OpenE2K/linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

spi: sprd: convert transfer word delay to spi_delay struct

Browse Source 
The Spreadtrum SPI driver is the only user of the `word_delay` field in
the `spi_transfer` struct.

This change converts the field to use the `spi_delay` struct. This also
enforces the users to specify the delay unit to be `SPI_DELAY_UNIT_SCK`.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20190926105147.7839-5-alexandru.ardelean@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Alexandru Ardelean 2019-09-26 13:51:32 +03:00 committed by Mark Brown
parent 329f0dac4c
commit 84593a131c
No known key found for this signature in database
GPG Key ID: 24D68B725D5487D0
2 changed files with 14 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

15
drivers/spi/spi-sprd.c
View File

@ -669,11 +669,15 @@ static void sprd_spi_set_speed(struct sprd_spi *ss, u32 speed_hz)
writel_relaxed(clk_div, ss->base + SPRD_SPI_CLKD);
}
static void sprd_spi_init_hw(struct sprd_spi *ss, struct spi_transfer *t)
static int sprd_spi_init_hw(struct sprd_spi *ss, struct spi_transfer *t)
{
struct spi_delay *d = &t->word_delay;
u16 word_delay, interval;
u32 val;
if (d->unit != SPI_DELAY_UNIT_SCK)
return -EINVAL;
val = readl_relaxed(ss->base + SPRD_SPI_CTL7);
val &= ~(SPRD_SPI_SCK_REV | SPRD_SPI_NG_TX | SPRD_SPI_NG_RX);
/* Set default chip selection, clock phase and clock polarity */
@ -686,7 +690,7 @@ static void sprd_spi_init_hw(struct sprd_spi *ss, struct spi_transfer *t)
* formula as below per datasheet:
* interval time (source clock cycles) = interval * 4 + 10.
*/
word_delay = clamp_t(u16, t->word_delay, SPRD_SPI_MIN_DELAY_CYCLE,
word_delay = clamp_t(u16, d->value, SPRD_SPI_MIN_DELAY_CYCLE,
SPRD_SPI_MAX_DELAY_CYCLE);
interval = DIV_ROUND_UP(word_delay - 10, 4);
ss->word_delay = interval * 4 + 10;
@ -711,6 +715,8 @@ static void sprd_spi_init_hw(struct sprd_spi *ss, struct spi_transfer *t)
val &= ~SPRD_SPI_DATA_LINE2_EN;
writel_relaxed(val, ss->base + SPRD_SPI_CTL7);
return 0;
}
static int sprd_spi_setup_transfer(struct spi_device *sdev,
@ -719,13 +725,16 @@ static int sprd_spi_setup_transfer(struct spi_device *sdev,
struct sprd_spi *ss = spi_controller_get_devdata(sdev->controller);
u8 bits_per_word = t->bits_per_word;
u32 val, mode = 0;
int ret;
ss->len = t->len;
ss->tx_buf = t->tx_buf;
ss->rx_buf = t->rx_buf;
ss->hw_mode = sdev->mode;
sprd_spi_init_hw(ss, t);
ret = sprd_spi_init_hw(ss, t);
if (ret)
return ret;
/* Set tansfer speed and valid bits */
sprd_spi_set_speed(ss, t->speed_hz);

4
include/linux/spi/spi.h
View File

@ -783,7 +783,7 @@ extern void spi_res_release(struct spi_controller *ctlr,
* the next transfer or completing this @spi_message.
* @word_delay_usecs: microseconds to inter word delay after each word size
* (set by bits_per_word) transmission.
* @word_delay: clock cycles to inter word delay after each word size
* @word_delay: inter word delay to be introduced after each word size
* (set by bits_per_word) transmission.
* @effective_speed_hz: the effective SCK-speed that was used to
* transfer this transfer. Set to 0 if the spi bus driver does
@ -900,8 +900,8 @@ struct spi_transfer {
u8 word_delay_usecs;
u16 delay_usecs;
struct spi_delay cs_change_delay;
struct spi_delay word_delay;
u32 speed_hz;
u16 word_delay;
u32 effective_speed_hz;