video/omap: fix modular build

The framebuffer layer can be a loadable module, which forces
omapfb to be a module as well. However, this breaks the lcd
drivers, which are linked into the omapfb driver but each
have their own module_init() function. To solve this,
we split out the lcd drivers into separate modules and
export omapfb_register_panel, which is the only interface
required between the main omapfb driver and the lcd panel
drivers.

We also have to introduce a new Kconfig symbol for H3, since
that lcd driver has a dependency on TPS65010, which we can
express better in Kconfig than Makefile syntax.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
This commit is contained in:
Arnd Bergmann 2014-04-24 13:28:20 +01:00 committed by Tomi Valkeinen
parent f7200b6834
commit 81c44c2b2c
4 changed files with 22 additions and 11 deletions

View File

@ -39,6 +39,15 @@ config FB_OMAP_LCD_MIPID
the Mobile Industry Processor Interface DBI-C/DCS
specification. (Supported LCDs: Philips LPH8923, Sharp LS041Y3)
config FB_OMAP_LCD_H3
bool "TPS65010 LCD controller on OMAP-H3"
depends on MACH_OMAP_H3
depends on TPS65010
default y
help
Say Y here if you want to have support for the LCD on the
H3 board.
config FB_OMAP_DMA_TUNE
bool "Set DMA SDRAM access priority high"
depends on FB_OMAP

View File

@ -10,17 +10,18 @@ objs-y$(CONFIG_FB_OMAP_LCDC_EXTERNAL) += sossi.o
objs-y$(CONFIG_FB_OMAP_LCDC_HWA742) += hwa742.o
objs-y$(CONFIG_MACH_AMS_DELTA) += lcd_ams_delta.o
objs-y$(CONFIG_MACH_OMAP_H3) += lcd_h3.o
objs-y$(CONFIG_MACH_OMAP_PALMTE) += lcd_palmte.o
objs-y$(CONFIG_MACH_OMAP_PALMTT) += lcd_palmtt.o
objs-y$(CONFIG_MACH_OMAP_PALMZ71) += lcd_palmz71.o
objs-$(CONFIG_ARCH_OMAP16XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1610.o
objs-$(CONFIG_ARCH_OMAP15XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1510.o
objs-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o
lcds-y$(CONFIG_MACH_AMS_DELTA) += lcd_ams_delta.o
lcds-y$(CONFIG_FB_OMAP_LCD_H3) += lcd_h3.o
lcds-y$(CONFIG_MACH_OMAP_PALMTE) += lcd_palmte.o
lcds-y$(CONFIG_MACH_OMAP_PALMTT) += lcd_palmtt.o
lcds-y$(CONFIG_MACH_OMAP_PALMZ71) += lcd_palmz71.o
lcds-$(CONFIG_ARCH_OMAP16XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1610.o
lcds-$(CONFIG_ARCH_OMAP15XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1510.o
lcds-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o
objs-y$(CONFIG_FB_OMAP_LCD_MIPID) += lcd_mipid.o
objs-y$(CONFIG_MACH_HERALD) += lcd_htcherald.o
lcds-y$(CONFIG_FB_OMAP_LCD_MIPID) += lcd_mipid.o
lcds-y$(CONFIG_MACH_HERALD) += lcd_htcherald.o
omapfb-objs := $(objs-yy)
obj-$(CONFIG_FB_OMAP) += $(lcds-yy)

View File

@ -1823,6 +1823,7 @@ void omapfb_register_panel(struct lcd_panel *panel)
if (fbdev_pdev != NULL)
omapfb_do_probe(fbdev_pdev, fbdev_panel);
}
EXPORT_SYMBOL_GPL(omapfb_register_panel);
/* Called when the device is being detached from the driver */
static int omapfb_remove(struct platform_device *pdev)

View File

@ -393,7 +393,7 @@ extern int omap_modify_dma_chain_params(int chain_id,
extern int omap_dma_chain_status(int chain_id);
#endif
#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_FB_OMAP)
#if defined(CONFIG_ARCH_OMAP1) && IS_ENABLED(CONFIG_FB_OMAP)
#include <mach/lcd_dma.h>
#else
static inline int omap_lcd_dma_running(void)