wl1271: Fix SG configuration message structures

The bluetooth coexistence (SG) configuration messages have changed and
were completely wrong. For instance, intending to enable the SG, it was
instead disabled.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This commit is contained in:
Juuso Oikarinen 2010-03-18 12:26:29 +02:00 committed by John W. Linville
parent 93f56be146
commit 885c990744
2 changed files with 68 additions and 73 deletions

View File

@ -547,7 +547,7 @@ int wl1271_acx_sg_enable(struct wl1271 *wl)
goto out;
}
pta->enable = SG_ENABLE;
pta->enable = ACX_SG_DISABLE;
ret = wl1271_cmd_configure(wl, ACX_SG_ENABLE, pta, sizeof(*pta));
if (ret < 0) {
@ -575,19 +575,8 @@ int wl1271_acx_sg_cfg(struct wl1271 *wl)
}
/* BT-WLAN coext parameters */
param->per_threshold = cpu_to_le32(c->per_threshold);
param->max_scan_compensation_time =
cpu_to_le32(c->max_scan_compensation_time);
param->nfs_sample_interval = cpu_to_le16(c->nfs_sample_interval);
param->load_ratio = c->load_ratio;
param->auto_ps_mode = c->auto_ps_mode;
param->probe_req_compensation = c->probe_req_compensation;
param->scan_window_compensation = c->scan_window_compensation;
param->antenna_config = c->antenna_config;
param->beacon_miss_threshold = c->beacon_miss_threshold;
param->rate_adaptation_threshold =
cpu_to_le32(c->rate_adaptation_threshold);
param->rate_adaptation_snr = c->rate_adaptation_snr;
param->params[ACX_SG_BT_PER_THRESHOLD] = c->per_threshold;
param->param_idx = ACX_SG_BT_PER_THRESHOLD;
ret = wl1271_cmd_configure(wl, ACX_SG_CFG, param, sizeof(*param));
if (ret < 0) {

View File

@ -393,28 +393,80 @@ struct acx_conn_monit_params {
} __attribute__ ((packed));
enum {
SG_ENABLE = 0,
SG_DISABLE,
SG_SENSE_NO_ACTIVITY,
SG_SENSE_ACTIVE
ACX_SG_DISABLE = 0,
ACX_SG_PROTECTIVE,
ACX_SG_OPPORTUNISTIC
};
struct acx_bt_wlan_coex {
struct acx_header header;
/*
* 0 -> PTA enabled
* 1 -> PTA disabled
* 2 -> sense no active mode, i.e.
* an interrupt is sent upon
* BT activity.
* 3 -> PTA is switched on in response
* to the interrupt sending.
*/
u8 enable;
u8 pad[3];
} __attribute__ ((packed));
enum {
ACX_SG_BT_PER_THRESHOLD = 0,
ACX_SG_HV3_MAX_OVERRIDE,
ACX_SG_BT_NFS_SAMPLE_INTERVAL,
ACX_SG_BT_LOAD_RATIO,
ACX_SG_AUTO_PS_MODE,
ACX_SG_AUTO_SCAN_PROBE_REQ,
ACX_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3,
ACX_SG_ANTENNA_CONFIGURATION,
ACX_SG_BEACON_MISS_PERCENT,
ACX_SG_RATE_ADAPT_THRESH,
ACX_SG_RATE_ADAPT_SNR,
ACX_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR,
ACX_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR,
ACX_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR,
ACX_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR,
ACX_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR,
ACX_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR,
ACX_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR,
ACX_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR,
ACX_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR,
ACX_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR,
ACX_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR,
ACX_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR,
ACX_SG_RXT,
ACX_SG_TXT,
ACX_SG_ADAPTIVE_RXT_TXT,
ACX_SG_PS_POLL_TIMEOUT,
ACX_SG_UPSD_TIMEOUT,
ACX_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR,
ACX_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR,
ACX_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR,
ACX_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR,
ACX_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR,
ACX_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR,
ACX_SG_WLAN_ACTIVE_BT_ACL_MIN_BR,
ACX_SG_WLAN_ACTIVE_BT_ACL_MAX_BR,
ACX_SG_WLAN_ACTIVE_MAX_BT_ACL_BR,
ACX_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3,
ACX_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP,
ACX_SG_PASSIVE_SCAN_A2DP_BT_TIME,
ACX_SG_PASSIVE_SCAN_A2DP_WLAN_TIME,
ACX_SG_HV3_MAX_SERVED,
ACX_SG_DHCP_TIME,
ACX_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP,
ACX_SG_TEMP_PARAM_1,
ACX_SG_TEMP_PARAM_2,
ACX_SG_TEMP_PARAM_3,
ACX_SG_TEMP_PARAM_4,
ACX_SG_TEMP_PARAM_5,
ACX_SG_PARAMS_MAX,
ACX_SG_PARAMS_ALL = 0xff
};
struct acx_bt_wlan_coex_param {
struct acx_header header;
__le32 params[ACX_SG_PARAMS_MAX];
u8 param_idx;
u8 padding[3];
} __attribute__ ((packed));
struct acx_dco_itrim_params {
struct acx_header header;
@ -423,52 +475,6 @@ struct acx_dco_itrim_params {
__le32 timeout;
} __attribute__ ((packed));
#define PTA_ANTENNA_TYPE_DEF (0)
#define PTA_BT_HP_MAXTIME_DEF (2000)
#define PTA_WLAN_HP_MAX_TIME_DEF (5000)
#define PTA_SENSE_DISABLE_TIMER_DEF (1350)
#define PTA_PROTECTIVE_RX_TIME_DEF (1500)
#define PTA_PROTECTIVE_TX_TIME_DEF (1500)
#define PTA_TIMEOUT_NEXT_BT_LP_PACKET_DEF (3000)
#define PTA_SIGNALING_TYPE_DEF (1)
#define PTA_AFH_LEVERAGE_ON_DEF (0)
#define PTA_NUMBER_QUIET_CYCLE_DEF (0)
#define PTA_MAX_NUM_CTS_DEF (3)
#define PTA_NUMBER_OF_WLAN_PACKETS_DEF (2)
#define PTA_NUMBER_OF_BT_PACKETS_DEF (2)
#define PTA_PROTECTIVE_RX_TIME_FAST_DEF (1500)
#define PTA_PROTECTIVE_TX_TIME_FAST_DEF (3000)
#define PTA_CYCLE_TIME_FAST_DEF (8700)
#define PTA_RX_FOR_AVALANCHE_DEF (5)
#define PTA_ELP_HP_DEF (0)
#define PTA_ANTI_STARVE_PERIOD_DEF (500)
#define PTA_ANTI_STARVE_NUM_CYCLE_DEF (4)
#define PTA_ALLOW_PA_SD_DEF (1)
#define PTA_TIME_BEFORE_BEACON_DEF (6300)
#define PTA_HPDM_MAX_TIME_DEF (1600)
#define PTA_TIME_OUT_NEXT_WLAN_DEF (2550)
#define PTA_AUTO_MODE_NO_CTS_DEF (0)
#define PTA_BT_HP_RESPECTED_DEF (3)
#define PTA_WLAN_RX_MIN_RATE_DEF (24)
#define PTA_ACK_MODE_DEF (1)
struct acx_bt_wlan_coex_param {
struct acx_header header;
__le32 per_threshold;
__le32 max_scan_compensation_time;
__le16 nfs_sample_interval;
u8 load_ratio;
u8 auto_ps_mode;
u8 probe_req_compensation;
u8 scan_window_compensation;
u8 antenna_config;
u8 beacon_miss_threshold;
__le32 rate_adaptation_threshold;
s8 rate_adaptation_snr;
u8 padding[3];
} __attribute__ ((packed));
struct acx_energy_detection {
struct acx_header header;