OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

[AVR32] ngw100 i2c-gpio tweaks 

Make the NGW100 bitbang i2c use open drain signaling.

Also, speed it up, so it's closer to 100 kHz ... the code paths seem
to be long enough that the udelay isn't dominating bit times.  The
peak bit rate I observed was around 125 kHz, but that's with large
delays (usually before ACK/NAK) which hold the overall rate down to
around 80 kHz (call it 100 usec/byte on average).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
This commit is contained in:
David Brownell 2007-09-25 07:17:48 -07:00 committed by Haavard Skinnemoen
parent a7ff43b808
commit 82c54f864f
1 changed files with 9 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
arch/avr32/boards/atngw100/setup.c
View File

@ -125,8 +125,11 @@ static struct platform_device ngw_gpio_leds = {
};
static struct i2c_gpio_platform_data i2c_gpio_data = {
.sda_pin = GPIO_PIN_PA(6),
.scl_pin = GPIO_PIN_PA(7),
.sda_pin = GPIO_PIN_PA(6),
.scl_pin = GPIO_PIN_PA(7),
.sda_is_open_drain = 1,
.scl_is_open_drain = 1,
.udelay = 2, /* close to 100 kHz */
};
static struct platform_device i2c_gpio_device = {
@ -162,8 +165,10 @@ static int __init atngw100_init(void)
}
platform_device_register(&ngw_gpio_leds);
at32_select_gpio(i2c_gpio_data.sda_pin, 0);
at32_select_gpio(i2c_gpio_data.scl_pin, 0);
at32_select_gpio(i2c_gpio_data.sda_pin,
AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
at32_select_gpio(i2c_gpio_data.scl_pin,
AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
platform_device_register(&i2c_gpio_device);
return 0;