Merge 4.18-rc5 into char-misc-next
We want the char-misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
commit
83cf9cd6d5
|
@ -4846,3 +4846,8 @@
|
|||
xirc2ps_cs= [NET,PCMCIA]
|
||||
Format:
|
||||
<irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]]
|
||||
|
||||
xhci-hcd.quirks [USB,KNL]
|
||||
A hex value specifying bitmask with supplemental xhci
|
||||
host controller quirks. Meaning of each bit can be
|
||||
consulted in header drivers/usb/host/xhci.h.
|
||||
|
|
|
@ -324,8 +324,7 @@ Global Attributes
|
|||
|
||||
``intel_pstate`` exposes several global attributes (files) in ``sysfs`` to
|
||||
control its functionality at the system level. They are located in the
|
||||
``/sys/devices/system/cpu/cpufreq/intel_pstate/`` directory and affect all
|
||||
CPUs.
|
||||
``/sys/devices/system/cpu/intel_pstate/`` directory and affect all CPUs.
|
||||
|
||||
Some of them are not present if the ``intel_pstate=per_cpu_perf_limits``
|
||||
argument is passed to the kernel in the command line.
|
||||
|
@ -379,6 +378,17 @@ argument is passed to the kernel in the command line.
|
|||
but it affects the maximum possible value of per-policy P-state limits
|
||||
(see `Interpretation of Policy Attributes`_ below for details).
|
||||
|
||||
``hwp_dynamic_boost``
|
||||
This attribute is only present if ``intel_pstate`` works in the
|
||||
`active mode with the HWP feature enabled <Active Mode With HWP_>`_ in
|
||||
the processor. If set (equal to 1), it causes the minimum P-state limit
|
||||
to be increased dynamically for a short time whenever a task previously
|
||||
waiting on I/O is selected to run on a given logical CPU (the purpose
|
||||
of this mechanism is to improve performance).
|
||||
|
||||
This setting has no effect on logical CPUs whose minimum P-state limit
|
||||
is directly set to the highest non-turbo P-state or above it.
|
||||
|
||||
.. _status_attr:
|
||||
|
||||
``status``
|
||||
|
|
|
@ -0,0 +1,23 @@
|
|||
Spreadtrum SC27xx PMIC Vibrator
|
||||
|
||||
Required properties:
|
||||
- compatible: should be "sprd,sc2731-vibrator".
|
||||
- reg: address of vibrator control register.
|
||||
|
||||
Example :
|
||||
|
||||
sc2731_pmic: pmic@0 {
|
||||
compatible = "sprd,sc2731";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <26000000>;
|
||||
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
vibrator@eb4 {
|
||||
compatible = "sprd,sc2731-vibrator";
|
||||
reg = <0xeb4>;
|
||||
};
|
||||
};
|
|
@ -441,8 +441,6 @@ prototypes:
|
|||
int (*iterate) (struct file *, struct dir_context *);
|
||||
int (*iterate_shared) (struct file *, struct dir_context *);
|
||||
__poll_t (*poll) (struct file *, struct poll_table_struct *);
|
||||
struct wait_queue_head * (*get_poll_head)(struct file *, __poll_t);
|
||||
__poll_t (*poll_mask) (struct file *, __poll_t);
|
||||
long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
|
||||
long (*compat_ioctl) (struct file *, unsigned int, unsigned long);
|
||||
int (*mmap) (struct file *, struct vm_area_struct *);
|
||||
|
@ -473,7 +471,7 @@ prototypes:
|
|||
};
|
||||
|
||||
locking rules:
|
||||
All except for ->poll_mask may block.
|
||||
All may block.
|
||||
|
||||
->llseek() locking has moved from llseek to the individual llseek
|
||||
implementations. If your fs is not using generic_file_llseek, you
|
||||
|
@ -505,9 +503,6 @@ in sys_read() and friends.
|
|||
the lease within the individual filesystem to record the result of the
|
||||
operation
|
||||
|
||||
->poll_mask can be called with or without the waitqueue lock for the waitqueue
|
||||
returned from ->get_poll_head.
|
||||
|
||||
--------------------------- dquot_operations -------------------------------
|
||||
prototypes:
|
||||
int (*write_dquot) (struct dquot *);
|
||||
|
|
|
@ -857,8 +857,6 @@ struct file_operations {
|
|||
ssize_t (*write_iter) (struct kiocb *, struct iov_iter *);
|
||||
int (*iterate) (struct file *, struct dir_context *);
|
||||
__poll_t (*poll) (struct file *, struct poll_table_struct *);
|
||||
struct wait_queue_head * (*get_poll_head)(struct file *, __poll_t);
|
||||
__poll_t (*poll_mask) (struct file *, __poll_t);
|
||||
long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
|
||||
long (*compat_ioctl) (struct file *, unsigned int, unsigned long);
|
||||
int (*mmap) (struct file *, struct vm_area_struct *);
|
||||
|
@ -903,17 +901,6 @@ otherwise noted.
|
|||
activity on this file and (optionally) go to sleep until there
|
||||
is activity. Called by the select(2) and poll(2) system calls
|
||||
|
||||
get_poll_head: Returns the struct wait_queue_head that callers can
|
||||
wait on. Callers need to check the returned events using ->poll_mask
|
||||
once woken. Can return NULL to indicate polling is not supported,
|
||||
or any error code using the ERR_PTR convention to indicate that a
|
||||
grave error occured and ->poll_mask shall not be called.
|
||||
|
||||
poll_mask: return the mask of EPOLL* values describing the file descriptor
|
||||
state. Called either before going to sleep on the waitqueue returned by
|
||||
get_poll_head, or after it has been woken. If ->get_poll_head and
|
||||
->poll_mask are implemented ->poll does not need to be implement.
|
||||
|
||||
unlocked_ioctl: called by the ioctl(2) system call.
|
||||
|
||||
compat_ioctl: called by the ioctl(2) system call when 32 bit system calls
|
||||
|
|
|
@ -50,6 +50,11 @@ LDFLAGS_MODULE
|
|||
--------------------------------------------------
|
||||
Additional options used for $(LD) when linking modules.
|
||||
|
||||
KBUILD_KCONFIG
|
||||
--------------------------------------------------
|
||||
Set the top-level Kconfig file to the value of this environment
|
||||
variable. The default name is "Kconfig".
|
||||
|
||||
KBUILD_VERBOSE
|
||||
--------------------------------------------------
|
||||
Set the kbuild verbosity. Can be assigned same values as "V=...".
|
||||
|
@ -88,7 +93,8 @@ In most cases the name of the architecture is the same as the
|
|||
directory name found in the arch/ directory.
|
||||
But some architectures such as x86 and sparc have aliases.
|
||||
x86: i386 for 32 bit, x86_64 for 64 bit
|
||||
sparc: sparc for 32 bit, sparc64 for 64 bit
|
||||
sh: sh for 32 bit, sh64 for 64 bit
|
||||
sparc: sparc32 for 32 bit, sparc64 for 64 bit
|
||||
|
||||
CROSS_COMPILE
|
||||
--------------------------------------------------
|
||||
|
@ -148,15 +154,6 @@ stripped after they are installed. If INSTALL_MOD_STRIP is '1', then
|
|||
the default option --strip-debug will be used. Otherwise,
|
||||
INSTALL_MOD_STRIP value will be used as the options to the strip command.
|
||||
|
||||
INSTALL_FW_PATH
|
||||
--------------------------------------------------
|
||||
INSTALL_FW_PATH specifies where to install the firmware blobs.
|
||||
The default value is:
|
||||
|
||||
$(INSTALL_MOD_PATH)/lib/firmware
|
||||
|
||||
The value can be overridden in which case the default value is ignored.
|
||||
|
||||
INSTALL_HDR_PATH
|
||||
--------------------------------------------------
|
||||
INSTALL_HDR_PATH specifies where to install user space headers when
|
||||
|
|
|
@ -430,6 +430,12 @@ This sets the config program's title bar if the config program chooses
|
|||
to use it. It should be placed at the top of the configuration, before any
|
||||
other statement.
|
||||
|
||||
'#' Kconfig source file comment:
|
||||
|
||||
An unquoted '#' character anywhere in a source file line indicates
|
||||
the beginning of a source file comment. The remainder of that line
|
||||
is a comment.
|
||||
|
||||
|
||||
Kconfig hints
|
||||
-------------
|
||||
|
|
|
@ -2,9 +2,9 @@ This file contains some assistance for using "make *config".
|
|||
|
||||
Use "make help" to list all of the possible configuration targets.
|
||||
|
||||
The xconfig ('qconf') and menuconfig ('mconf') programs also
|
||||
have embedded help text. Be sure to check it for navigation,
|
||||
search, and other general help text.
|
||||
The xconfig ('qconf'), menuconfig ('mconf'), and nconfig ('nconf')
|
||||
programs also have embedded help text. Be sure to check that for
|
||||
navigation, search, and other general help text.
|
||||
|
||||
======================================================================
|
||||
General
|
||||
|
@ -17,13 +17,16 @@ this happens, using a previously working .config file and running
|
|||
for you, so you may find that you need to see what NEW kernel
|
||||
symbols have been introduced.
|
||||
|
||||
To see a list of new config symbols when using "make oldconfig", use
|
||||
To see a list of new config symbols, use
|
||||
|
||||
cp user/some/old.config .config
|
||||
make listnewconfig
|
||||
|
||||
and the config program will list any new symbols, one per line.
|
||||
|
||||
Alternatively, you can use the brute force method:
|
||||
|
||||
make oldconfig
|
||||
scripts/diffconfig .config.old .config | less
|
||||
|
||||
______________________________________________________________________
|
||||
|
@ -160,7 +163,7 @@ Searching in menuconfig:
|
|||
This lists all config symbols that contain "hotplug",
|
||||
e.g., HOTPLUG_CPU, MEMORY_HOTPLUG.
|
||||
|
||||
For search help, enter / followed TAB-TAB-TAB (to highlight
|
||||
For search help, enter / followed by TAB-TAB (to highlight
|
||||
<Help>) and Enter. This will tell you that you can also use
|
||||
regular expressions (regexes) in the search string, so if you
|
||||
are not interested in MEMORY_HOTPLUG, you could try
|
||||
|
@ -202,6 +205,39 @@ Example:
|
|||
make MENUCONFIG_MODE=single_menu menuconfig
|
||||
|
||||
|
||||
======================================================================
|
||||
nconfig
|
||||
--------------------------------------------------
|
||||
|
||||
nconfig is an alternate text-based configurator. It lists function
|
||||
keys across the bottom of the terminal (window) that execute commands.
|
||||
You can also just use the corresponding numeric key to execute the
|
||||
commands unless you are in a data entry window. E.g., instead of F6
|
||||
for Save, you can just press 6.
|
||||
|
||||
Use F1 for Global help or F3 for the Short help menu.
|
||||
|
||||
Searching in nconfig:
|
||||
|
||||
You can search either in the menu entry "prompt" strings
|
||||
or in the configuration symbols.
|
||||
|
||||
Use / to begin a search through the menu entries. This does
|
||||
not support regular expressions. Use <Down> or <Up> for
|
||||
Next hit and Previous hit, respectively. Use <Esc> to
|
||||
terminate the search mode.
|
||||
|
||||
F8 (SymSearch) searches the configuration symbols for the
|
||||
given string or regular expression (regex).
|
||||
|
||||
NCONFIG_MODE
|
||||
--------------------------------------------------
|
||||
This mode shows all sub-menus in one large tree.
|
||||
|
||||
Example:
|
||||
make NCONFIG_MODE=single_menu nconfig
|
||||
|
||||
|
||||
======================================================================
|
||||
xconfig
|
||||
--------------------------------------------------
|
||||
|
@ -230,8 +266,7 @@ gconfig
|
|||
|
||||
Searching in gconfig:
|
||||
|
||||
None (gconfig isn't maintained as well as xconfig or menuconfig);
|
||||
however, gconfig does have a few more viewing choices than
|
||||
xconfig does.
|
||||
There is no search command in gconfig. However, gconfig does
|
||||
have several different viewing choices, modes, and options.
|
||||
|
||||
###
|
||||
|
|
|
@ -1,3 +1,4 @@
|
|||
==============================================================
|
||||
Linux* Base Driver for the Intel(R) PRO/100 Family of Adapters
|
||||
==============================================================
|
||||
|
||||
|
@ -86,83 +87,84 @@ Event Log Message Level: The driver uses the message level flag to log events
|
|||
Additional Configurations
|
||||
=========================
|
||||
|
||||
Configuring the Driver on Different Distributions
|
||||
-------------------------------------------------
|
||||
Configuring the Driver on Different Distributions
|
||||
-------------------------------------------------
|
||||
|
||||
Configuring a network driver to load properly when the system is started is
|
||||
distribution dependent. Typically, the configuration process involves adding
|
||||
an alias line to /etc/modprobe.d/*.conf as well as editing other system
|
||||
startup scripts and/or configuration files. Many popular Linux
|
||||
distributions ship with tools to make these changes for you. To learn the
|
||||
proper way to configure a network device for your system, refer to your
|
||||
distribution documentation. If during this process you are asked for the
|
||||
driver or module name, the name for the Linux Base Driver for the Intel
|
||||
PRO/100 Family of Adapters is e100.
|
||||
Configuring a network driver to load properly when the system is started
|
||||
is distribution dependent. Typically, the configuration process involves
|
||||
adding an alias line to /etc/modprobe.d/*.conf as well as editing other
|
||||
system startup scripts and/or configuration files. Many popular Linux
|
||||
distributions ship with tools to make these changes for you. To learn
|
||||
the proper way to configure a network device for your system, refer to
|
||||
your distribution documentation. If during this process you are asked
|
||||
for the driver or module name, the name for the Linux Base Driver for
|
||||
the Intel PRO/100 Family of Adapters is e100.
|
||||
|
||||
As an example, if you install the e100 driver for two PRO/100 adapters
|
||||
(eth0 and eth1), add the following to a configuration file in /etc/modprobe.d/
|
||||
As an example, if you install the e100 driver for two PRO/100 adapters
|
||||
(eth0 and eth1), add the following to a configuration file in
|
||||
/etc/modprobe.d/::
|
||||
|
||||
alias eth0 e100
|
||||
alias eth1 e100
|
||||
|
||||
Viewing Link Messages
|
||||
---------------------
|
||||
In order to see link messages and other Intel driver information on your
|
||||
console, you must set the dmesg level up to six. This can be done by
|
||||
entering the following on the command line before loading the e100 driver::
|
||||
Viewing Link Messages
|
||||
---------------------
|
||||
|
||||
In order to see link messages and other Intel driver information on your
|
||||
console, you must set the dmesg level up to six. This can be done by
|
||||
entering the following on the command line before loading the e100
|
||||
driver::
|
||||
|
||||
dmesg -n 6
|
||||
|
||||
If you wish to see all messages issued by the driver, including debug
|
||||
messages, set the dmesg level to eight.
|
||||
If you wish to see all messages issued by the driver, including debug
|
||||
messages, set the dmesg level to eight.
|
||||
|
||||
NOTE: This setting is not saved across reboots.
|
||||
NOTE: This setting is not saved across reboots.
|
||||
|
||||
ethtool
|
||||
-------
|
||||
|
||||
ethtool
|
||||
-------
|
||||
The driver utilizes the ethtool interface for driver configuration and
|
||||
diagnostics, as well as displaying statistical information. The ethtool
|
||||
version 1.6 or later is required for this functionality.
|
||||
|
||||
The driver utilizes the ethtool interface for driver configuration and
|
||||
diagnostics, as well as displaying statistical information. The ethtool
|
||||
version 1.6 or later is required for this functionality.
|
||||
The latest release of ethtool can be found from
|
||||
https://www.kernel.org/pub/software/network/ethtool/
|
||||
|
||||
The latest release of ethtool can be found from
|
||||
https://www.kernel.org/pub/software/network/ethtool/
|
||||
Enabling Wake on LAN* (WoL)
|
||||
---------------------------
|
||||
WoL is provided through the ethtool* utility. For instructions on
|
||||
enabling WoL with ethtool, refer to the ethtool man page. WoL will be
|
||||
enabled on the system during the next shut down or reboot. For this
|
||||
driver version, in order to enable WoL, the e100 driver must be loaded
|
||||
when shutting down or rebooting the system.
|
||||
|
||||
Enabling Wake on LAN* (WoL)
|
||||
---------------------------
|
||||
WoL is provided through the ethtool* utility. For instructions on enabling
|
||||
WoL with ethtool, refer to the ethtool man page.
|
||||
NAPI
|
||||
----
|
||||
|
||||
WoL will be enabled on the system during the next shut down or reboot. For
|
||||
this driver version, in order to enable WoL, the e100 driver must be
|
||||
loaded when shutting down or rebooting the system.
|
||||
NAPI (Rx polling mode) is supported in the e100 driver.
|
||||
|
||||
NAPI
|
||||
----
|
||||
See https://wiki.linuxfoundation.org/networking/napi for more
|
||||
information on NAPI.
|
||||
|
||||
NAPI (Rx polling mode) is supported in the e100 driver.
|
||||
Multiple Interfaces on Same Ethernet Broadcast Network
|
||||
------------------------------------------------------
|
||||
|
||||
See https://wiki.linuxfoundation.org/networking/napi for more information
|
||||
on NAPI.
|
||||
Due to the default ARP behavior on Linux, it is not possible to have one
|
||||
system on two IP networks in the same Ethernet broadcast domain
|
||||
(non-partitioned switch) behave as expected. All Ethernet interfaces
|
||||
will respond to IP traffic for any IP address assigned to the system.
|
||||
This results in unbalanced receive traffic.
|
||||
|
||||
Multiple Interfaces on Same Ethernet Broadcast Network
|
||||
------------------------------------------------------
|
||||
If you have multiple interfaces in a server, either turn on ARP
|
||||
filtering by
|
||||
|
||||
Due to the default ARP behavior on Linux, it is not possible to have
|
||||
one system on two IP networks in the same Ethernet broadcast domain
|
||||
(non-partitioned switch) behave as expected. All Ethernet interfaces
|
||||
will respond to IP traffic for any IP address assigned to the system.
|
||||
This results in unbalanced receive traffic.
|
||||
(1) entering:: echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
|
||||
(this only works if your kernel's version is higher than 2.4.5), or
|
||||
|
||||
If you have multiple interfaces in a server, either turn on ARP
|
||||
filtering by
|
||||
|
||||
(1) entering:: echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
|
||||
(this only works if your kernel's version is higher than 2.4.5), or
|
||||
|
||||
(2) installing the interfaces in separate broadcast domains (either
|
||||
in different switches or in a switch partitioned to VLANs).
|
||||
(2) installing the interfaces in separate broadcast domains (either
|
||||
in different switches or in a switch partitioned to VLANs).
|
||||
|
||||
|
||||
Support
|
||||
|
|
|
@ -1,3 +1,4 @@
|
|||
===========================================================
|
||||
Linux* Base Driver for Intel(R) Ethernet Network Connection
|
||||
===========================================================
|
||||
|
||||
|
@ -354,57 +355,58 @@ previously mentioned to force the adapter to the same speed and duplex.
|
|||
Additional Configurations
|
||||
=========================
|
||||
|
||||
Jumbo Frames
|
||||
------------
|
||||
Jumbo Frames support is enabled by changing the MTU to a value larger than
|
||||
the default of 1500. Use the ifconfig command to increase the MTU size.
|
||||
For example::
|
||||
Jumbo Frames
|
||||
------------
|
||||
Jumbo Frames support is enabled by changing the MTU to a value larger
|
||||
than the default of 1500. Use the ifconfig command to increase the MTU
|
||||
size. For example::
|
||||
|
||||
ifconfig eth<x> mtu 9000 up
|
||||
|
||||
This setting is not saved across reboots. It can be made permanent if
|
||||
you add::
|
||||
This setting is not saved across reboots. It can be made permanent if
|
||||
you add::
|
||||
|
||||
MTU=9000
|
||||
|
||||
to the file /etc/sysconfig/network-scripts/ifcfg-eth<x>. This example
|
||||
applies to the Red Hat distributions; other distributions may store this
|
||||
setting in a different location.
|
||||
to the file /etc/sysconfig/network-scripts/ifcfg-eth<x>. This example
|
||||
applies to the Red Hat distributions; other distributions may store this
|
||||
setting in a different location.
|
||||
|
||||
Notes:
|
||||
Degradation in throughput performance may be observed in some Jumbo frames
|
||||
environments. If this is observed, increasing the application's socket buffer
|
||||
size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values may help.
|
||||
See the specific application manual and /usr/src/linux*/Documentation/
|
||||
networking/ip-sysctl.txt for more details.
|
||||
Notes: Degradation in throughput performance may be observed in some
|
||||
Jumbo frames environments. If this is observed, increasing the
|
||||
application's socket buffer size and/or increasing the
|
||||
/proc/sys/net/ipv4/tcp_*mem entry values may help. See the specific
|
||||
application manual and /usr/src/linux*/Documentation/
|
||||
networking/ip-sysctl.txt for more details.
|
||||
|
||||
- The maximum MTU setting for Jumbo Frames is 16110. This value coincides
|
||||
with the maximum Jumbo Frames size of 16128.
|
||||
- The maximum MTU setting for Jumbo Frames is 16110. This value
|
||||
coincides with the maximum Jumbo Frames size of 16128.
|
||||
|
||||
- Using Jumbo frames at 10 or 100 Mbps is not supported and may result in
|
||||
poor performance or loss of link.
|
||||
- Using Jumbo frames at 10 or 100 Mbps is not supported and may result
|
||||
in poor performance or loss of link.
|
||||
|
||||
- Adapters based on the Intel(R) 82542 and 82573V/E controller do not
|
||||
support Jumbo Frames. These correspond to the following product names:
|
||||
Intel(R) PRO/1000 Gigabit Server Adapter
|
||||
Intel(R) PRO/1000 PM Network Connection
|
||||
- Adapters based on the Intel(R) 82542 and 82573V/E controller do not
|
||||
support Jumbo Frames. These correspond to the following product names:
|
||||
Intel(R) PRO/1000 Gigabit Server Adapter Intel(R) PRO/1000 PM Network
|
||||
Connection
|
||||
|
||||
ethtool
|
||||
-------
|
||||
The driver utilizes the ethtool interface for driver configuration and
|
||||
diagnostics, as well as displaying statistical information. The ethtool
|
||||
version 1.6 or later is required for this functionality.
|
||||
ethtool
|
||||
-------
|
||||
The driver utilizes the ethtool interface for driver configuration and
|
||||
diagnostics, as well as displaying statistical information. The ethtool
|
||||
version 1.6 or later is required for this functionality.
|
||||
|
||||
The latest release of ethtool can be found from
|
||||
https://www.kernel.org/pub/software/network/ethtool/
|
||||
The latest release of ethtool can be found from
|
||||
https://www.kernel.org/pub/software/network/ethtool/
|
||||
|
||||
Enabling Wake on LAN* (WoL)
|
||||
---------------------------
|
||||
WoL is configured through the ethtool* utility.
|
||||
Enabling Wake on LAN* (WoL)
|
||||
---------------------------
|
||||
WoL is configured through the ethtool* utility.
|
||||
|
||||
WoL will be enabled on the system during the next shut down or reboot.
|
||||
For this driver version, in order to enable WoL, the e1000 driver must be
|
||||
loaded when shutting down or rebooting the system.
|
||||
|
||||
WoL will be enabled on the system during the next shut down or reboot.
|
||||
For this driver version, in order to enable WoL, the e1000 driver must be
|
||||
loaded when shutting down or rebooting the system.
|
||||
|
||||
Support
|
||||
=======
|
||||
|
|
|
@ -48,7 +48,7 @@ void strp_pause(struct strparser *strp)
|
|||
Temporarily pause a stream parser. Message parsing is suspended
|
||||
and no new messages are delivered to the upper layer.
|
||||
|
||||
void strp_pause(struct strparser *strp)
|
||||
void strp_unpause(struct strparser *strp)
|
||||
|
||||
Unpause a paused stream parser.
|
||||
|
||||
|
|
|
@ -226,7 +226,7 @@ $ rm configs/<config name>.<number>/<function>
|
|||
where <config name>.<number> specify the configuration and <function> is
|
||||
a symlink to a function being removed from the configuration, e.g.:
|
||||
|
||||
$ rm configfs/c.1/ncm.usb0
|
||||
$ rm configs/c.1/ncm.usb0
|
||||
|
||||
...
|
||||
...
|
||||
|
|
37
MAINTAINERS
37
MAINTAINERS
|
@ -581,7 +581,7 @@ W: https://www.infradead.org/~dhowells/kafs/
|
|||
|
||||
AGPGART DRIVER
|
||||
M: David Airlie <airlied@linux.ie>
|
||||
T: git git://people.freedesktop.org/~airlied/linux (part of drm maint)
|
||||
T: git git://anongit.freedesktop.org/drm/drm
|
||||
S: Maintained
|
||||
F: drivers/char/agp/
|
||||
F: include/linux/agp*
|
||||
|
@ -2971,9 +2971,13 @@ N: bcm585*
|
|||
N: bcm586*
|
||||
N: bcm88312
|
||||
N: hr2
|
||||
F: arch/arm64/boot/dts/broadcom/ns2*
|
||||
N: stingray
|
||||
F: arch/arm64/boot/dts/broadcom/northstar2/*
|
||||
F: arch/arm64/boot/dts/broadcom/stingray/*
|
||||
F: drivers/clk/bcm/clk-ns*
|
||||
F: drivers/clk/bcm/clk-sr*
|
||||
F: drivers/pinctrl/bcm/pinctrl-ns*
|
||||
F: include/dt-bindings/clock/bcm-sr*
|
||||
|
||||
BROADCOM KONA GPIO DRIVER
|
||||
M: Ray Jui <rjui@broadcom.com>
|
||||
|
@ -4456,6 +4460,7 @@ F: Documentation/blockdev/drbd/
|
|||
|
||||
DRIVER CORE, KOBJECTS, DEBUGFS AND SYSFS
|
||||
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||||
R: "Rafael J. Wysocki" <rafael@kernel.org>
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core.git
|
||||
S: Supported
|
||||
F: Documentation/kobject.txt
|
||||
|
@ -4626,7 +4631,7 @@ F: include/uapi/drm/vmwgfx_drm.h
|
|||
DRM DRIVERS
|
||||
M: David Airlie <airlied@linux.ie>
|
||||
L: dri-devel@lists.freedesktop.org
|
||||
T: git git://people.freedesktop.org/~airlied/linux
|
||||
T: git git://anongit.freedesktop.org/drm/drm
|
||||
B: https://bugs.freedesktop.org/
|
||||
C: irc://chat.freenode.net/dri-devel
|
||||
S: Maintained
|
||||
|
@ -5677,7 +5682,7 @@ F: drivers/crypto/caam/
|
|||
F: Documentation/devicetree/bindings/crypto/fsl-sec4.txt
|
||||
|
||||
FREESCALE DIU FRAMEBUFFER DRIVER
|
||||
M: Timur Tabi <timur@tabi.org>
|
||||
M: Timur Tabi <timur@kernel.org>
|
||||
L: linux-fbdev@vger.kernel.org
|
||||
S: Maintained
|
||||
F: drivers/video/fbdev/fsl-diu-fb.*
|
||||
|
@ -5777,7 +5782,7 @@ S: Maintained
|
|||
F: drivers/net/wan/fsl_ucc_hdlc*
|
||||
|
||||
FREESCALE QUICC ENGINE UCC UART DRIVER
|
||||
M: Timur Tabi <timur@tabi.org>
|
||||
M: Timur Tabi <timur@kernel.org>
|
||||
L: linuxppc-dev@lists.ozlabs.org
|
||||
S: Maintained
|
||||
F: drivers/tty/serial/ucc_uart.c
|
||||
|
@ -5801,7 +5806,7 @@ F: drivers/net/ethernet/freescale/fs_enet/
|
|||
F: include/linux/fs_enet_pd.h
|
||||
|
||||
FREESCALE SOC SOUND DRIVERS
|
||||
M: Timur Tabi <timur@tabi.org>
|
||||
M: Timur Tabi <timur@kernel.org>
|
||||
M: Nicolin Chen <nicoleotsuka@gmail.com>
|
||||
M: Xiubo Li <Xiubo.Lee@gmail.com>
|
||||
R: Fabio Estevam <fabio.estevam@nxp.com>
|
||||
|
@ -9898,6 +9903,7 @@ M: Andrew Lunn <andrew@lunn.ch>
|
|||
M: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
|
||||
M: Florian Fainelli <f.fainelli@gmail.com>
|
||||
S: Maintained
|
||||
F: Documentation/devicetree/bindings/net/dsa/
|
||||
F: net/dsa/
|
||||
F: include/net/dsa.h
|
||||
F: include/linux/dsa/
|
||||
|
@ -10224,11 +10230,13 @@ F: sound/soc/codecs/sgtl5000*
|
|||
|
||||
NXP TDA998X DRM DRIVER
|
||||
M: Russell King <linux@armlinux.org.uk>
|
||||
S: Supported
|
||||
S: Maintained
|
||||
T: git git://git.armlinux.org.uk/~rmk/linux-arm.git drm-tda998x-devel
|
||||
T: git git://git.armlinux.org.uk/~rmk/linux-arm.git drm-tda998x-fixes
|
||||
F: drivers/gpu/drm/i2c/tda998x_drv.c
|
||||
F: include/drm/i2c/tda998x.h
|
||||
F: include/dt-bindings/display/tda998x.h
|
||||
K: "nxp,tda998x"
|
||||
|
||||
NXP TFA9879 DRIVER
|
||||
M: Peter Rosin <peda@axentia.se>
|
||||
|
@ -11492,6 +11500,15 @@ W: http://wireless.kernel.org/en/users/Drivers/p54
|
|||
S: Obsolete
|
||||
F: drivers/net/wireless/intersil/prism54/
|
||||
|
||||
PROC FILESYSTEM
|
||||
R: Alexey Dobriyan <adobriyan@gmail.com>
|
||||
L: linux-kernel@vger.kernel.org
|
||||
L: linux-fsdevel@vger.kernel.org
|
||||
S: Maintained
|
||||
F: fs/proc/
|
||||
F: include/linux/proc_fs.h
|
||||
F: tools/testing/selftests/proc/
|
||||
|
||||
PROC SYSCTL
|
||||
M: "Luis R. Rodriguez" <mcgrof@kernel.org>
|
||||
M: Kees Cook <keescook@chromium.org>
|
||||
|
@ -11824,9 +11841,9 @@ F: Documentation/devicetree/bindings/opp/kryo-cpufreq.txt
|
|||
F: drivers/cpufreq/qcom-cpufreq-kryo.c
|
||||
|
||||
QUALCOMM EMAC GIGABIT ETHERNET DRIVER
|
||||
M: Timur Tabi <timur@codeaurora.org>
|
||||
M: Timur Tabi <timur@kernel.org>
|
||||
L: netdev@vger.kernel.org
|
||||
S: Supported
|
||||
S: Maintained
|
||||
F: drivers/net/ethernet/qualcomm/emac/
|
||||
|
||||
QUALCOMM HEXAGON ARCHITECTURE
|
||||
|
@ -11837,7 +11854,7 @@ S: Supported
|
|||
F: arch/hexagon/
|
||||
|
||||
QUALCOMM HIDMA DRIVER
|
||||
M: Sinan Kaya <okaya@codeaurora.org>
|
||||
M: Sinan Kaya <okaya@kernel.org>
|
||||
L: linux-arm-kernel@lists.infradead.org
|
||||
L: linux-arm-msm@vger.kernel.org
|
||||
L: dmaengine@vger.kernel.org
|
||||
|
|
15
Makefile
15
Makefile
|
@ -2,7 +2,7 @@
|
|||
VERSION = 4
|
||||
PATCHLEVEL = 18
|
||||
SUBLEVEL = 0
|
||||
EXTRAVERSION = -rc2
|
||||
EXTRAVERSION = -rc5
|
||||
NAME = Merciless Moray
|
||||
|
||||
# *DOCUMENTATION*
|
||||
|
@ -353,9 +353,9 @@ CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
|
|||
else if [ -x /bin/bash ]; then echo /bin/bash; \
|
||||
else echo sh; fi ; fi)
|
||||
|
||||
HOST_LFS_CFLAGS := $(shell getconf LFS_CFLAGS)
|
||||
HOST_LFS_LDFLAGS := $(shell getconf LFS_LDFLAGS)
|
||||
HOST_LFS_LIBS := $(shell getconf LFS_LIBS)
|
||||
HOST_LFS_CFLAGS := $(shell getconf LFS_CFLAGS 2>/dev/null)
|
||||
HOST_LFS_LDFLAGS := $(shell getconf LFS_LDFLAGS 2>/dev/null)
|
||||
HOST_LFS_LIBS := $(shell getconf LFS_LIBS 2>/dev/null)
|
||||
|
||||
HOSTCC = gcc
|
||||
HOSTCXX = g++
|
||||
|
@ -507,11 +507,6 @@ ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC) $(KBUILD_CFLA
|
|||
KBUILD_AFLAGS += -DCC_HAVE_ASM_GOTO
|
||||
endif
|
||||
|
||||
ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/cc-can-link.sh $(CC)), y)
|
||||
CC_CAN_LINK := y
|
||||
export CC_CAN_LINK
|
||||
endif
|
||||
|
||||
# The expansion should be delayed until arch/$(SRCARCH)/Makefile is included.
|
||||
# Some architectures define CROSS_COMPILE in arch/$(SRCARCH)/Makefile.
|
||||
# CC_VERSION_TEXT is referenced from Kconfig (so it needs export),
|
||||
|
@ -1717,6 +1712,6 @@ endif # skip-makefile
|
|||
PHONY += FORCE
|
||||
FORCE:
|
||||
|
||||
# Declare the contents of the .PHONY variable as phony. We keep that
|
||||
# Declare the contents of the PHONY variable as phony. We keep that
|
||||
# information in a variable so we can use it in if_changed and friends.
|
||||
.PHONY: $(PHONY)
|
||||
|
|
|
@ -1245,8 +1245,14 @@ config PCI
|
|||
VESA. If you have PCI, say Y, otherwise N.
|
||||
|
||||
config PCI_DOMAINS
|
||||
bool
|
||||
bool "Support for multiple PCI domains"
|
||||
depends on PCI
|
||||
help
|
||||
Enable PCI domains kernel management. Say Y if your machine
|
||||
has a PCI bus hierarchy that requires more than one PCI
|
||||
domain (aka segment) to be correctly managed. Say N otherwise.
|
||||
|
||||
If you don't know what to do here, say N.
|
||||
|
||||
config PCI_DOMAINS_GENERIC
|
||||
def_bool PCI_DOMAINS
|
||||
|
|
|
@ -168,7 +168,6 @@
|
|||
AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
|
||||
AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
|
||||
AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
|
||||
AM33XX_IOPAD(0x9a0, PIN_INPUT | MUX_MODE4) /* mcasp0_aclkr.mmc0_sdwp */
|
||||
>;
|
||||
};
|
||||
|
||||
|
|
|
@ -39,6 +39,8 @@
|
|||
ti,davinci-ctrl-ram-size = <0x2000>;
|
||||
ti,davinci-rmii-en = /bits/ 8 <1>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
clocks = <&emac_ick>;
|
||||
clock-names = "ick";
|
||||
};
|
||||
|
||||
davinci_mdio: ethernet@5c030000 {
|
||||
|
@ -49,6 +51,8 @@
|
|||
bus_freq = <1000000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&emac_fck>;
|
||||
clock-names = "fck";
|
||||
};
|
||||
|
||||
uart4: serial@4809e000 {
|
||||
|
@ -87,6 +91,11 @@
|
|||
};
|
||||
};
|
||||
|
||||
/* Table Table 5-79 of the TRM shows 480ab000 is reserved */
|
||||
&usb_otg_hs {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&iva {
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
@ -610,6 +610,8 @@
|
|||
|
||||
touchscreen-size-x = <480>;
|
||||
touchscreen-size-y = <272>;
|
||||
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
tlv320aic3106: tlv320aic3106@1b {
|
||||
|
|
|
@ -139,7 +139,7 @@
|
|||
3700 5
|
||||
3900 6
|
||||
4000 7>;
|
||||
cooling-cells = <2>;
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
|
|
|
@ -547,7 +547,7 @@
|
|||
|
||||
thermal: thermal@e8078 {
|
||||
compatible = "marvell,armada380-thermal";
|
||||
reg = <0xe4078 0x4>, <0xe4074 0x4>;
|
||||
reg = <0xe4078 0x4>, <0xe4070 0x8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
|
|
@ -216,7 +216,7 @@
|
|||
reg = <0x18008000 0x100>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <100000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
@ -245,7 +245,7 @@
|
|||
reg = <0x1800b000 0x100>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <100000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
@ -256,7 +256,7 @@
|
|||
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
linux,pci-domain = <0>;
|
||||
|
||||
|
@ -278,10 +278,10 @@
|
|||
compatible = "brcm,iproc-msi";
|
||||
msi-controller;
|
||||
interrupt-parent = <&gic>;
|
||||
interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 97 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 98 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 99 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
|
@ -291,7 +291,7 @@
|
|||
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
linux,pci-domain = <1>;
|
||||
|
||||
|
@ -313,10 +313,10 @@
|
|||
compatible = "brcm,iproc-msi";
|
||||
msi-controller;
|
||||
interrupt-parent = <&gic>;
|
||||
interrupts = <GIC_SPI 102 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 103 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 104 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 105 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
@ -264,7 +264,7 @@
|
|||
reg = <0x38000 0x50>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 95 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <100000>;
|
||||
};
|
||||
|
||||
|
@ -279,7 +279,7 @@
|
|||
reg = <0x3b000 0x50>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <100000>;
|
||||
};
|
||||
};
|
||||
|
@ -300,7 +300,7 @@
|
|||
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 186 IRQ_TYPE_NONE>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
linux,pci-domain = <0>;
|
||||
|
||||
|
@ -322,10 +322,10 @@
|
|||
compatible = "brcm,iproc-msi";
|
||||
msi-controller;
|
||||
interrupt-parent = <&gic>;
|
||||
interrupts = <GIC_SPI 182 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 183 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 184 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 185 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
|
||||
brcm,pcie-msi-inten;
|
||||
};
|
||||
};
|
||||
|
@ -336,7 +336,7 @@
|
|||
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 192 IRQ_TYPE_NONE>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
linux,pci-domain = <1>;
|
||||
|
||||
|
@ -358,10 +358,10 @@
|
|||
compatible = "brcm,iproc-msi";
|
||||
msi-controller;
|
||||
interrupt-parent = <&gic>;
|
||||
interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 189 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 190 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 191 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
|
||||
brcm,pcie-msi-inten;
|
||||
};
|
||||
};
|
||||
|
|
|
@ -391,7 +391,7 @@
|
|||
reg = <0x38000 0x50>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <100000>;
|
||||
dma-coherent;
|
||||
status = "disabled";
|
||||
|
@ -496,7 +496,7 @@
|
|||
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_NONE>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
linux,pci-domain = <0>;
|
||||
|
||||
|
@ -519,10 +519,10 @@
|
|||
compatible = "brcm,iproc-msi";
|
||||
msi-controller;
|
||||
interrupt-parent = <&gic>;
|
||||
interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 128 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 129 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 130 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
|
||||
brcm,pcie-msi-inten;
|
||||
};
|
||||
};
|
||||
|
@ -533,7 +533,7 @@
|
|||
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_NONE>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
linux,pci-domain = <1>;
|
||||
|
||||
|
@ -556,10 +556,10 @@
|
|||
compatible = "brcm,iproc-msi";
|
||||
msi-controller;
|
||||
interrupt-parent = <&gic>;
|
||||
interrupts = <GIC_SPI 133 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 134 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 135 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 136 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
|
||||
brcm,pcie-msi-inten;
|
||||
};
|
||||
};
|
||||
|
@ -570,7 +570,7 @@
|
|||
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_NONE>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
linux,pci-domain = <2>;
|
||||
|
||||
|
@ -593,10 +593,10 @@
|
|||
compatible = "brcm,iproc-msi";
|
||||
msi-controller;
|
||||
interrupt-parent = <&gic>;
|
||||
interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 140 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 141 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 142 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
|
||||
brcm,pcie-msi-inten;
|
||||
};
|
||||
};
|
||||
|
|
|
@ -365,7 +365,7 @@
|
|||
i2c0: i2c@18009000 {
|
||||
compatible = "brcm,iproc-i2c";
|
||||
reg = <0x18009000 0x50>;
|
||||
interrupts = <GIC_SPI 121 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clock-frequency = <100000>;
|
||||
|
|
|
@ -549,11 +549,7 @@
|
|||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
reg = <0x226000 0x1000>;
|
||||
interrupts = <42 IRQ_TYPE_EDGE_BOTH
|
||||
43 IRQ_TYPE_EDGE_BOTH 44 IRQ_TYPE_EDGE_BOTH
|
||||
45 IRQ_TYPE_EDGE_BOTH 46 IRQ_TYPE_EDGE_BOTH
|
||||
47 IRQ_TYPE_EDGE_BOTH 48 IRQ_TYPE_EDGE_BOTH
|
||||
49 IRQ_TYPE_EDGE_BOTH 50 IRQ_TYPE_EDGE_BOTH>;
|
||||
interrupts = <42 43 44 45 46 47 48 49 50>;
|
||||
ti,ngpio = <144>;
|
||||
ti,davinci-gpio-unbanked = <0>;
|
||||
status = "disabled";
|
||||
|
|
|
@ -1580,7 +1580,6 @@
|
|||
dr_mode = "otg";
|
||||
snps,dis_u3_susphy_quirk;
|
||||
snps,dis_u2_susphy_quirk;
|
||||
snps,dis_metastability_quirk;
|
||||
};
|
||||
};
|
||||
|
||||
|
@ -1608,6 +1607,7 @@
|
|||
dr_mode = "otg";
|
||||
snps,dis_u3_susphy_quirk;
|
||||
snps,dis_u2_susphy_quirk;
|
||||
snps,dis_metastability_quirk;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
@ -770,7 +770,7 @@
|
|||
|
||||
pinctrl_ts: tsgrp {
|
||||
fsl,pins = <
|
||||
MX51_PAD_CSI1_D8__GPIO3_12 0x85
|
||||
MX51_PAD_CSI1_D8__GPIO3_12 0x04
|
||||
MX51_PAD_CSI1_D9__GPIO3_13 0x85
|
||||
>;
|
||||
};
|
||||
|
|
|
@ -90,7 +90,7 @@
|
|||
clocks = <&clks IMX6Q_CLK_ECSPI5>,
|
||||
<&clks IMX6Q_CLK_ECSPI5>;
|
||||
clock-names = "ipg", "per";
|
||||
dmas = <&sdma 11 7 1>, <&sdma 12 7 2>;
|
||||
dmas = <&sdma 11 8 1>, <&sdma 12 8 2>;
|
||||
dma-names = "rx", "tx";
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
@ -1344,7 +1344,7 @@
|
|||
ranges = <0x81000000 0 0 0x08f80000 0 0x00010000 /* downstream I/O */
|
||||
0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */
|
||||
num-lanes = <1>;
|
||||
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "msi";
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 0x7>;
|
||||
|
|
|
@ -748,13 +748,13 @@
|
|||
nand0: nand@ff900000 {
|
||||
#address-cells = <0x1>;
|
||||
#size-cells = <0x1>;
|
||||
compatible = "denali,denali-nand-dt";
|
||||
compatible = "altr,socfpga-denali-nand";
|
||||
reg = <0xff900000 0x100000>,
|
||||
<0xffb80000 0x10000>;
|
||||
reg-names = "nand_data", "denali_reg";
|
||||
interrupts = <0x0 0x90 0x4>;
|
||||
dma-mask = <0xffffffff>;
|
||||
clocks = <&nand_clk>;
|
||||
clocks = <&nand_x_clk>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
|
|
@ -593,8 +593,7 @@
|
|||
#size-cells = <0>;
|
||||
reg = <0xffda5000 0x100>;
|
||||
interrupts = <0 102 4>;
|
||||
num-chipselect = <4>;
|
||||
bus-num = <0>;
|
||||
num-cs = <4>;
|
||||
/*32bit_access;*/
|
||||
tx-dma-channel = <&pdma 16>;
|
||||
rx-dma-channel = <&pdma 17>;
|
||||
|
@ -633,7 +632,7 @@
|
|||
nand: nand@ffb90000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "denali,denali-nand-dt", "altr,socfpga-denali-nand";
|
||||
compatible = "altr,socfpga-denali-nand";
|
||||
reg = <0xffb90000 0x72000>,
|
||||
<0xffb80000 0x10000>;
|
||||
reg-names = "nand_data", "denali_reg";
|
||||
|
|
|
@ -10,7 +10,7 @@ obj-$(CONFIG_DMABOUNCE) += dmabounce.o
|
|||
obj-$(CONFIG_SHARP_LOCOMO) += locomo.o
|
||||
obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o
|
||||
obj-$(CONFIG_SHARP_SCOOP) += scoop.o
|
||||
obj-$(CONFIG_SMP) += secure_cntvoff.o
|
||||
obj-$(CONFIG_CPU_V7) += secure_cntvoff.o
|
||||
obj-$(CONFIG_PCI_HOST_ITE8152) += it8152.o
|
||||
obj-$(CONFIG_MCPM) += mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o
|
||||
CFLAGS_REMOVE_mcpm_entry.o = -pg
|
||||
|
|
|
@ -141,9 +141,11 @@ CONFIG_USB_STORAGE=y
|
|||
CONFIG_USB_CHIPIDEA=y
|
||||
CONFIG_USB_CHIPIDEA_UDC=y
|
||||
CONFIG_USB_CHIPIDEA_HOST=y
|
||||
CONFIG_USB_CHIPIDEA_ULPI=y
|
||||
CONFIG_NOP_USB_XCEIV=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_ETH=m
|
||||
CONFIG_USB_ULPI_BUS=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_PLTFM=y
|
||||
|
|
|
@ -302,6 +302,7 @@ CONFIG_USB_STORAGE=y
|
|||
CONFIG_USB_CHIPIDEA=y
|
||||
CONFIG_USB_CHIPIDEA_UDC=y
|
||||
CONFIG_USB_CHIPIDEA_HOST=y
|
||||
CONFIG_USB_CHIPIDEA_ULPI=y
|
||||
CONFIG_USB_SERIAL=m
|
||||
CONFIG_USB_SERIAL_GENERIC=y
|
||||
CONFIG_USB_SERIAL_FTDI_SIO=m
|
||||
|
@ -338,6 +339,7 @@ CONFIG_USB_GADGETFS=m
|
|||
CONFIG_USB_FUNCTIONFS=m
|
||||
CONFIG_USB_MASS_STORAGE=m
|
||||
CONFIG_USB_G_SERIAL=m
|
||||
CONFIG_USB_ULPI_BUS=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_PLTFM=y
|
||||
|
|
|
@ -1,5 +1,4 @@
|
|||
CONFIG_SYSVIPC=y
|
||||
CONFIG_FHANDLE=y
|
||||
CONFIG_NO_HZ=y
|
||||
CONFIG_HIGH_RES_TIMERS=y
|
||||
CONFIG_CGROUPS=y
|
||||
|
@ -10,20 +9,10 @@ CONFIG_MODULES=y
|
|||
CONFIG_MODULE_UNLOAD=y
|
||||
CONFIG_PARTITION_ADVANCED=y
|
||||
CONFIG_CMDLINE_PARTITION=y
|
||||
CONFIG_ARCH_MULTI_V7=y
|
||||
# CONFIG_ARCH_MULTI_V5 is not set
|
||||
# CONFIG_ARCH_MULTI_V4 is not set
|
||||
CONFIG_ARCH_VIRT=y
|
||||
CONFIG_ARCH_ALPINE=y
|
||||
CONFIG_ARCH_ARTPEC=y
|
||||
CONFIG_MACH_ARTPEC6=y
|
||||
CONFIG_ARCH_MVEBU=y
|
||||
CONFIG_MACH_ARMADA_370=y
|
||||
CONFIG_MACH_ARMADA_375=y
|
||||
CONFIG_MACH_ARMADA_38X=y
|
||||
CONFIG_MACH_ARMADA_39X=y
|
||||
CONFIG_MACH_ARMADA_XP=y
|
||||
CONFIG_MACH_DOVE=y
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_SOC_SAMA5D2=y
|
||||
CONFIG_SOC_SAMA5D3=y
|
||||
|
@ -32,9 +21,9 @@ CONFIG_ARCH_BCM=y
|
|||
CONFIG_ARCH_BCM_CYGNUS=y
|
||||
CONFIG_ARCH_BCM_HR2=y
|
||||
CONFIG_ARCH_BCM_NSP=y
|
||||
CONFIG_ARCH_BCM_21664=y
|
||||
CONFIG_ARCH_BCM_281XX=y
|
||||
CONFIG_ARCH_BCM_5301X=y
|
||||
CONFIG_ARCH_BCM_281XX=y
|
||||
CONFIG_ARCH_BCM_21664=y
|
||||
CONFIG_ARCH_BCM2835=y
|
||||
CONFIG_ARCH_BCM_63XX=y
|
||||
CONFIG_ARCH_BRCMSTB=y
|
||||
|
@ -43,14 +32,14 @@ CONFIG_MACH_BERLIN_BG2=y
|
|||
CONFIG_MACH_BERLIN_BG2CD=y
|
||||
CONFIG_MACH_BERLIN_BG2Q=y
|
||||
CONFIG_ARCH_DIGICOLOR=y
|
||||
CONFIG_ARCH_EXYNOS=y
|
||||
CONFIG_EXYNOS5420_MCPM=y
|
||||
CONFIG_ARCH_HIGHBANK=y
|
||||
CONFIG_ARCH_HISI=y
|
||||
CONFIG_ARCH_HI3xxx=y
|
||||
CONFIG_ARCH_HIX5HD2=y
|
||||
CONFIG_ARCH_HIP01=y
|
||||
CONFIG_ARCH_HIP04=y
|
||||
CONFIG_ARCH_KEYSTONE=y
|
||||
CONFIG_ARCH_MESON=y
|
||||
CONFIG_ARCH_HIX5HD2=y
|
||||
CONFIG_ARCH_MXC=y
|
||||
CONFIG_SOC_IMX50=y
|
||||
CONFIG_SOC_IMX51=y
|
||||
|
@ -60,29 +49,30 @@ CONFIG_SOC_IMX6SL=y
|
|||
CONFIG_SOC_IMX6SX=y
|
||||
CONFIG_SOC_IMX6UL=y
|
||||
CONFIG_SOC_IMX7D=y
|
||||
CONFIG_SOC_VF610=y
|
||||
CONFIG_SOC_LS1021A=y
|
||||
CONFIG_SOC_VF610=y
|
||||
CONFIG_ARCH_KEYSTONE=y
|
||||
CONFIG_ARCH_MEDIATEK=y
|
||||
CONFIG_ARCH_MESON=y
|
||||
CONFIG_ARCH_MVEBU=y
|
||||
CONFIG_MACH_ARMADA_370=y
|
||||
CONFIG_MACH_ARMADA_375=y
|
||||
CONFIG_MACH_ARMADA_38X=y
|
||||
CONFIG_MACH_ARMADA_39X=y
|
||||
CONFIG_MACH_ARMADA_XP=y
|
||||
CONFIG_MACH_DOVE=y
|
||||
CONFIG_ARCH_OMAP3=y
|
||||
CONFIG_ARCH_OMAP4=y
|
||||
CONFIG_SOC_OMAP5=y
|
||||
CONFIG_SOC_AM33XX=y
|
||||
CONFIG_SOC_AM43XX=y
|
||||
CONFIG_SOC_DRA7XX=y
|
||||
CONFIG_ARCH_SIRF=y
|
||||
CONFIG_ARCH_QCOM=y
|
||||
CONFIG_ARCH_MEDIATEK=y
|
||||
CONFIG_ARCH_MSM8X60=y
|
||||
CONFIG_ARCH_MSM8960=y
|
||||
CONFIG_ARCH_MSM8974=y
|
||||
CONFIG_ARCH_ROCKCHIP=y
|
||||
CONFIG_ARCH_SOCFPGA=y
|
||||
CONFIG_PLAT_SPEAR=y
|
||||
CONFIG_ARCH_SPEAR13XX=y
|
||||
CONFIG_MACH_SPEAR1310=y
|
||||
CONFIG_MACH_SPEAR1340=y
|
||||
CONFIG_ARCH_STI=y
|
||||
CONFIG_ARCH_STM32=y
|
||||
CONFIG_ARCH_EXYNOS=y
|
||||
CONFIG_EXYNOS5420_MCPM=y
|
||||
CONFIG_ARCH_RENESAS=y
|
||||
CONFIG_ARCH_EMEV2=y
|
||||
CONFIG_ARCH_R7S72100=y
|
||||
|
@ -99,40 +89,33 @@ CONFIG_ARCH_R8A7792=y
|
|||
CONFIG_ARCH_R8A7793=y
|
||||
CONFIG_ARCH_R8A7794=y
|
||||
CONFIG_ARCH_SH73A0=y
|
||||
CONFIG_ARCH_SOCFPGA=y
|
||||
CONFIG_PLAT_SPEAR=y
|
||||
CONFIG_ARCH_SPEAR13XX=y
|
||||
CONFIG_MACH_SPEAR1310=y
|
||||
CONFIG_MACH_SPEAR1340=y
|
||||
CONFIG_ARCH_STI=y
|
||||
CONFIG_ARCH_STM32=y
|
||||
CONFIG_ARCH_SUNXI=y
|
||||
CONFIG_ARCH_SIRF=y
|
||||
CONFIG_ARCH_TEGRA=y
|
||||
CONFIG_ARCH_TEGRA_2x_SOC=y
|
||||
CONFIG_ARCH_TEGRA_3x_SOC=y
|
||||
CONFIG_ARCH_TEGRA_114_SOC=y
|
||||
CONFIG_ARCH_TEGRA_124_SOC=y
|
||||
CONFIG_ARCH_UNIPHIER=y
|
||||
CONFIG_ARCH_U8500=y
|
||||
CONFIG_MACH_HREFV60=y
|
||||
CONFIG_MACH_SNOWBALL=y
|
||||
CONFIG_ARCH_VEXPRESS=y
|
||||
CONFIG_ARCH_VEXPRESS_TC2_PM=y
|
||||
CONFIG_ARCH_WM8850=y
|
||||
CONFIG_ARCH_ZYNQ=y
|
||||
CONFIG_TRUSTED_FOUNDATIONS=y
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCI_HOST_GENERIC=y
|
||||
CONFIG_PCI_DRA7XX=y
|
||||
CONFIG_PCI_DRA7XX_EP=y
|
||||
CONFIG_PCI_KEYSTONE=y
|
||||
CONFIG_PCI_MSI=y
|
||||
CONFIG_PCIEPORTBUS=y
|
||||
CONFIG_PCI_MVEBU=y
|
||||
CONFIG_PCI_TEGRA=y
|
||||
CONFIG_PCI_RCAR_GEN2=y
|
||||
CONFIG_PCIE_RCAR=y
|
||||
CONFIG_PCIEPORTBUS=y
|
||||
CONFIG_PCI_DRA7XX_EP=y
|
||||
CONFIG_PCI_KEYSTONE=y
|
||||
CONFIG_PCI_ENDPOINT=y
|
||||
CONFIG_PCI_ENDPOINT_CONFIGFS=y
|
||||
CONFIG_PCI_EPF_TEST=m
|
||||
CONFIG_SMP=y
|
||||
CONFIG_NR_CPUS=16
|
||||
CONFIG_HIGHPTE=y
|
||||
CONFIG_CMA=y
|
||||
CONFIG_SECCOMP=y
|
||||
CONFIG_ARM_APPENDED_DTB=y
|
||||
CONFIG_ARM_ATAG_DTB_COMPAT=y
|
||||
|
@ -145,14 +128,14 @@ CONFIG_CPU_FREQ_GOV_POWERSAVE=m
|
|||
CONFIG_CPU_FREQ_GOV_USERSPACE=m
|
||||
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
|
||||
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
|
||||
CONFIG_CPUFREQ_DT=y
|
||||
CONFIG_ARM_IMX6Q_CPUFREQ=y
|
||||
CONFIG_QORIQ_CPUFREQ=y
|
||||
CONFIG_CPU_IDLE=y
|
||||
CONFIG_ARM_CPUIDLE=y
|
||||
CONFIG_NEON=y
|
||||
CONFIG_KERNEL_MODE_NEON=y
|
||||
CONFIG_ARM_ZYNQ_CPUIDLE=y
|
||||
CONFIG_ARM_EXYNOS_CPUIDLE=y
|
||||
CONFIG_KERNEL_MODE_NEON=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
|
@ -170,23 +153,13 @@ CONFIG_IPV6_MIP6=m
|
|||
CONFIG_IPV6_TUNNEL=m
|
||||
CONFIG_IPV6_MULTIPLE_TABLES=y
|
||||
CONFIG_NET_DSA=m
|
||||
CONFIG_NET_SWITCHDEV=y
|
||||
CONFIG_CAN=y
|
||||
CONFIG_CAN_RAW=y
|
||||
CONFIG_CAN_BCM=y
|
||||
CONFIG_CAN_DEV=y
|
||||
CONFIG_CAN_AT91=m
|
||||
CONFIG_CAN_FLEXCAN=m
|
||||
CONFIG_CAN_RCAR=m
|
||||
CONFIG_CAN_XILINXCAN=y
|
||||
CONFIG_CAN_MCP251X=y
|
||||
CONFIG_NET_DSA_BCM_SF2=m
|
||||
CONFIG_B53=m
|
||||
CONFIG_B53_SPI_DRIVER=m
|
||||
CONFIG_B53_MDIO_DRIVER=m
|
||||
CONFIG_B53_MMAP_DRIVER=m
|
||||
CONFIG_B53_SRAB_DRIVER=m
|
||||
CONFIG_CAN_SUN4I=y
|
||||
CONFIG_CAN_XILINXCAN=y
|
||||
CONFIG_CAN_RCAR=m
|
||||
CONFIG_CAN_MCP251X=y
|
||||
CONFIG_BT=m
|
||||
CONFIG_BT_HCIUART=m
|
||||
CONFIG_BT_HCIUART_BCM=y
|
||||
|
@ -199,11 +172,9 @@ CONFIG_RFKILL_INPUT=y
|
|||
CONFIG_RFKILL_GPIO=y
|
||||
CONFIG_DEVTMPFS=y
|
||||
CONFIG_DEVTMPFS_MOUNT=y
|
||||
CONFIG_DMA_CMA=y
|
||||
CONFIG_CMA_SIZE_MBYTES=64
|
||||
CONFIG_OMAP_OCP2SCP=y
|
||||
CONFIG_SIMPLE_PM_BUS=y
|
||||
CONFIG_SUNXI_RSB=y
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
|
@ -236,7 +207,6 @@ CONFIG_PCI_ENDPOINT_TEST=m
|
|||
CONFIG_EEPROM_AT24=y
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_BLK_DEV_SR=y
|
||||
CONFIG_SCSI_MULTI_LUN=y
|
||||
CONFIG_ATA=y
|
||||
CONFIG_SATA_AHCI=y
|
||||
CONFIG_SATA_AHCI_PLATFORM=y
|
||||
|
@ -251,14 +221,20 @@ CONFIG_SATA_MV=y
|
|||
CONFIG_SATA_RCAR=y
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_VIRTIO_NET=y
|
||||
CONFIG_HIX5HD2_GMAC=y
|
||||
CONFIG_B53_SPI_DRIVER=m
|
||||
CONFIG_B53_MDIO_DRIVER=m
|
||||
CONFIG_B53_MMAP_DRIVER=m
|
||||
CONFIG_B53_SRAB_DRIVER=m
|
||||
CONFIG_NET_DSA_BCM_SF2=m
|
||||
CONFIG_SUN4I_EMAC=y
|
||||
CONFIG_MACB=y
|
||||
CONFIG_BCMGENET=m
|
||||
CONFIG_BGMAC_BCMA=y
|
||||
CONFIG_SYSTEMPORT=m
|
||||
CONFIG_MACB=y
|
||||
CONFIG_NET_CALXEDA_XGMAC=y
|
||||
CONFIG_GIANFAR=y
|
||||
CONFIG_HIX5HD2_GMAC=y
|
||||
CONFIG_E1000E=y
|
||||
CONFIG_IGB=y
|
||||
CONFIG_MV643XX_ETH=y
|
||||
CONFIG_MVNETA=y
|
||||
|
@ -268,19 +244,17 @@ CONFIG_R8169=y
|
|||
CONFIG_SH_ETH=y
|
||||
CONFIG_SMSC911X=y
|
||||
CONFIG_STMMAC_ETH=y
|
||||
CONFIG_STMMAC_PLATFORM=y
|
||||
CONFIG_DWMAC_DWC_QOS_ETH=y
|
||||
CONFIG_TI_CPSW=y
|
||||
CONFIG_XILINX_EMACLITE=y
|
||||
CONFIG_AT803X_PHY=y
|
||||
CONFIG_MARVELL_PHY=y
|
||||
CONFIG_SMSC_PHY=y
|
||||
CONFIG_BROADCOM_PHY=y
|
||||
CONFIG_ICPLUS_PHY=y
|
||||
CONFIG_REALTEK_PHY=y
|
||||
CONFIG_MARVELL_PHY=y
|
||||
CONFIG_MICREL_PHY=y
|
||||
CONFIG_FIXED_PHY=y
|
||||
CONFIG_REALTEK_PHY=y
|
||||
CONFIG_ROCKCHIP_PHY=y
|
||||
CONFIG_SMSC_PHY=y
|
||||
CONFIG_USB_PEGASUS=y
|
||||
CONFIG_USB_RTL8152=m
|
||||
CONFIG_USB_LAN78XX=m
|
||||
|
@ -288,29 +262,29 @@ CONFIG_USB_USBNET=y
|
|||
CONFIG_USB_NET_SMSC75XX=y
|
||||
CONFIG_USB_NET_SMSC95XX=y
|
||||
CONFIG_BRCMFMAC=m
|
||||
CONFIG_RT2X00=m
|
||||
CONFIG_RT2800USB=m
|
||||
CONFIG_MWIFIEX=m
|
||||
CONFIG_MWIFIEX_SDIO=m
|
||||
CONFIG_RT2X00=m
|
||||
CONFIG_RT2800USB=m
|
||||
CONFIG_INPUT_JOYDEV=y
|
||||
CONFIG_INPUT_EVDEV=y
|
||||
CONFIG_KEYBOARD_QT1070=m
|
||||
CONFIG_KEYBOARD_GPIO=y
|
||||
CONFIG_KEYBOARD_TEGRA=y
|
||||
CONFIG_KEYBOARD_SPEAR=y
|
||||
CONFIG_KEYBOARD_ST_KEYSCAN=y
|
||||
CONFIG_KEYBOARD_CROS_EC=m
|
||||
CONFIG_KEYBOARD_SAMSUNG=m
|
||||
CONFIG_KEYBOARD_ST_KEYSCAN=y
|
||||
CONFIG_KEYBOARD_SPEAR=y
|
||||
CONFIG_KEYBOARD_CROS_EC=m
|
||||
CONFIG_MOUSE_PS2_ELANTECH=y
|
||||
CONFIG_MOUSE_CYAPA=m
|
||||
CONFIG_MOUSE_ELAN_I2C=y
|
||||
CONFIG_INPUT_TOUCHSCREEN=y
|
||||
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
|
||||
CONFIG_TOUCHSCREEN_MMS114=m
|
||||
CONFIG_TOUCHSCREEN_WM97XX=m
|
||||
CONFIG_TOUCHSCREEN_ST1232=m
|
||||
CONFIG_TOUCHSCREEN_STMPE=y
|
||||
CONFIG_TOUCHSCREEN_SUN4I=y
|
||||
CONFIG_TOUCHSCREEN_WM97XX=m
|
||||
CONFIG_INPUT_MISC=y
|
||||
CONFIG_INPUT_MAX77693_HAPTIC=m
|
||||
CONFIG_INPUT_MAX8997_HAPTIC=m
|
||||
|
@ -327,13 +301,12 @@ CONFIG_SERIAL_8250_DW=y
|
|||
CONFIG_SERIAL_8250_EM=y
|
||||
CONFIG_SERIAL_8250_MT6577=y
|
||||
CONFIG_SERIAL_8250_UNIPHIER=y
|
||||
CONFIG_SERIAL_OF_PLATFORM=y
|
||||
CONFIG_SERIAL_AMBA_PL011=y
|
||||
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
CONFIG_SERIAL_ATMEL_TTYAT=y
|
||||
CONFIG_SERIAL_BCM63XX=y
|
||||
CONFIG_SERIAL_BCM63XX_CONSOLE=y
|
||||
CONFIG_SERIAL_MESON=y
|
||||
CONFIG_SERIAL_MESON_CONSOLE=y
|
||||
CONFIG_SERIAL_SAMSUNG=y
|
||||
|
@ -345,15 +318,14 @@ CONFIG_SERIAL_IMX=y
|
|||
CONFIG_SERIAL_IMX_CONSOLE=y
|
||||
CONFIG_SERIAL_SH_SCI=y
|
||||
CONFIG_SERIAL_SH_SCI_NR_UARTS=20
|
||||
CONFIG_SERIAL_SH_SCI_CONSOLE=y
|
||||
CONFIG_SERIAL_SH_SCI_DMA=y
|
||||
CONFIG_SERIAL_MSM=y
|
||||
CONFIG_SERIAL_MSM_CONSOLE=y
|
||||
CONFIG_SERIAL_VT8500=y
|
||||
CONFIG_SERIAL_VT8500_CONSOLE=y
|
||||
CONFIG_SERIAL_OF_PLATFORM=y
|
||||
CONFIG_SERIAL_OMAP=y
|
||||
CONFIG_SERIAL_OMAP_CONSOLE=y
|
||||
CONFIG_SERIAL_BCM63XX=y
|
||||
CONFIG_SERIAL_BCM63XX_CONSOLE=y
|
||||
CONFIG_SERIAL_XILINX_PS_UART=y
|
||||
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
|
||||
CONFIG_SERIAL_FSL_LPUART=y
|
||||
|
@ -365,12 +337,10 @@ CONFIG_SERIAL_ST_ASC_CONSOLE=y
|
|||
CONFIG_SERIAL_STM32=y
|
||||
CONFIG_SERIAL_STM32_CONSOLE=y
|
||||
CONFIG_SERIAL_DEV_BUS=y
|
||||
CONFIG_HVC_DRIVER=y
|
||||
CONFIG_VIRTIO_CONSOLE=y
|
||||
CONFIG_HW_RANDOM=y
|
||||
CONFIG_HW_RANDOM_ST=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_DAVINCI=y
|
||||
CONFIG_I2C_MESON=y
|
||||
CONFIG_I2C_MUX=y
|
||||
CONFIG_I2C_ARB_GPIO_CHALLENGE=m
|
||||
CONFIG_I2C_MUX_PCA954x=y
|
||||
CONFIG_I2C_MUX_PINCTRL=y
|
||||
|
@ -378,12 +348,13 @@ CONFIG_I2C_DEMUX_PINCTRL=y
|
|||
CONFIG_I2C_AT91=m
|
||||
CONFIG_I2C_BCM2835=y
|
||||
CONFIG_I2C_CADENCE=y
|
||||
CONFIG_I2C_DAVINCI=y
|
||||
CONFIG_I2C_DESIGNWARE_PLATFORM=y
|
||||
CONFIG_I2C_DIGICOLOR=m
|
||||
CONFIG_I2C_EMEV2=m
|
||||
CONFIG_I2C_GPIO=m
|
||||
CONFIG_I2C_EXYNOS5=y
|
||||
CONFIG_I2C_IMX=y
|
||||
CONFIG_I2C_MESON=y
|
||||
CONFIG_I2C_MV64XXX=y
|
||||
CONFIG_I2C_RIIC=y
|
||||
CONFIG_I2C_RK3X=y
|
||||
|
@ -427,7 +398,6 @@ CONFIG_SPI_SPIDEV=y
|
|||
CONFIG_SPMI=y
|
||||
CONFIG_PINCTRL_AS3722=y
|
||||
CONFIG_PINCTRL_PALMAS=y
|
||||
CONFIG_PINCTRL_BCM2835=y
|
||||
CONFIG_PINCTRL_APQ8064=y
|
||||
CONFIG_PINCTRL_APQ8084=y
|
||||
CONFIG_PINCTRL_IPQ8064=y
|
||||
|
@ -437,25 +407,33 @@ CONFIG_PINCTRL_MSM8X74=y
|
|||
CONFIG_PINCTRL_MSM8916=y
|
||||
CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
|
||||
CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
|
||||
CONFIG_GPIO_GENERIC_PLATFORM=y
|
||||
CONFIG_GPIO_DAVINCI=y
|
||||
CONFIG_GPIO_DWAPB=y
|
||||
CONFIG_GPIO_EM=y
|
||||
CONFIG_GPIO_RCAR=y
|
||||
CONFIG_GPIO_SYSCON=y
|
||||
CONFIG_GPIO_UNIPHIER=y
|
||||
CONFIG_GPIO_XILINX=y
|
||||
CONFIG_GPIO_ZYNQ=y
|
||||
CONFIG_GPIO_PCA953X=y
|
||||
CONFIG_GPIO_PCA953X_IRQ=y
|
||||
CONFIG_GPIO_PCF857X=y
|
||||
CONFIG_GPIO_TWL4030=y
|
||||
CONFIG_GPIO_PALMAS=y
|
||||
CONFIG_GPIO_SYSCON=y
|
||||
CONFIG_GPIO_TPS6586X=y
|
||||
CONFIG_GPIO_TPS65910=y
|
||||
CONFIG_GPIO_TWL4030=y
|
||||
CONFIG_POWER_AVS=y
|
||||
CONFIG_ROCKCHIP_IODOMAIN=y
|
||||
CONFIG_POWER_RESET_AS3722=y
|
||||
CONFIG_POWER_RESET_GPIO=y
|
||||
CONFIG_POWER_RESET_GPIO_RESTART=y
|
||||
CONFIG_POWER_RESET_ST=y
|
||||
CONFIG_POWER_RESET_KEYSTONE=y
|
||||
CONFIG_POWER_RESET_RMOBILE=y
|
||||
CONFIG_BATTERY_ACT8945A=y
|
||||
CONFIG_BATTERY_CPCAP=m
|
||||
CONFIG_BATTERY_SBS=y
|
||||
CONFIG_AXP20X_POWER=m
|
||||
CONFIG_BATTERY_MAX17040=m
|
||||
CONFIG_BATTERY_MAX17042=m
|
||||
CONFIG_CHARGER_CPCAP=m
|
||||
|
@ -464,15 +442,6 @@ CONFIG_CHARGER_MAX77693=m
|
|||
CONFIG_CHARGER_MAX8997=m
|
||||
CONFIG_CHARGER_MAX8998=m
|
||||
CONFIG_CHARGER_TPS65090=y
|
||||
CONFIG_AXP20X_POWER=m
|
||||
CONFIG_POWER_RESET_AS3722=y
|
||||
CONFIG_POWER_RESET_GPIO=y
|
||||
CONFIG_POWER_RESET_GPIO_RESTART=y
|
||||
CONFIG_POWER_RESET_KEYSTONE=y
|
||||
CONFIG_POWER_RESET_RMOBILE=y
|
||||
CONFIG_POWER_RESET_ST=y
|
||||
CONFIG_POWER_AVS=y
|
||||
CONFIG_ROCKCHIP_IODOMAIN=y
|
||||
CONFIG_SENSORS_IIO_HWMON=y
|
||||
CONFIG_SENSORS_LM90=y
|
||||
CONFIG_SENSORS_LM95245=y
|
||||
|
@ -480,14 +449,12 @@ CONFIG_SENSORS_NTC_THERMISTOR=m
|
|||
CONFIG_SENSORS_PWM_FAN=m
|
||||
CONFIG_SENSORS_INA2XX=m
|
||||
CONFIG_CPU_THERMAL=y
|
||||
CONFIG_BCM2835_THERMAL=m
|
||||
CONFIG_BRCMSTB_THERMAL=m
|
||||
CONFIG_IMX_THERMAL=y
|
||||
CONFIG_ROCKCHIP_THERMAL=y
|
||||
CONFIG_RCAR_THERMAL=y
|
||||
CONFIG_ARMADA_THERMAL=y
|
||||
CONFIG_DAVINCI_WATCHDOG=m
|
||||
CONFIG_EXYNOS_THERMAL=m
|
||||
CONFIG_BCM2835_THERMAL=m
|
||||
CONFIG_BRCMSTB_THERMAL=m
|
||||
CONFIG_ST_THERMAL_MEMMAP=y
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_DA9063_WATCHDOG=m
|
||||
|
@ -495,20 +462,24 @@ CONFIG_XILINX_WATCHDOG=y
|
|||
CONFIG_ARM_SP805_WATCHDOG=y
|
||||
CONFIG_AT91SAM9X_WATCHDOG=y
|
||||
CONFIG_SAMA5D4_WATCHDOG=y
|
||||
CONFIG_DW_WATCHDOG=y
|
||||
CONFIG_DAVINCI_WATCHDOG=m
|
||||
CONFIG_ORION_WATCHDOG=y
|
||||
CONFIG_RN5T618_WATCHDOG=y
|
||||
CONFIG_ST_LPC_WATCHDOG=y
|
||||
CONFIG_SUNXI_WATCHDOG=y
|
||||
CONFIG_IMX2_WDT=y
|
||||
CONFIG_ST_LPC_WATCHDOG=y
|
||||
CONFIG_TEGRA_WATCHDOG=m
|
||||
CONFIG_MESON_WATCHDOG=y
|
||||
CONFIG_DW_WATCHDOG=y
|
||||
CONFIG_DIGICOLOR_WATCHDOG=y
|
||||
CONFIG_RENESAS_WDT=m
|
||||
CONFIG_BCM2835_WDT=y
|
||||
CONFIG_BCM47XX_WDT=y
|
||||
CONFIG_BCM7038_WDT=m
|
||||
CONFIG_BCM2835_WDT=y
|
||||
CONFIG_BCM_KONA_WDT=y
|
||||
CONFIG_BCM7038_WDT=m
|
||||
CONFIG_BCMA_HOST_SOC=y
|
||||
CONFIG_BCMA_DRIVER_GMAC_CMN=y
|
||||
CONFIG_BCMA_DRIVER_GPIO=y
|
||||
CONFIG_MFD_ACT8945A=y
|
||||
CONFIG_MFD_AS3711=y
|
||||
CONFIG_MFD_AS3722=y
|
||||
|
@ -516,7 +487,6 @@ CONFIG_MFD_ATMEL_FLEXCOM=y
|
|||
CONFIG_MFD_ATMEL_HLCDC=m
|
||||
CONFIG_MFD_BCM590XX=y
|
||||
CONFIG_MFD_AC100=y
|
||||
CONFIG_MFD_AXP20X=y
|
||||
CONFIG_MFD_AXP20X_I2C=y
|
||||
CONFIG_MFD_AXP20X_RSB=y
|
||||
CONFIG_MFD_CROS_EC=m
|
||||
|
@ -529,11 +499,11 @@ CONFIG_MFD_MAX77693=m
|
|||
CONFIG_MFD_MAX8907=y
|
||||
CONFIG_MFD_MAX8997=y
|
||||
CONFIG_MFD_MAX8998=y
|
||||
CONFIG_MFD_RK808=y
|
||||
CONFIG_MFD_CPCAP=y
|
||||
CONFIG_MFD_PM8XXX=y
|
||||
CONFIG_MFD_QCOM_RPM=y
|
||||
CONFIG_MFD_SPMI_PMIC=y
|
||||
CONFIG_MFD_RK808=y
|
||||
CONFIG_MFD_RN5T618=y
|
||||
CONFIG_MFD_SEC_CORE=y
|
||||
CONFIG_MFD_STMPE=y
|
||||
|
@ -543,10 +513,10 @@ CONFIG_MFD_TPS65217=y
|
|||
CONFIG_MFD_TPS65218=y
|
||||
CONFIG_MFD_TPS6586X=y
|
||||
CONFIG_MFD_TPS65910=y
|
||||
CONFIG_REGULATOR_ACT8945A=y
|
||||
CONFIG_REGULATOR_AB8500=y
|
||||
CONFIG_REGULATOR_ACT8865=y
|
||||
CONFIG_REGULATOR_ACT8945A=y
|
||||
CONFIG_REGULATOR_ANATOP=y
|
||||
CONFIG_REGULATOR_AB8500=y
|
||||
CONFIG_REGULATOR_AS3711=y
|
||||
CONFIG_REGULATOR_AS3722=y
|
||||
CONFIG_REGULATOR_AXP20X=y
|
||||
|
@ -554,10 +524,7 @@ CONFIG_REGULATOR_BCM590XX=y
|
|||
CONFIG_REGULATOR_CPCAP=y
|
||||
CONFIG_REGULATOR_DA9210=y
|
||||
CONFIG_REGULATOR_FAN53555=y
|
||||
CONFIG_REGULATOR_RK808=y
|
||||
CONFIG_REGULATOR_GPIO=y
|
||||
CONFIG_MFD_SYSCON=y
|
||||
CONFIG_POWER_RESET_SYSCON=y
|
||||
CONFIG_REGULATOR_LP872X=y
|
||||
CONFIG_REGULATOR_MAX14577=m
|
||||
CONFIG_REGULATOR_MAX8907=y
|
||||
|
@ -571,7 +538,8 @@ CONFIG_REGULATOR_PALMAS=y
|
|||
CONFIG_REGULATOR_PBIAS=y
|
||||
CONFIG_REGULATOR_PWM=y
|
||||
CONFIG_REGULATOR_QCOM_RPM=y
|
||||
CONFIG_REGULATOR_QCOM_SMD_RPM=y
|
||||
CONFIG_REGULATOR_QCOM_SMD_RPM=m
|
||||
CONFIG_REGULATOR_RK808=y
|
||||
CONFIG_REGULATOR_RN5T618=y
|
||||
CONFIG_REGULATOR_S2MPS11=y
|
||||
CONFIG_REGULATOR_S5M8767=y
|
||||
|
@ -592,18 +560,17 @@ CONFIG_MEDIA_CEC_SUPPORT=y
|
|||
CONFIG_MEDIA_CONTROLLER=y
|
||||
CONFIG_VIDEO_V4L2_SUBDEV_API=y
|
||||
CONFIG_MEDIA_USB_SUPPORT=y
|
||||
CONFIG_USB_VIDEO_CLASS=y
|
||||
CONFIG_USB_GSPCA=y
|
||||
CONFIG_USB_VIDEO_CLASS=m
|
||||
CONFIG_V4L_PLATFORM_DRIVERS=y
|
||||
CONFIG_SOC_CAMERA=m
|
||||
CONFIG_SOC_CAMERA_PLATFORM=m
|
||||
CONFIG_VIDEO_RCAR_VIN=m
|
||||
CONFIG_VIDEO_ATMEL_ISI=m
|
||||
CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=m
|
||||
CONFIG_VIDEO_S5P_FIMC=m
|
||||
CONFIG_VIDEO_S5P_MIPI_CSIS=m
|
||||
CONFIG_VIDEO_EXYNOS_FIMC_LITE=m
|
||||
CONFIG_VIDEO_EXYNOS4_FIMC_IS=m
|
||||
CONFIG_VIDEO_RCAR_VIN=m
|
||||
CONFIG_VIDEO_ATMEL_ISI=m
|
||||
CONFIG_V4L_MEM2MEM_DRIVERS=y
|
||||
CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
|
||||
CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
|
||||
|
@ -614,19 +581,15 @@ CONFIG_VIDEO_STI_DELTA=m
|
|||
CONFIG_VIDEO_RENESAS_JPU=m
|
||||
CONFIG_VIDEO_RENESAS_VSP1=m
|
||||
CONFIG_V4L_TEST_DRIVERS=y
|
||||
CONFIG_VIDEO_VIVID=m
|
||||
CONFIG_CEC_PLATFORM_DRIVERS=y
|
||||
CONFIG_VIDEO_SAMSUNG_S5P_CEC=m
|
||||
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
|
||||
CONFIG_VIDEO_ADV7180=m
|
||||
CONFIG_VIDEO_ML86V7667=m
|
||||
CONFIG_DRM=y
|
||||
CONFIG_DRM_I2C_ADV7511=m
|
||||
CONFIG_DRM_I2C_ADV7511_AUDIO=y
|
||||
# CONFIG_DRM_I2C_CH7006 is not set
|
||||
# CONFIG_DRM_I2C_SIL164 is not set
|
||||
CONFIG_DRM_DUMB_VGA_DAC=m
|
||||
CONFIG_DRM_NXP_PTN3460=m
|
||||
CONFIG_DRM_PARADE_PS8622=m
|
||||
CONFIG_DRM_NOUVEAU=m
|
||||
CONFIG_DRM_EXYNOS=m
|
||||
CONFIG_DRM_EXYNOS_FIMD=y
|
||||
|
@ -645,13 +608,18 @@ CONFIG_DRM_RCAR_LVDS=y
|
|||
CONFIG_DRM_SUN4I=m
|
||||
CONFIG_DRM_FSL_DCU=m
|
||||
CONFIG_DRM_TEGRA=y
|
||||
CONFIG_DRM_PANEL_SIMPLE=y
|
||||
CONFIG_DRM_PANEL_SAMSUNG_LD9040=m
|
||||
CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=m
|
||||
CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m
|
||||
CONFIG_DRM_PANEL_SIMPLE=y
|
||||
CONFIG_DRM_DUMB_VGA_DAC=m
|
||||
CONFIG_DRM_NXP_PTN3460=m
|
||||
CONFIG_DRM_PARADE_PS8622=m
|
||||
CONFIG_DRM_SII9234=m
|
||||
CONFIG_DRM_I2C_ADV7511=m
|
||||
CONFIG_DRM_I2C_ADV7511_AUDIO=y
|
||||
CONFIG_DRM_STI=m
|
||||
CONFIG_DRM_VC4=y
|
||||
CONFIG_DRM_VC4=m
|
||||
CONFIG_DRM_ETNAVIV=m
|
||||
CONFIG_DRM_MXSFB=m
|
||||
CONFIG_FB_ARMCLCD=y
|
||||
|
@ -659,8 +627,6 @@ CONFIG_FB_EFI=y
|
|||
CONFIG_FB_WM8505=y
|
||||
CONFIG_FB_SH_MOBILE_LCDC=y
|
||||
CONFIG_FB_SIMPLE=y
|
||||
CONFIG_BACKLIGHT_LCD_SUPPORT=y
|
||||
CONFIG_BACKLIGHT_CLASS_DEVICE=y
|
||||
CONFIG_LCD_PLATFORM=m
|
||||
CONFIG_BACKLIGHT_PWM=y
|
||||
CONFIG_BACKLIGHT_AS3711=y
|
||||
|
@ -668,7 +634,6 @@ CONFIG_FRAMEBUFFER_CONSOLE=y
|
|||
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
|
||||
CONFIG_SOUND=m
|
||||
CONFIG_SND=m
|
||||
CONFIG_SND_DYNAMIC_MINORS=y
|
||||
CONFIG_SND_HDA_TEGRA=m
|
||||
CONFIG_SND_HDA_INPUT_BEEP=y
|
||||
CONFIG_SND_HDA_PATCH_LOADER=y
|
||||
|
@ -692,7 +657,7 @@ CONFIG_SND_SOC_SNOW=m
|
|||
CONFIG_SND_SOC_ODROID=m
|
||||
CONFIG_SND_SOC_SH4_FSI=m
|
||||
CONFIG_SND_SOC_RCAR=m
|
||||
CONFIG_SND_SIMPLE_SCU_CARD=m
|
||||
CONFIG_SND_SOC_STI=m
|
||||
CONFIG_SND_SUN4I_CODEC=m
|
||||
CONFIG_SND_SOC_TEGRA=m
|
||||
CONFIG_SND_SOC_TEGRA20_I2S=m
|
||||
|
@ -703,31 +668,25 @@ CONFIG_SND_SOC_TEGRA_WM8903=m
|
|||
CONFIG_SND_SOC_TEGRA_WM9712=m
|
||||
CONFIG_SND_SOC_TEGRA_TRIMSLICE=m
|
||||
CONFIG_SND_SOC_TEGRA_ALC5632=m
|
||||
CONFIG_SND_SOC_CPCAP=m
|
||||
CONFIG_SND_SOC_TEGRA_MAX98090=m
|
||||
CONFIG_SND_SOC_AK4642=m
|
||||
CONFIG_SND_SOC_CPCAP=m
|
||||
CONFIG_SND_SOC_SGTL5000=m
|
||||
CONFIG_SND_SOC_SPDIF=m
|
||||
CONFIG_SND_SOC_WM8978=m
|
||||
CONFIG_SND_SOC_STI=m
|
||||
CONFIG_SND_SOC_STI_SAS=m
|
||||
CONFIG_SND_SIMPLE_CARD=m
|
||||
CONFIG_SND_SOC_WM8978=m
|
||||
CONFIG_SND_SIMPLE_SCU_CARD=m
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_OTG=y
|
||||
CONFIG_USB_XHCI_HCD=y
|
||||
CONFIG_USB_XHCI_MVEBU=y
|
||||
CONFIG_USB_XHCI_RCAR=m
|
||||
CONFIG_USB_XHCI_TEGRA=m
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_EHCI_MSM=m
|
||||
CONFIG_USB_EHCI_EXYNOS=y
|
||||
CONFIG_USB_EHCI_TEGRA=y
|
||||
CONFIG_USB_EHCI_HCD_STI=y
|
||||
CONFIG_USB_EHCI_HCD_PLATFORM=y
|
||||
CONFIG_USB_ISP1760=y
|
||||
CONFIG_USB_EHCI_TEGRA=y
|
||||
CONFIG_USB_EHCI_EXYNOS=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_OHCI_HCD_STI=y
|
||||
CONFIG_USB_OHCI_HCD_PLATFORM=y
|
||||
CONFIG_USB_OHCI_EXYNOS=m
|
||||
CONFIG_USB_R8A66597_HCD=m
|
||||
CONFIG_USB_RENESAS_USBHS=m
|
||||
|
@ -746,18 +705,18 @@ CONFIG_USB_TI_CPPI41_DMA=y
|
|||
CONFIG_USB_TUSB_OMAP_DMA=y
|
||||
CONFIG_USB_DWC3=y
|
||||
CONFIG_USB_DWC2=y
|
||||
CONFIG_USB_HSIC_USB3503=y
|
||||
CONFIG_USB_CHIPIDEA=y
|
||||
CONFIG_USB_CHIPIDEA_UDC=y
|
||||
CONFIG_USB_CHIPIDEA_HOST=y
|
||||
CONFIG_USB_ISP1760=y
|
||||
CONFIG_USB_HSIC_USB3503=y
|
||||
CONFIG_AB8500_USB=y
|
||||
CONFIG_KEYSTONE_USB_PHY=y
|
||||
CONFIG_KEYSTONE_USB_PHY=m
|
||||
CONFIG_NOP_USB_XCEIV=m
|
||||
CONFIG_AM335X_PHY_USB=m
|
||||
CONFIG_TWL6030_USB=m
|
||||
CONFIG_USB_GPIO_VBUS=y
|
||||
CONFIG_USB_ISP1301=y
|
||||
CONFIG_USB_MSM_OTG=m
|
||||
CONFIG_USB_MXS_PHY=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_FSL_USB2=y
|
||||
|
@ -793,21 +752,20 @@ CONFIG_MMC_SDHCI_OF_ESDHC=y
|
|||
CONFIG_MMC_SDHCI_ESDHC_IMX=y
|
||||
CONFIG_MMC_SDHCI_DOVE=y
|
||||
CONFIG_MMC_SDHCI_TEGRA=y
|
||||
CONFIG_MMC_SDHCI_S3C=y
|
||||
CONFIG_MMC_SDHCI_PXAV3=y
|
||||
CONFIG_MMC_SDHCI_SPEAR=y
|
||||
CONFIG_MMC_SDHCI_S3C=y
|
||||
CONFIG_MMC_SDHCI_S3C_DMA=y
|
||||
CONFIG_MMC_SDHCI_BCM_KONA=y
|
||||
CONFIG_MMC_MESON_MX_SDIO=y
|
||||
CONFIG_MMC_SDHCI_ST=y
|
||||
CONFIG_MMC_OMAP=y
|
||||
CONFIG_MMC_OMAP_HS=y
|
||||
CONFIG_MMC_ATMELMCI=y
|
||||
CONFIG_MMC_SDHCI_MSM=y
|
||||
CONFIG_MMC_MESON_MX_SDIO=y
|
||||
CONFIG_MMC_MVSDIO=y
|
||||
CONFIG_MMC_SDHI=y
|
||||
CONFIG_MMC_DW=y
|
||||
CONFIG_MMC_DW_PLTFM=y
|
||||
CONFIG_MMC_DW_EXYNOS=y
|
||||
CONFIG_MMC_DW_ROCKCHIP=y
|
||||
CONFIG_MMC_SH_MMCIF=y
|
||||
|
@ -847,94 +805,85 @@ CONFIG_RTC_DRV_MAX77686=y
|
|||
CONFIG_RTC_DRV_RK808=m
|
||||
CONFIG_RTC_DRV_RS5C372=m
|
||||
CONFIG_RTC_DRV_BQ32K=m
|
||||
CONFIG_RTC_DRV_PALMAS=y
|
||||
CONFIG_RTC_DRV_ST_LPC=y
|
||||
CONFIG_RTC_DRV_TWL4030=y
|
||||
CONFIG_RTC_DRV_PALMAS=y
|
||||
CONFIG_RTC_DRV_TPS6586X=y
|
||||
CONFIG_RTC_DRV_TPS65910=y
|
||||
CONFIG_RTC_DRV_S35390A=m
|
||||
CONFIG_RTC_DRV_RX8581=m
|
||||
CONFIG_RTC_DRV_EM3027=y
|
||||
CONFIG_RTC_DRV_S5M=m
|
||||
CONFIG_RTC_DRV_DA9063=m
|
||||
CONFIG_RTC_DRV_EFI=m
|
||||
CONFIG_RTC_DRV_DIGICOLOR=m
|
||||
CONFIG_RTC_DRV_S5M=m
|
||||
CONFIG_RTC_DRV_S3C=m
|
||||
CONFIG_RTC_DRV_PL031=y
|
||||
CONFIG_RTC_DRV_AT91RM9200=m
|
||||
CONFIG_RTC_DRV_AT91SAM9=m
|
||||
CONFIG_RTC_DRV_VT8500=y
|
||||
CONFIG_RTC_DRV_SUN6I=y
|
||||
CONFIG_RTC_DRV_SUNXI=y
|
||||
CONFIG_RTC_DRV_MV=y
|
||||
CONFIG_RTC_DRV_TEGRA=y
|
||||
CONFIG_RTC_DRV_ST_LPC=y
|
||||
CONFIG_RTC_DRV_CPCAP=m
|
||||
CONFIG_DMADEVICES=y
|
||||
CONFIG_DW_DMAC=y
|
||||
CONFIG_AT_HDMAC=y
|
||||
CONFIG_AT_XDMAC=y
|
||||
CONFIG_DMA_BCM2835=y
|
||||
CONFIG_DMA_SUN6I=y
|
||||
CONFIG_FSL_EDMA=y
|
||||
CONFIG_IMX_DMA=y
|
||||
CONFIG_IMX_SDMA=y
|
||||
CONFIG_MV_XOR=y
|
||||
CONFIG_MXS_DMA=y
|
||||
CONFIG_PL330_DMA=y
|
||||
CONFIG_SIRF_DMA=y
|
||||
CONFIG_STE_DMA40=y
|
||||
CONFIG_ST_FDMA=m
|
||||
CONFIG_TEGRA20_APB_DMA=y
|
||||
CONFIG_XILINX_DMA=y
|
||||
CONFIG_QCOM_BAM_DMA=y
|
||||
CONFIG_DW_DMAC=y
|
||||
CONFIG_SH_DMAE=y
|
||||
CONFIG_RCAR_DMAC=y
|
||||
CONFIG_RENESAS_USB_DMAC=m
|
||||
CONFIG_STE_DMA40=y
|
||||
CONFIG_SIRF_DMA=y
|
||||
CONFIG_TI_EDMA=y
|
||||
CONFIG_PL330_DMA=y
|
||||
CONFIG_IMX_SDMA=y
|
||||
CONFIG_IMX_DMA=y
|
||||
CONFIG_MXS_DMA=y
|
||||
CONFIG_DMA_BCM2835=y
|
||||
CONFIG_DMA_OMAP=y
|
||||
CONFIG_QCOM_BAM_DMA=y
|
||||
CONFIG_XILINX_DMA=y
|
||||
CONFIG_DMA_SUN6I=y
|
||||
CONFIG_ST_FDMA=m
|
||||
CONFIG_VIRTIO_PCI=y
|
||||
CONFIG_VIRTIO_MMIO=y
|
||||
CONFIG_STAGING=y
|
||||
CONFIG_SENSORS_ISL29018=y
|
||||
CONFIG_SENSORS_ISL29028=y
|
||||
CONFIG_MFD_NVEC=y
|
||||
CONFIG_KEYBOARD_NVEC=y
|
||||
CONFIG_SERIO_NVEC_PS2=y
|
||||
CONFIG_NVEC_POWER=y
|
||||
CONFIG_NVEC_PAZ00=y
|
||||
CONFIG_BCMA=y
|
||||
CONFIG_BCMA_HOST_SOC=y
|
||||
CONFIG_BCMA_DRIVER_GMAC_CMN=y
|
||||
CONFIG_BCMA_DRIVER_GPIO=y
|
||||
CONFIG_QCOM_GSBI=y
|
||||
CONFIG_QCOM_PM=y
|
||||
CONFIG_QCOM_SMEM=y
|
||||
CONFIG_QCOM_SMD_RPM=y
|
||||
CONFIG_QCOM_SMP2P=y
|
||||
CONFIG_QCOM_SMSM=y
|
||||
CONFIG_QCOM_WCNSS_CTRL=m
|
||||
CONFIG_ROCKCHIP_PM_DOMAINS=y
|
||||
CONFIG_COMMON_CLK_QCOM=y
|
||||
CONFIG_QCOM_CLK_RPM=y
|
||||
CONFIG_CHROME_PLATFORMS=y
|
||||
CONFIG_STAGING_BOARD=y
|
||||
CONFIG_CROS_EC_CHARDEV=m
|
||||
CONFIG_COMMON_CLK_MAX77686=y
|
||||
CONFIG_COMMON_CLK_RK808=m
|
||||
CONFIG_COMMON_CLK_S2MPS11=m
|
||||
CONFIG_COMMON_CLK_QCOM=y
|
||||
CONFIG_QCOM_CLK_RPM=y
|
||||
CONFIG_APQ_MMCC_8084=y
|
||||
CONFIG_MSM_GCC_8660=y
|
||||
CONFIG_MSM_MMCC_8960=y
|
||||
CONFIG_MSM_MMCC_8974=y
|
||||
CONFIG_HWSPINLOCK_QCOM=y
|
||||
CONFIG_BCM2835_MBOX=y
|
||||
CONFIG_ROCKCHIP_IOMMU=y
|
||||
CONFIG_TEGRA_IOMMU_GART=y
|
||||
CONFIG_TEGRA_IOMMU_SMMU=y
|
||||
CONFIG_REMOTEPROC=m
|
||||
CONFIG_ST_REMOTEPROC=m
|
||||
CONFIG_RPMSG_VIRTIO=m
|
||||
CONFIG_RASPBERRYPI_POWER=y
|
||||
CONFIG_QCOM_GSBI=y
|
||||
CONFIG_QCOM_PM=y
|
||||
CONFIG_QCOM_SMD_RPM=m
|
||||
CONFIG_QCOM_WCNSS_CTRL=m
|
||||
CONFIG_ROCKCHIP_PM_DOMAINS=y
|
||||
CONFIG_ARCH_TEGRA_2x_SOC=y
|
||||
CONFIG_ARCH_TEGRA_3x_SOC=y
|
||||
CONFIG_ARCH_TEGRA_114_SOC=y
|
||||
CONFIG_ARCH_TEGRA_124_SOC=y
|
||||
CONFIG_PM_DEVFREQ=y
|
||||
CONFIG_ARM_TEGRA_DEVFREQ=m
|
||||
CONFIG_MEMORY=y
|
||||
CONFIG_EXTCON=y
|
||||
CONFIG_TI_AEMIF=y
|
||||
CONFIG_IIO=y
|
||||
CONFIG_IIO_SW_TRIGGER=y
|
||||
|
@ -947,56 +896,54 @@ CONFIG_VF610_ADC=m
|
|||
CONFIG_XILINX_XADC=y
|
||||
CONFIG_MPU3050_I2C=y
|
||||
CONFIG_CM36651=m
|
||||
CONFIG_SENSORS_ISL29018=y
|
||||
CONFIG_SENSORS_ISL29028=y
|
||||
CONFIG_AK8975=y
|
||||
CONFIG_RASPBERRYPI_POWER=y
|
||||
CONFIG_IIO_HRTIMER_TRIGGER=y
|
||||
CONFIG_PWM=y
|
||||
CONFIG_PWM_ATMEL=m
|
||||
CONFIG_PWM_ATMEL_HLCDC_PWM=m
|
||||
CONFIG_PWM_ATMEL_TCB=m
|
||||
CONFIG_PWM_BCM2835=y
|
||||
CONFIG_PWM_BRCMSTB=m
|
||||
CONFIG_PWM_FSL_FTM=m
|
||||
CONFIG_PWM_MESON=m
|
||||
CONFIG_PWM_RCAR=m
|
||||
CONFIG_PWM_RENESAS_TPU=y
|
||||
CONFIG_PWM_ROCKCHIP=m
|
||||
CONFIG_PWM_SAMSUNG=m
|
||||
CONFIG_PWM_STI=y
|
||||
CONFIG_PWM_SUN4I=y
|
||||
CONFIG_PWM_TEGRA=y
|
||||
CONFIG_PWM_VT8500=y
|
||||
CONFIG_KEYSTONE_IRQ=y
|
||||
CONFIG_PHY_SUN4I_USB=y
|
||||
CONFIG_PHY_SUN9I_USB=y
|
||||
CONFIG_PHY_HIX5HD2_SATA=y
|
||||
CONFIG_E1000E=y
|
||||
CONFIG_PWM_STI=y
|
||||
CONFIG_PWM_BCM2835=y
|
||||
CONFIG_PWM_BRCMSTB=m
|
||||
CONFIG_PHY_BERLIN_SATA=y
|
||||
CONFIG_PHY_BERLIN_USB=y
|
||||
CONFIG_PHY_CPCAP_USB=m
|
||||
CONFIG_PHY_QCOM_APQ8064_SATA=m
|
||||
CONFIG_PHY_RCAR_GEN2=m
|
||||
CONFIG_PHY_ROCKCHIP_DP=m
|
||||
CONFIG_PHY_ROCKCHIP_USB=y
|
||||
CONFIG_PHY_SAMSUNG_USB2=m
|
||||
CONFIG_PHY_MIPHY28LP=y
|
||||
CONFIG_PHY_STIH407_USB=y
|
||||
CONFIG_PHY_STM32_USBPHYC=y
|
||||
CONFIG_PHY_TEGRA_XUSB=y
|
||||
CONFIG_PHY_DM816X_USB=m
|
||||
CONFIG_OMAP_USB2=y
|
||||
CONFIG_TI_PIPE3=y
|
||||
CONFIG_TWL4030_USB=m
|
||||
CONFIG_PHY_BERLIN_USB=y
|
||||
CONFIG_PHY_CPCAP_USB=m
|
||||
CONFIG_PHY_BERLIN_SATA=y
|
||||
CONFIG_PHY_ROCKCHIP_DP=m
|
||||
CONFIG_PHY_ROCKCHIP_USB=y
|
||||
CONFIG_PHY_QCOM_APQ8064_SATA=m
|
||||
CONFIG_PHY_MIPHY28LP=y
|
||||
CONFIG_PHY_RCAR_GEN2=m
|
||||
CONFIG_PHY_STIH407_USB=y
|
||||
CONFIG_PHY_STM32_USBPHYC=y
|
||||
CONFIG_PHY_SUN4I_USB=y
|
||||
CONFIG_PHY_SUN9I_USB=y
|
||||
CONFIG_PHY_SAMSUNG_USB2=m
|
||||
CONFIG_PHY_TEGRA_XUSB=y
|
||||
CONFIG_PHY_BRCM_SATA=y
|
||||
CONFIG_NVMEM=y
|
||||
CONFIG_NVMEM_IMX_OCOTP=y
|
||||
CONFIG_NVMEM_SUNXI_SID=y
|
||||
CONFIG_NVMEM_VF610_OCOTP=y
|
||||
CONFIG_BCM2835_MBOX=y
|
||||
CONFIG_RASPBERRYPI_FIRMWARE=y
|
||||
CONFIG_EFI_VARS=m
|
||||
CONFIG_EFI_CAPSULE_LOADER=m
|
||||
CONFIG_BCM47XX_NVRAM=y
|
||||
CONFIG_BCM47XX_SPROM=y
|
||||
CONFIG_EFI_VARS=m
|
||||
CONFIG_EFI_CAPSULE_LOADER=m
|
||||
CONFIG_EXT4_FS=y
|
||||
CONFIG_AUTOFS4_FS=y
|
||||
CONFIG_MSDOS_FS=y
|
||||
|
@ -1004,7 +951,6 @@ CONFIG_VFAT_FS=y
|
|||
CONFIG_NTFS_FS=y
|
||||
CONFIG_TMPFS_POSIX_ACL=y
|
||||
CONFIG_UBIFS_FS=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_SQUASHFS=y
|
||||
CONFIG_SQUASHFS_LZO=y
|
||||
CONFIG_SQUASHFS_XZ=y
|
||||
|
@ -1020,13 +966,7 @@ CONFIG_NLS_CODEPAGE_437=y
|
|||
CONFIG_NLS_ISO8859_1=y
|
||||
CONFIG_NLS_UTF8=y
|
||||
CONFIG_PRINTK_TIME=y
|
||||
CONFIG_DEBUG_FS=y
|
||||
CONFIG_MAGIC_SYSRQ=y
|
||||
CONFIG_LOCKUP_DETECTOR=y
|
||||
CONFIG_CPUFREQ_DT=y
|
||||
CONFIG_KEYSTONE_IRQ=y
|
||||
CONFIG_HW_RANDOM=y
|
||||
CONFIG_HW_RANDOM_ST=y
|
||||
CONFIG_CRYPTO_USER=m
|
||||
CONFIG_CRYPTO_USER_API_HASH=m
|
||||
CONFIG_CRYPTO_USER_API_SKCIPHER=m
|
||||
|
@ -1035,27 +975,19 @@ CONFIG_CRYPTO_USER_API_AEAD=m
|
|||
CONFIG_CRYPTO_DEV_MARVELL_CESA=m
|
||||
CONFIG_CRYPTO_DEV_EXYNOS_RNG=m
|
||||
CONFIG_CRYPTO_DEV_S5P=m
|
||||
CONFIG_CRYPTO_DEV_ATMEL_AES=m
|
||||
CONFIG_CRYPTO_DEV_ATMEL_TDES=m
|
||||
CONFIG_CRYPTO_DEV_ATMEL_SHA=m
|
||||
CONFIG_CRYPTO_DEV_SUN4I_SS=m
|
||||
CONFIG_CRYPTO_DEV_ROCKCHIP=m
|
||||
CONFIG_ARM_CRYPTO=y
|
||||
CONFIG_CRYPTO_SHA1_ARM=m
|
||||
CONFIG_CRYPTO_SHA1_ARM_NEON=m
|
||||
CONFIG_CRYPTO_SHA1_ARM_CE=m
|
||||
CONFIG_CRYPTO_SHA2_ARM_CE=m
|
||||
CONFIG_CRYPTO_SHA256_ARM=m
|
||||
CONFIG_CRYPTO_SHA512_ARM=m
|
||||
CONFIG_CRYPTO_AES_ARM=m
|
||||
CONFIG_CRYPTO_AES_ARM_BS=m
|
||||
CONFIG_CRYPTO_AES_ARM_CE=m
|
||||
CONFIG_CRYPTO_CHACHA20_NEON=m
|
||||
CONFIG_CRYPTO_CRC32_ARM_CE=m
|
||||
CONFIG_CRYPTO_CRCT10DIF_ARM_CE=m
|
||||
CONFIG_CRYPTO_GHASH_ARM_CE=m
|
||||
CONFIG_CRYPTO_DEV_ATMEL_AES=m
|
||||
CONFIG_CRYPTO_DEV_ATMEL_TDES=m
|
||||
CONFIG_CRYPTO_DEV_ATMEL_SHA=m
|
||||
CONFIG_VIDEO_VIVID=m
|
||||
CONFIG_VIRTIO=y
|
||||
CONFIG_VIRTIO_PCI=y
|
||||
CONFIG_VIRTIO_PCI_LEGACY=y
|
||||
CONFIG_VIRTIO_MMIO=y
|
||||
CONFIG_CRYPTO_CRC32_ARM_CE=m
|
||||
CONFIG_CRYPTO_CHACHA20_NEON=m
|
||||
|
|
|
@ -272,9 +272,11 @@
|
|||
* Allocate stack space to store 128 bytes worth of tweaks. For
|
||||
* performance, this space is aligned to a 16-byte boundary so that we
|
||||
* can use the load/store instructions that declare 16-byte alignment.
|
||||
* For Thumb2 compatibility, don't do the 'bic' directly on 'sp'.
|
||||
*/
|
||||
sub sp, #128
|
||||
bic sp, #0xf
|
||||
sub r12, sp, #128
|
||||
bic r12, #0xf
|
||||
mov sp, r12
|
||||
|
||||
.if \n == 64
|
||||
// Load first tweak
|
||||
|
|
|
@ -1 +1,4 @@
|
|||
obj-$(CONFIG_TRUSTED_FOUNDATIONS) += trusted_foundations.o
|
||||
|
||||
# tf_generic_smc() fails to build with -fsanitize-coverage=trace-pc
|
||||
KCOV_INSTRUMENT := n
|
||||
|
|
|
@ -177,7 +177,7 @@ M_CLASS(streq r3, [r12, #PMSAv8_MAIR1])
|
|||
bic r0, r0, #CR_I
|
||||
#endif
|
||||
mcr p15, 0, r0, c1, c0, 0 @ write control reg
|
||||
isb
|
||||
instr_sync
|
||||
#elif defined (CONFIG_CPU_V7M)
|
||||
#ifdef CONFIG_ARM_MPU
|
||||
ldreq r3, [r12, MPU_CTRL]
|
||||
|
|
|
@ -20,6 +20,7 @@ config ARCH_BCM_IPROC
|
|||
select GPIOLIB
|
||||
select ARM_AMBA
|
||||
select PINCTRL
|
||||
select PCI_DOMAINS if PCI
|
||||
help
|
||||
This enables support for systems based on Broadcom IPROC architected SoCs.
|
||||
The IPROC complex contains one or more ARM CPUs along with common
|
||||
|
|
|
@ -774,7 +774,7 @@ static struct gpiod_lookup_table mmc_gpios_table = {
|
|||
GPIO_LOOKUP("davinci_gpio.0", DA850_MMCSD_CD_PIN, "cd",
|
||||
GPIO_ACTIVE_LOW),
|
||||
GPIO_LOOKUP("davinci_gpio.0", DA850_MMCSD_WP_PIN, "wp",
|
||||
GPIO_ACTIVE_LOW),
|
||||
GPIO_ACTIVE_HIGH),
|
||||
},
|
||||
};
|
||||
|
||||
|
|
|
@ -109,6 +109,45 @@ void omap5_erratum_workaround_801819(void)
|
|||
static inline void omap5_erratum_workaround_801819(void) { }
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_HARDEN_BRANCH_PREDICTOR
|
||||
/*
|
||||
* Configure ACR and enable ACTLR[0] (Enable invalidates of BTB with
|
||||
* ICIALLU) to activate the workaround for secondary Core.
|
||||
* NOTE: it is assumed that the primary core's configuration is done
|
||||
* by the boot loader (kernel will detect a misconfiguration and complain
|
||||
* if this is not done).
|
||||
*
|
||||
* In General Purpose(GP) devices, ACR bit settings can only be done
|
||||
* by ROM code in "secure world" using the smc call and there is no
|
||||
* option to update the "firmware" on such devices. This also works for
|
||||
* High security(HS) devices, as a backup option in case the
|
||||
* "update" is not done in the "security firmware".
|
||||
*/
|
||||
static void omap5_secondary_harden_predictor(void)
|
||||
{
|
||||
u32 acr, acr_mask;
|
||||
|
||||
asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr));
|
||||
|
||||
/*
|
||||
* ACTLR[0] (Enable invalidates of BTB with ICIALLU)
|
||||
*/
|
||||
acr_mask = BIT(0);
|
||||
|
||||
/* Do we already have it done.. if yes, skip expensive smc */
|
||||
if ((acr & acr_mask) == acr_mask)
|
||||
return;
|
||||
|
||||
acr |= acr_mask;
|
||||
omap_smc1(OMAP5_DRA7_MON_SET_ACR_INDEX, acr);
|
||||
|
||||
pr_debug("%s: ARM ACR setup for CVE_2017_5715 applied on CPU%d\n",
|
||||
__func__, smp_processor_id());
|
||||
}
|
||||
#else
|
||||
static inline void omap5_secondary_harden_predictor(void) { }
|
||||
#endif
|
||||
|
||||
static void omap4_secondary_init(unsigned int cpu)
|
||||
{
|
||||
/*
|
||||
|
@ -131,6 +170,8 @@ static void omap4_secondary_init(unsigned int cpu)
|
|||
set_cntfreq();
|
||||
/* Configure ACR to disable streaming WA for 801819 */
|
||||
omap5_erratum_workaround_801819();
|
||||
/* Enable ACR to allow for ICUALLU workaround */
|
||||
omap5_secondary_harden_predictor();
|
||||
}
|
||||
|
||||
/*
|
||||
|
|
|
@ -185,7 +185,7 @@ static int pxa_irq_suspend(void)
|
|||
{
|
||||
int i;
|
||||
|
||||
for (i = 0; i < pxa_internal_irq_nr / 32; i++) {
|
||||
for (i = 0; i < DIV_ROUND_UP(pxa_internal_irq_nr, 32); i++) {
|
||||
void __iomem *base = irq_base(i);
|
||||
|
||||
saved_icmr[i] = __raw_readl(base + ICMR);
|
||||
|
@ -204,7 +204,7 @@ static void pxa_irq_resume(void)
|
|||
{
|
||||
int i;
|
||||
|
||||
for (i = 0; i < pxa_internal_irq_nr / 32; i++) {
|
||||
for (i = 0; i < DIV_ROUND_UP(pxa_internal_irq_nr, 32); i++) {
|
||||
void __iomem *base = irq_base(i);
|
||||
|
||||
__raw_writel(saved_icmr[i], base + ICMR);
|
||||
|
|
|
@ -10,6 +10,7 @@ menuconfig ARCH_SOCFPGA
|
|||
select HAVE_ARM_SCU
|
||||
select HAVE_ARM_TWD if SMP
|
||||
select MFD_SYSCON
|
||||
select PCI_DOMAINS if PCI
|
||||
|
||||
if ARCH_SOCFPGA
|
||||
config SOCFPGA_SUSPEND
|
||||
|
|
|
@ -736,20 +736,29 @@ static int __mark_rodata_ro(void *unused)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static int kernel_set_to_readonly __read_mostly;
|
||||
|
||||
void mark_rodata_ro(void)
|
||||
{
|
||||
kernel_set_to_readonly = 1;
|
||||
stop_machine(__mark_rodata_ro, NULL, NULL);
|
||||
debug_checkwx();
|
||||
}
|
||||
|
||||
void set_kernel_text_rw(void)
|
||||
{
|
||||
if (!kernel_set_to_readonly)
|
||||
return;
|
||||
|
||||
set_section_perms(ro_perms, ARRAY_SIZE(ro_perms), false,
|
||||
current->active_mm);
|
||||
}
|
||||
|
||||
void set_kernel_text_ro(void)
|
||||
{
|
||||
if (!kernel_set_to_readonly)
|
||||
return;
|
||||
|
||||
set_section_perms(ro_perms, ARRAY_SIZE(ro_perms), true,
|
||||
current->active_mm);
|
||||
}
|
||||
|
|
|
@ -1844,7 +1844,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
|
|||
/* there are 2 passes here */
|
||||
bpf_jit_dump(prog->len, image_size, 2, ctx.target);
|
||||
|
||||
set_memory_ro((unsigned long)header, header->pages);
|
||||
bpf_jit_binary_lock_ro(header);
|
||||
prog->bpf_func = (void *)ctx.target;
|
||||
prog->jited = 1;
|
||||
prog->jited_len = image_size;
|
||||
|
|
|
@ -10,7 +10,7 @@
|
|||
#
|
||||
# Copyright (C) 1995-2001 by Russell King
|
||||
|
||||
LDFLAGS_vmlinux :=-p --no-undefined -X
|
||||
LDFLAGS_vmlinux :=--no-undefined -X
|
||||
CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET)
|
||||
GZFLAGS :=-9
|
||||
|
||||
|
@ -60,15 +60,15 @@ ifeq ($(CONFIG_CPU_BIG_ENDIAN), y)
|
|||
KBUILD_CPPFLAGS += -mbig-endian
|
||||
CHECKFLAGS += -D__AARCH64EB__
|
||||
AS += -EB
|
||||
LD += -EB
|
||||
LDFLAGS += -maarch64linuxb
|
||||
# We must use the linux target here, since distributions don't tend to package
|
||||
# the ELF linker scripts with binutils, and this results in a build failure.
|
||||
LDFLAGS += -EB -maarch64linuxb
|
||||
UTS_MACHINE := aarch64_be
|
||||
else
|
||||
KBUILD_CPPFLAGS += -mlittle-endian
|
||||
CHECKFLAGS += -D__AARCH64EL__
|
||||
AS += -EL
|
||||
LD += -EL
|
||||
LDFLAGS += -maarch64linux
|
||||
LDFLAGS += -EL -maarch64linux # See comment above
|
||||
UTS_MACHINE := aarch64
|
||||
endif
|
||||
|
||||
|
|
|
@ -309,8 +309,7 @@
|
|||
interrupts = <0 99 4>;
|
||||
resets = <&rst SPIM0_RESET>;
|
||||
reg-io-width = <4>;
|
||||
num-chipselect = <4>;
|
||||
bus-num = <0>;
|
||||
num-cs = <4>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
@ -322,8 +321,7 @@
|
|||
interrupts = <0 100 4>;
|
||||
resets = <&rst SPIM1_RESET>;
|
||||
reg-io-width = <4>;
|
||||
num-chipselect = <4>;
|
||||
bus-num = <0>;
|
||||
num-cs = <4>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
|
|
@ -66,9 +66,22 @@
|
|||
|
||||
ðmac {
|
||||
status = "okay";
|
||||
phy-mode = "rgmii";
|
||||
pinctrl-0 = <ð_rgmii_y_pins>;
|
||||
pinctrl-names = "default";
|
||||
phy-handle = <ð_phy0>;
|
||||
phy-mode = "rgmii";
|
||||
|
||||
mdio {
|
||||
compatible = "snps,dwmac-mdio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
eth_phy0: ethernet-phy@0 {
|
||||
/* Realtek RTL8211F (0x001cc916) */
|
||||
reg = <0>;
|
||||
eee-broken-1000t;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart_A {
|
||||
|
|
|
@ -132,7 +132,7 @@
|
|||
|
||||
sd_emmc_b: sd@5000 {
|
||||
compatible = "amlogic,meson-axg-mmc";
|
||||
reg = <0x0 0x5000 0x0 0x2000>;
|
||||
reg = <0x0 0x5000 0x0 0x800>;
|
||||
interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
|
||||
status = "disabled";
|
||||
clocks = <&clkc CLKID_SD_EMMC_B>,
|
||||
|
@ -144,7 +144,7 @@
|
|||
|
||||
sd_emmc_c: mmc@7000 {
|
||||
compatible = "amlogic,meson-axg-mmc";
|
||||
reg = <0x0 0x7000 0x0 0x2000>;
|
||||
reg = <0x0 0x7000 0x0 0x800>;
|
||||
interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
|
||||
status = "disabled";
|
||||
clocks = <&clkc CLKID_SD_EMMC_C>,
|
||||
|
|
|
@ -35,6 +35,12 @@
|
|||
no-map;
|
||||
};
|
||||
|
||||
/* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */
|
||||
secmon_reserved_alt: secmon@5000000 {
|
||||
reg = <0x0 0x05000000 0x0 0x300000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
linux,cma {
|
||||
compatible = "shared-dma-pool";
|
||||
reusable;
|
||||
|
@ -457,21 +463,21 @@
|
|||
|
||||
sd_emmc_a: mmc@70000 {
|
||||
compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
|
||||
reg = <0x0 0x70000 0x0 0x2000>;
|
||||
reg = <0x0 0x70000 0x0 0x800>;
|
||||
interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sd_emmc_b: mmc@72000 {
|
||||
compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
|
||||
reg = <0x0 0x72000 0x0 0x2000>;
|
||||
reg = <0x0 0x72000 0x0 0x800>;
|
||||
interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sd_emmc_c: mmc@74000 {
|
||||
compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
|
||||
reg = <0x0 0x74000 0x0 0x2000>;
|
||||
reg = <0x0 0x74000 0x0 0x800>;
|
||||
interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
@ -6,7 +6,7 @@
|
|||
|
||||
&apb {
|
||||
mali: gpu@c0000 {
|
||||
compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
|
||||
compatible = "amlogic,meson-gxl-mali", "arm,mali-450";
|
||||
reg = <0x0 0xc0000 0x0 0x40000>;
|
||||
interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
|
||||
|
|
|
@ -234,9 +234,6 @@
|
|||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
sd-uhs-sdr12;
|
||||
sd-uhs-sdr25;
|
||||
sd-uhs-sdr50;
|
||||
max-frequency = <100000000>;
|
||||
disable-wp;
|
||||
|
||||
|
|
|
@ -189,3 +189,10 @@
|
|||
&usb0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2_phy0 {
|
||||
/*
|
||||
* HDMI_5V is also used as supply for the USB VBUS.
|
||||
*/
|
||||
phy-supply = <&hdmi_5v>;
|
||||
};
|
||||
|
|
|
@ -13,14 +13,6 @@
|
|||
/ {
|
||||
compatible = "amlogic,meson-gxl";
|
||||
|
||||
reserved-memory {
|
||||
/* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */
|
||||
secmon_reserved_alt: secmon@5000000 {
|
||||
reg = <0x0 0x05000000 0x0 0x300000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
soc {
|
||||
usb0: usb@c9000000 {
|
||||
status = "disabled";
|
||||
|
|
|
@ -118,7 +118,7 @@
|
|||
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 281 IRQ_TYPE_NONE>;
|
||||
interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
linux,pci-domain = <0>;
|
||||
|
||||
|
@ -149,7 +149,7 @@
|
|||
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 305 IRQ_TYPE_NONE>;
|
||||
interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
linux,pci-domain = <4>;
|
||||
|
||||
|
@ -566,7 +566,7 @@
|
|||
reg = <0x66080000 0x100>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 394 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <100000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
@ -594,7 +594,7 @@
|
|||
reg = <0x660b0000 0x100>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 395 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <100000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
@ -43,6 +43,10 @@
|
|||
enet-phy-lane-swap;
|
||||
};
|
||||
|
||||
&sdio0 {
|
||||
mmc-ddr-1_8v;
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
@ -42,3 +42,7 @@
|
|||
&gphy0 {
|
||||
enet-phy-lane-swap;
|
||||
};
|
||||
|
||||
&sdio0 {
|
||||
mmc-ddr-1_8v;
|
||||
};
|
||||
|
|
|
@ -409,7 +409,7 @@
|
|||
reg = <0x000b0000 0x100>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 177 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <100000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
@ -453,7 +453,7 @@
|
|||
reg = <0x000e0000 0x100>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 178 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <100000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
@ -585,6 +585,8 @@
|
|||
vmmc-supply = <&wlan_en>;
|
||||
ti,non-removable;
|
||||
non-removable;
|
||||
cap-power-off-card;
|
||||
keep-power-in-suspend;
|
||||
#address-cells = <0x1>;
|
||||
#size-cells = <0x0>;
|
||||
status = "ok";
|
||||
|
|
|
@ -322,6 +322,8 @@
|
|||
dwmmc_2: dwmmc2@f723f000 {
|
||||
bus-width = <0x4>;
|
||||
non-removable;
|
||||
cap-power-off-card;
|
||||
keep-power-in-suspend;
|
||||
vmmc-supply = <®_vdd_3v3>;
|
||||
mmc-pwrseq = <&wl1835_pwrseq>;
|
||||
|
||||
|
|
|
@ -149,7 +149,7 @@
|
|||
|
||||
CP110_LABEL(icu): interrupt-controller@1e0000 {
|
||||
compatible = "marvell,cp110-icu";
|
||||
reg = <0x1e0000 0x10>;
|
||||
reg = <0x1e0000 0x440>;
|
||||
#interrupt-cells = <3>;
|
||||
interrupt-controller;
|
||||
msi-parent = <&gicp>;
|
||||
|
|
|
@ -75,7 +75,7 @@
|
|||
|
||||
serial@75b1000 {
|
||||
label = "LS-UART0";
|
||||
status = "okay";
|
||||
status = "disabled";
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&blsp2_uart2_4pins_default>;
|
||||
pinctrl-1 = <&blsp2_uart2_4pins_sleep>;
|
||||
|
|
|
@ -1191,14 +1191,14 @@
|
|||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
etf_out: endpoint {
|
||||
etf_in: endpoint {
|
||||
slave-mode;
|
||||
remote-endpoint = <&funnel0_out>;
|
||||
};
|
||||
};
|
||||
port@1 {
|
||||
reg = <0>;
|
||||
etf_in: endpoint {
|
||||
etf_out: endpoint {
|
||||
remote-endpoint = <&replicator_in>;
|
||||
};
|
||||
};
|
||||
|
|
|
@ -54,7 +54,7 @@
|
|||
sound {
|
||||
compatible = "audio-graph-card";
|
||||
label = "UniPhier LD11";
|
||||
widgets = "Headphone", "Headphone Jack";
|
||||
widgets = "Headphone", "Headphones";
|
||||
dais = <&i2s_port2
|
||||
&i2s_port3
|
||||
&i2s_port4
|
||||
|
|
|
@ -54,7 +54,7 @@
|
|||
sound {
|
||||
compatible = "audio-graph-card";
|
||||
label = "UniPhier LD20";
|
||||
widgets = "Headphone", "Headphone Jack";
|
||||
widgets = "Headphone", "Headphones";
|
||||
dais = <&i2s_port2
|
||||
&i2s_port3
|
||||
&i2s_port4
|
||||
|
|
|
@ -47,6 +47,7 @@ CONFIG_ARCH_MVEBU=y
|
|||
CONFIG_ARCH_QCOM=y
|
||||
CONFIG_ARCH_ROCKCHIP=y
|
||||
CONFIG_ARCH_SEATTLE=y
|
||||
CONFIG_ARCH_SYNQUACER=y
|
||||
CONFIG_ARCH_RENESAS=y
|
||||
CONFIG_ARCH_R8A7795=y
|
||||
CONFIG_ARCH_R8A7796=y
|
||||
|
@ -58,7 +59,6 @@ CONFIG_ARCH_R8A77995=y
|
|||
CONFIG_ARCH_STRATIX10=y
|
||||
CONFIG_ARCH_TEGRA=y
|
||||
CONFIG_ARCH_SPRD=y
|
||||
CONFIG_ARCH_SYNQUACER=y
|
||||
CONFIG_ARCH_THUNDER=y
|
||||
CONFIG_ARCH_THUNDER2=y
|
||||
CONFIG_ARCH_UNIPHIER=y
|
||||
|
@ -67,25 +67,23 @@ CONFIG_ARCH_XGENE=y
|
|||
CONFIG_ARCH_ZX=y
|
||||
CONFIG_ARCH_ZYNQMP=y
|
||||
CONFIG_PCI=y
|
||||
CONFIG_HOTPLUG_PCI_PCIE=y
|
||||
CONFIG_PCI_IOV=y
|
||||
CONFIG_HOTPLUG_PCI=y
|
||||
CONFIG_HOTPLUG_PCI_ACPI=y
|
||||
CONFIG_PCI_LAYERSCAPE=y
|
||||
CONFIG_PCI_HISI=y
|
||||
CONFIG_PCIE_QCOM=y
|
||||
CONFIG_PCIE_KIRIN=y
|
||||
CONFIG_PCIE_ARMADA_8K=y
|
||||
CONFIG_PCIE_HISI_STB=y
|
||||
CONFIG_PCI_AARDVARK=y
|
||||
CONFIG_PCI_TEGRA=y
|
||||
CONFIG_PCIE_RCAR=y
|
||||
CONFIG_PCIE_ROCKCHIP=y
|
||||
CONFIG_PCIE_ROCKCHIP_HOST=m
|
||||
CONFIG_PCI_HOST_GENERIC=y
|
||||
CONFIG_PCI_XGENE=y
|
||||
CONFIG_PCI_HOST_THUNDER_PEM=y
|
||||
CONFIG_PCI_HOST_THUNDER_ECAM=y
|
||||
CONFIG_PCIE_ROCKCHIP_HOST=m
|
||||
CONFIG_PCI_LAYERSCAPE=y
|
||||
CONFIG_PCI_HISI=y
|
||||
CONFIG_PCIE_QCOM=y
|
||||
CONFIG_PCIE_ARMADA_8K=y
|
||||
CONFIG_PCIE_KIRIN=y
|
||||
CONFIG_PCIE_HISI_STB=y
|
||||
CONFIG_ARM64_VA_BITS_48=y
|
||||
CONFIG_SCHED_MC=y
|
||||
CONFIG_NUMA=y
|
||||
|
@ -104,8 +102,6 @@ CONFIG_HIBERNATION=y
|
|||
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
|
||||
CONFIG_ARM_CPUIDLE=y
|
||||
CONFIG_CPU_FREQ=y
|
||||
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
|
||||
CONFIG_CPU_FREQ_GOV_COMMON=y
|
||||
CONFIG_CPU_FREQ_STAT=y
|
||||
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
|
||||
CONFIG_CPU_FREQ_GOV_USERSPACE=y
|
||||
|
@ -113,11 +109,11 @@ CONFIG_CPU_FREQ_GOV_ONDEMAND=y
|
|||
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
|
||||
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
|
||||
CONFIG_CPUFREQ_DT=y
|
||||
CONFIG_ACPI_CPPC_CPUFREQ=m
|
||||
CONFIG_ARM_ARMADA_37XX_CPUFREQ=y
|
||||
CONFIG_ARM_BIG_LITTLE_CPUFREQ=y
|
||||
CONFIG_ARM_SCPI_CPUFREQ=y
|
||||
CONFIG_ARM_TEGRA186_CPUFREQ=y
|
||||
CONFIG_ACPI_CPPC_CPUFREQ=m
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
|
@ -236,11 +232,6 @@ CONFIG_SMSC911X=y
|
|||
CONFIG_SNI_AVE=y
|
||||
CONFIG_SNI_NETSEC=y
|
||||
CONFIG_STMMAC_ETH=m
|
||||
CONFIG_DWMAC_IPQ806X=m
|
||||
CONFIG_DWMAC_MESON=m
|
||||
CONFIG_DWMAC_ROCKCHIP=m
|
||||
CONFIG_DWMAC_SUNXI=m
|
||||
CONFIG_DWMAC_SUN8I=m
|
||||
CONFIG_MDIO_BUS_MUX_MMIOREG=y
|
||||
CONFIG_AT803X_PHY=m
|
||||
CONFIG_MARVELL_PHY=m
|
||||
|
@ -269,8 +260,8 @@ CONFIG_WL18XX=m
|
|||
CONFIG_WLCORE_SDIO=m
|
||||
CONFIG_INPUT_EVDEV=y
|
||||
CONFIG_KEYBOARD_ADC=m
|
||||
CONFIG_KEYBOARD_CROS_EC=y
|
||||
CONFIG_KEYBOARD_GPIO=y
|
||||
CONFIG_KEYBOARD_CROS_EC=y
|
||||
CONFIG_INPUT_TOUCHSCREEN=y
|
||||
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
|
||||
CONFIG_INPUT_MISC=y
|
||||
|
@ -296,17 +287,13 @@ CONFIG_SERIAL_SAMSUNG=y
|
|||
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
|
||||
CONFIG_SERIAL_TEGRA=y
|
||||
CONFIG_SERIAL_SH_SCI=y
|
||||
CONFIG_SERIAL_SH_SCI_NR_UARTS=11
|
||||
CONFIG_SERIAL_SH_SCI_CONSOLE=y
|
||||
CONFIG_SERIAL_MSM=y
|
||||
CONFIG_SERIAL_MSM_CONSOLE=y
|
||||
CONFIG_SERIAL_XILINX_PS_UART=y
|
||||
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
|
||||
CONFIG_SERIAL_MVEBU_UART=y
|
||||
CONFIG_SERIAL_DEV_BUS=y
|
||||
CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
|
||||
CONFIG_VIRTIO_CONSOLE=y
|
||||
CONFIG_I2C_HID=m
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_MUX=y
|
||||
CONFIG_I2C_MUX_PCA954x=y
|
||||
|
@ -325,26 +312,26 @@ CONFIG_I2C_RCAR=y
|
|||
CONFIG_I2C_CROS_EC_TUNNEL=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_ARMADA_3700=y
|
||||
CONFIG_SPI_MESON_SPICC=m
|
||||
CONFIG_SPI_MESON_SPIFC=m
|
||||
CONFIG_SPI_BCM2835=m
|
||||
CONFIG_SPI_BCM2835AUX=m
|
||||
CONFIG_SPI_MESON_SPICC=m
|
||||
CONFIG_SPI_MESON_SPIFC=m
|
||||
CONFIG_SPI_ORION=y
|
||||
CONFIG_SPI_PL022=y
|
||||
CONFIG_SPI_QUP=y
|
||||
CONFIG_SPI_ROCKCHIP=y
|
||||
CONFIG_SPI_QUP=y
|
||||
CONFIG_SPI_S3C64XX=y
|
||||
CONFIG_SPI_SPIDEV=m
|
||||
CONFIG_SPMI=y
|
||||
CONFIG_PINCTRL_IPQ8074=y
|
||||
CONFIG_PINCTRL_SINGLE=y
|
||||
CONFIG_PINCTRL_MAX77620=y
|
||||
CONFIG_PINCTRL_IPQ8074=y
|
||||
CONFIG_PINCTRL_MSM8916=y
|
||||
CONFIG_PINCTRL_MSM8994=y
|
||||
CONFIG_PINCTRL_MSM8996=y
|
||||
CONFIG_PINCTRL_MT7622=y
|
||||
CONFIG_PINCTRL_QDF2XXX=y
|
||||
CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
|
||||
CONFIG_PINCTRL_MT7622=y
|
||||
CONFIG_GPIO_DWAPB=y
|
||||
CONFIG_GPIO_MB86S7X=y
|
||||
CONFIG_GPIO_PL061=y
|
||||
|
@ -368,13 +355,13 @@ CONFIG_SENSORS_INA2XX=m
|
|||
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
|
||||
CONFIG_CPU_THERMAL=y
|
||||
CONFIG_THERMAL_EMULATION=y
|
||||
CONFIG_ROCKCHIP_THERMAL=m
|
||||
CONFIG_RCAR_GEN3_THERMAL=y
|
||||
CONFIG_ARMADA_THERMAL=y
|
||||
CONFIG_BRCMSTB_THERMAL=m
|
||||
CONFIG_EXYNOS_THERMAL=y
|
||||
CONFIG_RCAR_GEN3_THERMAL=y
|
||||
CONFIG_QCOM_TSENS=y
|
||||
CONFIG_ROCKCHIP_THERMAL=m
|
||||
CONFIG_TEGRA_BPMP_THERMAL=m
|
||||
CONFIG_QCOM_TSENS=y
|
||||
CONFIG_UNIPHIER_THERMAL=y
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_S3C2410_WATCHDOG=y
|
||||
|
@ -395,9 +382,9 @@ CONFIG_MFD_MAX77620=y
|
|||
CONFIG_MFD_SPMI_PMIC=y
|
||||
CONFIG_MFD_RK808=y
|
||||
CONFIG_MFD_SEC_CORE=y
|
||||
CONFIG_REGULATOR_FIXED_VOLTAGE=y
|
||||
CONFIG_REGULATOR_AXP20X=y
|
||||
CONFIG_REGULATOR_FAN53555=y
|
||||
CONFIG_REGULATOR_FIXED_VOLTAGE=y
|
||||
CONFIG_REGULATOR_GPIO=y
|
||||
CONFIG_REGULATOR_HI6421V530=y
|
||||
CONFIG_REGULATOR_HI655X=y
|
||||
|
@ -407,16 +394,15 @@ CONFIG_REGULATOR_QCOM_SMD_RPM=y
|
|||
CONFIG_REGULATOR_QCOM_SPMI=y
|
||||
CONFIG_REGULATOR_RK808=y
|
||||
CONFIG_REGULATOR_S2MPS11=y
|
||||
CONFIG_RC_CORE=m
|
||||
CONFIG_RC_DECODERS=y
|
||||
CONFIG_RC_DEVICES=y
|
||||
CONFIG_IR_MESON=m
|
||||
CONFIG_MEDIA_SUPPORT=m
|
||||
CONFIG_MEDIA_CAMERA_SUPPORT=y
|
||||
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
|
||||
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
|
||||
CONFIG_MEDIA_CONTROLLER=y
|
||||
CONFIG_MEDIA_RC_SUPPORT=y
|
||||
CONFIG_RC_CORE=m
|
||||
CONFIG_RC_DEVICES=y
|
||||
CONFIG_RC_DECODERS=y
|
||||
CONFIG_IR_MESON=m
|
||||
CONFIG_VIDEO_V4L2_SUBDEV_API=y
|
||||
# CONFIG_DVB_NET is not set
|
||||
CONFIG_V4L_MEM2MEM_DRIVERS=y
|
||||
|
@ -441,8 +427,7 @@ CONFIG_ROCKCHIP_DW_HDMI=y
|
|||
CONFIG_ROCKCHIP_DW_MIPI_DSI=y
|
||||
CONFIG_ROCKCHIP_INNO_HDMI=y
|
||||
CONFIG_DRM_RCAR_DU=m
|
||||
CONFIG_DRM_RCAR_LVDS=y
|
||||
CONFIG_DRM_RCAR_VSP=y
|
||||
CONFIG_DRM_RCAR_LVDS=m
|
||||
CONFIG_DRM_TEGRA=m
|
||||
CONFIG_DRM_PANEL_SIMPLE=m
|
||||
CONFIG_DRM_I2C_ADV7511=m
|
||||
|
@ -455,7 +440,6 @@ CONFIG_FB_ARMCLCD=y
|
|||
CONFIG_BACKLIGHT_GENERIC=m
|
||||
CONFIG_BACKLIGHT_PWM=m
|
||||
CONFIG_BACKLIGHT_LP855X=m
|
||||
CONFIG_FRAMEBUFFER_CONSOLE=y
|
||||
CONFIG_LOGO=y
|
||||
# CONFIG_LOGO_LINUX_MONO is not set
|
||||
# CONFIG_LOGO_LINUX_VGA16 is not set
|
||||
|
@ -468,6 +452,7 @@ CONFIG_SND_SOC_RCAR=m
|
|||
CONFIG_SND_SOC_AK4613=m
|
||||
CONFIG_SND_SIMPLE_CARD=m
|
||||
CONFIG_SND_AUDIO_GRAPH_CARD=m
|
||||
CONFIG_I2C_HID=m
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_OTG=y
|
||||
CONFIG_USB_XHCI_HCD=y
|
||||
|
@ -501,12 +486,12 @@ CONFIG_MMC_BLOCK_MINORS=32
|
|||
CONFIG_MMC_ARMMMCI=y
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_ACPI=y
|
||||
CONFIG_MMC_SDHCI_F_SDH30=y
|
||||
CONFIG_MMC_SDHCI_PLTFM=y
|
||||
CONFIG_MMC_SDHCI_OF_ARASAN=y
|
||||
CONFIG_MMC_SDHCI_OF_ESDHC=y
|
||||
CONFIG_MMC_SDHCI_CADENCE=y
|
||||
CONFIG_MMC_SDHCI_TEGRA=y
|
||||
CONFIG_MMC_SDHCI_F_SDH30=y
|
||||
CONFIG_MMC_MESON_GX=y
|
||||
CONFIG_MMC_SDHCI_MSM=y
|
||||
CONFIG_MMC_SPI=y
|
||||
|
@ -524,11 +509,11 @@ CONFIG_LEDS_CLASS=y
|
|||
CONFIG_LEDS_GPIO=y
|
||||
CONFIG_LEDS_PWM=y
|
||||
CONFIG_LEDS_SYSCON=y
|
||||
CONFIG_LEDS_TRIGGER_DISK=y
|
||||
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
|
||||
CONFIG_LEDS_TRIGGER_CPU=y
|
||||
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
|
||||
CONFIG_LEDS_TRIGGER_PANIC=y
|
||||
CONFIG_LEDS_TRIGGER_DISK=y
|
||||
CONFIG_EDAC=y
|
||||
CONFIG_EDAC_GHES=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
|
@ -537,13 +522,13 @@ CONFIG_RTC_DRV_RK808=m
|
|||
CONFIG_RTC_DRV_S5M=y
|
||||
CONFIG_RTC_DRV_DS3232=y
|
||||
CONFIG_RTC_DRV_EFI=y
|
||||
CONFIG_RTC_DRV_CROS_EC=y
|
||||
CONFIG_RTC_DRV_S3C=y
|
||||
CONFIG_RTC_DRV_PL031=y
|
||||
CONFIG_RTC_DRV_SUN6I=y
|
||||
CONFIG_RTC_DRV_ARMADA38X=y
|
||||
CONFIG_RTC_DRV_TEGRA=y
|
||||
CONFIG_RTC_DRV_XGENE=y
|
||||
CONFIG_RTC_DRV_CROS_EC=y
|
||||
CONFIG_DMADEVICES=y
|
||||
CONFIG_DMA_BCM2835=m
|
||||
CONFIG_K3_DMA=y
|
||||
|
@ -579,7 +564,6 @@ CONFIG_HWSPINLOCK_QCOM=y
|
|||
CONFIG_ARM_MHU=y
|
||||
CONFIG_PLATFORM_MHU=y
|
||||
CONFIG_BCM2835_MBOX=y
|
||||
CONFIG_HI6220_MBOX=y
|
||||
CONFIG_QCOM_APCS_IPC=y
|
||||
CONFIG_ROCKCHIP_IOMMU=y
|
||||
CONFIG_TEGRA_IOMMU_SMMU=y
|
||||
|
@ -602,7 +586,6 @@ CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
|
|||
CONFIG_EXTCON_USB_GPIO=y
|
||||
CONFIG_EXTCON_USBC_CROS_EC=y
|
||||
CONFIG_MEMORY=y
|
||||
CONFIG_TEGRA_MC=y
|
||||
CONFIG_IIO=y
|
||||
CONFIG_EXYNOS_ADC=y
|
||||
CONFIG_ROCKCHIP_SARADC=m
|
||||
|
@ -618,27 +601,27 @@ CONFIG_PWM_RCAR=m
|
|||
CONFIG_PWM_ROCKCHIP=y
|
||||
CONFIG_PWM_SAMSUNG=y
|
||||
CONFIG_PWM_TEGRA=m
|
||||
CONFIG_PHY_XGENE=y
|
||||
CONFIG_PHY_SUN4I_USB=y
|
||||
CONFIG_PHY_HI6220_USB=y
|
||||
CONFIG_PHY_HISTB_COMBPHY=y
|
||||
CONFIG_PHY_HISI_INNO_USB2=y
|
||||
CONFIG_PHY_RCAR_GEN3_USB2=y
|
||||
CONFIG_PHY_RCAR_GEN3_USB3=m
|
||||
CONFIG_PHY_HI6220_USB=y
|
||||
CONFIG_PHY_QCOM_USB_HS=y
|
||||
CONFIG_PHY_SUN4I_USB=y
|
||||
CONFIG_PHY_MVEBU_CP110_COMPHY=y
|
||||
CONFIG_PHY_QCOM_QMP=m
|
||||
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
|
||||
CONFIG_PHY_QCOM_USB_HS=y
|
||||
CONFIG_PHY_RCAR_GEN3_USB2=y
|
||||
CONFIG_PHY_RCAR_GEN3_USB3=m
|
||||
CONFIG_PHY_ROCKCHIP_EMMC=y
|
||||
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
|
||||
CONFIG_PHY_ROCKCHIP_PCIE=m
|
||||
CONFIG_PHY_ROCKCHIP_TYPEC=y
|
||||
CONFIG_PHY_XGENE=y
|
||||
CONFIG_PHY_TEGRA_XUSB=y
|
||||
CONFIG_QCOM_L2_PMU=y
|
||||
CONFIG_QCOM_L3_PMU=y
|
||||
CONFIG_MESON_EFUSE=m
|
||||
CONFIG_QCOM_QFPROM=y
|
||||
CONFIG_ROCKCHIP_EFUSE=y
|
||||
CONFIG_UNIPHIER_EFUSE=y
|
||||
CONFIG_MESON_EFUSE=m
|
||||
CONFIG_TEE=y
|
||||
CONFIG_OPTEE=y
|
||||
CONFIG_ARM_SCPI_PROTOCOL=y
|
||||
|
@ -647,7 +630,6 @@ CONFIG_EFI_CAPSULE_LOADER=y
|
|||
CONFIG_ACPI=y
|
||||
CONFIG_ACPI_APEI=y
|
||||
CONFIG_ACPI_APEI_GHES=y
|
||||
CONFIG_ACPI_APEI_PCIEAER=y
|
||||
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
|
||||
CONFIG_ACPI_APEI_EINJ=y
|
||||
CONFIG_EXT2_FS=y
|
||||
|
@ -682,7 +664,6 @@ CONFIG_DEBUG_INFO=y
|
|||
CONFIG_DEBUG_FS=y
|
||||
CONFIG_MAGIC_SYSRQ=y
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
CONFIG_LOCKUP_DETECTOR=y
|
||||
# CONFIG_SCHED_DEBUG is not set
|
||||
# CONFIG_DEBUG_PREEMPT is not set
|
||||
# CONFIG_FTRACE is not set
|
||||
|
@ -691,20 +672,15 @@ CONFIG_SECURITY=y
|
|||
CONFIG_CRYPTO_ECHAINIV=y
|
||||
CONFIG_CRYPTO_ANSI_CPRNG=y
|
||||
CONFIG_ARM64_CRYPTO=y
|
||||
CONFIG_CRYPTO_SHA256_ARM64=m
|
||||
CONFIG_CRYPTO_SHA512_ARM64=m
|
||||
CONFIG_CRYPTO_SHA1_ARM64_CE=y
|
||||
CONFIG_CRYPTO_SHA2_ARM64_CE=y
|
||||
CONFIG_CRYPTO_GHASH_ARM64_CE=y
|
||||
CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=m
|
||||
CONFIG_CRYPTO_CRC32_ARM64_CE=m
|
||||
CONFIG_CRYPTO_AES_ARM64=m
|
||||
CONFIG_CRYPTO_AES_ARM64_CE=m
|
||||
CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
|
||||
CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
|
||||
CONFIG_CRYPTO_AES_ARM64_NEON_BLK=m
|
||||
CONFIG_CRYPTO_CHACHA20_NEON=m
|
||||
CONFIG_CRYPTO_AES_ARM64_BS=m
|
||||
CONFIG_CRYPTO_SHA512_ARM64_CE=m
|
||||
CONFIG_CRYPTO_SHA3_ARM64=m
|
||||
CONFIG_CRYPTO_SM3_ARM64_CE=m
|
||||
CONFIG_CRYPTO_GHASH_ARM64_CE=y
|
||||
CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=m
|
||||
CONFIG_CRYPTO_CRC32_ARM64_CE=m
|
||||
CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
|
||||
CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
|
||||
CONFIG_CRYPTO_CHACHA20_NEON=m
|
||||
CONFIG_CRYPTO_AES_ARM64_BS=m
|
||||
|
|
|
@ -28,7 +28,12 @@ typedef void (*alternative_cb_t)(struct alt_instr *alt,
|
|||
__le32 *origptr, __le32 *updptr, int nr_inst);
|
||||
|
||||
void __init apply_alternatives_all(void);
|
||||
void apply_alternatives(void *start, size_t length);
|
||||
|
||||
#ifdef CONFIG_MODULES
|
||||
void apply_alternatives_module(void *start, size_t length);
|
||||
#else
|
||||
static inline void apply_alternatives_module(void *start, size_t length) { }
|
||||
#endif
|
||||
|
||||
#define ALTINSTR_ENTRY(feature,cb) \
|
||||
" .word 661b - .\n" /* label */ \
|
||||
|
|
|
@ -224,10 +224,8 @@ static inline void set_pte(pte_t *ptep, pte_t pte)
|
|||
* Only if the new pte is valid and kernel, otherwise TLB maintenance
|
||||
* or update_mmu_cache() have the necessary barriers.
|
||||
*/
|
||||
if (pte_valid_not_user(pte)) {
|
||||
if (pte_valid_not_user(pte))
|
||||
dsb(ishst);
|
||||
isb();
|
||||
}
|
||||
}
|
||||
|
||||
extern void __sync_icache_dcache(pte_t pteval);
|
||||
|
@ -434,7 +432,6 @@ static inline void set_pmd(pmd_t *pmdp, pmd_t pmd)
|
|||
{
|
||||
WRITE_ONCE(*pmdp, pmd);
|
||||
dsb(ishst);
|
||||
isb();
|
||||
}
|
||||
|
||||
static inline void pmd_clear(pmd_t *pmdp)
|
||||
|
@ -485,7 +482,6 @@ static inline void set_pud(pud_t *pudp, pud_t pud)
|
|||
{
|
||||
WRITE_ONCE(*pudp, pud);
|
||||
dsb(ishst);
|
||||
isb();
|
||||
}
|
||||
|
||||
static inline void pud_clear(pud_t *pudp)
|
||||
|
|
|
@ -29,20 +29,15 @@ DECLARE_PER_CPU(bool, kernel_neon_busy);
|
|||
static __must_check inline bool may_use_simd(void)
|
||||
{
|
||||
/*
|
||||
* The raw_cpu_read() is racy if called with preemption enabled.
|
||||
* This is not a bug: kernel_neon_busy is only set when
|
||||
* preemption is disabled, so we cannot migrate to another CPU
|
||||
* while it is set, nor can we migrate to a CPU where it is set.
|
||||
* So, if we find it clear on some CPU then we're guaranteed to
|
||||
* find it clear on any CPU we could migrate to.
|
||||
*
|
||||
* If we are in between kernel_neon_begin()...kernel_neon_end(),
|
||||
* the flag will be set, but preemption is also disabled, so we
|
||||
* can't migrate to another CPU and spuriously see it become
|
||||
* false.
|
||||
* kernel_neon_busy is only set while preemption is disabled,
|
||||
* and is clear whenever preemption is enabled. Since
|
||||
* this_cpu_read() is atomic w.r.t. preemption, kernel_neon_busy
|
||||
* cannot change under our feet -- if it's set we cannot be
|
||||
* migrated, and if it's clear we cannot be migrated to a CPU
|
||||
* where it is set.
|
||||
*/
|
||||
return !in_irq() && !irqs_disabled() && !in_nmi() &&
|
||||
!raw_cpu_read(kernel_neon_busy);
|
||||
!this_cpu_read(kernel_neon_busy);
|
||||
}
|
||||
|
||||
#else /* ! CONFIG_KERNEL_MODE_NEON */
|
||||
|
|
|
@ -122,7 +122,30 @@ static void patch_alternative(struct alt_instr *alt,
|
|||
}
|
||||
}
|
||||
|
||||
static void __apply_alternatives(void *alt_region, bool use_linear_alias)
|
||||
/*
|
||||
* We provide our own, private D-cache cleaning function so that we don't
|
||||
* accidentally call into the cache.S code, which is patched by us at
|
||||
* runtime.
|
||||
*/
|
||||
static void clean_dcache_range_nopatch(u64 start, u64 end)
|
||||
{
|
||||
u64 cur, d_size, ctr_el0;
|
||||
|
||||
ctr_el0 = read_sanitised_ftr_reg(SYS_CTR_EL0);
|
||||
d_size = 4 << cpuid_feature_extract_unsigned_field(ctr_el0,
|
||||
CTR_DMINLINE_SHIFT);
|
||||
cur = start & ~(d_size - 1);
|
||||
do {
|
||||
/*
|
||||
* We must clean+invalidate to the PoC in order to avoid
|
||||
* Cortex-A53 errata 826319, 827319, 824069 and 819472
|
||||
* (this corresponds to ARM64_WORKAROUND_CLEAN_CACHE)
|
||||
*/
|
||||
asm volatile("dc civac, %0" : : "r" (cur) : "memory");
|
||||
} while (cur += d_size, cur < end);
|
||||
}
|
||||
|
||||
static void __apply_alternatives(void *alt_region, bool is_module)
|
||||
{
|
||||
struct alt_instr *alt;
|
||||
struct alt_region *region = alt_region;
|
||||
|
@ -145,7 +168,7 @@ static void __apply_alternatives(void *alt_region, bool use_linear_alias)
|
|||
pr_info_once("patching kernel code\n");
|
||||
|
||||
origptr = ALT_ORIG_PTR(alt);
|
||||
updptr = use_linear_alias ? lm_alias(origptr) : origptr;
|
||||
updptr = is_module ? origptr : lm_alias(origptr);
|
||||
nr_inst = alt->orig_len / AARCH64_INSN_SIZE;
|
||||
|
||||
if (alt->cpufeature < ARM64_CB_PATCH)
|
||||
|
@ -155,8 +178,20 @@ static void __apply_alternatives(void *alt_region, bool use_linear_alias)
|
|||
|
||||
alt_cb(alt, origptr, updptr, nr_inst);
|
||||
|
||||
flush_icache_range((uintptr_t)origptr,
|
||||
(uintptr_t)(origptr + nr_inst));
|
||||
if (!is_module) {
|
||||
clean_dcache_range_nopatch((u64)origptr,
|
||||
(u64)(origptr + nr_inst));
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
* The core module code takes care of cache maintenance in
|
||||
* flush_module_icache().
|
||||
*/
|
||||
if (!is_module) {
|
||||
dsb(ish);
|
||||
__flush_icache_all();
|
||||
isb();
|
||||
}
|
||||
}
|
||||
|
||||
|
@ -178,7 +213,7 @@ static int __apply_alternatives_multi_stop(void *unused)
|
|||
isb();
|
||||
} else {
|
||||
BUG_ON(alternatives_applied);
|
||||
__apply_alternatives(®ion, true);
|
||||
__apply_alternatives(®ion, false);
|
||||
/* Barriers provided by the cache flushing */
|
||||
WRITE_ONCE(alternatives_applied, 1);
|
||||
}
|
||||
|
@ -192,12 +227,14 @@ void __init apply_alternatives_all(void)
|
|||
stop_machine(__apply_alternatives_multi_stop, NULL, cpu_online_mask);
|
||||
}
|
||||
|
||||
void apply_alternatives(void *start, size_t length)
|
||||
#ifdef CONFIG_MODULES
|
||||
void apply_alternatives_module(void *start, size_t length)
|
||||
{
|
||||
struct alt_region region = {
|
||||
.begin = start,
|
||||
.end = start + length,
|
||||
};
|
||||
|
||||
__apply_alternatives(®ion, false);
|
||||
__apply_alternatives(®ion, true);
|
||||
}
|
||||
#endif
|
||||
|
|
|
@ -448,9 +448,8 @@ int module_finalize(const Elf_Ehdr *hdr,
|
|||
const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
|
||||
|
||||
for (s = sechdrs, se = sechdrs + hdr->e_shnum; s < se; s++) {
|
||||
if (strcmp(".altinstructions", secstrs + s->sh_name) == 0) {
|
||||
apply_alternatives((void *)s->sh_addr, s->sh_size);
|
||||
}
|
||||
if (strcmp(".altinstructions", secstrs + s->sh_name) == 0)
|
||||
apply_alternatives_module((void *)s->sh_addr, s->sh_size);
|
||||
#ifdef CONFIG_ARM64_MODULE_PLTS
|
||||
if (IS_ENABLED(CONFIG_DYNAMIC_FTRACE) &&
|
||||
!strcmp(".text.ftrace_trampoline", secstrs + s->sh_name))
|
||||
|
|
|
@ -44,6 +44,7 @@ extern inline pmd_t *pmd_alloc_kernel(pgd_t *pgd, unsigned long address)
|
|||
static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t page,
|
||||
unsigned long address)
|
||||
{
|
||||
pgtable_page_dtor(page);
|
||||
__free_page(page);
|
||||
}
|
||||
|
||||
|
@ -74,8 +75,9 @@ static inline struct page *pte_alloc_one(struct mm_struct *mm,
|
|||
return page;
|
||||
}
|
||||
|
||||
extern inline void pte_free(struct mm_struct *mm, struct page *page)
|
||||
static inline void pte_free(struct mm_struct *mm, struct page *page)
|
||||
{
|
||||
pgtable_page_dtor(page);
|
||||
__free_page(page);
|
||||
}
|
||||
|
||||
|
|
|
@ -8,11 +8,4 @@ config TRACE_IRQFLAGS_SUPPORT
|
|||
|
||||
source "lib/Kconfig.debug"
|
||||
|
||||
config HEART_BEAT
|
||||
bool "Heart beat function for kernel"
|
||||
default n
|
||||
help
|
||||
This option turns on/off heart beat kernel functionality.
|
||||
First GPIO node is taken.
|
||||
|
||||
endmenu
|
||||
|
|
|
@ -19,15 +19,10 @@ extern char cmd_line[COMMAND_LINE_SIZE];
|
|||
|
||||
extern char *klimit;
|
||||
|
||||
void microblaze_heartbeat(void);
|
||||
void microblaze_setup_heartbeat(void);
|
||||
|
||||
# ifdef CONFIG_MMU
|
||||
extern void mmu_reset(void);
|
||||
# endif /* CONFIG_MMU */
|
||||
|
||||
extern void of_platform_reset_gpio_probe(void);
|
||||
|
||||
void time_init(void);
|
||||
void init_IRQ(void);
|
||||
void machine_early_init(const char *cmdline, unsigned int ram,
|
||||
|
|
|
@ -38,6 +38,6 @@
|
|||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
|
||||
#define __NR_syscalls 399
|
||||
#define __NR_syscalls 401
|
||||
|
||||
#endif /* _ASM_MICROBLAZE_UNISTD_H */
|
||||
|
|
|
@ -415,5 +415,7 @@
|
|||
#define __NR_pkey_alloc 396
|
||||
#define __NR_pkey_free 397
|
||||
#define __NR_statx 398
|
||||
#define __NR_io_pgetevents 399
|
||||
#define __NR_rseq 400
|
||||
|
||||
#endif /* _UAPI_ASM_MICROBLAZE_UNISTD_H */
|
||||
|
|
|
@ -8,7 +8,6 @@ ifdef CONFIG_FUNCTION_TRACER
|
|||
CFLAGS_REMOVE_timer.o = -pg
|
||||
CFLAGS_REMOVE_intc.o = -pg
|
||||
CFLAGS_REMOVE_early_printk.o = -pg
|
||||
CFLAGS_REMOVE_heartbeat.o = -pg
|
||||
CFLAGS_REMOVE_ftrace.o = -pg
|
||||
CFLAGS_REMOVE_process.o = -pg
|
||||
endif
|
||||
|
@ -17,12 +16,11 @@ extra-y := head.o vmlinux.lds
|
|||
|
||||
obj-y += dma.o exceptions.o \
|
||||
hw_exception_handler.o irq.o \
|
||||
platform.o process.o prom.o ptrace.o \
|
||||
process.o prom.o ptrace.o \
|
||||
reset.o setup.o signal.o sys_microblaze.o timer.o traps.o unwind.o
|
||||
|
||||
obj-y += cpu/
|
||||
|
||||
obj-$(CONFIG_HEART_BEAT) += heartbeat.o
|
||||
obj-$(CONFIG_MODULES) += microblaze_ksyms.o module.o
|
||||
obj-$(CONFIG_MMU) += misc.o
|
||||
obj-$(CONFIG_STACKTRACE) += stacktrace.o
|
||||
|
|
|
@ -1,72 +0,0 @@
|
|||
/*
|
||||
* Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
|
||||
* Copyright (C) 2007-2009 PetaLogix
|
||||
* Copyright (C) 2006 Atmark Techno, Inc.
|
||||
*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file "COPYING" in the main directory of this archive
|
||||
* for more details.
|
||||
*/
|
||||
|
||||
#include <linux/sched.h>
|
||||
#include <linux/sched/loadavg.h>
|
||||
#include <linux/io.h>
|
||||
|
||||
#include <asm/setup.h>
|
||||
#include <asm/page.h>
|
||||
#include <asm/prom.h>
|
||||
|
||||
static unsigned int base_addr;
|
||||
|
||||
void microblaze_heartbeat(void)
|
||||
{
|
||||
static unsigned int cnt, period, dist;
|
||||
|
||||
if (base_addr) {
|
||||
if (cnt == 0 || cnt == dist)
|
||||
out_be32(base_addr, 1);
|
||||
else if (cnt == 7 || cnt == dist + 7)
|
||||
out_be32(base_addr, 0);
|
||||
|
||||
if (++cnt > period) {
|
||||
cnt = 0;
|
||||
/*
|
||||
* The hyperbolic function below modifies the heartbeat
|
||||
* period length in dependency of the current (5min)
|
||||
* load. It goes through the points f(0)=126, f(1)=86,
|
||||
* f(5)=51, f(inf)->30.
|
||||
*/
|
||||
period = ((672 << FSHIFT) / (5 * avenrun[0] +
|
||||
(7 << FSHIFT))) + 30;
|
||||
dist = period / 4;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void microblaze_setup_heartbeat(void)
|
||||
{
|
||||
struct device_node *gpio = NULL;
|
||||
int *prop;
|
||||
int j;
|
||||
const char * const gpio_list[] = {
|
||||
"xlnx,xps-gpio-1.00.a",
|
||||
NULL
|
||||
};
|
||||
|
||||
for (j = 0; gpio_list[j] != NULL; j++) {
|
||||
gpio = of_find_compatible_node(NULL, NULL, gpio_list[j]);
|
||||
if (gpio)
|
||||
break;
|
||||
}
|
||||
|
||||
if (gpio) {
|
||||
base_addr = be32_to_cpup(of_get_property(gpio, "reg", NULL));
|
||||
base_addr = (unsigned long) ioremap(base_addr, PAGE_SIZE);
|
||||
pr_notice("Heartbeat GPIO at 0x%x\n", base_addr);
|
||||
|
||||
/* GPIO is configured as output */
|
||||
prop = (int *) of_get_property(gpio, "xlnx,is-bidir", NULL);
|
||||
if (prop)
|
||||
out_be32(base_addr + 4, 0);
|
||||
}
|
||||
}
|
|
@ -1,29 +0,0 @@
|
|||
/*
|
||||
* Copyright 2008 Michal Simek <monstr@monstr.eu>
|
||||
*
|
||||
* based on virtex.c file
|
||||
*
|
||||
* Copyright 2007 Secret Lab Technologies Ltd.
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public License
|
||||
* version 2. This program is licensed "as is" without any warranty of any
|
||||
* kind, whether express or implied.
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/of_platform.h>
|
||||
#include <asm/setup.h>
|
||||
|
||||
static struct of_device_id xilinx_of_bus_ids[] __initdata = {
|
||||
{ .compatible = "simple-bus", },
|
||||
{ .compatible = "xlnx,compound", },
|
||||
{}
|
||||
};
|
||||
|
||||
static int __init microblaze_device_probe(void)
|
||||
{
|
||||
of_platform_bus_probe(NULL, xilinx_of_bus_ids, NULL);
|
||||
of_platform_reset_gpio_probe();
|
||||
return 0;
|
||||
}
|
||||
device_initcall(microblaze_device_probe);
|
|
@ -18,7 +18,7 @@
|
|||
static int handle; /* reset pin handle */
|
||||
static unsigned int reset_val;
|
||||
|
||||
void of_platform_reset_gpio_probe(void)
|
||||
static int of_platform_reset_gpio_probe(void)
|
||||
{
|
||||
int ret;
|
||||
handle = of_get_named_gpio(of_find_node_by_path("/"),
|
||||
|
@ -27,13 +27,13 @@ void of_platform_reset_gpio_probe(void)
|
|||
if (!gpio_is_valid(handle)) {
|
||||
pr_info("Skipping unavailable RESET gpio %d (%s)\n",
|
||||
handle, "reset");
|
||||
return;
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
ret = gpio_request(handle, "reset");
|
||||
if (ret < 0) {
|
||||
pr_info("GPIO pin is already allocated\n");
|
||||
return;
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* get current setup value */
|
||||
|
@ -51,11 +51,12 @@ void of_platform_reset_gpio_probe(void)
|
|||
|
||||
pr_info("RESET: Registered gpio device: %d, current val: %d\n",
|
||||
handle, reset_val);
|
||||
return;
|
||||
return 0;
|
||||
err:
|
||||
gpio_free(handle);
|
||||
return;
|
||||
return ret;
|
||||
}
|
||||
device_initcall(of_platform_reset_gpio_probe);
|
||||
|
||||
|
||||
static void gpio_system_reset(void)
|
||||
|
|
|
@ -400,3 +400,5 @@ ENTRY(sys_call_table)
|
|||
.long sys_pkey_alloc
|
||||
.long sys_pkey_free
|
||||
.long sys_statx
|
||||
.long sys_io_pgetevents
|
||||
.long sys_rseq
|
||||
|
|
|
@ -156,9 +156,6 @@ static inline void timer_ack(void)
|
|||
static irqreturn_t timer_interrupt(int irq, void *dev_id)
|
||||
{
|
||||
struct clock_event_device *evt = &clockevent_xilinx_timer;
|
||||
#ifdef CONFIG_HEART_BEAT
|
||||
microblaze_heartbeat();
|
||||
#endif
|
||||
timer_ack();
|
||||
evt->event_handler(evt);
|
||||
return IRQ_HANDLED;
|
||||
|
@ -318,10 +315,6 @@ static int __init xilinx_timer_init(struct device_node *timer)
|
|||
return ret;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_HEART_BEAT
|
||||
microblaze_setup_heartbeat();
|
||||
#endif
|
||||
|
||||
ret = xilinx_clocksource_init();
|
||||
if (ret)
|
||||
return ret;
|
||||
|
|
|
@ -29,6 +29,7 @@
|
|||
#include <linux/kallsyms.h>
|
||||
#include <linux/random.h>
|
||||
#include <linux/prctl.h>
|
||||
#include <linux/nmi.h>
|
||||
|
||||
#include <asm/asm.h>
|
||||
#include <asm/bootinfo.h>
|
||||
|
@ -655,28 +656,42 @@ unsigned long arch_align_stack(unsigned long sp)
|
|||
return sp & ALMASK;
|
||||
}
|
||||
|
||||
static void arch_dump_stack(void *info)
|
||||
static DEFINE_PER_CPU(call_single_data_t, backtrace_csd);
|
||||
static struct cpumask backtrace_csd_busy;
|
||||
|
||||
static void handle_backtrace(void *info)
|
||||
{
|
||||
struct pt_regs *regs;
|
||||
nmi_cpu_backtrace(get_irq_regs());
|
||||
cpumask_clear_cpu(smp_processor_id(), &backtrace_csd_busy);
|
||||
}
|
||||
|
||||
regs = get_irq_regs();
|
||||
static void raise_backtrace(cpumask_t *mask)
|
||||
{
|
||||
call_single_data_t *csd;
|
||||
int cpu;
|
||||
|
||||
if (regs)
|
||||
show_regs(regs);
|
||||
for_each_cpu(cpu, mask) {
|
||||
/*
|
||||
* If we previously sent an IPI to the target CPU & it hasn't
|
||||
* cleared its bit in the busy cpumask then it didn't handle
|
||||
* our previous IPI & it's not safe for us to reuse the
|
||||
* call_single_data_t.
|
||||
*/
|
||||
if (cpumask_test_and_set_cpu(cpu, &backtrace_csd_busy)) {
|
||||
pr_warn("Unable to send backtrace IPI to CPU%u - perhaps it hung?\n",
|
||||
cpu);
|
||||
continue;
|
||||
}
|
||||
|
||||
dump_stack();
|
||||
csd = &per_cpu(backtrace_csd, cpu);
|
||||
csd->func = handle_backtrace;
|
||||
smp_call_function_single_async(cpu, csd);
|
||||
}
|
||||
}
|
||||
|
||||
void arch_trigger_cpumask_backtrace(const cpumask_t *mask, bool exclude_self)
|
||||
{
|
||||
long this_cpu = get_cpu();
|
||||
|
||||
if (cpumask_test_cpu(this_cpu, mask) && !exclude_self)
|
||||
dump_stack();
|
||||
|
||||
smp_call_function_many(mask, arch_dump_stack, NULL, 1);
|
||||
|
||||
put_cpu();
|
||||
nmi_trigger_cpumask_backtrace(mask, exclude_self, raise_backtrace);
|
||||
}
|
||||
|
||||
int mips_get_process_fp_mode(struct task_struct *task)
|
||||
|
|
|
@ -801,7 +801,7 @@ static void handle_signal(struct ksignal *ksig, struct pt_regs *regs)
|
|||
regs->regs[0] = 0; /* Don't deal with this again. */
|
||||
}
|
||||
|
||||
rseq_signal_deliver(regs);
|
||||
rseq_signal_deliver(ksig, regs);
|
||||
|
||||
if (sig_uses_siginfo(&ksig->ka, abi))
|
||||
ret = abi->setup_rt_frame(vdso + abi->vdso->off_rt_sigreturn,
|
||||
|
@ -870,7 +870,7 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, void *unused,
|
|||
if (thread_info_flags & _TIF_NOTIFY_RESUME) {
|
||||
clear_thread_flag(TIF_NOTIFY_RESUME);
|
||||
tracehook_notify_resume(regs);
|
||||
rseq_handle_notify_resume(regs);
|
||||
rseq_handle_notify_resume(NULL, regs);
|
||||
}
|
||||
|
||||
user_enter();
|
||||
|
|
|
@ -351,6 +351,7 @@ static void __show_regs(const struct pt_regs *regs)
|
|||
void show_regs(struct pt_regs *regs)
|
||||
{
|
||||
__show_regs((struct pt_regs *)regs);
|
||||
dump_stack();
|
||||
}
|
||||
|
||||
void show_registers(struct pt_regs *regs)
|
||||
|
|
|
@ -9,6 +9,7 @@
|
|||
#include <linux/export.h>
|
||||
#include <asm/addrspace.h>
|
||||
#include <asm/byteorder.h>
|
||||
#include <linux/ioport.h>
|
||||
#include <linux/sched.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/vmalloc.h>
|
||||
|
@ -98,6 +99,20 @@ static int remap_area_pages(unsigned long address, phys_addr_t phys_addr,
|
|||
return error;
|
||||
}
|
||||
|
||||
static int __ioremap_check_ram(unsigned long start_pfn, unsigned long nr_pages,
|
||||
void *arg)
|
||||
{
|
||||
unsigned long i;
|
||||
|
||||
for (i = 0; i < nr_pages; i++) {
|
||||
if (pfn_valid(start_pfn + i) &&
|
||||
!PageReserved(pfn_to_page(start_pfn + i)))
|
||||
return 1;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* Generic mapping function (not visible outside):
|
||||
*/
|
||||
|
@ -116,8 +131,8 @@ static int remap_area_pages(unsigned long address, phys_addr_t phys_addr,
|
|||
|
||||
void __iomem * __ioremap(phys_addr_t phys_addr, phys_addr_t size, unsigned long flags)
|
||||
{
|
||||
unsigned long offset, pfn, last_pfn;
|
||||
struct vm_struct * area;
|
||||
unsigned long offset;
|
||||
phys_addr_t last_addr;
|
||||
void * addr;
|
||||
|
||||
|
@ -137,18 +152,16 @@ void __iomem * __ioremap(phys_addr_t phys_addr, phys_addr_t size, unsigned long
|
|||
return (void __iomem *) CKSEG1ADDR(phys_addr);
|
||||
|
||||
/*
|
||||
* Don't allow anybody to remap normal RAM that we're using..
|
||||
* Don't allow anybody to remap RAM that may be allocated by the page
|
||||
* allocator, since that could lead to races & data clobbering.
|
||||
*/
|
||||
if (phys_addr < virt_to_phys(high_memory)) {
|
||||
char *t_addr, *t_end;
|
||||
struct page *page;
|
||||
|
||||
t_addr = __va(phys_addr);
|
||||
t_end = t_addr + (size - 1);
|
||||
|
||||
for(page = virt_to_page(t_addr); page <= virt_to_page(t_end); page++)
|
||||
if(!PageReserved(page))
|
||||
return NULL;
|
||||
pfn = PFN_DOWN(phys_addr);
|
||||
last_pfn = PFN_DOWN(last_addr);
|
||||
if (walk_system_ram_range(pfn, last_pfn - pfn + 1, NULL,
|
||||
__ioremap_check_ram) == 1) {
|
||||
WARN_ONCE(1, "ioremap on RAM at %pa - %pa\n",
|
||||
&phys_addr, &last_addr);
|
||||
return NULL;
|
||||
}
|
||||
|
||||
/*
|
||||
|
|
|
@ -98,8 +98,12 @@ static inline void pte_free(struct mm_struct *mm, struct page *pte)
|
|||
__free_page(pte);
|
||||
}
|
||||
|
||||
#define __pte_free_tlb(tlb, pte, addr) \
|
||||
do { \
|
||||
pgtable_page_dtor(pte); \
|
||||
tlb_remove_page((tlb), (pte)); \
|
||||
} while (0)
|
||||
|
||||
#define __pte_free_tlb(tlb, pte, addr) tlb_remove_page((tlb), (pte))
|
||||
#define pmd_pgtable(pmd) pmd_page(pmd)
|
||||
|
||||
#define check_pgt_cache() do { } while (0)
|
||||
|
|
|
@ -277,12 +277,6 @@ EXCEPTION_ENTRY(_data_page_fault_handler)
|
|||
l.addi r3,r1,0 // pt_regs
|
||||
/* r4 set be EXCEPTION_HANDLE */ // effective address of fault
|
||||
|
||||
/*
|
||||
* __PHX__: TODO
|
||||
*
|
||||
* all this can be written much simpler. look at
|
||||
* DTLB miss handler in the CONFIG_GUARD_PROTECTED_CORE part
|
||||
*/
|
||||
#ifdef CONFIG_OPENRISC_NO_SPR_SR_DSX
|
||||
l.lwz r6,PT_PC(r3) // address of an offending insn
|
||||
l.lwz r6,0(r6) // instruction that caused pf
|
||||
|
@ -314,7 +308,7 @@ EXCEPTION_ENTRY(_data_page_fault_handler)
|
|||
|
||||
#else
|
||||
|
||||
l.lwz r6,PT_SR(r3) // SR
|
||||
l.mfspr r6,r0,SPR_SR // SR
|
||||
l.andi r6,r6,SPR_SR_DSX // check for delay slot exception
|
||||
l.sfne r6,r0 // exception happened in delay slot
|
||||
l.bnf 7f
|
||||
|
|
|
@ -210,8 +210,7 @@
|
|||
* r4 - EEAR exception EA
|
||||
* r10 - current pointing to current_thread_info struct
|
||||
* r12 - syscall 0, since we didn't come from syscall
|
||||
* r13 - temp it actually contains new SR, not needed anymore
|
||||
* r31 - handler address of the handler we'll jump to
|
||||
* r30 - handler address of the handler we'll jump to
|
||||
*
|
||||
* handler has to save remaining registers to the exception
|
||||
* ksp frame *before* tainting them!
|
||||
|
@ -244,6 +243,7 @@
|
|||
/* r1 is KSP, r30 is __pa(KSP) */ ;\
|
||||
tophys (r30,r1) ;\
|
||||
l.sw PT_GPR12(r30),r12 ;\
|
||||
/* r4 use for tmp before EA */ ;\
|
||||
l.mfspr r12,r0,SPR_EPCR_BASE ;\
|
||||
l.sw PT_PC(r30),r12 ;\
|
||||
l.mfspr r12,r0,SPR_ESR_BASE ;\
|
||||
|
@ -263,7 +263,10 @@
|
|||
/* r12 == 1 if we come from syscall */ ;\
|
||||
CLEAR_GPR(r12) ;\
|
||||
/* ----- turn on MMU ----- */ ;\
|
||||
l.ori r30,r0,(EXCEPTION_SR) ;\
|
||||
/* Carry DSX into exception SR */ ;\
|
||||
l.mfspr r30,r0,SPR_SR ;\
|
||||
l.andi r30,r30,SPR_SR_DSX ;\
|
||||
l.ori r30,r30,(EXCEPTION_SR) ;\
|
||||
l.mtspr r0,r30,SPR_ESR_BASE ;\
|
||||
/* r30: EA address of handler */ ;\
|
||||
LOAD_SYMBOL_2_GPR(r30,handler) ;\
|
||||
|
|
|
@ -300,7 +300,7 @@ static inline int in_delay_slot(struct pt_regs *regs)
|
|||
return 0;
|
||||
}
|
||||
#else
|
||||
return regs->sr & SPR_SR_DSX;
|
||||
return mfspr(SPR_SR) & SPR_SR_DSX;
|
||||
#endif
|
||||
}
|
||||
|
||||
|
|
|
@ -244,11 +244,11 @@ config PARISC_PAGE_SIZE_4KB
|
|||
|
||||
config PARISC_PAGE_SIZE_16KB
|
||||
bool "16KB"
|
||||
depends on PA8X00
|
||||
depends on PA8X00 && BROKEN
|
||||
|
||||
config PARISC_PAGE_SIZE_64KB
|
||||
bool "64KB"
|
||||
depends on PA8X00
|
||||
depends on PA8X00 && BROKEN
|
||||
|
||||
endchoice
|
||||
|
||||
|
@ -347,7 +347,7 @@ config NR_CPUS
|
|||
int "Maximum number of CPUs (2-32)"
|
||||
range 2 32
|
||||
depends on SMP
|
||||
default "32"
|
||||
default "4"
|
||||
|
||||
endmenu
|
||||
|
||||
|
|
|
@ -65,10 +65,6 @@ endif
|
|||
# kernel.
|
||||
cflags-y += -mdisable-fpregs
|
||||
|
||||
# Without this, "ld -r" results in .text sections that are too big
|
||||
# (> 0x40000) for branches to reach stubs.
|
||||
cflags-y += -ffunction-sections
|
||||
|
||||
# Use long jumps instead of long branches (needed if your linker fails to
|
||||
# link a too big vmlinux executable). Not enabled for building modules.
|
||||
ifdef CONFIG_MLONGCALLS
|
||||
|
|
|
@ -21,14 +21,6 @@ typedef struct {
|
|||
unsigned long sig[_NSIG_WORDS];
|
||||
} sigset_t;
|
||||
|
||||
#ifndef __KERNEL__
|
||||
struct sigaction {
|
||||
__sighandler_t sa_handler;
|
||||
unsigned long sa_flags;
|
||||
sigset_t sa_mask; /* mask last for extensibility */
|
||||
};
|
||||
#endif
|
||||
|
||||
#include <asm/sigcontext.h>
|
||||
|
||||
#endif /* !__ASSEMBLY */
|
||||
|
|
|
@ -364,8 +364,9 @@
|
|||
#define __NR_preadv2 (__NR_Linux + 347)
|
||||
#define __NR_pwritev2 (__NR_Linux + 348)
|
||||
#define __NR_statx (__NR_Linux + 349)
|
||||
#define __NR_io_pgetevents (__NR_Linux + 350)
|
||||
|
||||
#define __NR_Linux_syscalls (__NR_statx + 1)
|
||||
#define __NR_Linux_syscalls (__NR_io_pgetevents + 1)
|
||||
|
||||
|
||||
#define __IGNORE_select /* newselect */
|
||||
|
|
|
@ -154,17 +154,14 @@ int register_parisc_driver(struct parisc_driver *driver)
|
|||
{
|
||||
/* FIXME: we need this because apparently the sti
|
||||
* driver can be registered twice */
|
||||
if(driver->drv.name) {
|
||||
printk(KERN_WARNING
|
||||
"BUG: skipping previously registered driver %s\n",
|
||||
driver->name);
|
||||
if (driver->drv.name) {
|
||||
pr_warn("BUG: skipping previously registered driver %s\n",
|
||||
driver->name);
|
||||
return 1;
|
||||
}
|
||||
|
||||
if (!driver->probe) {
|
||||
printk(KERN_WARNING
|
||||
"BUG: driver %s has no probe routine\n",
|
||||
driver->name);
|
||||
pr_warn("BUG: driver %s has no probe routine\n", driver->name);
|
||||
return 1;
|
||||
}
|
||||
|
||||
|
@ -491,12 +488,9 @@ alloc_pa_dev(unsigned long hpa, struct hardware_path *mod_path)
|
|||
|
||||
dev = create_parisc_device(mod_path);
|
||||
if (dev->id.hw_type != HPHW_FAULTY) {
|
||||
printk(KERN_ERR "Two devices have hardware path [%s]. "
|
||||
"IODC data for second device: "
|
||||
"%02x%02x%02x%02x%02x%02x\n"
|
||||
"Rearranging GSC cards sometimes helps\n",
|
||||
parisc_pathname(dev), iodc_data[0], iodc_data[1],
|
||||
iodc_data[3], iodc_data[4], iodc_data[5], iodc_data[6]);
|
||||
pr_err("Two devices have hardware path [%s]. IODC data for second device: %7phN\n"
|
||||
"Rearranging GSC cards sometimes helps\n",
|
||||
parisc_pathname(dev), iodc_data);
|
||||
return NULL;
|
||||
}
|
||||
|
||||
|
@ -528,8 +522,7 @@ alloc_pa_dev(unsigned long hpa, struct hardware_path *mod_path)
|
|||
* the keyboard controller
|
||||
*/
|
||||
if ((hpa & 0xfff) == 0 && insert_resource(&iomem_resource, &dev->hpa))
|
||||
printk("Unable to claim HPA %lx for device %s\n",
|
||||
hpa, name);
|
||||
pr_warn("Unable to claim HPA %lx for device %s\n", hpa, name);
|
||||
|
||||
return dev;
|
||||
}
|
||||
|
@ -875,7 +868,7 @@ static void print_parisc_device(struct parisc_device *dev)
|
|||
static int count;
|
||||
|
||||
print_pa_hwpath(dev, hw_path);
|
||||
printk(KERN_INFO "%d. %s at 0x%px [%s] { %d, 0x%x, 0x%.3x, 0x%.5x }",
|
||||
pr_info("%d. %s at 0x%px [%s] { %d, 0x%x, 0x%.3x, 0x%.5x }",
|
||||
++count, dev->name, (void*) dev->hpa.start, hw_path, dev->id.hw_type,
|
||||
dev->id.hversion_rev, dev->id.hversion, dev->id.sversion);
|
||||
|
||||
|
|
|
@ -445,6 +445,7 @@
|
|||
ENTRY_COMP(preadv2)
|
||||
ENTRY_COMP(pwritev2)
|
||||
ENTRY_SAME(statx)
|
||||
ENTRY_COMP(io_pgetevents) /* 350 */
|
||||
|
||||
|
||||
.ifne (. - 90b) - (__NR_Linux_syscalls * (91b - 90b))
|
||||
|
|
|
@ -25,7 +25,7 @@
|
|||
|
||||
/* #define DEBUG 1 */
|
||||
#ifdef DEBUG
|
||||
#define dbg(x...) printk(x)
|
||||
#define dbg(x...) pr_debug(x)
|
||||
#else
|
||||
#define dbg(x...)
|
||||
#endif
|
||||
|
@ -182,7 +182,7 @@ int __init unwind_init(void)
|
|||
start = (long)&__start___unwind[0];
|
||||
stop = (long)&__stop___unwind[0];
|
||||
|
||||
printk("unwind_init: start = 0x%lx, end = 0x%lx, entries = %lu\n",
|
||||
dbg("unwind_init: start = 0x%lx, end = 0x%lx, entries = %lu\n",
|
||||
start, stop,
|
||||
(stop - start) / sizeof(struct unwind_table_entry));
|
||||
|
||||
|
|
|
@ -138,7 +138,6 @@ static inline void pgtable_free_tlb(struct mmu_gather *tlb,
|
|||
static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t table,
|
||||
unsigned long address)
|
||||
{
|
||||
pgtable_page_dtor(table);
|
||||
pgtable_free_tlb(tlb, page_address(table), 0);
|
||||
}
|
||||
#endif /* _ASM_POWERPC_BOOK3S_32_PGALLOC_H */
|
||||
|
|
|
@ -140,7 +140,6 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t table,
|
|||
unsigned long address)
|
||||
{
|
||||
tlb_flush_pgtable(tlb, address);
|
||||
pgtable_page_dtor(table);
|
||||
pgtable_free_tlb(tlb, page_address(table), 0);
|
||||
}
|
||||
#endif /* _ASM_POWERPC_PGALLOC_32_H */
|
||||
|
|
|
@ -393,3 +393,4 @@ SYSCALL(pkey_alloc)
|
|||
SYSCALL(pkey_free)
|
||||
SYSCALL(pkey_mprotect)
|
||||
SYSCALL(rseq)
|
||||
COMPAT_SYS(io_pgetevents)
|
||||
|
|
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue