Merge branch 'next-i2c' of git://aeryn.fluff.org.uk/bjdooks/linux
* 'next-i2c' of git://aeryn.fluff.org.uk/bjdooks/linux: i2c: driver for the Synopsys DesignWare I2C controller
This commit is contained in:
commit
7b58fc2184
|
@ -326,6 +326,15 @@ config I2C_DAVINCI
|
|||
devices such as DaVinci NIC.
|
||||
For details please see http://www.ti.com/davinci
|
||||
|
||||
config I2C_DESIGNWARE
|
||||
tristate "Synopsys DesignWare"
|
||||
help
|
||||
If you say yes to this option, support will be included for the
|
||||
Synopsys DesignWare I2C adapter. Only master mode is supported.
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called i2c-designware.
|
||||
|
||||
config I2C_GPIO
|
||||
tristate "GPIO-based bitbanging I2C"
|
||||
depends on GENERIC_GPIO
|
||||
|
|
|
@ -30,6 +30,7 @@ obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o
|
|||
obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o
|
||||
obj-$(CONFIG_I2C_CPM) += i2c-cpm.o
|
||||
obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o
|
||||
obj-$(CONFIG_I2C_DESIGNWARE) += i2c-designware.o
|
||||
obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o
|
||||
obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o
|
||||
obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o
|
||||
|
|
|
@ -0,0 +1,624 @@
|
|||
/*
|
||||
* Synopsys Designware I2C adapter driver (master only).
|
||||
*
|
||||
* Based on the TI DAVINCI I2C adapter driver.
|
||||
*
|
||||
* Copyright (C) 2006 Texas Instruments.
|
||||
* Copyright (C) 2007 MontaVista Software Inc.
|
||||
* Copyright (C) 2009 Provigent Ltd.
|
||||
*
|
||||
* ----------------------------------------------------------------------------
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
* ----------------------------------------------------------------------------
|
||||
*
|
||||
*/
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/sched.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/io.h>
|
||||
|
||||
/*
|
||||
* Registers offset
|
||||
*/
|
||||
#define DW_IC_CON 0x0
|
||||
#define DW_IC_TAR 0x4
|
||||
#define DW_IC_DATA_CMD 0x10
|
||||
#define DW_IC_SS_SCL_HCNT 0x14
|
||||
#define DW_IC_SS_SCL_LCNT 0x18
|
||||
#define DW_IC_FS_SCL_HCNT 0x1c
|
||||
#define DW_IC_FS_SCL_LCNT 0x20
|
||||
#define DW_IC_INTR_STAT 0x2c
|
||||
#define DW_IC_INTR_MASK 0x30
|
||||
#define DW_IC_CLR_INTR 0x40
|
||||
#define DW_IC_ENABLE 0x6c
|
||||
#define DW_IC_STATUS 0x70
|
||||
#define DW_IC_TXFLR 0x74
|
||||
#define DW_IC_RXFLR 0x78
|
||||
#define DW_IC_COMP_PARAM_1 0xf4
|
||||
#define DW_IC_TX_ABRT_SOURCE 0x80
|
||||
|
||||
#define DW_IC_CON_MASTER 0x1
|
||||
#define DW_IC_CON_SPEED_STD 0x2
|
||||
#define DW_IC_CON_SPEED_FAST 0x4
|
||||
#define DW_IC_CON_10BITADDR_MASTER 0x10
|
||||
#define DW_IC_CON_RESTART_EN 0x20
|
||||
#define DW_IC_CON_SLAVE_DISABLE 0x40
|
||||
|
||||
#define DW_IC_INTR_TX_EMPTY 0x10
|
||||
#define DW_IC_INTR_TX_ABRT 0x40
|
||||
#define DW_IC_INTR_STOP_DET 0x200
|
||||
|
||||
#define DW_IC_STATUS_ACTIVITY 0x1
|
||||
|
||||
#define DW_IC_ERR_TX_ABRT 0x1
|
||||
|
||||
/*
|
||||
* status codes
|
||||
*/
|
||||
#define STATUS_IDLE 0x0
|
||||
#define STATUS_WRITE_IN_PROGRESS 0x1
|
||||
#define STATUS_READ_IN_PROGRESS 0x2
|
||||
|
||||
#define TIMEOUT 20 /* ms */
|
||||
|
||||
/*
|
||||
* hardware abort codes from the DW_IC_TX_ABRT_SOURCE register
|
||||
*
|
||||
* only expected abort codes are listed here
|
||||
* refer to the datasheet for the full list
|
||||
*/
|
||||
#define ABRT_7B_ADDR_NOACK 0
|
||||
#define ABRT_10ADDR1_NOACK 1
|
||||
#define ABRT_10ADDR2_NOACK 2
|
||||
#define ABRT_TXDATA_NOACK 3
|
||||
#define ABRT_GCALL_NOACK 4
|
||||
#define ABRT_GCALL_READ 5
|
||||
#define ABRT_SBYTE_ACKDET 7
|
||||
#define ABRT_SBYTE_NORSTRT 9
|
||||
#define ABRT_10B_RD_NORSTRT 10
|
||||
#define ARB_MASTER_DIS 11
|
||||
#define ARB_LOST 12
|
||||
|
||||
static char *abort_sources[] = {
|
||||
[ABRT_7B_ADDR_NOACK] =
|
||||
"slave address not acknowledged (7bit mode)",
|
||||
[ABRT_10ADDR1_NOACK] =
|
||||
"first address byte not acknowledged (10bit mode)",
|
||||
[ABRT_10ADDR2_NOACK] =
|
||||
"second address byte not acknowledged (10bit mode)",
|
||||
[ABRT_TXDATA_NOACK] =
|
||||
"data not acknowledged",
|
||||
[ABRT_GCALL_NOACK] =
|
||||
"no acknowledgement for a general call",
|
||||
[ABRT_GCALL_READ] =
|
||||
"read after general call",
|
||||
[ABRT_SBYTE_ACKDET] =
|
||||
"start byte acknowledged",
|
||||
[ABRT_SBYTE_NORSTRT] =
|
||||
"trying to send start byte when restart is disabled",
|
||||
[ABRT_10B_RD_NORSTRT] =
|
||||
"trying to read when restart is disabled (10bit mode)",
|
||||
[ARB_MASTER_DIS] =
|
||||
"trying to use disabled adapter",
|
||||
[ARB_LOST] =
|
||||
"lost arbitration",
|
||||
};
|
||||
|
||||
/**
|
||||
* struct dw_i2c_dev - private i2c-designware data
|
||||
* @dev: driver model device node
|
||||
* @base: IO registers pointer
|
||||
* @cmd_complete: tx completion indicator
|
||||
* @pump_msg: continue in progress transfers
|
||||
* @lock: protect this struct and IO registers
|
||||
* @clk: input reference clock
|
||||
* @cmd_err: run time hadware error code
|
||||
* @msgs: points to an array of messages currently being transfered
|
||||
* @msgs_num: the number of elements in msgs
|
||||
* @msg_write_idx: the element index of the current tx message in the msgs
|
||||
* array
|
||||
* @tx_buf_len: the length of the current tx buffer
|
||||
* @tx_buf: the current tx buffer
|
||||
* @msg_read_idx: the element index of the current rx message in the msgs
|
||||
* array
|
||||
* @rx_buf_len: the length of the current rx buffer
|
||||
* @rx_buf: the current rx buffer
|
||||
* @msg_err: error status of the current transfer
|
||||
* @status: i2c master status, one of STATUS_*
|
||||
* @abort_source: copy of the TX_ABRT_SOURCE register
|
||||
* @irq: interrupt number for the i2c master
|
||||
* @adapter: i2c subsystem adapter node
|
||||
* @tx_fifo_depth: depth of the hardware tx fifo
|
||||
* @rx_fifo_depth: depth of the hardware rx fifo
|
||||
*/
|
||||
struct dw_i2c_dev {
|
||||
struct device *dev;
|
||||
void __iomem *base;
|
||||
struct completion cmd_complete;
|
||||
struct tasklet_struct pump_msg;
|
||||
struct mutex lock;
|
||||
struct clk *clk;
|
||||
int cmd_err;
|
||||
struct i2c_msg *msgs;
|
||||
int msgs_num;
|
||||
int msg_write_idx;
|
||||
u16 tx_buf_len;
|
||||
u8 *tx_buf;
|
||||
int msg_read_idx;
|
||||
u16 rx_buf_len;
|
||||
u8 *rx_buf;
|
||||
int msg_err;
|
||||
unsigned int status;
|
||||
u16 abort_source;
|
||||
int irq;
|
||||
struct i2c_adapter adapter;
|
||||
unsigned int tx_fifo_depth;
|
||||
unsigned int rx_fifo_depth;
|
||||
};
|
||||
|
||||
/**
|
||||
* i2c_dw_init() - initialize the designware i2c master hardware
|
||||
* @dev: device private data
|
||||
*
|
||||
* This functions configures and enables the I2C master.
|
||||
* This function is called during I2C init function, and in case of timeout at
|
||||
* run time.
|
||||
*/
|
||||
static void i2c_dw_init(struct dw_i2c_dev *dev)
|
||||
{
|
||||
u32 input_clock_khz = clk_get_rate(dev->clk) / 1000;
|
||||
u16 ic_con;
|
||||
|
||||
/* Disable the adapter */
|
||||
writeb(0, dev->base + DW_IC_ENABLE);
|
||||
|
||||
/* set standard and fast speed deviders for high/low periods */
|
||||
writew((input_clock_khz * 40 / 10000)+1, /* std speed high, 4us */
|
||||
dev->base + DW_IC_SS_SCL_HCNT);
|
||||
writew((input_clock_khz * 47 / 10000)+1, /* std speed low, 4.7us */
|
||||
dev->base + DW_IC_SS_SCL_LCNT);
|
||||
writew((input_clock_khz * 6 / 10000)+1, /* fast speed high, 0.6us */
|
||||
dev->base + DW_IC_FS_SCL_HCNT);
|
||||
writew((input_clock_khz * 13 / 10000)+1, /* fast speed low, 1.3us */
|
||||
dev->base + DW_IC_FS_SCL_LCNT);
|
||||
|
||||
/* configure the i2c master */
|
||||
ic_con = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
|
||||
DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST;
|
||||
writew(ic_con, dev->base + DW_IC_CON);
|
||||
}
|
||||
|
||||
/*
|
||||
* Waiting for bus not busy
|
||||
*/
|
||||
static int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev)
|
||||
{
|
||||
int timeout = TIMEOUT;
|
||||
|
||||
while (readb(dev->base + DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) {
|
||||
if (timeout <= 0) {
|
||||
dev_warn(dev->dev, "timeout waiting for bus ready\n");
|
||||
return -ETIMEDOUT;
|
||||
}
|
||||
timeout--;
|
||||
mdelay(1);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* Initiate low level master read/write transaction.
|
||||
* This function is called from i2c_dw_xfer when starting a transfer.
|
||||
* This function is also called from dw_i2c_pump_msg to continue a transfer
|
||||
* that is longer than the size of the TX FIFO.
|
||||
*/
|
||||
static void
|
||||
i2c_dw_xfer_msg(struct i2c_adapter *adap)
|
||||
{
|
||||
struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
|
||||
struct i2c_msg *msgs = dev->msgs;
|
||||
int num = dev->msgs_num;
|
||||
u16 ic_con, intr_mask;
|
||||
int tx_limit = dev->tx_fifo_depth - readb(dev->base + DW_IC_TXFLR);
|
||||
int rx_limit = dev->rx_fifo_depth - readb(dev->base + DW_IC_RXFLR);
|
||||
u16 addr = msgs[dev->msg_write_idx].addr;
|
||||
u16 buf_len = dev->tx_buf_len;
|
||||
|
||||
if (!(dev->status & STATUS_WRITE_IN_PROGRESS)) {
|
||||
/* Disable the adapter */
|
||||
writeb(0, dev->base + DW_IC_ENABLE);
|
||||
|
||||
/* set the slave (target) address */
|
||||
writew(msgs[dev->msg_write_idx].addr, dev->base + DW_IC_TAR);
|
||||
|
||||
/* if the slave address is ten bit address, enable 10BITADDR */
|
||||
ic_con = readw(dev->base + DW_IC_CON);
|
||||
if (msgs[dev->msg_write_idx].flags & I2C_M_TEN)
|
||||
ic_con |= DW_IC_CON_10BITADDR_MASTER;
|
||||
else
|
||||
ic_con &= ~DW_IC_CON_10BITADDR_MASTER;
|
||||
writew(ic_con, dev->base + DW_IC_CON);
|
||||
|
||||
/* Enable the adapter */
|
||||
writeb(1, dev->base + DW_IC_ENABLE);
|
||||
}
|
||||
|
||||
for (; dev->msg_write_idx < num; dev->msg_write_idx++) {
|
||||
/* if target address has changed, we need to
|
||||
* reprogram the target address in the i2c
|
||||
* adapter when we are done with this transfer
|
||||
*/
|
||||
if (msgs[dev->msg_write_idx].addr != addr)
|
||||
return;
|
||||
|
||||
if (msgs[dev->msg_write_idx].len == 0) {
|
||||
dev_err(dev->dev,
|
||||
"%s: invalid message length\n", __func__);
|
||||
dev->msg_err = -EINVAL;
|
||||
return;
|
||||
}
|
||||
|
||||
if (!(dev->status & STATUS_WRITE_IN_PROGRESS)) {
|
||||
/* new i2c_msg */
|
||||
dev->tx_buf = msgs[dev->msg_write_idx].buf;
|
||||
buf_len = msgs[dev->msg_write_idx].len;
|
||||
}
|
||||
|
||||
while (buf_len > 0 && tx_limit > 0 && rx_limit > 0) {
|
||||
if (msgs[dev->msg_write_idx].flags & I2C_M_RD) {
|
||||
writew(0x100, dev->base + DW_IC_DATA_CMD);
|
||||
rx_limit--;
|
||||
} else
|
||||
writew(*(dev->tx_buf++),
|
||||
dev->base + DW_IC_DATA_CMD);
|
||||
tx_limit--; buf_len--;
|
||||
}
|
||||
}
|
||||
|
||||
intr_mask = DW_IC_INTR_STOP_DET | DW_IC_INTR_TX_ABRT;
|
||||
if (buf_len > 0) { /* more bytes to be written */
|
||||
intr_mask |= DW_IC_INTR_TX_EMPTY;
|
||||
dev->status |= STATUS_WRITE_IN_PROGRESS;
|
||||
} else
|
||||
dev->status &= ~STATUS_WRITE_IN_PROGRESS;
|
||||
writew(intr_mask, dev->base + DW_IC_INTR_MASK);
|
||||
|
||||
dev->tx_buf_len = buf_len;
|
||||
}
|
||||
|
||||
static void
|
||||
i2c_dw_read(struct i2c_adapter *adap)
|
||||
{
|
||||
struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
|
||||
struct i2c_msg *msgs = dev->msgs;
|
||||
int num = dev->msgs_num;
|
||||
u16 addr = msgs[dev->msg_read_idx].addr;
|
||||
int rx_valid = readw(dev->base + DW_IC_RXFLR);
|
||||
|
||||
for (; dev->msg_read_idx < num; dev->msg_read_idx++) {
|
||||
u16 len;
|
||||
u8 *buf;
|
||||
|
||||
if (!(msgs[dev->msg_read_idx].flags & I2C_M_RD))
|
||||
continue;
|
||||
|
||||
/* different i2c client, reprogram the i2c adapter */
|
||||
if (msgs[dev->msg_read_idx].addr != addr)
|
||||
return;
|
||||
|
||||
if (!(dev->status & STATUS_READ_IN_PROGRESS)) {
|
||||
len = msgs[dev->msg_read_idx].len;
|
||||
buf = msgs[dev->msg_read_idx].buf;
|
||||
} else {
|
||||
len = dev->rx_buf_len;
|
||||
buf = dev->rx_buf;
|
||||
}
|
||||
|
||||
for (; len > 0 && rx_valid > 0; len--, rx_valid--)
|
||||
*buf++ = readb(dev->base + DW_IC_DATA_CMD);
|
||||
|
||||
if (len > 0) {
|
||||
dev->status |= STATUS_READ_IN_PROGRESS;
|
||||
dev->rx_buf_len = len;
|
||||
dev->rx_buf = buf;
|
||||
return;
|
||||
} else
|
||||
dev->status &= ~STATUS_READ_IN_PROGRESS;
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
* Prepare controller for a transaction and call i2c_dw_xfer_msg
|
||||
*/
|
||||
static int
|
||||
i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
|
||||
{
|
||||
struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
|
||||
int ret;
|
||||
|
||||
dev_dbg(dev->dev, "%s: msgs: %d\n", __func__, num);
|
||||
|
||||
mutex_lock(&dev->lock);
|
||||
|
||||
INIT_COMPLETION(dev->cmd_complete);
|
||||
dev->msgs = msgs;
|
||||
dev->msgs_num = num;
|
||||
dev->cmd_err = 0;
|
||||
dev->msg_write_idx = 0;
|
||||
dev->msg_read_idx = 0;
|
||||
dev->msg_err = 0;
|
||||
dev->status = STATUS_IDLE;
|
||||
|
||||
ret = i2c_dw_wait_bus_not_busy(dev);
|
||||
if (ret < 0)
|
||||
goto done;
|
||||
|
||||
/* start the transfers */
|
||||
i2c_dw_xfer_msg(adap);
|
||||
|
||||
/* wait for tx to complete */
|
||||
ret = wait_for_completion_interruptible_timeout(&dev->cmd_complete, HZ);
|
||||
if (ret == 0) {
|
||||
dev_err(dev->dev, "controller timed out\n");
|
||||
i2c_dw_init(dev);
|
||||
ret = -ETIMEDOUT;
|
||||
goto done;
|
||||
} else if (ret < 0)
|
||||
goto done;
|
||||
|
||||
if (dev->msg_err) {
|
||||
ret = dev->msg_err;
|
||||
goto done;
|
||||
}
|
||||
|
||||
/* no error */
|
||||
if (likely(!dev->cmd_err)) {
|
||||
/* read rx fifo, and disable the adapter */
|
||||
do {
|
||||
i2c_dw_read(adap);
|
||||
} while (dev->status & STATUS_READ_IN_PROGRESS);
|
||||
writeb(0, dev->base + DW_IC_ENABLE);
|
||||
ret = num;
|
||||
goto done;
|
||||
}
|
||||
|
||||
/* We have an error */
|
||||
if (dev->cmd_err == DW_IC_ERR_TX_ABRT) {
|
||||
unsigned long abort_source = dev->abort_source;
|
||||
int i;
|
||||
|
||||
for_each_bit(i, &abort_source, ARRAY_SIZE(abort_sources)) {
|
||||
dev_err(dev->dev, "%s: %s\n", __func__, abort_sources[i]);
|
||||
}
|
||||
}
|
||||
ret = -EIO;
|
||||
|
||||
done:
|
||||
mutex_unlock(&dev->lock);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static u32 i2c_dw_func(struct i2c_adapter *adap)
|
||||
{
|
||||
return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR;
|
||||
}
|
||||
|
||||
static void dw_i2c_pump_msg(unsigned long data)
|
||||
{
|
||||
struct dw_i2c_dev *dev = (struct dw_i2c_dev *) data;
|
||||
u16 intr_mask;
|
||||
|
||||
i2c_dw_read(&dev->adapter);
|
||||
i2c_dw_xfer_msg(&dev->adapter);
|
||||
|
||||
intr_mask = DW_IC_INTR_STOP_DET | DW_IC_INTR_TX_ABRT;
|
||||
if (dev->status & STATUS_WRITE_IN_PROGRESS)
|
||||
intr_mask |= DW_IC_INTR_TX_EMPTY;
|
||||
writew(intr_mask, dev->base + DW_IC_INTR_MASK);
|
||||
}
|
||||
|
||||
/*
|
||||
* Interrupt service routine. This gets called whenever an I2C interrupt
|
||||
* occurs.
|
||||
*/
|
||||
static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
|
||||
{
|
||||
struct dw_i2c_dev *dev = dev_id;
|
||||
u16 stat;
|
||||
|
||||
stat = readw(dev->base + DW_IC_INTR_STAT);
|
||||
dev_dbg(dev->dev, "%s: stat=0x%x\n", __func__, stat);
|
||||
if (stat & DW_IC_INTR_TX_ABRT) {
|
||||
dev->abort_source = readw(dev->base + DW_IC_TX_ABRT_SOURCE);
|
||||
dev->cmd_err |= DW_IC_ERR_TX_ABRT;
|
||||
dev->status = STATUS_IDLE;
|
||||
} else if (stat & DW_IC_INTR_TX_EMPTY)
|
||||
tasklet_schedule(&dev->pump_msg);
|
||||
|
||||
readb(dev->base + DW_IC_CLR_INTR); /* clear interrupts */
|
||||
writew(0, dev->base + DW_IC_INTR_MASK); /* disable interrupts */
|
||||
if (stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET))
|
||||
complete(&dev->cmd_complete);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static struct i2c_algorithm i2c_dw_algo = {
|
||||
.master_xfer = i2c_dw_xfer,
|
||||
.functionality = i2c_dw_func,
|
||||
};
|
||||
|
||||
static int __devinit dw_i2c_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct dw_i2c_dev *dev;
|
||||
struct i2c_adapter *adap;
|
||||
struct resource *mem, *irq, *ioarea;
|
||||
int r;
|
||||
|
||||
/* NOTE: driver uses the static register mapping */
|
||||
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
if (!mem) {
|
||||
dev_err(&pdev->dev, "no mem resource?\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
|
||||
if (!irq) {
|
||||
dev_err(&pdev->dev, "no irq resource?\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
ioarea = request_mem_region(mem->start, resource_size(mem),
|
||||
pdev->name);
|
||||
if (!ioarea) {
|
||||
dev_err(&pdev->dev, "I2C region already claimed\n");
|
||||
return -EBUSY;
|
||||
}
|
||||
|
||||
dev = kzalloc(sizeof(struct dw_i2c_dev), GFP_KERNEL);
|
||||
if (!dev) {
|
||||
r = -ENOMEM;
|
||||
goto err_release_region;
|
||||
}
|
||||
|
||||
init_completion(&dev->cmd_complete);
|
||||
tasklet_init(&dev->pump_msg, dw_i2c_pump_msg, (unsigned long) dev);
|
||||
mutex_init(&dev->lock);
|
||||
dev->dev = get_device(&pdev->dev);
|
||||
dev->irq = irq->start;
|
||||
platform_set_drvdata(pdev, dev);
|
||||
|
||||
dev->clk = clk_get(&pdev->dev, NULL);
|
||||
if (IS_ERR(dev->clk)) {
|
||||
r = -ENODEV;
|
||||
goto err_free_mem;
|
||||
}
|
||||
clk_enable(dev->clk);
|
||||
|
||||
dev->base = ioremap(mem->start, resource_size(mem));
|
||||
if (dev->base == NULL) {
|
||||
dev_err(&pdev->dev, "failure mapping io resources\n");
|
||||
r = -EBUSY;
|
||||
goto err_unuse_clocks;
|
||||
}
|
||||
{
|
||||
u32 param1 = readl(dev->base + DW_IC_COMP_PARAM_1);
|
||||
|
||||
dev->tx_fifo_depth = ((param1 >> 16) & 0xff) + 1;
|
||||
dev->rx_fifo_depth = ((param1 >> 8) & 0xff) + 1;
|
||||
}
|
||||
i2c_dw_init(dev);
|
||||
|
||||
writew(0, dev->base + DW_IC_INTR_MASK); /* disable IRQ */
|
||||
r = request_irq(dev->irq, i2c_dw_isr, 0, pdev->name, dev);
|
||||
if (r) {
|
||||
dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq);
|
||||
goto err_iounmap;
|
||||
}
|
||||
|
||||
adap = &dev->adapter;
|
||||
i2c_set_adapdata(adap, dev);
|
||||
adap->owner = THIS_MODULE;
|
||||
adap->class = I2C_CLASS_HWMON;
|
||||
strlcpy(adap->name, "Synopsys DesignWare I2C adapter",
|
||||
sizeof(adap->name));
|
||||
adap->algo = &i2c_dw_algo;
|
||||
adap->dev.parent = &pdev->dev;
|
||||
|
||||
adap->nr = pdev->id;
|
||||
r = i2c_add_numbered_adapter(adap);
|
||||
if (r) {
|
||||
dev_err(&pdev->dev, "failure adding adapter\n");
|
||||
goto err_free_irq;
|
||||
}
|
||||
|
||||
return 0;
|
||||
|
||||
err_free_irq:
|
||||
free_irq(dev->irq, dev);
|
||||
err_iounmap:
|
||||
iounmap(dev->base);
|
||||
err_unuse_clocks:
|
||||
clk_disable(dev->clk);
|
||||
clk_put(dev->clk);
|
||||
dev->clk = NULL;
|
||||
err_free_mem:
|
||||
platform_set_drvdata(pdev, NULL);
|
||||
put_device(&pdev->dev);
|
||||
kfree(dev);
|
||||
err_release_region:
|
||||
release_mem_region(mem->start, resource_size(mem));
|
||||
|
||||
return r;
|
||||
}
|
||||
|
||||
static int __devexit dw_i2c_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
|
||||
struct resource *mem;
|
||||
|
||||
platform_set_drvdata(pdev, NULL);
|
||||
i2c_del_adapter(&dev->adapter);
|
||||
put_device(&pdev->dev);
|
||||
|
||||
clk_disable(dev->clk);
|
||||
clk_put(dev->clk);
|
||||
dev->clk = NULL;
|
||||
|
||||
writeb(0, dev->base + DW_IC_ENABLE);
|
||||
free_irq(dev->irq, dev);
|
||||
kfree(dev);
|
||||
|
||||
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
release_mem_region(mem->start, resource_size(mem));
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* work with hotplug and coldplug */
|
||||
MODULE_ALIAS("platform:i2c_designware");
|
||||
|
||||
static struct platform_driver dw_i2c_driver = {
|
||||
.remove = __devexit_p(dw_i2c_remove),
|
||||
.driver = {
|
||||
.name = "i2c_designware",
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
};
|
||||
|
||||
static int __init dw_i2c_init_driver(void)
|
||||
{
|
||||
return platform_driver_probe(&dw_i2c_driver, dw_i2c_probe);
|
||||
}
|
||||
module_init(dw_i2c_init_driver);
|
||||
|
||||
static void __exit dw_i2c_exit_driver(void)
|
||||
{
|
||||
platform_driver_unregister(&dw_i2c_driver);
|
||||
}
|
||||
module_exit(dw_i2c_exit_driver);
|
||||
|
||||
MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
|
||||
MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter");
|
||||
MODULE_LICENSE("GPL");
|
Loading…
Reference in New Issue