diff --git a/drivers/scsi/aha1542.c b/drivers/scsi/aha1542.c index 67fdd2fad9a7..4bfba454a032 100644 --- a/drivers/scsi/aha1542.c +++ b/drivers/scsi/aha1542.c @@ -1070,7 +1070,7 @@ static int aha1542_dev_reset(Scsi_Cmnd * SCpnt) return SUCCESS; } -static int aha1542_bus_reset(Scsi_Cmnd * SCpnt) +static int aha1542_reset(Scsi_Cmnd *SCpnt, u8 reset_cmd) { struct aha1542_hostdata *aha1542 = shost_priv(SCpnt->device->host); int i; @@ -1081,7 +1081,7 @@ static int aha1542_bus_reset(Scsi_Cmnd * SCpnt) * we do this? Try this first, and we can add that later * if it turns out to be useful. */ - outb(SCRST, CONTROL(SCpnt->device->host->io_port)); + outb(reset_cmd, CONTROL(SCpnt->device->host->io_port)); /* * Wait for the thing to settle down a bit. Unfortunately @@ -1091,7 +1091,6 @@ static int aha1542_bus_reset(Scsi_Cmnd * SCpnt) * we are pretty desperate anyways. */ ssleep(4); - spin_lock_irq(SCpnt->device->host->host_lock); if (!wait_mask(STATUS(SCpnt->device->host->io_port), @@ -1099,7 +1098,12 @@ static int aha1542_bus_reset(Scsi_Cmnd * SCpnt) spin_unlock_irq(SCpnt->device->host->host_lock); return FAILED; } - + /* + * We need to do this too before the 1542 can interact with + * us again after host reset. + */ + if (reset_cmd & HRST) + setup_mailboxes(SCpnt->device->host->io_port, SCpnt->device->host); /* * Now try to pick up the pieces. For all pending commands, * free any internal data structures, and basically clear things @@ -1113,7 +1117,6 @@ static int aha1542_bus_reset(Scsi_Cmnd * SCpnt) Scsi_Cmnd *SCtmp; SCtmp = aha1542->SCint[i]; - if (SCtmp->device->soft_reset) { /* * If this device implements the soft reset option, @@ -1134,71 +1137,14 @@ static int aha1542_bus_reset(Scsi_Cmnd * SCpnt) return SUCCESS; } -static int aha1542_host_reset(Scsi_Cmnd * SCpnt) +static int aha1542_bus_reset(Scsi_Cmnd *SCpnt) { - struct aha1542_hostdata *aha1542 = shost_priv(SCpnt->device->host); - int i; + return aha1542_reset(SCpnt, SCRST); +} - /* - * This does a scsi reset for all devices on the bus. - * In principle, we could also reset the 1542 - should - * we do this? Try this first, and we can add that later - * if it turns out to be useful. - */ - outb(HRST | SCRST, CONTROL(SCpnt->device->host->io_port)); - - /* - * Wait for the thing to settle down a bit. Unfortunately - * this is going to basically lock up the machine while we - * wait for this to complete. To be 100% correct, we need to - * check for timeout, and if we are doing something like this - * we are pretty desperate anyways. - */ - ssleep(4); - spin_lock_irq(SCpnt->device->host->host_lock); - - if (!wait_mask(STATUS(SCpnt->device->host->io_port), - STATMASK, INIT | IDLE, STST | DIAGF | INVDCMD | DF | CDF, 0)) { - spin_unlock_irq(SCpnt->device->host->host_lock); - return FAILED; - } - /* - * We need to do this too before the 1542 can interact with - * us again. - */ - setup_mailboxes(SCpnt->device->host->io_port, SCpnt->device->host); - - /* - * Now try to pick up the pieces. For all pending commands, - * free any internal data structures, and basically clear things - * out. We do not try and restart any commands or anything - - * the strategy handler takes care of that crap. - */ - printk(KERN_WARNING "Sent BUS RESET to scsi host %d\n", SCpnt->device->host->host_no); - - for (i = 0; i < AHA1542_MAILBOXES; i++) { - if (aha1542->SCint[i] != NULL) { - Scsi_Cmnd *SCtmp; - SCtmp = aha1542->SCint[i]; - - if (SCtmp->device->soft_reset) { - /* - * If this device implements the soft reset option, - * then it is still holding onto the command, and - * may yet complete it. In this case, we don't - * flush the data. - */ - continue; - } - kfree(SCtmp->host_scribble); - SCtmp->host_scribble = NULL; - aha1542->SCint[i] = NULL; - aha1542->mb[i].status = 0; - } - } - - spin_unlock_irq(SCpnt->device->host->host_lock); - return SUCCESS; +static int aha1542_host_reset(Scsi_Cmnd *SCpnt) +{ + return aha1542_reset(SCpnt, HRST | SCRST); } static int aha1542_biosparam(struct scsi_device *sdev,