OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

fpga: zynq: Add support for encrypted bitstreams 

Add support for encrypted bitstreams. For this to work the system
must be booted in secure mode.

In order for on-the-fly decryption to work, the PCAP clock rate
needs to be lowered via the PCAP_RATE_EN bit.

Signed-off-by: Moritz Fischer <mdf@kernel.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Moritz Fischer 2017-02-27 09:19:01 -06:00 committed by Greg Kroah-Hartman
parent 0f4f0c8ff1
commit 7f33bbca14
1 changed files with 25 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

28
drivers/fpga/zynq-fpga.c
View File

@ -72,6 +72,10 @@
#define CTRL_PCAP_PR_MASK BIT(27)
/* Enable PCAP */
#define CTRL_PCAP_MODE_MASK BIT(26)
/* Lower rate to allow decrypt on the fly */
#define CTRL_PCAP_RATE_EN_MASK BIT(25)
/* System booted in secure mode */
#define CTRL_SEC_EN_MASK BIT(7)
/* Miscellaneous Control Register bit definitions */
/* Internal PCAP loopback */
@ -266,6 +270,17 @@ static int zynq_fpga_ops_write_init(struct fpga_manager *mgr,
if (err)
return err;
/* check if bitstream is encrypted & and system's still secure */
if (info->flags & FPGA_MGR_ENCRYPTED_BITSTREAM) {
ctrl = zynq_fpga_read(priv, CTRL_OFFSET);
if (!(ctrl & CTRL_SEC_EN_MASK)) {
dev_err(&mgr->dev,
"System not secure, can't use crypted bitstreams\n");
err = -EINVAL;
goto out_err;
}
}
/* don't globally reset PL if we're doing partial reconfig */
if (!(info->flags & FPGA_MGR_PARTIAL_RECONFIG)) {
if (!zynq_fpga_has_sync(buf, count)) {
@ -337,12 +352,19 @@ static int zynq_fpga_ops_write_init(struct fpga_manager *mgr,
/* set configuration register with following options:
* - enable PCAP interface
* - set throughput for maximum speed
* - set throughput for maximum speed (if bistream not crypted)
* - set CPU in user mode
*/
ctrl = zynq_fpga_read(priv, CTRL_OFFSET);
zynq_fpga_write(priv, CTRL_OFFSET,
(CTRL_PCAP_PR_MASK | CTRL_PCAP_MODE_MASK | ctrl));
if (info->flags & FPGA_MGR_ENCRYPTED_BITSTREAM)
zynq_fpga_write(priv, CTRL_OFFSET,
(CTRL_PCAP_PR_MASK | CTRL_PCAP_MODE_MASK
| CTRL_PCAP_RATE_EN_MASK | ctrl));
else
zynq_fpga_write(priv, CTRL_OFFSET,
(CTRL_PCAP_PR_MASK | CTRL_PCAP_MODE_MASK
| ctrl));
/* We expect that the command queue is empty right now. */
status = zynq_fpga_read(priv, STATUS_OFFSET);