[ISDN] Hisax: eliminate many unnecessary references to CardType[]

For the vast majority of CardType[card->typ] uses (but not all!),
the string is constant for each driver.  Therefore, we may replace
CardType[card->typ] with the actual string describing the driver, making
each printk() a bit more simple.

This also has the nice, intended side effect of greatly reducing
external references to hisax global CardType[].  This will be of value
once the ISDN drivers are converted to the ISA/PCI/PNP hotplug APIs.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
This commit is contained in:
Jeff Garzik 2007-10-31 03:42:07 -04:00 committed by Jeff Garzik
parent d38c8475b4
commit 8349304d12
20 changed files with 70 additions and 120 deletions

View File

@ -20,8 +20,6 @@
#include "hscx.h"
#include "isdnl1.h"
extern const char *CardType[];
static const char *Asuscom_revision = "$Revision: 1.14.2.4 $";
#define byteout(addr,val) outb(val,addr)
@ -376,8 +374,7 @@ setup_asuscom(struct IsdnCard *card)
cs->irq = card->para[0];
if (!request_region(cs->hw.asus.cfg_reg, bytecnt, "asuscom isdn")) {
printk(KERN_WARNING
"HiSax: %s config port %x-%x already in use\n",
CardType[card->typ],
"HiSax: ISDNLink config port %x-%x already in use\n",
cs->hw.asus.cfg_reg,
cs->hw.asus.cfg_reg + bytecnt);
return (0);

View File

@ -16,7 +16,6 @@
#include "hscx.h"
#include "isdnl1.h"
extern const char *CardType[];
static const char *avm_revision = "$Revision: 2.15.2.4 $";
#define AVM_A1_STAT_ISAC 0x01
@ -200,16 +199,14 @@ setup_avm_a1(struct IsdnCard *card)
cs->irq = card->para[0];
if (!request_region(cs->hw.avm.cfg_reg, 8, "avm cfg")) {
printk(KERN_WARNING
"HiSax: %s config port %x-%x already in use\n",
CardType[card->typ],
"HiSax: AVM A1 config port %x-%x already in use\n",
cs->hw.avm.cfg_reg,
cs->hw.avm.cfg_reg + 8);
return (0);
}
if (!request_region(cs->hw.avm.isac + 32, 32, "HiSax isac")) {
printk(KERN_WARNING
"HiSax: %s isac ports %x-%x already in use\n",
CardType[cs->typ],
"HiSax: AVM A1 isac ports %x-%x already in use\n",
cs->hw.avm.isac + 32,
cs->hw.avm.isac + 64);
release_ioregs(cs, 0);
@ -217,16 +214,14 @@ setup_avm_a1(struct IsdnCard *card)
}
if (!request_region(cs->hw.avm.isacfifo, 1, "HiSax isac fifo")) {
printk(KERN_WARNING
"HiSax: %s isac fifo port %x already in use\n",
CardType[cs->typ],
"HiSax: AVM A1 isac fifo port %x already in use\n",
cs->hw.avm.isacfifo);
release_ioregs(cs, 1);
return (0);
}
if (!request_region(cs->hw.avm.hscx[0] + 32, 32, "HiSax hscx A")) {
printk(KERN_WARNING
"HiSax: %s hscx A ports %x-%x already in use\n",
CardType[cs->typ],
"HiSax: AVM A1 hscx A ports %x-%x already in use\n",
cs->hw.avm.hscx[0] + 32,
cs->hw.avm.hscx[0] + 64);
release_ioregs(cs, 3);
@ -234,16 +229,14 @@ setup_avm_a1(struct IsdnCard *card)
}
if (!request_region(cs->hw.avm.hscxfifo[0], 1, "HiSax hscx A fifo")) {
printk(KERN_WARNING
"HiSax: %s hscx A fifo port %x already in use\n",
CardType[cs->typ],
"HiSax: AVM A1 hscx A fifo port %x already in use\n",
cs->hw.avm.hscxfifo[0]);
release_ioregs(cs, 7);
return (0);
}
if (!request_region(cs->hw.avm.hscx[1] + 32, 32, "HiSax hscx B")) {
printk(KERN_WARNING
"HiSax: %s hscx B ports %x-%x already in use\n",
CardType[cs->typ],
"HiSax: AVM A1 hscx B ports %x-%x already in use\n",
cs->hw.avm.hscx[1] + 32,
cs->hw.avm.hscx[1] + 64);
release_ioregs(cs, 0xf);
@ -251,8 +244,7 @@ setup_avm_a1(struct IsdnCard *card)
}
if (!request_region(cs->hw.avm.hscxfifo[1], 1, "HiSax hscx B fifo")) {
printk(KERN_WARNING
"HiSax: %s hscx B fifo port %x already in use\n",
CardType[cs->typ],
"HiSax: AVM A1 hscx B fifo port %x already in use\n",
cs->hw.avm.hscxfifo[1]);
release_ioregs(cs, 0x1f);
return (0);
@ -284,9 +276,8 @@ setup_avm_a1(struct IsdnCard *card)
printk(KERN_INFO "AVM A1: Byte at %x is %x\n",
cs->hw.avm.cfg_reg, val);
printk(KERN_INFO
"HiSax: %s config irq:%d cfg:0x%X\n",
CardType[cs->typ], cs->irq,
printk(KERN_INFO "HiSax: AVM A1 config irq:%d cfg:0x%X\n",
cs->irq,
cs->hw.avm.cfg_reg);
printk(KERN_INFO
"HiSax: isac:0x%X/0x%X\n",

View File

@ -20,8 +20,6 @@
#include <linux/pci.h>
#include "bkm_ax.h"
extern const char *CardType[];
static const char *bkm_a4t_revision = "$Revision: 1.22.2.4 $";
@ -284,15 +282,16 @@ static int __devinit a4t_cs_init(struct IsdnCard *card,
I20_REGISTER_FILE *pI20_Regs;
if (!cs->irq) { /* IRQ range check ?? */
printk(KERN_WARNING "HiSax: %s: No IRQ\n", CardType[card->typ]);
printk(KERN_WARNING "HiSax: Telekom A4T: No IRQ\n");
return (0);
}
cs->hw.ax.base = (long) ioremap(pci_memaddr, 4096);
/* Check suspecious address */
pI20_Regs = (I20_REGISTER_FILE *) (cs->hw.ax.base);
if ((pI20_Regs->i20IntStatus & 0x8EFFFFFF) != 0) {
printk(KERN_WARNING "HiSax: %s address %lx-%lx suspecious\n",
CardType[card->typ], cs->hw.ax.base, cs->hw.ax.base + 4096);
printk(KERN_WARNING "HiSax: Telekom A4T address "
"%lx-%lx suspicious\n",
cs->hw.ax.base, cs->hw.ax.base + 4096);
iounmap((void *) cs->hw.ax.base);
cs->hw.ax.base = 0;
return (0);
@ -302,8 +301,9 @@ static int __devinit a4t_cs_init(struct IsdnCard *card,
cs->hw.ax.isac_ale = GCS_1;
cs->hw.ax.jade_ale = GCS_3;
printk(KERN_INFO "HiSax: %s: Card configured at 0x%lX IRQ %d\n",
CardType[card->typ], cs->hw.ax.base, cs->irq);
printk(KERN_INFO "HiSax: Telekom A4T: Card configured at "
"0x%lX IRQ %d\n",
cs->hw.ax.base, cs->irq);
setup_isac(cs);
cs->readisac = &ReadISAC;
@ -349,11 +349,12 @@ setup_bkm_a4t(struct IsdnCard *card)
break;
}
if (!found) {
printk(KERN_WARNING "HiSax: %s: Card not found\n", CardType[card->typ]);
printk(KERN_WARNING "HiSax: Telekom A4T: Card not found\n");
return (0);
}
if (!pci_memaddr) {
printk(KERN_WARNING "HiSax: %s: No Memory base address\n", CardType[card->typ]);
printk(KERN_WARNING "HiSax: Telekom A4T: "
"No Memory base address\n");
return (0);
}

View File

@ -22,8 +22,6 @@
#define ATTEMPT_PCI_REMAPPING /* Required for PLX rev 1 */
extern const char *CardType[];
static const char sct_quadro_revision[] = "$Revision: 1.22.2.4 $";
static const char *sct_quadro_subtypes[] =
@ -181,8 +179,7 @@ bkm_interrupt_ipac(int intno, void *dev_id)
goto Start_IPAC;
}
if (!icnt)
printk(KERN_WARNING "HiSax: %s (%s) IRQ LOOP\n",
CardType[cs->typ],
printk(KERN_WARNING "HiSax: Scitel Quadro (%s) IRQ LOOP\n",
sct_quadro_subtypes[cs->subtyp]);
writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK, 0xFF);
writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK, 0xC0);
@ -296,8 +293,8 @@ setup_sct_quadro(struct IsdnCard *card)
if (card->para[0] >= SCT_1 && card->para[0] <= SCT_4)
cs->subtyp = card->para[0];
else {
printk(KERN_WARNING "HiSax: %s: Invalid subcontroller in configuration, default to 1\n",
CardType[card->typ]);
printk(KERN_WARNING "HiSax: Scitel Quadro: Invalid "
"subcontroller in configuration, default to 1\n");
return (0);
}
if ((cs->subtyp != SCT_1) && ((sub_sys_id != PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO) ||
@ -322,16 +319,16 @@ setup_sct_quadro(struct IsdnCard *card)
}
}
if (!found) {
printk(KERN_WARNING "HiSax: %s (%s): Card not found\n",
CardType[card->typ],
printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
"Card not found\n",
sct_quadro_subtypes[cs->subtyp]);
return (0);
}
#ifdef ATTEMPT_PCI_REMAPPING
/* HACK: PLX revision 1 bug: PLX address bit 7 must not be set */
if ((pci_ioaddr1 & 0x80) && (dev_a8->revision == 1)) {
printk(KERN_WARNING "HiSax: %s (%s): PLX rev 1, remapping required!\n",
CardType[card->typ],
printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
"PLX rev 1, remapping required!\n",
sct_quadro_subtypes[cs->subtyp]);
/* Restart PCI negotiation */
pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, (u_int) - 1);
@ -344,8 +341,7 @@ setup_sct_quadro(struct IsdnCard *card)
#endif /* End HACK */
}
if (!pci_irq) { /* IRQ range check ?? */
printk(KERN_WARNING "HiSax: %s (%s): No IRQ\n",
CardType[card->typ],
printk(KERN_WARNING "HiSax: Scitel Quadro (%s): No IRQ\n",
sct_quadro_subtypes[cs->subtyp]);
return (0);
}
@ -355,8 +351,8 @@ setup_sct_quadro(struct IsdnCard *card)
pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_4, &pci_ioaddr4);
pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_5, &pci_ioaddr5);
if (!pci_ioaddr1 || !pci_ioaddr2 || !pci_ioaddr3 || !pci_ioaddr4 || !pci_ioaddr5) {
printk(KERN_WARNING "HiSax: %s (%s): No IO base address(es)\n",
CardType[card->typ],
printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
"No IO base address(es)\n",
sct_quadro_subtypes[cs->subtyp]);
return (0);
}
@ -411,8 +407,8 @@ setup_sct_quadro(struct IsdnCard *card)
/* For isac and hscx data path */
cs->hw.ax.data_adr = cs->hw.ax.base + 4;
printk(KERN_INFO "HiSax: %s (%s) configured at 0x%.4lX, 0x%.4lX, 0x%.4lX and IRQ %d\n",
CardType[card->typ],
printk(KERN_INFO "HiSax: Scitel Quadro (%s) configured at "
"0x%.4lX, 0x%.4lX, 0x%.4lX and IRQ %d\n",
sct_quadro_subtypes[cs->subtyp],
cs->hw.ax.plx_adr,
cs->hw.ax.base,
@ -432,8 +428,7 @@ setup_sct_quadro(struct IsdnCard *card)
cs->cardmsg = &BKM_card_msg;
cs->irq_func = &bkm_interrupt_ipac;
printk(KERN_INFO "HiSax: %s (%s): IPAC Version %d\n",
CardType[card->typ],
printk(KERN_INFO "HiSax: Scitel Quadro (%s): IPAC Version %d\n",
sct_quadro_subtypes[cs->subtyp],
readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ID));
return (1);

View File

@ -19,7 +19,6 @@
#include "ipac.h"
#include <linux/pci.h>
extern const char *CardType[];
static const char *gazel_revision = "$Revision: 2.19.2.4 $";
#define R647 1
@ -479,8 +478,8 @@ reserve_regions(struct IsdnCard *card, struct IsdnCardState *cs)
return 0;
error:
printk(KERN_WARNING "Gazel: %s io ports 0x%x-0x%x already in use\n",
CardType[cs->typ], adr, adr + len);
printk(KERN_WARNING "Gazel: io ports 0x%x-0x%x already in use\n",
adr, adr + len);
return 1;
}

View File

@ -22,8 +22,6 @@
#include <linux/pci.h>
#include <linux/interrupt.h>
extern const char *CardType[];
static const char *hfcpci_revision = "$Revision: 1.48.2.4 $";
/* table entry in the PCI devices list */

View File

@ -18,8 +18,6 @@
#include <linux/interrupt.h>
#include <linux/isapnp.h>
extern const char *CardType[];
static const char *hfcsx_revision = "$Revision: 1.12.2.5 $";
/***************************************/

View File

@ -17,8 +17,6 @@
#include "isdnl1.h"
#include <linux/isapnp.h>
extern const char *CardType[];
static const char *ISurf_revision = "$Revision: 1.12.2.4 $";
#define byteout(addr,val) outb(val,addr)
@ -251,22 +249,19 @@ setup_isurf(struct IsdnCard *card)
return(0);
}
#else
printk(KERN_WARNING "HiSax: %s port/mem not set\n",
CardType[card->typ]);
printk(KERN_WARNING "HiSax: Siemens I-Surf port/mem not set\n");
return (0);
#endif
}
if (!request_region(cs->hw.isurf.reset, 1, "isurf isdn")) {
printk(KERN_WARNING
"HiSax: %s config port %x already in use\n",
CardType[card->typ],
"HiSax: Siemens I-Surf config port %x already in use\n",
cs->hw.isurf.reset);
return (0);
}
if (!request_region(cs->hw.isurf.phymem, ISURF_IOMEM_SIZE, "isurf iomem")) {
printk(KERN_WARNING
"HiSax: %s memory region %lx-%lx already in use\n",
CardType[card->typ],
printk(KERN_WARNING "HiSax: Siemens I-Surf memory region "
"%lx-%lx already in use\n",
cs->hw.isurf.phymem,
cs->hw.isurf.phymem + ISURF_IOMEM_SIZE);
release_region(cs->hw.isurf.reset, 1);

View File

@ -24,7 +24,6 @@
#include "hscx.h"
#include "isdnl1.h"
extern const char *CardType[];
static const char *ix1_revision = "$Revision: 2.12.2.4 $";
#define byteout(addr,val) outb(val,addr)
@ -288,15 +287,15 @@ setup_ix1micro(struct IsdnCard *card)
if (cs->hw.ix1.cfg_reg) {
if (!request_region(cs->hw.ix1.cfg_reg, 4, "ix1micro cfg")) {
printk(KERN_WARNING
"HiSax: %s config port %x-%x already in use\n",
CardType[card->typ],
"HiSax: ITK ix1-micro Rev.2 config port "
"%x-%x already in use\n",
cs->hw.ix1.cfg_reg,
cs->hw.ix1.cfg_reg + 4);
return (0);
}
}
printk(KERN_INFO "HiSax: %s config irq:%d io:0x%X\n",
CardType[cs->typ], cs->irq, cs->hw.ix1.cfg_reg);
printk(KERN_INFO "HiSax: ITK ix1-micro Rev.2 config irq:%d io:0x%X\n",
cs->irq, cs->hw.ix1.cfg_reg);
setup_isac(cs);
cs->readisac = &ReadISAC;
cs->writeisac = &WriteISAC;

View File

@ -16,8 +16,6 @@
#include "hscx.h"
#include "isdnl1.h"
extern const char *CardType[];
static const char *mic_revision = "$Revision: 1.12.2.4 $";
#define byteout(addr,val) outb(val,addr)
@ -210,8 +208,7 @@ setup_mic(struct IsdnCard *card)
if (!request_region(cs->hw.mic.cfg_reg, bytecnt, "mic isdn")) {
printk(KERN_WARNING
"HiSax: %s config port %x-%x already in use\n",
CardType[card->typ],
"HiSax: ith mic config port %x-%x already in use\n",
cs->hw.mic.cfg_reg,
cs->hw.mic.cfg_reg + bytecnt);
return (0);

View File

@ -12,8 +12,6 @@
*
*/
extern const char *CardType[];
#define byteout(addr,val) outb(val,addr)
#define bytein(addr) inb(addr)

View File

@ -21,7 +21,6 @@
#include <linux/pci.h>
#include <linux/isapnp.h>
extern const char *CardType[];
static const char *niccy_revision = "$Revision: 1.21.2.4 $";
#define byteout(addr,val) outb(val,addr)
@ -284,14 +283,14 @@ int __devinit setup_niccy(struct IsdnCard *card)
cs->subtyp = NICCY_PNP;
cs->irq = card->para[0];
if (!request_region(cs->hw.niccy.isac, 2, "niccy data")) {
printk(KERN_WARNING "HiSax: %s data port %x-%x "
"already in use\n", CardType[card->typ],
printk(KERN_WARNING "HiSax: NICCY data port %x-%x "
"already in use\n",
cs->hw.niccy.isac, cs->hw.niccy.isac + 1);
return 0;
}
if (!request_region(cs->hw.niccy.isac_ale, 2, "niccy addr")) {
printk(KERN_WARNING "HiSax: %s address port %x-%x "
"already in use\n", CardType[card->typ],
printk(KERN_WARNING "HiSax: NICCY address port %x-%x "
"already in use\n",
cs->hw.niccy.isac_ale,
cs->hw.niccy.isac_ale + 1);
release_region(cs->hw.niccy.isac, 2);
@ -339,15 +338,13 @@ int __devinit setup_niccy(struct IsdnCard *card)
cs->hw.niccy.hscx_ale = pci_ioaddr + HSCX_PCI_ADDR;
if (!request_region(cs->hw.niccy.isac, 4, "niccy")) {
printk(KERN_WARNING
"HiSax: %s data port %x-%x already in use\n",
CardType[card->typ],
"HiSax: NICCY data port %x-%x already in use\n",
cs->hw.niccy.isac, cs->hw.niccy.isac + 4);
return 0;
}
if (!request_region(cs->hw.niccy.cfg_reg, 0x40, "niccy pci")) {
printk(KERN_WARNING
"HiSax: %s pci port %x-%x already in use\n",
CardType[card->typ],
"HiSax: NICCY pci port %x-%x already in use\n",
cs->hw.niccy.cfg_reg,
cs->hw.niccy.cfg_reg + 0x40);
release_region(cs->hw.niccy.isac, 4);
@ -359,8 +356,8 @@ int __devinit setup_niccy(struct IsdnCard *card)
return 0;
#endif /* CONFIG_PCI_LEGACY */
}
printk(KERN_INFO "HiSax: %s %s config irq:%d data:0x%X ale:0x%X\n",
CardType[cs->typ], (cs->subtyp == 1) ? "PnP" : "PCI",
printk(KERN_INFO "HiSax: NICCY %s config irq:%d data:0x%X ale:0x%X\n",
(cs->subtyp == 1) ? "PnP" : "PCI",
cs->irq, cs->hw.niccy.isac, cs->hw.niccy.isac_ale);
setup_isac(cs);
cs->readisac = &ReadISAC;

View File

@ -235,8 +235,7 @@ static int __devinit njs_cs_init_rest(struct IsdnCard *card,
cs->subtyp ? "TJ320" : "TJ300", cs->hw.njet.base, cs->irq);
if (!request_region(cs->hw.njet.base, bytecnt, "netjet-s isdn")) {
printk(KERN_WARNING
"HiSax: %s config port %#lx-%#lx already in use\n",
CardType[card->typ],
"HiSax: NETjet-S config port %#lx-%#lx already in use\n",
cs->hw.njet.base,
cs->hw.njet.base + bytecnt);
return (0);

View File

@ -197,8 +197,8 @@ static int __devinit nju_cs_init_rest(struct IsdnCard *card,
cs->hw.njet.base, cs->irq);
if (!request_region(cs->hw.njet.base, bytecnt, "netspider-u isdn")) {
printk(KERN_WARNING
"HiSax: %s config port %#lx-%#lx already in use\n",
CardType[card->typ],
"HiSax: NETspider-U config port %#lx-%#lx "
"already in use\n",
cs->hw.njet.base,
cs->hw.njet.base + bytecnt);
return (0);

View File

@ -16,7 +16,6 @@
#include "hscx.h"
#include "isdnl1.h"
extern const char *CardType[];
static const char *s0box_revision = "$Revision: 2.6.2.4 $";
static inline void
@ -231,19 +230,15 @@ setup_s0box(struct IsdnCard *card)
cs->hw.teles3.hscxfifo[1] = cs->hw.teles3.hscx[1] + 0x3e;
cs->irq = card->para[0];
if (!request_region(cs->hw.teles3.cfg_reg,8, "S0Box parallel I/O")) {
printk(KERN_WARNING
"HiSax: %s ports %x-%x already in use\n",
CardType[cs->typ],
printk(KERN_WARNING "HiSax: S0Box ports %x-%x already in use\n",
cs->hw.teles3.cfg_reg,
cs->hw.teles3.cfg_reg + 7);
return 0;
}
printk(KERN_INFO
"HiSax: %s config irq:%d isac:0x%x cfg:0x%x\n",
CardType[cs->typ], cs->irq,
printk(KERN_INFO "HiSax: S0Box config irq:%d isac:0x%x cfg:0x%x\n",
cs->irq,
cs->hw.teles3.isac, cs->hw.teles3.cfg_reg);
printk(KERN_INFO
"HiSax: hscx A:0x%x hscx B:0x%x\n",
printk(KERN_INFO "HiSax: hscx A:0x%x hscx B:0x%x\n",
cs->hw.teles3.hscx[0], cs->hw.teles3.hscx[1]);
setup_isac(cs);
cs->readisac = &ReadISAC;

View File

@ -18,7 +18,6 @@
#include "hscx.h"
#include "isdnl1.h"
extern const char *CardType[];
static char *saphir_rev = "$Revision: 1.10.2.4 $";
#define byteout(addr,val) outb(val,addr)
@ -260,15 +259,14 @@ setup_saphir(struct IsdnCard *card)
cs->irq = card->para[0];
if (!request_region(cs->hw.saphir.cfg_reg, 6, "saphir")) {
printk(KERN_WARNING
"HiSax: %s config port %x-%x already in use\n",
CardType[card->typ],
"HiSax: HST Saphir config port %x-%x already in use\n",
cs->hw.saphir.cfg_reg,
cs->hw.saphir.cfg_reg + 5);
return (0);
}
printk(KERN_INFO "HiSax: %s config irq:%d io:0x%X\n",
CardType[cs->typ], cs->irq, cs->hw.saphir.cfg_reg);
printk(KERN_INFO "HiSax: HST Saphir config irq:%d io:0x%X\n",
cs->irq, cs->hw.saphir.cfg_reg);
setup_isac(cs);
cs->hw.saphir.timer.function = (void *) SaphirWatchDog;

View File

@ -18,7 +18,6 @@
#include "hscx.h"
#include "isdnl1.h"
extern const char *CardType[];
static const char *sportster_revision = "$Revision: 1.16.2.4 $";
#define byteout(addr,val) outb(val,addr)
@ -192,9 +191,9 @@ get_io_range(struct IsdnCardState *cs)
for (i=0;i<64;i++) {
adr = cs->hw.spt.cfg_reg + i *1024;
if (!request_region(adr, 8, "sportster")) {
printk(KERN_WARNING
"HiSax: %s config port %x-%x already in use\n",
CardType[cs->typ], adr, adr + 8);
printk(KERN_WARNING "HiSax: USR Sportster config port "
"%x-%x already in use\n",
adr, adr + 8);
break;
}
}
@ -247,8 +246,8 @@ setup_sportster(struct IsdnCard *card)
printk(KERN_WARNING "Sportster: wrong IRQ\n");
return(0);
}
printk(KERN_INFO "HiSax: %s config irq:%d cfg:0x%X\n",
CardType[cs->typ], cs->irq, cs->hw.spt.cfg_reg);
printk(KERN_INFO "HiSax: USR Sportster config irq:%d cfg:0x%X\n",
cs->irq, cs->hw.spt.cfg_reg);
setup_isac(cs);
cs->readisac = &ReadISAC;
cs->writeisac = &WriteISAC;

View File

@ -16,8 +16,6 @@
#include "hfc_2bs0.h"
#include "isdnl1.h"
extern const char *CardType[];
static const char *TeleInt_revision = "$Revision: 1.16.2.5 $";
#define byteout(addr,val) outb(val,addr)
@ -286,8 +284,7 @@ setup_TeleInt(struct IsdnCard *card)
init_timer(&cs->hw.hfc.timer);
if (!request_region(cs->hw.hfc.addr, 2, "TeleInt isdn")) {
printk(KERN_WARNING
"HiSax: %s config port %x-%x already in use\n",
CardType[card->typ],
"HiSax: TeleInt config port %x-%x already in use\n",
cs->hw.hfc.addr,
cs->hw.hfc.addr + 2);
return (0);

View File

@ -19,7 +19,6 @@
#include "isdnl1.h"
#include <linux/pci.h>
extern const char *CardType[];
static const char *telespci_revision = "$Revision: 2.23.2.3 $";
#define ZORAN_PO_RQ_PEN 0x02000000
@ -329,8 +328,8 @@ setup_telespci(struct IsdnCard *card)
/* writel(0x00800000, cs->hw.teles0.membase + 0x200); */
printk(KERN_INFO
"HiSax: %s config irq:%d mem:%p\n",
CardType[cs->typ], cs->irq,
"HiSax: Teles PCI config irq:%d mem:%p\n",
cs->irq,
cs->hw.teles0.membase);
setup_isac(cs);

View File

@ -38,8 +38,6 @@ static const PCI_ENTRY id_list[] =
#define W6692_DYNALINK 1
#define W6692_USR 2
extern const char *CardType[];
static const char *w6692_revision = "$Revision: 1.18.2.4 $";
#define DBUSY_TIMER_VALUE 80