diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig index 24987c89609a..06229026f78b 100644 --- a/arch/arm/configs/corgi_defconfig +++ b/arch/arm/configs/corgi_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc3 -# Sun Oct 9 15:46:42 2005 +# Linux kernel version: 2.6.15-rc2 +# Mon Nov 28 10:30:09 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -63,6 +63,23 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # System Type # @@ -85,6 +102,7 @@ CONFIG_ARCH_PXA=y # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_OMAP is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_AAEC2000 is not set @@ -98,12 +116,14 @@ CONFIG_ARCH_PXA=y CONFIG_PXA_SHARPSL=y CONFIG_PXA_SHARPSL_25x=y # CONFIG_PXA_SHARPSL_27x is not set -# CONFIG_MACH_POODLE is not set +CONFIG_MACH_POODLE=y CONFIG_MACH_CORGI=y CONFIG_MACH_SHEPHERD=y CONFIG_MACH_HUSKY=y +CONFIG_MACH_TOSA=y CONFIG_PXA25x=y CONFIG_PXA_SHARP_C7xx=y +CONFIG_PXA_SSP=y # # Processor Type @@ -155,6 +175,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_ALIGNMENT_TRAP=y # @@ -235,6 +256,10 @@ CONFIG_INET6_TUNNEL=m CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# # CONFIG_NETFILTER_NETLINK is not set # @@ -356,6 +381,10 @@ CONFIG_IP6_NF_RAW=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y @@ -413,6 +442,7 @@ CONFIG_IRCOMM=m # CONFIG_SMC_IRCC_FIR is not set # CONFIG_ALI_FIR is not set # CONFIG_VIA_FIR is not set +CONFIG_PXA_FICP=m CONFIG_BT=m CONFIG_BT_L2CAP=m CONFIG_BT_SCO=m @@ -431,7 +461,6 @@ CONFIG_BT_HCIUSB=m CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y -CONFIG_BT_HCIUART_BCSP_TXCRC=y CONFIG_BT_HCIBCM203X=m CONFIG_BT_HCIBPA10X=m CONFIG_BT_HCIBFUSB=m @@ -458,6 +487,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + # # Memory Technology Devices (MTD) # @@ -477,6 +511,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -531,6 +566,11 @@ CONFIG_MTD_NAND_IDS=y CONFIG_MTD_NAND_SHARPSL=y # CONFIG_MTD_NAND_NANDSIM is not set +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + # # Parallel port support # @@ -551,14 +591,6 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -625,6 +657,7 @@ CONFIG_SCSI_MULTI_LUN=y # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DEBUG is not set @@ -748,6 +781,7 @@ CONFIG_PPP_ASYNC=m # CONFIG_PPP_SYNC_TTY is not set # CONFIG_PPP_DEFLATE is not set CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set # CONFIG_PPPOE is not set # CONFIG_SLIP is not set # CONFIG_SHAPER is not set @@ -850,11 +884,15 @@ CONFIG_UNIX98_PTYS=y # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -889,6 +927,7 @@ CONFIG_I2C_PXA=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -957,7 +996,10 @@ CONFIG_VIDEO_DEV=m # CONFIG_VIDEO_SAA5246A is not set # CONFIG_VIDEO_SAA5249 is not set # CONFIG_TUNER_3036 is not set +# CONFIG_VIDEO_EM28XX is not set # CONFIG_VIDEO_OVCAMCHIP is not set +# CONFIG_VIDEO_AUDIO_DECODER is not set +# CONFIG_VIDEO_DECODER is not set # # Radio Adapters @@ -976,13 +1018,12 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y # CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_PXA is not set CONFIG_FB_W100=y -# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -991,6 +1032,7 @@ CONFIG_FB_W100=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -1087,15 +1129,15 @@ CONFIG_USB_SL811_CS=m # USB Device Class drivers # # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set - -# -# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem -# CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -1107,7 +1149,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set # # USB Input Devices @@ -1185,6 +1226,7 @@ CONFIG_USB_MON=y CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_ANYDATA is not set CONFIG_USB_SERIAL_BELKIN=m # CONFIG_USB_SERIAL_WHITEHEAT is not set CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m @@ -1340,6 +1382,7 @@ CONFIG_RAMFS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_SUMMARY=y CONFIG_JFFS2_COMPRESSION_OPTIONS=y CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -1466,7 +1509,9 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set CONFIG_FRAME_POINTER=y +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUG_USER is not set # CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y diff --git a/arch/arm/configs/poodle_defconfig b/arch/arm/configs/poodle_defconfig deleted file mode 100644 index 72822907759f..000000000000 --- a/arch/arm/configs/poodle_defconfig +++ /dev/null @@ -1,1015 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc3 -# Sun Oct 9 17:04:29 2005 -# -CONFIG_ARM=y -CONFIG_MMU=y -CONFIG_UID16=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_CALIBRATE_DELAY=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_EMBEDDED=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_OBSOLETE_MODPARM=y -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# System Type -# -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_L7200 is not set -CONFIG_ARCH_PXA=y -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set - -# -# Intel PXA2xx Implementations -# -# CONFIG_ARCH_LUBBOCK is not set -# CONFIG_MACH_MAINSTONE is not set -# CONFIG_ARCH_PXA_IDP is not set -CONFIG_PXA_SHARPSL=y -CONFIG_PXA_SHARPSL_25x=y -# CONFIG_PXA_SHARPSL_27x is not set -CONFIG_MACH_POODLE=y -# CONFIG_MACH_CORGI is not set -# CONFIG_MACH_SHEPHERD is not set -# CONFIG_MACH_HUSKY is not set -CONFIG_PXA25x=y - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WBI=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -CONFIG_XSCALE_PMU=y -CONFIG_SHARP_LOCOMO=y -CONFIG_SHARP_PARAM=y -CONFIG_SHARP_SCOOP=y - -# -# Bus support -# -CONFIG_ISA_DMA_API=y - -# -# PCCARD (PCMCIA/CardBus) support -# -CONFIG_PCCARD=y -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=y -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y - -# -# PC-card bridges -# -CONFIG_PCMCIA_PXA2XX=y - -# -# Kernel Features -# -CONFIG_PREEMPT=y -# CONFIG_NO_IDLE_HZ is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 debug" -# CONFIG_XIP_KERNEL is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_MISC=m -# CONFIG_ARTHUR is not set - -# -# Power management options -# -CONFIG_PM=y -CONFIG_APM=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set - -# -# RAM/ROM/Flash chip drivers -# -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_SHARP_SL=y -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y -# CONFIG_MTD_NAND_H1900 is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_SHARPSL=y -# CONFIG_MTD_NAND_NANDSIM is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=y -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set -# CONFIG_PCMCIA_WAVELAN is not set -# CONFIG_PCMCIA_NETWAVE is not set - -# -# Wireless 802.11 Frequency Hopping cards support -# -# CONFIG_PCMCIA_RAYCS is not set - -# -# Wireless 802.11b ISA/PCI cards support -# -# CONFIG_HERMES is not set -# CONFIG_ATMEL is not set - -# -# Wireless 802.11b Pcmcia/Cardbus cards support -# -# CONFIG_AIRO_CS is not set -# CONFIG_PCMCIA_WL3501 is not set -# CONFIG_HOSTAP is not set -CONFIG_NET_WIRELESS=y - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -# CONFIG_PCMCIA_3C589 is not set -# CONFIG_PCMCIA_3C574 is not set -# CONFIG_PCMCIA_FMVJ18X is not set -CONFIG_PCMCIA_PCNET=y -# CONFIG_PCMCIA_NMCLAN is not set -# CONFIG_PCMCIA_SMC91C92 is not set -# CONFIG_PCMCIA_XIRC2PS is not set -# CONFIG_PCMCIA_AXNET is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -# CONFIG_PPP_SYNC_TTY is not set -# CONFIG_PPP_DEFLATE is not set -CONFIG_PPP_BSDCOMP=m -# CONFIG_PPPOE is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_TSDEV=y -CONFIG_INPUT_TSDEV_SCREEN_X=240 -CONFIG_INPUT_TSDEV_SCREEN_Y=320 -CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_EVBUG=y - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -CONFIG_KEYBOARD_LOCOMO=y -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_CORGI is not set -CONFIG_KEYBOARD_SPITZ=y -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_PXA=y -CONFIG_SERIAL_PXA_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# - -# -# PCMCIA character devices -# -# CONFIG_SYNCLINK_CS is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# - -# -# I2C support -# -CONFIG_I2C=y -# CONFIG_I2C_CHARDEV is not set - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_PXA is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -CONFIG_I2C_DEBUG_CORE=y -CONFIG_I2C_DEBUG_ALGO=y -CONFIG_I2C_DEBUG_BUS=y -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -CONFIG_VIDEO_DEV=m - -# -# Video For Linux -# - -# -# Video Adapters -# -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_TUNER_3036 is not set -# CONFIG_VIDEO_OVCAMCHIP is not set - -# -# Radio Adapters -# -# CONFIG_RADIO_MAESTRO is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FB=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y -# CONFIG_FB_MACMODES is not set -CONFIG_FB_MODE_HELPERS=y -# CONFIG_FB_TILEBLITTING is not set -CONFIG_FB_PXA=y -# CONFIG_FB_W100 is not set -# CONFIG_FB_PXA_PARAMETERS is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -# CONFIG_FONT_8x16 is not set -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -# CONFIG_FONT_10x18 is not set - -# -# Logo configuration -# -# CONFIG_LOGO is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB is not set - -# -# USB Gadget Support -# -CONFIG_USB_GADGET=y -# CONFIG_USB_GADGET_DEBUG_FILES is not set -CONFIG_USB_GADGET_SELECTED=y -# CONFIG_USB_GADGET_NET2280 is not set -CONFIG_USB_GADGET_PXA2XX=y -CONFIG_USB_PXA2XX=y -# CONFIG_USB_PXA2XX_SMALL is not set -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set -# CONFIG_USB_GADGET_DUALSPEED is not set -# CONFIG_USB_ZERO is not set -CONFIG_USB_ETH=y -CONFIG_USB_ETH_RNDIS=y -# CONFIG_USB_GADGETFS is not set -# CONFIG_USB_FILE_STORAGE is not set -# CONFIG_USB_G_SERIAL is not set - -# -# MMC/SD Card support -# -CONFIG_MMC=y -CONFIG_MMC_DEBUG=y -CONFIG_MMC_BLOCK=y -CONFIG_MMC_PXA=y -# CONFIG_MMC_WBSD is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -# CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -CONFIG_JFFS2_RUBIN=y -# CONFIG_JFFS2_CMODE_NONE is not set -CONFIG_JFFS2_CMODE_PRIORITY=y -# CONFIG_JFFS2_CMODE_SIZE is not set -CONFIG_CRAMFS=m -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -# CONFIG_NFS_FS is not set -# CONFIG_NFSD is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="cp437" -CONFIG_NLS_CODEPAGE_437=y -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=y - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_PREEMPT=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set -CONFIG_FRAME_POINTER=y -# CONFIG_DEBUG_USER is not set -# CONFIG_DEBUG_WAITQ is not set -CONFIG_DEBUG_ERRORS=y -# CONFIG_DEBUG_LL is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_CRC_CCITT=y -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig index 900e04f8e38c..18e9beaec465 100644 --- a/arch/arm/configs/spitz_defconfig +++ b/arch/arm/configs/spitz_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc3 -# Sun Oct 9 17:11:19 2005 +# Linux kernel version: 2.6.15-rc2 +# Mon Nov 28 10:26:52 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -63,6 +63,23 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # System Type # @@ -85,6 +102,7 @@ CONFIG_ARCH_PXA=y # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_OMAP is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_AAEC2000 is not set @@ -98,10 +116,13 @@ CONFIG_ARCH_PXA=y CONFIG_PXA_SHARPSL=y # CONFIG_PXA_SHARPSL_25x is not set CONFIG_PXA_SHARPSL_27x=y +CONFIG_MACH_AKITA=y CONFIG_MACH_SPITZ=y CONFIG_MACH_BORZOI=y CONFIG_PXA27x=y +CONFIG_IWMMXT=y CONFIG_PXA_SHARP_Cxx00=y +CONFIG_PXA_SSP=y # # Processor Type @@ -153,6 +174,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_ALIGNMENT_TRAP=y # @@ -233,6 +255,10 @@ CONFIG_INET6_TUNNEL=m CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# # CONFIG_NETFILTER_NETLINK is not set # @@ -354,6 +380,10 @@ CONFIG_IP6_NF_RAW=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y @@ -411,6 +441,7 @@ CONFIG_IRCOMM=m # CONFIG_SMC_IRCC_FIR is not set # CONFIG_ALI_FIR is not set # CONFIG_VIA_FIR is not set +CONFIG_PXA_FICP=m CONFIG_BT=m CONFIG_BT_L2CAP=m CONFIG_BT_SCO=m @@ -429,7 +460,6 @@ CONFIG_BT_HCIUSB=m CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y -CONFIG_BT_HCIUART_BCSP_TXCRC=y CONFIG_BT_HCIBCM203X=m CONFIG_BT_HCIBPA10X=m CONFIG_BT_HCIBFUSB=m @@ -456,6 +486,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + # # Memory Technology Devices (MTD) # @@ -475,6 +510,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -529,6 +565,11 @@ CONFIG_MTD_NAND_IDS=y CONFIG_MTD_NAND_SHARPSL=y # CONFIG_MTD_NAND_NANDSIM is not set +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + # # Parallel port support # @@ -549,14 +590,6 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -623,6 +656,7 @@ CONFIG_SCSI_MULTI_LUN=y # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DEBUG is not set @@ -746,6 +780,7 @@ CONFIG_PPP_ASYNC=m # CONFIG_PPP_SYNC_TTY is not set # CONFIG_PPP_DEFLATE is not set CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set # CONFIG_PPPOE is not set # CONFIG_SLIP is not set # CONFIG_SHAPER is not set @@ -771,6 +806,7 @@ CONFIG_INPUT=y # CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set +# CONFIG_INPUT_POWER is not set # # Input Device Drivers @@ -848,11 +884,15 @@ CONFIG_UNIX98_PTYS=y # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -891,14 +931,13 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y # CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set -CONFIG_FB_PXA=y -# CONFIG_FB_W100 is not set -# CONFIG_FB_PXA_PARAMETERS is not set # CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +# CONFIG_FB_PXA_PARAMETERS is not set +# CONFIG_FB_W100 is not set # CONFIG_FB_VIRTUAL is not set # @@ -907,6 +946,7 @@ CONFIG_FB_PXA=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -965,15 +1005,15 @@ CONFIG_USB_SL811_CS=m # # USB Device Class drivers # - -# -# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem -# CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -985,7 +1025,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set # # USB Input Devices @@ -1058,6 +1097,7 @@ CONFIG_USB_MON=y CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_ANYDATA is not set CONFIG_USB_SERIAL_BELKIN=m # CONFIG_USB_SERIAL_WHITEHEAT is not set CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m @@ -1218,6 +1258,7 @@ CONFIG_RAMFS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_SUMMARY=y CONFIG_JFFS2_COMPRESSION_OPTIONS=y CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -1344,7 +1385,9 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set CONFIG_FRAME_POINTER=y +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUG_USER is not set # CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 8d8748407cbe..d7d69fd7039f 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -17,7 +17,6 @@ #include #include -#include #include #include #include @@ -83,7 +82,7 @@ ENTRY(stext) @ and irqs disabled bl __lookup_processor_type @ r5=procinfo r9=cpuid movs r10, r5 @ invalid processor (r5=0)? - beq __error_p @ yes, error 'p' + beq __error_p @ yes, error 'p' bl __lookup_machine_type @ r5=machinfo movs r8, r5 @ invalid machine (r5=0)? beq __error_a @ yes, error 'a' @@ -343,16 +342,12 @@ __create_page_tables: bne 1b #if defined(CONFIG_ARCH_NETWINDER) || defined(CONFIG_ARCH_CATS) /* - * If we're using the NetWinder, we need to map in - * the 16550-type serial port for the debug messages + * If we're using the NetWinder or CATS, we also need to map + * in the 16550-type serial port for the debug messages */ - teq r1, #MACH_TYPE_NETWINDER - teqne r1, #MACH_TYPE_CATS - bne 1f add r0, r4, #0xff000000 >> 18 orr r3, r7, #0x7c000000 str r3, [r0] -1: #endif #ifdef CONFIG_ARCH_RPC /* diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index cd506646801a..526acbc32067 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -44,6 +44,7 @@ config PXA_SHARPSL_25x config PXA_SHARPSL_27x bool "Sharp PXA270 models (SL-Cxx00)" select PXA27x + select IWMMXT endchoice @@ -60,7 +61,6 @@ config MACH_CORGI bool "Enable Sharp SL-C700 (Corgi) Support" depends PXA_SHARPSL_25x select PXA_SHARP_C7xx - select PXA_SSP config MACH_SHEPHERD bool "Enable Sharp SL-C750 (Shepherd) Support" @@ -90,7 +90,7 @@ config MACH_BORZOI config MACH_TOSA bool "Enable Sharp SL-6000x (Tosa) Support" - depends PXA_SHARPSL + depends PXA_SHARPSL_25x config PXA25x bool diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index e2c6fa23d3cd..af6580f1ceb8 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -30,7 +30,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/consistent.c index 47b0b767f080..dbfe9e891f01 100644 --- a/arch/arm/mm/consistent.c +++ b/arch/arm/mm/consistent.c @@ -66,6 +66,7 @@ struct vm_region { unsigned long vm_start; unsigned long vm_end; struct page *vm_pages; + int vm_active; }; static struct vm_region consistent_head = { @@ -104,6 +105,7 @@ vm_region_alloc(struct vm_region *head, size_t size, gfp_t gfp) list_add_tail(&new->vm_list, &c->vm_list); new->vm_start = addr; new->vm_end = addr + size; + new->vm_active = 1; spin_unlock_irqrestore(&consistent_lock, flags); return new; @@ -120,7 +122,7 @@ static struct vm_region *vm_region_find(struct vm_region *head, unsigned long ad struct vm_region *c; list_for_each_entry(c, &head->vm_list, vm_list) { - if (c->vm_start == addr) + if (c->vm_active && c->vm_start == addr) goto out; } c = NULL; @@ -319,6 +321,7 @@ EXPORT_SYMBOL(dma_mmap_writecombine); /* * free a page as defined by the above mapping. + * Must not be called with IRQs disabled. */ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle) { @@ -326,14 +329,18 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr unsigned long flags, addr; pte_t *ptep; + WARN_ON(irqs_disabled()); + size = PAGE_ALIGN(size); spin_lock_irqsave(&consistent_lock, flags); - c = vm_region_find(&consistent_head, (unsigned long)cpu_addr); if (!c) goto no_area; + c->vm_active = 0; + spin_unlock_irqrestore(&consistent_lock, flags); + if ((c->vm_end - c->vm_start) != size) { printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n", __func__, c->vm_end - c->vm_start, size); @@ -372,8 +379,8 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr flush_tlb_kernel_range(c->vm_start, c->vm_end); + spin_lock_irqsave(&consistent_lock, flags); list_del(&c->vm_list); - spin_unlock_irqrestore(&consistent_lock, flags); kfree(c); diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 048c9c19aa4f..465487470d0e 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Fri Nov 11 21:55:04 2005 +# Last update: Fri Nov 25 14:43:04 2005 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -857,12 +857,12 @@ osiris MACH_OSIRIS OSIRIS 842 maestro MACH_MAESTRO MAESTRO 843 tunge2 MACH_TUNGE2 TUNGE2 844 ixbbm MACH_IXBBM IXBBM 845 -mx27 MACH_MX27 MX27 846 +mx27ads MACH_MX27 MX27 846 ax8004 MACH_AX8004 AX8004 847 at91sam9261ek MACH_AT91SAM9261EK AT91SAM9261EK 848 loft MACH_LOFT LOFT 849 magpie MACH_MAGPIE MAGPIE 850 -mx21 MACH_MX21 MX21 851 +mx21ads MACH_MX21 MX21 851 mb87m3400 MACH_MB87M3400 MB87M3400 852 mguard_delta MACH_MGUARD_DELTA MGUARD_DELTA 853 davinci_dvdp MACH_DAVINCI_DVDP DAVINCI_DVDP 854 @@ -897,10 +897,16 @@ omi_board MACH_OMI_BOARD OMI_BOARD 882 mx21civ MACH_MX21CIV MX21CIV 883 mahi_cdac MACH_MAHI_CDAC MAHI_CDAC 884 xscale_palmtx MACH_XSCALE_PALMTX XSCALE_PALMTX 885 -arch_s3c2413 MACH_ARCH_S3C2413 ARCH_S3C2413 886 s3c2413 MACH_S3C2413 S3C2413 887 samsys_ep0 MACH_SAMSYS_EP0 SAMSYS_EP0 888 wg302v1 MACH_WG302V1 WG302V1 889 wg302v2 MACH_WG302V2 WG302V2 890 eb42x MACH_EB42X EB42X 891 iq331es MACH_IQ331ES IQ331ES 892 +cosydsp MACH_COSYDSP COSYDSP 893 +uplat7d MACH_UPLAT7D UPLAT7D 894 +ptdavinci MACH_PTDAVINCI PTDAVINCI 895 +mbus MACH_MBUS MBUS 896 +nadia2vb MACH_NADIA2VB NADIA2VB 897 +r1000 MACH_R1000 R1000 898 +hw90250 MACH_HW90250 HW90250 899 diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h index cb33d57c146c..7f1be48ad67e 100644 --- a/include/asm-arm/arch-s3c2410/regs-gpio.h +++ b/include/asm-arm/arch-s3c2410/regs-gpio.h @@ -21,6 +21,7 @@ * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA * 28-Mar-2005 LCVR Fixed definition of GPB10 * 26-Oct-2005 BJD Added generic configuration types + * 27-Nov-2005 LCVR Added definitions to S3C2400 registers */ @@ -54,12 +55,16 @@ #define S3C2410_GPIOREG(x) ((x) + S3C24XX_VA_GPIO) -/* port A - 22bits, zero in bit X makes pin X output +/* port A - S3C2410: 22bits, zero in bit X makes pin X output + * S3C2400: 18bits, zero in bit X makes pin X output * 1 makes port special function, this is default */ #define S3C2410_GPACON S3C2410_GPIOREG(0x00) #define S3C2410_GPADAT S3C2410_GPIOREG(0x04) +#define S3C2400_GPACON S3C2410_GPIOREG(0x00) +#define S3C2400_GPADAT S3C2410_GPIOREG(0x04) + #define S3C2410_GPA0 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 0) #define S3C2410_GPA0_OUT (0<<0) #define S3C2410_GPA0_ADDR0 (1<<0) @@ -103,34 +108,42 @@ #define S3C2410_GPA10 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 10) #define S3C2410_GPA10_OUT (0<<10) #define S3C2410_GPA10_ADDR25 (1<<10) +#define S3C2400_GPA10_SCKE (1<<10) #define S3C2410_GPA11 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 11) #define S3C2410_GPA11_OUT (0<<11) #define S3C2410_GPA11_ADDR26 (1<<11) +#define S3C2400_GPA11_nCAS0 (1<<11) #define S3C2410_GPA12 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 12) #define S3C2410_GPA12_OUT (0<<12) #define S3C2410_GPA12_nGCS1 (1<<12) +#define S3C2400_GPA12_nCAS1 (1<<12) #define S3C2410_GPA13 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 13) #define S3C2410_GPA13_OUT (0<<13) #define S3C2410_GPA13_nGCS2 (1<<13) +#define S3C2400_GPA13_nGCS1 (1<<13) #define S3C2410_GPA14 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 14) #define S3C2410_GPA14_OUT (0<<14) #define S3C2410_GPA14_nGCS3 (1<<14) +#define S3C2400_GPA14_nGCS2 (1<<14) #define S3C2410_GPA15 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 15) #define S3C2410_GPA15_OUT (0<<15) #define S3C2410_GPA15_nGCS4 (1<<15) +#define S3C2400_GPA15_nGCS3 (1<<15) #define S3C2410_GPA16 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 16) #define S3C2410_GPA16_OUT (0<<16) #define S3C2410_GPA16_nGCS5 (1<<16) +#define S3C2400_GPA16_nGCS4 (1<<16) #define S3C2410_GPA17 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 17) #define S3C2410_GPA17_OUT (0<<17) #define S3C2410_GPA17_CLE (1<<17) +#define S3C2400_GPA17_nGCS5 (1<<17) #define S3C2410_GPA18 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 18) #define S3C2410_GPA18_OUT (0<<18) @@ -152,10 +165,16 @@ #define S3C2410_GPA22_OUT (0<<22) #define S3C2410_GPA22_nFCE (1<<22) -/* 0x08 and 0x0c are reserved */ +/* 0x08 and 0x0c are reserved on S3C2410 */ -/* GPB is 10 IO pins, each configured by 2 bits each in GPBCON. +/* S3C2410: + * GPB is 10 IO pins, each configured by 2 bits each in GPBCON. * 00 = input, 01 = output, 10=special function, 11=reserved + + * S3C2400: + * GPB is 16 IO pins, each configured by 2 bits each in GPBCON. + * 00 = input, 01 = output, 10=data, 11=special function + * bit 0,1 = pin 0, 2,3= pin 1... * * CPBUP = pull up resistor control, 1=disabled, 0=enabled @@ -165,63 +184,113 @@ #define S3C2410_GPBDAT S3C2410_GPIOREG(0x14) #define S3C2410_GPBUP S3C2410_GPIOREG(0x18) +#define S3C2400_GPBCON S3C2410_GPIOREG(0x08) +#define S3C2400_GPBDAT S3C2410_GPIOREG(0x0C) +#define S3C2400_GPBUP S3C2410_GPIOREG(0x10) + /* no i/o pin in port b can have value 3! */ #define S3C2410_GPB0 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0) #define S3C2410_GPB0_INP (0x00 << 0) #define S3C2410_GPB0_OUTP (0x01 << 0) #define S3C2410_GPB0_TOUT0 (0x02 << 0) +#define S3C2400_GPB0_DATA16 (0x02 << 0) #define S3C2410_GPB1 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 1) #define S3C2410_GPB1_INP (0x00 << 2) #define S3C2410_GPB1_OUTP (0x01 << 2) #define S3C2410_GPB1_TOUT1 (0x02 << 2) +#define S3C2400_GPB1_DATA17 (0x02 << 2) #define S3C2410_GPB2 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 2) #define S3C2410_GPB2_INP (0x00 << 4) #define S3C2410_GPB2_OUTP (0x01 << 4) #define S3C2410_GPB2_TOUT2 (0x02 << 4) +#define S3C2400_GPB2_DATA18 (0x02 << 4) +#define S3C2400_GPB2_TCLK1 (0x03 << 4) #define S3C2410_GPB3 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 3) #define S3C2410_GPB3_INP (0x00 << 6) #define S3C2410_GPB3_OUTP (0x01 << 6) #define S3C2410_GPB3_TOUT3 (0x02 << 6) +#define S3C2400_GPB3_DATA19 (0x02 << 6) +#define S3C2400_GPB3_TXD1 (0x03 << 6) #define S3C2410_GPB4 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 4) #define S3C2410_GPB4_INP (0x00 << 8) #define S3C2410_GPB4_OUTP (0x01 << 8) #define S3C2410_GPB4_TCLK0 (0x02 << 8) +#define S3C2400_GPB4_DATA20 (0x02 << 8) #define S3C2410_GPB4_MASK (0x03 << 8) +#define S3C2400_GPB4_RXD1 (0x03 << 8) +#define S3C2400_GPB4_MASK (0x03 << 8) #define S3C2410_GPB5 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 5) #define S3C2410_GPB5_INP (0x00 << 10) #define S3C2410_GPB5_OUTP (0x01 << 10) #define S3C2410_GPB5_nXBACK (0x02 << 10) +#define S3C2400_GPB5_DATA21 (0x02 << 10) +#define S3C2400_GPB5_nCTS1 (0x03 << 10) #define S3C2410_GPB6 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 6) #define S3C2410_GPB6_INP (0x00 << 12) #define S3C2410_GPB6_OUTP (0x01 << 12) #define S3C2410_GPB6_nXBREQ (0x02 << 12) +#define S3C2400_GPB6_DATA22 (0x02 << 12) +#define S3C2400_GPB6_nRTS1 (0x03 << 12) #define S3C2410_GPB7 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 7) #define S3C2410_GPB7_INP (0x00 << 14) #define S3C2410_GPB7_OUTP (0x01 << 14) #define S3C2410_GPB7_nXDACK1 (0x02 << 14) +#define S3C2400_GPB7_DATA23 (0x02 << 14) #define S3C2410_GPB8 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8) #define S3C2410_GPB8_INP (0x00 << 16) #define S3C2410_GPB8_OUTP (0x01 << 16) #define S3C2410_GPB8_nXDREQ1 (0x02 << 16) +#define S3C2400_GPB8_DATA24 (0x02 << 16) #define S3C2410_GPB9 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 9) #define S3C2410_GPB9_INP (0x00 << 18) #define S3C2410_GPB9_OUTP (0x01 << 18) #define S3C2410_GPB9_nXDACK0 (0x02 << 18) +#define S3C2400_GPB9_DATA25 (0x02 << 18) +#define S3C2400_GPB9_I2SSDI (0x03 << 18) #define S3C2410_GPB10 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 10) #define S3C2410_GPB10_INP (0x00 << 20) #define S3C2410_GPB10_OUTP (0x01 << 20) #define S3C2410_GPB10_nXDRE0 (0x02 << 20) +#define S3C2400_GPB10_DATA26 (0x02 << 20) +#define S3C2400_GPB10_nSS (0x03 << 20) + +#define S3C2400_GPB11 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 11) +#define S3C2400_GPB11_INP (0x00 << 22) +#define S3C2400_GPB11_OUTP (0x01 << 22) +#define S3C2400_GPB11_DATA27 (0x02 << 22) + +#define S3C2400_GPB12 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 12) +#define S3C2400_GPB12_INP (0x00 << 24) +#define S3C2400_GPB12_OUTP (0x01 << 24) +#define S3C2400_GPB12_DATA28 (0x02 << 24) + +#define S3C2400_GPB13 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 13) +#define S3C2400_GPB13_INP (0x00 << 26) +#define S3C2400_GPB13_OUTP (0x01 << 26) +#define S3C2400_GPB13_DATA29 (0x02 << 26) + +#define S3C2400_GPB14 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 14) +#define S3C2400_GPB14_INP (0x00 << 28) +#define S3C2400_GPB14_OUTP (0x01 << 28) +#define S3C2400_GPB14_DATA30 (0x02 << 28) + +#define S3C2400_GPB15 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 15) +#define S3C2400_GPB15_INP (0x00 << 30) +#define S3C2400_GPB15_OUTP (0x01 << 30) +#define S3C2400_GPB15_DATA31 (0x02 << 30) + +#define S3C2410_GPB_PUPDIS(x) (1<<(x)) /* Port C consits of 16 GPIO/Special function * @@ -233,150 +302,193 @@ #define S3C2410_GPCDAT S3C2410_GPIOREG(0x24) #define S3C2410_GPCUP S3C2410_GPIOREG(0x28) +#define S3C2400_GPCCON S3C2410_GPIOREG(0x14) +#define S3C2400_GPCDAT S3C2410_GPIOREG(0x18) +#define S3C2400_GPCUP S3C2410_GPIOREG(0x1C) + #define S3C2410_GPC0 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 0) #define S3C2410_GPC0_INP (0x00 << 0) #define S3C2410_GPC0_OUTP (0x01 << 0) #define S3C2410_GPC0_LEND (0x02 << 0) +#define S3C2400_GPC0_VD0 (0x02 << 0) #define S3C2410_GPC1 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 1) #define S3C2410_GPC1_INP (0x00 << 2) #define S3C2410_GPC1_OUTP (0x01 << 2) #define S3C2410_GPC1_VCLK (0x02 << 2) +#define S3C2400_GPC1_VD1 (0x02 << 2) #define S3C2410_GPC2 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 2) #define S3C2410_GPC2_INP (0x00 << 4) #define S3C2410_GPC2_OUTP (0x01 << 4) #define S3C2410_GPC2_VLINE (0x02 << 4) +#define S3C2400_GPC2_VD2 (0x02 << 4) #define S3C2410_GPC3 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 3) #define S3C2410_GPC3_INP (0x00 << 6) #define S3C2410_GPC3_OUTP (0x01 << 6) #define S3C2410_GPC3_VFRAME (0x02 << 6) +#define S3C2400_GPC3_VD3 (0x02 << 6) #define S3C2410_GPC4 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 4) #define S3C2410_GPC4_INP (0x00 << 8) #define S3C2410_GPC4_OUTP (0x01 << 8) #define S3C2410_GPC4_VM (0x02 << 8) +#define S3C2400_GPC4_VD4 (0x02 << 8) #define S3C2410_GPC5 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 5) #define S3C2410_GPC5_INP (0x00 << 10) #define S3C2410_GPC5_OUTP (0x01 << 10) #define S3C2410_GPC5_LCDVF0 (0x02 << 10) +#define S3C2400_GPC5_VD5 (0x02 << 10) #define S3C2410_GPC6 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 6) #define S3C2410_GPC6_INP (0x00 << 12) #define S3C2410_GPC6_OUTP (0x01 << 12) #define S3C2410_GPC6_LCDVF1 (0x02 << 12) +#define S3C2400_GPC6_VD6 (0x02 << 12) #define S3C2410_GPC7 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 7) #define S3C2410_GPC7_INP (0x00 << 14) #define S3C2410_GPC7_OUTP (0x01 << 14) #define S3C2410_GPC7_LCDVF2 (0x02 << 14) +#define S3C2400_GPC7_VD7 (0x02 << 14) #define S3C2410_GPC8 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 8) #define S3C2410_GPC8_INP (0x00 << 16) #define S3C2410_GPC8_OUTP (0x01 << 16) #define S3C2410_GPC8_VD0 (0x02 << 16) +#define S3C2400_GPC8_VD8 (0x02 << 16) #define S3C2410_GPC9 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 9) #define S3C2410_GPC9_INP (0x00 << 18) #define S3C2410_GPC9_OUTP (0x01 << 18) #define S3C2410_GPC9_VD1 (0x02 << 18) +#define S3C2400_GPC9_VD9 (0x02 << 18) #define S3C2410_GPC10 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 10) #define S3C2410_GPC10_INP (0x00 << 20) #define S3C2410_GPC10_OUTP (0x01 << 20) #define S3C2410_GPC10_VD2 (0x02 << 20) +#define S3C2400_GPC10_VD10 (0x02 << 20) #define S3C2410_GPC11 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 11) #define S3C2410_GPC11_INP (0x00 << 22) #define S3C2410_GPC11_OUTP (0x01 << 22) #define S3C2410_GPC11_VD3 (0x02 << 22) +#define S3C2400_GPC11_VD11 (0x02 << 22) #define S3C2410_GPC12 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 12) #define S3C2410_GPC12_INP (0x00 << 24) #define S3C2410_GPC12_OUTP (0x01 << 24) #define S3C2410_GPC12_VD4 (0x02 << 24) +#define S3C2400_GPC12_VD12 (0x02 << 24) #define S3C2410_GPC13 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 13) #define S3C2410_GPC13_INP (0x00 << 26) #define S3C2410_GPC13_OUTP (0x01 << 26) #define S3C2410_GPC13_VD5 (0x02 << 26) +#define S3C2400_GPC13_VD13 (0x02 << 26) #define S3C2410_GPC14 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 14) #define S3C2410_GPC14_INP (0x00 << 28) #define S3C2410_GPC14_OUTP (0x01 << 28) #define S3C2410_GPC14_VD6 (0x02 << 28) +#define S3C2400_GPC14_VD14 (0x02 << 28) #define S3C2410_GPC15 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 15) #define S3C2410_GPC15_INP (0x00 << 30) #define S3C2410_GPC15_OUTP (0x01 << 30) #define S3C2410_GPC15_VD7 (0x02 << 30) +#define S3C2400_GPC15_VD15 (0x02 << 30) -/* Port D consists of 16 GPIO/Special function +#define S3C2410_GPC_PUPDIS(x) (1<<(x)) + +/* + * S3C2410: Port D consists of 16 GPIO/Special function * * almost identical setup to port b, but the special functions are mostly * to do with the video system's data. + * + * S3C2400: Port D consists of 11 GPIO/Special function + * + * almost identical setup to port c */ #define S3C2410_GPDCON S3C2410_GPIOREG(0x30) #define S3C2410_GPDDAT S3C2410_GPIOREG(0x34) #define S3C2410_GPDUP S3C2410_GPIOREG(0x38) +#define S3C2400_GPDCON S3C2410_GPIOREG(0x20) +#define S3C2400_GPDDAT S3C2410_GPIOREG(0x24) +#define S3C2400_GPDUP S3C2410_GPIOREG(0x28) + #define S3C2410_GPD0 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 0) #define S3C2410_GPD0_INP (0x00 << 0) #define S3C2410_GPD0_OUTP (0x01 << 0) #define S3C2410_GPD0_VD8 (0x02 << 0) +#define S3C2400_GPD0_VFRAME (0x02 << 0) #define S3C2410_GPD1 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 1) #define S3C2410_GPD1_INP (0x00 << 2) #define S3C2410_GPD1_OUTP (0x01 << 2) #define S3C2410_GPD1_VD9 (0x02 << 2) +#define S3C2400_GPD1_VM (0x02 << 2) #define S3C2410_GPD2 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 2) #define S3C2410_GPD2_INP (0x00 << 4) #define S3C2410_GPD2_OUTP (0x01 << 4) #define S3C2410_GPD2_VD10 (0x02 << 4) +#define S3C2400_GPD2_VLINE (0x02 << 4) #define S3C2410_GPD3 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 3) #define S3C2410_GPD3_INP (0x00 << 6) #define S3C2410_GPD3_OUTP (0x01 << 6) #define S3C2410_GPD3_VD11 (0x02 << 6) +#define S3C2400_GPD3_VCLK (0x02 << 6) #define S3C2410_GPD4 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 4) #define S3C2410_GPD4_INP (0x00 << 8) #define S3C2410_GPD4_OUTP (0x01 << 8) #define S3C2410_GPD4_VD12 (0x02 << 8) +#define S3C2400_GPD4_LEND (0x02 << 8) #define S3C2410_GPD5 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 5) #define S3C2410_GPD5_INP (0x00 << 10) #define S3C2410_GPD5_OUTP (0x01 << 10) #define S3C2410_GPD5_VD13 (0x02 << 10) +#define S3C2400_GPD5_TOUT0 (0x02 << 10) #define S3C2410_GPD6 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 6) #define S3C2410_GPD6_INP (0x00 << 12) #define S3C2410_GPD6_OUTP (0x01 << 12) #define S3C2410_GPD6_VD14 (0x02 << 12) +#define S3C2400_GPD6_TOUT1 (0x02 << 12) #define S3C2410_GPD7 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 7) #define S3C2410_GPD7_INP (0x00 << 14) #define S3C2410_GPD7_OUTP (0x01 << 14) #define S3C2410_GPD7_VD15 (0x02 << 14) +#define S3C2400_GPD7_TOUT2 (0x02 << 14) #define S3C2410_GPD8 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 8) #define S3C2410_GPD8_INP (0x00 << 16) #define S3C2410_GPD8_OUTP (0x01 << 16) #define S3C2410_GPD8_VD16 (0x02 << 16) +#define S3C2400_GPD8_TOUT3 (0x02 << 16) #define S3C2410_GPD9 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 9) #define S3C2410_GPD9_INP (0x00 << 18) #define S3C2410_GPD9_OUTP (0x01 << 18) #define S3C2410_GPD9_VD17 (0x02 << 18) +#define S3C2400_GPD9_TCLK0 (0x02 << 18) +#define S3C2410_GPD9_MASK (0x03 << 18) #define S3C2410_GPD10 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 10) #define S3C2410_GPD10_INP (0x00 << 20) #define S3C2410_GPD10_OUTP (0x01 << 20) #define S3C2410_GPD10_VD18 (0x02 << 20) +#define S3C2400_GPD10_nWAIT (0x02 << 20) #define S3C2410_GPD11 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 11) #define S3C2410_GPD11_INP (0x00 << 22) @@ -403,37 +515,56 @@ #define S3C2410_GPD15_OUTP (0x01 << 30) #define S3C2410_GPD15_VD23 (0x02 << 30) -/* Port E consists of 16 GPIO/Special function +#define S3C2410_GPD_PUPDIS(x) (1<<(x)) + +/* S3C2410: + * Port E consists of 16 GPIO/Special function * * again, the same as port B, but dealing with I2S, SDI, and * more miscellaneous functions + * + * S3C2400: + * Port E consists of 12 GPIO/Special function + * + * GPIO / interrupt inputs */ #define S3C2410_GPECON S3C2410_GPIOREG(0x40) #define S3C2410_GPEDAT S3C2410_GPIOREG(0x44) #define S3C2410_GPEUP S3C2410_GPIOREG(0x48) +#define S3C2400_GPECON S3C2410_GPIOREG(0x2C) +#define S3C2400_GPEDAT S3C2410_GPIOREG(0x30) +#define S3C2400_GPEUP S3C2410_GPIOREG(0x34) + #define S3C2410_GPE0 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 0) #define S3C2410_GPE0_INP (0x00 << 0) #define S3C2410_GPE0_OUTP (0x01 << 0) #define S3C2410_GPE0_I2SLRCK (0x02 << 0) +#define S3C2400_GPE0_EINT0 (0x02 << 0) #define S3C2410_GPE0_MASK (0x03 << 0) #define S3C2410_GPE1 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 1) #define S3C2410_GPE1_INP (0x00 << 2) #define S3C2410_GPE1_OUTP (0x01 << 2) #define S3C2410_GPE1_I2SSCLK (0x02 << 2) +#define S3C2400_GPE1_EINT1 (0x02 << 2) +#define S3C2400_GPE1_nSS (0x03 << 2) #define S3C2410_GPE1_MASK (0x03 << 2) #define S3C2410_GPE2 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 2) #define S3C2410_GPE2_INP (0x00 << 4) #define S3C2410_GPE2_OUTP (0x01 << 4) #define S3C2410_GPE2_CDCLK (0x02 << 4) +#define S3C2400_GPE2_EINT2 (0x02 << 4) +#define S3C2400_GPE2_I2SSDI (0x03 << 4) #define S3C2410_GPE3 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 3) #define S3C2410_GPE3_INP (0x00 << 6) #define S3C2410_GPE3_OUTP (0x01 << 6) #define S3C2410_GPE3_I2SSDI (0x02 << 6) +#define S3C2400_GPE3_EINT3 (0x02 << 6) +#define S3C2400_GPE3_nCTS1 (0x03 << 6) #define S3C2410_GPE3_nSS0 (0x03 << 6) #define S3C2410_GPE3_MASK (0x03 << 6) @@ -441,6 +572,8 @@ #define S3C2410_GPE4_INP (0x00 << 8) #define S3C2410_GPE4_OUTP (0x01 << 8) #define S3C2410_GPE4_I2SSDO (0x02 << 8) +#define S3C2400_GPE4_EINT4 (0x02 << 8) +#define S3C2400_GPE4_nRTS1 (0x03 << 8) #define S3C2410_GPE4_I2SSDI (0x03 << 8) #define S3C2410_GPE4_MASK (0x03 << 8) @@ -448,36 +581,46 @@ #define S3C2410_GPE5_INP (0x00 << 10) #define S3C2410_GPE5_OUTP (0x01 << 10) #define S3C2410_GPE5_SDCLK (0x02 << 10) +#define S3C2400_GPE5_EINT5 (0x02 << 10) +#define S3C2400_GPE5_TCLK1 (0x03 << 10) #define S3C2410_GPE6 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 6) #define S3C2410_GPE6_INP (0x00 << 12) #define S3C2410_GPE6_OUTP (0x01 << 12) #define S3C2410_GPE6_SDCMD (0x02 << 12) +#define S3C2400_GPE6_EINT6 (0x02 << 12) #define S3C2410_GPE7 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7) #define S3C2410_GPE7_INP (0x00 << 14) #define S3C2410_GPE7_OUTP (0x01 << 14) #define S3C2410_GPE7_SDDAT0 (0x02 << 14) +#define S3C2400_GPE7_EINT7 (0x02 << 14) #define S3C2410_GPE8 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8) #define S3C2410_GPE8_INP (0x00 << 16) #define S3C2410_GPE8_OUTP (0x01 << 16) #define S3C2410_GPE8_SDDAT1 (0x02 << 16) +#define S3C2400_GPE8_nXDACK0 (0x02 << 16) #define S3C2410_GPE9 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9) #define S3C2410_GPE9_INP (0x00 << 18) #define S3C2410_GPE9_OUTP (0x01 << 18) #define S3C2410_GPE9_SDDAT2 (0x02 << 18) +#define S3C2400_GPE9_nXDACK1 (0x02 << 18) +#define S3C2400_GPE9_nXBACK (0x03 << 18) #define S3C2410_GPE10 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 10) #define S3C2410_GPE10_INP (0x00 << 20) #define S3C2410_GPE10_OUTP (0x01 << 20) #define S3C2410_GPE10_SDDAT3 (0x02 << 20) +#define S3C2400_GPE10_nXDREQ0 (0x02 << 20) #define S3C2410_GPE11 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11) #define S3C2410_GPE11_INP (0x00 << 22) #define S3C2410_GPE11_OUTP (0x01 << 22) #define S3C2410_GPE11_SPIMISO0 (0x02 << 22) +#define S3C2400_GPE11_nXDREQ1 (0x02 << 22) +#define S3C2400_GPE11_nXBREQ (0x03 << 22) #define S3C2410_GPE12 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 12) #define S3C2410_GPE12_INP (0x00 << 24) @@ -509,7 +652,8 @@ #define S3C2410_GPE_PUPDIS(x) (1<<(x)) -/* Port F consists of 8 GPIO/Special function +/* S3C2410: + * Port F consists of 8 GPIO/Special function * * GPIO / interrupt inputs * @@ -517,100 +661,141 @@ * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 undefined * * pull up works like all other ports. + * + * S3C2400: + * Port F consists of 7 GPIO/Special function + * + * GPIO/serial/misc pins */ #define S3C2410_GPFCON S3C2410_GPIOREG(0x50) #define S3C2410_GPFDAT S3C2410_GPIOREG(0x54) #define S3C2410_GPFUP S3C2410_GPIOREG(0x58) +#define S3C2400_GPFCON S3C2410_GPIOREG(0x38) +#define S3C2400_GPFDAT S3C2410_GPIOREG(0x3C) +#define S3C2400_GPFUP S3C2410_GPIOREG(0x40) + #define S3C2410_GPF0 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 0) #define S3C2410_GPF0_INP (0x00 << 0) #define S3C2410_GPF0_OUTP (0x01 << 0) #define S3C2410_GPF0_EINT0 (0x02 << 0) +#define S3C2400_GPF0_RXD0 (0x02 << 0) #define S3C2410_GPF1 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 1) #define S3C2410_GPF1_INP (0x00 << 2) #define S3C2410_GPF1_OUTP (0x01 << 2) #define S3C2410_GPF1_EINT1 (0x02 << 2) +#define S3C2400_GPF1_RXD1 (0x02 << 2) +#define S3C2400_GPF1_IICSDA (0x03 << 2) #define S3C2410_GPF2 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 2) #define S3C2410_GPF2_INP (0x00 << 4) #define S3C2410_GPF2_OUTP (0x01 << 4) #define S3C2410_GPF2_EINT2 (0x02 << 4) +#define S3C2400_GPF2_TXD0 (0x02 << 4) #define S3C2410_GPF3 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 3) #define S3C2410_GPF3_INP (0x00 << 6) #define S3C2410_GPF3_OUTP (0x01 << 6) #define S3C2410_GPF3_EINT3 (0x02 << 6) +#define S3C2400_GPF3_TXD1 (0x02 << 6) +#define S3C2400_GPF3_IICSCL (0x03 << 6) #define S3C2410_GPF4 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 4) #define S3C2410_GPF4_INP (0x00 << 8) #define S3C2410_GPF4_OUTP (0x01 << 8) #define S3C2410_GPF4_EINT4 (0x02 << 8) +#define S3C2400_GPF4_nRTS0 (0x02 << 8) +#define S3C2400_GPF4_nXBACK (0x03 << 8) #define S3C2410_GPF5 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 5) #define S3C2410_GPF5_INP (0x00 << 10) #define S3C2410_GPF5_OUTP (0x01 << 10) #define S3C2410_GPF5_EINT5 (0x02 << 10) +#define S3C2400_GPF5_nCTS0 (0x02 << 10) +#define S3C2400_GPF5_nXBREQ (0x03 << 10) #define S3C2410_GPF6 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 6) #define S3C2410_GPF6_INP (0x00 << 12) #define S3C2410_GPF6_OUTP (0x01 << 12) #define S3C2410_GPF6_EINT6 (0x02 << 12) +#define S3C2400_GPF6_CLKOUT (0x02 << 12) #define S3C2410_GPF7 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 7) #define S3C2410_GPF7_INP (0x00 << 14) #define S3C2410_GPF7_OUTP (0x01 << 14) #define S3C2410_GPF7_EINT7 (0x02 << 14) -/* Port G consists of 8 GPIO/IRQ/Special function +#define S3C2410_GPF_PUPDIS(x) (1<<(x)) + +/* S3C2410: + * Port G consists of 8 GPIO/IRQ/Special function * * GPGCON has 2 bits for each of the input pins on port F * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func * * pull up works like all other ports. + * + * S3C2400: + * Port G consists of 10 GPIO/Special function */ #define S3C2410_GPGCON S3C2410_GPIOREG(0x60) #define S3C2410_GPGDAT S3C2410_GPIOREG(0x64) #define S3C2410_GPGUP S3C2410_GPIOREG(0x68) +#define S3C2400_GPGCON S3C2410_GPIOREG(0x44) +#define S3C2400_GPGDAT S3C2410_GPIOREG(0x48) +#define S3C2400_GPGUP S3C2410_GPIOREG(0x4C) + #define S3C2410_GPG0 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 0) #define S3C2410_GPG0_INP (0x00 << 0) #define S3C2410_GPG0_OUTP (0x01 << 0) #define S3C2410_GPG0_EINT8 (0x02 << 0) +#define S3C2400_GPG0_I2SLRCK (0x02 << 0) #define S3C2410_GPG1 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 1) #define S3C2410_GPG1_INP (0x00 << 2) #define S3C2410_GPG1_OUTP (0x01 << 2) #define S3C2410_GPG1_EINT9 (0x02 << 2) +#define S3C2400_GPG1_I2SSCLK (0x02 << 2) #define S3C2410_GPG2 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 2) #define S3C2410_GPG2_INP (0x00 << 4) #define S3C2410_GPG2_OUTP (0x01 << 4) #define S3C2410_GPG2_EINT10 (0x02 << 4) +#define S3C2400_GPG2_CDCLK (0x02 << 4) #define S3C2410_GPG3 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3) #define S3C2410_GPG3_INP (0x00 << 6) #define S3C2410_GPG3_OUTP (0x01 << 6) #define S3C2410_GPG3_EINT11 (0x02 << 6) +#define S3C2400_GPG3_I2SSDO (0x02 << 6) +#define S3C2400_GPG3_I2SSDI (0x03 << 6) #define S3C2410_GPG4 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 4) #define S3C2410_GPG4_INP (0x00 << 8) #define S3C2410_GPG4_OUTP (0x01 << 8) #define S3C2410_GPG4_EINT12 (0x02 << 8) +#define S3C2400_GPG4_MMCCLK (0x02 << 8) +#define S3C2400_GPG4_I2SSDI (0x03 << 8) #define S3C2410_GPG4_LCDPWREN (0x03 << 8) #define S3C2410_GPG5 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5) #define S3C2410_GPG5_INP (0x00 << 10) #define S3C2410_GPG5_OUTP (0x01 << 10) #define S3C2410_GPG5_EINT13 (0x02 << 10) +#define S3C2400_GPG5_MMCCMD (0x02 << 10) +#define S3C2400_GPG5_IICSDA (0x03 << 10) #define S3C2410_GPG5_SPIMISO1 (0x03 << 10) #define S3C2410_GPG6 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6) #define S3C2410_GPG6_INP (0x00 << 12) #define S3C2410_GPG6_OUTP (0x01 << 12) #define S3C2410_GPG6_EINT14 (0x02 << 12) +#define S3C2400_GPG6_MMCDAT (0x02 << 12) +#define S3C2400_GPG6_IICSCL (0x03 << 12) #define S3C2410_GPG6_SPIMOSI1 (0x03 << 12) #define S3C2410_GPG7 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 7) @@ -618,16 +803,22 @@ #define S3C2410_GPG7_OUTP (0x01 << 14) #define S3C2410_GPG7_EINT15 (0x02 << 14) #define S3C2410_GPG7_SPICLK1 (0x03 << 14) +#define S3C2400_GPG7_SPIMISO (0x02 << 14) +#define S3C2400_GPG7_IICSDA (0x03 << 14) #define S3C2410_GPG8 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 8) #define S3C2410_GPG8_INP (0x00 << 16) #define S3C2410_GPG8_OUTP (0x01 << 16) #define S3C2410_GPG8_EINT16 (0x02 << 16) +#define S3C2400_GPG8_SPIMOSI (0x02 << 16) +#define S3C2400_GPG8_IICSCL (0x03 << 16) #define S3C2410_GPG9 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 9) #define S3C2410_GPG9_INP (0x00 << 18) #define S3C2410_GPG9_OUTP (0x01 << 18) #define S3C2410_GPG9_EINT17 (0x02 << 18) +#define S3C2400_GPG9_SPICLK (0x02 << 18) +#define S3C2400_GPG9_MMCCLK (0x03 << 18) #define S3C2410_GPG10 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10) #define S3C2410_GPG10_INP (0x00 << 20) @@ -737,19 +928,27 @@ #define S3C2410_GPH10_CLKOUT1 (0x02 << 20) /* miscellaneous control */ - +#define S3C2400_MISCCR S3C2410_GPIOREG(0x54) #define S3C2410_MISCCR S3C2410_GPIOREG(0x80) #define S3C2410_DCLKCON S3C2410_GPIOREG(0x84) /* see clock.h for dclk definitions */ /* pullup control on databus */ -#define S3C2410_MISCCR_SPUCR_HEN (0) +#define S3C2410_MISCCR_SPUCR_HEN (0<<0) #define S3C2410_MISCCR_SPUCR_HDIS (1<<0) -#define S3C2410_MISCCR_SPUCR_LEN (0) +#define S3C2410_MISCCR_SPUCR_LEN (0<<1) #define S3C2410_MISCCR_SPUCR_LDIS (1<<1) -#define S3C2410_MISCCR_USBDEV (0) +#define S3C2400_MISCCR_SPUCR_LEN (0<<0) +#define S3C2400_MISCCR_SPUCR_LDIS (1<<0) +#define S3C2400_MISCCR_SPUCR_HEN (0<<1) +#define S3C2400_MISCCR_SPUCR_HDIS (1<<1) + +#define S3C2400_MISCCR_HZ_STOPEN (0<<2) +#define S3C2400_MISCCR_HZ_STOPPREV (1<<2) + +#define S3C2410_MISCCR_USBDEV (0<<3) #define S3C2410_MISCCR_USBHOST (1<<3) #define S3C2410_MISCCR_CLK0_MPLL (0<<4) @@ -785,7 +984,7 @@ * * Samsung datasheet p9-25 */ - +#define S3C2400_EXTINT0 S3C2410_GPIOREG(0x58) #define S3C2410_EXTINT0 S3C2410_GPIOREG(0x88) #define S3C2410_EXTINT1 S3C2410_GPIOREG(0x8C) #define S3C2410_EXTINT2 S3C2410_GPIOREG(0x90) @@ -833,5 +1032,21 @@ #define S3C2410_GSTATUS2_OFFRESET (1<<1) #define S3C2410_GSTATUS2_PONRESET (1<<0) +/* open drain control register */ +#define S3C2400_OPENCR S3C2410_GPIOREG(0x50) + +#define S3C2400_OPENCR_OPC_RXD1DIS (0<<0) +#define S3C2400_OPENCR_OPC_RXD1EN (1<<0) +#define S3C2400_OPENCR_OPC_TXD1DIS (0<<1) +#define S3C2400_OPENCR_OPC_TXD1EN (1<<1) +#define S3C2400_OPENCR_OPC_CMDDIS (0<<2) +#define S3C2400_OPENCR_OPC_CMDEN (1<<2) +#define S3C2400_OPENCR_OPC_DATDIS (0<<3) +#define S3C2400_OPENCR_OPC_DATEN (1<<3) +#define S3C2400_OPENCR_OPC_MISODIS (0<<4) +#define S3C2400_OPENCR_OPC_MISOEN (1<<4) +#define S3C2400_OPENCR_OPC_MOSIDIS (0<<5) +#define S3C2400_OPENCR_OPC_MOSIEN (1<<5) + #endif /* __ASM_ARCH_REGS_GPIO_H */ diff --git a/include/asm-arm/arch-sa1100/io.h b/include/asm-arm/arch-sa1100/io.h index 9d4fe6cf205b..040ccde7a11e 100644 --- a/include/asm-arm/arch-sa1100/io.h +++ b/include/asm-arm/arch-sa1100/io.h @@ -10,8 +10,6 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#include - #define IO_SPACE_LIMIT 0xffffffff /*