diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c index 8ac59dc80f23..e5938c791330 100644 --- a/drivers/mmc/core/block.c +++ b/drivers/mmc/core/block.c @@ -2170,6 +2170,7 @@ static void mmc_blk_remove_req(struct mmc_blk_data *md) * from being accepted. */ card = md->queue.card; + queue_flag_set(QUEUE_FLAG_BYPASS, md->queue.queue); blk_set_queue_dying(md->queue.queue); mmc_cleanup_queue(&md->queue); if (md->disk->flags & GENHD_FL_UP) { diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c index 7611fd679f1a..1485530c3592 100644 --- a/drivers/mmc/host/sdhci-of-at91.c +++ b/drivers/mmc/host/sdhci-of-at91.c @@ -31,6 +31,7 @@ #define SDMMC_MC1R 0x204 #define SDMMC_MC1R_DDR BIT(3) +#define SDMMC_MC1R_FCD BIT(7) #define SDMMC_CACR 0x230 #define SDMMC_CACR_CAPWREN BIT(0) #define SDMMC_CACR_KEY (0x46 << 8) @@ -43,6 +44,15 @@ struct sdhci_at91_priv { struct clk *mainck; }; +static void sdhci_at91_set_force_card_detect(struct sdhci_host *host) +{ + u8 mc1r; + + mc1r = readb(host->ioaddr + SDMMC_MC1R); + mc1r |= SDMMC_MC1R_FCD; + writeb(mc1r, host->ioaddr + SDMMC_MC1R); +} + static void sdhci_at91_set_clock(struct sdhci_host *host, unsigned int clock) { u16 clk; @@ -110,10 +120,18 @@ void sdhci_at91_set_uhs_signaling(struct sdhci_host *host, unsigned int timing) sdhci_set_uhs_signaling(host, timing); } +static void sdhci_at91_reset(struct sdhci_host *host, u8 mask) +{ + sdhci_reset(host, mask); + + if (host->mmc->caps & MMC_CAP_NONREMOVABLE) + sdhci_at91_set_force_card_detect(host); +} + static const struct sdhci_ops sdhci_at91_sama5d2_ops = { .set_clock = sdhci_at91_set_clock, .set_bus_width = sdhci_set_bus_width, - .reset = sdhci_reset, + .reset = sdhci_at91_reset, .set_uhs_signaling = sdhci_at91_set_uhs_signaling, .set_power = sdhci_at91_set_power, }; @@ -324,6 +342,21 @@ static int sdhci_at91_probe(struct platform_device *pdev) host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION; } + /* + * If the device attached to the MMC bus is not removable, it is safer + * to set the Force Card Detect bit. People often don't connect the + * card detect signal and use this pin for another purpose. If the card + * detect pin is not muxed to SDHCI controller, a default value is + * used. This value can be different from a SoC revision to another + * one. Problems come when this default value is not card present. To + * avoid this case, if the device is non removable then the card + * detection procedure using the SDMCC_CD signal is bypassed. + * This bit is reset when a software reset for all command is performed + * so we need to implement our own reset function to set back this bit. + */ + if (host->mmc->caps & MMC_CAP_NONREMOVABLE) + sdhci_at91_set_force_card_detect(host); + pm_runtime_put_autosuspend(&pdev->dev); return 0;