[media] em28xx: initial support for HAUPPAUGE HVR-930C again

With this patch I try again to add initial support for HVR930C.

Tested only DVB-T, since in Italy Analog service is stopped.

Actually "scan -a0 -f1", find only about 50 channel while 400 should
be available.

[mchehab@redhat.com: Tested with DVB-C and fixed a few whitespace issues]
Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Eddi De Pieri <eddi@depieri.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This commit is contained in:
Eddi De Pieri 2011-11-19 11:37:14 -03:00 committed by Mauro Carvalho Chehab
parent 35621030c0
commit 82e7dbbd4a
6 changed files with 181 additions and 4 deletions

View File

@ -1004,6 +1004,8 @@ static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe)
struct xc5000_priv *priv = fe->tuner_priv;
int ret = 0;
mutex_lock(&xc5000_list_mutex);
if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS) {
ret = xc5000_fwupload(fe);
if (ret != XC_RESULT_SUCCESS)
@ -1023,6 +1025,8 @@ static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe)
/* Default to "CABLE" mode */
ret |= xc_write_reg(priv, XREG_SIGNALSOURCE, XC_RF_MODE_CABLE);
mutex_unlock(&xc5000_list_mutex);
return ret;
}

View File

@ -26,6 +26,8 @@ struct drxk_config {
bool antenna_dvbt;
u16 antenna_gpio;
int chunk_size;
const char *microcode_name;
};

View File

@ -681,7 +681,8 @@ static int init_state(struct drxk_state *state)
state->m_hasOOB = false;
state->m_hasAudio = false;
state->m_ChunkSize = 124;
if (!state->m_ChunkSize)
state->m_ChunkSize = 124;
state->m_oscClockFreq = 0;
state->m_smartAntInverted = false;
@ -6430,6 +6431,7 @@ struct dvb_frontend *drxk_attach(const struct drxk_config *config,
state->no_i2c_bridge = config->no_i2c_bridge;
state->antenna_gpio = config->antenna_gpio;
state->antenna_dvbt = config->antenna_dvbt;
state->m_ChunkSize = config->chunk_size;
/* NOTE: as more UIO bits will be used, add them to the mask */
state->UIO_mask = config->antenna_gpio;

View File

@ -336,6 +336,24 @@ static struct em28xx_reg_seq pctv_460e[] = {
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq hauppauge_930c_gpio[] = {
// xc5000 reset
{EM2874_R80_GPIO, 0x6f, 0xff, 10},
{EM2874_R80_GPIO, 0x4f, 0xff, 10},
{EM2874_R80_GPIO, 0x6f, 0xff, 10},
{EM2874_R80_GPIO, 0x4f, 0xff, 10},
{ -1, -1, -1, -1},
};
#if 0
static struct em28xx_reg_seq hauppauge_930c_digital[] = {
{EM2874_R80_GPIO, 0xf6, 0xff, 10},
{EM2874_R80_GPIO, 0xe6, 0xff, 100},
{EM2874_R80_GPIO, 0xa6, 0xff, 10},
{ -1, -1, -1, -1},
};
#endif
/*
* Board definitions
*/
@ -892,6 +910,19 @@ struct em28xx_board em28xx_boards[] = {
EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
},
[EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = {
.name = "Hauppauge WinTV HVR 930C",
.has_dvb = 1,
//#if 0
// .tuner_type = TUNER_XC5000,
// .tuner_addr = 0x41,
// .dvb_gpio = hauppauge_930c_digital, /* FIXME: probably wrong */
.tuner_gpio = hauppauge_930c_gpio,
//#endif
.i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
},
[EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
.name = "Hauppauge WinTV HVR 900",
.tda9887_conf = TDA9887_PRESENT,
@ -1975,6 +2006,8 @@ struct usb_device_id em28xx_id_table[] = {
.driver_info = EM28174_BOARD_PCTV_290E },
{ USB_DEVICE(0x2013, 0x024c),
.driver_info = EM28174_BOARD_PCTV_460E },
{ USB_DEVICE(0x2040, 0x1605),
.driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C },
{ },
};
MODULE_DEVICE_TABLE(usb, em28xx_id_table);
@ -2028,10 +2061,10 @@ int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
int rc = 0;
struct em28xx *dev = ptr;
if (dev->tuner_type != TUNER_XC2028)
if (dev->tuner_type != TUNER_XC2028 && dev->tuner_type != TUNER_XC5000)
return 0;
if (command != XC2028_TUNER_RESET)
if (command != XC2028_TUNER_RESET && command != XC5000_TUNER_RESET)
return 0;
rc = em28xx_gpio_set(dev, dev->board.tuner_gpio);

View File

@ -316,6 +316,14 @@ struct drxk_config terratec_h5_drxk = {
.microcode_name = "dvb-usb-terratec-h5-drxk.fw",
};
struct drxk_config hauppauge_930c_drxk = {
.adr = 0x29,
.single_master = 1,
.no_i2c_bridge = 1,
.microcode_name = "dvb-usb-hauppauge-hvr930c-drxk.fw",
.chunk_size = 56,
};
static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable)
{
struct em28xx_dvb *dvb = fe->sec_priv;
@ -334,6 +342,90 @@ static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable)
return status;
}
static void hauppauge_hvr930c_init(struct em28xx *dev)
{
int i;
struct em28xx_reg_seq hauppauge_hvr930c_init[] = {
{EM2874_R80_GPIO, 0xff, 0xff, 101}, //11111111
// {0xd , 0xff, 0xff, 101}, //11111111
{EM2874_R80_GPIO, 0xfb, 0xff, 50}, //11111011 init bit 3
{EM2874_R80_GPIO, 0xff, 0xff, 184}, //11111111
{ -1, -1, -1, -1},
};
struct em28xx_reg_seq hauppauge_hvr930c_end[] = {
{EM2874_R80_GPIO, 0xef, 0xff, 1}, //11101111
{EM2874_R80_GPIO, 0xaf, 0xff, 101}, //10101111 init bit 7
{EM2874_R80_GPIO, 0xef, 0xff, 118}, //11101111
//per il tuner?
{EM2874_R80_GPIO, 0xef, 0xff, 1}, //11101111
{EM2874_R80_GPIO, 0xcf, 0xff, 11}, //11001111 init bit 6
{EM2874_R80_GPIO, 0xef, 0xff, 64}, //11101111
{EM2874_R80_GPIO, 0xcf, 0xff, 101}, //11001111 init bit 6
{EM2874_R80_GPIO, 0xef, 0xff, 101}, //11101111
{EM2874_R80_GPIO, 0xcf, 0xff, 11}, //11001111 init bit 6
{EM2874_R80_GPIO, 0xef, 0xff, 101}, //11101111
// {EM2874_R80_GPIO, 0x6f, 0xff, 10}, //01101111
// {EM2874_R80_GPIO, 0x6d, 0xff, 100}, //01101101 init bit 2
{ -1, -1, -1, -1},
};
struct em28xx_reg_seq hauppauge_hvr930c_end2[] = {
// {EM2874_R80_GPIO, 0x6f, 0xff, 124}, //01101111
// {EM2874_R80_GPIO, 0x4f, 0xff, 11}, //01001111 init bit 6
// {EM2874_R80_GPIO, 0x6f, 0xff, 1}, //01101111
// {EM2874_R80_GPIO, 0x4f, 0xff, 10}, //01001111 init bit 6
// {EM2874_R80_GPIO, 0x6f, 0xff, 100}, //01101111
// {0xd , 0x42, 0xff, 101}, //11111111
{ -1, -1, -1, -1},
};
struct {
unsigned char r[4];
int len;
} regs[] = {
{{ 0x06, 0x02, 0x00, 0x31 }, 4},
{{ 0x01, 0x02 }, 2},
{{ 0x01, 0x02, 0x00, 0xc6 }, 4},
{{ 0x01, 0x00 }, 2},
{{ 0x01, 0x00, 0xff, 0xaf }, 4},
{{ 0x01, 0x00, 0x03, 0xa0 }, 4},
{{ 0x01, 0x00 }, 2},
{{ 0x01, 0x00, 0x73, 0xaf }, 4},
{{ 0x04, 0x00 }, 2},
{{ 0x00, 0x04 }, 2},
{{ 0x00, 0x04, 0x00, 0x0a }, 4},
{{ 0x04, 0x14 }, 2},
{{ 0x04, 0x14, 0x00, 0x00 }, 4},
};
em28xx_gpio_set(dev, hauppauge_hvr930c_init);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40);
msleep(10);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x44);
msleep(10);
dev->i2c_client.addr = 0x82 >> 1;
for (i = 0; i < ARRAY_SIZE(regs); i++)
i2c_master_send(&dev->i2c_client, regs[i].r, regs[i].len);
em28xx_gpio_set(dev, hauppauge_hvr930c_end);
msleep(100);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x44);
msleep(30);
em28xx_gpio_set(dev, hauppauge_hvr930c_end2);
msleep(10);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x45);
msleep(10);
}
static void terratec_h5_init(struct em28xx *dev)
{
int i;
@ -787,6 +879,47 @@ static int em28xx_dvb_init(struct em28xx *dev)
mfe_shared = 1;
}
break;
case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C:
hauppauge_hvr930c_init(dev);
dvb->dont_attach_fe1 = 1;
dvb->fe[0] = dvb_attach(drxk_attach, &hauppauge_930c_drxk, &dev->i2c_adap, &dvb->fe[1]);
if (!dvb->fe[0]) {
result = -EINVAL;
goto out_free;
}
/* FIXME: do we need a pll semaphore? */
dvb->fe[0]->sec_priv = dvb;
sema_init(&dvb->pll_mutex, 1);
dvb->gate_ctrl = dvb->fe[0]->ops.i2c_gate_ctrl;
dvb->fe[0]->ops.i2c_gate_ctrl = drxk_gate_ctrl;
dvb->fe[1]->id = 1;
/* Attach xc5000 */
struct xc5000_config cfg;
memset(&cfg, 0, sizeof(cfg));
cfg.i2c_address = 0x61;
//cfg.if_khz = 4570; //FIXME
cfg.if_khz = 4000; //FIXME (should be ok) read from i2c traffic
if (dvb->fe[0]->ops.i2c_gate_ctrl)
dvb->fe[0]->ops.i2c_gate_ctrl(dvb->fe[0], 1);
if (!dvb_attach(xc5000_attach, dvb->fe[0], &dev->i2c_adap, &cfg)) {
result = -EINVAL;
goto out_free;
}
if (dvb->fe[0]->ops.i2c_gate_ctrl)
dvb->fe[0]->ops.i2c_gate_ctrl(dvb->fe[0], 0);
/* Hack - needed by drxk/tda18271c2dd */
dvb->fe[1]->tuner_priv = dvb->fe[0]->tuner_priv;
memcpy(&dvb->fe[1]->ops.tuner_ops,
&dvb->fe[0]->ops.tuner_ops,
sizeof(dvb->fe[0]->ops.tuner_ops));
break;
case EM2884_BOARD_TERRATEC_H5:
terratec_h5_init(dev);
@ -798,7 +931,6 @@ static int em28xx_dvb_init(struct em28xx *dev)
result = -EINVAL;
goto out_free;
}
/* FIXME: do we need a pll semaphore? */
dvb->fe[0]->sec_priv = dvb;
sema_init(&dvb->pll_mutex, 1);
@ -845,6 +977,8 @@ static int em28xx_dvb_init(struct em28xx *dev)
}
/* define general-purpose callback pointer */
dvb->fe[0]->callback = em28xx_tuner_callback;
if (dvb->fe[1])
dvb->fe[1]->callback = em28xx_tuner_callback;
/* register everything */
result = em28xx_register_dvb(dvb, THIS_MODULE, dev, &dev->udev->dev);

View File

@ -38,6 +38,7 @@
#include <media/videobuf-dvb.h>
#endif
#include "tuner-xc2028.h"
#include "xc5000.h"
#include "em28xx-reg.h"
/* Boards supported by driver */
@ -121,6 +122,7 @@
#define EM28174_BOARD_PCTV_290E 78
#define EM2884_BOARD_TERRATEC_H5 79
#define EM28174_BOARD_PCTV_460E 80
#define EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C 81
/* Limits minimum and default number of buffers */
#define EM28XX_MIN_BUF 4