OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

ARM: Kirkwood: Convert NSA310 to use gpio-poweroff driver 

Remove the C code and add a Device Tree node for gpio-poweroff.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This commit is contained in:
Andrew Lunn 2012-12-28 15:08:49 +01:00 committed by Arnd Bergmann
parent 12131b5424
commit 7dcc628349
2 changed files with 5 additions and 33 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
arch/arm/boot/dts/kirkwood-nsa310.dts
View File

@ -142,6 +142,11 @@
};
};
gpio_poweroff {
compatible = "gpio-poweroff";
gpios = <&gpio1 16 0>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;

33
arch/arm/mach-kirkwood/board-nsa310.c
View File

@ -11,14 +11,11 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <mach/kirkwood.h>
#include <linux/of.h>
#include "common.h"
#include "mpp.h"
#define NSA310_GPIO_POWER_OFF 48
static unsigned int nsa310_mpp_config[] __initdata = {
MPP12_GPIO, /* led esata green */
MPP13_GPIO, /* led esata red */
@ -43,40 +40,10 @@ static struct i2c_board_info __initdata nsa310_i2c_info[] = {
{ I2C_BOARD_INFO("adt7476", 0x2e) },
};
static void nsa310_power_off(void)
{
gpio_set_value(NSA310_GPIO_POWER_OFF, 1);
}
static int __init nsa310_gpio_request(unsigned int gpio, unsigned long flags,
const char *label)
{
int err;
err = gpio_request_one(gpio, flags, label);
if (err)
pr_err("NSA-310: can't setup GPIO%u (%s), err=%d\n",
gpio, label, err);
return err;
}
static void __init nsa310_gpio_init(void)
{
int err;
err = nsa310_gpio_request(NSA310_GPIO_POWER_OFF, GPIOF_OUT_INIT_LOW,
"Power Off");
if (!err)
pm_power_off = nsa310_power_off;
}
void __init nsa310_init(void)
{
kirkwood_mpp_conf(nsa310_mpp_config);
nsa310_gpio_init();
i2c_register_board_info(0, ARRAY_AND_SIZE(nsa310_i2c_info));
}