bnx2x: Removing redundant device parameters

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Eilon Greenstein 2009-02-12 08:36:49 +00:00 committed by David S. Miller
parent 35b19ba51c
commit 87942b4678
2 changed files with 9 additions and 15 deletions

View File

@ -525,8 +525,6 @@ struct bnx2x_common {
u32 hw_config;
u32 bc_ver;
char *name;
};
@ -798,7 +796,6 @@ struct bnx2x {
#endif
u32 rx_csum;
u32 rx_offset;
u32 rx_buf_size;
#define ETH_OVREHEAD (ETH_HLEN + 8) /* 8 for CRC + VLAN */
#define ETH_MIN_PACKET_SIZE 60
@ -819,7 +816,6 @@ struct bnx2x {
u16 def_att_idx;
u32 attn_state;
struct attn_route attn_group[MAX_DYNAMIC_ATTN_GRPS];
u32 nig_mask;
/* slow path ring */
struct eth_spe *spq;
@ -869,7 +865,6 @@ struct bnx2x {
struct work_struct reset_task;
struct timer_list timer;
int timer_interval;
int current_interval;
u16 fw_seq;

View File

@ -1089,8 +1089,7 @@ static void bnx2x_reuse_rx_skb(struct bnx2x_fastpath *fp,
pci_dma_sync_single_for_device(bp->pdev,
pci_unmap_addr(cons_rx_buf, mapping),
bp->rx_offset + RX_COPY_THRESH,
PCI_DMA_FROMDEVICE);
RX_COPY_THRESH, PCI_DMA_FROMDEVICE);
prod_rx_buf->skb = cons_rx_buf->skb;
pci_unmap_addr_set(prod_rx_buf, mapping,
@ -2403,6 +2402,7 @@ static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted)
u32 nig_int_mask_addr = port ? NIG_REG_MASK_INTERRUPT_PORT1 :
NIG_REG_MASK_INTERRUPT_PORT0;
u32 aeu_mask;
u32 nig_mask = 0;
if (bp->attn_state & asserted)
BNX2X_ERR("IGU ERROR\n");
@ -2428,7 +2428,7 @@ static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted)
bnx2x_acquire_phy_lock(bp);
/* save nig interrupt mask */
bp->nig_mask = REG_RD(bp, nig_int_mask_addr);
nig_mask = REG_RD(bp, nig_int_mask_addr);
REG_WR(bp, nig_int_mask_addr, 0);
bnx2x_link_attn(bp);
@ -2483,7 +2483,7 @@ static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted)
/* now set back the mask */
if (asserted & ATTN_NIG_FOR_FUNC) {
REG_WR(bp, nig_int_mask_addr, bp->nig_mask);
REG_WR(bp, nig_int_mask_addr, nig_mask);
bnx2x_release_phy_lock(bp);
}
}
@ -4358,7 +4358,7 @@ static void bnx2x_init_rx_rings(struct bnx2x *bp)
u16 ring_prod, cqe_ring_prod;
int i, j;
bp->rx_buf_size += bp->rx_offset + ETH_OVREHEAD + BNX2X_RX_ALIGN;
bp->rx_buf_size = bp->dev->mtu + ETH_OVREHEAD + BNX2X_RX_ALIGN;
DP(NETIF_MSG_IFUP,
"mtu %d rx_buf_size %d\n", bp->dev->mtu, bp->rx_buf_size);
@ -7947,6 +7947,7 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp)
static int __devinit bnx2x_init_bp(struct bnx2x *bp)
{
int func = BP_FUNC(bp);
int timer_interval;
int rc;
/* Disable interrupt handling until HW is initialized */
@ -7994,13 +7995,12 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp)
bp->rx_ring_size = MAX_RX_AVAIL;
bp->rx_csum = 1;
bp->rx_offset = 0;
bp->tx_ticks = 50;
bp->rx_ticks = 25;
bp->timer_interval = (CHIP_REV_IS_SLOW(bp) ? 5*HZ : HZ);
bp->current_interval = (poll ? poll : bp->timer_interval);
timer_interval = (CHIP_REV_IS_SLOW(bp) ? 5*HZ : HZ);
bp->current_interval = (poll ? poll : timer_interval);
init_timer(&bp->timer);
bp->timer.expires = jiffies + bp->current_interval;
@ -10828,9 +10828,8 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
goto init_one_exit;
}
bp->common.name = board_info[ent->driver_data].name;
printk(KERN_INFO "%s: %s (%c%d) PCI-E x%d %s found at mem %lx,"
" IRQ %d, ", dev->name, bp->common.name,
" IRQ %d, ", dev->name, board_info[ent->driver_data].name,
(CHIP_REV(bp) >> 12) + 'A', (CHIP_METAL(bp) >> 4),
bnx2x_get_pcie_width(bp),
(bnx2x_get_pcie_speed(bp) == 2) ? "5GHz (Gen2)" : "2.5GHz",