ASoC: msm8916-wcd-digital: Reset RX interpolation path after use
commit85578bbd64
upstream. For some reason, attempting to route audio through QDSP6 on MSM8916 causes the RX interpolation path to get "stuck" after playing audio a few times. In this situation, the analog codec part is still working, but the RX path in the digital codec stops working, so you only hear the analog parts powering up. After a reboot everything works again. So far I was not able to reproduce the problem when using lpass-cpu. The downstream kernel driver avoids this by resetting the RX interpolation path after use. In mainline we do something similar for the TX decimator (LPASS_CDC_CLK_TX_RESET_B1_CTL), but the interpolator reset (LPASS_CDC_CLK_RX_RESET_CTL) got lost when the msm8916-wcd driver was split into analog and digital. Fix this problem by adding the reset to msm8916_wcd_digital_enable_interpolator(). Fixes:150db8c5af
("ASoC: codecs: Add msm8916-wcd digital codec") Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20200105102753.83108-1-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
parent
71afd206fb
commit
80c59b8a8a
|
@ -586,6 +586,12 @@ static int msm8916_wcd_digital_enable_interpolator(
|
|||
snd_soc_component_write(component, rx_gain_reg[w->shift],
|
||||
snd_soc_component_read32(component, rx_gain_reg[w->shift]));
|
||||
break;
|
||||
case SND_SOC_DAPM_POST_PMD:
|
||||
snd_soc_component_update_bits(component, LPASS_CDC_CLK_RX_RESET_CTL,
|
||||
1 << w->shift, 1 << w->shift);
|
||||
snd_soc_component_update_bits(component, LPASS_CDC_CLK_RX_RESET_CTL,
|
||||
1 << w->shift, 0x0);
|
||||
break;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
|
Loading…
Reference in New Issue