maybe_unused ucd9000_of_match[] = { { .compatible = "ti,ucd9000", .data = (void *)ucd9000 From a90cdd134546ddc545ba1bcba8bdf1489bf6bee6 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 4 Apr 2019 06:19:50 -0700 Subject: [PATCH 032/125] hwmon: (ltc4151) Fix build warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If CONFIG_OF is not enabled, the following build warning is observed. drivers/hwmon/ltc4151.c:211:34: warning: ‘ltc4151_match’ defined but not used Mark ltc4151_match as __maybe_unused to fix the problem. Signed-off-by: Guenter Roeck --- drivers/hwmon/ltc4151.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/ltc4151.c b/drivers/hwmon/ltc4151.c index 76c6fda76d95..2b5cd37e6dc3 100644 --- a/drivers/hwmon/ltc4151.c +++ b/drivers/hwmon/ltc4151.c @@ -208,7 +208,7 @@ static const struct i2c_device_id ltc4151_id[] = { }; MODULE_DEVICE_TABLE(i2c, ltc4151_id); -static const struct of_device_id ltc4151_match[] = { +static const struct of_device_id __maybe_unused ltc4151_match[] = { { .compatible = "lltc,ltc4151" }, {}, }; From 787afaa30fa51bf9e85b56b237a6ad4a0249b3e8 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 4 Apr 2019 06:21:17 -0700 Subject: [PATCH 033/125] hwmon: (lm90) Fix build warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If CONFIG_OF is not enabled, the following build warning is observed. drivers/hwmon/lm90.c:239:34: warning: ‘lm90_of_match’ defined but not used Mark lm90_of_match as __maybe_unused to fix the problem. Signed-off-by: Guenter Roeck --- drivers/hwmon/lm90.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index 0f9c22b21ffa..b99eda01696e 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -236,7 +236,7 @@ static const struct i2c_device_id lm90_id[] = { }; MODULE_DEVICE_TABLE(i2c, lm90_id); -static const struct of_device_id lm90_of_match[] = { +static const struct of_device_id __maybe_unused lm90_of_match[] = { { .compatible = "adi,adm1032", .data = (void *)adm1032 From 462d7e7ec9e855895a000c17dba0192bf6489718 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 4 Apr 2019 06:23:59 -0700 Subject: [PATCH 034/125] hwmon: (adc128d818) Fix build warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If CONFIG_OF is not enabled, the following build warning is observed. drivers/hwmon/adc128d818.c:524:34: warning: ‘adc128_of_match’ defined but not used Mark adc128_of_match as __maybe_unused to fix the problem. Signed-off-by: Guenter Roeck --- drivers/hwmon/adc128d818.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/adc128d818.c b/drivers/hwmon/adc128d818.c index ca794bf904de..e640be442dae 100644 --- a/drivers/hwmon/adc128d818.c +++ b/drivers/hwmon/adc128d818.c @@ -521,7 +521,7 @@ static const struct i2c_device_id adc128_id[] = { }; MODULE_DEVICE_TABLE(i2c, adc128_id); -static const struct of_device_id adc128_of_match[] = { +static const struct of_device_id __maybe_unused adc128_of_match[] = { { .compatible = "ti,adc128d818" }, { }, }; From 0718298685f5fc643cbdedec06be0ab505da2b8c Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 4 Apr 2019 06:26:08 -0700 Subject: [PATCH 035/125] hwmon: (ad7414) Fix build warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If CONFIG_OF is not enabled, the following build warning is observed. drivers/hwmon/ad7414.c:218:34: warning: ‘ad7414_of_match’ defined but not used Marking ad7414_of_match as __mayybe_unused fixes the problem. Signed-off-by: Guenter Roeck --- drivers/hwmon/ad7414.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/ad7414.c b/drivers/hwmon/ad7414.c index f13806d731fa..b176da8e92a7 100644 --- a/drivers/hwmon/ad7414.c +++ b/drivers/hwmon/ad7414.c @@ -215,7 +215,7 @@ static const struct i2c_device_id ad7414_id[] = { }; MODULE_DEVICE_TABLE(i2c, ad7414_id); -static const struct of_device_id ad7414_of_match[] = { +static const struct of_device_id __maybe_unused ad7414_of_match[] = { { .compatible = "ad,ad7414" }, { }, }; From 07af9a4a6d151821f2697ca7397deb8a6f2bed5e Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 4 Apr 2019 06:27:26 -0700 Subject: [PATCH 036/125] hwmon: (tmp102) Fix build warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If CONFIG_OF is not enabled, the following build warning is observed. drivers/hwmon/tmp102.c:324:34: warning: ‘tmp102_of_match’ defined but not used Mark it as __maybe_unused to fix the problem. Signed-off-by: Guenter Roeck --- drivers/hwmon/tmp102.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/tmp102.c b/drivers/hwmon/tmp102.c index 213564aad005..f4ee55615dea 100644 --- a/drivers/hwmon/tmp102.c +++ b/drivers/hwmon/tmp102.c @@ -303,7 +303,7 @@ static const struct i2c_device_id tmp102_id[] = { }; MODULE_DEVICE_TABLE(i2c, tmp102_id); -static const struct of_device_id tmp102_of_match[] = { +static const struct of_device_id __maybe_unused tmp102_of_match[] = { { .compatible = "ti,tmp102" }, { }, }; From 20894216d8b2217b4367bfe169b620b24cbad22f Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 4 Apr 2019 06:28:34 -0700 Subject: [PATCH 037/125] hwmon: (tmp103) Fix build warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If CONFIG_OF is not enabled, the following build warning is observed. drivers/hwmon/tmp103.c:173:34: warning: ‘tmp103_of_match’ defined but not used Marking tmp103_of_match as __maybe_unused fixes the problem. Signed-off-by: Guenter Roeck --- drivers/hwmon/tmp103.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/tmp103.c b/drivers/hwmon/tmp103.c index bda0fdc1eb53..a91726d33da8 100644 --- a/drivers/hwmon/tmp103.c +++ b/drivers/hwmon/tmp103.c @@ -170,7 +170,7 @@ static const struct i2c_device_id tmp103_id[] = { }; MODULE_DEVICE_TABLE(i2c, tmp103_id); -static const struct of_device_id tmp103_of_match[] = { +static const struct of_device_id __maybe_unused tmp103_of_match[] = { { .compatible = "ti,tmp103" }, { }, }; From eb3cb6d5bd51503f646c8a53bc227f20b23f64a5 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 4 Apr 2019 06:29:51 -0700 Subject: [PATCH 038/125] hwmon: (ads1015) Fix build warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If CONFIG_OF is not enabled, the following build warning is observed. drivers/hwmon/ads1015.c:310:34: warning: ‘ads1015_of_match’ defined but not used Marking ads1015_of_match as __maybe_unused fixes the problem. Signed-off-by: Guenter Roeck --- drivers/hwmon/ads1015.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/ads1015.c b/drivers/hwmon/ads1015.c index c21b0529adb2..412ab7015d75 100644 --- a/drivers/hwmon/ads1015.c +++ b/drivers/hwmon/ads1015.c @@ -307,7 +307,7 @@ static const struct i2c_device_id ads1015_id[] = { }; MODULE_DEVICE_TABLE(i2c, ads1015_id); -static const struct of_device_id ads1015_of_match[] = { +static const struct of_device_id __maybe_unused ads1015_of_match[] = { { .compatible = "ti,ads1015", .data = (void *)ads1015 From fe339dbf295a5da2b316e1f8e762e02fae000f50 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 4 Apr 2019 06:33:42 -0700 Subject: [PATCH 039/125] hwmon: (adt7475) Fix build warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If CONFIG_OF is not enabled, the following build warning is observed. drivers/hwmon/adt7475.c:171:34: warning: ‘adt7475_of_match’ defined but not used Mark adt7475_of_match as __maybe_unused to fix the problem. Signed-off-by: Guenter Roeck --- drivers/hwmon/adt7475.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c index 0dbb8df74e44..7caec127df86 100644 --- a/drivers/hwmon/adt7475.c +++ b/drivers/hwmon/adt7475.c @@ -168,7 +168,7 @@ static const struct i2c_device_id adt7475_id[] = { }; MODULE_DEVICE_TABLE(i2c, adt7475_id); -static const struct of_device_id adt7475_of_match[] = { +static const struct of_device_id __maybe_unused adt7475_of_match[] = { { .compatible = "adi,adt7473", .data = (void *)adt7473 From a62fe340e27184e929b453f6b5097a2f7c9c160c Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 4 Apr 2019 06:35:28 -0700 Subject: [PATCH 040/125] hwmon: (hih6130) Fix build warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If CONFIG_OF is not enabled, the following build warning is observed. drivers/hwmon/hih6130.c:255:34: warning: ‘hih6130_of_match’ defined but not used Mark hih6130_of_match as __maybe_unused to fix the problem. Signed-off-by: Guenter Roeck --- drivers/hwmon/hih6130.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/hih6130.c b/drivers/hwmon/hih6130.c index d167fcfec765..2bf9599b34a1 100644 --- a/drivers/hwmon/hih6130.c +++ b/drivers/hwmon/hih6130.c @@ -252,7 +252,7 @@ static const struct i2c_device_id hih6130_id[] = { }; MODULE_DEVICE_TABLE(i2c, hih6130_id); -static const struct of_device_id hih6130_of_match[] = { +static const struct of_device_id __maybe_unused hih6130_of_match[] = { { .compatible = "honeywell,hih6130", }, { } }; From 0337dd9b4ac6a395efa9635649fa0f1f7094a16a Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 4 Apr 2019 06:36:51 -0700 Subject: [PATCH 041/125] hwmon: (ads7828) Fix build warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If CONFIG_OF is not enabled, the following build warning is observed. drivers/hwmon/ads7828.c:203:34: warning: ‘ads7828_of_match’ defined but not used Mark ads7828_of_match as __maybe_unused to fix the problem. Signed-off-by: Guenter Roeck --- drivers/hwmon/ads7828.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/ads7828.c b/drivers/hwmon/ads7828.c index 12c56d3783ed..e6be617e3fb2 100644 --- a/drivers/hwmon/ads7828.c +++ b/drivers/hwmon/ads7828.c @@ -200,7 +200,7 @@ static const struct i2c_device_id ads7828_device_ids[] = { }; MODULE_DEVICE_TABLE(i2c, ads7828_device_ids); -static const struct of_device_id ads7828_of_match[] = { +static const struct of_device_id __maybe_unused ads7828_of_match[] = { { .compatible = "ti,ads7828", .data = (void *)ads7828 From acb614a393b51c54df52faff5bf69f6f58e396cd Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 4 Apr 2019 06:38:17 -0700 Subject: [PATCH 042/125] hwmon: (w83773g) Fix build warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If CONFIG_OF is not enabled, the following build warning is observed. drivers/hwmon/w83773g.c:47:34: warning: ‘w83773_of_match’ defined but not used Mark w83773_of_match as __maybe_unused to fix the problem. Signed-off-by: Guenter Roeck --- drivers/hwmon/w83773g.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/w83773g.c b/drivers/hwmon/w83773g.c index 1f34d885db52..d4105321e462 100644 --- a/drivers/hwmon/w83773g.c +++ b/drivers/hwmon/w83773g.c @@ -44,7 +44,7 @@ static const struct i2c_device_id w83773_id[] = { MODULE_DEVICE_TABLE(i2c, w83773_id); -static const struct of_device_id w83773_of_match[] = { +static const struct of_device_id __maybe_unused w83773_of_match[] = { { .compatible = "nuvoton,w83773g" }, From ffa83e784745f2c7ead0b9435564a9189eaa592f Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 4 Apr 2019 06:40:00 -0700 Subject: [PATCH 043/125] hwmon: (lm75) Fix build warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If CONFIG_OF is not enabled, the following build warning is observed. drivers/hwmon/lm75.c:446:34: warning: ‘lm75_of_match’ defined but not used Mark lm75_of_match as __maybe_unused to fix the problem. Signed-off-by: Guenter Roeck --- drivers/hwmon/lm75.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c index 3155a04c997e..f307743edc25 100644 --- a/drivers/hwmon/lm75.c +++ b/drivers/hwmon/lm75.c @@ -419,7 +419,7 @@ static const struct i2c_device_id lm75_ids[] = { }; MODULE_DEVICE_TABLE(i2c, lm75_ids); -static const struct of_device_id lm75_of_match[] = { +static const struct of_device_id __maybe_unused lm75_of_match[] = { { .compatible = "adi,adt75", .data = (void *)adt75 From 32c2d40252454e539b91d37776869ed69c23b2e8 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 4 Apr 2019 06:41:19 -0700 Subject: [PATCH 044/125] hwmon: (ina209) Fix build warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If CONFIG_OF is not enabled, the following build warning is observed. drivers/hwmon/ina209.c:590:34: warning: ‘ina209_of_match’ defined but not used Mark ina209_of_match as __maybe_unused to fix the problem. Signed-off-by: Guenter Roeck --- drivers/hwmon/ina209.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/ina209.c b/drivers/hwmon/ina209.c index e3854463db84..6a4ec2f2ddb2 100644 --- a/drivers/hwmon/ina209.c +++ b/drivers/hwmon/ina209.c @@ -587,7 +587,7 @@ static const struct i2c_device_id ina209_id[] = { }; MODULE_DEVICE_TABLE(i2c, ina209_id); -static const struct of_device_id ina209_of_match[] = { +static const struct of_device_id __maybe_unused ina209_of_match[] = { { .compatible = "ti,ina209" }, { }, }; From f198a8697dc5192cd3b02b5f941c8d184fa1337c Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 4 Apr 2019 06:42:50 -0700 Subject: [PATCH 045/125] hwmon: (max6697) Fix build warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If CONFIG_OF is not enabled, the following build warning is observed. drivers/hwmon/max6697.c:653:34: warning: ‘max6697_of_match’ defined but not used Mark max6697_of_match as __maybe_unused to fix the problem. Signed-off-by: Guenter Roeck --- drivers/hwmon/max6697.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/max6697.c b/drivers/hwmon/max6697.c index da43f7ae3de1..328793eaee3c 100644 --- a/drivers/hwmon/max6697.c +++ b/drivers/hwmon/max6697.c @@ -650,7 +650,7 @@ static const struct i2c_device_id max6697_id[] = { }; MODULE_DEVICE_TABLE(i2c, max6697_id); -static const struct of_device_id max6697_of_match[] = { +static const struct of_device_id __maybe_unused max6697_of_match[] = { { .compatible = "maxim,max6581", .data = (void *)max6581 From 2720ce7e46e1c851890ddd9e94c8548230a13280 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 4 Apr 2019 06:44:14 -0700 Subject: [PATCH 046/125] hwmon: (max6650) Fix build warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If CONFIG_OF is not enabled, the following build warning is observed. drivers/hwmon/max6650.c:137:34: warning: ‘max6650_dt_match’ defined but not used Mark max6650_dt_match as __maybe_unused to fix the problem. Signed-off-by: Guenter Roeck --- drivers/hwmon/max6650.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/max6650.c b/drivers/hwmon/max6650.c index 61135a2d0cff..95b234631e55 100644 --- a/drivers/hwmon/max6650.c +++ b/drivers/hwmon/max6650.c @@ -134,7 +134,7 @@ static const u8 tach_reg[] = { MAX6650_REG_TACH3, }; -static const struct of_device_id max6650_dt_match[] = { +static const struct of_device_id __maybe_unused max6650_dt_match[] = { { .compatible = "maxim,max6650", .data = (void *)1 From 20b497ab9c38e89e3a0aeaf469c90682520fb095 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 4 Apr 2019 07:44:40 -0700 Subject: [PATCH 047/125] hwmon: (lm85) Fix build warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The following build warning is seen if CONFIG_OF is disabled. drivers/hwmon/lm85.c:1645:34: warning: ‘lm85_of_match’ defined but not used Mark lm85_of_match as __maybe_unused to ix the problem. Signed-off-by: Guenter Roeck --- drivers/hwmon/lm85.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index a95d48316f06..235bba054d47 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -1642,7 +1642,7 @@ static const struct i2c_device_id lm85_id[] = { }; MODULE_DEVICE_TABLE(i2c, lm85_id); -static const struct of_device_id lm85_of_match[] = { +static const struct of_device_id __maybe_unused lm85_of_match[] = { { .compatible = "adi,adm1027", .data = (void *)adm1027 From 969c45b98b1d862148cd8c5244077a99b0b0eec5 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 4 Apr 2019 07:47:04 -0700 Subject: [PATCH 048/125] hwmon: (max6621) Fix build warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The following build warning is seen if CONFIG_OF is disabled. drivers/hwmon/max6621.c:573:34: warning: ‘max6621_of_match’ defined but not used Mark max6621_of_match as __maybe_unused to fix the problem. Signed-off-by: Guenter Roeck --- drivers/hwmon/max6621.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/max6621.c b/drivers/hwmon/max6621.c index 0c399e407de3..1810a753f1a3 100644 --- a/drivers/hwmon/max6621.c +++ b/drivers/hwmon/max6621.c @@ -552,7 +552,7 @@ static const struct i2c_device_id max6621_id[] = { }; MODULE_DEVICE_TABLE(i2c, max6621_id); -static const struct of_device_id max6621_of_match[] = { +static const struct of_device_id __maybe_unused max6621_of_match[] = { { .compatible = "maxim,max6621" }, { } }; From 1cbee124dfd4d4388226d995a9c709a50b28f797 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 4 Apr 2019 07:48:55 -0700 Subject: [PATCH 049/125] hwmon: (stts751) Fix build warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The following build warning is seen if CONFIG_OF is disabled. drivers/hwmon/stts751.c:88:34: warning: ‘stts751_of_match’ defined but not used Mark stts751_of_match as __maybe_unused to fix the problem. Signed-off-by: Guenter Roeck --- drivers/hwmon/stts751.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/stts751.c b/drivers/hwmon/stts751.c index 90b60297f2f7..f670796b609a 100644 --- a/drivers/hwmon/stts751.c +++ b/drivers/hwmon/stts751.c @@ -85,7 +85,7 @@ static const struct i2c_device_id stts751_id[] = { { } }; -static const struct of_device_id stts751_of_match[] = { +static const struct of_device_id __maybe_unused stts751_of_match[] = { { .compatible = "stts751" }, { }, }; From bd7d56a709004b35ce17854d44b96466cc334613 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 4 Apr 2019 07:50:26 -0700 Subject: [PATCH 050/125] hwmon: (tmp421) Fix build warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The following build warning is seen if CONFIG_OF is disabled. drivers/hwmon/tmp421.c:73:34: warning: ‘tmp421_of_match’ defined but not used Mark tmp421_of_match as __maybe_unused to fix the problem. Signed-off-by: Guenter Roeck --- drivers/hwmon/tmp421.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/tmp421.c b/drivers/hwmon/tmp421.c index 2732a71f3b39..5e63010dd3a0 100644 --- a/drivers/hwmon/tmp421.c +++ b/drivers/hwmon/tmp421.c @@ -70,7 +70,7 @@ static const struct i2c_device_id tmp421_id[] = { }; MODULE_DEVICE_TABLE(i2c, tmp421_id); -static const struct of_device_id tmp421_of_match[] = { +static const struct of_device_id __maybe_unused tmp421_of_match[] = { { .compatible = "ti,tmp421", .data = (void *)2 From 0e09e9f939cb1f16391d5f86c9d39f19c23923a5 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 4 Apr 2019 07:52:05 -0700 Subject: [PATCH 051/125] hwmon: lm95245: Fix build warnings MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The following build warning is seen if CONFIG_OF is disabled. drivers/hwmon/lm95245.c:626:34: warning: ‘lm95245_of_match’ defined but not used Mark lm95245_of_match as __maybe_unused to fix the problem. The following build warning is always seen. drivers/hwmon/lm95245.c:95:17: warning: ‘lm95245_reg_address’ defined but not used The array is no longer used since commit c0a4b9ec1b43 ("hwmon: (lm95245) Use new hwmon registration API"). Remove it. Signed-off-by: Guenter Roeck --- drivers/hwmon/lm95245.c | 15 +-------------- 1 file changed, 1 insertion(+), 14 deletions(-) diff --git a/drivers/hwmon/lm95245.c b/drivers/hwmon/lm95245.c index c7e04f28ac90..8d08ca8bbdf8 100644 --- a/drivers/hwmon/lm95245.c +++ b/drivers/hwmon/lm95245.c @@ -92,19 +92,6 @@ static const unsigned short normal_i2c[] = { #define LM95235_REVISION 0xB1 #define LM95245_REVISION 0xB3 -static const u8 lm95245_reg_address[] = { - LM95245_REG_R_LOCAL_TEMPH_S, - LM95245_REG_R_LOCAL_TEMPL_S, - LM95245_REG_R_REMOTE_TEMPH_S, - LM95245_REG_R_REMOTE_TEMPL_S, - LM95245_REG_R_REMOTE_TEMPH_U, - LM95245_REG_R_REMOTE_TEMPL_U, - LM95245_REG_RW_LOCAL_OS_TCRIT_LIMIT, - LM95245_REG_RW_REMOTE_TCRIT_LIMIT, - LM95245_REG_RW_COMMON_HYSTERESIS, - LM95245_REG_R_STATUS1, -}; - /* Client data (each client gets its own) */ struct lm95245_data { struct regmap *regmap; @@ -607,7 +594,7 @@ static const struct i2c_device_id lm95245_id[] = { }; MODULE_DEVICE_TABLE(i2c, lm95245_id); -static const struct of_device_id lm95245_of_match[] = { +static const struct of_device_id __maybe_unused lm95245_of_match[] = { { .compatible = "national,lm95235" }, { .compatible = "national,lm95245" }, { }, From 8c71c7b943d4c12994e4e3eb2d50dfb3681e0c8d Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 4 Apr 2019 07:59:01 -0700 Subject: [PATCH 052/125] hwmon: (lm63) Fix build warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The following build warning is seen if CONFIG_OF is disabled. drivers/hwmon/lm63.c:1156:34: warning: ‘lm63_of_match’ defined but not used Mark lm63_of_match as __maybe_unused to fix the problem. Signed-off-by: Guenter Roeck --- drivers/hwmon/lm63.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c index eac54b9cdeec..8848fbe5fd16 100644 --- a/drivers/hwmon/lm63.c +++ b/drivers/hwmon/lm63.c @@ -1153,7 +1153,7 @@ static const struct i2c_device_id lm63_id[] = { }; MODULE_DEVICE_TABLE(i2c, lm63_id); -static const struct of_device_id lm63_of_match[] = { +static const struct of_device_id __maybe_unused lm63_of_match[] = { { .compatible = "national,lm63", .data = (void *)lm63 From df6b8c70c2109d2221592954aacd67a2ad2f696e Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 4 Apr 2019 08:00:57 -0700 Subject: [PATCH 053/125] hwmon: (ina2xx) Fix build warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The following build warning is seen if CONFIG_OF is disabled. drivers/hwmon/ina2xx.c:510:34: warning: ‘ina2xx_of_match’ defined but not used Mark ina2xx_of_match as __maybe_unused to fix the problem. Signed-off-by: Guenter Roeck --- drivers/hwmon/ina2xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c index 290379c49be9..42df51f8cdf2 100644 --- a/drivers/hwmon/ina2xx.c +++ b/drivers/hwmon/ina2xx.c @@ -507,7 +507,7 @@ static const struct i2c_device_id ina2xx_id[] = { }; MODULE_DEVICE_TABLE(i2c, ina2xx_id); -static const struct of_device_id ina2xx_of_match[] = { +static const struct of_device_id __maybe_unused ina2xx_of_match[] = { { .compatible = "ti,ina219", .data = (void *)ina219 From 73e6ff71a7ea924fb7121d576a2d41e3be3fc6b5 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 4 Apr 2019 10:52:43 -0700 Subject: [PATCH 054/125] hwmon: (f71805f) Use request_muxed_region for Super-IO accesses Super-IO accesses may fail on a system with no or unmapped LPC bus. Unable to handle kernel paging request at virtual address ffffffbffee0002e pgd = ffffffc1d68d4000 [ffffffbffee0002e] *pgd=0000000000000000, *pud=0000000000000000 Internal error: Oops: 94000046 [#1] PREEMPT SMP Modules linked in: f71805f(+) hwmon CPU: 3 PID: 1659 Comm: insmod Not tainted 4.5.0+ #88 Hardware name: linux,dummy-virt (DT) task: ffffffc1f6665400 ti: ffffffc1d6418000 task.ti: ffffffc1d6418000 PC is at f71805f_find+0x6c/0x358 [f71805f] Also, other drivers may attempt to access the LPC bus at the same time, resulting in undefined behavior. Use request_muxed_region() to ensure that IO access on the requested address space is supported, and to ensure that access by multiple drivers is synchronized. Fixes: e53004e20a58e ("hwmon: New f71805f driver") Reported-by: Kefeng Wang Reported-by: John Garry Cc: John Garry Acked-by: John Garry Signed-off-by: Guenter Roeck --- drivers/hwmon/f71805f.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/hwmon/f71805f.c b/drivers/hwmon/f71805f.c index 73c681162653..623736d2a7c1 100644 --- a/drivers/hwmon/f71805f.c +++ b/drivers/hwmon/f71805f.c @@ -96,17 +96,23 @@ superio_select(int base, int ld) outb(ld, base + 1); } -static inline void +static inline int superio_enter(int base) { + if (!request_muxed_region(base, 2, DRVNAME)) + return -EBUSY; + outb(0x87, base); outb(0x87, base); + + return 0; } static inline void superio_exit(int base) { outb(0xaa, base); + release_region(base, 2); } /* @@ -1561,7 +1567,7 @@ exit: static int __init f71805f_find(int sioaddr, unsigned short *address, struct f71805f_sio_data *sio_data) { - int err = -ENODEV; + int err; u16 devid; static const char * const names[] = { @@ -1569,8 +1575,11 @@ static int __init f71805f_find(int sioaddr, unsigned short *address, "F71872F/FG or F71806F/FG", }; - superio_enter(sioaddr); + err = superio_enter(sioaddr); + if (err) + return err; + err = -ENODEV; devid = superio_inw(sioaddr, SIO_REG_MANID); if (devid != SIO_FINTEK_ID) goto exit; From 755a9b0f8aaa5639ba5671ca50080852babb89ce Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 4 Apr 2019 11:16:20 -0700 Subject: [PATCH 055/125] hwmon: (pc87427) Use request_muxed_region for Super-IO accesses Super-IO accesses may fail on a system with no or unmapped LPC bus. Also, other drivers may attempt to access the LPC bus at the same time, resulting in undefined behavior. Use request_muxed_region() to ensure that IO access on the requested address space is supported, and to ensure that access by multiple drivers is synchronized. Fixes: ba224e2c4f0a7 ("hwmon: New PC87427 hardware monitoring driver") Reported-by: Kefeng Wang Reported-by: John Garry Cc: John Garry Acked-by: John Garry Signed-off-by: Guenter Roeck --- drivers/hwmon/pc87427.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/hwmon/pc87427.c b/drivers/hwmon/pc87427.c index d1a3f2040c00..58eee8fa3e6d 100644 --- a/drivers/hwmon/pc87427.c +++ b/drivers/hwmon/pc87427.c @@ -106,6 +106,13 @@ static const char *logdev_str[2] = { DRVNAME " FMC", DRVNAME " HMC" }; #define LD_IN 1 #define LD_TEMP 1 +static inline int superio_enter(int sioaddr) +{ + if (!request_muxed_region(sioaddr, 2, DRVNAME)) + return -EBUSY; + return 0; +} + static inline void superio_outb(int sioaddr, int reg, int val) { outb(reg, sioaddr); @@ -122,6 +129,7 @@ static inline void superio_exit(int sioaddr) { outb(0x02, sioaddr); outb(0x02, sioaddr + 1); + release_region(sioaddr, 2); } /* @@ -1195,7 +1203,11 @@ static int __init pc87427_find(int sioaddr, struct pc87427_sio_data *sio_data) { u16 val; u8 cfg, cfg_b; - int i, err = 0; + int i, err; + + err = superio_enter(sioaddr); + if (err) + return err; /* Identify device */ val = force_id ? force_id : superio_inb(sioaddr, SIOREG_DEVID); From 8c0826756744c0ac1df600a5e4cca1a341b13101 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 4 Apr 2019 11:22:42 -0700 Subject: [PATCH 056/125] hwmon: (smsc47b397) Use request_muxed_region for Super-IO accesses Super-IO accesses may fail on a system with no or unmapped LPC bus. Also, other drivers may attempt to access the LPC bus at the same time, resulting in undefined behavior. Use request_muxed_region() to ensure that IO access on the requested address space is supported, and to ensure that access by multiple drivers is synchronized. Fixes: 8d5d45fb1468 ("I2C: Move hwmon drivers (2/3)") Reported-by: Kefeng Wang Reported-by: John Garry Cc: John Garry Acked-by: John Garry Signed-off-by: Guenter Roeck --- drivers/hwmon/smsc47b397.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/smsc47b397.c b/drivers/hwmon/smsc47b397.c index c0775084dde0..60e193f2e970 100644 --- a/drivers/hwmon/smsc47b397.c +++ b/drivers/hwmon/smsc47b397.c @@ -72,14 +72,19 @@ static inline void superio_select(int ld) superio_outb(0x07, ld); } -static inline void superio_enter(void) +static inline int superio_enter(void) { + if (!request_muxed_region(REG, 2, DRVNAME)) + return -EBUSY; + outb(0x55, REG); + return 0; } static inline void superio_exit(void) { outb(0xAA, REG); + release_region(REG, 2); } #define SUPERIO_REG_DEVID 0x20 @@ -300,8 +305,12 @@ static int __init smsc47b397_find(void) u8 id, rev; char *name; unsigned short addr; + int err; + + err = superio_enter(); + if (err) + return err; - superio_enter(); id = force_id ? force_id : superio_inb(SUPERIO_REG_DEVID); switch (id) { From 66efcd2b6a0df124a14956b3cafce707974ccd64 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 21 Jan 2019 18:33:47 -0800 Subject: [PATCH 057/125] hwmon: (adm1025) Use permission specific SENSOR[_DEVICE]_ATTR variants Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code, to improve readbility, and to reduce the chance of inconsistencies. Also replace any remaining S_ in the driver with octal values. The conversion was done automatically with coccinelle. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches/. This patch does not introduce functional changes. It was verified by compiling the old and new files and comparing text and data sizes. Signed-off-by: Guenter Roeck --- drivers/hwmon/adm1025.c | 96 +++++++++++++++++++++-------------------- 1 file changed, 50 insertions(+), 46 deletions(-) diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c index 1e4dad36f5ef..ec437cc9e739 100644 --- a/drivers/hwmon/adm1025.c +++ b/drivers/hwmon/adm1025.c @@ -174,7 +174,7 @@ static struct adm1025_data *adm1025_update_device(struct device *dev) */ static ssize_t -show_in(struct device *dev, struct device_attribute *attr, char *buf) +in_show(struct device *dev, struct device_attribute *attr, char *buf) { int index = to_sensor_dev_attr(attr)->index; struct adm1025_data *data = adm1025_update_device(dev); @@ -183,7 +183,7 @@ show_in(struct device *dev, struct device_attribute *attr, char *buf) } static ssize_t -show_in_min(struct device *dev, struct device_attribute *attr, char *buf) +in_min_show(struct device *dev, struct device_attribute *attr, char *buf) { int index = to_sensor_dev_attr(attr)->index; struct adm1025_data *data = adm1025_update_device(dev); @@ -192,7 +192,7 @@ show_in_min(struct device *dev, struct device_attribute *attr, char *buf) } static ssize_t -show_in_max(struct device *dev, struct device_attribute *attr, char *buf) +in_max_show(struct device *dev, struct device_attribute *attr, char *buf) { int index = to_sensor_dev_attr(attr)->index; struct adm1025_data *data = adm1025_update_device(dev); @@ -201,7 +201,7 @@ show_in_max(struct device *dev, struct device_attribute *attr, char *buf) } static ssize_t -show_temp(struct device *dev, struct device_attribute *attr, char *buf) +temp_show(struct device *dev, struct device_attribute *attr, char *buf) { int index = to_sensor_dev_attr(attr)->index; struct adm1025_data *data = adm1025_update_device(dev); @@ -209,7 +209,7 @@ show_temp(struct device *dev, struct device_attribute *attr, char *buf) } static ssize_t -show_temp_min(struct device *dev, struct device_attribute *attr, char *buf) +temp_min_show(struct device *dev, struct device_attribute *attr, char *buf) { int index = to_sensor_dev_attr(attr)->index; struct adm1025_data *data = adm1025_update_device(dev); @@ -217,15 +217,15 @@ show_temp_min(struct device *dev, struct device_attribute *attr, char *buf) } static ssize_t -show_temp_max(struct device *dev, struct device_attribute *attr, char *buf) +temp_max_show(struct device *dev, struct device_attribute *attr, char *buf) { int index = to_sensor_dev_attr(attr)->index; struct adm1025_data *data = adm1025_update_device(dev); return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[index])); } -static ssize_t set_in_min(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t in_min_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { int index = to_sensor_dev_attr(attr)->index; struct adm1025_data *data = dev_get_drvdata(dev); @@ -245,8 +245,8 @@ static ssize_t set_in_min(struct device *dev, struct device_attribute *attr, return count; } -static ssize_t set_in_max(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t in_max_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { int index = to_sensor_dev_attr(attr)->index; struct adm1025_data *data = dev_get_drvdata(dev); @@ -266,22 +266,28 @@ static ssize_t set_in_max(struct device *dev, struct device_attribute *attr, return count; } -#define set_in(offset) \ -static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \ - show_in, NULL, offset); \ -static SENSOR_DEVICE_ATTR(in##offset##_min, S_IWUSR | S_IRUGO, \ - show_in_min, set_in_min, offset); \ -static SENSOR_DEVICE_ATTR(in##offset##_max, S_IWUSR | S_IRUGO, \ - show_in_max, set_in_max, offset) -set_in(0); -set_in(1); -set_in(2); -set_in(3); -set_in(4); -set_in(5); +static SENSOR_DEVICE_ATTR_RO(in0_input, in, 0); +static SENSOR_DEVICE_ATTR_RW(in0_min, in_min, 0); +static SENSOR_DEVICE_ATTR_RW(in0_max, in_max, 0); +static SENSOR_DEVICE_ATTR_RO(in1_input, in, 1); +static SENSOR_DEVICE_ATTR_RW(in1_min, in_min, 1); +static SENSOR_DEVICE_ATTR_RW(in1_max, in_max, 1); +static SENSOR_DEVICE_ATTR_RO(in2_input, in, 2); +static SENSOR_DEVICE_ATTR_RW(in2_min, in_min, 2); +static SENSOR_DEVICE_ATTR_RW(in2_max, in_max, 2); +static SENSOR_DEVICE_ATTR_RO(in3_input, in, 3); +static SENSOR_DEVICE_ATTR_RW(in3_min, in_min, 3); +static SENSOR_DEVICE_ATTR_RW(in3_max, in_max, 3); +static SENSOR_DEVICE_ATTR_RO(in4_input, in, 4); +static SENSOR_DEVICE_ATTR_RW(in4_min, in_min, 4); +static SENSOR_DEVICE_ATTR_RW(in4_max, in_max, 4); +static SENSOR_DEVICE_ATTR_RO(in5_input, in, 5); +static SENSOR_DEVICE_ATTR_RW(in5_min, in_min, 5); +static SENSOR_DEVICE_ATTR_RW(in5_max, in_max, 5); -static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t temp_min_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) { int index = to_sensor_dev_attr(attr)->index; struct adm1025_data *data = dev_get_drvdata(dev); @@ -301,8 +307,9 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, return count; } -static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t temp_max_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) { int index = to_sensor_dev_attr(attr)->index; struct adm1025_data *data = dev_get_drvdata(dev); @@ -322,15 +329,12 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, return count; } -#define set_temp(offset) \ -static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \ - show_temp, NULL, offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \ - show_temp_min, set_temp_min, offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IWUSR | S_IRUGO, \ - show_temp_max, set_temp_max, offset - 1) -set_temp(1); -set_temp(2); +static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, 0); +static SENSOR_DEVICE_ATTR_RW(temp1_min, temp_min, 0); +static SENSOR_DEVICE_ATTR_RW(temp1_max, temp_max, 0); +static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, 1); +static SENSOR_DEVICE_ATTR_RW(temp2_min, temp_min, 1); +static SENSOR_DEVICE_ATTR_RW(temp2_max, temp_max, 1); static ssize_t alarms_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -341,21 +345,21 @@ alarms_show(struct device *dev, struct device_attribute *attr, char *buf) static DEVICE_ATTR_RO(alarms); static ssize_t -show_alarm(struct device *dev, struct device_attribute *attr, char *buf) +alarm_show(struct device *dev, struct device_attribute *attr, char *buf) { int bitnr = to_sensor_dev_attr(attr)->index; struct adm1025_data *data = adm1025_update_device(dev); return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1); } -static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0); -static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1); -static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2); -static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3); -static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8); -static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 9); -static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 5); -static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 4); -static SENSOR_DEVICE_ATTR(temp1_fault, S_IRUGO, show_alarm, NULL, 14); +static SENSOR_DEVICE_ATTR_RO(in0_alarm, alarm, 0); +static SENSOR_DEVICE_ATTR_RO(in1_alarm, alarm, 1); +static SENSOR_DEVICE_ATTR_RO(in2_alarm, alarm, 2); +static SENSOR_DEVICE_ATTR_RO(in3_alarm, alarm, 3); +static SENSOR_DEVICE_ATTR_RO(in4_alarm, alarm, 8); +static SENSOR_DEVICE_ATTR_RO(in5_alarm, alarm, 9); +static SENSOR_DEVICE_ATTR_RO(temp1_alarm, alarm, 5); +static SENSOR_DEVICE_ATTR_RO(temp2_alarm, alarm, 4); +static SENSOR_DEVICE_ATTR_RO(temp1_fault, alarm, 14); static ssize_t cpu0_vid_show(struct device *dev, struct device_attribute *attr, char *buf) From 7ded2315ffe2b56628b199df4d14e7ae0535cf8f Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 21 Jan 2019 18:34:27 -0800 Subject: [PATCH 058/125] hwmon: (adm1026) Use permission specific SENSOR[_DEVICE]_ATTR variants Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code, to improve readbility, and to reduce the chance of inconsistencies. Also replace any remaining S_ in the driver with octal values. The conversion was done automatically with coccinelle. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches/. This patch does not introduce functional changes. It was verified by compiling the old and new files and comparing text and data sizes. Signed-off-by: Guenter Roeck --- drivers/hwmon/adm1026.c | 412 +++++++++++++++++++++------------------- 1 file changed, 214 insertions(+), 198 deletions(-) diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c index e43f09a07cd0..d34a68a11036 100644 --- a/drivers/hwmon/adm1026.c +++ b/drivers/hwmon/adm1026.c @@ -477,24 +477,24 @@ static struct adm1026_data *adm1026_update_device(struct device *dev) return data; } -static ssize_t show_in(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t in_show(struct device *dev, struct device_attribute *attr, + char *buf) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; struct adm1026_data *data = adm1026_update_device(dev); return sprintf(buf, "%d\n", INS_FROM_REG(nr, data->in[nr])); } -static ssize_t show_in_min(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t in_min_show(struct device *dev, struct device_attribute *attr, + char *buf) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; struct adm1026_data *data = adm1026_update_device(dev); return sprintf(buf, "%d\n", INS_FROM_REG(nr, data->in_min[nr])); } -static ssize_t set_in_min(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t in_min_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -513,16 +513,16 @@ static ssize_t set_in_min(struct device *dev, struct device_attribute *attr, mutex_unlock(&data->update_lock); return count; } -static ssize_t show_in_max(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t in_max_show(struct device *dev, struct device_attribute *attr, + char *buf) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; struct adm1026_data *data = adm1026_update_device(dev); return sprintf(buf, "%d\n", INS_FROM_REG(nr, data->in_max[nr])); } -static ssize_t set_in_max(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t in_max_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -542,48 +542,72 @@ static ssize_t set_in_max(struct device *dev, struct device_attribute *attr, return count; } -#define in_reg(offset) \ -static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in, \ - NULL, offset); \ -static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ - show_in_min, set_in_min, offset); \ -static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ - show_in_max, set_in_max, offset); +static SENSOR_DEVICE_ATTR_RO(in0_input, in, 0); +static SENSOR_DEVICE_ATTR_RW(in0_min, in_min, 0); +static SENSOR_DEVICE_ATTR_RW(in0_max, in_max, 0); +static SENSOR_DEVICE_ATTR_RO(in1_input, in, 1); +static SENSOR_DEVICE_ATTR_RW(in1_min, in_min, 1); +static SENSOR_DEVICE_ATTR_RW(in1_max, in_max, 1); +static SENSOR_DEVICE_ATTR_RO(in2_input, in, 2); +static SENSOR_DEVICE_ATTR_RW(in2_min, in_min, 2); +static SENSOR_DEVICE_ATTR_RW(in2_max, in_max, 2); +static SENSOR_DEVICE_ATTR_RO(in3_input, in, 3); +static SENSOR_DEVICE_ATTR_RW(in3_min, in_min, 3); +static SENSOR_DEVICE_ATTR_RW(in3_max, in_max, 3); +static SENSOR_DEVICE_ATTR_RO(in4_input, in, 4); +static SENSOR_DEVICE_ATTR_RW(in4_min, in_min, 4); +static SENSOR_DEVICE_ATTR_RW(in4_max, in_max, 4); +static SENSOR_DEVICE_ATTR_RO(in5_input, in, 5); +static SENSOR_DEVICE_ATTR_RW(in5_min, in_min, 5); +static SENSOR_DEVICE_ATTR_RW(in5_max, in_max, 5); +static SENSOR_DEVICE_ATTR_RO(in6_input, in, 6); +static SENSOR_DEVICE_ATTR_RW(in6_min, in_min, 6); +static SENSOR_DEVICE_ATTR_RW(in6_max, in_max, 6); +static SENSOR_DEVICE_ATTR_RO(in7_input, in, 7); +static SENSOR_DEVICE_ATTR_RW(in7_min, in_min, 7); +static SENSOR_DEVICE_ATTR_RW(in7_max, in_max, 7); +static SENSOR_DEVICE_ATTR_RO(in8_input, in, 8); +static SENSOR_DEVICE_ATTR_RW(in8_min, in_min, 8); +static SENSOR_DEVICE_ATTR_RW(in8_max, in_max, 8); +static SENSOR_DEVICE_ATTR_RO(in9_input, in, 9); +static SENSOR_DEVICE_ATTR_RW(in9_min, in_min, 9); +static SENSOR_DEVICE_ATTR_RW(in9_max, in_max, 9); +static SENSOR_DEVICE_ATTR_RO(in10_input, in, 10); +static SENSOR_DEVICE_ATTR_RW(in10_min, in_min, 10); +static SENSOR_DEVICE_ATTR_RW(in10_max, in_max, 10); +static SENSOR_DEVICE_ATTR_RO(in11_input, in, 11); +static SENSOR_DEVICE_ATTR_RW(in11_min, in_min, 11); +static SENSOR_DEVICE_ATTR_RW(in11_max, in_max, 11); +static SENSOR_DEVICE_ATTR_RO(in12_input, in, 12); +static SENSOR_DEVICE_ATTR_RW(in12_min, in_min, 12); +static SENSOR_DEVICE_ATTR_RW(in12_max, in_max, 12); +static SENSOR_DEVICE_ATTR_RO(in13_input, in, 13); +static SENSOR_DEVICE_ATTR_RW(in13_min, in_min, 13); +static SENSOR_DEVICE_ATTR_RW(in13_max, in_max, 13); +static SENSOR_DEVICE_ATTR_RO(in14_input, in, 14); +static SENSOR_DEVICE_ATTR_RW(in14_min, in_min, 14); +static SENSOR_DEVICE_ATTR_RW(in14_max, in_max, 14); +static SENSOR_DEVICE_ATTR_RO(in15_input, in, 15); +static SENSOR_DEVICE_ATTR_RW(in15_min, in_min, 15); +static SENSOR_DEVICE_ATTR_RW(in15_max, in_max, 15); - -in_reg(0); -in_reg(1); -in_reg(2); -in_reg(3); -in_reg(4); -in_reg(5); -in_reg(6); -in_reg(7); -in_reg(8); -in_reg(9); -in_reg(10); -in_reg(11); -in_reg(12); -in_reg(13); -in_reg(14); -in_reg(15); - -static ssize_t show_in16(struct device *dev, struct device_attribute *attr, +static ssize_t in16_show(struct device *dev, struct device_attribute *attr, char *buf) { struct adm1026_data *data = adm1026_update_device(dev); return sprintf(buf, "%d\n", INS_FROM_REG(16, data->in[16]) - NEG12_OFFSET); } -static ssize_t show_in16_min(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t in16_min_show(struct device *dev, + struct device_attribute *attr, char *buf) { struct adm1026_data *data = adm1026_update_device(dev); return sprintf(buf, "%d\n", INS_FROM_REG(16, data->in_min[16]) - NEG12_OFFSET); } -static ssize_t set_in16_min(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t in16_min_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) { struct adm1026_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; @@ -603,15 +627,16 @@ static ssize_t set_in16_min(struct device *dev, struct device_attribute *attr, mutex_unlock(&data->update_lock); return count; } -static ssize_t show_in16_max(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t in16_max_show(struct device *dev, + struct device_attribute *attr, char *buf) { struct adm1026_data *data = adm1026_update_device(dev); return sprintf(buf, "%d\n", INS_FROM_REG(16, data->in_max[16]) - NEG12_OFFSET); } -static ssize_t set_in16_max(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t in16_max_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) { struct adm1026_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; @@ -632,17 +657,14 @@ static ssize_t set_in16_max(struct device *dev, struct device_attribute *attr, return count; } -static SENSOR_DEVICE_ATTR(in16_input, S_IRUGO, show_in16, NULL, 16); -static SENSOR_DEVICE_ATTR(in16_min, S_IRUGO | S_IWUSR, show_in16_min, - set_in16_min, 16); -static SENSOR_DEVICE_ATTR(in16_max, S_IRUGO | S_IWUSR, show_in16_max, - set_in16_max, 16); - +static SENSOR_DEVICE_ATTR_RO(in16_input, in16, 16); +static SENSOR_DEVICE_ATTR_RW(in16_min, in16_min, 16); +static SENSOR_DEVICE_ATTR_RW(in16_max, in16_max, 16); /* Now add fan read/write functions */ -static ssize_t show_fan(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t fan_show(struct device *dev, struct device_attribute *attr, + char *buf) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -650,8 +672,8 @@ static ssize_t show_fan(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr], data->fan_div[nr])); } -static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t fan_min_show(struct device *dev, struct device_attribute *attr, + char *buf) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -659,8 +681,9 @@ static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr], data->fan_div[nr])); } -static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t fan_min_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -681,20 +704,22 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr, return count; } -#define fan_offset(offset) \ -static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan, NULL, \ - offset - 1); \ -static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ - show_fan_min, set_fan_min, offset - 1); - -fan_offset(1); -fan_offset(2); -fan_offset(3); -fan_offset(4); -fan_offset(5); -fan_offset(6); -fan_offset(7); -fan_offset(8); +static SENSOR_DEVICE_ATTR_RO(fan1_input, fan, 0); +static SENSOR_DEVICE_ATTR_RW(fan1_min, fan_min, 0); +static SENSOR_DEVICE_ATTR_RO(fan2_input, fan, 1); +static SENSOR_DEVICE_ATTR_RW(fan2_min, fan_min, 1); +static SENSOR_DEVICE_ATTR_RO(fan3_input, fan, 2); +static SENSOR_DEVICE_ATTR_RW(fan3_min, fan_min, 2); +static SENSOR_DEVICE_ATTR_RO(fan4_input, fan, 3); +static SENSOR_DEVICE_ATTR_RW(fan4_min, fan_min, 3); +static SENSOR_DEVICE_ATTR_RO(fan5_input, fan, 4); +static SENSOR_DEVICE_ATTR_RW(fan5_min, fan_min, 4); +static SENSOR_DEVICE_ATTR_RO(fan6_input, fan, 5); +static SENSOR_DEVICE_ATTR_RW(fan6_min, fan_min, 5); +static SENSOR_DEVICE_ATTR_RO(fan7_input, fan, 6); +static SENSOR_DEVICE_ATTR_RW(fan7_min, fan_min, 6); +static SENSOR_DEVICE_ATTR_RO(fan8_input, fan, 7); +static SENSOR_DEVICE_ATTR_RW(fan8_min, fan_min, 7); /* Adjust fan_min to account for new fan divisor */ static void fixup_fan_min(struct device *dev, int fan, int old_div) @@ -715,16 +740,17 @@ static void fixup_fan_min(struct device *dev, int fan, int old_div) } /* Now add fan_div read/write functions */ -static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t fan_div_show(struct device *dev, struct device_attribute *attr, + char *buf) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; struct adm1026_data *data = adm1026_update_device(dev); return sprintf(buf, "%d\n", data->fan_div[nr]); } -static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t fan_div_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -765,38 +791,35 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr, return count; } -#define fan_offset_div(offset) \ -static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \ - show_fan_div, set_fan_div, offset - 1); - -fan_offset_div(1); -fan_offset_div(2); -fan_offset_div(3); -fan_offset_div(4); -fan_offset_div(5); -fan_offset_div(6); -fan_offset_div(7); -fan_offset_div(8); +static SENSOR_DEVICE_ATTR_RW(fan1_div, fan_div, 0); +static SENSOR_DEVICE_ATTR_RW(fan2_div, fan_div, 1); +static SENSOR_DEVICE_ATTR_RW(fan3_div, fan_div, 2); +static SENSOR_DEVICE_ATTR_RW(fan4_div, fan_div, 3); +static SENSOR_DEVICE_ATTR_RW(fan5_div, fan_div, 4); +static SENSOR_DEVICE_ATTR_RW(fan6_div, fan_div, 5); +static SENSOR_DEVICE_ATTR_RW(fan7_div, fan_div, 6); +static SENSOR_DEVICE_ATTR_RW(fan8_div, fan_div, 7); /* Temps */ -static ssize_t show_temp(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t temp_show(struct device *dev, struct device_attribute *attr, + char *buf) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; struct adm1026_data *data = adm1026_update_device(dev); return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr])); } -static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t temp_min_show(struct device *dev, + struct device_attribute *attr, char *buf) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; struct adm1026_data *data = adm1026_update_device(dev); return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[nr])); } -static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t temp_min_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -816,16 +839,17 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, mutex_unlock(&data->update_lock); return count; } -static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t temp_max_show(struct device *dev, + struct device_attribute *attr, char *buf) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; struct adm1026_data *data = adm1026_update_device(dev); return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[nr])); } -static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t temp_max_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -846,30 +870,27 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, return count; } -#define temp_reg(offset) \ -static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp, \ - NULL, offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \ - show_temp_min, set_temp_min, offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \ - show_temp_max, set_temp_max, offset - 1); +static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, 0); +static SENSOR_DEVICE_ATTR_RW(temp1_min, temp_min, 0); +static SENSOR_DEVICE_ATTR_RW(temp1_max, temp_max, 0); +static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, 1); +static SENSOR_DEVICE_ATTR_RW(temp2_min, temp_min, 1); +static SENSOR_DEVICE_ATTR_RW(temp2_max, temp_max, 1); +static SENSOR_DEVICE_ATTR_RO(temp3_input, temp, 2); +static SENSOR_DEVICE_ATTR_RW(temp3_min, temp_min, 2); +static SENSOR_DEVICE_ATTR_RW(temp3_max, temp_max, 2); - -temp_reg(1); -temp_reg(2); -temp_reg(3); - -static ssize_t show_temp_offset(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t temp_offset_show(struct device *dev, + struct device_attribute *attr, char *buf) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; struct adm1026_data *data = adm1026_update_device(dev); return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_offset[nr])); } -static ssize_t set_temp_offset(struct device *dev, - struct device_attribute *attr, const char *buf, - size_t count) +static ssize_t temp_offset_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -890,16 +911,13 @@ static ssize_t set_temp_offset(struct device *dev, return count; } -#define temp_offset_reg(offset) \ -static SENSOR_DEVICE_ATTR(temp##offset##_offset, S_IRUGO | S_IWUSR, \ - show_temp_offset, set_temp_offset, offset - 1); +static SENSOR_DEVICE_ATTR_RW(temp1_offset, temp_offset, 0); +static SENSOR_DEVICE_ATTR_RW(temp2_offset, temp_offset, 1); +static SENSOR_DEVICE_ATTR_RW(temp3_offset, temp_offset, 2); -temp_offset_reg(1); -temp_offset_reg(2); -temp_offset_reg(3); - -static ssize_t show_temp_auto_point1_temp_hyst(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t temp_auto_point1_temp_hyst_show(struct device *dev, + struct device_attribute *attr, + char *buf) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -907,8 +925,9 @@ static ssize_t show_temp_auto_point1_temp_hyst(struct device *dev, return sprintf(buf, "%d\n", TEMP_FROM_REG( ADM1026_FAN_ACTIVATION_TEMP_HYST + data->temp_tmin[nr])); } -static ssize_t show_temp_auto_point2_temp(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t temp_auto_point2_temp_show(struct device *dev, + struct device_attribute *attr, + char *buf) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -916,16 +935,18 @@ static ssize_t show_temp_auto_point2_temp(struct device *dev, return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_tmin[nr] + ADM1026_FAN_CONTROL_TEMP_RANGE)); } -static ssize_t show_temp_auto_point1_temp(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t temp_auto_point1_temp_show(struct device *dev, + struct device_attribute *attr, + char *buf) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; struct adm1026_data *data = adm1026_update_device(dev); return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_tmin[nr])); } -static ssize_t set_temp_auto_point1_temp(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) +static ssize_t temp_auto_point1_temp_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -946,18 +967,18 @@ static ssize_t set_temp_auto_point1_temp(struct device *dev, return count; } -#define temp_auto_point(offset) \ -static SENSOR_DEVICE_ATTR(temp##offset##_auto_point1_temp, \ - S_IRUGO | S_IWUSR, show_temp_auto_point1_temp, \ - set_temp_auto_point1_temp, offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_auto_point1_temp_hyst, S_IRUGO,\ - show_temp_auto_point1_temp_hyst, NULL, offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_auto_point2_temp, S_IRUGO, \ - show_temp_auto_point2_temp, NULL, offset - 1); - -temp_auto_point(1); -temp_auto_point(2); -temp_auto_point(3); +static SENSOR_DEVICE_ATTR_RW(temp1_auto_point1_temp, temp_auto_point1_temp, 0); +static SENSOR_DEVICE_ATTR_RO(temp1_auto_point1_temp_hyst, + temp_auto_point1_temp_hyst, 0); +static SENSOR_DEVICE_ATTR_RO(temp1_auto_point2_temp, temp_auto_point2_temp, 0); +static SENSOR_DEVICE_ATTR_RW(temp2_auto_point1_temp, temp_auto_point1_temp, 1); +static SENSOR_DEVICE_ATTR_RO(temp2_auto_point1_temp_hyst, + temp_auto_point1_temp_hyst, 1); +static SENSOR_DEVICE_ATTR_RO(temp2_auto_point2_temp, temp_auto_point2_temp, 1); +static SENSOR_DEVICE_ATTR_RW(temp3_auto_point1_temp, temp_auto_point1_temp, 2); +static SENSOR_DEVICE_ATTR_RO(temp3_auto_point1_temp_hyst, + temp_auto_point1_temp_hyst, 2); +static SENSOR_DEVICE_ATTR_RO(temp3_auto_point2_temp, temp_auto_point2_temp, 2); static ssize_t show_temp_crit_enable(struct device *dev, struct device_attribute *attr, char *buf) @@ -988,24 +1009,24 @@ static ssize_t set_temp_crit_enable(struct device *dev, return count; } -#define temp_crit_enable(offset) \ -static DEVICE_ATTR(temp##offset##_crit_enable, S_IRUGO | S_IWUSR, \ - show_temp_crit_enable, set_temp_crit_enable); +static DEVICE_ATTR(temp1_crit_enable, 0644, show_temp_crit_enable, + set_temp_crit_enable); +static DEVICE_ATTR(temp2_crit_enable, 0644, show_temp_crit_enable, + set_temp_crit_enable); +static DEVICE_ATTR(temp3_crit_enable, 0644, show_temp_crit_enable, + set_temp_crit_enable); -temp_crit_enable(1); -temp_crit_enable(2); -temp_crit_enable(3); - -static ssize_t show_temp_crit(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t temp_crit_show(struct device *dev, + struct device_attribute *attr, char *buf) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; struct adm1026_data *data = adm1026_update_device(dev); return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit[nr])); } -static ssize_t set_temp_crit(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t temp_crit_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -1026,13 +1047,9 @@ static ssize_t set_temp_crit(struct device *dev, struct device_attribute *attr, return count; } -#define temp_crit_reg(offset) \ -static SENSOR_DEVICE_ATTR(temp##offset##_crit, S_IRUGO | S_IWUSR, \ - show_temp_crit, set_temp_crit, offset - 1); - -temp_crit_reg(1); -temp_crit_reg(2); -temp_crit_reg(3); +static SENSOR_DEVICE_ATTR_RW(temp1_crit, temp_crit, 0); +static SENSOR_DEVICE_ATTR_RW(temp2_crit, temp_crit, 1); +static SENSOR_DEVICE_ATTR_RW(temp3_crit, temp_crit, 2); static ssize_t analog_out_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -1110,7 +1127,7 @@ static ssize_t alarms_show(struct device *dev, struct device_attribute *attr, static DEVICE_ATTR_RO(alarms); -static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, +static ssize_t alarm_show(struct device *dev, struct device_attribute *attr, char *buf) { struct adm1026_data *data = adm1026_update_device(dev); @@ -1118,34 +1135,34 @@ static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%ld\n", (data->alarms >> bitnr) & 1); } -static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 0); -static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 1); -static SENSOR_DEVICE_ATTR(in9_alarm, S_IRUGO, show_alarm, NULL, 1); -static SENSOR_DEVICE_ATTR(in11_alarm, S_IRUGO, show_alarm, NULL, 2); -static SENSOR_DEVICE_ATTR(in12_alarm, S_IRUGO, show_alarm, NULL, 3); -static SENSOR_DEVICE_ATTR(in13_alarm, S_IRUGO, show_alarm, NULL, 4); -static SENSOR_DEVICE_ATTR(in14_alarm, S_IRUGO, show_alarm, NULL, 5); -static SENSOR_DEVICE_ATTR(in15_alarm, S_IRUGO, show_alarm, NULL, 6); -static SENSOR_DEVICE_ATTR(in16_alarm, S_IRUGO, show_alarm, NULL, 7); -static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 8); -static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 9); -static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 10); -static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 11); -static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 12); -static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 13); -static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 14); -static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 15); -static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 16); -static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 17); -static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 18); -static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, 19); -static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, 20); -static SENSOR_DEVICE_ATTR(fan6_alarm, S_IRUGO, show_alarm, NULL, 21); -static SENSOR_DEVICE_ATTR(fan7_alarm, S_IRUGO, show_alarm, NULL, 22); -static SENSOR_DEVICE_ATTR(fan8_alarm, S_IRUGO, show_alarm, NULL, 23); -static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 24); -static SENSOR_DEVICE_ATTR(in10_alarm, S_IRUGO, show_alarm, NULL, 25); -static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, 26); +static SENSOR_DEVICE_ATTR_RO(temp2_alarm, alarm, 0); +static SENSOR_DEVICE_ATTR_RO(temp3_alarm, alarm, 1); +static SENSOR_DEVICE_ATTR_RO(in9_alarm, alarm, 1); +static SENSOR_DEVICE_ATTR_RO(in11_alarm, alarm, 2); +static SENSOR_DEVICE_ATTR_RO(in12_alarm, alarm, 3); +static SENSOR_DEVICE_ATTR_RO(in13_alarm, alarm, 4); +static SENSOR_DEVICE_ATTR_RO(in14_alarm, alarm, 5); +static SENSOR_DEVICE_ATTR_RO(in15_alarm, alarm, 6); +static SENSOR_DEVICE_ATTR_RO(in16_alarm, alarm, 7); +static SENSOR_DEVICE_ATTR_RO(in0_alarm, alarm, 8); +static SENSOR_DEVICE_ATTR_RO(in1_alarm, alarm, 9); +static SENSOR_DEVICE_ATTR_RO(in2_alarm, alarm, 10); +static SENSOR_DEVICE_ATTR_RO(in3_alarm, alarm, 11); +static SENSOR_DEVICE_ATTR_RO(in4_alarm, alarm, 12); +static SENSOR_DEVICE_ATTR_RO(in5_alarm, alarm, 13); +static SENSOR_DEVICE_ATTR_RO(in6_alarm, alarm, 14); +static SENSOR_DEVICE_ATTR_RO(in7_alarm, alarm, 15); +static SENSOR_DEVICE_ATTR_RO(fan1_alarm, alarm, 16); +static SENSOR_DEVICE_ATTR_RO(fan2_alarm, alarm, 17); +static SENSOR_DEVICE_ATTR_RO(fan3_alarm, alarm, 18); +static SENSOR_DEVICE_ATTR_RO(fan4_alarm, alarm, 19); +static SENSOR_DEVICE_ATTR_RO(fan5_alarm, alarm, 20); +static SENSOR_DEVICE_ATTR_RO(fan6_alarm, alarm, 21); +static SENSOR_DEVICE_ATTR_RO(fan7_alarm, alarm, 22); +static SENSOR_DEVICE_ATTR_RO(fan8_alarm, alarm, 23); +static SENSOR_DEVICE_ATTR_RO(temp1_alarm, alarm, 24); +static SENSOR_DEVICE_ATTR_RO(in10_alarm, alarm, 25); +static SENSOR_DEVICE_ATTR_RO(in8_alarm, alarm, 26); static ssize_t alarm_mask_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -1188,7 +1205,6 @@ static ssize_t alarm_mask_store(struct device *dev, static DEVICE_ATTR_RW(alarm_mask); - static ssize_t gpio_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -1371,23 +1387,23 @@ static ssize_t pwm1_enable_store(struct device *dev, /* enable PWM fan control */ static DEVICE_ATTR_RW(pwm1); -static DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, pwm1_show, pwm1_store); -static DEVICE_ATTR(pwm3, S_IRUGO | S_IWUSR, pwm1_show, pwm1_store); +static DEVICE_ATTR(pwm2, 0644, pwm1_show, pwm1_store); +static DEVICE_ATTR(pwm3, 0644, pwm1_show, pwm1_store); static DEVICE_ATTR_RW(pwm1_enable); -static DEVICE_ATTR(pwm2_enable, S_IRUGO | S_IWUSR, pwm1_enable_show, +static DEVICE_ATTR(pwm2_enable, 0644, pwm1_enable_show, pwm1_enable_store); -static DEVICE_ATTR(pwm3_enable, S_IRUGO | S_IWUSR, pwm1_enable_show, +static DEVICE_ATTR(pwm3_enable, 0644, pwm1_enable_show, pwm1_enable_store); static DEVICE_ATTR_RW(temp1_auto_point1_pwm); -static DEVICE_ATTR(temp2_auto_point1_pwm, S_IRUGO | S_IWUSR, - temp1_auto_point1_pwm_show, temp1_auto_point1_pwm_store); -static DEVICE_ATTR(temp3_auto_point1_pwm, S_IRUGO | S_IWUSR, - temp1_auto_point1_pwm_show, temp1_auto_point1_pwm_store); +static DEVICE_ATTR(temp2_auto_point1_pwm, 0644, + temp1_auto_point1_pwm_show, temp1_auto_point1_pwm_store); +static DEVICE_ATTR(temp3_auto_point1_pwm, 0644, + temp1_auto_point1_pwm_show, temp1_auto_point1_pwm_store); static DEVICE_ATTR_RO(temp1_auto_point2_pwm); -static DEVICE_ATTR(temp2_auto_point2_pwm, S_IRUGO, temp1_auto_point2_pwm_show, +static DEVICE_ATTR(temp2_auto_point2_pwm, 0444, temp1_auto_point2_pwm_show, NULL); -static DEVICE_ATTR(temp3_auto_point2_pwm, S_IRUGO, temp1_auto_point2_pwm_show, +static DEVICE_ATTR(temp3_auto_point2_pwm, 0444, temp1_auto_point2_pwm_show, NULL); static struct attribute *adm1026_attributes[] = { From 7352ae8d00118496b8346ecbc82fbc785077894a Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 21 Jan 2019 20:18:52 -0800 Subject: [PATCH 059/125] hwmon: (adm9240) Use permission specific SENSOR[_DEVICE]_ATTR variants Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code, to improve readbility, and to reduce the chance of inconsistencies. Also replace any remaining S_ in the driver with octal values. The conversion was done automatically with coccinelle. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches/. This patch does not introduce functional changes. It was verified by compiling the old and new files and comparing text and data sizes. Signed-off-by: Guenter Roeck --- drivers/hwmon/adm9240.c | 135 +++++++++++++++++++--------------------- 1 file changed, 65 insertions(+), 70 deletions(-) diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c index 255413fdbde9..000b20f1db71 100644 --- a/drivers/hwmon/adm9240.c +++ b/drivers/hwmon/adm9240.c @@ -269,16 +269,16 @@ static ssize_t temp1_input_show(struct device *dev, return sprintf(buf, "%d\n", data->temp / 128 * 500); /* 9-bit value */ } -static ssize_t show_max(struct device *dev, struct device_attribute *devattr, - char *buf) +static ssize_t max_show(struct device *dev, struct device_attribute *devattr, + char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct adm9240_data *data = adm9240_update_device(dev); return sprintf(buf, "%d\n", data->temp_max[attr->index] * 1000); } -static ssize_t set_max(struct device *dev, struct device_attribute *devattr, - const char *buf, size_t count) +static ssize_t max_store(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct adm9240_data *data = dev_get_drvdata(dev); @@ -299,14 +299,12 @@ static ssize_t set_max(struct device *dev, struct device_attribute *devattr, } static DEVICE_ATTR_RO(temp1_input); -static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, - show_max, set_max, 0); -static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, - show_max, set_max, 1); +static SENSOR_DEVICE_ATTR_RW(temp1_max, max, 0); +static SENSOR_DEVICE_ATTR_RW(temp1_max_hyst, max, 1); /* voltage */ -static ssize_t show_in(struct device *dev, struct device_attribute *devattr, - char *buf) +static ssize_t in_show(struct device *dev, struct device_attribute *devattr, + char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct adm9240_data *data = adm9240_update_device(dev); @@ -314,8 +312,8 @@ static ssize_t show_in(struct device *dev, struct device_attribute *devattr, attr->index)); } -static ssize_t show_in_min(struct device *dev, - struct device_attribute *devattr, char *buf) +static ssize_t in_min_show(struct device *dev, + struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct adm9240_data *data = adm9240_update_device(dev); @@ -323,8 +321,8 @@ static ssize_t show_in_min(struct device *dev, attr->index)); } -static ssize_t show_in_max(struct device *dev, - struct device_attribute *devattr, char *buf) +static ssize_t in_max_show(struct device *dev, + struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct adm9240_data *data = adm9240_update_device(dev); @@ -332,9 +330,9 @@ static ssize_t show_in_max(struct device *dev, attr->index)); } -static ssize_t set_in_min(struct device *dev, - struct device_attribute *devattr, - const char *buf, size_t count) +static ssize_t in_min_store(struct device *dev, + struct device_attribute *devattr, const char *buf, + size_t count) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct adm9240_data *data = dev_get_drvdata(dev); @@ -354,9 +352,9 @@ static ssize_t set_in_min(struct device *dev, return count; } -static ssize_t set_in_max(struct device *dev, - struct device_attribute *devattr, - const char *buf, size_t count) +static ssize_t in_max_store(struct device *dev, + struct device_attribute *devattr, const char *buf, + size_t count) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct adm9240_data *data = dev_get_drvdata(dev); @@ -376,24 +374,28 @@ static ssize_t set_in_max(struct device *dev, return count; } -#define vin(nr) \ -static SENSOR_DEVICE_ATTR(in##nr##_input, S_IRUGO, \ - show_in, NULL, nr); \ -static SENSOR_DEVICE_ATTR(in##nr##_min, S_IRUGO | S_IWUSR, \ - show_in_min, set_in_min, nr); \ -static SENSOR_DEVICE_ATTR(in##nr##_max, S_IRUGO | S_IWUSR, \ - show_in_max, set_in_max, nr); - -vin(0); -vin(1); -vin(2); -vin(3); -vin(4); -vin(5); +static SENSOR_DEVICE_ATTR_RO(in0_input, in, 0); +static SENSOR_DEVICE_ATTR_RW(in0_min, in_min, 0); +static SENSOR_DEVICE_ATTR_RW(in0_max, in_max, 0); +static SENSOR_DEVICE_ATTR_RO(in1_input, in, 1); +static SENSOR_DEVICE_ATTR_RW(in1_min, in_min, 1); +static SENSOR_DEVICE_ATTR_RW(in1_max, in_max, 1); +static SENSOR_DEVICE_ATTR_RO(in2_input, in, 2); +static SENSOR_DEVICE_ATTR_RW(in2_min, in_min, 2); +static SENSOR_DEVICE_ATTR_RW(in2_max, in_max, 2); +static SENSOR_DEVICE_ATTR_RO(in3_input, in, 3); +static SENSOR_DEVICE_ATTR_RW(in3_min, in_min, 3); +static SENSOR_DEVICE_ATTR_RW(in3_max, in_max, 3); +static SENSOR_DEVICE_ATTR_RO(in4_input, in, 4); +static SENSOR_DEVICE_ATTR_RW(in4_min, in_min, 4); +static SENSOR_DEVICE_ATTR_RW(in4_max, in_max, 4); +static SENSOR_DEVICE_ATTR_RO(in5_input, in, 5); +static SENSOR_DEVICE_ATTR_RW(in5_min, in_min, 5); +static SENSOR_DEVICE_ATTR_RW(in5_max, in_max, 5); /* fans */ -static ssize_t show_fan(struct device *dev, - struct device_attribute *devattr, char *buf) +static ssize_t fan_show(struct device *dev, struct device_attribute *devattr, + char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct adm9240_data *data = adm9240_update_device(dev); @@ -401,8 +403,8 @@ static ssize_t show_fan(struct device *dev, 1 << data->fan_div[attr->index])); } -static ssize_t show_fan_min(struct device *dev, - struct device_attribute *devattr, char *buf) +static ssize_t fan_min_show(struct device *dev, + struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct adm9240_data *data = adm9240_update_device(dev); @@ -410,8 +412,8 @@ static ssize_t show_fan_min(struct device *dev, 1 << data->fan_div[attr->index])); } -static ssize_t show_fan_div(struct device *dev, - struct device_attribute *devattr, char *buf) +static ssize_t fan_div_show(struct device *dev, + struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct adm9240_data *data = adm9240_update_device(dev); @@ -429,9 +431,9 @@ static ssize_t show_fan_div(struct device *dev, * - otherwise: select fan clock divider to suit fan speed low limit, * measurement code may adjust registers to ensure fan speed reading */ -static ssize_t set_fan_min(struct device *dev, - struct device_attribute *devattr, - const char *buf, size_t count) +static ssize_t fan_min_store(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct adm9240_data *data = dev_get_drvdata(dev); @@ -489,16 +491,12 @@ static ssize_t set_fan_min(struct device *dev, return count; } -#define fan(nr) \ -static SENSOR_DEVICE_ATTR(fan##nr##_input, S_IRUGO, \ - show_fan, NULL, nr - 1); \ -static SENSOR_DEVICE_ATTR(fan##nr##_div, S_IRUGO, \ - show_fan_div, NULL, nr - 1); \ -static SENSOR_DEVICE_ATTR(fan##nr##_min, S_IRUGO | S_IWUSR, \ - show_fan_min, set_fan_min, nr - 1); - -fan(1); -fan(2); +static SENSOR_DEVICE_ATTR_RO(fan1_input, fan, 0); +static SENSOR_DEVICE_ATTR_RW(fan1_min, fan_min, 0); +static SENSOR_DEVICE_ATTR_RO(fan1_div, fan_div, 0); +static SENSOR_DEVICE_ATTR_RO(fan2_input, fan, 1); +static SENSOR_DEVICE_ATTR_RW(fan2_min, fan_min, 1); +static SENSOR_DEVICE_ATTR_RO(fan2_div, fan_div, 1); /* alarms */ static ssize_t alarms_show(struct device *dev, @@ -509,22 +507,22 @@ static ssize_t alarms_show(struct device *dev, } static DEVICE_ATTR_RO(alarms); -static ssize_t show_alarm(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t alarm_show(struct device *dev, struct device_attribute *attr, + char *buf) { int bitnr = to_sensor_dev_attr(attr)->index; struct adm9240_data *data = adm9240_update_device(dev); return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1); } -static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0); -static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1); -static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2); -static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3); -static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8); -static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 9); -static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4); -static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6); -static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7); +static SENSOR_DEVICE_ATTR_RO(in0_alarm, alarm, 0); +static SENSOR_DEVICE_ATTR_RO(in1_alarm, alarm, 1); +static SENSOR_DEVICE_ATTR_RO(in2_alarm, alarm, 2); +static SENSOR_DEVICE_ATTR_RO(in3_alarm, alarm, 3); +static SENSOR_DEVICE_ATTR_RO(in4_alarm, alarm, 8); +static SENSOR_DEVICE_ATTR_RO(in5_alarm, alarm, 9); +static SENSOR_DEVICE_ATTR_RO(temp1_alarm, alarm, 4); +static SENSOR_DEVICE_ATTR_RO(fan1_alarm, alarm, 6); +static SENSOR_DEVICE_ATTR_RO(fan2_alarm, alarm, 7); /* vid */ static ssize_t cpu0_vid_show(struct device *dev, @@ -564,9 +562,8 @@ static ssize_t aout_output_store(struct device *dev, } static DEVICE_ATTR_RW(aout_output); -static ssize_t chassis_clear(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t alarm_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { struct adm9240_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; @@ -583,8 +580,7 @@ static ssize_t chassis_clear(struct device *dev, return count; } -static SENSOR_DEVICE_ATTR(intrusion0_alarm, S_IRUGO | S_IWUSR, show_alarm, - chassis_clear, 12); +static SENSOR_DEVICE_ATTR_RW(intrusion0_alarm, alarm, 12); static struct attribute *adm9240_attrs[] = { &sensor_dev_attr_in0_input.dev_attr.attr, @@ -632,7 +628,6 @@ static struct attribute *adm9240_attrs[] = { ATTRIBUTE_GROUPS(adm9240); - /*** sensor chip detect and driver install ***/ /* Return 0 if detection is successful, -ENODEV otherwise */ From 29168f30e33b27cfbd3b6da4df59b1a20ac62b63 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 21 Jan 2019 20:26:58 -0800 Subject: [PATCH 060/125] hwmon: (thmc50) Use permission specific SENSOR[_DEVICE]_ATTR variants Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code, to improve readbility, and to reduce the chance of inconsistencies. Also replace any remaining S_ in the driver with octal values. The conversion was done automatically with coccinelle. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches/. This patch does not introduce functional changes. It was verified by compiling the old and new files and comparing text and data sizes. Signed-off-by: Guenter Roeck --- drivers/hwmon/thmc50.c | 79 +++++++++++++++++++++--------------------- 1 file changed, 39 insertions(+), 40 deletions(-) diff --git a/drivers/hwmon/thmc50.c b/drivers/hwmon/thmc50.c index 6a0ee903127e..ae9942331cae 100644 --- a/drivers/hwmon/thmc50.c +++ b/drivers/hwmon/thmc50.c @@ -128,16 +128,16 @@ static struct thmc50_data *thmc50_update_device(struct device *dev) return data; } -static ssize_t show_analog_out(struct device *dev, +static ssize_t analog_out_show(struct device *dev, struct device_attribute *attr, char *buf) { struct thmc50_data *data = thmc50_update_device(dev); return sprintf(buf, "%d\n", data->analog_out); } -static ssize_t set_analog_out(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t analog_out_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) { struct thmc50_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; @@ -166,14 +166,14 @@ static ssize_t set_analog_out(struct device *dev, } /* There is only one PWM mode = DC */ -static ssize_t show_pwm_mode(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t pwm_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) { return sprintf(buf, "0\n"); } /* Temperatures */ -static ssize_t show_temp(struct device *dev, struct device_attribute *attr, +static ssize_t temp_show(struct device *dev, struct device_attribute *attr, char *buf) { int nr = to_sensor_dev_attr(attr)->index; @@ -181,16 +181,17 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%d\n", data->temp_input[nr] * 1000); } -static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t temp_min_show(struct device *dev, + struct device_attribute *attr, char *buf) { int nr = to_sensor_dev_attr(attr)->index; struct thmc50_data *data = thmc50_update_device(dev); return sprintf(buf, "%d\n", data->temp_min[nr] * 1000); } -static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t temp_min_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) { int nr = to_sensor_dev_attr(attr)->index; struct thmc50_data *data = dev_get_drvdata(dev); @@ -210,16 +211,17 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, return count; } -static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t temp_max_show(struct device *dev, + struct device_attribute *attr, char *buf) { int nr = to_sensor_dev_attr(attr)->index; struct thmc50_data *data = thmc50_update_device(dev); return sprintf(buf, "%d\n", data->temp_max[nr] * 1000); } -static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t temp_max_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) { int nr = to_sensor_dev_attr(attr)->index; struct thmc50_data *data = dev_get_drvdata(dev); @@ -239,16 +241,15 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, return count; } -static ssize_t show_temp_critical(struct device *dev, - struct device_attribute *attr, - char *buf) +static ssize_t temp_critical_show(struct device *dev, + struct device_attribute *attr, char *buf) { int nr = to_sensor_dev_attr(attr)->index; struct thmc50_data *data = thmc50_update_device(dev); return sprintf(buf, "%d\n", data->temp_critical[nr] * 1000); } -static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, +static ssize_t alarm_show(struct device *dev, struct device_attribute *attr, char *buf) { int index = to_sensor_dev_attr(attr)->index; @@ -257,29 +258,27 @@ static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%u\n", (data->alarms >> index) & 1); } -#define temp_reg(offset) \ -static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp, \ - NULL, offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \ - show_temp_min, set_temp_min, offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \ - show_temp_max, set_temp_max, offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_crit, S_IRUGO, \ - show_temp_critical, NULL, offset - 1); +static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, 0); +static SENSOR_DEVICE_ATTR_RW(temp1_min, temp_min, 0); +static SENSOR_DEVICE_ATTR_RW(temp1_max, temp_max, 0); +static SENSOR_DEVICE_ATTR_RO(temp1_crit, temp_critical, 0); +static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, 1); +static SENSOR_DEVICE_ATTR_RW(temp2_min, temp_min, 1); +static SENSOR_DEVICE_ATTR_RW(temp2_max, temp_max, 1); +static SENSOR_DEVICE_ATTR_RO(temp2_crit, temp_critical, 1); +static SENSOR_DEVICE_ATTR_RO(temp3_input, temp, 2); +static SENSOR_DEVICE_ATTR_RW(temp3_min, temp_min, 2); +static SENSOR_DEVICE_ATTR_RW(temp3_max, temp_max, 2); +static SENSOR_DEVICE_ATTR_RO(temp3_crit, temp_critical, 2); -temp_reg(1); -temp_reg(2); -temp_reg(3); +static SENSOR_DEVICE_ATTR_RO(temp1_alarm, alarm, 0); +static SENSOR_DEVICE_ATTR_RO(temp2_alarm, alarm, 5); +static SENSOR_DEVICE_ATTR_RO(temp3_alarm, alarm, 1); +static SENSOR_DEVICE_ATTR_RO(temp2_fault, alarm, 7); +static SENSOR_DEVICE_ATTR_RO(temp3_fault, alarm, 2); -static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 0); -static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5); -static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 1); -static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 7); -static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 2); - -static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_analog_out, - set_analog_out, 0); -static SENSOR_DEVICE_ATTR(pwm1_mode, S_IRUGO, show_pwm_mode, NULL, 0); +static SENSOR_DEVICE_ATTR_RW(pwm1, analog_out, 0); +static SENSOR_DEVICE_ATTR_RO(pwm1_mode, pwm_mode, 0); static struct attribute *thmc50_attributes[] = { &sensor_dev_attr_temp1_max.dev_attr.attr, From 8e757e15a509b8623fd02f18c65eedcc1ed9fed3 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 21 Jan 2019 20:37:22 -0800 Subject: [PATCH 061/125] hwmon: (adm1031) Use permission specific SENSOR[_DEVICE]_ATTR variants Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code, to improve readbility, and to reduce the chance of inconsistencies. Also replace any remaining S_ in the driver with octal values. The conversion was done automatically with coccinelle. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches/. This patch does not introduce functional changes. It was verified by compiling the old and new files and comparing text and data sizes. Signed-off-by: Guenter Roeck --- drivers/hwmon/adm1031.c | 201 +++++++++++++++++++--------------------- 1 file changed, 97 insertions(+), 104 deletions(-) diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c index bcf508269fd6..6b46d8eaa775 100644 --- a/drivers/hwmon/adm1031.c +++ b/drivers/hwmon/adm1031.c @@ -331,7 +331,7 @@ get_fan_auto_nearest(struct adm1031_data *data, int chan, u8 val, u8 reg) return -EINVAL; } -static ssize_t show_fan_auto_channel(struct device *dev, +static ssize_t fan_auto_channel_show(struct device *dev, struct device_attribute *attr, char *buf) { int nr = to_sensor_dev_attr(attr)->index; @@ -340,8 +340,8 @@ static ssize_t show_fan_auto_channel(struct device *dev, } static ssize_t -set_fan_auto_channel(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +fan_auto_channel_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { struct adm1031_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; @@ -392,13 +392,11 @@ set_fan_auto_channel(struct device *dev, struct device_attribute *attr, return count; } -static SENSOR_DEVICE_ATTR(auto_fan1_channel, S_IRUGO | S_IWUSR, - show_fan_auto_channel, set_fan_auto_channel, 0); -static SENSOR_DEVICE_ATTR(auto_fan2_channel, S_IRUGO | S_IWUSR, - show_fan_auto_channel, set_fan_auto_channel, 1); +static SENSOR_DEVICE_ATTR_RW(auto_fan1_channel, fan_auto_channel, 0); +static SENSOR_DEVICE_ATTR_RW(auto_fan2_channel, fan_auto_channel, 1); /* Auto Temps */ -static ssize_t show_auto_temp_off(struct device *dev, +static ssize_t auto_temp_off_show(struct device *dev, struct device_attribute *attr, char *buf) { int nr = to_sensor_dev_attr(attr)->index; @@ -406,7 +404,7 @@ static ssize_t show_auto_temp_off(struct device *dev, return sprintf(buf, "%d\n", AUTO_TEMP_OFF_FROM_REG(data->auto_temp[nr])); } -static ssize_t show_auto_temp_min(struct device *dev, +static ssize_t auto_temp_min_show(struct device *dev, struct device_attribute *attr, char *buf) { int nr = to_sensor_dev_attr(attr)->index; @@ -415,8 +413,8 @@ static ssize_t show_auto_temp_min(struct device *dev, AUTO_TEMP_MIN_FROM_REG(data->auto_temp[nr])); } static ssize_t -set_auto_temp_min(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +auto_temp_min_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { struct adm1031_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; @@ -436,7 +434,7 @@ set_auto_temp_min(struct device *dev, struct device_attribute *attr, mutex_unlock(&data->update_lock); return count; } -static ssize_t show_auto_temp_max(struct device *dev, +static ssize_t auto_temp_max_show(struct device *dev, struct device_attribute *attr, char *buf) { int nr = to_sensor_dev_attr(attr)->index; @@ -445,8 +443,8 @@ static ssize_t show_auto_temp_max(struct device *dev, AUTO_TEMP_MAX_FROM_REG(data->auto_temp[nr])); } static ssize_t -set_auto_temp_max(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +auto_temp_max_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { struct adm1031_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; @@ -468,28 +466,26 @@ set_auto_temp_max(struct device *dev, struct device_attribute *attr, return count; } -#define auto_temp_reg(offset) \ -static SENSOR_DEVICE_ATTR(auto_temp##offset##_off, S_IRUGO, \ - show_auto_temp_off, NULL, offset - 1); \ -static SENSOR_DEVICE_ATTR(auto_temp##offset##_min, S_IRUGO | S_IWUSR, \ - show_auto_temp_min, set_auto_temp_min, offset - 1); \ -static SENSOR_DEVICE_ATTR(auto_temp##offset##_max, S_IRUGO | S_IWUSR, \ - show_auto_temp_max, set_auto_temp_max, offset - 1) - -auto_temp_reg(1); -auto_temp_reg(2); -auto_temp_reg(3); +static SENSOR_DEVICE_ATTR_RO(auto_temp1_off, auto_temp_off, 0); +static SENSOR_DEVICE_ATTR_RW(auto_temp1_min, auto_temp_min, 0); +static SENSOR_DEVICE_ATTR_RW(auto_temp1_max, auto_temp_max, 0); +static SENSOR_DEVICE_ATTR_RO(auto_temp2_off, auto_temp_off, 1); +static SENSOR_DEVICE_ATTR_RW(auto_temp2_min, auto_temp_min, 1); +static SENSOR_DEVICE_ATTR_RW(auto_temp2_max, auto_temp_max, 1); +static SENSOR_DEVICE_ATTR_RO(auto_temp3_off, auto_temp_off, 2); +static SENSOR_DEVICE_ATTR_RW(auto_temp3_min, auto_temp_min, 2); +static SENSOR_DEVICE_ATTR_RW(auto_temp3_max, auto_temp_max, 2); /* pwm */ -static ssize_t show_pwm(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t pwm_show(struct device *dev, struct device_attribute *attr, + char *buf) { int nr = to_sensor_dev_attr(attr)->index; struct adm1031_data *data = adm1031_update_device(dev); return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm[nr])); } -static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t pwm_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { struct adm1031_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; @@ -517,12 +513,10 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, return count; } -static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm, set_pwm, 0); -static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, show_pwm, set_pwm, 1); -static SENSOR_DEVICE_ATTR(auto_fan1_min_pwm, S_IRUGO | S_IWUSR, - show_pwm, set_pwm, 0); -static SENSOR_DEVICE_ATTR(auto_fan2_min_pwm, S_IRUGO | S_IWUSR, - show_pwm, set_pwm, 1); +static SENSOR_DEVICE_ATTR_RW(pwm1, pwm, 0); +static SENSOR_DEVICE_ATTR_RW(pwm2, pwm, 1); +static SENSOR_DEVICE_ATTR_RW(auto_fan1_min_pwm, pwm, 0); +static SENSOR_DEVICE_ATTR_RW(auto_fan2_min_pwm, pwm, 1); /* Fans */ @@ -572,9 +566,8 @@ static int trust_fan_readings(struct adm1031_data *data, int chan) return res; } - -static ssize_t show_fan(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t fan_show(struct device *dev, struct device_attribute *attr, + char *buf) { int nr = to_sensor_dev_attr(attr)->index; struct adm1031_data *data = adm1031_update_device(dev); @@ -585,15 +578,15 @@ static ssize_t show_fan(struct device *dev, return sprintf(buf, "%d\n", value); } -static ssize_t show_fan_div(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t fan_div_show(struct device *dev, struct device_attribute *attr, + char *buf) { int nr = to_sensor_dev_attr(attr)->index; struct adm1031_data *data = adm1031_update_device(dev); return sprintf(buf, "%d\n", FAN_DIV_FROM_REG(data->fan_div[nr])); } -static ssize_t show_fan_min(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t fan_min_show(struct device *dev, struct device_attribute *attr, + char *buf) { int nr = to_sensor_dev_attr(attr)->index; struct adm1031_data *data = adm1031_update_device(dev); @@ -601,8 +594,9 @@ static ssize_t show_fan_min(struct device *dev, FAN_FROM_REG(data->fan_min[nr], FAN_DIV_FROM_REG(data->fan_div[nr]))); } -static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t fan_min_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) { struct adm1031_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; @@ -625,8 +619,9 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr, mutex_unlock(&data->update_lock); return count; } -static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t fan_div_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) { struct adm1031_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; @@ -673,21 +668,16 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr, return count; } -#define fan_offset(offset) \ -static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \ - show_fan, NULL, offset - 1); \ -static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ - show_fan_min, set_fan_min, offset - 1); \ -static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \ - show_fan_div, set_fan_div, offset - 1) - -fan_offset(1); -fan_offset(2); - +static SENSOR_DEVICE_ATTR_RO(fan1_input, fan, 0); +static SENSOR_DEVICE_ATTR_RW(fan1_min, fan_min, 0); +static SENSOR_DEVICE_ATTR_RW(fan1_div, fan_div, 0); +static SENSOR_DEVICE_ATTR_RO(fan2_input, fan, 1); +static SENSOR_DEVICE_ATTR_RW(fan2_min, fan_min, 1); +static SENSOR_DEVICE_ATTR_RW(fan2_div, fan_div, 1); /* Temps */ -static ssize_t show_temp(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t temp_show(struct device *dev, struct device_attribute *attr, + char *buf) { int nr = to_sensor_dev_attr(attr)->index; struct adm1031_data *data = adm1031_update_device(dev); @@ -697,7 +687,7 @@ static ssize_t show_temp(struct device *dev, (((data->ext_temp[nr] >> ((nr - 1) * 3)) & 7)); return sprintf(buf, "%d\n", TEMP_FROM_REG_EXT(data->temp[nr], ext)); } -static ssize_t show_temp_offset(struct device *dev, +static ssize_t temp_offset_show(struct device *dev, struct device_attribute *attr, char *buf) { int nr = to_sensor_dev_attr(attr)->index; @@ -705,30 +695,30 @@ static ssize_t show_temp_offset(struct device *dev, return sprintf(buf, "%d\n", TEMP_OFFSET_FROM_REG(data->temp_offset[nr])); } -static ssize_t show_temp_min(struct device *dev, +static ssize_t temp_min_show(struct device *dev, struct device_attribute *attr, char *buf) { int nr = to_sensor_dev_attr(attr)->index; struct adm1031_data *data = adm1031_update_device(dev); return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[nr])); } -static ssize_t show_temp_max(struct device *dev, +static ssize_t temp_max_show(struct device *dev, struct device_attribute *attr, char *buf) { int nr = to_sensor_dev_attr(attr)->index; struct adm1031_data *data = adm1031_update_device(dev); return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[nr])); } -static ssize_t show_temp_crit(struct device *dev, +static ssize_t temp_crit_show(struct device *dev, struct device_attribute *attr, char *buf) { int nr = to_sensor_dev_attr(attr)->index; struct adm1031_data *data = adm1031_update_device(dev); return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit[nr])); } -static ssize_t set_temp_offset(struct device *dev, - struct device_attribute *attr, const char *buf, - size_t count) +static ssize_t temp_offset_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) { struct adm1031_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; @@ -748,8 +738,9 @@ static ssize_t set_temp_offset(struct device *dev, mutex_unlock(&data->update_lock); return count; } -static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t temp_min_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) { struct adm1031_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; @@ -769,8 +760,9 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, mutex_unlock(&data->update_lock); return count; } -static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t temp_max_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) { struct adm1031_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; @@ -790,8 +782,9 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, mutex_unlock(&data->update_lock); return count; } -static ssize_t set_temp_crit(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t temp_crit_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) { struct adm1031_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; @@ -812,21 +805,21 @@ static ssize_t set_temp_crit(struct device *dev, struct device_attribute *attr, return count; } -#define temp_reg(offset) \ -static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \ - show_temp, NULL, offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_offset, S_IRUGO | S_IWUSR, \ - show_temp_offset, set_temp_offset, offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \ - show_temp_min, set_temp_min, offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \ - show_temp_max, set_temp_max, offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_crit, S_IRUGO | S_IWUSR, \ - show_temp_crit, set_temp_crit, offset - 1) - -temp_reg(1); -temp_reg(2); -temp_reg(3); +static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, 0); +static SENSOR_DEVICE_ATTR_RW(temp1_offset, temp_offset, 0); +static SENSOR_DEVICE_ATTR_RW(temp1_min, temp_min, 0); +static SENSOR_DEVICE_ATTR_RW(temp1_max, temp_max, 0); +static SENSOR_DEVICE_ATTR_RW(temp1_crit, temp_crit, 0); +static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, 1); +static SENSOR_DEVICE_ATTR_RW(temp2_offset, temp_offset, 1); +static SENSOR_DEVICE_ATTR_RW(temp2_min, temp_min, 1); +static SENSOR_DEVICE_ATTR_RW(temp2_max, temp_max, 1); +static SENSOR_DEVICE_ATTR_RW(temp2_crit, temp_crit, 1); +static SENSOR_DEVICE_ATTR_RO(temp3_input, temp, 2); +static SENSOR_DEVICE_ATTR_RW(temp3_offset, temp_offset, 2); +static SENSOR_DEVICE_ATTR_RW(temp3_min, temp_min, 2); +static SENSOR_DEVICE_ATTR_RW(temp3_max, temp_max, 2); +static SENSOR_DEVICE_ATTR_RW(temp3_crit, temp_crit, 2); /* Alarms */ static ssize_t alarms_show(struct device *dev, struct device_attribute *attr, @@ -838,29 +831,29 @@ static ssize_t alarms_show(struct device *dev, struct device_attribute *attr, static DEVICE_ATTR_RO(alarms); -static ssize_t show_alarm(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t alarm_show(struct device *dev, struct device_attribute *attr, + char *buf) { int bitnr = to_sensor_dev_attr(attr)->index; struct adm1031_data *data = adm1031_update_device(dev); return sprintf(buf, "%d\n", (data->alarm >> bitnr) & 1); } -static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 0); -static SENSOR_DEVICE_ATTR(fan1_fault, S_IRUGO, show_alarm, NULL, 1); -static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 2); -static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, show_alarm, NULL, 3); -static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, show_alarm, NULL, 4); -static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 5); -static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 6); -static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL, 7); -static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 8); -static SENSOR_DEVICE_ATTR(fan2_fault, S_IRUGO, show_alarm, NULL, 9); -static SENSOR_DEVICE_ATTR(temp3_max_alarm, S_IRUGO, show_alarm, NULL, 10); -static SENSOR_DEVICE_ATTR(temp3_min_alarm, S_IRUGO, show_alarm, NULL, 11); -static SENSOR_DEVICE_ATTR(temp3_crit_alarm, S_IRUGO, show_alarm, NULL, 12); -static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 13); -static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 14); +static SENSOR_DEVICE_ATTR_RO(fan1_alarm, alarm, 0); +static SENSOR_DEVICE_ATTR_RO(fan1_fault, alarm, 1); +static SENSOR_DEVICE_ATTR_RO(temp2_max_alarm, alarm, 2); +static SENSOR_DEVICE_ATTR_RO(temp2_min_alarm, alarm, 3); +static SENSOR_DEVICE_ATTR_RO(temp2_crit_alarm, alarm, 4); +static SENSOR_DEVICE_ATTR_RO(temp2_fault, alarm, 5); +static SENSOR_DEVICE_ATTR_RO(temp1_max_alarm, alarm, 6); +static SENSOR_DEVICE_ATTR_RO(temp1_min_alarm, alarm, 7); +static SENSOR_DEVICE_ATTR_RO(fan2_alarm, alarm, 8); +static SENSOR_DEVICE_ATTR_RO(fan2_fault, alarm, 9); +static SENSOR_DEVICE_ATTR_RO(temp3_max_alarm, alarm, 10); +static SENSOR_DEVICE_ATTR_RO(temp3_min_alarm, alarm, 11); +static SENSOR_DEVICE_ATTR_RO(temp3_crit_alarm, alarm, 12); +static SENSOR_DEVICE_ATTR_RO(temp3_fault, alarm, 13); +static SENSOR_DEVICE_ATTR_RO(temp1_crit_alarm, alarm, 14); /* Update Interval */ static const unsigned int update_intervals[] = { From f6c93aeb0aad925fed1322f92af90501c5b008c6 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 21 Jan 2019 20:47:57 -0800 Subject: [PATCH 062/125] hwmon: (lm87) Use permission specific SENSOR[_DEVICE]_ATTR variants Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code, to improve readbility, and to reduce the chance of inconsistencies. Also replace any remaining S_ in the driver with octal values. The conversion was done automatically with coccinelle. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches/. This patch does not introduce functional changes. It was verified by compiling the old and new files and comparing text and data sizes. Signed-off-by: Guenter Roeck --- drivers/hwmon/lm87.c | 163 +++++++++++++++++++++++-------------------- 1 file changed, 86 insertions(+), 77 deletions(-) diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c index b48d30760388..644e61eae574 100644 --- a/drivers/hwmon/lm87.c +++ b/drivers/hwmon/lm87.c @@ -276,8 +276,8 @@ static struct lm87_data *lm87_update_device(struct device *dev) * Sysfs stuff */ -static ssize_t show_in_input(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t in_input_show(struct device *dev, + struct device_attribute *attr, char *buf) { struct lm87_data *data = lm87_update_device(dev); int nr = to_sensor_dev_attr(attr)->index; @@ -286,8 +286,8 @@ static ssize_t show_in_input(struct device *dev, struct device_attribute *attr, data->in_scale[nr])); } -static ssize_t show_in_min(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t in_min_show(struct device *dev, struct device_attribute *attr, + char *buf) { struct lm87_data *data = lm87_update_device(dev); int nr = to_sensor_dev_attr(attr)->index; @@ -296,8 +296,8 @@ static ssize_t show_in_min(struct device *dev, data->in_scale[nr])); } -static ssize_t show_in_max(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t in_max_show(struct device *dev, struct device_attribute *attr, + char *buf) { struct lm87_data *data = lm87_update_device(dev); int nr = to_sensor_dev_attr(attr)->index; @@ -306,8 +306,8 @@ static ssize_t show_in_max(struct device *dev, data->in_scale[nr])); } -static ssize_t set_in_min(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t in_min_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { struct i2c_client *client = dev_get_drvdata(dev); struct lm87_data *data = i2c_get_clientdata(client); @@ -327,8 +327,8 @@ static ssize_t set_in_min(struct device *dev, struct device_attribute *attr, return count; } -static ssize_t set_in_max(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t in_max_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { struct i2c_client *client = dev_get_drvdata(dev); struct lm87_data *data = i2c_get_clientdata(client); @@ -348,23 +348,32 @@ static ssize_t set_in_max(struct device *dev, struct device_attribute *attr, return count; } -#define set_in(offset) \ -static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \ - show_in_input, NULL, offset); \ -static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ - show_in_min, set_in_min, offset); \ -static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ - show_in_max, set_in_max, offset) -set_in(0); -set_in(1); -set_in(2); -set_in(3); -set_in(4); -set_in(5); -set_in(6); -set_in(7); +static SENSOR_DEVICE_ATTR_RO(in0_input, in_input, 0); +static SENSOR_DEVICE_ATTR_RW(in0_min, in_min, 0); +static SENSOR_DEVICE_ATTR_RW(in0_max, in_max, 0); +static SENSOR_DEVICE_ATTR_RO(in1_input, in_input, 1); +static SENSOR_DEVICE_ATTR_RW(in1_min, in_min, 1); +static SENSOR_DEVICE_ATTR_RW(in1_max, in_max, 1); +static SENSOR_DEVICE_ATTR_RO(in2_input, in_input, 2); +static SENSOR_DEVICE_ATTR_RW(in2_min, in_min, 2); +static SENSOR_DEVICE_ATTR_RW(in2_max, in_max, 2); +static SENSOR_DEVICE_ATTR_RO(in3_input, in_input, 3); +static SENSOR_DEVICE_ATTR_RW(in3_min, in_min, 3); +static SENSOR_DEVICE_ATTR_RW(in3_max, in_max, 3); +static SENSOR_DEVICE_ATTR_RO(in4_input, in_input, 4); +static SENSOR_DEVICE_ATTR_RW(in4_min, in_min, 4); +static SENSOR_DEVICE_ATTR_RW(in4_max, in_max, 4); +static SENSOR_DEVICE_ATTR_RO(in5_input, in_input, 5); +static SENSOR_DEVICE_ATTR_RW(in5_min, in_min, 5); +static SENSOR_DEVICE_ATTR_RW(in5_max, in_max, 5); +static SENSOR_DEVICE_ATTR_RO(in6_input, in_input, 6); +static SENSOR_DEVICE_ATTR_RW(in6_min, in_min, 6); +static SENSOR_DEVICE_ATTR_RW(in6_max, in_max, 6); +static SENSOR_DEVICE_ATTR_RO(in7_input, in_input, 7); +static SENSOR_DEVICE_ATTR_RW(in7_min, in_min, 7); +static SENSOR_DEVICE_ATTR_RW(in7_max, in_max, 7); -static ssize_t show_temp_input(struct device *dev, +static ssize_t temp_input_show(struct device *dev, struct device_attribute *attr, char *buf) { struct lm87_data *data = lm87_update_device(dev); @@ -373,7 +382,7 @@ static ssize_t show_temp_input(struct device *dev, return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr])); } -static ssize_t show_temp_low(struct device *dev, +static ssize_t temp_low_show(struct device *dev, struct device_attribute *attr, char *buf) { struct lm87_data *data = lm87_update_device(dev); @@ -383,7 +392,7 @@ static ssize_t show_temp_low(struct device *dev, TEMP_FROM_REG(data->temp_low[nr])); } -static ssize_t show_temp_high(struct device *dev, +static ssize_t temp_high_show(struct device *dev, struct device_attribute *attr, char *buf) { struct lm87_data *data = lm87_update_device(dev); @@ -393,8 +402,9 @@ static ssize_t show_temp_high(struct device *dev, TEMP_FROM_REG(data->temp_high[nr])); } -static ssize_t set_temp_low(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t temp_low_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) { struct i2c_client *client = dev_get_drvdata(dev); struct lm87_data *data = i2c_get_clientdata(client); @@ -413,8 +423,9 @@ static ssize_t set_temp_low(struct device *dev, struct device_attribute *attr, return count; } -static ssize_t set_temp_high(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t temp_high_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) { struct i2c_client *client = dev_get_drvdata(dev); struct lm87_data *data = i2c_get_clientdata(client); @@ -433,16 +444,15 @@ static ssize_t set_temp_high(struct device *dev, struct device_attribute *attr, return count; } -#define set_temp(offset) \ -static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \ - show_temp_input, NULL, offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \ - show_temp_high, set_temp_high, offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \ - show_temp_low, set_temp_low, offset - 1) -set_temp(1); -set_temp(2); -set_temp(3); +static SENSOR_DEVICE_ATTR_RO(temp1_input, temp_input, 0); +static SENSOR_DEVICE_ATTR_RW(temp1_min, temp_low, 0); +static SENSOR_DEVICE_ATTR_RW(temp1_max, temp_high, 0); +static SENSOR_DEVICE_ATTR_RO(temp2_input, temp_input, 1); +static SENSOR_DEVICE_ATTR_RW(temp2_min, temp_low, 1); +static SENSOR_DEVICE_ATTR_RW(temp2_max, temp_high, 1); +static SENSOR_DEVICE_ATTR_RO(temp3_input, temp_input, 2); +static SENSOR_DEVICE_ATTR_RW(temp3_min, temp_low, 2); +static SENSOR_DEVICE_ATTR_RW(temp3_max, temp_high, 2); static ssize_t temp1_crit_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -460,9 +470,9 @@ static ssize_t temp2_crit_show(struct device *dev, static DEVICE_ATTR_RO(temp1_crit); static DEVICE_ATTR_RO(temp2_crit); -static DEVICE_ATTR(temp3_crit, S_IRUGO, temp2_crit_show, NULL); +static DEVICE_ATTR(temp3_crit, 0444, temp2_crit_show, NULL); -static ssize_t show_fan_input(struct device *dev, +static ssize_t fan_input_show(struct device *dev, struct device_attribute *attr, char *buf) { struct lm87_data *data = lm87_update_device(dev); @@ -472,8 +482,8 @@ static ssize_t show_fan_input(struct device *dev, FAN_DIV_FROM_REG(data->fan_div[nr]))); } -static ssize_t show_fan_min(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t fan_min_show(struct device *dev, struct device_attribute *attr, + char *buf) { struct lm87_data *data = lm87_update_device(dev); int nr = to_sensor_dev_attr(attr)->index; @@ -482,8 +492,8 @@ static ssize_t show_fan_min(struct device *dev, FAN_DIV_FROM_REG(data->fan_div[nr]))); } -static ssize_t show_fan_div(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t fan_div_show(struct device *dev, struct device_attribute *attr, + char *buf) { struct lm87_data *data = lm87_update_device(dev); int nr = to_sensor_dev_attr(attr)->index; @@ -492,8 +502,9 @@ static ssize_t show_fan_div(struct device *dev, FAN_DIV_FROM_REG(data->fan_div[nr])); } -static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t fan_min_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) { struct i2c_client *client = dev_get_drvdata(dev); struct lm87_data *data = i2c_get_clientdata(client); @@ -519,8 +530,9 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr, * of least surprise; the user doesn't expect the fan minimum to change just * because the divider changed. */ -static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t fan_div_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) { struct i2c_client *client = dev_get_drvdata(dev); struct lm87_data *data = i2c_get_clientdata(client); @@ -575,15 +587,12 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr, return count; } -#define set_fan(offset) \ -static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \ - show_fan_input, NULL, offset - 1); \ -static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ - show_fan_min, set_fan_min, offset - 1); \ -static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \ - show_fan_div, set_fan_div, offset - 1) -set_fan(1); -set_fan(2); +static SENSOR_DEVICE_ATTR_RO(fan1_input, fan_input, 0); +static SENSOR_DEVICE_ATTR_RW(fan1_min, fan_min, 0); +static SENSOR_DEVICE_ATTR_RW(fan1_div, fan_div, 0); +static SENSOR_DEVICE_ATTR_RO(fan2_input, fan_input, 1); +static SENSOR_DEVICE_ATTR_RW(fan2_min, fan_min, 1); +static SENSOR_DEVICE_ATTR_RW(fan2_div, fan_div, 1); static ssize_t alarms_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -653,28 +662,28 @@ static ssize_t aout_output_store(struct device *dev, } static DEVICE_ATTR_RW(aout_output); -static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, +static ssize_t alarm_show(struct device *dev, struct device_attribute *attr, char *buf) { struct lm87_data *data = lm87_update_device(dev); int bitnr = to_sensor_dev_attr(attr)->index; return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1); } -static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0); -static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1); -static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2); -static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3); -static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8); -static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 9); -static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 6); -static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 7); -static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4); -static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5); -static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 5); -static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6); -static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7); -static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 14); -static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 15); +static SENSOR_DEVICE_ATTR_RO(in0_alarm, alarm, 0); +static SENSOR_DEVICE_ATTR_RO(in1_alarm, alarm, 1); +static SENSOR_DEVICE_ATTR_RO(in2_alarm, alarm, 2); +static SENSOR_DEVICE_ATTR_RO(in3_alarm, alarm, 3); +static SENSOR_DEVICE_ATTR_RO(in4_alarm, alarm, 8); +static SENSOR_DEVICE_ATTR_RO(in5_alarm, alarm, 9); +static SENSOR_DEVICE_ATTR_RO(in6_alarm, alarm, 6); +static SENSOR_DEVICE_ATTR_RO(in7_alarm, alarm, 7); +static SENSOR_DEVICE_ATTR_RO(temp1_alarm, alarm, 4); +static SENSOR_DEVICE_ATTR_RO(temp2_alarm, alarm, 5); +static SENSOR_DEVICE_ATTR_RO(temp3_alarm, alarm, 5); +static SENSOR_DEVICE_ATTR_RO(fan1_alarm, alarm, 6); +static SENSOR_DEVICE_ATTR_RO(fan2_alarm, alarm, 7); +static SENSOR_DEVICE_ATTR_RO(temp2_fault, alarm, 14); +static SENSOR_DEVICE_ATTR_RO(temp3_fault, alarm, 15); /* * Real code From e7655cfd39d821fc5cfce3f335173cce98f4ebb7 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 22 Jan 2019 10:07:16 -0800 Subject: [PATCH 063/125] hwmon: (lm78) Use permission specific SENSOR[_DEVICE]_ATTR variants Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code, to improve readbility, and to reduce the chance of inconsistencies. Also replace any remaining S_ in the driver with octal values. The conversion was done automatically with coccinelle. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches/. This patch does not introduce functional changes. It was verified by compiling the old and new files and comparing text and data sizes. Signed-off-by: Guenter Roeck --- drivers/hwmon/lm78.c | 114 +++++++++++++++++++++---------------------- 1 file changed, 56 insertions(+), 58 deletions(-) diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c index 0cb7ff613b80..eb95947673de 100644 --- a/drivers/hwmon/lm78.c +++ b/drivers/hwmon/lm78.c @@ -73,7 +73,6 @@ enum chips { lm78, lm79 }; #define LM78_REG_CHIPID 0x49 #define LM78_REG_I2C_ADDR 0x48 - /* * Conversions. Rounding and limit checking is only done on the TO_REG * variants. @@ -147,15 +146,13 @@ struct lm78_data { u16 alarms; /* Register encoding, combined */ }; - static int lm78_read_value(struct lm78_data *data, u8 reg); static int lm78_write_value(struct lm78_data *data, u8 reg, u8 value); static struct lm78_data *lm78_update_device(struct device *dev); static void lm78_init_device(struct lm78_data *data); - /* 7 Voltages */ -static ssize_t show_in(struct device *dev, struct device_attribute *da, +static ssize_t in_show(struct device *dev, struct device_attribute *da, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); @@ -163,7 +160,7 @@ static ssize_t show_in(struct device *dev, struct device_attribute *da, return sprintf(buf, "%d\n", IN_FROM_REG(data->in[attr->index])); } -static ssize_t show_in_min(struct device *dev, struct device_attribute *da, +static ssize_t in_min_show(struct device *dev, struct device_attribute *da, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); @@ -171,7 +168,7 @@ static ssize_t show_in_min(struct device *dev, struct device_attribute *da, return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[attr->index])); } -static ssize_t show_in_max(struct device *dev, struct device_attribute *da, +static ssize_t in_max_show(struct device *dev, struct device_attribute *da, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); @@ -179,8 +176,8 @@ static ssize_t show_in_max(struct device *dev, struct device_attribute *da, return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[attr->index])); } -static ssize_t set_in_min(struct device *dev, struct device_attribute *da, - const char *buf, size_t count) +static ssize_t in_min_store(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); struct lm78_data *data = dev_get_drvdata(dev); @@ -199,8 +196,8 @@ static ssize_t set_in_min(struct device *dev, struct device_attribute *da, return count; } -static ssize_t set_in_max(struct device *dev, struct device_attribute *da, - const char *buf, size_t count) +static ssize_t in_max_store(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); struct lm78_data *data = dev_get_drvdata(dev); @@ -219,21 +216,27 @@ static ssize_t set_in_max(struct device *dev, struct device_attribute *da, return count; } -#define show_in_offset(offset) \ -static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \ - show_in, NULL, offset); \ -static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ - show_in_min, set_in_min, offset); \ -static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ - show_in_max, set_in_max, offset); - -show_in_offset(0); -show_in_offset(1); -show_in_offset(2); -show_in_offset(3); -show_in_offset(4); -show_in_offset(5); -show_in_offset(6); +static SENSOR_DEVICE_ATTR_RO(in0_input, in, 0); +static SENSOR_DEVICE_ATTR_RW(in0_min, in_min, 0); +static SENSOR_DEVICE_ATTR_RW(in0_max, in_max, 0); +static SENSOR_DEVICE_ATTR_RO(in1_input, in, 1); +static SENSOR_DEVICE_ATTR_RW(in1_min, in_min, 1); +static SENSOR_DEVICE_ATTR_RW(in1_max, in_max, 1); +static SENSOR_DEVICE_ATTR_RO(in2_input, in, 2); +static SENSOR_DEVICE_ATTR_RW(in2_min, in_min, 2); +static SENSOR_DEVICE_ATTR_RW(in2_max, in_max, 2); +static SENSOR_DEVICE_ATTR_RO(in3_input, in, 3); +static SENSOR_DEVICE_ATTR_RW(in3_min, in_min, 3); +static SENSOR_DEVICE_ATTR_RW(in3_max, in_max, 3); +static SENSOR_DEVICE_ATTR_RO(in4_input, in, 4); +static SENSOR_DEVICE_ATTR_RW(in4_min, in_min, 4); +static SENSOR_DEVICE_ATTR_RW(in4_max, in_max, 4); +static SENSOR_DEVICE_ATTR_RO(in5_input, in, 5); +static SENSOR_DEVICE_ATTR_RW(in5_min, in_min, 5); +static SENSOR_DEVICE_ATTR_RW(in5_max, in_max, 5); +static SENSOR_DEVICE_ATTR_RO(in6_input, in, 6); +static SENSOR_DEVICE_ATTR_RW(in6_min, in_min, 6); +static SENSOR_DEVICE_ATTR_RW(in6_max, in_max, 6); /* Temperature */ static ssize_t temp1_input_show(struct device *dev, @@ -300,7 +303,7 @@ static DEVICE_ATTR_RW(temp1_max); static DEVICE_ATTR_RW(temp1_max_hyst); /* 3 Fans */ -static ssize_t show_fan(struct device *dev, struct device_attribute *da, +static ssize_t fan_show(struct device *dev, struct device_attribute *da, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); @@ -310,7 +313,7 @@ static ssize_t show_fan(struct device *dev, struct device_attribute *da, DIV_FROM_REG(data->fan_div[nr]))); } -static ssize_t show_fan_min(struct device *dev, struct device_attribute *da, +static ssize_t fan_min_show(struct device *dev, struct device_attribute *da, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); @@ -320,8 +323,8 @@ static ssize_t show_fan_min(struct device *dev, struct device_attribute *da, DIV_FROM_REG(data->fan_div[nr]))); } -static ssize_t set_fan_min(struct device *dev, struct device_attribute *da, - const char *buf, size_t count) +static ssize_t fan_min_store(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); struct lm78_data *data = dev_get_drvdata(dev); @@ -340,7 +343,7 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute *da, return count; } -static ssize_t show_fan_div(struct device *dev, struct device_attribute *da, +static ssize_t fan_div_show(struct device *dev, struct device_attribute *da, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); @@ -354,8 +357,8 @@ static ssize_t show_fan_div(struct device *dev, struct device_attribute *da, * least surprise; the user doesn't expect the fan minimum to change just * because the divisor changed. */ -static ssize_t set_fan_div(struct device *dev, struct device_attribute *da, - const char *buf, size_t count) +static ssize_t fan_div_store(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); struct lm78_data *data = dev_get_drvdata(dev); @@ -413,22 +416,17 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *da, return count; } -#define show_fan_offset(offset) \ -static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \ - show_fan, NULL, offset - 1); \ -static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ - show_fan_min, set_fan_min, offset - 1); - -show_fan_offset(1); -show_fan_offset(2); -show_fan_offset(3); +static SENSOR_DEVICE_ATTR_RO(fan1_input, fan, 0); +static SENSOR_DEVICE_ATTR_RW(fan1_min, fan_min, 0); +static SENSOR_DEVICE_ATTR_RO(fan2_input, fan, 1); +static SENSOR_DEVICE_ATTR_RW(fan2_min, fan_min, 1); +static SENSOR_DEVICE_ATTR_RO(fan3_input, fan, 2); +static SENSOR_DEVICE_ATTR_RW(fan3_min, fan_min, 2); /* Fan 3 divisor is locked in H/W */ -static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR, - show_fan_div, set_fan_div, 0); -static SENSOR_DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR, - show_fan_div, set_fan_div, 1); -static SENSOR_DEVICE_ATTR(fan3_div, S_IRUGO, show_fan_div, NULL, 2); +static SENSOR_DEVICE_ATTR_RW(fan1_div, fan_div, 0); +static SENSOR_DEVICE_ATTR_RW(fan2_div, fan_div, 1); +static SENSOR_DEVICE_ATTR_RO(fan3_div, fan_div, 2); /* VID */ static ssize_t cpu0_vid_show(struct device *dev, struct device_attribute *da, @@ -448,24 +446,24 @@ static ssize_t alarms_show(struct device *dev, struct device_attribute *da, } static DEVICE_ATTR_RO(alarms); -static ssize_t show_alarm(struct device *dev, struct device_attribute *da, +static ssize_t alarm_show(struct device *dev, struct device_attribute *da, char *buf) { struct lm78_data *data = lm78_update_device(dev); int nr = to_sensor_dev_attr(da)->index; return sprintf(buf, "%u\n", (data->alarms >> nr) & 1); } -static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0); -static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1); -static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2); -static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3); -static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8); -static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 9); -static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 10); -static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6); -static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7); -static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 11); -static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4); +static SENSOR_DEVICE_ATTR_RO(in0_alarm, alarm, 0); +static SENSOR_DEVICE_ATTR_RO(in1_alarm, alarm, 1); +static SENSOR_DEVICE_ATTR_RO(in2_alarm, alarm, 2); +static SENSOR_DEVICE_ATTR_RO(in3_alarm, alarm, 3); +static SENSOR_DEVICE_ATTR_RO(in4_alarm, alarm, 8); +static SENSOR_DEVICE_ATTR_RO(in5_alarm, alarm, 9); +static SENSOR_DEVICE_ATTR_RO(in6_alarm, alarm, 10); +static SENSOR_DEVICE_ATTR_RO(fan1_alarm, alarm, 6); +static SENSOR_DEVICE_ATTR_RO(fan2_alarm, alarm, 7); +static SENSOR_DEVICE_ATTR_RO(fan3_alarm, alarm, 11); +static SENSOR_DEVICE_ATTR_RO(temp1_alarm, alarm, 4); static struct attribute *lm78_attrs[] = { &sensor_dev_attr_in0_input.dev_attr.attr, From 7bc85e492158c157bf7d3c8970fa881dff6052ae Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 22 Jan 2019 10:40:33 -0800 Subject: [PATCH 064/125] hwmon: (lm85) Use permission specific SENSOR[_DEVICE]_ATTR variants Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code, to improve readbility, and to reduce the chance of inconsistencies. Also replace any remaining S_ in the driver with octal values. The conversion was done automatically with coccinelle. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches/. This patch does not introduce functional changes. It was verified by compiling the old and new files and comparing text and data sizes. Signed-off-by: Guenter Roeck --- drivers/hwmon/lm85.c | 340 ++++++++++++++++++++++--------------------- 1 file changed, 174 insertions(+), 166 deletions(-) diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index 235bba054d47..80db367b4c54 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -165,7 +165,6 @@ static inline u16 FAN_TO_REG(unsigned long val) #define PWM_TO_REG(val) clamp_val(val, 0, 255) #define PWM_FROM_REG(val) (val) - /* * ZONEs have the following parameters: * Limit (low) temp, 1. degC @@ -563,24 +562,25 @@ static struct lm85_data *lm85_update_device(struct device *dev) } /* 4 Fans */ -static ssize_t show_fan(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t fan_show(struct device *dev, struct device_attribute *attr, + char *buf) { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr])); } -static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t fan_min_show(struct device *dev, struct device_attribute *attr, + char *buf) { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr])); } -static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t fan_min_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = dev_get_drvdata(dev); @@ -599,16 +599,14 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr, return count; } -#define show_fan_offset(offset) \ -static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \ - show_fan, NULL, offset - 1); \ -static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ - show_fan_min, set_fan_min, offset - 1) - -show_fan_offset(1); -show_fan_offset(2); -show_fan_offset(3); -show_fan_offset(4); +static SENSOR_DEVICE_ATTR_RO(fan1_input, fan, 0); +static SENSOR_DEVICE_ATTR_RW(fan1_min, fan_min, 0); +static SENSOR_DEVICE_ATTR_RO(fan2_input, fan, 1); +static SENSOR_DEVICE_ATTR_RW(fan2_min, fan_min, 1); +static SENSOR_DEVICE_ATTR_RO(fan3_input, fan, 2); +static SENSOR_DEVICE_ATTR_RW(fan3_min, fan_min, 2); +static SENSOR_DEVICE_ATTR_RO(fan4_input, fan, 3); +static SENSOR_DEVICE_ATTR_RW(fan4_min, fan_min, 3); /* vid, vrm, alarms */ @@ -667,44 +665,44 @@ static ssize_t alarms_show(struct device *dev, struct device_attribute *attr, static DEVICE_ATTR_RO(alarms); -static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t alarm_show(struct device *dev, struct device_attribute *attr, + char *buf) { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); return sprintf(buf, "%u\n", (data->alarms >> nr) & 1); } -static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0); -static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1); -static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2); -static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3); -static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8); -static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 18); -static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 16); -static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 17); -static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4); -static SENSOR_DEVICE_ATTR(temp1_fault, S_IRUGO, show_alarm, NULL, 14); -static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5); -static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 6); -static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 15); -static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 10); -static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 11); -static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 12); -static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, 13); +static SENSOR_DEVICE_ATTR_RO(in0_alarm, alarm, 0); +static SENSOR_DEVICE_ATTR_RO(in1_alarm, alarm, 1); +static SENSOR_DEVICE_ATTR_RO(in2_alarm, alarm, 2); +static SENSOR_DEVICE_ATTR_RO(in3_alarm, alarm, 3); +static SENSOR_DEVICE_ATTR_RO(in4_alarm, alarm, 8); +static SENSOR_DEVICE_ATTR_RO(in5_alarm, alarm, 18); +static SENSOR_DEVICE_ATTR_RO(in6_alarm, alarm, 16); +static SENSOR_DEVICE_ATTR_RO(in7_alarm, alarm, 17); +static SENSOR_DEVICE_ATTR_RO(temp1_alarm, alarm, 4); +static SENSOR_DEVICE_ATTR_RO(temp1_fault, alarm, 14); +static SENSOR_DEVICE_ATTR_RO(temp2_alarm, alarm, 5); +static SENSOR_DEVICE_ATTR_RO(temp3_alarm, alarm, 6); +static SENSOR_DEVICE_ATTR_RO(temp3_fault, alarm, 15); +static SENSOR_DEVICE_ATTR_RO(fan1_alarm, alarm, 10); +static SENSOR_DEVICE_ATTR_RO(fan2_alarm, alarm, 11); +static SENSOR_DEVICE_ATTR_RO(fan3_alarm, alarm, 12); +static SENSOR_DEVICE_ATTR_RO(fan4_alarm, alarm, 13); /* pwm */ -static ssize_t show_pwm(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t pwm_show(struct device *dev, struct device_attribute *attr, + char *buf) { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm[nr])); } -static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t pwm_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = dev_get_drvdata(dev); @@ -723,8 +721,8 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, return count; } -static ssize_t show_pwm_enable(struct device *dev, struct device_attribute - *attr, char *buf) +static ssize_t pwm_enable_show(struct device *dev, + struct device_attribute *attr, char *buf) { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); @@ -745,8 +743,9 @@ static ssize_t show_pwm_enable(struct device *dev, struct device_attribute return sprintf(buf, "%d\n", enable); } -static ssize_t set_pwm_enable(struct device *dev, struct device_attribute - *attr, const char *buf, size_t count) +static ssize_t pwm_enable_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = dev_get_drvdata(dev); @@ -788,8 +787,8 @@ static ssize_t set_pwm_enable(struct device *dev, struct device_attribute return count; } -static ssize_t show_pwm_freq(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t pwm_freq_show(struct device *dev, + struct device_attribute *attr, char *buf) { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); @@ -804,8 +803,9 @@ static ssize_t show_pwm_freq(struct device *dev, return sprintf(buf, "%d\n", freq); } -static ssize_t set_pwm_freq(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) +static ssize_t pwm_freq_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = dev_get_drvdata(dev); @@ -841,22 +841,20 @@ static ssize_t set_pwm_freq(struct device *dev, return count; } -#define show_pwm_reg(offset) \ -static SENSOR_DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \ - show_pwm, set_pwm, offset - 1); \ -static SENSOR_DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \ - show_pwm_enable, set_pwm_enable, offset - 1); \ -static SENSOR_DEVICE_ATTR(pwm##offset##_freq, S_IRUGO | S_IWUSR, \ - show_pwm_freq, set_pwm_freq, offset - 1) - -show_pwm_reg(1); -show_pwm_reg(2); -show_pwm_reg(3); +static SENSOR_DEVICE_ATTR_RW(pwm1, pwm, 0); +static SENSOR_DEVICE_ATTR_RW(pwm1_enable, pwm_enable, 0); +static SENSOR_DEVICE_ATTR_RW(pwm1_freq, pwm_freq, 0); +static SENSOR_DEVICE_ATTR_RW(pwm2, pwm, 1); +static SENSOR_DEVICE_ATTR_RW(pwm2_enable, pwm_enable, 1); +static SENSOR_DEVICE_ATTR_RW(pwm2_freq, pwm_freq, 1); +static SENSOR_DEVICE_ATTR_RW(pwm3, pwm, 2); +static SENSOR_DEVICE_ATTR_RW(pwm3_enable, pwm_enable, 2); +static SENSOR_DEVICE_ATTR_RW(pwm3_freq, pwm_freq, 2); /* Voltages */ -static ssize_t show_in(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t in_show(struct device *dev, struct device_attribute *attr, + char *buf) { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); @@ -864,16 +862,16 @@ static ssize_t show_in(struct device *dev, struct device_attribute *attr, data->in_ext[nr])); } -static ssize_t show_in_min(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t in_min_show(struct device *dev, struct device_attribute *attr, + char *buf) { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); return sprintf(buf, "%d\n", INS_FROM_REG(nr, data->in_min[nr])); } -static ssize_t set_in_min(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t in_min_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = dev_get_drvdata(dev); @@ -892,16 +890,16 @@ static ssize_t set_in_min(struct device *dev, struct device_attribute *attr, return count; } -static ssize_t show_in_max(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t in_max_show(struct device *dev, struct device_attribute *attr, + char *buf) { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); return sprintf(buf, "%d\n", INS_FROM_REG(nr, data->in_max[nr])); } -static ssize_t set_in_max(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t in_max_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = dev_get_drvdata(dev); @@ -920,27 +918,35 @@ static ssize_t set_in_max(struct device *dev, struct device_attribute *attr, return count; } -#define show_in_reg(offset) \ -static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \ - show_in, NULL, offset); \ -static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ - show_in_min, set_in_min, offset); \ -static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ - show_in_max, set_in_max, offset) - -show_in_reg(0); -show_in_reg(1); -show_in_reg(2); -show_in_reg(3); -show_in_reg(4); -show_in_reg(5); -show_in_reg(6); -show_in_reg(7); +static SENSOR_DEVICE_ATTR_RO(in0_input, in, 0); +static SENSOR_DEVICE_ATTR_RW(in0_min, in_min, 0); +static SENSOR_DEVICE_ATTR_RW(in0_max, in_max, 0); +static SENSOR_DEVICE_ATTR_RO(in1_input, in, 1); +static SENSOR_DEVICE_ATTR_RW(in1_min, in_min, 1); +static SENSOR_DEVICE_ATTR_RW(in1_max, in_max, 1); +static SENSOR_DEVICE_ATTR_RO(in2_input, in, 2); +static SENSOR_DEVICE_ATTR_RW(in2_min, in_min, 2); +static SENSOR_DEVICE_ATTR_RW(in2_max, in_max, 2); +static SENSOR_DEVICE_ATTR_RO(in3_input, in, 3); +static SENSOR_DEVICE_ATTR_RW(in3_min, in_min, 3); +static SENSOR_DEVICE_ATTR_RW(in3_max, in_max, 3); +static SENSOR_DEVICE_ATTR_RO(in4_input, in, 4); +static SENSOR_DEVICE_ATTR_RW(in4_min, in_min, 4); +static SENSOR_DEVICE_ATTR_RW(in4_max, in_max, 4); +static SENSOR_DEVICE_ATTR_RO(in5_input, in, 5); +static SENSOR_DEVICE_ATTR_RW(in5_min, in_min, 5); +static SENSOR_DEVICE_ATTR_RW(in5_max, in_max, 5); +static SENSOR_DEVICE_ATTR_RO(in6_input, in, 6); +static SENSOR_DEVICE_ATTR_RW(in6_min, in_min, 6); +static SENSOR_DEVICE_ATTR_RW(in6_max, in_max, 6); +static SENSOR_DEVICE_ATTR_RO(in7_input, in, 7); +static SENSOR_DEVICE_ATTR_RW(in7_min, in_min, 7); +static SENSOR_DEVICE_ATTR_RW(in7_max, in_max, 7); /* Temps */ -static ssize_t show_temp(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t temp_show(struct device *dev, struct device_attribute *attr, + char *buf) { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); @@ -948,16 +954,17 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *attr, data->temp_ext[nr])); } -static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t temp_min_show(struct device *dev, + struct device_attribute *attr, char *buf) { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[nr])); } -static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t temp_min_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = dev_get_drvdata(dev); @@ -979,16 +986,17 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, return count; } -static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t temp_max_show(struct device *dev, + struct device_attribute *attr, char *buf) { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[nr])); } -static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t temp_max_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = dev_get_drvdata(dev); @@ -1010,31 +1018,30 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, return count; } -#define show_temp_reg(offset) \ -static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \ - show_temp, NULL, offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \ - show_temp_min, set_temp_min, offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \ - show_temp_max, set_temp_max, offset - 1); - -show_temp_reg(1); -show_temp_reg(2); -show_temp_reg(3); - +static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, 0); +static SENSOR_DEVICE_ATTR_RW(temp1_min, temp_min, 0); +static SENSOR_DEVICE_ATTR_RW(temp1_max, temp_max, 0); +static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, 1); +static SENSOR_DEVICE_ATTR_RW(temp2_min, temp_min, 1); +static SENSOR_DEVICE_ATTR_RW(temp2_max, temp_max, 1); +static SENSOR_DEVICE_ATTR_RO(temp3_input, temp, 2); +static SENSOR_DEVICE_ATTR_RW(temp3_min, temp_min, 2); +static SENSOR_DEVICE_ATTR_RW(temp3_max, temp_max, 2); /* Automatic PWM control */ -static ssize_t show_pwm_auto_channels(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t pwm_auto_channels_show(struct device *dev, + struct device_attribute *attr, + char *buf) { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); return sprintf(buf, "%d\n", ZONE_FROM_REG(data->autofan[nr].config)); } -static ssize_t set_pwm_auto_channels(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) +static ssize_t pwm_auto_channels_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = dev_get_drvdata(dev); @@ -1055,16 +1062,17 @@ static ssize_t set_pwm_auto_channels(struct device *dev, return count; } -static ssize_t show_pwm_auto_pwm_min(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t pwm_auto_pwm_min_show(struct device *dev, + struct device_attribute *attr, char *buf) { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); return sprintf(buf, "%d\n", PWM_FROM_REG(data->autofan[nr].min_pwm)); } -static ssize_t set_pwm_auto_pwm_min(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) +static ssize_t pwm_auto_pwm_min_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = dev_get_drvdata(dev); @@ -1084,16 +1092,18 @@ static ssize_t set_pwm_auto_pwm_min(struct device *dev, return count; } -static ssize_t show_pwm_auto_pwm_minctl(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t pwm_auto_pwm_minctl_show(struct device *dev, + struct device_attribute *attr, + char *buf) { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); return sprintf(buf, "%d\n", data->autofan[nr].min_off); } -static ssize_t set_pwm_auto_pwm_minctl(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) +static ssize_t pwm_auto_pwm_minctl_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = dev_get_drvdata(dev); @@ -1117,25 +1127,21 @@ static ssize_t set_pwm_auto_pwm_minctl(struct device *dev, return count; } -#define pwm_auto(offset) \ -static SENSOR_DEVICE_ATTR(pwm##offset##_auto_channels, \ - S_IRUGO | S_IWUSR, show_pwm_auto_channels, \ - set_pwm_auto_channels, offset - 1); \ -static SENSOR_DEVICE_ATTR(pwm##offset##_auto_pwm_min, \ - S_IRUGO | S_IWUSR, show_pwm_auto_pwm_min, \ - set_pwm_auto_pwm_min, offset - 1); \ -static SENSOR_DEVICE_ATTR(pwm##offset##_auto_pwm_minctl, \ - S_IRUGO | S_IWUSR, show_pwm_auto_pwm_minctl, \ - set_pwm_auto_pwm_minctl, offset - 1) - -pwm_auto(1); -pwm_auto(2); -pwm_auto(3); +static SENSOR_DEVICE_ATTR_RW(pwm1_auto_channels, pwm_auto_channels, 0); +static SENSOR_DEVICE_ATTR_RW(pwm1_auto_pwm_min, pwm_auto_pwm_min, 0); +static SENSOR_DEVICE_ATTR_RW(pwm1_auto_pwm_minctl, pwm_auto_pwm_minctl, 0); +static SENSOR_DEVICE_ATTR_RW(pwm2_auto_channels, pwm_auto_channels, 1); +static SENSOR_DEVICE_ATTR_RW(pwm2_auto_pwm_min, pwm_auto_pwm_min, 1); +static SENSOR_DEVICE_ATTR_RW(pwm2_auto_pwm_minctl, pwm_auto_pwm_minctl, 1); +static SENSOR_DEVICE_ATTR_RW(pwm3_auto_channels, pwm_auto_channels, 2); +static SENSOR_DEVICE_ATTR_RW(pwm3_auto_pwm_min, pwm_auto_pwm_min, 2); +static SENSOR_DEVICE_ATTR_RW(pwm3_auto_pwm_minctl, pwm_auto_pwm_minctl, 2); /* Temperature settings for automatic PWM control */ -static ssize_t show_temp_auto_temp_off(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t temp_auto_temp_off_show(struct device *dev, + struct device_attribute *attr, + char *buf) { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); @@ -1143,8 +1149,9 @@ static ssize_t show_temp_auto_temp_off(struct device *dev, HYST_FROM_REG(data->zone[nr].hyst)); } -static ssize_t set_temp_auto_temp_off(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) +static ssize_t temp_auto_temp_off_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = dev_get_drvdata(dev); @@ -1172,16 +1179,18 @@ static ssize_t set_temp_auto_temp_off(struct device *dev, return count; } -static ssize_t show_temp_auto_temp_min(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t temp_auto_temp_min_show(struct device *dev, + struct device_attribute *attr, + char *buf) { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].limit)); } -static ssize_t set_temp_auto_temp_min(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) +static ssize_t temp_auto_temp_min_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = dev_get_drvdata(dev); @@ -1210,8 +1219,9 @@ static ssize_t set_temp_auto_temp_min(struct device *dev, return count; } -static ssize_t show_temp_auto_temp_max(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t temp_auto_temp_max_show(struct device *dev, + struct device_attribute *attr, + char *buf) { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); @@ -1219,8 +1229,9 @@ static ssize_t show_temp_auto_temp_max(struct device *dev, RANGE_FROM_REG(data->zone[nr].range)); } -static ssize_t set_temp_auto_temp_max(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) +static ssize_t temp_auto_temp_max_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = dev_get_drvdata(dev); @@ -1245,16 +1256,18 @@ static ssize_t set_temp_auto_temp_max(struct device *dev, return count; } -static ssize_t show_temp_auto_temp_crit(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t temp_auto_temp_crit_show(struct device *dev, + struct device_attribute *attr, + char *buf) { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].critical)); } -static ssize_t set_temp_auto_temp_crit(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) +static ssize_t temp_auto_temp_crit_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = dev_get_drvdata(dev); @@ -1274,23 +1287,18 @@ static ssize_t set_temp_auto_temp_crit(struct device *dev, return count; } -#define temp_auto(offset) \ -static SENSOR_DEVICE_ATTR(temp##offset##_auto_temp_off, \ - S_IRUGO | S_IWUSR, show_temp_auto_temp_off, \ - set_temp_auto_temp_off, offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_auto_temp_min, \ - S_IRUGO | S_IWUSR, show_temp_auto_temp_min, \ - set_temp_auto_temp_min, offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_auto_temp_max, \ - S_IRUGO | S_IWUSR, show_temp_auto_temp_max, \ - set_temp_auto_temp_max, offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_auto_temp_crit, \ - S_IRUGO | S_IWUSR, show_temp_auto_temp_crit, \ - set_temp_auto_temp_crit, offset - 1); - -temp_auto(1); -temp_auto(2); -temp_auto(3); +static SENSOR_DEVICE_ATTR_RW(temp1_auto_temp_off, temp_auto_temp_off, 0); +static SENSOR_DEVICE_ATTR_RW(temp1_auto_temp_min, temp_auto_temp_min, 0); +static SENSOR_DEVICE_ATTR_RW(temp1_auto_temp_max, temp_auto_temp_max, 0); +static SENSOR_DEVICE_ATTR_RW(temp1_auto_temp_crit, temp_auto_temp_crit, 0); +static SENSOR_DEVICE_ATTR_RW(temp2_auto_temp_off, temp_auto_temp_off, 1); +static SENSOR_DEVICE_ATTR_RW(temp2_auto_temp_min, temp_auto_temp_min, 1); +static SENSOR_DEVICE_ATTR_RW(temp2_auto_temp_max, temp_auto_temp_max, 1); +static SENSOR_DEVICE_ATTR_RW(temp2_auto_temp_crit, temp_auto_temp_crit, 1); +static SENSOR_DEVICE_ATTR_RW(temp3_auto_temp_off, temp_auto_temp_off, 2); +static SENSOR_DEVICE_ATTR_RW(temp3_auto_temp_min, temp_auto_temp_min, 2); +static SENSOR_DEVICE_ATTR_RW(temp3_auto_temp_max, temp_auto_temp_max, 2); +static SENSOR_DEVICE_ATTR_RW(temp3_auto_temp_crit, temp_auto_temp_crit, 2); static struct attribute *lm85_attributes[] = { &sensor_dev_attr_fan1_input.dev_attr.attr, From 9d5bc0906cc1dc816f5b26e179b6cf764a2ef259 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 22 Jan 2019 14:12:25 -0800 Subject: [PATCH 065/125] hwmon: (via686a) Use permission specific SENSOR[_DEVICE]_ATTR variants Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code, to improve readbility, and to reduce the chance of inconsistencies. Also replace any remaining S_ in the driver with octal values. The conversion was done automatically with coccinelle. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches/. This patch does not introduce functional changes. It was verified by compiling the old and new files and comparing text and data sizes. Signed-off-by: Guenter Roeck --- drivers/hwmon/via686a.c | 148 ++++++++++++++++++++-------------------- 1 file changed, 73 insertions(+), 75 deletions(-) diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c index 81f35e3a06b8..259725dec37e 100644 --- a/drivers/hwmon/via686a.c +++ b/drivers/hwmon/via686a.c @@ -47,7 +47,6 @@ #include #include - /* * If force_addr is set to anything different from 0, we forcibly enable * the device at the given address. @@ -355,32 +354,32 @@ static void via686a_init_device(struct via686a_data *data); /* following are the sysfs callback functions */ /* 7 voltage sensors */ -static ssize_t show_in(struct device *dev, struct device_attribute *da, - char *buf) { +static ssize_t in_show(struct device *dev, struct device_attribute *da, + char *buf) { struct via686a_data *data = via686a_update_device(dev); struct sensor_device_attribute *attr = to_sensor_dev_attr(da); int nr = attr->index; return sprintf(buf, "%ld\n", IN_FROM_REG(data->in[nr], nr)); } -static ssize_t show_in_min(struct device *dev, struct device_attribute *da, - char *buf) { +static ssize_t in_min_show(struct device *dev, struct device_attribute *da, + char *buf) { struct via686a_data *data = via686a_update_device(dev); struct sensor_device_attribute *attr = to_sensor_dev_attr(da); int nr = attr->index; return sprintf(buf, "%ld\n", IN_FROM_REG(data->in_min[nr], nr)); } -static ssize_t show_in_max(struct device *dev, struct device_attribute *da, - char *buf) { +static ssize_t in_max_show(struct device *dev, struct device_attribute *da, + char *buf) { struct via686a_data *data = via686a_update_device(dev); struct sensor_device_attribute *attr = to_sensor_dev_attr(da); int nr = attr->index; return sprintf(buf, "%ld\n", IN_FROM_REG(data->in_max[nr], nr)); } -static ssize_t set_in_min(struct device *dev, struct device_attribute *da, - const char *buf, size_t count) { +static ssize_t in_min_store(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) { struct via686a_data *data = dev_get_drvdata(dev); struct sensor_device_attribute *attr = to_sensor_dev_attr(da); int nr = attr->index; @@ -398,8 +397,8 @@ static ssize_t set_in_min(struct device *dev, struct device_attribute *da, mutex_unlock(&data->update_lock); return count; } -static ssize_t set_in_max(struct device *dev, struct device_attribute *da, - const char *buf, size_t count) { +static ssize_t in_max_store(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) { struct via686a_data *data = dev_get_drvdata(dev); struct sensor_device_attribute *attr = to_sensor_dev_attr(da); int nr = attr->index; @@ -417,44 +416,48 @@ static ssize_t set_in_max(struct device *dev, struct device_attribute *da, mutex_unlock(&data->update_lock); return count; } -#define show_in_offset(offset) \ -static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \ - show_in, NULL, offset); \ -static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ - show_in_min, set_in_min, offset); \ -static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ - show_in_max, set_in_max, offset); -show_in_offset(0); -show_in_offset(1); -show_in_offset(2); -show_in_offset(3); -show_in_offset(4); +static SENSOR_DEVICE_ATTR_RO(in0_input, in, 0); +static SENSOR_DEVICE_ATTR_RW(in0_min, in_min, 0); +static SENSOR_DEVICE_ATTR_RW(in0_max, in_max, 0); +static SENSOR_DEVICE_ATTR_RO(in1_input, in, 1); +static SENSOR_DEVICE_ATTR_RW(in1_min, in_min, 1); +static SENSOR_DEVICE_ATTR_RW(in1_max, in_max, 1); +static SENSOR_DEVICE_ATTR_RO(in2_input, in, 2); +static SENSOR_DEVICE_ATTR_RW(in2_min, in_min, 2); +static SENSOR_DEVICE_ATTR_RW(in2_max, in_max, 2); +static SENSOR_DEVICE_ATTR_RO(in3_input, in, 3); +static SENSOR_DEVICE_ATTR_RW(in3_min, in_min, 3); +static SENSOR_DEVICE_ATTR_RW(in3_max, in_max, 3); +static SENSOR_DEVICE_ATTR_RO(in4_input, in, 4); +static SENSOR_DEVICE_ATTR_RW(in4_min, in_min, 4); +static SENSOR_DEVICE_ATTR_RW(in4_max, in_max, 4); /* 3 temperatures */ -static ssize_t show_temp(struct device *dev, struct device_attribute *da, - char *buf) { +static ssize_t temp_show(struct device *dev, struct device_attribute *da, + char *buf) { struct via686a_data *data = via686a_update_device(dev); struct sensor_device_attribute *attr = to_sensor_dev_attr(da); int nr = attr->index; return sprintf(buf, "%ld\n", TEMP_FROM_REG10(data->temp[nr])); } -static ssize_t show_temp_over(struct device *dev, struct device_attribute *da, - char *buf) { +static ssize_t temp_over_show(struct device *dev, struct device_attribute *da, + char *buf) { struct via686a_data *data = via686a_update_device(dev); struct sensor_device_attribute *attr = to_sensor_dev_attr(da); int nr = attr->index; return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp_over[nr])); } -static ssize_t show_temp_hyst(struct device *dev, struct device_attribute *da, - char *buf) { +static ssize_t temp_hyst_show(struct device *dev, struct device_attribute *da, + char *buf) { struct via686a_data *data = via686a_update_device(dev); struct sensor_device_attribute *attr = to_sensor_dev_attr(da); int nr = attr->index; return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp_hyst[nr])); } -static ssize_t set_temp_over(struct device *dev, struct device_attribute *da, - const char *buf, size_t count) { +static ssize_t temp_over_store(struct device *dev, + struct device_attribute *da, const char *buf, + size_t count) { struct via686a_data *data = dev_get_drvdata(dev); struct sensor_device_attribute *attr = to_sensor_dev_attr(da); int nr = attr->index; @@ -472,8 +475,9 @@ static ssize_t set_temp_over(struct device *dev, struct device_attribute *da, mutex_unlock(&data->update_lock); return count; } -static ssize_t set_temp_hyst(struct device *dev, struct device_attribute *da, - const char *buf, size_t count) { +static ssize_t temp_hyst_store(struct device *dev, + struct device_attribute *da, const char *buf, + size_t count) { struct via686a_data *data = dev_get_drvdata(dev); struct sensor_device_attribute *attr = to_sensor_dev_attr(da); int nr = attr->index; @@ -491,29 +495,28 @@ static ssize_t set_temp_hyst(struct device *dev, struct device_attribute *da, mutex_unlock(&data->update_lock); return count; } -#define show_temp_offset(offset) \ -static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \ - show_temp, NULL, offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \ - show_temp_over, set_temp_over, offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO | S_IWUSR, \ - show_temp_hyst, set_temp_hyst, offset - 1); -show_temp_offset(1); -show_temp_offset(2); -show_temp_offset(3); +static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, 0); +static SENSOR_DEVICE_ATTR_RW(temp1_max, temp_over, 0); +static SENSOR_DEVICE_ATTR_RW(temp1_max_hyst, temp_hyst, 0); +static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, 1); +static SENSOR_DEVICE_ATTR_RW(temp2_max, temp_over, 1); +static SENSOR_DEVICE_ATTR_RW(temp2_max_hyst, temp_hyst, 1); +static SENSOR_DEVICE_ATTR_RO(temp3_input, temp, 2); +static SENSOR_DEVICE_ATTR_RW(temp3_max, temp_over, 2); +static SENSOR_DEVICE_ATTR_RW(temp3_max_hyst, temp_hyst, 2); /* 2 Fans */ -static ssize_t show_fan(struct device *dev, struct device_attribute *da, - char *buf) { +static ssize_t fan_show(struct device *dev, struct device_attribute *da, + char *buf) { struct via686a_data *data = via686a_update_device(dev); struct sensor_device_attribute *attr = to_sensor_dev_attr(da); int nr = attr->index; return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr], DIV_FROM_REG(data->fan_div[nr]))); } -static ssize_t show_fan_min(struct device *dev, struct device_attribute *da, - char *buf) { +static ssize_t fan_min_show(struct device *dev, struct device_attribute *da, + char *buf) { struct via686a_data *data = via686a_update_device(dev); struct sensor_device_attribute *attr = to_sensor_dev_attr(da); int nr = attr->index; @@ -521,15 +524,15 @@ static ssize_t show_fan_min(struct device *dev, struct device_attribute *da, FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr]))); } -static ssize_t show_fan_div(struct device *dev, struct device_attribute *da, - char *buf) { +static ssize_t fan_div_show(struct device *dev, struct device_attribute *da, + char *buf) { struct via686a_data *data = via686a_update_device(dev); struct sensor_device_attribute *attr = to_sensor_dev_attr(da); int nr = attr->index; return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr])); } -static ssize_t set_fan_min(struct device *dev, struct device_attribute *da, - const char *buf, size_t count) { +static ssize_t fan_min_store(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) { struct via686a_data *data = dev_get_drvdata(dev); struct sensor_device_attribute *attr = to_sensor_dev_attr(da); int nr = attr->index; @@ -546,8 +549,8 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute *da, mutex_unlock(&data->update_lock); return count; } -static ssize_t set_fan_div(struct device *dev, struct device_attribute *da, - const char *buf, size_t count) { +static ssize_t fan_div_store(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) { struct via686a_data *data = dev_get_drvdata(dev); struct sensor_device_attribute *attr = to_sensor_dev_attr(da); int nr = attr->index; @@ -568,16 +571,12 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *da, return count; } -#define show_fan_offset(offset) \ -static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \ - show_fan, NULL, offset - 1); \ -static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ - show_fan_min, set_fan_min, offset - 1); \ -static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \ - show_fan_div, set_fan_div, offset - 1); - -show_fan_offset(1); -show_fan_offset(2); +static SENSOR_DEVICE_ATTR_RO(fan1_input, fan, 0); +static SENSOR_DEVICE_ATTR_RW(fan1_min, fan_min, 0); +static SENSOR_DEVICE_ATTR_RW(fan1_div, fan_div, 0); +static SENSOR_DEVICE_ATTR_RO(fan2_input, fan, 1); +static SENSOR_DEVICE_ATTR_RW(fan2_min, fan_min, 1); +static SENSOR_DEVICE_ATTR_RW(fan2_div, fan_div, 1); /* Alarms */ static ssize_t alarms_show(struct device *dev, struct device_attribute *attr, @@ -589,23 +588,23 @@ static ssize_t alarms_show(struct device *dev, struct device_attribute *attr, static DEVICE_ATTR_RO(alarms); -static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, +static ssize_t alarm_show(struct device *dev, struct device_attribute *attr, char *buf) { int bitnr = to_sensor_dev_attr(attr)->index; struct via686a_data *data = via686a_update_device(dev); return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1); } -static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0); -static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1); -static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2); -static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3); -static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8); -static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4); -static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 11); -static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 15); -static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6); -static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7); +static SENSOR_DEVICE_ATTR_RO(in0_alarm, alarm, 0); +static SENSOR_DEVICE_ATTR_RO(in1_alarm, alarm, 1); +static SENSOR_DEVICE_ATTR_RO(in2_alarm, alarm, 2); +static SENSOR_DEVICE_ATTR_RO(in3_alarm, alarm, 3); +static SENSOR_DEVICE_ATTR_RO(in4_alarm, alarm, 8); +static SENSOR_DEVICE_ATTR_RO(temp1_alarm, alarm, 4); +static SENSOR_DEVICE_ATTR_RO(temp2_alarm, alarm, 11); +static SENSOR_DEVICE_ATTR_RO(temp3_alarm, alarm, 15); +static SENSOR_DEVICE_ATTR_RO(fan1_alarm, alarm, 6); +static SENSOR_DEVICE_ATTR_RO(fan2_alarm, alarm, 7); static ssize_t name_show(struct device *dev, struct device_attribute *devattr, char *buf) @@ -676,7 +675,6 @@ static struct platform_driver via686a_driver = { .remove = via686a_remove, }; - /* This is called when the module is loaded */ static int via686a_probe(struct platform_device *pdev) { From 24f9ec1fa329b478963f72c2e8be4f16d80d4939 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 22 Jan 2019 14:16:57 -0800 Subject: [PATCH 066/125] hwmon: (menf21bmc_hwmon) Use permission specific SENSOR[_DEVICE]_ATTR variants Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code, to improve readbility, and to reduce the chance of inconsistencies. Also replace any remaining S_ in the driver with octal values. The conversion was done automatically with coccinelle. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches/. This patch does not introduce functional changes. It was verified by compiling the old and new files and comparing text and data sizes. Cc: Andreas Werner Signed-off-by: Guenter Roeck --- drivers/hwmon/menf21bmc_hwmon.c | 43 ++++++++++++++++++--------------- 1 file changed, 24 insertions(+), 19 deletions(-) diff --git a/drivers/hwmon/menf21bmc_hwmon.c b/drivers/hwmon/menf21bmc_hwmon.c index c29a4c3c6b9e..f540f938fcd9 100644 --- a/drivers/hwmon/menf21bmc_hwmon.c +++ b/drivers/hwmon/menf21bmc_hwmon.c @@ -101,7 +101,7 @@ static int menf21bmc_hwmon_get_volt_limits(struct menf21bmc_hwmon *drv_data) } static ssize_t -show_label(struct device *dev, struct device_attribute *devattr, char *buf) +label_show(struct device *dev, struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); @@ -109,7 +109,7 @@ show_label(struct device *dev, struct device_attribute *devattr, char *buf) } static ssize_t -show_in(struct device *dev, struct device_attribute *devattr, char *buf) +in_show(struct device *dev, struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct menf21bmc_hwmon *drv_data = menf21bmc_hwmon_update(dev); @@ -121,7 +121,7 @@ show_in(struct device *dev, struct device_attribute *devattr, char *buf) } static ssize_t -show_min(struct device *dev, struct device_attribute *devattr, char *buf) +min_show(struct device *dev, struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct menf21bmc_hwmon *drv_data = dev_get_drvdata(dev); @@ -130,7 +130,7 @@ show_min(struct device *dev, struct device_attribute *devattr, char *buf) } static ssize_t -show_max(struct device *dev, struct device_attribute *devattr, char *buf) +max_show(struct device *dev, struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct menf21bmc_hwmon *drv_data = dev_get_drvdata(dev); @@ -138,21 +138,26 @@ show_max(struct device *dev, struct device_attribute *devattr, char *buf) return sprintf(buf, "%d\n", drv_data->in_max[attr->index]); } -#define create_voltage_sysfs(idx) \ -static SENSOR_DEVICE_ATTR(in##idx##_input, S_IRUGO, \ - show_in, NULL, idx); \ -static SENSOR_DEVICE_ATTR(in##idx##_min, S_IRUGO, \ - show_min, NULL, idx); \ -static SENSOR_DEVICE_ATTR(in##idx##_max, S_IRUGO, \ - show_max, NULL, idx); \ -static SENSOR_DEVICE_ATTR(in##idx##_label, S_IRUGO, \ - show_label, NULL, idx); - -create_voltage_sysfs(0); -create_voltage_sysfs(1); -create_voltage_sysfs(2); -create_voltage_sysfs(3); -create_voltage_sysfs(4); +static SENSOR_DEVICE_ATTR_RO(in0_input, in, 0); +static SENSOR_DEVICE_ATTR_RO(in0_min, min, 0); +static SENSOR_DEVICE_ATTR_RO(in0_max, max, 0); +static SENSOR_DEVICE_ATTR_RO(in0_label, label, 0); +static SENSOR_DEVICE_ATTR_RO(in1_input, in, 1); +static SENSOR_DEVICE_ATTR_RO(in1_min, min, 1); +static SENSOR_DEVICE_ATTR_RO(in1_max, max, 1); +static SENSOR_DEVICE_ATTR_RO(in1_label, label, 1); +static SENSOR_DEVICE_ATTR_RO(in2_input, in, 2); +static SENSOR_DEVICE_ATTR_RO(in2_min, min, 2); +static SENSOR_DEVICE_ATTR_RO(in2_max, max, 2); +static SENSOR_DEVICE_ATTR_RO(in2_label, label, 2); +static SENSOR_DEVICE_ATTR_RO(in3_input, in, 3); +static SENSOR_DEVICE_ATTR_RO(in3_min, min, 3); +static SENSOR_DEVICE_ATTR_RO(in3_max, max, 3); +static SENSOR_DEVICE_ATTR_RO(in3_label, label, 3); +static SENSOR_DEVICE_ATTR_RO(in4_input, in, 4); +static SENSOR_DEVICE_ATTR_RO(in4_min, min, 4); +static SENSOR_DEVICE_ATTR_RO(in4_max, max, 4); +static SENSOR_DEVICE_ATTR_RO(in4_label, label, 4); static struct attribute *menf21bmc_hwmon_attrs[] = { &sensor_dev_attr_in0_input.dev_attr.attr, From 60a9c3f150df31c45d3a97a7393d0571b433815a Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 22 Jan 2019 14:28:50 -0800 Subject: [PATCH 067/125] hwmon: (sis5595) Use permission specific SENSOR[_DEVICE]_ATTR variants Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code, to improve readbility, and to reduce the chance of inconsistencies. Also replace any remaining S_ in the driver with octal values. The conversion was done automatically with coccinelle. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches/. This patch does not introduce functional changes. It was verified by compiling the old and new files and comparing text and data sizes. Signed-off-by: Guenter Roeck --- drivers/hwmon/sis5595.c | 92 ++++++++++++++++++++--------------------- 1 file changed, 44 insertions(+), 48 deletions(-) diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c index 6d789aab54c9..44451b913292 100644 --- a/drivers/hwmon/sis5595.c +++ b/drivers/hwmon/sis5595.c @@ -67,7 +67,6 @@ #include #include - /* * If force_addr is set to anything different from 0, we forcibly enable * the device at the given address. @@ -222,7 +221,7 @@ static struct platform_driver sis5595_driver = { }; /* 4 Voltages */ -static ssize_t show_in(struct device *dev, struct device_attribute *da, +static ssize_t in_show(struct device *dev, struct device_attribute *da, char *buf) { struct sis5595_data *data = sis5595_update_device(dev); @@ -231,7 +230,7 @@ static ssize_t show_in(struct device *dev, struct device_attribute *da, return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr])); } -static ssize_t show_in_min(struct device *dev, struct device_attribute *da, +static ssize_t in_min_show(struct device *dev, struct device_attribute *da, char *buf) { struct sis5595_data *data = sis5595_update_device(dev); @@ -240,7 +239,7 @@ static ssize_t show_in_min(struct device *dev, struct device_attribute *da, return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr])); } -static ssize_t show_in_max(struct device *dev, struct device_attribute *da, +static ssize_t in_max_show(struct device *dev, struct device_attribute *da, char *buf) { struct sis5595_data *data = sis5595_update_device(dev); @@ -249,8 +248,8 @@ static ssize_t show_in_max(struct device *dev, struct device_attribute *da, return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr])); } -static ssize_t set_in_min(struct device *dev, struct device_attribute *da, - const char *buf, size_t count) +static ssize_t in_min_store(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) { struct sis5595_data *data = dev_get_drvdata(dev); struct sensor_device_attribute *attr = to_sensor_dev_attr(da); @@ -269,8 +268,8 @@ static ssize_t set_in_min(struct device *dev, struct device_attribute *da, return count; } -static ssize_t set_in_max(struct device *dev, struct device_attribute *da, - const char *buf, size_t count) +static ssize_t in_max_store(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) { struct sis5595_data *data = dev_get_drvdata(dev); struct sensor_device_attribute *attr = to_sensor_dev_attr(da); @@ -289,19 +288,21 @@ static ssize_t set_in_max(struct device *dev, struct device_attribute *da, return count; } -#define show_in_offset(offset) \ -static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \ - show_in, NULL, offset); \ -static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ - show_in_min, set_in_min, offset); \ -static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ - show_in_max, set_in_max, offset); - -show_in_offset(0); -show_in_offset(1); -show_in_offset(2); -show_in_offset(3); -show_in_offset(4); +static SENSOR_DEVICE_ATTR_RO(in0_input, in, 0); +static SENSOR_DEVICE_ATTR_RW(in0_min, in_min, 0); +static SENSOR_DEVICE_ATTR_RW(in0_max, in_max, 0); +static SENSOR_DEVICE_ATTR_RO(in1_input, in, 1); +static SENSOR_DEVICE_ATTR_RW(in1_min, in_min, 1); +static SENSOR_DEVICE_ATTR_RW(in1_max, in_max, 1); +static SENSOR_DEVICE_ATTR_RO(in2_input, in, 2); +static SENSOR_DEVICE_ATTR_RW(in2_min, in_min, 2); +static SENSOR_DEVICE_ATTR_RW(in2_max, in_max, 2); +static SENSOR_DEVICE_ATTR_RO(in3_input, in, 3); +static SENSOR_DEVICE_ATTR_RW(in3_min, in_min, 3); +static SENSOR_DEVICE_ATTR_RW(in3_max, in_max, 3); +static SENSOR_DEVICE_ATTR_RO(in4_input, in, 4); +static SENSOR_DEVICE_ATTR_RW(in4_min, in_min, 4); +static SENSOR_DEVICE_ATTR_RW(in4_max, in_max, 4); /* Temperature */ static ssize_t temp1_input_show(struct device *dev, @@ -368,7 +369,7 @@ static DEVICE_ATTR_RW(temp1_max); static DEVICE_ATTR_RW(temp1_max_hyst); /* 2 Fans */ -static ssize_t show_fan(struct device *dev, struct device_attribute *da, +static ssize_t fan_show(struct device *dev, struct device_attribute *da, char *buf) { struct sis5595_data *data = sis5595_update_device(dev); @@ -378,7 +379,7 @@ static ssize_t show_fan(struct device *dev, struct device_attribute *da, DIV_FROM_REG(data->fan_div[nr]))); } -static ssize_t show_fan_min(struct device *dev, struct device_attribute *da, +static ssize_t fan_min_show(struct device *dev, struct device_attribute *da, char *buf) { struct sis5595_data *data = sis5595_update_device(dev); @@ -388,8 +389,8 @@ static ssize_t show_fan_min(struct device *dev, struct device_attribute *da, DIV_FROM_REG(data->fan_div[nr]))); } -static ssize_t set_fan_min(struct device *dev, struct device_attribute *da, - const char *buf, size_t count) +static ssize_t fan_min_store(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) { struct sis5595_data *data = dev_get_drvdata(dev); struct sensor_device_attribute *attr = to_sensor_dev_attr(da); @@ -408,7 +409,7 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute *da, return count; } -static ssize_t show_fan_div(struct device *dev, struct device_attribute *da, +static ssize_t fan_div_show(struct device *dev, struct device_attribute *da, char *buf) { struct sis5595_data *data = sis5595_update_device(dev); @@ -423,8 +424,8 @@ static ssize_t show_fan_div(struct device *dev, struct device_attribute *da, * least surprise; the user doesn't expect the fan minimum to change just * because the divisor changed. */ -static ssize_t set_fan_div(struct device *dev, struct device_attribute *da, - const char *buf, size_t count) +static ssize_t fan_div_store(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) { struct sis5595_data *data = dev_get_drvdata(dev); struct sensor_device_attribute *attr = to_sensor_dev_attr(da); @@ -480,16 +481,12 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *da, return count; } -#define show_fan_offset(offset) \ -static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \ - show_fan, NULL, offset - 1); \ -static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ - show_fan_min, set_fan_min, offset - 1); \ -static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \ - show_fan_div, set_fan_div, offset - 1); - -show_fan_offset(1); -show_fan_offset(2); +static SENSOR_DEVICE_ATTR_RO(fan1_input, fan, 0); +static SENSOR_DEVICE_ATTR_RW(fan1_min, fan_min, 0); +static SENSOR_DEVICE_ATTR_RW(fan1_div, fan_div, 0); +static SENSOR_DEVICE_ATTR_RO(fan2_input, fan, 1); +static SENSOR_DEVICE_ATTR_RW(fan2_min, fan_min, 1); +static SENSOR_DEVICE_ATTR_RW(fan2_div, fan_div, 1); /* Alarms */ static ssize_t alarms_show(struct device *dev, struct device_attribute *attr, @@ -500,21 +497,21 @@ static ssize_t alarms_show(struct device *dev, struct device_attribute *attr, } static DEVICE_ATTR_RO(alarms); -static ssize_t show_alarm(struct device *dev, struct device_attribute *da, +static ssize_t alarm_show(struct device *dev, struct device_attribute *da, char *buf) { struct sis5595_data *data = sis5595_update_device(dev); int nr = to_sensor_dev_attr(da)->index; return sprintf(buf, "%u\n", (data->alarms >> nr) & 1); } -static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0); -static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1); -static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2); -static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3); -static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 15); -static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6); -static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7); -static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 15); +static SENSOR_DEVICE_ATTR_RO(in0_alarm, alarm, 0); +static SENSOR_DEVICE_ATTR_RO(in1_alarm, alarm, 1); +static SENSOR_DEVICE_ATTR_RO(in2_alarm, alarm, 2); +static SENSOR_DEVICE_ATTR_RO(in3_alarm, alarm, 3); +static SENSOR_DEVICE_ATTR_RO(in4_alarm, alarm, 15); +static SENSOR_DEVICE_ATTR_RO(fan1_alarm, alarm, 6); +static SENSOR_DEVICE_ATTR_RO(fan2_alarm, alarm, 7); +static SENSOR_DEVICE_ATTR_RO(temp1_alarm, alarm, 15); static ssize_t name_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -673,7 +670,6 @@ static int sis5595_remove(struct platform_device *pdev) return 0; } - /* ISA access must be locked explicitly. */ static int sis5595_read_value(struct sis5595_data *data, u8 reg) { From 08ea5a87466b93d4b1b17369f9008fd9b2f8032c Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 22 Jan 2019 14:30:27 -0800 Subject: [PATCH 068/125] hwmon: (vt8231) Use permission specific SENSOR[_DEVICE]_ATTR variants Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code, to improve readbility, and to reduce the chance of inconsistencies. Also replace any remaining S_ in the driver with octal values. The conversion was done automatically with coccinelle. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches/. This patch does not introduce functional changes. It was verified by compiling the old and new files and comparing text and data sizes. Cc: Roger Lucas Signed-off-by: Guenter Roeck --- drivers/hwmon/vt8231.c | 166 +++++++++++++++++++++-------------------- 1 file changed, 85 insertions(+), 81 deletions(-) diff --git a/drivers/hwmon/vt8231.c b/drivers/hwmon/vt8231.c index 367b5eb53fb6..e2f1a80367e2 100644 --- a/drivers/hwmon/vt8231.c +++ b/drivers/hwmon/vt8231.c @@ -192,8 +192,8 @@ static inline void vt8231_write_value(struct vt8231_data *data, u8 reg, } /* following are the sysfs callback functions */ -static ssize_t show_in(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t in_show(struct device *dev, struct device_attribute *attr, + char *buf) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -202,8 +202,8 @@ static ssize_t show_in(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%d\n", ((data->in[nr] - 3) * 10000) / 958); } -static ssize_t show_in_min(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t in_min_show(struct device *dev, struct device_attribute *attr, + char *buf) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -212,8 +212,8 @@ static ssize_t show_in_min(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%d\n", ((data->in_min[nr] - 3) * 10000) / 958); } -static ssize_t show_in_max(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t in_max_show(struct device *dev, struct device_attribute *attr, + char *buf) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -222,8 +222,8 @@ static ssize_t show_in_max(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%d\n", (((data->in_max[nr] - 3) * 10000) / 958)); } -static ssize_t set_in_min(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t in_min_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -242,8 +242,8 @@ static ssize_t set_in_min(struct device *dev, struct device_attribute *attr, return count; } -static ssize_t set_in_max(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t in_max_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -330,19 +330,21 @@ static ssize_t in5_max_store(struct device *dev, return count; } -#define define_voltage_sysfs(offset) \ -static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \ - show_in, NULL, offset); \ -static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ - show_in_min, set_in_min, offset); \ -static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ - show_in_max, set_in_max, offset) - -define_voltage_sysfs(0); -define_voltage_sysfs(1); -define_voltage_sysfs(2); -define_voltage_sysfs(3); -define_voltage_sysfs(4); +static SENSOR_DEVICE_ATTR_RO(in0_input, in, 0); +static SENSOR_DEVICE_ATTR_RW(in0_min, in_min, 0); +static SENSOR_DEVICE_ATTR_RW(in0_max, in_max, 0); +static SENSOR_DEVICE_ATTR_RO(in1_input, in, 1); +static SENSOR_DEVICE_ATTR_RW(in1_min, in_min, 1); +static SENSOR_DEVICE_ATTR_RW(in1_max, in_max, 1); +static SENSOR_DEVICE_ATTR_RO(in2_input, in, 2); +static SENSOR_DEVICE_ATTR_RW(in2_min, in_min, 2); +static SENSOR_DEVICE_ATTR_RW(in2_max, in_max, 2); +static SENSOR_DEVICE_ATTR_RO(in3_input, in, 3); +static SENSOR_DEVICE_ATTR_RW(in3_min, in_min, 3); +static SENSOR_DEVICE_ATTR_RW(in3_max, in_max, 3); +static SENSOR_DEVICE_ATTR_RO(in4_input, in, 4); +static SENSOR_DEVICE_ATTR_RW(in4_min, in_min, 4); +static SENSOR_DEVICE_ATTR_RW(in4_max, in_max, 4); static DEVICE_ATTR_RO(in5_input); static DEVICE_ATTR_RW(in5_min); @@ -407,8 +409,8 @@ static ssize_t temp1_max_hyst_store(struct device *dev, return count; } -static ssize_t show_temp(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t temp_show(struct device *dev, struct device_attribute *attr, + char *buf) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -416,8 +418,8 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr])); } -static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t temp_max_show(struct device *dev, + struct device_attribute *attr, char *buf) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -425,8 +427,8 @@ static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%d\n", TEMP_MAXMIN_FROM_REG(data->temp_max[nr])); } -static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t temp_min_show(struct device *dev, + struct device_attribute *attr, char *buf) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -434,8 +436,9 @@ static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%d\n", TEMP_MAXMIN_FROM_REG(data->temp_min[nr])); } -static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t temp_max_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -453,8 +456,9 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, mutex_unlock(&data->update_lock); return count; } -static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t temp_min_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -477,27 +481,30 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, * Note that these map the Linux temperature sensor numbering (1-6) to the VIA * temperature sensor numbering (0-5) */ -#define define_temperature_sysfs(offset) \ -static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \ - show_temp, NULL, offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \ - show_temp_max, set_temp_max, offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO | S_IWUSR, \ - show_temp_min, set_temp_min, offset - 1) static DEVICE_ATTR_RO(temp1_input); static DEVICE_ATTR_RW(temp1_max); static DEVICE_ATTR_RW(temp1_max_hyst); -define_temperature_sysfs(2); -define_temperature_sysfs(3); -define_temperature_sysfs(4); -define_temperature_sysfs(5); -define_temperature_sysfs(6); +static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, 1); +static SENSOR_DEVICE_ATTR_RW(temp2_max, temp_max, 1); +static SENSOR_DEVICE_ATTR_RW(temp2_max_hyst, temp_min, 1); +static SENSOR_DEVICE_ATTR_RO(temp3_input, temp, 2); +static SENSOR_DEVICE_ATTR_RW(temp3_max, temp_max, 2); +static SENSOR_DEVICE_ATTR_RW(temp3_max_hyst, temp_min, 2); +static SENSOR_DEVICE_ATTR_RO(temp4_input, temp, 3); +static SENSOR_DEVICE_ATTR_RW(temp4_max, temp_max, 3); +static SENSOR_DEVICE_ATTR_RW(temp4_max_hyst, temp_min, 3); +static SENSOR_DEVICE_ATTR_RO(temp5_input, temp, 4); +static SENSOR_DEVICE_ATTR_RW(temp5_max, temp_max, 4); +static SENSOR_DEVICE_ATTR_RW(temp5_max_hyst, temp_min, 4); +static SENSOR_DEVICE_ATTR_RO(temp6_input, temp, 5); +static SENSOR_DEVICE_ATTR_RW(temp6_max, temp_max, 5); +static SENSOR_DEVICE_ATTR_RW(temp6_max_hyst, temp_min, 5); /* Fans */ -static ssize_t show_fan(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t fan_show(struct device *dev, struct device_attribute *attr, + char *buf) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -506,8 +513,8 @@ static ssize_t show_fan(struct device *dev, struct device_attribute *attr, DIV_FROM_REG(data->fan_div[nr]))); } -static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t fan_min_show(struct device *dev, struct device_attribute *attr, + char *buf) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -516,8 +523,8 @@ static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr, DIV_FROM_REG(data->fan_div[nr]))); } -static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t fan_div_show(struct device *dev, struct device_attribute *attr, + char *buf) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -525,8 +532,9 @@ static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr])); } -static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t fan_min_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -545,8 +553,9 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr, return count; } -static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t fan_div_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) { struct vt8231_data *data = dev_get_drvdata(dev); struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); @@ -593,17 +602,12 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr, return count; } - -#define define_fan_sysfs(offset) \ -static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \ - show_fan, NULL, offset - 1); \ -static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \ - show_fan_div, set_fan_div, offset - 1); \ -static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ - show_fan_min, set_fan_min, offset - 1) - -define_fan_sysfs(1); -define_fan_sysfs(2); +static SENSOR_DEVICE_ATTR_RO(fan1_input, fan, 0); +static SENSOR_DEVICE_ATTR_RW(fan1_min, fan_min, 0); +static SENSOR_DEVICE_ATTR_RW(fan1_div, fan_div, 0); +static SENSOR_DEVICE_ATTR_RO(fan2_input, fan, 1); +static SENSOR_DEVICE_ATTR_RW(fan2_min, fan_min, 1); +static SENSOR_DEVICE_ATTR_RW(fan2_div, fan_div, 1); /* Alarms */ static ssize_t alarms_show(struct device *dev, struct device_attribute *attr, @@ -614,27 +618,27 @@ static ssize_t alarms_show(struct device *dev, struct device_attribute *attr, } static DEVICE_ATTR_RO(alarms); -static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, +static ssize_t alarm_show(struct device *dev, struct device_attribute *attr, char *buf) { int bitnr = to_sensor_dev_attr(attr)->index; struct vt8231_data *data = vt8231_update_device(dev); return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1); } -static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4); -static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 11); -static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 0); -static SENSOR_DEVICE_ATTR(temp4_alarm, S_IRUGO, show_alarm, NULL, 1); -static SENSOR_DEVICE_ATTR(temp5_alarm, S_IRUGO, show_alarm, NULL, 3); -static SENSOR_DEVICE_ATTR(temp6_alarm, S_IRUGO, show_alarm, NULL, 8); -static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 11); -static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 0); -static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 1); -static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3); -static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8); -static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 2); -static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6); -static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7); +static SENSOR_DEVICE_ATTR_RO(temp1_alarm, alarm, 4); +static SENSOR_DEVICE_ATTR_RO(temp2_alarm, alarm, 11); +static SENSOR_DEVICE_ATTR_RO(temp3_alarm, alarm, 0); +static SENSOR_DEVICE_ATTR_RO(temp4_alarm, alarm, 1); +static SENSOR_DEVICE_ATTR_RO(temp5_alarm, alarm, 3); +static SENSOR_DEVICE_ATTR_RO(temp6_alarm, alarm, 8); +static SENSOR_DEVICE_ATTR_RO(in0_alarm, alarm, 11); +static SENSOR_DEVICE_ATTR_RO(in1_alarm, alarm, 0); +static SENSOR_DEVICE_ATTR_RO(in2_alarm, alarm, 1); +static SENSOR_DEVICE_ATTR_RO(in3_alarm, alarm, 3); +static SENSOR_DEVICE_ATTR_RO(in4_alarm, alarm, 8); +static SENSOR_DEVICE_ATTR_RO(in5_alarm, alarm, 2); +static SENSOR_DEVICE_ATTR_RO(fan1_alarm, alarm, 6); +static SENSOR_DEVICE_ATTR_RO(fan2_alarm, alarm, 7); static ssize_t name_show(struct device *dev, struct device_attribute *devattr, char *buf) From f2bec7ea6c494669b4f9d79db581cb92f30e3b4c Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 22 Jan 2019 14:46:16 -0800 Subject: [PATCH 069/125] hwmon: (smsc47m192) Use permission specific SENSOR[_DEVICE]_ATTR variants Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code, to improve readbility, and to reduce the chance of inconsistencies. Also replace any remaining S_ in the driver with octal values. The conversion was done automatically with coccinelle. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches/. This patch does not introduce functional changes. It was verified by compiling the old and new files and comparing text and data sizes. Signed-off-by: Guenter Roeck --- drivers/hwmon/smsc47m192.c | 146 ++++++++++++++++++++----------------- 1 file changed, 78 insertions(+), 68 deletions(-) diff --git a/drivers/hwmon/smsc47m192.c b/drivers/hwmon/smsc47m192.c index 6989408033ec..e5d9222b22f1 100644 --- a/drivers/hwmon/smsc47m192.c +++ b/drivers/hwmon/smsc47m192.c @@ -179,8 +179,8 @@ static struct smsc47m192_data *smsc47m192_update_device(struct device *dev) } /* Voltages */ -static ssize_t show_in(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t in_show(struct device *dev, struct device_attribute *attr, + char *buf) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -188,8 +188,8 @@ static ssize_t show_in(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr], nr)); } -static ssize_t show_in_min(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t in_min_show(struct device *dev, struct device_attribute *attr, + char *buf) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -197,8 +197,8 @@ static ssize_t show_in_min(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr], nr)); } -static ssize_t show_in_max(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t in_max_show(struct device *dev, struct device_attribute *attr, + char *buf) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -206,8 +206,8 @@ static ssize_t show_in_max(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr], nr)); } -static ssize_t set_in_min(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t in_min_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -228,8 +228,8 @@ static ssize_t set_in_min(struct device *dev, struct device_attribute *attr, return count; } -static ssize_t set_in_max(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t in_max_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -250,26 +250,34 @@ static ssize_t set_in_max(struct device *dev, struct device_attribute *attr, return count; } -#define show_in_offset(offset) \ -static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \ - show_in, NULL, offset); \ -static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ - show_in_min, set_in_min, offset); \ -static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ - show_in_max, set_in_max, offset); - -show_in_offset(0) -show_in_offset(1) -show_in_offset(2) -show_in_offset(3) -show_in_offset(4) -show_in_offset(5) -show_in_offset(6) -show_in_offset(7) +static SENSOR_DEVICE_ATTR_RO(in0_input, in, 0); +static SENSOR_DEVICE_ATTR_RW(in0_min, in_min, 0); +static SENSOR_DEVICE_ATTR_RW(in0_max, in_max, 0); +static SENSOR_DEVICE_ATTR_RO(in1_input, in, 1); +static SENSOR_DEVICE_ATTR_RW(in1_min, in_min, 1); +static SENSOR_DEVICE_ATTR_RW(in1_max, in_max, 1); +static SENSOR_DEVICE_ATTR_RO(in2_input, in, 2); +static SENSOR_DEVICE_ATTR_RW(in2_min, in_min, 2); +static SENSOR_DEVICE_ATTR_RW(in2_max, in_max, 2); +static SENSOR_DEVICE_ATTR_RO(in3_input, in, 3); +static SENSOR_DEVICE_ATTR_RW(in3_min, in_min, 3); +static SENSOR_DEVICE_ATTR_RW(in3_max, in_max, 3); +static SENSOR_DEVICE_ATTR_RO(in4_input, in, 4); +static SENSOR_DEVICE_ATTR_RW(in4_min, in_min, 4); +static SENSOR_DEVICE_ATTR_RW(in4_max, in_max, 4); +static SENSOR_DEVICE_ATTR_RO(in5_input, in, 5); +static SENSOR_DEVICE_ATTR_RW(in5_min, in_min, 5); +static SENSOR_DEVICE_ATTR_RW(in5_max, in_max, 5); +static SENSOR_DEVICE_ATTR_RO(in6_input, in, 6); +static SENSOR_DEVICE_ATTR_RW(in6_min, in_min, 6); +static SENSOR_DEVICE_ATTR_RW(in6_max, in_max, 6); +static SENSOR_DEVICE_ATTR_RO(in7_input, in, 7); +static SENSOR_DEVICE_ATTR_RW(in7_min, in_min, 7); +static SENSOR_DEVICE_ATTR_RW(in7_max, in_max, 7); /* Temperatures */ -static ssize_t show_temp(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t temp_show(struct device *dev, struct device_attribute *attr, + char *buf) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -277,8 +285,8 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr])); } -static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t temp_min_show(struct device *dev, + struct device_attribute *attr, char *buf) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -286,8 +294,8 @@ static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[nr])); } -static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t temp_max_show(struct device *dev, + struct device_attribute *attr, char *buf) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -295,8 +303,9 @@ static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[nr])); } -static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t temp_min_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -317,8 +326,9 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, return count; } -static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t temp_max_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -339,8 +349,8 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, return count; } -static ssize_t show_temp_offset(struct device *dev, struct device_attribute - *attr, char *buf) +static ssize_t temp_offset_show(struct device *dev, + struct device_attribute *attr, char *buf) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -348,8 +358,9 @@ static ssize_t show_temp_offset(struct device *dev, struct device_attribute return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_offset[nr])); } -static ssize_t set_temp_offset(struct device *dev, struct device_attribute - *attr, const char *buf, size_t count) +static ssize_t temp_offset_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -385,19 +396,18 @@ static ssize_t set_temp_offset(struct device *dev, struct device_attribute return count; } -#define show_temp_index(index) \ -static SENSOR_DEVICE_ATTR(temp##index##_input, S_IRUGO, \ - show_temp, NULL, index-1); \ -static SENSOR_DEVICE_ATTR(temp##index##_min, S_IRUGO | S_IWUSR, \ - show_temp_min, set_temp_min, index-1); \ -static SENSOR_DEVICE_ATTR(temp##index##_max, S_IRUGO | S_IWUSR, \ - show_temp_max, set_temp_max, index-1); \ -static SENSOR_DEVICE_ATTR(temp##index##_offset, S_IRUGO | S_IWUSR, \ - show_temp_offset, set_temp_offset, index-1); - -show_temp_index(1) -show_temp_index(2) -show_temp_index(3) +static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, 0); +static SENSOR_DEVICE_ATTR_RW(temp1_min, temp_min, 0); +static SENSOR_DEVICE_ATTR_RW(temp1_max, temp_max, 0); +static SENSOR_DEVICE_ATTR_RW(temp1_offset, temp_offset, 0); +static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, 1); +static SENSOR_DEVICE_ATTR_RW(temp2_min, temp_min, 1); +static SENSOR_DEVICE_ATTR_RW(temp2_max, temp_max, 1); +static SENSOR_DEVICE_ATTR_RW(temp2_offset, temp_offset, 1); +static SENSOR_DEVICE_ATTR_RO(temp3_input, temp, 2); +static SENSOR_DEVICE_ATTR_RW(temp3_min, temp_min, 2); +static SENSOR_DEVICE_ATTR_RW(temp3_max, temp_max, 2); +static SENSOR_DEVICE_ATTR_RW(temp3_offset, temp_offset, 2); /* VID */ static ssize_t cpu0_vid_show(struct device *dev, @@ -434,8 +444,8 @@ static ssize_t vrm_store(struct device *dev, struct device_attribute *attr, static DEVICE_ATTR_RW(vrm); /* Alarms */ -static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t alarm_show(struct device *dev, struct device_attribute *attr, + char *buf) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -443,19 +453,19 @@ static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%u\n", (data->alarms & nr) ? 1 : 0); } -static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 0x0010); -static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 0x0020); -static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 0x0040); -static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 0x4000); -static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 0x8000); -static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0x0001); -static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 0x0002); -static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 0x0004); -static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 0x0008); -static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 0x0100); -static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 0x0200); -static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 0x0400); -static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 0x0800); +static SENSOR_DEVICE_ATTR_RO(temp1_alarm, alarm, 0x0010); +static SENSOR_DEVICE_ATTR_RO(temp2_alarm, alarm, 0x0020); +static SENSOR_DEVICE_ATTR_RO(temp3_alarm, alarm, 0x0040); +static SENSOR_DEVICE_ATTR_RO(temp2_fault, alarm, 0x4000); +static SENSOR_DEVICE_ATTR_RO(temp3_fault, alarm, 0x8000); +static SENSOR_DEVICE_ATTR_RO(in0_alarm, alarm, 0x0001); +static SENSOR_DEVICE_ATTR_RO(in1_alarm, alarm, 0x0002); +static SENSOR_DEVICE_ATTR_RO(in2_alarm, alarm, 0x0004); +static SENSOR_DEVICE_ATTR_RO(in3_alarm, alarm, 0x0008); +static SENSOR_DEVICE_ATTR_RO(in4_alarm, alarm, 0x0100); +static SENSOR_DEVICE_ATTR_RO(in5_alarm, alarm, 0x0200); +static SENSOR_DEVICE_ATTR_RO(in6_alarm, alarm, 0x0400); +static SENSOR_DEVICE_ATTR_RO(in7_alarm, alarm, 0x0800); static struct attribute *smsc47m192_attributes[] = { &sensor_dev_attr_in0_input.dev_attr.attr, From 96c6f81afaa12bb23104293689480fb55e6cfa12 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 22 Jan 2019 15:13:02 -0800 Subject: [PATCH 070/125] hwmon: (smsc47m1) Use permission specific SENSOR[_DEVICE]_ATTR variants Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code, to improve readbility, and to reduce the chance of inconsistencies. Also replace any remaining S_ in the driver with octal values. The conversion was done automatically with coccinelle. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches/. This patch does not introduce functional changes. It was verified by compiling the old and new files and comparing text and data sizes. Signed-off-by: Guenter Roeck --- drivers/hwmon/smsc47m1.c | 78 +++++++++++++++++++++------------------- 1 file changed, 41 insertions(+), 37 deletions(-) diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c index c7b6a425e2c0..5d0c6eaae6f2 100644 --- a/drivers/hwmon/smsc47m1.c +++ b/drivers/hwmon/smsc47m1.c @@ -202,8 +202,8 @@ static struct smsc47m1_data *smsc47m1_update_device(struct device *dev, return data; } -static ssize_t get_fan(struct device *dev, struct device_attribute - *devattr, char *buf) +static ssize_t fan_show(struct device *dev, struct device_attribute *devattr, + char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct smsc47m1_data *data = smsc47m1_update_device(dev, 0); @@ -221,8 +221,8 @@ static ssize_t get_fan(struct device *dev, struct device_attribute return sprintf(buf, "%d\n", rpm); } -static ssize_t get_fan_min(struct device *dev, struct device_attribute - *devattr, char *buf) +static ssize_t fan_min_show(struct device *dev, + struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct smsc47m1_data *data = smsc47m1_update_device(dev, 0); @@ -232,32 +232,32 @@ static ssize_t get_fan_min(struct device *dev, struct device_attribute return sprintf(buf, "%d\n", rpm); } -static ssize_t get_fan_div(struct device *dev, struct device_attribute - *devattr, char *buf) +static ssize_t fan_div_show(struct device *dev, + struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct smsc47m1_data *data = smsc47m1_update_device(dev, 0); return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[attr->index])); } -static ssize_t get_fan_alarm(struct device *dev, struct device_attribute - *devattr, char *buf) +static ssize_t fan_alarm_show(struct device *dev, + struct device_attribute *devattr, char *buf) { int bitnr = to_sensor_dev_attr(devattr)->index; struct smsc47m1_data *data = smsc47m1_update_device(dev, 0); return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1); } -static ssize_t get_pwm(struct device *dev, struct device_attribute - *devattr, char *buf) +static ssize_t pwm_show(struct device *dev, struct device_attribute *devattr, + char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct smsc47m1_data *data = smsc47m1_update_device(dev, 0); return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm[attr->index])); } -static ssize_t get_pwm_en(struct device *dev, struct device_attribute - *devattr, char *buf) +static ssize_t pwm_en_show(struct device *dev, + struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct smsc47m1_data *data = smsc47m1_update_device(dev, 0); @@ -271,8 +271,9 @@ static ssize_t alarms_show(struct device *dev, return sprintf(buf, "%d\n", data->alarms); } -static ssize_t set_fan_min(struct device *dev, struct device_attribute - *devattr, const char *buf, size_t count) +static ssize_t fan_min_store(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct smsc47m1_data *data = dev_get_drvdata(dev); @@ -307,8 +308,9 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute * of least surprise; the user doesn't expect the fan minimum to change just * because the divider changed. */ -static ssize_t set_fan_div(struct device *dev, struct device_attribute - *devattr, const char *buf, size_t count) +static ssize_t fan_div_store(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct smsc47m1_data *data = dev_get_drvdata(dev); @@ -370,8 +372,8 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute return count; } -static ssize_t set_pwm(struct device *dev, struct device_attribute - *devattr, const char *buf, size_t count) +static ssize_t pwm_store(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct smsc47m1_data *data = dev_get_drvdata(dev); @@ -396,8 +398,9 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute return count; } -static ssize_t set_pwm_en(struct device *dev, struct device_attribute - *devattr, const char *buf, size_t count) +static ssize_t pwm_en_store(struct device *dev, + struct device_attribute *devattr, const char *buf, + size_t count) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct smsc47m1_data *data = dev_get_drvdata(dev); @@ -422,23 +425,24 @@ static ssize_t set_pwm_en(struct device *dev, struct device_attribute return count; } -#define fan_present(offset) \ -static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, get_fan, \ - NULL, offset - 1); \ -static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ - get_fan_min, set_fan_min, offset - 1); \ -static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \ - get_fan_div, set_fan_div, offset - 1); \ -static SENSOR_DEVICE_ATTR(fan##offset##_alarm, S_IRUGO, get_fan_alarm, \ - NULL, offset - 1); \ -static SENSOR_DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \ - get_pwm, set_pwm, offset - 1); \ -static SENSOR_DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \ - get_pwm_en, set_pwm_en, offset - 1) - -fan_present(1); -fan_present(2); -fan_present(3); +static SENSOR_DEVICE_ATTR_RO(fan1_input, fan, 0); +static SENSOR_DEVICE_ATTR_RW(fan1_min, fan_min, 0); +static SENSOR_DEVICE_ATTR_RW(fan1_div, fan_div, 0); +static SENSOR_DEVICE_ATTR_RO(fan1_alarm, fan_alarm, 0); +static SENSOR_DEVICE_ATTR_RW(pwm1, pwm, 0); +static SENSOR_DEVICE_ATTR_RW(pwm1_enable, pwm_en, 0); +static SENSOR_DEVICE_ATTR_RO(fan2_input, fan, 1); +static SENSOR_DEVICE_ATTR_RW(fan2_min, fan_min, 1); +static SENSOR_DEVICE_ATTR_RW(fan2_div, fan_div, 1); +static SENSOR_DEVICE_ATTR_RO(fan2_alarm, fan_alarm, 1); +static SENSOR_DEVICE_ATTR_RW(pwm2, pwm, 1); +static SENSOR_DEVICE_ATTR_RW(pwm2_enable, pwm_en, 1); +static SENSOR_DEVICE_ATTR_RO(fan3_input, fan, 2); +static SENSOR_DEVICE_ATTR_RW(fan3_min, fan_min, 2); +static SENSOR_DEVICE_ATTR_RW(fan3_div, fan_div, 2); +static SENSOR_DEVICE_ATTR_RO(fan3_alarm, fan_alarm, 2); +static SENSOR_DEVICE_ATTR_RW(pwm3, pwm, 2); +static SENSOR_DEVICE_ATTR_RW(pwm3_enable, pwm_en, 2); static DEVICE_ATTR_RO(alarms); From 502a92ff25b3651e19c4f358643014e96922ebbf Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 22 Jan 2019 15:25:47 -0800 Subject: [PATCH 071/125] hwmon: (w83627hf) Use permission specific SENSOR[_DEVICE]_ATTR variants Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code, to improve readbility, and to reduce the chance of inconsistencies. Also replace any remaining S_ in the driver with octal values. The conversion was done automatically with coccinelle. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches/. This patch does not introduce functional changes. It was verified by compiling the old and new files and comparing text and data sizes. Signed-off-by: Guenter Roeck --- drivers/hwmon/w83627hf.c | 255 ++++++++++++++++++--------------------- 1 file changed, 115 insertions(+), 140 deletions(-) diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index 8ac89d0781cc..97bbf1af11e8 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -396,7 +396,6 @@ struct w83627hf_data { #endif }; - static int w83627hf_probe(struct platform_device *pdev); static int w83627hf_remove(struct platform_device *pdev); @@ -482,28 +481,28 @@ static struct platform_driver w83627hf_driver = { }; static ssize_t -show_in_input(struct device *dev, struct device_attribute *devattr, char *buf) +in_input_show(struct device *dev, struct device_attribute *devattr, char *buf) { int nr = to_sensor_dev_attr(devattr)->index; struct w83627hf_data *data = w83627hf_update_device(dev); return sprintf(buf, "%ld\n", (long)IN_FROM_REG(data->in[nr])); } static ssize_t -show_in_min(struct device *dev, struct device_attribute *devattr, char *buf) +in_min_show(struct device *dev, struct device_attribute *devattr, char *buf) { int nr = to_sensor_dev_attr(devattr)->index; struct w83627hf_data *data = w83627hf_update_device(dev); return sprintf(buf, "%ld\n", (long)IN_FROM_REG(data->in_min[nr])); } static ssize_t -show_in_max(struct device *dev, struct device_attribute *devattr, char *buf) +in_max_show(struct device *dev, struct device_attribute *devattr, char *buf) { int nr = to_sensor_dev_attr(devattr)->index; struct w83627hf_data *data = w83627hf_update_device(dev); return sprintf(buf, "%ld\n", (long)IN_FROM_REG(data->in_max[nr])); } static ssize_t -store_in_min(struct device *dev, struct device_attribute *devattr, +in_min_store(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { int nr = to_sensor_dev_attr(devattr)->index; @@ -522,7 +521,7 @@ store_in_min(struct device *dev, struct device_attribute *devattr, return count; } static ssize_t -store_in_max(struct device *dev, struct device_attribute *devattr, +in_max_store(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { int nr = to_sensor_dev_attr(devattr)->index; @@ -540,22 +539,31 @@ store_in_max(struct device *dev, struct device_attribute *devattr, mutex_unlock(&data->update_lock); return count; } -#define sysfs_vin_decl(offset) \ -static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \ - show_in_input, NULL, offset); \ -static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO|S_IWUSR, \ - show_in_min, store_in_min, offset); \ -static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO|S_IWUSR, \ - show_in_max, store_in_max, offset); -sysfs_vin_decl(1); -sysfs_vin_decl(2); -sysfs_vin_decl(3); -sysfs_vin_decl(4); -sysfs_vin_decl(5); -sysfs_vin_decl(6); -sysfs_vin_decl(7); -sysfs_vin_decl(8); +static SENSOR_DEVICE_ATTR_RO(in1_input, in_input, 1); +static SENSOR_DEVICE_ATTR_RW(in1_min, in_min, 1); +static SENSOR_DEVICE_ATTR_RW(in1_max, in_max, 1); +static SENSOR_DEVICE_ATTR_RO(in2_input, in_input, 2); +static SENSOR_DEVICE_ATTR_RW(in2_min, in_min, 2); +static SENSOR_DEVICE_ATTR_RW(in2_max, in_max, 2); +static SENSOR_DEVICE_ATTR_RO(in3_input, in_input, 3); +static SENSOR_DEVICE_ATTR_RW(in3_min, in_min, 3); +static SENSOR_DEVICE_ATTR_RW(in3_max, in_max, 3); +static SENSOR_DEVICE_ATTR_RO(in4_input, in_input, 4); +static SENSOR_DEVICE_ATTR_RW(in4_min, in_min, 4); +static SENSOR_DEVICE_ATTR_RW(in4_max, in_max, 4); +static SENSOR_DEVICE_ATTR_RO(in5_input, in_input, 5); +static SENSOR_DEVICE_ATTR_RW(in5_min, in_min, 5); +static SENSOR_DEVICE_ATTR_RW(in5_max, in_max, 5); +static SENSOR_DEVICE_ATTR_RO(in6_input, in_input, 6); +static SENSOR_DEVICE_ATTR_RW(in6_min, in_min, 6); +static SENSOR_DEVICE_ATTR_RW(in6_max, in_max, 6); +static SENSOR_DEVICE_ATTR_RO(in7_input, in_input, 7); +static SENSOR_DEVICE_ATTR_RW(in7_min, in_min, 7); +static SENSOR_DEVICE_ATTR_RW(in7_max, in_max, 7); +static SENSOR_DEVICE_ATTR_RO(in8_input, in_input, 8); +static SENSOR_DEVICE_ATTR_RW(in8_min, in_min, 8); +static SENSOR_DEVICE_ATTR_RW(in8_max, in_max, 8); /* use a different set of functions for in0 */ static ssize_t show_in_0(struct w83627hf_data *data, char *buf, u8 reg) @@ -661,7 +669,8 @@ static DEVICE_ATTR_RW(in0_min); static DEVICE_ATTR_RW(in0_max); static ssize_t -show_fan_input(struct device *dev, struct device_attribute *devattr, char *buf) +fan_input_show(struct device *dev, struct device_attribute *devattr, + char *buf) { int nr = to_sensor_dev_attr(devattr)->index; struct w83627hf_data *data = w83627hf_update_device(dev); @@ -669,7 +678,7 @@ show_fan_input(struct device *dev, struct device_attribute *devattr, char *buf) (long)DIV_FROM_REG(data->fan_div[nr]))); } static ssize_t -show_fan_min(struct device *dev, struct device_attribute *devattr, char *buf) +fan_min_show(struct device *dev, struct device_attribute *devattr, char *buf) { int nr = to_sensor_dev_attr(devattr)->index; struct w83627hf_data *data = w83627hf_update_device(dev); @@ -677,7 +686,7 @@ show_fan_min(struct device *dev, struct device_attribute *devattr, char *buf) (long)DIV_FROM_REG(data->fan_div[nr]))); } static ssize_t -store_fan_min(struct device *dev, struct device_attribute *devattr, +fan_min_store(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { int nr = to_sensor_dev_attr(devattr)->index; @@ -697,18 +706,16 @@ store_fan_min(struct device *dev, struct device_attribute *devattr, mutex_unlock(&data->update_lock); return count; } -#define sysfs_fan_decl(offset) \ -static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \ - show_fan_input, NULL, offset - 1); \ -static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ - show_fan_min, store_fan_min, offset - 1); -sysfs_fan_decl(1); -sysfs_fan_decl(2); -sysfs_fan_decl(3); +static SENSOR_DEVICE_ATTR_RO(fan1_input, fan_input, 0); +static SENSOR_DEVICE_ATTR_RW(fan1_min, fan_min, 0); +static SENSOR_DEVICE_ATTR_RO(fan2_input, fan_input, 1); +static SENSOR_DEVICE_ATTR_RW(fan2_min, fan_min, 1); +static SENSOR_DEVICE_ATTR_RO(fan3_input, fan_input, 2); +static SENSOR_DEVICE_ATTR_RW(fan3_min, fan_min, 2); static ssize_t -show_temp(struct device *dev, struct device_attribute *devattr, char *buf) +temp_show(struct device *dev, struct device_attribute *devattr, char *buf) { int nr = to_sensor_dev_attr(devattr)->index; struct w83627hf_data *data = w83627hf_update_device(dev); @@ -719,8 +726,7 @@ show_temp(struct device *dev, struct device_attribute *devattr, char *buf) } static ssize_t -show_temp_max(struct device *dev, struct device_attribute *devattr, - char *buf) +temp_max_show(struct device *dev, struct device_attribute *devattr, char *buf) { int nr = to_sensor_dev_attr(devattr)->index; struct w83627hf_data *data = w83627hf_update_device(dev); @@ -731,7 +737,7 @@ show_temp_max(struct device *dev, struct device_attribute *devattr, } static ssize_t -show_temp_max_hyst(struct device *dev, struct device_attribute *devattr, +temp_max_hyst_show(struct device *dev, struct device_attribute *devattr, char *buf) { int nr = to_sensor_dev_attr(devattr)->index; @@ -743,7 +749,7 @@ show_temp_max_hyst(struct device *dev, struct device_attribute *devattr, } static ssize_t -store_temp_max(struct device *dev, struct device_attribute *devattr, +temp_max_store(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { int nr = to_sensor_dev_attr(devattr)->index; @@ -765,7 +771,7 @@ store_temp_max(struct device *dev, struct device_attribute *devattr, } static ssize_t -store_temp_max_hyst(struct device *dev, struct device_attribute *devattr, +temp_max_hyst_store(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { int nr = to_sensor_dev_attr(devattr)->index; @@ -786,17 +792,15 @@ store_temp_max_hyst(struct device *dev, struct device_attribute *devattr, return count; } -#define sysfs_temp_decl(offset) \ -static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \ - show_temp, NULL, offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO|S_IWUSR, \ - show_temp_max, store_temp_max, offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO|S_IWUSR, \ - show_temp_max_hyst, store_temp_max_hyst, offset - 1); - -sysfs_temp_decl(1); -sysfs_temp_decl(2); -sysfs_temp_decl(3); +static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, 0); +static SENSOR_DEVICE_ATTR_RW(temp1_max, temp_max, 0); +static SENSOR_DEVICE_ATTR_RW(temp1_max_hyst, temp_max_hyst, 0); +static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, 1); +static SENSOR_DEVICE_ATTR_RW(temp2_max, temp_max, 1); +static SENSOR_DEVICE_ATTR_RW(temp2_max_hyst, temp_max_hyst, 1); +static SENSOR_DEVICE_ATTR_RO(temp3_input, temp, 2); +static SENSOR_DEVICE_ATTR_RW(temp3_max, temp_max, 2); +static SENSOR_DEVICE_ATTR_RW(temp3_max_hyst, temp_max_hyst, 2); static ssize_t cpu0_vid_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -841,27 +845,27 @@ alarms_show(struct device *dev, struct device_attribute *attr, char *buf) static DEVICE_ATTR_RO(alarms); static ssize_t -show_alarm(struct device *dev, struct device_attribute *attr, char *buf) +alarm_show(struct device *dev, struct device_attribute *attr, char *buf) { struct w83627hf_data *data = w83627hf_update_device(dev); int bitnr = to_sensor_dev_attr(attr)->index; return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1); } -static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0); -static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1); -static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2); -static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3); -static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8); -static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 9); -static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 10); -static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 16); -static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, 17); -static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6); -static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7); -static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 11); -static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4); -static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5); -static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 13); +static SENSOR_DEVICE_ATTR_RO(in0_alarm, alarm, 0); +static SENSOR_DEVICE_ATTR_RO(in1_alarm, alarm, 1); +static SENSOR_DEVICE_ATTR_RO(in2_alarm, alarm, 2); +static SENSOR_DEVICE_ATTR_RO(in3_alarm, alarm, 3); +static SENSOR_DEVICE_ATTR_RO(in4_alarm, alarm, 8); +static SENSOR_DEVICE_ATTR_RO(in5_alarm, alarm, 9); +static SENSOR_DEVICE_ATTR_RO(in6_alarm, alarm, 10); +static SENSOR_DEVICE_ATTR_RO(in7_alarm, alarm, 16); +static SENSOR_DEVICE_ATTR_RO(in8_alarm, alarm, 17); +static SENSOR_DEVICE_ATTR_RO(fan1_alarm, alarm, 6); +static SENSOR_DEVICE_ATTR_RO(fan2_alarm, alarm, 7); +static SENSOR_DEVICE_ATTR_RO(fan3_alarm, alarm, 11); +static SENSOR_DEVICE_ATTR_RO(temp1_alarm, alarm, 4); +static SENSOR_DEVICE_ATTR_RO(temp2_alarm, alarm, 5); +static SENSOR_DEVICE_ATTR_RO(temp3_alarm, alarm, 13); static ssize_t beep_mask_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -902,7 +906,7 @@ beep_mask_store(struct device *dev, struct device_attribute *attr, static DEVICE_ATTR_RW(beep_mask); static ssize_t -show_beep(struct device *dev, struct device_attribute *attr, char *buf) +beep_show(struct device *dev, struct device_attribute *attr, char *buf) { struct w83627hf_data *data = w83627hf_update_device(dev); int bitnr = to_sensor_dev_attr(attr)->index; @@ -910,8 +914,8 @@ show_beep(struct device *dev, struct device_attribute *attr, char *buf) } static ssize_t -store_beep(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +beep_store(struct device *dev, struct device_attribute *attr, const char *buf, + size_t count) { struct w83627hf_data *data = dev_get_drvdata(dev); int bitnr = to_sensor_dev_attr(attr)->index; @@ -959,41 +963,25 @@ store_beep(struct device *dev, struct device_attribute *attr, return count; } -static SENSOR_DEVICE_ATTR(in0_beep, S_IRUGO | S_IWUSR, - show_beep, store_beep, 0); -static SENSOR_DEVICE_ATTR(in1_beep, S_IRUGO | S_IWUSR, - show_beep, store_beep, 1); -static SENSOR_DEVICE_ATTR(in2_beep, S_IRUGO | S_IWUSR, - show_beep, store_beep, 2); -static SENSOR_DEVICE_ATTR(in3_beep, S_IRUGO | S_IWUSR, - show_beep, store_beep, 3); -static SENSOR_DEVICE_ATTR(in4_beep, S_IRUGO | S_IWUSR, - show_beep, store_beep, 8); -static SENSOR_DEVICE_ATTR(in5_beep, S_IRUGO | S_IWUSR, - show_beep, store_beep, 9); -static SENSOR_DEVICE_ATTR(in6_beep, S_IRUGO | S_IWUSR, - show_beep, store_beep, 10); -static SENSOR_DEVICE_ATTR(in7_beep, S_IRUGO | S_IWUSR, - show_beep, store_beep, 16); -static SENSOR_DEVICE_ATTR(in8_beep, S_IRUGO | S_IWUSR, - show_beep, store_beep, 17); -static SENSOR_DEVICE_ATTR(fan1_beep, S_IRUGO | S_IWUSR, - show_beep, store_beep, 6); -static SENSOR_DEVICE_ATTR(fan2_beep, S_IRUGO | S_IWUSR, - show_beep, store_beep, 7); -static SENSOR_DEVICE_ATTR(fan3_beep, S_IRUGO | S_IWUSR, - show_beep, store_beep, 11); -static SENSOR_DEVICE_ATTR(temp1_beep, S_IRUGO | S_IWUSR, - show_beep, store_beep, 4); -static SENSOR_DEVICE_ATTR(temp2_beep, S_IRUGO | S_IWUSR, - show_beep, store_beep, 5); -static SENSOR_DEVICE_ATTR(temp3_beep, S_IRUGO | S_IWUSR, - show_beep, store_beep, 13); -static SENSOR_DEVICE_ATTR(beep_enable, S_IRUGO | S_IWUSR, - show_beep, store_beep, 15); +static SENSOR_DEVICE_ATTR_RW(in0_beep, beep, 0); +static SENSOR_DEVICE_ATTR_RW(in1_beep, beep, 1); +static SENSOR_DEVICE_ATTR_RW(in2_beep, beep, 2); +static SENSOR_DEVICE_ATTR_RW(in3_beep, beep, 3); +static SENSOR_DEVICE_ATTR_RW(in4_beep, beep, 8); +static SENSOR_DEVICE_ATTR_RW(in5_beep, beep, 9); +static SENSOR_DEVICE_ATTR_RW(in6_beep, beep, 10); +static SENSOR_DEVICE_ATTR_RW(in7_beep, beep, 16); +static SENSOR_DEVICE_ATTR_RW(in8_beep, beep, 17); +static SENSOR_DEVICE_ATTR_RW(fan1_beep, beep, 6); +static SENSOR_DEVICE_ATTR_RW(fan2_beep, beep, 7); +static SENSOR_DEVICE_ATTR_RW(fan3_beep, beep, 11); +static SENSOR_DEVICE_ATTR_RW(temp1_beep, beep, 4); +static SENSOR_DEVICE_ATTR_RW(temp2_beep, beep, 5); +static SENSOR_DEVICE_ATTR_RW(temp3_beep, beep, 13); +static SENSOR_DEVICE_ATTR_RW(beep_enable, beep, 15); static ssize_t -show_fan_div(struct device *dev, struct device_attribute *devattr, char *buf) +fan_div_show(struct device *dev, struct device_attribute *devattr, char *buf) { int nr = to_sensor_dev_attr(devattr)->index; struct w83627hf_data *data = w83627hf_update_device(dev); @@ -1007,7 +995,7 @@ show_fan_div(struct device *dev, struct device_attribute *devattr, char *buf) * because the divisor changed. */ static ssize_t -store_fan_div(struct device *dev, struct device_attribute *devattr, +fan_div_store(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { int nr = to_sensor_dev_attr(devattr)->index; @@ -1047,15 +1035,12 @@ store_fan_div(struct device *dev, struct device_attribute *devattr, return count; } -static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO|S_IWUSR, - show_fan_div, store_fan_div, 0); -static SENSOR_DEVICE_ATTR(fan2_div, S_IRUGO|S_IWUSR, - show_fan_div, store_fan_div, 1); -static SENSOR_DEVICE_ATTR(fan3_div, S_IRUGO|S_IWUSR, - show_fan_div, store_fan_div, 2); +static SENSOR_DEVICE_ATTR_RW(fan1_div, fan_div, 0); +static SENSOR_DEVICE_ATTR_RW(fan2_div, fan_div, 1); +static SENSOR_DEVICE_ATTR_RW(fan3_div, fan_div, 2); static ssize_t -show_pwm(struct device *dev, struct device_attribute *devattr, char *buf) +pwm_show(struct device *dev, struct device_attribute *devattr, char *buf) { int nr = to_sensor_dev_attr(devattr)->index; struct w83627hf_data *data = w83627hf_update_device(dev); @@ -1063,7 +1048,7 @@ show_pwm(struct device *dev, struct device_attribute *devattr, char *buf) } static ssize_t -store_pwm(struct device *dev, struct device_attribute *devattr, +pwm_store(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { int nr = to_sensor_dev_attr(devattr)->index; @@ -1096,12 +1081,13 @@ store_pwm(struct device *dev, struct device_attribute *devattr, return count; } -static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0); -static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 1); -static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 2); +static SENSOR_DEVICE_ATTR_RW(pwm1, pwm, 0); +static SENSOR_DEVICE_ATTR_RW(pwm2, pwm, 1); +static SENSOR_DEVICE_ATTR_RW(pwm3, pwm, 2); static ssize_t -show_pwm_enable(struct device *dev, struct device_attribute *devattr, char *buf) +pwm_enable_show(struct device *dev, struct device_attribute *devattr, + char *buf) { int nr = to_sensor_dev_attr(devattr)->index; struct w83627hf_data *data = w83627hf_update_device(dev); @@ -1109,8 +1095,8 @@ show_pwm_enable(struct device *dev, struct device_attribute *devattr, char *buf) } static ssize_t -store_pwm_enable(struct device *dev, struct device_attribute *devattr, - const char *buf, size_t count) +pwm_enable_store(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) { int nr = to_sensor_dev_attr(devattr)->index; struct w83627hf_data *data = dev_get_drvdata(dev); @@ -1134,15 +1120,12 @@ store_pwm_enable(struct device *dev, struct device_attribute *devattr, return count; } -static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO|S_IWUSR, show_pwm_enable, - store_pwm_enable, 0); -static SENSOR_DEVICE_ATTR(pwm2_enable, S_IRUGO|S_IWUSR, show_pwm_enable, - store_pwm_enable, 1); -static SENSOR_DEVICE_ATTR(pwm3_enable, S_IRUGO|S_IWUSR, show_pwm_enable, - store_pwm_enable, 2); +static SENSOR_DEVICE_ATTR_RW(pwm1_enable, pwm_enable, 0); +static SENSOR_DEVICE_ATTR_RW(pwm2_enable, pwm_enable, 1); +static SENSOR_DEVICE_ATTR_RW(pwm3_enable, pwm_enable, 2); static ssize_t -show_pwm_freq(struct device *dev, struct device_attribute *devattr, char *buf) +pwm_freq_show(struct device *dev, struct device_attribute *devattr, char *buf) { int nr = to_sensor_dev_attr(devattr)->index; struct w83627hf_data *data = w83627hf_update_device(dev); @@ -1155,7 +1138,7 @@ show_pwm_freq(struct device *dev, struct device_attribute *devattr, char *buf) } static ssize_t -store_pwm_freq(struct device *dev, struct device_attribute *devattr, +pwm_freq_store(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { int nr = to_sensor_dev_attr(devattr)->index; @@ -1186,15 +1169,12 @@ store_pwm_freq(struct device *dev, struct device_attribute *devattr, return count; } -static SENSOR_DEVICE_ATTR(pwm1_freq, S_IRUGO|S_IWUSR, - show_pwm_freq, store_pwm_freq, 0); -static SENSOR_DEVICE_ATTR(pwm2_freq, S_IRUGO|S_IWUSR, - show_pwm_freq, store_pwm_freq, 1); -static SENSOR_DEVICE_ATTR(pwm3_freq, S_IRUGO|S_IWUSR, - show_pwm_freq, store_pwm_freq, 2); +static SENSOR_DEVICE_ATTR_RW(pwm1_freq, pwm_freq, 0); +static SENSOR_DEVICE_ATTR_RW(pwm2_freq, pwm_freq, 1); +static SENSOR_DEVICE_ATTR_RW(pwm3_freq, pwm_freq, 2); static ssize_t -show_temp_type(struct device *dev, struct device_attribute *devattr, +temp_type_show(struct device *dev, struct device_attribute *devattr, char *buf) { int nr = to_sensor_dev_attr(devattr)->index; @@ -1203,7 +1183,7 @@ show_temp_type(struct device *dev, struct device_attribute *devattr, } static ssize_t -store_temp_type(struct device *dev, struct device_attribute *devattr, +temp_type_store(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { int nr = to_sensor_dev_attr(devattr)->index; @@ -1258,13 +1238,9 @@ store_temp_type(struct device *dev, struct device_attribute *devattr, return count; } -#define sysfs_temp_type(offset) \ -static SENSOR_DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, \ - show_temp_type, store_temp_type, offset - 1); - -sysfs_temp_type(1); -sysfs_temp_type(2); -sysfs_temp_type(3); +static SENSOR_DEVICE_ATTR_RW(temp1_type, temp_type, 0); +static SENSOR_DEVICE_ATTR_RW(temp2_type, temp_type, 1); +static SENSOR_DEVICE_ATTR_RW(temp3_type, temp_type, 2); static ssize_t name_show(struct device *dev, struct device_attribute *devattr, char *buf) @@ -1595,7 +1571,6 @@ static int w83627hf_remove(struct platform_device *pdev) return 0; } - /* Registers 0x50-0x5f are banked */ static inline void w83627hf_set_bank(struct w83627hf_data *data, u16 reg) { From 19f7b17630f22213d6529ed4cfa728d98d039505 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 11 Mar 2019 10:15:45 -0700 Subject: [PATCH 072/125] hwmon: (adm1029) Use permission specific [SENSOR_][DEVICE_]ATTR variants Use [SENSOR_][DEVICE_]ATTR[_2]_{RO,RW,WO} to simplify the source code, to improve readbility, and to reduce the chance of inconsistencies. Also replace any remaining S_ in the driver with octal values. The conversion was done automatically with coccinelle. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches/. This patch does not introduce functional changes. It was verified by compiling the old and new files and comparing text and data sizes. Cc: Corentin Labbe Signed-off-by: Guenter Roeck --- drivers/hwmon/adm1029.c | 41 +++++++++++++++++++++-------------------- 1 file changed, 21 insertions(+), 20 deletions(-) diff --git a/drivers/hwmon/adm1029.c b/drivers/hwmon/adm1029.c index e561279aea21..388060ff85e7 100644 --- a/drivers/hwmon/adm1029.c +++ b/drivers/hwmon/adm1029.c @@ -166,7 +166,7 @@ static struct adm1029_data *adm1029_update_device(struct device *dev) */ static ssize_t -show_temp(struct device *dev, struct device_attribute *devattr, char *buf) +temp_show(struct device *dev, struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct adm1029_data *data = adm1029_update_device(dev); @@ -175,7 +175,7 @@ show_temp(struct device *dev, struct device_attribute *devattr, char *buf) } static ssize_t -show_fan(struct device *dev, struct device_attribute *devattr, char *buf) +fan_show(struct device *dev, struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct adm1029_data *data = adm1029_update_device(dev); @@ -193,7 +193,7 @@ show_fan(struct device *dev, struct device_attribute *devattr, char *buf) } static ssize_t -show_fan_div(struct device *dev, struct device_attribute *devattr, char *buf) +fan_div_show(struct device *dev, struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct adm1029_data *data = adm1029_update_device(dev); @@ -203,8 +203,9 @@ show_fan_div(struct device *dev, struct device_attribute *devattr, char *buf) return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[attr->index])); } -static ssize_t set_fan_div(struct device *dev, struct device_attribute *devattr, - const char *buf, size_t count) +static ssize_t fan_div_store(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) { struct adm1029_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; @@ -254,26 +255,26 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *devattr, } /* Access rights on sysfs. */ -static SENSOR_DEVICE_ATTR(temp1_input, 0444, show_temp, NULL, 0); -static SENSOR_DEVICE_ATTR(temp2_input, 0444, show_temp, NULL, 1); -static SENSOR_DEVICE_ATTR(temp3_input, 0444, show_temp, NULL, 2); +static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, 0); +static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, 1); +static SENSOR_DEVICE_ATTR_RO(temp3_input, temp, 2); -static SENSOR_DEVICE_ATTR(temp1_max, 0444, show_temp, NULL, 3); -static SENSOR_DEVICE_ATTR(temp2_max, 0444, show_temp, NULL, 4); -static SENSOR_DEVICE_ATTR(temp3_max, 0444, show_temp, NULL, 5); +static SENSOR_DEVICE_ATTR_RO(temp1_max, temp, 3); +static SENSOR_DEVICE_ATTR_RO(temp2_max, temp, 4); +static SENSOR_DEVICE_ATTR_RO(temp3_max, temp, 5); -static SENSOR_DEVICE_ATTR(temp1_min, 0444, show_temp, NULL, 6); -static SENSOR_DEVICE_ATTR(temp2_min, 0444, show_temp, NULL, 7); -static SENSOR_DEVICE_ATTR(temp3_min, 0444, show_temp, NULL, 8); +static SENSOR_DEVICE_ATTR_RO(temp1_min, temp, 6); +static SENSOR_DEVICE_ATTR_RO(temp2_min, temp, 7); +static SENSOR_DEVICE_ATTR_RO(temp3_min, temp, 8); -static SENSOR_DEVICE_ATTR(fan1_input, 0444, show_fan, NULL, 0); -static SENSOR_DEVICE_ATTR(fan2_input, 0444, show_fan, NULL, 1); +static SENSOR_DEVICE_ATTR_RO(fan1_input, fan, 0); +static SENSOR_DEVICE_ATTR_RO(fan2_input, fan, 1); -static SENSOR_DEVICE_ATTR(fan1_min, 0444, show_fan, NULL, 2); -static SENSOR_DEVICE_ATTR(fan2_min, 0444, show_fan, NULL, 3); +static SENSOR_DEVICE_ATTR_RO(fan1_min, fan, 2); +static SENSOR_DEVICE_ATTR_RO(fan2_min, fan, 3); -static SENSOR_DEVICE_ATTR(fan1_div, 0644, show_fan_div, set_fan_div, 0); -static SENSOR_DEVICE_ATTR(fan2_div, 0644, show_fan_div, set_fan_div, 1); +static SENSOR_DEVICE_ATTR_RW(fan1_div, fan_div, 0); +static SENSOR_DEVICE_ATTR_RW(fan2_div, fan_div, 1); static struct attribute *adm1029_attrs[] = { &sensor_dev_attr_temp1_input.dev_attr.attr, From d6410408ad2a798c4cc685252c1baa713be0ad69 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 4 Apr 2019 11:28:37 -0700 Subject: [PATCH 073/125] hwmon: (smsc47m1) Use request_muxed_region for Super-IO accesses Super-IO accesses may fail on a system with no or unmapped LPC bus. Also, other drivers may attempt to access the LPC bus at the same time, resulting in undefined behavior. Use request_muxed_region() to ensure that IO access on the requested address space is supported, and to ensure that access by multiple drivers is synchronized. Fixes: 8d5d45fb1468 ("I2C: Move hwmon drivers (2/3)") Reported-by: Kefeng Wang Reported-by: John Garry Cc: John Garry Acked-by: John Garry Signed-off-by: Guenter Roeck --- drivers/hwmon/smsc47m1.c | 28 +++++++++++++++++++--------- 1 file changed, 19 insertions(+), 9 deletions(-) diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c index 5d0c6eaae6f2..5f92eab24c62 100644 --- a/drivers/hwmon/smsc47m1.c +++ b/drivers/hwmon/smsc47m1.c @@ -73,16 +73,21 @@ superio_inb(int reg) /* logical device for fans is 0x0A */ #define superio_select() superio_outb(0x07, 0x0A) -static inline void +static inline int superio_enter(void) { + if (!request_muxed_region(REG, 2, DRVNAME)) + return -EBUSY; + outb(0x55, REG); + return 0; } static inline void superio_exit(void) { outb(0xAA, REG); + release_region(REG, 2); } #define SUPERIO_REG_ACT 0x30 @@ -535,8 +540,12 @@ static int __init smsc47m1_find(struct smsc47m1_sio_data *sio_data) { u8 val; unsigned short addr; + int err; + + err = superio_enter(); + if (err) + return err; - superio_enter(); val = force_id ? force_id : superio_inb(SUPERIO_REG_DEVID); /* @@ -612,13 +621,14 @@ static int __init smsc47m1_find(struct smsc47m1_sio_data *sio_data) static void smsc47m1_restore(const struct smsc47m1_sio_data *sio_data) { if ((sio_data->activate & 0x01) == 0) { - superio_enter(); - superio_select(); - - pr_info("Disabling device\n"); - superio_outb(SUPERIO_REG_ACT, sio_data->activate); - - superio_exit(); + if (!superio_enter()) { + superio_select(); + pr_info("Disabling device\n"); + superio_outb(SUPERIO_REG_ACT, sio_data->activate); + superio_exit(); + } else { + pr_warn("Failed to disable device\n"); + } } } From e95fd518d05bfc087da6fcdea4900a57cfb083bd Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Fri, 5 Apr 2019 08:44:41 -0700 Subject: [PATCH 074/125] hwmon: (w83627hf) Use request_muxed_region for Super-IO accesses Super-IO accesses may fail on a system with no or unmapped LPC bus. Also, other drivers may attempt to access the LPC bus at the same time, resulting in undefined behavior. Use request_muxed_region() to ensure that IO access on the requested address space is supported, and to ensure that access by multiple drivers is synchronized. Fixes: b72656dbc491 ("hwmon: (w83627hf) Stop using globals for I/O port numbers") Signed-off-by: Guenter Roeck --- drivers/hwmon/w83627hf.c | 42 +++++++++++++++++++++++++++++++++++----- 1 file changed, 37 insertions(+), 5 deletions(-) diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index 97bbf1af11e8..7ca53a28c305 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -130,17 +130,23 @@ superio_select(struct w83627hf_sio_data *sio, int ld) outb(ld, sio->sioaddr + 1); } -static inline void +static inline int superio_enter(struct w83627hf_sio_data *sio) { + if (!request_muxed_region(sio->sioaddr, 2, DRVNAME)) + return -EBUSY; + outb(0x87, sio->sioaddr); outb(0x87, sio->sioaddr); + + return 0; } static inline void superio_exit(struct w83627hf_sio_data *sio) { outb(0xAA, sio->sioaddr); + release_region(sio->sioaddr, 2); } #define W627_DEVID 0x52 @@ -1254,7 +1260,7 @@ static DEVICE_ATTR_RO(name); static int __init w83627hf_find(int sioaddr, unsigned short *addr, struct w83627hf_sio_data *sio_data) { - int err = -ENODEV; + int err; u16 val; static __initconst char *const names[] = { @@ -1266,7 +1272,11 @@ static int __init w83627hf_find(int sioaddr, unsigned short *addr, }; sio_data->sioaddr = sioaddr; - superio_enter(sio_data); + err = superio_enter(sio_data); + if (err) + return err; + + err = -ENODEV; val = force_id ? force_id : superio_inb(sio_data, DEVID); switch (val) { case W627_DEVID: @@ -1619,9 +1629,21 @@ static int w83627thf_read_gpio5(struct platform_device *pdev) struct w83627hf_sio_data *sio_data = dev_get_platdata(&pdev->dev); int res = 0xff, sel; - superio_enter(sio_data); + if (superio_enter(sio_data)) { + /* + * Some other driver reserved the address space for itself. + * We don't want to fail driver instantiation because of that, + * so display a warning and keep going. + */ + dev_warn(&pdev->dev, + "Can not read VID data: Failed to enable SuperIO access\n"); + return res; + } + superio_select(sio_data, W83627HF_LD_GPIO5); + res = 0xff; + /* Make sure these GPIO pins are enabled */ if (!(superio_inb(sio_data, W83627THF_GPIO5_EN) & (1<<3))) { dev_dbg(&pdev->dev, "GPIO5 disabled, no VID function\n"); @@ -1652,7 +1674,17 @@ static int w83687thf_read_vid(struct platform_device *pdev) struct w83627hf_sio_data *sio_data = dev_get_platdata(&pdev->dev); int res = 0xff; - superio_enter(sio_data); + if (superio_enter(sio_data)) { + /* + * Some other driver reserved the address space for itself. + * We don't want to fail driver instantiation because of that, + * so display a warning and keep going. + */ + dev_warn(&pdev->dev, + "Can not read VID data: Failed to enable SuperIO access\n"); + return res; + } + superio_select(sio_data, W83627HF_LD_HWM); /* Make sure these GPIO pins are enabled */ From 14b97ba5c20056102b3dd22696bf17b057e60976 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Fri, 5 Apr 2019 08:53:08 -0700 Subject: [PATCH 075/125] hwmon: (vt1211) Use request_muxed_region for Super-IO accesses Super-IO accesses may fail on a system with no or unmapped LPC bus. Also, other drivers may attempt to access the LPC bus at the same time, resulting in undefined behavior. Use request_muxed_region() to ensure that IO access on the requested address space is supported, and to ensure that access by multiple drivers is synchronized. Fixes: 2219cd81a6cd ("hwmon/vt1211: Add probing of alternate config index port") Signed-off-by: Guenter Roeck --- drivers/hwmon/vt1211.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/hwmon/vt1211.c b/drivers/hwmon/vt1211.c index 3a6bfa51cb94..95d5e8ec8b7f 100644 --- a/drivers/hwmon/vt1211.c +++ b/drivers/hwmon/vt1211.c @@ -226,15 +226,21 @@ static inline void superio_select(int sio_cip, int ldn) outb(ldn, sio_cip + 1); } -static inline void superio_enter(int sio_cip) +static inline int superio_enter(int sio_cip) { + if (!request_muxed_region(sio_cip, 2, DRVNAME)) + return -EBUSY; + outb(0x87, sio_cip); outb(0x87, sio_cip); + + return 0; } static inline void superio_exit(int sio_cip) { outb(0xaa, sio_cip); + release_region(sio_cip, 2); } /* --------------------------------------------------------------------- @@ -1282,11 +1288,14 @@ EXIT: static int __init vt1211_find(int sio_cip, unsigned short *address) { - int err = -ENODEV; + int err; int devid; - superio_enter(sio_cip); + err = superio_enter(sio_cip); + if (err) + return err; + err = -ENODEV; devid = force_id ? force_id : superio_inb(sio_cip, SIO_VT1211_DEVID); if (devid != SIO_VT1211_ID) goto EXIT; From 5679ed99065372bc62c57a895950914e1c0fb9e0 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 10 Apr 2019 12:47:26 +0200 Subject: [PATCH 076/125] hwmon: (occ) Move common code to a separate module Instead of duplicating the common code into the 2 (binary) drivers, move the common code to a separate module. This is cleaner. Signed-off-by: Jean Delvare Cc: Eddie James Cc: Guenter Roeck Reviewed-by: Eddie James Tested-by: Eddie James Signed-off-by: Guenter Roeck --- drivers/hwmon/occ/Kconfig | 3 +-- drivers/hwmon/occ/Makefile | 6 ++++-- drivers/hwmon/occ/common.c | 7 +++++++ drivers/hwmon/occ/sysfs.c | 2 ++ 4 files changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/hwmon/occ/Kconfig b/drivers/hwmon/occ/Kconfig index 66686628fb53..9373945f6dc4 100644 --- a/drivers/hwmon/occ/Kconfig +++ b/drivers/hwmon/occ/Kconfig @@ -27,5 +27,4 @@ config SENSORS_OCC_P9_SBE called occ-p9-hwmon. config SENSORS_OCC - bool "POWER On-Chip Controller" - depends on SENSORS_OCC_P8_I2C || SENSORS_OCC_P9_SBE + tristate diff --git a/drivers/hwmon/occ/Makefile b/drivers/hwmon/occ/Makefile index 3fec12ddc7e7..493588d5a9d3 100644 --- a/drivers/hwmon/occ/Makefile +++ b/drivers/hwmon/occ/Makefile @@ -1,5 +1,7 @@ -occ-p8-hwmon-objs := common.o sysfs.o p8_i2c.o -occ-p9-hwmon-objs := common.o sysfs.o p9_sbe.o +occ-hwmon-common-objs := common.o sysfs.o +occ-p8-hwmon-objs := p8_i2c.o +occ-p9-hwmon-objs := p9_sbe.o +obj-$(CONFIG_SENSORS_OCC) += occ-hwmon-common.o obj-$(CONFIG_SENSORS_OCC_P8_I2C) += occ-p8-hwmon.o obj-$(CONFIG_SENSORS_OCC_P9_SBE) += occ-p9-hwmon.o diff --git a/drivers/hwmon/occ/common.c b/drivers/hwmon/occ/common.c index 4679acb4918e..9d197e9d47c0 100644 --- a/drivers/hwmon/occ/common.c +++ b/drivers/hwmon/occ/common.c @@ -2,11 +2,13 @@ // Copyright IBM Corp 2019 #include +#include #include #include #include #include #include +#include #include #include #include @@ -1099,3 +1101,8 @@ int occ_setup(struct occ *occ, const char *name) return rc; } +EXPORT_SYMBOL_GPL(occ_setup); + +MODULE_AUTHOR("Eddie James "); +MODULE_DESCRIPTION("Common OCC hwmon code"); +MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/occ/sysfs.c b/drivers/hwmon/occ/sysfs.c index a71ca94c789f..1cb1e65d086a 100644 --- a/drivers/hwmon/occ/sysfs.c +++ b/drivers/hwmon/occ/sysfs.c @@ -3,6 +3,7 @@ #include #include +#include #include #include #include @@ -177,3 +178,4 @@ void occ_shutdown(struct occ *occ) { sysfs_remove_group(&occ->bus_dev->kobj, &occ_sysfs); } +EXPORT_SYMBOL_GPL(occ_shutdown); From c112d75840fb23e481f3d0db5c8e830391664078 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 10 Apr 2019 12:56:35 +0200 Subject: [PATCH 077/125] hwmon: OCC drivers are ARM-only These drivers are for a BMC inside PowerPC servers. The BMC runs on ARM hardware, so only propose the drivers on this architecture, unless build-testing. Signed-off-by: Jean Delvare Cc: Eddie James Cc: Guenter Roeck Reviewed-by: Eddie James Signed-off-by: Guenter Roeck --- drivers/hwmon/occ/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/hwmon/occ/Kconfig b/drivers/hwmon/occ/Kconfig index 9373945f6dc4..2a3869f15026 100644 --- a/drivers/hwmon/occ/Kconfig +++ b/drivers/hwmon/occ/Kconfig @@ -5,6 +5,7 @@ config SENSORS_OCC_P8_I2C tristate "POWER8 OCC through I2C" depends on I2C + depends on ARM || ARM64 || COMPILE_TEST select SENSORS_OCC help This option enables support for monitoring sensors provided by the @@ -17,6 +18,7 @@ config SENSORS_OCC_P8_I2C config SENSORS_OCC_P9_SBE tristate "POWER9 OCC through SBE" depends on FSI_OCC + depends on ARM || ARM64 || COMPILE_TEST select SENSORS_OCC help This option enables support for monitoring sensors provided by the From c7366e951469b542fa16ca94ac6d09ac2206d11a Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Thu, 11 Apr 2019 15:30:09 +0200 Subject: [PATCH 078/125] dt-bindings: hwmon: (pwm-fan) Add tachometer interrupt This adds the tachometer interrupt to the pwm-fan binding, which is necessary for RPM support. Signed-off-by: Stefan Wahren Reviewed-by: Rob Herring Reviewed-by: Robin Murphy Signed-off-by: Guenter Roeck --- .../devicetree/bindings/hwmon/pwm-fan.txt | 21 ++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt index 49ca5d83ed13..6ced829b0e58 100644 --- a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt +++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt @@ -7,7 +7,16 @@ Required properties: which correspond to thermal cooling states Optional properties: -- fan-supply : phandle to the regulator that provides power to the fan +- fan-supply : phandle to the regulator that provides power to the fan +- interrupts : This contains a single interrupt specifier which + describes the tachometer output of the fan as an + interrupt source. The output signal must generate a + defined number of interrupts per fan revolution, which + require that it must be self resetting edge interrupts. + See interrupt-controller/interrupts.txt for the format. +- pulses-per-revolution : define the tachometer pulses per fan revolution as + an integer (default is 2 interrupts per revolution). + The value must be greater than zero. Example: fan0: pwm-fan { @@ -38,3 +47,13 @@ Example: }; }; }; + +Example 2: + fan0: pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm 0 40000 0>; + fan-supply = <®_fan>; + interrupt-parent = <&gpio5>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + pulses-per-revolution = <2>; + }; From 285d7483aa3323c90891e26b73a0c9d9cc5f53e4 Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Thu, 11 Apr 2019 15:30:10 +0200 Subject: [PATCH 079/125] Documentation: pwm-fan: Add description for RPM support This adds a short description for the new RPM support of the pwm-fan driver. Signed-off-by: Stefan Wahren Reviewed-by: Robin Murphy Signed-off-by: Guenter Roeck --- Documentation/hwmon/pwm-fan | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/hwmon/pwm-fan b/Documentation/hwmon/pwm-fan index 18529d2e3bcf..82fe96742fee 100644 --- a/Documentation/hwmon/pwm-fan +++ b/Documentation/hwmon/pwm-fan @@ -15,3 +15,6 @@ The driver implements a simple interface for driving a fan connected to a PWM output. It uses the generic PWM interface, thus it can be used with a range of SoCs. The driver exposes the fan to the user space through the hwmon's sysfs interface. + +The fan rotation speed returned via the optional 'fan1_input' is extrapolated +from the sampled interrupts from the tachometer signal within 1 second. From 6b1ec4789fb17890a7f95e72670a9393fd9f8c8f Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Thu, 11 Apr 2019 15:30:11 +0200 Subject: [PATCH 080/125] hwmon: (pwm-fan) Add RPM support via external interrupt This adds RPM support to the pwm-fan driver in order to use with fancontrol/pwmconfig. This feature is intended for fans with a tachometer output signal, which generate a defined number of pulses per revolution. Signed-off-by: Stefan Wahren Reviewed-by: Robin Murphy Signed-off-by: Robin Murphy [groeck: Drop unused 'devattr' variable] Signed-off-by: Guenter Roeck --- drivers/hwmon/pwm-fan.c | 105 ++++++++++++++++++++++++++++++++++++++-- 1 file changed, 101 insertions(+), 4 deletions(-) diff --git a/drivers/hwmon/pwm-fan.c b/drivers/hwmon/pwm-fan.c index e4c5197417a8..285ec3abb85e 100644 --- a/drivers/hwmon/pwm-fan.c +++ b/drivers/hwmon/pwm-fan.c @@ -18,6 +18,7 @@ #include #include +#include #include #include #include @@ -26,6 +27,7 @@ #include #include #include +#include #define MAX_PWM 255 @@ -33,6 +35,14 @@ struct pwm_fan_ctx { struct mutex lock; struct pwm_device *pwm; struct regulator *reg_en; + + int irq; + atomic_t pulses; + unsigned int rpm; + u8 pulses_per_revolution; + ktime_t sample_start; + struct timer_list rpm_timer; + unsigned int pwm_value; unsigned int pwm_fan_state; unsigned int pwm_fan_max_state; @@ -40,6 +50,32 @@ struct pwm_fan_ctx { struct thermal_cooling_device *cdev; }; +/* This handler assumes self resetting edge triggered interrupt. */ +static irqreturn_t pulse_handler(int irq, void *dev_id) +{ + struct pwm_fan_ctx *ctx = dev_id; + + atomic_inc(&ctx->pulses); + + return IRQ_HANDLED; +} + +static void sample_timer(struct timer_list *t) +{ + struct pwm_fan_ctx *ctx = from_timer(ctx, t, rpm_timer); + int pulses; + u64 tmp; + + pulses = atomic_read(&ctx->pulses); + atomic_sub(pulses, &ctx->pulses); + tmp = (u64)pulses * ktime_ms_delta(ktime_get(), ctx->sample_start) * 60; + do_div(tmp, ctx->pulses_per_revolution * 1000); + ctx->rpm = tmp; + + ctx->sample_start = ktime_get(); + mod_timer(&ctx->rpm_timer, jiffies + HZ); +} + static int __set_pwm(struct pwm_fan_ctx *ctx, unsigned long pwm) { unsigned long period; @@ -100,15 +136,45 @@ static ssize_t pwm_show(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%u\n", ctx->pwm_value); } +static ssize_t rpm_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct pwm_fan_ctx *ctx = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", ctx->rpm); +} static SENSOR_DEVICE_ATTR_RW(pwm1, pwm, 0); +static SENSOR_DEVICE_ATTR_RO(fan1_input, rpm, 0); static struct attribute *pwm_fan_attrs[] = { &sensor_dev_attr_pwm1.dev_attr.attr, + &sensor_dev_attr_fan1_input.dev_attr.attr, NULL, }; -ATTRIBUTE_GROUPS(pwm_fan); +static umode_t pwm_fan_attrs_visible(struct kobject *kobj, struct attribute *a, + int n) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct pwm_fan_ctx *ctx = dev_get_drvdata(dev); + + /* Hide fan_input in case no interrupt is available */ + if (n == 1 && ctx->irq <= 0) + return 0; + + return a->mode; +} + +static const struct attribute_group pwm_fan_group = { + .attrs = pwm_fan_attrs, + .is_visible = pwm_fan_attrs_visible, +}; + +static const struct attribute_group *pwm_fan_groups[] = { + &pwm_fan_group, + NULL, +}; /* thermal cooling device callbacks */ static int pwm_fan_get_max_state(struct thermal_cooling_device *cdev, @@ -214,6 +280,7 @@ static int pwm_fan_probe(struct platform_device *pdev) struct device *hwmon; int ret; struct pwm_state state = { }; + u32 ppr = 2; ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); if (!ctx) @@ -233,6 +300,10 @@ static int pwm_fan_probe(struct platform_device *pdev) platform_set_drvdata(pdev, ctx); + ctx->irq = platform_get_irq(pdev, 0); + if (ctx->irq == -EPROBE_DEFER) + return ctx->irq; + ctx->reg_en = devm_regulator_get_optional(&pdev->dev, "fan"); if (IS_ERR(ctx->reg_en)) { if (PTR_ERR(ctx->reg_en) != -ENODEV) @@ -261,17 +332,38 @@ static int pwm_fan_probe(struct platform_device *pdev) goto err_reg_disable; } + timer_setup(&ctx->rpm_timer, sample_timer, 0); + + of_property_read_u32(pdev->dev.of_node, "pulses-per-revolution", &ppr); + ctx->pulses_per_revolution = ppr; + if (!ctx->pulses_per_revolution) { + dev_err(&pdev->dev, "pulses-per-revolution can't be zero.\n"); + ret = -EINVAL; + goto err_pwm_disable; + } + + if (ctx->irq > 0) { + ret = devm_request_irq(&pdev->dev, ctx->irq, pulse_handler, 0, + pdev->name, ctx); + if (ret) { + dev_err(&pdev->dev, "Can't get interrupt working.\n"); + goto err_pwm_disable; + } + ctx->sample_start = ktime_get(); + mod_timer(&ctx->rpm_timer, jiffies + HZ); + } + hwmon = devm_hwmon_device_register_with_groups(&pdev->dev, "pwmfan", ctx, pwm_fan_groups); if (IS_ERR(hwmon)) { dev_err(&pdev->dev, "Failed to register hwmon device\n"); ret = PTR_ERR(hwmon); - goto err_pwm_disable; + goto err_del_timer; } ret = pwm_fan_of_get_cooling_data(&pdev->dev, ctx); if (ret) - goto err_pwm_disable; + goto err_del_timer; ctx->pwm_fan_state = ctx->pwm_fan_max_state; if (IS_ENABLED(CONFIG_THERMAL)) { @@ -282,7 +374,7 @@ static int pwm_fan_probe(struct platform_device *pdev) dev_err(&pdev->dev, "Failed to register pwm-fan as cooling device"); ret = PTR_ERR(cdev); - goto err_pwm_disable; + goto err_del_timer; } ctx->cdev = cdev; thermal_cdev_update(cdev); @@ -290,6 +382,9 @@ static int pwm_fan_probe(struct platform_device *pdev) return 0; +err_del_timer: + del_timer_sync(&ctx->rpm_timer); + err_pwm_disable: state.enabled = false; pwm_apply_state(ctx->pwm, &state); @@ -306,6 +401,8 @@ static int pwm_fan_remove(struct platform_device *pdev) struct pwm_fan_ctx *ctx = platform_get_drvdata(pdev); thermal_cooling_device_unregister(ctx->cdev); + del_timer_sync(&ctx->rpm_timer); + if (ctx->pwm_value) pwm_disable(ctx->pwm); From 841cf6767bf6eb047fb8ede6c2a2d50976ec5ec9 Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Fri, 12 Apr 2019 15:05:23 +0100 Subject: [PATCH 081/125] hwmon: (pwm-fan) Report probe errors consistently Printing the error code for a failure provides a head-start for debugging, since it's often sufficient to pinpoint the origin of the failure. We already do this for some probe-failure messages, so let's make the rest of them consistent. Signed-off-by: Robin Murphy Signed-off-by: Guenter Roeck --- drivers/hwmon/pwm-fan.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/hwmon/pwm-fan.c b/drivers/hwmon/pwm-fan.c index 285ec3abb85e..eead8afe6447 100644 --- a/drivers/hwmon/pwm-fan.c +++ b/drivers/hwmon/pwm-fan.c @@ -328,7 +328,7 @@ static int pwm_fan_probe(struct platform_device *pdev) ret = pwm_apply_state(ctx->pwm, &state); if (ret) { - dev_err(&pdev->dev, "Failed to configure PWM\n"); + dev_err(&pdev->dev, "Failed to configure PWM: %d\n", ret); goto err_reg_disable; } @@ -346,7 +346,8 @@ static int pwm_fan_probe(struct platform_device *pdev) ret = devm_request_irq(&pdev->dev, ctx->irq, pulse_handler, 0, pdev->name, ctx); if (ret) { - dev_err(&pdev->dev, "Can't get interrupt working.\n"); + dev_err(&pdev->dev, + "Failed to request interrupt: %d\n", ret); goto err_pwm_disable; } ctx->sample_start = ktime_get(); @@ -356,8 +357,9 @@ static int pwm_fan_probe(struct platform_device *pdev) hwmon = devm_hwmon_device_register_with_groups(&pdev->dev, "pwmfan", ctx, pwm_fan_groups); if (IS_ERR(hwmon)) { - dev_err(&pdev->dev, "Failed to register hwmon device\n"); ret = PTR_ERR(hwmon); + dev_err(&pdev->dev, + "Failed to register hwmon device: %d\n", ret); goto err_del_timer; } @@ -371,9 +373,10 @@ static int pwm_fan_probe(struct platform_device *pdev) "pwm-fan", ctx, &pwm_fan_cooling_ops); if (IS_ERR(cdev)) { - dev_err(&pdev->dev, - "Failed to register pwm-fan as cooling device"); ret = PTR_ERR(cdev); + dev_err(&pdev->dev, + "Failed to register pwm-fan as cooling device: %d\n", + ret); goto err_del_timer; } ctx->cdev = cdev; From c49b7b3981f5c39b9b50dc65e32d3c6a553825de Mon Sep 17 00:00:00 2001 From: Patrick Venture Date: Fri, 12 Apr 2019 09:27:42 -0700 Subject: [PATCH 082/125] hwmon: (ir35221) fix company name Fix the company name from "Infinion" to "Infineon." Signed-off-by: Patrick Venture Signed-off-by: Guenter Roeck --- Documentation/hwmon/ir35221 | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/hwmon/ir35221 b/Documentation/hwmon/ir35221 index f7e112752c04..3e82f3d93f44 100644 --- a/Documentation/hwmon/ir35221 +++ b/Documentation/hwmon/ir35221 @@ -2,7 +2,7 @@ Kernel driver ir35221 ===================== Supported chips: - * Infinion IR35221 + * Infineon IR35221 Prefix: 'ir35221' Addresses scanned: - Datasheet: Datasheet is not publicly available. From 00669d196c616c0a9970a3a9ee66efab6868df0c Mon Sep 17 00:00:00 2001 From: Maxim Sloyko Date: Fri, 12 Apr 2019 13:37:56 -0700 Subject: [PATCH 083/125] hwmon: (pmbus/ir38064) Add driver for Infineon IR38064 Voltage Regulator Add the pmbus driver for the Infineon ir38064 voltage regulator. VOUT_MODE is not supported by the device. The driver fakes linear16 mode with exponent value -8. The device supports VOUT_PEAK, IOUT_PEAK, and TEMPERATURE_PEAK, however this driver does not enable them. Signed-off-by: Maxim Sloyko Signed-off-by: Patrick Venture Signed-off-by: Guenter Roeck --- Documentation/hwmon/ir38064 | 64 ++++++++++++++++++++++++++++++++++ drivers/hwmon/pmbus/Kconfig | 9 +++++ drivers/hwmon/pmbus/Makefile | 1 + drivers/hwmon/pmbus/ir38064.c | 65 +++++++++++++++++++++++++++++++++++ 4 files changed, 139 insertions(+) create mode 100644 Documentation/hwmon/ir38064 create mode 100644 drivers/hwmon/pmbus/ir38064.c diff --git a/Documentation/hwmon/ir38064 b/Documentation/hwmon/ir38064 new file mode 100644 index 000000000000..c3697d7aaaa4 --- /dev/null +++ b/Documentation/hwmon/ir38064 @@ -0,0 +1,64 @@ +Kernel driver ir38064 +===================== + +Supported chips: + * Infineon IR38064 + Prefix: 'ir38064' + Addresses scanned: - + Datasheet: Publicly available at the Infineon webiste + https://www.infineon.com/dgdl/Infineon-IR38064MTRPBF-DS-v03_07-EN.pdf?fileId=5546d462584d1d4a0158db0d9efb67ca + +Datasheet is not publicly available. + + +Authors: + Maxim Sloyko + Patrick Venture + +Description +----------- + +IR38064 is a Single-input Voltage, Synchronous Buck Regulator, DC-DC Converter. + +Usage Notes +----------- + +This driver does not probe for PMBus devices. You will have to instantiate +devices explicitly. + +Sysfs attributes +---------------- + +curr1_label "iout1" +curr1_input Measured output current +curr1_crit Critical maximum current +curr1_crit_alarm Current critical high alarm +curr1_max Maximum current +curr1_max_alarm Current high alarm + +in1_label "vin" +in1_input Measured input voltage +in1_crit Critical maximum input voltage +in1_crit_alarm Input voltage critical high alarm +in1_min Minimum input voltage +in1_min_alarm Input voltage low alarm + +in2_label "vout1" +in2_input Measured output voltage +in2_lcrit Critical minimum output voltage +in2_lcrit_alarm Output voltage critical low alarm +in2_crit Critical maximum output voltage +in2_crit_alarm Output voltage critical high alarm +in2_max Maximum output voltage +in2_max_alarm Output voltage high alarm +in2_min Minimum output voltage +in2_min_alarm Output voltage low alarm + +power1_label "pout1" +power1_input Measured output power + +temp1_input Measured temperature +temp1_crit Critical high temperature +temp1_crit_alarm Chip temperature critical high alarm +temp1_max Maximum temperature +temp1_max_alarm Chip temperature high alarm diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index 629cb45f8557..de87abab990e 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -54,6 +54,15 @@ config SENSORS_IR35221 This driver can also be built as a module. If so, the module will be called ir35521. +config SENSORS_IR38064 + tristate "Infineon IR38064" + help + If you say yes here you get hardware monitoring support for Infineon + IR38064. + + This driver can also be built as a module. If so, the module will + be called ir38064. + config SENSORS_LM25066 tristate "National Semiconductor LM25066 and compatibles" help diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile index ea0e39518c21..7d1fa6b3c8c9 100644 --- a/drivers/hwmon/pmbus/Makefile +++ b/drivers/hwmon/pmbus/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o obj-$(CONFIG_SENSORS_IBM_CFFPS) += ibm-cffps.o obj-$(CONFIG_SENSORS_IR35221) += ir35221.o +obj-$(CONFIG_SENSORS_IR38064) += ir38064.o obj-$(CONFIG_SENSORS_LM25066) += lm25066.o obj-$(CONFIG_SENSORS_LTC2978) += ltc2978.o obj-$(CONFIG_SENSORS_LTC3815) += ltc3815.o diff --git a/drivers/hwmon/pmbus/ir38064.c b/drivers/hwmon/pmbus/ir38064.c new file mode 100644 index 000000000000..1820f5077f66 --- /dev/null +++ b/drivers/hwmon/pmbus/ir38064.c @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Hardware monitoring driver for Infineon IR38064 + * + * Copyright (c) 2017 Google Inc + * + * VOUT_MODE is not supported by the device. The driver fakes VOUT linear16 + * mode with exponent value -8 as direct mode with m=256/b=0/R=0. + * + * The device supports VOUT_PEAK, IOUT_PEAK, and TEMPERATURE_PEAK, however + * this driver does not currently support them. + */ + +#include +#include +#include +#include +#include +#include "pmbus.h" + +static struct pmbus_driver_info ir38064_info = { + .pages = 1, + .format[PSC_VOLTAGE_IN] = linear, + .format[PSC_VOLTAGE_OUT] = direct, + .format[PSC_CURRENT_OUT] = linear, + .format[PSC_POWER] = linear, + .format[PSC_TEMPERATURE] = linear, + .m[PSC_VOLTAGE_OUT] = 256, + .b[PSC_VOLTAGE_OUT] = 0, + .R[PSC_VOLTAGE_OUT] = 0, + .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT + | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP + | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT + | PMBUS_HAVE_POUT, +}; + +static int ir38064_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + return pmbus_do_probe(client, id, &ir38064_info); +} + +static const struct i2c_device_id ir38064_id[] = { + {"ir38064", 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, ir38064_id); + +/* This is the driver that will be inserted */ +static struct i2c_driver ir38064_driver = { + .driver = { + .name = "ir38064", + }, + .probe = ir38064_probe, + .remove = pmbus_do_remove, + .id_table = ir38064_id, +}; + +module_i2c_driver(ir38064_driver); + +MODULE_AUTHOR("Maxim Sloyko "); +MODULE_DESCRIPTION("PMBus driver for Infineon IR38064"); +MODULE_LICENSE("GPL"); From 3cf10282821a3832eca6c78887e3e69a61c5feda Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Fri, 5 Apr 2019 12:39:26 -0700 Subject: [PATCH 084/125] hwmon: (pmbus_core) Replace S_ with octal values Replace S_ with octal values. The conversion was done automatically with coccinelle. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches/. This patch does not introduce functional changes. It was verified by compiling the old and new files and comparing text and data sizes. Signed-off-by: Guenter Roeck --- drivers/hwmon/pmbus/pmbus_core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c index 2e2b5851139c..e2366428a9a9 100644 --- a/drivers/hwmon/pmbus/pmbus_core.c +++ b/drivers/hwmon/pmbus/pmbus_core.c @@ -1073,7 +1073,7 @@ static int pmbus_add_boolean(struct pmbus_data *data, name, seq, type); boolean->s1 = s1; boolean->s2 = s2; - pmbus_attr_init(a, boolean->name, S_IRUGO, pmbus_show_boolean, NULL, + pmbus_attr_init(a, boolean->name, 0444, pmbus_show_boolean, NULL, (reg << 16) | mask); return pmbus_add_attribute(data, &a->dev_attr.attr); @@ -1107,7 +1107,7 @@ static struct pmbus_sensor *pmbus_add_sensor(struct pmbus_data *data, sensor->update = update; sensor->convert = convert; pmbus_dev_attr_init(a, sensor->name, - readonly ? S_IRUGO : S_IRUGO | S_IWUSR, + readonly ? 0444 : 0644, pmbus_show_sensor, pmbus_set_sensor); if (pmbus_add_attribute(data, &a->attr)) @@ -1139,7 +1139,7 @@ static int pmbus_add_label(struct pmbus_data *data, snprintf(label->label, sizeof(label->label), "%s%d", lstring, index); - pmbus_dev_attr_init(a, label->name, S_IRUGO, pmbus_show_label, NULL); + pmbus_dev_attr_init(a, label->name, 0444, pmbus_show_label, NULL); return pmbus_add_attribute(data, &a->attr); } From 8e742fc2e25ae6c2d2734a4656107ae745263794 Mon Sep 17 00:00:00 2001 From: Patrick Venture Date: Mon, 15 Apr 2019 07:17:28 -0700 Subject: [PATCH 085/125] hwmon: (ir38064) delete incorrect line Delete line indicating the datasheet was not publicly available. This line was originally present as a default during the write-up and was subsequently not removed once the datasheet was located. Signed-off-by: Patrick Venture Signed-off-by: Guenter Roeck --- Documentation/hwmon/ir38064 | 3 --- 1 file changed, 3 deletions(-) diff --git a/Documentation/hwmon/ir38064 b/Documentation/hwmon/ir38064 index c3697d7aaaa4..9f218c39bfe6 100644 --- a/Documentation/hwmon/ir38064 +++ b/Documentation/hwmon/ir38064 @@ -8,9 +8,6 @@ Supported chips: Datasheet: Publicly available at the Infineon webiste https://www.infineon.com/dgdl/Infineon-IR38064MTRPBF-DS-v03_07-EN.pdf?fileId=5546d462584d1d4a0158db0d9efb67ca -Datasheet is not publicly available. - - Authors: Maxim Sloyko Patrick Venture From 49c4455dccf241f537758a057861243f81e3ca5d Mon Sep 17 00:00:00 2001 From: "Adamski, Krzysztof (Nokia - PL/Wroclaw)" Date: Sun, 14 Apr 2019 21:58:18 +0000 Subject: [PATCH 086/125] hwmon: (pmbus) Introduce PMBUS_VIRT_*_SAMPLES registers Those virtual registers can be used to export manufacturer specific functionality for controlling the number of samples for average values reported by the device. Signed-off-by: Krzysztof Adamski Signed-off-by: Guenter Roeck --- drivers/hwmon/pmbus/pmbus.h | 15 +++++ drivers/hwmon/pmbus/pmbus_core.c | 110 +++++++++++++++++++++++++++++++ 2 files changed, 125 insertions(+) diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h index 1d24397d36ec..e73289cc867d 100644 --- a/drivers/hwmon/pmbus/pmbus.h +++ b/drivers/hwmon/pmbus/pmbus.h @@ -217,6 +217,20 @@ enum pmbus_regs { PMBUS_VIRT_PWM_ENABLE_2, PMBUS_VIRT_PWM_ENABLE_3, PMBUS_VIRT_PWM_ENABLE_4, + + /* Samples for average + * + * Drivers wanting to expose functionality for changing the number of + * samples used for average values should implement support in + * {read,write}_word_data callback for either PMBUS_VIRT_SAMPLES if it + * applies to all types of measurements, or any number of specific + * PMBUS_VIRT_*_SAMPLES registers to allow for individual control. + */ + PMBUS_VIRT_SAMPLES, + PMBUS_VIRT_IN_SAMPLES, + PMBUS_VIRT_CURR_SAMPLES, + PMBUS_VIRT_POWER_SAMPLES, + PMBUS_VIRT_TEMP_SAMPLES, }; /* @@ -371,6 +385,7 @@ enum pmbus_sensor_classes { #define PMBUS_HAVE_STATUS_VMON BIT(19) #define PMBUS_HAVE_PWM12 BIT(20) #define PMBUS_HAVE_PWM34 BIT(21) +#define PMBUS_HAVE_SAMPLES BIT(22) #define PMBUS_PAGE_VIRTUAL BIT(31) diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c index e2366428a9a9..b5d661235ae6 100644 --- a/drivers/hwmon/pmbus/pmbus_core.c +++ b/drivers/hwmon/pmbus/pmbus_core.c @@ -1901,6 +1901,112 @@ static int pmbus_add_fan_attributes(struct i2c_client *client, return 0; } +struct pmbus_samples_attr { + int reg; + char *name; +}; + +struct pmbus_samples_reg { + int page; + struct pmbus_samples_attr *attr; + struct device_attribute dev_attr; +}; + +static struct pmbus_samples_attr pmbus_samples_registers[] = { + { + .reg = PMBUS_VIRT_SAMPLES, + .name = "samples", + }, { + .reg = PMBUS_VIRT_IN_SAMPLES, + .name = "in_samples", + }, { + .reg = PMBUS_VIRT_CURR_SAMPLES, + .name = "curr_samples", + }, { + .reg = PMBUS_VIRT_POWER_SAMPLES, + .name = "power_samples", + }, { + .reg = PMBUS_VIRT_TEMP_SAMPLES, + .name = "temp_samples", + } +}; + +#define to_samples_reg(x) container_of(x, struct pmbus_samples_reg, dev_attr) + +static ssize_t pmbus_show_samples(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int val; + struct i2c_client *client = to_i2c_client(dev->parent); + struct pmbus_samples_reg *reg = to_samples_reg(devattr); + + val = _pmbus_read_word_data(client, reg->page, reg->attr->reg); + if (val < 0) + return val; + + return snprintf(buf, PAGE_SIZE, "%d\n", val); +} + +static ssize_t pmbus_set_samples(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + int ret; + long val; + struct i2c_client *client = to_i2c_client(dev->parent); + struct pmbus_samples_reg *reg = to_samples_reg(devattr); + + if (kstrtol(buf, 0, &val) < 0) + return -EINVAL; + + ret = _pmbus_write_word_data(client, reg->page, reg->attr->reg, val); + + return ret ? : count; +} + +static int pmbus_add_samples_attr(struct pmbus_data *data, int page, + struct pmbus_samples_attr *attr) +{ + struct pmbus_samples_reg *reg; + + reg = devm_kzalloc(data->dev, sizeof(*reg), GFP_KERNEL); + if (!reg) + return -ENOMEM; + + reg->attr = attr; + reg->page = page; + + pmbus_dev_attr_init(®->dev_attr, attr->name, 0644, + pmbus_show_samples, pmbus_set_samples); + + return pmbus_add_attribute(data, ®->dev_attr.attr); +} + +static int pmbus_add_samples_attributes(struct i2c_client *client, + struct pmbus_data *data) +{ + const struct pmbus_driver_info *info = data->info; + int s; + + if (!(info->func[0] & PMBUS_HAVE_SAMPLES)) + return 0; + + for (s = 0; s < ARRAY_SIZE(pmbus_samples_registers); s++) { + struct pmbus_samples_attr *attr; + int ret; + + attr = &pmbus_samples_registers[s]; + if (!pmbus_check_word_register(client, 0, attr->reg)) + continue; + + ret = pmbus_add_samples_attr(data, 0, attr); + if (ret) + return ret; + } + + return 0; +} + static int pmbus_find_attributes(struct i2c_client *client, struct pmbus_data *data) { @@ -1932,6 +2038,10 @@ static int pmbus_find_attributes(struct i2c_client *client, /* Fans */ ret = pmbus_add_fan_attributes(client, data); + if (ret) + return ret; + + ret = pmbus_add_samples_attributes(client, data); return ret; } From bfe033a048f7ce486e01f3ef5a7a24618088af44 Mon Sep 17 00:00:00 2001 From: "Adamski, Krzysztof (Nokia - PL/Wroclaw)" Date: Sun, 14 Apr 2019 21:58:40 +0000 Subject: [PATCH 087/125] hwmon: Document the samples attributes Document new ABI attributes: {in,power,curr,temp}_samples and samples. Signed-off-by: Krzysztof Adamski Signed-off-by: Guenter Roeck --- Documentation/hwmon/sysfs-interface | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface index 2b9e1005d88b..7b91706d01c8 100644 --- a/Documentation/hwmon/sysfs-interface +++ b/Documentation/hwmon/sysfs-interface @@ -756,6 +756,24 @@ intrusion[0-*]_beep 1: enable RW +******************************** +* Average sample configuration * +******************************** + +Devices allowing for reading {in,power,curr,temp}_average values may export +attributes for controlling number of samples used to compute average. + +samples Sets number of average samples for all types of measurements. + RW + +in_samples +power_samples +curr_samples +temp_samples Sets number of average samples for specific type of measurements. + Note that on some devices it won't be possible to set all of them + to different values so changing one might also change some others. + RW + sysfs attribute writes interpretation ------------------------------------- From 5d9e8b3f809f1c12e32fea7061ad2319d2848600 Mon Sep 17 00:00:00 2001 From: "Adamski, Krzysztof (Nokia - PL/Wroclaw)" Date: Sun, 14 Apr 2019 21:59:19 +0000 Subject: [PATCH 088/125] hwmon: (lm25066) Support SAMPLES_FOR_AVG register Manufacturer specific SAMPLES_FOR_AVG register allows setting the number of samples used in computing the average values (PMBUS_VIRT_READ_*_AVG). The number we write is an exponent of base 2 of the number of samples so for example writing 3 will result in 8 samples average. Signed-off-by: Krzysztof Adamski Signed-off-by: Guenter Roeck --- drivers/hwmon/pmbus/lm25066.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/drivers/hwmon/pmbus/lm25066.c b/drivers/hwmon/pmbus/lm25066.c index 53db78753a0d..715d4ab57516 100644 --- a/drivers/hwmon/pmbus/lm25066.c +++ b/drivers/hwmon/pmbus/lm25066.c @@ -26,6 +26,7 @@ #include #include #include +#include #include "pmbus.h" enum chips { lm25056, lm25066, lm5064, lm5066, lm5066i }; @@ -39,12 +40,15 @@ enum chips { lm25056, lm25066, lm5064, lm5066, lm5066i }; #define LM25066_CLEAR_PIN_PEAK 0xd6 #define LM25066_DEVICE_SETUP 0xd9 #define LM25066_READ_AVG_VIN 0xdc +#define LM25066_SAMPLES_FOR_AVG 0xdb #define LM25066_READ_AVG_VOUT 0xdd #define LM25066_READ_AVG_IIN 0xde #define LM25066_READ_AVG_PIN 0xdf #define LM25066_DEV_SETUP_CL BIT(4) /* Current limit */ +#define LM25066_SAMPLES_FOR_AVG_MAX 4096 + /* LM25056 only */ #define LM25056_VAUX_OV_WARN_LIMIT 0xe3 @@ -284,6 +288,12 @@ static int lm25066_read_word_data(struct i2c_client *client, int page, int reg) case PMBUS_VIRT_RESET_PIN_HISTORY: ret = 0; break; + case PMBUS_VIRT_SAMPLES: + ret = pmbus_read_byte_data(client, 0, LM25066_SAMPLES_FOR_AVG); + if (ret < 0) + break; + ret = 1 << ret; + break; default: ret = -ENODATA; break; @@ -398,6 +408,11 @@ static int lm25066_write_word_data(struct i2c_client *client, int page, int reg, case PMBUS_VIRT_RESET_PIN_HISTORY: ret = pmbus_write_byte(client, 0, LM25066_CLEAR_PIN_PEAK); break; + case PMBUS_VIRT_SAMPLES: + word = clamp_val(word, 1, LM25066_SAMPLES_FOR_AVG_MAX); + ret = pmbus_write_byte_data(client, 0, LM25066_SAMPLES_FOR_AVG, + ilog2(word)); + break; default: ret = -ENODATA; break; @@ -438,7 +453,7 @@ static int lm25066_probe(struct i2c_client *client, info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VMON | PMBUS_HAVE_PIN | PMBUS_HAVE_IIN | PMBUS_HAVE_STATUS_INPUT - | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP; + | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_SAMPLES; if (data->id == lm25056) { info->func[0] |= PMBUS_HAVE_STATUS_VMON; From 9f00995e4eb293679597d76462fec2ce152e3500 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 15 Apr 2019 13:23:48 -0700 Subject: [PATCH 089/125] hwmon: Add support for samples attributes Add support for the new samples attributes to the hwmon core. Cc: Krzysztof Adamski Cc: Nicolin Chen Acked-by: Nicolin Chen Signed-off-by: Guenter Roeck --- drivers/hwmon/hwmon.c | 5 +++++ include/linux/hwmon.h | 10 ++++++++++ 2 files changed, 15 insertions(+) diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c index c22dc1e07911..cd91510a5387 100644 --- a/drivers/hwmon/hwmon.c +++ b/drivers/hwmon/hwmon.c @@ -324,6 +324,11 @@ static const char * const hwmon_chip_attrs[] = { [hwmon_chip_power_reset_history] = "power_reset_history", [hwmon_chip_update_interval] = "update_interval", [hwmon_chip_alarms] = "alarms", + [hwmon_chip_samples] = "samples", + [hwmon_chip_curr_samples] = "curr_samples", + [hwmon_chip_in_samples] = "in_samples", + [hwmon_chip_power_samples] = "power_samples", + [hwmon_chip_temp_samples] = "temp_samples", }; static const char * const hwmon_temp_attr_templates[] = { diff --git a/include/linux/hwmon.h b/include/linux/hwmon.h index 7a8cc06a0d61..2b949fa501e1 100644 --- a/include/linux/hwmon.h +++ b/include/linux/hwmon.h @@ -40,6 +40,11 @@ enum hwmon_chip_attributes { hwmon_chip_register_tz, hwmon_chip_update_interval, hwmon_chip_alarms, + hwmon_chip_samples, + hwmon_chip_curr_samples, + hwmon_chip_in_samples, + hwmon_chip_power_samples, + hwmon_chip_temp_samples, }; #define HWMON_C_TEMP_RESET_HISTORY BIT(hwmon_chip_temp_reset_history) @@ -49,6 +54,11 @@ enum hwmon_chip_attributes { #define HWMON_C_REGISTER_TZ BIT(hwmon_chip_register_tz) #define HWMON_C_UPDATE_INTERVAL BIT(hwmon_chip_update_interval) #define HWMON_C_ALARMS BIT(hwmon_chip_alarms) +#define HWMON_C_SAMPLES BIT(hwmon_chip_samples) +#define HWMON_C_CURR_SAMPLES BIT(hwmon_chip_curr_samples) +#define HWMON_C_IN_SAMPLES BIT(hwmon_chip_in_samples) +#define HWMON_C_POWER_SAMPLES BIT(hwmon_chip_power_samples) +#define HWMON_C_TEMP_SAMPLES BIT(hwmon_chip_temp_samples) enum hwmon_temp_attributes { hwmon_temp_input = 0, From 991d679951f0df27db170036080746b84115e1e7 Mon Sep 17 00:00:00 2001 From: "krzysztof.adamski@nokia.com" Date: Mon, 15 Apr 2019 14:44:05 -0700 Subject: [PATCH 090/125] pmbus: support for custom sysfs attributes This patch makes it possible to pass custom struct attribute_group array via the pmbus_driver_info struct so that those can be added to the attribute groups passed to hwmon_device_register_with_groups(). This makes it possible to register custom sysfs attributes by PMBUS drivers similar to how you can do this with most other busses/classes. Signed-off-by: Krzysztof Adamski Signed-off-by: Guenter Roeck --- drivers/hwmon/pmbus/pmbus.h | 3 +++ drivers/hwmon/pmbus/pmbus_core.c | 13 ++++++++++++- 2 files changed, 15 insertions(+), 1 deletion(-) diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h index e73289cc867d..59f85658313c 100644 --- a/drivers/hwmon/pmbus/pmbus.h +++ b/drivers/hwmon/pmbus/pmbus.h @@ -432,6 +432,9 @@ struct pmbus_driver_info { /* Regulator functionality, if supported by this chip driver. */ int num_regulators; const struct regulator_desc *reg_desc; + + /* custom attributes */ + const struct attribute_group **groups; }; /* Regulator ops */ diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c index b5d661235ae6..32a74b8be6bd 100644 --- a/drivers/hwmon/pmbus/pmbus_core.c +++ b/drivers/hwmon/pmbus/pmbus_core.c @@ -103,7 +103,7 @@ struct pmbus_data { int max_attributes; int num_attributes; struct attribute_group group; - const struct attribute_group *groups[2]; + const struct attribute_group **groups; struct dentry *debugfs; /* debugfs device directory */ struct pmbus_sensor *sensors; @@ -2415,6 +2415,7 @@ int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id, struct device *dev = &client->dev; const struct pmbus_platform_data *pdata = dev_get_platdata(dev); struct pmbus_data *data; + size_t groups_num = 0; int ret; if (!info) @@ -2429,6 +2430,15 @@ int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id, if (!data) return -ENOMEM; + if (info->groups) + while (info->groups[groups_num]) + groups_num++; + + data->groups = devm_kcalloc(dev, groups_num + 2, sizeof(void *), + GFP_KERNEL); + if (!data->groups) + return -ENOMEM; + i2c_set_clientdata(client, data); mutex_init(&data->update_lock); data->dev = dev; @@ -2456,6 +2466,7 @@ int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id, } data->groups[0] = &data->group; + memcpy(data->groups + 1, info->groups, sizeof(void *) * groups_num); data->hwmon_dev = hwmon_device_register_with_groups(dev, client->name, data, data->groups); if (IS_ERR(data->hwmon_dev)) { From 038a9c3d1e42420943c60f879fdb00b62f207f9c Mon Sep 17 00:00:00 2001 From: Maxim Sloyko Date: Mon, 15 Apr 2019 15:28:07 -0700 Subject: [PATCH 091/125] hwmon: (pmbus/isl68137) Add driver for Intersil ISL68137 PWM Controller Intersil ISL68137 is a digital output 7-phase configurable PWM controller with an AVSBus interface. Signed-off-by: Maxim Sloyko Signed-off-by: Robert Lippert Signed-off-by: Patrick Venture Signed-off-by: Guenter Roeck --- Documentation/hwmon/isl68137 | 72 ++++++++++++++ drivers/hwmon/pmbus/Kconfig | 9 ++ drivers/hwmon/pmbus/Makefile | 1 + drivers/hwmon/pmbus/isl68137.c | 169 +++++++++++++++++++++++++++++++++ 4 files changed, 251 insertions(+) create mode 100644 Documentation/hwmon/isl68137 create mode 100644 drivers/hwmon/pmbus/isl68137.c diff --git a/Documentation/hwmon/isl68137 b/Documentation/hwmon/isl68137 new file mode 100644 index 000000000000..92e5c5fc5b77 --- /dev/null +++ b/Documentation/hwmon/isl68137 @@ -0,0 +1,72 @@ +Kernel driver isl68137 +====================== + +Supported chips: + * Intersil ISL68137 + Prefix: 'isl68137' + Addresses scanned: - + Datasheet: Publicly available at the Intersil website + https://www.intersil.com/content/dam/Intersil/documents/isl6/isl68137.pdf + +Authors: + Maxim Sloyko + Robert Lippert + Patrick Venture + +Description +----------- + +Intersil ISL68137 is a digital output 7-phase configurable PWM +controller with an AVSBus interface. + +Usage Notes +----------- + +This driver does not probe for PMBus devices. You will have to instantiate +devices explicitly. + +The ISL68137 AVS operation mode must be enabled/disabled at runtime. + +Beyond the normal sysfs pmbus attributes, the driver exposes a control attribute. + +Additional Sysfs attributes +--------------------------- + +avs(0|1)_enable Controls the AVS state of each rail. + +curr1_label "iin" +curr1_input Measured input current +curr1_crit Critical maximum current +curr1_crit_alarm Current critical high alarm + +curr[2-3]_label "iout[1-2]" +curr[2-3]_input Measured output current +curr[2-3]_crit Critical maximum current +curr[2-3]_crit_alarm Current critical high alarm + +in1_label "vin" +in1_input Measured input voltage +in1_lcrit Critical minimum input voltage +in1_lcrit_alarm Input voltage critical low alarm +in1_crit Critical maximum input voltage +in1_crit_alarm Input voltage critical high alarm + +in[2-3]_label "vout[1-2]" +in[2-3]_input Measured output voltage +in[2-3]_lcrit Critical minimum output voltage +in[2-3]_lcrit_alarm Output voltage critical low alarm +in[2-3]_crit Critical maximum output voltage +in[2-3]_crit_alarm Output voltage critical high alarm + +power1_label "pin" +power1_input Measured input power +power1_alarm Input power high alarm + +power[2-3]_label "pout[1-2]" +power[2-3]_input Measured output power + +temp[1-3]_input Measured temperature +temp[1-3]_crit Critical high temperature +temp[1-3]_crit_alarm Chip temperature critical high alarm +temp[1-3]_max Maximum temperature +temp[1-3]_max_alarm Chip temperature high alarm diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index de87abab990e..7edab7e30eaf 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -63,6 +63,15 @@ config SENSORS_IR38064 This driver can also be built as a module. If so, the module will be called ir38064. +config SENSORS_ISL68137 + tristate "Intersil ISL68137" + help + If you say yes here you get hardware monitoring support for Intersil + ISL68137. + + This driver can also be built as a module. If so, the module will + be called isl68137. + config SENSORS_LM25066 tristate "National Semiconductor LM25066 and compatibles" help diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile index 7d1fa6b3c8c9..2219b9300316 100644 --- a/drivers/hwmon/pmbus/Makefile +++ b/drivers/hwmon/pmbus/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o obj-$(CONFIG_SENSORS_IBM_CFFPS) += ibm-cffps.o obj-$(CONFIG_SENSORS_IR35221) += ir35221.o obj-$(CONFIG_SENSORS_IR38064) += ir38064.o +obj-$(CONFIG_SENSORS_ISL68137) += isl68137.o obj-$(CONFIG_SENSORS_LM25066) += lm25066.o obj-$(CONFIG_SENSORS_LTC2978) += ltc2978.o obj-$(CONFIG_SENSORS_LTC3815) += ltc3815.o diff --git a/drivers/hwmon/pmbus/isl68137.c b/drivers/hwmon/pmbus/isl68137.c new file mode 100644 index 000000000000..515596c92fe1 --- /dev/null +++ b/drivers/hwmon/pmbus/isl68137.c @@ -0,0 +1,169 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Hardware monitoring driver for Intersil ISL68137 + * + * Copyright (c) 2017 Google Inc + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "pmbus.h" + +#define ISL68137_VOUT_AVS 0x30 + +static ssize_t isl68137_avs_enable_show_page(struct i2c_client *client, + int page, + char *buf) +{ + int val = pmbus_read_byte_data(client, page, PMBUS_OPERATION); + + return sprintf(buf, "%d\n", + (val & ISL68137_VOUT_AVS) == ISL68137_VOUT_AVS ? 1 : 0); +} + +static ssize_t isl68137_avs_enable_store_page(struct i2c_client *client, + int page, + const char *buf, size_t count) +{ + int rc, op_val; + bool result; + + rc = kstrtobool(buf, &result); + if (rc) + return rc; + + op_val = result ? ISL68137_VOUT_AVS : 0; + + /* + * Writes to VOUT setpoint over AVSBus will persist after the VRM is + * switched to PMBus control. Switching back to AVSBus control + * restores this persisted setpoint rather than re-initializing to + * PMBus VOUT_COMMAND. Writing VOUT_COMMAND first over PMBus before + * enabling AVS control is the workaround. + */ + if (op_val == ISL68137_VOUT_AVS) { + rc = pmbus_read_word_data(client, page, PMBUS_VOUT_COMMAND); + if (rc < 0) + return rc; + + rc = pmbus_write_word_data(client, page, PMBUS_VOUT_COMMAND, + rc); + if (rc < 0) + return rc; + } + + rc = pmbus_update_byte_data(client, page, PMBUS_OPERATION, + ISL68137_VOUT_AVS, op_val); + + return (rc < 0) ? rc : count; +} + +static ssize_t isl68137_avs_enable_show(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev->parent); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + + return isl68137_avs_enable_show_page(client, attr->index, buf); +} + +static ssize_t isl68137_avs_enable_store(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev->parent); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + + return isl68137_avs_enable_store_page(client, attr->index, buf, count); +} + +static SENSOR_DEVICE_ATTR_RW(avs0_enable, isl68137_avs_enable, 0); +static SENSOR_DEVICE_ATTR_RW(avs1_enable, isl68137_avs_enable, 1); + +static struct attribute *enable_attrs[] = { + &sensor_dev_attr_avs0_enable.dev_attr.attr, + &sensor_dev_attr_avs1_enable.dev_attr.attr, + NULL, +}; + +static const struct attribute_group enable_group = { + .attrs = enable_attrs, +}; + +static const struct attribute_group *attribute_groups[] = { + &enable_group, + NULL, +}; + +static struct pmbus_driver_info isl68137_info = { + .pages = 2, + .format[PSC_VOLTAGE_IN] = direct, + .format[PSC_VOLTAGE_OUT] = direct, + .format[PSC_CURRENT_IN] = direct, + .format[PSC_CURRENT_OUT] = direct, + .format[PSC_POWER] = direct, + .format[PSC_TEMPERATURE] = direct, + .m[PSC_VOLTAGE_IN] = 1, + .b[PSC_VOLTAGE_IN] = 0, + .R[PSC_VOLTAGE_IN] = 3, + .m[PSC_VOLTAGE_OUT] = 1, + .b[PSC_VOLTAGE_OUT] = 0, + .R[PSC_VOLTAGE_OUT] = 3, + .m[PSC_CURRENT_IN] = 1, + .b[PSC_CURRENT_IN] = 0, + .R[PSC_CURRENT_IN] = 2, + .m[PSC_CURRENT_OUT] = 1, + .b[PSC_CURRENT_OUT] = 0, + .R[PSC_CURRENT_OUT] = 1, + .m[PSC_POWER] = 1, + .b[PSC_POWER] = 0, + .R[PSC_POWER] = 0, + .m[PSC_TEMPERATURE] = 1, + .b[PSC_TEMPERATURE] = 0, + .R[PSC_TEMPERATURE] = 0, + .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_PIN + | PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 + | PMBUS_HAVE_TEMP3 | PMBUS_HAVE_STATUS_TEMP + | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_POUT, + .func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_POUT, + .groups = attribute_groups, +}; + +static int isl68137_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + return pmbus_do_probe(client, id, &isl68137_info); +} + +static const struct i2c_device_id isl68137_id[] = { + {"isl68137", 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, isl68137_id); + +/* This is the driver that will be inserted */ +static struct i2c_driver isl68137_driver = { + .driver = { + .name = "isl68137", + }, + .probe = isl68137_probe, + .remove = pmbus_do_remove, + .id_table = isl68137_id, +}; + +module_i2c_driver(isl68137_driver); + +MODULE_AUTHOR("Maxim Sloyko "); +MODULE_DESCRIPTION("PMBus driver for Intersil ISL68137"); +MODULE_LICENSE("GPL"); From 5c090abf945bf5fd496c861f371410888be8f4de Mon Sep 17 00:00:00 2001 From: Nicolin Chen Date: Tue, 16 Apr 2019 12:41:31 -0700 Subject: [PATCH 092/125] hwmon: (ina3221) Add averaging mode support The CONFIG register has a 3-bit averaging mode field for users to setup the number of samples that are collected and averaged together. This is very useful to filter noise from sensor data. This patch adds a 'samples' sysfs node using hwmon_chip_samples of hwmon core, and updates wait time calculation by taking this samples value into account. Signed-off-by: Nicolin Chen Signed-off-by: Guenter Roeck --- Documentation/hwmon/ina3221 | 3 ++ drivers/hwmon/ina3221.c | 67 ++++++++++++++++++++++++++++++++++++- 2 files changed, 69 insertions(+), 1 deletion(-) diff --git a/Documentation/hwmon/ina3221 b/Documentation/hwmon/ina3221 index 4b82cbfb551c..ed3f22769d4b 100644 --- a/Documentation/hwmon/ina3221 +++ b/Documentation/hwmon/ina3221 @@ -35,3 +35,6 @@ curr[123]_max Warning alert current(mA) setting, activates the average is above this value. curr[123]_max_alarm Warning alert current limit exceeded in[456]_input Shunt voltage(uV) for channels 1, 2, and 3 respectively +samples Number of samples using in the averaging mode. + Supports the list of number of samples: + 1, 4, 16, 64, 128, 256, 512, 1024 diff --git a/drivers/hwmon/ina3221.c b/drivers/hwmon/ina3221.c index e6f43df0435c..74d39d212931 100644 --- a/drivers/hwmon/ina3221.c +++ b/drivers/hwmon/ina3221.c @@ -22,6 +22,7 @@ #include #include #include +#include #define INA3221_DRIVER_NAME "ina3221" @@ -51,6 +52,9 @@ #define INA3221_CONFIG_VBUS_CT_SHIFT 6 #define INA3221_CONFIG_VBUS_CT_MASK GENMASK(8, 6) #define INA3221_CONFIG_VBUS_CT(x) (((x) & GENMASK(8, 6)) >> 6) +#define INA3221_CONFIG_AVG_SHIFT 9 +#define INA3221_CONFIG_AVG_MASK GENMASK(11, 9) +#define INA3221_CONFIG_AVG(x) (((x) & GENMASK(11, 9)) >> 9) #define INA3221_CONFIG_CHs_EN_MASK GENMASK(14, 12) #define INA3221_CONFIG_CHx_EN(x) BIT(14 - (x)) @@ -135,17 +139,24 @@ static const u16 ina3221_conv_time[] = { 140, 204, 332, 588, 1100, 2116, 4156, 8244, }; +/* Lookup table for number of samples using in averaging mode */ +static const int ina3221_avg_samples[] = { + 1, 4, 16, 64, 128, 256, 512, 1024, +}; + static inline int ina3221_wait_for_data(struct ina3221_data *ina) { u32 channels = hweight16(ina->reg_config & INA3221_CONFIG_CHs_EN_MASK); u32 vbus_ct_idx = INA3221_CONFIG_VBUS_CT(ina->reg_config); u32 vsh_ct_idx = INA3221_CONFIG_VSH_CT(ina->reg_config); + u32 samples_idx = INA3221_CONFIG_AVG(ina->reg_config); + u32 samples = ina3221_avg_samples[samples_idx]; u32 vbus_ct = ina3221_conv_time[vbus_ct_idx]; u32 vsh_ct = ina3221_conv_time[vsh_ct_idx]; u32 wait, cvrf; /* Calculate total conversion time */ - wait = channels * (vbus_ct + vsh_ct); + wait = channels * (vbus_ct + vsh_ct) * samples; /* Polling the CVRF bit to make sure read data is ready */ return regmap_field_read_poll_timeout(ina->fields[F_CVRF], @@ -176,6 +187,21 @@ static const u8 ina3221_in_reg[] = { INA3221_SHUNT3, }; +static int ina3221_read_chip(struct device *dev, u32 attr, long *val) +{ + struct ina3221_data *ina = dev_get_drvdata(dev); + int regval; + + switch (attr) { + case hwmon_chip_samples: + regval = INA3221_CONFIG_AVG(ina->reg_config); + *val = ina3221_avg_samples[regval]; + return 0; + default: + return -EOPNOTSUPP; + } +} + static int ina3221_read_in(struct device *dev, u32 attr, int channel, long *val) { const bool is_shunt = channel > INA3221_CHANNEL3; @@ -279,6 +305,30 @@ static int ina3221_read_curr(struct device *dev, u32 attr, } } +static int ina3221_write_chip(struct device *dev, u32 attr, long val) +{ + struct ina3221_data *ina = dev_get_drvdata(dev); + int ret, idx; + + switch (attr) { + case hwmon_chip_samples: + idx = find_closest(val, ina3221_avg_samples, + ARRAY_SIZE(ina3221_avg_samples)); + + ret = regmap_update_bits(ina->regmap, INA3221_CONFIG, + INA3221_CONFIG_AVG_MASK, + idx << INA3221_CONFIG_AVG_SHIFT); + if (ret) + return ret; + + /* Update reg_config accordingly */ + return regmap_read(ina->regmap, INA3221_CONFIG, + &ina->reg_config); + default: + return -EOPNOTSUPP; + } +} + static int ina3221_write_curr(struct device *dev, u32 attr, int channel, long val) { @@ -361,6 +411,9 @@ static int ina3221_read(struct device *dev, enum hwmon_sensor_types type, mutex_lock(&ina->lock); switch (type) { + case hwmon_chip: + ret = ina3221_read_chip(dev, attr, val); + break; case hwmon_in: /* 0-align channel ID */ ret = ina3221_read_in(dev, attr, channel - 1, val); @@ -387,6 +440,9 @@ static int ina3221_write(struct device *dev, enum hwmon_sensor_types type, mutex_lock(&ina->lock); switch (type) { + case hwmon_chip: + ret = ina3221_write_chip(dev, attr, val); + break; case hwmon_in: /* 0-align channel ID */ ret = ina3221_write_enable(dev, channel - 1, val); @@ -423,6 +479,13 @@ static umode_t ina3221_is_visible(const void *drvdata, const struct ina3221_input *input = NULL; switch (type) { + case hwmon_chip: + switch (attr) { + case hwmon_chip_samples: + return 0644; + default: + return 0; + } case hwmon_in: /* Ignore in0_ */ if (channel == 0) @@ -463,6 +526,8 @@ static umode_t ina3221_is_visible(const void *drvdata, HWMON_C_MAX | HWMON_C_MAX_ALARM) static const struct hwmon_channel_info *ina3221_info[] = { + HWMON_CHANNEL_INFO(chip, + HWMON_C_SAMPLES), HWMON_CHANNEL_INFO(in, /* 0: dummy, skipped in is_visible */ HWMON_I_INPUT, From b5c46a53ee6b1f97104883d93847b2b2fdddc289 Mon Sep 17 00:00:00 2001 From: Eddie James Date: Tue, 16 Apr 2019 15:43:48 +0000 Subject: [PATCH 093/125] hwmon: (occ) Store error condition for rate-limited polls The OCC driver limits the rate of sending poll commands to the OCC. If a user reads a hwmon entry after a poll response resulted in an error and is rate-limited, the error is invisible to the user. Fix this by storing the last error and returning that in the rate-limited case. Signed-off-by: Eddie James Signed-off-by: Guenter Roeck --- drivers/hwmon/occ/common.c | 4 ++++ drivers/hwmon/occ/common.h | 3 ++- 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/hwmon/occ/common.c b/drivers/hwmon/occ/common.c index 9d197e9d47c0..13a6290c8d25 100644 --- a/drivers/hwmon/occ/common.c +++ b/drivers/hwmon/occ/common.c @@ -141,6 +141,7 @@ static int occ_poll(struct occ *occ) /* mutex should already be locked if necessary */ rc = occ->send_cmd(occ, cmd); if (rc) { + occ->last_error = rc; if (occ->error_count++ > OCC_ERROR_COUNT_THRESHOLD) occ->error = rc; @@ -149,6 +150,7 @@ static int occ_poll(struct occ *occ) /* clear error since communication was successful */ occ->error_count = 0; + occ->last_error = 0; occ->error = 0; /* check for safe state */ @@ -210,6 +212,8 @@ int occ_update_response(struct occ *occ) if (time_after(jiffies, occ->last_update + OCC_UPDATE_FREQUENCY)) { rc = occ_poll(occ); occ->last_update = jiffies; + } else { + rc = occ->last_error; } mutex_unlock(&occ->lock); diff --git a/drivers/hwmon/occ/common.h b/drivers/hwmon/occ/common.h index ed2cf4245295..fc13f3c73c47 100644 --- a/drivers/hwmon/occ/common.h +++ b/drivers/hwmon/occ/common.h @@ -106,7 +106,8 @@ struct occ { struct attribute_group group; const struct attribute_group *groups[2]; - int error; /* latest transfer error */ + int error; /* final transfer error after retry */ + int last_error; /* latest transfer error */ unsigned int error_count; /* number of xfr errors observed */ unsigned long last_safe; /* time OCC entered "safe" state */ From afe8419eb628430fe80452b9fd36cd0ebf411bd2 Mon Sep 17 00:00:00 2001 From: Eddie James Date: Tue, 16 Apr 2019 15:43:49 +0000 Subject: [PATCH 094/125] hwmon: (occ) Prevent sysfs error attribute from returning error The error sysfs attribute returns the stored error state of the OCC and doesn't depend on the OCC poll response. Therefore, split the error attribute into it's own function to avoid failing out of the function if the poll response fails. Signed-off-by: Eddie James Signed-off-by: Guenter Roeck --- drivers/hwmon/occ/sysfs.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/drivers/hwmon/occ/sysfs.c b/drivers/hwmon/occ/sysfs.c index 1cb1e65d086a..c73be0747e66 100644 --- a/drivers/hwmon/occ/sysfs.c +++ b/drivers/hwmon/occ/sysfs.c @@ -63,9 +63,6 @@ static ssize_t occ_sysfs_show(struct device *dev, else val = 1; break; - case 8: - val = occ->error; - break; default: return -EINVAL; } @@ -73,6 +70,16 @@ static ssize_t occ_sysfs_show(struct device *dev, return snprintf(buf, PAGE_SIZE - 1, "%d\n", val); } +static ssize_t occ_error_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct occ *occ = dev_get_drvdata(dev); + + occ_update_response(occ); + + return snprintf(buf, PAGE_SIZE - 1, "%d\n", occ->error); +} + static SENSOR_DEVICE_ATTR(occ_master, 0444, occ_sysfs_show, NULL, 0); static SENSOR_DEVICE_ATTR(occ_active, 0444, occ_sysfs_show, NULL, 1); static SENSOR_DEVICE_ATTR(occ_dvfs_overtemp, 0444, occ_sysfs_show, NULL, 2); @@ -81,7 +88,7 @@ static SENSOR_DEVICE_ATTR(occ_mem_throttle, 0444, occ_sysfs_show, NULL, 4); static SENSOR_DEVICE_ATTR(occ_quick_pwr_drop, 0444, occ_sysfs_show, NULL, 5); static SENSOR_DEVICE_ATTR(occ_state, 0444, occ_sysfs_show, NULL, 6); static SENSOR_DEVICE_ATTR(occs_present, 0444, occ_sysfs_show, NULL, 7); -static SENSOR_DEVICE_ATTR(occ_error, 0444, occ_sysfs_show, NULL, 8); +static DEVICE_ATTR_RO(occ_error); static struct attribute *occ_attributes[] = { &sensor_dev_attr_occ_master.dev_attr.attr, @@ -92,7 +99,7 @@ static struct attribute *occ_attributes[] = { &sensor_dev_attr_occ_quick_pwr_drop.dev_attr.attr, &sensor_dev_attr_occ_state.dev_attr.attr, &sensor_dev_attr_occs_present.dev_attr.attr, - &sensor_dev_attr_occ_error.dev_attr.attr, + &dev_attr_occ_error.attr, NULL }; @@ -156,7 +163,7 @@ void occ_sysfs_poll_done(struct occ *occ) } if (occ->error && occ->error != occ->prev_error) { - name = sensor_dev_attr_occ_error.dev_attr.attr.name; + name = dev_attr_occ_error.attr.name; sysfs_notify(&occ->bus_dev->kobj, NULL, name); } From d2a9b01ff68210cbe78c499858d51890938dee86 Mon Sep 17 00:00:00 2001 From: Eddie James Date: Tue, 16 Apr 2019 15:54:28 +0000 Subject: [PATCH 095/125] hwmon: (occ) Add more details to Kconfig help text The help text needs to spell out how the driver runs on a BMC, as it previously seemed to indicate it ran on a POWER processor. Signed-off-by: Eddie James Signed-off-by: Guenter Roeck --- drivers/hwmon/occ/Kconfig | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/hwmon/occ/Kconfig b/drivers/hwmon/occ/Kconfig index 2a3869f15026..1658634a053e 100644 --- a/drivers/hwmon/occ/Kconfig +++ b/drivers/hwmon/occ/Kconfig @@ -9,8 +9,10 @@ config SENSORS_OCC_P8_I2C select SENSORS_OCC help This option enables support for monitoring sensors provided by the - On-Chip Controller (OCC) on a POWER8 processor. Communications with - the OCC are established through I2C bus. + On-Chip Controller (OCC) on a POWER8 processor. However, this driver + can only run on a baseboard management controller (BMC) connected to + the P8, not the POWER processor itself. Communications with the OCC are + established through I2C bus. This driver can also be built as a module. If so, the module will be called occ-p8-hwmon. @@ -22,8 +24,10 @@ config SENSORS_OCC_P9_SBE select SENSORS_OCC help This option enables support for monitoring sensors provided by the - On-Chip Controller (OCC) on a POWER9 processor. Communications with - the OCC are established through SBE fifo on an FSI bus. + On-Chip Controller (OCC) on a POWER9 processor. However, this driver + can only run on a baseboard management controller (BMC) connected to + the P9, not the POWER processor itself. Communications with the OCC are + established through SBE fifo on an FSI bus. This driver can also be built as a module. If so, the module will be called occ-p9-hwmon. From f8e8cfda6569859c339ffacbb93e02d9cdb08574 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 17 Apr 2019 06:46:09 -0300 Subject: [PATCH 096/125] docs: hwmon: k10temp: convert to ReST format Convert k10temp to ReST format, in order to allow it to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Guenter Roeck --- Documentation/hwmon/k10temp | 37 ++++++++++++++++++++++++++++++++++++- 1 file changed, 36 insertions(+), 1 deletion(-) diff --git a/Documentation/hwmon/k10temp b/Documentation/hwmon/k10temp index 254d2f55345a..12a86ba17de9 100644 --- a/Documentation/hwmon/k10temp +++ b/Documentation/hwmon/k10temp @@ -2,42 +2,77 @@ Kernel driver k10temp ===================== Supported chips: + * AMD Family 10h processors: + Socket F: Quad-Core/Six-Core/Embedded Opteron (but see below) + Socket AM2+: Quad-Core Opteron, Phenom (II) X3/X4, Athlon X2 (but see below) + Socket AM3: Quad-Core Opteron, Athlon/Phenom II X2/X3/X4, Sempron II + Socket S1G3: Athlon II, Sempron, Turion II + * AMD Family 11h processors: + Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra) + * AMD Family 12h processors: "Llano" (E2/A4/A6/A8-Series) + * AMD Family 14h processors: "Brazos" (C/E/G/Z-Series) + * AMD Family 15h processors: "Bulldozer" (FX-Series), "Trinity", "Kaveri", "Carrizo" + * AMD Family 16h processors: "Kabini", "Mullins" Prefix: 'k10temp' + Addresses scanned: PCI space + Datasheets: + BIOS and Kernel Developer's Guide (BKDG) For AMD Family 10h Processors: + http://support.amd.com/us/Processor_TechDocs/31116.pdf + BIOS and Kernel Developer's Guide (BKDG) for AMD Family 11h Processors: + http://support.amd.com/us/Processor_TechDocs/41256.pdf + BIOS and Kernel Developer's Guide (BKDG) for AMD Family 12h Processors: + http://support.amd.com/us/Processor_TechDocs/41131.pdf + BIOS and Kernel Developer's Guide (BKDG) for AMD Family 14h Models 00h-0Fh Processors: + http://support.amd.com/us/Processor_TechDocs/43170.pdf + Revision Guide for AMD Family 10h Processors: + http://support.amd.com/us/Processor_TechDocs/41322.pdf + Revision Guide for AMD Family 11h Processors: + http://support.amd.com/us/Processor_TechDocs/41788.pdf + Revision Guide for AMD Family 12h Processors: + http://support.amd.com/us/Processor_TechDocs/44739.pdf + Revision Guide for AMD Family 14h Models 00h-0Fh Processors: + http://support.amd.com/us/Processor_TechDocs/47534.pdf + AMD Family 11h Processor Power and Thermal Data Sheet for Notebooks: + http://support.amd.com/us/Processor_TechDocs/43373.pdf + AMD Family 10h Server and Workstation Processor Power and Thermal Data Sheet: + http://support.amd.com/us/Processor_TechDocs/43374.pdf + AMD Family 10h Desktop Processor Power and Thermal Data Sheet: + http://support.amd.com/us/Processor_TechDocs/43375.pdf Author: Clemens Ladisch @@ -60,7 +95,7 @@ are using an AM3 processor on an AM2+ mainboard, you can safely use the There is one temperature measurement value, available as temp1_input in sysfs. It is measured in degrees Celsius with a resolution of 1/8th degree. -Please note that it is defined as a relative value; to quote the AMD manual: +Please note that it is defined as a relative value; to quote the AMD manual:: Tctl is the processor temperature control value, used by the platform to control cooling systems. Tctl is a non-physical temperature on an From a449dff630eb9a78d38c7db39428db8a9079b9ea Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 17 Apr 2019 06:46:10 -0300 Subject: [PATCH 097/125] docs: hwmon: vexpress: convert to ReST format Convert vexpress to ReST format, in order to allow it to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab Acked-by: Liviu Dudau Signed-off-by: Guenter Roeck --- Documentation/hwmon/vexpress | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/Documentation/hwmon/vexpress b/Documentation/hwmon/vexpress index 557d6d5ad90d..8c861c8151ac 100644 --- a/Documentation/hwmon/vexpress +++ b/Documentation/hwmon/vexpress @@ -2,14 +2,21 @@ Kernel driver vexpress ====================== Supported systems: + * ARM Ltd. Versatile Express platform + Prefix: 'vexpress' + Datasheets: + * "Hardware Description" sections of the Technical Reference Manuals - for the Versatile Express boards: - http://infocenter.arm.com/help/topic/com.arm.doc.subset.boards.express/index.html + for the Versatile Express boards: + + - http://infocenter.arm.com/help/topic/com.arm.doc.subset.boards.express/index.html + * Section "4.4.14. System Configuration registers" of the V2M-P1 TRM: - http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0447-/index.html + + - http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0447-/index.html Author: Pawel Moll From de6f291746075c1c6759747105cbca667f5abb8f Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 17 Apr 2019 06:46:11 -0300 Subject: [PATCH 098/125] docs: hwmon: menf21bmc: convert to ReST format Convert menf21bmc to ReST format, in order to allow it to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Guenter Roeck --- Documentation/hwmon/menf21bmc | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/hwmon/menf21bmc b/Documentation/hwmon/menf21bmc index 2a273a065c5e..1f0c6b2235ab 100644 --- a/Documentation/hwmon/menf21bmc +++ b/Documentation/hwmon/menf21bmc @@ -2,8 +2,11 @@ Kernel driver menf21bmc_hwmon ============================= Supported chips: + * MEN 14F021P00 + Prefix: 'menf21bmc_hwmon' + Adresses scanned: - Author: Andreas Werner @@ -34,6 +37,7 @@ Sysfs entries The following attributes are supported. All attributes are read only The Limits are read once by the driver. +=============== ========================== in0_input +3.3V input voltage in1_input +5.0V input voltage in2_input +12.0V input voltage @@ -48,3 +52,4 @@ in1_label "MON_5V" in2_label "MON_12V" in3_label "5V_STANDBY" in4_label "VBAT" +=============== ========================== From 42c027a5b7ba04224080ff46b6ef44658ad7554e Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 17 Apr 2019 06:46:12 -0300 Subject: [PATCH 099/125] docs: hwmon: sch5627: convert to ReST format Convert sch5627 to ReST format, in order to allow it to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Guenter Roeck --- Documentation/hwmon/sch5627 | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/hwmon/sch5627 b/Documentation/hwmon/sch5627 index 0551d266c51c..187682e99114 100644 --- a/Documentation/hwmon/sch5627 +++ b/Documentation/hwmon/sch5627 @@ -2,9 +2,13 @@ Kernel driver sch5627 ===================== Supported chips: + * SMSC SCH5627 + Prefix: 'sch5627' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Application Note available upon request Author: Hans de Goede From 92e395d7b1738f39cfa9f18b9bd77df8f4b7bc50 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 17 Apr 2019 06:46:13 -0300 Subject: [PATCH 100/125] docs: hwmon: emc2103: convert to ReST format Convert emc2103 to ReST format, in order to allow it to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Guenter Roeck --- Documentation/hwmon/emc2103 | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/Documentation/hwmon/emc2103 b/Documentation/hwmon/emc2103 index a12b2c127140..6a6ca6d1b34e 100644 --- a/Documentation/hwmon/emc2103 +++ b/Documentation/hwmon/emc2103 @@ -2,13 +2,17 @@ Kernel driver emc2103 ====================== Supported chips: + * SMSC EMC2103 + Addresses scanned: I2C 0x2e + Prefix: 'emc2103' + Datasheet: Not public Authors: - Steve Glendinning + Steve Glendinning Description ----------- From a9fc881b9bac7c4ae1e8569ba93e8600ce1a1c09 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 17 Apr 2019 06:46:14 -0300 Subject: [PATCH 101/125] docs: hwmon: pc87360: convert to ReST format Convert pc87360 to ReST format, in order to allow it to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Guenter Roeck --- Documentation/hwmon/pc87360 | 38 +++++++++++++++++++++++++------------ 1 file changed, 26 insertions(+), 12 deletions(-) diff --git a/Documentation/hwmon/pc87360 b/Documentation/hwmon/pc87360 index d5f5cf16ce59..4bad07bce54b 100644 --- a/Documentation/hwmon/pc87360 +++ b/Documentation/hwmon/pc87360 @@ -2,14 +2,19 @@ Kernel driver pc87360 ===================== Supported chips: + * National Semiconductor PC87360, PC87363, PC87364, PC87365 and PC87366 + Prefixes: 'pc87360', 'pc87363', 'pc87364', 'pc87365', 'pc87366' + Addresses scanned: none, address read from Super I/O config space + Datasheets: No longer available Authors: Jean Delvare Thanks to Sandeep Mehta, Tonko de Rooy and Daniel Ceregatti for testing. + Thanks to Rudolf Marek for helping me investigate conversion issues. @@ -17,11 +22,13 @@ Module Parameters ----------------- * init int - Chip initialization level: - 0: None - *1: Forcibly enable internal voltage and temperature channels, except in9 - 2: Forcibly enable all voltage and temperature channels, except in9 - 3: Forcibly enable all voltage and temperature channels, including in9 + Chip initialization level: + + - 0: None + - **1**: Forcibly enable internal voltage and temperature channels, + except in9 + - 2: Forcibly enable all voltage and temperature channels, except in9 + - 3: Forcibly enable all voltage and temperature channels, including in9 Note that this parameter has no effect for the PC87360, PC87363 and PC87364 chips. @@ -43,13 +50,15 @@ hardware monitoring chipsets, not only controlling and monitoring three fans, but also monitoring eleven voltage inputs and two (PC87365) or up to four (PC87366) temperatures. + =========== ======= ======= ======= ======= ===== Chip #vin #fan #pwm #temp devid - + =========== ======= ======= ======= ======= ===== PC87360 - 2 2 - 0xE1 PC87363 - 2 2 - 0xE8 PC87364 - 3 3 - 0xE4 PC87365 11 3 3 2 0xE5 PC87366 11 3 3 3-4 0xE9 + =========== ======= ======= ======= ======= ===== The driver assumes that no more than one chip is present, and one of the standard Super I/O addresses is used (0x2E/0x2F or 0x4E/0x4F) @@ -68,18 +77,23 @@ have to care no more. For reference, here are a few values about clock dividers: - slowest accuracy highest - measurable around 3000 accurate + =========== =============== =============== =========== + slowest accuracy highest + measurable around 3000 accurate divider speed (RPM) RPM (RPM) speed (RPM) - 1 1882 18 6928 - 2 941 37 4898 - 4 470 74 3464 - 8 235 150 2449 + =========== =============== =============== =========== + 1 1882 18 6928 + 2 941 37 4898 + 4 470 74 3464 + 8 235 150 2449 + =========== =============== =============== =========== For the curious, here is how the values above were computed: + * slowest measurable speed: clock/(255*divider) * accuracy around 3000 RPM: 3000^2/clock * highest accurate speed: sqrt(clock*100) + The clock speed for the PC87360 family is 480 kHz. I arbitrarily chose 100 RPM as the lowest acceptable accuracy. From b413e3fa7fb05a8eea42473456b863c3b2a5511d Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 17 Apr 2019 06:46:15 -0300 Subject: [PATCH 102/125] docs: hwmon: fam15h_power: convert to ReST format Convert fam15h_power to ReST format, in order to allow it to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Guenter Roeck --- Documentation/hwmon/fam15h_power | 85 +++++++++++++++++++++----------- 1 file changed, 57 insertions(+), 28 deletions(-) diff --git a/Documentation/hwmon/fam15h_power b/Documentation/hwmon/fam15h_power index fb594c281c46..fdde632c93a3 100644 --- a/Documentation/hwmon/fam15h_power +++ b/Documentation/hwmon/fam15h_power @@ -2,15 +2,20 @@ Kernel driver fam15h_power ========================== Supported chips: + * AMD Family 15h Processors + * AMD Family 16h Processors Prefix: 'fam15h_power' + Addresses scanned: PCI space + Datasheets: - BIOS and Kernel Developer's Guide (BKDG) For AMD Family 15h Processors - BIOS and Kernel Developer's Guide (BKDG) For AMD Family 16h Processors - AMD64 Architecture Programmer's Manual Volume 2: System Programming + + - BIOS and Kernel Developer's Guide (BKDG) For AMD Family 15h Processors + - BIOS and Kernel Developer's Guide (BKDG) For AMD Family 16h Processors + - AMD64 Architecture Programmer's Manual Volume 2: System Programming Author: Andreas Herrmann @@ -31,14 +36,19 @@ For AMD Family 15h and 16h processors the following power values can be calculated using different processor northbridge function registers: -* BasePwrWatts: Specifies in watts the maximum amount of power - consumed by the processor for NB and logic external to the core. -* ProcessorPwrWatts: Specifies in watts the maximum amount of power - the processor can support. -* CurrPwrWatts: Specifies in watts the current amount of power being - consumed by the processor. +* BasePwrWatts: + Specifies in watts the maximum amount of power + consumed by the processor for NB and logic external to the core. + +* ProcessorPwrWatts: + Specifies in watts the maximum amount of power + the processor can support. +* CurrPwrWatts: + Specifies in watts the current amount of power being + consumed by the processor. This driver provides ProcessorPwrWatts and CurrPwrWatts: + * power1_crit (ProcessorPwrWatts) * power1_input (CurrPwrWatts) @@ -53,35 +63,53 @@ calculate the average power consumed by a processor during a measurement interval Tm. The feature of accumulated power mechanism is indicated by CPUID Fn8000_0007_EDX[12]. -* Tsample: compute unit power accumulator sample period -* Tref: the PTSC counter period -* PTSC: performance timestamp counter -* N: the ratio of compute unit power accumulator sample period to the - PTSC period -* Jmax: max compute unit accumulated power which is indicated by - MaxCpuSwPwrAcc MSR C001007b -* Jx/Jy: compute unit accumulated power which is indicated by - CpuSwPwrAcc MSR C001007a -* Tx/Ty: the value of performance timestamp counter which is indicated - by CU_PTSC MSR C0010280 -* PwrCPUave: CPU average power +* Tsample: + compute unit power accumulator sample period + +* Tref: + the PTSC counter period + +* PTSC: + performance timestamp counter + +* N: + the ratio of compute unit power accumulator sample period to the + PTSC period + +* Jmax: + max compute unit accumulated power which is indicated by + MaxCpuSwPwrAcc MSR C001007b + +* Jx/Jy: + compute unit accumulated power which is indicated by + CpuSwPwrAcc MSR C001007a +* Tx/Ty: + the value of performance timestamp counter which is indicated + by CU_PTSC MSR C0010280 + +* PwrCPUave: + CPU average power i. Determine the ratio of Tsample to Tref by executing CPUID Fn8000_0007. + N = value of CPUID Fn8000_0007_ECX[CpuPwrSampleTimeRatio[15:0]]. ii. Read the full range of the cumulative energy value from the new -MSR MaxCpuSwPwrAcc. + MSR MaxCpuSwPwrAcc. + Jmax = value returned. + iii. At time x, SW reads CpuSwPwrAcc MSR and samples the PTSC. - Jx = value read from CpuSwPwrAcc and Tx = value read from -PTSC. + + Jx = value read from CpuSwPwrAcc and Tx = value read from PTSC. iv. At time y, SW reads CpuSwPwrAcc MSR and samples the PTSC. - Jy = value read from CpuSwPwrAcc and Ty = value read from -PTSC. + + Jy = value read from CpuSwPwrAcc and Ty = value read from PTSC. v. Calculate the average power consumption for a compute unit over -time period (y-x). Unit of result is uWatt. + time period (y-x). Unit of result is uWatt:: + if (Jy < Jx) // Rollover has occurred Jdelta = (Jy + Jmax) - Jx else @@ -90,13 +118,14 @@ time period (y-x). Unit of result is uWatt. This driver provides PwrCPUave and interval(default is 10 millisecond and maximum is 1 second): + * power1_average (PwrCPUave) * power1_average_interval (Interval) The power1_average_interval can be updated at /etc/sensors3.conf file as below: -chip "fam15h_power-*" +chip `fam15h_power-*` set power1_average_interval 0.01 Then save it with "sensors -s". From ce09cfb600d373f338809379de5de40fedf9532c Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 17 Apr 2019 06:46:16 -0300 Subject: [PATCH 103/125] docs: hwmon: w83791d: convert to ReST format Convert w83791d to ReST format, in order to allow it to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Guenter Roeck --- Documentation/hwmon/w83791d | 123 +++++++++++++++++++++--------------- 1 file changed, 71 insertions(+), 52 deletions(-) diff --git a/Documentation/hwmon/w83791d b/Documentation/hwmon/w83791d index f4021a285460..a91f9e5fb0c6 100644 --- a/Documentation/hwmon/w83791d +++ b/Documentation/hwmon/w83791d @@ -2,9 +2,13 @@ Kernel driver w83791d ===================== Supported chips: + * Winbond W83791D + Prefix: 'w83791d' + Addresses scanned: I2C 0x2c - 0x2f + Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83791D_W83791Gb.pdf Author: Charles Spirakis @@ -12,39 +16,46 @@ Author: Charles Spirakis This driver was derived from the w83781d.c and w83792d.c source files. Credits: + w83781d.c: - Frodo Looijaard , - Philip Edelbrock , - and Mark Studebaker + + - Frodo Looijaard , + - Philip Edelbrock , + - Mark Studebaker + w83792d.c: - Shane Huang (Winbond), - Rudolf Marek + + - Shane Huang (Winbond), + - Rudolf Marek Additional contributors: - Sven Anders - Marc Hulsman + + - Sven Anders + - Marc Hulsman Module Parameters ----------------- * init boolean - (default 0) - Use 'init=1' to have the driver do extra software initializations. - The default behavior is to do the minimum initialization possible - and depend on the BIOS to properly setup the chip. If you know you - have a w83791d and you're having problems, try init=1 before trying - reset=1. + (default 0) + + Use 'init=1' to have the driver do extra software initializations. + The default behavior is to do the minimum initialization possible + and depend on the BIOS to properly setup the chip. If you know you + have a w83791d and you're having problems, try init=1 before trying + reset=1. * reset boolean - (default 0) - Use 'reset=1' to reset the chip (via index 0x40, bit 7). The default - behavior is no chip reset to preserve BIOS settings. + (default 0) + + Use 'reset=1' to reset the chip (via index 0x40, bit 7). The default + behavior is no chip reset to preserve BIOS settings. * force_subclients=bus,caddr,saddr,saddr - This is used to force the i2c addresses for subclients of - a certain chip. Example usage is `force_subclients=0,0x2f,0x4a,0x4b' - to force the subclients of chip 0x2f on bus 0 to i2c addresses - 0x4a and 0x4b. + This is used to force the i2c addresses for subclients of + a certain chip. Example usage is `force_subclients=0,0x2f,0x4a,0x4b` + to force the subclients of chip 0x2f on bus 0 to i2c addresses + 0x4a and 0x4b. Description @@ -91,11 +102,11 @@ This file is used for both legacy and new code. The sysfs interface to the beep bitmask has migrated from the original legacy method of a single sysfs beep_mask file to a newer method using multiple -*_beep files as described in .../Documentation/hwmon/sysfs-interface. +`*_beep` files as described in `Documentation/hwmon/sysfs-interface`. A similar change has occurred for the bitmap corresponding to the alarms. The original legacy method used a single sysfs alarms file containing a bitmap -of triggered alarms. The newer method uses multiple sysfs *_alarm files +of triggered alarms. The newer method uses multiple sysfs `*_alarm` files (again following the pattern described in sysfs-interface). Since both methods read and write the underlying hardware, they can be used @@ -116,46 +127,54 @@ User mode code requesting values more often will receive cached values. The sysfs-interface is documented in the 'sysfs-interface' file. Only chip-specific options are documented here. -pwm[1-3]_enable - this file controls mode of fan/temperature control for +======================= ======================================================= +pwm[1-3]_enable this file controls mode of fan/temperature control for fan 1-3. Fan/PWM 4-5 only support manual mode. - * 1 Manual mode - * 2 Thermal Cruise mode - * 3 Fan Speed Cruise mode (no further support) -temp[1-3]_target - defines the target temperature for Thermal Cruise mode. + * 1 Manual mode + * 2 Thermal Cruise mode + * 3 Fan Speed Cruise mode (no further support) + +temp[1-3]_target defines the target temperature for Thermal Cruise mode. Unit: millidegree Celsius RW -temp[1-3]_tolerance - temperature tolerance for Thermal Cruise mode. +temp[1-3]_tolerance temperature tolerance for Thermal Cruise mode. Specifies an interval around the target temperature in which the fan speed is not changed. Unit: millidegree Celsius RW +======================= ======================================================= Alarms bitmap vs. beep_mask bitmask ------------------------------------- +----------------------------------- + For legacy code using the alarms and beep_mask files: -in0 (VCORE) : alarms: 0x000001 beep_mask: 0x000001 -in1 (VINR0) : alarms: 0x000002 beep_mask: 0x002000 <== mismatch -in2 (+3.3VIN): alarms: 0x000004 beep_mask: 0x000004 -in3 (5VDD) : alarms: 0x000008 beep_mask: 0x000008 -in4 (+12VIN) : alarms: 0x000100 beep_mask: 0x000100 -in5 (-12VIN) : alarms: 0x000200 beep_mask: 0x000200 -in6 (-5VIN) : alarms: 0x000400 beep_mask: 0x000400 -in7 (VSB) : alarms: 0x080000 beep_mask: 0x010000 <== mismatch -in8 (VBAT) : alarms: 0x100000 beep_mask: 0x020000 <== mismatch -in9 (VINR1) : alarms: 0x004000 beep_mask: 0x004000 -temp1 : alarms: 0x000010 beep_mask: 0x000010 -temp2 : alarms: 0x000020 beep_mask: 0x000020 -temp3 : alarms: 0x002000 beep_mask: 0x000002 <== mismatch -fan1 : alarms: 0x000040 beep_mask: 0x000040 -fan2 : alarms: 0x000080 beep_mask: 0x000080 -fan3 : alarms: 0x000800 beep_mask: 0x000800 -fan4 : alarms: 0x200000 beep_mask: 0x200000 -fan5 : alarms: 0x400000 beep_mask: 0x400000 -tart1 : alarms: 0x010000 beep_mask: 0x040000 <== mismatch -tart2 : alarms: 0x020000 beep_mask: 0x080000 <== mismatch -tart3 : alarms: 0x040000 beep_mask: 0x100000 <== mismatch -case_open : alarms: 0x001000 beep_mask: 0x001000 -global_enable: alarms: -------- beep_mask: 0x800000 (modified via beep_enable) +============= ======== ========= ========================== +Signal Alarms beep_mask Obs +============= ======== ========= ========================== +in0 (VCORE) 0x000001 0x000001 +in1 (VINR0) 0x000002 0x002000 <== mismatch +in2 (+3.3VIN) 0x000004 0x000004 +in3 (5VDD) 0x000008 0x000008 +in4 (+12VIN) 0x000100 0x000100 +in5 (-12VIN) 0x000200 0x000200 +in6 (-5VIN) 0x000400 0x000400 +in7 (VSB) 0x080000 0x010000 <== mismatch +in8 (VBAT) 0x100000 0x020000 <== mismatch +in9 (VINR1) 0x004000 0x004000 +temp1 0x000010 0x000010 +temp2 0x000020 0x000020 +temp3 0x002000 0x000002 <== mismatch +fan1 0x000040 0x000040 +fan2 0x000080 0x000080 +fan3 0x000800 0x000800 +fan4 0x200000 0x200000 +fan5 0x400000 0x400000 +tart1 0x010000 0x040000 <== mismatch +tart2 0x020000 0x080000 <== mismatch +tart3 0x040000 0x100000 <== mismatch +case_open 0x001000 0x001000 +global_enable - 0x800000 (modified via beep_enable) +============= ======== ========= ========================== From 270efaa46c2e354a13d03ce08a5e29596ce50a86 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 17 Apr 2019 06:46:17 -0300 Subject: [PATCH 104/125] docs: hwmon: coretemp: convert to ReST format Convert coretemp to ReST format, in order to allow it to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Guenter Roeck --- Documentation/hwmon/coretemp | 46 +++++++++++++++++++++++------------- 1 file changed, 30 insertions(+), 16 deletions(-) diff --git a/Documentation/hwmon/coretemp b/Documentation/hwmon/coretemp index fec5a9bf755f..c609329e3bc4 100644 --- a/Documentation/hwmon/coretemp +++ b/Documentation/hwmon/coretemp @@ -3,20 +3,29 @@ Kernel driver coretemp Supported chips: * All Intel Core family + Prefix: 'coretemp' - CPUID: family 0x6, models 0xe (Pentium M DC), 0xf (Core 2 DC 65nm), - 0x16 (Core 2 SC 65nm), 0x17 (Penryn 45nm), - 0x1a (Nehalem), 0x1c (Atom), 0x1e (Lynnfield), - 0x26 (Tunnel Creek Atom), 0x27 (Medfield Atom), - 0x36 (Cedar Trail Atom) - Datasheet: Intel 64 and IA-32 Architectures Software Developer's Manual - Volume 3A: System Programming Guide - http://softwarecommunity.intel.com/Wiki/Mobility/720.htm + + CPUID: family 0x6, models + + - 0xe (Pentium M DC), 0xf (Core 2 DC 65nm), + - 0x16 (Core 2 SC 65nm), 0x17 (Penryn 45nm), + - 0x1a (Nehalem), 0x1c (Atom), 0x1e (Lynnfield), + - 0x26 (Tunnel Creek Atom), 0x27 (Medfield Atom), + - 0x36 (Cedar Trail Atom) + + Datasheet: + + Intel 64 and IA-32 Architectures Software Developer's Manual + Volume 3A: System Programming Guide + + http://softwarecommunity.intel.com/Wiki/Mobility/720.htm Author: Rudolf Marek Description ----------- + This driver permits reading the DTS (Digital Temperature Sensor) embedded inside Intel CPUs. This driver can read both the per-core and per-package temperature using the appropriate sensors. The per-package sensor is new; @@ -35,14 +44,17 @@ may be raised, if the temperature grows enough (more than TjMax) to trigger the Out-Of-Spec bit. Following table summarizes the exported sysfs files: All Sysfs entries are named with their core_id (represented here by 'X'). -tempX_input - Core temperature (in millidegrees Celsius). -tempX_max - All cooling devices should be turned on (on Core2). -tempX_crit - Maximum junction temperature (in millidegrees Celsius). -tempX_crit_alarm - Set when Out-of-spec bit is set, never clears. - Correct CPU operation is no longer guaranteed. -tempX_label - Contains string "Core X", where X is processor - number. For Package temp, this will be "Physical id Y", - where Y is the package number. + +================= ======================================================== +tempX_input Core temperature (in millidegrees Celsius). +tempX_max All cooling devices should be turned on (on Core2). +tempX_crit Maximum junction temperature (in millidegrees Celsius). +tempX_crit_alarm Set when Out-of-spec bit is set, never clears. + Correct CPU operation is no longer guaranteed. +tempX_label Contains string "Core X", where X is processor + number. For Package temp, this will be "Physical id Y", + where Y is the package number. +================= ======================================================== On CPU models which support it, TjMax is read from a model-specific register. On other models, it is set to an arbitrary value based on weak heuristics. @@ -52,6 +64,7 @@ as a module parameter (tjmax). Appendix A. Known TjMax lists (TBD): Some information comes from ark.intel.com +=============== =============================================== ================ Process Processor TjMax(C) 22nm Core i5/i7 Processors @@ -179,3 +192,4 @@ Process Processor TjMax(C) 65nm Celeron Processors T1700/1600 100 560/550/540/530 100 +=============== =============================================== ================ From 9e929c6745da58ab64d2d462ba46b661c03d2060 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 17 Apr 2019 06:46:18 -0300 Subject: [PATCH 105/125] docs: hwmon: aspeed-pwm-tacho: convert to ReST format Convert aspeed-pwm-tacho to ReST format, in order to allow it to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab Acked-by: Andrew Jeffery Signed-off-by: Guenter Roeck --- Documentation/hwmon/aspeed-pwm-tacho | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/hwmon/aspeed-pwm-tacho b/Documentation/hwmon/aspeed-pwm-tacho index 7cfb34977460..6dcec845fbc7 100644 --- a/Documentation/hwmon/aspeed-pwm-tacho +++ b/Documentation/hwmon/aspeed-pwm-tacho @@ -15,8 +15,10 @@ controller supports up to 16 tachometer inputs. The driver provides the following sensor accesses in sysfs: +=============== ======= ===================================================== fanX_input ro provide current fan rotation value in RPM as reported by the fan to the device. pwmX rw get or set PWM fan control value. This is an integer value between 0(off) and 255(full speed). +=============== ======= ===================================================== From a4710b72190a5ee1953ffba60cdbdced52a28466 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 17 Apr 2019 06:46:19 -0300 Subject: [PATCH 106/125] docs: hwmon: ibmpowernv: convert to ReST format Convert ibmpowernv to ReST format, in order to allow it to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Guenter Roeck --- Documentation/hwmon/ibmpowernv | 31 +++++++++++++++++++------------ 1 file changed, 19 insertions(+), 12 deletions(-) diff --git a/Documentation/hwmon/ibmpowernv b/Documentation/hwmon/ibmpowernv index 56468258711f..5d642bc3dec0 100644 --- a/Documentation/hwmon/ibmpowernv +++ b/Documentation/hwmon/ibmpowernv @@ -2,6 +2,7 @@ Kernel Driver IBMPOWERNV ======================== Supported systems: + * Any recent IBM P servers based on POWERNV platform Author: Neelesh Gupta @@ -29,10 +30,11 @@ CONFIG_SENSORS_IBMPOWERNV. It can also be built as module 'ibmpowernv'. Sysfs attributes ---------------- +======================= ======================================================= fanX_input Measured RPM value. fanX_min Threshold RPM for alert generation. -fanX_fault 0: No fail condition - 1: Failing fan +fanX_fault - 0: No fail condition + - 1: Failing fan tempX_input Measured ambient temperature. tempX_max Threshold ambient temperature for alert generation. @@ -42,20 +44,22 @@ tempX_enable Enable/disable all temperature sensors belonging to the sub-group. In POWER9, this attribute corresponds to each OCC. Using this attribute each OCC can be asked to disable/enable all of its temperature sensors. - 1: Enable - 0: Disable + + - 1: Enable + - 0: Disable inX_input Measured power supply voltage (millivolt) -inX_fault 0: No fail condition. - 1: Failing power supply. +inX_fault - 0: No fail condition. + - 1: Failing power supply. inX_highest Historical maximum voltage inX_lowest Historical minimum voltage inX_enable Enable/disable all voltage sensors belonging to the sub-group. In POWER9, this attribute corresponds to each OCC. Using this attribute each OCC can be asked to disable/enable all of its voltage sensors. - 1: Enable - 0: Disable + + - 1: Enable + - 0: Disable powerX_input Power consumption (microWatt) powerX_input_highest Historical maximum power @@ -64,8 +68,9 @@ powerX_enable Enable/disable all power sensors belonging to the sub-group. In POWER9, this attribute corresponds to each OCC. Using this attribute each OCC can be asked to disable/enable all of its power sensors. - 1: Enable - 0: Disable + + - 1: Enable + - 0: Disable currX_input Measured current (milliampere) currX_highest Historical maximum current @@ -74,7 +79,9 @@ currX_enable Enable/disable all current sensors belonging to the sub-group. In POWER9, this attribute corresponds to each OCC. Using this attribute each OCC can be asked to disable/enable all of its current sensors. - 1: Enable - 0: Disable + + - 1: Enable + - 0: Disable energyX_input Cumulative energy (microJoule) +======================= ======================================================= From 1288cfe0437e3affee6cccc68e288eb6492c1f8b Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 17 Apr 2019 06:46:20 -0300 Subject: [PATCH 107/125] docs: hwmon: asc7621: convert to ReST format Convert asc7621 to ReST format, in order to allow it to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Guenter Roeck --- Documentation/hwmon/asc7621 | 146 ++++++++++++++++++++++-------------- 1 file changed, 88 insertions(+), 58 deletions(-) diff --git a/Documentation/hwmon/asc7621 b/Documentation/hwmon/asc7621 index 7287be7e1f21..b5a9fad0f172 100644 --- a/Documentation/hwmon/asc7621 +++ b/Documentation/hwmon/asc7621 @@ -1,10 +1,15 @@ +===================== Kernel driver asc7621 -================== +===================== Supported chips: + Andigilog aSC7621 and aSC7621a + Prefix: 'asc7621' + Addresses scanned: I2C 0x2c, 0x2d, 0x2e + Datasheet: http://www.fairview5.com/linux/asc7621/asc7621.pdf Author: @@ -73,8 +78,10 @@ Finally, we have added a tach disable function that turns off the tach measurement system for individual tachs in order to save power. That is in register 75h. --- +-------------------------------------------------------------------------- + aSC7621 Product Description +=========================== The aSC7621 has a two wire digital interface compatible with SMBus 2.0. Using a 10-bit ADC, the aSC7621 measures the temperature of two remote diode @@ -102,6 +109,8 @@ System voltages of VCCP, 2.5V, 3.3V, 5.0V, and 12V motherboard power are monitored efficiently with internal scaling resistors. Features +-------- + - Supports PECI interface and monitors internal and remote thermal diodes - 2-wire, SMBus 2.0 compliant, serial interface - 10-bit ADC @@ -110,7 +119,7 @@ Features - Noise filtering of temperature reading for fan speed control - 0.25C digital temperature sensor resolution - 3 PWM fan speed control outputs for 2-, 3- or 4-wire fans and up to 4 fan - tachometer inputs + tachometer inputs - Enhanced measured temperature to Temperature Zone assignment. - Provides high and low PWM frequency ranges - 3 GPIO pins for custom use @@ -123,17 +132,20 @@ Except where noted below, the sysfs entries created by this driver follow the standards defined in "sysfs-interface". temp1_source + = =============================================== 0 (default) peci_legacy = 0, Remote 1 Temperature - peci_legacy = 1, PECI Processor Temperature 0 + peci_legacy = 1, PECI Processor Temperature 0 1 Remote 1 Temperature 2 Remote 2 Temperature 3 Internal Temperature 4 PECI Processor Temperature 0 5 PECI Processor Temperature 1 6 PECI Processor Temperature 2 - 7 PECI Processor Temperature 3 + 7 PECI Processor Temperature 3 + = =============================================== temp2_source + = =============================================== 0 (default) Internal Temperature 1 Remote 1 Temperature 2 Remote 2 Temperature @@ -142,8 +154,10 @@ temp2_source 5 PECI Processor Temperature 1 6 PECI Processor Temperature 2 7 PECI Processor Temperature 3 + = =============================================== temp3_source + = =============================================== 0 (default) Remote 2 Temperature 1 Remote 1 Temperature 2 Remote 2 Temperature @@ -152,10 +166,12 @@ temp3_source 5 PECI Processor Temperature 1 6 PECI Processor Temperature 2 7 PECI Processor Temperature 3 + = =============================================== temp4_source + = =============================================== 0 (default) peci_legacy = 0, PECI Processor Temperature 0 - peci_legacy = 1, Remote 1 Temperature + peci_legacy = 1, Remote 1 Temperature 1 Remote 1 Temperature 2 Remote 2 Temperature 3 Internal Temperature @@ -163,58 +179,65 @@ temp4_source 5 PECI Processor Temperature 1 6 PECI Processor Temperature 2 7 PECI Processor Temperature 3 + = =============================================== -temp[1-4]_smoothing_enable -temp[1-4]_smoothing_time +temp[1-4]_smoothing_enable / temp[1-4]_smoothing_time Smooths spikes in temp readings caused by noise. Valid values in milliseconds are: - 35000 - 17600 - 11800 - 7000 - 4400 - 3000 - 1600 - 800 + + * 35000 + * 17600 + * 11800 + * 7000 + * 4400 + * 3000 + * 1600 + * 800 temp[1-4]_crit When the corresponding zone temperature reaches this value, ALL pwm outputs will got to 100%. -temp[5-8]_input -temp[5-8]_enable +temp[5-8]_input / temp[5-8]_enable The aSC7621 can also read temperatures provided by the processor via the PECI bus. Usually these are "core" temps and are relative to the point where the automatic thermal control circuit starts throttling. This means that these are usually negative numbers. pwm[1-3]_enable + =============== ======================================================== 0 Fan off. 1 Fan on manual control. 2 Fan on automatic control and will run at the minimum pwm - if the temperature for the zone is below the minimum. - 3 Fan on automatic control but will be off if the temperature - for the zone is below the minimum. - 4-254 Ignored. + if the temperature for the zone is below the minimum. + 3 Fan on automatic control but will be off if the + temperature for the zone is below the minimum. + 4-254 Ignored. 255 Fan on full. + =============== ======================================================== pwm[1-3]_auto_channels Bitmap as described in sysctl-interface with the following exceptions... + Only the following combination of zones (and their corresponding masks) are valid: - 1 - 2 - 3 - 2,3 - 1,2,3 - 4 - 1,2,3,4 - Special values: - 0 Disabled. - 16 Fan on manual control. - 31 Fan on full. + * 1 + * 2 + * 3 + * 2,3 + * 1,2,3 + * 4 + * 1,2,3,4 + + * Special values: + + == ====================== + 0 Disabled. + 16 Fan on manual control. + 31 Fan on full. + == ====================== pwm[1-3]_invert @@ -226,22 +249,22 @@ pwm[1-3]_freq PWM frequency in Hz Valid values in Hz are: - 10 - 15 - 23 - 30 (default) - 38 - 47 - 62 - 94 - 23000 - 24000 - 25000 - 26000 - 27000 - 28000 - 29000 - 30000 + * 10 + * 15 + * 23 + * 30 (default) + * 38 + * 47 + * 62 + * 94 + * 23000 + * 24000 + * 25000 + * 26000 + * 27000 + * 28000 + * 29000 + * 30000 Setting any other value will be ignored. @@ -251,17 +274,17 @@ peci_enable peci_avg Input filter average time. - 0 0 Sec. (no Smoothing) (default) - 1 0.25 Sec. - 2 0.5 Sec. - 3 1.0 Sec. - 4 2.0 Sec. - 5 4.0 Sec. - 6 8.0 Sec. - 7 0.0 Sec. + * 0 0 Sec. (no Smoothing) (default) + * 1 0.25 Sec. + * 2 0.5 Sec. + * 3 1.0 Sec. + * 4 2.0 Sec. + * 5 4.0 Sec. + * 6 8.0 Sec. + * 7 0.0 Sec. peci_legacy - + = ============================================ 0 Standard Mode (default) Remote Diode 1 reading is associated with Temperature Zone 1, PECI is associated with @@ -270,10 +293,12 @@ peci_legacy 1 Legacy Mode PECI is associated with Temperature Zone 1, Remote Diode 1 is associated with Zone 4 + = ============================================ peci_diode Diode filter + = ==================== 0 0.25 Sec. 1 1.1 Sec. 2 2.4 Sec. (default) @@ -282,15 +307,20 @@ peci_diode 5 6.8 Sec. 6 10.2 Sec. 7 16.4 Sec. + = ==================== peci_4domain Four domain enable + = =============================================== 0 1 or 2 Domains for enabled processors (default) 1 3 or 4 Domains for enabled processors + = =============================================== peci_domain Domain + = ================================================== 0 Processor contains a single domain (0) (default) 1 Processor contains two domains (0,1) + = ================================================== From 33ffc74ffa3d7ae9946524dfeaea6f4b251909a5 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 17 Apr 2019 06:46:21 -0300 Subject: [PATCH 108/125] docs: hwmon: ads1015: convert to ReST format Convert ads1015 to ReST format, in order to allow it to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Guenter Roeck --- Documentation/hwmon/ads1015 | 76 ++++++++++++++++++++++--------------- 1 file changed, 45 insertions(+), 31 deletions(-) diff --git a/Documentation/hwmon/ads1015 b/Documentation/hwmon/ads1015 index 02d2a459385f..e0951c4e57bb 100644 --- a/Documentation/hwmon/ads1015 +++ b/Documentation/hwmon/ads1015 @@ -2,17 +2,25 @@ Kernel driver ads1015 ===================== Supported chips: + * Texas Instruments ADS1015 + Prefix: 'ads1015' - Datasheet: Publicly available at the Texas Instruments website : - http://focus.ti.com/lit/ds/symlink/ads1015.pdf + + Datasheet: Publicly available at the Texas Instruments website: + + http://focus.ti.com/lit/ds/symlink/ads1015.pdf + * Texas Instruments ADS1115 + Prefix: 'ads1115' - Datasheet: Publicly available at the Texas Instruments website : - http://focus.ti.com/lit/ds/symlink/ads1115.pdf + + Datasheet: Publicly available at the Texas Instruments website: + + http://focus.ti.com/lit/ds/symlink/ads1115.pdf Authors: - Dirk Eibach, Guntermann & Drunck GmbH + Dirk Eibach, Guntermann & Drunck GmbH Description ----------- @@ -24,14 +32,15 @@ This device is a 12/16-bit A-D converter with 4 inputs. The inputs can be used single ended or in certain differential combinations. The inputs can be made available by 8 sysfs input files in0_input - in7_input: -in0: Voltage over AIN0 and AIN1. -in1: Voltage over AIN0 and AIN3. -in2: Voltage over AIN1 and AIN3. -in3: Voltage over AIN2 and AIN3. -in4: Voltage over AIN0 and GND. -in5: Voltage over AIN1 and GND. -in6: Voltage over AIN2 and GND. -in7: Voltage over AIN3 and GND. + + - in0: Voltage over AIN0 and AIN1. + - in1: Voltage over AIN0 and AIN3. + - in2: Voltage over AIN1 and AIN3. + - in3: Voltage over AIN2 and AIN3. + - in4: Voltage over AIN0 and GND. + - in5: Voltage over AIN1 and GND. + - in6: Voltage over AIN2 and GND. + - in7: Voltage over AIN3 and GND. Which inputs are available can be configured using platform data or devicetree. @@ -42,29 +51,34 @@ Platform Data In linux/platform_data/ads1015.h platform data is defined, channel_data contains configuration data for the used input combinations: -- pga is the programmable gain amplifier (values are full scale) - 0: +/- 6.144 V - 1: +/- 4.096 V - 2: +/- 2.048 V - 3: +/- 1.024 V - 4: +/- 0.512 V - 5: +/- 0.256 V -- data_rate in samples per second - 0: 128 - 1: 250 - 2: 490 - 3: 920 - 4: 1600 - 5: 2400 - 6: 3300 -Example: -struct ads1015_platform_data data = { +- pga is the programmable gain amplifier (values are full scale) + + - 0: +/- 6.144 V + - 1: +/- 4.096 V + - 2: +/- 2.048 V + - 3: +/- 1.024 V + - 4: +/- 0.512 V + - 5: +/- 0.256 V + +- data_rate in samples per second + + - 0: 128 + - 1: 250 + - 2: 490 + - 3: 920 + - 4: 1600 + - 5: 2400 + - 6: 3300 + +Example:: + + struct ads1015_platform_data data = { .channel_data = { [2] = { .enabled = true, .pga = 1, .data_rate = 0 }, [4] = { .enabled = true, .pga = 4, .data_rate = 5 }, } -}; + }; In this case only in2_input (FS +/- 4.096 V, 128 SPS) and in4_input (FS +/- 0.512 V, 2400 SPS) would be created. From cdc39b091b9d756d62edb74d23a62bd6dba0453d Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 17 Apr 2019 06:46:22 -0300 Subject: [PATCH 109/125] docs: hwmon: dme1737, vt1211: convert to ReST format Convert dme1737 and vt1211 to ReST format, in order to allow them to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Guenter Roeck --- Documentation/hwmon/dme1737 | 88 ++++++++++++++++++++++++++----------- Documentation/hwmon/vt1211 | 84 +++++++++++++++++++++-------------- 2 files changed, 114 insertions(+), 58 deletions(-) diff --git a/Documentation/hwmon/dme1737 b/Documentation/hwmon/dme1737 index 4d2935145a1c..82fcbc6b2b43 100644 --- a/Documentation/hwmon/dme1737 +++ b/Documentation/hwmon/dme1737 @@ -2,21 +2,37 @@ Kernel driver dme1737 ===================== Supported chips: + * SMSC DME1737 and compatibles (like Asus A8000) + Prefix: 'dme1737' + Addresses scanned: I2C 0x2c, 0x2d, 0x2e + Datasheet: Provided by SMSC upon request and under NDA + * SMSC SCH3112, SCH3114, SCH3116 + Prefix: 'sch311x' + Addresses scanned: none, address read from Super-I/O config space + Datasheet: Available on the Internet + * SMSC SCH5027 + Prefix: 'sch5027' + Addresses scanned: I2C 0x2c, 0x2d, 0x2e + Datasheet: Provided by SMSC upon request and under NDA + * SMSC SCH5127 + Prefix: 'sch5127' + Addresses scanned: none, address read from Super-I/O config space + Datasheet: Provided by SMSC upon request and under NDA Authors: @@ -26,11 +42,14 @@ Authors: Module Parameters ----------------- -* force_start: bool Enables the monitoring of voltage, fan and temp inputs +* force_start: bool + Enables the monitoring of voltage, fan and temp inputs and PWM output control functions. Using this parameter shouldn't be required since the BIOS usually takes care of this. -* probe_all_addr: bool Include non-standard LPC addresses 0x162e and 0x164e + +* probe_all_addr: bool + Include non-standard LPC addresses 0x162e and 0x164e when probing for ISA devices. This is required for the following boards: - VIA EPIA SN18000 @@ -70,7 +89,8 @@ scaling resistors. The values returned by the driver therefore reflect true millivolts and don't need scaling. The voltage inputs are mapped as follows (the last column indicates the input ranges): -DME1737, A8000: +DME1737, A8000:: + in0: +5VTR (+5V standby) 0V - 6.64V in1: Vccp (processor core) 0V - 3V in2: VCC (internal +3.3V) 0V - 4.38V @@ -79,7 +99,8 @@ DME1737, A8000: in5: VTR (+3.3V standby) 0V - 4.38V in6: Vbat (+3.0V) 0V - 4.38V -SCH311x: +SCH311x:: + in0: +2.5V 0V - 3.32V in1: Vccp (processor core) 0V - 2V in2: VCC (internal +3.3V) 0V - 4.38V @@ -88,7 +109,8 @@ SCH311x: in5: VTR (+3.3V standby) 0V - 4.38V in6: Vbat (+3.0V) 0V - 4.38V -SCH5027: +SCH5027:: + in0: +5VTR (+5V standby) 0V - 6.64V in1: Vccp (processor core) 0V - 3V in2: VCC (internal +3.3V) 0V - 4.38V @@ -97,7 +119,8 @@ SCH5027: in5: VTR (+3.3V standby) 0V - 4.38V in6: Vbat (+3.0V) 0V - 4.38V -SCH5127: +SCH5127:: + in0: +2.5 0V - 3.32V in1: Vccp (processor core) 0V - 3V in2: VCC (internal +3.3V) 0V - 4.38V @@ -119,7 +142,7 @@ Celsius. The chip also features offsets for all 3 temperature inputs which - when programmed - get added to the input readings. The chip does all the scaling by itself and the driver therefore reports true temperatures that don't need any user-space adjustments. The temperature inputs are mapped as follows -(the last column indicates the input ranges): +(the last column indicates the input ranges):: temp1: Remote diode 1 (3904 type) temperature -127C - +127C temp2: DME1737 internal temperature -127C - +127C @@ -171,6 +194,7 @@ pwm[1-3]_auto_pwm_min, respectively. The thermal thresholds of the zones are programmed via zone[1-3]_auto_point[1-3]_temp and zone[1-3]_auto_point1_temp_hyst: + =============================== ======================================= pwm[1-3]_auto_point2_pwm full-speed duty-cycle (255, i.e., 100%) pwm[1-3]_auto_point1_pwm low-speed duty-cycle pwm[1-3]_auto_pwm_min min-speed duty-cycle @@ -179,6 +203,7 @@ zone[1-3]_auto_point1_temp_hyst: zone[1-3]_auto_point2_temp full-speed temp zone[1-3]_auto_point1_temp low-speed temp zone[1-3]_auto_point1_temp_hyst min-speed temp + =============================== ======================================= The chip adjusts the output duty-cycle linearly in the range of auto_point1_pwm to auto_point2_pwm if the temperature of the associated zone is between @@ -192,17 +217,21 @@ all PWM outputs are set to 100% duty-cycle. Following is another representation of how the chip sets the output duty-cycle based on the temperature of the associated thermal zone: - Duty-Cycle Duty-Cycle - Temperature Rising Temp Falling Temp - ----------- ----------- ------------ + =============== =============== ================= + Temperature Duty-Cycle Duty-Cycle + Rising Temp Falling Temp + =============== =============== ================= full-speed full-speed full-speed - < linearly adjusted duty-cycle > + - < linearly - + adjusted + duty-cycle > low-speed low-speed low-speed - min-speed low-speed + - min-speed low-speed min-speed min-speed min-speed - min-speed min-speed + - min-speed min-speed + =============== =============== ================= Sysfs Attributes @@ -211,8 +240,9 @@ Sysfs Attributes Following is a list of all sysfs attributes that the driver provides, their permissions and a short description: +=============================== ======= ======================================= Name Perm Description ----- ---- ----------- +=============================== ======= ======================================= cpu0_vid RO CPU core reference voltage in millivolts. vrm RW Voltage regulator module version @@ -242,9 +272,10 @@ temp[1-3]_fault RO Temp input fault. Returns 1 if the chip zone[1-3]_auto_channels_temp RO Temperature zone to temperature input mapping. This attribute is a bitfield and supports the following values: - 1: temp1 - 2: temp2 - 4: temp3 + + - 1: temp1 + - 2: temp2 + - 4: temp3 zone[1-3]_auto_point1_temp_hyst RW Auto PWM temp point1 hysteresis. The output of the corresponding PWM is set to the pwm_auto_min value if the temp @@ -275,9 +306,10 @@ pmw[1-3,5-6] RO/RW Duty-cycle of PWM output. Supported manual mode. pwm[1-3]_enable RW Enable of PWM outputs 1-3. Supported values are: - 0: turned off (output @ 100%) - 1: manual mode - 2: automatic mode + + - 0: turned off (output @ 100%) + - 1: manual mode + - 2: automatic mode pwm[5-6]_enable RO Enable of PWM outputs 5-6. Always returns 1 since these 2 outputs are hard-wired to manual mode. @@ -294,11 +326,12 @@ pmw[1-3]_ramp_rate RW Ramp rate of PWM output. Determines how pwm[1-3]_auto_channels_zone RW PWM output to temperature zone mapping. This attribute is a bitfield and supports the following values: - 1: zone1 - 2: zone2 - 4: zone3 - 6: highest of zone[2-3] - 7: highest of zone[1-3] + + - 1: zone1 + - 2: zone2 + - 4: zone3 + - 6: highest of zone[2-3] + - 7: highest of zone[1-3] pwm[1-3]_auto_pwm_min RW Auto PWM min pwm. Minimum PWM duty- cycle. Supported values are 0 or auto_point1_pwm. @@ -307,12 +340,14 @@ pwm[1-3]_auto_point1_pwm RW Auto PWM pwm point. Auto_point1 is the pwm[1-3]_auto_point2_pwm RO Auto PWM pwm point. Auto_point2 is the full-speed duty-cycle which is hard- wired to 255 (100% duty-cycle). +=============================== ======= ======================================= Chip Differences ---------------- +======================= ======= ======= ======= ======= Feature dme1737 sch311x sch5027 sch5127 -------------------------------------------------------- +======================= ======= ======= ======= ======= temp[1-3]_offset yes yes vid yes zone3 yes yes yes @@ -326,3 +361,4 @@ pwm5 opt opt fan6 opt opt pwm6 opt opt in7 yes +======================= ======= ======= ======= ======= diff --git a/Documentation/hwmon/vt1211 b/Documentation/hwmon/vt1211 index 77fa633b97a8..ddbcde7dd642 100644 --- a/Documentation/hwmon/vt1211 +++ b/Documentation/hwmon/vt1211 @@ -2,9 +2,13 @@ Kernel driver vt1211 ==================== Supported chips: + * VIA VT1211 + Prefix: 'vt1211' + Addresses scanned: none, address read from Super-I/O config space + Datasheet: Provided by VIA upon request and under NDA Authors: Juerg Haefliger @@ -19,14 +23,17 @@ technical support. Module Parameters ----------------- -* uch_config: int Override the BIOS default universal channel (UCH) + +* uch_config: int + Override the BIOS default universal channel (UCH) configuration for channels 1-5. Legal values are in the range of 0-31. Bit 0 maps to UCH1, bit 1 maps to UCH2 and so on. Setting a bit to 1 enables the thermal input of that particular UCH and setting a bit to 0 enables the voltage input. -* int_mode: int Override the BIOS default temperature interrupt mode. +* int_mode: int + Override the BIOS default temperature interrupt mode. The only possible value is 0 which forces interrupt mode 0. In this mode, any pending interrupt is cleared when the status register is read but is regenerated as @@ -55,8 +62,9 @@ connected to the PWM outputs of the VT1211 :-(). The following table shows the relationship between the vt1211 inputs and the sysfs nodes. +=============== ============== =========== ================================ Sensor Voltage Mode Temp Mode Default Use (from the datasheet) ------- ------------ --------- -------------------------------- +=============== ============== =========== ================================ Reading 1 temp1 Intel thermal diode Reading 3 temp2 Internal thermal diode UCH1/Reading2 in0 temp3 NTC type thermistor @@ -65,6 +73,7 @@ UCH3 in2 temp5 VccP (processor core) UCH4 in3 temp6 +5V UCH5 in4 temp7 +12V +3.3V in5 Internal VCC (+3.3V) +=============== ============== =========== ================================ Voltage Monitoring @@ -82,19 +91,22 @@ follows. And this is of course totally dependent on the actual board implementation :-) You will have to find documentation for your own motherboard and edit sensors.conf accordingly. - Expected +============= ====== ====== ========= ============ + Expected Voltage R1 R2 Divider Raw Value ------------------------------------------------ +============= ====== ====== ========= ============ +2.5V 2K 10K 1.2 2083 mV -VccP --- --- 1.0 1400 mV (1) +VccP --- --- 1.0 1400 mV [1]_ +5V 14K 10K 2.4 2083 mV +12V 47K 10K 5.7 2105 mV -+3.3V (int) 2K 3.4K 1.588 3300 mV (2) ++3.3V (int) 2K 3.4K 1.588 3300 mV [2]_ +3.3V (ext) 6.8K 10K 1.68 1964 mV +============= ====== ====== ========= ============ -(1) Depending on the CPU (1.4V is for a VIA C3 Nehemiah). -(2) R1 and R2 for 3.3V (int) are internal to the VT1211 chip and the driver - performs the scaling and returns the properly scaled voltage value. +.. [1] Depending on the CPU (1.4V is for a VIA C3 Nehemiah). + +.. [2] R1 and R2 for 3.3V (int) are internal to the VT1211 chip and the driver + performs the scaling and returns the properly scaled voltage value. Each measured voltage has an associated low and high limit which triggers an alarm when crossed. @@ -124,35 +136,37 @@ compute temp1 (@-Offset)/Gain, (@*Gain)+Offset According to the VIA VT1211 BIOS porting guide, the following gain and offset values should be used: +=============== ======== =========== Diode Type Offset Gain ----------- ------ ---- +=============== ======== =========== Intel CPU 88.638 0.9528 - 65.000 0.9686 *) + 65.000 0.9686 [3]_ VIA C3 Ezra 83.869 0.9528 VIA C3 Ezra-T 73.869 0.9528 +=============== ======== =========== -*) This is the formula from the lm_sensors 2.10.0 sensors.conf file. I don't -know where it comes from or how it was derived, it's just listed here for -completeness. +.. [3] This is the formula from the lm_sensors 2.10.0 sensors.conf file. I don't + know where it comes from or how it was derived, it's just listed here for + completeness. Temp3-temp7 support NTC thermistors. For these channels, the driver returns the voltages as seen at the individual pins of UCH1-UCH5. The voltage at the pin (Vpin) is formed by a voltage divider made of the thermistor (Rth) and a -scaling resistor (Rs): +scaling resistor (Rs):: -Vpin = 2200 * Rth / (Rs + Rth) (2200 is the ADC max limit of 2200 mV) + Vpin = 2200 * Rth / (Rs + Rth) (2200 is the ADC max limit of 2200 mV) The equation for the thermistor is as follows (google it if you want to know -more about it): +more about it):: -Rth = Ro * exp(B * (1 / T - 1 / To)) (To is 298.15K (25C) and Ro is the - nominal resistance at 25C) + Rth = Ro * exp(B * (1 / T - 1 / To)) (To is 298.15K (25C) and Ro is the + nominal resistance at 25C) Mingling the above two equations and assuming Rs = Ro and B = 3435 yields the -following formula for sensors.conf: +following formula for sensors.conf:: -compute tempx 1 / (1 / 298.15 - (` (2200 / @ - 1)) / 3435) - 273.15, - 2200 / (1 + (^ (3435 / 298.15 - 3435 / (273.15 + @)))) + compute tempx 1 / (1 / 298.15 - (` (2200 / @ - 1)) / 3435) - 273.15, + 2200 / (1 + (^ (3435 / 298.15 - 3435 / (273.15 + @)))) Fan Speed Control @@ -176,31 +190,37 @@ registers in the VT1211 and programming one set is sufficient (actually only the first set pwm1_auto_point[1-4]_temp is writable, the second set is read-only). +========================== ========================================= PWM Auto Point PWM Output Duty-Cycle ------------------------------------------------- +========================== ========================================= pwm[1-2]_auto_point4_pwm full speed duty-cycle (hard-wired to 255) pwm[1-2]_auto_point3_pwm high speed duty-cycle pwm[1-2]_auto_point2_pwm low speed duty-cycle pwm[1-2]_auto_point1_pwm off duty-cycle (hard-wired to 0) +========================== ========================================= +========================== ================= Temp Auto Point Thermal Threshold ---------------------------------------------- +========================== ================= pwm[1-2]_auto_point4_temp full speed temp pwm[1-2]_auto_point3_temp high speed temp pwm[1-2]_auto_point2_temp low speed temp pwm[1-2]_auto_point1_temp off temp +========================== ================= Long story short, the controller implements the following algorithm to set the PWM output duty-cycle based on the input temperature: -Thermal Threshold Output Duty-Cycle - (Rising Temp) (Falling Temp) ----------------------------------------------------------- - full speed duty-cycle full speed duty-cycle +=================== ======================= ======================== +Thermal Threshold Output Duty-Cycle Output Duty-Cycle + (Rising Temp) (Falling Temp) +=================== ======================= ======================== +- full speed duty-cycle full speed duty-cycle full speed temp - high speed duty-cycle full speed duty-cycle +- high speed duty-cycle full speed duty-cycle high speed temp - low speed duty-cycle high speed duty-cycle +- low speed duty-cycle high speed duty-cycle low speed temp - off duty-cycle low speed duty-cycle +- off duty-cycle low speed duty-cycle off temp +=================== ======================= ======================== From 4f1158b355a888bc612b8f37d2f9aad7032e55a3 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 17 Apr 2019 06:46:23 -0300 Subject: [PATCH 110/125] docs: hwmon: wm831x, wm8350: convert to ReST format Convert wm831x and wm8350 to ReST format, in order to allow them to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Guenter Roeck --- Documentation/hwmon/wm831x | 9 ++++++--- Documentation/hwmon/wm8350 | 10 +++++++--- 2 files changed, 13 insertions(+), 6 deletions(-) diff --git a/Documentation/hwmon/wm831x b/Documentation/hwmon/wm831x index 11446757c8c8..c56fb35a2fb3 100644 --- a/Documentation/hwmon/wm831x +++ b/Documentation/hwmon/wm831x @@ -3,11 +3,14 @@ Kernel driver wm831x-hwmon Supported chips: * Wolfson Microelectronics WM831x PMICs + Prefix: 'wm831x' + Datasheet: - http://www.wolfsonmicro.com/products/WM8310 - http://www.wolfsonmicro.com/products/WM8311 - http://www.wolfsonmicro.com/products/WM8312 + + - http://www.wolfsonmicro.com/products/WM8310 + - http://www.wolfsonmicro.com/products/WM8311 + - http://www.wolfsonmicro.com/products/WM8312 Authors: Mark Brown diff --git a/Documentation/hwmon/wm8350 b/Documentation/hwmon/wm8350 index 98f923bd2e92..cec044ca5900 100644 --- a/Documentation/hwmon/wm8350 +++ b/Documentation/hwmon/wm8350 @@ -2,12 +2,16 @@ Kernel driver wm8350-hwmon ========================== Supported chips: + * Wolfson Microelectronics WM835x PMICs + Prefix: 'wm8350' + Datasheet: - http://www.wolfsonmicro.com/products/WM8350 - http://www.wolfsonmicro.com/products/WM8351 - http://www.wolfsonmicro.com/products/WM8352 + + - http://www.wolfsonmicro.com/products/WM8350 + - http://www.wolfsonmicro.com/products/WM8351 + - http://www.wolfsonmicro.com/products/WM8352 Authors: Mark Brown From 08fae079ea750eec86a5ca7844c0a0a914e70fc2 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 17 Apr 2019 06:46:24 -0300 Subject: [PATCH 111/125] docs: hwmon: da9052, da9055: convert to ReST format Convert da9052 and da9055 to ReST format, in order to allow them to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Guenter Roeck --- Documentation/hwmon/da9052 | 41 +++++++++++++++++++++++++++----------- Documentation/hwmon/da9055 | 20 ++++++++++++++----- 2 files changed, 44 insertions(+), 17 deletions(-) diff --git a/Documentation/hwmon/da9052 b/Documentation/hwmon/da9052 index 5bc51346b689..c1c0f1f08904 100644 --- a/Documentation/hwmon/da9052 +++ b/Documentation/hwmon/da9052 @@ -1,6 +1,12 @@ +Kernel driver da9052 +==================== + Supported chips: + * Dialog Semiconductors DA9052-BC and DA9053-AA/Bx PMICs + Prefix: 'da9052' + Datasheet: Datasheet is not publicly available. Authors: David Dajun Chen @@ -15,17 +21,20 @@ different inputs. The track and hold circuit ensures stable input voltages at the input of the ADC during the conversion. The ADC is used to measure the following inputs: -Channel 0: VDDOUT - measurement of the system voltage -Channel 1: ICH - internal battery charger current measurement -Channel 2: TBAT - output from the battery NTC -Channel 3: VBAT - measurement of the battery voltage -Channel 4: ADC_IN4 - high impedance input (0 - 2.5V) -Channel 5: ADC_IN5 - high impedance input (0 - 2.5V) -Channel 6: ADC_IN6 - high impedance input (0 - 2.5V) -Channel 7: XY - TSI interface to measure the X and Y voltage of the touch - screen resistive potentiometers -Channel 8: Internal Tjunc. - sense (internal temp. sensor) -Channel 9: VBBAT - measurement of the backup battery voltage + +========= =================================================================== +Channel 0 VDDOUT - measurement of the system voltage +Channel 1 ICH - internal battery charger current measurement +Channel 2 TBAT - output from the battery NTC +Channel 3 VBAT - measurement of the battery voltage +Channel 4 ADC_IN4 - high impedance input (0 - 2.5V) +Channel 5 ADC_IN5 - high impedance input (0 - 2.5V) +Channel 6 ADC_IN6 - high impedance input (0 - 2.5V) +Channel 7 XY - TSI interface to measure the X and Y voltage of the touch + screen resistive potentiometers +Channel 8 Internal Tjunc. - sense (internal temp. sensor) +Channel 9 VBBAT - measurement of the backup battery voltage +========= =================================================================== By using sysfs attributes we can measure the system voltage VDDOUT, the battery charging current ICH, battery temperature TBAT, battery junction temperature @@ -37,12 +46,15 @@ Voltage Monitoring Voltages are sampled by a 10 bit ADC. The battery voltage is calculated as: + Milli volt = ((ADC value * 1000) / 512) + 2500 The backup battery voltage is calculated as: + Milli volt = (ADC value * 2500) / 512; The voltages on ADC channels 4, 5 and 6 are calculated as: + Milli volt = (ADC value * 2500) / 1023 Temperature Monitoring @@ -52,10 +64,15 @@ Temperatures are sampled by a 10 bit ADC. Junction and battery temperatures are monitored by the ADC channels. The junction temperature is calculated: + Degrees celsius = 1.708 * (TJUNC_RES - T_OFFSET) - 108.8 + The junction temperature attribute is supported by the driver. The battery temperature is calculated: - Degree Celsius = 1 / (t1 + 1/298)- 273 + + Degree Celsius = 1 / (t1 + 1/298) - 273 + where t1 = (1/B)* ln(( ADCval * 2.5)/(R25*ITBAT*255)) + Default values of R25, B, ITBAT are 10e3, 3380 and 50e-6 respectively. diff --git a/Documentation/hwmon/da9055 b/Documentation/hwmon/da9055 index 855c3f536e00..beae271a3312 100644 --- a/Documentation/hwmon/da9055 +++ b/Documentation/hwmon/da9055 @@ -1,6 +1,11 @@ +Kernel driver da9055 +==================== + Supported chips: * Dialog Semiconductors DA9055 PMIC + Prefix: 'da9055' + Datasheet: Datasheet is not publicly available. Authors: David Dajun Chen @@ -15,11 +20,12 @@ different inputs. The track and hold circuit ensures stable input voltages at the input of the ADC during the conversion. The ADC is used to measure the following inputs: -Channel 0: VDDOUT - measurement of the system voltage -Channel 1: ADC_IN1 - high impedance input (0 - 2.5V) -Channel 2: ADC_IN2 - high impedance input (0 - 2.5V) -Channel 3: ADC_IN3 - high impedance input (0 - 2.5V) -Channel 4: Internal Tjunc. - sense (internal temp. sensor) + +- Channel 0: VDDOUT - measurement of the system voltage +- Channel 1: ADC_IN1 - high impedance input (0 - 2.5V) +- Channel 2: ADC_IN2 - high impedance input (0 - 2.5V) +- Channel 3: ADC_IN3 - high impedance input (0 - 2.5V) +- Channel 4: Internal Tjunc. - sense (internal temp. sensor) By using sysfs attributes we can measure the system voltage VDDOUT, chip junction temperature and auxiliary channels voltages. @@ -31,9 +37,11 @@ Voltages are sampled in a AUTO mode it can be manually sampled too and results are stored in a 10 bit ADC. The system voltage is calculated as: + Milli volt = ((ADC value * 1000) / 85) + 2500 The voltages on ADC channels 1, 2 and 3 are calculated as: + Milli volt = (ADC value * 1000) / 102 Temperature Monitoring @@ -43,5 +51,7 @@ Temperatures are sampled by a 10 bit ADC. Junction temperatures are monitored by the ADC channels. The junction temperature is calculated: + Degrees celsius = -0.4084 * (ADC_RES - T_OFFSET) + 307.6332 + The junction temperature attribute is supported by the driver. From 0d9256262f92d26ebd29ee469bd07761a9835739 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 17 Apr 2019 06:46:25 -0300 Subject: [PATCH 112/125] docs: hwmon: k8temp, w83793: convert to ReST format Convert k8temp and w83793 to ReST format, in order to allow them to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Guenter Roeck --- Documentation/hwmon/k8temp | 17 +++-- Documentation/hwmon/w83793 | 123 ++++++++++++++++++++----------------- 2 files changed, 77 insertions(+), 63 deletions(-) diff --git a/Documentation/hwmon/k8temp b/Documentation/hwmon/k8temp index 716dc24c7237..72da12aa17e5 100644 --- a/Documentation/hwmon/k8temp +++ b/Documentation/hwmon/k8temp @@ -2,12 +2,17 @@ Kernel driver k8temp ==================== Supported chips: + * AMD Athlon64/FX or Opteron CPUs + Prefix: 'k8temp' + Addresses scanned: PCI space + Datasheet: http://support.amd.com/us/Processor_TechDocs/32559.pdf Author: Rudolf Marek + Contact: Rudolf Marek Description @@ -27,10 +32,12 @@ implemented sensors. Mapping of /sys files is as follows: -temp1_input - temperature of Core 0 and "place" 0 -temp2_input - temperature of Core 0 and "place" 1 -temp3_input - temperature of Core 1 and "place" 0 -temp4_input - temperature of Core 1 and "place" 1 +============= =================================== +temp1_input temperature of Core 0 and "place" 0 +temp2_input temperature of Core 0 and "place" 1 +temp3_input temperature of Core 1 and "place" 0 +temp4_input temperature of Core 1 and "place" 1 +============= =================================== Temperatures are measured in degrees Celsius and measurement resolution is 1 degree C. It is expected that future CPU will have better resolution. The @@ -48,7 +55,7 @@ computed temperature called TControl, which must be lower than TControlMax. The relationship is following: -temp1_input - TjOffset*2 < TControlMax, + temp1_input - TjOffset*2 < TControlMax, TjOffset is not yet exported by the driver, TControlMax is usually 70 degrees C. The rule of the thumb -> CPU temperature should not cross diff --git a/Documentation/hwmon/w83793 b/Documentation/hwmon/w83793 index 6cc5f639b721..83bb40c48645 100644 --- a/Documentation/hwmon/w83793 +++ b/Documentation/hwmon/w83793 @@ -2,29 +2,34 @@ Kernel driver w83793 ==================== Supported chips: + * Winbond W83793G/W83793R + Prefix: 'w83793' + Addresses scanned: I2C 0x2c - 0x2f + Datasheet: Still not published Authors: - Yuan Mu (Winbond Electronics) - Rudolf Marek + - Yuan Mu (Winbond Electronics) + - Rudolf Marek Module parameters ----------------- * reset int - (default 0) - This parameter is not recommended, it will lose motherboard specific - settings. Use 'reset=1' to reset the chip when loading this module. + (default 0) + + This parameter is not recommended, it will lose motherboard specific + settings. Use 'reset=1' to reset the chip when loading this module. * force_subclients=bus,caddr,saddr1,saddr2 - This is used to force the i2c addresses for subclients of - a certain chip. Typical usage is `force_subclients=0,0x2f,0x4a,0x4b' - to force the subclients of chip 0x2f on bus 0 to i2c addresses - 0x4a and 0x4b. + This is used to force the i2c addresses for subclients of + a certain chip. Typical usage is `force_subclients=0,0x2f,0x4a,0x4b` + to force the subclients of chip 0x2f on bus 0 to i2c addresses + 0x4a and 0x4b. Description @@ -33,70 +38,72 @@ Description This driver implements support for Winbond W83793G/W83793R chips. * Exported features - This driver exports 10 voltage sensors, up to 12 fan tachometer inputs, - 6 remote temperatures, up to 8 sets of PWM fan controls, SmartFan - (automatic fan speed control) on all temperature/PWM combinations, 2 - sets of 6-pin CPU VID input. + This driver exports 10 voltage sensors, up to 12 fan tachometer inputs, + 6 remote temperatures, up to 8 sets of PWM fan controls, SmartFan + (automatic fan speed control) on all temperature/PWM combinations, 2 + sets of 6-pin CPU VID input. * Sensor resolutions - If your motherboard maker used the reference design, the resolution of - voltage0-2 is 2mV, resolution of voltage3/4/5 is 16mV, 8mV for voltage6, - 24mV for voltage7/8. Temp1-4 have a 0.25 degree Celsius resolution, - temp5-6 have a 1 degree Celsiis resolution. + If your motherboard maker used the reference design, the resolution of + voltage0-2 is 2mV, resolution of voltage3/4/5 is 16mV, 8mV for voltage6, + 24mV for voltage7/8. Temp1-4 have a 0.25 degree Celsius resolution, + temp5-6 have a 1 degree Celsiis resolution. * Temperature sensor types - Temp1-4 have 2 possible types. It can be read from (and written to) - temp[1-4]_type. - - If the value is 3, it starts monitoring using a remote termal diode - (default). - - If the value is 6, it starts monitoring using the temperature sensor - in Intel CPU and get result by PECI. - Temp5-6 can be connected to external thermistors (value of - temp[5-6]_type is 4). + Temp1-4 have 2 possible types. It can be read from (and written to) + temp[1-4]_type. + + - If the value is 3, it starts monitoring using a remote termal diode + (default). + - If the value is 6, it starts monitoring using the temperature sensor + in Intel CPU and get result by PECI. + + Temp5-6 can be connected to external thermistors (value of + temp[5-6]_type is 4). * Alarm mechanism - For voltage sensors, an alarm triggers if the measured value is below - the low voltage limit or over the high voltage limit. - For temperature sensors, an alarm triggers if the measured value goes - above the high temperature limit, and wears off only after the measured - value drops below the hysteresis value. - For fan sensors, an alarm triggers if the measured value is below the - low speed limit. + For voltage sensors, an alarm triggers if the measured value is below + the low voltage limit or over the high voltage limit. + For temperature sensors, an alarm triggers if the measured value goes + above the high temperature limit, and wears off only after the measured + value drops below the hysteresis value. + For fan sensors, an alarm triggers if the measured value is below the + low speed limit. * SmartFan/PWM control - If you want to set a pwm fan to manual mode, you just need to make sure it - is not controlled by any temp channel, for example, you want to set fan1 - to manual mode, you need to check the value of temp[1-6]_fan_map, make - sure bit 0 is cleared in the 6 values. And then set the pwm1 value to - control the fan. + If you want to set a pwm fan to manual mode, you just need to make sure it + is not controlled by any temp channel, for example, you want to set fan1 + to manual mode, you need to check the value of temp[1-6]_fan_map, make + sure bit 0 is cleared in the 6 values. And then set the pwm1 value to + control the fan. - Each temperature channel can control all the 8 PWM outputs (by setting the - corresponding bit in tempX_fan_map), you can set the temperature channel - mode using temp[1-6]_pwm_enable, 2 is Thermal Cruise mode and 3 - is the SmartFanII mode. Temperature channels will try to speed up or - slow down all controlled fans, this means one fan can receive different - PWM value requests from different temperature channels, but the chip - will always pick the safest (max) PWM value for each fan. + Each temperature channel can control all the 8 PWM outputs (by setting the + corresponding bit in tempX_fan_map), you can set the temperature channel + mode using temp[1-6]_pwm_enable, 2 is Thermal Cruise mode and 3 + is the SmartFanII mode. Temperature channels will try to speed up or + slow down all controlled fans, this means one fan can receive different + PWM value requests from different temperature channels, but the chip + will always pick the safest (max) PWM value for each fan. - In Thermal Cruise mode, the chip attempts to keep the temperature at a - predefined value, within a tolerance margin. So if tempX_input > - thermal_cruiseX + toleranceX, the chip will increase the PWM value, - if tempX_input < thermal_cruiseX - toleranceX, the chip will decrease - the PWM value. If the temperature is within the tolerance range, the PWM - value is left unchanged. + In Thermal Cruise mode, the chip attempts to keep the temperature at a + predefined value, within a tolerance margin. So if tempX_input > + thermal_cruiseX + toleranceX, the chip will increase the PWM value, + if tempX_input < thermal_cruiseX - toleranceX, the chip will decrease + the PWM value. If the temperature is within the tolerance range, the PWM + value is left unchanged. - SmartFanII works differently, you have to define up to 7 PWM, temperature - trip points, defining a PWM/temperature curve which the chip will follow. - While not fundamentally different from the Thermal Cruise mode, the - implementation is quite different, giving you a finer-grained control. + SmartFanII works differently, you have to define up to 7 PWM, temperature + trip points, defining a PWM/temperature curve which the chip will follow. + While not fundamentally different from the Thermal Cruise mode, the + implementation is quite different, giving you a finer-grained control. * Chassis - If the case open alarm triggers, it will stay in this state unless cleared - by writing 0 to the sysfs file "intrusion0_alarm". + If the case open alarm triggers, it will stay in this state unless cleared + by writing 0 to the sysfs file "intrusion0_alarm". * VID and VRM - The VRM version is detected automatically, don't modify the it unless you - *do* know the cpu VRM version and it's not properly detected. + The VRM version is detected automatically, don't modify the it unless you + *do* know the cpu VRM version and it's not properly detected. Notes From 1f234ff1621787860cfcca6aa8fb626519405a72 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 17 Apr 2019 06:46:26 -0300 Subject: [PATCH 113/125] docs: hwmon: pmbus files: convert to ReST format Convert pmbus files to ReST format, in order to allow them to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Guenter Roeck --- Documentation/hwmon/adm1275 | 26 ++++ Documentation/hwmon/ibm-cffps | 3 + Documentation/hwmon/ir35221 | 11 +- Documentation/hwmon/lm25066 | 30 ++++ Documentation/hwmon/ltc2978 | 273 +++++++++++++++++++++++++-------- Documentation/hwmon/ltc3815 | 12 +- Documentation/hwmon/max16064 | 15 +- Documentation/hwmon/max20751 | 7 + Documentation/hwmon/max31785 | 6 + Documentation/hwmon/max34440 | 88 +++++++++-- Documentation/hwmon/max8688 | 18 ++- Documentation/hwmon/pmbus | 90 +++++++---- Documentation/hwmon/pmbus-core | 173 ++++++++++++--------- Documentation/hwmon/tps40422 | 23 ++- Documentation/hwmon/ucd9000 | 31 ++-- Documentation/hwmon/ucd9200 | 42 +++-- Documentation/hwmon/zl6100 | 167 +++++++++++++------- 17 files changed, 736 insertions(+), 279 deletions(-) diff --git a/Documentation/hwmon/adm1275 b/Documentation/hwmon/adm1275 index 5e277b0d91ce..5c5860011d6e 100644 --- a/Documentation/hwmon/adm1275 +++ b/Documentation/hwmon/adm1275 @@ -2,29 +2,53 @@ Kernel driver adm1275 ===================== Supported chips: + * Analog Devices ADM1075 + Prefix: 'adm1075' + Addresses scanned: - + Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1075.pdf + * Analog Devices ADM1272 + Prefix: 'adm1272' + Addresses scanned: - + Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1272.pdf + * Analog Devices ADM1275 + Prefix: 'adm1275' + Addresses scanned: - + Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1275.pdf + * Analog Devices ADM1276 + Prefix: 'adm1276' + Addresses scanned: - + Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1276.pdf + * Analog Devices ADM1278 + Prefix: 'adm1278' + Addresses scanned: - + Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1278.pdf + * Analog Devices ADM1293/ADM1294 + Prefix: 'adm1293', 'adm1294' + Addresses scanned: - + Datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/ADM1293_1294.pdf Author: Guenter Roeck @@ -75,6 +99,7 @@ Sysfs entries The following attributes are supported. Limits are read-write, history reset attributes are write-only, all other attributes are read-only. +======================= ======================================================= inX_label "vin1" or "vout1" depending on chip variant and configuration. On ADM1075, ADM1293, and ADM1294, vout1 reports the voltage on the VAUX pin. @@ -120,3 +145,4 @@ temp1_reset_history Write any value to reset history. Temperature attributes are supported on ADM1272 and ADM1278. +======================= ======================================================= diff --git a/Documentation/hwmon/ibm-cffps b/Documentation/hwmon/ibm-cffps index e05ecd8ecfcf..52e74e39463a 100644 --- a/Documentation/hwmon/ibm-cffps +++ b/Documentation/hwmon/ibm-cffps @@ -2,6 +2,7 @@ Kernel driver ibm-cffps ======================= Supported chips: + * IBM Common Form Factor power supply Author: Eddie James @@ -24,6 +25,7 @@ Sysfs entries The following attributes are supported: +======================= ====================================================== curr1_alarm Output current over-current alarm. curr1_input Measured output current in mA. curr1_label "iout1" @@ -52,3 +54,4 @@ temp2_alarm Secondary rectifier temp over-temperature alarm. temp2_input Measured secondary rectifier temp in millidegrees C. temp3_alarm ORing FET temperature over-temperature alarm. temp3_input Measured ORing FET temperature in millidegrees C. +======================= ====================================================== diff --git a/Documentation/hwmon/ir35221 b/Documentation/hwmon/ir35221 index 3e82f3d93f44..a83922e5ccb5 100644 --- a/Documentation/hwmon/ir35221 +++ b/Documentation/hwmon/ir35221 @@ -3,8 +3,11 @@ Kernel driver ir35221 Supported chips: * Infineon IR35221 + Prefix: 'ir35221' + Addresses scanned: - + Datasheet: Datasheet is not publicly available. Author: Samuel Mendoza-Jonas @@ -23,15 +26,16 @@ This driver does not probe for PMBus devices. You will have to instantiate devices explicitly. Example: the following commands will load the driver for an IR35221 -at address 0x70 on I2C bus #4: +at address 0x70 on I2C bus #4:: -# modprobe ir35221 -# echo ir35221 0x70 > /sys/bus/i2c/devices/i2c-4/new_device + # modprobe ir35221 + # echo ir35221 0x70 > /sys/bus/i2c/devices/i2c-4/new_device Sysfs attributes ---------------- +======================= ======================================================= curr1_label "iin" curr1_input Measured input current curr1_max Maximum current @@ -85,3 +89,4 @@ temp[1-2]_highest Highest temperature temp[1-2]_lowest Lowest temperature temp[1-2]_max Maximum temperature temp[1-2]_max_alarm Chip temperature high alarm +======================= ======================================================= diff --git a/Documentation/hwmon/lm25066 b/Documentation/hwmon/lm25066 index 51b32aa203a8..60b7f2722931 100644 --- a/Documentation/hwmon/lm25066 +++ b/Documentation/hwmon/lm25066 @@ -2,34 +2,62 @@ Kernel driver lm25066 ===================== Supported chips: + * TI LM25056 + Prefix: 'lm25056' + Addresses scanned: - + Datasheets: + http://www.ti.com/lit/gpn/lm25056 + http://www.ti.com/lit/gpn/lm25056a + * National Semiconductor LM25066 + Prefix: 'lm25066' + Addresses scanned: - + Datasheets: + http://www.national.com/pf/LM/LM25066.html + http://www.national.com/pf/LM/LM25066A.html + * National Semiconductor LM5064 + Prefix: 'lm5064' + Addresses scanned: - + Datasheet: + http://www.national.com/pf/LM/LM5064.html + * National Semiconductor LM5066 + Prefix: 'lm5066' + Addresses scanned: - + Datasheet: + http://www.national.com/pf/LM/LM5066.html + * Texas Instruments LM5066I + Prefix: 'lm5066i' + Addresses scanned: - + Datasheet: + http://www.ti.com/product/LM5066I + Author: Guenter Roeck @@ -64,6 +92,7 @@ Sysfs entries The following attributes are supported. Limits are read-write; all other attributes are read-only. +======================= ======================================================= in1_label "vin" in1_input Measured input voltage. in1_average Average measured input voltage. @@ -105,3 +134,4 @@ temp1_max Maximum temperature. temp1_crit Critical high temperature. temp1_max_alarm Chip temperature high alarm. temp1_crit_alarm Chip temperature critical high alarm. +======================= ======================================================= diff --git a/Documentation/hwmon/ltc2978 b/Documentation/hwmon/ltc2978 index dfb2caa401d9..01a24fd6d5fe 100644 --- a/Documentation/hwmon/ltc2978 +++ b/Documentation/hwmon/ltc2978 @@ -2,85 +2,143 @@ Kernel driver ltc2978 ===================== Supported chips: + * Linear Technology LTC2974 + Prefix: 'ltc2974' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltc2974 + * Linear Technology LTC2975 + Prefix: 'ltc2975' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltc2975 + * Linear Technology LTC2977 + Prefix: 'ltc2977' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltc2977 + * Linear Technology LTC2978, LTC2978A + Prefix: 'ltc2978' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltc2978 - http://www.linear.com/product/ltc2978a + + http://www.linear.com/product/ltc2978a + * Linear Technology LTC2980 + Prefix: 'ltc2980' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltc2980 + * Linear Technology LTC3880 + Prefix: 'ltc3880' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltc3880 + * Linear Technology LTC3882 + Prefix: 'ltc3882' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltc3882 + * Linear Technology LTC3883 + Prefix: 'ltc3883' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltc3883 + * Linear Technology LTC3886 + Prefix: 'ltc3886' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltc3886 + * Linear Technology LTC3887 + Prefix: 'ltc3887' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltc3887 + * Linear Technology LTM2987 + Prefix: 'ltm2987' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltm2987 + * Linear Technology LTM4675 + Prefix: 'ltm4675' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltm4675 + * Linear Technology LTM4676 + Prefix: 'ltm4676' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltm4676 + * Analog Devices LTM4686 + Prefix: 'ltm4686' + Addresses scanned: - + Datasheet: http://www.analog.com/ltm4686 + Author: Guenter Roeck Description ----------- -LTC2974 and LTC2975 are quad digital power supply managers. -LTC2978 is an octal power supply monitor. -LTC2977 is a pin compatible replacement for LTC2978. -LTC2980 is a 16-channel Power System Manager, consisting of two LTC2977 -in a single die. The chip is instantiated and reported as two separate chips -on two different I2C bus addresses. -LTC3880, LTC3882, LTC3886, and LTC3887 are dual output poly-phase step-down -DC/DC controllers. -LTC3883 is a single phase step-down DC/DC controller. -LTM2987 is a 16-channel Power System Manager with two LTC2977 plus -additional components on a single die. The chip is instantiated and reported -as two separate chips on two different I2C bus addresses. -LTM4675 is a dual 9A or single 18A μModule regulator -LTM4676 is a dual 13A or single 26A uModule regulator. -LTM4686 is a dual 10A or single 20A uModule regulator. +- LTC2974 and LTC2975 are quad digital power supply managers. +- LTC2978 is an octal power supply monitor. +- LTC2977 is a pin compatible replacement for LTC2978. +- LTC2980 is a 16-channel Power System Manager, consisting of two LTC2977 +- in a single die. The chip is instantiated and reported as two separate chips +- on two different I2C bus addresses. +- LTC3880, LTC3882, LTC3886, and LTC3887 are dual output poly-phase step-down +- DC/DC controllers. +- LTC3883 is a single phase step-down DC/DC controller. +- LTM2987 is a 16-channel Power System Manager with two LTC2977 plus +- additional components on a single die. The chip is instantiated and reported +- as two separate chips on two different I2C bus addresses. +- LTM4675 is a dual 9A or single 18A μModule regulator +- LTM4676 is a dual 13A or single 26A uModule regulator. +- LTM4686 is a dual 10A or single 20A uModule regulator. Usage Notes @@ -90,127 +148,208 @@ This driver does not probe for PMBus devices. You will have to instantiate devices explicitly. Example: the following commands will load the driver for an LTC2978 at address -0x60 on I2C bus #1: +0x60 on I2C bus #1:: -# modprobe ltc2978 -# echo ltc2978 0x60 > /sys/bus/i2c/devices/i2c-1/new_device + # modprobe ltc2978 + # echo ltc2978 0x60 > /sys/bus/i2c/devices/i2c-1/new_device Sysfs attributes ---------------- +======================= ======================================================== in1_label "vin" + in1_input Measured input voltage. + in1_min Minimum input voltage. + in1_max Maximum input voltage. + LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and LTM2987 only. + in1_lcrit Critical minimum input voltage. + LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and LTM2987 only. + in1_crit Critical maximum input voltage. + in1_min_alarm Input voltage low alarm. + in1_max_alarm Input voltage high alarm. + LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and LTM2987 only. in1_lcrit_alarm Input voltage critical low alarm. + LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and LTM2987 only. in1_crit_alarm Input voltage critical high alarm. + in1_lowest Lowest input voltage. + LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and LTM2987 only. in1_highest Highest input voltage. + in1_reset_history Reset input voltage history. in[N]_label "vout[1-8]". - LTC2974, LTC2975: N=2-5 - LTC2977, LTC2980, LTM2987: N=2-9 - LTC2978: N=2-9 - LTC3880, LTC3882, LTC23886 LTC3887, LTM4675, LTM4676: - N=2-3 - LTC3883: N=2 + + - LTC2974, LTC2975: N=2-5 + - LTC2977, LTC2980, LTM2987: N=2-9 + - LTC2978: N=2-9 + - LTC3880, LTC3882, LTC23886 LTC3887, LTM4675, LTM4676: + N=2-3 + - LTC3883: N=2 + in[N]_input Measured output voltage. + in[N]_min Minimum output voltage. + in[N]_max Maximum output voltage. + in[N]_lcrit Critical minimum output voltage. + in[N]_crit Critical maximum output voltage. + in[N]_min_alarm Output voltage low alarm. + in[N]_max_alarm Output voltage high alarm. + in[N]_lcrit_alarm Output voltage critical low alarm. + in[N]_crit_alarm Output voltage critical high alarm. -in[N]_lowest Lowest output voltage. LTC2974, LTC2975, - and LTC2978 only. + +in[N]_lowest Lowest output voltage. + + + LTC2974, LTC2975,and LTC2978 only. + in[N]_highest Highest output voltage. + in[N]_reset_history Reset output voltage history. temp[N]_input Measured temperature. - On LTC2974 and LTC2975, temp[1-4] report external - temperatures, and temp5 reports the chip temperature. - On LTC2977, LTC2980, LTC2978, and LTM2987, only one - temperature measurement is supported and reports - the chip temperature. - On LTC3880, LTC3882, LTC3887, LTM4675, and LTM4676, - temp1 and temp2 report external temperatures, and temp3 - reports the chip temperature. - On LTC3883, temp1 reports an external temperature, - and temp2 reports the chip temperature. -temp[N]_min Mimimum temperature. LTC2974, LCT2977, LTM2980, LTC2978, - and LTM2987 only. + + - On LTC2974 and LTC2975, temp[1-4] report external + temperatures, and temp5 reports the chip temperature. + - On LTC2977, LTC2980, LTC2978, and LTM2987, only one + temperature measurement is supported and reports + the chip temperature. + - On LTC3880, LTC3882, LTC3887, LTM4675, and LTM4676, + temp1 and temp2 report external temperatures, and + temp3 reports the chip temperature. + - On LTC3883, temp1 reports an external temperature, + and temp2 reports the chip temperature. + +temp[N]_min Mimimum temperature. + + LTC2974, LCT2977, LTM2980, LTC2978, and LTM2987 only. + temp[N]_max Maximum temperature. + temp[N]_lcrit Critical low temperature. + temp[N]_crit Critical high temperature. + temp[N]_min_alarm Temperature low alarm. + LTC2974, LTC2975, LTC2977, LTM2980, LTC2978, and LTM2987 only. + temp[N]_max_alarm Temperature high alarm. + + temp[N]_lcrit_alarm Temperature critical low alarm. + temp[N]_crit_alarm Temperature critical high alarm. + temp[N]_lowest Lowest measured temperature. - LTC2974, LTC2975, LTC2977, LTM2980, LTC2978, and - LTM2987 only. - Not supported for chip temperature sensor on LTC2974 and - LTC2975. -temp[N]_highest Highest measured temperature. Not supported for chip - temperature sensor on LTC2974 and LTC2975. -temp[N]_reset_history Reset temperature history. Not supported for chip - temperature sensor on LTC2974 and LTC2975. + + - LTC2974, LTC2975, LTC2977, LTM2980, LTC2978, and + LTM2987 only. + - Not supported for chip temperature sensor on LTC2974 + and LTC2975. + +temp[N]_highest Highest measured temperature. + + Not supported for chip temperature sensor on + LTC2974 and LTC2975. + +temp[N]_reset_history Reset temperature history. + + Not supported for chip temperature sensor on + LTC2974 and LTC2975. power1_label "pin". LTC3883 and LTC3886 only. + power1_input Measured input power. power[N]_label "pout[1-4]". - LTC2974, LTC2975: N=1-4 - LTC2977, LTC2980, LTM2987: Not supported - LTC2978: Not supported - LTC3880, LTC3882, LTC3886, LTC3887, LTM4675, LTM4676: - N=1-2 - LTC3883: N=2 + + - LTC2974, LTC2975: N=1-4 + - LTC2977, LTC2980, LTM2987: Not supported + - LTC2978: Not supported + - LTC3880, LTC3882, LTC3886, LTC3887, LTM4675, LTM4676: + N=1-2 + - LTC3883: N=2 + power[N]_input Measured output power. -curr1_label "iin". LTC3880, LTC3883, LTC3886, LTC3887, LTM4675, +curr1_label "iin". + + LTC3880, LTC3883, LTC3886, LTC3887, LTM4675, and LTM4676 only. + curr1_input Measured input current. + curr1_max Maximum input current. + curr1_max_alarm Input current high alarm. -curr1_highest Highest input current. LTC3883 and LTC3886 only. -curr1_reset_history Reset input current history. LTC3883 and LTC3886 only. + +curr1_highest Highest input current. + + LTC3883 and LTC3886 only. + +curr1_reset_history Reset input current history. + + LTC3883 and LTC3886 only. curr[N]_label "iout[1-4]". - LTC2974, LTC2975: N=1-4 - LTC2977, LTC2980, LTM2987: not supported - LTC2978: not supported - LTC3880, LTC3882, LTC3886, LTC3887, LTM4675, LTM4676: - N=2-3 - LTC3883: N=2 + + - LTC2974, LTC2975: N=1-4 + - LTC2977, LTC2980, LTM2987: not supported + - LTC2978: not supported + - LTC3880, LTC3882, LTC3886, LTC3887, LTM4675, LTM4676: + N=2-3 + - LTC3883: N=2 + curr[N]_input Measured output current. + curr[N]_max Maximum output current. + curr[N]_crit Critical high output current. -curr[N]_lcrit Critical low output current. LTC2974 and LTC2975 only. -curr[N]_max_alarm Output current high alarm. -curr[N]_crit_alarm Output current critical high alarm. -curr[N]_lcrit_alarm Output current critical low alarm. + +curr[N]_lcrit Critical low output current. + LTC2974 and LTC2975 only. -curr[N]_lowest Lowest output current. LTC2974 and LTC2975 only. + +curr[N]_max_alarm Output current high alarm. + +curr[N]_crit_alarm Output current critical high alarm. + +curr[N]_lcrit_alarm Output current critical low alarm. + + LTC2974 and LTC2975 only. + +curr[N]_lowest Lowest output current. + + LTC2974 and LTC2975 only. + curr[N]_highest Highest output current. + curr[N]_reset_history Reset output current history. +======================= ======================================================== diff --git a/Documentation/hwmon/ltc3815 b/Documentation/hwmon/ltc3815 index eb7db2d13587..fb0135fc1925 100644 --- a/Documentation/hwmon/ltc3815 +++ b/Documentation/hwmon/ltc3815 @@ -2,9 +2,13 @@ Kernel driver ltc3815 ===================== Supported chips: + * Linear Technology LTC3815 + Prefix: 'ltc3815' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltc3815 Author: Guenter Roeck @@ -23,15 +27,16 @@ This driver does not probe for PMBus devices. You will have to instantiate devices explicitly. Example: the following commands will load the driver for an LTC3815 -at address 0x20 on I2C bus #1: +at address 0x20 on I2C bus #1:: -# modprobe ltc3815 -# echo ltc3815 0x20 > /sys/bus/i2c/devices/i2c-1/new_device + # modprobe ltc3815 + # echo ltc3815 0x20 > /sys/bus/i2c/devices/i2c-1/new_device Sysfs attributes ---------------- +======================= ======================================================= in1_label "vin" in1_input Measured input voltage. in1_alarm Input voltage alarm. @@ -59,3 +64,4 @@ curr2_input Measured output current. curr2_alarm Output current alarm. curr2_highest Highest output current. curr2_reset_history Reset output current history. +======================= ======================================================= diff --git a/Documentation/hwmon/max16064 b/Documentation/hwmon/max16064 index 265370f5cb82..61ec679dc477 100644 --- a/Documentation/hwmon/max16064 +++ b/Documentation/hwmon/max16064 @@ -2,9 +2,13 @@ Kernel driver max16064 ====================== Supported chips: + * Maxim MAX16064 + Prefix: 'max16064' + Addresses scanned: - + Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX16064.pdf Author: Guenter Roeck @@ -40,16 +44,20 @@ Sysfs entries The following attributes are supported. Limits are read-write; all other attributes are read-only. +======================= ======================================================== in[1-4]_label "vout[1-4]" in[1-4]_input Measured voltage. From READ_VOUT register. in[1-4]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register. in[1-4]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. in[1-4]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register. -in[1-4]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register. +in[1-4]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT + register. in[1-4]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. in[1-4]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. -in[1-4]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status. -in[1-4]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status. +in[1-4]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT + status. +in[1-4]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT + status. in[1-4]_highest Historical maximum voltage. in[1-4]_reset_history Write any value to reset history. @@ -64,3 +72,4 @@ temp1_crit_alarm Chip temperature critical high alarm. Set by comparing status is set. temp1_highest Historical maximum temperature. temp1_reset_history Write any value to reset history. +======================= ======================================================== diff --git a/Documentation/hwmon/max20751 b/Documentation/hwmon/max20751 index f9fa25ebb521..d546695900ef 100644 --- a/Documentation/hwmon/max20751 +++ b/Documentation/hwmon/max20751 @@ -2,10 +2,15 @@ Kernel driver max20751 ====================== Supported chips: + * maxim MAX20751 + Prefix: 'max20751' + Addresses scanned: - + Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX20751.pdf + Application note: http://pdfserv.maximintegrated.com/en/an/AN5941.pdf Author: Guenter Roeck @@ -40,6 +45,7 @@ Sysfs entries The following attributes are supported. +======================= ======================================================= in1_label "vin1" in1_input Measured voltage. in1_min Minimum input voltage. @@ -75,3 +81,4 @@ temp1_crit_alarm Chip temperature critical high alarm. power1_input Output power. power1_label "pout1" +======================= ======================================================= diff --git a/Documentation/hwmon/max31785 b/Documentation/hwmon/max31785 index 270c5f865261..c8c6756d0ee1 100644 --- a/Documentation/hwmon/max31785 +++ b/Documentation/hwmon/max31785 @@ -2,9 +2,13 @@ Kernel driver max31785 ====================== Supported chips: + * Maxim MAX31785, MAX31785A + Prefix: 'max31785' or 'max31785a' + Addresses scanned: - + Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31785.pdf Author: Andrew Jeffery @@ -30,6 +34,7 @@ devices explicitly. Sysfs attributes ---------------- +======================= ======================================================= fan[1-4]_alarm Fan alarm. fan[1-4]_fault Fan fault. fan[1-8]_input Fan RPM. On the MAX31785A, inputs 5-8 correspond to the @@ -58,3 +63,4 @@ temp[1-11]_crit_alarm Chip temperature critical high alarm temp[1-11]_input Measured temperature temp[1-11]_max Maximum temperature temp[1-11]_max_alarm Chip temperature high alarm +======================= ======================================================= diff --git a/Documentation/hwmon/max34440 b/Documentation/hwmon/max34440 index b2de8fa49273..639838ef29fd 100644 --- a/Documentation/hwmon/max34440 +++ b/Documentation/hwmon/max34440 @@ -2,34 +2,63 @@ Kernel driver max34440 ====================== Supported chips: + * Maxim MAX34440 + Prefixes: 'max34440' + Addresses scanned: - + Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX34440.pdf + * Maxim MAX34441 + PMBus 5-Channel Power-Supply Manager and Intelligent Fan Controller + Prefixes: 'max34441' + Addresses scanned: - + Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX34441.pdf + * Maxim MAX34446 + PMBus Power-Supply Data Logger + Prefixes: 'max34446' + Addresses scanned: - + Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX34446.pdf + * Maxim MAX34451 + PMBus 16-Channel V/I Monitor and 12-Channel Sequencer/Marginer + Prefixes: 'max34451' + Addresses scanned: - + Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX34451.pdf + * Maxim MAX34460 + PMBus 12-Channel Voltage Monitor & Sequencer + Prefix: 'max34460' + Addresses scanned: - + Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX34460.pdf + * Maxim MAX34461 + PMBus 16-Channel Voltage Monitor & Sequencer + Prefix: 'max34461' + Addresses scanned: - + Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX34461.pdf Author: Guenter Roeck @@ -77,42 +106,67 @@ Sysfs entries The following attributes are supported. Limits are read-write; all other attributes are read-only. +In +~~ + +======================= ======================================================= in[1-6]_label "vout[1-6]". in[1-6]_input Measured voltage. From READ_VOUT register. in[1-6]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register. in[1-6]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. in[1-6]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register. -in[1-6]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register. +in[1-6]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT + register. in[1-6]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. in[1-6]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. -in[1-6]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status. -in[1-6]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status. +in[1-6]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT + status. +in[1-6]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT + status. in[1-6]_lowest Historical minimum voltage. in[1-6]_highest Historical maximum voltage. in[1-6]_reset_history Write any value to reset history. +======================= ======================================================= - MAX34446 only supports in[1-4]. +.. note:: MAX34446 only supports in[1-4]. +Curr +~~~~ + +======================= ======================================================== curr[1-6]_label "iout[1-6]". curr[1-6]_input Measured current. From READ_IOUT register. curr[1-6]_max Maximum current. From IOUT_OC_WARN_LIMIT register. -curr[1-6]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register. +curr[1-6]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT + register. curr[1-6]_max_alarm Current high alarm. From IOUT_OC_WARNING status. curr[1-6]_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status. curr[1-4]_average Historical average current (MAX34446/34451 only). curr[1-6]_highest Historical maximum current. curr[1-6]_reset_history Write any value to reset history. +======================= ======================================================== - in6 and curr6 attributes only exist for MAX34440. - MAX34446 only supports curr[1-4]. +.. note:: + - in6 and curr6 attributes only exist for MAX34440. + - MAX34446 only supports curr[1-4]. + +Power +~~~~~ + +======================= ======================================================== power[1,3]_label "pout[1,3]" power[1,3]_input Measured power. power[1,3]_average Historical average power. power[1,3]_highest Historical maximum power. +======================= ======================================================== - Power attributes only exist for MAX34446. +.. note:: Power attributes only exist for MAX34446. +Temp +~~~~ + +======================= ======================================================== temp[1-8]_input Measured temperatures. From READ_TEMPERATURE_1 register. temp1 is the chip's internal temperature. temp2..temp5 are remote I2C temperature sensors. For MAX34441, temp6 @@ -125,11 +179,17 @@ temp[1-8]_crit_alarm Temperature critical high alarm. temp[1-8]_average Historical average temperature (MAX34446 only). temp[1-8]_highest Historical maximum temperature. temp[1-8]_reset_history Write any value to reset history. +======================= ======================================================== - temp7 and temp8 attributes only exist for MAX34440. - MAX34446 only supports temp[1-3]. -MAX34451 supports attribute groups in[1-16] (or curr[1-16] based on input pins) -and temp[1-5]. -MAX34460 supports attribute groups in[1-12] and temp[1-5]. -MAX34461 supports attribute groups in[1-16] and temp[1-5]. +.. note:: + - temp7 and temp8 attributes only exist for MAX34440. + - MAX34446 only supports temp[1-3]. + + +.. note:: + + - MAX34451 supports attribute groups in[1-16] (or curr[1-16] based on + input pins) and temp[1-5]. + - MAX34460 supports attribute groups in[1-12] and temp[1-5]. + - MAX34461 supports attribute groups in[1-16] and temp[1-5]. diff --git a/Documentation/hwmon/max8688 b/Documentation/hwmon/max8688 index ca233bec7a8a..43da139234c1 100644 --- a/Documentation/hwmon/max8688 +++ b/Documentation/hwmon/max8688 @@ -2,9 +2,13 @@ Kernel driver max8688 ===================== Supported chips: + * Maxim MAX8688 + Prefix: 'max8688' + Addresses scanned: - + Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8688.pdf Author: Guenter Roeck @@ -40,23 +44,28 @@ Sysfs entries The following attributes are supported. Limits are read-write; all other attributes are read-only. +======================= ======================================================== in1_label "vout1" in1_input Measured voltage. From READ_VOUT register. in1_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register. in1_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. in1_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register. -in1_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register. +in1_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT + register. in1_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. in1_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. -in1_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status. -in1_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status. +in1_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT + status. +in1_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT + status. in1_highest Historical maximum voltage. in1_reset_history Write any value to reset history. curr1_label "iout1" curr1_input Measured current. From READ_IOUT register. curr1_max Maximum current. From IOUT_OC_WARN_LIMIT register. -curr1_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register. +curr1_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT + register. curr1_max_alarm Current high alarm. From IOUT_OC_WARN_LIMIT register. curr1_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status. curr1_highest Historical maximum current. @@ -73,3 +82,4 @@ temp1_crit_alarm Chip temperature critical high alarm. Set by comparing status is set. temp1_highest Historical maximum temperature. temp1_reset_history Write any value to reset history. +======================= ======================================================== diff --git a/Documentation/hwmon/pmbus b/Documentation/hwmon/pmbus index dfd9c65996c0..abfb9dd4857d 100644 --- a/Documentation/hwmon/pmbus +++ b/Documentation/hwmon/pmbus @@ -1,42 +1,77 @@ Kernel driver pmbus -==================== +=================== Supported chips: + * Ericsson BMR453, BMR454 + Prefixes: 'bmr453', 'bmr454' + Addresses scanned: - + Datasheet: + http://archive.ericsson.net/service/internet/picov/get?DocNo=28701-EN/LZT146395 + * ON Semiconductor ADP4000, NCP4200, NCP4208 + Prefixes: 'adp4000', 'ncp4200', 'ncp4208' + Addresses scanned: - + Datasheets: + http://www.onsemi.com/pub_link/Collateral/ADP4000-D.PDF + http://www.onsemi.com/pub_link/Collateral/NCP4200-D.PDF + http://www.onsemi.com/pub_link/Collateral/JUNE%202009-%20REV.%200.PDF + * Lineage Power + Prefixes: 'mdt040', 'pdt003', 'pdt006', 'pdt012', 'udt020' + Addresses scanned: - + Datasheets: + http://www.lineagepower.com/oem/pdf/PDT003A0X.pdf + http://www.lineagepower.com/oem/pdf/PDT006A0X.pdf + http://www.lineagepower.com/oem/pdf/PDT012A0X.pdf + http://www.lineagepower.com/oem/pdf/UDT020A0X.pdf + http://www.lineagepower.com/oem/pdf/MDT040A0X.pdf + * Texas Instruments TPS40400, TPS544B20, TPS544B25, TPS544C20, TPS544C25 + Prefixes: 'tps40400', 'tps544b20', 'tps544b25', 'tps544c20', 'tps544c25' + Addresses scanned: - + Datasheets: + http://www.ti.com/lit/gpn/tps40400 + http://www.ti.com/lit/gpn/tps544b20 + http://www.ti.com/lit/gpn/tps544b25 + http://www.ti.com/lit/gpn/tps544c20 + http://www.ti.com/lit/gpn/tps544c25 + * Generic PMBus devices + Prefix: 'pmbus' + Addresses scanned: - + Datasheet: n.a. + Author: Guenter Roeck @@ -62,9 +97,10 @@ supported by all chips), and since there is no well defined address range for PMBus devices. You will have to instantiate the devices explicitly. Example: the following will load the driver for an LTC2978 at address 0x60 -on I2C bus #1: -$ modprobe pmbus -$ echo ltc2978 0x60 > /sys/bus/i2c/devices/i2c-1/new_device +on I2C bus #1:: + + $ modprobe pmbus + $ echo ltc2978 0x60 > /sys/bus/i2c/devices/i2c-1/new_device Platform data support @@ -72,9 +108,9 @@ Platform data support Support for additional PMBus chips can be added by defining chip parameters in a new chip specific driver file. For example, (untested) code to add support for -Emerson DS1200 power modules might look as follows. +Emerson DS1200 power modules might look as follows:: -static struct pmbus_driver_info ds1200_info = { + static struct pmbus_driver_info ds1200_info = { .pages = 1, /* Note: All other sensors are in linear mode */ .direct[PSC_VOLTAGE_OUT] = true, @@ -95,45 +131,45 @@ static struct pmbus_driver_info ds1200_info = { | PMBUS_HAVE_PIN | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12, -}; + }; -static int ds1200_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ + static int ds1200_probe(struct i2c_client *client, + const struct i2c_device_id *id) + { return pmbus_do_probe(client, id, &ds1200_info); -} + } -static int ds1200_remove(struct i2c_client *client) -{ + static int ds1200_remove(struct i2c_client *client) + { return pmbus_do_remove(client); -} + } -static const struct i2c_device_id ds1200_id[] = { + static const struct i2c_device_id ds1200_id[] = { {"ds1200", 0}, {} -}; + }; -MODULE_DEVICE_TABLE(i2c, ds1200_id); + MODULE_DEVICE_TABLE(i2c, ds1200_id); -/* This is the driver that will be inserted */ -static struct i2c_driver ds1200_driver = { + /* This is the driver that will be inserted */ + static struct i2c_driver ds1200_driver = { .driver = { .name = "ds1200", }, .probe = ds1200_probe, .remove = ds1200_remove, .id_table = ds1200_id, -}; + }; -static int __init ds1200_init(void) -{ + static int __init ds1200_init(void) + { return i2c_add_driver(&ds1200_driver); -} + } -static void __exit ds1200_exit(void) -{ + static void __exit ds1200_exit(void) + { i2c_del_driver(&ds1200_driver); -} + } Sysfs entries @@ -148,6 +184,7 @@ a given sysfs entry. The following attributes are supported. Limits are read-write; all other attributes are read-only. +======================= ======================================================== inX_input Measured voltage. From READ_VIN or READ_VOUT register. inX_min Minimum Voltage. From VIN_UV_WARN_LIMIT or VOUT_UV_WARN_LIMIT register. @@ -214,3 +251,4 @@ tempX_lcrit_alarm Chip temperature critical low alarm. Set by comparing tempX_crit_alarm Chip temperature critical high alarm. Set by comparing READ_TEMPERATURE_X with OT_FAULT_LIMIT if TEMP_OT_FAULT status is set. +======================= ======================================================== diff --git a/Documentation/hwmon/pmbus-core b/Documentation/hwmon/pmbus-core index 8ed10e9ddfb5..92515c446fe3 100644 --- a/Documentation/hwmon/pmbus-core +++ b/Documentation/hwmon/pmbus-core @@ -1,3 +1,4 @@ +================================== PMBus core driver and internal API ================================== @@ -120,24 +121,24 @@ Specifically, it provides the following information. non-standard PMBus commands to standard commands, or to augment standard command return values with device specific information. - API functions - ------------- +API functions +============= - Functions provided by chip driver - --------------------------------- +Functions provided by chip driver +--------------------------------- - All functions return the command return value (read) or zero (write) if - successful. A return value of -ENODATA indicates that there is no manufacturer - specific command, but that a standard PMBus command may exist. Any other - negative return value indicates that the commands does not exist for this - chip, and that no attempt should be made to read or write the standard - command. +All functions return the command return value (read) or zero (write) if +successful. A return value of -ENODATA indicates that there is no manufacturer +specific command, but that a standard PMBus command may exist. Any other +negative return value indicates that the commands does not exist for this +chip, and that no attempt should be made to read or write the standard +command. - As mentioned above, an exception to this rule applies to virtual commands, - which _must_ be handled in driver specific code. See "Virtual PMBus Commands" - above for more details. +As mentioned above, an exception to this rule applies to virtual commands, +which *must* be handled in driver specific code. See "Virtual PMBus Commands" +above for more details. - Command execution in the core PMBus driver code is as follows. +Command execution in the core PMBus driver code is as follows:: if (chip_access_function) { status = chip_access_function(); @@ -148,128 +149,160 @@ Specifically, it provides the following information. return -EINVAL; return generic_access(); - Chip drivers may provide pointers to the following functions in struct - pmbus_driver_info. All functions are optional. +Chip drivers may provide pointers to the following functions in struct +pmbus_driver_info. All functions are optional. + +:: int (*read_byte_data)(struct i2c_client *client, int page, int reg); - Read byte from page , register . - may be -1, which means "current page". +Read byte from page , register . + may be -1, which means "current page". + + +:: int (*read_word_data)(struct i2c_client *client, int page, int reg); - Read word from page , register . +Read word from page , register . + +:: int (*write_word_data)(struct i2c_client *client, int page, int reg, - u16 word); + u16 word); - Write word to page , register . +Write word to page , register . + +:: int (*write_byte)(struct i2c_client *client, int page, u8 value); - Write byte to page , register . - may be -1, which means "current page". +Write byte to page , register . + may be -1, which means "current page". + +:: int (*identify)(struct i2c_client *client, struct pmbus_driver_info *info); - Determine supported PMBus functionality. This function is only necessary - if a chip driver supports multiple chips, and the chip functionality is not - pre-determined. It is currently only used by the generic pmbus driver - (pmbus.c). +Determine supported PMBus functionality. This function is only necessary +if a chip driver supports multiple chips, and the chip functionality is not +pre-determined. It is currently only used by the generic pmbus driver +(pmbus.c). - Functions exported by core driver - --------------------------------- +Functions exported by core driver +--------------------------------- - Chip drivers are expected to use the following functions to read or write - PMBus registers. Chip drivers may also use direct I2C commands. If direct I2C - commands are used, the chip driver code must not directly modify the current - page, since the selected page is cached in the core driver and the core driver - will assume that it is selected. Using pmbus_set_page() to select a new page - is mandatory. +Chip drivers are expected to use the following functions to read or write +PMBus registers. Chip drivers may also use direct I2C commands. If direct I2C +commands are used, the chip driver code must not directly modify the current +page, since the selected page is cached in the core driver and the core driver +will assume that it is selected. Using pmbus_set_page() to select a new page +is mandatory. + +:: int pmbus_set_page(struct i2c_client *client, u8 page); - Set PMBus page register to for subsequent commands. +Set PMBus page register to for subsequent commands. + +:: int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 reg); - Read word data from , . Similar to i2c_smbus_read_word_data(), but - selects page first. +Read word data from , . Similar to i2c_smbus_read_word_data(), but +selects page first. + +:: int pmbus_write_word_data(struct i2c_client *client, u8 page, u8 reg, u16 word); - Write word data to , . Similar to i2c_smbus_write_word_data(), but - selects page first. +Write word data to , . Similar to i2c_smbus_write_word_data(), but +selects page first. + +:: int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg); - Read byte data from , . Similar to i2c_smbus_read_byte_data(), but - selects page first. may be -1, which means "current page". +Read byte data from , . Similar to i2c_smbus_read_byte_data(), but +selects page first. may be -1, which means "current page". + +:: int pmbus_write_byte(struct i2c_client *client, int page, u8 value); - Write byte data to , . Similar to i2c_smbus_write_byte(), but - selects page first. may be -1, which means "current page". +Write byte data to , . Similar to i2c_smbus_write_byte(), but +selects page first. may be -1, which means "current page". + +:: void pmbus_clear_faults(struct i2c_client *client); - Execute PMBus "Clear Fault" command on all chip pages. - This function calls the device specific write_byte function if defined. - Therefore, it must _not_ be called from that function. +Execute PMBus "Clear Fault" command on all chip pages. +This function calls the device specific write_byte function if defined. +Therefore, it must _not_ be called from that function. + +:: bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg); - Check if byte register exists. Return true if the register exists, false - otherwise. - This function calls the device specific write_byte function if defined to - obtain the chip status. Therefore, it must _not_ be called from that function. +Check if byte register exists. Return true if the register exists, false +otherwise. +This function calls the device specific write_byte function if defined to +obtain the chip status. Therefore, it must _not_ be called from that function. + +:: bool pmbus_check_word_register(struct i2c_client *client, int page, int reg); - Check if word register exists. Return true if the register exists, false - otherwise. - This function calls the device specific write_byte function if defined to - obtain the chip status. Therefore, it must _not_ be called from that function. +Check if word register exists. Return true if the register exists, false +otherwise. +This function calls the device specific write_byte function if defined to +obtain the chip status. Therefore, it must _not_ be called from that function. + +:: int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id, - struct pmbus_driver_info *info); + struct pmbus_driver_info *info); - Execute probe function. Similar to standard probe function for other drivers, - with the pointer to struct pmbus_driver_info as additional argument. Calls - identify function if supported. Must only be called from device probe - function. +Execute probe function. Similar to standard probe function for other drivers, +with the pointer to struct pmbus_driver_info as additional argument. Calls +identify function if supported. Must only be called from device probe +function. + +:: void pmbus_do_remove(struct i2c_client *client); - Execute driver remove function. Similar to standard driver remove function. +Execute driver remove function. Similar to standard driver remove function. + +:: const struct pmbus_driver_info *pmbus_get_driver_info(struct i2c_client *client); - Return pointer to struct pmbus_driver_info as passed to pmbus_do_probe(). +Return pointer to struct pmbus_driver_info as passed to pmbus_do_probe(). PMBus driver platform data ========================== PMBus platform data is defined in include/linux/pmbus.h. Platform data -currently only provides a flag field with a single bit used. +currently only provides a flag field with a single bit used:: -#define PMBUS_SKIP_STATUS_CHECK (1 << 0) + #define PMBUS_SKIP_STATUS_CHECK (1 << 0) -struct pmbus_platform_data { - u32 flags; /* Device specific flags */ -}; + struct pmbus_platform_data { + u32 flags; /* Device specific flags */ + }; Flags ----- PMBUS_SKIP_STATUS_CHECK - -During register detection, skip checking the status register for -communication or command errors. + During register detection, skip checking the status register for + communication or command errors. Some PMBus chips respond with valid data when trying to read an unsupported register. For such chips, checking the status register is mandatory when diff --git a/Documentation/hwmon/tps40422 b/Documentation/hwmon/tps40422 index 24bb0688d515..359751eb5ed4 100644 --- a/Documentation/hwmon/tps40422 +++ b/Documentation/hwmon/tps40422 @@ -2,9 +2,13 @@ Kernel driver tps40422 ====================== Supported chips: + * TI TPS40422 + Prefix: 'tps40422' + Addresses scanned: - + Datasheet: http://www.ti.com/lit/gpn/tps40422 Author: Zhu Laiwen @@ -39,6 +43,7 @@ Sysfs entries The following attributes are supported. +======================= ======================================================= in[1-2]_label "vout[1-2]" in[1-2]_input Measured voltage. From READ_VOUT register. in[1-2]_alarm voltage alarm. @@ -46,19 +51,23 @@ in[1-2]_alarm voltage alarm. curr[1-2]_input Measured current. From READ_IOUT register. curr[1-2]_label "iout[1-2]" curr1_max Maximum current. From IOUT_OC_WARN_LIMIT register. -curr1_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register. +curr1_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT + register. curr1_max_alarm Current high alarm. From IOUT_OC_WARN_LIMIT status. curr1_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status. curr2_alarm Current high alarm. From IOUT_OC_WARNING status. -temp1_input Measured temperature. From READ_TEMPERATURE_2 register on page 0. +temp1_input Measured temperature. From READ_TEMPERATURE_2 register + on page 0. temp1_max Maximum temperature. From OT_WARN_LIMIT register. temp1_crit Critical high temperature. From OT_FAULT_LIMIT register. temp1_max_alarm Chip temperature high alarm. Set by comparing - READ_TEMPERATURE_2 on page 0 with OT_WARN_LIMIT if TEMP_OT_WARNING - status is set. + READ_TEMPERATURE_2 on page 0 with OT_WARN_LIMIT if + TEMP_OT_WARNING status is set. temp1_crit_alarm Chip temperature critical high alarm. Set by comparing - READ_TEMPERATURE_2 on page 0 with OT_FAULT_LIMIT if TEMP_OT_FAULT - status is set. -temp2_input Measured temperature. From READ_TEMPERATURE_2 register on page 1. + READ_TEMPERATURE_2 on page 0 with OT_FAULT_LIMIT if + TEMP_OT_FAULT status is set. +temp2_input Measured temperature. From READ_TEMPERATURE_2 register + on page 1. temp2_alarm Chip temperature alarm on page 1. +======================= ======================================================= diff --git a/Documentation/hwmon/ucd9000 b/Documentation/hwmon/ucd9000 index 262e713e60ff..d69061b7312c 100644 --- a/Documentation/hwmon/ucd9000 +++ b/Documentation/hwmon/ucd9000 @@ -2,15 +2,20 @@ Kernel driver ucd9000 ===================== Supported chips: + * TI UCD90120, UCD90124, UCD90160, UCD9090, and UCD90910 + Prefixes: 'ucd90120', 'ucd90124', 'ucd90160', 'ucd9090', 'ucd90910' + Addresses scanned: - + Datasheets: - http://focus.ti.com/lit/ds/symlink/ucd90120.pdf - http://focus.ti.com/lit/ds/symlink/ucd90124.pdf - http://focus.ti.com/lit/ds/symlink/ucd90160.pdf - http://focus.ti.com/lit/ds/symlink/ucd9090.pdf - http://focus.ti.com/lit/ds/symlink/ucd90910.pdf + + - http://focus.ti.com/lit/ds/symlink/ucd90120.pdf + - http://focus.ti.com/lit/ds/symlink/ucd90124.pdf + - http://focus.ti.com/lit/ds/symlink/ucd90160.pdf + - http://focus.ti.com/lit/ds/symlink/ucd9090.pdf + - http://focus.ti.com/lit/ds/symlink/ucd90910.pdf Author: Guenter Roeck @@ -76,23 +81,28 @@ Sysfs entries The following attributes are supported. Limits are read-write; all other attributes are read-only. +======================= ======================================================== in[1-12]_label "vout[1-12]". in[1-12]_input Measured voltage. From READ_VOUT register. in[1-12]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register. in[1-12]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. in[1-12]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register. -in[1-12]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register. +in[1-12]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT + register. in[1-12]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. in[1-12]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. -in[1-12]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status. -in[1-12]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status. +in[1-12]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT + status. +in[1-12]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT + status. curr[1-12]_label "iout[1-12]". curr[1-12]_input Measured current. From READ_IOUT register. curr[1-12]_max Maximum current. From IOUT_OC_WARN_LIMIT register. -curr[1-12]_lcrit Critical minimum output current. From IOUT_UC_FAULT_LIMIT +curr[1-12]_lcrit Critical minimum output current. From + IOUT_UC_FAULT_LIMIT register. +curr[1-12]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register. -curr[1-12]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register. curr[1-12]_max_alarm Current high alarm. From IOUT_OC_WARNING status. curr[1-12]_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status. @@ -116,3 +126,4 @@ fan[1-4]_fault Fan fault. created only for enabled fans. Note that even though UCD90910 supports up to 10 fans, only up to four fans are currently supported. +======================= ======================================================== diff --git a/Documentation/hwmon/ucd9200 b/Documentation/hwmon/ucd9200 index 1e8060e631bd..44eda4a579b6 100644 --- a/Documentation/hwmon/ucd9200 +++ b/Documentation/hwmon/ucd9200 @@ -2,18 +2,23 @@ Kernel driver ucd9200 ===================== Supported chips: + * TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248 + Prefixes: 'ucd9220', 'ucd9222', 'ucd9224', 'ucd9240', 'ucd9244', 'ucd9246', - 'ucd9248' + 'ucd9248' + Addresses scanned: - + Datasheets: - http://focus.ti.com/lit/ds/symlink/ucd9220.pdf - http://focus.ti.com/lit/ds/symlink/ucd9222.pdf - http://focus.ti.com/lit/ds/symlink/ucd9224.pdf - http://focus.ti.com/lit/ds/symlink/ucd9240.pdf - http://focus.ti.com/lit/ds/symlink/ucd9244.pdf - http://focus.ti.com/lit/ds/symlink/ucd9246.pdf - http://focus.ti.com/lit/ds/symlink/ucd9248.pdf + + - http://focus.ti.com/lit/ds/symlink/ucd9220.pdf + - http://focus.ti.com/lit/ds/symlink/ucd9222.pdf + - http://focus.ti.com/lit/ds/symlink/ucd9224.pdf + - http://focus.ti.com/lit/ds/symlink/ucd9240.pdf + - http://focus.ti.com/lit/ds/symlink/ucd9244.pdf + - http://focus.ti.com/lit/ds/symlink/ucd9246.pdf + - http://focus.ti.com/lit/ds/symlink/ucd9248.pdf Author: Guenter Roeck @@ -52,12 +57,14 @@ Sysfs entries The following attributes are supported. Limits are read-write; all other attributes are read-only. +======================= ======================================================== in1_label "vin". in1_input Measured voltage. From READ_VIN register. in1_min Minimum Voltage. From VIN_UV_WARN_LIMIT register. in1_max Maximum voltage. From VIN_OV_WARN_LIMIT register. in1_lcrit Critical minimum Voltage. VIN_UV_FAULT_LIMIT register. -in1_crit Critical maximum voltage. From VIN_OV_FAULT_LIMIT register. +in1_crit Critical maximum voltage. From VIN_OV_FAULT_LIMIT + register. in1_min_alarm Voltage low alarm. From VIN_UV_WARNING status. in1_max_alarm Voltage high alarm. From VIN_OV_WARNING status. in1_lcrit_alarm Voltage critical low alarm. From VIN_UV_FAULT status. @@ -68,11 +75,14 @@ in[2-5]_input Measured voltage. From READ_VOUT register. in[2-5]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register. in[2-5]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. in[2-5]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register. -in[2-5]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register. +in[2-5]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT + register. in[2-5]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. in[2-5]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. -in[2-5]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status. -in[2-5]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status. +in[2-5]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT + status. +in[2-5]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT + status. curr1_label "iin". curr1_input Measured current. From READ_IIN register. @@ -80,9 +90,10 @@ curr1_input Measured current. From READ_IIN register. curr[2-5]_label "iout[1-4]". curr[2-5]_input Measured current. From READ_IOUT register. curr[2-5]_max Maximum current. From IOUT_OC_WARN_LIMIT register. -curr[2-5]_lcrit Critical minimum output current. From IOUT_UC_FAULT_LIMIT +curr[2-5]_lcrit Critical minimum output current. From + IOUT_UC_FAULT_LIMIT register. +curr[2-5]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register. -curr[2-5]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register. curr[2-5]_max_alarm Current high alarm. From IOUT_OC_WARNING status. curr[2-5]_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status. @@ -97,7 +108,7 @@ power[2-5]_label "pout[1-4]" rails. See chip datasheets for details. temp[1-5]_input Measured temperatures. From READ_TEMPERATURE_1 and - READ_TEMPERATURE_2 registers. + READ_TEMPERATURE_2 registers. temp1 is the chip internal temperature. temp[2-5] are rail temperatures. temp[2-5] attributes are only created for enabled rails. See chip datasheets for @@ -110,3 +121,4 @@ temp[1-5]_crit_alarm Temperature critical high alarm. fan1_input Fan RPM. ucd9240 only. fan1_alarm Fan alarm. ucd9240 only. fan1_fault Fan fault. ucd9240 only. +======================= ======================================================== diff --git a/Documentation/hwmon/zl6100 b/Documentation/hwmon/zl6100 index 477a94b131ae..4029970bace4 100644 --- a/Documentation/hwmon/zl6100 +++ b/Documentation/hwmon/zl6100 @@ -2,57 +2,106 @@ Kernel driver zl6100 ==================== Supported chips: - * Intersil / Zilker Labs ZL2004 - Prefix: 'zl2004' - Addresses scanned: - - Datasheet: http://www.intersil.com/data/fn/fn6847.pdf - * Intersil / Zilker Labs ZL2005 - Prefix: 'zl2005' - Addresses scanned: - - Datasheet: http://www.intersil.com/data/fn/fn6848.pdf - * Intersil / Zilker Labs ZL2006 - Prefix: 'zl2006' - Addresses scanned: - - Datasheet: http://www.intersil.com/data/fn/fn6850.pdf - * Intersil / Zilker Labs ZL2008 - Prefix: 'zl2008' - Addresses scanned: - - Datasheet: http://www.intersil.com/data/fn/fn6859.pdf - * Intersil / Zilker Labs ZL2105 - Prefix: 'zl2105' - Addresses scanned: - - Datasheet: http://www.intersil.com/data/fn/fn6851.pdf - * Intersil / Zilker Labs ZL2106 - Prefix: 'zl2106' - Addresses scanned: - - Datasheet: http://www.intersil.com/data/fn/fn6852.pdf - * Intersil / Zilker Labs ZL6100 - Prefix: 'zl6100' - Addresses scanned: - - Datasheet: http://www.intersil.com/data/fn/fn6876.pdf - * Intersil / Zilker Labs ZL6105 - Prefix: 'zl6105' - Addresses scanned: - - Datasheet: http://www.intersil.com/data/fn/fn6906.pdf - * Intersil / Zilker Labs ZL9101M - Prefix: 'zl9101' - Addresses scanned: - - Datasheet: http://www.intersil.com/data/fn/fn7669.pdf - * Intersil / Zilker Labs ZL9117M - Prefix: 'zl9117' - Addresses scanned: - - Datasheet: http://www.intersil.com/data/fn/fn7914.pdf - * Ericsson BMR450, BMR451 - Prefix: 'bmr450', 'bmr451' - Addresses scanned: - - Datasheet: -http://archive.ericsson.net/service/internet/picov/get?DocNo=28701-EN/LZT146401 - * Ericsson BMR462, BMR463, BMR464 - Prefixes: 'bmr462', 'bmr463', 'bmr464' - Addresses scanned: - - Datasheet: -http://archive.ericsson.net/service/internet/picov/get?DocNo=28701-EN/LZT146256 + * Intersil / Zilker Labs ZL2004 + + Prefix: 'zl2004' + + Addresses scanned: - + + Datasheet: http://www.intersil.com/data/fn/fn6847.pdf + + * Intersil / Zilker Labs ZL2005 + + Prefix: 'zl2005' + + Addresses scanned: - + + Datasheet: http://www.intersil.com/data/fn/fn6848.pdf + + * Intersil / Zilker Labs ZL2006 + + Prefix: 'zl2006' + + Addresses scanned: - + + Datasheet: http://www.intersil.com/data/fn/fn6850.pdf + + * Intersil / Zilker Labs ZL2008 + + Prefix: 'zl2008' + + Addresses scanned: - + + Datasheet: http://www.intersil.com/data/fn/fn6859.pdf + + * Intersil / Zilker Labs ZL2105 + + Prefix: 'zl2105' + + Addresses scanned: - + + Datasheet: http://www.intersil.com/data/fn/fn6851.pdf + + * Intersil / Zilker Labs ZL2106 + + Prefix: 'zl2106' + + Addresses scanned: - + + Datasheet: http://www.intersil.com/data/fn/fn6852.pdf + + * Intersil / Zilker Labs ZL6100 + + Prefix: 'zl6100' + + Addresses scanned: - + + Datasheet: http://www.intersil.com/data/fn/fn6876.pdf + + * Intersil / Zilker Labs ZL6105 + + Prefix: 'zl6105' + + Addresses scanned: - + + Datasheet: http://www.intersil.com/data/fn/fn6906.pdf + + * Intersil / Zilker Labs ZL9101M + + Prefix: 'zl9101' + + Addresses scanned: - + + Datasheet: http://www.intersil.com/data/fn/fn7669.pdf + + * Intersil / Zilker Labs ZL9117M + + Prefix: 'zl9117' + + Addresses scanned: - + + Datasheet: http://www.intersil.com/data/fn/fn7914.pdf + + * Ericsson BMR450, BMR451 + + Prefix: 'bmr450', 'bmr451' + + Addresses scanned: - + + Datasheet: + +http://archive.ericsson.net/service/internet/picov/get?DocNo=28701-EN/LZT146401 + + * Ericsson BMR462, BMR463, BMR464 + + Prefixes: 'bmr462', 'bmr463', 'bmr464' + + Addresses scanned: - + + Datasheet: + + http://archive.ericsson.net/service/internet/picov/get?DocNo=28701-EN/LZT146256 Author: Guenter Roeck @@ -75,13 +124,15 @@ This driver does not auto-detect devices. You will have to instantiate the devices explicitly. Please see Documentation/i2c/instantiating-devices for details. -WARNING: Do not access chip registers using the i2cdump command, and do not use -any of the i2ctools commands on a command register used to save and restore -configuration data (0x11, 0x12, 0x15, 0x16, and 0xf4). The chips supported by -this driver interpret any access to those command registers (including read -commands) as request to execute the command in question. Unless write accesses -to those registers are protected, this may result in power loss, board resets, -and/or Flash corruption. Worst case, your board may turn into a brick. +.. warning:: + + Do not access chip registers using the i2cdump command, and do not use + any of the i2ctools commands on a command register used to save and restore + configuration data (0x11, 0x12, 0x15, 0x16, and 0xf4). The chips supported by + this driver interpret any access to those command registers (including read + commands) as request to execute the command in question. Unless write accesses + to those registers are protected, this may result in power loss, board resets, + and/or Flash corruption. Worst case, your board may turn into a brick. Platform data support @@ -110,6 +161,7 @@ Sysfs entries The following attributes are supported. Limits are read-write; all other attributes are read-only. +======================= ======================================================== in1_label "vin" in1_input Measured input voltage. in1_min Minimum input voltage. @@ -158,3 +210,4 @@ temp[12]_min_alarm Chip temperature low alarm. temp[12]_max_alarm Chip temperature high alarm. temp[12]_lcrit_alarm Chip temperature critical low alarm. temp[12]_crit_alarm Chip temperature critical high alarm. +======================= ======================================================== From b32570a4f0919569bcba13a5419ea97ca5c1d3cf Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 17 Apr 2019 06:46:27 -0300 Subject: [PATCH 114/125] docs: hwmon: misc files: convert to ReST format Convert other files maintained by Guenter to ReST format, in order to allow them to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Guenter Roeck --- Documentation/hwmon/ina209 | 26 +++--- Documentation/hwmon/ina2xx | 39 ++++++-- Documentation/hwmon/jc42 | 55 +++++++++++- Documentation/hwmon/lm95234 | 23 +++-- Documentation/hwmon/ltc4261 | 16 +++- Documentation/hwmon/max16065 | 64 ++++++++----- Documentation/hwmon/max6697 | 33 +++++++ Documentation/hwmon/nct6775 | 170 ++++++++++++++++++++++++----------- Documentation/hwmon/smm665 | 42 +++++++-- Documentation/hwmon/tmp401 | 30 ++++++- 10 files changed, 386 insertions(+), 112 deletions(-) diff --git a/Documentation/hwmon/ina209 b/Documentation/hwmon/ina209 index 672501de4509..64322075a145 100644 --- a/Documentation/hwmon/ina209 +++ b/Documentation/hwmon/ina209 @@ -1,16 +1,21 @@ Kernel driver ina209 -===================== +==================== Supported chips: - * Burr-Brown / Texas Instruments INA209 - Prefix: 'ina209' - Addresses scanned: - - Datasheet: - http://www.ti.com/lit/gpn/ina209 -Author: Paul Hays -Author: Ira W. Snyder -Author: Guenter Roeck + * Burr-Brown / Texas Instruments INA209 + + Prefix: 'ina209' + + Addresses scanned: - + + Datasheet: + http://www.ti.com/lit/gpn/ina209 + +Author: + - Paul Hays + - Ira W. Snyder + - Guenter Roeck Description @@ -31,7 +36,7 @@ the I2C bus. See the datasheet for details. This tries to expose most monitoring features of the hardware via sysfs. It does not support every feature of this chip. - +======================= ======================================================= in0_input shunt voltage (mV) in0_input_highest shunt voltage historical maximum reading (mV) in0_input_lowest shunt voltage historical minimum reading (mV) @@ -70,6 +75,7 @@ curr1_input current measurement (mA) update_interval data conversion time; affects number of samples used to average results for shunt and bus voltages. +======================= ======================================================= General Remarks --------------- diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx index 0f36c021192d..95badf9c396f 100644 --- a/Documentation/hwmon/ina2xx +++ b/Documentation/hwmon/ina2xx @@ -2,35 +2,56 @@ Kernel driver ina2xx ==================== Supported chips: + * Texas Instruments INA219 + + Prefix: 'ina219' Addresses: I2C 0x40 - 0x4f + Datasheet: Publicly available at the Texas Instruments website - http://www.ti.com/ + + http://www.ti.com/ * Texas Instruments INA220 + Prefix: 'ina220' + Addresses: I2C 0x40 - 0x4f + Datasheet: Publicly available at the Texas Instruments website - http://www.ti.com/ + + http://www.ti.com/ * Texas Instruments INA226 + Prefix: 'ina226' + Addresses: I2C 0x40 - 0x4f + Datasheet: Publicly available at the Texas Instruments website - http://www.ti.com/ + + http://www.ti.com/ * Texas Instruments INA230 + Prefix: 'ina230' + Addresses: I2C 0x40 - 0x4f + Datasheet: Publicly available at the Texas Instruments website - http://www.ti.com/ + + http://www.ti.com/ * Texas Instruments INA231 + Prefix: 'ina231' + Addresses: I2C 0x40 - 0x4f + Datasheet: Publicly available at the Texas Instruments website - http://www.ti.com/ + + http://www.ti.com/ Author: Lothar Felten @@ -64,16 +85,20 @@ lower limit of the update_interval is 2 ms, the upper limit is 2253 ms. The actual programmed interval may vary from the desired value. General sysfs entries -------------- +--------------------- +======================= =============================== in0_input Shunt voltage(mV) channel in1_input Bus voltage(mV) channel curr1_input Current(mA) measurement channel power1_input Power(uW) measurement channel shunt_resistor Shunt resistance(uOhm) channel +======================= =============================== Sysfs entries for ina226, ina230 and ina231 only -------------- +------------------------------------------------ +======================= ==================================================== update_interval data conversion time; affects number of samples used to average results for shunt and bus voltages. +======================= ==================================================== diff --git a/Documentation/hwmon/jc42 b/Documentation/hwmon/jc42 index b4b671f22453..5b14b49bb6f7 100644 --- a/Documentation/hwmon/jc42 +++ b/Documentation/hwmon/jc42 @@ -2,53 +2,100 @@ Kernel driver jc42 ================== Supported chips: + * Analog Devices ADT7408 + Datasheets: + http://www.analog.com/static/imported-files/data_sheets/ADT7408.pdf + * Atmel AT30TS00, AT30TS002A/B, AT30TSE004A + Datasheets: + http://www.atmel.com/Images/doc8585.pdf + http://www.atmel.com/Images/doc8711.pdf + http://www.atmel.com/Images/Atmel-8852-SEEPROM-AT30TSE002A-Datasheet.pdf + http://www.atmel.com/Images/Atmel-8868-DTS-AT30TSE004A-Datasheet.pdf + * IDT TSE2002B3, TSE2002GB2, TSE2004GB2, TS3000B3, TS3000GB0, TS3000GB2, + TS3001GB2 + Datasheets: + Available from IDT web site + * Maxim MAX6604 + Datasheets: + http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf + * Microchip MCP9804, MCP9805, MCP9808, MCP98242, MCP98243, MCP98244, MCP9843 + Datasheets: + http://ww1.microchip.com/downloads/en/DeviceDoc/22203C.pdf + http://ww1.microchip.com/downloads/en/DeviceDoc/21977b.pdf + http://ww1.microchip.com/downloads/en/DeviceDoc/25095A.pdf + http://ww1.microchip.com/downloads/en/DeviceDoc/21996a.pdf + http://ww1.microchip.com/downloads/en/DeviceDoc/22153c.pdf + http://ww1.microchip.com/downloads/en/DeviceDoc/22327A.pdf + * NXP Semiconductors SE97, SE97B, SE98, SE98A + Datasheets: + http://www.nxp.com/documents/data_sheet/SE97.pdf + http://www.nxp.com/documents/data_sheet/SE97B.pdf + http://www.nxp.com/documents/data_sheet/SE98.pdf + http://www.nxp.com/documents/data_sheet/SE98A.pdf + * ON Semiconductor CAT34TS02, CAT6095 + Datasheet: + http://www.onsemi.com/pub_link/Collateral/CAT34TS02-D.PDF + http://www.onsemi.com/pub/Collateral/CAT6095-D.PDF + * ST Microelectronics STTS424, STTS424E02, STTS2002, STTS2004, STTS3000 + Datasheets: + http://www.st.com/web/en/resource/technical/document/datasheet/CD00157556.pdf + http://www.st.com/web/en/resource/technical/document/datasheet/CD00157558.pdf + http://www.st.com/web/en/resource/technical/document/datasheet/CD00266638.pdf + http://www.st.com/web/en/resource/technical/document/datasheet/CD00225278.pdf + http://www.st.com/web/en/resource/technical/document/datasheet/DM00076709.pdf + * JEDEC JC 42.4 compliant temperature sensor chips + Datasheet: + http://www.jedec.org/sites/default/files/docs/4_01_04R19.pdf + Common for all chips: + Prefix: 'jc42' + Addresses scanned: I2C 0x18 - 0x1f Author: @@ -67,10 +114,10 @@ The driver auto-detects the chips listed above, but can be manually instantiated to support other JC 42.4 compliant chips. Example: the following will load the driver for a generic JC 42.4 compliant -temperature sensor at address 0x18 on I2C bus #1: +temperature sensor at address 0x18 on I2C bus #1:: -# modprobe jc42 -# echo jc42 0x18 > /sys/bus/i2c/devices/i2c-1/new_device + # modprobe jc42 + # echo jc42 0x18 > /sys/bus/i2c/devices/i2c-1/new_device A JC 42.4 compliant chip supports a single temperature sensor. Minimum, maximum, and critical temperature can be configured. There are alarms for high, low, @@ -90,6 +137,7 @@ cannot be changed. Sysfs entries ------------- +======================= =========================================== temp1_input Temperature (RO) temp1_min Minimum temperature (RO or RW) temp1_max Maximum temperature (RO or RW) @@ -101,3 +149,4 @@ temp1_max_hyst Maximum hysteresis temperature (RO) temp1_min_alarm Temperature low alarm temp1_max_alarm Temperature high alarm temp1_crit_alarm Temperature critical alarm +======================= =========================================== diff --git a/Documentation/hwmon/lm95234 b/Documentation/hwmon/lm95234 index 32b777ef224c..e4c14bea5efd 100644 --- a/Documentation/hwmon/lm95234 +++ b/Documentation/hwmon/lm95234 @@ -2,15 +2,22 @@ Kernel driver lm95234 ===================== Supported chips: - * National Semiconductor / Texas Instruments LM95233 - Addresses scanned: I2C 0x18, 0x2a, 0x2b - Datasheet: Publicly available at the Texas Instruments website - http://www.ti.com/product/lm95233 - * National Semiconductor / Texas Instruments LM95234 - Addresses scanned: I2C 0x18, 0x4d, 0x4e - Datasheet: Publicly available at the Texas Instruments website - http://www.ti.com/product/lm95234 + * National Semiconductor / Texas Instruments LM95233 + + Addresses scanned: I2C 0x18, 0x2a, 0x2b + + Datasheet: Publicly available at the Texas Instruments website + + http://www.ti.com/product/lm95233 + + * National Semiconductor / Texas Instruments LM95234 + + Addresses scanned: I2C 0x18, 0x4d, 0x4e + + Datasheet: Publicly available at the Texas Instruments website + + http://www.ti.com/product/lm95234 Author: Guenter Roeck diff --git a/Documentation/hwmon/ltc4261 b/Documentation/hwmon/ltc4261 index 9378a75c6134..c80233f8082e 100644 --- a/Documentation/hwmon/ltc4261 +++ b/Documentation/hwmon/ltc4261 @@ -2,11 +2,16 @@ Kernel driver ltc4261 ===================== Supported chips: + * Linear Technology LTC4261 + Prefix: 'ltc4261' + Addresses scanned: - + Datasheet: - http://cds.linear.com/docs/Datasheet/42612fb.pdf + + http://cds.linear.com/docs/Datasheet/42612fb.pdf Author: Guenter Roeck @@ -26,9 +31,10 @@ which can be safely used to identify the chip. You will have to instantiate the devices explicitly. Example: the following will load the driver for an LTC4261 at address 0x10 -on I2C bus #1: -$ modprobe ltc4261 -$ echo ltc4261 0x10 > /sys/bus/i2c/devices/i2c-1/new_device +on I2C bus #1:: + + $ modprobe ltc4261 + $ echo ltc4261 0x10 > /sys/bus/i2c/devices/i2c-1/new_device Sysfs entries @@ -51,6 +57,7 @@ the proximity of the ADIN2 pin to the OV pin. ADIN2 is, however, not available on all chip variants. To ensure that the alarm condition is reported to the user, report it with both voltage sensors. +======================= ============================= in1_input ADIN2 voltage (mV) in1_min_alarm ADIN/ADIN2 Undervoltage alarm in1_max_alarm ADIN/ADIN2 Overvoltage alarm @@ -61,3 +68,4 @@ in2_max_alarm ADIN/ADIN2 Overvoltage alarm curr1_input SENSE current (mA) curr1_alarm SENSE overcurrent alarm +======================= ============================= diff --git a/Documentation/hwmon/max16065 b/Documentation/hwmon/max16065 index 208a29e43010..fa5c852a178c 100644 --- a/Documentation/hwmon/max16065 +++ b/Documentation/hwmon/max16065 @@ -1,28 +1,48 @@ Kernel driver max16065 ====================== -Supported chips: - * Maxim MAX16065, MAX16066 - Prefixes: 'max16065', 'max16066' - Addresses scanned: - - Datasheet: - http://datasheets.maxim-ic.com/en/ds/MAX16065-MAX16066.pdf - * Maxim MAX16067 - Prefix: 'max16067' - Addresses scanned: - - Datasheet: - http://datasheets.maxim-ic.com/en/ds/MAX16067.pdf - * Maxim MAX16068 - Prefix: 'max16068' - Addresses scanned: - - Datasheet: - http://datasheets.maxim-ic.com/en/ds/MAX16068.pdf - * Maxim MAX16070/MAX16071 - Prefixes: 'max16070', 'max16071' - Addresses scanned: - - Datasheet: - http://datasheets.maxim-ic.com/en/ds/MAX16070-MAX16071.pdf +Supported chips: + + * Maxim MAX16065, MAX16066 + + Prefixes: 'max16065', 'max16066' + + Addresses scanned: - + + Datasheet: + + http://datasheets.maxim-ic.com/en/ds/MAX16065-MAX16066.pdf + + * Maxim MAX16067 + + Prefix: 'max16067' + + Addresses scanned: - + + Datasheet: + + http://datasheets.maxim-ic.com/en/ds/MAX16067.pdf + + * Maxim MAX16068 + + Prefix: 'max16068' + + Addresses scanned: - + + Datasheet: + + http://datasheets.maxim-ic.com/en/ds/MAX16068.pdf + + * Maxim MAX16070/MAX16071 + + Prefixes: 'max16070', 'max16071' + + Addresses scanned: - + + Datasheet: + + http://datasheets.maxim-ic.com/en/ds/MAX16070-MAX16071.pdf Author: Guenter Roeck @@ -73,6 +93,7 @@ turn into a brick. Sysfs entries ------------- +======================= ======================================================== in[0-11]_input Input voltage measurements. in12_input Voltage on CSP (Current Sense Positive) pin. @@ -103,3 +124,4 @@ curr1_input Current sense input; only if the chip supports current curr1_alarm Overcurrent alarm; only if the chip supports current sensing and if current sensing is enabled. +======================= ======================================================== diff --git a/Documentation/hwmon/max6697 b/Documentation/hwmon/max6697 index 6594177ededa..ffc5a7d8d33b 100644 --- a/Documentation/hwmon/max6697 +++ b/Documentation/hwmon/max6697 @@ -2,38 +2,69 @@ Kernel driver max6697 ===================== Supported chips: + * Maxim MAX6581 + Prefix: 'max6581' + Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6581.pdf + * Maxim MAX6602 + Prefix: 'max6602' + Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6602.pdf + * Maxim MAX6622 + Prefix: 'max6622' + Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6622.pdf + * Maxim MAX6636 + Prefix: 'max6636' + Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6636.pdf + * Maxim MAX6689 + Prefix: 'max6689' + Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6689.pdf + * Maxim MAX6693 + Prefix: 'max6693' + Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6693.pdf + * Maxim MAX6694 + Prefix: 'max6694' + Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6694.pdf + * Maxim MAX6697 + Prefix: 'max6697' + Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6697.pdf + * Maxim MAX6698 + Prefix: 'max6698' + Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6698.pdf + * Maxim MAX6699 + Prefix: 'max6699' + Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6699.pdf Author: + Guenter Roeck Description @@ -50,9 +81,11 @@ The driver provides the following sysfs attributes. temp1 is the local (chip) temperature, temp[2..n] are remote temperatures. The actually supported per-channel attributes are chip type and channel dependent. +================ == ========================================================== tempX_input RO temperature tempX_max RW temperature maximum threshold tempX_max_alarm RO temperature maximum threshold alarm tempX_crit RW temperature critical threshold tempX_crit_alarm RO temperature critical threshold alarm tempX_fault RO temperature diode fault (remote sensors only) +================ == ========================================================== diff --git a/Documentation/hwmon/nct6775 b/Documentation/hwmon/nct6775 index bd59834d310f..1d0315c40952 100644 --- a/Documentation/hwmon/nct6775 +++ b/Documentation/hwmon/nct6775 @@ -1,52 +1,90 @@ -Note -==== - -This driver supersedes the NCT6775F and NCT6776F support in the W83627EHF -driver. - Kernel driver NCT6775 ===================== +.. note:: + + This driver supersedes the NCT6775F and NCT6776F support in the W83627EHF + driver. + Supported chips: + * Nuvoton NCT6102D/NCT6104D/NCT6106D + Prefix: 'nct6106' + Addresses scanned: ISA address retrieved from Super I/O registers + Datasheet: Available from the Nuvoton web site + * Nuvoton NCT5572D/NCT6771F/NCT6772F/NCT6775F/W83677HG-I + Prefix: 'nct6775' + Addresses scanned: ISA address retrieved from Super I/O registers - Datasheet: Available from Nuvoton upon request - * Nuvoton NCT5573D/NCT5577D/NCT6776D/NCT6776F - Prefix: 'nct6776' - Addresses scanned: ISA address retrieved from Super I/O registers - Datasheet: Available from Nuvoton upon request - * Nuvoton NCT5532D/NCT6779D - Prefix: 'nct6779' - Addresses scanned: ISA address retrieved from Super I/O registers - Datasheet: Available from Nuvoton upon request - * Nuvoton NCT6791D - Prefix: 'nct6791' - Addresses scanned: ISA address retrieved from Super I/O registers - Datasheet: Available from Nuvoton upon request - * Nuvoton NCT6792D - Prefix: 'nct6792' - Addresses scanned: ISA address retrieved from Super I/O registers - Datasheet: Available from Nuvoton upon request - * Nuvoton NCT6793D - Prefix: 'nct6793' - Addresses scanned: ISA address retrieved from Super I/O registers - Datasheet: Available from Nuvoton upon request - * Nuvoton NCT6795D - Prefix: 'nct6795' - Addresses scanned: ISA address retrieved from Super I/O registers - Datasheet: Available from Nuvoton upon request - * Nuvoton NCT6796D - Prefix: 'nct6796' - Addresses scanned: ISA address retrieved from Super I/O registers + Datasheet: Available from Nuvoton upon request + * Nuvoton NCT5573D/NCT5577D/NCT6776D/NCT6776F + + Prefix: 'nct6776' + + Addresses scanned: ISA address retrieved from Super I/O registers + + Datasheet: Available from Nuvoton upon request + + * Nuvoton NCT5532D/NCT6779D + + Prefix: 'nct6779' + + Addresses scanned: ISA address retrieved from Super I/O registers + + Datasheet: Available from Nuvoton upon request + + * Nuvoton NCT6791D + + Prefix: 'nct6791' + + Addresses scanned: ISA address retrieved from Super I/O registers + + Datasheet: Available from Nuvoton upon request + + * Nuvoton NCT6792D + + Prefix: 'nct6792' + + Addresses scanned: ISA address retrieved from Super I/O registers + + Datasheet: Available from Nuvoton upon request + + * Nuvoton NCT6793D + + Prefix: 'nct6793' + + Addresses scanned: ISA address retrieved from Super I/O registers + + Datasheet: Available from Nuvoton upon request + + * Nuvoton NCT6795D + + Prefix: 'nct6795' + + Addresses scanned: ISA address retrieved from Super I/O registers + + Datasheet: Available from Nuvoton upon request + + * Nuvoton NCT6796D + + Prefix: 'nct6796' + + Addresses scanned: ISA address retrieved from Super I/O registers + + Datasheet: Available from Nuvoton upon request + + + Authors: - Guenter Roeck + + Guenter Roeck Description ----------- @@ -96,10 +134,14 @@ The mode works for fan1-fan5. sysfs attributes ---------------- -pwm[1-7] - this file stores PWM duty cycle or DC value (fan speed) in range: +pwm[1-7] + - this file stores PWM duty cycle or DC value (fan speed) in range: + 0 (lowest speed) to 255 (full) -pwm[1-7]_enable - this file controls mode of fan/temperature control: +pwm[1-7]_enable + - this file controls mode of fan/temperature control: + * 0 Fan control disabled (fans set to maximum speed) * 1 Manual mode, write to pwm[0-5] any value 0-255 * 2 "Thermal Cruise" mode @@ -107,15 +149,19 @@ pwm[1-7]_enable - this file controls mode of fan/temperature control: * 4 "Smart Fan III" mode (NCT6775F only) * 5 "Smart Fan IV" mode -pwm[1-7]_mode - controls if output is PWM or DC level - * 0 DC output - * 1 PWM output +pwm[1-7]_mode + - controls if output is PWM or DC level + + * 0 DC output + * 1 PWM output Common fan control attributes ----------------------------- -pwm[1-7]_temp_sel Temperature source. Value is temperature sensor index. +pwm[1-7]_temp_sel + Temperature source. Value is temperature sensor index. For example, select '1' for temp1_input. + pwm[1-7]_weight_temp_sel Secondary temperature source. Value is temperature sensor index. For example, select '1' for temp1_input. @@ -126,13 +172,16 @@ following attributes. pwm[1-7]_weight_duty_step Duty step size. + pwm[1-7]_weight_temp_step Temperature step size. With each step over temp_step_base, the value of weight_duty_step is added to the current pwm value. + pwm[1-7]_weight_temp_step_base Temperature at which secondary temperature control kicks in. + pwm[1-7]_weight_temp_step_tol Temperature step tolerance. @@ -141,24 +190,35 @@ Thermal Cruise mode (2) If the temperature is in the range defined by: -pwm[1-7]_target_temp Target temperature, unit millidegree Celsius +pwm[1-7]_target_temp + Target temperature, unit millidegree Celsius (range 0 - 127000) + pwm[1-7]_temp_tolerance Target temperature tolerance, unit millidegree Celsius -there are no changes to fan speed. Once the temperature leaves the interval, fan +There are no changes to fan speed. Once the temperature leaves the interval, fan speed increases (if temperature is higher that desired) or decreases (if temperature is lower than desired), using the following limits and time intervals. -pwm[1-7]_start fan pwm start value (range 1 - 255), to start fan +pwm[1-7]_start + fan pwm start value (range 1 - 255), to start fan when the temperature is above defined range. -pwm[1-7]_floor lowest fan pwm (range 0 - 255) if temperature is below + +pwm[1-7]_floor + lowest fan pwm (range 0 - 255) if temperature is below the defined range. If set to 0, the fan is expected to stop if the temperature is below the defined range. -pwm[1-7]_step_up_time milliseconds before fan speed is increased -pwm[1-7]_step_down_time milliseconds before fan speed is decreased -pwm[1-7]_stop_time how many milliseconds must elapse to switch + +pwm[1-7]_step_up_time + milliseconds before fan speed is increased + +pwm[1-7]_step_down_time + milliseconds before fan speed is decreased + +pwm[1-7]_stop_time + how many milliseconds must elapse to switch corresponding fan off (when the temperature was below defined range). @@ -167,7 +227,9 @@ Speed Cruise mode (3) This modes tries to keep the fan speed constant. -fan[1-7]_target Target fan speed +fan[1-7]_target + Target fan speed + fan[1-7]_tolerance Target speed tolerance @@ -188,16 +250,22 @@ critical temperature mode, in which the fans should run at full speed. pwm[1-7]_auto_point[1-7]_pwm pwm value to be set if temperature reaches matching temperature range. + pwm[1-7]_auto_point[1-7]_temp Temperature over which the matching pwm is enabled. + pwm[1-7]_temp_tolerance Temperature tolerance, unit millidegree Celsius + pwm[1-7]_crit_temp_tolerance Temperature tolerance for critical temperature, unit millidegree Celsius -pwm[1-7]_step_up_time milliseconds before fan speed is increased -pwm[1-7]_step_down_time milliseconds before fan speed is decreased +pwm[1-7]_step_up_time + milliseconds before fan speed is increased + +pwm[1-7]_step_down_time + milliseconds before fan speed is decreased Usage Notes ----------- diff --git a/Documentation/hwmon/smm665 b/Documentation/hwmon/smm665 index a341eeedab75..a0e27f62b57b 100644 --- a/Documentation/hwmon/smm665 +++ b/Documentation/hwmon/smm665 @@ -2,31 +2,57 @@ Kernel driver smm665 ==================== Supported chips: + * Summit Microelectronics SMM465 + Prefix: 'smm465' + Addresses scanned: - + Datasheet: + http://www.summitmicro.com/prod_select/summary/SMM465/SMM465DS.pdf + * Summit Microelectronics SMM665, SMM665B + Prefix: 'smm665' + Addresses scanned: - + Datasheet: + http://www.summitmicro.com/prod_select/summary/SMM665/SMM665B_2089_20.pdf + * Summit Microelectronics SMM665C + Prefix: 'smm665c' + Addresses scanned: - + Datasheet: + http://www.summitmicro.com/prod_select/summary/SMM665C/SMM665C_2125.pdf + * Summit Microelectronics SMM764 + Prefix: 'smm764' + Addresses scanned: - + Datasheet: + http://www.summitmicro.com/prod_select/summary/SMM764/SMM764_2098.pdf + * Summit Microelectronics SMM766, SMM766B + Prefix: 'smm766' + Addresses scanned: - + Datasheets: + http://www.summitmicro.com/prod_select/summary/SMM766/SMM766_2086.pdf + http://www.summitmicro.com/prod_select/summary/SMM766B/SMM766B_2122.pdf Author: Guenter Roeck @@ -36,9 +62,10 @@ Module Parameters ----------------- * vref: int - Default: 1250 (mV) - Reference voltage on VREF_ADC pin in mV. It should not be necessary to set - this parameter unless a non-default reference voltage is used. + Default: 1250 (mV) + + Reference voltage on VREF_ADC pin in mV. It should not be necessary to set + this parameter unless a non-default reference voltage is used. Description @@ -64,9 +91,10 @@ the devices explicitly. When instantiating the device, you have to specify its configuration register address. Example: the following will load the driver for an SMM665 at address 0x57 -on I2C bus #1: -$ modprobe smm665 -$ echo smm665 0x57 > /sys/bus/i2c/devices/i2c-1/new_device +on I2C bus #1:: + + $ modprobe smm665 + $ echo smm665 0x57 > /sys/bus/i2c/devices/i2c-1/new_device Sysfs entries @@ -84,6 +112,7 @@ max otherwise. For details please see the SMM665 datasheet. For SMM465 and SMM764, values for Channel E and F are reported but undefined. +======================= ======================================================= in1_input 12V input voltage (mV) in2_input 3.3V (VDD) input voltage (mV) in3_input Channel A voltage (mV) @@ -155,3 +184,4 @@ temp1_min Mimimum chip temperature temp1_max Maximum chip temperature temp1_crit Critical chip temperature temp1_crit_alarm Temperature critical alarm +======================= ======================================================= diff --git a/Documentation/hwmon/tmp401 b/Documentation/hwmon/tmp401 index 2d9ca42213cf..bd865bbdb38d 100644 --- a/Documentation/hwmon/tmp401 +++ b/Documentation/hwmon/tmp401 @@ -2,33 +2,59 @@ Kernel driver tmp401 ==================== Supported chips: + * Texas Instruments TMP401 + Prefix: 'tmp401' + Addresses scanned: I2C 0x4c + Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp401.html + * Texas Instruments TMP411 + Prefix: 'tmp411' + Addresses scanned: I2C 0x4c, 0x4d, 0x4e + Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp411.html + * Texas Instruments TMP431 + Prefix: 'tmp431' + Addresses scanned: I2C 0x4c, 0x4d + Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp431.html + * Texas Instruments TMP432 + Prefix: 'tmp432' + Addresses scanned: I2C 0x4c, 0x4d + Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp432.html + * Texas Instruments TMP435 + Prefix: 'tmp435' + Addresses scanned: I2C 0x48 - 0x4f + Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp435.html + * Texas Instruments TMP461 + Prefix: 'tmp461' + Datasheet: http://www.ti.com/product/tmp461 + + Authors: - Hans de Goede - Andre Prendel + + - Hans de Goede + - Andre Prendel Description ----------- From b04f2f7d387b3160883c2a1f5e2285483a791e82 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 17 Apr 2019 06:46:28 -0300 Subject: [PATCH 115/125] docs: hwmon: convert remaining files to ReST format Convert all other hwmon files to ReST format, in order to allow them to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Guenter Roeck --- Documentation/hwmon/ab8500 | 8 +- Documentation/hwmon/abituguru | 97 +-- Documentation/hwmon/abituguru-datasheet | 158 ++--- Documentation/hwmon/abituguru3 | 36 +- Documentation/hwmon/abx500 | 8 +- Documentation/hwmon/acpi_power_meter | 23 +- Documentation/hwmon/ad7314 | 9 + Documentation/hwmon/adc128d818 | 7 +- Documentation/hwmon/adm1021 | 44 +- Documentation/hwmon/adm1025 | 13 +- Documentation/hwmon/adm1026 | 24 +- Documentation/hwmon/adm1031 | 16 +- Documentation/hwmon/adm9240 | 50 +- Documentation/hwmon/ads7828 | 29 +- Documentation/hwmon/adt7410 | 49 +- Documentation/hwmon/adt7411 | 20 +- Documentation/hwmon/adt7462 | 10 +- Documentation/hwmon/adt7470 | 8 +- Documentation/hwmon/adt7475 | 38 +- Documentation/hwmon/amc6821 | 19 +- Documentation/hwmon/asb100 | 50 +- Documentation/hwmon/ds1621 | 154 +++-- Documentation/hwmon/ds620 | 12 +- Documentation/hwmon/emc1403 | 33 +- Documentation/hwmon/emc6w201 | 5 + Documentation/hwmon/f71805f | 36 +- Documentation/hwmon/f71882fg | 56 +- Documentation/hwmon/ftsteutates | 14 +- Documentation/hwmon/g760a | 4 + Documentation/hwmon/g762 | 49 +- Documentation/hwmon/gl518sm | 21 +- Documentation/hwmon/hih6130 | 14 +- Documentation/hwmon/hwmon-kernel-api.txt | 314 +++++----- Documentation/hwmon/ibmaem | 10 +- Documentation/hwmon/ina3221 | 21 +- Documentation/hwmon/it87 | 102 +++- Documentation/hwmon/lineage-pem | 16 +- Documentation/hwmon/lm63 | 24 +- Documentation/hwmon/lm70 | 13 +- Documentation/hwmon/lm73 | 16 +- Documentation/hwmon/lm75 | 96 ++- Documentation/hwmon/lm77 | 9 +- Documentation/hwmon/lm78 | 36 +- Documentation/hwmon/lm80 | 19 +- Documentation/hwmon/lm83 | 30 +- Documentation/hwmon/lm85 | 97 ++- Documentation/hwmon/lm87 | 23 +- Documentation/hwmon/lm90 | 374 ++++++++---- Documentation/hwmon/lm92 | 17 +- Documentation/hwmon/lm93 | 157 ++--- Documentation/hwmon/lm95245 | 25 +- Documentation/hwmon/ltc2945 | 16 +- Documentation/hwmon/ltc2990 | 23 +- Documentation/hwmon/ltc4151 | 16 +- Documentation/hwmon/ltc4215 | 16 +- Documentation/hwmon/ltc4245 | 17 +- Documentation/hwmon/ltc4260 | 16 +- Documentation/hwmon/max1619 | 11 +- Documentation/hwmon/max1668 | 14 +- Documentation/hwmon/max197 | 36 +- Documentation/hwmon/max31722 | 12 + Documentation/hwmon/max31790 | 6 + Documentation/hwmon/max6639 | 16 +- Documentation/hwmon/max6642 | 10 +- Documentation/hwmon/max6650 | 16 +- Documentation/hwmon/mc13783-adc | 27 +- Documentation/hwmon/mcp3021 | 15 +- Documentation/hwmon/mlxreg-fan | 60 +- Documentation/hwmon/nct6683 | 11 +- Documentation/hwmon/nct7802 | 11 +- Documentation/hwmon/nct7904 | 9 +- Documentation/hwmon/npcm750-pwm-fan | 4 + Documentation/hwmon/nsa320 | 15 +- Documentation/hwmon/ntc_thermistor | 109 ++-- Documentation/hwmon/occ | 93 ++- Documentation/hwmon/pc87427 | 4 + Documentation/hwmon/pcf8591 | 52 +- Documentation/hwmon/powr1220 | 12 +- Documentation/hwmon/raspberrypi-hwmon | 3 + Documentation/hwmon/sch5636 | 3 + Documentation/hwmon/scpi-hwmon | 7 +- Documentation/hwmon/sht15 | 28 +- Documentation/hwmon/sht21 | 24 +- Documentation/hwmon/sht3x | 42 +- Documentation/hwmon/shtc1 | 19 +- Documentation/hwmon/sis5595 | 40 +- Documentation/hwmon/smsc47b397 | 160 +++-- Documentation/hwmon/smsc47m1 | 43 +- Documentation/hwmon/smsc47m192 | 105 ++-- Documentation/hwmon/submitting-patches | 15 +- Documentation/hwmon/sysfs-interface | 727 +++++++++++++++-------- Documentation/hwmon/tc654 | 9 +- Documentation/hwmon/tc74 | 3 + Documentation/hwmon/thmc50 | 36 +- Documentation/hwmon/tmp102 | 5 + Documentation/hwmon/tmp103 | 5 + Documentation/hwmon/tmp108 | 5 + Documentation/hwmon/tmp421 | 26 +- Documentation/hwmon/twl4030-madc-hwmon | 8 +- Documentation/hwmon/userspace-tools | 3 + Documentation/hwmon/via686a | 30 +- Documentation/hwmon/w83627ehf | 176 ++++-- Documentation/hwmon/w83627hf | 63 +- Documentation/hwmon/w83773g | 12 +- Documentation/hwmon/w83781d | 330 +++++----- Documentation/hwmon/w83792d | 112 ++-- Documentation/hwmon/w83795 | 221 +++---- Documentation/hwmon/w83l785ts | 9 +- Documentation/hwmon/w83l786ng | 42 +- Documentation/hwmon/xgene-hwmon | 24 +- 110 files changed, 3650 insertions(+), 1845 deletions(-) diff --git a/Documentation/hwmon/ab8500 b/Documentation/hwmon/ab8500 index cf169c8ef4e3..d87c61151239 100644 --- a/Documentation/hwmon/ab8500 +++ b/Documentation/hwmon/ab8500 @@ -2,14 +2,18 @@ Kernel driver ab8500 ==================== Supported chips: + * ST-Ericsson AB8500 + Prefix: 'ab8500' + Addresses scanned: - + Datasheet: http://www.stericsson.com/developers/documentation.jsp Authors: - Martin Persson - Hongbo Zhang + - Martin Persson + - Hongbo Zhang Description ----------- diff --git a/Documentation/hwmon/abituguru b/Documentation/hwmon/abituguru index 44013d23b3f0..d8243c827de9 100644 --- a/Documentation/hwmon/abituguru +++ b/Documentation/hwmon/abituguru @@ -2,69 +2,85 @@ Kernel driver abituguru ======================= Supported chips: + * Abit uGuru revision 1 & 2 (Hardware Monitor part only) + Prefix: 'abituguru' + Addresses scanned: ISA 0x0E0 + Datasheet: Not available, this driver is based on reverse engineering. - A "Datasheet" has been written based on the reverse engineering it - should be available in the same dir as this file under the name - abituguru-datasheet. + A "Datasheet" has been written based on the reverse engineering it + should be available in the same dir as this file under the name + abituguru-datasheet. + Note: The uGuru is a microcontroller with onboard firmware which programs it to behave as a hwmon IC. There are many different revisions of the firmware and thus effectivly many different revisions of the uGuru. Below is an incomplete list with which revisions are used for which Motherboards: - uGuru 1.00 ~ 1.24 (AI7, KV8-MAX3, AN7) (1) - uGuru 2.0.0.0 ~ 2.0.4.2 (KV8-PRO) - uGuru 2.1.0.0 ~ 2.1.2.8 (AS8, AV8, AA8, AG8, AA8XE, AX8) - uGuru 2.2.0.0 ~ 2.2.0.6 (AA8 Fatal1ty) - uGuru 2.3.0.0 ~ 2.3.0.9 (AN8) - uGuru 3.0.0.0 ~ 3.0.x.x (AW8, AL8, AT8, NI8 SLI, AT8 32X, AN8 32X, - AW9D-MAX) (2) - 1) For revisions 2 and 3 uGuru's the driver can autodetect the - sensortype (Volt or Temp) for bank1 sensors, for revision 1 uGuru's - this does not always work. For these uGuru's the autodetection can - be overridden with the bank1_types module param. For all 3 known - revison 1 motherboards the correct use of this param is: - bank1_types=1,1,0,0,0,0,0,2,0,0,0,0,2,0,0,1 - You may also need to specify the fan_sensors option for these boards - fan_sensors=5 - 2) There is a separate abituguru3 driver for these motherboards, - the abituguru (without the 3 !) driver will not work on these - motherboards (and visa versa)! + + - uGuru 1.00 ~ 1.24 (AI7, KV8-MAX3, AN7) [1]_ + - uGuru 2.0.0.0 ~ 2.0.4.2 (KV8-PRO) + - uGuru 2.1.0.0 ~ 2.1.2.8 (AS8, AV8, AA8, AG8, AA8XE, AX8) + - uGuru 2.2.0.0 ~ 2.2.0.6 (AA8 Fatal1ty) + - uGuru 2.3.0.0 ~ 2.3.0.9 (AN8) + - uGuru 3.0.0.0 ~ 3.0.x.x (AW8, AL8, AT8, NI8 SLI, AT8 32X, AN8 32X, + AW9D-MAX) [2]_ + +.. [1] For revisions 2 and 3 uGuru's the driver can autodetect the + sensortype (Volt or Temp) for bank1 sensors, for revision 1 uGuru's + this does not always work. For these uGuru's the autodetection can + be overridden with the bank1_types module param. For all 3 known + revison 1 motherboards the correct use of this param is: + bank1_types=1,1,0,0,0,0,0,2,0,0,0,0,2,0,0,1 + You may also need to specify the fan_sensors option for these boards + fan_sensors=5 + +.. [2] There is a separate abituguru3 driver for these motherboards, + the abituguru (without the 3 !) driver will not work on these + motherboards (and visa versa)! Authors: - Hans de Goede , - (Initial reverse engineering done by Olle Sandberg - ) + - Hans de Goede , + - (Initial reverse engineering done by Olle Sandberg + ) Module Parameters ----------------- -* force: bool Force detection. Note this parameter only causes the +* force: bool + Force detection. Note this parameter only causes the detection to be skipped, and thus the insmod to succeed. If the uGuru can't be read the actual hwmon driver will not load and thus no hwmon device will get registered. -* bank1_types: int[] Bank1 sensortype autodetection override: - -1 autodetect (default) - 0 volt sensor - 1 temp sensor - 2 not connected -* fan_sensors: int Tell the driver how many fan speed sensors there are +* bank1_types: int[] + Bank1 sensortype autodetection override: + + * -1 autodetect (default) + * 0 volt sensor + * 1 temp sensor + * 2 not connected +* fan_sensors: int + Tell the driver how many fan speed sensors there are on your motherboard. Default: 0 (autodetect). -* pwms: int Tell the driver how many fan speed controls (fan +* pwms: int + Tell the driver how many fan speed controls (fan pwms) your motherboard has. Default: 0 (autodetect). -* verbose: int How verbose should the driver be? (0-3): - 0 normal output - 1 + verbose error reporting - 2 + sensors type probing info (default) - 3 + retryable error reporting +* verbose: int + How verbose should the driver be? (0-3): + + * 0 normal output + * 1 + verbose error reporting + * 2 + sensors type probing info (default) + * 3 + retryable error reporting + Default: 2 (the driver is still in the testing phase) -Notice if you need any of the first three options above please insmod the +Notice: if you need any of the first three options above please insmod the driver with verbose set to 3 and mail me the output of: dmesg | grep abituguru @@ -90,3 +106,8 @@ Known Issues ------------ The voltage and frequency control parts of the Abit uGuru are not supported. + +.. toctree:: + :maxdepth: 1 + + abituguru-datasheet.rst diff --git a/Documentation/hwmon/abituguru-datasheet b/Documentation/hwmon/abituguru-datasheet index 86c0b1251c81..6d5253e2223b 100644 --- a/Documentation/hwmon/abituguru-datasheet +++ b/Documentation/hwmon/abituguru-datasheet @@ -1,3 +1,4 @@ +=============== uGuru datasheet =============== @@ -168,34 +169,35 @@ This bank contains 0 sensors, iow the sensor address is ignored (but must be written) just use 0. Bank 0x20 contains 3 bytes: Byte 0: -This byte holds the alarm flags for sensor 0-7 of Sensor Bank1, with bit 0 -corresponding to sensor 0, 1 to 1, etc. + This byte holds the alarm flags for sensor 0-7 of Sensor Bank1, with bit 0 + corresponding to sensor 0, 1 to 1, etc. Byte 1: -This byte holds the alarm flags for sensor 8-15 of Sensor Bank1, with bit 0 -corresponding to sensor 8, 1 to 9, etc. + This byte holds the alarm flags for sensor 8-15 of Sensor Bank1, with bit 0 + corresponding to sensor 8, 1 to 9, etc. Byte 2: -This byte holds the alarm flags for sensor 0-5 of Sensor Bank2, with bit 0 -corresponding to sensor 0, 1 to 1, etc. + This byte holds the alarm flags for sensor 0-5 of Sensor Bank2, with bit 0 + corresponding to sensor 0, 1 to 1, etc. Bank 0x21 Sensor Bank1 Values / Readings (R) -------------------------------------------- This bank contains 16 sensors, for each sensor it contains 1 byte. So far the following sensors are known to be available on all motherboards: -Sensor 0 CPU temp -Sensor 1 SYS temp -Sensor 3 CPU core volt -Sensor 4 DDR volt -Sensor 10 DDR Vtt volt -Sensor 15 PWM temp + +- Sensor 0 CPU temp +- Sensor 1 SYS temp +- Sensor 3 CPU core volt +- Sensor 4 DDR volt +- Sensor 10 DDR Vtt volt +- Sensor 15 PWM temp Byte 0: -This byte holds the reading from the sensor. Sensors in Bank1 can be both -volt and temp sensors, this is motherboard specific. The uGuru however does -seem to know (be programmed with) what kindoff sensor is attached see Sensor -Bank1 Settings description. + This byte holds the reading from the sensor. Sensors in Bank1 can be both + volt and temp sensors, this is motherboard specific. The uGuru however does + seem to know (be programmed with) what kindoff sensor is attached see Sensor + Bank1 Settings description. Volt sensors use a linear scale, a reading 0 corresponds with 0 volt and a reading of 255 with 3494 mV. The sensors for higher voltages however are @@ -207,96 +209,118 @@ Temp sensors also use a linear scale, a reading of 0 corresponds with 0 degree Celsius and a reading of 255 with a reading of 255 degrees Celsius. -Bank 0x22 Sensor Bank1 Settings (R) -Bank 0x23 Sensor Bank1 Settings (W) ------------------------------------ +Bank 0x22 Sensor Bank1 Settings (R) and Bank 0x23 Sensor Bank1 Settings (W) +--------------------------------------------------------------------------- -This bank contains 16 sensors, for each sensor it contains 3 bytes. Each +Those banks contain 16 sensors, for each sensor it contains 3 bytes. Each set of 3 bytes contains the settings for the sensor with the same sensor address in Bank 0x21 . Byte 0: -Alarm behaviour for the selected sensor. A 1 enables the described behaviour. -Bit 0: Give an alarm if measured temp is over the warning threshold (RW) * -Bit 1: Give an alarm if measured volt is over the max threshold (RW) ** -Bit 2: Give an alarm if measured volt is under the min threshold (RW) ** -Bit 3: Beep if alarm (RW) -Bit 4: 1 if alarm cause measured temp is over the warning threshold (R) -Bit 5: 1 if alarm cause measured volt is over the max threshold (R) -Bit 6: 1 if alarm cause measured volt is under the min threshold (R) -Bit 7: Volt sensor: Shutdown if alarm persist for more than 4 seconds (RW) - Temp sensor: Shutdown if temp is over the shutdown threshold (RW) + Alarm behaviour for the selected sensor. A 1 enables the described + behaviour. -* This bit is only honored/used by the uGuru if a temp sensor is connected -** This bit is only honored/used by the uGuru if a volt sensor is connected -Note with some trickery this can be used to find out what kinda sensor is -detected see the Linux kernel driver for an example with many comments on -how todo this. +Bit 0: + Give an alarm if measured temp is over the warning threshold (RW) [1]_ + +Bit 1: + Give an alarm if measured volt is over the max threshold (RW) [2]_ + +Bit 2: + Give an alarm if measured volt is under the min threshold (RW) [2]_ + +Bit 3: + Beep if alarm (RW) + +Bit 4: + 1 if alarm cause measured temp is over the warning threshold (R) + +Bit 5: + 1 if alarm cause measured volt is over the max threshold (R) + +Bit 6: + 1 if alarm cause measured volt is under the min threshold (R) + +Bit 7: + - Volt sensor: Shutdown if alarm persist for more than 4 seconds (RW) + - Temp sensor: Shutdown if temp is over the shutdown threshold (RW) + +.. [1] This bit is only honored/used by the uGuru if a temp sensor is connected + +.. [2] This bit is only honored/used by the uGuru if a volt sensor is connected + Note with some trickery this can be used to find out what kinda sensor + is detected see the Linux kernel driver for an example with many + comments on how todo this. Byte 1: -Temp sensor: warning threshold (scale as bank 0x21) -Volt sensor: min threshold (scale as bank 0x21) + - Temp sensor: warning threshold (scale as bank 0x21) + - Volt sensor: min threshold (scale as bank 0x21) Byte 2: -Temp sensor: shutdown threshold (scale as bank 0x21) -Volt sensor: max threshold (scale as bank 0x21) + - Temp sensor: shutdown threshold (scale as bank 0x21) + - Volt sensor: max threshold (scale as bank 0x21) -Bank 0x24 PWM outputs for FAN's (R) -Bank 0x25 PWM outputs for FAN's (W) ------------------------------------ +Bank 0x24 PWM outputs for FAN's (R) and Bank 0x25 PWM outputs for FAN's (W) +--------------------------------------------------------------------------- -This bank contains 3 "sensors", for each sensor it contains 5 bytes. -Sensor 0 usually controls the CPU fan -Sensor 1 usually controls the NB (or chipset for single chip) fan -Sensor 2 usually controls the System fan +Those banks contain 3 "sensors", for each sensor it contains 5 bytes. + - Sensor 0 usually controls the CPU fan + - Sensor 1 usually controls the NB (or chipset for single chip) fan + - Sensor 2 usually controls the System fan Byte 0: -Flag 0x80 to enable control, Fan runs at 100% when disabled. -low nibble (temp)sensor address at bank 0x21 used for control. + Flag 0x80 to enable control, Fan runs at 100% when disabled. + low nibble (temp)sensor address at bank 0x21 used for control. Byte 1: -0-255 = 0-12v (linear), specify voltage at which fan will rotate when under -low threshold temp (specified in byte 3) + 0-255 = 0-12v (linear), specify voltage at which fan will rotate when under + low threshold temp (specified in byte 3) Byte 2: -0-255 = 0-12v (linear), specify voltage at which fan will rotate when above -high threshold temp (specified in byte 4) + 0-255 = 0-12v (linear), specify voltage at which fan will rotate when above + high threshold temp (specified in byte 4) Byte 3: -Low threshold temp (scale as bank 0x21) + Low threshold temp (scale as bank 0x21) byte 4: -High threshold temp (scale as bank 0x21) + High threshold temp (scale as bank 0x21) Bank 0x26 Sensors Bank2 Values / Readings (R) --------------------------------------------- This bank contains 6 sensors (AFAIK), for each sensor it contains 1 byte. + So far the following sensors are known to be available on all motherboards: -Sensor 0: CPU fan speed -Sensor 1: NB (or chipset for single chip) fan speed -Sensor 2: SYS fan speed + - Sensor 0: CPU fan speed + - Sensor 1: NB (or chipset for single chip) fan speed + - Sensor 2: SYS fan speed Byte 0: -This byte holds the reading from the sensor. 0-255 = 0-15300 (linear) + This byte holds the reading from the sensor. 0-255 = 0-15300 (linear) -Bank 0x27 Sensors Bank2 Settings (R) -Bank 0x28 Sensors Bank2 Settings (W) ------------------------------------- +Bank 0x27 Sensors Bank2 Settings (R) and Bank 0x28 Sensors Bank2 Settings (W) +----------------------------------------------------------------------------- -This bank contains 6 sensors (AFAIK), for each sensor it contains 2 bytes. +Those banks contain 6 sensors (AFAIK), for each sensor it contains 2 bytes. Byte 0: -Alarm behaviour for the selected sensor. A 1 enables the described behaviour. -Bit 0: Give an alarm if measured rpm is under the min threshold (RW) -Bit 3: Beep if alarm (RW) -Bit 7: Shutdown if alarm persist for more than 4 seconds (RW) + Alarm behaviour for the selected sensor. A 1 enables the described behaviour. + +Bit 0: + Give an alarm if measured rpm is under the min threshold (RW) + +Bit 3: + Beep if alarm (RW) + +Bit 7: + Shutdown if alarm persist for more than 4 seconds (RW) Byte 1: -min threshold (scale as bank 0x26) + min threshold (scale as bank 0x26) Warning for the adventurous diff --git a/Documentation/hwmon/abituguru3 b/Documentation/hwmon/abituguru3 index a6ccfe4bb6aa..514f11f41e8b 100644 --- a/Documentation/hwmon/abituguru3 +++ b/Documentation/hwmon/abituguru3 @@ -3,41 +3,51 @@ Kernel driver abituguru3 Supported chips: * Abit uGuru revision 3 (Hardware Monitor part, reading only) + Prefix: 'abituguru3' + Addresses scanned: ISA 0x0E0 + Datasheet: Not available, this driver is based on reverse engineering. + Note: The uGuru is a microcontroller with onboard firmware which programs it to behave as a hwmon IC. There are many different revisions of the firmware and thus effectivly many different revisions of the uGuru. Below is an incomplete list with which revisions are used for which Motherboards: - uGuru 1.00 ~ 1.24 (AI7, KV8-MAX3, AN7) - uGuru 2.0.0.0 ~ 2.0.4.2 (KV8-PRO) - uGuru 2.1.0.0 ~ 2.1.2.8 (AS8, AV8, AA8, AG8, AA8XE, AX8) - uGuru 2.3.0.0 ~ 2.3.0.9 (AN8) - uGuru 3.0.0.0 ~ 3.0.x.x (AW8, AL8, AT8, NI8 SLI, AT8 32X, AN8 32X, - AW9D-MAX) + + - uGuru 1.00 ~ 1.24 (AI7, KV8-MAX3, AN7) + - uGuru 2.0.0.0 ~ 2.0.4.2 (KV8-PRO) + - uGuru 2.1.0.0 ~ 2.1.2.8 (AS8, AV8, AA8, AG8, AA8XE, AX8) + - uGuru 2.3.0.0 ~ 2.3.0.9 (AN8) + - uGuru 3.0.0.0 ~ 3.0.x.x (AW8, AL8, AT8, NI8 SLI, AT8 32X, AN8 32X, + AW9D-MAX) + The abituguru3 driver is only for revison 3.0.x.x motherboards, this driver will not work on older motherboards. For older motherboards use the abituguru (without the 3 !) driver. Authors: - Hans de Goede , - (Initial reverse engineering done by Louis Kruger) + - Hans de Goede , + - (Initial reverse engineering done by Louis Kruger) Module Parameters ----------------- -* force: bool Force detection. Note this parameter only causes the +* force: bool + Force detection. Note this parameter only causes the detection to be skipped, and thus the insmod to succeed. If the uGuru can't be read the actual hwmon driver will not load and thus no hwmon device will get registered. -* verbose: bool Should the driver be verbose? - 0/off/false normal output - 1/on/true + verbose error reporting (default) +* verbose: bool + Should the driver be verbose? + + * 0/off/false normal output + * 1/on/true + verbose error reporting (default) + Default: 1 (the driver is still in the testing phase) Description @@ -62,4 +72,4 @@ neither is writing any of the sensor settings and writing / reading the fanspeed control registers (FanEQ) If you encounter any problems please mail me and -include the output of: "dmesg | grep abituguru" +include the output of: `dmesg | grep abituguru` diff --git a/Documentation/hwmon/abx500 b/Documentation/hwmon/abx500 index 319a058cec7c..3d88b2ce0f00 100644 --- a/Documentation/hwmon/abx500 +++ b/Documentation/hwmon/abx500 @@ -2,14 +2,18 @@ Kernel driver abx500 ==================== Supported chips: + * ST-Ericsson ABx500 series + Prefix: 'abx500' + Addresses scanned: - + Datasheet: http://www.stericsson.com/developers/documentation.jsp Authors: - Martin Persson - Hongbo Zhang + Martin Persson + Hongbo Zhang Description ----------- diff --git a/Documentation/hwmon/acpi_power_meter b/Documentation/hwmon/acpi_power_meter index c80399a00c50..7665ca6ba957 100644 --- a/Documentation/hwmon/acpi_power_meter +++ b/Documentation/hwmon/acpi_power_meter @@ -4,8 +4,11 @@ Kernel driver power_meter This driver talks to ACPI 4.0 power meters. Supported systems: + * Any recent system with ACPI 4.0. + Prefix: 'power_meter' + Datasheet: http://acpi.info/, section 10.4. Author: Darrick J. Wong @@ -23,21 +26,21 @@ of Documentation/hwmon/sysfs-interface. Special Features ---------------- -The power[1-*]_is_battery knob indicates if the power supply is a battery. -Both power[1-*]_average_{min,max} must be set before the trip points will work. +The `power[1-*]_is_battery` knob indicates if the power supply is a battery. +Both `power[1-*]_average_{min,max}` must be set before the trip points will work. When both of them are set, an ACPI event will be broadcast on the ACPI netlink socket and a poll notification will be sent to the appropriate -power[1-*]_average sysfs file. +`power[1-*]_average` sysfs file. -The power[1-*]_{model_number, serial_number, oem_info} fields display arbitrary -strings that ACPI provides with the meter. The measures/ directory contains -symlinks to the devices that this meter measures. +The `power[1-*]_{model_number, serial_number, oem_info}` fields display +arbitrary strings that ACPI provides with the meter. The measures/ directory +contains symlinks to the devices that this meter measures. Some computers have the ability to enforce a power cap in hardware. If this is -the case, the power[1-*]_cap and related sysfs files will appear. When the +the case, the `power[1-*]_cap` and related sysfs files will appear. When the average power consumption exceeds the cap, an ACPI event will be broadcast on the netlink event socket and a poll notification will be sent to the -appropriate power[1-*]_alarm file to indicate that capping has begun, and the +appropriate `power[1-*]_alarm` file to indicate that capping has begun, and the hardware has taken action to reduce power consumption. Most likely this will result in reduced performance. @@ -46,6 +49,6 @@ all cases the ACPI event will be broadcast on the ACPI netlink event socket as well as sent as a poll notification to a sysfs file. The events are as follows: -power[1-*]_cap will be notified if the firmware changes the power cap. -power[1-*]_interval will be notified if the firmware changes the averaging +`power[1-*]_cap` will be notified if the firmware changes the power cap. +`power[1-*]_interval` will be notified if the firmware changes the averaging interval. diff --git a/Documentation/hwmon/ad7314 b/Documentation/hwmon/ad7314 index 1912549c7467..bf389736bcd1 100644 --- a/Documentation/hwmon/ad7314 +++ b/Documentation/hwmon/ad7314 @@ -2,14 +2,23 @@ Kernel driver ad7314 ==================== Supported chips: + * Analog Devices AD7314 + Prefix: 'ad7314' + Datasheet: Publicly available at Analog Devices website. + * Analog Devices ADT7301 + Prefix: 'adt7301' + Datasheet: Publicly available at Analog Devices website. + * Analog Devices ADT7302 + Prefix: 'adt7302' + Datasheet: Publicly available at Analog Devices website. Description diff --git a/Documentation/hwmon/adc128d818 b/Documentation/hwmon/adc128d818 index 39c95004dabc..6753468932ab 100644 --- a/Documentation/hwmon/adc128d818 +++ b/Documentation/hwmon/adc128d818 @@ -2,11 +2,14 @@ Kernel driver adc128d818 ======================== Supported chips: + * Texas Instruments ADC818D818 + Prefix: 'adc818d818' + Addresses scanned: I2C 0x1d, 0x1e, 0x1f, 0x2d, 0x2e, 0x2f - Datasheet: Publicly available at the TI website - http://www.ti.com/ + + Datasheet: Publicly available at the TI website http://www.ti.com/ Author: Guenter Roeck diff --git a/Documentation/hwmon/adm1021 b/Documentation/hwmon/adm1021 index 02ad96cf9b2b..6cbb0f75fe00 100644 --- a/Documentation/hwmon/adm1021 +++ b/Documentation/hwmon/adm1021 @@ -2,51 +2,91 @@ Kernel driver adm1021 ===================== Supported chips: + * Analog Devices ADM1021 + Prefix: 'adm1021' + Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e + Datasheet: Publicly available at the Analog Devices website + * Analog Devices ADM1021A/ADM1023 + Prefix: 'adm1023' + Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e + Datasheet: Publicly available at the Analog Devices website + * Genesys Logic GL523SM + Prefix: 'gl523sm' + Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e + Datasheet: + * Maxim MAX1617 + Prefix: 'max1617' + Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e + Datasheet: Publicly available at the Maxim website + * Maxim MAX1617A + Prefix: 'max1617a' + Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e + Datasheet: Publicly available at the Maxim website + * National Semiconductor LM84 + Prefix: 'lm84' + Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e + Datasheet: Publicly available at the National Semiconductor website + * Philips NE1617 + Prefix: 'max1617' (probably detected as a max1617) + Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e + Datasheet: Publicly available at the Philips website + * Philips NE1617A + Prefix: 'max1617' (probably detected as a max1617) + Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e + Datasheet: Publicly available at the Philips website + * TI THMC10 + Prefix: 'thmc10' + Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e + Datasheet: Publicly available at the TI website + * Onsemi MC1066 + Prefix: 'mc1066' + Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e + Datasheet: Publicly available at the Onsemi website Authors: - Frodo Looijaard , - Philip Edelbrock + - Frodo Looijaard , + - Philip Edelbrock Module Parameters ----------------- diff --git a/Documentation/hwmon/adm1025 b/Documentation/hwmon/adm1025 index 99f05049c68a..283e65e348a5 100644 --- a/Documentation/hwmon/adm1025 +++ b/Documentation/hwmon/adm1025 @@ -2,23 +2,32 @@ Kernel driver adm1025 ===================== Supported chips: + * Analog Devices ADM1025, ADM1025A + Prefix: 'adm1025' + Addresses scanned: I2C 0x2c - 0x2e + Datasheet: Publicly available at the Analog Devices website + * Philips NE1619 + Prefix: 'ne1619' + Addresses scanned: I2C 0x2c - 0x2d + Datasheet: Publicly available at the Philips website The NE1619 presents some differences with the original ADM1025: + * Only two possible addresses (0x2c - 0x2d). * No temperature offset register, but we don't use it anyway. * No INT mode for pin 16. We don't play with it anyway. Authors: - Chen-Yuan Wu , - Jean Delvare + - Chen-Yuan Wu , + - Jean Delvare Description ----------- diff --git a/Documentation/hwmon/adm1026 b/Documentation/hwmon/adm1026 index d8fabe0c23ac..35d63e6498a3 100644 --- a/Documentation/hwmon/adm1026 +++ b/Documentation/hwmon/adm1026 @@ -3,28 +3,36 @@ Kernel driver adm1026 Supported chips: * Analog Devices ADM1026 + Prefix: 'adm1026' + Addresses scanned: I2C 0x2c, 0x2d, 0x2e + Datasheet: Publicly available at the Analog Devices website - http://www.onsemi.com/PowerSolutions/product.do?id=ADM1026 + + http://www.onsemi.com/PowerSolutions/product.do?id=ADM1026 Authors: - Philip Pokorny for Penguin Computing - Justin Thiessen + - Philip Pokorny for Penguin Computing + - Justin Thiessen Module Parameters ----------------- * gpio_input: int array (min = 1, max = 17) - List of GPIO pins (0-16) to program as inputs + List of GPIO pins (0-16) to program as inputs + * gpio_output: int array (min = 1, max = 17) - List of GPIO pins (0-16) to program as outputs + List of GPIO pins (0-16) to program as outputs + * gpio_inverted: int array (min = 1, max = 17) - List of GPIO pins (0-16) to program as inverted + List of GPIO pins (0-16) to program as inverted + * gpio_normal: int array (min = 1, max = 17) - List of GPIO pins (0-16) to program as normal/non-inverted + List of GPIO pins (0-16) to program as normal/non-inverted + * gpio_fan: int array (min = 1, max = 8) - List of GPIO pins (0-7) to program as fan tachs + List of GPIO pins (0-7) to program as fan tachs Description diff --git a/Documentation/hwmon/adm1031 b/Documentation/hwmon/adm1031 index a143117c99cb..a677c3ab5574 100644 --- a/Documentation/hwmon/adm1031 +++ b/Documentation/hwmon/adm1031 @@ -3,20 +3,28 @@ Kernel driver adm1031 Supported chips: * Analog Devices ADM1030 + Prefix: 'adm1030' + Addresses scanned: I2C 0x2c to 0x2e + Datasheet: Publicly available at the Analog Devices website - http://www.analog.com/en/prod/0%2C2877%2CADM1030%2C00.html + + http://www.analog.com/en/prod/0%2C2877%2CADM1030%2C00.html * Analog Devices ADM1031 + Prefix: 'adm1031' + Addresses scanned: I2C 0x2c to 0x2e + Datasheet: Publicly available at the Analog Devices website - http://www.analog.com/en/prod/0%2C2877%2CADM1031%2C00.html + + http://www.analog.com/en/prod/0%2C2877%2CADM1031%2C00.html Authors: - Alexandre d'Alton - Jean Delvare + - Alexandre d'Alton + - Jean Delvare Description ----------- diff --git a/Documentation/hwmon/adm9240 b/Documentation/hwmon/adm9240 index 9b174fc700cc..91063b0f4c6f 100644 --- a/Documentation/hwmon/adm9240 +++ b/Documentation/hwmon/adm9240 @@ -2,30 +2,43 @@ Kernel driver adm9240 ===================== Supported chips: + * Analog Devices ADM9240 + Prefix: 'adm9240' + Addresses scanned: I2C 0x2c - 0x2f + Datasheet: Publicly available at the Analog Devices website - http://www.analog.com/UploadedFiles/Data_Sheets/79857778ADM9240_0.pdf + + http://www.analog.com/UploadedFiles/Data_Sheets/79857778ADM9240_0.pdf * Dallas Semiconductor DS1780 + Prefix: 'ds1780' + Addresses scanned: I2C 0x2c - 0x2f + Datasheet: Publicly available at the Dallas Semiconductor (Maxim) website - http://pdfserv.maxim-ic.com/en/ds/DS1780.pdf + + http://pdfserv.maxim-ic.com/en/ds/DS1780.pdf * National Semiconductor LM81 + Prefix: 'lm81' + Addresses scanned: I2C 0x2c - 0x2f + Datasheet: Publicly available at the National Semiconductor website - http://www.national.com/ds.cgi/LM/LM81.pdf + + http://www.national.com/ds.cgi/LM/LM81.pdf Authors: - Frodo Looijaard , - Philip Edelbrock , - Michiel Rook , - Grant Coady with guidance - from Jean Delvare + - Frodo Looijaard , + - Philip Edelbrock , + - Michiel Rook , + - Grant Coady with guidance + from Jean Delvare Interface --------- @@ -87,11 +100,13 @@ rpm = (22500 * 60) / (count * divider) Automatic fan clock divider * User sets 0 to fan_min limit + - low speed alarm is disabled - fan clock divider not changed - auto fan clock adjuster enabled for valid fan speed reading * User sets fan_min limit too low + - low speed alarm is enabled - fan clock divider set to max - fan_min set to register value 254 which corresponds @@ -101,18 +116,20 @@ Automatic fan clock divider - auto fan clock adjuster disabled * User sets reasonable fan speed + - low speed alarm is enabled - fan clock divider set to suit fan_min - auto fan clock adjuster enabled: adjusts fan_min * User sets unreasonably high low fan speed limit + - resolution of the low speed limit may be reduced - alarm will be asserted - auto fan clock adjuster enabled: adjusts fan_min - * fan speed may be displayed as zero until the auto fan clock divider - adjuster brings fan speed clock divider back into chip measurement - range, this will occur within a few measurement cycles. + * fan speed may be displayed as zero until the auto fan clock divider + adjuster brings fan speed clock divider back into chip measurement + range, this will occur within a few measurement cycles. Analog Output ------------- @@ -122,16 +139,21 @@ power up or reset. This doesn't do much on the test Intel SE440BX-2. Voltage Monitor +^^^^^^^^^^^^^^^ + Voltage (IN) measurement is internally scaled: + === =========== =========== ========= ========== nr label nominal maximum resolution - mV mV mV + mV mV mV + === =========== =========== ========= ========== 0 +2.5V 2500 3320 13.0 1 Vccp1 2700 3600 14.1 2 +3.3V 3300 4380 17.2 3 +5V 5000 6640 26.0 4 +12V 12000 15940 62.5 5 Vccp2 2700 3600 14.1 + === =========== =========== ========= ========== The reading is an unsigned 8-bit value, nominal voltage measurement is represented by a reading of 192, being 3/4 of the measurement range. @@ -159,8 +181,9 @@ Clear the CI latch by writing value 0 to the sysfs intrusion0_alarm file. Alarm flags reported as 16-bit word + === ============= ========================== bit label comment - --- ------------- -------------------------- + === ============= ========================== 0 +2.5 V_Error high or low limit exceeded 1 VCCP_Error high or low limit exceeded 2 +3.3 V_Error high or low limit exceeded @@ -171,6 +194,7 @@ Alarm flags reported as 16-bit word 8 +12 V_Error high or low limit exceeded 9 VCCP2_Error high or low limit exceeded 12 Chassis_Error CI pin went high + === ============= ========================== Remaining bits are reserved and thus undefined. It is important to note that alarm bits may be cleared on read, user-space may latch alarms and diff --git a/Documentation/hwmon/ads7828 b/Documentation/hwmon/ads7828 index f6e263e0f607..b830b490cfe4 100644 --- a/Documentation/hwmon/ads7828 +++ b/Documentation/hwmon/ads7828 @@ -2,20 +2,27 @@ Kernel driver ads7828 ===================== Supported chips: + * Texas Instruments/Burr-Brown ADS7828 + Prefix: 'ads7828' + Datasheet: Publicly available at the Texas Instruments website: - http://focus.ti.com/lit/ds/symlink/ads7828.pdf + + http://focus.ti.com/lit/ds/symlink/ads7828.pdf * Texas Instruments ADS7830 + Prefix: 'ads7830' + Datasheet: Publicly available at the Texas Instruments website: - http://focus.ti.com/lit/ds/symlink/ads7830.pdf + + http://focus.ti.com/lit/ds/symlink/ads7830.pdf Authors: - Steve Hardy - Vivien Didelot - Guillaume Roguez + - Steve Hardy + - Vivien Didelot + - Guillaume Roguez Platform data ------------- @@ -24,16 +31,16 @@ The ads7828 driver accepts an optional ads7828_platform_data structure (defined in include/linux/platform_data/ads7828.h). The structure fields are: * diff_input: (bool) Differential operation - set to true for differential mode, false for default single ended mode. + set to true for differential mode, false for default single ended mode. * ext_vref: (bool) External reference - set to true if it operates with an external reference, false for default - internal reference. + set to true if it operates with an external reference, false for default + internal reference. * vref_mv: (unsigned int) Voltage reference - if using an external reference, set this to the reference voltage in mV, - otherwise it will default to the internal value (2500mV). This value will be - bounded with limits accepted by the chip, described in the datasheet. + if using an external reference, set this to the reference voltage in mV, + otherwise it will default to the internal value (2500mV). This value will be + bounded with limits accepted by the chip, described in the datasheet. If no structure is provided, the configuration defaults to single ended operation and internal voltage reference (2.5V). diff --git a/Documentation/hwmon/adt7410 b/Documentation/hwmon/adt7410 index 9817941e5f19..24caaa83c8ec 100644 --- a/Documentation/hwmon/adt7410 +++ b/Documentation/hwmon/adt7410 @@ -2,26 +2,45 @@ Kernel driver adt7410 ===================== Supported chips: + * Analog Devices ADT7410 + Prefix: 'adt7410' + Addresses scanned: None + Datasheet: Publicly available at the Analog Devices website - http://www.analog.com/static/imported-files/data_sheets/ADT7410.pdf + + http://www.analog.com/static/imported-files/data_sheets/ADT7410.pdf * Analog Devices ADT7420 + Prefix: 'adt7420' + Addresses scanned: None + Datasheet: Publicly available at the Analog Devices website - http://www.analog.com/static/imported-files/data_sheets/ADT7420.pdf + + http://www.analog.com/static/imported-files/data_sheets/ADT7420.pdf + * Analog Devices ADT7310 + Prefix: 'adt7310' + Addresses scanned: None + Datasheet: Publicly available at the Analog Devices website - http://www.analog.com/static/imported-files/data_sheets/ADT7310.pdf + + http://www.analog.com/static/imported-files/data_sheets/ADT7310.pdf + * Analog Devices ADT7320 + Prefix: 'adt7320' + Addresses scanned: None + Datasheet: Publicly available at the Analog Devices website - http://www.analog.com/static/imported-files/data_sheets/ADT7320.pdf + + http://www.analog.com/static/imported-files/data_sheets/ADT7320.pdf Author: Hartmut Knaack @@ -61,13 +80,15 @@ The device is set to 16 bit resolution and comparator mode. sysfs-Interface --------------- -temp#_input - temperature input -temp#_min - temperature minimum setpoint -temp#_max - temperature maximum setpoint -temp#_crit - critical temperature setpoint -temp#_min_hyst - hysteresis for temperature minimum (read-only) -temp#_max_hyst - hysteresis for temperature maximum (read/write) -temp#_crit_hyst - hysteresis for critical temperature (read-only) -temp#_min_alarm - temperature minimum alarm flag -temp#_max_alarm - temperature maximum alarm flag -temp#_crit_alarm - critical temperature alarm flag +======================== ==================================================== +temp#_input temperature input +temp#_min temperature minimum setpoint +temp#_max temperature maximum setpoint +temp#_crit critical temperature setpoint +temp#_min_hyst hysteresis for temperature minimum (read-only) +temp#_max_hyst hysteresis for temperature maximum (read/write) +temp#_crit_hyst hysteresis for critical temperature (read-only) +temp#_min_alarm temperature minimum alarm flag +temp#_max_alarm temperature maximum alarm flag +temp#_crit_alarm critical temperature alarm flag +======================== ==================================================== diff --git a/Documentation/hwmon/adt7411 b/Documentation/hwmon/adt7411 index 1632960f9745..57ad16fb216a 100644 --- a/Documentation/hwmon/adt7411 +++ b/Documentation/hwmon/adt7411 @@ -2,9 +2,13 @@ Kernel driver adt7411 ===================== Supported chips: + * Analog Devices ADT7411 + Prefix: 'adt7411' + Addresses scanned: 0x48, 0x4a, 0x4b + Datasheet: Publicly available at the Analog Devices website Author: Wolfram Sang (based on adt7470 by Darrick J. Wong) @@ -26,15 +30,19 @@ Check the datasheet for details. sysfs-Interface --------------- -in0_input - vdd voltage input -in[1-8]_input - analog 1-8 input -temp1_input - temperature input +================ ================= +in0_input vdd voltage input +in[1-8]_input analog 1-8 input +temp1_input temperature input +================ ================= Besides standard interfaces, this driver adds (0 = off, 1 = on): - adc_ref_vdd - Use vdd as reference instead of 2.25 V - fast_sampling - Sample at 22.5 kHz instead of 1.4 kHz, but drop filters - no_average - Turn off averaging over 16 samples + ============== ======================================================= + adc_ref_vdd Use vdd as reference instead of 2.25 V + fast_sampling Sample at 22.5 kHz instead of 1.4 kHz, but drop filters + no_average Turn off averaging over 16 samples + ============== ======================================================= Notes ----- diff --git a/Documentation/hwmon/adt7462 b/Documentation/hwmon/adt7462 index ec660b328275..a7a831118d32 100644 --- a/Documentation/hwmon/adt7462 +++ b/Documentation/hwmon/adt7462 @@ -1,10 +1,14 @@ Kernel driver adt7462 -====================== +===================== Supported chips: + * Analog Devices ADT7462 + Prefix: 'adt7462' + Addresses scanned: I2C 0x58, 0x5C + Datasheet: Publicly available at the Analog Devices website Author: Darrick J. Wong @@ -57,8 +61,8 @@ Besides standard interfaces driver adds the following: * pwm#_auto_point1_pwm and temp#_auto_point1_temp and * pwm#_auto_point2_pwm and temp#_auto_point2_temp - -point1: Set the pwm speed at a lower temperature bound. -point2: Set the pwm speed at a higher temperature bound. + - point1: Set the pwm speed at a lower temperature bound. + - point2: Set the pwm speed at a higher temperature bound. The ADT7462 will scale the pwm between the lower and higher pwm speed when the temperature is between the two temperature boundaries. PWM values range diff --git a/Documentation/hwmon/adt7470 b/Documentation/hwmon/adt7470 index fe68e18a0c8d..d225f816e992 100644 --- a/Documentation/hwmon/adt7470 +++ b/Documentation/hwmon/adt7470 @@ -2,9 +2,13 @@ Kernel driver adt7470 ===================== Supported chips: + * Analog Devices ADT7470 + Prefix: 'adt7470' + Addresses scanned: I2C 0x2C, 0x2E, 0x2F + Datasheet: Publicly available at the Analog Devices website Author: Darrick J. Wong @@ -56,8 +60,8 @@ Besides standard interfaces driver adds the following: * pwm#_auto_point1_pwm and pwm#_auto_point1_temp and * pwm#_auto_point2_pwm and pwm#_auto_point2_temp - -point1: Set the pwm speed at a lower temperature bound. -point2: Set the pwm speed at a higher temperature bound. + - point1: Set the pwm speed at a lower temperature bound. + - point2: Set the pwm speed at a higher temperature bound. The ADT7470 will scale the pwm between the lower and higher pwm speed when the temperature is between the two temperature boundaries. PWM values range diff --git a/Documentation/hwmon/adt7475 b/Documentation/hwmon/adt7475 index 01b46b290532..ef3ea1ea9bc1 100644 --- a/Documentation/hwmon/adt7475 +++ b/Documentation/hwmon/adt7475 @@ -2,28 +2,44 @@ Kernel driver adt7475 ===================== Supported chips: + * Analog Devices ADT7473 + Prefix: 'adt7473' + Addresses scanned: I2C 0x2C, 0x2D, 0x2E + Datasheet: Publicly available at the On Semiconductors website + * Analog Devices ADT7475 + Prefix: 'adt7475' + Addresses scanned: I2C 0x2E + Datasheet: Publicly available at the On Semiconductors website + * Analog Devices ADT7476 + Prefix: 'adt7476' + Addresses scanned: I2C 0x2C, 0x2D, 0x2E + Datasheet: Publicly available at the On Semiconductors website + * Analog Devices ADT7490 + Prefix: 'adt7490' + Addresses scanned: I2C 0x2C, 0x2D, 0x2E + Datasheet: Publicly available at the On Semiconductors website Authors: - Jordan Crouse - Hans de Goede - Darrick J. Wong (documentation) - Jean Delvare + - Jordan Crouse + - Hans de Goede + - Darrick J. Wong (documentation) + - Jean Delvare Description @@ -82,14 +98,16 @@ ADT7490: Sysfs Mapping ------------- - ADT7490 ADT7476 ADT7475 ADT7473 - ------- ------- ------- ------- +==== =========== =========== ========= ========== +in ADT7490 ADT7476 ADT7475 ADT7473 +==== =========== =========== ========= ========== in0 2.5VIN (22) 2.5VIN (22) - - in1 VCCP (23) VCCP (23) VCCP (14) VCCP (14) in2 VCC (4) VCC (4) VCC (4) VCC (3) in3 5VIN (20) 5VIN (20) in4 12VIN (21) 12VIN (21) in5 VTT (8) +==== =========== =========== ========= ========== Special Features ---------------- @@ -107,8 +125,8 @@ Fan Speed Control The driver exposes two trip points per PWM channel. -point1: Set the PWM speed at the lower temperature bound -point2: Set the PWM speed at the higher temperature bound +- point1: Set the PWM speed at the lower temperature bound +- point2: Set the PWM speed at the higher temperature bound The ADT747x will scale the PWM linearly between the lower and higher PWM speed when the temperature is between the two temperature boundaries. @@ -123,12 +141,12 @@ the PWM control exceeds temp#_max. At Tmin - hysteresis the PWM output can either be off (0% duty cycle) or at the minimum (i.e. auto_point1_pwm). This behaviour can be configured using the -pwm[1-*]_stall_disable sysfs attribute. A value of 0 means the fans will shut +`pwm[1-*]_stall_disable sysfs attribute`. A value of 0 means the fans will shut off. A value of 1 means the fans will run at auto_point1_pwm. The responsiveness of the ADT747x to temperature changes can be configured. This allows smoothing of the fan speed transition. To set the transition time -set the value in ms in the temp[1-*]_smoothing sysfs attribute. +set the value in ms in the `temp[1-*]_smoothing` sysfs attribute. Notes ----- diff --git a/Documentation/hwmon/amc6821 b/Documentation/hwmon/amc6821 index ced8359c50f8..d10eabcbc0f3 100644 --- a/Documentation/hwmon/amc6821 +++ b/Documentation/hwmon/amc6821 @@ -2,9 +2,13 @@ Kernel driver amc6821 ===================== Supported chips: + Texas Instruments AMC6821 + Prefix: 'amc6821' + Addresses scanned: 0x18, 0x19, 0x1a, 0x2c, 0x2d, 0x2e, 0x4c, 0x4d, 0x4e + Datasheet: http://focus.ti.com/docs/prod/folders/print/amc6821.html Authors: @@ -21,10 +25,11 @@ The pwm can be controlled either from software or automatically. The driver provides the following sensor accesses in sysfs: +======================= == =============================================== temp1_input ro on-chip temperature temp1_min rw " temp1_max rw " -temp1_crit rw " +temp1_crit rw " temp1_min_alarm ro " temp1_max_alarm ro " temp1_crit_alarm ro " @@ -32,16 +37,16 @@ temp1_crit_alarm ro " temp2_input ro remote temperature temp2_min rw " temp2_max rw " -temp2_crit rw " +temp2_crit rw " temp2_min_alarm ro " temp2_max_alarm ro " temp2_crit_alarm ro " temp2_fault ro " -fan1_input ro tachometer speed +fan1_input ro tachometer speed fan1_min rw " fan1_max rw " -fan1_fault ro " +fan1_fault ro " fan1_div rw Fan divisor can be either 2 or 4. pwm1 rw pwm1 @@ -87,6 +92,7 @@ temp2_auto_point3_temp rw Above this temperature fan runs at maximum values which depend on temp2_auto_point2_temp and pwm1_auto_point2_pwm. Read it out after writing to get actual value. +======================= == =============================================== Module parameters @@ -97,6 +103,7 @@ load the module with: init=0. If your board BIOS doesn't initialize the chip, or you want different settings, you can set the following parameters: -init=1, -pwminv: 0 default pwm output, 1 inverts pwm output. + +- init=1, +- pwminv: 0 default pwm output, 1 inverts pwm output. diff --git a/Documentation/hwmon/asb100 b/Documentation/hwmon/asb100 index ab7365e139be..311d9f7b6926 100644 --- a/Documentation/hwmon/asb100 +++ b/Documentation/hwmon/asb100 @@ -2,9 +2,13 @@ Kernel driver asb100 ==================== Supported Chips: + * Asus ASB100 and ASB100-A "Bach" + Prefix: 'asb100' + Addresses scanned: I2C 0x2d + Datasheet: none released Author: Mark M. Hoffman @@ -41,32 +45,30 @@ processor itself. It is a value in volts. Alarms: (TODO question marks indicate may or may not work) -0x0001 => in0 (?) -0x0002 => in1 (?) -0x0004 => in2 -0x0008 => in3 -0x0010 => temp1 (1) -0x0020 => temp2 -0x0040 => fan1 -0x0080 => fan2 -0x0100 => in4 -0x0200 => in5 (?) (2) -0x0400 => in6 (?) (2) -0x0800 => fan3 -0x1000 => chassis switch -0x2000 => temp3 +- 0x0001 => in0 (?) +- 0x0002 => in1 (?) +- 0x0004 => in2 +- 0x0008 => in3 +- 0x0010 => temp1 [1]_ +- 0x0020 => temp2 +- 0x0040 => fan1 +- 0x0080 => fan2 +- 0x0100 => in4 +- 0x0200 => in5 (?) [2]_ +- 0x0400 => in6 (?) [2]_ +- 0x0800 => fan3 +- 0x1000 => chassis switch +- 0x2000 => temp3 -Alarm Notes: +.. [1] This alarm will only trigger if the hysteresis value is 127C. + I.e. it behaves the same as w83781d. -(1) This alarm will only trigger if the hysteresis value is 127C. -I.e. it behaves the same as w83781d. - -(2) The min and max registers for these values appear to -be read-only or otherwise stuck at 0x00. +.. [2] The min and max registers for these values appear to + be read-only or otherwise stuck at 0x00. TODO: -* Experiment with fan divisors > 8. -* Experiment with temp. sensor types. -* Are there really 13 voltage inputs? Probably not... -* Cleanups, no doubt... + * Experiment with fan divisors > 8. + * Experiment with temp. sensor types. + * Are there really 13 voltage inputs? Probably not... + * Cleanups, no doubt... diff --git a/Documentation/hwmon/ds1621 b/Documentation/hwmon/ds1621 index fa3407997795..552b37e9dd34 100644 --- a/Documentation/hwmon/ds1621 +++ b/Documentation/hwmon/ds1621 @@ -2,42 +2,61 @@ Kernel driver ds1621 ==================== Supported chips: + * Dallas Semiconductor / Maxim Integrated DS1621 + Prefix: 'ds1621' + Addresses scanned: none + Datasheet: Publicly available from www.maximintegrated.com * Dallas Semiconductor DS1625 + Prefix: 'ds1625' + Addresses scanned: none + Datasheet: Publicly available from www.datasheetarchive.com * Maxim Integrated DS1631 + Prefix: 'ds1631' + Addresses scanned: none + Datasheet: Publicly available from www.maximintegrated.com * Maxim Integrated DS1721 + Prefix: 'ds1721' + Addresses scanned: none + Datasheet: Publicly available from www.maximintegrated.com * Maxim Integrated DS1731 + Prefix: 'ds1731' + Addresses scanned: none + Datasheet: Publicly available from www.maximintegrated.com Authors: - Christian W. Zuckschwerdt - valuable contributions by Jan M. Sendler - ported to 2.6 by Aurelien Jarno - with the help of Jean Delvare + - Christian W. Zuckschwerdt + - valuable contributions by Jan M. Sendler + - ported to 2.6 by Aurelien Jarno + with the help of Jean Delvare Module Parameters ------------------ * polarity int - Output's polarity: 0 = active high, 1 = active low + Output's polarity: + + * 0 = active high, + * 1 = active low Description ----------- @@ -87,28 +106,31 @@ are used internally, however, these flags do get set and cleared as the actual temperature crosses the min or max settings (which by default are set to 75 and 80 degrees respectively). -Temperature Conversion: ------------------------ -DS1621 - 750ms (older devices may take up to 1000ms) -DS1625 - 500ms -DS1631 - 93ms..750ms for 9..12 bits resolution, respectively. -DS1721 - 93ms..750ms for 9..12 bits resolution, respectively. -DS1731 - 93ms..750ms for 9..12 bits resolution, respectively. +Temperature Conversion +---------------------- + +- DS1621 - 750ms (older devices may take up to 1000ms) +- DS1625 - 500ms +- DS1631 - 93ms..750ms for 9..12 bits resolution, respectively. +- DS1721 - 93ms..750ms for 9..12 bits resolution, respectively. +- DS1731 - 93ms..750ms for 9..12 bits resolution, respectively. Note: On the DS1621, internal access to non-volatile registers may last for 10ms or less (unverified on the other devices). -Temperature Accuracy: ---------------------- -DS1621: +/- 0.5 degree Celsius (from 0 to +70 degrees) -DS1625: +/- 0.5 degree Celsius (from 0 to +70 degrees) -DS1631: +/- 0.5 degree Celsius (from 0 to +70 degrees) -DS1721: +/- 1.0 degree Celsius (from -10 to +85 degrees) -DS1731: +/- 1.0 degree Celsius (from -10 to +85 degrees) +Temperature Accuracy +-------------------- -Note: -Please refer to the device datasheets for accuracy at other temperatures. +- DS1621: +/- 0.5 degree Celsius (from 0 to +70 degrees) +- DS1625: +/- 0.5 degree Celsius (from 0 to +70 degrees) +- DS1631: +/- 0.5 degree Celsius (from 0 to +70 degrees) +- DS1721: +/- 1.0 degree Celsius (from -10 to +85 degrees) +- DS1731: +/- 1.0 degree Celsius (from -10 to +85 degrees) + +.. Note:: + + Please refer to the device datasheets for accuracy at other temperatures. Temperature Resolution: ----------------------- @@ -117,60 +139,67 @@ support, which is achieved via the R0 and R1 config register bits, where: R0..R1 ------ - 0 0 => 9 bits, 0.5 degrees Celsius - 1 0 => 10 bits, 0.25 degrees Celsius - 0 1 => 11 bits, 0.125 degrees Celsius - 1 1 => 12 bits, 0.0625 degrees Celsius -Note: -At initial device power-on, the default resolution is set to 12-bits. +== == =============================== +R0 R1 +== == =============================== + 0 0 9 bits, 0.5 degrees Celsius + 1 0 10 bits, 0.25 degrees Celsius + 0 1 11 bits, 0.125 degrees Celsius + 1 1 12 bits, 0.0625 degrees Celsius +== == =============================== + +.. Note:: + + At initial device power-on, the default resolution is set to 12-bits. The resolution mode for the DS1631, DS1721, or DS1731 can be changed from userspace, via the device 'update_interval' sysfs attribute. This attribute will normalize the range of input values to the device maximum resolution values defined in the datasheet as follows: +============= ================== =============== Resolution Conversion Time Input Range (C/LSB) (msec) (msec) ------------------------------------------------- +============= ================== =============== 0.5 93.75 0....94 0.25 187.5 95...187 0.125 375 188..375 0.0625 750 376..infinity ------------------------------------------------- +============= ================== =============== The following examples show how the 'update_interval' attribute can be -used to change the conversion time: +used to change the conversion time:: -$ cat update_interval -750 -$ cat temp1_input -22062 -$ -$ echo 300 > update_interval -$ cat update_interval -375 -$ cat temp1_input -22125 -$ -$ echo 150 > update_interval -$ cat update_interval -188 -$ cat temp1_input -22250 -$ -$ echo 1 > update_interval -$ cat update_interval -94 -$ cat temp1_input -22000 -$ -$ echo 1000 > update_interval -$ cat update_interval -750 -$ cat temp1_input -22062 -$ + $ cat update_interval + 750 + $ cat temp1_input + 22062 + $ + $ echo 300 > update_interval + $ cat update_interval + 375 + $ cat temp1_input + 22125 + $ + $ echo 150 > update_interval + $ cat update_interval + 188 + $ cat temp1_input + 22250 + $ + $ echo 1 > update_interval + $ cat update_interval + 94 + $ cat temp1_input + 22000 + $ + $ echo 1000 > update_interval + $ cat update_interval + 750 + $ cat temp1_input + 22062 + $ As shown, the ds1621 driver automatically adjusts the 'update_interval' user input, via a step function. Reading back the 'update_interval' value @@ -182,6 +211,7 @@ via the following function: g(x) = 0.5 * [minimum_conversion_time/x] where: - -> 'x' = the output from 'update_interval' - -> 'g(x)' = the resolution in degrees C per LSB. - -> 93.75ms = minimum conversion time + + - 'x' = the output from 'update_interval' + - 'g(x)' = the resolution in degrees C per LSB. + - 93.75ms = minimum conversion time diff --git a/Documentation/hwmon/ds620 b/Documentation/hwmon/ds620 index 1fbe3cd916cc..2d686b17b547 100644 --- a/Documentation/hwmon/ds620 +++ b/Documentation/hwmon/ds620 @@ -2,15 +2,19 @@ Kernel driver ds620 =================== Supported chips: + * Dallas Semiconductor DS620 + Prefix: 'ds620' + Datasheet: Publicly available at the Dallas Semiconductor website - http://www.dalsemi.com/ + + http://www.dalsemi.com/ Authors: - Roland Stigge - based on ds1621.c by - Christian W. Zuckschwerdt + Roland Stigge + based on ds1621.c by + Christian W. Zuckschwerdt Description ----------- diff --git a/Documentation/hwmon/emc1403 b/Documentation/hwmon/emc1403 index a869b0ef6a9d..3a4913b63ef3 100644 --- a/Documentation/hwmon/emc1403 +++ b/Documentation/hwmon/emc1403 @@ -2,28 +2,48 @@ Kernel driver emc1403 ===================== Supported chips: + * SMSC / Microchip EMC1402, EMC1412 + Addresses scanned: I2C 0x18, 0x1c, 0x29, 0x4c, 0x4d, 0x5c + Prefix: 'emc1402' + Datasheets: - http://ww1.microchip.com/downloads/en/DeviceDoc/1412.pdf - http://ww1.microchip.com/downloads/en/DeviceDoc/1402.pdf + + - http://ww1.microchip.com/downloads/en/DeviceDoc/1412.pdf + - http://ww1.microchip.com/downloads/en/DeviceDoc/1402.pdf + * SMSC / Microchip EMC1403, EMC1404, EMC1413, EMC1414 + Addresses scanned: I2C 0x18, 0x29, 0x4c, 0x4d + Prefix: 'emc1403', 'emc1404' + Datasheets: - http://ww1.microchip.com/downloads/en/DeviceDoc/1403_1404.pdf - http://ww1.microchip.com/downloads/en/DeviceDoc/1413_1414.pdf + + - http://ww1.microchip.com/downloads/en/DeviceDoc/1403_1404.pdf + - http://ww1.microchip.com/downloads/en/DeviceDoc/1413_1414.pdf + * SMSC / Microchip EMC1422 + Addresses scanned: I2C 0x4c + Prefix: 'emc1422' + Datasheet: - http://ww1.microchip.com/downloads/en/DeviceDoc/1422.pdf + + - http://ww1.microchip.com/downloads/en/DeviceDoc/1422.pdf + * SMSC / Microchip EMC1423, EMC1424 + Addresses scanned: I2C 0x4c + Prefix: 'emc1423', 'emc1424' + Datasheet: - http://ww1.microchip.com/downloads/en/DeviceDoc/1423_1424.pdf + + - http://ww1.microchip.com/downloads/en/DeviceDoc/1423_1424.pdf Author: Kalhan Trisal @@ -38,5 +42,6 @@ Known Systems With EMC6W201 The EMC6W201 is a rare device, only found on a few systems, made in 2005 and 2006. Known systems with this device: + * Dell Precision 670 workstation * Gigabyte 2CEWH mainboard diff --git a/Documentation/hwmon/f71805f b/Documentation/hwmon/f71805f index 48a356084bc6..1efe5e5d337c 100644 --- a/Documentation/hwmon/f71805f +++ b/Documentation/hwmon/f71805f @@ -2,17 +2,29 @@ Kernel driver f71805f ===================== Supported chips: + * Fintek F71805F/FG + Prefix: 'f71805f' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Available from the Fintek website + * Fintek F71806F/FG + Prefix: 'f71872f' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Available from the Fintek website + * Fintek F71872F/FG + Prefix: 'f71872f' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Available from the Fintek website Author: Jean Delvare @@ -64,24 +76,26 @@ you can only set the limits in steps of 32 mV (before scaling). The wirings and resistor values suggested by Fintek are as follow: - pin expected - name use R1 R2 divider raw val. - +======= ======= =========== ==== ======= ============ ============== +in pin expected + name use R1 R2 divider raw val. +======= ======= =========== ==== ======= ============ ============== in0 VCC VCC3.3V int. int. 2.00 1.65 V in1 VIN1 VTT1.2V 10K - 1.00 1.20 V -in2 VIN2 VRAM 100K 100K 2.00 ~1.25 V (1) -in3 VIN3 VCHIPSET 47K 100K 1.47 2.24 V (2) +in2 VIN2 VRAM 100K 100K 2.00 ~1.25 V [1]_ +in3 VIN3 VCHIPSET 47K 100K 1.47 2.24 V [2]_ in4 VIN4 VCC5V 200K 47K 5.25 0.95 V in5 VIN5 +12V 200K 20K 11.00 1.05 V in6 VIN6 VCC1.5V 10K - 1.00 1.50 V -in7 VIN7 VCORE 10K - 1.00 ~1.40 V (1) +in7 VIN7 VCORE 10K - 1.00 ~1.40 V [1]_ in8 VIN8 VSB5V 200K 47K 1.00 0.95 V -in10 VSB VSB3.3V int. int. 2.00 1.65 V (3) -in9 VBAT VBATTERY int. int. 2.00 1.50 V (3) +in10 VSB VSB3.3V int. int. 2.00 1.65 V [3]_ +in9 VBAT VBATTERY int. int. 2.00 1.50 V [3]_ +======= ======= =========== ==== ======= ============ ============== -(1) Depends on your hardware setup. -(2) Obviously not correct, swapping R1 and R2 would make more sense. -(3) F71872F/FG only. +.. [1] Depends on your hardware setup. +.. [2] Obviously not correct, swapping R1 and R2 would make more sense. +.. [3] F71872F/FG only. These values can be used as hints at best, as motherboard manufacturers are free to use a completely different setup. As a matter of fact, the diff --git a/Documentation/hwmon/f71882fg b/Documentation/hwmon/f71882fg index 4c3cb8377d74..5c0b7b0db150 100644 --- a/Documentation/hwmon/f71882fg +++ b/Documentation/hwmon/f71882fg @@ -2,60 +2,114 @@ Kernel driver f71882fg ====================== Supported chips: + * Fintek F71808E + Prefix: 'f71808e' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Not public + * Fintek F71808A + Prefix: 'f71808a' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Not public + * Fintek F71858FG + Prefix: 'f71858fg' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Available from the Fintek website + * Fintek F71862FG and F71863FG + Prefix: 'f71862fg' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Available from the Fintek website + * Fintek F71869F and F71869E + Prefix: 'f71869' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Available from the Fintek website + * Fintek F71869A + Prefix: 'f71869a' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Not public + * Fintek F71882FG and F71883FG + Prefix: 'f71882fg' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Available from the Fintek website + * Fintek F71889FG + Prefix: 'f71889fg' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Available from the Fintek website + * Fintek F71889ED + Prefix: 'f71889ed' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Should become available on the Fintek website soon + * Fintek F71889A + Prefix: 'f71889a' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Should become available on the Fintek website soon + * Fintek F8000 + Prefix: 'f8000' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Not public + * Fintek F81801U + Prefix: 'f71889fg' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Not public - Note: This is the 64-pin variant of the F71889FG, they have the + + Note: + This is the 64-pin variant of the F71889FG, they have the same device ID and are fully compatible as far as hardware monitoring is concerned. + * Fintek F81865F + Prefix: 'f81865f' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Available from the Fintek website Author: Hans de Goede diff --git a/Documentation/hwmon/ftsteutates b/Documentation/hwmon/ftsteutates index af54db92391b..58a2483d8d0d 100644 --- a/Documentation/hwmon/ftsteutates +++ b/Documentation/hwmon/ftsteutates @@ -1,9 +1,12 @@ Kernel driver ftsteutates -===================== +========================= Supported chips: + * FTS Teutates + Prefix: 'ftsteutates' + Addresses scanned: I2C 0x73 (7-Bit) Author: Thilo Cestonaro @@ -11,6 +14,7 @@ Author: Thilo Cestonaro Description ----------- + The BMC Teutates is the Eleventh generation of Superior System monitoring and thermal management solution. It is builds on the basic functionality of the BMC Theseus and contains several new features and @@ -19,9 +23,11 @@ enhancements. It can monitor up to 4 voltages, 16 temperatures and implemented in this driver. To clear a temperature or fan alarm, execute the following command with the -correct path to the alarm file: +correct path to the alarm file:: + echo 0 >XXXX_alarm Specification of the chip can be found here: -ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/BMC-Teutates_Specification_V1.21.pdf -ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/Fujitsu_mainboards-1-Sensors_HowTo-en-US.pdf + +- ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/BMC-Teutates_Specification_V1.21.pdf +- ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/Fujitsu_mainboards-1-Sensors_HowTo-en-US.pdf diff --git a/Documentation/hwmon/g760a b/Documentation/hwmon/g760a index cfc894537061..d82952cc8319 100644 --- a/Documentation/hwmon/g760a +++ b/Documentation/hwmon/g760a @@ -2,9 +2,13 @@ Kernel driver g760a =================== Supported chips: + * Global Mixed-mode Technology Inc. G760A + Prefix: 'g760a' + Datasheet: Publicly available at the GMT website + http://www.gmt.com.tw/product/datasheet/EDS-760A.pdf Author: Herbert Valerio Riedel diff --git a/Documentation/hwmon/g762 b/Documentation/hwmon/g762 index 923db9c5b5bc..54574e26df21 100644 --- a/Documentation/hwmon/g762 +++ b/Documentation/hwmon/g762 @@ -21,34 +21,43 @@ documented in Documentation/devicetree/bindings/hwmon/g762.txt or using a specific platform_data structure in board initialization file (see include/linux/platform_data/g762.h). - fan1_target: set desired fan speed. This only makes sense in closed-loop - fan speed control (i.e. when pwm1_enable is set to 2). + fan1_target: + set desired fan speed. This only makes sense in closed-loop + fan speed control (i.e. when pwm1_enable is set to 2). - fan1_input: provide current fan rotation value in RPM as reported by - the fan to the device. + fan1_input: + provide current fan rotation value in RPM as reported by + the fan to the device. - fan1_div: fan clock divisor. Supported value are 1, 2, 4 and 8. + fan1_div: + fan clock divisor. Supported value are 1, 2, 4 and 8. - fan1_pulses: number of pulses per fan revolution. Supported values - are 2 and 4. + fan1_pulses: + number of pulses per fan revolution. Supported values + are 2 and 4. - fan1_fault: reports fan failure, i.e. no transition on fan gear pin for - about 0.7s (if the fan is not voluntarily set off). + fan1_fault: + reports fan failure, i.e. no transition on fan gear pin for + about 0.7s (if the fan is not voluntarily set off). - fan1_alarm: in closed-loop control mode, if fan RPM value is 25% out - of the programmed value for over 6 seconds 'fan1_alarm' is - set to 1. + fan1_alarm: + in closed-loop control mode, if fan RPM value is 25% out + of the programmed value for over 6 seconds 'fan1_alarm' is + set to 1. - pwm1_enable: set current fan speed control mode i.e. 1 for manual fan - speed control (open-loop) via pwm1 described below, 2 for - automatic fan speed control (closed-loop) via fan1_target - above. + pwm1_enable: + set current fan speed control mode i.e. 1 for manual fan + speed control (open-loop) via pwm1 described below, 2 for + automatic fan speed control (closed-loop) via fan1_target + above. - pwm1_mode: set or get fan driving mode: 1 for PWM mode, 0 for DC mode. + pwm1_mode: + set or get fan driving mode: 1 for PWM mode, 0 for DC mode. - pwm1: get or set PWM fan control value in open-loop mode. This is an - integer value between 0 and 255. 0 stops the fan, 255 makes - it run at full speed. + pwm1: + get or set PWM fan control value in open-loop mode. This is an + integer value between 0 and 255. 0 stops the fan, 255 makes + it run at full speed. Both in PWM mode ('pwm1_mode' set to 1) and DC mode ('pwm1_mode' set to 0), when current fan speed control mode is open-loop ('pwm1_enable' set to 1), diff --git a/Documentation/hwmon/gl518sm b/Documentation/hwmon/gl518sm index 494bb55b6e72..bf1e0b5e824b 100644 --- a/Documentation/hwmon/gl518sm +++ b/Documentation/hwmon/gl518sm @@ -2,27 +2,34 @@ Kernel driver gl518sm ===================== Supported chips: + * Genesys Logic GL518SM release 0x00 + Prefix: 'gl518sm' + Addresses scanned: I2C 0x2c and 0x2d + * Genesys Logic GL518SM release 0x80 + Prefix: 'gl518sm' + Addresses scanned: I2C 0x2c and 0x2d + Datasheet: http://www.genesyslogic.com/ Authors: - Frodo Looijaard , - Kyösti Mälkki - Hong-Gunn Chew - Jean Delvare + - Frodo Looijaard , + - Kyösti Mälkki + - Hong-Gunn Chew + - Jean Delvare Description ----------- -IMPORTANT: +.. important:: -For the revision 0x00 chip, the in0, in1, and in2 values (+5V, +3V, -and +12V) CANNOT be read. This is a limitation of the chip, not the driver. + For the revision 0x00 chip, the in0, in1, and in2 values (+5V, +3V, + and +12V) CANNOT be read. This is a limitation of the chip, not the driver. This driver supports the Genesys Logic GL518SM chip. There are at least two revision of this chip, which we call revision 0x00 and 0x80. Revision diff --git a/Documentation/hwmon/hih6130 b/Documentation/hwmon/hih6130 index 73dae918ea7b..649bd4be4fc2 100644 --- a/Documentation/hwmon/hih6130 +++ b/Documentation/hwmon/hih6130 @@ -2,11 +2,16 @@ Kernel driver hih6130 ===================== Supported chips: + * Honeywell HIH-6130 / HIH-6131 + Prefix: 'hih6130' + Addresses scanned: none + Datasheet: Publicly available at the Honeywell website - http://sensing.honeywell.com/index.php?ci_id=3106&la_id=1&defId=44872 + + http://sensing.honeywell.com/index.php?ci_id=3106&la_id=1&defId=44872 Author: Iain Paton @@ -28,8 +33,11 @@ instantiate I2C devices. sysfs-Interface --------------- -temp1_input - temperature input -humidity1_input - humidity input +temp1_input + temperature input + +humidity1_input + humidity input Notes ----- diff --git a/Documentation/hwmon/hwmon-kernel-api.txt b/Documentation/hwmon/hwmon-kernel-api.txt index f8e2ab5c21b9..b347b959fcda 100644 --- a/Documentation/hwmon/hwmon-kernel-api.txt +++ b/Documentation/hwmon/hwmon-kernel-api.txt @@ -1,5 +1,5 @@ -The Linux Hardware Monitoring kernel API. -========================================= +The Linux Hardware Monitoring kernel API +======================================== Guenter Roeck @@ -21,33 +21,34 @@ The API ------- Each hardware monitoring driver must #include and, in most cases, . linux/hwmon.h declares the following -register/unregister functions: +register/unregister functions:: -struct device * -hwmon_device_register_with_groups(struct device *dev, const char *name, - void *drvdata, - const struct attribute_group **groups); + struct device * + hwmon_device_register_with_groups(struct device *dev, const char *name, + void *drvdata, + const struct attribute_group **groups); -struct device * -devm_hwmon_device_register_with_groups(struct device *dev, - const char *name, void *drvdata, - const struct attribute_group **groups); + struct device * + devm_hwmon_device_register_with_groups(struct device *dev, + const char *name, void *drvdata, + const struct attribute_group **groups); -struct device * -hwmon_device_register_with_info(struct device *dev, - const char *name, void *drvdata, - const struct hwmon_chip_info *info, - const struct attribute_group **extra_groups); + struct device * + hwmon_device_register_with_info(struct device *dev, + const char *name, void *drvdata, + const struct hwmon_chip_info *info, + const struct attribute_group **extra_groups); -struct device * -devm_hwmon_device_register_with_info(struct device *dev, - const char *name, - void *drvdata, - const struct hwmon_chip_info *info, - const struct attribute_group **extra_groups); + struct device * + devm_hwmon_device_register_with_info(struct device *dev, + const char *name, + void *drvdata, + const struct hwmon_chip_info *info, + const struct attribute_group **extra_groups); -void hwmon_device_unregister(struct device *dev); -void devm_hwmon_device_unregister(struct device *dev); + void hwmon_device_unregister(struct device *dev); + + void devm_hwmon_device_unregister(struct device *dev); hwmon_device_register_with_groups registers a hardware monitoring device. The first parameter of this function is a pointer to the parent device. @@ -100,78 +101,89 @@ Using devm_hwmon_device_register_with_info() hwmon_device_register_with_info() registers a hardware monitoring device. The parameters to this function are -struct device *dev Pointer to parent device -const char *name Device name -void *drvdata Driver private data -const struct hwmon_chip_info *info - Pointer to chip description. -const struct attribute_group **extra_groups - Null-terminated list of additional non-standard - sysfs attribute groups. +=============================================== =============================================== +`struct device *dev` Pointer to parent device +`const char *name` Device name +`void *drvdata` Driver private data +`const struct hwmon_chip_info *info` Pointer to chip description. +`const struct attribute_group **extra_groups` Null-terminated list of additional non-standard + sysfs attribute groups. +=============================================== =============================================== This function returns a pointer to the created hardware monitoring device on success and a negative error code for failure. -The hwmon_chip_info structure looks as follows. +The hwmon_chip_info structure looks as follows:: -struct hwmon_chip_info { - const struct hwmon_ops *ops; - const struct hwmon_channel_info **info; -}; + struct hwmon_chip_info { + const struct hwmon_ops *ops; + const struct hwmon_channel_info **info; + }; It contains the following fields: -* ops: Pointer to device operations. -* info: NULL-terminated list of device channel descriptors. +* ops: + Pointer to device operations. +* info: + NULL-terminated list of device channel descriptors. -The list of hwmon operations is defined as: +The list of hwmon operations is defined as:: -struct hwmon_ops { + struct hwmon_ops { umode_t (*is_visible)(const void *, enum hwmon_sensor_types type, u32 attr, int); int (*read)(struct device *, enum hwmon_sensor_types type, u32 attr, int, long *); int (*write)(struct device *, enum hwmon_sensor_types type, u32 attr, int, long); -}; + }; It defines the following operations. -* is_visible: Pointer to a function to return the file mode for each supported - attribute. This function is mandatory. +* is_visible: + Pointer to a function to return the file mode for each supported + attribute. This function is mandatory. -* read: Pointer to a function for reading a value from the chip. This function - is optional, but must be provided if any readable attributes exist. +* read: + Pointer to a function for reading a value from the chip. This function + is optional, but must be provided if any readable attributes exist. -* write: Pointer to a function for writing a value to the chip. This function is - optional, but must be provided if any writeable attributes exist. +* write: + Pointer to a function for writing a value to the chip. This function is + optional, but must be provided if any writeable attributes exist. Each sensor channel is described with struct hwmon_channel_info, which is -defined as follows. +defined as follows:: -struct hwmon_channel_info { - enum hwmon_sensor_types type; - u32 *config; -}; + struct hwmon_channel_info { + enum hwmon_sensor_types type; + u32 *config; + }; It contains following fields: -* type: The hardware monitoring sensor type. - Supported sensor types are - * hwmon_chip A virtual sensor type, used to describe attributes - * which are not bound to a specific input or output - * hwmon_temp Temperature sensor - * hwmon_in Voltage sensor - * hwmon_curr Current sensor - * hwmon_power Power sensor - * hwmon_energy Energy sensor - * hwmon_humidity Humidity sensor - * hwmon_fan Fan speed sensor - * hwmon_pwm PWM control +* type: + The hardware monitoring sensor type. -* config: Pointer to a 0-terminated list of configuration values for each - sensor of the given type. Each value is a combination of bit values - describing the attributes supposed by a single sensor. + Supported sensor types are + + ================== ================================================== + hwmon_chip A virtual sensor type, used to describe attributes + which are not bound to a specific input or output + hwmon_temp Temperature sensor + hwmon_in Voltage sensor + hwmon_curr Current sensor + hwmon_power Power sensor + hwmon_energy Energy sensor + hwmon_humidity Humidity sensor + hwmon_fan Fan speed sensor + hwmon_pwm PWM control + ================== ================================================== + +* config: + Pointer to a 0-terminated list of configuration values for each + sensor of the given type. Each value is a combination of bit values + describing the attributes supposed by a single sensor. As an example, here is the complete description file for a LM75 compatible sensor chip. The chip has a single temperature sensor. The driver wants to @@ -179,61 +191,62 @@ register with the thermal subsystem (HWMON_C_REGISTER_TZ), and it supports the update_interval attribute (HWMON_C_UPDATE_INTERVAL). The chip supports reading the temperature (HWMON_T_INPUT), it has a maximum temperature register (HWMON_T_MAX) as well as a maximum temperature hysteresis register -(HWMON_T_MAX_HYST). +(HWMON_T_MAX_HYST):: -static const u32 lm75_chip_config[] = { - HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL, - 0 -}; + static const u32 lm75_chip_config[] = { + HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL, + 0 + }; -static const struct hwmon_channel_info lm75_chip = { - .type = hwmon_chip, - .config = lm75_chip_config, -}; + static const struct hwmon_channel_info lm75_chip = { + .type = hwmon_chip, + .config = lm75_chip_config, + }; -static const u32 lm75_temp_config[] = { - HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST, - 0 -}; + static const u32 lm75_temp_config[] = { + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST, + 0 + }; -static const struct hwmon_channel_info lm75_temp = { - .type = hwmon_temp, - .config = lm75_temp_config, -}; + static const struct hwmon_channel_info lm75_temp = { + .type = hwmon_temp, + .config = lm75_temp_config, + }; -static const struct hwmon_channel_info *lm75_info[] = { - &lm75_chip, - &lm75_temp, - NULL -}; + static const struct hwmon_channel_info *lm75_info[] = { + &lm75_chip, + &lm75_temp, + NULL + }; -The HWMON_CHANNEL_INFO() macro can and should be used when possible. -With this macro, the above example can be simplified to + The HWMON_CHANNEL_INFO() macro can and should be used when possible. + With this macro, the above example can be simplified to -static const struct hwmon_channel_info *lm75_info[] = { - HWMON_CHANNEL_INFO(chip, - HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL), - HWMON_CHANNEL_INFO(temp, - HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST), - NULL -}; + static const struct hwmon_channel_info *lm75_info[] = { + HWMON_CHANNEL_INFO(chip, + HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL), + HWMON_CHANNEL_INFO(temp, + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST), + NULL + }; -The remaining declarations are as follows. + The remaining declarations are as follows. -static const struct hwmon_ops lm75_hwmon_ops = { - .is_visible = lm75_is_visible, - .read = lm75_read, - .write = lm75_write, -}; + static const struct hwmon_ops lm75_hwmon_ops = { + .is_visible = lm75_is_visible, + .read = lm75_read, + .write = lm75_write, + }; -static const struct hwmon_chip_info lm75_chip_info = { - .ops = &lm75_hwmon_ops, - .info = lm75_info, -}; + static const struct hwmon_chip_info lm75_chip_info = { + .ops = &lm75_hwmon_ops, + .info = lm75_info, + }; A complete list of bit values indicating individual attribute support is defined in include/linux/hwmon.h. Definition prefixes are as follows. +=============== ================================================= HWMON_C_xxxx Chip attributes, for use with hwmon_chip. HWMON_T_xxxx Temperature attributes, for use with hwmon_temp. HWMON_I_xxxx Voltage attributes, for use with hwmon_in. @@ -244,57 +257,76 @@ HWMON_E_xxxx Energy attributes, for use with hwmon_energy. HWMON_H_xxxx Humidity attributes, for use with hwmon_humidity. HWMON_F_xxxx Fan speed attributes, for use with hwmon_fan. HWMON_PWM_xxxx PWM control attributes, for use with hwmon_pwm. +=============== ================================================= Driver callback functions ------------------------- Each driver provides is_visible, read, and write functions. Parameters -and return values for those functions are as follows. +and return values for those functions are as follows:: -umode_t is_visible_func(const void *data, enum hwmon_sensor_types type, - u32 attr, int channel) + umode_t is_visible_func(const void *data, enum hwmon_sensor_types type, + u32 attr, int channel) Parameters: - data: Pointer to device private data structure. - type: The sensor type. - attr: Attribute identifier associated with a specific attribute. + data: + Pointer to device private data structure. + type: + The sensor type. + attr: + Attribute identifier associated with a specific attribute. For example, the attribute value for HWMON_T_INPUT would be hwmon_temp_input. For complete mappings of bit fields to attribute values please see include/linux/hwmon.h. - channel:The sensor channel number. + channel: + The sensor channel number. Return value: The file mode for this attribute. Typically, this will be 0 (the attribute will not be created), S_IRUGO, or 'S_IRUGO | S_IWUSR'. -int read_func(struct device *dev, enum hwmon_sensor_types type, - u32 attr, int channel, long *val) +:: + + int read_func(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) Parameters: - dev: Pointer to the hardware monitoring device. - type: The sensor type. - attr: Attribute identifier associated with a specific attribute. + dev: + Pointer to the hardware monitoring device. + type: + The sensor type. + attr: + Attribute identifier associated with a specific attribute. For example, the attribute value for HWMON_T_INPUT would be hwmon_temp_input. For complete mappings please see include/linux/hwmon.h. - channel:The sensor channel number. - val: Pointer to attribute value. + channel: + The sensor channel number. + val: + Pointer to attribute value. Return value: 0 on success, a negative error number otherwise. -int write_func(struct device *dev, enum hwmon_sensor_types type, - u32 attr, int channel, long val) +:: + + int write_func(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long val) Parameters: - dev: Pointer to the hardware monitoring device. - type: The sensor type. - attr: Attribute identifier associated with a specific attribute. + dev: + Pointer to the hardware monitoring device. + type: + The sensor type. + attr: + Attribute identifier associated with a specific attribute. For example, the attribute value for HWMON_T_INPUT would be hwmon_temp_input. For complete mappings please see include/linux/hwmon.h. - channel:The sensor channel number. - val: The value to write to the chip. + channel: + The sensor channel number. + val: + The value to write to the chip. Return value: 0 on success, a negative error number otherwise. @@ -330,25 +362,25 @@ Standard functions, similar to DEVICE_ATTR_{RW,RO,WO}, have _show and _store appended to the provided function name. SENSOR_DEVICE_ATTR and its variants define a struct sensor_device_attribute -variable. This structure has the following fields. +variable. This structure has the following fields:: -struct sensor_device_attribute { - struct device_attribute dev_attr; - int index; -}; + struct sensor_device_attribute { + struct device_attribute dev_attr; + int index; + }; You can use to_sensor_dev_attr to get the pointer to this structure from the attribute read or write function. Its parameter is the device to which the attribute is attached. SENSOR_DEVICE_ATTR_2 and its variants define a struct sensor_device_attribute_2 -variable, which is defined as follows. +variable, which is defined as follows:: -struct sensor_device_attribute_2 { - struct device_attribute dev_attr; - u8 index; - u8 nr; -}; + struct sensor_device_attribute_2 { + struct device_attribute dev_attr; + u8 index; + u8 nr; + }; Use to_sensor_dev_attr_2 to get the pointer to this structure. Its parameter is the device to which the attribute is attached. diff --git a/Documentation/hwmon/ibmaem b/Documentation/hwmon/ibmaem index 1e0d59e000b4..f07a14a1c2f5 100644 --- a/Documentation/hwmon/ibmaem +++ b/Documentation/hwmon/ibmaem @@ -1,15 +1,21 @@ Kernel driver ibmaem -====================== +==================== This driver talks to the IBM Systems Director Active Energy Manager, known henceforth as AEM. Supported systems: + * Any recent IBM System X server with AEM support. + This includes the x3350, x3550, x3650, x3655, x3755, x3850 M2, - x3950 M2, and certain HC10/HS2x/LS2x/QS2x blades. The IPMI host interface + x3950 M2, and certain HC10/HS2x/LS2x/QS2x blades. + + The IPMI host interface driver ("ipmi-si") needs to be loaded for this driver to do anything. + Prefix: 'ibmaem' + Datasheet: Not available Author: Darrick J. Wong diff --git a/Documentation/hwmon/ina3221 b/Documentation/hwmon/ina3221 index ed3f22769d4b..1e34abb38b59 100644 --- a/Documentation/hwmon/ina3221 +++ b/Documentation/hwmon/ina3221 @@ -2,11 +2,16 @@ Kernel driver ina3221 ===================== Supported chips: + * Texas Instruments INA3221 + Prefix: 'ina3221' + Addresses: I2C 0x40 - 0x43 + Datasheet: Publicly available at the Texas Instruments website - http://www.ti.com/ + + http://www.ti.com/ Author: Andrew F. Davis @@ -21,20 +26,24 @@ and power are calculated host-side from these. Sysfs entries ------------- +======================= ======================================================= in[123]_label Voltage channel labels in[123]_enable Voltage channel enable controls in[123]_input Bus voltage(mV) channels curr[123]_input Current(mA) measurement channels shunt[123]_resistor Shunt resistance(uOhm) channels curr[123]_crit Critical alert current(mA) setting, activates the - corresponding alarm when the respective current - is above this value + corresponding alarm when the respective current + is above this value curr[123]_crit_alarm Critical alert current limit exceeded curr[123]_max Warning alert current(mA) setting, activates the - corresponding alarm when the respective current - average is above this value. + corresponding alarm when the respective current + average is above this value. curr[123]_max_alarm Warning alert current limit exceeded in[456]_input Shunt voltage(uV) for channels 1, 2, and 3 respectively samples Number of samples using in the averaging mode. - Supports the list of number of samples: + + Supports the list of number of samples: + 1, 4, 16, 64, 128, 256, 512, 1024 +======================= ======================================================= diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87 index fff6f6bf55bc..2d83f23bee93 100644 --- a/Documentation/hwmon/it87 +++ b/Documentation/hwmon/it87 @@ -2,105 +2,179 @@ Kernel driver it87 ================== Supported chips: + * IT8603E/IT8623E + Prefix: 'it8603' + Addresses scanned: from Super I/O config space (8 I/O ports) + Datasheet: Not publicly available + * IT8620E + Prefix: 'it8620' + Addresses scanned: from Super I/O config space (8 I/O ports) + * IT8628E + Prefix: 'it8628' + Addresses scanned: from Super I/O config space (8 I/O ports) + Datasheet: Not publicly available + * IT8705F + Prefix: 'it87' + Addresses scanned: from Super I/O config space (8 I/O ports) + Datasheet: Once publicly available at the ITE website, but no longer + * IT8712F + Prefix: 'it8712' + Addresses scanned: from Super I/O config space (8 I/O ports) + Datasheet: Once publicly available at the ITE website, but no longer + * IT8716F/IT8726F + Prefix: 'it8716' + Addresses scanned: from Super I/O config space (8 I/O ports) + Datasheet: Once publicly available at the ITE website, but no longer + * IT8718F + Prefix: 'it8718' + Addresses scanned: from Super I/O config space (8 I/O ports) + Datasheet: Once publicly available at the ITE website, but no longer + * IT8720F + Prefix: 'it8720' + Addresses scanned: from Super I/O config space (8 I/O ports) + Datasheet: Not publicly available + * IT8721F/IT8758E + Prefix: 'it8721' + Addresses scanned: from Super I/O config space (8 I/O ports) + Datasheet: Not publicly available + * IT8728F + Prefix: 'it8728' + Addresses scanned: from Super I/O config space (8 I/O ports) + Datasheet: Not publicly available + * IT8732F + Prefix: 'it8732' + Addresses scanned: from Super I/O config space (8 I/O ports) + Datasheet: Not publicly available + * IT8771E + Prefix: 'it8771' + Addresses scanned: from Super I/O config space (8 I/O ports) + Datasheet: Not publicly available + * IT8772E + Prefix: 'it8772' + Addresses scanned: from Super I/O config space (8 I/O ports) + Datasheet: Not publicly available + * IT8781F + Prefix: 'it8781' + Addresses scanned: from Super I/O config space (8 I/O ports) + Datasheet: Not publicly available + * IT8782F + Prefix: 'it8782' + Addresses scanned: from Super I/O config space (8 I/O ports) + Datasheet: Not publicly available + * IT8783E/F + Prefix: 'it8783' + Addresses scanned: from Super I/O config space (8 I/O ports) + Datasheet: Not publicly available + * IT8786E + Prefix: 'it8786' + Addresses scanned: from Super I/O config space (8 I/O ports) + Datasheet: Not publicly available + * IT8790E + Prefix: 'it8790' + Addresses scanned: from Super I/O config space (8 I/O ports) + Datasheet: Not publicly available + * SiS950 [clone of IT8705F] + Prefix: 'it87' + Addresses scanned: from Super I/O config space (8 I/O ports) + Datasheet: No longer be available + Authors: - Christophe Gauthron - Jean Delvare + - Christophe Gauthron + - Jean Delvare Module Parameters ----------------- * update_vbat: int - - 0 if vbat should report power on value, 1 if vbat should be updated after - each read. Default is 0. On some boards the battery voltage is provided - by either the battery or the onboard power supply. Only the first reading - at power on will be the actual battery voltage (which the chip does - automatically). On other boards the battery voltage is always fed to - the chip so can be read at any time. Excessive reading may decrease - battery life but no information is given in the datasheet. + 0 if vbat should report power on value, 1 if vbat should be updated after + each read. Default is 0. On some boards the battery voltage is provided + by either the battery or the onboard power supply. Only the first reading + at power on will be the actual battery voltage (which the chip does + automatically). On other boards the battery voltage is always fed to + the chip so can be read at any time. Excessive reading may decrease + battery life but no information is given in the datasheet. * fix_pwm_polarity int - - Force PWM polarity to active high (DANGEROUS). Some chips are - misconfigured by BIOS - PWM values would be inverted. This option tries - to fix this. Please contact your BIOS manufacturer and ask him for fix. + Force PWM polarity to active high (DANGEROUS). Some chips are + misconfigured by BIOS - PWM values would be inverted. This option tries + to fix this. Please contact your BIOS manufacturer and ask him for fix. Hardware Interfaces diff --git a/Documentation/hwmon/lineage-pem b/Documentation/hwmon/lineage-pem index 83b2ddc160c8..10c271dc20e8 100644 --- a/Documentation/hwmon/lineage-pem +++ b/Documentation/hwmon/lineage-pem @@ -2,11 +2,16 @@ Kernel driver lineage-pem ========================= Supported devices: + * Lineage Compact Power Line Power Entry Modules + Prefix: 'lineage-pem' + Addresses scanned: - + Documentation: - http://www.lineagepower.com/oem/pdf/CPLI2C.pdf + + http://www.lineagepower.com/oem/pdf/CPLI2C.pdf Author: Guenter Roeck @@ -31,9 +36,10 @@ which can be safely used to identify the chip. You will have to instantiate the devices explicitly. Example: the following will load the driver for a Lineage PEM at address 0x40 -on I2C bus #1: -$ modprobe lineage-pem -$ echo lineage-pem 0x40 > /sys/bus/i2c/devices/i2c-1/new_device +on I2C bus #1:: + + $ modprobe lineage-pem + $ echo lineage-pem 0x40 > /sys/bus/i2c/devices/i2c-1/new_device All Lineage CPL power entry modules have a built-in I2C bus master selector (PCA9541). To ensure device access, this driver should only be used as client @@ -51,6 +57,7 @@ Input voltage, input current, input power, and fan speed measurement is only supported on newer devices. The driver detects if those attributes are supported, and only creates respective sysfs entries if they are. +======================= =============================== in1_input Output voltage (mV) in1_min_alarm Output undervoltage alarm in1_max_alarm Output overvoltage alarm @@ -75,3 +82,4 @@ temp1_crit temp1_alarm temp1_crit_alarm temp1_fault +======================= =============================== diff --git a/Documentation/hwmon/lm63 b/Documentation/hwmon/lm63 index 4a00461512a6..f478132b0408 100644 --- a/Documentation/hwmon/lm63 +++ b/Documentation/hwmon/lm63 @@ -2,26 +2,43 @@ Kernel driver lm63 ================== Supported chips: + * National Semiconductor LM63 + Prefix: 'lm63' + Addresses scanned: I2C 0x4c + Datasheet: Publicly available at the National Semiconductor website - http://www.national.com/pf/LM/LM63.html + + http://www.national.com/pf/LM/LM63.html + * National Semiconductor LM64 + Prefix: 'lm64' + Addresses scanned: I2C 0x18 and 0x4e + Datasheet: Publicly available at the National Semiconductor website - http://www.national.com/pf/LM/LM64.html + + http://www.national.com/pf/LM/LM64.html + * National Semiconductor LM96163 + Prefix: 'lm96163' + Addresses scanned: I2C 0x4c + Datasheet: Publicly available at the National Semiconductor website - http://www.national.com/pf/LM/LM96163.html + + http://www.national.com/pf/LM/LM96163.html + Author: Jean Delvare Thanks go to Tyan and especially Alex Buckingham for setting up a remote access to their S4882 test platform for this driver. + http://www.tyan.com/ Description @@ -32,6 +49,7 @@ and control. The LM63 is basically an LM86 with fan speed monitoring and control capabilities added. It misses some of the LM86 features though: + - No low limit for local temperature. - No critical limit for local temperature. - Critical limit for remote temperature can be changed only once. We diff --git a/Documentation/hwmon/lm70 b/Documentation/hwmon/lm70 index c3a1f2ea017d..f259bc1fcd91 100644 --- a/Documentation/hwmon/lm70 +++ b/Documentation/hwmon/lm70 @@ -2,19 +2,30 @@ Kernel driver lm70 ================== Supported chips: + * National Semiconductor LM70 + Datasheet: http://www.national.com/pf/LM/LM70.html + * Texas Instruments TMP121/TMP123 + Information: http://focus.ti.com/docs/prod/folders/print/tmp121.html + * Texas Instruments TMP122/TMP124 + Information: http://www.ti.com/product/tmp122 + * National Semiconductor LM71 + Datasheet: http://www.ti.com/product/LM71 + * National Semiconductor LM74 + Datasheet: http://www.ti.com/product/LM74 + Author: - Kaiwan N Billimoria + Kaiwan N Billimoria Description ----------- diff --git a/Documentation/hwmon/lm73 b/Documentation/hwmon/lm73 index 8af059dcb642..1d6a46844e85 100644 --- a/Documentation/hwmon/lm73 +++ b/Documentation/hwmon/lm73 @@ -2,13 +2,20 @@ Kernel driver lm73 ================== Supported chips: + * Texas Instruments LM73 + Prefix: 'lm73' + Addresses scanned: I2C 0x48, 0x49, 0x4a, 0x4c, 0x4d, and 0x4e + Datasheet: Publicly available at the Texas Instruments website - http://www.ti.com/product/lm73 + + http://www.ti.com/product/lm73 + Author: Guillaume Ligneul + Documentation: Chris Verges @@ -29,17 +36,18 @@ conversion time via the 'update_interval' sysfs attribute for the device. This attribute will normalize ranges of input values to the maximum times defined for the resolution in the datasheet. + ============= ============= ============ Resolution Conv. Time Input Range (C/LSB) (msec) (msec) - -------------------------------------- + ============= ============= ============ 0.25 14 0..14 0.125 28 15..28 0.0625 56 29..56 0.03125 112 57..infinity - -------------------------------------- + ============= ============= ============ The following examples show how the 'update_interval' attribute can be -used to change the conversion time: +used to change the conversion time:: $ echo 0 > update_interval $ cat update_interval diff --git a/Documentation/hwmon/lm75 b/Documentation/hwmon/lm75 index 010583608f12..6fd4d2df5420 100644 --- a/Documentation/hwmon/lm75 +++ b/Documentation/hwmon/lm75 @@ -2,68 +2,130 @@ Kernel driver lm75 ================== Supported chips: + * National Semiconductor LM75 + Prefix: 'lm75' + Addresses scanned: I2C 0x48 - 0x4f + Datasheet: Publicly available at the National Semiconductor website - http://www.national.com/ + + http://www.national.com/ + * National Semiconductor LM75A + Prefix: 'lm75a' + Addresses scanned: I2C 0x48 - 0x4f + Datasheet: Publicly available at the National Semiconductor website - http://www.national.com/ + + http://www.national.com/ + * Dallas Semiconductor (now Maxim) DS75, DS1775, DS7505 + Prefixes: 'ds75', 'ds1775', 'ds7505' + Addresses scanned: none + Datasheet: Publicly available at the Maxim website - http://www.maximintegrated.com/ + + http://www.maximintegrated.com/ + * Maxim MAX6625, MAX6626, MAX31725, MAX31726 + Prefixes: 'max6625', 'max6626', 'max31725', 'max31726' + Addresses scanned: none + Datasheet: Publicly available at the Maxim website - http://www.maxim-ic.com/ + + http://www.maxim-ic.com/ + * Microchip (TelCom) TCN75 + Prefix: 'tcn75' + Addresses scanned: none + Datasheet: Publicly available at the Microchip website - http://www.microchip.com/ + + http://www.microchip.com/ + * Microchip MCP9800, MCP9801, MCP9802, MCP9803 + Prefix: 'mcp980x' + Addresses scanned: none + Datasheet: Publicly available at the Microchip website - http://www.microchip.com/ + + http://www.microchip.com/ + * Analog Devices ADT75 + Prefix: 'adt75' + Addresses scanned: none + Datasheet: Publicly available at the Analog Devices website - http://www.analog.com/adt75 + + http://www.analog.com/adt75 + * ST Microelectronics STDS75 + Prefix: 'stds75' + Addresses scanned: none + Datasheet: Publicly available at the ST website - http://www.st.com/internet/analog/product/121769.jsp + + http://www.st.com/internet/analog/product/121769.jsp + * ST Microelectronics STLM75 + Prefix: 'stlm75' + Addresses scanned: none + Datasheet: Publicly available at the ST website + https://www.st.com/resource/en/datasheet/stlm75.pdf + * Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, TMP75C, TMP175, TMP275 + Prefixes: 'tmp100', 'tmp101', 'tmp105', 'tmp112', 'tmp175', 'tmp75', 'tmp75c', 'tmp275' + Addresses scanned: none + Datasheet: Publicly available at the Texas Instruments website - http://www.ti.com/product/tmp100 - http://www.ti.com/product/tmp101 - http://www.ti.com/product/tmp105 - http://www.ti.com/product/tmp112 - http://www.ti.com/product/tmp75 - http://www.ti.com/product/tmp75c - http://www.ti.com/product/tmp175 - http://www.ti.com/product/tmp275 + + http://www.ti.com/product/tmp100 + + http://www.ti.com/product/tmp101 + + http://www.ti.com/product/tmp105 + + http://www.ti.com/product/tmp112 + + http://www.ti.com/product/tmp75 + + http://www.ti.com/product/tmp75c + + http://www.ti.com/product/tmp175 + + http://www.ti.com/product/tmp275 + * NXP LM75B + Prefix: 'lm75b' + Addresses scanned: none + Datasheet: Publicly available at the NXP website - http://www.nxp.com/documents/data_sheet/LM75B.pdf + + http://www.nxp.com/documents/data_sheet/LM75B.pdf Author: Frodo Looijaard diff --git a/Documentation/hwmon/lm77 b/Documentation/hwmon/lm77 index bfc915fe3639..4ed3fe6b999a 100644 --- a/Documentation/hwmon/lm77 +++ b/Documentation/hwmon/lm77 @@ -2,11 +2,17 @@ Kernel driver lm77 ================== Supported chips: + * National Semiconductor LM77 + Prefix: 'lm77' + Addresses scanned: I2C 0x48 - 0x4b + Datasheet: Publicly available at the National Semiconductor website - http://www.national.com/ + + http://www.national.com/ + Author: Andras BALI @@ -25,6 +31,7 @@ register on the chip, which means that the relative difference between the limit and its hysteresis is always the same for all 3 limits. This implementation detail implies the following: + * When setting a limit, its hysteresis will automatically follow, the difference staying unchanged. For example, if the old critical limit was 80 degrees C, and the hysteresis was 75 degrees C, and you change diff --git a/Documentation/hwmon/lm78 b/Documentation/hwmon/lm78 index 4dd47731789f..cb7a4832f35e 100644 --- a/Documentation/hwmon/lm78 +++ b/Documentation/hwmon/lm78 @@ -2,19 +2,31 @@ Kernel driver lm78 ================== Supported chips: - * National Semiconductor LM78 / LM78-J - Prefix: 'lm78' - Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports) - Datasheet: Publicly available at the National Semiconductor website - http://www.national.com/ - * National Semiconductor LM79 - Prefix: 'lm79' - Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports) - Datasheet: Publicly available at the National Semiconductor website - http://www.national.com/ -Authors: Frodo Looijaard - Jean Delvare + * National Semiconductor LM78 / LM78-J + + Prefix: 'lm78' + + Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports) + + Datasheet: Publicly available at the National Semiconductor website + + http://www.national.com/ + + * National Semiconductor LM79 + + Prefix: 'lm79' + + Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports) + + Datasheet: Publicly available at the National Semiconductor website + + http://www.national.com/ + + +Authors: + - Frodo Looijaard + - Jean Delvare Description ----------- diff --git a/Documentation/hwmon/lm80 b/Documentation/hwmon/lm80 index a60b43efc32b..c53186abd82e 100644 --- a/Documentation/hwmon/lm80 +++ b/Documentation/hwmon/lm80 @@ -2,20 +2,31 @@ Kernel driver lm80 ================== Supported chips: + * National Semiconductor LM80 + Prefix: 'lm80' + Addresses scanned: I2C 0x28 - 0x2f + Datasheet: Publicly available at the National Semiconductor website - http://www.national.com/ + + http://www.national.com/ + * National Semiconductor LM96080 + Prefix: 'lm96080' + Addresses scanned: I2C 0x28 - 0x2f + Datasheet: Publicly available at the National Semiconductor website - http://www.national.com/ + + http://www.national.com/ + Authors: - Frodo Looijaard , - Philip Edelbrock + - Frodo Looijaard , + - Philip Edelbrock Description ----------- diff --git a/Documentation/hwmon/lm83 b/Documentation/hwmon/lm83 index 50be5cb26de9..ecf83819960e 100644 --- a/Documentation/hwmon/lm83 +++ b/Documentation/hwmon/lm83 @@ -2,16 +2,24 @@ Kernel driver lm83 ================== Supported chips: - * National Semiconductor LM83 - Prefix: 'lm83' - Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - Datasheet: Publicly available at the National Semiconductor website - http://www.national.com/pf/LM/LM83.html - * National Semiconductor LM82 - Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - Datasheet: Publicly available at the National Semiconductor website - http://www.national.com/pf/LM/LM82.html + * National Semiconductor LM83 + + Prefix: 'lm83' + + Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e + + Datasheet: Publicly available at the National Semiconductor website + + http://www.national.com/pf/LM/LM83.html + + * National Semiconductor LM82 + + Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e + + Datasheet: Publicly available at the National Semiconductor website + + http://www.national.com/pf/LM/LM82.html Author: Jean Delvare @@ -34,13 +42,17 @@ fact that any of these motherboards do actually have an LM83, please contact us. Note that the LM90 can easily be misdetected as a LM83. Confirmed motherboards: + === ===== SBS P014 SBS PSL09 + === ===== Unconfirmed motherboards: + =========== ========== Gigabyte GA-8IK1100 Iwill MPX2 Soltek SL-75DRV5 + =========== ========== The LM82 is confirmed to have been found on most AMD Geode reference designs and test platforms. diff --git a/Documentation/hwmon/lm85 b/Documentation/hwmon/lm85 index 2329c383efe4..faa92f54431c 100644 --- a/Documentation/hwmon/lm85 +++ b/Documentation/hwmon/lm85 @@ -2,49 +2,85 @@ Kernel driver lm85 ================== Supported chips: + * National Semiconductor LM85 (B and C versions) + Prefix: 'lm85b' or 'lm85c' + Addresses scanned: I2C 0x2c, 0x2d, 0x2e + Datasheet: http://www.national.com/pf/LM/LM85.html + * Texas Instruments LM96000 + Prefix: 'lm9600' + Addresses scanned: I2C 0x2c, 0x2d, 0x2e + Datasheet: http://www.ti.com/lit/ds/symlink/lm96000.pdf + * Analog Devices ADM1027 + Prefix: 'adm1027' + Addresses scanned: I2C 0x2c, 0x2d, 0x2e + Datasheet: http://www.onsemi.com/PowerSolutions/product.do?id=ADM1027 + * Analog Devices ADT7463 + Prefix: 'adt7463' + Addresses scanned: I2C 0x2c, 0x2d, 0x2e + Datasheet: http://www.onsemi.com/PowerSolutions/product.do?id=ADT7463 + * Analog Devices ADT7468 + Prefix: 'adt7468' + Addresses scanned: I2C 0x2c, 0x2d, 0x2e + Datasheet: http://www.onsemi.com/PowerSolutions/product.do?id=ADT7468 + * SMSC EMC6D100, SMSC EMC6D101 + Prefix: 'emc6d100' + Addresses scanned: I2C 0x2c, 0x2d, 0x2e - Datasheet: http://www.smsc.com/media/Downloads_Public/discontinued/6d100.pdf + + Datasheet: http://www.smsc.com/media/Downloads_Public/discontinued/6d100.pdf + * SMSC EMC6D102 + Prefix: 'emc6d102' + Addresses scanned: I2C 0x2c, 0x2d, 0x2e + Datasheet: http://www.smsc.com/main/catalog/emc6d102.html + * SMSC EMC6D103 + Prefix: 'emc6d103' + Addresses scanned: I2C 0x2c, 0x2d, 0x2e + Datasheet: http://www.smsc.com/main/catalog/emc6d103.html + * SMSC EMC6D103S + Prefix: 'emc6d103s' + Addresses scanned: I2C 0x2c, 0x2d, 0x2e + Datasheet: http://www.smsc.com/main/catalog/emc6d103s.html Authors: - Philip Pokorny , - Frodo Looijaard , - Richard Barrington , - Margit Schubert-While , - Justin Thiessen + - Philip Pokorny , + - Frodo Looijaard , + - Richard Barrington , + - Margit Schubert-While , + - Justin Thiessen Description ----------- @@ -177,38 +213,50 @@ Each temperature sensor is associated with a Zone. There are three sensors and therefore three zones (# 1, 2 and 3). Each zone has the following temperature configuration points: -* temp#_auto_temp_off - temperature below which fans should be off or spinning very low. -* temp#_auto_temp_min - temperature over which fans start to spin. -* temp#_auto_temp_max - temperature when fans spin at full speed. -* temp#_auto_temp_crit - temperature when all fans will run full speed. +* temp#_auto_temp_off + - temperature below which fans should be off or spinning very low. +* temp#_auto_temp_min + - temperature over which fans start to spin. +* temp#_auto_temp_max + - temperature when fans spin at full speed. +* temp#_auto_temp_crit + - temperature when all fans will run full speed. -* PWM Control +PWM Control +^^^^^^^^^^^ There are three PWM outputs. The LM85 datasheet suggests that the pwm3 output control both fan3 and fan4. Each PWM can be individually configured and assigned to a zone for its control value. Each PWM can be configured individually according to the following options. -* pwm#_auto_pwm_min - this specifies the PWM value for temp#_auto_temp_off - temperature. (PWM value from 0 to 255) +* pwm#_auto_pwm_min + - this specifies the PWM value for temp#_auto_temp_off + temperature. (PWM value from 0 to 255) -* pwm#_auto_pwm_minctl - this flags selects for temp#_auto_temp_off temperature - the behaviour of fans. Write 1 to let fans spinning at - pwm#_auto_pwm_min or write 0 to let them off. +* pwm#_auto_pwm_minctl + - this flags selects for temp#_auto_temp_off temperature + the behaviour of fans. Write 1 to let fans spinning at + pwm#_auto_pwm_min or write 0 to let them off. -NOTE: It has been reported that there is a bug in the LM85 that causes the flag -to be associated with the zones not the PWMs. This contradicts all the -published documentation. Setting pwm#_min_ctl in this case actually affects all -PWMs controlled by zone '#'. +.. note:: -* PWM Controlling Zone selection + It has been reported that there is a bug in the LM85 that causes + the flag to be associated with the zones not the PWMs. This + contradicts all the published documentation. Setting pwm#_min_ctl + in this case actually affects all PWMs controlled by zone '#'. -* pwm#_auto_channels - controls zone that is associated with PWM +PWM Controlling Zone selection +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +* pwm#_auto_channels + - controls zone that is associated with PWM Configuration choices: - Value Meaning - ------ ------------------------------------------------ +========== ============================================= +Value Meaning +========== ============================================= 1 Controlled by Zone 1 2 Controlled by Zone 2 3 Controlled by Zone 3 @@ -217,6 +265,7 @@ Configuration choices: 0 PWM always 0% (off) -1 PWM always 100% (full on) -2 Manual control (write to 'pwm#' to set) +========== ============================================= The National LM85's have two vendor specific configuration features. Tach. mode and Spinup Control. For more details on these, diff --git a/Documentation/hwmon/lm87 b/Documentation/hwmon/lm87 index a2339fd9acb9..72fcb577ef2a 100644 --- a/Documentation/hwmon/lm87 +++ b/Documentation/hwmon/lm87 @@ -2,23 +2,32 @@ Kernel driver lm87 ================== Supported chips: + * National Semiconductor LM87 + Prefix: 'lm87' + Addresses scanned: I2C 0x2c - 0x2e + Datasheet: http://www.national.com/pf/LM/LM87.html + * Analog Devices ADM1024 + Prefix: 'adm1024' + Addresses scanned: I2C 0x2c - 0x2e + Datasheet: http://www.analog.com/en/prod/0,2877,ADM1024,00.html + Authors: - Frodo Looijaard , - Philip Edelbrock , - Mark Studebaker , - Stephen Rousset , - Dan Eaton , - Jean Delvare , - Original 2.6 port Jeff Oliver + - Frodo Looijaard , + - Philip Edelbrock , + - Mark Studebaker , + - Stephen Rousset , + - Dan Eaton , + - Jean Delvare , + - Original 2.6 port Jeff Oliver Description ----------- diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90 index 8122675d30f6..953315987c06 100644 --- a/Documentation/hwmon/lm90 +++ b/Documentation/hwmon/lm90 @@ -2,132 +2,256 @@ Kernel driver lm90 ================== Supported chips: - * National Semiconductor LM90 - Prefix: 'lm90' - Addresses scanned: I2C 0x4c - Datasheet: Publicly available at the National Semiconductor website - http://www.national.com/pf/LM/LM90.html - * National Semiconductor LM89 - Prefix: 'lm89' (no auto-detection) - Addresses scanned: I2C 0x4c and 0x4d - Datasheet: Publicly available at the National Semiconductor website - http://www.national.com/mpf/LM/LM89.html - * National Semiconductor LM99 - Prefix: 'lm99' - Addresses scanned: I2C 0x4c and 0x4d - Datasheet: Publicly available at the National Semiconductor website - http://www.national.com/pf/LM/LM99.html - * National Semiconductor LM86 - Prefix: 'lm86' - Addresses scanned: I2C 0x4c - Datasheet: Publicly available at the National Semiconductor website - http://www.national.com/mpf/LM/LM86.html - * Analog Devices ADM1032 - Prefix: 'adm1032' - Addresses scanned: I2C 0x4c and 0x4d - Datasheet: Publicly available at the ON Semiconductor website - http://www.onsemi.com/PowerSolutions/product.do?id=ADM1032 - * Analog Devices ADT7461 - Prefix: 'adt7461' - Addresses scanned: I2C 0x4c and 0x4d - Datasheet: Publicly available at the ON Semiconductor website - http://www.onsemi.com/PowerSolutions/product.do?id=ADT7461 - * Analog Devices ADT7461A - Prefix: 'adt7461a' - Addresses scanned: I2C 0x4c and 0x4d - Datasheet: Publicly available at the ON Semiconductor website - http://www.onsemi.com/PowerSolutions/product.do?id=ADT7461A - * ON Semiconductor NCT1008 - Prefix: 'nct1008' - Addresses scanned: I2C 0x4c and 0x4d - Datasheet: Publicly available at the ON Semiconductor website - http://www.onsemi.com/PowerSolutions/product.do?id=NCT1008 - * Maxim MAX6646 - Prefix: 'max6646' - Addresses scanned: I2C 0x4d - Datasheet: Publicly available at the Maxim website - http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497 - * Maxim MAX6647 - Prefix: 'max6646' - Addresses scanned: I2C 0x4e - Datasheet: Publicly available at the Maxim website - http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497 - * Maxim MAX6648 - Prefix: 'max6646' - Addresses scanned: I2C 0x4c - Datasheet: Publicly available at the Maxim website - http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500 - * Maxim MAX6649 - Prefix: 'max6646' - Addresses scanned: I2C 0x4c - Datasheet: Publicly available at the Maxim website - http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497 - * Maxim MAX6657 - Prefix: 'max6657' - Addresses scanned: I2C 0x4c - Datasheet: Publicly available at the Maxim website - http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578 - * Maxim MAX6658 - Prefix: 'max6657' - Addresses scanned: I2C 0x4c - Datasheet: Publicly available at the Maxim website - http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578 - * Maxim MAX6659 - Prefix: 'max6659' - Addresses scanned: I2C 0x4c, 0x4d, 0x4e - Datasheet: Publicly available at the Maxim website - http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578 - * Maxim MAX6680 - Prefix: 'max6680' - Addresses scanned: I2C 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, - 0x4c, 0x4d and 0x4e - Datasheet: Publicly available at the Maxim website - http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3370 - * Maxim MAX6681 - Prefix: 'max6680' - Addresses scanned: I2C 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, - 0x4c, 0x4d and 0x4e - Datasheet: Publicly available at the Maxim website - http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3370 - * Maxim MAX6692 - Prefix: 'max6646' - Addresses scanned: I2C 0x4c - Datasheet: Publicly available at the Maxim website - http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500 - * Maxim MAX6695 - Prefix: 'max6695' - Addresses scanned: I2C 0x18 - Datasheet: Publicly available at the Maxim website - http://www.maxim-ic.com/datasheet/index.mvp/id/4199 - * Maxim MAX6696 - Prefix: 'max6695' - Addresses scanned: I2C 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, - 0x4c, 0x4d and 0x4e - Datasheet: Publicly available at the Maxim website - http://www.maxim-ic.com/datasheet/index.mvp/id/4199 - * Winbond/Nuvoton W83L771W/G - Prefix: 'w83l771' - Addresses scanned: I2C 0x4c - Datasheet: No longer available - * Winbond/Nuvoton W83L771AWG/ASG - Prefix: 'w83l771' - Addresses scanned: I2C 0x4c - Datasheet: Not publicly available, can be requested from Nuvoton - * Philips/NXP SA56004X - Prefix: 'sa56004' - Addresses scanned: I2C 0x48 through 0x4F - Datasheet: Publicly available at NXP website - http://ics.nxp.com/products/interface/datasheet/sa56004x.pdf - * GMT G781 - Prefix: 'g781' - Addresses scanned: I2C 0x4c, 0x4d - Datasheet: Not publicly available from GMT - * Texas Instruments TMP451 - Prefix: 'tmp451' - Addresses scanned: I2C 0x4c - Datasheet: Publicly available at TI website - http://www.ti.com/litv/pdf/sbos686 + * National Semiconductor LM90 + + Prefix: 'lm90' + + Addresses scanned: I2C 0x4c + + Datasheet: Publicly available at the National Semiconductor website + + http://www.national.com/pf/LM/LM90.html + + * National Semiconductor LM89 + + Prefix: 'lm89' (no auto-detection) + + Addresses scanned: I2C 0x4c and 0x4d + + Datasheet: Publicly available at the National Semiconductor website + + http://www.national.com/mpf/LM/LM89.html + + * National Semiconductor LM99 + + Prefix: 'lm99' + + Addresses scanned: I2C 0x4c and 0x4d + + Datasheet: Publicly available at the National Semiconductor website + + http://www.national.com/pf/LM/LM99.html + + * National Semiconductor LM86 + + Prefix: 'lm86' + + Addresses scanned: I2C 0x4c + + Datasheet: Publicly available at the National Semiconductor website + + http://www.national.com/mpf/LM/LM86.html + + * Analog Devices ADM1032 + + Prefix: 'adm1032' + + Addresses scanned: I2C 0x4c and 0x4d + + Datasheet: Publicly available at the ON Semiconductor website + + http://www.onsemi.com/PowerSolutions/product.do?id=ADM1032 + + * Analog Devices ADT7461 + + Prefix: 'adt7461' + + Addresses scanned: I2C 0x4c and 0x4d + + Datasheet: Publicly available at the ON Semiconductor website + + http://www.onsemi.com/PowerSolutions/product.do?id=ADT7461 + + * Analog Devices ADT7461A + + Prefix: 'adt7461a' + + Addresses scanned: I2C 0x4c and 0x4d + + Datasheet: Publicly available at the ON Semiconductor website + + http://www.onsemi.com/PowerSolutions/product.do?id=ADT7461A + + * ON Semiconductor NCT1008 + + Prefix: 'nct1008' + + Addresses scanned: I2C 0x4c and 0x4d + + Datasheet: Publicly available at the ON Semiconductor website + + http://www.onsemi.com/PowerSolutions/product.do?id=NCT1008 + + * Maxim MAX6646 + + Prefix: 'max6646' + + Addresses scanned: I2C 0x4d + + Datasheet: Publicly available at the Maxim website + + http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497 + + * Maxim MAX6647 + + Prefix: 'max6646' + + Addresses scanned: I2C 0x4e + + Datasheet: Publicly available at the Maxim website + + http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497 + + * Maxim MAX6648 + + Prefix: 'max6646' + + Addresses scanned: I2C 0x4c + + Datasheet: Publicly available at the Maxim website + + http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500 + + * Maxim MAX6649 + + Prefix: 'max6646' + + Addresses scanned: I2C 0x4c + + Datasheet: Publicly available at the Maxim website + + http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497 + + * Maxim MAX6657 + + Prefix: 'max6657' + + Addresses scanned: I2C 0x4c + + Datasheet: Publicly available at the Maxim website + + http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578 + + * Maxim MAX6658 + + Prefix: 'max6657' + + Addresses scanned: I2C 0x4c + + Datasheet: Publicly available at the Maxim website + + http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578 + + * Maxim MAX6659 + + Prefix: 'max6659' + + Addresses scanned: I2C 0x4c, 0x4d, 0x4e + + Datasheet: Publicly available at the Maxim website + + http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578 + + * Maxim MAX6680 + + Prefix: 'max6680' + + Addresses scanned: I2C 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, + + 0x4c, 0x4d and 0x4e + + Datasheet: Publicly available at the Maxim website + + http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3370 + + * Maxim MAX6681 + + Prefix: 'max6680' + + Addresses scanned: I2C 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, + + 0x4c, 0x4d and 0x4e + + Datasheet: Publicly available at the Maxim website + + http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3370 + + * Maxim MAX6692 + + Prefix: 'max6646' + + Addresses scanned: I2C 0x4c + + Datasheet: Publicly available at the Maxim website + + http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500 + + * Maxim MAX6695 + + Prefix: 'max6695' + + Addresses scanned: I2C 0x18 + + Datasheet: Publicly available at the Maxim website + + http://www.maxim-ic.com/datasheet/index.mvp/id/4199 + + * Maxim MAX6696 + + Prefix: 'max6695' + + Addresses scanned: I2C 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, + + 0x4c, 0x4d and 0x4e + + Datasheet: Publicly available at the Maxim website + + http://www.maxim-ic.com/datasheet/index.mvp/id/4199 + + * Winbond/Nuvoton W83L771W/G + + Prefix: 'w83l771' + + Addresses scanned: I2C 0x4c + + Datasheet: No longer available + + * Winbond/Nuvoton W83L771AWG/ASG + + Prefix: 'w83l771' + + Addresses scanned: I2C 0x4c + + Datasheet: Not publicly available, can be requested from Nuvoton + + * Philips/NXP SA56004X + + Prefix: 'sa56004' + + Addresses scanned: I2C 0x48 through 0x4F + + Datasheet: Publicly available at NXP website + + http://ics.nxp.com/products/interface/datasheet/sa56004x.pdf + + * GMT G781 + + Prefix: 'g781' + + Addresses scanned: I2C 0x4c, 0x4d + + Datasheet: Not publicly available from GMT + + * Texas Instruments TMP451 + + Prefix: 'tmp451' + + Addresses scanned: I2C 0x4c + + Datasheet: Publicly available at TI website + + http://www.ti.com/litv/pdf/sbos686 Author: Jean Delvare diff --git a/Documentation/hwmon/lm92 b/Documentation/hwmon/lm92 index cfa99a353b8c..c131b923ed36 100644 --- a/Documentation/hwmon/lm92 +++ b/Documentation/hwmon/lm92 @@ -2,22 +2,35 @@ Kernel driver lm92 ================== Supported chips: + * National Semiconductor LM92 + Prefix: 'lm92' + Addresses scanned: I2C 0x48 - 0x4b + Datasheet: http://www.national.com/pf/LM/LM92.html + * National Semiconductor LM76 + Prefix: 'lm92' + Addresses scanned: none, force parameter needed + Datasheet: http://www.national.com/pf/LM/LM76.html + * Maxim MAX6633/MAX6634/MAX6635 + Prefix: 'max6635' + Addresses scanned: none, force parameter needed + Datasheet: http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3074 + Authors: - Abraham van der Merwe - Jean Delvare + - Abraham van der Merwe + - Jean Delvare Description diff --git a/Documentation/hwmon/lm93 b/Documentation/hwmon/lm93 index f3b2ad2ceb01..49d199b45b67 100644 --- a/Documentation/hwmon/lm93 +++ b/Documentation/hwmon/lm93 @@ -2,20 +2,29 @@ Kernel driver lm93 ================== Supported chips: + * National Semiconductor LM93 + Prefix 'lm93' + Addresses scanned: I2C 0x2c-0x2e + Datasheet: http://www.national.com/ds.cgi/LM/LM93.pdf + * National Semiconductor LM94 + Prefix 'lm94' + Addresses scanned: I2C 0x2c-0x2e + Datasheet: http://www.national.com/ds.cgi/LM/LM94.pdf + Authors: - Mark M. Hoffman - Ported to 2.6 by Eric J. Bowersox - Adapted to 2.6.20 by Carsten Emde - Modified for mainline integration by Hans J. Koch + - Mark M. Hoffman + - Ported to 2.6 by Eric J. Bowersox + - Adapted to 2.6.20 by Carsten Emde + - Modified for mainline integration by Hans J. Koch Module Parameters ----------------- @@ -67,7 +76,8 @@ LM94 are not supported. User Interface -------------- -#PROCHOT: +#PROCHOT +^^^^^^^^ The LM93 can monitor two #PROCHOT signals. The results are found in the sysfs files prochot1, prochot2, prochot1_avg, prochot2_avg, prochot1_max, @@ -86,7 +96,8 @@ prochot2_interval. The values in these files specify the intervals for list will cause the driver to use the next largest interval. The available intervals are (in seconds): -#PROCHOT intervals: 0.73, 1.46, 2.9, 5.8, 11.7, 23.3, 46.6, 93.2, 186, 372 +#PROCHOT intervals: + 0.73, 1.46, 2.9, 5.8, 11.7, 23.3, 46.6, 93.2, 186, 372 It is possible to configure the LM93 to logically short the two #PROCHOT signals. I.e. when #P1_PROCHOT is asserted, the LM93 will automatically @@ -105,16 +116,15 @@ contains a value controlling the duty cycle for the PWM signal used when the override function is enabled. This value ranges from 0 to 15, with 0 indicating minimum duty cycle and 15 indicating maximum. -#VRD_HOT: +#VRD_HOT +^^^^^^^^ The LM93 can monitor two #VRD_HOT signals. The results are found in the sysfs files vrdhot1 and vrdhot2. There is one value per file: a boolean for which 1 indicates #VRD_HOT is asserted and 0 indicates it is negated. These files are read-only. -Smart Tach Mode: - -(from the datasheet) +Smart Tach Mode (from the datasheet):: If a fan is driven using a low-side drive PWM, the tachometer output of the fan is corrupted. The LM93 includes smart tachometer @@ -127,7 +137,8 @@ the fan tachometer with a pwm) to the sysfs file fan_smart_tach. A zero will disable the function for that fan. Note that Smart tach mode cannot be enabled if the PWM output frequency is 22500 Hz (see below). -Manual PWM: +Manual PWM +^^^^^^^^^^ The LM93 has a fixed or override mode for the two PWM outputs (although, there are still some conditions that will override even this mode - see section @@ -141,7 +152,8 @@ will cause the driver to use the next largest value. Also note: when manual PWM mode is disabled, the value of pwm1 and pwm2 indicates the current duty cycle chosen by the h/w. -PWM Output Frequency: +PWM Output Frequency +^^^^^^^^^^^^^^^^^^^^ The LM93 supports several different frequencies for the PWM output channels. The sysfs files pwm1_freq and pwm2_freq are used to select the frequency. The @@ -149,9 +161,11 @@ frequency values are constrained by the hardware. Selecting a value which is not available will cause the driver to use the next largest value. Also note that this parameter has implications for the Smart Tach Mode (see above). -PWM Output Frequencies (in Hz): 12, 36, 48, 60, 72, 84, 96, 22500 (default) +PWM Output Frequencies (in Hz): + 12, 36, 48, 60, 72, 84, 96, 22500 (default) -Automatic PWM: +Automatic PWM +^^^^^^^^^^^^^ The LM93 is capable of complex automatic fan control, with many different points of configuration. To start, each PWM output can be bound to any @@ -163,14 +177,16 @@ The eight control sources are: temp1-temp4 (aka "zones" in the datasheet), in the sysfs files pwm_auto_channels, where a "1" enables the binding, and a "0" disables it. The h/w default is 0x0f (all temperatures bound). - 0x01 - Temp 1 - 0x02 - Temp 2 - 0x04 - Temp 3 - 0x08 - Temp 4 - 0x10 - #PROCHOT 1 - 0x20 - #PROCHOT 2 - 0x40 - #VRDHOT 1 - 0x80 - #VRDHOT 2 + ====== =========== + 0x01 Temp 1 + 0x02 Temp 2 + 0x04 Temp 3 + 0x08 Temp 4 + 0x10 #PROCHOT 1 + 0x20 #PROCHOT 2 + 0x40 #VRDHOT 1 + 0x80 #VRDHOT 2 + ====== =========== The function y = f(x) takes a source temperature x to a PWM output y. This function of the LM93 is derived from a base temperature and a table of 12 @@ -180,7 +196,9 @@ degrees C, with the value of offset for temperature value being contained in the file temp_auto_offset. E.g. if the base temperature is 40C: + ========== ======================= =============== ======= offset # temp_auto_offset range pwm + ========== ======================= =============== ======= 1 0 - 25.00% 2 0 - 28.57% 3 1 40C - 41C 32.14% @@ -193,7 +211,8 @@ is 40C: 10 2 54C - 56C 57.14% 11 2 56C - 58C 71.43% 12 2 58C - 60C 85.71% - > 60C 100.00% + - - > 60C 100.00% + ========== ======================= =============== ======= Valid offsets are in the range 0C <= x <= 7.5C in 0.5C increments. @@ -213,7 +232,8 @@ temp_auto_pwm_min. Note, there are only two minimums: one each for temp[12] and temp[34]. Therefore, any change to e.g. temp1_auto_pwm_min will also affect temp2_auto_pwm_min. -PWM Spin-Up Cycle: +PWM Spin-Up Cycle +^^^^^^^^^^^^^^^^^ A spin-up cycle occurs when a PWM output is commanded from 0% duty cycle to some value > 0%. The LM93 supports a minimum duty cycle during spin-up. These @@ -225,10 +245,11 @@ the spin-up time in seconds. The available spin-up times are constrained by the hardware. Selecting a value which is not available will cause the driver to use the next largest value. -Spin-up Durations: 0 (disabled, h/w default), 0.1, 0.25, 0.4, 0.7, 1.0, - 2.0, 4.0 +Spin-up Durations: + 0 (disabled, h/w default), 0.1, 0.25, 0.4, 0.7, 1.0, 2.0, 4.0 -#PROCHOT and #VRDHOT PWM Ramping: +#PROCHOT and #VRDHOT PWM Ramping +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ If the #PROCHOT or #VRDHOT signals are asserted while bound to a PWM output channel, the LM93 will ramp the PWM output up to 100% duty cycle in discrete @@ -237,9 +258,11 @@ one value each in seconds: pwm_auto_prochot_ramp and pwm_auto_vrdhot_ramp. The available ramp times are constrained by the hardware. Selecting a value which is not available will cause the driver to use the next largest value. -Ramp Times: 0 (disabled, h/w default) to 0.75 in 0.05 second intervals +Ramp Times: + 0 (disabled, h/w default) to 0.75 in 0.05 second intervals -Fan Boost: +Fan Boost +^^^^^^^^^ For each temperature channel, there is a boost temperature: if the channel exceeds this limit, the LM93 will immediately drive both PWM outputs to 100%. @@ -249,7 +272,8 @@ limit is reached, the temperature channel must drop below this value before the boost function is disabled. This temperature is also expressed in degrees C in the sysfs files temp_auto_boost_hyst. -GPIO Pins: +GPIO Pins +^^^^^^^^^ The LM93 can monitor the logic level of four dedicated GPIO pins as well as the four tach input pins. GPIO0-GPIO3 correspond to (fan) tach 1-4, respectively. @@ -260,50 +284,29 @@ LSB is GPIO0, and the MSB is GPIO7. LM93 Unique sysfs Files ----------------------- - file description - ------------------------------------------------------------- - - prochot current #PROCHOT % - - prochot_avg moving average #PROCHOT % - - prochot_max limit #PROCHOT % - - prochot_short enable or disable logical #PROCHOT pin short - - prochot_override force #PROCHOT assertion as PWM - - prochot_override_duty_cycle - duty cycle for the PWM signal used when - #PROCHOT is overridden - - prochot_interval #PROCHOT PWM sampling interval - - vrdhot 0 means negated, 1 means asserted - - fan_smart_tach enable or disable smart tach mode - - pwm_auto_channels select control sources for PWM outputs - - pwm_auto_spinup_min minimum duty cycle during spin-up - - pwm_auto_spinup_time duration of spin-up - - pwm_auto_prochot_ramp ramp time per step when #PROCHOT asserted - - pwm_auto_vrdhot_ramp ramp time per step when #VRDHOT asserted - - temp_auto_base temperature channel base - - temp_auto_offset[1-12] - temperature channel offsets - - temp_auto_offset_hyst - temperature channel offset hysteresis - - temp_auto_boost temperature channel boost (PWMs to 100%) limit - - temp_auto_boost_hyst temperature channel boost hysteresis - - gpio input state of 8 GPIO pins; read-only - +=========================== =============================================== +file description +=========================== =============================================== +prochot current #PROCHOT % +prochot_avg moving average #PROCHOT % +prochot_max limit #PROCHOT % +prochot_short enable or disable logical #PROCHOT pin short +prochot_override force #PROCHOT assertion as PWM +prochot_override_duty_cycle duty cycle for the PWM signal used when + #PROCHOT is overridden +prochot_interval #PROCHOT PWM sampling interval +vrdhot 0 means negated, 1 means asserted +fan_smart_tach enable or disable smart tach mode +pwm_auto_channels select control sources for PWM outputs +pwm_auto_spinup_min minimum duty cycle during spin-up +pwm_auto_spinup_time duration of spin-up +pwm_auto_prochot_ramp ramp time per step when #PROCHOT asserted +pwm_auto_vrdhot_ramp ramp time per step when #VRDHOT asserted +temp_auto_base temperature channel base +temp_auto_offset[1-12] temperature channel offsets +temp_auto_offset_hyst temperature channel offset hysteresis +temp_auto_boost temperature channel boost (PWMs to 100%) + limit +temp_auto_boost_hyst temperature channel boost hysteresis +gpio input state of 8 GPIO pins; read-only +=========================== =============================================== diff --git a/Documentation/hwmon/lm95245 b/Documentation/hwmon/lm95245 index d755901f58c4..566d1dc8c5a6 100644 --- a/Documentation/hwmon/lm95245 +++ b/Documentation/hwmon/lm95245 @@ -1,16 +1,23 @@ Kernel driver lm95245 -================== +===================== Supported chips: - * TI LM95235 - Addresses scanned: I2C 0x18, 0x29, 0x4c - Datasheet: Publicly available at the TI website - http://www.ti.com/lit/ds/symlink/lm95235.pdf - * TI / National Semiconductor LM95245 - Addresses scanned: I2C 0x18, 0x19, 0x29, 0x4c, 0x4d - Datasheet: Publicly available at the TI website - http://www.ti.com/lit/ds/symlink/lm95245.pdf + * TI LM95235 + + Addresses scanned: I2C 0x18, 0x29, 0x4c + + Datasheet: Publicly available at the TI website + + http://www.ti.com/lit/ds/symlink/lm95235.pdf + + * TI / National Semiconductor LM95245 + + Addresses scanned: I2C 0x18, 0x19, 0x29, 0x4c, 0x4d + + Datasheet: Publicly available at the TI website + + http://www.ti.com/lit/ds/symlink/lm95245.pdf Author: Alexander Stein diff --git a/Documentation/hwmon/ltc2945 b/Documentation/hwmon/ltc2945 index f8d0f7f19adb..20c884985367 100644 --- a/Documentation/hwmon/ltc2945 +++ b/Documentation/hwmon/ltc2945 @@ -2,11 +2,16 @@ Kernel driver ltc2945 ===================== Supported chips: + * Linear Technology LTC2945 + Prefix: 'ltc2945' + Addresses scanned: - + Datasheet: - http://cds.linear.com/docs/en/datasheet/2945fa.pdf + + http://cds.linear.com/docs/en/datasheet/2945fa.pdf Author: Guenter Roeck @@ -26,9 +31,10 @@ which can be safely used to identify the chip. You will have to instantiate the devices explicitly. Example: the following will load the driver for an LTC2945 at address 0x10 -on I2C bus #1: -$ modprobe ltc2945 -$ echo ltc2945 0x10 > /sys/bus/i2c/devices/i2c-1/new_device +on I2C bus #1:: + + $ modprobe ltc2945 + $ echo ltc2945 0x10 > /sys/bus/i2c/devices/i2c-1/new_device Sysfs entries @@ -45,6 +51,7 @@ Current Sense register. The reported value assumes that a 1 mOhm sense resistor is installed. If a different sense resistor is installed, calculate the real current by dividing the reported value by the sense resistor value in mOhm. +======================= ======================================================== in1_input VIN voltage (mV). Voltage is measured either at SENSE+ or VDD pin depending on chip configuration. in1_min Undervoltage threshold @@ -82,3 +89,4 @@ power1_input_highest Historical maximum power use power1_reset_history Write 1 to reset power1 history power1_min_alarm Low power alarm power1_max_alarm High power alarm +======================= ======================================================== diff --git a/Documentation/hwmon/ltc2990 b/Documentation/hwmon/ltc2990 index 3ed68f676c0f..e0a369e679d3 100644 --- a/Documentation/hwmon/ltc2990 +++ b/Documentation/hwmon/ltc2990 @@ -1,14 +1,23 @@ Kernel driver ltc2990 ===================== + Supported chips: + * Linear Technology LTC2990 + Prefix: 'ltc2990' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltc2990 -Author: Mike Looijmans - Tom Levens + + +Author: + + - Mike Looijmans + - Tom Levens Description @@ -31,17 +40,21 @@ devices explicitly. Sysfs attributes ---------------- +============= ================================================== in0_input Voltage at Vcc pin in millivolt (range 2.5V to 5V) -temp1_input Internal chip temperature in millidegrees Celcius +temp1_input Internal chip temperature in millidegrees Celsius +============= ================================================== A subset of the following attributes are visible, depending on the measurement mode of the chip. +============= ========================================================== in[1-4]_input Voltage at V[1-4] pin in millivolt -temp2_input External temperature sensor TR1 in millidegrees Celcius -temp3_input External temperature sensor TR2 in millidegrees Celcius +temp2_input External temperature sensor TR1 in millidegrees Celsius +temp3_input External temperature sensor TR2 in millidegrees Celsius curr1_input Current in mA across V1-V2 assuming a 1mOhm sense resistor curr2_input Current in mA across V3-V4 assuming a 1mOhm sense resistor +============= ========================================================== The "curr*_input" measurements actually report the voltage drop across the input pins in microvolts. This is equivalent to the current through a 1mOhm diff --git a/Documentation/hwmon/ltc4151 b/Documentation/hwmon/ltc4151 index 43c667e6677a..c39229b19624 100644 --- a/Documentation/hwmon/ltc4151 +++ b/Documentation/hwmon/ltc4151 @@ -2,11 +2,16 @@ Kernel driver ltc4151 ===================== Supported chips: + * Linear Technology LTC4151 + Prefix: 'ltc4151' + Addresses scanned: - + Datasheet: - http://www.linear.com/docs/Datasheet/4151fc.pdf + + http://www.linear.com/docs/Datasheet/4151fc.pdf Author: Per Dalen @@ -25,9 +30,10 @@ which can be safely used to identify the chip. You will have to instantiate the devices explicitly. Example: the following will load the driver for an LTC4151 at address 0x6f -on I2C bus #0: -# modprobe ltc4151 -# echo ltc4151 0x6f > /sys/bus/i2c/devices/i2c-0/new_device +on I2C bus #0:: + + # modprobe ltc4151 + # echo ltc4151 0x6f > /sys/bus/i2c/devices/i2c-0/new_device Sysfs entries @@ -40,8 +46,10 @@ Current reading provided by this driver is reported as obtained from the Current Sense register. The reported value assumes that a 1 mOhm sense resistor is installed. +======================= ================== in1_input VDIN voltage (mV) in2_input ADIN voltage (mV) curr1_input SENSE current (mA) +======================= ================== diff --git a/Documentation/hwmon/ltc4215 b/Documentation/hwmon/ltc4215 index c196a1846259..8d5044d99bab 100644 --- a/Documentation/hwmon/ltc4215 +++ b/Documentation/hwmon/ltc4215 @@ -2,11 +2,16 @@ Kernel driver ltc4215 ===================== Supported chips: + * Linear Technology LTC4215 + Prefix: 'ltc4215' + Addresses scanned: 0x44 + Datasheet: - http://www.linear.com/pc/downloadDocument.do?navId=H0,C1,C1003,C1006,C1163,P17572,D12697 + + http://www.linear.com/pc/downloadDocument.do?navId=H0,C1,C1003,C1006,C1163,P17572,D12697 Author: Ira W. Snyder @@ -26,9 +31,10 @@ of the possible addresses are unfriendly to probing. You will have to instantiate the devices explicitly. Example: the following will load the driver for an LTC4215 at address 0x44 -on I2C bus #0: -$ modprobe ltc4215 -$ echo ltc4215 0x44 > /sys/bus/i2c/devices/i2c-0/new_device +on I2C bus #0:: + + $ modprobe ltc4215 + $ echo ltc4215 0x44 > /sys/bus/i2c/devices/i2c-0/new_device Sysfs entries @@ -38,6 +44,7 @@ The LTC4215 has built-in limits for overvoltage, undervoltage, and undercurrent warnings. This makes it very likely that the reference circuit will be used. +======================= ========================= in1_input input voltage in2_input output voltage @@ -49,3 +56,4 @@ curr1_max_alarm overcurrent alarm power1_input power usage power1_alarm power bad alarm +======================= ========================= diff --git a/Documentation/hwmon/ltc4245 b/Documentation/hwmon/ltc4245 index 4ca7a9da09f9..3dafd08a4e87 100644 --- a/Documentation/hwmon/ltc4245 +++ b/Documentation/hwmon/ltc4245 @@ -2,11 +2,16 @@ Kernel driver ltc4245 ===================== Supported chips: + * Linear Technology LTC4245 + Prefix: 'ltc4245' + Addresses scanned: 0x20-0x3f + Datasheet: - http://www.linear.com/pc/downloadDocument.do?navId=H0,C1,C1003,C1006,C1140,P19392,D13517 + + http://www.linear.com/pc/downloadDocument.do?navId=H0,C1,C1003,C1006,C1140,P19392,D13517 Author: Ira W. Snyder @@ -27,9 +32,10 @@ of the possible addresses are unfriendly to probing. You will have to instantiate the devices explicitly. Example: the following will load the driver for an LTC4245 at address 0x23 -on I2C bus #1: -$ modprobe ltc4245 -$ echo ltc4245 0x23 > /sys/bus/i2c/devices/i2c-1/new_device +on I2C bus #1:: + + $ modprobe ltc4245 + $ echo ltc4245 0x23 > /sys/bus/i2c/devices/i2c-1/new_device Sysfs entries @@ -42,6 +48,7 @@ This driver uses the values in the datasheet to change the register values into the values specified in the sysfs-interface document. The current readings rely on the sense resistors listed in Table 2: "Sense Resistor Values". +======================= ======================================================= in1_input 12v input voltage (mV) in2_input 5v input voltage (mV) in3_input 3v input voltage (mV) @@ -80,6 +87,7 @@ power1_input 12v power usage (mW) power2_input 5v power usage (mW) power3_input 3v power usage (mW) power4_input Vee (-12v) power usage (mW) +======================= ======================================================= Note 1 @@ -96,6 +104,7 @@ slowly, -EAGAIN will be returned when you read the sysfs attribute containing the sensor reading. The LTC4245 chip can be configured to sample all GPIO pins with two methods: + 1) platform data -- see include/linux/platform_data/ltc4245.h 2) OF device tree -- add the "ltc4245,use-extra-gpios" property to each chip diff --git a/Documentation/hwmon/ltc4260 b/Documentation/hwmon/ltc4260 index c4ff4ad998b2..4c335b6a51d1 100644 --- a/Documentation/hwmon/ltc4260 +++ b/Documentation/hwmon/ltc4260 @@ -2,11 +2,16 @@ Kernel driver ltc4260 ===================== Supported chips: + * Linear Technology LTC4260 + Prefix: 'ltc4260' + Addresses scanned: - + Datasheet: - http://cds.linear.com/docs/en/datasheet/4260fc.pdf + + http://cds.linear.com/docs/en/datasheet/4260fc.pdf Author: Guenter Roeck @@ -26,9 +31,10 @@ which can be safely used to identify the chip. You will have to instantiate the devices explicitly. Example: the following will load the driver for an LTC4260 at address 0x10 -on I2C bus #1: -$ modprobe ltc4260 -$ echo ltc4260 0x10 > /sys/bus/i2c/devices/i2c-1/new_device +on I2C bus #1:: + + $ modprobe ltc4260 + $ echo ltc4260 0x10 > /sys/bus/i2c/devices/i2c-1/new_device Sysfs entries @@ -45,6 +51,7 @@ Current Sense register. The reported value assumes that a 1 mOhm sense resistor is installed. If a different sense resistor is installed, calculate the real current by dividing the reported value by the sense resistor value in mOhm. +======================= ======================= in1_input SOURCE voltage (mV) in1_min_alarm Undervoltage alarm in1_max_alarm Overvoltage alarm @@ -54,3 +61,4 @@ in2_alarm Power bad alarm curr1_input SENSE current (mA) curr1_alarm SENSE overcurrent alarm +======================= ======================= diff --git a/Documentation/hwmon/max1619 b/Documentation/hwmon/max1619 index 518bae3a80c4..4b3762c4eceb 100644 --- a/Documentation/hwmon/max1619 +++ b/Documentation/hwmon/max1619 @@ -2,15 +2,20 @@ Kernel driver max1619 ===================== Supported chips: + * Maxim MAX1619 + Prefix: 'max1619' + Addresses scanned: I2C 0x18-0x1a, 0x29-0x2b, 0x4c-0x4e + Datasheet: Publicly available at the Maxim website - http://pdfserv.maxim-ic.com/en/ds/MAX1619.pdf + + http://pdfserv.maxim-ic.com/en/ds/MAX1619.pdf Authors: - Oleksij Rempel , - Jean Delvare + - Oleksij Rempel , + - Jean Delvare Description ----------- diff --git a/Documentation/hwmon/max1668 b/Documentation/hwmon/max1668 index 8f9d570dbfec..417f17d750e6 100644 --- a/Documentation/hwmon/max1668 +++ b/Documentation/hwmon/max1668 @@ -2,12 +2,17 @@ Kernel driver max1668 ===================== Supported chips: + * Maxim MAX1668, MAX1805 and MAX1989 + Prefix: 'max1668' + Addresses scanned: I2C 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e + Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX1668-MAX1989.pdf Author: + David George Description @@ -23,8 +28,9 @@ two ICs. The driver is able to distinguish between the devices and creates sysfs entries as follows: -MAX1805, MAX1668 and MAX1989: +- MAX1805, MAX1668 and MAX1989: +=============== == ============================================================ temp1_input ro local (ambient) temperature temp1_max rw local temperature maximum threshold for alarm temp1_max_alarm ro local temperature maximum threshold alarm @@ -40,8 +46,11 @@ temp3_max rw remote temperature 2 maximum threshold for alarm temp3_max_alarm ro remote temperature 2 maximum threshold alarm temp3_min rw remote temperature 2 minimum threshold for alarm temp3_min_alarm ro remote temperature 2 minimum threshold alarm +=============== == ============================================================ -MAX1668 and MAX1989 only: +- MAX1668 and MAX1989 only: + +=============== == ============================================================ temp4_input ro remote temperature 3 temp4_max rw remote temperature 3 maximum threshold for alarm temp4_max_alarm ro remote temperature 3 maximum threshold alarm @@ -52,6 +61,7 @@ temp5_max rw remote temperature 4 maximum threshold for alarm temp5_max_alarm ro remote temperature 4 maximum threshold alarm temp5_min rw remote temperature 4 minimum threshold for alarm temp5_min_alarm ro remote temperature 4 minimum threshold alarm +=============== == ============================================================ Module Parameters ----------------- diff --git a/Documentation/hwmon/max197 b/Documentation/hwmon/max197 index 8d89b9009df8..02fe19bc3428 100644 --- a/Documentation/hwmon/max197 +++ b/Documentation/hwmon/max197 @@ -1,16 +1,22 @@ -Maxim MAX197 driver -=================== +Kernel driver max197 +==================== Author: + * Vivien Didelot Supported chips: + * Maxim MAX197 + Prefix: 'max197' + Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX197.pdf * Maxim MAX199 + Prefix: 'max199' + Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX199.pdf Description @@ -26,7 +32,7 @@ Platform data ------------- The MAX197 platform data (defined in linux/platform_data/max197.h) should be -filled with a pointer to a conversion function, defined like: +filled with a pointer to a conversion function, defined like:: int convert(u8 ctrl); @@ -36,25 +42,29 @@ or a negative error code otherwise. Control byte format: +======= ========== ============================================ Bit Name Description 7,6 PD1,PD0 Clock and Power-Down modes 5 ACQMOD Internal or External Controlled Acquisition 4 RNG Full-scale voltage magnitude at the input 3 BIP Unipolar or Bipolar conversion mode 2,1,0 A2,A1,A0 Channel +======= ========== ============================================ Sysfs interface --------------- -* in[0-7]_input: The conversion value for the corresponding channel. - RO + ============== ============================================================== + in[0-7]_input The conversion value for the corresponding channel. + RO -* in[0-7]_min: The lower limit (in mV) for the corresponding channel. - For the MAX197, it will be adjusted to -10000, -5000, or 0. - For the MAX199, it will be adjusted to -4000, -2000, or 0. - RW + in[0-7]_min The lower limit (in mV) for the corresponding channel. + For the MAX197, it will be adjusted to -10000, -5000, or 0. + For the MAX199, it will be adjusted to -4000, -2000, or 0. + RW -* in[0-7]_max: The higher limit (in mV) for the corresponding channel. - For the MAX197, it will be adjusted to 0, 5000, or 10000. - For the MAX199, it will be adjusted to 0, 2000, or 4000. - RW + in[0-7]_max The higher limit (in mV) for the corresponding channel. + For the MAX197, it will be adjusted to 0, 5000, or 10000. + For the MAX199, it will be adjusted to 0, 2000, or 4000. + RW + ============== ============================================================== diff --git a/Documentation/hwmon/max31722 b/Documentation/hwmon/max31722 index 090da84538c8..0ab15c00b226 100644 --- a/Documentation/hwmon/max31722 +++ b/Documentation/hwmon/max31722 @@ -2,15 +2,25 @@ Kernel driver max31722 ====================== Supported chips: + * Maxim Integrated MAX31722 + Prefix: 'max31722' + ACPI ID: MAX31722 + Addresses scanned: - + Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31722-MAX31723.pdf + * Maxim Integrated MAX31723 + Prefix: 'max31723' + ACPI ID: MAX31723 + Addresses scanned: - + Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31722-MAX31723.pdf Author: Tiberiu Breana @@ -31,4 +41,6 @@ Sysfs entries The following attribute is supported: +======================= ======================================================= temp1_input Measured temperature. Read-only. +======================= ======================================================= diff --git a/Documentation/hwmon/max31790 b/Documentation/hwmon/max31790 index 855e62430da9..84c62a12ef3a 100644 --- a/Documentation/hwmon/max31790 +++ b/Documentation/hwmon/max31790 @@ -2,9 +2,13 @@ Kernel driver max31790 ====================== Supported chips: + * Maxim MAX31790 + Prefix: 'max31790' + Addresses scanned: - + Datasheet: http://pdfserv.maximintegrated.com/en/ds/MAX31790.pdf Author: Il Han @@ -30,8 +34,10 @@ also be configured to serve as tachometer inputs. Sysfs entries ------------- +================== === ======================================================= fan[1-12]_input RO fan tachometer speed in RPM fan[1-12]_fault RO fan experienced fault fan[1-6]_target RW desired fan speed in RPM pwm[1-6]_enable RW regulator mode, 0=disabled, 1=manual mode, 2=rpm mode pwm[1-6] RW fan target duty cycle (0-255) +================== === ======================================================= diff --git a/Documentation/hwmon/max6639 b/Documentation/hwmon/max6639 index dc49f8be7167..3da54225f83c 100644 --- a/Documentation/hwmon/max6639 +++ b/Documentation/hwmon/max6639 @@ -2,14 +2,18 @@ Kernel driver max6639 ===================== Supported chips: + * Maxim MAX6639 + Prefix: 'max6639' + Addresses scanned: I2C 0x2c, 0x2e, 0x2f + Datasheet: http://pdfserv.maxim-ic.com/en/ds/MAX6639.pdf Authors: - He Changqing - Roland Stigge + - He Changqing + - Roland Stigge Description ----------- @@ -21,19 +25,20 @@ diode-connected transistors. The following device attributes are implemented via sysfs: +====================== ==== =================================================== Attribute R/W Contents ----------------------------------------------------------------------------- +====================== ==== =================================================== temp1_input R Temperature channel 1 input (0..150 C) temp2_input R Temperature channel 2 input (0..150 C) temp1_fault R Temperature channel 1 diode fault temp2_fault R Temperature channel 2 diode fault temp1_max RW Set THERM temperature for input 1 - (in C, see datasheet) + (in C, see datasheet) temp2_max RW Set THERM temperature for input 2 temp1_crit RW Set ALERT temperature for input 1 temp2_crit RW Set ALERT temperature for input 2 temp1_emergency RW Set OT temperature for input 1 - (in C, see datasheet) + (in C, see datasheet) temp2_emergency RW Set OT temperature for input 2 pwm1 RW Fan 1 target duty cycle (0..255) pwm2 RW Fan 2 target duty cycle (0..255) @@ -47,3 +52,4 @@ temp1_crit_alarm R Alarm on ALERT temperature on channel 1 temp2_crit_alarm R Alarm on ALERT temperature on channel 2 temp1_emergency_alarm R Alarm on OT temperature on channel 1 temp2_emergency_alarm R Alarm on OT temperature on channel 2 +====================== ==== =================================================== diff --git a/Documentation/hwmon/max6642 b/Documentation/hwmon/max6642 index afbd3e4942e2..7e5b7d4f9492 100644 --- a/Documentation/hwmon/max6642 +++ b/Documentation/hwmon/max6642 @@ -2,14 +2,20 @@ Kernel driver max6642 ===================== Supported chips: + * Maxim MAX6642 + Prefix: 'max6642' + Addresses scanned: I2C 0x48-0x4f + Datasheet: Publicly available at the Maxim website - http://datasheets.maxim-ic.com/en/ds/MAX6642.pdf + + http://datasheets.maxim-ic.com/en/ds/MAX6642.pdf Authors: - Per Dalen + + Per Dalen Description ----------- diff --git a/Documentation/hwmon/max6650 b/Documentation/hwmon/max6650 index dff1d296a48b..74dc3f0caaa2 100644 --- a/Documentation/hwmon/max6650 +++ b/Documentation/hwmon/max6650 @@ -2,19 +2,27 @@ Kernel driver max6650 ===================== Supported chips: + * Maxim MAX6650 + Prefix: 'max6650' + Addresses scanned: none + Datasheet: http://pdfserv.maxim-ic.com/en/ds/MAX6650-MAX6651.pdf + * Maxim MAX6651 + Prefix: 'max6651' + Addresses scanned: none + Datasheet: http://pdfserv.maxim-ic.com/en/ds/MAX6650-MAX6651.pdf Authors: - Hans J. Koch - John Morris - Claus Gindhart + - Hans J. Koch + - John Morris + - Claus Gindhart Description ----------- @@ -28,6 +36,7 @@ The driver is not able to distinguish between the 2 devices. The driver provides the following sensor accesses in sysfs: +=============== ======= ======================================================= fan1_input ro fan tachometer speed in RPM fan2_input ro " fan3_input ro " @@ -40,6 +49,7 @@ pwm1 rw relative speed (0-255), 255=max. speed. fan1_div rw sets the speed range the inputs can handle. Legal values are 1, 2, 4, and 8. Use lower values for faster fans. +=============== ======= ======================================================= Usage notes ----------- diff --git a/Documentation/hwmon/mc13783-adc b/Documentation/hwmon/mc13783-adc index 05ccc9f159f1..cae70350ba2f 100644 --- a/Documentation/hwmon/mc13783-adc +++ b/Documentation/hwmon/mc13783-adc @@ -2,16 +2,25 @@ Kernel driver mc13783-adc ========================= Supported chips: + * Freescale MC13783 + Prefix: 'mc13783' + Datasheet: https://www.nxp.com/docs/en/data-sheet/MC13783.pdf + * Freescale MC13892 + Prefix: 'mc13892' + Datasheet: https://www.nxp.com/docs/en/data-sheet/MC13892.pdf + + Authors: - Sascha Hauer - Luotao Fu + + - Sascha Hauer + - Luotao Fu Description ----------- @@ -30,9 +39,11 @@ the General Purpose inputs and touchscreen. See the following tables for the meaning of the different channels and their chip internal scaling: -MC13783: +- MC13783: + +======= =============================================== =============== ======= Channel Signal Input Range Scaling -------------------------------------------------------------------------------- +======= =============================================== =============== ======= 0 Battery Voltage (BATT) 2.50 - 4.65V -2.40V 1 Battery Current (BATT - BATTISNS) -50 - 50 mV x20 2 Application Supply (BP) 2.50 - 4.65V -2.40V @@ -52,10 +63,13 @@ Channel Signal Input Range Scaling 13 General Purpose TSX2 / Touchscreen X-plate 2 0 - 2.30V No 14 General Purpose TSY1 / Touchscreen Y-plate 1 0 - 2.30V No 15 General Purpose TSY2 / Touchscreen Y-plate 2 0 - 2.30V No +======= =============================================== =============== ======= -MC13892: +- MC13892: + +======= =============================================== =============== ======= Channel Signal Input Range Scaling -------------------------------------------------------------------------------- +======= =============================================== =============== ======= 0 Battery Voltage (BATT) 0 - 4.8V /2 1 Battery Current (BATT - BATTISNSCC) -60 - 60 mV x20 2 Application Supply (BPSNS) 0 - 4.8V /2 @@ -72,3 +86,4 @@ Channel Signal Input Range Scaling 13 General Purpose TSX2 / Touchscreen X-plate 2 0 - 2.4V No 14 General Purpose TSY1 / Touchscreen Y-plate 1 0 - 2.4V No 15 General Purpose TSY2 / Touchscreen Y-plate 2 0 - 2.4V No +======= =============================================== =============== ======= diff --git a/Documentation/hwmon/mcp3021 b/Documentation/hwmon/mcp3021 index 74a6b72adf5f..83f4bda2f269 100644 --- a/Documentation/hwmon/mcp3021 +++ b/Documentation/hwmon/mcp3021 @@ -1,17 +1,26 @@ Kernel driver MCP3021 -====================== +===================== Supported chips: + * Microchip Technology MCP3021 + Prefix: 'mcp3021' + Datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/21805a.pdf + * Microchip Technology MCP3221 + Prefix: 'mcp3221' + Datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/21732c.pdf + + Authors: - Mingkai Hu - Sven Schuchmann + + - Mingkai Hu + - Sven Schuchmann Description ----------- diff --git a/Documentation/hwmon/mlxreg-fan b/Documentation/hwmon/mlxreg-fan index fc531c6978d4..c92b8e885f7e 100644 --- a/Documentation/hwmon/mlxreg-fan +++ b/Documentation/hwmon/mlxreg-fan @@ -2,32 +2,38 @@ Kernel driver mlxreg-fan ======================== Provides FAN control for the next Mellanox systems: -QMB700, equipped with 40x200GbE InfiniBand ports; -MSN3700, equipped with 32x200GbE or 16x400GbE Ethernet ports; -MSN3410, equipped with 6x400GbE plus 48x50GbE Ethernet ports; -MSN3800, equipped with 64x1000GbE Ethernet ports; + +- QMB700, equipped with 40x200GbE InfiniBand ports; +- MSN3700, equipped with 32x200GbE or 16x400GbE Ethernet ports; +- MSN3410, equipped with 6x400GbE plus 48x50GbE Ethernet ports; +- MSN3800, equipped with 64x1000GbE Ethernet ports; + +Author: Vadim Pasternak + These are the Top of the Rack systems, equipped with Mellanox switch board with Mellanox Quantum or Spectrume-2 devices. FAN controller is implemented by the programmable device logic. The default registers offsets set within the programmable device is as following: -- pwm1 0xe3 -- fan1 (tacho1) 0xe4 -- fan2 (tacho2) 0xe5 -- fan3 (tacho3) 0xe6 -- fan4 (tacho4) 0xe7 -- fan5 (tacho5) 0xe8 -- fan6 (tacho6) 0xe9 -- fan7 (tacho7) 0xea -- fan8 (tacho8) 0xeb -- fan9 (tacho9) 0xec -- fan10 (tacho10) 0xed -- fan11 (tacho11) 0xee -- fan12 (tacho12) 0xef -This setup can be re-programmed with other registers. -Author: Vadim Pasternak +======================= ==== +pwm1 0xe3 +fan1 (tacho1) 0xe4 +fan2 (tacho2) 0xe5 +fan3 (tacho3) 0xe6 +fan4 (tacho4) 0xe7 +fan5 (tacho5) 0xe8 +fan6 (tacho6) 0xe9 +fan7 (tacho7) 0xea +fan8 (tacho8) 0xeb +fan9 (tacho9) 0xec +fan10 (tacho10) 0xed +fan11 (tacho11) 0xee +fan12 (tacho12) 0xef +======================= ==== + +This setup can be re-programmed with other registers. Description ----------- @@ -48,13 +54,17 @@ thermal's sysfs interfaces. /sys files in hwmon subsystem ----------------------------- -fan[1-12]_fault - RO files for tachometers TACH1-TACH12 fault indication -fan[1-12]_input - RO files for tachometers TACH1-TACH12 input (in RPM) -pwm1 - RW file for fan[1-12] target duty cycle (0..255) +================= == =================================================== +fan[1-12]_fault RO files for tachometers TACH1-TACH12 fault indication +fan[1-12]_input RO files for tachometers TACH1-TACH12 input (in RPM) +pwm1 RW file for fan[1-12] target duty cycle (0..255) +================= == =================================================== /sys files in thermal subsystem ------------------------------- -cur_state - RW file for current cooling state of the cooling device - (0..max_state) -max_state - RO file for maximum cooling state of the cooling device +================= == ==================================================== +cur_state RW file for current cooling state of the cooling device + (0..max_state) +max_state RO file for maximum cooling state of the cooling device +================= == ==================================================== diff --git a/Documentation/hwmon/nct6683 b/Documentation/hwmon/nct6683 index c1301d4300cd..efbf7e9703ec 100644 --- a/Documentation/hwmon/nct6683 +++ b/Documentation/hwmon/nct6683 @@ -2,13 +2,18 @@ Kernel driver nct6683 ===================== Supported chips: + * Nuvoton NCT6683D + Prefix: 'nct6683' + Addresses scanned: ISA address retrieved from Super I/O registers + Datasheet: Available from Nuvoton upon request Authors: - Guenter Roeck + + Guenter Roeck Description ----------- @@ -50,8 +55,10 @@ Tested Boards and Firmware Versions The driver has been reported to work with the following boards and firmware versions. +=============== =============================================== Board Firmware version ---------------------------------------------------------------- +=============== =============================================== Intel DH87RL NCT6683D EC firmware version 1.0 build 04/03/13 Intel DH87MC NCT6683D EC firmware version 1.0 build 04/03/13 Intel DB85FL NCT6683D EC firmware version 1.0 build 04/03/13 +=============== =============================================== diff --git a/Documentation/hwmon/nct7802 b/Documentation/hwmon/nct7802 index 5438deb6be02..8b7365a7cb32 100644 --- a/Documentation/hwmon/nct7802 +++ b/Documentation/hwmon/nct7802 @@ -2,13 +2,18 @@ Kernel driver nct7802 ===================== Supported chips: + * Nuvoton NCT7802Y + Prefix: 'nct7802' + Addresses scanned: I2C 0x28..0x2f + Datasheet: Available from Nuvoton web site Authors: - Guenter Roeck + + Guenter Roeck Description ----------- @@ -25,7 +30,9 @@ Tested Boards and BIOS Versions The driver has been reported to work with the following boards and BIOS versions. +======================= =============================================== Board BIOS version ---------------------------------------------------------------- +======================= =============================================== Kontron COMe-bSC2 CHR2E934.001.GGO Kontron COMe-bIP2 CCR2E212 +======================= =============================================== diff --git a/Documentation/hwmon/nct7904 b/Documentation/hwmon/nct7904 index 57fffe33ebfc..5b2f111582ff 100644 --- a/Documentation/hwmon/nct7904 +++ b/Documentation/hwmon/nct7904 @@ -1,11 +1,16 @@ Kernel driver nct7904 -==================== +===================== Supported chip: + * Nuvoton NCT7904D + Prefix: nct7904 + Addresses: I2C 0x2d, 0x2e + Datasheet: Publicly available at Nuvoton website + http://www.nuvoton.com/ Author: Vadim V. Vlasov @@ -25,6 +30,7 @@ Sysfs entries Currently, the driver supports only the following features: +======================= ======================================================= in[1-20]_input Input voltage measurements (mV) fan[1-12]_input Fan tachometer measurements (rpm) @@ -40,6 +46,7 @@ pwm[1-4]_enable R/W, 1/2 for manual or SmartFan mode previously configured by BIOS (or configuration EEPROM) pwm[1-4] R/O in SmartFan mode, R/W in manual control mode +======================= ======================================================= The driver checks sensor control registers and does not export the sensors that are not enabled. Anyway, a sensor that is enabled may actually be not diff --git a/Documentation/hwmon/npcm750-pwm-fan b/Documentation/hwmon/npcm750-pwm-fan index 6156ef7398e6..c67af08b6773 100644 --- a/Documentation/hwmon/npcm750-pwm-fan +++ b/Documentation/hwmon/npcm750-pwm-fan @@ -2,9 +2,11 @@ Kernel driver npcm750-pwm-fan ============================= Supported chips: + NUVOTON NPCM750/730/715/705 Authors: + Description: @@ -15,8 +17,10 @@ controller supports up to 16 tachometer inputs. The driver provides the following sensor accesses in sysfs: +=============== ======= ===================================================== fanX_input ro provide current fan rotation value in RPM as reported by the fan to the device. pwmX rw get or set PWM fan control value. This is an integer value between 0(off) and 255(full speed). +=============== ======= ===================================================== diff --git a/Documentation/hwmon/nsa320 b/Documentation/hwmon/nsa320 index fdbd6947799b..4fe75fd2f937 100644 --- a/Documentation/hwmon/nsa320 +++ b/Documentation/hwmon/nsa320 @@ -2,14 +2,23 @@ Kernel driver nsa320_hwmon ========================== Supported chips: + * Holtek HT46R065 microcontroller with onboard firmware that configures + it to act as a hardware monitor. + Prefix: 'nsa320' + Addresses scanned: none + Datasheet: Not available, driver was reverse engineered based upon the + Zyxel kernel source + + Author: + Adam Baker Description @@ -31,8 +40,10 @@ tenths of a degree. sysfs-Interface --------------- -temp1_input - temperature input -fan1_input - fan speed +============= ================= +temp1_input temperature input +fan1_input fan speed +============= ================= Notes ----- diff --git a/Documentation/hwmon/ntc_thermistor b/Documentation/hwmon/ntc_thermistor index 8b9ff23edc32..d0e7f91726b9 100644 --- a/Documentation/hwmon/ntc_thermistor +++ b/Documentation/hwmon/ntc_thermistor @@ -1,22 +1,29 @@ Kernel driver ntc_thermistor -================= +============================ Supported thermistors from Murata: + * Murata NTC Thermistors NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333, NCP03WF104, NCP15XH103 + Prefixes: 'ncp15wb473', 'ncp18wb473', 'ncp21wb473', 'ncp03wb473', 'ncp15wl333', 'ncp03wf104', 'ncp15xh103' + Datasheet: Publicly available at Murata Supported thermistors from EPCOS: + * EPCOS NTC Thermistors B57330V2103 + Prefixes: b57330v2103 + Datasheet: Publicly available at EPCOS Other NTC thermistors can be supported simply by adding compensation tables; e.g., NCP15WL333 support is added by the table ncpXXwl333. Authors: + MyungJoo Ham Description @@ -29,57 +36,60 @@ compensation table to get the temperature input. The NTC driver provides lookup tables with a linear approximation function and four circuit models with an option not to use any of the four models. +Using the following convention:: + + $ resistor + [TH] the thermistor + The four circuit models provided are: - $: resister, [TH]: the thermistor +1. connect = NTC_CONNECTED_POSITIVE, pullup_ohm > 0:: - 1. connect = NTC_CONNECTED_POSITIVE, pullup_ohm > 0 + [pullup_uV] + | | + [TH] $ (pullup_ohm) + | | + +----+-----------------------[read_uV] + | + $ (pulldown_ohm) + | + -+- (ground) - [pullup_uV] - | | - [TH] $ (pullup_ohm) - | | - +----+-----------------------[read_uV] - | - $ (pulldown_ohm) - | - --- (ground) +2. connect = NTC_CONNECTED_POSITIVE, pullup_ohm = 0 (not-connected):: - 2. connect = NTC_CONNECTED_POSITIVE, pullup_ohm = 0 (not-connected) + [pullup_uV] + | + [TH] + | + +----------------------------[read_uV] + | + $ (pulldown_ohm) + | + -+- (ground) - [pullup_uV] - | - [TH] - | - +----------------------------[read_uV] - | - $ (pulldown_ohm) - | - --- (ground) +3. connect = NTC_CONNECTED_GROUND, pulldown_ohm > 0:: - 3. connect = NTC_CONNECTED_GROUND, pulldown_ohm > 0 + [pullup_uV] + | + $ (pullup_ohm) + | + +----+-----------------------[read_uV] + | | + [TH] $ (pulldown_ohm) + | | + -+----+- (ground) - [pullup_uV] - | - $ (pullup_ohm) - | - +----+-----------------------[read_uV] - | | - [TH] $ (pulldown_ohm) - | | - -------- (ground) +4. connect = NTC_CONNECTED_GROUND, pulldown_ohm = 0 (not-connected):: - 4. connect = NTC_CONNECTED_GROUND, pulldown_ohm = 0 (not-connected) - - [pullup_uV] - | - $ (pullup_ohm) - | - +----------------------------[read_uV] - | - [TH] - | - --- (ground) + [pullup_uV] + | + $ (pullup_ohm) + | + +----------------------------[read_uV] + | + [TH] + | + -+- (ground) When one of the four circuit models is used, read_uV, pullup_uV, pullup_ohm, pulldown_ohm, and connect should be provided. When none of the four models @@ -88,13 +98,14 @@ provide read_ohm and _not_ provide the others. Sysfs Interface --------------- -name the mandatory global attribute, the thermistor name. -temp1_type always 4 (thermistor) - RO +=============== == ============================================================= +name the mandatory global attribute, the thermistor name. +=============== == ============================================================= +temp1_type RO always 4 (thermistor) -temp1_input measure the temperature and provide the measured value. - (reading this file initiates the reading procedure.) - RO +temp1_input RO measure the temperature and provide the measured value. + (reading this file initiates the reading procedure.) +=============== == ============================================================= Note that each NTC thermistor has only _one_ thermistor; thus, only temp1 exists. diff --git a/Documentation/hwmon/occ b/Documentation/hwmon/occ index e787596e03fe..bf41c162d70e 100644 --- a/Documentation/hwmon/occ +++ b/Documentation/hwmon/occ @@ -2,6 +2,7 @@ Kernel driver occ-hwmon ======================= Supported chips: + * POWER8 * POWER9 @@ -37,53 +38,87 @@ Some entries are only present with certain OCC sensor versions or only on certain OCCs in the system. The version number is not exported to the user but can be inferred. -temp[1-n]_label OCC sensor ID. +temp[1-n]_label + OCC sensor ID. + [with temperature sensor version 1] - temp[1-n]_input Measured temperature of the component in millidegrees + + temp[1-n]_input + Measured temperature of the component in millidegrees Celsius. + [with temperature sensor version >= 2] - temp[1-n]_type The FRU (Field Replaceable Unit) type + + temp[1-n]_type + The FRU (Field Replaceable Unit) type (represented by an integer) for the component that this sensor measures. - temp[1-n]_fault Temperature sensor fault boolean; 1 to indicate + temp[1-n]_fault + Temperature sensor fault boolean; 1 to indicate that a fault is present or 0 to indicate that no fault is present. + [with type == 3 (FRU type is VRM)] - temp[1-n]_alarm VRM temperature alarm boolean; 1 to indicate + + temp[1-n]_alarm + VRM temperature alarm boolean; 1 to indicate alarm, 0 to indicate no alarm + [else] - temp[1-n]_input Measured temperature of the component in + + temp[1-n]_input + Measured temperature of the component in millidegrees Celsius. -freq[1-n]_label OCC sensor ID. -freq[1-n]_input Measured frequency of the component in MHz. - -power[1-n]_input Latest measured power reading of the component in +freq[1-n]_label + OCC sensor ID. +freq[1-n]_input + Measured frequency of the component in MHz. +power[1-n]_input + Latest measured power reading of the component in microwatts. -power[1-n]_average Average power of the component in microwatts. -power[1-n]_average_interval The amount of time over which the power average +power[1-n]_average + Average power of the component in microwatts. +power[1-n]_average_interval + The amount of time over which the power average was taken in microseconds. + [with power sensor version < 2] - power[1-n]_label OCC sensor ID. + + power[1-n]_label + OCC sensor ID. + [with power sensor version >= 2] - power[1-n]_label OCC sensor ID + function ID + channel in the form + + power[1-n]_label + OCC sensor ID + function ID + channel in the form of a string, delimited by underscores, i.e. "0_15_1". Both the function ID and channel are integers that further identify the power sensor. + [with power sensor version 0xa0] - power[1-n]_label OCC sensor ID + sensor type in the form of a string, + + power[1-n]_label + OCC sensor ID + sensor type in the form of a string, delimited by an underscore, i.e. "0_system". Sensor type will be one of "system", "proc", "vdd" or "vdn". For this sensor version, OCC sensor ID will be the same for all power sensors. + [present only on "master" OCC; represents the whole system power; only one of - this type of power sensor will be present] - power[1-n]_label "system" - power[1-n]_input Latest system output power in microwatts. - power[1-n]_cap Current system power cap in microwatts. - power[1-n]_cap_not_redundant System power cap in microwatts when - there is not redundant power. - power[1-n]_cap_max Maximum power cap that the OCC can enforce in +this type of power sensor will be present] + + power[1-n]_label + "system" + power[1-n]_input + Latest system output power in microwatts. + power[1-n]_cap + Current system power cap in microwatts. + power[1-n]_cap_not_redundant + System power cap in microwatts when + there is not redundant power. + power[1-n]_cap_max + Maximum power cap that the OCC can enforce in microwatts. power[1-n]_cap_min Minimum power cap that the OCC can enforce in microwatts. @@ -94,8 +129,11 @@ power[1-n]_average_interval The amount of time over which the power average ignored, i.e. requesting a power cap of 500900000 microwatts will result in a power cap request of 500 watts. + [with caps sensor version > 1] - power[1-n]_cap_user_source Indicates how the user power cap was + + power[1-n]_cap_user_source + Indicates how the user power cap was set. This is an integer that maps to system or firmware components that can set the user power cap. @@ -104,9 +142,12 @@ The following "extn" sensors are exported as a way for the OCC to provide data that doesn't fit anywhere else. The meaning of these sensors is entirely dependent on their data, and cannot be statically defined. -extn[1-n]_label ASCII ID or OCC sensor ID. -extn[1-n]_flags This is one byte hexadecimal value. Bit 7 indicates the +extn[1-n]_label + ASCII ID or OCC sensor ID. +extn[1-n]_flags + This is one byte hexadecimal value. Bit 7 indicates the type of the label attribute; 1 for sensor ID, 0 for ASCII ID. Other bits are reserved. -extn[1-n]_input 6 bytes of hexadecimal data, with a meaning defined by +extn[1-n]_input + 6 bytes of hexadecimal data, with a meaning defined by the sensor ID. diff --git a/Documentation/hwmon/pc87427 b/Documentation/hwmon/pc87427 index c313eb66e08a..22d8f62d851f 100644 --- a/Documentation/hwmon/pc87427 +++ b/Documentation/hwmon/pc87427 @@ -2,9 +2,13 @@ Kernel driver pc87427 ===================== Supported chips: + * National Semiconductor PC87427 + Prefix: 'pc87427' + Addresses scanned: none, address read from Super I/O config space + Datasheet: No longer available Author: Jean Delvare diff --git a/Documentation/hwmon/pcf8591 b/Documentation/hwmon/pcf8591 index 447c0702c0ec..e98bd542a441 100644 --- a/Documentation/hwmon/pcf8591 +++ b/Documentation/hwmon/pcf8591 @@ -2,16 +2,21 @@ Kernel driver pcf8591 ===================== Supported chips: + * Philips/NXP PCF8591 + Prefix: 'pcf8591' + Addresses scanned: none + Datasheet: Publicly available at the NXP website - http://www.nxp.com/pip/PCF8591_6.html + + http://www.nxp.com/pip/PCF8591_6.html Authors: - Aurelien Jarno - valuable contributions by Jan M. Sendler , - Jean Delvare + - Aurelien Jarno + - valuable contributions by Jan M. Sendler , + - Jean Delvare Description @@ -22,24 +27,25 @@ analog output) for the I2C bus produced by Philips Semiconductors (now NXP). It is designed to provide a byte I2C interface to up to 4 separate devices. The PCF8591 has 4 analog inputs programmable as single-ended or -differential inputs : +differential inputs: + - mode 0 : four single ended inputs - Pins AIN0 to AIN3 are single ended inputs for channels 0 to 3 + Pins AIN0 to AIN3 are single ended inputs for channels 0 to 3 - mode 1 : three differential inputs - Pins AIN3 is the common negative differential input - Pins AIN0 to AIN2 are positive differential inputs for channels 0 to 2 + Pins AIN3 is the common negative differential input + Pins AIN0 to AIN2 are positive differential inputs for channels 0 to 2 - mode 2 : single ended and differential mixed - Pins AIN0 and AIN1 are single ended inputs for channels 0 and 1 - Pins AIN2 is the positive differential input for channel 3 - Pins AIN3 is the negative differential input for channel 3 + Pins AIN0 and AIN1 are single ended inputs for channels 0 and 1 + Pins AIN2 is the positive differential input for channel 3 + Pins AIN3 is the negative differential input for channel 3 - mode 3 : two differential inputs - Pins AIN0 is the positive differential input for channel 0 - Pins AIN1 is the negative differential input for channel 0 - Pins AIN2 is the positive differential input for channel 1 - Pins AIN3 is the negative differential input for channel 1 + Pins AIN0 is the positive differential input for channel 0 + Pins AIN1 is the negative differential input for channel 0 + Pins AIN2 is the positive differential input for channel 1 + Pins AIN3 is the negative differential input for channel 1 See the datasheet for details. @@ -49,10 +55,11 @@ Module parameters * input_mode int Analog input mode: - 0 = four single ended inputs - 1 = three differential inputs - 2 = single ended and differential mixed - 3 = two differential inputs + + - 0 = four single ended inputs + - 1 = three differential inputs + - 2 = single ended and differential mixed + - 3 = two differential inputs Accessing PCF8591 via /sys interface @@ -67,11 +74,12 @@ for details. Directories are being created for each instantiated PCF8591: /sys/bus/i2c/devices/<0>-<1>/ -where <0> is the bus the chip is connected to (e. g. i2c-0) -and <1> the chip address ([48..4f]) + where <0> is the bus the chip is connected to (e. g. i2c-0) + and <1> the chip address ([48..4f]) Inside these directories, there are such files: -in0_input, in1_input, in2_input, in3_input, out0_enable, out0_output, name + + in0_input, in1_input, in2_input, in3_input, out0_enable, out0_output, name Name contains chip name. diff --git a/Documentation/hwmon/powr1220 b/Documentation/hwmon/powr1220 index 21e44f71ae6e..a7fc258da0a8 100644 --- a/Documentation/hwmon/powr1220 +++ b/Documentation/hwmon/powr1220 @@ -1,12 +1,17 @@ Kernel driver powr1220 -================== +====================== Supported chips: + * Lattice POWR1220AT8 + Prefix: 'powr1220' + Addresses scanned: none + Datasheet: Publicly available at the Lattice website - http://www.latticesemi.com/ + + http://www.latticesemi.com/ Author: Scott Kanowitz @@ -26,7 +31,9 @@ value over the low measurement range maximum of 2 V. The input naming convention is as follows: +============== ======== driver name pin name +============== ======== in0 VMON1 in1 VMON2 in2 VMON3 @@ -41,5 +48,6 @@ in10 VMON11 in11 VMON12 in12 VCCA in13 VCCINP +============== ======== The ADC readings are updated on request with a minimum period of 1s. diff --git a/Documentation/hwmon/raspberrypi-hwmon b/Documentation/hwmon/raspberrypi-hwmon index 3c92e2cb52d6..8038ade36490 100644 --- a/Documentation/hwmon/raspberrypi-hwmon +++ b/Documentation/hwmon/raspberrypi-hwmon @@ -2,6 +2,7 @@ Kernel driver raspberrypi-hwmon =============================== Supported boards: + * Raspberry Pi A+ (via GPIO on SoC) * Raspberry Pi B+ (via GPIO on SoC) * Raspberry Pi 2 B (via GPIO on SoC) @@ -19,4 +20,6 @@ undervoltage conditions. Sysfs entries ------------- +======================= ================== in0_lcrit_alarm Undervoltage alarm +======================= ================== diff --git a/Documentation/hwmon/sch5636 b/Documentation/hwmon/sch5636 index 7b0a01da0717..4aaee3672f13 100644 --- a/Documentation/hwmon/sch5636 +++ b/Documentation/hwmon/sch5636 @@ -2,8 +2,11 @@ Kernel driver sch5636 ===================== Supported chips: + * SMSC SCH5636 + Prefix: 'sch5636' + Addresses scanned: none, address read from Super I/O config space Author: Hans de Goede diff --git a/Documentation/hwmon/scpi-hwmon b/Documentation/hwmon/scpi-hwmon index 4cfcdf2d5eab..eee7022b44db 100644 --- a/Documentation/hwmon/scpi-hwmon +++ b/Documentation/hwmon/scpi-hwmon @@ -2,8 +2,11 @@ Kernel driver scpi-hwmon ======================== Supported chips: + * Chips based on ARM System Control Processor Interface + Addresses scanned: - + Datasheet: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0922b/index.html Author: Punit Agrawal @@ -14,7 +17,7 @@ Description This driver supports hardware monitoring for SoC's based on the ARM System Control Processor (SCP) implementing the System Control Processor Interface (SCPI). The following sensor types are supported -by the SCP - +by the SCP: * temperature * voltage @@ -30,4 +33,4 @@ Usage Notes The driver relies on device tree node to indicate the presence of SCPI support in the kernel. See Documentation/devicetree/bindings/arm/arm,scpi.txt for details of the -devicetree node. \ No newline at end of file +devicetree node. diff --git a/Documentation/hwmon/sht15 b/Documentation/hwmon/sht15 index 5e3207c3b177..485abe037f6c 100644 --- a/Documentation/hwmon/sht15 +++ b/Documentation/hwmon/sht15 @@ -2,29 +2,37 @@ Kernel driver sht15 =================== Authors: + * Wouter Horre * Jonathan Cameron * Vivien Didelot * Jerome Oufella Supported chips: + * Sensirion SHT10 + Prefix: 'sht10' * Sensirion SHT11 + Prefix: 'sht11' * Sensirion SHT15 + Prefix: 'sht15' * Sensirion SHT71 + Prefix: 'sht71' * Sensirion SHT75 + Prefix: 'sht75' Datasheet: Publicly available at the Sensirion website -http://www.sensirion.ch/en/pdf/product_information/Datasheet-humidity-sensor-SHT1x.pdf + + http://www.sensirion.ch/en/pdf/product_information/Datasheet-humidity-sensor-SHT1x.pdf Description ----------- @@ -63,11 +71,13 @@ Platform data Sysfs interface --------------- -* temp1_input: temperature input -* humidity1_input: humidity input -* heater_enable: write 1 in this attribute to enable the on-chip heater, - 0 to disable it. Be careful not to enable the heater - for too long. -* temp1_fault: if 1, this means that the voltage is low (below 2.47V) and - measurement may be invalid. -* humidity1_fault: same as temp1_fault. +================== ========================================================== +temp1_input temperature input +humidity1_input humidity input +heater_enable write 1 in this attribute to enable the on-chip heater, + 0 to disable it. Be careful not to enable the heater + for too long. +temp1_fault if 1, this means that the voltage is low (below 2.47V) and + measurement may be invalid. +humidity1_fault same as temp1_fault. +================== ========================================================== diff --git a/Documentation/hwmon/sht21 b/Documentation/hwmon/sht21 index 8b3cdda541c1..f1f5da030108 100644 --- a/Documentation/hwmon/sht21 +++ b/Documentation/hwmon/sht21 @@ -2,19 +2,33 @@ Kernel driver sht21 =================== Supported chips: + * Sensirion SHT21 + Prefix: 'sht21' + Addresses scanned: none + Datasheet: Publicly available at the Sensirion website + http://www.sensirion.com/file/datasheet_sht21 + + * Sensirion SHT25 + Prefix: 'sht25' + Addresses scanned: none + Datasheet: Publicly available at the Sensirion website + http://www.sensirion.com/file/datasheet_sht25 + + Author: + Urs Fleisch Description @@ -33,9 +47,13 @@ in the board setup code. sysfs-Interface --------------- -temp1_input - temperature input -humidity1_input - humidity input -eic - Electronic Identification Code +temp1_input + - temperature input + +humidity1_input + - humidity input +eic + - Electronic Identification Code Notes ----- diff --git a/Documentation/hwmon/sht3x b/Documentation/hwmon/sht3x index d9daa6ab1e8e..978a7117e4b2 100644 --- a/Documentation/hwmon/sht3x +++ b/Documentation/hwmon/sht3x @@ -2,14 +2,19 @@ Kernel driver sht3x =================== Supported chips: + * Sensirion SHT3x-DIS + Prefix: 'sht3x' + Addresses scanned: none + Datasheet: https://www.sensirion.com/file/datasheet_sht3x_digital Author: - David Frey - Pascal Sachs + + - David Frey + - Pascal Sachs Description ----------- @@ -24,6 +29,7 @@ addresses 0x44 or 0x45, depending on the wiring. See Documentation/i2c/instantiating-devices for methods to instantiate the device. There are two options configurable by means of sht3x_platform_data: + 1. blocking (pull the I2C clock line down while performing the measurement) or non-blocking mode. Blocking mode will guarantee the fastest result but the I2C bus will be busy during that time. By default, non-blocking mode @@ -35,12 +41,15 @@ There are two options configurable by means of sht3x_platform_data: The sht3x sensor supports a single shot mode as well as 5 periodic measure modes, which can be controlled with the update_interval sysfs interface. The allowed update_interval in milliseconds are as follows: - * 0 single shot mode - * 2000 0.5 Hz periodic measurement - * 1000 1 Hz periodic measurement - * 500 2 Hz periodic measurement - * 250 4 Hz periodic measurement - * 100 10 Hz periodic measurement + + ===== ======= ==================== + 0 single shot mode + 2000 0.5 Hz periodic measurement + 1000 1 Hz periodic measurement + 500 2 Hz periodic measurement + 250 4 Hz periodic measurement + 100 10 Hz periodic measurement + ===== ======= ==================== In the periodic measure mode, the sensor automatically triggers a measurement with the configured update interval on the chip. When a temperature or humidity @@ -53,6 +62,7 @@ low. sysfs-Interface --------------- +=================== ============================================================ temp1_input: temperature input humidity1_input: humidity input temp1_max: temperature max value @@ -64,13 +74,15 @@ temp1_min_hyst: temperature hysteresis value for min limit humidity1_min: humidity min value humidity1_min_hyst: humidity hysteresis value for min limit temp1_alarm: alarm flag is set to 1 if the temperature is outside the - configured limits. Alarm only works in periodic measure mode + configured limits. Alarm only works in periodic measure mode humidity1_alarm: alarm flag is set to 1 if the humidity is outside the - configured limits. Alarm only works in periodic measure mode + configured limits. Alarm only works in periodic measure mode heater_enable: heater enable, heating element removes excess humidity from - sensor - 0: turned off - 1: turned on + sensor: + + - 0: turned off + - 1: turned on update_interval: update interval, 0 for single shot, interval in msec - for periodic measurement. If the interval is not supported - by the sensor, the next faster interval is chosen + for periodic measurement. If the interval is not supported + by the sensor, the next faster interval is chosen +=================== ============================================================ diff --git a/Documentation/hwmon/shtc1 b/Documentation/hwmon/shtc1 index 6b1e05458f0f..aa116332ba26 100644 --- a/Documentation/hwmon/shtc1 +++ b/Documentation/hwmon/shtc1 @@ -2,17 +2,29 @@ Kernel driver shtc1 =================== Supported chips: + * Sensirion SHTC1 + Prefix: 'shtc1' + Addresses scanned: none + Datasheet: http://www.sensirion.com/file/datasheet_shtc1 + + * Sensirion SHTW1 + Prefix: 'shtw1' + Addresses scanned: none + Datasheet: Not publicly available + + Author: + Johannes Winkelmann Description @@ -28,6 +40,7 @@ address 0x70. See Documentation/i2c/instantiating-devices for methods to instantiate the device. There are two options configurable by means of shtc1_platform_data: + 1. blocking (pull the I2C clock line down while performing the measurement) or non-blocking mode. Blocking mode will guarantee the fastest result but the I2C bus will be busy during that time. By default, non-blocking mode @@ -39,5 +52,7 @@ There are two options configurable by means of shtc1_platform_data: sysfs-Interface --------------- -temp1_input - temperature input -humidity1_input - humidity input +temp1_input + - temperature input +humidity1_input + - humidity input diff --git a/Documentation/hwmon/sis5595 b/Documentation/hwmon/sis5595 index 4f8877a34f37..5acba6b0c0db 100644 --- a/Documentation/hwmon/sis5595 +++ b/Documentation/hwmon/sis5595 @@ -2,49 +2,67 @@ Kernel driver sis5595 ===================== Supported chips: + * Silicon Integrated Systems Corp. SiS5595 Southbridge Hardware Monitor + Prefix: 'sis5595' + Addresses scanned: ISA in PCI-space encoded address + Datasheet: Publicly available at the Silicon Integrated Systems Corp. site. + + Authors: - Kyösti Mälkki , - Mark D. Studebaker , - Aurelien Jarno 2.6 port + + - Kyösti Mälkki , + - Mark D. Studebaker , + - Aurelien Jarno 2.6 port SiS southbridge has a LM78-like chip integrated on the same IC. This driver is a customized copy of lm78.c Supports following revisions: + + =============== =============== ============== Version PCI ID PCI Revision + =============== =============== ============== 1 1039/0008 AF or less 2 1039/0008 B0 or greater + =============== =============== ============== Note: these chips contain a 0008 device which is incompatible with the - 5595. We recognize these by the presence of the listed - "blacklist" PCI ID and refuse to load. + 5595. We recognize these by the presence of the listed + "blacklist" PCI ID and refuse to load. + =================== =============== ================ NOT SUPPORTED PCI ID BLACKLIST PCI ID - 540 0008 0540 - 550 0008 0550 + =================== =============== ================ + 540 0008 0540 + 550 0008 0550 5513 0008 5511 5581 0008 5597 5582 0008 5597 5597 0008 5597 - 630 0008 0630 - 645 0008 0645 - 730 0008 0730 - 735 0008 0735 + 630 0008 0630 + 645 0008 0645 + 730 0008 0730 + 735 0008 0735 + =================== =============== ================ Module Parameters ----------------- + +======================= ===================================================== force_addr=0xaddr Set the I/O base address. Useful for boards that don't set the address in the BIOS. Does not do a PCI force; the device must still be present in lspci. Don't use this unless the driver complains that the base address is not set. + Example: 'modprobe sis5595 force_addr=0x290' +======================= ===================================================== Description diff --git a/Documentation/hwmon/smsc47b397 b/Documentation/hwmon/smsc47b397 index 3a43b6948924..600194cf1804 100644 --- a/Documentation/hwmon/smsc47b397 +++ b/Documentation/hwmon/smsc47b397 @@ -2,29 +2,38 @@ Kernel driver smsc47b397 ======================== Supported chips: + * SMSC LPC47B397-NC + * SMSC SCH5307-NS + * SMSC SCH5317 + Prefix: 'smsc47b397' + Addresses scanned: none, address read from Super I/O config space + Datasheet: In this file -Authors: Mark M. Hoffman - Utilitek Systems, Inc. +Authors: + + - Mark M. Hoffman + - Utilitek Systems, Inc. November 23, 2004 -The following specification describes the SMSC LPC47B397-NC[1] sensor chip +The following specification describes the SMSC LPC47B397-NC [1]_ sensor chip (for which there is no public datasheet available). This document was provided by Craig Kelly (In-Store Broadcast Network) and edited/corrected by Mark M. Hoffman . -[1] And SMSC SCH5307-NS and SCH5317, which have different device IDs but are -otherwise compatible. +.. [1] And SMSC SCH5307-NS and SCH5317, which have different device IDs but are + otherwise compatible. -* * * * * +------------------------------------------------------------------------- -Methods for detecting the HP SIO and reading the thermal data on a dc7100. +Methods for detecting the HP SIO and reading the thermal data on a dc7100 +------------------------------------------------------------------------- The thermal information on the dc7100 is contained in the SIO Hardware Monitor (HWM). The information is accessed through an index/data pair. The index/data @@ -35,18 +44,22 @@ and 0x61 (LSB). Currently we are using 0x480 for the HWM Base Address and Reading temperature information. The temperature information is located in the following registers: + +=============== ======= ======================================================= Temp1 0x25 (Currently, this reflects the CPU temp on all systems). Temp2 0x26 Temp3 0x27 Temp4 0x80 +=============== ======= ======================================================= Programming Example -The following is an example of how to read the HWM temperature registers: -MOV DX,480H -MOV AX,25H -OUT DX,AL -MOV DX,481H -IN AL,DX +The following is an example of how to read the HWM temperature registers:: + + MOV DX,480H + MOV AX,25H + OUT DX,AL + MOV DX,481H + IN AL,DX AL contains the data in hex, the temperature in Celsius is the decimal equivalent. @@ -55,25 +68,32 @@ Ex: If AL contains 0x2A, the temperature is 42 degrees C. Reading tach information. The fan speed information is located in the following registers: + +=============== ======= ======= ================================= LSB MSB Tach1 0x28 0x29 (Currently, this reflects the CPU fan speed on all systems). Tach2 0x2A 0x2B Tach3 0x2C 0x2D Tach4 0x2E 0x2F +=============== ======= ======= ================================= -Important!!! -Reading the tach LSB locks the tach MSB. -The LSB Must be read first. +.. Important:: + + Reading the tach LSB locks the tach MSB. + The LSB Must be read first. + +How to convert the tach reading to RPM +-------------------------------------- -How to convert the tach reading to RPM. The tach reading (TCount) is given by: (Tach MSB * 256) + (Tach LSB) The SIO counts the number of 90kHz (11.111us) pulses per revolution. RPM = 60/(TCount * 11.111us) -Example: -Reg 0x28 = 0x9B -Reg 0x29 = 0x08 +Example:: + + Reg 0x28 = 0x9B + Reg 0x29 = 0x08 TCount = 0x89B = 2203 @@ -81,21 +101,28 @@ RPM = 60 / (2203 * 11.11111 E-6) = 2451 RPM Obtaining the SIO version. -CONFIGURATION SEQUENCE +Configuration Sequence +---------------------- + To program the configuration registers, the following sequence must be followed: 1. Enter Configuration Mode 2. Configure the Configuration Registers 3. Exit Configuration Mode. Enter Configuration Mode +^^^^^^^^^^^^^^^^^^^^^^^^ + To place the chip into the Configuration State The config key (0x55) is written to the CONFIG PORT (0x2E). Configuration Mode +^^^^^^^^^^^^^^^^^^ + In configuration mode, the INDEX PORT is located at the CONFIG PORT address and the DATA PORT is at INDEX PORT address + 1. The desired configuration registers are accessed in two steps: + a. Write the index of the Logical Device Number Configuration Register (i.e., 0x07) to the INDEX PORT and then write the number of the desired logical device to the DATA PORT. @@ -104,30 +131,35 @@ b. Write the address of the desired configuration register within the logical device to the INDEX PORT and then write or read the config- uration register through the DATA PORT. -Note: If accessing the Global Configuration Registers, step (a) is not required. +Note: + If accessing the Global Configuration Registers, step (a) is not required. Exit Configuration Mode +^^^^^^^^^^^^^^^^^^^^^^^ + To exit the Configuration State the write 0xAA to the CONFIG PORT (0x2E). The chip returns to the RUN State. (This is important). Programming Example -The following is an example of how to read the SIO Device ID located at 0x20 +^^^^^^^^^^^^^^^^^^^ -; ENTER CONFIGURATION MODE -MOV DX,02EH -MOV AX,055H -OUT DX,AL -; GLOBAL CONFIGURATION REGISTER -MOV DX,02EH -MOV AL,20H -OUT DX,AL -; READ THE DATA -MOV DX,02FH -IN AL,DX -; EXIT CONFIGURATION MODE -MOV DX,02EH -MOV AX,0AAH -OUT DX,AL +The following is an example of how to read the SIO Device ID located at 0x20: + + ; ENTER CONFIGURATION MODE + MOV DX,02EH + MOV AX,055H + OUT DX,AL + ; GLOBAL CONFIGURATION REGISTER + MOV DX,02EH + MOV AL,20H + OUT DX,AL + ; READ THE DATA + MOV DX,02FH + IN AL,DX + ; EXIT CONFIGURATION MODE + MOV DX,02EH + MOV AX,0AAH + OUT DX,AL The registers of interest for identifying the SIO on the dc7100 are Device ID (0x20) and Device Rev (0x21). @@ -135,29 +167,31 @@ The registers of interest for identifying the SIO on the dc7100 are Device ID The Device ID will read 0x6F (0x81 for SCH5307-NS, and 0x85 for SCH5317) The Device Rev currently reads 0x01 -Obtaining the HWM Base Address. -The following is an example of how to read the HWM Base Address located in -Logical Device 8. +Obtaining the HWM Base Address +------------------------------ -; ENTER CONFIGURATION MODE -MOV DX,02EH -MOV AX,055H -OUT DX,AL -; CONFIGURE REGISTER CRE0, -; LOGICAL DEVICE 8 -MOV DX,02EH -MOV AL,07H -OUT DX,AL ;Point to LD# Config Reg -MOV DX,02FH -MOV AL, 08H -OUT DX,AL;Point to Logical Device 8 -; -MOV DX,02EH -MOV AL,60H -OUT DX,AL ; Point to HWM Base Addr MSB -MOV DX,02FH -IN AL,DX ; Get MSB of HWM Base Addr -; EXIT CONFIGURATION MODE -MOV DX,02EH -MOV AX,0AAH -OUT DX,AL +The following is an example of how to read the HWM Base Address located in +Logical Device 8:: + + ; ENTER CONFIGURATION MODE + MOV DX,02EH + MOV AX,055H + OUT DX,AL + ; CONFIGURE REGISTER CRE0, + ; LOGICAL DEVICE 8 + MOV DX,02EH + MOV AL,07H + OUT DX,AL ;Point to LD# Config Reg + MOV DX,02FH + MOV AL, 08H + OUT DX,AL;Point to Logical Device 8 + ; + MOV DX,02EH + MOV AL,60H + OUT DX,AL ; Point to HWM Base Addr MSB + MOV DX,02FH + IN AL,DX ; Get MSB of HWM Base Addr + ; EXIT CONFIGURATION MODE + MOV DX,02EH + MOV AX,0AAH + OUT DX,AL diff --git a/Documentation/hwmon/smsc47m1 b/Documentation/hwmon/smsc47m1 index 10a24b420686..c54eabd5eb57 100644 --- a/Documentation/hwmon/smsc47m1 +++ b/Documentation/hwmon/smsc47m1 @@ -2,30 +2,53 @@ Kernel driver smsc47m1 ====================== Supported chips: + * SMSC LPC47B27x, LPC47M112, LPC47M10x, LPC47M13x, LPC47M14x, + LPC47M15x and LPC47M192 + Addresses scanned: none, address read from Super I/O config space + Prefix: 'smsc47m1' + Datasheets: - http://www.smsc.com/media/Downloads_Public/Data_Sheets/47b272.pdf - http://www.smsc.com/media/Downloads_Public/Data_Sheets/47m10x.pdf - http://www.smsc.com/media/Downloads_Public/Data_Sheets/47m112.pdf - http://www.smsc.com/ + + http://www.smsc.com/media/Downloads_Public/Data_Sheets/47b272.pdf + + http://www.smsc.com/media/Downloads_Public/Data_Sheets/47m10x.pdf + + http://www.smsc.com/media/Downloads_Public/Data_Sheets/47m112.pdf + + http://www.smsc.com/ + * SMSC LPC47M292 + Addresses scanned: none, address read from Super I/O config space + Prefix: 'smsc47m2' + Datasheet: Not public + * SMSC LPC47M997 + Addresses scanned: none, address read from Super I/O config space + Prefix: 'smsc47m1' + Datasheet: none + + Authors: - Mark D. Studebaker , - With assistance from Bruce Allen , and his - fan.c program: http://www.lsc-group.phys.uwm.edu/%7Eballen/driver/ - Gabriele Gorla , - Jean Delvare + + - Mark D. Studebaker , + - With assistance from Bruce Allen , and his + fan.c program: + + - http://www.lsc-group.phys.uwm.edu/%7Eballen/driver/ + + - Gabriele Gorla , + - Jean Delvare Description ----------- @@ -57,7 +80,7 @@ hardware registers are read whenever any data is read (unless it is less than 1.5 seconds since the last update). This means that you can easily miss once-only alarms. +------------------------------------------------------------------ -********************** The lm_sensors project gratefully acknowledges the support of Intel in the development of this driver. diff --git a/Documentation/hwmon/smsc47m192 b/Documentation/hwmon/smsc47m192 index 6d54ecb7b3f8..a2e86ab67918 100644 --- a/Documentation/hwmon/smsc47m192 +++ b/Documentation/hwmon/smsc47m192 @@ -2,17 +2,28 @@ Kernel driver smsc47m192 ======================== Supported chips: - * SMSC LPC47M192, LPC47M15x, LPC47M292 and LPC47M997 - Prefix: 'smsc47m192' - Addresses scanned: I2C 0x2c - 0x2d - Datasheet: The datasheet for LPC47M192 is publicly available from - http://www.smsc.com/ - The LPC47M15x, LPC47M292 and LPC47M997 are compatible for - hardware monitoring. -Author: Hartmut Rick - Special thanks to Jean Delvare for careful checking - of the code and many helpful comments and suggestions. + * SMSC LPC47M192, LPC47M15x, LPC47M292 and LPC47M997 + + Prefix: 'smsc47m192' + + Addresses scanned: I2C 0x2c - 0x2d + + Datasheet: The datasheet for LPC47M192 is publicly available from + + http://www.smsc.com/ + + The LPC47M15x, LPC47M292 and LPC47M997 are compatible for + + hardware monitoring. + + + +Author: + - Hartmut Rick + + - Special thanks to Jean Delvare for careful checking + of the code and many helpful comments and suggestions. Description @@ -52,52 +63,54 @@ Reading them more often repeats the same values. sysfs interface --------------- -in0_input - +2.5V voltage input -in1_input - CPU voltage input (nominal 2.25V) -in2_input - +3.3V voltage input -in3_input - +5V voltage input -in4_input - +12V voltage input (may be missing if used as VID4) -in5_input - Vcc voltage input (nominal 3.3V) - This is the supply voltage of the sensor chip itself. -in6_input - +1.5V voltage input -in7_input - +1.8V voltage input +===================== ========================================================== +in0_input +2.5V voltage input +in1_input CPU voltage input (nominal 2.25V) +in2_input +3.3V voltage input +in3_input +5V voltage input +in4_input +12V voltage input (may be missing if used as VID4) +in5_input Vcc voltage input (nominal 3.3V) + This is the supply voltage of the sensor chip itself. +in6_input +1.5V voltage input +in7_input +1.8V voltage input in[0-7]_min, -in[0-7]_max - lower and upper alarm thresholds for in[0-7]_input reading +in[0-7]_max lower and upper alarm thresholds for in[0-7]_input reading - All voltages are read and written in mV. + All voltages are read and written in mV. -in[0-7]_alarm - alarm flags for voltage inputs - These files read '1' in case of alarm, '0' otherwise. +in[0-7]_alarm alarm flags for voltage inputs + These files read '1' in case of alarm, '0' otherwise. -temp1_input - chip temperature measured by on-chip diode -temp[2-3]_input - temperature measured by external diodes (one of these would - typically be wired to the diode inside the CPU) +temp1_input chip temperature measured by on-chip diode +temp[2-3]_input temperature measured by external diodes (one of these + would typically be wired to the diode inside the CPU) temp[1-3]_min, -temp[1-3]_max - lower and upper alarm thresholds for temperatures +temp[1-3]_max lower and upper alarm thresholds for temperatures -temp[1-3]_offset - temperature offset registers - The chip adds the offsets stored in these registers to - the corresponding temperature readings. - Note that temp1 and temp2 offsets share the same register, - they cannot both be different from zero at the same time. - Writing a non-zero number to one of them will reset the other - offset to zero. +temp[1-3]_offset temperature offset registers + The chip adds the offsets stored in these registers to + the corresponding temperature readings. + Note that temp1 and temp2 offsets share the same register, + they cannot both be different from zero at the same time. + Writing a non-zero number to one of them will reset the other + offset to zero. - All temperatures and offsets are read and written in - units of 0.001 degC. + All temperatures and offsets are read and written in + units of 0.001 degC. -temp[1-3]_alarm - alarm flags for temperature inputs, '1' in case of alarm, - '0' otherwise. -temp[2-3]_input_fault - diode fault flags for temperature inputs 2 and 3. - A fault is detected if the two pins for the corresponding - sensor are open or shorted, or any of the two is shorted - to ground or Vcc. '1' indicates a diode fault. +temp[1-3]_alarm alarm flags for temperature inputs, '1' in case of alarm, + '0' otherwise. +temp[2-3]_input_fault diode fault flags for temperature inputs 2 and 3. + A fault is detected if the two pins for the corresponding + sensor are open or shorted, or any of the two is shorted + to ground or Vcc. '1' indicates a diode fault. -cpu0_vid - CPU voltage as received from the CPU +cpu0_vid CPU voltage as received from the CPU -vrm - CPU VID standard used for decoding CPU voltage +vrm CPU VID standard used for decoding CPU voltage +===================== ========================================================== - The *_min, *_max, *_offset and vrm files can be read and - written, all others are read-only. +The `*_min`, `*_max`, `*_offset` and `vrm` files can be read and written, +all others are read-only. diff --git a/Documentation/hwmon/submitting-patches b/Documentation/hwmon/submitting-patches index f88221b46153..12540b7d9b50 100644 --- a/Documentation/hwmon/submitting-patches +++ b/Documentation/hwmon/submitting-patches @@ -1,5 +1,5 @@ - How to Get Your Patch Accepted Into the Hwmon Subsystem - ------------------------------------------------------- +How to Get Your Patch Accepted Into the Hwmon Subsystem +======================================================= This text is a collection of suggestions for people writing patches or drivers for the hwmon subsystem. Following these suggestions will greatly @@ -9,11 +9,12 @@ increase the chances of your change being accepted. 1. General ---------- -* It should be unnecessary to mention, but please read and follow - Documentation/process/submit-checklist.rst - Documentation/process/submitting-drivers.rst - Documentation/process/submitting-patches.rst - Documentation/process/coding-style.rst +* It should be unnecessary to mention, but please read and follow: + + - Documentation/process/submit-checklist.rst + - Documentation/process/submitting-drivers.rst + - Documentation/process/submitting-patches.rst + - Documentation/process/coding-style.rst * Please run your patch through 'checkpatch --strict'. There should be no errors, no warnings, and few if any check messages. If there are any diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface index 7b91706d01c8..fd590633bb14 100644 --- a/Documentation/hwmon/sysfs-interface +++ b/Documentation/hwmon/sysfs-interface @@ -1,5 +1,5 @@ Naming and data format standards for sysfs files ------------------------------------------------- +================================================ The libsensors library offers an interface to the raw sensors data through the sysfs interface. Since lm-sensors 3.0.0, libsensors is @@ -32,7 +32,7 @@ this reason, it is still not recommended to bypass the library. Each chip gets its own directory in the sysfs /sys/devices tree. To find all sensor chips, it is easier to follow the device symlinks from -/sys/class/hwmon/hwmon*. +`/sys/class/hwmon/hwmon*`. Up to lm-sensors 3.0.0, libsensors looks for hardware monitoring attributes in the "physical" device directory. Since lm-sensors 3.0.1, attributes found @@ -67,11 +67,13 @@ are interpreted as 0! For more on how written strings are interpreted see the ------------------------------------------------------------------------- -[0-*] denotes any positive number starting from 0 -[1-*] denotes any positive number starting from 1 +======= =========================================== +`[0-*]` denotes any positive number starting from 0 +`[1-*]` denotes any positive number starting from 1 RO read only value WO write only value RW read/write value +======= =========================================== Read/write values may be read-only for some chips, depending on the hardware implementation. @@ -80,57 +82,82 @@ All entries (except name) are optional, and should only be created in a given driver if the chip has the feature. -********************* -* Global attributes * -********************* +***************** +Global attributes +***************** -name The chip name. +`name` + The chip name. This should be a short, lowercase string, not containing whitespace, dashes, or the wildcard character '*'. This attribute represents the chip name. It is the only mandatory attribute. I2C devices get this attribute created automatically. + RO -update_interval The interval at which the chip will update readings. +`update_interval` + The interval at which the chip will update readings. Unit: millisecond + RW + Some devices have a variable update rate or interval. This attribute can be used to change it to the desired value. -************ -* Voltages * -************ +******** +Voltages +******** + +`in[0-*]_min` + Voltage min value. -in[0-*]_min Voltage min value. Unit: millivolt + RW - -in[0-*]_lcrit Voltage critical min value. + +`in[0-*]_lcrit` + Voltage critical min value. + Unit: millivolt + RW + If voltage drops to or below this limit, the system may take drastic action such as power down or reset. At the very least, it should report a fault. -in[0-*]_max Voltage max value. +`in[0-*]_max` + Voltage max value. + Unit: millivolt + RW - -in[0-*]_crit Voltage critical max value. + +`in[0-*]_crit` + Voltage critical max value. + Unit: millivolt + RW + If voltage reaches or exceeds this limit, the system may take drastic action such as power down or reset. At the very least, it should report a fault. -in[0-*]_input Voltage input value. +`in[0-*]_input` + Voltage input value. + Unit: millivolt + RO + Voltage measured on the chip pin. + Actual voltage depends on the scaling resistors on the motherboard, as recommended in the chip datasheet. + This varies by chip and by motherboard. Because of this variation, values are generally NOT scaled by the chip driver, and must be done by the application. @@ -140,166 +167,232 @@ in[0-*]_input Voltage input value. thumb: drivers should report the voltage values at the "pins" of the chip. -in[0-*]_average +`in[0-*]_average` Average voltage + Unit: millivolt + RO -in[0-*]_lowest +`in[0-*]_lowest` Historical minimum voltage + Unit: millivolt + RO -in[0-*]_highest +`in[0-*]_highest` Historical maximum voltage + Unit: millivolt + RO -in[0-*]_reset_history +`in[0-*]_reset_history` Reset inX_lowest and inX_highest + WO -in_reset_history +`in_reset_history` Reset inX_lowest and inX_highest for all sensors + WO -in[0-*]_label Suggested voltage channel label. +`in[0-*]_label` + Suggested voltage channel label. + Text string + Should only be created if the driver has hints about what this voltage channel is being used for, and user-space doesn't. In all other cases, the label is provided by user-space. + RO -in[0-*]_enable +`in[0-*]_enable` Enable or disable the sensors. + When disabled the sensor read will return -ENODATA. - 1: Enable - 0: Disable + + - 1: Enable + - 0: Disable + RW -cpu[0-*]_vid CPU core reference voltage. +`cpu[0-*]_vid` + CPU core reference voltage. + Unit: millivolt + RO + Not always correct. -vrm Voltage Regulator Module version number. +`vrm` + Voltage Regulator Module version number. + RW (but changing it should no more be necessary) + Originally the VRM standard version multiplied by 10, but now an arbitrary number, as not all standards have a version number. + Affects the way the driver calculates the CPU core reference voltage from the vid pins. Also see the Alarms section for status flags associated with voltages. -******** -* Fans * -******** +**** +Fans +**** + +`fan[1-*]_min` + Fan minimum value -fan[1-*]_min Fan minimum value Unit: revolution/min (RPM) + RW -fan[1-*]_max Fan maximum value +`fan[1-*]_max` + Fan maximum value + Unit: revolution/min (RPM) + Only rarely supported by the hardware. RW -fan[1-*]_input Fan input value. +`fan[1-*]_input` + Fan input value. + Unit: revolution/min (RPM) + RO -fan[1-*]_div Fan divisor. +`fan[1-*]_div` + Fan divisor. + Integer value in powers of two (1, 2, 4, 8, 16, 32, 64, 128). + RW + Some chips only support values 1, 2, 4 and 8. Note that this is actually an internal clock divisor, which affects the measurable speed range, not the read value. -fan[1-*]_pulses Number of tachometer pulses per fan revolution. +`fan[1-*]_pulses` + Number of tachometer pulses per fan revolution. + Integer value, typically between 1 and 4. + RW + This value is a characteristic of the fan connected to the device's input, so it has to be set in accordance with the fan model. + Should only be created if the chip has a register to configure the number of pulses. In the absence of such a register (and thus attribute) the value assumed by all devices is 2 pulses per fan revolution. -fan[1-*]_target +`fan[1-*]_target` Desired fan speed + Unit: revolution/min (RPM) + RW + Only makes sense if the chip supports closed-loop fan speed control based on the measured fan speed. -fan[1-*]_label Suggested fan channel label. +`fan[1-*]_label` + Suggested fan channel label. + Text string + Should only be created if the driver has hints about what this fan channel is being used for, and user-space doesn't. In all other cases, the label is provided by user-space. + RO -fan[1-*]_enable +`fan[1-*]_enable` Enable or disable the sensors. + When disabled the sensor read will return -ENODATA. - 1: Enable - 0: Disable + + - 1: Enable + - 0: Disable + RW Also see the Alarms section for status flags associated with fans. -******* -* PWM * -******* +*** +PWM +*** + +`pwm[1-*]` + Pulse width modulation fan control. -pwm[1-*] Pulse width modulation fan control. Integer value in the range 0 to 255 + RW + 255 is max or 100%. -pwm[1-*]_enable +`pwm[1-*]_enable` Fan speed control method: - 0: no fan speed control (i.e. fan at full speed) - 1: manual fan speed control enabled (using pwm[1-*]) - 2+: automatic fan speed control enabled + + - 0: no fan speed control (i.e. fan at full speed) + - 1: manual fan speed control enabled (using `pwm[1-*]`) + - 2+: automatic fan speed control enabled + Check individual chip documentation files for automatic mode details. + RW -pwm[1-*]_mode 0: DC mode (direct current) - 1: PWM mode (pulse-width modulation) +`pwm[1-*]_mode` + - 0: DC mode (direct current) + - 1: PWM mode (pulse-width modulation) + RW -pwm[1-*]_freq Base PWM frequency in Hz. +`pwm[1-*]_freq` + Base PWM frequency in Hz. + Only possibly available when pwmN_mode is PWM, but not always present even then. + RW -pwm[1-*]_auto_channels_temp +`pwm[1-*]_auto_channels_temp` Select which temperature channels affect this PWM output in - auto mode. Bitfield, 1 is temp1, 2 is temp2, 4 is temp3 etc... + auto mode. + + Bitfield, 1 is temp1, 2 is temp2, 4 is temp3 etc... Which values are possible depend on the chip used. + RW -pwm[1-*]_auto_point[1-*]_pwm -pwm[1-*]_auto_point[1-*]_temp -pwm[1-*]_auto_point[1-*]_temp_hyst - Define the PWM vs temperature curve. Number of trip points is - chip-dependent. Use this for chips which associate trip points - to PWM output channels. +`pwm[1-*]_auto_point[1-*]_pwm` / `pwm[1-*]_auto_point[1-*]_temp` / `pwm[1-*]_auto_point[1-*]_temp_hyst` + Define the PWM vs temperature curve. + + Number of trip points is chip-dependent. Use this for chips + which associate trip points to PWM output channels. + RW -temp[1-*]_auto_point[1-*]_pwm -temp[1-*]_auto_point[1-*]_temp -temp[1-*]_auto_point[1-*]_temp_hyst - Define the PWM vs temperature curve. Number of trip points is - chip-dependent. Use this for chips which associate trip points - to temperature channels. +`temp[1-*]_auto_point[1-*]_pwm` / `temp[1-*]_auto_point[1-*]_temp` / `temp[1-*]_auto_point[1-*]_temp_hyst` + Define the PWM vs temperature curve. + + Number of trip points is chip-dependent. Use this for chips + which associate trip points to temperature channels. + RW There is a third case where trip points are associated to both PWM output @@ -312,122 +405,173 @@ The actual result is up to the chip, but in general the highest candidate value (fastest fan speed) wins. -**************** -* Temperatures * -**************** +************ +Temperatures +************ + +`temp[1-*]_type` + Sensor type selection. -temp[1-*]_type Sensor type selection. Integers 1 to 6 + RW - 1: CPU embedded diode - 2: 3904 transistor - 3: thermal diode - 4: thermistor - 5: AMD AMDSI - 6: Intel PECI + + - 1: CPU embedded diode + - 2: 3904 transistor + - 3: thermal diode + - 4: thermistor + - 5: AMD AMDSI + - 6: Intel PECI + Not all types are supported by all chips -temp[1-*]_max Temperature max value. +`temp[1-*]_max` + Temperature max value. + Unit: millidegree Celsius (or millivolt, see below) + RW -temp[1-*]_min Temperature min value. +`temp[1-*]_min` + Temperature min value. + Unit: millidegree Celsius + RW -temp[1-*]_max_hyst +`temp[1-*]_max_hyst` Temperature hysteresis value for max limit. + Unit: millidegree Celsius + Must be reported as an absolute temperature, NOT a delta from the max value. + RW -temp[1-*]_min_hyst +`temp[1-*]_min_hyst` Temperature hysteresis value for min limit. Unit: millidegree Celsius + Must be reported as an absolute temperature, NOT a delta from the min value. + RW -temp[1-*]_input Temperature input value. +`temp[1-*]_input` + Temperature input value. + Unit: millidegree Celsius + RO -temp[1-*]_crit Temperature critical max value, typically greater than +`temp[1-*]_crit` + Temperature critical max value, typically greater than corresponding temp_max values. + Unit: millidegree Celsius + RW -temp[1-*]_crit_hyst +`temp[1-*]_crit_hyst` Temperature hysteresis value for critical limit. + Unit: millidegree Celsius + Must be reported as an absolute temperature, NOT a delta from the critical value. + RW -temp[1-*]_emergency +`temp[1-*]_emergency` Temperature emergency max value, for chips supporting more than two upper temperature limits. Must be equal or greater than corresponding temp_crit values. + Unit: millidegree Celsius + RW -temp[1-*]_emergency_hyst +`temp[1-*]_emergency_hyst` Temperature hysteresis value for emergency limit. + Unit: millidegree Celsius + Must be reported as an absolute temperature, NOT a delta from the emergency value. + RW -temp[1-*]_lcrit Temperature critical min value, typically lower than +`temp[1-*]_lcrit` + Temperature critical min value, typically lower than corresponding temp_min values. + Unit: millidegree Celsius + RW -temp[1-*]_lcrit_hyst +`temp[1-*]_lcrit_hyst` Temperature hysteresis value for critical min limit. + Unit: millidegree Celsius + Must be reported as an absolute temperature, NOT a delta from the critical min value. + RW -temp[1-*]_offset +`temp[1-*]_offset` Temperature offset which is added to the temperature reading by the chip. + Unit: millidegree Celsius + Read/Write value. -temp[1-*]_label Suggested temperature channel label. +`temp[1-*]_label` + Suggested temperature channel label. + Text string + Should only be created if the driver has hints about what this temperature channel is being used for, and user-space doesn't. In all other cases, the label is provided by user-space. + RO -temp[1-*]_lowest +`temp[1-*]_lowest` Historical minimum temperature + Unit: millidegree Celsius + RO -temp[1-*]_highest +`temp[1-*]_highest` Historical maximum temperature + Unit: millidegree Celsius + RO -temp[1-*]_reset_history +`temp[1-*]_reset_history` Reset temp_lowest and temp_highest + WO -temp_reset_history +`temp_reset_history` Reset temp_lowest and temp_highest for all sensors + WO -temp[1-*]_enable +`temp[1-*]_enable` Enable or disable the sensors. + When disabled the sensor read will return -ENODATA. - 1: Enable - 0: Disable + + - 1: Enable + - 0: Disable + RW Some chips measure temperature using external thermistors and an ADC, and @@ -442,201 +586,300 @@ channels by the driver. Also see the Alarms section for status flags associated with temperatures. -************ -* Currents * -************ +******** +Currents +******** + +`curr[1-*]_max` + Current max value -curr[1-*]_max Current max value Unit: milliampere + RW -curr[1-*]_min Current min value. +`curr[1-*]_min` + Current min value. + Unit: milliampere + RW -curr[1-*]_lcrit Current critical low value +`curr[1-*]_lcrit` + Current critical low value + Unit: milliampere + RW -curr[1-*]_crit Current critical high value. +`curr[1-*]_crit` + Current critical high value. + Unit: milliampere + RW -curr[1-*]_input Current input value +`curr[1-*]_input` + Current input value + Unit: milliampere + RO -curr[1-*]_average +`curr[1-*]_average` Average current use + Unit: milliampere + RO -curr[1-*]_lowest +`curr[1-*]_lowest` Historical minimum current + Unit: milliampere + RO -curr[1-*]_highest +`curr[1-*]_highest` Historical maximum current Unit: milliampere RO -curr[1-*]_reset_history +`curr[1-*]_reset_history` Reset currX_lowest and currX_highest + WO -curr_reset_history +`curr_reset_history` Reset currX_lowest and currX_highest for all sensors + WO -curr[1-*]_enable +`curr[1-*]_enable` Enable or disable the sensors. + When disabled the sensor read will return -ENODATA. - 1: Enable - 0: Disable + + - 1: Enable + - 0: Disable + RW Also see the Alarms section for status flags associated with currents. -********* -* Power * -********* +***** +Power +***** + +`power[1-*]_average` + Average power use -power[1-*]_average Average power use Unit: microWatt + RO -power[1-*]_average_interval Power use averaging interval. A poll +`power[1-*]_average_interval` + Power use averaging interval. A poll notification is sent to this file if the hardware changes the averaging interval. + Unit: milliseconds + RW -power[1-*]_average_interval_max Maximum power use averaging interval +`power[1-*]_average_interval_max` + Maximum power use averaging interval + Unit: milliseconds + RO -power[1-*]_average_interval_min Minimum power use averaging interval +`power[1-*]_average_interval_min` + Minimum power use averaging interval + Unit: milliseconds + RO -power[1-*]_average_highest Historical average maximum power use +`power[1-*]_average_highest` + Historical average maximum power use + Unit: microWatt + RO -power[1-*]_average_lowest Historical average minimum power use +`power[1-*]_average_lowest` + Historical average minimum power use + Unit: microWatt + RO -power[1-*]_average_max A poll notification is sent to - power[1-*]_average when power use +`power[1-*]_average_max` + A poll notification is sent to + `power[1-*]_average` when power use rises above this value. + Unit: microWatt + RW -power[1-*]_average_min A poll notification is sent to - power[1-*]_average when power use +`power[1-*]_average_min` + A poll notification is sent to + `power[1-*]_average` when power use sinks below this value. + Unit: microWatt + RW -power[1-*]_input Instantaneous power use +`power[1-*]_input` + Instantaneous power use + Unit: microWatt + RO -power[1-*]_input_highest Historical maximum power use +`power[1-*]_input_highest` + Historical maximum power use + Unit: microWatt + RO -power[1-*]_input_lowest Historical minimum power use +`power[1-*]_input_lowest` + Historical minimum power use + Unit: microWatt + RO -power[1-*]_reset_history Reset input_highest, input_lowest, +`power[1-*]_reset_history` + Reset input_highest, input_lowest, average_highest and average_lowest. + WO -power[1-*]_accuracy Accuracy of the power meter. +`power[1-*]_accuracy` + Accuracy of the power meter. + Unit: Percent + RO -power[1-*]_cap If power use rises above this limit, the +`power[1-*]_cap` + If power use rises above this limit, the system should take action to reduce power use. A poll notification is sent to this file if the - cap is changed by the hardware. The *_cap + cap is changed by the hardware. The `*_cap` files only appear if the cap is known to be enforced by hardware. + Unit: microWatt + RW -power[1-*]_cap_hyst Margin of hysteresis built around capping and +`power[1-*]_cap_hyst` + Margin of hysteresis built around capping and notification. + Unit: microWatt + RW -power[1-*]_cap_max Maximum cap that can be set. +`power[1-*]_cap_max` + Maximum cap that can be set. + Unit: microWatt + RO -power[1-*]_cap_min Minimum cap that can be set. +`power[1-*]_cap_min` + Minimum cap that can be set. + Unit: microWatt + RO -power[1-*]_max Maximum power. +`power[1-*]_max` + Maximum power. + Unit: microWatt + RW -power[1-*]_crit Critical maximum power. +`power[1-*]_crit` + Critical maximum power. + If power rises to or above this limit, the system is expected take drastic action to reduce power consumption, such as a system shutdown or a forced powerdown of some devices. + Unit: microWatt + RW -power[1-*]_enable Enable or disable the sensors. +`power[1-*]_enable` + Enable or disable the sensors. + When disabled the sensor read will return -ENODATA. - 1: Enable - 0: Disable + + - 1: Enable + - 0: Disable + RW Also see the Alarms section for status flags associated with power readings. -********** -* Energy * -********** +****** +Energy +****** + +`energy[1-*]_input` + Cumulative energy use -energy[1-*]_input Cumulative energy use Unit: microJoule + RO -energy[1-*]_enable Enable or disable the sensors. +`energy[1-*]_enable` + Enable or disable the sensors. + When disabled the sensor read will return -ENODATA. - 1: Enable - 0: Disable + + - 1: Enable + - 0: Disable + RW -************ -* Humidity * -************ +******** +Humidity +******** + +`humidity[1-*]_input` + Humidity -humidity[1-*]_input Humidity Unit: milli-percent (per cent mille, pcm) + RO -humidity[1-*]_enable Enable or disable the sensors +`humidity[1-*]_enable` + Enable or disable the sensors + When disabled the sensor read will return -ENODATA. - 1: Enable - 0: Disable + + - 1: Enable + - 0: Disable + RW -********** -* Alarms * -********** +****** +Alarms +****** Each channel or limit may have an associated alarm file, containing a boolean value. 1 means than an alarm condition exists, 0 means no alarm. @@ -645,67 +888,67 @@ Usually a given chip will either use channel-related alarms, or limit-related alarms, not both. The driver should just reflect the hardware implementation. -in[0-*]_alarm -curr[1-*]_alarm -power[1-*]_alarm -fan[1-*]_alarm -temp[1-*]_alarm - Channel alarm - 0: no alarm - 1: alarm - RO ++-------------------------------+-----------------------+ +| **`in[0-*]_alarm`, | Channel alarm | +| `curr[1-*]_alarm`, | | +| `power[1-*]_alarm`, | - 0: no alarm | +| `fan[1-*]_alarm`, | - 1: alarm | +| `temp[1-*]_alarm`** | | +| | RO | ++-------------------------------+-----------------------+ -OR +**OR** -in[0-*]_min_alarm -in[0-*]_max_alarm -in[0-*]_lcrit_alarm -in[0-*]_crit_alarm -curr[1-*]_min_alarm -curr[1-*]_max_alarm -curr[1-*]_lcrit_alarm -curr[1-*]_crit_alarm -power[1-*]_cap_alarm -power[1-*]_max_alarm -power[1-*]_crit_alarm -fan[1-*]_min_alarm -fan[1-*]_max_alarm -temp[1-*]_min_alarm -temp[1-*]_max_alarm -temp[1-*]_lcrit_alarm -temp[1-*]_crit_alarm -temp[1-*]_emergency_alarm - Limit alarm - 0: no alarm - 1: alarm - RO ++-------------------------------+-----------------------+ +| **`in[0-*]_min_alarm`, | Limit alarm | +| `in[0-*]_max_alarm`, | | +| `in[0-*]_lcrit_alarm`, | - 0: no alarm | +| `in[0-*]_crit_alarm`, | - 1: alarm | +| `curr[1-*]_min_alarm`, | | +| `curr[1-*]_max_alarm`, | RO | +| `curr[1-*]_lcrit_alarm`, | | +| `curr[1-*]_crit_alarm`, | | +| `power[1-*]_cap_alarm`, | | +| `power[1-*]_max_alarm`, | | +| `power[1-*]_crit_alarm`, | | +| `fan[1-*]_min_alarm`, | | +| `fan[1-*]_max_alarm`, | | +| `temp[1-*]_min_alarm`, | | +| `temp[1-*]_max_alarm`, | | +| `temp[1-*]_lcrit_alarm`, | | +| `temp[1-*]_crit_alarm`, | | +| `temp[1-*]_emergency_alarm`** | | ++-------------------------------+-----------------------+ Each input channel may have an associated fault file. This can be used to notify open diodes, unconnected fans etc. where the hardware supports it. When this boolean has value 1, the measurement for that channel should not be trusted. -fan[1-*]_fault -temp[1-*]_fault +`fan[1-*]_fault` / `temp[1-*]_fault` Input fault condition - 0: no fault occurred - 1: fault condition + + - 0: no fault occurred + - 1: fault condition + RO Some chips also offer the possibility to get beeped when an alarm occurs: -beep_enable Master beep enable - 0: no beeps - 1: beeps +`beep_enable` + Master beep enable + + - 0: no beeps + - 1: beeps + RW -in[0-*]_beep -curr[1-*]_beep -fan[1-*]_beep -temp[1-*]_beep +`in[0-*]_beep`, `curr[1-*]_beep`, `fan[1-*]_beep`, `temp[1-*]_beep`, Channel beep - 0: disable - 1: enable + + - 0: disable + - 1: enable + RW In theory, a chip could provide per-limit beep masking, but no such chip @@ -715,74 +958,90 @@ Old drivers provided a different, non-standard interface to alarms and beeps. These interface files are deprecated, but will be kept around for compatibility reasons: -alarms Alarm bitmask. +`alarms` + Alarm bitmask. + RO + Integer representation of one to four bytes. + A '1' bit means an alarm. + Chips should be programmed for 'comparator' mode so that the alarm will 'come back' after you read the register if it is still valid. + Generally a direct representation of a chip's internal alarm registers; there is no standard for the position of individual bits. For this reason, the use of this interface file for new drivers is discouraged. Use - individual *_alarm and *_fault files instead. + `individual *_alarm` and `*_fault` files instead. Bits are defined in kernel/include/sensors.h. -beep_mask Bitmask for beep. +`beep_mask` + Bitmask for beep. Same format as 'alarms' with the same bit locations, use discouraged for the same reason. Use individual - *_beep files instead. + `*_beep` files instead. RW -*********************** -* Intrusion detection * -*********************** +******************* +Intrusion detection +******************* -intrusion[0-*]_alarm +`intrusion[0-*]_alarm` Chassis intrusion detection - 0: OK - 1: intrusion detected + + - 0: OK + - 1: intrusion detected + RW + Contrary to regular alarm flags which clear themselves automatically when read, this one sticks until cleared by the user. This is done by writing 0 to the file. Writing other values is unsupported. -intrusion[0-*]_beep +`intrusion[0-*]_beep` Chassis intrusion beep + 0: disable 1: enable + RW -******************************** -* Average sample configuration * -******************************** +**************************** +Average sample configuration +**************************** Devices allowing for reading {in,power,curr,temp}_average values may export attributes for controlling number of samples used to compute average. -samples Sets number of average samples for all types of measurements. - RW - -in_samples -power_samples -curr_samples -temp_samples Sets number of average samples for specific type of measurements. - Note that on some devices it won't be possible to set all of them - to different values so changing one might also change some others. - RW - ++--------------+---------------------------------------------------------------+ +| samples | Sets number of average samples for all types of measurements. | +| | | +| | RW | ++--------------+---------------------------------------------------------------+ +| in_samples | Sets number of average samples for specific type of | +| power_samples| measurements. | +| curr_samples | | +| temp_samples | Note that on some devices it won't be possible to set all of | +| | them to different values so changing one might also change | +| | some others. | +| | | +| | RW | ++--------------+---------------------------------------------------------------+ sysfs attribute writes interpretation ------------------------------------- hwmon sysfs attributes always contain numbers, so the first thing to do is to convert the input to a number, there are 2 ways todo this depending whether -the number can be negative or not: -unsigned long u = simple_strtoul(buf, NULL, 10); -long s = simple_strtol(buf, NULL, 10); +the number can be negative or not:: + + unsigned long u = simple_strtoul(buf, NULL, 10); + long s = simple_strtol(buf, NULL, 10); With buf being the buffer with the user input being passed by the kernel. Notice that we do not use the second argument of strto[u]l, and thus cannot @@ -807,13 +1066,13 @@ limits using clamp_val(value, min_limit, max_limit). If it is not continuous like for example a tempX_type, then when an invalid value is written, -EINVAL should be returned. -Example1, temp1_max, register is a signed 8 bit value (-128 - 127 degrees): +Example1, temp1_max, register is a signed 8 bit value (-128 - 127 degrees):: long v = simple_strtol(buf, NULL, 10) / 1000; v = clamp_val(v, -128, 127); /* write v to register */ -Example2, fan divider setting, valid values 2, 4 and 8: +Example2, fan divider setting, valid values 2, 4 and 8:: unsigned long v = simple_strtoul(buf, NULL, 10); diff --git a/Documentation/hwmon/tc654 b/Documentation/hwmon/tc654 index 47636a8077b4..ce546ee6dfed 100644 --- a/Documentation/hwmon/tc654 +++ b/Documentation/hwmon/tc654 @@ -2,13 +2,16 @@ Kernel driver tc654 =================== Supported chips: + * Microchip TC654 and TC655 + Prefix: 'tc654' - Datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/20001734C.pdf + Datasheet: http://ww1.m + icrochip.com/downloads/en/DeviceDoc/20001734C.pdf Authors: - Chris Packham - Masahiko Iwamoto + - Chris Packham + - Masahiko Iwamoto Description ----------- diff --git a/Documentation/hwmon/tc74 b/Documentation/hwmon/tc74 index 43027aad5f8e..f1764211c129 100644 --- a/Documentation/hwmon/tc74 +++ b/Documentation/hwmon/tc74 @@ -2,8 +2,11 @@ Kernel driver tc74 ==================== Supported chips: + * Microchip TC74 + Prefix: 'tc74' + Datasheet: Publicly available at Microchip website. Description diff --git a/Documentation/hwmon/thmc50 b/Documentation/hwmon/thmc50 index 8a7772ade8d0..6dba1b59b20c 100644 --- a/Documentation/hwmon/thmc50 +++ b/Documentation/hwmon/thmc50 @@ -2,30 +2,41 @@ Kernel driver thmc50 ===================== Supported chips: + * Analog Devices ADM1022 + Prefix: 'adm1022' + Addresses scanned: I2C 0x2c - 0x2e + Datasheet: http://www.analog.com/en/prod/0,2877,ADM1022,00.html + * Texas Instruments THMC50 + Prefix: 'thmc50' + Addresses scanned: I2C 0x2c - 0x2e - Datasheet: http://www.ti.com/ + + Datasheet: http://www.ti.com/ + Author: Krzysztof Helt This driver was derived from the 2.4 kernel thmc50.c source file. Credits: + thmc50.c (2.4 kernel): - Frodo Looijaard - Philip Edelbrock + + - Frodo Looijaard + - Philip Edelbrock Module Parameters ----------------- * adm1022_temp3: short array - List of adapter,address pairs to force chips into ADM1022 mode with - second remote temperature. This does not work for original THMC50 chips. + List of adapter,address pairs to force chips into ADM1022 mode with + second remote temperature. This does not work for original THMC50 chips. Description ----------- @@ -59,12 +70,17 @@ Driver Features The driver provides up to three temperatures: -temp1 -- internal -temp2 -- remote -temp3 -- 2nd remote only for ADM1022 +temp1 + - internal +temp2 + - remote +temp3 + - 2nd remote only for ADM1022 -pwm1 -- fan speed (0 = stop, 255 = full) -pwm1_mode -- always 0 (DC mode) +pwm1 + - fan speed (0 = stop, 255 = full) +pwm1_mode + - always 0 (DC mode) The value of 0 for pwm1 also forces FAN_OFF signal from the chip, so it stops fans even if the value 0 into the ANALOG_OUT register does not. diff --git a/Documentation/hwmon/tmp102 b/Documentation/hwmon/tmp102 index 8454a7763122..5e34821df4ab 100644 --- a/Documentation/hwmon/tmp102 +++ b/Documentation/hwmon/tmp102 @@ -2,12 +2,17 @@ Kernel driver tmp102 ==================== Supported chips: + * Texas Instruments TMP102 + Prefix: 'tmp102' + Addresses scanned: none + Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp102.html Author: + Steven King Description diff --git a/Documentation/hwmon/tmp103 b/Documentation/hwmon/tmp103 index ec00a15645ba..7682a795e38c 100644 --- a/Documentation/hwmon/tmp103 +++ b/Documentation/hwmon/tmp103 @@ -2,12 +2,17 @@ Kernel driver tmp103 ==================== Supported chips: + * Texas Instruments TMP103 + Prefix: 'tmp103' + Addresses scanned: none + Product info and datasheet: http://www.ti.com/product/tmp103 Author: + Heiko Schocher Description diff --git a/Documentation/hwmon/tmp108 b/Documentation/hwmon/tmp108 index 25802df23010..7e08b7ef1e2f 100644 --- a/Documentation/hwmon/tmp108 +++ b/Documentation/hwmon/tmp108 @@ -2,12 +2,17 @@ Kernel driver tmp108 ==================== Supported chips: + * Texas Instruments TMP108 + Prefix: 'tmp108' + Addresses scanned: none + Datasheet: http://www.ti.com/product/tmp108 Author: + John Muir Description diff --git a/Documentation/hwmon/tmp421 b/Documentation/hwmon/tmp421 index 9e6fe5549ca1..1ba926a3605c 100644 --- a/Documentation/hwmon/tmp421 +++ b/Documentation/hwmon/tmp421 @@ -2,28 +2,49 @@ Kernel driver tmp421 ==================== Supported chips: + * Texas Instruments TMP421 + Prefix: 'tmp421' + Addresses scanned: I2C 0x2a, 0x4c, 0x4d, 0x4e and 0x4f + Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp421.html + * Texas Instruments TMP422 + Prefix: 'tmp422' + Addresses scanned: I2C 0x4c, 0x4d, 0x4e and 0x4f + Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp421.html + * Texas Instruments TMP423 + Prefix: 'tmp423' + Addresses scanned: I2C 0x4c and 0x4d + Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp421.html + * Texas Instruments TMP441 + Prefix: 'tmp441' + Addresses scanned: I2C 0x2a, 0x4c, 0x4d, 0x4e and 0x4f + Datasheet: http://www.ti.com/product/tmp441 + * Texas Instruments TMP442 + Prefix: 'tmp442' + Addresses scanned: I2C 0x4c and 0x4d + Datasheet: http://www.ti.com/product/tmp442 Authors: + Andre Prendel Description @@ -40,5 +61,6 @@ for both the local and remote channels is 0.0625 degree C. The chips support only temperature measurement. The driver exports the temperature values via the following sysfs files: -temp[1-4]_input -temp[2-4]_fault +**temp[1-4]_input** + +**temp[2-4]_fault** diff --git a/Documentation/hwmon/twl4030-madc-hwmon b/Documentation/hwmon/twl4030-madc-hwmon index c3a3a5be10ad..22c885383b11 100644 --- a/Documentation/hwmon/twl4030-madc-hwmon +++ b/Documentation/hwmon/twl4030-madc-hwmon @@ -1,8 +1,10 @@ Kernel driver twl4030-madc -========================= +========================== Supported chips: + * Texas Instruments TWL4030 + Prefix: 'twl4030-madc' @@ -19,8 +21,9 @@ channels which can be used in different modes. See this table for the meaning of the different channels +======= ========================================================== Channel Signal ------------------------------------------- +======= ========================================================== 0 Battery type(BTYPE) 1 BCI: Battery temperature (BTEMP) 2 GP analog input @@ -37,6 +40,7 @@ Channel Signal 13 Reserved 14 Reserved 15 VRUSB Supply/Speaker left/Speaker right polarization level +======= ========================================================== The Sysfs nodes will represent the voltage in the units of mV, diff --git a/Documentation/hwmon/userspace-tools b/Documentation/hwmon/userspace-tools index 9865aeedc58f..bf3797c8e734 100644 --- a/Documentation/hwmon/userspace-tools +++ b/Documentation/hwmon/userspace-tools @@ -1,3 +1,6 @@ +Userspace tools +=============== + Introduction ------------ diff --git a/Documentation/hwmon/via686a b/Documentation/hwmon/via686a index e5f90ab5c48d..a343c35df740 100644 --- a/Documentation/hwmon/via686a +++ b/Documentation/hwmon/via686a @@ -2,29 +2,35 @@ Kernel driver via686a ===================== Supported chips: + * Via VT82C686A, VT82C686B Southbridge Integrated Hardware Monitor + Prefix: 'via686a' + Addresses scanned: ISA in PCI-space encoded address + Datasheet: On request through web form (http://www.via.com.tw/en/resources/download-center/) Authors: - Kyösti Mälkki , - Mark D. Studebaker - Bob Dougherty - (Some conversion-factor data were contributed by - Jonathan Teh Soon Yew - and Alex van Kaam .) + - Kyösti Mälkki , + - Mark D. Studebaker + - Bob Dougherty + - (Some conversion-factor data were contributed by + - Jonathan Teh Soon Yew + - and Alex van Kaam .) Module Parameters ----------------- +======================= ======================================================= force_addr=0xaddr Set the I/O base address. Useful for boards that - don't set the address in the BIOS. Look for a BIOS - upgrade before resorting to this. Does not do a - PCI force; the via686a must still be present in lspci. - Don't use this unless the driver complains that the - base address is not set. - Example: 'modprobe via686a force_addr=0x6000' + don't set the address in the BIOS. Look for a BIOS + upgrade before resorting to this. Does not do a + PCI force; the via686a must still be present in lspci. + Don't use this unless the driver complains that the + base address is not set. + Example: 'modprobe via686a force_addr=0x6000' +======================= ======================================================= Description ----------- diff --git a/Documentation/hwmon/w83627ehf b/Documentation/hwmon/w83627ehf index 735c42a85ead..74d19ef11e1f 100644 --- a/Documentation/hwmon/w83627ehf +++ b/Documentation/hwmon/w83627ehf @@ -2,45 +2,79 @@ Kernel driver w83627ehf ======================= Supported chips: + * Winbond W83627EHF/EHG (ISA access ONLY) + Prefix: 'w83627ehf' + Addresses scanned: ISA address retrieved from Super I/O registers + Datasheet: not available + * Winbond W83627DHG + Prefix: 'w83627dhg' + Addresses scanned: ISA address retrieved from Super I/O registers + Datasheet: not available + * Winbond W83627DHG-P + Prefix: 'w83627dhg' + Addresses scanned: ISA address retrieved from Super I/O registers + Datasheet: not available + * Winbond W83627UHG + Prefix: 'w83627uhg' + Addresses scanned: ISA address retrieved from Super I/O registers + Datasheet: available from www.nuvoton.com + * Winbond W83667HG + Prefix: 'w83667hg' + Addresses scanned: ISA address retrieved from Super I/O registers + Datasheet: not available + * Winbond W83667HG-B + Prefix: 'w83667hg' + Addresses scanned: ISA address retrieved from Super I/O registers - Datasheet: Available from Nuvoton upon request - * Nuvoton NCT6775F/W83667HG-I - Prefix: 'nct6775' - Addresses scanned: ISA address retrieved from Super I/O registers - Datasheet: Available from Nuvoton upon request - * Nuvoton NCT6776F - Prefix: 'nct6776' - Addresses scanned: ISA address retrieved from Super I/O registers + Datasheet: Available from Nuvoton upon request + * Nuvoton NCT6775F/W83667HG-I + + Prefix: 'nct6775' + + Addresses scanned: ISA address retrieved from Super I/O registers + + Datasheet: Available from Nuvoton upon request + + * Nuvoton NCT6776F + + Prefix: 'nct6776' + + Addresses scanned: ISA address retrieved from Super I/O registers + + Datasheet: Available from Nuvoton upon request + + Authors: - Jean Delvare - Yuan Mu (Winbond) - Rudolf Marek - David Hubbard - Gong Jun + + - Jean Delvare + - Yuan Mu (Winbond) + - Rudolf Marek + - David Hubbard + - Gong Jun Description ----------- @@ -85,25 +119,30 @@ predefined temperature range. If the temperature goes out of range, fan is driven slower/faster to reach the predefined range again. The mode works for fan1-fan4. Mapping of temperatures to pwm outputs is as -follows: +follows:: -temp1 -> pwm1 -temp2 -> pwm2 -temp3 -> pwm3 (not on 627UHG) -prog -> pwm4 (not on 667HG and 667HG-B; the programmable setting is not - supported by the driver) + temp1 -> pwm1 + temp2 -> pwm2 + temp3 -> pwm3 (not on 627UHG) + prog -> pwm4 (not on 667HG and 667HG-B; the programmable setting is not + supported by the driver) /sys files ---------- -name - this is a standard hwmon device entry, it contains the name of - the device (see the prefix in the list of supported devices at - the top of this file) +name + this is a standard hwmon device entry, it contains the name of + the device (see the prefix in the list of supported devices at + the top of this file) + +pwm[1-4] + this file stores PWM duty cycle or DC value (fan speed) in range: -pwm[1-4] - this file stores PWM duty cycle or DC value (fan speed) in range: 0 (stop) to 255 (full) -pwm[1-4]_enable - this file controls mode of fan/temperature control: +pwm[1-4]_enable + this file controls mode of fan/temperature control: + * 1 Manual mode, write to pwm file any value 0-255 (full speed) * 2 "Thermal Cruise" mode * 3 "Fan Speed Cruise" mode @@ -121,33 +160,43 @@ pwm[1-4]_enable - this file controls mode of fan/temperature control: returned when reading pwm attributes is unrelated to SmartFan IV operation. -pwm[1-4]_mode - controls if output is PWM or DC level - * 0 DC output (0 - 12v) - * 1 PWM output +pwm[1-4]_mode + controls if output is PWM or DC level + + * 0 DC output (0 - 12v) + * 1 PWM output Thermal Cruise mode ------------------- If the temperature is in the range defined by: -pwm[1-4]_target - set target temperature, unit millidegree Celsius - (range 0 - 127000) -pwm[1-4]_tolerance - tolerance, unit millidegree Celsius (range 0 - 15000) +pwm[1-4]_target + set target temperature, unit millidegree Celsius + (range 0 - 127000) +pwm[1-4]_tolerance + tolerance, unit millidegree Celsius (range 0 - 15000) there are no changes to fan speed. Once the temperature leaves the interval, fan speed increases (temp is higher) or decreases if lower than desired. There are defined steps and times, but not exported by the driver yet. -pwm[1-4]_min_output - minimum fan speed (range 1 - 255), when the temperature - is below defined range. -pwm[1-4]_stop_time - how many milliseconds [ms] must elapse to switch - corresponding fan off. (when the temperature was below - defined range). -pwm[1-4]_start_output-minimum fan speed (range 1 - 255) when spinning up -pwm[1-4]_step_output- rate of fan speed change (1 - 255) -pwm[1-4]_stop_output- minimum fan speed (range 1 - 255) when spinning down -pwm[1-4]_max_output - maximum fan speed (range 1 - 255), when the temperature - is above defined range. +pwm[1-4]_min_output + minimum fan speed (range 1 - 255), when the temperature + is below defined range. +pwm[1-4]_stop_time + how many milliseconds [ms] must elapse to switch + corresponding fan off. (when the temperature was below + defined range). +pwm[1-4]_start_output + minimum fan speed (range 1 - 255) when spinning up +pwm[1-4]_step_output + rate of fan speed change (1 - 255) +pwm[1-4]_stop_output + minimum fan speed (range 1 - 255) when spinning down +pwm[1-4]_max_output + maximum fan speed (range 1 - 255), when the temperature + is above defined range. Note: last six functions are influenced by other control bits, not yet exported by the driver, so a change might not have any effect. @@ -161,26 +210,35 @@ different power-on default values, but BIOS should already be loading appropriate defaults. Note that bank selection must be performed as is currently done in the driver for all register addresses. -0x49: only on DHG, selects temperature source for AUX fan, CPU fan0 -0x4a: not completely documented for the EHF and the DHG documentation assigns - different behavior to bits 7 and 6, including extending the temperature - input selection to SmartFan I, not just SmartFan III. Testing on the EHF - will reveal whether they are compatible or not. +========================= ===================================================== +Register(s) Meaning +========================= ===================================================== +0x49 only on DHG, selects temperature source for AUX fan, + CPU fan0 +0x4a not completely documented for the EHF and the DHG + documentation assigns different behavior to bits 7 + and 6, including extending the temperature input + selection to SmartFan I, not just SmartFan III. + Testing on the EHF will reveal whether they are + compatible or not. +0x58 Chip ID: 0xa1=EHF 0xc1=DHG +0x5e only on DHG, has bits to enable "current mode" + temperature detection and critical temperature + protection +0x45b only on EHF, bit 3, vin4 alarm (EHF supports 10 + inputs, only 9 on DHG) +0x552 only on EHF, vin4 +0x558 only on EHF, vin4 high limit +0x559 only on EHF, vin4 low limit +0x6b only on DHG, SYS fan critical temperature +0x6c only on DHG, CPU fan0 critical temperature +0x6d only on DHG, AUX fan critical temperature +0x6e only on DHG, CPU fan1 critical temperature +0x50-0x55 and 0x650-0x657 marked as: -0x58: Chip ID: 0xa1=EHF 0xc1=DHG -0x5e: only on DHG, has bits to enable "current mode" temperature detection and - critical temperature protection -0x45b: only on EHF, bit 3, vin4 alarm (EHF supports 10 inputs, only 9 on DHG) -0x552: only on EHF, vin4 -0x558: only on EHF, vin4 high limit -0x559: only on EHF, vin4 low limit -0x6b: only on DHG, SYS fan critical temperature -0x6c: only on DHG, CPU fan0 critical temperature -0x6d: only on DHG, AUX fan critical temperature -0x6e: only on DHG, CPU fan1 critical temperature - -0x50-0x55 and 0x650-0x657 are marked "Test Register" for the EHF, but "Reserved - Register" for the DHG + - "Test Register" for the EHF + - "Reserved Register" for the DHG +========================= ===================================================== The DHG also supports PECI, where the DHG queries Intel CPU temperatures, and the ICH8 southbridge gets that data via PECI from the DHG, so that the diff --git a/Documentation/hwmon/w83627hf b/Documentation/hwmon/w83627hf index 8432e1118173..d1406c28dee7 100644 --- a/Documentation/hwmon/w83627hf +++ b/Documentation/hwmon/w83627hf @@ -20,10 +20,10 @@ Supported chips: Datasheet: Provided by Winbond on request(http://www.winbond.com/hq/enu) Authors: - Frodo Looijaard , - Philip Edelbrock , - Mark Studebaker , - Bernhard C. Schrenk + Frodo Looijaard , + Philip Edelbrock , + Mark Studebaker , + Bernhard C. Schrenk Module Parameters ----------------- @@ -52,8 +52,8 @@ If you really want i2c accesses for these Super I/O chips, use the w83781d driver. However this is not the preferred method now that this ISA driver has been developed. -The w83627_HF_ uses pins 110-106 as VID0-VID4. The w83627_THF_ uses the -same pins as GPIO[0:4]. Technically, the w83627_THF_ does not support a +The `w83627_HF_` uses pins 110-106 as VID0-VID4. The `w83627_THF_` uses the +same pins as GPIO[0:4]. Technically, the `w83627_THF_` does not support a VID reading. However the two chips have the identical 128 pin package. So, it is possible or even likely for a w83627thf to have the VID signals routed to these pins despite their not being labeled for that purpose. Therefore, @@ -75,19 +75,23 @@ module parameter is gone for technical reasons. If you need this feature, you can obtain the same result by using the isaset tool (part of lm-sensors) before loading the driver: -# Enter the Super I/O config space -isaset -y -f 0x2e 0x87 -isaset -y -f 0x2e 0x87 +# Enter the Super I/O config space:: -# Select the hwmon logical device -isaset -y 0x2e 0x2f 0x07 0x0b + isaset -y -f 0x2e 0x87 + isaset -y -f 0x2e 0x87 -# Set the base I/O address (to 0x290 in this example) -isaset -y 0x2e 0x2f 0x60 0x02 -isaset -y 0x2e 0x2f 0x61 0x90 +# Select the hwmon logical device:: -# Exit the Super-I/O config space -isaset -y -f 0x2e 0xaa + isaset -y 0x2e 0x2f 0x07 0x0b + +# Set the base I/O address (to 0x290 in this example):: + + isaset -y 0x2e 0x2f 0x60 0x02 + isaset -y 0x2e 0x2f 0x61 0x90 + +# Exit the Super-I/O config space:: + + isaset -y -f 0x2e 0xaa The above sequence assumes a Super-I/O config space at 0x2e/0x2f, but 0x4e/0x4f is also possible. @@ -97,18 +101,23 @@ Voltage pin mapping Here is a summary of the voltage pin mapping for the W83627THF. This can be useful to convert data provided by board manufacturers into -working libsensors configuration statements. +working libsensors configuration statements: - W83627THF | - Pin | Name | Register | Sysfs attribute ------------------------------------------------------ - 100 | CPUVCORE | 20h | in0 - 99 | VIN0 | 21h | in1 - 98 | VIN1 | 22h | in2 - 97 | VIN2 | 24h | in4 - 114 | AVCC | 23h | in3 - 61 | 5VSB | 50h (bank 5) | in7 - 74 | VBAT | 51h (bank 5) | in8 + +- W83627THF + + + ======== =============== =============== =============== + Pin Name Register Sysfs attribute + ======== =============== =============== =============== + 100 CPUVCORE 20h in0 + 99 VIN0 21h in1 + 98 VIN1 22h in2 + 97 VIN2 24h in4 + 114 AVCC 23h in3 + 61 5VSB 50h (bank 5) in7 + 74 VBAT 51h (bank 5) in8 + ======== =============== =============== =============== For other supported devices, you'll have to take the hard path and look up the information in the datasheet yourself (and then add it diff --git a/Documentation/hwmon/w83773g b/Documentation/hwmon/w83773g index 4cc6c0b8257f..cabaed391414 100644 --- a/Documentation/hwmon/w83773g +++ b/Documentation/hwmon/w83773g @@ -1,13 +1,18 @@ Kernel driver w83773g -==================== +===================== Supported chips: + * Nuvoton W83773G + Prefix: 'w83773g' + Addresses scanned: I2C 0x4c and 0x4d + Datasheet: https://www.nuvoton.com/resource-files/W83773G_SG_DatasheetV1_2.pdf Authors: + Lei YU Description @@ -27,7 +32,4 @@ Resolution for both the local and remote channels is 0.125 degree C. The chip supports only temperature measurement. The driver exports the temperature values via the following sysfs files: -temp[1-3]_input -temp[2-3]_fault -temp[2-3]_offset -update_interval +**temp[1-3]_input, temp[2-3]_fault, temp[2-3]_offset, update_interval** diff --git a/Documentation/hwmon/w83781d b/Documentation/hwmon/w83781d index 129b0a3b555b..f36d33dfb704 100644 --- a/Documentation/hwmon/w83781d +++ b/Documentation/hwmon/w83781d @@ -2,44 +2,64 @@ Kernel driver w83781d ===================== Supported chips: + * Winbond W83781D + Prefix: 'w83781d' + Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports) + Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/w83781d.pdf + * Winbond W83782D + Prefix: 'w83782d' + Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports) + Datasheet: http://www.winbond.com + * Winbond W83783S + Prefix: 'w83783s' + Addresses scanned: I2C 0x2d + Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/w83783s.pdf + * Asus AS99127F + Prefix: 'as99127f' + Addresses scanned: I2C 0x28 - 0x2f + Datasheet: Unavailable from Asus + + Authors: - Frodo Looijaard , - Philip Edelbrock , - Mark Studebaker + + - Frodo Looijaard , + - Philip Edelbrock , + - Mark Studebaker Module parameters ----------------- * init int - (default 1) - Use 'init=0' to bypass initializing the chip. - Try this if your computer crashes when you load the module. + (default 1) + + Use 'init=0' to bypass initializing the chip. + Try this if your computer crashes when you load the module. * reset int - (default 0) - The driver used to reset the chip on load, but does no more. Use - 'reset=1' to restore the old behavior. Report if you need to do this. + (default 0) + The driver used to reset the chip on load, but does no more. Use + 'reset=1' to restore the old behavior. Report if you need to do this. force_subclients=bus,caddr,saddr,saddr This is used to force the i2c addresses for subclients of - a certain chip. Typical usage is `force_subclients=0,0x2d,0x4a,0x4b' + a certain chip. Typical usage is `force_subclients=0,0x2d,0x4a,0x4b` to force the subclients of chip 0x2d on bus 0 to i2c addresses 0x4a and 0x4b. This parameter is useful for certain Tyan boards. @@ -54,12 +74,19 @@ There is quite some difference between these chips, but they are similar enough that it was sensible to put them together in one driver. The Asus chips are similar to an I2C-only W83782D. -Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA -as99127f 7 3 0 3 0x31 0x12c3 yes no -as99127f rev.2 (type_name = as99127f) 0x31 0x5ca3 yes no -w83781d 7 3 0 3 0x10-1 0x5ca3 yes yes -w83782d 9 3 2-4 3 0x30 0x5ca3 yes yes -w83783s 5-6 3 2 1-2 0x40 0x5ca3 yes no ++----------+---------+--------+-------+-------+---------+--------+------+-----+ +| Chip | #vin | #fanin | #pwm | #temp | wchipid | vendid | i2c | ISA | ++----------+---------+--------+-------+-------+---------+--------+------+-----+ +| as99127f | 7 | 3 | 0 | 3 | 0x31 | 0x12c3 | yes | no | ++----------+---------+--------+-------+-------+---------+--------+------+-----+ +| as99127f rev.2 (type_name = as99127f) | 0x31 | 0x5ca3 | yes | no | ++----------+---------+--------+-------+-------+---------+--------+------+-----+ +| w83781d | 7 | 3 | 0 | 3 | 0x10-1 | 0x5ca3 | yes | yes | ++----------+---------+--------+-------+-------+---------+--------+------+-----+ +| w83782d | 9 | 3 | 2-4 | 3 | 0x30 | 0x5ca3 | yes | yes | ++----------+---------+--------+-------+-------+---------+--------+------+-----+ +| w83783s | 5-6 | 3 | 2 | 1-2 | 0x40 | 0x5ca3 | yes | no | ++----------+---------+--------+-------+-------+---------+--------+------+-----+ Detection of these chips can sometimes be foiled because they can be in an internal state that allows no clean access. If you know the address @@ -124,22 +151,24 @@ or only the beeping for some alarms. Individual alarm and beep bits: -0x000001: in0 -0x000002: in1 -0x000004: in2 -0x000008: in3 -0x000010: temp1 -0x000020: temp2 (+temp3 on W83781D) -0x000040: fan1 -0x000080: fan2 -0x000100: in4 -0x000200: in5 -0x000400: in6 -0x000800: fan3 -0x001000: chassis -0x002000: temp3 (W83782D only) -0x010000: in7 (W83782D only) -0x020000: in8 (W83782D only) +======== ========================== +0x000001 in0 +0x000002 in1 +0x000004 in2 +0x000008 in3 +0x000010 temp1 +0x000020 temp2 (+temp3 on W83781D) +0x000040 fan1 +0x000080 fan2 +0x000100 in4 +0x000200 in5 +0x000400 in6 +0x000800 fan3 +0x001000 chassis +0x002000 temp3 (W83782D only) +0x010000 in7 (W83782D only) +0x020000 in8 (W83782D only) +======== ========================== If an alarm triggers, it will remain triggered until the hardware register is read at least once. This means that the cause for the alarm may @@ -179,68 +208,74 @@ Please do not send mail to the author or the sensors group asking for a datasheet or ideas on how to convince Asus. We can't help. -NOTES: +NOTES ----- 783s has no in1 so that in[2-6] are compatible with the 781d/782d. 783s pin is programmable for -5V or temp1; defaults to -5V, - no control in driver so temp1 doesn't work. + no control in driver so temp1 doesn't work. 782d and 783s datasheets differ on which is pwm1 and which is pwm2. - We chose to follow 782d. + We chose to follow 782d. 782d and 783s pin is programmable for fan3 input or pwm2 output; - defaults to fan3 input. - If pwm2 is enabled (with echo 255 1 > pwm2), then - fan3 will report 0. + defaults to fan3 input. + If pwm2 is enabled (with echo 255 1 > pwm2), then + fan3 will report 0. 782d has pwm1-2 for ISA, pwm1-4 for i2c. (pwm3-4 share pins with - the ISA pins) + the ISA pins) -Data sheet updates: +Data sheet updates ------------------ - PWM clock registers: - - 000: master / 512 - 001: master / 1024 - 010: master / 2048 - 011: master / 4096 - 100: master / 8192 + * 000: master / 512 + * 001: master / 1024 + * 010: master / 2048 + * 011: master / 4096 + * 100: master / 8192 Answers from Winbond tech support --------------------------------- -> -> 1) In the W83781D data sheet section 7.2 last paragraph, it talks about -> reprogramming the R-T table if the Beta of the thermistor is not -> 3435K. The R-T table is described briefly in section 8.20. -> What formulas do I use to program a new R-T table for a given Beta? -> - We are sorry that the calculation for R-T table value is -confidential. If you have another Beta value of thermistor, we can help -to calculate the R-T table for you. But you should give us real R-T -Table which can be gotten by thermistor vendor. Therefore we will calculate -them and obtain 32-byte data, and you can fill the 32-byte data to the -register in Bank0.CR51 of W83781D. + +:: + + > + > 1) In the W83781D data sheet section 7.2 last paragraph, it talks about + > reprogramming the R-T table if the Beta of the thermistor is not + > 3435K. The R-T table is described briefly in section 8.20. + > What formulas do I use to program a new R-T table for a given Beta? + > + + We are sorry that the calculation for R-T table value is + confidential. If you have another Beta value of thermistor, we can help + to calculate the R-T table for you. But you should give us real R-T + Table which can be gotten by thermistor vendor. Therefore we will calculate + them and obtain 32-byte data, and you can fill the 32-byte data to the + register in Bank0.CR51 of W83781D. -> 2) In the W83782D data sheet, it mentions that pins 38, 39, and 40 are -> programmable to be either thermistor or Pentium II diode inputs. -> How do I program them for diode inputs? I can't find any register -> to program these to be diode inputs. - --> You may program Bank0 CR[5Dh] and CR[59h] registers. + > 2) In the W83782D data sheet, it mentions that pins 38, 39, and 40 are + > programmable to be either thermistor or Pentium II diode inputs. + > How do I program them for diode inputs? I can't find any register + > to program these to be diode inputs. - CR[5Dh] bit 1(VTIN1) bit 2(VTIN2) bit 3(VTIN3) + You may program Bank0 CR[5Dh] and CR[59h] registers. - thermistor 0 0 0 - diode 1 1 1 + =============================== =============== ============== ============ + CR[5Dh] bit 1(VTIN1) bit 2(VTIN2) bit 3(VTIN3) + + thermistor 0 0 0 + diode 1 1 1 -(error) CR[59h] bit 4(VTIN1) bit 2(VTIN2) bit 3(VTIN3) -(right) CR[59h] bit 4(VTIN1) bit 5(VTIN2) bit 6(VTIN3) + (error) CR[59h] bit 4(VTIN1) bit 2(VTIN2) bit 3(VTIN3) + (right) CR[59h] bit 4(VTIN1) bit 5(VTIN2) bit 6(VTIN3) - PII thermal diode 1 1 1 - 2N3904 diode 0 0 0 + PII thermal diode 1 1 1 + 2N3904 diode 0 0 0 + =============================== =============== ============== ============ Asus Clones @@ -251,18 +286,21 @@ Here are some very useful information that were given to us by Alex Van Kaam about how to detect these chips, and how to read their values. He also gives advice for another Asus chipset, the Mozart-2 (which we don't support yet). Thanks Alex! + I reworded some parts and added personal comments. -# Detection: +Detection +^^^^^^^^^ AS99127F rev.1, AS99127F rev.2 and ASB100: - I2C address range: 0x29 - 0x2F -- If register 0x58 holds 0x31 then we have an Asus (either ASB100 or - AS99127F) +- If register 0x58 holds 0x31 then we have an Asus (either ASB100 or AS99127F) - Which one depends on register 0x4F (manufacturer ID): - 0x06 or 0x94: ASB100 - 0x12 or 0xC3: AS99127F rev.1 - 0x5C or 0xA3: AS99127F rev.2 + + - 0x06 or 0x94: ASB100 + - 0x12 or 0xC3: AS99127F rev.1 + - 0x5C or 0xA3: AS99127F rev.2 + Note that 0x5CA3 is Winbond's ID (WEC), which let us think Asus get their AS99127F rev.2 direct from Winbond. The other codes mean ATT and DVC, respectively. ATT could stand for Asustek something (although it would be @@ -273,88 +311,103 @@ Mozart-2: - I2C address: 0x77 - If register 0x58 holds 0x56 or 0x10 then we have a Mozart-2 - Of the Mozart there are 3 types: - 0x58=0x56, 0x4E=0x94, 0x4F=0x36: Asus ASM58 Mozart-2 - 0x58=0x56, 0x4E=0x94, 0x4F=0x06: Asus AS2K129R Mozart-2 - 0x58=0x10, 0x4E=0x5C, 0x4F=0xA3: Asus ??? Mozart-2 + + - 0x58=0x56, 0x4E=0x94, 0x4F=0x36: Asus ASM58 Mozart-2 + - 0x58=0x56, 0x4E=0x94, 0x4F=0x06: Asus AS2K129R Mozart-2 + - 0x58=0x10, 0x4E=0x5C, 0x4F=0xA3: Asus ??? Mozart-2 + You can handle all 3 the exact same way :) -# Temperature sensors: +Temperature sensors +^^^^^^^^^^^^^^^^^^^ ASB100: -- sensor 1: register 0x27 -- sensor 2 & 3 are the 2 LM75's on the SMBus -- sensor 4: register 0x17 -Remark: I noticed that on Intel boards sensor 2 is used for the CPU + - sensor 1: register 0x27 + - sensor 2 & 3 are the 2 LM75's on the SMBus + - sensor 4: register 0x17 + +Remark: + + I noticed that on Intel boards sensor 2 is used for the CPU and 4 is ignored/stuck, on AMD boards sensor 4 is the CPU and sensor 2 is either ignored or a socket temperature. AS99127F (rev.1 and 2 alike): -- sensor 1: register 0x27 -- sensor 2 & 3 are the 2 LM75's on the SMBus -Remark: Register 0x5b is suspected to be temperature type selector. Bit 1 + - sensor 1: register 0x27 + - sensor 2 & 3 are the 2 LM75's on the SMBus + +Remark: + + Register 0x5b is suspected to be temperature type selector. Bit 1 would control temp1, bit 3 temp2 and bit 5 temp3. Mozart-2: -- sensor 1: register 0x27 -- sensor 2: register 0x13 + - sensor 1: register 0x27 + - sensor 2: register 0x13 -# Fan sensors: +Fan sensors +^^^^^^^^^^^ ASB100, AS99127F (rev.1 and 2 alike): -- 3 fans, identical to the W83781D + - 3 fans, identical to the W83781D Mozart-2: -- 2 fans only, 1350000/RPM/div -- fan 1: register 0x28, divisor on register 0xA1 (bits 4-5) -- fan 2: register 0x29, divisor on register 0xA1 (bits 6-7) + - 2 fans only, 1350000/RPM/div + - fan 1: register 0x28, divisor on register 0xA1 (bits 4-5) + - fan 2: register 0x29, divisor on register 0xA1 (bits 6-7) -# Voltages: +Voltages +^^^^^^^^ This is where there is a difference between AS99127F rev.1 and 2. -Remark: The difference is similar to the difference between + +Remark: + + The difference is similar to the difference between W83781D and W83782D. ASB100: -in0=r(0x20)*0.016 -in1=r(0x21)*0.016 -in2=r(0x22)*0.016 -in3=r(0x23)*0.016*1.68 -in4=r(0x24)*0.016*3.8 -in5=r(0x25)*(-0.016)*3.97 -in6=r(0x26)*(-0.016)*1.666 + - in0=r(0x20)*0.016 + - in1=r(0x21)*0.016 + - in2=r(0x22)*0.016 + - in3=r(0x23)*0.016*1.68 + - in4=r(0x24)*0.016*3.8 + - in5=r(0x25)*(-0.016)*3.97 + - in6=r(0x26)*(-0.016)*1.666 AS99127F rev.1: -in0=r(0x20)*0.016 -in1=r(0x21)*0.016 -in2=r(0x22)*0.016 -in3=r(0x23)*0.016*1.68 -in4=r(0x24)*0.016*3.8 -in5=r(0x25)*(-0.016)*3.97 -in6=r(0x26)*(-0.016)*1.503 + - in0=r(0x20)*0.016 + - in1=r(0x21)*0.016 + - in2=r(0x22)*0.016 + - in3=r(0x23)*0.016*1.68 + - in4=r(0x24)*0.016*3.8 + - in5=r(0x25)*(-0.016)*3.97 + - in6=r(0x26)*(-0.016)*1.503 AS99127F rev.2: -in0=r(0x20)*0.016 -in1=r(0x21)*0.016 -in2=r(0x22)*0.016 -in3=r(0x23)*0.016*1.68 -in4=r(0x24)*0.016*3.8 -in5=(r(0x25)*0.016-3.6)*5.14+3.6 -in6=(r(0x26)*0.016-3.6)*3.14+3.6 + - in0=r(0x20)*0.016 + - in1=r(0x21)*0.016 + - in2=r(0x22)*0.016 + - in3=r(0x23)*0.016*1.68 + - in4=r(0x24)*0.016*3.8 + - in5=(r(0x25)*0.016-3.6)*5.14+3.6 + - in6=(r(0x26)*0.016-3.6)*3.14+3.6 Mozart-2: -in0=r(0x20)*0.016 -in1=255 -in2=r(0x22)*0.016 -in3=r(0x23)*0.016*1.68 -in4=r(0x24)*0.016*4 -in5=255 -in6=255 + - in0=r(0x20)*0.016 + - in1=255 + - in2=r(0x22)*0.016 + - in3=r(0x23)*0.016*1.68 + - in4=r(0x24)*0.016*4 + - in5=255 + - in6=255 -# PWM +PWM +^^^ * Additional info about PWM on the AS99127F (may apply to other Asus -chips as well) by Jean Delvare as of 2004-04-09: + chips as well) by Jean Delvare as of 2004-04-09: AS99127F revision 2 seems to have two PWM registers at 0x59 and 0x5A, and a temperature sensor type selector at 0x5B (which basically means @@ -401,15 +454,20 @@ AS99127F chips at all. I've been fiddling around with the (in)famous 0x59 register and found out the following values do work as a form of coarse pwm: -0x80 - seems to turn fans off after some time(1-2 minutes)... might be -some form of auto-fan-control based on temp? hmm (Qfan? this mobo is an -old ASUS, it isn't marketed as Qfan. Maybe some beta pre-attempt at Qfan -that was dropped at the BIOS) -0x81 - off -0x82 - slightly "on-ner" than off, but my fans do not get to move. I can -hear the high-pitched PWM sound that motors give off at too-low-pwm. -0x83 - now they do move. Estimate about 70% speed or so. -0x84-0x8f - full on +0x80 + - seems to turn fans off after some time(1-2 minutes)... might be + some form of auto-fan-control based on temp? hmm (Qfan? this mobo is an + old ASUS, it isn't marketed as Qfan. Maybe some beta pre-attempt at Qfan + that was dropped at the BIOS) +0x81 + - off +0x82 + - slightly "on-ner" than off, but my fans do not get to move. I can + hear the high-pitched PWM sound that motors give off at too-low-pwm. +0x83 + - now they do move. Estimate about 70% speed or so. +0x84-0x8f + - full on Changing the high nibble doesn't seem to do much except the high bit (0x80) must be set for PWM to work, else the current pwm doesn't seem to @@ -435,6 +493,7 @@ looks like PWM is filtered on this motherboard. Here are some of measurements: +==== ========= 0x80 20 mV 0x81 20 mV 0x82 232 mV @@ -451,3 +510,4 @@ Here are some of measurements: 0x8d 12.4 V 0x8e 12.4 V 0x8f 12.4 V +==== ========= diff --git a/Documentation/hwmon/w83792d b/Documentation/hwmon/w83792d index f2ffc402ea45..92c4bfe4968c 100644 --- a/Documentation/hwmon/w83792d +++ b/Documentation/hwmon/w83792d @@ -2,9 +2,13 @@ Kernel driver w83792d ===================== Supported chips: + * Winbond W83792D + Prefix: 'w83792d' + Addresses scanned: I2C 0x2c - 0x2f + Datasheet: http://www.winbond.com.tw Author: Shane Huang (Winbond) @@ -15,15 +19,16 @@ Module Parameters ----------------- * init int - (default 1) - Use 'init=0' to bypass initializing the chip. - Try this if your computer crashes when you load the module. + (default 1) + + Use 'init=0' to bypass initializing the chip. + Try this if your computer crashes when you load the module. * force_subclients=bus,caddr,saddr,saddr - This is used to force the i2c addresses for subclients of - a certain chip. Example usage is `force_subclients=0,0x2f,0x4a,0x4b' - to force the subclients of chip 0x2f on bus 0 to i2c addresses - 0x4a and 0x4b. + This is used to force the i2c addresses for subclients of + a certain chip. Example usage is `force_subclients=0,0x2f,0x4a,0x4b` + to force the subclients of chip 0x2f on bus 0 to i2c addresses + 0x4a and 0x4b. Description @@ -67,31 +72,34 @@ or maximum limit. Alarms are provided as output from "realtime status register". Following bits are defined: -bit - alarm on: -0 - in0 -1 - in1 -2 - temp1 -3 - temp2 -4 - temp3 -5 - fan1 -6 - fan2 -7 - fan3 -8 - in2 -9 - in3 -10 - in4 -11 - in5 -12 - in6 -13 - VID change -14 - chassis -15 - fan7 -16 - tart1 -17 - tart2 -18 - tart3 -19 - in7 -20 - in8 -21 - fan4 -22 - fan5 -23 - fan6 +==== ========== +bit alarm on +==== ========== +0 in0 +1 in1 +2 temp1 +3 temp2 +4 temp3 +5 fan1 +6 fan2 +7 fan3 +8 in2 +9 in3 +10 in4 +11 in5 +12 in6 +13 VID change +14 chassis +15 fan7 +16 tart1 +17 tart2 +18 tart3 +19 in7 +20 in8 +21 fan4 +22 fan5 +23 fan6 +==== ========== Tart will be asserted while target temperature cannot be achieved after 3 minutes of full speed rotation of corresponding fan. @@ -114,7 +122,7 @@ Known problems: by CR[0x49h]. - The function of vid and vrm has not been finished, because I'm NOT very familiar with them. Adding support is welcome. -  - The function of chassis open detection needs more tests. + - The function of chassis open detection needs more tests. - If you have ASUS server board and chip was not found: Then you will need to upgrade to latest (or beta) BIOS. If it does not help please contact us. @@ -165,17 +173,27 @@ for each fan. /sys files ---------- -pwm[1-7] - this file stores PWM duty cycle or DC value (fan speed) in range: - 0 (stop) to 255 (full) -pwm[1-3]_enable - this file controls mode of fan/temperature control: - * 0 Disabled - * 1 Manual mode - * 2 Smart Fan II - * 3 Thermal Cruise -pwm[1-7]_mode - Select PWM or DC mode - * 0 DC - * 1 PWM -thermal_cruise[1-3] - Selects the desired temperature for cruise (degC) -tolerance[1-3] - Value in degrees of Celsius (degC) for +- T -sf2_point[1-4]_fan[1-3] - four temperature points for each fan for Smart Fan II -sf2_level[1-3]_fan[1-3] - three PWM/DC levels for each fan for Smart Fan II +pwm[1-7] + - this file stores PWM duty cycle or DC value (fan speed) in range: + + 0 (stop) to 255 (full) +pwm[1-3]_enable + - this file controls mode of fan/temperature control: + + * 0 Disabled + * 1 Manual mode + * 2 Smart Fan II + * 3 Thermal Cruise +pwm[1-7]_mode + - Select PWM or DC mode + + * 0 DC + * 1 PWM +thermal_cruise[1-3] + - Selects the desired temperature for cruise (degC) +tolerance[1-3] + - Value in degrees of Celsius (degC) for +- T +sf2_point[1-4]_fan[1-3] + - four temperature points for each fan for Smart Fan II +sf2_level[1-3]_fan[1-3] + - three PWM/DC levels for each fan for Smart Fan II diff --git a/Documentation/hwmon/w83795 b/Documentation/hwmon/w83795 index d3e678216b9a..d0615e2fabb9 100644 --- a/Documentation/hwmon/w83795 +++ b/Documentation/hwmon/w83795 @@ -2,18 +2,26 @@ Kernel driver w83795 ==================== Supported chips: + * Winbond/Nuvoton W83795G + Prefix: 'w83795g' + Addresses scanned: I2C 0x2c - 0x2f + Datasheet: Available for download on nuvoton.com + * Winbond/Nuvoton W83795ADG + Prefix: 'w83795adg' + Addresses scanned: I2C 0x2c - 0x2f + Datasheet: Available for download on nuvoton.com Authors: - Wei Song (Nuvoton) - Jean Delvare + - Wei Song (Nuvoton) + - Jean Delvare Pin mapping @@ -23,105 +31,112 @@ Here is a summary of the pin mapping for the W83795G and W83795ADG. This can be useful to convert data provided by board manufacturers into working libsensors configuration statements. - W83795G | - Pin | Name | Register | Sysfs attribute ------------------------------------------------------------------- - 13 | VSEN1 (VCORE1) | 10h | in0 - 14 | VSEN2 (VCORE2) | 11h | in1 - 15 | VSEN3 (VCORE3) | 12h | in2 - 16 | VSEN4 | 13h | in3 - 17 | VSEN5 | 14h | in4 - 18 | VSEN6 | 15h | in5 - 19 | VSEN7 | 16h | in6 - 20 | VSEN8 | 17h | in7 - 21 | VSEN9 | 18h | in8 - 22 | VSEN10 | 19h | in9 - 23 | VSEN11 | 1Ah | in10 - 28 | VTT | 1Bh | in11 - 24 | 3VDD | 1Ch | in12 - 25 | 3VSB | 1Dh | in13 - 26 | VBAT | 1Eh | in14 - 3 | VSEN12/TR5 | 1Fh | in15/temp5 - 4 | VSEN13/TR5 | 20h | in16/temp6 - 5/ 6 | VDSEN14/TR1/TD1 | 21h | in17/temp1 - 7/ 8 | VDSEN15/TR2/TD2 | 22h | in18/temp2 - 9/ 10 | VDSEN16/TR3/TD3 | 23h | in19/temp3 - 11/ 12 | VDSEN17/TR4/TD4 | 24h | in20/temp4 - 40 | FANIN1 | 2Eh | fan1 - 42 | FANIN2 | 2Fh | fan2 - 44 | FANIN3 | 30h | fan3 - 46 | FANIN4 | 31h | fan4 - 48 | FANIN5 | 32h | fan5 - 50 | FANIN6 | 33h | fan6 - 52 | FANIN7 | 34h | fan7 - 54 | FANIN8 | 35h | fan8 - 57 | FANIN9 | 36h | fan9 - 58 | FANIN10 | 37h | fan10 - 59 | FANIN11 | 38h | fan11 - 60 | FANIN12 | 39h | fan12 - 31 | FANIN13 | 3Ah | fan13 - 35 | FANIN14 | 3Bh | fan14 - 41 | FANCTL1 | 10h (bank 2) | pwm1 - 43 | FANCTL2 | 11h (bank 2) | pwm2 - 45 | FANCTL3 | 12h (bank 2) | pwm3 - 47 | FANCTL4 | 13h (bank 2) | pwm4 - 49 | FANCTL5 | 14h (bank 2) | pwm5 - 51 | FANCTL6 | 15h (bank 2) | pwm6 - 53 | FANCTL7 | 16h (bank 2) | pwm7 - 55 | FANCTL8 | 17h (bank 2) | pwm8 - 29/ 30 | PECI/TSI (DTS1) | 26h | temp7 - 29/ 30 | PECI/TSI (DTS2) | 27h | temp8 - 29/ 30 | PECI/TSI (DTS3) | 28h | temp9 - 29/ 30 | PECI/TSI (DTS4) | 29h | temp10 - 29/ 30 | PECI/TSI (DTS5) | 2Ah | temp11 - 29/ 30 | PECI/TSI (DTS6) | 2Bh | temp12 - 29/ 30 | PECI/TSI (DTS7) | 2Ch | temp13 - 29/ 30 | PECI/TSI (DTS8) | 2Dh | temp14 - 27 | CASEOPEN# | 46h | intrusion0 - W83795ADG | - Pin | Name | Register | Sysfs attribute ------------------------------------------------------------------- - 10 | VSEN1 (VCORE1) | 10h | in0 - 11 | VSEN2 (VCORE2) | 11h | in1 - 12 | VSEN3 (VCORE3) | 12h | in2 - 13 | VSEN4 | 13h | in3 - 14 | VSEN5 | 14h | in4 - 15 | VSEN6 | 15h | in5 - 16 | VSEN7 | 16h | in6 - 17 | VSEN8 | 17h | in7 - 22 | VTT | 1Bh | in11 - 18 | 3VDD | 1Ch | in12 - 19 | 3VSB | 1Dh | in13 - 20 | VBAT | 1Eh | in14 - 48 | VSEN12/TR5 | 1Fh | in15/temp5 - 1 | VSEN13/TR5 | 20h | in16/temp6 - 2/ 3 | VDSEN14/TR1/TD1 | 21h | in17/temp1 - 4/ 5 | VDSEN15/TR2/TD2 | 22h | in18/temp2 - 6/ 7 | VDSEN16/TR3/TD3 | 23h | in19/temp3 - 8/ 9 | VDSEN17/TR4/TD4 | 24h | in20/temp4 - 32 | FANIN1 | 2Eh | fan1 - 34 | FANIN2 | 2Fh | fan2 - 36 | FANIN3 | 30h | fan3 - 37 | FANIN4 | 31h | fan4 - 38 | FANIN5 | 32h | fan5 - 39 | FANIN6 | 33h | fan6 - 40 | FANIN7 | 34h | fan7 - 41 | FANIN8 | 35h | fan8 - 43 | FANIN9 | 36h | fan9 - 44 | FANIN10 | 37h | fan10 - 45 | FANIN11 | 38h | fan11 - 46 | FANIN12 | 39h | fan12 - 24 | FANIN13 | 3Ah | fan13 - 28 | FANIN14 | 3Bh | fan14 - 33 | FANCTL1 | 10h (bank 2) | pwm1 - 35 | FANCTL2 | 11h (bank 2) | pwm2 - 23 | PECI (DTS1) | 26h | temp7 - 23 | PECI (DTS2) | 27h | temp8 - 23 | PECI (DTS3) | 28h | temp9 - 23 | PECI (DTS4) | 29h | temp10 - 23 | PECI (DTS5) | 2Ah | temp11 - 23 | PECI (DTS6) | 2Bh | temp12 - 23 | PECI (DTS7) | 2Ch | temp13 - 23 | PECI (DTS8) | 2Dh | temp14 - 21 | CASEOPEN# | 46h | intrusion0 +- W83795G + +========= ======================= =============== ================ +Pin Name Register Sysfs attribute +========= ======================= =============== ================ + 13 VSEN1 (VCORE1) 10h in0 + 14 VSEN2 (VCORE2) 11h in1 + 15 VSEN3 (VCORE3) 12h in2 + 16 VSEN4 13h in3 + 17 VSEN5 14h in4 + 18 VSEN6 15h in5 + 19 VSEN7 16h in6 + 20 VSEN8 17h in7 + 21 VSEN9 18h in8 + 22 VSEN10 19h in9 + 23 VSEN11 1Ah in10 + 28 VTT 1Bh in11 + 24 3VDD 1Ch in12 + 25 3VSB 1Dh in13 + 26 VBAT 1Eh in14 + 3 VSEN12/TR5 1Fh in15/temp5 + 4 VSEN13/TR5 20h in16/temp6 + 5/ 6 VDSEN14/TR1/TD1 21h in17/temp1 + 7/ 8 VDSEN15/TR2/TD2 22h in18/temp2 + 9/ 10 VDSEN16/TR3/TD3 23h in19/temp3 + 11/ 12 VDSEN17/TR4/TD4 24h in20/temp4 + 40 FANIN1 2Eh fan1 + 42 FANIN2 2Fh fan2 + 44 FANIN3 30h fan3 + 46 FANIN4 31h fan4 + 48 FANIN5 32h fan5 + 50 FANIN6 33h fan6 + 52 FANIN7 34h fan7 + 54 FANIN8 35h fan8 + 57 FANIN9 36h fan9 + 58 FANIN10 37h fan10 + 59 FANIN11 38h fan11 + 60 FANIN12 39h fan12 + 31 FANIN13 3Ah fan13 + 35 FANIN14 3Bh fan14 + 41 FANCTL1 10h (bank 2) pwm1 + 43 FANCTL2 11h (bank 2) pwm2 + 45 FANCTL3 12h (bank 2) pwm3 + 47 FANCTL4 13h (bank 2) pwm4 + 49 FANCTL5 14h (bank 2) pwm5 + 51 FANCTL6 15h (bank 2) pwm6 + 53 FANCTL7 16h (bank 2) pwm7 + 55 FANCTL8 17h (bank 2) pwm8 + 29/ 30 PECI/TSI (DTS1) 26h temp7 + 29/ 30 PECI/TSI (DTS2) 27h temp8 + 29/ 30 PECI/TSI (DTS3) 28h temp9 + 29/ 30 PECI/TSI (DTS4) 29h temp10 + 29/ 30 PECI/TSI (DTS5) 2Ah temp11 + 29/ 30 PECI/TSI (DTS6) 2Bh temp12 + 29/ 30 PECI/TSI (DTS7) 2Ch temp13 + 29/ 30 PECI/TSI (DTS8) 2Dh temp14 + 27 CASEOPEN# 46h intrusion0 +========= ======================= =============== ================ + +- W83795ADG + +========= ======================= =============== ================ +Pin Name Register Sysfs attribute +========= ======================= =============== ================ + 10 VSEN1 (VCORE1) 10h in0 + 11 VSEN2 (VCORE2) 11h in1 + 12 VSEN3 (VCORE3) 12h in2 + 13 VSEN4 13h in3 + 14 VSEN5 14h in4 + 15 VSEN6 15h in5 + 16 VSEN7 16h in6 + 17 VSEN8 17h in7 + 22 VTT 1Bh in11 + 18 3VDD 1Ch in12 + 19 3VSB 1Dh in13 + 20 VBAT 1Eh in14 + 48 VSEN12/TR5 1Fh in15/temp5 + 1 VSEN13/TR5 20h in16/temp6 + 2/ 3 VDSEN14/TR1/TD1 21h in17/temp1 + 4/ 5 VDSEN15/TR2/TD2 22h in18/temp2 + 6/ 7 VDSEN16/TR3/TD3 23h in19/temp3 + 8/ 9 VDSEN17/TR4/TD4 24h in20/temp4 + 32 FANIN1 2Eh fan1 + 34 FANIN2 2Fh fan2 + 36 FANIN3 30h fan3 + 37 FANIN4 31h fan4 + 38 FANIN5 32h fan5 + 39 FANIN6 33h fan6 + 40 FANIN7 34h fan7 + 41 FANIN8 35h fan8 + 43 FANIN9 36h fan9 + 44 FANIN10 37h fan10 + 45 FANIN11 38h fan11 + 46 FANIN12 39h fan12 + 24 FANIN13 3Ah fan13 + 28 FANIN14 3Bh fan14 + 33 FANCTL1 10h (bank 2) pwm1 + 35 FANCTL2 11h (bank 2) pwm2 + 23 PECI (DTS1) 26h temp7 + 23 PECI (DTS2) 27h temp8 + 23 PECI (DTS3) 28h temp9 + 23 PECI (DTS4) 29h temp10 + 23 PECI (DTS5) 2Ah temp11 + 23 PECI (DTS6) 2Bh temp12 + 23 PECI (DTS7) 2Ch temp13 + 23 PECI (DTS8) 2Dh temp14 + 21 CASEOPEN# 46h intrusion0 +========= ======================= =============== ================ diff --git a/Documentation/hwmon/w83l785ts b/Documentation/hwmon/w83l785ts index c8978478871f..7fa5418fed11 100644 --- a/Documentation/hwmon/w83l785ts +++ b/Documentation/hwmon/w83l785ts @@ -2,14 +2,19 @@ Kernel driver w83l785ts ======================= Supported chips: + * Winbond W83L785TS-S + Prefix: 'w83l785ts' + Addresses scanned: I2C 0x2e + Datasheet: Publicly available at the Winbond USA website - http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83L785TS-S.pdf + + http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83L785TS-S.pdf Authors: - Jean Delvare + Jean Delvare Description ----------- diff --git a/Documentation/hwmon/w83l786ng b/Documentation/hwmon/w83l786ng index d8f55d7fff10..2b7776190de3 100644 --- a/Documentation/hwmon/w83l786ng +++ b/Documentation/hwmon/w83l786ng @@ -1,10 +1,14 @@ Kernel driver w83l786ng -===================== +======================= Supported chips: + * Winbond W83L786NG/W83L786NR + Prefix: 'w83l786ng' + Addresses scanned: I2C 0x2e - 0x2f + Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83L786NRNG09.pdf Author: Kevin Lo @@ -14,9 +18,10 @@ Module Parameters ----------------- * reset boolean - (default 0) - Use 'reset=1' to reset the chip (via index 0x40, bit 7). The default - behavior is no chip reset to preserve BIOS settings + (default 0) + + Use 'reset=1' to reset the chip (via index 0x40, bit 7). The default + behavior is no chip reset to preserve BIOS settings Description @@ -41,14 +46,21 @@ or maximum limit. /sys files ---------- -pwm[1-2] - this file stores PWM duty cycle or DC value (fan speed) in range: - 0 (stop) to 255 (full) -pwm[1-2]_enable - this file controls mode of fan/temperature control: - * 0 Manual Mode - * 1 Thermal Cruise - * 2 Smart Fan II - * 4 FAN_SET -pwm[1-2]_mode - Select PWM of DC mode - * 0 DC - * 1 PWM -tolerance[1-2] - Value in degrees of Celsius (degC) for +- T +pwm[1-2] + - this file stores PWM duty cycle or DC value (fan speed) in range: + + 0 (stop) to 255 (full) +pwm[1-2]_enable + - this file controls mode of fan/temperature control: + + * 0 Manual Mode + * 1 Thermal Cruise + * 2 Smart Fan II + * 4 FAN_SET +pwm[1-2]_mode + - Select PWM of DC mode + + * 0 DC + * 1 PWM +tolerance[1-2] + - Value in degrees of Celsius (degC) for +- T diff --git a/Documentation/hwmon/xgene-hwmon b/Documentation/hwmon/xgene-hwmon index 6ec50ed7cc8f..439b30b881b6 100644 --- a/Documentation/hwmon/xgene-hwmon +++ b/Documentation/hwmon/xgene-hwmon @@ -1,7 +1,8 @@ Kernel driver xgene-hwmon -======================== +========================= Supported chips: + * APM X-Gene SoC Description @@ -15,16 +16,21 @@ For ACPI, it is the PCC mailbox. The following sensors are supported * Temperature - - SoC on-die temperature in milli-degree C - - Alarm when high/over temperature occurs + - SoC on-die temperature in milli-degree C + - Alarm when high/over temperature occurs + * Power - - CPU power in uW - - IO power in uW + - CPU power in uW + - IO power in uW sysfs-Interface --------------- -temp0_input - SoC on-die temperature (milli-degree C) -temp0_critical_alarm - An 1 would indicates on-die temperature exceeded threshold -power0_input - CPU power in (uW) -power1_input - IO power in (uW) +temp0_input + - SoC on-die temperature (milli-degree C) +temp0_critical_alarm + - An 1 would indicates on-die temperature exceeded threshold +power0_input + - CPU power in (uW) +power1_input + - IO power in (uW) From 7ebd8b66dd9e5a0b65e5ee5e2b8e7ca382ec97b7 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 17 Apr 2019 06:46:29 -0300 Subject: [PATCH 116/125] docs: hwmon: Add an index file and rename docs to *.rst Now that all files were converted to ReST format, rename them and add an index. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Guenter Roeck --- .../devicetree/bindings/hwmon/g762.txt | 2 +- Documentation/hwmon/{ab8500 => ab8500.rst} | 2 +- ...guru-datasheet => abituguru-datasheet.rst} | 0 .../hwmon/{abituguru => abituguru.rst} | 0 .../hwmon/{abituguru3 => abituguru3.rst} | 0 Documentation/hwmon/{abx500 => abx500.rst} | 0 ...{acpi_power_meter => acpi_power_meter.rst} | 2 +- Documentation/hwmon/{ad7314 => ad7314.rst} | 0 .../hwmon/{adc128d818 => adc128d818.rst} | 0 Documentation/hwmon/{adm1021 => adm1021.rst} | 0 Documentation/hwmon/{adm1025 => adm1025.rst} | 0 Documentation/hwmon/{adm1026 => adm1026.rst} | 0 Documentation/hwmon/{adm1031 => adm1031.rst} | 0 Documentation/hwmon/{adm1275 => adm1275.rst} | 4 +- Documentation/hwmon/{adm9240 => adm9240.rst} | 0 Documentation/hwmon/{ads1015 => ads1015.rst} | 0 Documentation/hwmon/{ads7828 => ads7828.rst} | 0 Documentation/hwmon/{adt7410 => adt7410.rst} | 0 Documentation/hwmon/{adt7411 => adt7411.rst} | 0 Documentation/hwmon/{adt7462 => adt7462.rst} | 1 - Documentation/hwmon/{adt7470 => adt7470.rst} | 0 Documentation/hwmon/{adt7475 => adt7475.rst} | 0 Documentation/hwmon/{amc6821 => amc6821.rst} | 1 - Documentation/hwmon/{asb100 => asb100.rst} | 1 - Documentation/hwmon/{asc7621 => asc7621.rst} | 0 ...{aspeed-pwm-tacho => aspeed-pwm-tacho.rst} | 0 .../hwmon/{coretemp => coretemp.rst} | 0 Documentation/hwmon/{da9052 => da9052.rst} | 0 Documentation/hwmon/{da9055 => da9055.rst} | 0 Documentation/hwmon/{dme1737 => dme1737.rst} | 0 Documentation/hwmon/{ds1621 => ds1621.rst} | 0 Documentation/hwmon/{ds620 => ds620.rst} | 0 Documentation/hwmon/{emc1403 => emc1403.rst} | 0 Documentation/hwmon/{emc2103 => emc2103.rst} | 0 .../hwmon/{emc6w201 => emc6w201.rst} | 0 Documentation/hwmon/{f71805f => f71805f.rst} | 0 .../hwmon/{f71882fg => f71882fg.rst} | 0 .../hwmon/{fam15h_power => fam15h_power.rst} | 0 .../hwmon/{ftsteutates => ftsteutates.rst} | 0 Documentation/hwmon/{g760a => g760a.rst} | 0 Documentation/hwmon/{g762 => g762.rst} | 2 +- Documentation/hwmon/{gl518sm => gl518sm.rst} | 0 Documentation/hwmon/{hih6130 => hih6130.rst} | 0 ...on-kernel-api.txt => hwmon-kernel-api.rst} | 4 +- .../hwmon/{ibm-cffps => ibm-cffps.rst} | 0 Documentation/hwmon/{ibmaem => ibmaem.rst} | 0 .../hwmon/{ibmpowernv => ibmpowernv.rst} | 0 Documentation/hwmon/{ina209 => ina209.rst} | 0 Documentation/hwmon/{ina2xx => ina2xx.rst} | 2 +- Documentation/hwmon/{ina3221 => ina3221.rst} | 0 Documentation/hwmon/index.rst | 179 ++++++++++++++++++ Documentation/hwmon/{ir35221 => ir35221.rst} | 0 Documentation/hwmon/{it87 => it87.rst} | 0 Documentation/hwmon/{jc42 => jc42.rst} | 0 Documentation/hwmon/{k10temp => k10temp.rst} | 0 Documentation/hwmon/{k8temp => k8temp.rst} | 0 .../hwmon/{lineage-pem => lineage-pem.rst} | 0 Documentation/hwmon/{lm25066 => lm25066.rst} | 2 +- Documentation/hwmon/{lm63 => lm63.rst} | 0 Documentation/hwmon/{lm70 => lm70.rst} | 0 Documentation/hwmon/{lm73 => lm73.rst} | 0 Documentation/hwmon/{lm75 => lm75.rst} | 0 Documentation/hwmon/{lm77 => lm77.rst} | 0 Documentation/hwmon/{lm78 => lm78.rst} | 0 Documentation/hwmon/{lm80 => lm80.rst} | 0 Documentation/hwmon/{lm83 => lm83.rst} | 0 Documentation/hwmon/{lm85 => lm85.rst} | 0 Documentation/hwmon/{lm87 => lm87.rst} | 0 Documentation/hwmon/{lm90 => lm90.rst} | 0 Documentation/hwmon/{lm92 => lm92.rst} | 0 Documentation/hwmon/{lm93 => lm93.rst} | 0 Documentation/hwmon/{lm95234 => lm95234.rst} | 0 Documentation/hwmon/{lm95245 => lm95245.rst} | 0 Documentation/hwmon/{ltc2945 => ltc2945.rst} | 0 Documentation/hwmon/{ltc2978 => ltc2978.rst} | 0 Documentation/hwmon/{ltc2990 => ltc2990.rst} | 0 Documentation/hwmon/{ltc3815 => ltc3815.rst} | 0 Documentation/hwmon/{ltc4151 => ltc4151.rst} | 0 Documentation/hwmon/{ltc4215 => ltc4215.rst} | 0 Documentation/hwmon/{ltc4245 => ltc4245.rst} | 0 Documentation/hwmon/{ltc4260 => ltc4260.rst} | 0 Documentation/hwmon/{ltc4261 => ltc4261.rst} | 0 .../hwmon/{max16064 => max16064.rst} | 2 +- .../hwmon/{max16065 => max16065.rst} | 0 Documentation/hwmon/{max1619 => max1619.rst} | 1 - Documentation/hwmon/{max1668 => max1668.rst} | 0 Documentation/hwmon/{max197 => max197.rst} | 0 .../hwmon/{max20751 => max20751.rst} | 2 +- .../hwmon/{max31722 => max31722.rst} | 0 .../hwmon/{max31785 => max31785.rst} | 0 .../hwmon/{max31790 => max31790.rst} | 0 .../hwmon/{max34440 => max34440.rst} | 2 +- Documentation/hwmon/{max6639 => max6639.rst} | 0 Documentation/hwmon/{max6642 => max6642.rst} | 0 Documentation/hwmon/{max6650 => max6650.rst} | 1 - Documentation/hwmon/{max6697 => max6697.rst} | 0 Documentation/hwmon/{max8688 => max8688.rst} | 2 +- .../hwmon/{mc13783-adc => mc13783-adc.rst} | 0 Documentation/hwmon/{mcp3021 => mcp3021.rst} | 0 .../hwmon/{menf21bmc => menf21bmc.rst} | 0 .../hwmon/{mlxreg-fan => mlxreg-fan.rst} | 0 Documentation/hwmon/{nct6683 => nct6683.rst} | 0 Documentation/hwmon/{nct6775 => nct6775.rst} | 0 Documentation/hwmon/{nct7802 => nct7802.rst} | 0 Documentation/hwmon/{nct7904 => nct7904.rst} | 0 .../{npcm750-pwm-fan => npcm750-pwm-fan.rst} | 0 Documentation/hwmon/{nsa320 => nsa320.rst} | 0 .../{ntc_thermistor => ntc_thermistor.rst} | 0 Documentation/hwmon/{occ => occ.rst} | 0 Documentation/hwmon/{pc87360 => pc87360.rst} | 0 Documentation/hwmon/{pc87427 => pc87427.rst} | 0 Documentation/hwmon/{pcf8591 => pcf8591.rst} | 0 .../hwmon/{pmbus-core => pmbus-core.rst} | 0 Documentation/hwmon/{pmbus => pmbus.rst} | 0 .../hwmon/{powr1220 => powr1220.rst} | 0 Documentation/hwmon/{pwm-fan => pwm-fan.rst} | 0 ...aspberrypi-hwmon => raspberrypi-hwmon.rst} | 0 Documentation/hwmon/{sch5627 => sch5627.rst} | 0 Documentation/hwmon/{sch5636 => sch5636.rst} | 0 .../hwmon/{scpi-hwmon => scpi-hwmon.rst} | 0 Documentation/hwmon/{sht15 => sht15.rst} | 0 Documentation/hwmon/{sht21 => sht21.rst} | 0 Documentation/hwmon/{sht3x => sht3x.rst} | 0 Documentation/hwmon/{shtc1 => shtc1.rst} | 0 Documentation/hwmon/{sis5595 => sis5595.rst} | 1 - Documentation/hwmon/{smm665 => smm665.rst} | 0 .../hwmon/{smsc47b397 => smsc47b397.rst} | 0 .../hwmon/{smsc47m1 => smsc47m1.rst} | 0 .../hwmon/{smsc47m192 => smsc47m192.rst} | 0 ...mitting-patches => submitting-patches.rst} | 6 +- .../{sysfs-interface => sysfs-interface.rst} | 0 Documentation/hwmon/{tc654 => tc654.rst} | 0 Documentation/hwmon/{tc74 => tc74.rst} | 0 Documentation/hwmon/{thmc50 => thmc50.rst} | 1 - Documentation/hwmon/{tmp102 => tmp102.rst} | 2 +- Documentation/hwmon/{tmp103 => tmp103.rst} | 2 +- Documentation/hwmon/{tmp108 => tmp108.rst} | 2 +- Documentation/hwmon/{tmp401 => tmp401.rst} | 2 +- Documentation/hwmon/{tmp421 => tmp421.rst} | 0 .../hwmon/{tps40422 => tps40422.rst} | 2 +- ...4030-madc-hwmon => twl4030-madc-hwmon.rst} | 0 Documentation/hwmon/{ucd9000 => ucd9000.rst} | 4 +- Documentation/hwmon/{ucd9200 => ucd9200.rst} | 4 +- .../{userspace-tools => userspace-tools.rst} | 0 .../hwmon/{vexpress => vexpress.rst} | 0 Documentation/hwmon/{via686a => via686a.rst} | 0 Documentation/hwmon/{vt1211 => vt1211.rst} | 0 .../hwmon/{w83627ehf => w83627ehf.rst} | 0 .../hwmon/{w83627hf => w83627hf.rst} | 0 Documentation/hwmon/{w83773g => w83773g.rst} | 0 Documentation/hwmon/{w83781d => w83781d.rst} | 0 Documentation/hwmon/{w83791d => w83791d.rst} | 2 +- Documentation/hwmon/{w83792d => w83792d.rst} | 0 Documentation/hwmon/{w83793 => w83793.rst} | 0 Documentation/hwmon/{w83795 => w83795.rst} | 0 .../hwmon/{w83l785ts => w83l785ts.rst} | 0 .../hwmon/{w83l786ng => w83l786ng.rst} | 0 Documentation/hwmon/{wm831x => wm831x.rst} | 0 Documentation/hwmon/{wm8350 => wm8350.rst} | 0 .../hwmon/{xgene-hwmon => xgene-hwmon.rst} | 0 Documentation/hwmon/{zl6100 => zl6100.rst} | 2 +- Documentation/index.rst | 1 + Documentation/thermal/sysfs-api.txt | 2 +- MAINTAINERS | 108 +++++------ drivers/hwmon/Kconfig | 8 +- drivers/hwmon/ads7828.c | 2 +- drivers/hwmon/max197.c | 2 +- drivers/hwmon/sht15.c | 2 +- include/linux/platform_data/ads7828.h | 2 +- include/linux/platform_data/ds620.h | 2 +- include/linux/platform_data/ina2xx.h | 2 +- include/linux/platform_data/max197.h | 2 +- include/linux/platform_data/ntc_thermistor.h | 2 +- 173 files changed, 275 insertions(+), 102 deletions(-) rename Documentation/hwmon/{ab8500 => ab8500.rst} (86%) rename Documentation/hwmon/{abituguru-datasheet => abituguru-datasheet.rst} (100%) rename Documentation/hwmon/{abituguru => abituguru.rst} (100%) rename Documentation/hwmon/{abituguru3 => abituguru3.rst} (100%) rename Documentation/hwmon/{abx500 => abx500.rst} (100%) rename Documentation/hwmon/{acpi_power_meter => acpi_power_meter.rst} (97%) rename Documentation/hwmon/{ad7314 => ad7314.rst} (100%) rename Documentation/hwmon/{adc128d818 => adc128d818.rst} (100%) rename Documentation/hwmon/{adm1021 => adm1021.rst} (100%) rename Documentation/hwmon/{adm1025 => adm1025.rst} (100%) rename Documentation/hwmon/{adm1026 => adm1026.rst} (100%) rename Documentation/hwmon/{adm1031 => adm1031.rst} (100%) rename Documentation/hwmon/{adm1275 => adm1275.rst} (97%) rename Documentation/hwmon/{adm9240 => adm9240.rst} (100%) rename Documentation/hwmon/{ads1015 => ads1015.rst} (100%) rename Documentation/hwmon/{ads7828 => ads7828.rst} (100%) rename Documentation/hwmon/{adt7410 => adt7410.rst} (100%) rename Documentation/hwmon/{adt7411 => adt7411.rst} (100%) rename Documentation/hwmon/{adt7462 => adt7462.rst} (99%) rename Documentation/hwmon/{adt7470 => adt7470.rst} (100%) rename Documentation/hwmon/{adt7475 => adt7475.rst} (100%) rename Documentation/hwmon/{amc6821 => amc6821.rst} (99%) rename Documentation/hwmon/{asb100 => asb100.rst} (99%) rename Documentation/hwmon/{asc7621 => asc7621.rst} (100%) rename Documentation/hwmon/{aspeed-pwm-tacho => aspeed-pwm-tacho.rst} (100%) rename Documentation/hwmon/{coretemp => coretemp.rst} (100%) rename Documentation/hwmon/{da9052 => da9052.rst} (100%) rename Documentation/hwmon/{da9055 => da9055.rst} (100%) rename Documentation/hwmon/{dme1737 => dme1737.rst} (100%) rename Documentation/hwmon/{ds1621 => ds1621.rst} (100%) rename Documentation/hwmon/{ds620 => ds620.rst} (100%) rename Documentation/hwmon/{emc1403 => emc1403.rst} (100%) rename Documentation/hwmon/{emc2103 => emc2103.rst} (100%) rename Documentation/hwmon/{emc6w201 => emc6w201.rst} (100%) rename Documentation/hwmon/{f71805f => f71805f.rst} (100%) rename Documentation/hwmon/{f71882fg => f71882fg.rst} (100%) rename Documentation/hwmon/{fam15h_power => fam15h_power.rst} (100%) rename Documentation/hwmon/{ftsteutates => ftsteutates.rst} (100%) rename Documentation/hwmon/{g760a => g760a.rst} (100%) rename Documentation/hwmon/{g762 => g762.rst} (97%) rename Documentation/hwmon/{gl518sm => gl518sm.rst} (100%) rename Documentation/hwmon/{hih6130 => hih6130.rst} (100%) rename Documentation/hwmon/{hwmon-kernel-api.txt => hwmon-kernel-api.rst} (99%) rename Documentation/hwmon/{ibm-cffps => ibm-cffps.rst} (100%) rename Documentation/hwmon/{ibmaem => ibmaem.rst} (100%) rename Documentation/hwmon/{ibmpowernv => ibmpowernv.rst} (100%) rename Documentation/hwmon/{ina209 => ina209.rst} (100%) rename Documentation/hwmon/{ina2xx => ina2xx.rst} (97%) rename Documentation/hwmon/{ina3221 => ina3221.rst} (100%) create mode 100644 Documentation/hwmon/index.rst rename Documentation/hwmon/{ir35221 => ir35221.rst} (100%) rename Documentation/hwmon/{it87 => it87.rst} (100%) rename Documentation/hwmon/{jc42 => jc42.rst} (100%) rename Documentation/hwmon/{k10temp => k10temp.rst} (100%) rename Documentation/hwmon/{k8temp => k8temp.rst} (100%) rename Documentation/hwmon/{lineage-pem => lineage-pem.rst} (100%) rename Documentation/hwmon/{lm25066 => lm25066.rst} (97%) rename Documentation/hwmon/{lm63 => lm63.rst} (100%) rename Documentation/hwmon/{lm70 => lm70.rst} (100%) rename Documentation/hwmon/{lm73 => lm73.rst} (100%) rename Documentation/hwmon/{lm75 => lm75.rst} (100%) rename Documentation/hwmon/{lm77 => lm77.rst} (100%) rename Documentation/hwmon/{lm78 => lm78.rst} (100%) rename Documentation/hwmon/{lm80 => lm80.rst} (100%) rename Documentation/hwmon/{lm83 => lm83.rst} (100%) rename Documentation/hwmon/{lm85 => lm85.rst} (100%) rename Documentation/hwmon/{lm87 => lm87.rst} (100%) rename Documentation/hwmon/{lm90 => lm90.rst} (100%) rename Documentation/hwmon/{lm92 => lm92.rst} (100%) rename Documentation/hwmon/{lm93 => lm93.rst} (100%) rename Documentation/hwmon/{lm95234 => lm95234.rst} (100%) rename Documentation/hwmon/{lm95245 => lm95245.rst} (100%) rename Documentation/hwmon/{ltc2945 => ltc2945.rst} (100%) rename Documentation/hwmon/{ltc2978 => ltc2978.rst} (100%) rename Documentation/hwmon/{ltc2990 => ltc2990.rst} (100%) rename Documentation/hwmon/{ltc3815 => ltc3815.rst} (100%) rename Documentation/hwmon/{ltc4151 => ltc4151.rst} (100%) rename Documentation/hwmon/{ltc4215 => ltc4215.rst} (100%) rename Documentation/hwmon/{ltc4245 => ltc4245.rst} (100%) rename Documentation/hwmon/{ltc4260 => ltc4260.rst} (100%) rename Documentation/hwmon/{ltc4261 => ltc4261.rst} (100%) rename Documentation/hwmon/{max16064 => max16064.rst} (96%) rename Documentation/hwmon/{max16065 => max16065.rst} (100%) rename Documentation/hwmon/{max1619 => max1619.rst} (99%) rename Documentation/hwmon/{max1668 => max1668.rst} (100%) rename Documentation/hwmon/{max197 => max197.rst} (100%) rename Documentation/hwmon/{max20751 => max20751.rst} (96%) rename Documentation/hwmon/{max31722 => max31722.rst} (100%) rename Documentation/hwmon/{max31785 => max31785.rst} (100%) rename Documentation/hwmon/{max31790 => max31790.rst} (100%) rename Documentation/hwmon/{max34440 => max34440.rst} (98%) rename Documentation/hwmon/{max6639 => max6639.rst} (100%) rename Documentation/hwmon/{max6642 => max6642.rst} (100%) rename Documentation/hwmon/{max6650 => max6650.rst} (99%) rename Documentation/hwmon/{max6697 => max6697.rst} (100%) rename Documentation/hwmon/{max8688 => max8688.rst} (97%) rename Documentation/hwmon/{mc13783-adc => mc13783-adc.rst} (100%) rename Documentation/hwmon/{mcp3021 => mcp3021.rst} (100%) rename Documentation/hwmon/{menf21bmc => menf21bmc.rst} (100%) rename Documentation/hwmon/{mlxreg-fan => mlxreg-fan.rst} (100%) rename Documentation/hwmon/{nct6683 => nct6683.rst} (100%) rename Documentation/hwmon/{nct6775 => nct6775.rst} (100%) rename Documentation/hwmon/{nct7802 => nct7802.rst} (100%) rename Documentation/hwmon/{nct7904 => nct7904.rst} (100%) rename Documentation/hwmon/{npcm750-pwm-fan => npcm750-pwm-fan.rst} (100%) rename Documentation/hwmon/{nsa320 => nsa320.rst} (100%) rename Documentation/hwmon/{ntc_thermistor => ntc_thermistor.rst} (100%) rename Documentation/hwmon/{occ => occ.rst} (100%) rename Documentation/hwmon/{pc87360 => pc87360.rst} (100%) rename Documentation/hwmon/{pc87427 => pc87427.rst} (100%) rename Documentation/hwmon/{pcf8591 => pcf8591.rst} (100%) rename Documentation/hwmon/{pmbus-core => pmbus-core.rst} (100%) rename Documentation/hwmon/{pmbus => pmbus.rst} (100%) rename Documentation/hwmon/{powr1220 => powr1220.rst} (100%) rename Documentation/hwmon/{pwm-fan => pwm-fan.rst} (100%) rename Documentation/hwmon/{raspberrypi-hwmon => raspberrypi-hwmon.rst} (100%) rename Documentation/hwmon/{sch5627 => sch5627.rst} (100%) rename Documentation/hwmon/{sch5636 => sch5636.rst} (100%) rename Documentation/hwmon/{scpi-hwmon => scpi-hwmon.rst} (100%) rename Documentation/hwmon/{sht15 => sht15.rst} (100%) rename Documentation/hwmon/{sht21 => sht21.rst} (100%) rename Documentation/hwmon/{sht3x => sht3x.rst} (100%) rename Documentation/hwmon/{shtc1 => shtc1.rst} (100%) rename Documentation/hwmon/{sis5595 => sis5595.rst} (99%) rename Documentation/hwmon/{smm665 => smm665.rst} (100%) rename Documentation/hwmon/{smsc47b397 => smsc47b397.rst} (100%) rename Documentation/hwmon/{smsc47m1 => smsc47m1.rst} (100%) rename Documentation/hwmon/{smsc47m192 => smsc47m192.rst} (100%) rename Documentation/hwmon/{submitting-patches => submitting-patches.rst} (98%) rename Documentation/hwmon/{sysfs-interface => sysfs-interface.rst} (100%) rename Documentation/hwmon/{tc654 => tc654.rst} (100%) rename Documentation/hwmon/{tc74 => tc74.rst} (100%) rename Documentation/hwmon/{thmc50 => thmc50.rst} (99%) rename Documentation/hwmon/{tmp102 => tmp102.rst} (93%) rename Documentation/hwmon/{tmp103 => tmp103.rst} (92%) rename Documentation/hwmon/{tmp108 => tmp108.rst} (95%) rename Documentation/hwmon/{tmp401 => tmp401.rst} (97%) rename Documentation/hwmon/{tmp421 => tmp421.rst} (100%) rename Documentation/hwmon/{tps40422 => tps40422.rst} (96%) rename Documentation/hwmon/{twl4030-madc-hwmon => twl4030-madc-hwmon.rst} (100%) rename Documentation/hwmon/{ucd9000 => ucd9000.rst} (97%) rename Documentation/hwmon/{ucd9200 => ucd9200.rst} (97%) rename Documentation/hwmon/{userspace-tools => userspace-tools.rst} (100%) rename Documentation/hwmon/{vexpress => vexpress.rst} (100%) rename Documentation/hwmon/{via686a => via686a.rst} (100%) rename Documentation/hwmon/{vt1211 => vt1211.rst} (100%) rename Documentation/hwmon/{w83627ehf => w83627ehf.rst} (100%) rename Documentation/hwmon/{w83627hf => w83627hf.rst} (100%) rename Documentation/hwmon/{w83773g => w83773g.rst} (100%) rename Documentation/hwmon/{w83781d => w83781d.rst} (100%) rename Documentation/hwmon/{w83791d => w83791d.rst} (99%) rename Documentation/hwmon/{w83792d => w83792d.rst} (100%) rename Documentation/hwmon/{w83793 => w83793.rst} (100%) rename Documentation/hwmon/{w83795 => w83795.rst} (100%) rename Documentation/hwmon/{w83l785ts => w83l785ts.rst} (100%) rename Documentation/hwmon/{w83l786ng => w83l786ng.rst} (100%) rename Documentation/hwmon/{wm831x => wm831x.rst} (100%) rename Documentation/hwmon/{wm8350 => wm8350.rst} (100%) rename Documentation/hwmon/{xgene-hwmon => xgene-hwmon.rst} (100%) rename Documentation/hwmon/{zl6100 => zl6100.rst} (98%) diff --git a/Documentation/devicetree/bindings/hwmon/g762.txt b/Documentation/devicetree/bindings/hwmon/g762.txt index 25cc6d8ee575..6d154c4923de 100644 --- a/Documentation/devicetree/bindings/hwmon/g762.txt +++ b/Documentation/devicetree/bindings/hwmon/g762.txt @@ -21,7 +21,7 @@ If an optional property is not set in .dts file, then current value is kept unmodified (e.g. u-boot installed value). Additional information on operational parameters for the device is available -in Documentation/hwmon/g762. A detailed datasheet for the device is available +in Documentation/hwmon/g762.rst. A detailed datasheet for the device is available at http://natisbad.org/NAS/refs/GMT_EDS-762_763-080710-0.2.pdf. Example g762 node: diff --git a/Documentation/hwmon/ab8500 b/Documentation/hwmon/ab8500.rst similarity index 86% rename from Documentation/hwmon/ab8500 rename to Documentation/hwmon/ab8500.rst index d87c61151239..33f93a9cec04 100644 --- a/Documentation/hwmon/ab8500 +++ b/Documentation/hwmon/ab8500.rst @@ -18,7 +18,7 @@ Authors: Description ----------- -See also Documentation/hwmon/abx500. This is the ST-Ericsson AB8500 specific +See also Documentation/hwmon/abx500.rst. This is the ST-Ericsson AB8500 specific driver. Currently only the AB8500 internal sensor and one external sensor for battery diff --git a/Documentation/hwmon/abituguru-datasheet b/Documentation/hwmon/abituguru-datasheet.rst similarity index 100% rename from Documentation/hwmon/abituguru-datasheet rename to Documentation/hwmon/abituguru-datasheet.rst diff --git a/Documentation/hwmon/abituguru b/Documentation/hwmon/abituguru.rst similarity index 100% rename from Documentation/hwmon/abituguru rename to Documentation/hwmon/abituguru.rst diff --git a/Documentation/hwmon/abituguru3 b/Documentation/hwmon/abituguru3.rst similarity index 100% rename from Documentation/hwmon/abituguru3 rename to Documentation/hwmon/abituguru3.rst diff --git a/Documentation/hwmon/abx500 b/Documentation/hwmon/abx500.rst similarity index 100% rename from Documentation/hwmon/abx500 rename to Documentation/hwmon/abx500.rst diff --git a/Documentation/hwmon/acpi_power_meter b/Documentation/hwmon/acpi_power_meter.rst similarity index 97% rename from Documentation/hwmon/acpi_power_meter rename to Documentation/hwmon/acpi_power_meter.rst index 7665ca6ba957..4a0941ade0ca 100644 --- a/Documentation/hwmon/acpi_power_meter +++ b/Documentation/hwmon/acpi_power_meter.rst @@ -21,7 +21,7 @@ the ACPI 4.0 spec (Chapter 10.4). These devices have a simple set of features--a power meter that returns average power use over a configurable interval, an optional capping mechanism, and a couple of trip points. The sysfs interface conforms with the specification outlined in the "Power" section -of Documentation/hwmon/sysfs-interface. +of Documentation/hwmon/sysfs-interface.rst. Special Features ---------------- diff --git a/Documentation/hwmon/ad7314 b/Documentation/hwmon/ad7314.rst similarity index 100% rename from Documentation/hwmon/ad7314 rename to Documentation/hwmon/ad7314.rst diff --git a/Documentation/hwmon/adc128d818 b/Documentation/hwmon/adc128d818.rst similarity index 100% rename from Documentation/hwmon/adc128d818 rename to Documentation/hwmon/adc128d818.rst diff --git a/Documentation/hwmon/adm1021 b/Documentation/hwmon/adm1021.rst similarity index 100% rename from Documentation/hwmon/adm1021 rename to Documentation/hwmon/adm1021.rst diff --git a/Documentation/hwmon/adm1025 b/Documentation/hwmon/adm1025.rst similarity index 100% rename from Documentation/hwmon/adm1025 rename to Documentation/hwmon/adm1025.rst diff --git a/Documentation/hwmon/adm1026 b/Documentation/hwmon/adm1026.rst similarity index 100% rename from Documentation/hwmon/adm1026 rename to Documentation/hwmon/adm1026.rst diff --git a/Documentation/hwmon/adm1031 b/Documentation/hwmon/adm1031.rst similarity index 100% rename from Documentation/hwmon/adm1031 rename to Documentation/hwmon/adm1031.rst diff --git a/Documentation/hwmon/adm1275 b/Documentation/hwmon/adm1275.rst similarity index 97% rename from Documentation/hwmon/adm1275 rename to Documentation/hwmon/adm1275.rst index 5c5860011d6e..9a1913e5b4d9 100644 --- a/Documentation/hwmon/adm1275 +++ b/Documentation/hwmon/adm1275.rst @@ -68,7 +68,7 @@ integrated 12 bit analog-to-digital converter (ADC), accessed using a PMBus interface. The driver is a client driver to the core PMBus driver. Please see -Documentation/hwmon/pmbus for details on PMBus client drivers. +Documentation/hwmon/pmbus.rst for details on PMBus client drivers. Usage Notes @@ -90,7 +90,7 @@ Platform data support --------------------- The driver supports standard PMBus driver platform data. Please see -Documentation/hwmon/pmbus for details. +Documentation/hwmon/pmbus.rst for details. Sysfs entries diff --git a/Documentation/hwmon/adm9240 b/Documentation/hwmon/adm9240.rst similarity index 100% rename from Documentation/hwmon/adm9240 rename to Documentation/hwmon/adm9240.rst diff --git a/Documentation/hwmon/ads1015 b/Documentation/hwmon/ads1015.rst similarity index 100% rename from Documentation/hwmon/ads1015 rename to Documentation/hwmon/ads1015.rst diff --git a/Documentation/hwmon/ads7828 b/Documentation/hwmon/ads7828.rst similarity index 100% rename from Documentation/hwmon/ads7828 rename to Documentation/hwmon/ads7828.rst diff --git a/Documentation/hwmon/adt7410 b/Documentation/hwmon/adt7410.rst similarity index 100% rename from Documentation/hwmon/adt7410 rename to Documentation/hwmon/adt7410.rst diff --git a/Documentation/hwmon/adt7411 b/Documentation/hwmon/adt7411.rst similarity index 100% rename from Documentation/hwmon/adt7411 rename to Documentation/hwmon/adt7411.rst diff --git a/Documentation/hwmon/adt7462 b/Documentation/hwmon/adt7462.rst similarity index 99% rename from Documentation/hwmon/adt7462 rename to Documentation/hwmon/adt7462.rst index a7a831118d32..139e19696188 100644 --- a/Documentation/hwmon/adt7462 +++ b/Documentation/hwmon/adt7462.rst @@ -68,4 +68,3 @@ The ADT7462 will scale the pwm between the lower and higher pwm speed when the temperature is between the two temperature boundaries. PWM values range from 0 (off) to 255 (full speed). Fan speed will be set to maximum when the temperature sensor associated with the PWM control exceeds temp#_max. - diff --git a/Documentation/hwmon/adt7470 b/Documentation/hwmon/adt7470.rst similarity index 100% rename from Documentation/hwmon/adt7470 rename to Documentation/hwmon/adt7470.rst diff --git a/Documentation/hwmon/adt7475 b/Documentation/hwmon/adt7475.rst similarity index 100% rename from Documentation/hwmon/adt7475 rename to Documentation/hwmon/adt7475.rst diff --git a/Documentation/hwmon/amc6821 b/Documentation/hwmon/amc6821.rst similarity index 99% rename from Documentation/hwmon/amc6821 rename to Documentation/hwmon/amc6821.rst index d10eabcbc0f3..5ddb2849da90 100644 --- a/Documentation/hwmon/amc6821 +++ b/Documentation/hwmon/amc6821.rst @@ -106,4 +106,3 @@ different settings, you can set the following parameters: - init=1, - pwminv: 0 default pwm output, 1 inverts pwm output. - diff --git a/Documentation/hwmon/asb100 b/Documentation/hwmon/asb100.rst similarity index 99% rename from Documentation/hwmon/asb100 rename to Documentation/hwmon/asb100.rst index 311d9f7b6926..c2d5f97085fe 100644 --- a/Documentation/hwmon/asb100 +++ b/Documentation/hwmon/asb100.rst @@ -71,4 +71,3 @@ TODO: * Experiment with temp. sensor types. * Are there really 13 voltage inputs? Probably not... * Cleanups, no doubt... - diff --git a/Documentation/hwmon/asc7621 b/Documentation/hwmon/asc7621.rst similarity index 100% rename from Documentation/hwmon/asc7621 rename to Documentation/hwmon/asc7621.rst diff --git a/Documentation/hwmon/aspeed-pwm-tacho b/Documentation/hwmon/aspeed-pwm-tacho.rst similarity index 100% rename from Documentation/hwmon/aspeed-pwm-tacho rename to Documentation/hwmon/aspeed-pwm-tacho.rst diff --git a/Documentation/hwmon/coretemp b/Documentation/hwmon/coretemp.rst similarity index 100% rename from Documentation/hwmon/coretemp rename to Documentation/hwmon/coretemp.rst diff --git a/Documentation/hwmon/da9052 b/Documentation/hwmon/da9052.rst similarity index 100% rename from Documentation/hwmon/da9052 rename to Documentation/hwmon/da9052.rst diff --git a/Documentation/hwmon/da9055 b/Documentation/hwmon/da9055.rst similarity index 100% rename from Documentation/hwmon/da9055 rename to Documentation/hwmon/da9055.rst diff --git a/Documentation/hwmon/dme1737 b/Documentation/hwmon/dme1737.rst similarity index 100% rename from Documentation/hwmon/dme1737 rename to Documentation/hwmon/dme1737.rst diff --git a/Documentation/hwmon/ds1621 b/Documentation/hwmon/ds1621.rst similarity index 100% rename from Documentation/hwmon/ds1621 rename to Documentation/hwmon/ds1621.rst diff --git a/Documentation/hwmon/ds620 b/Documentation/hwmon/ds620.rst similarity index 100% rename from Documentation/hwmon/ds620 rename to Documentation/hwmon/ds620.rst diff --git a/Documentation/hwmon/emc1403 b/Documentation/hwmon/emc1403.rst similarity index 100% rename from Documentation/hwmon/emc1403 rename to Documentation/hwmon/emc1403.rst diff --git a/Documentation/hwmon/emc2103 b/Documentation/hwmon/emc2103.rst similarity index 100% rename from Documentation/hwmon/emc2103 rename to Documentation/hwmon/emc2103.rst diff --git a/Documentation/hwmon/emc6w201 b/Documentation/hwmon/emc6w201.rst similarity index 100% rename from Documentation/hwmon/emc6w201 rename to Documentation/hwmon/emc6w201.rst diff --git a/Documentation/hwmon/f71805f b/Documentation/hwmon/f71805f.rst similarity index 100% rename from Documentation/hwmon/f71805f rename to Documentation/hwmon/f71805f.rst diff --git a/Documentation/hwmon/f71882fg b/Documentation/hwmon/f71882fg.rst similarity index 100% rename from Documentation/hwmon/f71882fg rename to Documentation/hwmon/f71882fg.rst diff --git a/Documentation/hwmon/fam15h_power b/Documentation/hwmon/fam15h_power.rst similarity index 100% rename from Documentation/hwmon/fam15h_power rename to Documentation/hwmon/fam15h_power.rst diff --git a/Documentation/hwmon/ftsteutates b/Documentation/hwmon/ftsteutates.rst similarity index 100% rename from Documentation/hwmon/ftsteutates rename to Documentation/hwmon/ftsteutates.rst diff --git a/Documentation/hwmon/g760a b/Documentation/hwmon/g760a.rst similarity index 100% rename from Documentation/hwmon/g760a rename to Documentation/hwmon/g760a.rst diff --git a/Documentation/hwmon/g762 b/Documentation/hwmon/g762.rst similarity index 97% rename from Documentation/hwmon/g762 rename to Documentation/hwmon/g762.rst index 54574e26df21..0371b3365c48 100644 --- a/Documentation/hwmon/g762 +++ b/Documentation/hwmon/g762.rst @@ -7,7 +7,7 @@ modes - PWM or DC - are supported by the device. For additional information, a detailed datasheet is available at http://natisbad.org/NAS/ref/GMT_EDS-762_763-080710-0.2.pdf. sysfs -bindings are described in Documentation/hwmon/sysfs-interface. +bindings are described in Documentation/hwmon/sysfs-interface.rst. The following entries are available to the user in a subdirectory of /sys/bus/i2c/drivers/g762/ to control the operation of the device. diff --git a/Documentation/hwmon/gl518sm b/Documentation/hwmon/gl518sm.rst similarity index 100% rename from Documentation/hwmon/gl518sm rename to Documentation/hwmon/gl518sm.rst diff --git a/Documentation/hwmon/hih6130 b/Documentation/hwmon/hih6130.rst similarity index 100% rename from Documentation/hwmon/hih6130 rename to Documentation/hwmon/hih6130.rst diff --git a/Documentation/hwmon/hwmon-kernel-api.txt b/Documentation/hwmon/hwmon-kernel-api.rst similarity index 99% rename from Documentation/hwmon/hwmon-kernel-api.txt rename to Documentation/hwmon/hwmon-kernel-api.rst index b347b959fcda..c41eb6108103 100644 --- a/Documentation/hwmon/hwmon-kernel-api.txt +++ b/Documentation/hwmon/hwmon-kernel-api.rst @@ -12,10 +12,10 @@ drivers that want to use the hardware monitoring framework. This document does not describe what a hardware monitoring (hwmon) Driver or Device is. It also does not describe the API which can be used by user space to communicate with a hardware monitoring device. If you want to know this -then please read the following file: Documentation/hwmon/sysfs-interface. +then please read the following file: Documentation/hwmon/sysfs-interface.rst. For additional guidelines on how to write and improve hwmon drivers, please -also read Documentation/hwmon/submitting-patches. +also read Documentation/hwmon/submitting-patches.rst. The API ------- diff --git a/Documentation/hwmon/ibm-cffps b/Documentation/hwmon/ibm-cffps.rst similarity index 100% rename from Documentation/hwmon/ibm-cffps rename to Documentation/hwmon/ibm-cffps.rst diff --git a/Documentation/hwmon/ibmaem b/Documentation/hwmon/ibmaem.rst similarity index 100% rename from Documentation/hwmon/ibmaem rename to Documentation/hwmon/ibmaem.rst diff --git a/Documentation/hwmon/ibmpowernv b/Documentation/hwmon/ibmpowernv.rst similarity index 100% rename from Documentation/hwmon/ibmpowernv rename to Documentation/hwmon/ibmpowernv.rst diff --git a/Documentation/hwmon/ina209 b/Documentation/hwmon/ina209.rst similarity index 100% rename from Documentation/hwmon/ina209 rename to Documentation/hwmon/ina209.rst diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx.rst similarity index 97% rename from Documentation/hwmon/ina2xx rename to Documentation/hwmon/ina2xx.rst index 95badf9c396f..94b9a260c518 100644 --- a/Documentation/hwmon/ina2xx +++ b/Documentation/hwmon/ina2xx.rst @@ -78,7 +78,7 @@ refer to the Documentation/devicetree/bindings/hwmon/ina2xx.txt for bindings if the device tree is used. Additionally ina226 supports update_interval attribute as described in -Documentation/hwmon/sysfs-interface. Internally the interval is the sum of +Documentation/hwmon/sysfs-interface.rst. Internally the interval is the sum of bus and shunt voltage conversion times multiplied by the averaging rate. We don't touch the conversion times and only modify the number of averages. The lower limit of the update_interval is 2 ms, the upper limit is 2253 ms. diff --git a/Documentation/hwmon/ina3221 b/Documentation/hwmon/ina3221.rst similarity index 100% rename from Documentation/hwmon/ina3221 rename to Documentation/hwmon/ina3221.rst diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst new file mode 100644 index 000000000000..893804414510 --- /dev/null +++ b/Documentation/hwmon/index.rst @@ -0,0 +1,179 @@ +========================= +Linux Hardware Monitoring +========================= + +.. toctree:: + :maxdepth: 1 + + hwmon-kernel-api.rst + pmbus-core.rst + submitting-patches.rst + sysfs-interface.rst + userspace-tools.rst + +Hardware Monitoring Kernel Drivers +================================== + +.. toctree:: + :maxdepth: 1 + + ab8500.rst + abituguru.rst + abituguru3.rst + abx500.rst + acpi_power_meter.rst + ad7314.rst + adc128d818.rst + adm1021.rst + adm1025.rst + adm1026.rst + adm1031.rst + adm1275.rst + adm9240.rst + ads1015.rst + ads7828.rst + adt7410.rst + adt7411.rst + adt7462.rst + adt7470.rst + adt7475.rst + amc6821.rst + asb100.rst + asc7621.rst + aspeed-pwm-tacho.rst + coretemp.rst + da9052.rst + da9055.rst + dme1737.rst + ds1621.rst + ds620.rst + emc1403.rst + emc2103.rst + emc6w201.rst + f71805f.rst + f71882fg.rst + fam15h_power.rst + ftsteutates.rst + g760a.rst + g762.rst + gl518sm.rst + hih6130.rst + ibmaem.rst + ibm-cffps.rst + ibmpowernv.rst + ina209.rst + ina2xx.rst + ina3221.rst + ir35221.rst + it87.rst + jc42.rst + k10temp.rst + k8temp.rst + lineage-pem.rst + lm25066.rst + lm63.rst + lm70.rst + lm73.rst + lm75.rst + lm77.rst + lm78.rst + lm80.rst + lm83.rst + lm85.rst + lm87.rst + lm90.rst + lm92.rst + lm93.rst + lm95234.rst + lm95245.rst + ltc2945.rst + ltc2978.rst + ltc2990.rst + ltc3815.rst + ltc4151.rst + ltc4215.rst + ltc4245.rst + ltc4260.rst + ltc4261.rst + max16064.rst + max16065.rst + max1619.rst + max1668.rst + max197.rst + max20751.rst + max31722.rst + max31785.rst + max31790.rst + max34440.rst + max6639.rst + max6642.rst + max6650.rst + max6697.rst + max8688.rst + mc13783-adc.rst + mcp3021.rst + menf21bmc.rst + mlxreg-fan.rst + nct6683.rst + nct6775.rst + nct7802.rst + nct7904.rst + npcm750-pwm-fan.rst + nsa320.rst + ntc_thermistor.rst + occ.rst + pc87360.rst + pc87427.rst + pcf8591.rst + pmbus.rst + powr1220.rst + pwm-fan.rst + raspberrypi-hwmon.rst + sch5627.rst + sch5636.rst + scpi-hwmon.rst + sht15.rst + sht21.rst + sht3x.rst + shtc1.rst + sis5595.rst + smm665.rst + smsc47b397.rst + smsc47m192.rst + smsc47m1.rst + tc654.rst + tc74.rst + thmc50.rst + tmp102.rst + tmp103.rst + tmp108.rst + tmp401.rst + tmp421.rst + tps40422.rst + twl4030-madc-hwmon.rst + ucd9000.rst + ucd9200.rst + vexpress.rst + via686a.rst + vt1211.rst + w83627ehf.rst + w83627hf.rst + w83773g.rst + w83781d.rst + w83791d.rst + w83792d.rst + w83793.rst + w83795.rst + w83l785ts.rst + w83l786ng.rst + wm831x.rst + wm8350.rst + xgene-hwmon.rst + zl6100.rst + +.. only:: subproject and html + + Indices + ======= + + * :ref:`genindex` diff --git a/Documentation/hwmon/ir35221 b/Documentation/hwmon/ir35221.rst similarity index 100% rename from Documentation/hwmon/ir35221 rename to Documentation/hwmon/ir35221.rst diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87.rst similarity index 100% rename from Documentation/hwmon/it87 rename to Documentation/hwmon/it87.rst diff --git a/Documentation/hwmon/jc42 b/Documentation/hwmon/jc42.rst similarity index 100% rename from Documentation/hwmon/jc42 rename to Documentation/hwmon/jc42.rst diff --git a/Documentation/hwmon/k10temp b/Documentation/hwmon/k10temp.rst similarity index 100% rename from Documentation/hwmon/k10temp rename to Documentation/hwmon/k10temp.rst diff --git a/Documentation/hwmon/k8temp b/Documentation/hwmon/k8temp.rst similarity index 100% rename from Documentation/hwmon/k8temp rename to Documentation/hwmon/k8temp.rst diff --git a/Documentation/hwmon/lineage-pem b/Documentation/hwmon/lineage-pem.rst similarity index 100% rename from Documentation/hwmon/lineage-pem rename to Documentation/hwmon/lineage-pem.rst diff --git a/Documentation/hwmon/lm25066 b/Documentation/hwmon/lm25066.rst similarity index 97% rename from Documentation/hwmon/lm25066 rename to Documentation/hwmon/lm25066.rst index 60b7f2722931..da15e3094c8c 100644 --- a/Documentation/hwmon/lm25066 +++ b/Documentation/hwmon/lm25066.rst @@ -69,7 +69,7 @@ LM25066, LM5064, and LM5066/LM5066I Power Management, Monitoring, Control, and Protection ICs. The driver is a client driver to the core PMBus driver. Please see -Documentation/hwmon/pmbus for details on PMBus client drivers. +Documentation/hwmon/pmbus.rst for details on PMBus client drivers. Usage Notes diff --git a/Documentation/hwmon/lm63 b/Documentation/hwmon/lm63.rst similarity index 100% rename from Documentation/hwmon/lm63 rename to Documentation/hwmon/lm63.rst diff --git a/Documentation/hwmon/lm70 b/Documentation/hwmon/lm70.rst similarity index 100% rename from Documentation/hwmon/lm70 rename to Documentation/hwmon/lm70.rst diff --git a/Documentation/hwmon/lm73 b/Documentation/hwmon/lm73.rst similarity index 100% rename from Documentation/hwmon/lm73 rename to Documentation/hwmon/lm73.rst diff --git a/Documentation/hwmon/lm75 b/Documentation/hwmon/lm75.rst similarity index 100% rename from Documentation/hwmon/lm75 rename to Documentation/hwmon/lm75.rst diff --git a/Documentation/hwmon/lm77 b/Documentation/hwmon/lm77.rst similarity index 100% rename from Documentation/hwmon/lm77 rename to Documentation/hwmon/lm77.rst diff --git a/Documentation/hwmon/lm78 b/Documentation/hwmon/lm78.rst similarity index 100% rename from Documentation/hwmon/lm78 rename to Documentation/hwmon/lm78.rst diff --git a/Documentation/hwmon/lm80 b/Documentation/hwmon/lm80.rst similarity index 100% rename from Documentation/hwmon/lm80 rename to Documentation/hwmon/lm80.rst diff --git a/Documentation/hwmon/lm83 b/Documentation/hwmon/lm83.rst similarity index 100% rename from Documentation/hwmon/lm83 rename to Documentation/hwmon/lm83.rst diff --git a/Documentation/hwmon/lm85 b/Documentation/hwmon/lm85.rst similarity index 100% rename from Documentation/hwmon/lm85 rename to Documentation/hwmon/lm85.rst diff --git a/Documentation/hwmon/lm87 b/Documentation/hwmon/lm87.rst similarity index 100% rename from Documentation/hwmon/lm87 rename to Documentation/hwmon/lm87.rst diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90.rst similarity index 100% rename from Documentation/hwmon/lm90 rename to Documentation/hwmon/lm90.rst diff --git a/Documentation/hwmon/lm92 b/Documentation/hwmon/lm92.rst similarity index 100% rename from Documentation/hwmon/lm92 rename to Documentation/hwmon/lm92.rst diff --git a/Documentation/hwmon/lm93 b/Documentation/hwmon/lm93.rst similarity index 100% rename from Documentation/hwmon/lm93 rename to Documentation/hwmon/lm93.rst diff --git a/Documentation/hwmon/lm95234 b/Documentation/hwmon/lm95234.rst similarity index 100% rename from Documentation/hwmon/lm95234 rename to Documentation/hwmon/lm95234.rst diff --git a/Documentation/hwmon/lm95245 b/Documentation/hwmon/lm95245.rst similarity index 100% rename from Documentation/hwmon/lm95245 rename to Documentation/hwmon/lm95245.rst diff --git a/Documentation/hwmon/ltc2945 b/Documentation/hwmon/ltc2945.rst similarity index 100% rename from Documentation/hwmon/ltc2945 rename to Documentation/hwmon/ltc2945.rst diff --git a/Documentation/hwmon/ltc2978 b/Documentation/hwmon/ltc2978.rst similarity index 100% rename from Documentation/hwmon/ltc2978 rename to Documentation/hwmon/ltc2978.rst diff --git a/Documentation/hwmon/ltc2990 b/Documentation/hwmon/ltc2990.rst similarity index 100% rename from Documentation/hwmon/ltc2990 rename to Documentation/hwmon/ltc2990.rst diff --git a/Documentation/hwmon/ltc3815 b/Documentation/hwmon/ltc3815.rst similarity index 100% rename from Documentation/hwmon/ltc3815 rename to Documentation/hwmon/ltc3815.rst diff --git a/Documentation/hwmon/ltc4151 b/Documentation/hwmon/ltc4151.rst similarity index 100% rename from Documentation/hwmon/ltc4151 rename to Documentation/hwmon/ltc4151.rst diff --git a/Documentation/hwmon/ltc4215 b/Documentation/hwmon/ltc4215.rst similarity index 100% rename from Documentation/hwmon/ltc4215 rename to Documentation/hwmon/ltc4215.rst diff --git a/Documentation/hwmon/ltc4245 b/Documentation/hwmon/ltc4245.rst similarity index 100% rename from Documentation/hwmon/ltc4245 rename to Documentation/hwmon/ltc4245.rst diff --git a/Documentation/hwmon/ltc4260 b/Documentation/hwmon/ltc4260.rst similarity index 100% rename from Documentation/hwmon/ltc4260 rename to Documentation/hwmon/ltc4260.rst diff --git a/Documentation/hwmon/ltc4261 b/Documentation/hwmon/ltc4261.rst similarity index 100% rename from Documentation/hwmon/ltc4261 rename to Documentation/hwmon/ltc4261.rst diff --git a/Documentation/hwmon/max16064 b/Documentation/hwmon/max16064.rst similarity index 96% rename from Documentation/hwmon/max16064 rename to Documentation/hwmon/max16064.rst index 61ec679dc477..6d5e9538991f 100644 --- a/Documentation/hwmon/max16064 +++ b/Documentation/hwmon/max16064.rst @@ -21,7 +21,7 @@ This driver supports hardware monitoring for Maxim MAX16064 Quad Power-Supply Controller with Active-Voltage Output Control and PMBus Interface. The driver is a client driver to the core PMBus driver. -Please see Documentation/hwmon/pmbus for details on PMBus client drivers. +Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers. Usage Notes diff --git a/Documentation/hwmon/max16065 b/Documentation/hwmon/max16065.rst similarity index 100% rename from Documentation/hwmon/max16065 rename to Documentation/hwmon/max16065.rst diff --git a/Documentation/hwmon/max1619 b/Documentation/hwmon/max1619.rst similarity index 99% rename from Documentation/hwmon/max1619 rename to Documentation/hwmon/max1619.rst index 4b3762c4eceb..e25956e70f73 100644 --- a/Documentation/hwmon/max1619 +++ b/Documentation/hwmon/max1619.rst @@ -31,4 +31,3 @@ Only the external sensor has high and low limits. The max1619 driver will not update its values more frequently than every other second; reading them more often will do no harm, but will return 'old' values. - diff --git a/Documentation/hwmon/max1668 b/Documentation/hwmon/max1668.rst similarity index 100% rename from Documentation/hwmon/max1668 rename to Documentation/hwmon/max1668.rst diff --git a/Documentation/hwmon/max197 b/Documentation/hwmon/max197.rst similarity index 100% rename from Documentation/hwmon/max197 rename to Documentation/hwmon/max197.rst diff --git a/Documentation/hwmon/max20751 b/Documentation/hwmon/max20751.rst similarity index 96% rename from Documentation/hwmon/max20751 rename to Documentation/hwmon/max20751.rst index d546695900ef..aa4469be6674 100644 --- a/Documentation/hwmon/max20751 +++ b/Documentation/hwmon/max20751.rst @@ -23,7 +23,7 @@ This driver supports MAX20751 Multiphase Master with PMBus Interface and Internal Buck Converter. The driver is a client driver to the core PMBus driver. -Please see Documentation/hwmon/pmbus for details on PMBus client drivers. +Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers. Usage Notes diff --git a/Documentation/hwmon/max31722 b/Documentation/hwmon/max31722.rst similarity index 100% rename from Documentation/hwmon/max31722 rename to Documentation/hwmon/max31722.rst diff --git a/Documentation/hwmon/max31785 b/Documentation/hwmon/max31785.rst similarity index 100% rename from Documentation/hwmon/max31785 rename to Documentation/hwmon/max31785.rst diff --git a/Documentation/hwmon/max31790 b/Documentation/hwmon/max31790.rst similarity index 100% rename from Documentation/hwmon/max31790 rename to Documentation/hwmon/max31790.rst diff --git a/Documentation/hwmon/max34440 b/Documentation/hwmon/max34440.rst similarity index 98% rename from Documentation/hwmon/max34440 rename to Documentation/hwmon/max34440.rst index 639838ef29fd..939138e12b02 100644 --- a/Documentation/hwmon/max34440 +++ b/Documentation/hwmon/max34440.rst @@ -76,7 +76,7 @@ based on GIN pins. The MAX34460 supports 12 voltage channels, and the MAX34461 supports 16 voltage channels. The driver is a client driver to the core PMBus driver. Please see -Documentation/hwmon/pmbus for details on PMBus client drivers. +Documentation/hwmon/pmbus.rst for details on PMBus client drivers. Usage Notes diff --git a/Documentation/hwmon/max6639 b/Documentation/hwmon/max6639.rst similarity index 100% rename from Documentation/hwmon/max6639 rename to Documentation/hwmon/max6639.rst diff --git a/Documentation/hwmon/max6642 b/Documentation/hwmon/max6642.rst similarity index 100% rename from Documentation/hwmon/max6642 rename to Documentation/hwmon/max6642.rst diff --git a/Documentation/hwmon/max6650 b/Documentation/hwmon/max6650.rst similarity index 99% rename from Documentation/hwmon/max6650 rename to Documentation/hwmon/max6650.rst index 74dc3f0caaa2..253482add082 100644 --- a/Documentation/hwmon/max6650 +++ b/Documentation/hwmon/max6650.rst @@ -72,4 +72,3 @@ clock: The clock frequency in Hz of the chip the driver should assume [254000] Please have a look at the MAX6650/6651 data sheet and make sure that you fully understand the meaning of these parameters before you attempt to change them. - diff --git a/Documentation/hwmon/max6697 b/Documentation/hwmon/max6697.rst similarity index 100% rename from Documentation/hwmon/max6697 rename to Documentation/hwmon/max6697.rst diff --git a/Documentation/hwmon/max8688 b/Documentation/hwmon/max8688.rst similarity index 97% rename from Documentation/hwmon/max8688 rename to Documentation/hwmon/max8688.rst index 43da139234c1..009487759c61 100644 --- a/Documentation/hwmon/max8688 +++ b/Documentation/hwmon/max8688.rst @@ -21,7 +21,7 @@ This driver supports hardware monitoring for Maxim MAX8688 Digital Power-Supply Controller/Monitor with PMBus Interface. The driver is a client driver to the core PMBus driver. Please see -Documentation/hwmon/pmbus for details on PMBus client drivers. +Documentation/hwmon/pmbus.rst for details on PMBus client drivers. Usage Notes diff --git a/Documentation/hwmon/mc13783-adc b/Documentation/hwmon/mc13783-adc.rst similarity index 100% rename from Documentation/hwmon/mc13783-adc rename to Documentation/hwmon/mc13783-adc.rst diff --git a/Documentation/hwmon/mcp3021 b/Documentation/hwmon/mcp3021.rst similarity index 100% rename from Documentation/hwmon/mcp3021 rename to Documentation/hwmon/mcp3021.rst diff --git a/Documentation/hwmon/menf21bmc b/Documentation/hwmon/menf21bmc.rst similarity index 100% rename from Documentation/hwmon/menf21bmc rename to Documentation/hwmon/menf21bmc.rst diff --git a/Documentation/hwmon/mlxreg-fan b/Documentation/hwmon/mlxreg-fan.rst similarity index 100% rename from Documentation/hwmon/mlxreg-fan rename to Documentation/hwmon/mlxreg-fan.rst diff --git a/Documentation/hwmon/nct6683 b/Documentation/hwmon/nct6683.rst similarity index 100% rename from Documentation/hwmon/nct6683 rename to Documentation/hwmon/nct6683.rst diff --git a/Documentation/hwmon/nct6775 b/Documentation/hwmon/nct6775.rst similarity index 100% rename from Documentation/hwmon/nct6775 rename to Documentation/hwmon/nct6775.rst diff --git a/Documentation/hwmon/nct7802 b/Documentation/hwmon/nct7802.rst similarity index 100% rename from Documentation/hwmon/nct7802 rename to Documentation/hwmon/nct7802.rst diff --git a/Documentation/hwmon/nct7904 b/Documentation/hwmon/nct7904.rst similarity index 100% rename from Documentation/hwmon/nct7904 rename to Documentation/hwmon/nct7904.rst diff --git a/Documentation/hwmon/npcm750-pwm-fan b/Documentation/hwmon/npcm750-pwm-fan.rst similarity index 100% rename from Documentation/hwmon/npcm750-pwm-fan rename to Documentation/hwmon/npcm750-pwm-fan.rst diff --git a/Documentation/hwmon/nsa320 b/Documentation/hwmon/nsa320.rst similarity index 100% rename from Documentation/hwmon/nsa320 rename to Documentation/hwmon/nsa320.rst diff --git a/Documentation/hwmon/ntc_thermistor b/Documentation/hwmon/ntc_thermistor.rst similarity index 100% rename from Documentation/hwmon/ntc_thermistor rename to Documentation/hwmon/ntc_thermistor.rst diff --git a/Documentation/hwmon/occ b/Documentation/hwmon/occ.rst similarity index 100% rename from Documentation/hwmon/occ rename to Documentation/hwmon/occ.rst diff --git a/Documentation/hwmon/pc87360 b/Documentation/hwmon/pc87360.rst similarity index 100% rename from Documentation/hwmon/pc87360 rename to Documentation/hwmon/pc87360.rst diff --git a/Documentation/hwmon/pc87427 b/Documentation/hwmon/pc87427.rst similarity index 100% rename from Documentation/hwmon/pc87427 rename to Documentation/hwmon/pc87427.rst diff --git a/Documentation/hwmon/pcf8591 b/Documentation/hwmon/pcf8591.rst similarity index 100% rename from Documentation/hwmon/pcf8591 rename to Documentation/hwmon/pcf8591.rst diff --git a/Documentation/hwmon/pmbus-core b/Documentation/hwmon/pmbus-core.rst similarity index 100% rename from Documentation/hwmon/pmbus-core rename to Documentation/hwmon/pmbus-core.rst diff --git a/Documentation/hwmon/pmbus b/Documentation/hwmon/pmbus.rst similarity index 100% rename from Documentation/hwmon/pmbus rename to Documentation/hwmon/pmbus.rst diff --git a/Documentation/hwmon/powr1220 b/Documentation/hwmon/powr1220.rst similarity index 100% rename from Documentation/hwmon/powr1220 rename to Documentation/hwmon/powr1220.rst diff --git a/Documentation/hwmon/pwm-fan b/Documentation/hwmon/pwm-fan.rst similarity index 100% rename from Documentation/hwmon/pwm-fan rename to Documentation/hwmon/pwm-fan.rst diff --git a/Documentation/hwmon/raspberrypi-hwmon b/Documentation/hwmon/raspberrypi-hwmon.rst similarity index 100% rename from Documentation/hwmon/raspberrypi-hwmon rename to Documentation/hwmon/raspberrypi-hwmon.rst diff --git a/Documentation/hwmon/sch5627 b/Documentation/hwmon/sch5627.rst similarity index 100% rename from Documentation/hwmon/sch5627 rename to Documentation/hwmon/sch5627.rst diff --git a/Documentation/hwmon/sch5636 b/Documentation/hwmon/sch5636.rst similarity index 100% rename from Documentation/hwmon/sch5636 rename to Documentation/hwmon/sch5636.rst diff --git a/Documentation/hwmon/scpi-hwmon b/Documentation/hwmon/scpi-hwmon.rst similarity index 100% rename from Documentation/hwmon/scpi-hwmon rename to Documentation/hwmon/scpi-hwmon.rst diff --git a/Documentation/hwmon/sht15 b/Documentation/hwmon/sht15.rst similarity index 100% rename from Documentation/hwmon/sht15 rename to Documentation/hwmon/sht15.rst diff --git a/Documentation/hwmon/sht21 b/Documentation/hwmon/sht21.rst similarity index 100% rename from Documentation/hwmon/sht21 rename to Documentation/hwmon/sht21.rst diff --git a/Documentation/hwmon/sht3x b/Documentation/hwmon/sht3x.rst similarity index 100% rename from Documentation/hwmon/sht3x rename to Documentation/hwmon/sht3x.rst diff --git a/Documentation/hwmon/shtc1 b/Documentation/hwmon/shtc1.rst similarity index 100% rename from Documentation/hwmon/shtc1 rename to Documentation/hwmon/shtc1.rst diff --git a/Documentation/hwmon/sis5595 b/Documentation/hwmon/sis5595.rst similarity index 99% rename from Documentation/hwmon/sis5595 rename to Documentation/hwmon/sis5595.rst index 5acba6b0c0db..16123b3bfff9 100644 --- a/Documentation/hwmon/sis5595 +++ b/Documentation/hwmon/sis5595.rst @@ -121,4 +121,3 @@ Problems -------- Some chips refuse to be enabled. We don't know why. The driver will recognize this and print a message in dmesg. - diff --git a/Documentation/hwmon/smm665 b/Documentation/hwmon/smm665.rst similarity index 100% rename from Documentation/hwmon/smm665 rename to Documentation/hwmon/smm665.rst diff --git a/Documentation/hwmon/smsc47b397 b/Documentation/hwmon/smsc47b397.rst similarity index 100% rename from Documentation/hwmon/smsc47b397 rename to Documentation/hwmon/smsc47b397.rst diff --git a/Documentation/hwmon/smsc47m1 b/Documentation/hwmon/smsc47m1.rst similarity index 100% rename from Documentation/hwmon/smsc47m1 rename to Documentation/hwmon/smsc47m1.rst diff --git a/Documentation/hwmon/smsc47m192 b/Documentation/hwmon/smsc47m192.rst similarity index 100% rename from Documentation/hwmon/smsc47m192 rename to Documentation/hwmon/smsc47m192.rst diff --git a/Documentation/hwmon/submitting-patches b/Documentation/hwmon/submitting-patches.rst similarity index 98% rename from Documentation/hwmon/submitting-patches rename to Documentation/hwmon/submitting-patches.rst index 12540b7d9b50..f9796b9d9db6 100644 --- a/Documentation/hwmon/submitting-patches +++ b/Documentation/hwmon/submitting-patches.rst @@ -39,7 +39,7 @@ increase the chances of your change being accepted. 2. Adding functionality to existing drivers ------------------------------------------- -* Make sure the documentation in Documentation/hwmon/ is up to +* Make sure the documentation in Documentation/hwmon/.rst is up to date. * Make sure the information in Kconfig is up to date. @@ -61,7 +61,7 @@ increase the chances of your change being accepted. * Consider adding yourself to MAINTAINERS. -* Document the driver in Documentation/hwmon/. +* Document the driver in Documentation/hwmon/.rst. * Add the driver to Kconfig and Makefile in alphabetical order. @@ -134,7 +134,7 @@ increase the chances of your change being accepted. non-standard attributes, or you believe you do, discuss it on the mailing list first. Either case, provide a detailed explanation why you need the non-standard attribute(s). - Standard attributes are specified in Documentation/hwmon/sysfs-interface. + Standard attributes are specified in Documentation/hwmon/sysfs-interface.rst. * When deciding which sysfs attributes to support, look at the chip's capabilities. While we do not expect your driver to support everything the diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface.rst similarity index 100% rename from Documentation/hwmon/sysfs-interface rename to Documentation/hwmon/sysfs-interface.rst diff --git a/Documentation/hwmon/tc654 b/Documentation/hwmon/tc654.rst similarity index 100% rename from Documentation/hwmon/tc654 rename to Documentation/hwmon/tc654.rst diff --git a/Documentation/hwmon/tc74 b/Documentation/hwmon/tc74.rst similarity index 100% rename from Documentation/hwmon/tc74 rename to Documentation/hwmon/tc74.rst diff --git a/Documentation/hwmon/thmc50 b/Documentation/hwmon/thmc50.rst similarity index 99% rename from Documentation/hwmon/thmc50 rename to Documentation/hwmon/thmc50.rst index 6dba1b59b20c..cfff3885287d 100644 --- a/Documentation/hwmon/thmc50 +++ b/Documentation/hwmon/thmc50.rst @@ -87,4 +87,3 @@ so it stops fans even if the value 0 into the ANALOG_OUT register does not. The driver was tested on Compaq AP550 with two ADM1022 chips (one works in the temp3 mode), five temperature readings and two fans. - diff --git a/Documentation/hwmon/tmp102 b/Documentation/hwmon/tmp102.rst similarity index 93% rename from Documentation/hwmon/tmp102 rename to Documentation/hwmon/tmp102.rst index 5e34821df4ab..b1f585531a88 100644 --- a/Documentation/hwmon/tmp102 +++ b/Documentation/hwmon/tmp102.rst @@ -28,4 +28,4 @@ The TMP102 has a programmable update rate that can select between 8, 4, 1, and 0.5 Hz. (Currently the driver only supports the default of 4 Hz). The driver provides the common sysfs-interface for temperatures (see -Documentation/hwmon/sysfs-interface under Temperatures). +Documentation/hwmon/sysfs-interface.rst under Temperatures). diff --git a/Documentation/hwmon/tmp103 b/Documentation/hwmon/tmp103.rst similarity index 92% rename from Documentation/hwmon/tmp103 rename to Documentation/hwmon/tmp103.rst index 7682a795e38c..15d25806d585 100644 --- a/Documentation/hwmon/tmp103 +++ b/Documentation/hwmon/tmp103.rst @@ -27,7 +27,7 @@ Resolution: 8 Bits Accuracy: ±1°C Typ (–10°C to +100°C) The driver provides the common sysfs-interface for temperatures (see -Documentation/hwmon/sysfs-interface under Temperatures). +Documentation/hwmon/sysfs-interface.rst under Temperatures). Please refer how to instantiate this driver: Documentation/i2c/instantiating-devices diff --git a/Documentation/hwmon/tmp108 b/Documentation/hwmon/tmp108.rst similarity index 95% rename from Documentation/hwmon/tmp108 rename to Documentation/hwmon/tmp108.rst index 7e08b7ef1e2f..5f4266a16cb2 100644 --- a/Documentation/hwmon/tmp108 +++ b/Documentation/hwmon/tmp108.rst @@ -38,4 +38,4 @@ and then the device is shut down automatically. (This driver only supports continuous mode.) The driver provides the common sysfs-interface for temperatures (see -Documentation/hwmon/sysfs-interface under Temperatures). +Documentation/hwmon/sysfs-interface.rst under Temperatures). diff --git a/Documentation/hwmon/tmp401 b/Documentation/hwmon/tmp401.rst similarity index 97% rename from Documentation/hwmon/tmp401 rename to Documentation/hwmon/tmp401.rst index bd865bbdb38d..6a05a0719bc7 100644 --- a/Documentation/hwmon/tmp401 +++ b/Documentation/hwmon/tmp401.rst @@ -68,7 +68,7 @@ supported by the driver so far, so using the default resolution of 0.5 degree). The driver provides the common sysfs-interface for temperatures (see -Documentation/hwmon/sysfs-interface under Temperatures). +Documentation/hwmon/sysfs-interface.rst under Temperatures). The TMP411 and TMP431 chips are compatible with TMP401. TMP411 provides some additional features. diff --git a/Documentation/hwmon/tmp421 b/Documentation/hwmon/tmp421.rst similarity index 100% rename from Documentation/hwmon/tmp421 rename to Documentation/hwmon/tmp421.rst diff --git a/Documentation/hwmon/tps40422 b/Documentation/hwmon/tps40422.rst similarity index 96% rename from Documentation/hwmon/tps40422 rename to Documentation/hwmon/tps40422.rst index 359751eb5ed4..b691e30479dd 100644 --- a/Documentation/hwmon/tps40422 +++ b/Documentation/hwmon/tps40422.rst @@ -21,7 +21,7 @@ This driver supports TI TPS40422 Dual-Output or Two-Phase Synchronous Buck Controller with PMBus The driver is a client driver to the core PMBus driver. -Please see Documentation/hwmon/pmbus for details on PMBus client drivers. +Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers. Usage Notes diff --git a/Documentation/hwmon/twl4030-madc-hwmon b/Documentation/hwmon/twl4030-madc-hwmon.rst similarity index 100% rename from Documentation/hwmon/twl4030-madc-hwmon rename to Documentation/hwmon/twl4030-madc-hwmon.rst diff --git a/Documentation/hwmon/ucd9000 b/Documentation/hwmon/ucd9000.rst similarity index 97% rename from Documentation/hwmon/ucd9000 rename to Documentation/hwmon/ucd9000.rst index d69061b7312c..ebc4f2b3bfea 100644 --- a/Documentation/hwmon/ucd9000 +++ b/Documentation/hwmon/ucd9000.rst @@ -57,7 +57,7 @@ system-health monitor. The device integrates a 12-bit ADC for monitoring up to 13 power-supply voltage, current, or temperature inputs. This driver is a client driver to the core PMBus driver. Please see -Documentation/hwmon/pmbus for details on PMBus client drivers. +Documentation/hwmon/pmbus.rst for details on PMBus client drivers. Usage Notes @@ -72,7 +72,7 @@ Platform data support --------------------- The driver supports standard PMBus driver platform data. Please see -Documentation/hwmon/pmbus for details. +Documentation/hwmon/pmbus.rst for details. Sysfs entries diff --git a/Documentation/hwmon/ucd9200 b/Documentation/hwmon/ucd9200.rst similarity index 97% rename from Documentation/hwmon/ucd9200 rename to Documentation/hwmon/ucd9200.rst index 44eda4a579b6..b819dfd75f71 100644 --- a/Documentation/hwmon/ucd9200 +++ b/Documentation/hwmon/ucd9200.rst @@ -33,7 +33,7 @@ dedicated circuitry for DC/DC loop management with flash memory and a serial interface to support configuration, monitoring and management. This driver is a client driver to the core PMBus driver. Please see -Documentation/hwmon/pmbus for details on PMBus client drivers. +Documentation/hwmon/pmbus.rst for details on PMBus client drivers. Usage Notes @@ -48,7 +48,7 @@ Platform data support --------------------- The driver supports standard PMBus driver platform data. Please see -Documentation/hwmon/pmbus for details. +Documentation/hwmon/pmbus.rst for details. Sysfs entries diff --git a/Documentation/hwmon/userspace-tools b/Documentation/hwmon/userspace-tools.rst similarity index 100% rename from Documentation/hwmon/userspace-tools rename to Documentation/hwmon/userspace-tools.rst diff --git a/Documentation/hwmon/vexpress b/Documentation/hwmon/vexpress.rst similarity index 100% rename from Documentation/hwmon/vexpress rename to Documentation/hwmon/vexpress.rst diff --git a/Documentation/hwmon/via686a b/Documentation/hwmon/via686a.rst similarity index 100% rename from Documentation/hwmon/via686a rename to Documentation/hwmon/via686a.rst diff --git a/Documentation/hwmon/vt1211 b/Documentation/hwmon/vt1211.rst similarity index 100% rename from Documentation/hwmon/vt1211 rename to Documentation/hwmon/vt1211.rst diff --git a/Documentation/hwmon/w83627ehf b/Documentation/hwmon/w83627ehf.rst similarity index 100% rename from Documentation/hwmon/w83627ehf rename to Documentation/hwmon/w83627ehf.rst diff --git a/Documentation/hwmon/w83627hf b/Documentation/hwmon/w83627hf.rst similarity index 100% rename from Documentation/hwmon/w83627hf rename to Documentation/hwmon/w83627hf.rst diff --git a/Documentation/hwmon/w83773g b/Documentation/hwmon/w83773g.rst similarity index 100% rename from Documentation/hwmon/w83773g rename to Documentation/hwmon/w83773g.rst diff --git a/Documentation/hwmon/w83781d b/Documentation/hwmon/w83781d.rst similarity index 100% rename from Documentation/hwmon/w83781d rename to Documentation/hwmon/w83781d.rst diff --git a/Documentation/hwmon/w83791d b/Documentation/hwmon/w83791d.rst similarity index 99% rename from Documentation/hwmon/w83791d rename to Documentation/hwmon/w83791d.rst index a91f9e5fb0c6..3adaed39b157 100644 --- a/Documentation/hwmon/w83791d +++ b/Documentation/hwmon/w83791d.rst @@ -102,7 +102,7 @@ This file is used for both legacy and new code. The sysfs interface to the beep bitmask has migrated from the original legacy method of a single sysfs beep_mask file to a newer method using multiple -`*_beep` files as described in `Documentation/hwmon/sysfs-interface`. +`*_beep` files as described in `Documentation/hwmon/sysfs-interface.rst`. A similar change has occurred for the bitmap corresponding to the alarms. The original legacy method used a single sysfs alarms file containing a bitmap diff --git a/Documentation/hwmon/w83792d b/Documentation/hwmon/w83792d.rst similarity index 100% rename from Documentation/hwmon/w83792d rename to Documentation/hwmon/w83792d.rst diff --git a/Documentation/hwmon/w83793 b/Documentation/hwmon/w83793.rst similarity index 100% rename from Documentation/hwmon/w83793 rename to Documentation/hwmon/w83793.rst diff --git a/Documentation/hwmon/w83795 b/Documentation/hwmon/w83795.rst similarity index 100% rename from Documentation/hwmon/w83795 rename to Documentation/hwmon/w83795.rst diff --git a/Documentation/hwmon/w83l785ts b/Documentation/hwmon/w83l785ts.rst similarity index 100% rename from Documentation/hwmon/w83l785ts rename to Documentation/hwmon/w83l785ts.rst diff --git a/Documentation/hwmon/w83l786ng b/Documentation/hwmon/w83l786ng.rst similarity index 100% rename from Documentation/hwmon/w83l786ng rename to Documentation/hwmon/w83l786ng.rst diff --git a/Documentation/hwmon/wm831x b/Documentation/hwmon/wm831x.rst similarity index 100% rename from Documentation/hwmon/wm831x rename to Documentation/hwmon/wm831x.rst diff --git a/Documentation/hwmon/wm8350 b/Documentation/hwmon/wm8350.rst similarity index 100% rename from Documentation/hwmon/wm8350 rename to Documentation/hwmon/wm8350.rst diff --git a/Documentation/hwmon/xgene-hwmon b/Documentation/hwmon/xgene-hwmon.rst similarity index 100% rename from Documentation/hwmon/xgene-hwmon rename to Documentation/hwmon/xgene-hwmon.rst diff --git a/Documentation/hwmon/zl6100 b/Documentation/hwmon/zl6100.rst similarity index 98% rename from Documentation/hwmon/zl6100 rename to Documentation/hwmon/zl6100.rst index 4029970bace4..41513bb7fe51 100644 --- a/Documentation/hwmon/zl6100 +++ b/Documentation/hwmon/zl6100.rst @@ -113,7 +113,7 @@ This driver supports hardware monitoring for Intersil / Zilker Labs ZL6100 and compatible digital DC-DC controllers. The driver is a client driver to the core PMBus driver. Please see -Documentation/hwmon/pmbus and Documentation.hwmon/pmbus-core for details +Documentation/hwmon/pmbus.rst and Documentation.hwmon/pmbus-core for details on PMBus client drivers. diff --git a/Documentation/index.rst b/Documentation/index.rst index 80a421cb935e..3a710dc24fc8 100644 --- a/Documentation/index.rst +++ b/Documentation/index.rst @@ -83,6 +83,7 @@ needed). media/index networking/index input/index + hwmon/index gpu/index security/index sound/index diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index 911399730c1c..c3fa500df92c 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -316,7 +316,7 @@ ACPI thermal zones. |---temp[1-*]_input: The current temperature of thermal zone [1-*] |---temp[1-*]_critical: The critical trip point of thermal zone [1-*] -Please read Documentation/hwmon/sysfs-interface for additional information. +Please read Documentation/hwmon/sysfs-interface.rst for additional information. *************************** * Thermal zone attributes * diff --git a/MAINTAINERS b/MAINTAINERS index cfd9884256af..317cc9933826 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -468,7 +468,7 @@ ADM1025 HARDWARE MONITOR DRIVER M: Jean Delvare L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/adm1025 +F: Documentation/hwmon/adm1025.rst F: drivers/hwmon/adm1025.c ADM1029 HARDWARE MONITOR DRIVER @@ -520,7 +520,7 @@ ADS1015 HARDWARE MONITOR DRIVER M: Dirk Eibach L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/ads1015 +F: Documentation/hwmon/ads1015.rst F: drivers/hwmon/ads1015.c F: include/linux/platform_data/ads1015.h @@ -533,7 +533,7 @@ ADT7475 HARDWARE MONITOR DRIVER M: Jean Delvare L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/adt7475 +F: Documentation/hwmon/adt7475.rst F: drivers/hwmon/adt7475.c ADVANSYS SCSI DRIVER @@ -764,7 +764,7 @@ AMD FAM15H PROCESSOR POWER MONITORING DRIVER M: Huang Rui L: linux-hwmon@vger.kernel.org S: Supported -F: Documentation/hwmon/fam15h_power +F: Documentation/hwmon/fam15h_power.rst F: drivers/hwmon/fam15h_power.c AMD FCH GPIO DRIVER @@ -2513,7 +2513,7 @@ ASC7621 HARDWARE MONITOR DRIVER M: George Joseph L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/asc7621 +F: Documentation/hwmon/asc7621.rst F: drivers/hwmon/asc7621.c ASPEED VIDEO ENGINE DRIVER @@ -4047,7 +4047,7 @@ CORETEMP HARDWARE MONITORING DRIVER M: Fenghua Yu L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/coretemp +F: Documentation/hwmon/coretemp.rst F: drivers/hwmon/coretemp.c COSA/SRP SYNC SERIAL DRIVER @@ -4602,7 +4602,7 @@ DIALOG SEMICONDUCTOR DRIVERS M: Support Opensource W: http://www.dialog-semiconductor.com/products S: Supported -F: Documentation/hwmon/da90?? +F: Documentation/hwmon/da90??.rst F: Documentation/devicetree/bindings/mfd/da90*.txt F: Documentation/devicetree/bindings/input/da90??-onkey.txt F: Documentation/devicetree/bindings/thermal/da90??-thermal.txt @@ -4753,7 +4753,7 @@ DME1737 HARDWARE MONITOR DRIVER M: Juerg Haefliger L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/dme1737 +F: Documentation/hwmon/dme1737.rst F: drivers/hwmon/dme1737.c DMI/SMBIOS SUPPORT @@ -5939,7 +5939,7 @@ F71805F HARDWARE MONITORING DRIVER M: Jean Delvare L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/f71805f +F: Documentation/hwmon/f71805f.rst F: drivers/hwmon/f71805f.c FADDR2LINE @@ -7621,7 +7621,7 @@ INA209 HARDWARE MONITOR DRIVER M: Guenter Roeck L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/ina209 +F: Documentation/hwmon/ina209.rst F: Documentation/devicetree/bindings/hwmon/ina2xx.txt F: drivers/hwmon/ina209.c @@ -7629,7 +7629,7 @@ INA2XX HARDWARE MONITOR DRIVER M: Guenter Roeck L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/ina2xx +F: Documentation/hwmon/ina2xx.rst F: drivers/hwmon/ina2xx.c F: include/linux/platform_data/ina2xx.h @@ -8257,7 +8257,7 @@ IT87 HARDWARE MONITORING DRIVER M: Jean Delvare L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/it87 +F: Documentation/hwmon/it87.rst F: drivers/hwmon/it87.c IT913X MEDIA DRIVER @@ -8301,7 +8301,7 @@ M: Guenter Roeck L: linux-hwmon@vger.kernel.org S: Maintained F: drivers/hwmon/jc42.c -F: Documentation/hwmon/jc42 +F: Documentation/hwmon/jc42.rst JFS FILESYSTEM M: Dave Kleikamp @@ -8349,14 +8349,14 @@ K10TEMP HARDWARE MONITORING DRIVER M: Clemens Ladisch L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/k10temp +F: Documentation/hwmon/k10temp.rst F: drivers/hwmon/k10temp.c K8TEMP HARDWARE MONITORING DRIVER M: Rudolf Marek L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/k8temp +F: Documentation/hwmon/k8temp.rst F: drivers/hwmon/k8temp.c KASAN @@ -9047,21 +9047,21 @@ LM78 HARDWARE MONITOR DRIVER M: Jean Delvare L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/lm78 +F: Documentation/hwmon/lm78.rst F: drivers/hwmon/lm78.c LM83 HARDWARE MONITOR DRIVER M: Jean Delvare L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/lm83 +F: Documentation/hwmon/lm83.rst F: drivers/hwmon/lm83.c LM90 HARDWARE MONITOR DRIVER M: Jean Delvare L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/lm90 +F: Documentation/hwmon/lm90.rst F: Documentation/devicetree/bindings/hwmon/lm90.txt F: drivers/hwmon/lm90.c F: include/dt-bindings/thermal/lm90.h @@ -9070,7 +9070,7 @@ LM95234 HARDWARE MONITOR DRIVER M: Guenter Roeck L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/lm95234 +F: Documentation/hwmon/lm95234.rst F: drivers/hwmon/lm95234.c LME2510 MEDIA DRIVER @@ -9144,7 +9144,7 @@ LTC4261 HARDWARE MONITOR DRIVER M: Guenter Roeck L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/ltc4261 +F: Documentation/hwmon/ltc4261.rst F: drivers/hwmon/ltc4261.c LTC4306 I2C MULTIPLEXER DRIVER @@ -9375,7 +9375,7 @@ MAX16065 HARDWARE MONITOR DRIVER M: Guenter Roeck L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/max16065 +F: Documentation/hwmon/max16065.rst F: drivers/hwmon/max16065.c MAX2175 SDR TUNER DRIVER @@ -9391,14 +9391,14 @@ F: include/uapi/linux/max2175.h MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER L: linux-hwmon@vger.kernel.org S: Orphan -F: Documentation/hwmon/max6650 +F: Documentation/hwmon/max6650.rst F: drivers/hwmon/max6650.c MAX6697 HARDWARE MONITOR DRIVER M: Guenter Roeck L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/max6697 +F: Documentation/hwmon/max6697.rst F: Documentation/devicetree/bindings/hwmon/max6697.txt F: drivers/hwmon/max6697.c F: include/linux/platform_data/max6697.h @@ -10044,7 +10044,7 @@ F: drivers/mfd/menf21bmc.c F: drivers/watchdog/menf21bmc_wdt.c F: drivers/leds/leds-menf21bmc.c F: drivers/hwmon/menf21bmc_hwmon.c -F: Documentation/hwmon/menf21bmc +F: Documentation/hwmon/menf21bmc.rst MEN Z069 WATCHDOG DRIVER M: Johannes Thumshirn @@ -10672,7 +10672,7 @@ NCT6775 HARDWARE MONITOR DRIVER M: Guenter Roeck L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/nct6775 +F: Documentation/hwmon/nct6775.rst F: drivers/hwmon/nct6775.c NET_FAILOVER MODULE @@ -11766,7 +11766,7 @@ PC87360 HARDWARE MONITORING DRIVER M: Jim Cromie L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/pc87360 +F: Documentation/hwmon/pc87360.rst F: drivers/hwmon/pc87360.c PC8736x GPIO DRIVER @@ -11778,7 +11778,7 @@ PC87427 HARDWARE MONITORING DRIVER M: Jean Delvare L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/pc87427 +F: Documentation/hwmon/pc87427.rst F: drivers/hwmon/pc87427.c PCA9532 LED DRIVER @@ -12346,23 +12346,23 @@ S: Maintained F: Documentation/devicetree/bindings/hwmon/ibm,cffps1.txt F: Documentation/devicetree/bindings/hwmon/max31785.txt F: Documentation/devicetree/bindings/hwmon/ltc2978.txt -F: Documentation/hwmon/adm1275 -F: Documentation/hwmon/ibm-cffps -F: Documentation/hwmon/ir35221 -F: Documentation/hwmon/lm25066 -F: Documentation/hwmon/ltc2978 -F: Documentation/hwmon/ltc3815 -F: Documentation/hwmon/max16064 -F: Documentation/hwmon/max20751 -F: Documentation/hwmon/max31785 -F: Documentation/hwmon/max34440 -F: Documentation/hwmon/max8688 -F: Documentation/hwmon/pmbus -F: Documentation/hwmon/pmbus-core -F: Documentation/hwmon/tps40422 -F: Documentation/hwmon/ucd9000 -F: Documentation/hwmon/ucd9200 -F: Documentation/hwmon/zl6100 +F: Documentation/hwmon/adm1275.rst +F: Documentation/hwmon/ibm-cffps.rst +F: Documentation/hwmon/ir35221.rst +F: Documentation/hwmon/lm25066.rst +F: Documentation/hwmon/ltc2978.rst +F: Documentation/hwmon/ltc3815.rst +F: Documentation/hwmon/max16064.rst +F: Documentation/hwmon/max20751.rst +F: Documentation/hwmon/max31785.rst +F: Documentation/hwmon/max34440.rst +F: Documentation/hwmon/max8688.rst +F: Documentation/hwmon/pmbus.rst +F: Documentation/hwmon/pmbus-core.rst +F: Documentation/hwmon/tps40422.rst +F: Documentation/hwmon/ucd9000.rst +F: Documentation/hwmon/ucd9200.rst +F: Documentation/hwmon/zl6100.rst F: drivers/hwmon/pmbus/ F: include/linux/pmbus.h @@ -12626,7 +12626,7 @@ M: Bartlomiej Zolnierkiewicz L: linux-hwmon@vger.kernel.org S: Supported F: Documentation/devicetree/bindings/hwmon/pwm-fan.txt -F: Documentation/hwmon/pwm-fan +F: Documentation/hwmon/pwm-fan.rst F: drivers/hwmon/pwm-fan.c PWM IR Transmitter @@ -14291,21 +14291,21 @@ SMM665 HARDWARE MONITOR DRIVER M: Guenter Roeck L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/smm665 +F: Documentation/hwmon/smm665.rst F: drivers/hwmon/smm665.c SMSC EMC2103 HARDWARE MONITOR DRIVER M: Steve Glendinning L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/emc2103 +F: Documentation/hwmon/emc2103.rst F: drivers/hwmon/emc2103.c SMSC SCH5627 HARDWARE MONITOR DRIVER M: Hans de Goede L: linux-hwmon@vger.kernel.org S: Supported -F: Documentation/hwmon/sch5627 +F: Documentation/hwmon/sch5627.rst F: drivers/hwmon/sch5627.c SMSC UFX6000 and UFX7000 USB to VGA DRIVER @@ -14318,7 +14318,7 @@ SMSC47B397 HARDWARE MONITOR DRIVER M: Jean Delvare L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/smsc47b397 +F: Documentation/hwmon/smsc47b397.rst F: drivers/hwmon/smsc47b397.c SMSC911x ETHERNET DRIVER @@ -15664,7 +15664,7 @@ TMP401 HARDWARE MONITOR DRIVER M: Guenter Roeck L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/tmp401 +F: Documentation/hwmon/tmp401.rst F: drivers/hwmon/tmp401.c TMPFS (SHMEM FILESYSTEM) @@ -16689,7 +16689,7 @@ VT1211 HARDWARE MONITOR DRIVER M: Juerg Haefliger L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/vt1211 +F: Documentation/hwmon/vt1211.rst F: drivers/hwmon/vt1211.c VT8231 HARDWARE MONITOR DRIVER @@ -16717,14 +16717,14 @@ W83791D HARDWARE MONITORING DRIVER M: Marc Hulsman L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/w83791d +F: Documentation/hwmon/w83791d.rst F: drivers/hwmon/w83791d.c W83793 HARDWARE MONITORING DRIVER M: Rudolf Marek L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/w83793 +F: Documentation/hwmon/w83793.rst F: drivers/hwmon/w83793.c W83795 HARDWARE MONITORING DRIVER @@ -16833,7 +16833,7 @@ L: patches@opensource.cirrus.com T: git https://github.com/CirrusLogic/linux-drivers.git W: https://github.com/CirrusLogic/linux-drivers/wiki S: Supported -F: Documentation/hwmon/wm83?? +F: Documentation/hwmon/wm83??.rst F: Documentation/devicetree/bindings/extcon/extcon-arizona.txt F: Documentation/devicetree/bindings/regulator/arizona-regulator.txt F: Documentation/devicetree/bindings/mfd/arizona.txt diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index dedd5febd3aa..470ba66b18b0 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -17,7 +17,7 @@ menuconfig HWMON To find out which specific driver(s) you need, use the sensors-detect script from the lm_sensors package. Read - for details. + for details. This support can also be built as a module. If so, the module will be called hwmon. @@ -59,7 +59,7 @@ config SENSORS_ABITUGURU chip can be found on Abit uGuru featuring motherboards (most modern Abit motherboards from before end 2005). For more info and a list of which motherboards have which revision see - Documentation/hwmon/abituguru + Documentation/hwmon/abituguru.rst This driver can also be built as a module. If so, the module will be called abituguru. @@ -73,7 +73,7 @@ config SENSORS_ABITUGURU3 and their settings is supported. The third revision of the Abit uGuru chip can be found on recent Abit motherboards (since end 2005). For more info and a list of which motherboards have which - revision see Documentation/hwmon/abituguru3 + revision see Documentation/hwmon/abituguru3.rst This driver can also be built as a module. If so, the module will be called abituguru3. @@ -643,7 +643,7 @@ config SENSORS_CORETEMP help If you say yes here you get support for the temperature sensor inside your CPU. Most of the family 6 CPUs - are supported. Check Documentation/hwmon/coretemp for details. + are supported. Check Documentation/hwmon/coretemp.rst for details. config SENSORS_IT87 tristate "ITE IT87xx and compatibles" diff --git a/drivers/hwmon/ads7828.c b/drivers/hwmon/ads7828.c index e6be617e3fb2..03d6e782777a 100644 --- a/drivers/hwmon/ads7828.c +++ b/drivers/hwmon/ads7828.c @@ -8,7 +8,7 @@ * * ADS7830 support, by Guillaume Roguez * - * For further information, see the Documentation/hwmon/ads7828 file. + * For further information, see the Documentation/hwmon/ads7828.rst file. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/hwmon/max197.c b/drivers/hwmon/max197.c index 3d9e210beedf..dd6a35219a18 100644 --- a/drivers/hwmon/max197.c +++ b/drivers/hwmon/max197.c @@ -8,7 +8,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * For further information, see the Documentation/hwmon/max197 file. + * For further information, see the Documentation/hwmon/max197.rst file. */ #include diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c index 39b41e35c2bf..7f4a63959730 100644 --- a/drivers/hwmon/sht15.c +++ b/drivers/hwmon/sht15.c @@ -10,7 +10,7 @@ * * Copyright (c) 2007 Wouter Horre * - * For further information, see the Documentation/hwmon/sht15 file. + * For further information, see the Documentation/hwmon/sht15.rst file. */ #include diff --git a/include/linux/platform_data/ads7828.h b/include/linux/platform_data/ads7828.h index 3245f45f9d77..a3370a007702 100644 --- a/include/linux/platform_data/ads7828.h +++ b/include/linux/platform_data/ads7828.h @@ -4,7 +4,7 @@ * Copyright (c) 2012 Savoir-faire Linux Inc. * Vivien Didelot * - * For further information, see the Documentation/hwmon/ads7828 file. + * For further information, see the Documentation/hwmon/ads7828.rst file. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/include/linux/platform_data/ds620.h b/include/linux/platform_data/ds620.h index 6ef58bb77e46..f0ce22a78bb8 100644 --- a/include/linux/platform_data/ds620.h +++ b/include/linux/platform_data/ds620.h @@ -14,7 +14,7 @@ struct ds620_platform_data { * 1 = PO_LOW * 2 = PO_HIGH * - * (see Documentation/hwmon/ds620) + * (see Documentation/hwmon/ds620.rst) */ int pomode; }; diff --git a/include/linux/platform_data/ina2xx.h b/include/linux/platform_data/ina2xx.h index 9f0aa1b48c78..dde59fd3590f 100644 --- a/include/linux/platform_data/ina2xx.h +++ b/include/linux/platform_data/ina2xx.h @@ -7,7 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * For further information, see the Documentation/hwmon/ina2xx file. + * For further information, see the Documentation/hwmon/ina2xx.rst file. */ /** diff --git a/include/linux/platform_data/max197.h b/include/linux/platform_data/max197.h index 8da8f94ee15c..2bbd0919bc89 100644 --- a/include/linux/platform_data/max197.h +++ b/include/linux/platform_data/max197.h @@ -8,7 +8,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * For further information, see the Documentation/hwmon/max197 file. + * For further information, see the Documentation/hwmon/max197.rst file. */ #ifndef _PDATA_MAX197_H diff --git a/include/linux/platform_data/ntc_thermistor.h b/include/linux/platform_data/ntc_thermistor.h index ee03d429742b..5fa115d3ea4b 100644 --- a/include/linux/platform_data/ntc_thermistor.h +++ b/include/linux/platform_data/ntc_thermistor.h @@ -42,7 +42,7 @@ struct ntc_thermistor_platform_data { * read_uV() * * How to setup pullup_ohm, pulldown_ohm, and connect is - * described at Documentation/hwmon/ntc_thermistor + * described at Documentation/hwmon/ntc_thermistor.rst * * pullup/down_ohm: 0 for infinite / not-connected * From 521c0b6116ef60e4b96ba42dbf285b2ad69071d4 Mon Sep 17 00:00:00 2001 From: Nicolin Chen Date: Wed, 17 Apr 2019 16:12:09 -0700 Subject: [PATCH 117/125] hwmon: (ina3221) Do not read-back to cache reg_config Reading back the CONFIG register increases an extra I2C transaction. This's not necessary and could be replaced with a local variable caching the register settings. So this patch replaces two readback regmap_read() calls with a tmp variable. Signed-off-by: Nicolin Chen Signed-off-by: Guenter Roeck --- drivers/hwmon/ina3221.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/drivers/hwmon/ina3221.c b/drivers/hwmon/ina3221.c index 74d39d212931..62040aac653c 100644 --- a/drivers/hwmon/ina3221.c +++ b/drivers/hwmon/ina3221.c @@ -309,21 +309,22 @@ static int ina3221_write_chip(struct device *dev, u32 attr, long val) { struct ina3221_data *ina = dev_get_drvdata(dev); int ret, idx; + u32 tmp; switch (attr) { case hwmon_chip_samples: idx = find_closest(val, ina3221_avg_samples, ARRAY_SIZE(ina3221_avg_samples)); - ret = regmap_update_bits(ina->regmap, INA3221_CONFIG, - INA3221_CONFIG_AVG_MASK, - idx << INA3221_CONFIG_AVG_SHIFT); + tmp = (ina->reg_config & ~INA3221_CONFIG_AVG_MASK) | + (idx << INA3221_CONFIG_AVG_SHIFT); + ret = regmap_write(ina->regmap, INA3221_CONFIG, tmp); if (ret) return ret; /* Update reg_config accordingly */ - return regmap_read(ina->regmap, INA3221_CONFIG, - &ina->reg_config); + ina->reg_config = tmp; + return 0; default: return -EOPNOTSUPP; } @@ -359,6 +360,7 @@ static int ina3221_write_enable(struct device *dev, int channel, bool enable) struct ina3221_data *ina = dev_get_drvdata(dev); u16 config, mask = INA3221_CONFIG_CHx_EN(channel); u16 config_old = ina->reg_config & mask; + u32 tmp; int ret; config = enable ? mask : 0; @@ -377,14 +379,13 @@ static int ina3221_write_enable(struct device *dev, int channel, bool enable) } /* Enable or disable the channel */ - ret = regmap_update_bits(ina->regmap, INA3221_CONFIG, mask, config); + tmp = (ina->reg_config & ~mask) | (config & mask); + ret = regmap_write(ina->regmap, INA3221_CONFIG, tmp); if (ret) goto fail; /* Cache the latest config register value */ - ret = regmap_read(ina->regmap, INA3221_CONFIG, &ina->reg_config); - if (ret) - goto fail; + ina->reg_config = tmp; /* For disabling routine, decrease refcount or suspend() at last */ if (!enable) From 023912dbb80f5faf7a028aad6562774472d82a5a Mon Sep 17 00:00:00 2001 From: Nicolin Chen Date: Wed, 17 Apr 2019 16:12:10 -0700 Subject: [PATCH 118/125] hwmon: (ina3221) Add voltage conversion time settings The CONFIG register has two 3-bit fields for conversion time settings of Bus-voltage and Shunt-voltage, respectively. The conversion settings, along with averaging mode, allow users to optimize available timing requirement. This patch adds an 'update_interval' sysfs node through the hwmon_chip_info of hwmon core. It reflects a total hardware conversion time: samples * channels * (Bus + Shunt conversion times) Though INA3221 supports different conversion time setups for Bus and Shunt voltages, this patch only adds the support of a unified setting for both conversion times, by dividing the conversion time into two equal values. Signed-off-by: Nicolin Chen [groeck: .rst related formatting changes in documentation] Signed-off-by: Guenter Roeck --- Documentation/hwmon/ina3221.rst | 13 ++++++++ drivers/hwmon/ina3221.c | 58 ++++++++++++++++++++++++++++----- 2 files changed, 63 insertions(+), 8 deletions(-) diff --git a/Documentation/hwmon/ina3221.rst b/Documentation/hwmon/ina3221.rst index 1e34abb38b59..f6007ae8f4e2 100644 --- a/Documentation/hwmon/ina3221.rst +++ b/Documentation/hwmon/ina3221.rst @@ -46,4 +46,17 @@ samples Number of samples using in the averaging mode. Supports the list of number of samples: 1, 4, 16, 64, 128, 256, 512, 1024 + +update_interval Data conversion time in millisecond, following: + + update_interval = C x S x (BC + SC) + + * C: number of enabled channels + * S: number of samples + * BC: bus-voltage conversion time in millisecond + * SC: shunt-voltage conversion time in millisecond + + Affects both Bus- and Shunt-voltage conversion time. + Note that setting update_interval to 0ms sets both BC + and SC to 140 us (minimum conversion time). ======================= ======================================================= diff --git a/drivers/hwmon/ina3221.c b/drivers/hwmon/ina3221.c index 62040aac653c..e0637fed9585 100644 --- a/drivers/hwmon/ina3221.c +++ b/drivers/hwmon/ina3221.c @@ -144,19 +144,37 @@ static const int ina3221_avg_samples[] = { 1, 4, 16, 64, 128, 256, 512, 1024, }; -static inline int ina3221_wait_for_data(struct ina3221_data *ina) +/* Converting update_interval in msec to conversion time in usec */ +static inline u32 ina3221_interval_ms_to_conv_time(u16 config, int interval) { - u32 channels = hweight16(ina->reg_config & INA3221_CONFIG_CHs_EN_MASK); - u32 vbus_ct_idx = INA3221_CONFIG_VBUS_CT(ina->reg_config); - u32 vsh_ct_idx = INA3221_CONFIG_VSH_CT(ina->reg_config); - u32 samples_idx = INA3221_CONFIG_AVG(ina->reg_config); + u32 channels = hweight16(config & INA3221_CONFIG_CHs_EN_MASK); + u32 samples_idx = INA3221_CONFIG_AVG(config); + u32 samples = ina3221_avg_samples[samples_idx]; + + /* Bisect the result to Bus and Shunt conversion times */ + return DIV_ROUND_CLOSEST(interval * 1000 / 2, channels * samples); +} + +/* Converting CONFIG register value to update_interval in usec */ +static inline u32 ina3221_reg_to_interval_us(u16 config) +{ + u32 channels = hweight16(config & INA3221_CONFIG_CHs_EN_MASK); + u32 vbus_ct_idx = INA3221_CONFIG_VBUS_CT(config); + u32 vsh_ct_idx = INA3221_CONFIG_VSH_CT(config); + u32 samples_idx = INA3221_CONFIG_AVG(config); u32 samples = ina3221_avg_samples[samples_idx]; u32 vbus_ct = ina3221_conv_time[vbus_ct_idx]; u32 vsh_ct = ina3221_conv_time[vsh_ct_idx]; - u32 wait, cvrf; /* Calculate total conversion time */ - wait = channels * (vbus_ct + vsh_ct) * samples; + return channels * (vbus_ct + vsh_ct) * samples; +} + +static inline int ina3221_wait_for_data(struct ina3221_data *ina) +{ + u32 wait, cvrf; + + wait = ina3221_reg_to_interval_us(ina->reg_config); /* Polling the CVRF bit to make sure read data is ready */ return regmap_field_read_poll_timeout(ina->fields[F_CVRF], @@ -197,6 +215,11 @@ static int ina3221_read_chip(struct device *dev, u32 attr, long *val) regval = INA3221_CONFIG_AVG(ina->reg_config); *val = ina3221_avg_samples[regval]; return 0; + case hwmon_chip_update_interval: + /* Return in msec */ + *val = ina3221_reg_to_interval_us(ina->reg_config); + *val = DIV_ROUND_CLOSEST(*val, 1000); + return 0; default: return -EOPNOTSUPP; } @@ -322,6 +345,23 @@ static int ina3221_write_chip(struct device *dev, u32 attr, long val) if (ret) return ret; + /* Update reg_config accordingly */ + ina->reg_config = tmp; + return 0; + case hwmon_chip_update_interval: + tmp = ina3221_interval_ms_to_conv_time(ina->reg_config, val); + idx = find_closest(tmp, ina3221_conv_time, + ARRAY_SIZE(ina3221_conv_time)); + + /* Update Bus and Shunt voltage conversion times */ + tmp = INA3221_CONFIG_VBUS_CT_MASK | INA3221_CONFIG_VSH_CT_MASK; + tmp = (ina->reg_config & ~tmp) | + (idx << INA3221_CONFIG_VBUS_CT_SHIFT) | + (idx << INA3221_CONFIG_VSH_CT_SHIFT); + ret = regmap_write(ina->regmap, INA3221_CONFIG, tmp); + if (ret) + return ret; + /* Update reg_config accordingly */ ina->reg_config = tmp; return 0; @@ -483,6 +523,7 @@ static umode_t ina3221_is_visible(const void *drvdata, case hwmon_chip: switch (attr) { case hwmon_chip_samples: + case hwmon_chip_update_interval: return 0644; default: return 0; @@ -528,7 +569,8 @@ static umode_t ina3221_is_visible(const void *drvdata, static const struct hwmon_channel_info *ina3221_info[] = { HWMON_CHANNEL_INFO(chip, - HWMON_C_SAMPLES), + HWMON_C_SAMPLES, + HWMON_C_UPDATE_INTERVAL), HWMON_CHANNEL_INFO(in, /* 0: dummy, skipped in is_visible */ HWMON_I_INPUT, From 4f8d374b770a2e26088186d6c18acf582227129d Mon Sep 17 00:00:00 2001 From: Jean-Francois Dagenais Date: Thu, 18 Apr 2019 20:57:22 -0400 Subject: [PATCH 119/125] hwmon: (max6650) add thermal cooling device capability This allows max6650 devices to be referenced in dts as a cooling device. The pwm value seems duplicated in cooling_dev_state but since pwm goes through rounding logic into data->dac, it is modified and messes with the thermal zone state algorithms. It's also better to serve a cache value, thus avoiding periodic actual i2c traffic. Signed-off-by: Jean-Francois Dagenais Signed-off-by: Guenter Roeck --- drivers/hwmon/Kconfig | 1 + drivers/hwmon/max6650.c | 90 ++++++++++++++++++++++++++++++++++++++++- 2 files changed, 90 insertions(+), 1 deletion(-) diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 470ba66b18b0..1915a18b537b 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -908,6 +908,7 @@ config SENSORS_MAX6642 config SENSORS_MAX6650 tristate "Maxim MAX6650 sensor chip" depends on I2C + depends on THERMAL || THERMAL=n help If you say yes here you get support for the MAX6650 / MAX6651 sensor chips. diff --git a/drivers/hwmon/max6650.c b/drivers/hwmon/max6650.c index 95b234631e55..e977c2f2d74a 100644 --- a/drivers/hwmon/max6650.c +++ b/drivers/hwmon/max6650.c @@ -40,6 +40,7 @@ #include #include #include +#include /* * Insmod parameters @@ -113,6 +114,7 @@ module_param(clock, int, 0444); struct max6650_data { struct i2c_client *client; const struct attribute_group *groups[3]; + struct thermal_cooling_device *cooling_dev; struct mutex update_lock; int nr_fans; char valid; /* zero until following fields are valid */ @@ -125,6 +127,7 @@ struct max6650_data { u8 count; u8 dac; u8 alarm; + unsigned long cooling_dev_state; }; static const u8 tach_reg[] = { @@ -694,6 +697,63 @@ static int max6650_init_client(struct max6650_data *data, return 0; } +#if IS_ENABLED(CONFIG_THERMAL) + +static int max6650_get_max_state(struct thermal_cooling_device *cdev, + unsigned long *state) +{ + *state = 255; + + return 0; +} + +static int max6650_get_cur_state(struct thermal_cooling_device *cdev, + unsigned long *state) +{ + struct max6650_data *data = cdev->devdata; + + *state = data->cooling_dev_state; + + return 0; +} + +static int max6650_set_cur_state(struct thermal_cooling_device *cdev, + unsigned long state) +{ + struct max6650_data *data = cdev->devdata; + struct i2c_client *client = data->client; + int err; + + state = clamp_val(state, 0, 255); + + mutex_lock(&data->update_lock); + + if (data->config & MAX6650_CFG_V12) + data->dac = 180 - (180 * state)/255; + else + data->dac = 76 - (76 * state)/255; + + err = i2c_smbus_write_byte_data(client, MAX6650_REG_DAC, data->dac); + + if (!err) { + max6650_set_operating_mode(data, state ? + MAX6650_CFG_MODE_OPEN_LOOP : + MAX6650_CFG_MODE_OFF); + data->cooling_dev_state = state; + } + + mutex_unlock(&data->update_lock); + + return err < 0 ? err : 0; +} + +static const struct thermal_cooling_device_ops max6650_cooling_ops = { + .get_max_state = max6650_get_max_state, + .get_cur_state = max6650_get_cur_state, + .set_cur_state = max6650_set_cur_state, +}; +#endif + static int max6650_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -709,6 +769,7 @@ static int max6650_probe(struct i2c_client *client, return -ENOMEM; data->client = client; + i2c_set_clientdata(client, data); mutex_init(&data->update_lock); data->nr_fans = of_id ? (int)(uintptr_t)of_id->data : id->driver_data; @@ -727,7 +788,33 @@ static int max6650_probe(struct i2c_client *client, hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, data, data->groups); - return PTR_ERR_OR_ZERO(hwmon_dev); + err = PTR_ERR_OR_ZERO(hwmon_dev); + if (err) + return err; + +#if IS_ENABLED(CONFIG_THERMAL) + data->cooling_dev = + thermal_of_cooling_device_register(client->dev.of_node, + client->name, data, + &max6650_cooling_ops); + if (IS_ERR(data->cooling_dev)) + dev_warn(&client->dev, + "thermal cooling device register failed: %ld\n", + PTR_ERR(data->cooling_dev)); + else + thermal_cdev_update(data->cooling_dev); +#endif + return 0; +} + +static int max6650_remove(struct i2c_client *client) +{ + struct max6650_data *data = i2c_get_clientdata(client); + + if (!IS_ERR(data->cooling_dev)) + thermal_cooling_device_unregister(data->cooling_dev); + + return 0; } static const struct i2c_device_id max6650_id[] = { @@ -743,6 +830,7 @@ static struct i2c_driver max6650_driver = { .of_match_table = of_match_ptr(max6650_dt_match), }, .probe = max6650_probe, + .remove = max6650_remove, .id_table = max6650_id, }; From e57695e772e87e270ee451483b76ba1ccc1f1cfc Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 22 Apr 2019 14:39:37 -0300 Subject: [PATCH 120/125] docs: hwmon: convert three docs to ReST format Those three new drivers were missed on the initial conversion to ReST format. So: - Rename them to .rst; - Add them to the hwmon index.rst index; - add some blank lines at the "Supported systems:" part, in order to allow Sphinx to properly identify new lines, suppressing warnings and avoid it to output some random lines in bold; - When multiple authors are involved, change the authors part to a list, in order to avoid adding blank lines. - adjust the table cells (one of the tables seemed to be assuming that tab is 4 positions instead of 8) and add the table markup. - be sure that the section markups have the same number of characters as the section title. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Guenter Roeck --- Documentation/hwmon/index.rst | 3 +++ Documentation/hwmon/{ir38064 => ir38064.rst} | 21 ++++++++++++------- .../hwmon/{isl68137 => isl68137.rst} | 16 ++++++++++---- .../hwmon/{lochnagar => lochnagar.rst} | 7 +++++-- 4 files changed, 33 insertions(+), 14 deletions(-) rename Documentation/hwmon/{ir38064 => ir38064.rst} (76%) rename Documentation/hwmon/{isl68137 => isl68137.rst} (85%) rename Documentation/hwmon/{lochnagar => lochnagar.rst} (93%) diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index 893804414510..3fa14fe7b49c 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -65,6 +65,8 @@ Hardware Monitoring Kernel Drivers ina2xx.rst ina3221.rst ir35221.rst + ir38064.rst + isl68137.rst it87.rst jc42.rst k10temp.rst @@ -86,6 +88,7 @@ Hardware Monitoring Kernel Drivers lm93.rst lm95234.rst lm95245.rst + lochnagar.rst ltc2945.rst ltc2978.rst ltc2990.rst diff --git a/Documentation/hwmon/ir38064 b/Documentation/hwmon/ir38064.rst similarity index 76% rename from Documentation/hwmon/ir38064 rename to Documentation/hwmon/ir38064.rst index 9f218c39bfe6..c455d755a267 100644 --- a/Documentation/hwmon/ir38064 +++ b/Documentation/hwmon/ir38064.rst @@ -2,15 +2,18 @@ Kernel driver ir38064 ===================== Supported chips: + * Infineon IR38064 + Prefix: 'ir38064' Addresses scanned: - + Datasheet: Publicly available at the Infineon webiste https://www.infineon.com/dgdl/Infineon-IR38064MTRPBF-DS-v03_07-EN.pdf?fileId=5546d462584d1d4a0158db0d9efb67ca Authors: - Maxim Sloyko - Patrick Venture + - Maxim Sloyko + - Patrick Venture Description ----------- @@ -26,29 +29,30 @@ devices explicitly. Sysfs attributes ---------------- +======================= =========================== curr1_label "iout1" curr1_input Measured output current curr1_crit Critical maximum current curr1_crit_alarm Current critical high alarm curr1_max Maximum current -curr1_max_alarm Current high alarm +curr1_max_alarm Current high alarm in1_label "vin" in1_input Measured input voltage in1_crit Critical maximum input voltage in1_crit_alarm Input voltage critical high alarm -in1_min Minimum input voltage +in1_min Minimum input voltage in1_min_alarm Input voltage low alarm in2_label "vout1" in2_input Measured output voltage in2_lcrit Critical minimum output voltage -in2_lcrit_alarm Output voltage critical low alarm +in2_lcrit_alarm Output voltage critical low alarm in2_crit Critical maximum output voltage in2_crit_alarm Output voltage critical high alarm -in2_max Maximum output voltage +in2_max Maximum output voltage in2_max_alarm Output voltage high alarm -in2_min Minimum output voltage +in2_min Minimum output voltage in2_min_alarm Output voltage low alarm power1_label "pout1" @@ -58,4 +62,5 @@ temp1_input Measured temperature temp1_crit Critical high temperature temp1_crit_alarm Chip temperature critical high alarm temp1_max Maximum temperature -temp1_max_alarm Chip temperature high alarm +temp1_max_alarm Chip temperature high alarm +======================= =========================== diff --git a/Documentation/hwmon/isl68137 b/Documentation/hwmon/isl68137.rst similarity index 85% rename from Documentation/hwmon/isl68137 rename to Documentation/hwmon/isl68137.rst index 92e5c5fc5b77..a5a7c8545c9e 100644 --- a/Documentation/hwmon/isl68137 +++ b/Documentation/hwmon/isl68137.rst @@ -2,16 +2,22 @@ Kernel driver isl68137 ====================== Supported chips: + * Intersil ISL68137 + Prefix: 'isl68137' + Addresses scanned: - - Datasheet: Publicly available at the Intersil website + + Datasheet: + + Publicly available at the Intersil website https://www.intersil.com/content/dam/Intersil/documents/isl6/isl68137.pdf Authors: - Maxim Sloyko - Robert Lippert - Patrick Venture + - Maxim Sloyko + - Robert Lippert + - Patrick Venture Description ----------- @@ -32,6 +38,7 @@ Beyond the normal sysfs pmbus attributes, the driver exposes a control attribute Additional Sysfs attributes --------------------------- +======================= ==================================== avs(0|1)_enable Controls the AVS state of each rail. curr1_label "iin" @@ -70,3 +77,4 @@ temp[1-3]_crit Critical high temperature temp[1-3]_crit_alarm Chip temperature critical high alarm temp[1-3]_max Maximum temperature temp[1-3]_max_alarm Chip temperature high alarm +======================= ==================================== diff --git a/Documentation/hwmon/lochnagar b/Documentation/hwmon/lochnagar.rst similarity index 93% rename from Documentation/hwmon/lochnagar rename to Documentation/hwmon/lochnagar.rst index e9686fb3eb40..1d609c4d18c3 100644 --- a/Documentation/hwmon/lochnagar +++ b/Documentation/hwmon/lochnagar.rst @@ -1,5 +1,5 @@ Kernel Driver Lochnagar -======================== +======================= Supported systems: * Cirrus Logic : Lochnagar 2 @@ -21,6 +21,7 @@ by software. Sysfs attributes ---------------- +======================= ======================================================= temp1_input The Lochnagar board temperature (milliCelsius) in0_input Measured voltage for DBVDD1 (milliVolts) in0_label "DBVDD1" @@ -76,5 +77,7 @@ curr8_label "MICVDD" power8_average Measured average power for MICVDD (microWatts) power8_average_interval Power averaging time input valid from 1 to 1708mS power8_label "MICVDD" +======================= ======================================================= -Note: It is not possible to measure voltage on the SYSVDD rail. +Note: + It is not possible to measure voltage on the SYSVDD rail. From f786dbbe6f2683d6ed0823f3ee53203afeea1ec7 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 22 Apr 2019 08:14:55 -0300 Subject: [PATCH 121/125] docs: hwmon: remove the extension from .rst files On almost all places, we're including ReST files without the extension. Let's remove the extension here as well, in order to use just one standard. Suggested-by: Jani Nikula Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Guenter Roeck --- Documentation/hwmon/index.rst | 322 +++++++++++++++++----------------- 1 file changed, 161 insertions(+), 161 deletions(-) diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index 3fa14fe7b49c..ee090e51653a 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -5,11 +5,11 @@ Linux Hardware Monitoring .. toctree:: :maxdepth: 1 - hwmon-kernel-api.rst - pmbus-core.rst - submitting-patches.rst - sysfs-interface.rst - userspace-tools.rst + hwmon-kernel-api + pmbus-core + submitting-patches + sysfs-interface + userspace-tools Hardware Monitoring Kernel Drivers ================================== @@ -17,162 +17,162 @@ Hardware Monitoring Kernel Drivers .. toctree:: :maxdepth: 1 - ab8500.rst - abituguru.rst - abituguru3.rst - abx500.rst - acpi_power_meter.rst - ad7314.rst - adc128d818.rst - adm1021.rst - adm1025.rst - adm1026.rst - adm1031.rst - adm1275.rst - adm9240.rst - ads1015.rst - ads7828.rst - adt7410.rst - adt7411.rst - adt7462.rst - adt7470.rst - adt7475.rst - amc6821.rst - asb100.rst - asc7621.rst - aspeed-pwm-tacho.rst - coretemp.rst - da9052.rst - da9055.rst - dme1737.rst - ds1621.rst - ds620.rst - emc1403.rst - emc2103.rst - emc6w201.rst - f71805f.rst - f71882fg.rst - fam15h_power.rst - ftsteutates.rst - g760a.rst - g762.rst - gl518sm.rst - hih6130.rst - ibmaem.rst - ibm-cffps.rst - ibmpowernv.rst - ina209.rst - ina2xx.rst - ina3221.rst - ir35221.rst - ir38064.rst - isl68137.rst - it87.rst - jc42.rst - k10temp.rst - k8temp.rst - lineage-pem.rst - lm25066.rst - lm63.rst - lm70.rst - lm73.rst - lm75.rst - lm77.rst - lm78.rst - lm80.rst - lm83.rst - lm85.rst - lm87.rst - lm90.rst - lm92.rst - lm93.rst - lm95234.rst - lm95245.rst - lochnagar.rst - ltc2945.rst - ltc2978.rst - ltc2990.rst - ltc3815.rst - ltc4151.rst - ltc4215.rst - ltc4245.rst - ltc4260.rst - ltc4261.rst - max16064.rst - max16065.rst - max1619.rst - max1668.rst - max197.rst - max20751.rst - max31722.rst - max31785.rst - max31790.rst - max34440.rst - max6639.rst - max6642.rst - max6650.rst - max6697.rst - max8688.rst - mc13783-adc.rst - mcp3021.rst - menf21bmc.rst - mlxreg-fan.rst - nct6683.rst - nct6775.rst - nct7802.rst - nct7904.rst - npcm750-pwm-fan.rst - nsa320.rst - ntc_thermistor.rst - occ.rst - pc87360.rst - pc87427.rst - pcf8591.rst - pmbus.rst - powr1220.rst - pwm-fan.rst - raspberrypi-hwmon.rst - sch5627.rst - sch5636.rst - scpi-hwmon.rst - sht15.rst - sht21.rst - sht3x.rst - shtc1.rst - sis5595.rst - smm665.rst - smsc47b397.rst - smsc47m192.rst - smsc47m1.rst - tc654.rst - tc74.rst - thmc50.rst - tmp102.rst - tmp103.rst - tmp108.rst - tmp401.rst - tmp421.rst - tps40422.rst - twl4030-madc-hwmon.rst - ucd9000.rst - ucd9200.rst - vexpress.rst - via686a.rst - vt1211.rst - w83627ehf.rst - w83627hf.rst - w83773g.rst - w83781d.rst - w83791d.rst - w83792d.rst - w83793.rst - w83795.rst - w83l785ts.rst - w83l786ng.rst - wm831x.rst - wm8350.rst - xgene-hwmon.rst - zl6100.rst + ab8500 + abituguru + abituguru3 + abx500 + acpi_power_meter + ad7314 + adc128d818 + adm1021 + adm1025 + adm1026 + adm1031 + adm1275 + adm9240 + ads1015 + ads7828 + adt7410 + adt7411 + adt7462 + adt7470 + adt7475 + amc6821 + asb100 + asc7621 + aspeed-pwm-tacho + coretemp + da9052 + da9055 + dme1737 + ds1621 + ds620 + emc1403 + emc2103 + emc6w201 + f71805f + f71882fg + fam15h_power + ftsteutates + g760a + g762 + gl518sm + hih6130 + ibmaem + ibm-cffps + ibmpowernv + ina209 + ina2xx + ina3221 + ir35221 + ir38064 + isl68137 + it87 + jc42 + k10temp + k8temp + lineage-pem + lm25066 + lm63 + lm70 + lm73 + lm75 + lm77 + lm78 + lm80 + lm83 + lm85 + lm87 + lm90 + lm92 + lm93 + lm95234 + lm95245 + lochnagar + ltc2945 + ltc2978 + ltc2990 + ltc3815 + ltc4151 + ltc4215 + ltc4245 + ltc4260 + ltc4261 + max16064 + max16065 + max1619 + max1668 + max197 + max20751 + max31722 + max31785 + max31790 + max34440 + max6639 + max6642 + max6650 + max6697 + max8688 + mc13783-adc + mcp3021 + menf21bmc + mlxreg-fan + nct6683 + nct6775 + nct7802 + nct7904 + npcm750-pwm-fan + nsa320 + ntc_thermistor + occ + pc87360 + pc87427 + pcf8591 + pmbus + powr1220 + pwm-fan + raspberrypi-hwmon + sch5627 + sch5636 + scpi-hwmon + sht15 + sht21 + sht3x + shtc1 + sis5595 + smm665 + smsc47b397 + smsc47m192 + smsc47m1 + tc654 + tc74 + thmc50 + tmp102 + tmp103 + tmp108 + tmp401 + tmp421 + tps40422 + twl4030-madc-hwmon + ucd9000 + ucd9200 + vexpress + via686a + vt1211 + w83627ehf + w83627hf + w83773g + w83781d + w83791d + w83792d + w83793 + w83795 + w83l785ts + w83l786ng + wm831x + wm8350 + xgene-hwmon + zl6100 .. only:: subproject and html From 212244f76d13bdbb57fa8096a8aa94c5b55c4be5 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 22 Apr 2019 10:12:32 -0700 Subject: [PATCH 122/125] hwmon: (max6650) Drop call to thermal_cdev_update The call to thermal_cdev_update() causes any fan connected to the chip to stop immediately. If the thermal subsystem is not set up to actually handle the chip as cooling device, the remains stopped until is is restarted manually with a write to a sysfs attribute. There is evidence that thermal_cdev_update() should only be called from thermal governors, not from thermal cooling device drivers. Drop the call. Cc: Jean-Francois Dagenais Tested-by: Jean-Francois Dagenais Signed-off-by: Guenter Roeck --- drivers/hwmon/max6650.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/hwmon/max6650.c b/drivers/hwmon/max6650.c index e977c2f2d74a..939953240827 100644 --- a/drivers/hwmon/max6650.c +++ b/drivers/hwmon/max6650.c @@ -801,8 +801,6 @@ static int max6650_probe(struct i2c_client *client, dev_warn(&client->dev, "thermal cooling device register failed: %ld\n", PTR_ERR(data->cooling_dev)); - else - thermal_cdev_update(data->cooling_dev); #endif return 0; } From a60170000338c59b4de43e7c6e38413b8a748f0d Mon Sep 17 00:00:00 2001 From: Kefeng Wang Date: Tue, 23 Apr 2019 15:50:02 +0800 Subject: [PATCH 123/125] hwmon: (s3c) Use dev_get_drvdata() Using dev_get_drvdata directly. Cc: Jean Delvare Cc: Guenter Roeck Signed-off-by: Kefeng Wang Signed-off-by: Guenter Roeck --- drivers/hwmon/s3c-hwmon.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/s3c-hwmon.c b/drivers/hwmon/s3c-hwmon.c index 0c4710d35d16..0d65aa5985e2 100644 --- a/drivers/hwmon/s3c-hwmon.c +++ b/drivers/hwmon/s3c-hwmon.c @@ -98,7 +98,7 @@ static int s3c_hwmon_read_ch(struct device *dev, static ssize_t s3c_hwmon_show_raw(struct device *dev, struct device_attribute *attr, char *buf) { - struct s3c_hwmon *adc = platform_get_drvdata(to_platform_device(dev)); + struct s3c_hwmon *adc = dev_get_drvdata(dev); struct sensor_device_attribute *sa = to_sensor_dev_attr(attr); int ret; @@ -164,7 +164,7 @@ static ssize_t s3c_hwmon_ch_show(struct device *dev, char *buf) { struct sensor_device_attribute *sen_attr = to_sensor_dev_attr(attr); - struct s3c_hwmon *hwmon = platform_get_drvdata(to_platform_device(dev)); + struct s3c_hwmon *hwmon = dev_get_drvdata(dev); struct s3c_hwmon_pdata *pdata = dev_get_platdata(dev); struct s3c_hwmon_chcfg *cfg; int ret; From be889be7785d21d8958d51d35cf52b73826657df Mon Sep 17 00:00:00 2001 From: Iker Perez del Palomar Sustatxa Date: Fri, 3 May 2019 17:15:01 +0100 Subject: [PATCH 124/125] dt-bindings: hwmon: Add tmp75b to lm75.txt Update the LM75's devicetree definition to allow Texas Instruments TMP75B be probed. Signed-off-by: Iker Perez del Palomar Sustatxa Signed-off-by: Guenter Roeck --- Documentation/devicetree/bindings/hwmon/lm75.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/hwmon/lm75.txt b/Documentation/devicetree/bindings/hwmon/lm75.txt index 12d8cf7cf592..586b5ed70be7 100644 --- a/Documentation/devicetree/bindings/hwmon/lm75.txt +++ b/Documentation/devicetree/bindings/hwmon/lm75.txt @@ -25,6 +25,7 @@ Required properties: "ti,tmp175", "ti,tmp275", "ti,tmp75", + "ti,tmp75b", "ti,tmp75c", - reg: I2C bus address of the device From 39abe9d88b30a51029b0b29a708a4f4459034565 Mon Sep 17 00:00:00 2001 From: Iker Perez del Palomar Sustatxa Date: Fri, 3 May 2019 17:15:00 +0100 Subject: [PATCH 125/125] hwmon: (lm75) Add support for TMP75B The TMP75B has a different control register, supports 12-bit resolution and the default conversion rate is 37 Hz. Signed-off-by: Iker Perez del Palomar Sustatxa Signed-off-by: Guenter Roeck --- Documentation/hwmon/lm75.rst | 6 ++++-- drivers/hwmon/lm75.c | 11 +++++++++++ 2 files changed, 15 insertions(+), 2 deletions(-) diff --git a/Documentation/hwmon/lm75.rst b/Documentation/hwmon/lm75.rst index 6fd4d2df5420..ba8acbd2a6cb 100644 --- a/Documentation/hwmon/lm75.rst +++ b/Documentation/hwmon/lm75.rst @@ -93,9 +93,9 @@ Supported chips: https://www.st.com/resource/en/datasheet/stlm75.pdf - * Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, TMP75C, TMP175, TMP275 + * Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, TMP75B, TMP75C, TMP175, TMP275 - Prefixes: 'tmp100', 'tmp101', 'tmp105', 'tmp112', 'tmp175', 'tmp75', 'tmp75c', 'tmp275' + Prefixes: 'tmp100', 'tmp101', 'tmp105', 'tmp112', 'tmp175', 'tmp75', 'tmp75b', 'tmp75c', 'tmp275' Addresses scanned: none @@ -111,6 +111,8 @@ Supported chips: http://www.ti.com/product/tmp75 + http://www.ti.com/product/tmp75b + http://www.ti.com/product/tmp75c http://www.ti.com/product/tmp175 diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c index f307743edc25..423a382420b9 100644 --- a/drivers/hwmon/lm75.c +++ b/drivers/hwmon/lm75.c @@ -59,6 +59,7 @@ enum lm75_type { /* keep sorted in alphabetical order */ tmp175, tmp275, tmp75, + tmp75b, tmp75c, }; @@ -354,6 +355,11 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id) data->resolution = 12; data->sample_time = MSEC_PER_SEC / 2; break; + case tmp75b: /* not one-shot mode, Conversion rate 37Hz */ + clr_mask |= 1 << 15 | 0x3 << 13; + data->resolution = 12; + data->sample_time = MSEC_PER_SEC / 37; + break; case tmp75c: clr_mask |= 1 << 5; /* not one-shot mode */ data->resolution = 12; @@ -414,6 +420,7 @@ static const struct i2c_device_id lm75_ids[] = { { "tmp175", tmp175, }, { "tmp275", tmp275, }, { "tmp75", tmp75, }, + { "tmp75b", tmp75b, }, { "tmp75c", tmp75c, }, { /* LIST END */ } }; @@ -512,6 +519,10 @@ static const struct of_device_id __maybe_unused lm75_of_match[] = { .compatible = "ti,tmp75", .data = (void *)tmp75 }, + { + .compatible = "ti,tmp75b", + .data = (void *)tmp75b + }, { .compatible = "ti,tmp75c", .data = (void *)tmp75c